| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217221822192220222122222223222422252226222722282229223022312232223322342235223622372238223922402241224222432244224522462247224822492250225122522253225422552256225722582259226022612262226322642265226622672268226922702271227222732274227522762277227822792280228122822283228422852286228722882289229022912292229322942295229622972298229923002301230223032304230523062307230823092310231123122313231423152316231723182319232023212322232323242325232623272328232923302331233223332334233523362337233823392340234123422343234423452346234723482349235023512352235323542355235623572358235923602361236223632364236523662367236823692370237123722373237423752376237723782379238023812382238323842385238623872388238923902391239223932394239523962397239823992400240124022403240424052406240724082409241024112412241324142415241624172418241924202421242224232424242524262427242824292430243124322433243424352436243724382439244024412442244324442445244624472448244924502451245224532454245524562457245824592460246124622463246424652466246724682469247024712472247324742475247624772478247924802481248224832484248524862487248824892490249124922493249424952496249724982499250025012502250325042505250625072508250925102511251225132514251525162517251825192520252125222523252425252526252725282529253025312532253325342535253625372538253925402541254225432544254525462547254825492550255125522553255425552556255725582559256025612562256325642565256625672568256925702571257225732574257525762577257825792580258125822583258425852586258725882589259025912592259325942595259625972598259926002601260226032604260526062607260826092610261126122613261426152616261726182619262026212622262326242625262626272628262926302631263226332634263526362637263826392640264126422643264426452646264726482649265026512652265326542655265626572658265926602661266226632664266526662667266826692670267126722673267426752676267726782679268026812682268326842685268626872688268926902691269226932694269526962697269826992700270127022703270427052706270727082709271027112712271327142715271627172718271927202721272227232724272527262727272827292730273127322733273427352736273727382739274027412742274327442745274627472748274927502751275227532754275527562757275827592760276127622763276427652766276727682769277027712772277327742775277627772778277927802781278227832784278527862787278827892790279127922793279427952796279727982799280028012802280328042805280628072808280928102811281228132814281528162817281828192820282128222823282428252826282728282829283028312832283328342835283628372838283928402841284228432844284528462847284828492850285128522853285428552856285728582859286028612862286328642865286628672868286928702871287228732874287528762877287828792880288128822883288428852886288728882889289028912892289328942895289628972898289929002901290229032904290529062907290829092910291129122913291429152916291729182919292029212922292329242925292629272928292929302931293229332934293529362937293829392940294129422943294429452946294729482949295029512952295329542955295629572958295929602961296229632964296529662967296829692970297129722973297429752976297729782979298029812982298329842985298629872988298929902991299229932994299529962997299829993000300130023003300430053006300730083009301030113012301330143015301630173018301930203021302230233024302530263027302830293030303130323033303430353036303730383039304030413042304330443045304630473048304930503051305230533054305530563057305830593060306130623063306430653066306730683069307030713072307330743075307630773078307930803081308230833084308530863087308830893090309130923093309430953096309730983099310031013102310331043105310631073108310931103111311231133114311531163117311831193120312131223123312431253126312731283129313031313132313331343135313631373138313931403141314231433144314531463147314831493150315131523153315431553156315731583159316031613162316331643165316631673168316931703171317231733174317531763177317831793180318131823183318431853186318731883189319031913192319331943195319631973198319932003201320232033204320532063207320832093210321132123213321432153216321732183219322032213222322332243225322632273228322932303231323232333234323532363237323832393240324132423243324432453246324732483249325032513252325332543255325632573258325932603261326232633264326532663267326832693270327132723273327432753276327732783279328032813282328332843285328632873288328932903291329232933294329532963297329832993300330133023303330433053306330733083309331033113312331333143315331633173318331933203321332233233324332533263327332833293330333133323333333433353336333733383339334033413342334333443345334633473348334933503351335233533354335533563357335833593360336133623363336433653366336733683369337033713372337333743375337633773378337933803381338233833384338533863387338833893390339133923393339433953396339733983399340034013402340334043405340634073408340934103411341234133414341534163417341834193420342134223423342434253426342734283429343034313432343334343435343634373438343934403441344234433444344534463447344834493450345134523453345434553456345734583459346034613462346334643465346634673468346934703471347234733474347534763477347834793480348134823483348434853486348734883489349034913492349334943495349634973498349935003501350235033504350535063507350835093510351135123513351435153516351735183519352035213522352335243525352635273528352935303531353235333534353535363537353835393540354135423543354435453546354735483549355035513552355335543555355635573558355935603561356235633564356535663567356835693570357135723573357435753576357735783579358035813582358335843585358635873588358935903591359235933594359535963597359835993600360136023603360436053606360736083609361036113612361336143615361636173618361936203621362236233624362536263627362836293630363136323633363436353636363736383639364036413642364336443645364636473648364936503651365236533654365536563657365836593660366136623663366436653666366736683669367036713672367336743675367636773678367936803681368236833684368536863687368836893690369136923693369436953696369736983699370037013702370337043705370637073708370937103711371237133714371537163717371837193720372137223723372437253726372737283729373037313732373337343735373637373738373937403741374237433744374537463747374837493750375137523753375437553756375737583759376037613762376337643765376637673768376937703771377237733774377537763777377837793780378137823783378437853786378737883789379037913792379337943795379637973798379938003801380238033804380538063807380838093810381138123813381438153816381738183819382038213822382338243825382638273828382938303831383238333834383538363837383838393840384138423843384438453846384738483849385038513852385338543855385638573858385938603861386238633864386538663867386838693870387138723873387438753876387738783879388038813882388338843885388638873888388938903891389238933894389538963897389838993900390139023903390439053906390739083909391039113912391339143915391639173918391939203921392239233924392539263927392839293930393139323933393439353936393739383939394039413942394339443945394639473948394939503951395239533954395539563957395839593960396139623963396439653966396739683969397039713972397339743975397639773978397939803981398239833984398539863987398839893990399139923993399439953996399739983999400040014002400340044005400640074008400940104011401240134014401540164017401840194020402140224023402440254026402740284029403040314032403340344035403640374038403940404041404240434044404540464047404840494050405140524053405440554056405740584059406040614062406340644065406640674068406940704071407240734074407540764077407840794080408140824083408440854086408740884089409040914092409340944095409640974098409941004101410241034104410541064107410841094110411141124113411441154116411741184119412041214122412341244125412641274128412941304131413241334134413541364137413841394140414141424143414441454146414741484149415041514152415341544155415641574158415941604161416241634164416541664167416841694170417141724173417441754176417741784179418041814182418341844185418641874188418941904191419241934194419541964197419841994200420142024203420442054206420742084209421042114212421342144215421642174218421942204221422242234224422542264227422842294230423142324233423442354236423742384239424042414242424342444245424642474248424942504251425242534254425542564257425842594260426142624263426442654266426742684269427042714272427342744275427642774278427942804281428242834284428542864287428842894290429142924293429442954296429742984299430043014302430343044305430643074308430943104311431243134314431543164317431843194320432143224323432443254326432743284329433043314332433343344335433643374338433943404341434243434344434543464347434843494350435143524353435443554356435743584359436043614362436343644365436643674368436943704371437243734374437543764377437843794380438143824383438443854386438743884389439043914392439343944395439643974398439944004401440244034404440544064407440844094410441144124413441444154416441744184419442044214422442344244425442644274428442944304431443244334434443544364437443844394440444144424443444444454446444744484449445044514452445344544455445644574458445944604461446244634464446544664467446844694470447144724473447444754476447744784479448044814482448344844485448644874488448944904491449244934494449544964497449844994500450145024503450445054506450745084509451045114512451345144515451645174518451945204521452245234524452545264527452845294530453145324533453445354536453745384539454045414542454345444545454645474548454945504551455245534554455545564557455845594560456145624563456445654566456745684569457045714572457345744575457645774578457945804581458245834584458545864587458845894590459145924593459445954596459745984599460046014602460346044605460646074608460946104611461246134614461546164617461846194620462146224623462446254626462746284629463046314632463346344635463646374638463946404641464246434644464546464647464846494650465146524653465446554656465746584659466046614662466346644665466646674668466946704671467246734674467546764677467846794680468146824683468446854686468746884689469046914692469346944695469646974698469947004701470247034704470547064707470847094710471147124713471447154716471747184719472047214722472347244725472647274728472947304731473247334734473547364737473847394740474147424743474447454746474747484749475047514752475347544755475647574758475947604761476247634764476547664767476847694770477147724773477447754776477747784779478047814782478347844785478647874788478947904791479247934794479547964797479847994800480148024803480448054806480748084809481048114812481348144815481648174818481948204821482248234824482548264827482848294830483148324833483448354836483748384839484048414842484348444845484648474848484948504851485248534854485548564857485848594860486148624863486448654866486748684869487048714872487348744875487648774878487948804881488248834884488548864887488848894890489148924893489448954896489748984899490049014902490349044905490649074908490949104911491249134914491549164917491849194920492149224923492449254926492749284929493049314932493349344935493649374938493949404941494249434944494549464947494849494950495149524953495449554956495749584959496049614962496349644965496649674968496949704971497249734974497549764977497849794980498149824983498449854986498749884989499049914992499349944995499649974998499950005001500250035004500550065007500850095010501150125013501450155016501750185019502050215022502350245025502650275028502950305031503250335034503550365037503850395040504150425043504450455046504750485049505050515052505350545055505650575058505950605061506250635064506550665067506850695070507150725073507450755076507750785079508050815082508350845085508650875088508950905091509250935094509550965097509850995100510151025103510451055106510751085109511051115112511351145115511651175118511951205121512251235124512551265127512851295130513151325133513451355136513751385139514051415142514351445145514651475148514951505151515251535154515551565157515851595160516151625163516451655166516751685169517051715172517351745175517651775178517951805181518251835184518551865187518851895190519151925193519451955196519751985199520052015202520352045205520652075208520952105211521252135214521552165217521852195220522152225223522452255226522752285229523052315232523352345235523652375238523952405241524252435244524552465247524852495250525152525253525452555256525752585259526052615262526352645265526652675268526952705271527252735274527552765277527852795280528152825283528452855286528752885289529052915292529352945295529652975298529953005301530253035304530553065307530853095310531153125313531453155316531753185319532053215322532353245325532653275328532953305331533253335334533553365337533853395340534153425343534453455346534753485349535053515352535353545355535653575358535953605361536253635364536553665367536853695370537153725373537453755376537753785379538053815382538353845385538653875388538953905391539253935394539553965397539853995400540154025403540454055406540754085409541054115412541354145415541654175418541954205421542254235424542554265427542854295430543154325433543454355436543754385439544054415442544354445445544654475448544954505451545254535454545554565457545854595460546154625463546454655466546754685469547054715472547354745475547654775478547954805481548254835484548554865487548854895490549154925493549454955496549754985499550055015502550355045505550655075508550955105511551255135514551555165517551855195520552155225523552455255526552755285529553055315532553355345535553655375538553955405541554255435544554555465547554855495550555155525553555455555556555755585559556055615562556355645565556655675568556955705571557255735574557555765577557855795580558155825583558455855586558755885589559055915592559355945595559655975598559956005601560256035604560556065607560856095610561156125613561456155616561756185619562056215622562356245625562656275628562956305631563256335634563556365637563856395640564156425643564456455646564756485649565056515652565356545655565656575658565956605661566256635664566556665667566856695670567156725673567456755676567756785679568056815682568356845685568656875688568956905691569256935694569556965697569856995700570157025703570457055706570757085709571057115712571357145715571657175718571957205721572257235724572557265727572857295730573157325733573457355736573757385739574057415742574357445745574657475748574957505751575257535754575557565757575857595760576157625763576457655766576757685769577057715772577357745775577657775778577957805781578257835784578557865787578857895790579157925793579457955796579757985799580058015802580358045805580658075808580958105811581258135814581558165817581858195820582158225823582458255826582758285829583058315832583358345835583658375838583958405841584258435844584558465847584858495850585158525853585458555856585758585859586058615862586358645865586658675868586958705871587258735874587558765877587858795880588158825883588458855886588758885889589058915892589358945895589658975898589959005901590259035904590559065907590859095910591159125913591459155916591759185919592059215922592359245925592659275928592959305931593259335934593559365937593859395940594159425943594459455946594759485949595059515952595359545955595659575958595959605961596259635964596559665967596859695970597159725973597459755976597759785979598059815982598359845985598659875988598959905991599259935994599559965997599859996000600160026003600460056006600760086009601060116012601360146015601660176018601960206021602260236024602560266027602860296030603160326033603460356036603760386039604060416042604360446045604660476048604960506051605260536054605560566057605860596060606160626063606460656066606760686069607060716072607360746075607660776078607960806081608260836084608560866087608860896090609160926093609460956096609760986099610061016102610361046105610661076108610961106111611261136114611561166117611861196120612161226123612461256126612761286129613061316132613361346135613661376138613961406141614261436144614561466147614861496150615161526153615461556156615761586159616061616162616361646165616661676168616961706171617261736174617561766177617861796180618161826183618461856186618761886189619061916192619361946195619661976198619962006201620262036204620562066207620862096210621162126213621462156216621762186219622062216222622362246225622662276228622962306231623262336234623562366237623862396240624162426243624462456246624762486249625062516252625362546255625662576258625962606261626262636264626562666267626862696270627162726273627462756276627762786279628062816282628362846285628662876288628962906291629262936294629562966297629862996300630163026303630463056306630763086309631063116312631363146315631663176318631963206321632263236324632563266327632863296330633163326333633463356336633763386339634063416342634363446345634663476348634963506351635263536354635563566357635863596360636163626363636463656366636763686369637063716372637363746375637663776378637963806381638263836384638563866387638863896390639163926393639463956396639763986399640064016402640364046405640664076408640964106411641264136414641564166417641864196420642164226423642464256426642764286429643064316432643364346435643664376438643964406441644264436444644564466447644864496450645164526453645464556456645764586459646064616462646364646465646664676468646964706471647264736474647564766477647864796480648164826483648464856486648764886489649064916492649364946495649664976498649965006501650265036504650565066507650865096510651165126513651465156516651765186519652065216522652365246525652665276528652965306531653265336534653565366537653865396540654165426543654465456546654765486549655065516552655365546555655665576558655965606561656265636564656565666567656865696570657165726573657465756576657765786579658065816582658365846585658665876588658965906591659265936594659565966597659865996600660166026603660466056606660766086609661066116612661366146615661666176618661966206621662266236624662566266627662866296630663166326633663466356636663766386639664066416642664366446645664666476648664966506651665266536654665566566657665866596660666166626663666466656666666766686669667066716672667366746675667666776678667966806681668266836684668566866687668866896690669166926693669466956696669766986699670067016702670367046705670667076708670967106711671267136714671567166717671867196720672167226723672467256726672767286729673067316732673367346735673667376738673967406741674267436744674567466747674867496750675167526753675467556756675767586759676067616762676367646765676667676768676967706771677267736774677567766777677867796780678167826783678467856786678767886789679067916792679367946795679667976798679968006801680268036804680568066807680868096810681168126813681468156816681768186819682068216822682368246825682668276828682968306831683268336834683568366837683868396840684168426843684468456846684768486849685068516852685368546855685668576858685968606861686268636864686568666867686868696870687168726873687468756876687768786879688068816882688368846885688668876888688968906891689268936894689568966897689868996900690169026903690469056906690769086909691069116912691369146915691669176918691969206921692269236924692569266927692869296930693169326933693469356936693769386939694069416942694369446945694669476948694969506951695269536954695569566957695869596960696169626963696469656966696769686969697069716972697369746975697669776978697969806981698269836984698569866987698869896990699169926993699469956996699769986999700070017002700370047005700670077008700970107011701270137014701570167017701870197020702170227023702470257026702770287029703070317032703370347035703670377038703970407041704270437044704570467047704870497050705170527053705470557056705770587059706070617062706370647065706670677068706970707071707270737074707570767077707870797080708170827083708470857086708770887089709070917092709370947095709670977098709971007101710271037104710571067107710871097110711171127113711471157116711771187119712071217122712371247125712671277128712971307131713271337134713571367137713871397140714171427143714471457146714771487149715071517152715371547155715671577158715971607161716271637164716571667167716871697170717171727173717471757176717771787179718071817182718371847185718671877188718971907191719271937194719571967197719871997200720172027203720472057206720772087209721072117212721372147215721672177218721972207221722272237224722572267227722872297230723172327233723472357236723772387239724072417242724372447245724672477248724972507251725272537254725572567257725872597260726172627263726472657266726772687269727072717272727372747275727672777278727972807281728272837284728572867287728872897290729172927293729472957296729772987299730073017302730373047305730673077308730973107311731273137314731573167317731873197320732173227323732473257326732773287329733073317332733373347335733673377338733973407341734273437344734573467347734873497350735173527353735473557356735773587359736073617362736373647365736673677368736973707371737273737374737573767377737873797380738173827383738473857386738773887389739073917392739373947395739673977398739974007401740274037404740574067407740874097410741174127413741474157416741774187419742074217422742374247425742674277428742974307431743274337434743574367437743874397440744174427443744474457446744774487449745074517452745374547455745674577458745974607461746274637464746574667467746874697470747174727473747474757476747774787479748074817482748374847485748674877488748974907491749274937494749574967497749874997500750175027503750475057506750775087509751075117512751375147515751675177518751975207521752275237524752575267527752875297530753175327533753475357536753775387539754075417542754375447545754675477548754975507551755275537554755575567557755875597560756175627563756475657566756775687569757075717572757375747575757675777578757975807581758275837584758575867587758875897590759175927593759475957596759775987599760076017602760376047605760676077608760976107611761276137614761576167617761876197620762176227623762476257626762776287629763076317632763376347635763676377638763976407641764276437644764576467647764876497650765176527653765476557656765776587659766076617662766376647665766676677668766976707671767276737674767576767677767876797680768176827683768476857686768776887689769076917692769376947695769676977698769977007701770277037704770577067707770877097710771177127713771477157716771777187719772077217722772377247725772677277728772977307731773277337734773577367737773877397740774177427743774477457746774777487749775077517752775377547755775677577758775977607761776277637764776577667767776877697770777177727773777477757776777777787779778077817782778377847785778677877788778977907791779277937794779577967797779877997800780178027803780478057806780778087809781078117812781378147815781678177818781978207821782278237824782578267827782878297830783178327833783478357836783778387839784078417842784378447845784678477848784978507851785278537854785578567857785878597860786178627863786478657866786778687869787078717872787378747875787678777878787978807881788278837884788578867887788878897890789178927893789478957896789778987899790079017902790379047905790679077908790979107911791279137914791579167917791879197920792179227923792479257926792779287929793079317932793379347935793679377938793979407941794279437944794579467947794879497950795179527953795479557956795779587959796079617962796379647965796679677968796979707971797279737974797579767977797879797980798179827983798479857986798779887989799079917992799379947995799679977998799980008001800280038004800580068007800880098010801180128013801480158016801780188019802080218022802380248025802680278028802980308031803280338034803580368037803880398040804180428043804480458046804780488049805080518052805380548055805680578058805980608061806280638064806580668067806880698070807180728073807480758076807780788079808080818082808380848085808680878088808980908091809280938094809580968097809880998100810181028103810481058106810781088109811081118112811381148115811681178118811981208121812281238124812581268127812881298130813181328133813481358136813781388139814081418142814381448145814681478148814981508151815281538154815581568157815881598160816181628163816481658166816781688169817081718172817381748175817681778178817981808181818281838184818581868187818881898190819181928193819481958196819781988199820082018202820382048205820682078208820982108211821282138214821582168217821882198220822182228223822482258226822782288229823082318232823382348235823682378238823982408241824282438244824582468247824882498250825182528253825482558256825782588259826082618262826382648265826682678268826982708271827282738274827582768277827882798280828182828283828482858286828782888289829082918292829382948295829682978298829983008301830283038304830583068307830883098310831183128313831483158316831783188319832083218322832383248325832683278328832983308331833283338334833583368337833883398340834183428343834483458346834783488349835083518352835383548355835683578358835983608361836283638364836583668367836883698370837183728373837483758376837783788379838083818382838383848385838683878388838983908391839283938394839583968397839883998400840184028403840484058406840784088409841084118412841384148415841684178418841984208421842284238424842584268427842884298430843184328433843484358436843784388439844084418442844384448445844684478448844984508451845284538454845584568457845884598460846184628463846484658466846784688469847084718472847384748475847684778478847984808481848284838484848584868487848884898490849184928493849484958496849784988499850085018502850385048505850685078508850985108511851285138514851585168517851885198520852185228523852485258526852785288529853085318532853385348535853685378538853985408541854285438544854585468547854885498550855185528553855485558556855785588559856085618562856385648565856685678568856985708571857285738574857585768577857885798580858185828583858485858586858785888589859085918592859385948595859685978598859986008601860286038604860586068607860886098610861186128613861486158616861786188619862086218622862386248625862686278628862986308631863286338634863586368637863886398640864186428643864486458646864786488649865086518652865386548655865686578658865986608661866286638664866586668667866886698670867186728673867486758676867786788679868086818682868386848685868686878688868986908691869286938694869586968697869886998700870187028703870487058706870787088709871087118712871387148715871687178718871987208721872287238724872587268727872887298730873187328733873487358736873787388739874087418742874387448745874687478748874987508751875287538754875587568757875887598760876187628763876487658766876787688769877087718772877