123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990 |
- /*
- * HT handling
- *
- * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
- * Copyright 2002-2005, Instant802 Networks, Inc.
- * Copyright 2005-2006, Devicescape Software, Inc.
- * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
- * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
- * Copyright 2007-2010, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/ieee80211.h>
- #include <linux/slab.h>
- #include <linux/export.h>
- #include <net/mac80211.h>
- #include "ieee80211_i.h"
- #include "driver-ops.h"
- #include "wme.h"
- /**
- * DOC: TX A-MPDU aggregation
- *
- * Aggregation on the TX side requires setting the hardware flag
- * %IEEE80211_HW_AMPDU_AGGREGATION. The driver will then be handed
- * packets with a flag indicating A-MPDU aggregation. The driver
- * or device is responsible for actually aggregating the frames,
- * as well as deciding how many and which to aggregate.
- *
- * When TX aggregation is started by some subsystem (usually the rate
- * control algorithm would be appropriate) by calling the
- * ieee80211_start_tx_ba_session() function, the driver will be
- * notified via its @ampdu_action function, with the
- * %IEEE80211_AMPDU_TX_START action.
- *
- * In response to that, the driver is later required to call the
- * ieee80211_start_tx_ba_cb_irqsafe() function, which will really
- * start the aggregation session after the peer has also responded.
- * If the peer responds negatively, the session will be stopped
- * again right away. Note that it is possible for the aggregation
- * session to be stopped before the driver has indicated that it
- * is done setting it up, in which case it must not indicate the
- * setup completion.
- *
- * Also note that, since we also need to wait for a response from
- * the peer, the driver is notified of the completion of the
- * handshake by the %IEEE80211_AMPDU_TX_OPERATIONAL action to the
- * @ampdu_action callback.
- *
- * Similarly, when the aggregation session is stopped by the peer
- * or something calling ieee80211_stop_tx_ba_session(), the driver's
- * @ampdu_action function will be called with the action
- * %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail,
- * and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe().
- * Note that the sta can get destroyed before the BA tear down is
- * complete.
- */
- static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
- const u8 *da, u16 tid,
- u8 dialog_token, u16 start_seq_num,
- u16 agg_size, u16 timeout)
- {
- struct ieee80211_local *local = sdata->local;
- struct sk_buff *skb;
- struct ieee80211_mgmt *mgmt;
- u16 capab;
- skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
- if (!skb)
- return;
- skb_reserve(skb, local->hw.extra_tx_headroom);
- mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
- memset(mgmt, 0, 24);
- memcpy(mgmt->da, da, ETH_ALEN);
- memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
- if (sdata->vif.type == NL80211_IFTYPE_AP ||
- sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
- memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
- else if (sdata->vif.type == NL80211_IFTYPE_STATION)
- memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
- else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
- memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
- mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
- IEEE80211_STYPE_ACTION);
- skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_req));
- mgmt->u.action.category = WLAN_CATEGORY_BACK;
- mgmt->u.action.u.addba_req.action_code = WLAN_ACTION_ADDBA_REQ;
- mgmt->u.action.u.addba_req.dialog_token = dialog_token;
- capab = (u16)(1 << 1); /* bit 1 aggregation policy */
- capab |= (u16)(tid << 2); /* bit 5:2 TID number */
- capab |= (u16)(agg_size << 6); /* bit 15:6 max size of aggergation */
- mgmt->u.action.u.addba_req.capab = cpu_to_le16(capab);
- mgmt->u.action.u.addba_req.timeout = cpu_to_le16(timeout);
- mgmt->u.action.u.addba_req.start_seq_num =
- cpu_to_le16(start_seq_num << 4);
- ieee80211_tx_skb(sdata, skb);
- }
- void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn)
- {
- struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
- struct ieee80211_local *local = sdata->local;
- struct sk_buff *skb;
- struct ieee80211_bar *bar;
- u16 bar_control = 0;
- skb = dev_alloc_skb(sizeof(*bar) + local->hw.extra_tx_headroom);
- if (!skb)
- return;
- skb_reserve(skb, local->hw.extra_tx_headroom);
- bar = (struct ieee80211_bar *)skb_put(skb, sizeof(*bar));
- memset(bar, 0, sizeof(*bar));
- bar->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL |
- IEEE80211_STYPE_BACK_REQ);
- memcpy(bar->ra, ra, ETH_ALEN);
- memcpy(bar->ta, sdata->vif.addr, ETH_ALEN);
- bar_control |= (u16)IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL;
- bar_control |= (u16)IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA;
- bar_control |= (u16)(tid << IEEE80211_BAR_CTRL_TID_INFO_SHIFT);
- bar->control = cpu_to_le16(bar_control);
- bar->start_seq_num = cpu_to_le16(ssn);
- IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
- IEEE80211_TX_CTL_REQ_TX_STATUS;
- ieee80211_tx_skb_tid(sdata, skb, tid);
- }
- EXPORT_SYMBOL(ieee80211_send_bar);
- void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
- struct tid_ampdu_tx *tid_tx)
- {
- lockdep_assert_held(&sta->ampdu_mlme.mtx);
- lockdep_assert_held(&sta->lock);
- rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
- }
- /*
- * When multiple aggregation sessions on multiple stations
- * are being created/destroyed simultaneously, we need to
- * refcount the global queue stop caused by that in order
- * to not get into a situation where one of the aggregation
- * setup or teardown re-enables queues before the other is
- * ready to handle that.
