123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195 |
- /*
- * kirkwood_freq.c: cpufreq driver for the Marvell kirkwood
- *
- * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/clk.h>
- #include <linux/cpufreq.h>
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/io.h>
- #include <asm/proc-fns.h>
- #define CPU_SW_INT_BLK BIT(28)
- static struct priv
- {
- struct clk *cpu_clk;
- struct clk *ddr_clk;
- struct clk *powersave_clk;
- struct device *dev;
- void __iomem *base;
- } priv;
- #define STATE_CPU_FREQ 0x01
- #define STATE_DDR_FREQ 0x02
- /*
- * Kirkwood can swap the clock to the CPU between two clocks:
- *
- * - cpu clk
- * - ddr clk
- *
- * The frequencies are set at runtime before registering this table.
- */
- static struct cpufreq_frequency_table kirkwood_freq_table[] = {
- {0, STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */
- {0, STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */
- {0, 0, CPUFREQ_TABLE_END},
- };
- static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
- {
- return clk_get_rate(priv.powersave_clk) / 1000;
- }
- static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int index)
- {
- unsigned int state = kirkwood_freq_table[index].driver_data;
- unsigned long reg;
- local_irq_disable();
- /* Disable interrupts to the CPU */
- reg = readl_relaxed(priv.base);
- reg |= CPU_SW_INT_BLK;
- writel_relaxed(reg, priv.base);
- switch (state) {
- case STATE_CPU_FREQ:
- clk_set_parent(priv.powersave_clk, priv.cpu_clk);
- break;
- case STATE_DDR_FREQ:
- clk_set_parent(priv.powersave_clk, priv.ddr_clk);
- break;
- }
- /* Wait-for-Interrupt, while the hardware changes frequency */
- cpu_do_idle();
- /* Enable interrupts to the CPU */
- reg = readl_relaxed(priv.base);
- reg &= ~CPU_SW_INT_BLK;
- writel_relaxed(reg, priv.base);
- local_irq_enable();
- return 0;
- }
- /* Module init and exit code */
- static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy)
- {
- return cpufreq_generic_init(policy, kirkwood_freq_table, 5000);
- }
- static struct cpufreq_driver kirkwood_cpufreq_driver = {
- .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
- .get = kirkwood_cpufreq_get_cpu_frequency,
- .verify = cpufreq_generic_frequency_table_verify,
- .target_index = kirkwood_cpufreq_target,
- .init = kirkwood_cpufreq_cpu_init,
- .name = "kirkwood-cpufreq",
- .attr = cpufreq_generic_attr,
- };
- static int kirkwood_cpufreq_probe(struct platform_device *pdev)
- {
- struct device_node *np;
- struct resource *res;
- int err;
- priv.dev = &pdev->dev;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv.base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(priv.base))
- return PTR_ERR(priv.base);
- np = of_cpu_device_node_get(0);
- if (!np) {
- dev_err(&pdev->dev, "failed to get cpu device node\n");
- return -ENODEV;
- }
- priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk");
- if (IS_ERR(priv.cpu_clk)) {
- dev_err(priv.dev, "Unable to get cpuclk");
- return PTR_ERR(priv.cpu_clk);
- }
- clk_prepare_enable(priv.cpu_clk);
- kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
- priv.ddr_clk = of_clk_get_by_name(np, "ddrclk");
- if (IS_ERR(priv.ddr_clk)) {
- dev_err(priv.dev, "Unable to get ddrclk");
- err = PTR_ERR(priv.ddr_clk);
- goto out_cpu;
- }
- clk_prepare_enable(priv.ddr_clk);
- kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000;
- priv.powersave_clk = of_clk_get_by_name(np, "powersave");
- if (IS_ERR(priv.powersave_clk)) {
- dev_err(priv.dev, "Unable to get powersave");
- err = PTR_ERR(priv.powersave_clk);
- goto out_ddr;
- }
- clk_prepare_enable(priv.powersave_clk);
- of_node_put(np);
- np = NULL;
- err = cpufreq_register_driver(&kirkwood_cpufreq_driver);
- if (!err)
- return 0;
- dev_err(priv.dev, "Failed to register cpufreq driver");
- clk_disable_unprepare(priv.powersave_clk);
- out_ddr:
- clk_disable_unprepare(priv.ddr_clk);
- out_cpu:
- clk_disable_unprepare(priv.cpu_clk);
- of_node_put(np);
- return err;
- }
- static int kirkwood_cpufreq_remove(struct platform_device *pdev)
- {
- cpufreq_unregister_driver(&kirkwood_cpufreq_driver);
- clk_disable_unprepare(priv.powersave_clk);
- clk_disable_unprepare(priv.ddr_clk);
- clk_disable_unprepare(priv.cpu_clk);
- return 0;
- }
- static struct platform_driver kirkwood_cpufreq_platform_driver = {
- .probe = kirkwood_cpufreq_probe,
- .remove = kirkwood_cpufreq_remove,
- .driver = {
- .name = "kirkwood-cpufreq",
- },
- };
- module_platform_driver(kirkwood_cpufreq_platform_driver);
- MODULE_LICENSE("GPL v2");
- MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
- MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU");
- MODULE_ALIAS("platform:kirkwood-cpufreq");
|