387748775877687778778877987808781878287838784878587868787878887898790879187928793879487958796879787988799880088018802880388048805880688078808880988108811881288138814881588168817881888198820882188228823882488258826882788288829883088318832883388348835883688378838883988408841884288438844884588468847884888498850885188528853885488558856885788588859886088618862886388648865886688678868886988708871887288738874887588768877887888798880888188828883888488858886888788888889889088918892889388948895889688978898889989008901890289038904890589068907890889098910891189128913891489158916891789188919892089218922892389248925892689278928892989308931893289338934893589368937893889398940894189428943894489458946894789488949895089518952895389548955895689578958895989608961896289638964896589668967896889698970897189728973897489758976897789788979898089818982898389848985898689878988898989908991899289938994899589968997899889999000900190029003900490059006900790089009901090119012901390149015901690179018901990209021902290239024902590269027902890299030903190329033903490359036903790389039904090419042904390449045904690479048904990509051905290539054905590569057905890599060906190629063906490659066906790689069907090719072907390749075907690779078907990809081908290839084908590869087908890899090909190929093909490959096909790989099910091019102910391049105910691079108910991109111911291139114911591169117911891199120912191229123912491259126912791289129913091319132913391349135913691379138913991409141914291439144914591469147914891499150915191529153915491559156915791589159916091619162916391649165916691679168916991709171917291739174917591769177917891799180918191829183918491859186918791889189919091919192919391949195919691979198919992009201920292039204920592069207920892099210921192129213921492159216921792189219922092219222922392249225922692279228922992309231923292339234923592369237923892399240924192429243924492459246924792489249925092519252925392549255925692579258925992609261926292639264926592669267926892699270927192729273927492759276927792789279928092819282928392849285928692879288928992909291929292939294929592969297929892999300930193029303930493059306930793089309931093119312931393149315931693179318931993209321932293239324932593269327932893299330933193329333933493359336933793389339934093419342934393449345934693479348934993509351935293539354935593569357935893599360936193629363936493659366936793689369937093719372937393749375937693779378937993809381938293839384938593869387938893899390939193929393939493959396939793989399940094019402940394049405940694079408940994109411941294139414941594169417941894199420942194229423942494259426942794289429943094319432943394349435943694379438943994409441944294439444944594469447944894499450945194529453945494559456945794589459946094619462946394649465946694679468946994709471947294739474947594769477947894799480948194829483948494859486948794889489949094919492949394949495949694979498949995009501950295039504950595069507950895099510951195129513951495159516951795189519952095219522952395249525952695279528952995309531953295339534953595369537953895399540954195429543954495459546954795489549955095519552955395549555955695579558955995609561956295639564956595669567956895699570957195729573957495759576957795789579958095819582958395849585958695879588958995909591959295939594959595969597959895999600960196029603960496059606960796089609961096119612961396149615961696179618961996209621962296239624962596269627962896299630963196329633963496359636963796389639964096419642964396449645964696479648964996509651965296539654965596569657965896599660966196629663966496659666966796689669967096719672967396749675967696779678967996809681968296839684968596869687968896899690969196929693969496959696969796989699970097019702970397049705970697079708970997109711971297139714971597169717971897199720972197229723972497259726972797289729973097319732973397349735973697379738973997409741974297439744974597469747974897499750975197529753975497559756975797589759976097619762976397649765976697679768976997709771977297739774977597769777977897799780978197829783978497859786978797889789979097919792979397949795979697979798979998009801980298039804980598069807980898099810981198129813981498159816981798189819982098219822982398249825982698279828982998309831983298339834983598369837983898399840984198429843984498459846984798489849985098519852985398549855985698579858985998609861986298639864986598669867986898699870987198729873987498759876987798789879988098819882988398849885988698879888988998909891989298939894989598969897989898999900990199029903990499059906990799089909991099119912991399149915991699179918991999209921992299239924992599269927992899299930993199329933993499359936993799389939994099419942994399449945994699479948994999509951995299539954995599569957995899599960996199629963996499659966996799689969997099719972997399749975997699779978997999809981998299839984998599869987998899899990999199929993999499959996999799989999100001000110002100031000410005100061000710008100091001010011100121001310014100151001610017100181001910020100211002210023100241002510026100271002810029100301003110032100331003410035100361003710038100391004010041100421004310044100451004610047100481004910050100511005210053100541005510056100571005810059100601006110062100631006410065100661006710068100691007010071100721007310074100751007610077100781007910080100811008210083100841008510086100871008810089100901009110092100931009410095100961009710098100991010010101101021010310104101051010610107101081010910110101111011210113101141011510116101171011810119101201012110122101231012410125101261012710128101291013010131101321013310134101351013610137101381013910140101411014210143101441014510146101471014810149101501015110152101531015410155101561015710158101591016010161101621016310164101651016610167101681016910170101711017210173101741017510176101771017810179101801018110182101831018410185101861018710188101891019010191101921019310194101951019610197101981019910200102011020210203102041020510206102071020810209102101021110212102131021410215102161021710218102191022010221102221022310224102251022610227102281022910230102311023210233102341023510236102371023810239102401024110242102431024410245102461024710248102491025010251102521025310254102551025610257102581025910260102611026210263102641026510266102671026810269102701027110272102731027410275102761027710278102791028010281102821028310284102851028610287102881028910290102911029210293102941029510296102971029810299103001030110302103031030410305103061030710308103091031010311103121031310314103151031610317103181031910320103211032210323103241032510326103271032810329103301033110332103331033410335103361033710338103391034010341103421034310344103451034610347103481034910350103511035210353103541035510356103571035810359103601036110362103631036410365103661036710368103691037010371103721037310374103751037610377103781037910380103811038210383103841038510386103871038810389103901039110392103931039410395103961039710398103991040010401104021040310404104051040610407104081040910410104111041210413104141041510416104171041810419104201042110422104231042410425104261042710428104291043010431104321043310434104351043610437104381043910440104411044210443104441044510446104471044810449104501045110452104531045410455104561045710458104591046010461104621046310464104651046610467104681046910470104711047210473104741047510476104771047810479104801048110482104831048410485104861048710488104891049010491104921049310494104951049610497104981049910500105011050210503105041050510506105071050810509105101051110512105131051410515105161051710518105191052010521105221052310524105251052610527105281052910530105311053210533105341053510536105371053810539105401054110542105431054410545105461054710548105491055010551105521055310554105551055610557105581055910560105611056210563105641056510566105671056810569105701057110572105731057410575105761057710578105791058010581105821058310584105851058610587105881058910590105911059210593105941059510596105971059810599106001060110602106031060410605106061060710608106091061010611106121061310614106151061610617106181061910620106211062210623106241062510626106271062810629106301063110632106331063410635106361063710638106391064010641106421064310644106451064610647106481064910650106511065210653106541065510656106571065810659106601066110662106631066410665106661066710668106691067010671106721067310674106751067610677106781067910680106811068210683106841068510686106871068810689106901069110692106931069410695106961069710698106991070010701107021070310704107051070610707107081070910710107111071210713107141071510716107171071810719107201072110722107231072410725107261072710728107291073010731107321073310734107351073610737107381073910740107411074210743107441074510746107471074810749107501075110752107531075410755107561075710758107591076010761107621076310764107651076610767107681076910770107711077210773107741077510776107771077810779107801078110782107831078410785107861078710788107891079010791107921079310794107951079610797107981079910800108011080210803108041080510806108071080810809108101081110812108131081410815108161081710818108191082010821108221082310824108251082610827108281082910830108311083210833108341083510836108371083810839108401084110842108431084410845108461084710848108491085010851108521085310854108551085610857108581085910860108611086210863108641086510866108671086810869108701087110872108731087410875108761087710878108791088010881108821088310884108851088610887108881088910890108911089210893108941089510896108971089810899109001090110902109031090410905109061090710908109091091010911109121091310914109151091610917109181091910920109211092210923109241092510926109271092810929109301093110932109331093410935109361093710938109391094010941109421094310944109451094610947109481094910950109511095210953109541095510956109571095810959109601096110962109631096410965109661096710968109691097010971109721097310974109751097610977109781097910980109811098210983109841098510986109871098810989109901099110992109931099410995109961099710998109991100011001110021100311004110051100611007110081100911010110111101211013110141101511016110171101811019110201102111022110231102411025110261102711028110291103011031110321103311034110351103611037110381103911040110411104211043110441104511046110471104811049110501105111052110531105411055110561105711058110591106011061110621106311064110651106611067110681106911070110711107211073110741107511076110771107811079110801108111082110831108411085110861108711088110891109011091110921109311094110951109611097110981109911100111011110211103111041110511106111071110811109111101111111112111131111411115111161111711118111191112011121111221112311124111251112611127111281112911130111311113211133111341113511136111371113811139111401114111142111431114411145111461114711148111491115011151111521115311154111551115611157111581115911160111611116211163111641116511166111671116811169111701117111172111731117411175111761117711178111791118011181111821118311184111851118611187111881118911190111911119211193111941119511196111971119811199112001120111202112031120411205112061120711208112091121011211112121121311214112151121611217112181121911220112211122211223112241122511226112271122811229112301123111232112331123411235112361123711238112391124011241112421124311244112451124611247112481124911250112511125211253112541125511256112571125811259112601126111262112631126411265112661126711268112691127011271112721127311274112751127611277112781127911280112811128211283112841128511286112871128811289112901129111292112931129411295112961129711298112991130011301113021130311304113051130611307113081130911310113111131211313113141131511316113171131811319113201132111322113231132411325113261132711328113291133011331113321133311334113351133611337113381133911340113411134211343113441134511346113471134811349113501135111352113531135411355113561135711358113591136011361113621136311364113651136611367113681136911370113711137211373113741137511376113771137811379113801138111382113831138411385113861138711388113891139011391113921139311394113951139611397113981139911400114011140211403114041140511406114071140811409114101141111412114131141411415114161141711418114191142011421114221142311424114251142611427114281142911430114311143211433114341143511436114371143811439114401144111442114431144411445114461144711448114491145011451114521145311454114551145611457114581145911460114611146211463114641146511466114671146811469114701147111472114731147411475114761147711478114791148011481114821148311484114851148611487114881148911490114911149211493114941149511496114971149811499115001150111502115031150411505115061150711508115091151011511115121151311514115151151611517115181151911520115211152211523115241152511526115271152811529115301153111532115331153411535115361153711538115391154011541115421154311544115451154611547115481154911550115511155211553115541155511556115571155811559115601156111562115631156411565115661156711568115691157011571115721157311574115751157611577115781157911580115811158211583115841158511586115871158811589115901159111592115931159411595115961159711598115991160011601116021160311604116051160611607116081160911610116111161211613116141161511616116171161811619116201162111622116231162411625116261162711628116291163011631116321163311634116351163611637116381163911640116411164211643116441164511646116471164811649116501165111652116531165411655116561165711658116591166011661116621166311664116651166611667116681166911670116711167211673116741167511676116771167811679116801168111682116831168411685116861168711688116891169011691116921169311694116951169611697116981169911700117011170211703117041170511706117071170811709117101171111712117131171411715117161171711718117191172011721117221172311724117251172611727117281172911730117311173211733117341173511736117371173811739117401174111742117431174411745117461174711748117491175011751117521175311754117551175611757117581175911760117611176211763117641176511766117671176811769117701177111772117731177411775117761177711778117791178011781117821178311784117851178611787117881178911790117911179211793117941179511796117971179811799118001180111802118031180411805118061180711808118091181011811118121181311814118151181611817118181181911820118211182211823118241182511826118271182811829118301183111832118331183411835118361183711838118391184011841118421184311844118451184611847118481184911850118511185211853118541185511856118571185811859118601186111862118631186411865118661186711868118691187011871118721187311874118751187611877118781187911880118811188211883118841188511886118871188811889118901189111892118931189411895118961189711898118991190011901119021190311904119051190611907119081190911910119111191211913119141191511916119171191811919119201192111922119231192411925119261192711928119291193011931119321193311934119351193611937119381193911940119411194211943119441194511946119471194811949119501195111952119531195411955119561195711958119591196011961119621196311964119651196611967119681196911970119711197211973119741197511976119771197811979119801198111982119831198411985119861198711988119891199011991119921199311994119951199611997119981199912000120011200212003120041200512006120071200812009120101201112012120131201412015120161201712018120191202012021120221202312024120251202612027120281202912030120311203212033120341203512036120371203812039120401204112042120431204412045120461204712048120491205012051120521205312054120551205612057120581205912060120611206212063120641206512066120671206812069120701207112072120731207412075120761207712078120791208012081120821208312084120851208612087120881208912090120911209212093120941209512096120971209812099121001210112102121031210412105121061210712108121091211012111121121211312114121151211612117121181211912120121211212212123121241212512126121271212812129121301213112132121331213412135121361213712138121391214012141121421214312144121451214612147121481214912150121511215212153121541215512156121571215812159121601216112162121631216412165121661216712168121691217012171121721217312174121751217612177121781217912180121811218212183121841218512186121871218812189121901219112192121931219412195121961219712198121991220012201122021220312204122051220612207122081220912210122111221212213122141221512216122171221812219122201222112222122231222412225122261222712228122291223012231122321223312234122351223612237122381223912240122411224212243122441224512246122471224812249122501225112252122531225412255122561225712258122591226012261122621226312264122651226612267122681226912270122711227212273122741227512276122771227812279122801228112282122831228412285122861228712288122891229012291122921229312294122951229612297122981229912300123011230212303123041230512306123071230812309123101231112312123131231412315123161231712318123191232012321123221232312324123251232612327123281232912330123311233212333123341233512336123371233812339123401234112342123431234412345123461234712348123491235012351123521235312354123551235612357123581235912360123611236212363123641236512366123671236812369123701237112372123731237412375123761237712378123791238012381123821238312384123851238612387123881238912390123911239212393123941239512396123971239812399124001240112402124031240412405124061240712408124091241012411124121241312414124151241612417124181241912420124211242212423124241242512426124271242812429124301243112432124331243412435124361243712438124391244012441124421244312444124451244612447124481244912450124511245212453124541245512456124571245812459124601246112462124631246412465124661246712468124691247012471124721247312474124751247612477124781247912480124811248212483124841248512486124871248812489124901249112492124931249412495124961249712498124991250012501125021250312504125051250612507125081250912510125111251212513125141251512516125171251812519125201252112522125231252412525125261252712528125291253012531125321253312534125351253612537125381253912540125411254212543125441254512546125471254812549125501255112552125531255412555125561255712558125591256012561125621256312564125651256612567125681256912570125711257212573125741257512576125771257812579125801258112582125831258412585125861258712588125891259012591125921259312594125951259612597125981259912600126011260212603126041260512606126071260812609126101261112612126131261412615126161261712618126191262012621126221262312624126251262612627126281262912630126311263212633126341263512636126371263812639126401264112642126431264412645126461264712648126491265012651126521265312654126551265612657126581265912660126611266212663126641266512666126671266812669126701267112672126731267412675126761267712678126791268012681126821268312684126851268612687126881268912690126911269212693126941269512696126971269812699127001270112702127031270412705127061270712708127091271012711127121271312714127151271612717127181271912720127211272212723127241272512726127271272812729127301273112732127331273412735127361273712738127391274012741127421274312744127451274612747127481274912750127511275212753127541275512756127571275812759127601276112762127631276412765127661276712768127691277012771127721277312774127751277612777127781277912780127811278212783127841278512786127871278812789127901279112792127931279412795127961279712798127991280012801128021280312804128051280612807128081280912810128111281212813128141281512816128171281812819128201282112822128231282412825128261282712828128291283012831128321283312834128351283612837128381283912840128411284212843128441284512846128471284812849128501285112852128531285412855128561285712858128591286012861128621286312864128651286612867128681286912870128711287212873128741287512876128771287812879128801288112882128831288412885128861288712888128891289012891128921289312894128951289612897128981289912900129011290212903129041290512906129071290812909129101291112912129131291412915129161291712918129191292012921129221292312924129251292612927129281292912930129311293212933129341293512936129371293812939129401294112942129431294412945129461294712948129491295012951129521295312954129551295612957129581295912960129611296212963129641296512966129671296812969129701297112972129731297412975129761297712978129791298012981129821298312984129851298612987129881298912990129911299212993129941299512996129971299812999130001300113002130031300413005130061300713008130091301013011130121301313014130151301613017130181301913020130211302213023130241302513026130271302813029130301303113032130331303413035130361303713038130391304013041130421304313044130451304613047130481304913050130511305213053130541305513056130571305813059130601306113062130631306413065130661306713068130691307013071130721307313074130751307613077130781307913080130811308213083130841308513086130871308813089130901309113092130931309413095130961309713098130991310013101131021310313104131051310613107131081310913110131111311213113131141311513116131171311813119131201312113122131231312413125131261312713128131291313013131131321313313134131351313613137131381313913140131411314213143131441314513146131471314813149131501315113152131531315413155131561315713158131591316013161131621316313164131651316613167131681316913170131711317213173131741317513176131771317813179131801318113182131831318413185131861318713188131891319013191131921319313194131951319613197131981319913200132011320213203132041320513206132071320813209132101321113212132131321413215132161321713218132191322013221132221322313224132251322613227132281322913230132311323213233132341323513236132371323813239132401324113242132431324413245132461324713248132491325013251132521325313254132551325613257132581325913260132611326213263132641326513266132671326813269132701327113272132731327413275132761327713278132791328013281132821328313284132851328613287132881328913290132911329213293132941329513296132971329813299133001330113302133031330413305133061330713308133091331013311133121331313314133151331613317133181331913320133211332213323133241332513326133271332813329133301333113332133331333413335133361333713338133391334013341133421334313344133451334613347133481334913350133511335213353133541335513356133571335813359133601336113362133631336413365133661336713368133691337013371133721337313374133751337613377133781337913380133811338213383133841338513386133871338813389133901339113392133931339413395133961339713398133991340013401134021340313404134051340613407134081340913410134111341213413134141341513416134171341813419134201342113422134231342413425134261342713428134291343013431134321343313434134351343613437134381343913440134411344213443134441344513446134471344813449134501345113452134531345413455134561345713458134591346013461134621346313464134651346613467134681346913470134711347213473134741347513476134771347813479134801348113482134831348413485134861348713488134891349013491134921349313494134951349613497134981349913500135011350213503135041350513506135071350813509135101351113512135131351413515135161351713518135191352013521135221352313524135251352613527135281352913530135311353213533135341353513536135371353813539135401354113542135431354413545135461354713548135491355013551135521355313554135551355613557135581355913560135611356213563135641356513566135671356813569135701357113572135731357413575135761357713578135791358013581135821358313584135851358613587135881358913590135911359213593135941359513596135971359813599136001360113602136031360413605136061360713608136091361013611136121361313614136151361613617136181361913620136211362213623136241362513626136271362813629136301363113632136331363413635136361363713638136391364013641136421364313644136451364613647136481364913650136511365213653136541365513656136571365813659136601366113662136631366413665136661366713668136691367013671136721367313674136751367613677136781367913680136811368213683136841368513686136871368813689136901369113692136931369413695136961369713698136991370013701137021370313704137051370613707137081370913710137111371213713137141371513716137171371813719137201372113722137231372413725137261372713728137291373013731137321373313734137351373613737137381373913740137411374213743137441374513746137471374813749137501375113752137531375413755137561375713758137591376013761137621376313764137651376613767137681376913770137711377213773137741377513776137771377813779137801378113782137831378413785137861378713788137891379013791137921379313794137951379613797137981379913800138011380213803138041380513806138071380813809138101381113812138131381413815138161381713818138191382013821138221382313824138251382613827138281382913830138311383213833138341383513836138371383813839138401384113842138431384413845138461384713848138491385013851138521385313854138551385613857138581385913860138611386213863138641386513866138671386813869138701387113872138731387413875138761387713878138791388013881138821388313884138851388613887138881388913890138911389213893138941389513896138971389813899139001390113902139031390413905139061390713908139091391013911139121391313914139151391613917139181391913920139211392213923139241392513926139271392813929139301393113932139331393413935139361393713938139391394013941139421394313944139451394613947139481394913950139511395213953139541395513956139571395813959139601396113962139631396413965139661396713968139691397013971139721397313974139751397613977139781397913980139811398213983139841398513986139871398813989139901399113992139931399413995139961399713998139991400014001140021400314004140051400614007140081400914010140111401214013140141401514016140171401814019140201402114022140231402414025140261402714028140291403014031140321403314034140351403614037140381403914040140411404214043140441404514046140471404814049140501405114052140531405414055140561405714058140591406014061140621406314064140651406614067140681406914070140711407214073140741407514076140771407814079140801408114082140831408414085140861408714088140891409014091140921409314094140951409614097140981409914100141011410214103141041410514106141071410814109141101411114112141131411414115141161411714118141191412014121141221412314124141251412614127141281412914130141311413214133141341413514136141371413814139141401414114142141431414414145141461414714148141491415014151141521415314154141551415614157141581415914160141611416214163141641416514166141671416814169141701417114172141731417414175141761417714178141791418014181141821418314184141851418614187141881418914190141911419214193141941419514196141971419814199142001420114202142031420414205142061420714208142091421014211142121421314214142151421614217142181421914220142211422214223142241422514226142271422814229142301423114232142331423414235142361423714238142391424014241142421424314244142451424614247142481424914250142511425214253142541425514256142571425814259142601426114262142631426414265142661426714268142691427014271142721427314274