- *
- * These two functions take care of this issue by keeping
- * a global "agg_queue_stop" refcount.
- */
- static void __acquires(agg_queue)
- ieee80211_stop_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
- {
- int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
- /* we do refcounting here, so don't use the queue reason refcounting */
- if (atomic_inc_return(&sdata->local->agg_queue_stop[queue]) == 1)
- ieee80211_stop_queue_by_reason(
- &sdata->local->hw, queue,
- IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
- false);
- __acquire(agg_queue);
- }
- static void __releases(agg_queue)
- ieee80211_wake_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
- {
- int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
- if (atomic_dec_return(&sdata->local->agg_queue_stop[queue]) == 0)
- ieee80211_wake_queue_by_reason(
- &sdata->local->hw, queue,
- IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
- false);
- __release(agg_queue);
- }
- static void
- ieee80211_agg_stop_txq(struct sta_info *sta, int tid)
- {
- struct ieee80211_txq *txq = sta->sta.txq[tid];
- struct txq_info *txqi;
- if (!txq)
- return;
- txqi = to_txq_info(txq);
- /* Lock here to protect against further seqno updates on dequeue */
- spin_lock_bh(&txqi->queue.lock);
- set_bit(IEEE80211_TXQ_STOP, &txqi->flags);
- spin_unlock_bh(&txqi->queue.lock);
- }
- static void
- ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable)
- {
- struct ieee80211_txq *txq = sta->sta.txq[tid];
- struct txq_info *txqi;
- if (!txq)
- return;
- txqi = to_txq_info(txq);
- if (enable)
- set_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
- else
- clear_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
- clear_bit(IEEE80211_TXQ_STOP, &txqi->flags);
- drv_wake_tx_queue(sta->sdata->local, txqi);
- }
- /*
- * splice packets from the STA's pending to the local pending,
- * requires a call to ieee80211_agg_splice_finish later
- */
- static void __acquires(agg_queue)
- ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata,
- struct tid_ampdu_tx *tid_tx, u16 tid)
- {
- struct ieee80211_local *local = sdata->local;
- int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
- unsigned long flags;
- ieee80211_stop_queue_agg(sdata, tid);
- if (WARN(!tid_tx,
- "TID %d gone but expected when splicing aggregates from the pending queue\n",
- tid))
- return;
- if (!skb_queue_empty(&tid_tx->pending)) {
- spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
- /* copy over remaining packets */
- skb_queue_splice_tail_init(&tid_tx->pending,
- &local->pending[queue]);
- spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
- }
- }
- static void __releases(agg_queue)
- ieee80211_agg_splice_finish(struct ieee80211_sub_if_data *sdata, u16 tid)
- {
- ieee80211_wake_queue_agg(sdata, tid);
- }
- static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid)
- {
- struct tid_ampdu_tx *tid_tx;
- lockdep_assert_held(&sta->ampdu_mlme.mtx);
- lockdep_assert_held(&sta->lock);
- tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
- /*
- * When we get here, the TX path will not be lockless any more wrt.
- * aggregation, since the OPERATIONAL bit has long been cleared.
