123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409 |
- /*
- * Freescale STMP37XX/STMP378X Real Time Clock driver
- *
- * Copyright (c) 2007 Sigmatel, Inc.
- * Peter Hartley, <peter.hartley@sigmatel.com>
- *
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- * Copyright 2011 Wolfram Sang, Pengutronix e.K.
- */
- /*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/io.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/interrupt.h>
- #include <linux/delay.h>
- #include <linux/rtc.h>
- #include <linux/slab.h>
- #include <linux/of_device.h>
- #include <linux/of.h>
- #include <linux/stmp_device.h>
- #include <linux/stmp3xxx_rtc_wdt.h>
- #define STMP3XXX_RTC_CTRL 0x0
- #define STMP3XXX_RTC_CTRL_SET 0x4
- #define STMP3XXX_RTC_CTRL_CLR 0x8
- #define STMP3XXX_RTC_CTRL_ALARM_IRQ_EN 0x00000001
- #define STMP3XXX_RTC_CTRL_ONEMSEC_IRQ_EN 0x00000002
- #define STMP3XXX_RTC_CTRL_ALARM_IRQ 0x00000004
- #define STMP3XXX_RTC_CTRL_WATCHDOGEN 0x00000010
- #define STMP3XXX_RTC_STAT 0x10
- #define STMP3XXX_RTC_STAT_STALE_SHIFT 16
- #define STMP3XXX_RTC_STAT_RTC_PRESENT 0x80000000
- #define STMP3XXX_RTC_STAT_XTAL32000_PRESENT 0x10000000
- #define STMP3XXX_RTC_STAT_XTAL32768_PRESENT 0x08000000
- #define STMP3XXX_RTC_SECONDS 0x30
- #define STMP3XXX_RTC_ALARM 0x40
- #define STMP3XXX_RTC_WATCHDOG 0x50
- #define STMP3XXX_RTC_PERSISTENT0 0x60
- #define STMP3XXX_RTC_PERSISTENT0_SET 0x64
- #define STMP3XXX_RTC_PERSISTENT0_CLR 0x68
- #define STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE (1 << 0)
- #define STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN (1 << 1)
- #define STMP3XXX_RTC_PERSISTENT0_ALARM_EN (1 << 2)
- #define STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP (1 << 4)
- #define STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP (1 << 5)
- #define STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ (1 << 6)
- #define STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE (1 << 7)
- #define STMP3XXX_RTC_PERSISTENT1 0x70
- /* missing bitmask in headers */
- #define STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER 0x80000000
- struct stmp3xxx_rtc_data {
- struct rtc_device *rtc;
- void __iomem *io;
- int irq_alarm;
- };
- #if IS_ENABLED(CONFIG_STMP3XXX_RTC_WATCHDOG)
- /**
- * stmp3xxx_wdt_set_timeout - configure the watchdog inside the STMP3xxx RTC
- * @dev: the parent device of the watchdog (= the RTC)
- * @timeout: the desired value for the timeout register of the watchdog.
- * 0 disables the watchdog
- *
- * The watchdog needs one register and two bits which are in the RTC domain.
- * To handle the resource conflict, the RTC driver will create another
- * platform_device for the watchdog driver as a child of the RTC device.
- * The watchdog driver is passed the below accessor function via platform_data
- * to configure the watchdog. Locking is not needed because accessing SET/CLR
- * registers is atomic.
- */
- static void stmp3xxx_wdt_set_timeout(struct device *dev, u32 timeout)
- {
- struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
- if (timeout) {
- writel(timeout, rtc_data->io + STMP3XXX_RTC_WATCHDOG);
- writel(STMP3XXX_RTC_CTRL_WATCHDOGEN,
- rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_SET);
- writel(STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER,
- rtc_data->io + STMP3XXX_RTC_PERSISTENT1 + STMP_OFFSET_REG_SET);
- } else {
- writel(STMP3XXX_RTC_CTRL_WATCHDOGEN,
- rtc_data->io + STMP3XXX_RTC_CTRL + STMP_OFFSET_REG_CLR);
- writel(STMP3XXX_RTC_PERSISTENT1_FORCE_UPDATER,
- rtc_data->io + STMP3XXX_RTC_PERSISTENT1 + STMP_OFFSET_REG_CLR);
- }
- }
- static struct stmp3xxx_wdt_pdata wdt_pdata = {
- .wdt_set_timeout = stmp3xxx_wdt_set_timeout,
- };
- static void stmp3xxx_wdt_register(struct platform_device *rtc_pdev)
- {
- struct platform_device *wdt_pdev =
- platform_device_alloc("stmp3xxx_rtc_wdt", rtc_pdev->id);
- if (wdt_pdev) {
- wdt_pdev->dev.parent = &rtc_pdev->dev;
- wdt_pdev->dev.platform_data = &wdt_pdata;
- platform_device_add(wdt_pdev);
- }
- }
- #else
- static void stmp3xxx_wdt_register(struct platform_device *rtc_pdev)
- {
- }
- #endif /* CONFIG_STMP3XXX_RTC_WATCHDOG */
- static int stmp3xxx_wait_time(struct stmp3xxx_rtc_data *rtc_data)
- {
- int timeout = 5000; /* 3ms according to i.MX28 Ref Manual */
- /*
- * The i.MX28 Applications Processor Reference Manual, Rev. 1, 2010
- * states:
- * | The order in which registers are updated is
- * | Persistent 0, 1, 2, 3, 4, 5, Alarm, Seconds.