142751427614277142781427914280142811428214283142841428514286142871428814289142901429114292142931429414295142961429714298142991430014301143021430314304143051430614307143081430914310143111431214313143141431514316143171431814319143201432114322143231432414325143261432714328143291433014331143321433314334143351433614337143381433914340143411434214343143441434514346143471434814349143501435114352143531435414355143561435714358143591436014361143621436314364143651436614367143681436914370143711437214373143741437514376143771437814379143801438114382143831438414385143861438714388143891439014391143921439314394143951439614397143981439914400144011440214403144041440514406144071440814409144101441114412144131441414415144161441714418144191442014421144221442314424144251442614427144281442914430144311443214433144341443514436144371443814439144401444114442144431444414445144461444714448144491445014451144521445314454144551445614457144581445914460144611446214463144641446514466144671446814469144701447114472144731447414475144761447714478144791448014481144821448314484144851448614487144881448914490144911449214493144941449514496144971449814499145001450114502145031450414505145061450714508145091451014511145121451314514145151451614517145181451914520145211452214523145241452514526145271452814529145301453114532145331453414535145361453714538145391454014541145421454314544145451454614547145481454914550145511455214553145541455514556145571455814559145601456114562145631456414565145661456714568145691457014571145721457314574145751457614577145781457914580145811458214583145841458514586145871458814589145901459114592145931459414595145961459714598145991460014601146021460314604146051460614607146081460914610146111461214613146141461514616146171461814619146201462114622146231462414625146261462714628146291463014631146321463314634146351463614637146381463914640146411464214643146441464514646146471464814649146501465114652146531465414655146561465714658146591466014661146621466314664146651466614667146681466914670146711467214673146741467514676146771467814679146801468114682146831468414685146861468714688146891469014691146921469314694146951469614697146981469914700147011470214703147041470514706147071470814709147101471114712147131471414715147161471714718147191472014721147221472314724147251472614727147281472914730147311473214733147341473514736147371473814739147401474114742147431474414745147461474714748147491475014751147521475314754147551475614757147581475914760147611476214763147641476514766147671476814769147701477114772147731477414775147761477714778147791478014781147821478314784147851478614787147881478914790147911479214793147941479514796147971479814799148001480114802148031480414805148061480714808148091481014811148121481314814148151481614817148181481914820148211482214823148241482514826148271482814829148301483114832148331483414835148361483714838148391484014841148421484314844148451484614847148481484914850148511485214853148541485514856148571485814859148601486114862148631486414865148661486714868148691487014871148721487314874148751487614877148781487914880148811488214883148841488514886148871488814889148901489114892148931489414895148961489714898148991490014901149021490314904149051490614907149081490914910149111491214913149141491514916149171491814919149201492114922149231492414925149261492714928149291493014931149321493314934149351493614937149381493914940149411494214943149441494514946149471494814949149501495114952149531495414955149561495714958149591496014961149621496314964149651496614967149681496914970149711497214973149741497514976149771497814979149801498114982149831498414985149861498714988149891499014991149921499314994149951499614997149981499915000150011500215003150041500515006150071500815009150101501115012150131501415015150161501715018150191502015021150221502315024150251502615027150281502915030150311503215033150341503515036150371503815039150401504115042150431504415045150461504715048150491505015051150521505315054150551505615057150581505915060150611506215063150641506515066150671506815069150701507115072150731507415075150761507715078150791508015081150821508315084150851508615087150881508915090150911509215093150941509515096150971509815099151001510115102151031510415105151061510715108151091511015111151121511315114151151511615117151181511915120151211512215123151241512515126151271512815129151301513115132151331513415135151361513715138151391514015141151421514315144151451514615147151481514915150151511515215153151541515515156151571515815159151601516115162151631516415165151661516715168151691517015171151721517315174151751517615177151781517915180151811518215183151841518515186151871518815189151901519115192151931519415195151961519715198151991520015201152021520315204152051520615207152081520915210152111521215213152141521515216152171521815219152201522115222152231522415225152261522715228152291523015231152321523315234152351523615237152381523915240152411524215243152441524515246152471524815249152501525115252152531525415255152561525715258152591526015261152621526315264152651526615267152681526915270152711527215273152741527515276152771527815279152801528115282152831528415285152861528715288152891529015291152921529315294152951529615297152981529915300153011530215303153041530515306153071530815309153101531115312153131531415315153161531715318153191532015321153221532315324153251532615327153281532915330153311533215333153341533515336153371533815339153401534115342153431534415345153461534715348153491535015351153521535315354153551535615357153581535915360153611536215363153641536515366153671536815369153701537115372153731537415375153761537715378153791538015381153821538315384153851538615387153881538915390153911539215393153941539515396153971539815399154001540115402154031540415405154061540715408154091541015411154121541315414154151541615417154181541915420154211542215423154241542515426154271542815429154301543115432154331543415435154361543715438154391544015441154421544315444154451544615447154481544915450154511545215453154541545515456154571545815459154601546115462154631546415465154661546715468154691547015471154721547315474154751547615477154781547915480154811548215483154841548515486154871548815489154901549115492154931549415495154961549715498154991550015501155021550315504155051550615507155081550915510155111551215513155141551515516155171551815519155201552115522155231552415525155261552715528155291553015531155321553315534155351553615537155381553915540155411554215543155441554515546155471554815549155501555115552155531555415555155561555715558155591556015561155621556315564155651556615567155681556915570155711557215573155741557515576155771557815579155801558115582155831558415585155861558715588155891559015591155921559315594155951559615597155981559915600156011560215603156041560515606156071560815609156101561115612156131561415615156161561715618156191562015621156221562315624156251562615627156281562915630156311563215633156341563515636156371563815639156401564115642156431564415645156461564715648156491565015651156521565315654156551565615657156581565915660156611566215663156641566515666156671566815669156701567115672156731567415675156761567715678156791568015681156821568315684156851568615687156881568915690156911569215693156941569515696156971569815699157001570115702157031570415705157061570715708157091571015711157121571315714157151571615717157181571915720157211572215723157241572515726157271572815729157301573115732157331573415735157361573715738157391574015741157421574315744157451574615747157481574915750157511575215753157541575515756157571575815759157601576115762157631576415765157661576715768157691577015771157721577315774157751577615777157781577915780157811578215783157841578515786157871578815789157901579115792157931579415795157961579715798157991580015801158021580315804158051580615807158081580915810158111581215813158141581515816158171581815819158201582115822158231582415825158261582715828158291583015831158321583315834158351583615837158381583915840158411584215843158441584515846158471584815849158501585115852158531585415855158561585715858158591586015861158621586315864158651586615867158681586915870158711587215873158741587515876158771587815879158801588115882158831588415885158861588715888158891589015891158921589315894158951589615897158981589915900159011590215903159041590515906159071590815909159101591115912159131591415915159161591715918159191592015921159221592315924159251592615927159281592915930159311593215933159341593515936159371593815939159401594115942159431594415945159461594715948159491595015951159521595315954159551595615957159581595915960159611596215963159641596515966159671596815969159701597115972159731597415975159761597715978159791598015981159821598315984159851598615987159881598915990159911599215993159941599515996159971599815999160001600116002160031600416005160061600716008160091601016011160121601316014160151601616017160181601916020160211602216023160241602516026160271602816029160301603116032160331603416035160361603716038160391604016041160421604316044160451604616047160481604916050160511605216053160541605516056160571605816059160601606116062160631606416065160661606716068160691607016071160721607316074160751607616077160781607916080160811608216083160841608516086160871608816089160901609116092160931609416095160961609716098160991610016101161021610316104161051610616107161081610916110161111611216113161141611516116161171611816119161201612116122161231612416125161261612716128161291613016131161321613316134161351613616137161381613916140161411614216143161441614516146161471614816149161501615116152161531615416155161561615716158161591616016161161621616316164161651616616167161681616916170161711617216173161741617516176161771617816179161801618116182161831618416185161861618716188161891619016191161921619316194161951619616197161981619916200162011620216203162041620516206162071620816209162101621116212162131621416215162161621716218162191622016221162221622316224162251622616227162281622916230162311623216233162341623516236162371623816239162401624116242162431624416245162461624716248162491625016251162521625316254162551625616257162581625916260162611626216263162641626516266162671626816269162701627116272162731627416275162761627716278162791628016281162821628316284162851628616287162881628916290162911629216293162941629516296162971629816299163001630116302163031630416305163061630716308163091631016311163121631316314163151631616317163181631916320163211632216323163241632516326163271632816329163301633116332163331633416335163361633716338163391634016341163421634316344163451634616347163481634916350163511635216353163541635516356163571635816359163601636116362163631636416365163661636716368163691637016371163721637316374163751637616377163781637916380163811638216383163841638516386163871638816389163901639116392163931639416395163961639716398163991640016401164021640316404164051640616407164081640916410164111641216413164141641516416164171641816419164201642116422164231642416425164261642716428164291643016431164321643316434164351643616437164381643916440164411644216443164441644516446164471644816449164501645116452164531645416455164561645716458164591646016461164621646316464164651646616467164681646916470164711647216473164741647516476164771647816479164801648116482164831648416485164861648716488164891649016491164921649316494164951649616497164981649916500165011650216503165041650516506165071650816509165101651116512165131651416515165161651716518165191652016521165221652316524165251652616527165281652916530165311653216533165341653516536165371653816539165401654116542165431654416545165461654716548165491655016551165521655316554165551655616557165581655916560165611656216563165641656516566165671656816569165701657116572165731657416575165761657716578165791658016581165821658316584165851658616587165881658916590165911659216593165941659516596165971659816599166001660116602166031660416605166061660716608166091661016611166121661316614166151661616617166181661916620166211662216623166241662516626166271662816629166301663116632166331663416635166361663716638166391664016641166421664316644166451664616647166481664916650166511665216653166541665516656166571665816659166601666116662166631666416665166661666716668166691667016671166721667316674166751667616677166781667916680166811668216683166841668516686166871668816689166901669116692166931669416695166961669716698166991670016701167021670316704167051670616707167081670916710167111671216713167141671516716167171671816719167201672116722167231672416725167261672716728167291673016731167321673316734167351673616737167381673916740167411674216743167441674516746167471674816749167501675116752167531675416755167561675716758167591676016761167621676316764167651676616767167681676916770167711677216773167741677516776167771677816779167801678116782167831678416785167861678716788167891679016791167921679316794167951679616797167981679916800168011680216803168041680516806168071680816809168101681116812168131681416815168161681716818168191682016821168221682316824168251682616827168281682916830168311683216833168341683516836168371683816839168401684116842168431684416845168461684716848168491685016851168521685316854168551685616857168581685916860168611686216863168641686516866168671686816869168701687116872168731687416875168761687716878168791688016881168821688316884168851688616887168881688916890168911689216893168941689516896168971689816899169001690116902169031690416905169061690716908169091691016911169121691316914169151691616917169181691916920169211692216923169241692516926169271692816929169301693116932169331693416935169361693716938169391694016941169421694316944169451694616947169481694916950169511695216953169541695516956169571695816959169601696116962169631696416965169661696716968169691697016971169721697316974169751697616977169781697916980169811698216983169841698516986169871698816989169901699116992169931699416995169961699716998169991700017001170021700317004170051700617007170081700917010170111701217013170141701517016170171701817019170201702117022170231702417025170261702717028170291703017031170321703317034170351703617037170381703917040170411704217043170441704517046170471704817049170501705117052170531705417055170561705717058170591706017061170621706317064170651706617067170681706917070170711707217073170741707517076170771707817079170801708117082170831708417085170861708717088170891709017091170921709317094170951709617097170981709917100171011710217103171041710517106171071710817109171101711117112171131711417115171161711717118171191712017121171221712317124171251712617127171281712917130171311713217133171341713517136171371713817139171401714117142171431714417145171461714717148171491715017151171521715317154171551715617157171581715917160171611716217163171641716517166171671716817169171701717117172171731717417175171761717717178171791718017181171821718317184171851718617187171881718917190171911719217193171941719517196171971719817199172001720117202172031720417205172061720717208172091721017211172121721317214172151721617217172181721917220172211722217223172241722517226172271722817229172301723117232172331723417235172361723717238172391724017241172421724317244172451724617247172481724917250172511725217253172541725517256172571725817259172601726117262172631726417265172661726717268172691727017271172721727317274172751727617277172781727917280172811728217283172841728517286172871728817289172901729117292172931729417295172961729717298172991730017301173021730317304173051730617307173081730917310173111731217313173141731517316173171731817319173201732117322173231732417325173261732717328173291733017331173321733317334173351733617337173381733917340173411734217343173441734517346173471734817349173501735117352173531735417355173561735717358173591736017361173621736317364173651736617367173681736917370173711737217373173741737517376173771737817379173801738117382173831738417385173861738717388173891739017391173921739317394173951739617397173981739917400174011740217403174041740517406174071740817409174101741117412174131741417415174161741717418174191742017421174221742317424174251742617427174281742917430174311743217433174341743517436174371743817439174401744117442174431744417445174461744717448174491745017451174521745317454174551745617457174581745917460174611746217463174641746517466174671746817469174701747117472174731747417475174761747717478174791748017481174821748317484174851748617487174881748917490174911749217493174941749517496174971749817499175001750117502175031750417505175061750717508175091751017511175121751317514175151751617517175181751917520175211752217523175241752517526175271752817529175301753117532175331753417535175361753717538175391754017541175421754317544175451754617547175481754917550175511755217553175541755517556175571755817559175601756117562175631756417565175661756717568175691757017571175721757317574175751757617577175781757917580175811758217583175841758517586175871758817589175901759117592175931759417595175961759717598175991760017601176021760317604176051760617607176081760917610176111761217613176141761517616176171761817619176201762117622176231762417625176261762717628176291763017631176321763317634176351763617637176381763917640176411764217643176441764517646176471764817649176501765117652176531765417655176561765717658176591766017661176621766317664176651766617667176681766917670176711767217673176741767517676176771767817679176801768117682176831768417685176861768717688176891769017691176921769317694176951769617697176981769917700177011770217703177041770517706177071770817709177101771117712177131771417715177161771717718177191772017721177221772317724177251772617727177281772917730177311773217733177341773517736177371773817739177401774117742177431774417745177461774717748177491775017751177521775317754177551775617757177581775917760177611776217763177641776517766177671776817769177701777117772177731777417775177761777717778177791778017781177821778317784177851778617787177881778917790177911779217793177941779517796177971779817799178001780117802178031780417805178061780717808178091781017811178121781317814178151781617817178181781917820178211782217823178241782517826178271782817829178301783117832178331783417835178361783717838178391784017841178421784317844178451784617847178481784917850178511785217853178541785517856178571785817859178601786117862178631786417865178661786717868178691787017871178721787317874178751787617877178781787917880178811788217883178841788517886178871788817889178901789117892178931789417895178961789717898178991790017901179021790317904179051790617907179081790917910179111791217913179141791517916179171791817919179201792117922179231792417925179261792717928179291793017931179321793317934179351793617937179381793917940179411794217943179441794517946179471794817949179501795117952179531795417955179561795717958179591796017961179621796317964179651796617967179681796917970179711797217973179741797517976179771797817979179801798117982179831798417985179861798717988179891799017991179921799317994179951799617997179981799918000180011800218003180041800518006180071800818009180101801118012180131801418015180161801718018180191802018021180221802318024180251802618027180281802918030180311803218033180341803518036180371803818039180401804118042180431804418045180461804718048180491805018051180521805318054180551805618057180581805918060180611806218063180641806518066180671806818069180701807118072180731807418075180761807718078180791808018081180821808318084180851808618087180881808918090180911809218093180941809518096180971809818099181001810118102181031810418105181061810718108181091811018111181121811318114181151811618117181181811918120181211812218123181241812518126181271812818129181301813118132181331813418135181361813718138181391814018141181421814318144181451814618147181481814918150181511815218153181541815518156181571815818159181601816118162181631816418165181661816718168181691817018171181721817318174181751817618177181781817918180181811818218183181841818518186181871818818189181901819118192181931819418195181961819718198181991820018201182021820318204182051820618207182081820918210182111821218213182141821518216182171821818219182201822118222182231822418225182261822718228182291823018231182321823318234182351823618237182381823918240182411824218243182441824518246182471824818249182501825118252182531825418255182561825718258182591826018261182621826318264182651826618267182681826918270182711827218273182741827518276182771827818279182801828118282182831828418285182861828718288182891829018291182921829318294182951829618297182981829918300183011830218303183041830518306183071830818309183101831118312183131831418315183161831718318183191832018321183221832318324183251832618327183281832918330183311833218333183341833518336183371833818339183401834118342183431834418345183461834718348183491835018351183521835318354183551835618357183581835918360183611836218363183641836518366183671836818369183701837118372183731837418375183761837718378183791838018381183821838318384183851838618387183881838918390183911839218393183941839518396183971839818399184001840118402184031840418405184061840718408184091841018411184121841318414184151841618417184181841918420184211842218423184241842518426184271842818429184301843118432184331843418435184361843718438184391844018441184421844318444184451844618447184481844918450184511845218453184541845518456184571845818459184601846118462184631846418465184661846718468184691847018471184721847318474184751847618477184781847918480184811848218483184841848518486184871848818489184901849118492184931849418495184961849718498184991850018501185021850318504185051850618507185081850918510185111851218513185141851518516185171851818519185201852118522185231852418525185261852718528185291853018531185321853318534185351853618537185381853918540185411854218543185441854518546185471854818549185501855118552185531855418555185561855718558185591856018561185621856318564185651856618567185681856918570185711857218573185741857518576185771857818579185801858118582185831858418585185861858718588185891859018591185921859318594185951859618597185981859918600186011860218603186041860518606186071860818609186101861118612186131861418615186161861718618186191862018621186221862318624186251862618627186281862918630186311863218633186341863518636186371863818639186401864118642186431864418645186461864718648186491865018651186521865318654186551865618657186581865918660186611866218663186641866518666186671866818669186701867118672186731867418675186761867718678186791868018681186821868318684186851868618687186881868918690186911869218693186941869518696186971869818699187001870118702187031870418705187061870718708187091871018711187121871318714187151871618717187181871918720187211872218723187241872518726187271872818729187301873118732187331873418735187361873718738187391874018741187421874318744187451874618747187481874918750187511875218753187541875518756187571875818759187601876118762187631876418765187661876718768187691877018771187721877318774187751877618777187781877918780187811878218783187841878518786187871878818789187901879118792187931879418795187961879718798187991880018801188021880318804188051880618807188081880918810188111881218813188141881518816188171881818819188201882118822188231882418825188261882718828188291883018831188321883318834188351883618837188381883918840188411884218843188441884518846188471884818849188501885118852188531885418855188561885718858188591886018861188621886318864188651886618867188681886918870188711887218873188741887518876188771887818879188801888118882188831888418885188861888718888188891889018891188921889318894188951889618897188981889918900189011890218903189041890518906189071890818909189101891118912189131891418915189161891718918189191892018921189221892318924189251892618927189281892918930189311893218933189341893518936189371893818939189401894118942189431894418945189461894718948189491895018951189521895318954189551895618957189581895918960189611896218963189641896518966189671896818969189701897118972189731897418975189761897718978189791898018981189821898318984189851898618987189881898918990189911899218993189941899518996189971899818999190001900119002190031900419005190061900719008190091901019011190121901319014190151901619017190181901919020190211902219023190241902519026190271902819029190301903119032190331903419035190361903719038190391904019041190421904319044190451904619047190481904919050190511905219053190541905519056190571905819059190601906119062190631906419065190661906719068190691907019071190721907319074190751907619077190781907919080190811908219083190841908519086190871908819089190901909119092190931909419095190961909719098190991910019101191021910319104191051910619107191081910919110191111911219113191141911519116191171911819119191201912119122191231912419125191261912719128191291913019131191321913319134191351913619137191381913919140191411914219143191441914519146191471914819149191501915119152191531915419155191561915719158191591916019161191621916319164191651916619167191681916919170191711917219173191741917519176191771917819179191801918119182191831918419185191861918719188191891919019191191921919319194191951919619197191981919919200192011920219203192041920519206192071920819209192101921119212192131921419215192161921719218192191922019221192221922319224192251922619227192281922919230192311923219233192341923519236192371923819239192401924119242192431924419245192461924719248192491925019251192521925319254192551925619257192581925919260192611926219263192641926519266192671926819269192701927119272192731927419275192761927719278192791928019281192821928319284192851928619287192881928919290192911929219293192941929519296192971929819299193001930119302193031930419305193061930719308193091931019311193121931319314193151931619317193181931919320193211932219323193241932519326193271932819329193301933119332193331933419335193361933719338193391934019341193421934319344193451934619347193481934919350193511935219353193541935519356193571935819359193601936119362193631936419365193661936719368193691937019371193721937319374193751937619377193781937919380193811938219383193841938519386193871938819389193901939119392193931939419395193961939719398193991940019401194021940319404194051940619407194081940919410194111941219413194141941519416194171941819419194201942119422194231942419425194261942719428194291943019431194321943319434194351943619437194381943919440194411944219443194441944519446194471944819449194501945119452194531945419455194561945719458194591946019461194621946319464194651946619467194681946919470194711947219473194741947519476194771947819479194801948119482194831948419485194861948719488194891949019491194921949319494194951949619497194981949919500195011950219503195041950519506195071950819509195101951119512195131951419515195161951719518195191952019521195221952319524195251952619527195281952919530