| 1234567891011121314151617181920212223242526272829303132333435363738394041424344 |
- USB COMPARATOR OF TWL CHIPS
- TWL6030 USB COMPARATOR
- - compatible : Should be "ti,twl6030-usb"
- - interrupts : Two interrupt numbers to the cpu should be specified. First
- interrupt number is the otg interrupt number that raises ID interrupts when
- the controller has to act as host and the second interrupt number is the
- usb interrupt number that raises VBUS interrupts when the controller has to
- act as device
- - usb-supply : phandle to the regulator device tree node. It should be vusb
- if it is twl6030 or ldousb if it is twl6032 subclass.
- twl6030-usb {
- compatible = "ti,twl6030-usb";
- interrupts = < 4 10 >;
- };
- Board specific device node entry
- &twl6030-usb {
- usb-supply = <&vusb>;
- };
- TWL4030 USB PHY AND COMPARATOR
- - compatible : Should be "ti,twl4030-usb"
- - interrupts : The interrupt numbers to the cpu should be specified. First
- interrupt number is the otg interrupt number that raises ID interrupts
- and VBUS interrupts. The second interrupt number is optional.
- - <supply-name>-supply : phandle to the regulator device tree node.
- <supply-name> should be vusb1v5, vusb1v8 and vusb3v1
- - usb_mode : The mode used by the phy to connect to the controller. "1"
- specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
- If a sibling node is compatible "ti,twl4030-bci", then it will find
- this device and query it for USB power status.
- twl4030-usb {
- compatible = "ti,twl4030-usb";
- interrupts = < 10 4 >;
- usb1v5-supply = <&vusb1v5>;
- usb1v8-supply = <&vusb1v8>;
- usb3v1-supply = <&vusb3v1>;
- usb_mode = <1>;
- };
|