- * Thus it will block on getting the lock, if it occurs. So if we
- * stop the queue now, we will not get any more packets, and any
- * that might be being processed will wait for us here, thereby
- * guaranteeing that no packets go to the tid_tx pending queue any
- * more.
- */
- ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
- /* future packets must not find the tid_tx struct any more */
- ieee80211_assign_tid_tx(sta, tid, NULL);
- ieee80211_agg_splice_finish(sta->sdata, tid);
- ieee80211_agg_start_txq(sta, tid, false);
- kfree_rcu(tid_tx, rcu_head);
- }
- int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
- enum ieee80211_agg_stop_reason reason)
- {
- struct ieee80211_local *local = sta->local;
- struct tid_ampdu_tx *tid_tx;
- enum ieee80211_ampdu_mlme_action action;
- int ret;
- lockdep_assert_held(&sta->ampdu_mlme.mtx);
- switch (reason) {
- case AGG_STOP_DECLINED:
- case AGG_STOP_LOCAL_REQUEST:
- case AGG_STOP_PEER_REQUEST:
- action = IEEE80211_AMPDU_TX_STOP_CONT;
- break;
- case AGG_STOP_DESTROY_STA:
- action = IEEE80211_AMPDU_TX_STOP_FLUSH;
- break;
- default:
- WARN_ON_ONCE(1);
- return -EINVAL;
- }
- spin_lock_bh(&sta->lock);
- tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
- if (!tid_tx) {
- spin_unlock_bh(&sta->lock);
- return -ENOENT;
- }
- /*
- * if we're already stopping ignore any new requests to stop
- * unless we're destroying it in which case notify the driver
- */
- if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
- spin_unlock_bh(&sta->lock);
- if (reason != AGG_STOP_DESTROY_STA)
- return -EALREADY;
- ret = drv_ampdu_action(local, sta->sdata,
- IEEE80211_AMPDU_TX_STOP_FLUSH_CONT,
- &sta->sta, tid, NULL, 0);
- WARN_ON_ONCE(ret);
- return 0;
- }
- if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
- /* not even started yet! */
- ieee80211_assign_tid_tx(sta, tid, NULL);
- spin_unlock_bh(&sta->lock);
- kfree_rcu(tid_tx, rcu_head);
- return 0;
- }
- set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
- spin_unlock_bh(&sta->lock);
- ht_dbg(sta->sdata, "Tx BA session stop requested for %pM tid %u\n",
- sta->sta.addr, tid);
- del_timer_sync(&tid_tx->addba_resp_timer);
- del_timer_sync(&tid_tx->session_timer);
- /*
- * After this packets are no longer handed right through
- * to the driver but are put onto tid_tx->pending instead,
- * with locking to ensure proper access.
- */
- clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
- /*
- * There might be a few packets being processed right now (on
- * another CPU) that have already gotten past the aggregation
- * check when it was still OPERATIONAL and consequently have
- * IEEE80211_TX_CTL_AMPDU set. In that case, this code might
- * call into the driver at the same time or even before the
- * TX paths calls into it, which could confuse the driver.
- *
- * Wait for all currently running TX paths to finish before
- * telling the driver. New packets will not go through since
- * the aggregation session is no longer OPERATIONAL.
- */
- synchronize_net();
- tid_tx->stop_initiator = reason == AGG_STOP_PEER_REQUEST ?
- WLAN_BACK_RECIPIENT :
- WLAN_BACK_INITIATOR;
- tid_tx->tx_stop = reason == AGG_STOP_LOCAL_REQUEST;
- ret = drv_ampdu_action(local, sta->sdata, action,
- &sta->sta, tid, NULL, 0);
- /* HW shall not deny going back to legacy */
- if (WARN_ON(ret)) {
- /*
- * We may have pending packets get stuck in this case...
- * Not bothering with a workaround for now.
- */
- }
- /*
- * In the case of AGG_STOP_DESTROY_STA, the driver won't
- * necessarily call ieee80211_stop_tx_ba_cb(), so this may
- * seem like we can leave the tid_tx data pending forever.
- * This is true, in a way, but "forever" is only until the
- * station struct is actually destroyed. In the meantime,
- * leaving it around ensures that we don't transmit packets
- * to the driver on this TID which might confuse it.
- */
- return 0;
- }
- /*
- * After sending add Block Ack request we activated a timer until
- * add Block Ack response will arrive from the recipient.