195311953219533195341953519536195371953819539195401954119542195431954419545195461954719548195491955019551195521955319554195551955619557195581955919560195611956219563195641956519566195671956819569195701957119572195731957419575195761957719578195791958019581195821958319584195851958619587195881958919590195911959219593195941959519596195971959819599196001960119602196031960419605196061960719608196091961019611196121961319614196151961619617196181961919620196211962219623196241962519626196271962819629196301963119632196331963419635196361963719638196391964019641196421964319644196451964619647196481964919650196511965219653196541965519656196571965819659196601966119662196631966419665196661966719668196691967019671196721967319674196751967619677196781967919680196811968219683196841968519686196871968819689196901969119692196931969419695196961969719698196991970019701197021970319704197051970619707197081970919710197111971219713197141971519716197171971819719197201972119722197231972419725197261972719728197291973019731197321973319734197351973619737197381973919740197411974219743197441974519746197471974819749197501975119752197531975419755197561975719758197591976019761197621976319764197651976619767197681976919770197711977219773197741977519776197771977819779197801978119782197831978419785197861978719788197891979019791197921979319794197951979619797197981979919800198011980219803198041980519806198071980819809198101981119812198131981419815198161981719818198191982019821198221982319824198251982619827198281982919830198311983219833198341983519836198371983819839198401984119842198431984419845198461984719848198491985019851198521985319854198551985619857198581985919860198611986219863198641986519866198671986819869198701987119872198731987419875198761987719878198791988019881198821988319884198851988619887198881988919890198911989219893198941989519896198971989819899199001990119902199031990419905199061990719908199091991019911199121991319914199151991619917199181991919920199211992219923199241992519926199271992819929199301993119932199331993419935199361993719938199391994019941199421994319944199451994619947199481994919950199511995219953199541995519956199571995819959199601996119962199631996419965199661996719968199691997019971199721997319974199751997619977199781997919980199811998219983199841998519986199871998819989199901999119992199931999419995199961999719998199992000020001200022000320004200052000620007200082000920010200112001220013200142001520016200172001820019200202002120022200232002420025200262002720028200292003020031200322003320034200352003620037200382003920040200412004220043200442004520046200472004820049200502005120052200532005420055200562005720058200592006020061200622006320064200652006620067200682006920070200712007220073200742007520076200772007820079200802008120082200832008420085200862008720088200892009020091200922009320094200952009620097200982009920100201012010220103201042010520106201072010820109201102011120112201132011420115201162011720118201192012020121201222012320124201252012620127201282012920130201312013220133201342013520136201372013820139201402014120142201432014420145201462014720148201492015020151201522015320154201552015620157201582015920160201612016220163201642016520166201672016820169201702017120172201732017420175201762017720178201792018020181201822018320184201852018620187201882018920190201912019220193201942019520196201972019820199202002020120202202032020420205202062020720208202092021020211202122021320214202152021620217202182021920220202212022220223202242022520226202272022820229202302023120232202332023420235202362023720238202392024020241202422024320244202452024620247202482024920250202512025220253202542025520256202572025820259202602026120262202632026420265202662026720268202692027020271202722027320274202752027620277202782027920280202812028220283202842028520286202872028820289202902029120292202932029420295202962029720298202992030020301203022030320304203052030620307203082030920310203112031220313203142031520316203172031820319203202032120322203232032420325203262032720328203292033020331203322033320334203352033620337203382033920340203412034220343203442034520346203472034820349203502035120352203532035420355203562035720358203592036020361203622036320364203652036620367203682036920370203712037220373203742037520376203772037820379203802038120382203832038420385203862038720388203892039020391203922039320394203952039620397203982039920400204012040220403204042040520406204072040820409204102041120412204132041420415204162041720418204192042020421204222042320424204252042620427204282042920430204312043220433204342043520436204372043820439204402044120442204432044420445204462044720448204492045020451204522045320454204552045620457204582045920460204612046220463204642046520466204672046820469204702047120472204732047420475204762047720478204792048020481204822048320484204852048620487204882048920490204912049220493204942049520496204972049820499205002050120502205032050420505205062050720508205092051020511205122051320514205152051620517205182051920520205212052220523205242052520526205272052820529205302053120532205332053420535205362053720538205392054020541205422054320544205452054620547205482054920550205512055220553205542055520556205572055820559205602056120562205632056420565205662056720568205692057020571205722057320574205752057620577205782057920580205812058220583205842058520586205872058820589205902059120592205932059420595205962059720598205992060020601206022060320604206052060620607206082060920610206112061220613206142061520616206172061820619206202062120622206232062420625206262062720628206292063020631206322063320634206352063620637206382063920640206412064220643206442064520646206472064820649206502065120652206532065420655206562065720658206592066020661206622066320664206652066620667206682066920670206712067220673206742067520676206772067820679206802068120682206832068420685206862068720688206892069020691206922069320694206952069620697206982069920700207012070220703207042070520706207072070820709207102071120712207132071420715207162071720718207192072020721207222072320724207252072620727207282072920730207312073220733207342073520736207372073820739207402074120742207432074420745207462074720748207492075020751207522075320754207552075620757207582075920760207612076220763207642076520766207672076820769207702077120772207732077420775207762077720778207792078020781207822078320784207852078620787207882078920790207912079220793207942079520796207972079820799208002080120802208032080420805208062080720808208092081020811208122081320814208152081620817208182081920820208212082220823208242082520826208272082820829208302083120832208332083420835208362083720838208392084020841208422084320844208452084620847208482084920850208512085220853208542085520856208572085820859208602086120862208632086420865208662086720868208692087020871208722087320874208752087620877208782087920880208812088220883208842088520886208872088820889208902089120892208932089420895208962089720898208992090020901209022090320904209052090620907209082090920910209112091220913209142091520916209172091820919209202092120922209232092420925209262092720928209292093020931209322093320934209352093620937209382093920940209412094220943209442094520946209472094820949209502095120952209532095420955209562095720958209592096020961209622096320964209652096620967209682096920970209712097220973209742097520976209772097820979209802098120982209832098420985209862098720988209892099020991209922099320994209952099620997209982099921000210012100221003210042100521006210072100821009210102101121012210132101421015210162101721018210192102021021210222102321024210252102621027210282102921030210312103221033210342103521036210372103821039210402104121042210432104421045210462104721048210492105021051210522105321054210552105621057210582105921060210612106221063210642106521066210672106821069210702107121072210732107421075210762107721078210792108021081210822108321084210852108621087210882108921090210912109221093210942109521096210972109821099211002110121102211032110421105211062110721108211092111021111211122111321114211152111621117211182111921120211212112221123211242112521126211272112821129211302113121132211332113421135211362113721138211392114021141211422114321144211452114621147211482114921150211512115221153211542115521156211572115821159211602116121162211632116421165211662116721168211692117021171211722117321174211752117621177211782117921180211812118221183211842118521186211872118821189211902119121192211932119421195211962119721198211992120021201212022120321204212052120621207212082120921210212112121221213212142121521216212172121821219212202122121222212232122421225212262122721228212292123021231212322123321234212352123621237212382123921240212412124221243212442124521246212472124821249212502125121252212532125421255212562125721258212592126021261212622126321264212652126621267212682126921270212712127221273212742127521276212772127821279212802128121282212832128421285212862128721288212892129021291212922129321294212952129621297212982129921300213012130221303213042130521306213072130821309213102131121312213132131421315213162131721318213192132021321213222132321324213252132621327213282132921330213312133221333213342133521336213372133821339213402134121342213432134421345213462134721348213492135021351213522135321354213552135621357213582135921360213612136221363213642136521366213672136821369213702137121372213732137421375213762137721378213792138021381213822138321384213852138621387213882138921390213912139221393213942139521396213972139821399214002140121402214032140421405214062140721408214092141021411214122141321414214152141621417214182141921420214212142221423214242142521426214272142821429214302143121432214332143421435214362143721438214392144021441214422144321444214452144621447214482144921450214512145221453214542145521456214572145821459214602146121462214632146421465214662146721468214692147021471214722147321474214752147621477214782147921480214812148221483214842148521486214872148821489214902149121492214932149421495214962149721498214992150021501215022150321504215052150621507215082150921510215112151221513215142151521516215172151821519215202152121522215232152421525215262152721528215292153021531215322153321534215352153621537215382153921540215412154221543215442154521546215472154821549215502155121552215532155421555215562155721558215592156021561215622156321564215652156621567215682156921570215712157221573215742157521576215772157821579215802158121582215832158421585215862158721588215892159021591215922159321594215952159621597215982159921600216012160221603216042160521606216072160821609216102161121612216132161421615216162161721618216192162021621216222162321624216252162621627216282162921630216312163221633216342163521636216372163821639216402164121642216432164421645216462164721648216492165021651216522165321654216552165621657216582165921660216612166221663216642166521666216672166821669216702167121672216732167421675216762167721678216792168021681216822168321684216852168621687216882168921690216912169221693216942169521696216972169821699217002170121702217032170421705217062170721708217092171021711217122171321714217152171621717217182171921720217212172221723217242172521726217272172821729217302173121732217332173421735217362173721738217392174021741217422174321744217452174621747217482174921750217512175221753217542175521756217572175821759217602176121762217632176421765217662176721768217692177021771217722177321774217752177621777217782177921780217812178221783217842178521786217872178821789217902179121792217932179421795217962179721798217992180021801218022180321804218052180621807218082180921810218112181221813218142181521816218172181821819218202182121822218232182421825218262182721828218292183021831218322183321834218352183621837218382183921840218412184221843218442184521846218472184821849218502185121852218532185421855218562185721858218592186021861218622186321864218652186621867218682186921870218712187221873218742187521876218772187821879218802188121882218832188421885218862188721888218892189021891218922189321894218952189621897218982189921900219012190221903219042190521906219072190821909219102191121912219132191421915219162191721918219192192021921219222192321924219252192621927219282192921930219312193221933219342193521936219372193821939219402194121942219432194421945219462194721948219492195021951219522195321954219552195621957219582195921960219612196221963219642196521966219672196821969219702197121972219732197421975219762197721978219792198021981219822198321984219852198621987219882198921990219912199221993219942199521996219972199821999220002200122002220032200422005220062200722008220092201022011220122201322014220152201622017220182201922020220212202222023220242202522026220272202822029220302203122032220332203422035220362203722038220392204022041220422204322044220452204622047220482204922050220512205222053220542205522056220572205822059220602206122062220632206422065220662206722068220692207022071220722207322074220752207622077220782207922080220812208222083220842208522086220872208822089220902209122092220932209422095220962209722098220992210022101221022210322104221052210622107221082210922110221112211222113221142211522116221172211822119221202212122122221232212422125221262212722128221292213022131221322213322134221352213622137221382213922140221412214222143221442214522146221472214822149221502215122152221532215422155221562215722158221592216022161221622216322164221652216622167221682216922170221712217222173221742217522176221772217822179221802218122182221832218422185221862218722188221892219022191221922219322194221952219622197221982219922200222012220222203222042220522206222072220822209222102221122212222132221422215222162221722218222192222022221222222222322224222252222622227222282222922230222312223222233222342223522236222372223822239222402224122242222432224422245222462224722248222492225022251222522225322254222552225622257222582225922260222612226222263222642226522266222672226822269222702227122272222732227422275222762227722278222792228022281222822228322284222852228622287222882228922290222912229222293222942229522296222972229822299223002230122302223032230422305223062230722308223092231022311223122231322314223152231622317223182231922320223212232222323223242232522326223272232822329223302233122332223332233422335223362233722338223392234022341223422234322344223452234622347223482234922350223512235222353223542235522356223572235822359223602236122362223632236422365223662236722368223692237022371223722237322374223752237622377223782237922380223812238222383223842238522386223872238822389223902239122392223932239422395223962239722398223992240022401224022240322404224052240622407224082240922410224112241222413224142241522416224172241822419224202242122422224232242422425224262242722428224292243022431224322243322434224352243622437224382243922440224412244222443224442244522446224472244822449224502245122452224532245422455224562245722458224592246022461224622246322464224652246622467224682246922470224712247222473224742247522476224772247822479224802248122482224832248422485224862248722488224892249022491224922249322494224952249622497224982249922500225012250222503225042250522506225072250822509225102251122512225132251422515225162251722518225192252022521225222252322524225252252622527225282252922530225312253222533225342253522536225372253822539225402254122542225432254422545225462254722548225492255022551225522255322554225552255622557225582255922560225612256222563225642256522566225672256822569225702257122572225732257422575225762257722578225792258022581225822258322584225852258622587225882258922590225912259222593225942259522596225972259822599226002260122602226032260422605226062260722608226092261022611226122261322614226152261622617226182261922620226212262222623226242262522626226272262822629226302263122632226332263422635226362263722638226392264022641226422264322644226452264622647226482264922650226512265222653226542265522656226572265822659226602266122662226632266422665226662266722668226692267022671226722267322674226752267622677226782267922680226812268222683226842268522686226872268822689226902269122692226932269422695226962269722698226992270022701227022270322704227052270622707227082270922710227112271222713227142271522716227172271822719227202272122722227232272422725227262272722728227292273022731227322273322734227352273622737227382273922740227412274222743227442274522746227472274822749227502275122752227532275422755227562275722758227592276022761227622276322764227652276622767227682276922770227712277222773227742277522776227772277822779227802278122782227832278422785227862278722788227892279022791227922279322794227952279622797227982279922800228012280222803228042280522806228072280822809228102281122812228132281422815228162281722818228192282022821228222282322824228252282622827228282282922830228312283222833228342283522836228372283822839228402284122842228432284422845228462284722848228492285022851228522285322854228552285622857228582285922860228612286222863228642286522866228672286822869228702287122872228732287422875228762287722878228792288022881228822288322884228852288622887228882288922890228912289222893228942289522896228972289822899229002290122902229032290422905229062290722908229092291022911229122291322914229152291622917229182291922920229212292222923229242292522926229272292822929229302293122932229332293422935229362293722938229392294022941229422294322944229452294622947229482294922950229512295222953229542295522956229572295822959229602296122962229632296422965229662296722968229692297022971229722297322974229752297622977229782297922980229812298222983229842298522986229872298822989229902299122992229932299422995229962299722998229992300023001230022300323004230052300623007230082300923010230112301223013230142301523016230172301823019230202302123022230232302423025230262302723028230292303023031230322303323034230352303623037230382303923040230412304223043230442304523046230472304823049230502305123052230532305423055230562305723058230592306023061230622306323064230652306623067230682306923070230712307223073230742307523076230772307823079230802308123082230832308423085230862308723088230892309023091230922309323094230952309623097230982309923100231012310223103231042310523106231072310823109231102311123112231132311423115231162311723118231192312023121231222312323124231252312623127231282312923130231312313223133231342313523136231372313823139231402314123142231432314423145231462314723148231492315023151231522315323154231552315623157231582315923160231612316223163231642316523166231672316823169231702317123172231732317423175231762317723178231792318023181231822318323184231852318623187231882318923190231912319223193231942319523196231972319823199232002320123202232032320423205232062320723208232092321023211232122321323214232152321623217232182321923220232212322223223232242322523226232272322823229232302323123232232332323423235232362323723238232392324023241232422324323244232452324623247232482324923250232512325223253232542325523256232572325823259232602326123262232632326423265232662326723268232692327023271232722327323274232752327623277232782327923280232812328223283232842328523286232872328823289232902329123292232932329423295232962329723298232992330023301233022330323304233052330623307233082330923310233112331223313233142331523316233172331823319233202332123322233232332423325233262332723328233292333023331233322333323334233352333623337233382333923340233412334223343233442334523346233472334823349233502335123352233532335423355233562335723358233592336023361233622336323364233652336623367233682336923370233712337223373233742337523376233772337823379233802338123382233832338423385233862338723388233892339023391233922339323394233952339623397233982339923400234012340223403234042340523406234072340823409234102341123412234132341423415234162341723418234192342023421234222342323424234252342623427234282342923430234312343223433234342343523436234372343823439234402344123442234432344423445234462344723448234492345023451234522345323454234552345623457234582345923460234612346223463234642346523466234672346823469234702347123472234732347423475234762347723478234792348023481234822348323484234852348623487234882348923490234912349223493234942349523496234972349823499235002350123502235032350423505235062350723508235092351023511235122351323514235152351623517235182351923520235212352223523235242352523526235272352823529235302353123532235332353423535235362353723538235392354023541235422354323544235452354623547235482354923550235512355223553235542355523556235572355823559235602356123562235632356423565235662356723568235692357023571235722357323574235752357623577235782357923580235812358223583235842358523586235872358823589235902359123592235932359423595235962359723598235992360023601236022360323604236052360623607236082360923610236112361223613236142361523616236172361823619236202362123622236232362423625236262362723628236292363023631236322363323634236352363623637236382363923640236412364223643236442364523646236472364823649236502365123652236532365423655236562365723658236592366023661236622366323664236652366623667236682366923670236712367223673236742367523676236772367823679236802368123682236832368423685236862368723688236892369023691236922369323694236952369623697236982369923700237012370223703237042370523706237072370823709237102371123712237132371423715237162371723718237192372023721237222372323724237252372623727237282372923730237312373223733237342373523736237372373823739237402374123742237432374423745237462374723748237492375023751237522375323754237552375623757237582375923760237612376223763237642376523766237672376823769237702377123772237732377423775237762377723778237792378023781237822378323784237852378623787237882378923790237912379223793237942379523796237972379823799238002380123802238032380423805238062380723808238092381023811238122381323814238152381623817238182381923820238212382223823238242382523826238272382823829238302383123832238332383423835238362383723838238392384023841238422384323844238452384623847238482384923850238512385223853238542385523856238572385823859238602386123862238632386423865238662386723868238692387023871238722387323874238752387623877238782387923880238812388223883238842388523886238872388823889238902389123892238932389423895238962389723898238992390023901239022390323904239052390623907239082390923910239112391223913239142391523916239172391823919239202392123922239232392423925239262392723928239292393023931239322393323934239352393623937239382393923940239412394223943239442394523946239472394823949239502395123952239532395423955239562395723958239592396023961239622396323964239652396623967239682396923970239712397223973239742397523976239772397823979239802398123982239832398423985239862398723988239892399023991239922399323994239952399623997239982399924000240012400224003240042400524006240072400824009240102401124012240132401424015240162401724018240192402024021240222402324024240252402624027240282402924030240312403224033240342403524036240372403824039240402404124042240432404424045240462404724048240492405024051240522405324054240552405624057240582405924060240612406224063240642406524066240672406824069240702407124072240732407424075240762407724078240792408024081240822408324084240852408624087240882408924090240912409224093240942409524096240972409824099241002410124102241032410424105241062410724108241092411024111241122411324114241152411624117241182411924120241212412224123241242412524126241272412824129241302413124132241332413424135241362413724138241392414024141241422414324144241452414624147241482414924150241512415224153241542415524156241572415824159241602416124162241632416424165241662416724168241692417024171241722417324174241752417624177241782417924180241812418224183241842418524186241872418824189241902419124192241932419424195241962419724198241992420024201242022420324204242052420624207242082420924210242112421224213242142421524216242172421824219242202422124222242232422424225242262422724228242292423024231242322423324234242352423624237242382423924240242412424224243242442424524246242472424824249242502425124252242532425424255242562425724258242592426024261242622426324264242652426624267242682426924270242712427224273242742427524276242772427824279242802428124282242832428424285242862428724288242892429024291242922429324294242952429624297242982429924300243012430224303243042430524306243072430824309243102431124312243132431424315243162431724318243192432024321243222432324324243252432624327243282432924330243312433224333243342433524336243372433824339243402434124342243432434424345243462434724348243492435024351243522435324354243552435624357243582435924360243612436224363243642436524366243672436824369243702437124372243732437424375243762437724378243792438024381243822438324384243852438624387243882438924390243912439224393243942439524396243972439824399244002440124402244032440424405244062440724408244092441024411244122441324414244152441624417244182441924420244212442224423244242442524426244272442824429244302443124432244332443424435244362443724438244392444024441244422444324444244452444624447244482444924450244512445224453244542445524456244572445824459244602446124462244632446424465244662446724468244692447024471244722447324474244752447624477244782447924480244812448224483244842448524486244872448824489244902449124492244932449424495244962449724498244992450024501245022450324504245052450624507245082450924510245112451224513245142451524516245172451824519245202452124522245232452424525245262452724528245292453024531245322453324534245352453624537245382453924540245412454224543245442454524546245472454824549245502455124552245532455424555245562455724558245592456024561245622456324564245652456624567245682456924570245712457224573245742457524576245772457824579245802458124582245832458424585245862458724588245892459024591245922459324594245952459624597245982459924600246012460224603246042460524606246072460824609246102461124612246132461424615246162461724618246192462024621246222462324624246252462624627246282462924630246312463224633246342463524636246372463824639246402464124642246432464424645246462464724648246492465024651246522465324654246552465624657246582465924660246612466224663246642466524666246672466824669246702467124672246732467424675246762467724678246792468024681246822468324684246852468624687246882468924690246912469224693246942469524696246972469824699247002470124702247032470424705247062470724708247092471024711247122471324714247152471624717247182471924720247212472224723247242472524726247272472824729247302473124732247332473424735247362473724738247392474024741247422474324744247452474624747247482474924750247512475224753247542475524756247572475824759247602476124762247632476424765247662476724768247692477024771247722477324774247752477624777247782477924780247812478224783247842478524786247