- * | (This list is in bitfield order, from LSB to MSB, as they would
- * | appear in the STALE_REGS and NEW_REGS bitfields of the HW_RTC_STAT
- * | register. For example, the Seconds register corresponds to
- * | STALE_REGS or NEW_REGS containing 0x80.)
- */
- do {
- if (!(readl(rtc_data->io + STMP3XXX_RTC_STAT) &
- (0x80 << STMP3XXX_RTC_STAT_STALE_SHIFT)))
- return 0;
- udelay(1);
- } while (--timeout > 0);
- return (readl(rtc_data->io + STMP3XXX_RTC_STAT) &
- (0x80 << STMP3XXX_RTC_STAT_STALE_SHIFT)) ? -ETIME : 0;
- }
- /* Time read/write */
- static int stmp3xxx_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
- {
- int ret;
- struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
- ret = stmp3xxx_wait_time(rtc_data);
- if (ret)
- return ret;
- rtc_time_to_tm(readl(rtc_data->io + STMP3XXX_RTC_SECONDS), rtc_tm);
- return 0;
- }
- static int stmp3xxx_rtc_set_mmss(struct device *dev, unsigned long t)
- {
- struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
- writel(t, rtc_data->io + STMP3XXX_RTC_SECONDS);
- return stmp3xxx_wait_time(rtc_data);
- }
- /* interrupt(s) handler */
- static irqreturn_t stmp3xxx_rtc_interrupt(int irq, void *dev_id)
- {
- struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev_id);
- u32 status = readl(rtc_data->io + STMP3XXX_RTC_CTRL);
- if (status & STMP3XXX_RTC_CTRL_ALARM_IRQ) {
- writel(STMP3XXX_RTC_CTRL_ALARM_IRQ,
- rtc_data->io + STMP3XXX_RTC_CTRL_CLR);
- rtc_update_irq(rtc_data->rtc, 1, RTC_AF | RTC_IRQF);
- return IRQ_HANDLED;
- }
- return IRQ_NONE;
- }
- static int stmp3xxx_alarm_irq_enable(struct device *dev, unsigned int enabled)
- {
- struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
- if (enabled) {
- writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
- STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN,
- rtc_data->io + STMP3XXX_RTC_PERSISTENT0_SET);
- writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
- rtc_data->io + STMP3XXX_RTC_CTRL_SET);
- } else {
- writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
- STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN,
- rtc_data->io + STMP3XXX_RTC_PERSISTENT0_CLR);
- writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
- rtc_data->io + STMP3XXX_RTC_CTRL_CLR);
- }
- return 0;
- }
- static int stmp3xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
- {
- struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
- rtc_time_to_tm(readl(rtc_data->io + STMP3XXX_RTC_ALARM), &alm->time);
- return 0;
- }
- static int stmp3xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
- {
- unsigned long t;
- struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
- rtc_tm_to_time(&alm->time, &t);
- writel(t, rtc_data->io + STMP3XXX_RTC_ALARM);
- stmp3xxx_alarm_irq_enable(dev, alm->enabled);
- return 0;
- }
- static struct rtc_class_ops stmp3xxx_rtc_ops = {
- .alarm_irq_enable =
- stmp3xxx_alarm_irq_enable,
- .read_time = stmp3xxx_rtc_gettime,
- .set_mmss = stmp3xxx_rtc_set_mmss,
- .read_alarm = stmp3xxx_rtc_read_alarm,
- .set_alarm = stmp3xxx_rtc_set_alarm,
- };
- static int stmp3xxx_rtc_remove(struct platform_device *pdev)
- {
- struct stmp3xxx_rtc_data *rtc_data = platform_get_drvdata(pdev);
- if (!rtc_data)
- return 0;
- writel(STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
- rtc_data->io + STMP3XXX_RTC_CTRL_CLR);
- return 0;
- }
- static int stmp3xxx_rtc_probe(struct platform_device *pdev)
- {
- struct stmp3xxx_rtc_data *rtc_data;
- struct resource *r;
- u32 rtc_stat;
- u32 pers0_set, pers0_clr;
- u32 crystalfreq = 0;
- int err;
- rtc_data = devm_kzalloc(&pdev->dev, sizeof(*rtc_data), GFP_KERNEL);
- if (!rtc_data)
- return -ENOMEM;
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r) {
- dev_err(&pdev->dev, "failed to get resource\n");
- return -ENXIO;
- }
- rtc_data->io = devm_ioremap(&pdev->dev, r->start, resource_size(r));
- if (!rtc_data->io) {
- dev_err(&pdev->dev, "ioremap failed\n");
- return -EIO;
- }
- rtc_data->irq_alarm = platform_get_irq(pdev, 0);
- rtc_stat = readl(rtc_data->io + STMP3XXX_RTC_STAT);
- if (!(rtc_stat & STMP3XXX_RTC_STAT_RTC_PRESENT)) {
- dev_err(&pdev->dev, "no device onboard\n");
- return -ENODEV;
- }
- platform_set_drvdata(pdev, rtc_data);
- err = stmp_reset_block(rtc_data->io);
- if (err) {
- dev_err(&pdev->dev, "stmp_reset_block failed: %d\n", err);
- return err;
- }
- /*
- * Obviously the rtc needs a clock input to be able to run.