- * If this timer expires sta_addba_resp_timer_expired will be executed.
- */
- static void sta_addba_resp_timer_expired(unsigned long data)
- {
- /* not an elegant detour, but there is no choice as the timer passes
- * only one argument, and both sta_info and TID are needed, so init
- * flow in sta_info_create gives the TID as data, while the timer_to_id
- * array gives the sta through container_of */
- u16 tid = *(u8 *)data;
- struct sta_info *sta = container_of((void *)data,
- struct sta_info, timer_to_tid[tid]);
- struct tid_ampdu_tx *tid_tx;
- /* check if the TID waits for addBA response */
- rcu_read_lock();
- tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
- if (!tid_tx ||
- test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) {
- rcu_read_unlock();
- ht_dbg(sta->sdata,
- "timer expired on %pM tid %d but we are not (or no longer) expecting addBA response there\n",
- sta->sta.addr, tid);
- return;
- }
- ht_dbg(sta->sdata, "addBA response timer expired on %pM tid %d\n",
- sta->sta.addr, tid);
- ieee80211_stop_tx_ba_session(&sta->sta, tid);
- rcu_read_unlock();
- }
- void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
- {
- struct tid_ampdu_tx *tid_tx;
- struct ieee80211_local *local = sta->local;
- struct ieee80211_sub_if_data *sdata = sta->sdata;
- u16 start_seq_num;
- int ret;
- tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
- /*
- * Start queuing up packets for this aggregation session.
- * We're going to release them once the driver is OK with
- * that.
- */
- clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
- ieee80211_agg_stop_txq(sta, tid);
- /*
- * Make sure no packets are being processed. This ensures that
- * we have a valid starting sequence number and that in-flight
- * packets have been flushed out and no packets for this TID
- * will go into the driver during the ampdu_action call.
- */
- synchronize_net();
- start_seq_num = sta->tid_seq[tid] >> 4;
- ret = drv_ampdu_action(local, sdata, IEEE80211_AMPDU_TX_START,
- &sta->sta, tid, &start_seq_num, 0);
- if (ret) {
- ht_dbg(sdata,
- "BA request denied - HW unavailable for %pM tid %d\n",
- sta->sta.addr, tid);
- spin_lock_bh(&sta->lock);
- ieee80211_agg_splice_packets(sdata, tid_tx, tid);
- ieee80211_assign_tid_tx(sta, tid, NULL);
- ieee80211_agg_splice_finish(sdata, tid);
- spin_unlock_bh(&sta->lock);
- ieee80211_agg_start_txq(sta, tid, false);
- kfree_rcu(tid_tx, rcu_head);
- return;
- }
- /* activate the timer for the recipient's addBA response */
- mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
- ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
- sta->sta.addr, tid);
- spin_lock_bh(&sta->lock);
- sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
- sta->ampdu_mlme.addba_req_num[tid]++;
- spin_unlock_bh(&sta->lock);
- /* send AddBA request */
- ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
- tid_tx->dialog_token, start_seq_num,
- local->hw.max_tx_aggregation_subframes,
- tid_tx->timeout);
- }
- /*
- * After accepting the AddBA Response we activated a timer,
- * resetting it after each frame that we send.