872478824789247902479124792247932479424795247962479724798247992480024801248022480324804248052480624807248082480924810248112481224813248142481524816248172481824819248202482124822248232482424825248262482724828248292483024831248322483324834248352483624837248382483924840248412484224843248442484524846248472484824849248502485124852248532485424855248562485724858248592486024861248622486324864248652486624867248682486924870248712487224873248742487524876248772487824879248802488124882248832488424885248862488724888248892489024891248922489324894248952489624897248982489924900249012490224903249042490524906249072490824909249102491124912249132491424915249162491724918249192492024921249222492324924249252492624927249282492924930249312493224933249342493524936249372493824939249402494124942249432494424945249462494724948249492495024951249522495324954249552495624957249582495924960249612496224963249642496524966249672496824969249702497124972249732497424975249762497724978249792498024981249822498324984249852498624987249882498924990249912499224993249942499524996249972499824999250002500125002250032500425005250062500725008250092501025011250122501325014250152501625017250182501925020250212502225023250242502525026250272502825029250302503125032250332503425035250362503725038250392504025041250422504325044250452504625047250482504925050250512505225053250542505525056250572505825059250602506125062250632506425065250662506725068250692507025071250722507325074250752507625077250782507925080250812508225083250842508525086250872508825089250902509125092250932509425095250962509725098250992510025101251022510325104251052510625107251082510925110251112511225113251142511525116251172511825119251202512125122251232512425125251262512725128251292513025131251322513325134251352513625137251382513925140251412514225143251442514525146251472514825149251502515125152251532515425155251562515725158251592516025161251622516325164251652516625167251682516925170251712517225173251742517525176251772517825179251802518125182251832518425185251862518725188251892519025191251922519325194251952519625197251982519925200252012520225203252042520525206252072520825209252102521125212252132521425215252162521725218252192522025221252222522325224252252522625227252282522925230252312523225233252342523525236252372523825239252402524125242252432524425245252462524725248252492525025251252522525325254252552525625257252582525925260252612526225263252642526525266252672526825269252702527125272252732527425275252762527725278252792528025281252822528325284252852528625287252882528925290252912529225293252942529525296252972529825299253002530125302253032530425305253062530725308253092531025311253122531325314253152531625317253182531925320253212532225323253242532525326253272532825329253302533125332253332533425335253362533725338253392534025341253422534325344253452534625347253482534925350253512535225353253542535525356253572535825359253602536125362253632536425365253662536725368253692537025371253722537325374253752537625377253782537925380253812538225383253842538525386253872538825389253902539125392253932539425395253962539725398253992540025401254022540325404254052540625407254082540925410254112541225413254142541525416254172541825419254202542125422254232542425425254262542725428254292543025431254322543325434254352543625437254382543925440254412544225443254442544525446254472544825449254502545125452254532545425455254562545725458254592546025461254622546325464254652546625467254682546925470254712547225473254742547525476254772547825479254802548125482254832548425485254862548725488254892549025491254922549325494254952549625497254982549925500255012550225503255042550525506255072550825509255102551125512255132551425515255162551725518255192552025521255222552325524255252552625527255282552925530255312553225533255342553525536255372553825539255402554125542255432554425545255462554725548255492555025551255522555325554255552555625557255582555925560255612556225563255642556525566255672556825569255702557125572255732557425575255762557725578255792558025581255822558325584255852558625587255882558925590255912559225593255942559525596255972559825599256002560125602256032560425605256062560725608256092561025611256122561325614256152561625617256182561925620256212562225623256242562525626256272562825629256302563125632256332563425635256362563725638256392564025641256422564325644256452564625647256482564925650256512565225653256542565525656256572565825659256602566125662256632566425665256662566725668256692567025671256722567325674256752567625677256782567925680256812568225683256842568525686256872568825689256902569125692256932569425695256962569725698256992570025701257022570325704257052570625707257082570925710257112571225713257142571525716257172571825719257202572125722257232572425725257262572725728257292573025731257322573325734257352573625737257382573925740257412574225743257442574525746257472574825749257502575125752257532575425755257562575725758257592576025761257622576325764257652576625767257682576925770257712577225773257742577525776257772577825779257802578125782257832578425785257862578725788257892579025791257922579325794257952579625797257982579925800258012580225803258042580525806258072580825809258102581125812258132581425815258162581725818258192582025821258222582325824258252582625827258282582925830258312583225833258342583525836258372583825839258402584125842258432584425845258462584725848258492585025851258522585325854258552585625857258582585925860258612586225863258642586525866258672586825869258702587125872258732587425875258762587725878258792588025881258822588325884258852588625887258882588925890258912589225893258942589525896258972589825899259002590125902259032590425905259062590725908259092591025911259122591325914259152591625917259182591925920259212592225923259242592525926259272592825929259302593125932259332593425935259362593725938259392594025941259422594325944259452594625947259482594925950259512595225953259542595525956259572595825959259602596125962259632596425965259662596725968259692597025971259722597325974259752597625977259782597925980259812598225983259842598525986259872598825989259902599125992259932599425995259962599725998259992600026001260022600326004260052600626007260082600926010260112601226013260142601526016260172601826019260202602126022260232602426025260262602726028260292603026031260322603326034260352603626037260382603926040260412604226043260442604526046260472604826049260502605126052260532605426055260562605726058260592606026061260622606326064260652606626067260682606926070260712607226073260742607526076260772607826079260802608126082260832608426085260862608726088260892609026091260922609326094260952609626097260982609926100261012610226103261042610526106261072610826109261102611126112261132611426115261162611726118261192612026121261222612326124261252612626127261282612926130261312613226133261342613526136261372613826139261402614126142261432614426145261462614726148261492615026151261522615326154261552615626157261582615926160261612616226163261642616526166261672616826169261702617126172261732617426175261762617726178261792618026181261822618326184261852618626187261882618926190261912619226193261942619526196261972619826199262002620126202262032620426205262062620726208262092621026211262122621326214262152621626217262182621926220262212622226223262242622526226262272622826229262302623126232262332623426235262362623726238262392624026241262422624326244262452624626247262482624926250262512625226253262542625526256262572625826259262602626126262262632626426265262662626726268262692627026271262722627326274262752627626277262782627926280262812628226283262842628526286262872628826289262902629126292262932629426295262962629726298262992630026301263022630326304263052630626307263082630926310263112631226313263142631526316263172631826319263202632126322263232632426325263262632726328263292633026331263322633326334263352633626337263382633926340263412634226343263442634526346263472634826349263502635126352263532635426355263562635726358263592636026361263622636326364263652636626367263682636926370263712637226373263742637526376263772637826379263802638126382263832638426385263862638726388263892639026391263922639326394263952639626397263982639926400264012640226403264042640526406264072640826409264102641126412264132641426415264162641726418264192642026421264222642326424264252642626427264282642926430264312643226433264342643526436264372643826439264402644126442264432644426445264462644726448264492645026451264522645326454264552645626457264582645926460264612646226463264642646526466264672646826469264702647126472264732647426475264762647726478264792648026481264822648326484264852648626487264882648926490264912649226493264942649526496264972649826499265002650126502265032650426505265062650726508265092651026511265122651326514265152651626517265182651926520265212652226523265242652526526265272652826529265302653126532265332653426535265362653726538265392654026541265422654326544265452654626547265482654926550265512655226553265542655526556265572655826559265602656126562265632656426565265662656726568265692657026571265722657326574265752657626577265782657926580265812658226583265842658526586265872658826589265902659126592265932659426595265962659726598265992660026601266022660326604266052660626607266082660926610266112661226613266142661526616266172661826619266202662126622266232662426625266262662726628266292663026631266322663326634266352663626637266382663926640266412664226643266442664526646266472664826649266502665126652266532665426655266562665726658266592666026661266622666326664266652666626667266682666926670266712667226673266742667526676266772667826679266802668126682266832668426685266862668726688266892669026691266922669326694266952669626697266982669926700267012670226703267042670526706267072670826709267102671126712267132671426715267162671726718267192672026721267222672326724267252672626727267282672926730267312673226733267342673526736267372673826739267402674126742267432674426745267462674726748267492675026751267522675326754267552675626757267582675926760267612676226763267642676526766267672676826769267702677126772267732677426775267762677726778267792678026781267822678326784267852678626787267882678926790267912679226793267942679526796267972679826799268002680126802268032680426805268062680726808268092681026811268122681326814268152681626817268182681926820268212682226823268242682526826268272682826829268302683126832268332683426835268362683726838268392684026841268422684326844268452684626847268482684926850268512685226853268542685526856268572685826859268602686126862268632686426865268662686726868268692687026871268722687326874268752687626877268782687926880268812688226883268842688526886268872688826889268902689126892268932689426895268962689726898268992690026901269022690326904269052690626907269082690926910269112691226913269142691526916269172691826919269202692126922269232692426925269262692726928269292693026931269322693326934269352693626937269382693926940269412694226943269442694526946269472694826949269502695126952269532695426955269562695726958269592696026961269622696326964269652696626967269682696926970269712697226973269742697526976269772697826979269802698126982269832698426985269862698726988269892699026991269922699326994269952699626997269982699927000270012700227003270042700527006270072700827009270102701127012270132701427015270162701727018270192702027021270222702327024270252702627027270282702927030270312703227033270342703527036270372703827039270402704127042270432704427045270462704727048270492705027051270522705327054270552705627057270582705927060270612706227063270642706527066270672706827069270702707127072270732707427075270762707727078270792708027081270822708327084270852708627087270882708927090270912709227093270942709527096270972709827099271002710127102271032710427105271062710727108271092711027111271122711327114271152711627117271182711927120271212712227123271242712527126271272712827129271302713127132271332713427135271362713727138271392714027141271422714327144271452714627147271482714927150271512715227153271542715527156271572715827159271602716127162271632716427165271662716727168271692717027171271722717327174271752717627177271782717927180271812718227183271842718527186271872718827189271902719127192271932719427195271962719727198271992720027201272022720327204272052720627207272082720927210272112721227213272142721527216272172721827219272202722127222272232722427225272262722727228272292723027231272322723327234272352723627237272382723927240272412724227243272442724527246272472724827249272502725127252272532725427255272562725727258272592726027261272622726327264272652726627267272682726927270272712727227273272742727527276272772727827279272802728127282272832728427285272862728727288272892729027291272922729327294272952729627297272982729927300273012730227303273042730527306273072730827309273102731127312273132731427315273162731727318273192732027321273222732327324273252732627327273282732927330273312733227333273342733527336273372733827339273402734127342273432734427345273462734727348273492735027351273522735327354273552735627357273582735927360273612736227363273642736527366273672736827369273702737127372273732737427375273762737727378273792738027381273822738327384273852738627387273882738927390273912739227393273942739527396273972739827399274002740127402274032740427405274062740727408274092741027411274122741327414274152741627417274182741927420274212742227423274242742527426274272742827429274302743127432274332743427435274362743727438274392744027441274422744327444274452744627447274482744927450274512745227453274542745527456274572745827459274602746127462274632746427465274662746727468274692747027471274722747327474274752747627477274782747927480274812748227483274842748527486274872748827489274902749127492274932749427495274962749727498274992750027501275022750327504275052750627507275082750927510275112751227513275142751527516275172751827519275202752127522275232752427525275262752727528275292753027531275322753327534275352753627537275382753927540275412754227543275442754527546275472754827549275502755127552275532755427555275562755727558275592756027561275622756327564275652756627567275682756927570275712757227573275742757527576275772757827579275802758127582275832758427585275862758727588275892759027591275922759327594275952759627597275982759927600276012760227603276042760527606276072760827609276102761127612276132761427615276162761727618276192762027621276222762327624276252762627627276282762927630276312763227633276342763527636276372763827639276402764127642276432764427645276462764727648276492765027651276522765327654276552765627657276582765927660276612766227663276642766527666276672766827669276702767127672276732767427675276762767727678276792768027681276822768327684276852768627687276882768927690276912769227693276942769527696276972769827699277002770127702277032770427705277062770727708277092771027711277122771327714277152771627717277182771927720277212772227723277242772527726277272772827729277302773127732277332773427735277362773727738277392774027741277422774327744277452774627747277482774927750277512775227753277542775527756277572775827759277602776127762277632776427765277662776727768277692777027771277722777327774277752777627777277782777927780277812778227783277842778527786277872778827789277902779127792277932779427795277962779727798277992780027801278022780327804278052780627807278082780927810278112781227813278142781527816278172781827819278202782127822278232782427825278262782727828278292783027831278322783327834278352783627837278382783927840278412784227843278442784527846278472784827849278502785127852278532785427855278562785727858278592786027861278622786327864278652786627867278682786927870278712787227873278742787527876278772787827879278802788127882278832788427885278862788727888278892789027891278922789327894278952789627897278982789927900279012790227903279042790527906279072790827909279102791127912279132791427915279162791727918279192792027921279222792327924279252792627927279282792927930279312793227933279342793527936279372793827939279402794127942279432794427945279462794727948279492795027951279522795327954279552795627957279582795927960279612796227963279642796527966279672796827969279702797127972279732797427975279762797727978279792798027981279822798327984279852798627987279882798927990279912799227993279942799527996279972799827999280002800128002280032800428005280062800728008280092801028011280122801328014280152801628017280182801928020280212802228023280242802528026280272802828029280302803128032280332803428035280362803728038280392804028041280422804328044280452804628047280482804928050280512805228053280542805528056280572805828059280602806128062280632806428065280662806728068280692807028071280722807328074280752807628077280782807928080280812808228083280842808528086280872808828089280902809128092280932809428095280962809728098280992810028101281022810328104281052810628107281082810928110281112811228113281142811528116281172811828119281202812128122281232812428125281262812728128281292813028131281322813328134281352813628137281382813928140281412814228143281442814528146281472814828149281502815128152281532815428155281562815728158281592816028161281622816328164281652816628167281682816928170281712817228173281742817528176281772817828179281802818128182281832818428185281862818728188281892819028191281922819328194281952819628197281982819928200282012820228203282042820528206282072820828209282102821128212282132821428215282162821728218282192822028221282222822328224282252822628227282282822928230282312823228233282342823528236282372823828239282402824128242282432824428245282462824728248282492825028251282522825328254282552825628257282582825928260282612826228263282642826528266282672826828269282702827128272282732827428275282762827728278282792828028281282822828328284282852828628287282882828928290282912829228293282942829528296282972829828299283002830128302283032830428305283062830728308283092831028311283122831328314283152831628317283182831928320283212832228323283242832528326283272832828329283302833128332283332833428335283362833728338283392834028341283422834328344283452834628347283482834928350283512835228353283542835528356283572835828359283602836128362283632836428365283662836728368283692837028371283722837328374283752837628377283782837928380283812838228383283842838528386283872838828389283902839128392283932839428395283962839728398283992840028401284022840328404284052840628407284082840928410284112841228413284142841528416284172841828419284202842128422284232842428425284262842728428284292843028431284322843328434284352843628437284382843928440284412844228443284442844528446284472844828449284502845128452284532845428455284562845728458284592846028461284622846328464284652846628467284682846928470284712847228473284742847528476284772847828479284802848128482284832848428485284862848728488284892849028491284922849328494284952849628497284982849928500285012850228503285042850528506285072850828509285102851128512285132851428515285162851728518285192852028521285222852328524285252852628527285282852928530285312853228533285342853528536285372853828539285402854128542285432854428545285462854728548285492855028551285522855328554285552855628557285582855928560285612856228563285642856528566285672856828569285702857128572285732857428575285762857728578285792858028581285822858328584285852858628587285882858928590285912859228593285942859528596285972859828599286002860128602286032860428605286062860728608286092861028611286122861328614286152861628617286182861928620286212862228623286242862528626286272862828629286302863128632286332863428635286362863728638286392864028641286422864328644286452864628647286482864928650286512865228653286542865528656286572865828659286602866128662286632866428665286662866728668286692867028671286722867328674286752867628677286782867928680286812868228683286842868528686286872868828689286902869128692286932869428695286962869728698286992870028701287022870328704287052870628707287082870928710287112871228713287142871528716287172871828719287202872128722287232872428725287262872728728287292873028731287322873328734287352873628737287382873928740287412874228743287442874528746287472874828749287502875128752287532875428755287562875728758287592876028761287622876328764287652876628767287682876928770287712877228773287742877528776287772877828779287802878128782287832878428785287862878728788287892879028791287922879328794287952879628797287982879928800288012880228803288042880528806288072880828809288102881128812288132881428815288162881728818288192882028821288222882328824288252882628827288282882928830288312883228833288342883528836288372883828839288402884128842288432884428845288462884728848288492885028851288522885328854288552885628857288582885928860288612886228863288642886528866288672886828869288702887128872288732887428875288762887728878288792888028881288822888328884288852888628887288882888928890288912889228893288942889528896288972889828899289002890128902289032890428905289062890728908289092891028911289122891328914289152891628917289182891928920289212892228923289242892528926289272892828929289302893128932289332893428935289362893728938289392894028941289422894328944289452894628947289482894928950289512895228953289542895528956289572895828959289602896128962289632896428965289662896728968289692897028971289722897328974289752897628977289782897928980289812898228983289842898528986289872898828989289902899128992289932899428995289962899728998289992900029001290022900329004290052900629007290082900929010290112901229013290142901529016290172901829019290202902129022290232902429025290262902729028290292903029031290322903329034290352903629037290382903929040290412904229043290442904529046290472904829049290502905129052290532905429055290562905729058290592906029061290622906329064290652906629067290682906929070290712907229073290742907529076290772907829079290802908129082290832908429085290862908729088290892909029091290922909329094290952909629097290982909929100291012910229103291042910529106291072910829109291102911129112291132911429115291162911729118291192912029121291222912329124291252912629127291282912929130291312913229133291342913529136291372913829139291402914129142291432914429145291462914729148291492915029151291522915329154291552915629157291582915929160291612916229163291642916529166291672916829169291702917129172291732917429175291762917729178291792918029181291822918329184291852918629187291882918929190291912919229193291942919529196291972919829199292002920129202292032920429205292062920729208292092921029211292122921329214292152921629217292182921929220292212922229223292242922529226292272922829229292302923129232292332923429235292362923729238292392924029241292422924329244292452924629247292482924929250292512925229253292542925529256292572925829259292602926129262292632926429265292662926729268292692927029271292722927329274292752927629277292782927929280292812928229283292842928529286292872928829289292902929129292292932929429295292962929729298292992930029301293022930329304293052930629307293082930929310293112931229313293142931529316293172931829319293202932129322293232932429325293262932729328293292933029331293322933329334293352933629337293382933929340293412934229343293442934529346293472934829349293502935129352293532935429355293562935729358293592936029361293622936329364293652936629367293682936929370293712937229373293742937529376293772937829379293802938129382293832938429385293862938729388293892939029391293922939329394293952939629397293982939929400294012940229403294042940529406294072940829409294102941129412294132941429415294162941729418294192942029421294222942329424294252942629427294282942929430294312943229433294342943529436294372943829439294402944129442294432944429445294462944729448294492945029451294522945329454294552945629457294582945929460294612946229463294642946529466294672946829469294702947129472294732947429475294762947729478294792948029481294822948329484294852948629487294882948929490294912949229493294942949529496294972949829499295002950129502295032950429505295062950729508295092951029511295122951329514295152951629517295182951929520295212952229523295242952529526295272952829529295302953129532295332953429535295362953729538295392954029541295422954329544295452954629547295482954929550295512955229553295542955529556295572955829559295602956129562295632956429565295662956729568295692957029571295722957329574295752957629577295782957929580295812958229583295842958529586295872958829589295902959129592295932959429595295962959729598295992960029601296022960329604296052960629607296082960929610296112961229613296142961529616296172961829619296202962129622296232962429625296262962729628296292963029631296322963329634296352963629637296382963929640296412964229643296442964529646296472964829649296502965129652296532965429655296562965729658296592966029661296622966329664296652966629667296682966929670296712967229673296742967529676296772967829679296802968129682296832968429685296862968729688296892969029691296922969329694296952969629697296982969929700297012970229703297042970529706297072970829709297102971129712297132971429715297162971729718297192972029721297222972329724297252972629727297282972929730297312973229733297342973529736297372973829739297402974129742297432974429745297462974729748297492975029751297522975329754297552975629757297582975929760297612976229763297642976529766297672976829769297702977129772297732977429775297762977729778297792978029781297822978329784297852978629787297882978929790297912979229793297942979529796297972979829799298002980129802298032980429805298062980729808298092981029811298122981329814298152981629817298182981929820298212982229823298242982529826298272982829829298302983129832298332983429835298362983729838298392984029841298422984329844298452984629847298482984929850298512985229853298542985529856298572985829859298602986129862298632986429865298662986729868298692987029871298722987329874298752987629877298782987929880298812988229883298842988529886298872988829889298902989129892298932989429895298962989729898298992990029901299022990329904299052990629907299082990929910299112991229913299142991529916299172991829919299202992129922299232992429925299262992729928299292993029931299322993329934299352993629937299382993929940299412994229943299442994529946299472994829949299502995129952299532995429955299562995729958299592996029961299622996329964299652996629967299682996929970299712997229973299742997529976299772997829979299802998129982299832998429985299862998729988299892999029991299922999329994299952999629997299982999930000300013000230003300043000530006300073000830009300103001130012300133001430015300163001730018300193002030021300223002330024300253002630027300283002930030300313003230033300343003530036300373003830039300403004130042300