123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187 |
- #ifndef _ASM_IA64_HW_IRQ_H
- #define _ASM_IA64_HW_IRQ_H
- /*
- * Copyright (C) 2001-2003 Hewlett-Packard Co
- * David Mosberger-Tang <davidm@hpl.hp.com>
- */
- #include <linux/interrupt.h>
- #include <linux/sched.h>
- #include <linux/types.h>
- #include <linux/profile.h>
- #include <asm/machvec.h>
- #include <asm/ptrace.h>
- #include <asm/smp.h>
- typedef u8 ia64_vector;
- /*
- * 0 special
- *
- * 1,3-14 are reserved from firmware
- *
- * 16-255 (vectored external interrupts) are available
- *
- * 15 spurious interrupt (see IVR)
- *
- * 16 lowest priority, 255 highest priority
- *
- * 15 classes of 16 interrupts each.
- */
- #define IA64_MIN_VECTORED_IRQ 16
- #define IA64_MAX_VECTORED_IRQ 255
- #define IA64_NUM_VECTORS 256
- #define AUTO_ASSIGN -1
- #define IA64_SPURIOUS_INT_VECTOR 0x0f
- /*
- * Vectors 0x10-0x1f are used for low priority interrupts, e.g. CMCI.
- */
- #define IA64_CPEP_VECTOR 0x1c /* corrected platform error polling vector */
- #define IA64_CMCP_VECTOR 0x1d /* corrected machine-check polling vector */
- #define IA64_CPE_VECTOR 0x1e /* corrected platform error interrupt vector */
- #define IA64_CMC_VECTOR 0x1f /* corrected machine-check interrupt vector */
- /*
- * Vectors 0x20-0x2f are reserved for legacy ISA IRQs.
- * Use vectors 0x30-0xe7 as the default device vector range for ia64.
- * Platforms may choose to reduce this range in platform_irq_setup, but the
- * platform range must fall within
- * [IA64_DEF_FIRST_DEVICE_VECTOR..IA64_DEF_LAST_DEVICE_VECTOR]
- */
- extern int ia64_first_device_vector;
- extern int ia64_last_device_vector;
- #if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_DIG))
- /* Reserve the lower priority vector than device vectors for "move IRQ" IPI */
- #define IA64_IRQ_MOVE_VECTOR 0x30 /* "move IRQ" IPI */
- #define IA64_DEF_FIRST_DEVICE_VECTOR 0x31
- #else
- #define IA64_DEF_FIRST_DEVICE_VECTOR 0x30
- #endif
- #define IA64_DEF_LAST_DEVICE_VECTOR 0xe7
- #define IA64_FIRST_DEVICE_VECTOR ia64_first_device_vector
- #define IA64_LAST_DEVICE_VECTOR ia64_last_device_vector
- #define IA64_MAX_DEVICE_VECTORS (IA64_DEF_LAST_DEVICE_VECTOR - IA64_DEF_FIRST_DEVICE_VECTOR + 1)
- #define IA64_NUM_DEVICE_VECTORS (IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
- #define IA64_MCA_RENDEZ_VECTOR 0xe8 /* MCA rendez interrupt */
- #define IA64_PERFMON_VECTOR 0xee /* performance monitor interrupt vector */
- #define IA64_TIMER_VECTOR 0xef /* use highest-prio group 15 interrupt for timer */
- #define IA64_MCA_WAKEUP_VECTOR 0xf0 /* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
- #define IA64_IPI_LOCAL_TLB_FLUSH 0xfc /* SMP flush local TLB */
- #define IA64_IPI_RESCHEDULE 0xfd /* SMP reschedule */
- #define IA64_IPI_VECTOR 0xfe /* inter-processor interrupt vector */
- /* Used for encoding redirected irqs */
- #define IA64_IRQ_REDIRECTED (1 << 31)
- /* IA64 inter-cpu interrupt related definitions */
- #define IA64_IPI_DEFAULT_BASE_ADDR 0xfee00000
- /* Delivery modes for inter-cpu interrupts */
- enum {
- IA64_IPI_DM_INT = 0x0, /* pend an external interrupt */
- IA64_IPI_DM_PMI = 0x2, /* pend a PMI */
- IA64_IPI_DM_NMI = 0x4, /* pend an NMI (vector 2) */
- IA64_IPI_DM_INIT = 0x5, /* pend an INIT interrupt */