- * This clock can be provided by an external 32k crystal. If that one is
- * missing XTAL must not be disabled in suspend which consumes a
- * lot of power. Normally the presence and exact frequency (supported
- * are 32000 Hz and 32768 Hz) is detectable from fuses, but as reality
- * proves these fuses are not blown correctly on all machines, so the
- * frequency can be overridden in the device tree.
- */
- if (rtc_stat & STMP3XXX_RTC_STAT_XTAL32000_PRESENT)
- crystalfreq = 32000;
- else if (rtc_stat & STMP3XXX_RTC_STAT_XTAL32768_PRESENT)
- crystalfreq = 32768;
- of_property_read_u32(pdev->dev.of_node, "stmp,crystal-freq",
- &crystalfreq);
- switch (crystalfreq) {
- case 32000:
- /* keep 32kHz crystal running in low-power mode */
- pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ |
- STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
- STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
- pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP;
- break;
- case 32768:
- /* keep 32.768kHz crystal running in low-power mode */
- pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
- STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
- pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP |
- STMP3XXX_RTC_PERSISTENT0_XTAL32_FREQ;
- break;
- default:
- dev_warn(&pdev->dev,
- "invalid crystal-freq specified in device-tree. Assuming no crystal\n");
- /* fall-through */
- case 0:
- /* keep XTAL on in low-power mode */
- pers0_set = STMP3XXX_RTC_PERSISTENT0_XTAL24MHZ_PWRUP;
- pers0_clr = STMP3XXX_RTC_PERSISTENT0_XTAL32KHZ_PWRUP |
- STMP3XXX_RTC_PERSISTENT0_CLOCKSOURCE;
- }
- writel(pers0_set, rtc_data->io + STMP3XXX_RTC_PERSISTENT0_SET);
- writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
- STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
- STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE | pers0_clr,
- rtc_data->io + STMP3XXX_RTC_PERSISTENT0_CLR);
- writel(STMP3XXX_RTC_CTRL_ONEMSEC_IRQ_EN |
- STMP3XXX_RTC_CTRL_ALARM_IRQ_EN,
- rtc_data->io + STMP3XXX_RTC_CTRL_CLR);
- rtc_data->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
- &stmp3xxx_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc_data->rtc))
- return PTR_ERR(rtc_data->rtc);
- err = devm_request_irq(&pdev->dev, rtc_data->irq_alarm,
- stmp3xxx_rtc_interrupt, 0, "RTC alarm", &pdev->dev);
- if (err) {
- dev_err(&pdev->dev, "Cannot claim IRQ%d\n",
- rtc_data->irq_alarm);
- return err;
- }
- stmp3xxx_wdt_register(pdev);
- return 0;
- }
- #ifdef CONFIG_PM_SLEEP
- static int stmp3xxx_rtc_suspend(struct device *dev)
- {
- return 0;
- }
- static int stmp3xxx_rtc_resume(struct device *dev)
- {
- struct stmp3xxx_rtc_data *rtc_data = dev_get_drvdata(dev);
- stmp_reset_block(rtc_data->io);
- writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
- STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
- STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
- rtc_data->io + STMP3XXX_RTC_PERSISTENT0_CLR);
- return 0;
- }
- #endif
- static SIMPLE_DEV_PM_OPS(stmp3xxx_rtc_pm_ops, stmp3xxx_rtc_suspend,
- stmp3xxx_rtc_resume);
- static const struct of_device_id rtc_dt_ids[] = {
- { .compatible = "fsl,stmp3xxx-rtc", },
- { /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, rtc_dt_ids);
- static struct platform_driver stmp3xxx_rtcdrv = {
- .probe = stmp3xxx_rtc_probe,
- .remove = stmp3xxx_rtc_remove,
- .driver = {
- .name = "stmp3xxx-rtc",
- .pm = &stmp3xxx_rtc_pm_ops,
- .of_match_table = rtc_dt_ids,
- },
- };
- module_platform_driver(stmp3xxx_rtcdrv);
- MODULE_DESCRIPTION("STMP3xxx RTC Driver");
- MODULE_AUTHOR("dmitry pervushin <dpervushin@embeddedalley.com> and "
- "Wolfram Sang <w.sang@pengutronix.de>");
- MODULE_LICENSE("GPL");
|