433004430045300463004730048300493005030051300523005330054300553005630057300583005930060300613006230063300643006530066300673006830069300703007130072300733007430075300763007730078300793008030081300823008330084300853008630087300883008930090300913009230093300943009530096300973009830099301003010130102301033010430105301063010730108301093011030111301123011330114301153011630117301183011930120301213012230123301243012530126301273012830129301303013130132301333013430135301363013730138301393014030141301423014330144301453014630147301483014930150301513015230153301543015530156301573015830159301603016130162301633016430165301663016730168301693017030171301723017330174301753017630177301783017930180301813018230183301843018530186301873018830189301903019130192301933019430195301963019730198301993020030201302023020330204302053020630207302083020930210302113021230213302143021530216302173021830219302203022130222302233022430225302263022730228302293023030231302323023330234302353023630237302383023930240302413024230243302443024530246302473024830249302503025130252302533025430255302563025730258302593026030261302623026330264302653026630267302683026930270302713027230273302743027530276302773027830279302803028130282302833028430285302863028730288302893029030291302923029330294302953029630297302983029930300303013030230303303043030530306303073030830309303103031130312303133031430315303163031730318303193032030321303223032330324303253032630327303283032930330303313033230333303343033530336303373033830339303403034130342303433034430345303463034730348303493035030351303523035330354303553035630357303583035930360303613036230363303643036530366303673036830369303703037130372303733037430375303763037730378303793038030381303823038330384303853038630387303883038930390303913039230393303943039530396303973039830399304003040130402304033040430405304063040730408304093041030411304123041330414304153041630417304183041930420304213042230423304243042530426304273042830429304303043130432304333043430435304363043730438304393044030441304423044330444304453044630447304483044930450304513045230453304543045530456304573045830459304603046130462304633046430465304663046730468304693047030471304723047330474304753047630477304783047930480304813048230483304843048530486304873048830489304903049130492304933049430495304963049730498304993050030501305023050330504305053050630507305083050930510305113051230513305143051530516305173051830519305203052130522305233052430525305263052730528305293053030531305323053330534305353053630537305383053930540305413054230543305443054530546305473054830549305503055130552305533055430555305563055730558305593056030561305623056330564305653056630567305683056930570305713057230573305743057530576305773057830579305803058130582305833058430585305863058730588305893059030591305923059330594305953059630597305983059930600306013060230603306043060530606306073060830609306103061130612306133061430615306163061730618306193062030621306223062330624306253062630627306283062930630306313063230633306343063530636306373063830639306403064130642306433064430645306463064730648306493065030651306523065330654306553065630657306583065930660306613066230663306643066530666306673066830669306703067130672306733067430675306763067730678306793068030681306823068330684306853068630687306883068930690306913069230693306943069530696306973069830699307003070130702307033070430705307063070730708307093071030711307123071330714307153071630717307183071930720307213072230723307243072530726307273072830729307303073130732307333073430735307363073730738307393074030741307423074330744307453074630747307483074930750307513075230753307543075530756307573075830759307603076130762307633076430765307663076730768307693077030771307723077330774307753077630777307783077930780307813078230783307843078530786307873078830789307903079130792307933079430795307963079730798307993080030801308023080330804308053080630807308083080930810308113081230813308143081530816308173081830819308203082130822308233082430825308263082730828308293083030831308323083330834308353083630837308383083930840308413084230843308443084530846308473084830849308503085130852308533085430855308563085730858308593086030861308623086330864308653086630867308683086930870308713087230873308743087530876308773087830879308803088130882308833088430885308863088730888308893089030891308923089330894308953089630897308983089930900309013090230903309043090530906309073090830909309103091130912309133091430915309163091730918309193092030921309223092330924309253092630927309283092930930309313093230933309343093530936309373093830939309403094130942309433094430945309463094730948309493095030951309523095330954309553095630957309583095930960309613096230963309643096530966309673096830969309703097130972309733097430975309763097730978309793098030981309823098330984309853098630987309883098930990309913099230993309943099530996309973099830999310003100131002310033100431005310063100731008310093101031011310123101331014310153101631017310183101931020310213102231023310243102531026310273102831029310303103131032310333103431035310363103731038310393104031041310423104331044310453104631047310483104931050310513105231053310543105531056310573105831059310603106131062310633106431065310663106731068310693107031071310723107331074310753107631077310783107931080310813108231083310843108531086310873108831089310903109131092310933109431095310963109731098310993110031101311023110331104311053110631107311083110931110311113111231113311143111531116311173111831119311203112131122311233112431125311263112731128311293113031131311323113331134311353113631137311383113931140311413114231143311443114531146311473114831149311503115131152311533115431155311563115731158311593116031161311623116331164311653116631167311683116931170311713117231173311743117531176311773117831179311803118131182311833118431185311863118731188311893119031191311923119331194311953119631197311983119931200312013120231203312043120531206312073120831209312103121131212312133121431215312163121731218312193122031221312223122331224312253122631227312283122931230312313123231233312343123531236312373123831239312403124131242312433124431245312463124731248312493125031251312523125331254312553125631257312583125931260312613126231263312643126531266312673126831269312703127131272312733127431275312763127731278312793128031281312823128331284312853128631287312883128931290312913129231293312943129531296312973129831299313003130131302313033130431305313063130731308313093131031311313123131331314313153131631317313183131931320313213132231323313243132531326313273132831329313303133131332313333133431335313363133731338313393134031341313423134331344313453134631347313483134931350313513135231353313543135531356313573135831359313603136131362313633136431365313663136731368313693137031371313723137331374313753137631377313783137931380313813138231383313843138531386313873138831389313903139131392313933139431395313963139731398313993140031401314023140331404314053140631407314083140931410314113141231413314143141531416314173141831419314203142131422314233142431425314263142731428314293143031431314323143331434314353143631437314383143931440314413144231443314443144531446314473144831449314503145131452314533145431455314563145731458314593146031461314623146331464314653146631467314683146931470314713147231473314743147531476314773147831479314803148131482314833148431485314863148731488314893149031491314923149331494314953149631497314983149931500315013150231503315043150531506315073150831509315103151131512315133151431515315163151731518315193152031521315223152331524315253152631527315283152931530315313153231533315343153531536315373153831539315403154131542315433154431545315463154731548315493155031551315523155331554315553155631557315583155931560315613156231563315643156531566315673156831569315703157131572315733157431575315763157731578315793158031581315823158331584315853158631587315883158931590315913159231593315943159531596315973159831599316003160131602316033160431605316063160731608316093161031611316123161331614316153161631617316183161931620316213162231623316243162531626316273162831629316303163131632316333163431635316363163731638316393164031641316423164331644316453164631647316483164931650316513165231653316543165531656316573165831659316603166131662316633166431665316663166731668316693167031671316723167331674316753167631677316783167931680316813168231683316843168531686316873168831689316903169131692316933169431695316963169731698316993170031701317023170331704317053170631707317083170931710317113171231713317143171531716317173171831719317203172131722317233172431725317263172731728317293173031731317323173331734317353173631737317383173931740317413174231743317443174531746317473174831749317503175131752317533175431755317563175731758317593176031761317623176331764317653176631767317683176931770317713177231773317743177531776317773177831779317803178131782317833178431785317863178731788317893179031791317923179331794317953179631797317983179931800318013180231803318043180531806318073180831809318103181131812318133181431815318163181731818318193182031821318223182331824318253182631827318283182931830318313183231833318343183531836318373183831839318403184131842318433184431845318463184731848318493185031851318523185331854318553185631857318583185931860318613186231863318643186531866318673186831869318703187131872318733187431875318763187731878318793188031881318823188331884318853188631887318883188931890318913189231893318943189531896318973189831899319003190131902319033190431905319063190731908319093191031911319123191331914319153191631917319183191931920319213192231923319243192531926319273192831929319303193131932319333193431935319363193731938319393194031941319423194331944319453194631947319483194931950319513195231953319543195531956319573195831959319603196131962319633196431965319663196731968319693197031971319723197331974319753197631977319783197931980319813198231983319843198531986319873198831989319903199131992319933199431995319963199731998319993200032001320023200332004320053200632007320083200932010320113201232013320143201532016320173201832019320203202132022320233202432025320263202732028320293203032031320323203332034320353203632037320383203932040320413204232043320443204532046320473204832049320503205132052320533205432055320563205732058320593206032061320623206332064320653206632067320683206932070320713207232073320743207532076320773207832079320803208132082320833208432085320863208732088320893209032091320923209332094320953209632097320983209932100321013210232103321043210532106321073210832109321103211132112321133211432115321163211732118321193212032121321223212332124321253212632127321283212932130321313213232133321343213532136321373213832139321403214132142321433214432145321463214732148321493215032151321523215332154321553215632157321583215932160321613216232163321643216532166321673216832169321703217132172321733217432175321763217732178321793218032181321823218332184321853218632187321883218932190321913219232193321943219532196321973219832199322003220132202322033220432205322063220732208322093221032211322123221332214322153221632217322183221932220322213222232223322243222532226322273222832229322303223132232322333223432235322363223732238322393224032241322423224332244322453224632247322483224932250322513225232253322543225532256322573225832259322603226132262322633226432265322663226732268322693227032271322723227332274322753227632277322783227932280322813228232283322843228532286322873228832289322903229132292322933229432295322963229732298322993230032301323023230332304323053230632307323083230932310323113231232313323143231532316323173231832319323203232132322323233232432325323263232732328323293233032331323323233332334323353233632337323383233932340323413234232343323443234532346323473234832349323503235132352323533235432355323563235732358323593236032361323623236332364323653236632367323683236932370323713237232373323743237532376323773237832379323803238132382323833238432385323863238732388323893239032391323923239332394323953239632397323983239932400324013240232403324043240532406324073240832409324103241132412324133241432415324163241732418324193242032421324223242332424324253242632427324283242932430324313243232433324343243532436324373243832439324403244132442324433244432445324463244732448324493245032451324523245332454324553245632457324583245932460324613246232463324643246532466324673246832469324703247132472324733247432475324763247732478324793248032481324823248332484324853248632487324883248932490324913249232493324943249532496324973249832499325003250132502325033250432505325063250732508325093251032511325123251332514325153251632517325183251932520325213252232523325243252532526325273252832529325303253132532325333253432535325363253732538325393254032541325423254332544325453254632547325483254932550325513255232553325543255532556325573255832559325603256132562325633256432565325663256732568325693257032571325723257332574325753257632577325783257932580325813258232583325843258532586325873258832589325903259132592325933259432595325963259732598325993260032601326023260332604326053260632607326083260932610326113261232613326143261532616326173261832619326203262132622326233262432625326263262732628326293263032631326323263332634326353263632637326383263932640326413264232643326443264532646326473264832649326503265132652326533265432655326563265732658326593266032661326623266332664326653266632667326683266932670326713267232673326743267532676326773267832679326803268132682326833268432685326863268732688326893269032691326923269332694326953269632697326983269932700327013270232703327043270532706327073270832709327103271132712327133271432715327163271732718327193272032721327223272332724327253272632727327283272932730327313273232733327343273532736327373273832739327403274132742327433274432745327463274732748327493275032751327523275332754327553275632757327583275932760327613276232763327643276532766327673276832769327703277132772327733277432775327763277732778327793278032781327823278332784327853278632787327883278932790327913279232793327943279532796327973279832799328003280132802328033280432805328063280732808328093281032811328123281332814328153281632817328183281932820328213282232823328243282532826328273282832829328303283132832328333283432835328363283732838328393284032841328423284332844328453284632847328483284932850328513285232853328543285532856328573285832859328603286132862328633286432865328663286732868328693287032871328723287332874328753287632877328783287932880328813288232883328843288532886328873288832889328903289132892328933289432895328963289732898328993290032901329023290332904329053290632907329083290932910329113291232913329143291532916329173291832919329203292132922329233292432925329263292732928329293293032931329323293332934329353293632937329383293932940329413294232943329443294532946329473294832949329503295132952329533295432955329563295732958329593296032961329623296332964329653296632967329683296932970329713297232973329743297532976329773297832979329803298132982329833298432985329863298732988329893299032991329923299332994329953299632997329983299933000330013300233003330043300533006330073300833009330103301133012330133301433015330163301733018330193302033021330223302333024330253302633027330283302933030330313303233033330343303533036330373303833039330403304133042330433304433045330463304733048330493305033051330523305333054330553305633057330583305933060330613306233063330643306533066330673306833069330703307133072330733307433075330763307733078330793308033081330823308333084330853308633087330883308933090330913309233093330943309533096330973309833099331003310133102331033310433105331063310733108331093311033111331123311333114331153311633117331183311933120331213312233123331243312533126331273312833129331303313133132331333313433135331363313733138331393314033141331423314333144331453314633147331483314933150331513315233153331543315533156331573315833159331603316133162331633316433165331663316733168331693317033171331723317333174331753317633177331783317933180331813318233183331843318533186331873318833189331903319133192331933319433195331963319733198331993320033201332023320333204332053320633207332083320933210332113321233213332143321533216332173321833219332203322133222332233322433225332263322733228332293323033231332323323333234332353323633237332383323933240332413324233243332443324533246332473324833249332503325133252332533325433255332563325733258332593326033261332623326333264332653326633267332683326933270332713327233273332743327533276332773327833279332803328133282332833328433285332863328733288332893329033291332923329333294332953329633297332983329933300333013330233303333043330533306333073330833309333103331133312333133331433315333163331733318333193332033321333223332333324333253332633327333283332933330333313333233333333343333533336333373333833339333403334133342333433334433345333463334733348333493335033351333523335333354333553335633357333583335933360333613336233363333643336533366333673336833369333703337133372333733337433375333763337733378333793338033381333823338333384333853338633387333883338933390333913339233393333943339533396333973339833399334003340133402334033340433405334063340733408334093341033411334123341333414334153341633417334183341933420334213342233423334243342533426334273342833429334303343133432334333343433435334363343733438334393344033441334423344333444334453344633447334483344933450334513345233453334543345533456334573345833459334603346133462334633346433465334663346733468334693347033471334723347333474334753347633477334783347933480334813348233483334843348533486334873348833489334903349133492334933349433495334963349733498334993350033501335023350333504335053350633507335083350933510335113351233513335143351533516335173351833519335203352133522335233352433525335263352733528335293353033531335323353333534335353353633537335383353933540335413354233543335443354533546335473354833549335503355133552335533355433555335563355733558335593356033561335623356333564335653356633567335683356933570335713357233573335743357533576335773357833579335803358133582335833358433585335863358733588335893359033591335923359333594335953359633597335983359933600336013360233603336043360533606336073360833609336103361133612336133361433615336163361733618336193362033621336223362333624336253362633627336283362933630336313363233633336343363533636336373363833639336403364133642336433364433645336463364733648336493365033651336523365333654336553365633657336583365933660336613366233663336643366533666336673366833669336703367133672336733367433675336763367733678336793368033681336823368333684336853368633687336883368933690336913369233693336943369533696336973369833699337003370133702337033370433705337063370733708337093371033711337123371333714337153371633717337183371933720337213372233723337243372533726337273372833729337303373133732337333373433735337363373733738337393374033741337423374333744337453374633747337483374933750337513375233753337543375533756337573375833759337603376133762337633376433765337663376733768337693377033771337723377333774337753377633777337783377933780337813378233783337843378533786337873378833789337903379133792337933379433795337963379733798337993380033801338023380333804338053380633807338083380933810338113381233813338143381533816338173381833819338203382133822338233382433825338263382733828338293383033831338323383333834338353383633837338383383933840338413384233843338443384533846338473384833849338503385133852338533385433855338563385733858338593386033861338623386333864338653386633867338683386933870338713387233873338743387533876338773387833879338803388133882338833388433885338863388733888338893389033891338923389333894338953389633897338983389933900339013390233903339043390533906339073390833909339103391133912339133391433915339163391733918339193392033921339223392333924339253392633927339283392933930339313393233933339343393533936339373393833939339403394133942339433394433945339463394733948339493395033951339523395333954339553395633957339583395933960339613396233963339643396533966339673396833969339703397133972339733397433975339763397733978339793398033981339823398333984339853398633987339883398933990339913399233993339943399533996339973399833999340003400134002340033400434005340063400734008340093401034011340123401334014340153401634017340183401934020340213402234023340243402534026340273402834029340303403134032340333403434035340363403734038340393404034041340423404334044340453404634047340483404934050340513405234053340543405534056340573405834059340603406134062340633406434065340663406734068340693407034071340723407334074340753407634077340783407934080340813408234083340843408534086340873408834089340903409134092340933409434095340963409734098340993410034101341023410334104341053410634107341083410934110341113411234113341143411534116341173411834119341203412134122341233412434125341263412734128341293413034131341323413334134341353413634137341383413934140341413414234143341443414534146341473414834149341503415134152341533415434155341563415734158341593416034161341623416334164341653416634167341683416934170341713417234173341743417534176341773417834179341803418134182341833418434185341863418734188341893419034191341923419334194341953419634197341983419934200342013420234203342043420534206342073420834209342103421134212342133421434215342163421734218342193422034221342223422334224342253422634227342283422934230342313423234233342343423534236342373423834239342403424134242342433424434245342463424734248342493425034251342523425334254342553425634257342583425934260342613426234263342643426534266342673426834269342703427134272342733427434275342763427734278342793428034281342823428334284342853428634287342883428934290342913429234293342943429534296342973429834299343003430134302343033430434305343063430734308343093431034311343123431334314343153431634317343183431934320343213432234323343243432534326343273432834329343303433134332343333433434335343363433734338343393434034341343423434334344343453434634347343483434934350343513435234353343543435534356343573435834359343603436134362343633436434365343663436734368343693437034371343723437334374343753437634377343783437934380343813438234383343843438534386343873438834389343903439134392343933439434395343963439734398343993440034401344023440334404344053440634407344083440934410344113441234413344143441534416344173441834419344203442134422344233442434425344263442734428344293443034431344323443334434344353443634437344383443934440344413444234443344443444534446344473444834449344503445134452344533445434455344563445734458344593446034461344623446334464344653446634467344683446934470344713447234473344743447534476344773447834479344803448134482344833448434485344863448734488344893449034491344923449334494344953449634497344983449934500345013450234503345043450534506345073450834509345103451134512345133451434515345163451734518345193452034521345223452334524345253452634527345283452934530345313453234533345343453534536345373453834539345403454134542345433454434545345463454734548345493455034551345523455334554345553455634557345583455934560345613456234563345643456534566345673456834569345703457134572345733457434575345763457734578345793458034581345823458334584345853458634587345883458934590345913459234593345943459534596345973459834599346003460134602346033460434605346063460734608346093461034611346123461334614346153461634617346183461934620346213462234623346243462534626346273462834629346303463134632346333463434635346363463734638346393464034641346423464334644346453464634647346483464934650346513465234653346543465534656346573465834659346603466134662346633466434665346663466734668346693467034671346723467334674346753467634677346783467934680346813468234683346843468534686346873468834689346903469134692346933469434695346963469734698346993470034701347023470334704347053470634707347083470934710347113471234713347143471534716347173471834719347203472134722347233472434725347263472734728347293473034731347323473334734347353473634737347383473934740347413474234743347443474534746347473474834749347503475134752347533475434755347563475734758347593476034761347623476334764347653476634767347683476934770347713477234773347743477534776347773477834779347803478134782347833478434785347863478734788347893479034791347923479334794347953479634797347983479934800348013480234803348043480534806348073480834809348103481134812348133481434815348163481734818348193482034821348223482334824348253482634827348283482934830348313483234833348343483534836348373483834839348403484134842348433484434845348463484734848348493485034851348523485334854348553485634857348583485934860348613486234863348643486534866348673486834869348703487134872348733487434875348763487734878348793488034881348823488334884348853488634887348883488934890348913489234893348943489534896348973489834899349003490134902349033490434905349063490734908349093491034911349123491334914349153491634917349183491934920349213492234923349243492534926349273492834929349303493134932349333493434935349363493734938349393494034941349423494334944349453494634947349483494934950349513495234953349543495534956349573495834959349603496134962349633496434965349663496734968349693497034971349723497334974349753497634977349783497934980349813498234983349843498534986349873498834989349903499134992349933499434995349963499734998349993500035001350023500335004350053500635007350083500935010350113501235013350143501535016350173501835019350203502135022350233502435025350263502735028350293503035031350323503335034350353503635037350383503935040350413504235043350443504535046350473504835049350503505135052350533505435055350563505735058350593506035061350623506335064350653506635067350683506935070350713507235073350743507535076350773507835079350803508135082350833508435085350863508735088350893509035091350923509335094350953509635097350983509935100351013510235103351043510535106351073510835109351103511135112351133511435115351163511735118351193512035121351223512335124351253512635127351283512935130351313513235133351343513535136351373513835139351403514135142351433514435145351463514735148351493515035151351523515335154351553515635157351583515935160351613516235163351643516535166351673516835169351703517135172351733517435175351763517735178351793518035181351823518335184351853518635187351883518935190351913519235193351943519535196351973519835199352003520135202352033520435205352063520735208352093521035211352123521335214352153521635217352183521935220352213522235223352243522535226352273522835229352303523135232352333523435235352363523735238352393524035241352423524335244352453524635247352483524935250352513525235253352543525535256352573525835259352603526135262352633526435265352663526735268352693527035271352723527335274352753527635277352783527935280352813528235283352843528535286352873528835289352903529135292 |
- # SOME DESCRIPTIVE TITLE.
