12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273 |
- * Dialog DA9055 Power Management Integrated Circuit (PMIC)
- DA9055 consists of a large and varied group of sub-devices (I2C Only):
- Device Supply Names Description
- ------ ------------ -----------
- da9055-gpio : : GPIOs
- da9055-regulator : : Regulators
- da9055-onkey : : On key
- da9055-rtc : : RTC
- da9055-hwmon : : ADC
- da9055-watchdog : : Watchdog
- The CODEC device in DA9055 has a separate, configurable I2C address and so
- is instantiated separately from the PMIC.
- For details on accompanying CODEC I2C device, see the following:
- Documentation/devicetree/bindings/sound/da9055.txt
- ======
- Required properties:
- - compatible : Should be "dlg,da9055-pmic"
- - reg: Specifies the I2C slave address (defaults to 0x5a but can be modified)
- - interrupt-parent: Specifies the phandle of the interrupt controller to which
- the IRQs from da9055 are delivered to.
- - interrupts: IRQ line info for da9055 chip.
- - interrupt-controller: da9055 has internal IRQs (has own IRQ domain).
- - #interrupt-cells: Should be 1, is the local IRQ number for da9055.
- Sub-nodes:
- - regulators : Contain the regulator nodes. The DA9055 regulators are
- bound using their names as listed below:
- buck1 : regulator BUCK1
- buck2 : regulator BUCK2
- ldo1 : regulator LDO1
- ldo2 : regulator LDO2
- ldo3 : regulator LDO3
- ldo4 : regulator LDO4
- ldo5 : regulator LDO5
- ldo6 : regulator LDO6
- The bindings details of individual regulator device can be found in:
- Documentation/devicetree/bindings/regulator/regulator.txt
- Example:
- pmic: da9055-pmic@5a {
- compatible = "dlg,da9055-pmic";
- reg = <0x5a>;
- interrupt-parent = <&intc>;
- interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
- #interrupt-cells = <1>;
- regulators {
- buck1: BUCK1 {
- regulator-min-microvolt = <725000>;
- regulator-max-microvolt = <2075000>;
- };
- buck2: BUCK2 {
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <2500000>;
- };
- ldo1: LDO1 {
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <3300000>;
- };
- };
- };
|