| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061 |
- I2C for Atmel platforms
- Required properties :
- - compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c",
- "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c",
- "atmel,at91sam9x5-i2c" or "atmel,sama5d2-i2c"
- - reg: physical base address of the controller and length of memory mapped
- region.
- - interrupts: interrupt number to the cpu.
- - #address-cells = <1>;
- - #size-cells = <0>;
- - clocks: phandles to input clocks.
- Optional properties:
- - clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
- - dmas: A list of two dma specifiers, one for each entry in dma-names.
- - dma-names: should contain "tx" and "rx".
- - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
- capable I2C controllers.
- - Child nodes conforming to i2c bus binding
- Examples :
- i2c0: i2c@fff84000 {
- compatible = "atmel,at91sam9g20-i2c";
- reg = <0xfff84000 0x100>;
- interrupts = <12 4 6>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&twi0_clk>;
- clock-frequency = <400000>;
- 24c512@50 {
- compatible = "24c512";
- reg = <0x50>;
- pagesize = <128>;
- }
- }
- i2c0: i2c@f8034600 {
- compatible = "atmel,sama5d2-i2c";
- reg = <0xf8034600 0x100>;
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
- dmas = <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(11)>,
- <&dma0
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(12)>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&flx0>;
- atmel,fifo-size = <16>;
- wm8731: wm8731@1a {
- compatible = "wm8731";
- reg = <0x1a>;
- };
- };
|