- # Copyright (C) 2021 the authors of Guix (msgids) and the following authors (msgstr)
- # This file is distributed under the same license as the GNU guix package.
- # simmon <simmon@nplob.com>, 2021, 2022.
- # Kim InSoo <simmon@nplob.com>, 2022.
- # 김인수 <simmon@nplob.com>, 2022.
- msgid ""
- msgstr ""
- "Project-Id-Version: GNU guix\n"
- "Report-Msgid-Bugs-To: bug-guix@gnu.org\n"
- "POT-Creation-Date: 2023-03-10 17:18+0000\n"
- "PO-Revision-Date: 2022-11-25 07:19+0000\n"
- "Last-Translator: 김인수 <simmon@nplob.com>\n"
- "Language-Team: Korean <https://translate.fedoraproject.org/projects/guix/packages/ko/>\n"
- "Language: ko\n"
- "MIME-Version: 1.0\n"
- "Content-Type: text/plain; charset=UTF-8\n"
- "Content-Transfer-Encoding: 8bit\n"
- "Plural-Forms: nplurals=1; plural=0;\n"
- "X-Generator: Weblate 4.14.2\n"
- #: gnu/packages/abiword.scm:124
- msgid "Word processing program"
- msgstr ""
- #. TRANSLATORS: Dear translator, We would like to inform you that package
- #. descriptions may occasionally include Texinfo markup. Texinfo markup
- #. looks like "@code{rm -rf}", "@emph{important}", etc. When translating,
- #. please leave markup as is.
- #: gnu/packages/abiword.scm:133
- msgid ""
- "AbiWord is a word processing program. It is rapidly\n"
- "becoming a state of the art word processor, with lots of features useful for\n"
- "your daily work, personal needs, or for just some good old typing fun."
- msgstr ""
- "AbiWord는 워드프로세서용 프로그램입니다.\n"
- "이는 일상적인 작업, 개인적인 요구, 또는 오래된 입력방식을 즐기는 경우에 유용한 기능을 포함하고 있으며\n"
- "최신 유행의 워드프로세서로 빠르게 변화하고 있습니다."
- #: gnu/packages/aspell.scm:90
- msgid "Spell checker"
- msgstr ""
- #: gnu/packages/aspell.scm:92
- msgid ""
- "Aspell is a spell-checker which can be used either as a library or as\n"
- "a standalone program. Notable features of Aspell include its full support of\n"
- "documents written in the UTF-8 encoding and its ability to use multiple\n"
- "dictionaries, including personal ones."
- msgstr ""
- #: gnu/packages/aspell.scm:150
- msgid "This package provides a dictionary for the GNU Aspell spell checker."
- msgstr "이 꾸러미는 GNU Aspell 맞춤법 검사기를 위한 사전을 제공합니다."
- #: gnu/packages/aspell.scm:446
- msgid "Interactive spell-checking tool for Unix"
- msgstr "유닉스를 위한 대화형 맞춤법-점검용 도구"
- #: gnu/packages/aspell.scm:447
- msgid ""
- "Ispell is an interactive spell-checking tool supporting many\n"
- "European languages."
- msgstr ""
- "Ispell은 수많은 유럽 언어 지원하는 상호작용 맞춤법 검사용\n"
- "도구입니다."
- #: gnu/packages/audio.scm:205
- msgid "Embedded Audio Acceleration"
- msgstr ""
- #: gnu/packages/audio.scm:206
- msgid ""
- "OpenSLES is a royalty-free, cross-platform,\n"
- "hardware-accelerated audio API tuned for embedded systems. It provides a\n"
- "standardized, high-performance, low-latency method to access audio\n"
- "functionality for developers of native applications on embedded mobile\n"
- "multimedia devices, enabling straightforward cross-platform deployment of\n"
- "hardware and software audio capabilities, reducing implementation effort, and\n"
- "promoting the market for advanced audio."
- msgstr ""
- #: gnu/packages/audio.scm:241
- msgid "Software Synthesizer"
- msgstr ""
- #: gnu/packages/audio.scm:242
- msgid ""
- "WildMIDI is a simple software midi player which has a core\n"
- "softsynth library that can be used with other applications."
- msgstr ""
- #: gnu/packages/audio.scm:304
- msgid "WebRTC's Audio Processing Library"
- msgstr ""
- #: gnu/packages/audio.scm:305
- msgid ""
- "WebRTC-Audio-Processing library based on Google's\n"
- "implementation of WebRTC."
- msgstr ""
- #: gnu/packages/audio.scm:324
- msgid "VisualOn AAC Encoder"
- msgstr ""
- #: gnu/packages/audio.scm:325
- msgid ""
- "VO-AACENC is the VisualOn implementation of Advanced Audio\n"
- "Coding (AAC) encoder."
- msgstr ""
- #: gnu/packages/audio.scm:353
- msgid "ALSA interfacing library"
- msgstr ""
- #: gnu/packages/audio.scm:354
- msgid ""
- "TinyALSA is a small library to interface with ALSA in the\n"
- "Linux kernel."
- msgstr ""
- #: gnu/packages/audio.scm:380
- msgid "Video game music file playback library"
- msgstr ""
- #: gnu/packages/audio.scm:382
- msgid ""
- "Game-music-emu is a collection of video game music file emulators that\n"
- "support the following formats and systems:\n"
- "@table @code\n"
- "@item AY\n"
- "ZX Spectrum/Asmtrad CPC\n"
- "@item GBS\n"
- "Nintendo Game Boy\n"
- "@item GYM\n"
- "Sega Genesis/Mega Drive\n"
- "@item HES\n"
- "NEC TurboGrafx-16/PC Engine\n"
- "@item KSS\n"
- "MSX Home Computer/other Z80 systems (doesn't support FM sound)\n"
- "@item NSF/NSFE\n"
- "Nintendo NES/Famicom (with VRC 6, Namco 106, and FME-7 sound)\n"
- "@item SAP\n"
- "Atari systems using POKEY sound chip\n"
- "@item SPC\n"
- "Super Nintendo/Super Famicom\n"
- "@item VGM/VGZ\n"
- "Sega Master System/Mark III, Sega Genesis/Mega Drive, BBC Micro\n"
- "@end table"
- msgstr ""
- #: gnu/packages/audio.scm:445
- msgid "Audio tracking library"
- msgstr ""
- #: gnu/packages/audio.scm:446
- msgid ""
- "LibOpenMPT is a cross-platform C++ and C module playback\n"
- "library. It is based on the player code of the Open ModPlug Tracker project."
- msgstr ""
- #: gnu/packages/audio.scm:476
- msgid "Open Fingerprint Architecture"
- msgstr ""
- #: gnu/packages/audio.scm:477
- msgid ""
- "LibOFA is an audio fingerprint library, created and provided\n"
- "by MusicIP."
- msgstr ""
- #: gnu/packages/audio.scm:501
- msgid "MIDI to WAVE converter library"
- msgstr ""
- #: gnu/packages/audio.scm:502
- msgid ""
- "LibTiMidity is a MIDI to WAVE converter library that uses\n"
- "Gravis Ultrasound-compatible patch files to generate digital audio data from\n"
- "General MIDI files."
- msgstr ""
- #: gnu/packages/audio.scm:526 gnu/packages/audio.scm:545
- msgid "Adaptive Multi Rate Codec"
- msgstr ""
- #: gnu/packages/audio.scm:527
- msgid ""
- "VO-AMR is a library of VisualOn implementation of\n"
- "Adaptive Multi Rate Narrowband and Wideband (AMR-NB and AMR-WB) speech codec."
- msgstr ""
- #: gnu/packages/audio.scm:546
- msgid ""
- "OpenCore-AMR is a library of OpenCORE Framework\n"
- "implementation of Adaptive Multi Rate Narrowband and Wideband\n"
- "(AMR-NB and AMR-WB) speech codec."
- msgstr ""
- #: gnu/packages/audio.scm:577
- msgid "Realtime modular synthesizer and effect processor"
- msgstr ""
- #: gnu/packages/audio.scm:579
- msgid ""
- "AlsaModularSynth is a digital implementation of a classical analog\n"
- "modular synthesizer system. It uses virtual control voltages to control the\n"
- "parameters of the modules. The control voltages which control the frequency\n"
- "e.g. of the VCO (Voltage Controlled Oscillator) and VCF (Voltage Controlled\n"
- "Filter) modules follow the convention of 1V / Octave."
- msgstr ""
- #: gnu/packages/audio.scm:617
- msgid "Library for audio labelling"
- msgstr ""
- #: gnu/packages/audio.scm:619
- msgid ""
- "aubio is a tool designed for the extraction of annotations from audio\n"
- "signals. Its features include segmenting a sound file before each of its\n"
- "attacks, performing pitch detection, tapping the beat and producing MIDI\n"
- "streams from live audio."
- msgstr ""
- #: gnu/packages/audio.scm:664
- msgid "Audio processing program with an interactive mode"
- msgstr ""
- #: gnu/packages/audio.scm:666
- msgid "dsp is an audio processing program with an interactive mode."
- msgstr ""
- #: gnu/packages/audio.scm:713
- msgid "C++ library of functions for DSP and Music Informatics purposes"
- msgstr ""
- #: gnu/packages/audio.scm:715
- msgid ""
- "QM-DSP is a C++ library of functions for DSP and Music Informatics\n"
- "purposes developed at Queen Mary, University of London."
- msgstr ""
- #: gnu/packages/audio.scm:849
- msgid "Digital audio workstation"
- msgstr ""
- #: gnu/packages/audio.scm:851
- msgid ""
- "Ardour is a multi-channel digital audio workstation, allowing users to\n"
- "record, edit, mix and master audio and MIDI projects. It is targeted at audio\n"
- "engineers, musicians, soundtrack editors and composers."
- msgstr ""
- #: gnu/packages/audio.scm:986 gnu/packages/audio.scm:1097
- msgid "Software for recording and editing sounds"
- msgstr ""
- #: gnu/packages/audio.scm:988
- msgid ""
- "Audacity is a multi-track audio editor designed for recording, playing\n"
- "and editing digital audio. It features digital effects and spectrum analysis\n"
- "tools."
- msgstr ""
- #: gnu/packages/audio.scm:1099
- msgid ""
- "Tenacity is a multi-track audio editor designed for recording, playing\n"
- "and editing digital audio. It features digital effects and spectrum analysis\n"
- "tools."
- msgstr ""
- #: gnu/packages/audio.scm:1154
- msgid "Library to handle various audio file formats"
- msgstr ""
- #: gnu/packages/audio.scm:1155
- msgid ""
- "This is an open-source version of SGI's audiofile library.\n"
- "It provides a uniform programming interface for processing of audio data to\n"
- "and from audio files of many common formats.\n"
- "\n"
- "Currently supported file formats include AIFF/AIFF-C, WAVE, and NeXT/Sun\n"
- ".snd/.au, BICS, and raw data. Supported compression formats are currently\n"
- "G.711 mu-law and A-law."
- msgstr ""
- #: gnu/packages/audio.scm:1195
- msgid "Pitch-correction LADSPA audio plugin"
- msgstr ""
- #: gnu/packages/audio.scm:1197
- msgid ""
- "Autotalent is a LADSPA plugin for real-time pitch-correction. Among its\n"
- "controls are allowable notes, strength of correction, LFO for vibrato and\n"
- "formant warp."
- msgstr ""
- #: gnu/packages/audio.scm:1247
- msgid "Tonewheel organ synthesizer"
- msgstr ""
- #: gnu/packages/audio.scm:1249
- msgid ""
- "AZR-3 is a port of the free VST plugin AZR-3. It is a tonewheel organ\n"
- "with drawbars, distortion and rotating speakers. The organ has three\n"
- "sections, two polyphonic sections with nine drawbars each and one monophonic\n"
- "bass section with five drawbars. A standalone JACK application and LV2\n"
- "plugins are provided."
- msgstr ""
- #: gnu/packages/audio.scm:1285
- msgid "Audio plug-in pack for LV2 and JACK environments"
- msgstr ""
- #: gnu/packages/audio.scm:1287
- msgid ""
- "Calf Studio Gear is an audio plug-in pack for LV2 and JACK environments.\n"
- "The suite contains lots of effects (delay, modulation, signal processing,\n"
- "filters, equalizers, dynamics, distortion and mastering effects),\n"
- "instruments (SF2 player, organ simulator and a monophonic synthesizer) and\n"
- "tools (analyzer, mono/stereo tools, crossovers)."
- msgstr ""
- #: gnu/packages/audio.scm:1327
- msgid "LV2 port of the CAPS audio plugin collection"
- msgstr ""
- #: gnu/packages/audio.scm:1329
- msgid ""
- "LV2 port of CAPS, a collection of audio plugins comprising basic virtual\n"
- "guitar amplification and a small range of classic effects, signal processors and\n"
- "generators of mostly elementary and occasionally exotic nature."
- msgstr ""
- #: gnu/packages/audio.scm:1358
- msgid "Real-time C++ @acronym{IIR, infinite impulse response} filter library"
- msgstr ""
- #: gnu/packages/audio.scm:1360
- msgid ""
- "This C++ library implements the Butterworth, RBJ, and Chebychev\n"
- "@acronym{IIR, infinite impulse response} filters. Samples are processed one by\n"
- "one, in real time. It can easily import coefficients generated with Python\n"
- "(@code{scipy}). It also avoids memory leaks by allocating memory at compile\n"
- "time, using templates, instead of calling @code{malloc()} or @code{new}."
- msgstr ""
- #: gnu/packages/audio.scm:1401
- msgid "LV2 plugins for live use"
- msgstr ""
- #: gnu/packages/audio.scm:1403
- msgid ""
- "The infamous plugins are a collection of LV2 audio plugins for live\n"
- "performances. The plugins include a cellular automaton synthesizer, an\n"
- "envelope follower, distortion effects, tape effects and more."
- msgstr ""
- #: gnu/packages/audio.scm:1436
- msgid "Synchronous multiroom audio player"
- msgstr ""
- #: gnu/packages/audio.scm:1438
- msgid ""
- "Snapcast is a multi-room client-server audio player. Clients are time\n"
- "synchronized with the server to play synced audio."
- msgstr ""
- #: gnu/packages/audio.scm:1467
- msgid "The SWH Plugins package for the LADSPA plugin system"
- msgstr "LADSPA 플러그인 시스템을 위한 SWH 플러그인 꾸러미"
- #: gnu/packages/audio.scm:1468
- msgid "This package provides Steve Harris's LADSPA plugins."
- msgstr "이 꾸러미는 스티브 해리스씨의 LADSPA 플러그인을 제공합니다."
- #: gnu/packages/audio.scm:1506
- msgid "SWH plugins in LV2 format"
- msgstr ""
- #: gnu/packages/audio.scm:1508
- msgid ""
- "Swh-plugins-lv2 is a collection of audio plugins in LV2 format. Plugin\n"
- "classes include: dynamics (compressor, limiter), time (delay, chorus,\n"
- "flanger), ringmodulator, distortion, filters, pitchshift, oscillators,\n"
- "emulation (valve, tape), bit fiddling (decimator, pointer-cast), etc."
- msgstr ""
- #: gnu/packages/audio.scm:1540
- msgid "C++ library for access to DJ record libraries"
- msgstr ""
- #: gnu/packages/audio.scm:1542
- msgid ""
- "@code{libdjinterop} is a C++ library that allows access to database\n"
- "formats used to store information about DJ record libraries."
- msgstr ""
- #: gnu/packages/audio.scm:1603
- msgid "Sound Synthesis with Physical Models"
- msgstr ""
- #: gnu/packages/audio.scm:1604 gnu/packages/audio.scm:1635
- msgid ""
- "Tao is a software package for sound synthesis using physical\n"
- "models. It provides a virtual acoustic material constructed from masses and\n"
- "springs which can be used as the basis for building quite complex virtual\n"
- "musical instruments. Tao comes with a synthesis language for creating and\n"
- "playing instruments and a C++ API for those who would like to use it as an\n"
- "object library."
- msgstr ""
- #: gnu/packages/audio.scm:1634
- msgid "Sound synthesis with physical models"
- msgstr ""
- #: gnu/packages/audio.scm:1668
- msgid "Sound and music computing system"
- msgstr ""
- #: gnu/packages/audio.scm:1670
- msgid ""
- "Csound is a user-programmable and user-extensible sound processing\n"
- "language and software synthesizer."