- */
- static void sta_tx_agg_session_timer_expired(unsigned long data)
- {
- /* not an elegant detour, but there is no choice as the timer passes
- * only one argument, and various sta_info are needed here, so init
- * flow in sta_info_create gives the TID as data, while the timer_to_id
- * array gives the sta through container_of */
- u8 *ptid = (u8 *)data;
- u8 *timer_to_id = ptid - *ptid;
- struct sta_info *sta = container_of(timer_to_id, struct sta_info,
- timer_to_tid[0]);
- struct tid_ampdu_tx *tid_tx;
- unsigned long timeout;
- rcu_read_lock();
- tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[*ptid]);
- if (!tid_tx || test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
- rcu_read_unlock();
- return;
- }
- timeout = tid_tx->last_tx + TU_TO_JIFFIES(tid_tx->timeout);
- if (time_is_after_jiffies(timeout)) {
- mod_timer(&tid_tx->session_timer, timeout);
- rcu_read_unlock();
- return;
- }
- rcu_read_unlock();
- ht_dbg(sta->sdata, "tx session timer expired on %pM tid %d\n",
- sta->sta.addr, (u16)*ptid);
- ieee80211_stop_tx_ba_session(&sta->sta, *ptid);
- }
- int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
- u16 timeout)
- {
- struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
- struct ieee80211_sub_if_data *sdata = sta->sdata;
- struct ieee80211_local *local = sdata->local;
- struct tid_ampdu_tx *tid_tx;
- int ret = 0;
- trace_api_start_tx_ba_session(pubsta, tid);
- if (WARN(sta->reserved_tid == tid,
- "Requested to start BA session on reserved tid=%d", tid))
- return -EINVAL;
- if (!pubsta->ht_cap.ht_supported)
- return -EINVAL;
- if (WARN_ON_ONCE(!local->ops->ampdu_action))
- return -EINVAL;
- if ((tid >= IEEE80211_NUM_TIDS) ||
- !ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION) ||
- ieee80211_hw_check(&local->hw, TX_AMPDU_SETUP_IN_HW))
- return -EINVAL;
- ht_dbg(sdata, "Open BA session requested for %pM tid %u\n",
- pubsta->addr, tid);
- if (sdata->vif.type != NL80211_IFTYPE_STATION &&
- sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
- sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
- sdata->vif.type != NL80211_IFTYPE_AP &&
- sdata->vif.type != NL80211_IFTYPE_ADHOC)
- return -EINVAL;
- if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
- ht_dbg(sdata,
- "BA sessions blocked - Denying BA session request %pM tid %d\n",
- sta->sta.addr, tid);
- return -EINVAL;
- }
- /*
- * 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a
- * member of an IBSS, and has no other existing Block Ack agreement
- * with the recipient STA, then the initiating STA shall transmit a
- * Probe Request frame to the recipient STA and shall not transmit an
- * ADDBA Request frame unless it receives a Probe Response frame
- * from the recipient within dot11ADDBAFailureTimeout.
- *
- * The probe request mechanism for ADDBA is currently not implemented,
- * but we only build up Block Ack session with HT STAs. This information
- * is set when we receive a bss info from a probe response or a beacon.
- */
- if (sta->sdata->vif.type == NL80211_IFTYPE_ADHOC &&
- !sta->sta.ht_cap.ht_supported) {
- ht_dbg(sdata,
- "BA request denied - IBSS STA %pM does not advertise HT support\n",
- pubsta->addr);
- return -EINVAL;
- }
- spin_lock_bh(&sta->lock);
- /* we have tried too many times, receiver does not want A-MPDU */
- if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) {
- ret = -EBUSY;
- goto err_unlock_sta;
- }
- /*
- * if we have tried more than HT_AGG_BURST_RETRIES times we
- * will spread our requests in time to avoid stalling connection
- * for too long
- */
- if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_BURST_RETRIES &&
- time_before(jiffies, sta->ampdu_mlme.last_addba_req_time[tid] +
- HT_AGG_RETRIES_PERIOD)) {
- ht_dbg(sdata,
- "BA request denied - waiting a grace period after %d failed requests on %pM tid %u\n",
- sta->ampdu_mlme.addba_req_num[tid], sta->sta.addr, tid);
- ret = -EBUSY;
- goto err_unlock_sta;
- }
- tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
- /* check if the TID is not in aggregation flow already */
- if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) {
- ht_dbg(sdata,
- "BA request denied - session is not idle on %pM tid %u\n",
- sta->sta.addr, tid);
- ret = -EAGAIN;
- goto err_unlock_sta;
- }
- /* prepare A-MPDU MLME for Tx aggregation */
- tid_tx = kzalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
- if (!tid_tx) {
- ret = -ENOMEM;
- goto err_unlock_sta;
- }
- skb_queue_head_init(&tid_tx->pending);
- __set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
- tid_tx->timeout = timeout;
- /* response timer */
- tid_tx->addba_resp_timer.function = sta_addba_resp_timer_expired;
- tid_tx->addba_resp_timer.data = (unsigned long)&sta->timer_to_tid[tid];
- init_timer(&tid_tx->addba_resp_timer);
- /* tx timer */
- tid_tx->session_timer.function = sta_tx_agg_session_timer_expired;
- tid_tx->session_timer.data = (unsigned long)&sta->timer_to_tid[tid];
- init_timer_deferrable(&tid_tx->session_timer);
- /* assign a dialog token */
- sta->ampdu_mlme.dialog_token_allocator++;
- tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator;
- /*
- * Finally, assign it to the start array; the work item will
- * collect it and move it to the normal array.
