123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192 |
- /*
- * Renesas Europe EDOSK7760 Board Support
- *
- * Copyright (C) 2008 SPES Societa' Progettazione Elettronica e Software Ltd.
- * Author: Luca Santini <luca.santini@spesonline.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
- #include <linux/init.h>
- #include <linux/types.h>
- #include <linux/platform_device.h>
- #include <linux/smc91x.h>
- #include <linux/interrupt.h>
- #include <linux/sh_intc.h>
- #include <linux/i2c.h>
- #include <linux/mtd/physmap.h>
- #include <asm/machvec.h>
- #include <asm/io.h>
- #include <asm/addrspace.h>
- #include <asm/delay.h>
- #include <asm/i2c-sh7760.h>
- #include <asm/sizes.h>
- /* Bus state controller registers for CS4 area */
- #define BSC_CS4BCR 0xA4FD0010
- #define BSC_CS4WCR 0xA4FD0030
- #define SMC_IOBASE 0xA2000000
- #define SMC_IO_OFFSET 0x300
- #define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET)
- /* NOR flash */
- static struct mtd_partition edosk7760_nor_flash_partitions[] = {
- {
- .name = "bootloader",
- .offset = 0,
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- }, {
- .name = "fs",
- .offset = MTDPART_OFS_APPEND,
- .size = (26 << 20),
- }, {
- .name = "other",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
- };
- static struct physmap_flash_data edosk7760_nor_flash_data = {
- .width = 4,
- .parts = edosk7760_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(edosk7760_nor_flash_partitions),
- };
- static struct resource edosk7760_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x00000000 + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
- }
- };
- static struct platform_device edosk7760_nor_flash_device = {
- .name = "physmap-flash",
- .resource = edosk7760_nor_flash_resources,
- .num_resources = ARRAY_SIZE(edosk7760_nor_flash_resources),
- .dev = {
- .platform_data = &edosk7760_nor_flash_data,
- },
- };
- /* i2c initialization functions */
- static struct sh7760_i2c_platdata i2c_pd = {
- .speed_khz = 400,
- };
- static struct resource sh7760_i2c1_res[] = {
- {
- .start = SH7760_I2C1_MMIO,
- .end = SH7760_I2C1_MMIOEND,
- .flags = IORESOURCE_MEM,
- },{
- .start = evt2irq(0x9e0),
- .end = evt2irq(0x9e0),
- .flags = IORESOURCE_IRQ,
- },
- };
- static struct platform_device sh7760_i2c1_dev = {
- .dev = {
- .platform_data = &i2c_pd,
- },
- .name = SH7760_I2C_DEVNAME,
- .id = 1,
- .resource = sh7760_i2c1_res,
- .num_resources = ARRAY_SIZE(sh7760_i2c1_res),
- };
- static struct resource sh7760_i2c0_res[] = {
- {
- .start = SH7760_I2C0_MMIO,
- .end = SH7760_I2C0_MMIOEND,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x9c0),
- .end = evt2irq(0x9c0),
- .flags = IORESOURCE_IRQ,
- },
- };
- static struct platform_device sh7760_i2c0_dev = {
- .dev = {
- .platform_data = &i2c_pd,
- },
- .name = SH7760_I2C_DEVNAME,
- .id = 0,
- .resource = sh7760_i2c0_res,
- .num_resources = ARRAY_SIZE(sh7760_i2c0_res),
- };
- /* eth initialization functions */
- static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
- };
- static struct resource smc91x_res[] = {
- [0] = {
- .start = SMC_IOADDR,
- .end = SMC_IOADDR + SZ_32 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x2a0),
- .end = evt2irq(0x2a0),
- .flags = IORESOURCE_IRQ ,
- }
- };
- static struct platform_device smc91x_dev = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc91x_res),
- .resource = smc91x_res,
- .dev = {
- .platform_data = &smc91x_info,
- },
- };
- /* platform init code */
- static struct platform_device *edosk7760_devices[] __initdata = {
- &smc91x_dev,
- &edosk7760_nor_flash_device,
- &sh7760_i2c0_dev,
- &sh7760_i2c1_dev,
- };
- static int __init init_edosk7760_devices(void)
- {
- plat_irq_setup_pins(IRQ_MODE_IRQ);
- return platform_add_devices(edosk7760_devices,
- ARRAY_SIZE(edosk7760_devices));
- }
- device_initcall(init_edosk7760_devices);
- /*
- * The Machine Vector
- */
- struct sh_machine_vector mv_edosk7760 __initmv = {
- .mv_name = "EDOSK7760",
- };
|