| 12345678910111213141516171819202122232425262728293031323334 |
- The PSS cards and other ECHO based cards provide an onboard DSP with
- downloadable programs and also has an AD1848 "Microsoft Sound System"
- device. The PSS driver enables MSS and MPU401 modes of the card. SB
- is not enabled since it doesn't work concurrently with MSS.
- If you build this driver as a module then the driver takes the following
- parameters
- pss_io. The I/O base the PSS card is configured at (normally 0x220
- or 0x240)
- mss_io The base address of the Microsoft Sound System interface.
- This is normally 0x530, but may be 0x604 or other addresses.
- mss_irq The interrupt assigned to the Microsoft Sound System
- emulation. IRQ's 3,5,7,9,10,11 and 12 are available. If you
- get IRQ errors be sure to check the interrupt is set to
- "ISA/Legacy" in the BIOS on modern machines.
- mss_dma The DMA channel used by the Microsoft Sound System.
- This can be 0, 1, or 3. DMA 0 is not available on older
- machines and will cause a crash on them.
- mpu_io The MPU emulation base address. This sets the base of the
- synthesizer. It is typically 0x330 but can be altered.
- mpu_irq The interrupt to use for the synthesizer. It must differ
- from the IRQ used by the Microsoft Sound System port.
- The mpu_io/mpu_irq fields are optional. If they are not specified the
- synthesizer parts are not configured.
- /*(DEBLOBBED)*/
|