- IA64_IPI_DM_EXTINT = 0x7, /* pend an 8259-compatible interrupt. */
- };
- extern __u8 isa_irq_to_vector_map[16];
- #define isa_irq_to_vector(x) isa_irq_to_vector_map[(x)]
- struct irq_cfg {
- ia64_vector vector;
- cpumask_t domain;
- cpumask_t old_domain;
- unsigned move_cleanup_count;
- u8 move_in_progress : 1;
- };
- extern spinlock_t vector_lock;
- extern struct irq_cfg irq_cfg[NR_IRQS];
- #define irq_to_domain(x) irq_cfg[(x)].domain
- DECLARE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq);
- extern struct irq_chip irq_type_ia64_lsapic; /* CPU-internal interrupt controller */
- #define ia64_register_ipi ia64_native_register_ipi
- #define assign_irq_vector ia64_native_assign_irq_vector
- #define free_irq_vector ia64_native_free_irq_vector
- #define register_percpu_irq ia64_native_register_percpu_irq
- #define ia64_resend_irq ia64_native_resend_irq
- extern void ia64_native_register_ipi(void);
- extern int bind_irq_vector(int irq, int vector, cpumask_t domain);
- extern int ia64_native_assign_irq_vector (int irq); /* allocate a free vector */
- extern void ia64_native_free_irq_vector (int vector);
- extern int reserve_irq_vector (int vector);
- extern void __setup_vector_irq(int cpu);
- extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect);
- extern void ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action);
- extern void destroy_and_reserve_irq (unsigned int irq);
- #if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
- extern int irq_prepare_move(int irq, int cpu);
- extern void irq_complete_move(unsigned int irq);
- #else
- static inline int irq_prepare_move(int irq, int cpu) { return 0; }
- static inline void irq_complete_move(unsigned int irq) {}
- #endif
- static inline void ia64_native_resend_irq(unsigned int vector)
- {
- platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
- }
- /*
- * Default implementations for the irq-descriptor API:
- */
- #ifndef CONFIG_IA64_GENERIC
- static inline ia64_vector __ia64_irq_to_vector(int irq)
- {
- return irq_cfg[irq].vector;
- }
- static inline unsigned int
- __ia64_local_vector_to_irq (ia64_vector vec)
- {
- return __this_cpu_read(vector_irq[vec]);
- }
- #endif
- /*
- * Next follows the irq descriptor interface. On IA-64, each CPU supports 256 interrupt
- * vectors. On smaller systems, there is a one-to-one correspondence between interrupt
- * vectors and the Linux irq numbers. However, larger systems may have multiple interrupt
- * domains meaning that the translation from vector number to irq number depends on the
- * interrupt domain that a CPU belongs to. This API abstracts such platform-dependent
- * differences and provides a uniform means to translate between vector and irq numbers
- * and to obtain the irq descriptor for a given irq number.
- */
- /* Extract the IA-64 vector that corresponds to IRQ. */
- static inline ia64_vector
- irq_to_vector (int irq)
- {
- return platform_irq_to_vector(irq);
- }
- /*
- * Convert the local IA-64 vector to the corresponding irq number. This translation is
- * done in the context of the interrupt domain that the currently executing CPU belongs
- * to.
- */
- static inline unsigned int
- local_vector_to_irq (ia64_vector vec)
- {
- return platform_local_vector_to_irq(vec);
- }
- #endif /* _ASM_IA64_HW_IRQ_H */
|