- */
- sta->ampdu_mlme.tid_start_tx[tid] = tid_tx;
- ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
- /* this flow continues off the work */
- err_unlock_sta:
- spin_unlock_bh(&sta->lock);
- return ret;
- }
- EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
- static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
- struct sta_info *sta, u16 tid)
- {
- struct tid_ampdu_tx *tid_tx;
- lockdep_assert_held(&sta->ampdu_mlme.mtx);
- tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
- ht_dbg(sta->sdata, "Aggregation is on for %pM tid %d\n",
- sta->sta.addr, tid);
- drv_ampdu_action(local, sta->sdata,
- IEEE80211_AMPDU_TX_OPERATIONAL,
- &sta->sta, tid, NULL, tid_tx->buf_size);
- /*
- * synchronize with TX path, while splicing the TX path
- * should block so it won't put more packets onto pending.
- */
- spin_lock_bh(&sta->lock);
- ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
- /*
- * Now mark as operational. This will be visible
- * in the TX path, and lets it go lock-free in
- * the common case.
- */
- set_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
- ieee80211_agg_splice_finish(sta->sdata, tid);
- spin_unlock_bh(&sta->lock);
- ieee80211_agg_start_txq(sta, tid, true);
- }
- void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
- {
- struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
- struct ieee80211_local *local = sdata->local;
- struct sta_info *sta;
- struct tid_ampdu_tx *tid_tx;
- trace_api_start_tx_ba_cb(sdata, ra, tid);
- if (tid >= IEEE80211_NUM_TIDS) {
- ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n",
- tid, IEEE80211_NUM_TIDS);
- return;
- }
- mutex_lock(&local->sta_mtx);
- sta = sta_info_get_bss(sdata, ra);
- if (!sta) {
- mutex_unlock(&local->sta_mtx);
- ht_dbg(sdata, "Could not find station: %pM\n", ra);
- return;
- }
- mutex_lock(&sta->ampdu_mlme.mtx);
- tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
- if (WARN_ON(!tid_tx)) {
- ht_dbg(sdata, "addBA was not requested!\n");
- goto unlock;
- }
- if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)))
- goto unlock;
- if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state))
- ieee80211_agg_tx_operational(local, sta, tid);
- unlock:
- mutex_unlock(&sta->ampdu_mlme.mtx);
- mutex_unlock(&local->sta_mtx);
- }
- void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
- const u8 *ra, u16 tid)
- {
- struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_ra_tid *ra_tid;
- struct sk_buff *skb = dev_alloc_skb(0);
- if (unlikely(!skb))
- return;
- ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
- memcpy(&ra_tid->ra, ra, ETH_ALEN);
- ra_tid->tid = tid;
- skb->pkt_type = IEEE80211_SDATA_QUEUE_AGG_START;
- skb_queue_tail(&sdata->skb_queue, skb);
- ieee80211_queue_work(&local->hw, &sdata->work);
- }
- EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
- int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
- enum ieee80211_agg_stop_reason reason)
- {
- int ret;
- mutex_lock(&sta->ampdu_mlme.mtx);
- ret = ___ieee80211_stop_tx_ba_session(sta, tid, reason);
- mutex_unlock(&sta->ampdu_mlme.mtx);
- return ret;
- }
- int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
- {
- struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
- struct ieee80211_sub_if_data *sdata = sta->sdata;
- struct ieee80211_local *local = sdata->local;
- struct tid_ampdu_tx *tid_tx;
- int ret = 0;
- trace_api_stop_tx_ba_session(pubsta, tid);
- if (!local->ops->ampdu_action)
- return -EINVAL;
- if (tid >= IEEE80211_NUM_TIDS)
- return -EINVAL;
- spin_lock_bh(&sta->lock);
- tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
- if (!tid_tx) {
- ret = -ENOENT;
- goto unlock;
- }
- WARN(sta->reserved_tid == tid,
- "Requested to stop BA session on reserved tid=%d", tid);
- if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
- /* already in progress stopping it */
- ret = 0;
- goto unlock;
- }
- set_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state);
- ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
- unlock:
- spin_unlock_bh(&sta->lock);
- return ret;
- }
- EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
- void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid)
- {
- struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
- struct ieee80211_local *local = sdata->local;
- struct sta_info *sta;
- struct tid_ampdu_tx *tid_tx;
- bool send_delba = false;
- trace_api_stop_tx_ba_cb(sdata, ra, tid);
- if (tid >= IEEE80211_NUM_TIDS) {
- ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n",
- tid, IEEE80211_NUM_TIDS);
- return;
- }
- ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n", ra, tid);
- mutex_lock(&local->sta_mtx);
- sta = sta_info_get_bss(sdata, ra);
- if (!sta) {
- ht_dbg(sdata, "Could not find station: %pM\n", ra);
- goto unlock;
- }
- mutex_lock(&sta->ampdu_mlme.mtx);
- spin_lock_bh(&sta->lock);
- tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
- if (!tid_tx || !test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
- ht_dbg(sdata,
- "unexpected callback to A-MPDU stop for %pM tid %d\n",
- sta->sta.addr, tid);
- goto unlock_sta;
- }
- if (tid_tx->stop_initiator == WLAN_BACK_INITIATOR && tid_tx->tx_stop)
- send_delba = true;
- ieee80211_remove_tid_tx(sta, tid);
- unlock_sta:
- spin_unlock_bh(&sta->lock);
- if (send_delba)
- ieee80211_send_delba(sdata, ra, tid,
- WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
- mutex_unlock(&sta->ampdu_mlme.mtx);
- unlock:
- mutex_unlock(&local->sta_mtx);
- }
- void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
- const u8 *ra, u16 tid)
- {
- struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
- struct ieee80211_local *local = sdata->local;
- struct ieee80211_ra_tid *ra_tid;
- struct sk_buff *skb = dev_alloc_skb(0);
- if (unlikely(!skb))
- return;
- ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
- memcpy(&ra_tid->ra, ra, ETH_ALEN);
- ra_tid->tid = tid;
- skb->pkt_type = IEEE80211_SDATA_QUEUE_AGG_STOP;
- skb_queue_tail(&sdata->skb_queue, skb);
- ieee80211_queue_work(&local->hw, &sdata->work);
- }
- EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe);
- void ieee80211_process_addba_resp(struct ieee80211_local *local,
- struct sta_info *sta,
- struct ieee80211_mgmt *mgmt,
- size_t len)
- {
- struct tid_ampdu_tx *tid_tx;
- u16 capab, tid;
- u8 buf_size;
- capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
- tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
- buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
- mutex_lock(&sta->ampdu_mlme.mtx);
- tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
- if (!tid_tx)
- goto out;
- if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) {
- ht_dbg(sta->sdata, "wrong addBA response token, %pM tid %d\n",
- sta->sta.addr, tid);
- goto out;
- }
- del_timer_sync(&tid_tx->addba_resp_timer);
- ht_dbg(sta->sdata, "switched off addBA timer for %pM tid %d\n",
- sta->sta.addr, tid);
- /*
- * addba_resp_timer may have fired before we got here, and
- * caused WANT_STOP to be set. If the stop then was already
- * processed further, STOPPING might be set.
- */
- if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) ||
- test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
- ht_dbg(sta->sdata,
- "got addBA resp for %pM tid %d but we already gave up\n",
- sta->sta.addr, tid);
- goto out;
- }
- /*
- * IEEE 802.11-2007 7.3.1.14:
- * In an ADDBA Response frame, when the Status Code field
- * is set to 0, the Buffer Size subfield is set to a value
- * of at least 1.
- */
- if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
- == WLAN_STATUS_SUCCESS && buf_size) {
- if (test_and_set_bit(HT_AGG_STATE_RESPONSE_RECEIVED,
- &tid_tx->state)) {
- /* ignore duplicate response */
- goto out;
- }
- tid_tx->buf_size = buf_size;
- if (test_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state))
- ieee80211_agg_tx_operational(local, sta, tid);
- sta->ampdu_mlme.addba_req_num[tid] = 0;
- if (tid_tx->timeout) {
- mod_timer(&tid_tx->session_timer,
- TU_TO_EXP_TIME(tid_tx->timeout));
- tid_tx->last_tx = jiffies;
- }
- } else {
- ___ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_DECLINED);
- }
- out:
- mutex_unlock(&sta->ampdu_mlme.mtx);
- }
|