123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336 |
- /*
- * BCM2835 master mode driver
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
- #include <linux/clk.h>
- #include <linux/completion.h>
- #include <linux/err.h>
- #include <linux/i2c.h>
- #include <linux/interrupt.h>
- #include <linux/io.h>
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #define BCM2835_I2C_C 0x0
- #define BCM2835_I2C_S 0x4
- #define BCM2835_I2C_DLEN 0x8
- #define BCM2835_I2C_A 0xc
- #define BCM2835_I2C_FIFO 0x10
- #define BCM2835_I2C_DIV 0x14
- #define BCM2835_I2C_DEL 0x18
- #define BCM2835_I2C_CLKT 0x1c
- #define BCM2835_I2C_C_READ BIT(0)
- #define BCM2835_I2C_C_CLEAR BIT(4) /* bits 4 and 5 both clear */
- #define BCM2835_I2C_C_ST BIT(7)
- #define BCM2835_I2C_C_INTD BIT(8)
- #define BCM2835_I2C_C_INTT BIT(9)
- #define BCM2835_I2C_C_INTR BIT(10)
- #define BCM2835_I2C_C_I2CEN BIT(15)
- #define BCM2835_I2C_S_TA BIT(0)
- #define BCM2835_I2C_S_DONE BIT(1)
- #define BCM2835_I2C_S_TXW BIT(2)
- #define BCM2835_I2C_S_RXR BIT(3)
- #define BCM2835_I2C_S_TXD BIT(4)
- #define BCM2835_I2C_S_RXD BIT(5)
- #define BCM2835_I2C_S_TXE BIT(6)
- #define BCM2835_I2C_S_RXF BIT(7)
- #define BCM2835_I2C_S_ERR BIT(8)
- #define BCM2835_I2C_S_CLKT BIT(9)
- #define BCM2835_I2C_S_LEN BIT(10) /* Fake bit for SW error reporting */
- #define BCM2835_I2C_BITMSK_S 0x03FF
- #define BCM2835_I2C_CDIV_MIN 0x0002
- #define BCM2835_I2C_CDIV_MAX 0xFFFE
- #define BCM2835_I2C_TIMEOUT (msecs_to_jiffies(1000))
- struct bcm2835_i2c_dev {
- struct device *dev;
- void __iomem *regs;
- struct clk *clk;
- int irq;
- struct i2c_adapter adapter;
- struct completion completion;
- u32 msg_err;
- u8 *msg_buf;
- size_t msg_buf_remaining;
- };
- static inline void bcm2835_i2c_writel(struct bcm2835_i2c_dev *i2c_dev,
- u32 reg, u32 val)
- {
- writel(val, i2c_dev->regs + reg);
- }
- static inline u32 bcm2835_i2c_readl(struct bcm2835_i2c_dev *i2c_dev, u32 reg)
- {
- return readl(i2c_dev->regs + reg);
- }
- static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev)
- {
- u32 val;
- while (i2c_dev->msg_buf_remaining) {
- val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
- if (!(val & BCM2835_I2C_S_TXD))
- break;
- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_FIFO,
- *i2c_dev->msg_buf);
- i2c_dev->msg_buf++;
- i2c_dev->msg_buf_remaining--;
- }
- }
- static void bcm2835_drain_rxfifo(struct bcm2835_i2c_dev *i2c_dev)
- {
- u32 val;
- while (i2c_dev->msg_buf_remaining) {
- val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
- if (!(val & BCM2835_I2C_S_RXD))
- break;
- *i2c_dev->msg_buf = bcm2835_i2c_readl(i2c_dev,
- BCM2835_I2C_FIFO);
- i2c_dev->msg_buf++;
- i2c_dev->msg_buf_remaining--;
- }
- }
- static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data)
- {
- struct bcm2835_i2c_dev *i2c_dev = data;
- u32 val, err;
- val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
- val &= BCM2835_I2C_BITMSK_S;
- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, val);
- err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR);
- if (err) {
- i2c_dev->msg_err = err;
- complete(&i2c_dev->completion);
- return IRQ_HANDLED;
- }
- if (val & BCM2835_I2C_S_RXD) {
- bcm2835_drain_rxfifo(i2c_dev);
- if (!(val & BCM2835_I2C_S_DONE))
- return IRQ_HANDLED;
- }
- if (val & BCM2835_I2C_S_DONE) {
- if (i2c_dev->msg_buf_remaining)
- i2c_dev->msg_err = BCM2835_I2C_S_LEN;
- else
- i2c_dev->msg_err = 0;
- complete(&i2c_dev->completion);
- return IRQ_HANDLED;
- }
- if (val & BCM2835_I2C_S_TXD) {
- bcm2835_fill_txfifo(i2c_dev);
- return IRQ_HANDLED;
- }
- return IRQ_NONE;
- }
- static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev,
- struct i2c_msg *msg)
- {
- u32 c;
- unsigned long time_left;
- i2c_dev->msg_buf = msg->buf;
- i2c_dev->msg_buf_remaining = msg->len;
- reinit_completion(&i2c_dev->completion);
- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR);
- if (msg->flags & I2C_M_RD) {
- c = BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR;
- } else {
- c = BCM2835_I2C_C_INTT;
- bcm2835_fill_txfifo(i2c_dev);
- }
- c |= BCM2835_I2C_C_ST | BCM2835_I2C_C_INTD | BCM2835_I2C_C_I2CEN;
- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr);
- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len);
- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c);
- time_left = wait_for_completion_timeout(&i2c_dev->completion,
- BCM2835_I2C_TIMEOUT);
- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR);
- if (!time_left) {
- dev_err(i2c_dev->dev, "i2c transfer timed out\n");
- return -ETIMEDOUT;
- }
- if (likely(!i2c_dev->msg_err))
- return 0;
- if ((i2c_dev->msg_err & BCM2835_I2C_S_ERR) &&
- (msg->flags & I2C_M_IGNORE_NAK))
- return 0;
- dev_err(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err);
- if (i2c_dev->msg_err & BCM2835_I2C_S_ERR)
- return -EREMOTEIO;
- else
- return -EIO;
- }
- static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
- int num)
- {
- struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
- int i;
- int ret = 0;
- for (i = 0; i < num; i++) {
- ret = bcm2835_i2c_xfer_msg(i2c_dev, &msgs[i]);
- if (ret)
- break;
- }
- return ret ?: i;
- }
- static u32 bcm2835_i2c_func(struct i2c_adapter *adap)
- {
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
- }
- static const struct i2c_algorithm bcm2835_i2c_algo = {
- .master_xfer = bcm2835_i2c_xfer,
- .functionality = bcm2835_i2c_func,
- };
- static int bcm2835_i2c_probe(struct platform_device *pdev)
- {
- struct bcm2835_i2c_dev *i2c_dev;
- struct resource *mem, *irq;
- u32 bus_clk_rate, divider;
- int ret;
- struct i2c_adapter *adap;
- i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
- if (!i2c_dev)
- return -ENOMEM;
- platform_set_drvdata(pdev, i2c_dev);
- i2c_dev->dev = &pdev->dev;
- init_completion(&i2c_dev->completion);
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- i2c_dev->regs = devm_ioremap_resource(&pdev->dev, mem);
- if (IS_ERR(i2c_dev->regs))
- return PTR_ERR(i2c_dev->regs);
- i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(i2c_dev->clk)) {
- dev_err(&pdev->dev, "Could not get clock\n");
- return PTR_ERR(i2c_dev->clk);
- }
- ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
- &bus_clk_rate);
- if (ret < 0) {
- dev_warn(&pdev->dev,
- "Could not read clock-frequency property\n");
- bus_clk_rate = 100000;
- }
- divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), bus_clk_rate);
- /*
- * Per the datasheet, the register is always interpreted as an even
- * number, by rounding down. In other words, the LSB is ignored. So,
- * if the LSB is set, increment the divider to avoid any issue.
- */
- if (divider & 1)
- divider++;
- if ((divider < BCM2835_I2C_CDIV_MIN) ||
- (divider > BCM2835_I2C_CDIV_MAX)) {
- dev_err(&pdev->dev, "Invalid clock-frequency\n");
- return -ENODEV;
- }
- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider);
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq) {
- dev_err(&pdev->dev, "No IRQ resource\n");
- return -ENODEV;
- }
- i2c_dev->irq = irq->start;
- ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED,
- dev_name(&pdev->dev), i2c_dev);
- if (ret) {
- dev_err(&pdev->dev, "Could not request IRQ\n");
- return -ENODEV;
- }
- adap = &i2c_dev->adapter;
- i2c_set_adapdata(adap, i2c_dev);
- adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_DEPRECATED;
- strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name));
- adap->algo = &bcm2835_i2c_algo;
- adap->dev.parent = &pdev->dev;
- adap->dev.of_node = pdev->dev.of_node;
- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0);
- ret = i2c_add_adapter(adap);
- if (ret)
- free_irq(i2c_dev->irq, i2c_dev);
- return ret;
- }
- static int bcm2835_i2c_remove(struct platform_device *pdev)
- {
- struct bcm2835_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
- free_irq(i2c_dev->irq, i2c_dev);
- i2c_del_adapter(&i2c_dev->adapter);
- return 0;
- }
- static const struct of_device_id bcm2835_i2c_of_match[] = {
- { .compatible = "brcm,bcm2835-i2c" },
- {},
- };
- MODULE_DEVICE_TABLE(of, bcm2835_i2c_of_match);
- static struct platform_driver bcm2835_i2c_driver = {
- .probe = bcm2835_i2c_probe,
- .remove = bcm2835_i2c_remove,
- .driver = {
- .name = "i2c-bcm2835",
- .of_match_table = bcm2835_i2c_of_match,
- },
- };
- module_platform_driver(bcm2835_i2c_driver);
- MODULE_AUTHOR("Stephen Warren <swarren@wwwdotorg.org>");
- MODULE_DESCRIPTION("BCM2835 I2C bus adapter");
- MODULE_LICENSE("GPL v2");
- MODULE_ALIAS("platform:i2c-bcm2835");
|