- msgstr ""
- #: gnu/packages/audio.scm:1695
- msgid "Convert SMF MIDI files to and from plain text"
- msgstr ""
- #: gnu/packages/audio.scm:1697
- msgid ""
- "midicomp can manipulate SMF (Standard MIDI File) files. It can both\n"
- " read and write SMF files in 0 or format 1 and also read and write its own\n"
- " plain text format. This means a SMF file can be turned into easily\n"
- " parseable text, edited with any text editor or filtered through any script\n"
- " language, and recompiled back into a binary SMF file."
- msgstr ""
- #: gnu/packages/audio.scm:1742 gnu/packages/audio.scm:4497
- msgid "C++ wrapper around the ALSA API"
- msgstr ""
- #: gnu/packages/audio.scm:1744
- msgid ""
- "clalsadrv is a C++ wrapper around the ALSA API simplifying access to\n"
- "ALSA PCM devices."
- msgstr ""
- #: gnu/packages/audio.scm:1781
- msgid "LADSPA ambisonics plugins"
- msgstr ""
- #: gnu/packages/audio.scm:1783
- msgid ""
- "The AMB plugins are a set of LADSPA ambisonics plugins, mainly to be\n"
- "used within Ardour. Features include: mono and stereo to B-format panning,\n"
- "horizontal rotator, square, hexagon and cube decoders."
- msgstr ""
- #: gnu/packages/audio.scm:1818
- msgid "Chorus, phaser, and vintage high-pass and low-pass filters"
- msgstr ""
- #: gnu/packages/audio.scm:1820
- msgid ""
- "This package provides various LADSPA plugins. @code{cs_chorus} and\n"
- "@code{cs_phaser} provide chorus and phaser effects, respectively;\n"
- "@code{mvclpf24} provides four implementations of the low-pass filter used in\n"
- "vintage Moog synthesizers; @code{mvchpf24} is based on the voltage-controlled\n"
- "high-pass filter by Robert Moog. The filters attempt to accurately emulate\n"
- "the non-linear circuit elements of their original analog counterparts."
- msgstr ""
- #: gnu/packages/audio.scm:1858
- msgid "LADSPA reverb plugin"
- msgstr ""
- #: gnu/packages/audio.scm:1860
- msgid ""
- "This package provides a stereo reverb LADSPA plugin based on the\n"
- "well-known greverb."
- msgstr ""
- #: gnu/packages/audio.scm:1894
- msgid "LADSPA four-band parametric equalizer plugin"
- msgstr ""
- #: gnu/packages/audio.scm:1896
- msgid ""
- "This package provides a LADSPA plugin for a four-band parametric\n"
- "equalizer. Each section has an active/bypass switch, frequency, bandwidth and\n"
- "gain controls. There is also a global bypass switch and gain control.\n"
- "\n"
- "The 2nd order resonant filters are implemented using a Mitra-Regalia style\n"
- "lattice filter, which is stable even while parameters are being changed.\n"
- "\n"
- "All switches and controls are internally smoothed, so they can be used @code{live}\n"
- "without any clicks or zipper noises. This makes this plugin suitable for use\n"
- "in systems that allow automation of plugin control ports, such as Ardour, or\n"
- "for stage use."
- msgstr ""
- #: gnu/packages/audio.scm:1939
- msgid "LADSPA stereo width plugin"
- msgstr ""
- #: gnu/packages/audio.scm:1941
- msgid ""
- "This package provides a LADSPA plugin to manipulate the stereo width of\n"
- "audio signals."
- msgstr ""
- #: gnu/packages/audio.scm:1976
- msgid "LADSPA plugin for synthesizer oscillators"
- msgstr ""
- #: gnu/packages/audio.scm:1978
- msgid ""
- "The @code{blvco} LADSPA plugin provides three anti-aliased oscillators:\n"
- "\n"
- "@enumerate\n"
- "@item Pulse-VCO, a dirac pulse oscillator with flat amplitude spectrum\n"
- "@item Saw-VCO, a sawtooth oscillator with 1/F amplitude spectrum\n"
- "@item Rec-VCO, a square / rectangle oscillator\n"
- "@end enumerate\n"
- "\n"
- "\n"
- "All oscillators are low-pass filtered to provide waveforms similar to the\n"
- "output of analog synthesizers such as the Moog Voyager."
- msgstr ""
- #: gnu/packages/audio.scm:2020
- msgid "LADSPA Autowah effect plugin"
- msgstr ""
- #: gnu/packages/audio.scm:2022
- msgid ""
- "This package provides a LADSPA plugin for a Wah effect with envelope\n"
- "follower."
- msgstr ""
- #: gnu/packages/audio.scm:2056
- msgid "LADSPA stereo reverb plugin"
- msgstr ""
- #: gnu/packages/audio.scm:2058
- msgid "This package provides a LADSPA plugin for a stereo reverb effect."
- msgstr ""
- #: gnu/packages/audio.scm:2098
- msgid "SoundFont synthesizer"
- msgstr ""
- #: gnu/packages/audio.scm:2100
- msgid ""
- "FluidSynth is a real-time software synthesizer based on the SoundFont 2\n"
- "specifications. FluidSynth reads and handles MIDI events from the MIDI input\n"
- "device. It is the software analogue of a MIDI synthesizer. FluidSynth can\n"
- "also play midifiles using a Soundfont."
- msgstr ""
- #: gnu/packages/audio.scm:2121
- msgid "MPEG-4 and MPEG-2 AAC decoder"
- msgstr "MPEG-4와 MPEG-2 AAA 인코더"
- #: gnu/packages/audio.scm:2123
- msgid "FAAD2 is an MPEG-4 and MPEG-2 AAC decoder supporting LC, Main, LTP, SBR, -PS, and DAB+."
- msgstr ""
- #: gnu/packages/audio.scm:2162
- msgid "Signal processing language"
- msgstr ""
- #: gnu/packages/audio.scm:2164
- msgid "Faust is a programming language for realtime audio signal processing."
- msgstr ""
- #: gnu/packages/audio.scm:2274
- msgid "GUS compatible patches for MIDI players"
- msgstr ""
- #: gnu/packages/audio.scm:2276
- msgid ""
- "FreePats is a project to create a free and open set of GUS compatible\n"
- "patches that can be used with softsynths such as Timidity and WildMidi."
- msgstr ""
- #: gnu/packages/audio.scm:2318
- msgid "General MIDI sound set"
- msgstr ""
- #: gnu/packages/audio.scm:2319
- msgid ""
- "FreePats is a project to create a free (as in free software)\n"
- "collection of digital instruments for music production. This sound bank is a\n"
- "partial release of the General MIDI sound set."
- msgstr ""
- #: gnu/packages/audio.scm:2373
- msgid "Virtual guitar amplifier"
- msgstr ""
- #: gnu/packages/audio.scm:2374
- msgid ""
- "Guitarix is a virtual guitar amplifier running JACK.\n"
- "Guitarix takes the signal from your guitar as a mono-signal from your sound\n"
- "card. The input is processed by a main amp and a rack-section. Both can be\n"
- "routed separately and deliver a processed stereo-signal via JACK. You may\n"
- "fill the rack with effects from more than 25 built-in modules including stuff\n"
- "from a simple noise gate to modulation effects like flanger, phaser or\n"
- "auto-wah."
- msgstr ""
- #: gnu/packages/audio.scm:2428
- msgid "Audio effects processor"
- msgstr ""
- #: gnu/packages/audio.scm:2430
- msgid ""
- "Rakarrack is a richly featured multi-effects processor emulating a\n"
- "guitar effects pedalboard. Effects include compressor, expander, noise gate,\n"
- "equalizers, exciter, flangers, chorus, various delay and reverb effects,\n"
- "distortion modules and many more. Most of the effects engine is built from\n"
- "modules found in the excellent software synthesizer ZynAddSubFX. Presets and\n"
- "user interface are optimized for guitar, but Rakarrack processes signals in\n"
- "stereo while it does not apply internal band-limiting filtering, and thus is\n"
- "well suited to all musical instruments and vocals."
- msgstr ""
- #: gnu/packages/audio.scm:2484
- msgid "LV2 convolution reverb"
- msgstr ""
- #: gnu/packages/audio.scm:2486
- msgid ""
- "IR is a low-latency, real-time, high performance signal convolver\n"
- "especially for creating reverb effects. It supports impulse responses with 1,\n"
- "2 or 4 channels, in any soundfile format supported by libsndfile."
- msgstr ""
- #: gnu/packages/audio.scm:2526
- msgid "JACK audio connection kit"
- msgstr ""
- #: gnu/packages/audio.scm:2528
- msgid ""
- "JACK is a low-latency audio server. It can connect a number of\n"
- "different applications to an audio device, as well as allowing them to share\n"
- "audio between themselves. JACK is different from other audio server efforts\n"
- "in that it has been designed from the ground up to be suitable for\n"
- "professional audio work. This means that it focuses on two key areas:\n"
- "synchronous execution of all clients, and low latency operation."
- msgstr ""
- #: gnu/packages/audio.scm:2614
- msgid "Tools for JACK connections"
- msgstr ""
- #: gnu/packages/audio.scm:2615
- msgid ""
- "This package provides tools for managing JACK connections\n"
- "and testing or configuring the JACK session. Tools include @code{jack_lsp},\n"
- "@code{jack_connect}, and @code{jack_transport}."
- msgstr ""
- #: gnu/packages/audio.scm:2656
- msgid "Multi-machine audio system for network music performance"
- msgstr ""
- #: gnu/packages/audio.scm:2658
- msgid ""
- "JackTrip is a multi-machine audio system used for network music\n"
- "performance over the Internet. It supports any number of channels (as many as\n"
- "the computer/network can handle) of bidirectional, high quality, uncompressed\n"
- "audio signal streaming."
- msgstr ""
- #: gnu/packages/audio.scm:2697
- msgid "Simple LV2 host for JACK"
- msgstr ""
- #: gnu/packages/audio.scm:2699
- msgid ""
- "Jalv is a simple but fully featured LV2 host for JACK. It runs LV2\n"
- "plugins and exposes their ports as JACK ports, essentially making any LV2\n"
- "plugin function as a JACK application."
- msgstr ""
- #: gnu/packages/audio.scm:2743
- msgid "Linux Audio Developer's Simple Plugin API (LADSPA)"
- msgstr ""
- #: gnu/packages/audio.scm:2745
- msgid ""
- "LADSPA is a standard that allows software audio processors and effects\n"
- "to be plugged into a wide range of audio synthesis and recording packages."
- msgstr ""
- #: gnu/packages/audio.scm:2795
- msgid "Audio application session manager"
- msgstr ""
- #: gnu/packages/audio.scm:2797
- msgid ""
- "LASH is a session management system for audio applications. It allows\n"
- "you to save and restore audio sessions consisting of multiple interconneced\n"
- "applications, restoring program state (i.e. loaded patches) and the\n"
- "connections between them."
- msgstr ""
- #: gnu/packages/audio.scm:2818
- msgid "Bauer stereophonic-to-binaural DSP"
- msgstr ""
- #: gnu/packages/audio.scm:2820
- msgid ""
- "The Bauer stereophonic-to-binaural DSP (bs2b) library and plugins is\n"
- "designed to improve headphone listening of stereo audio records. Recommended\n"
- "for headphone prolonged listening to disable superstereo fatigue without\n"
- "essential distortions."
- msgstr ""
- #: gnu/packages/audio.scm:2842
- msgid "Bauer stereophonic-to-binaural DSP - LADSPA plugin"
- msgstr ""
- #: gnu/packages/audio.scm:2843
- msgid ""
- "The Bauer stereophonic-to-binaural DSP (bs2b) library and\n"
- "plugins is designed to improve headphone listening of stereo audio records.\n"
- "Recommended for headphone prolonged listening to disable superstereo fatigue\n"
- "without essential distortions. This package contains a LADSPA plugin for use\n"
- "with applications that support them (e.g. PulseAudio)."
- msgstr ""
- #: gnu/packages/audio.scm:2867
- msgid "Implementation of the Open Sound Control protocol"
- msgstr ""
- #: gnu/packages/audio.scm:2869
- msgid ""
- "liblo is a lightweight library that provides an easy to use\n"
- "implementation of the Open Sound Control (@dfn{OSC}) protocol."
- msgstr ""
- #: gnu/packages/audio.scm:2903
- msgid "Common API for real-time audio I/O"
- msgstr ""
- #: gnu/packages/audio.scm:2905
- msgid ""
- "RtAudio is a set of C++ classes that provides a common API for real-time\n"
- "audio input/output. It was designed with the following objectives:\n"
- "\n"
- "@itemize\n"
- "@item object-oriented C++ design\n"
- "@item simple, common API across all supported platforms\n"
- "@item only one source and one header file for easy inclusion in programming\n"
- "projects\n"
- "@item allow simultaneous multi-api support\n"
- "@item support dynamic connection of devices\n"
- "@item provide extensive audio device parameter control\n"
- "@item allow audio device capability probing\n"
- "@item automatic internal conversion for data format, channel number\n"
- "compensation, (de)interleaving, and byte-swapping\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/audio.scm:2939
- msgid "Bindings for PortAudio v19"
- msgstr ""
- #: gnu/packages/audio.scm:2940
- msgid ""
- "This package provides bindings for PortAudio v19, the\n"
- "cross-platform audio input/output stream library."
- msgstr ""
- #: gnu/packages/audio.scm:2967
- msgid "Python bindings for mixer-like controls in PulseAudio"
- msgstr ""
- #: gnu/packages/audio.scm:2969
- msgid ""
- "This package provides a Python high-level interface and ctypes-based\n"
- "bindings for PulseAudio (libpulse), to use in simple synchronous code.\n"
- "This wrapper is mostly for mixer-like controls and introspection-related\n"
- "operations, as opposed to e.g. submitting sound samples to play and\n"
- "player-like clients."
- msgstr ""
- #: gnu/packages/audio.scm:2994
- msgid "Python bindings for liblo"
- msgstr ""
- #: gnu/packages/audio.scm:2996
- msgid ""
- "Pyliblo is a Python wrapper for the liblo Open Sound Control (OSC)\n"
- "library. It supports almost the complete functionality of liblo, allowing you\n"
- "to send and receive OSC messages using a nice and simple Python API. Also\n"
- "included are the command line utilities @code{send_osc} and @code{dump_osc}."
- msgstr ""
- #: gnu/packages/audio.scm:3029
- msgid "Python bindings for libsndfile"
- msgstr ""
- #: gnu/packages/audio.scm:3030
- msgid ""
- "This package provides python bindings for libsndfile based on\n"
- "CFFI and NumPy."
- msgstr ""
- #: gnu/packages/audio.scm:3047
- msgid "Python MIDI API"
- msgstr ""
- #: gnu/packages/audio.scm:3048
- msgid ""
- "This package provides a python API to read and write MIDI\n"
- "files."
- msgstr ""
- "이 꾸러미는 파이썬 API를 미디 파일 읽기와 쓰기는데\n"
- "제공합니다."
- #: gnu/packages/audio.scm:3084
- msgid "Convert audio to multichannel MIDI"
- msgstr ""
- #: gnu/packages/audio.scm:3085
- msgid ""
- "@command{audio-to-midi} converts audio files to multichannel\n"
- "MIDI files. It accomplishes this by performing FFTs on all channels of the\n"
- "audio data at user-specified time steps. It then separates the resulting\n"
- "frequency analysis into equivalence classes which correspond to the twelve tone\n"
- "scale; the volume of each class being the average volume of its constituent\n"
- "frequencies. This data is then formatted to MIDI and written to disk."
- msgstr ""
- #: gnu/packages/audio.scm:3126
- msgid "Library to simplify use of LV2 plugins in applications"
- msgstr ""
- #: gnu/packages/audio.scm:3128
- msgid ""
- "Lilv is a C library to make the use of LV2 plugins as simple as possible\n"
- "for applications. Lilv is the successor to SLV2, rewritten to be\n"
- "significantly faster and have minimal dependencies."
- msgstr ""
- #: gnu/packages/audio.scm:3154
- msgid "LV2 audio plugin specification"
- msgstr ""
- #: gnu/packages/audio.scm:3156
- msgid ""
- "LV2 is an open specification for audio plugins and host applications.\n"
- "At its core, LV2 is a simple stable interface, accompanied by extensions which\n"
- "add functionality to support the needs of increasingly powerful audio\n"
- "software."
- msgstr ""
- #: gnu/packages/audio.scm:3188
- msgid "Turtle to C header conversion utility for LV2 plugins"
- msgstr ""
- #: gnu/packages/audio.scm:3190
- msgid ""
- "This package provides a conversion utility for LV2 Plugin developers to\n"
- "generate C headers from Turtle files."
- msgstr ""
- #: gnu/packages/audio.scm:3223
- msgid "LV2 port of the mda Piano plugin"
- msgstr "mda Piano 플러그인의 LV2 포트"
- #: gnu/packages/audio.scm:3224
- msgid "An LV2 port of the mda Piano VSTi."
- msgstr "mda Piano VSTi의 LV2 포트."
- #: gnu/packages/audio.scm:3237
- msgid "LV2 port of the mda EPiano plugin"
- msgstr "mda EPiano 플러그인의 LV2 포트"
- #: gnu/packages/audio.scm:3238
- msgid "An LV2 port of the mda EPiano VSTi."
- msgstr "mda EPiano VSTi의 VL2 포트."
- #: gnu/packages/audio.scm:3262 gnu/packages/audio.scm:3303
- msgid "C++ libraries for LV2 plugins"
- msgstr ""
- #: gnu/packages/audio.scm:3264 gnu/packages/audio.scm:3305
- msgid ""
- "The LV2 Toolkit (LVTK) contains libraries that wrap the LV2 C API and\n"
- "extensions into easy to use C++ classes. It is the successor of\n"
- "lv2-c++-tools."
- msgstr ""
- #: gnu/packages/audio.scm:3347
- msgid "3D audio API"
- msgstr ""
- #: gnu/packages/audio.scm:3349
- msgid ""
- "OpenAL provides capabilities for playing audio in a virtual 3D\n"
- "environment. Distance attenuation, doppler shift, and directional sound\n"
- "emitters are among the features handled by the API. More advanced effects,\n"
- "including air absorption, occlusion, and environmental reverb, are available\n"
- "through the EFX extension. It also facilitates streaming audio, multi-channel\n"
- "buffers, and audio capture."
- msgstr ""
- #: gnu/packages/audio.scm:3381
- msgid "Free implementation of OpenAL's ALUT standard"
- msgstr ""
- #: gnu/packages/audio.scm:3382
- msgid "freealut is the OpenAL Utility Toolkit."
- msgstr "freealut는 OpenAL 유틸리티 툴킷입니다."
- #: gnu/packages/audio.scm:3412
- msgid "Modular patch bay for audio and MIDI systems"
- msgstr ""
- #: gnu/packages/audio.scm:3414
- msgid ""
- "Patchage is a modular patch bay for audio and MIDI systems based on JACK\n"
- "and ALSA."
- msgstr ""
- #: gnu/packages/audio.scm:3437
- msgid "Portable C audio library"
- msgstr ""
- #: gnu/packages/audio.scm:3439
- msgid ""
- "The Portable C Audio Library (pcaudiolib) provides a C@tie{}API to\n"
- "different audio devices such as ALSA or PulseAudio."
- msgstr ""
- #: gnu/packages/audio.scm:3469
- msgid "Jack server control application"
- msgstr ""
- #: gnu/packages/audio.scm:3470
- msgid ""
- "Control a Jack server. Allows you to plug various sources\n"
- "into various outputs and to start, stop and configure jackd"
- msgstr ""
- #: gnu/packages/audio.scm:3501
- msgid "Stereo audio recorder for JACK"
- msgstr ""
- #: gnu/packages/audio.scm:3502
- msgid ""
- "QJackRcd is a simple graphical stereo recorder for JACK\n"
- "supporting silence processing for automatic pause, file splitting, and\n"
- "background file post-processing."
- msgstr ""
- #: gnu/packages/audio.scm:3609
- msgid "Synthesis engine and programming language"
- msgstr ""
- #: gnu/packages/audio.scm:3610
- msgid ""
- "SuperCollider is a synthesis engine (@code{scsynth} or\n"
- "@code{supernova}) and programming language (@code{sclang}). It can be used\n"
- "for experimenting with sound synthesis and algorithmic composition.\n"
- "\n"
- "SuperCollider requires jackd to be installed in your user profile and your\n"
- "user must be allowed to access the realtime features of the kernel. Search\n"
- "for \"realtime\" in the index of the Guix manual to learn how to achieve this\n"
- "using Guix System."
- msgstr ""
- #: gnu/packages/audio.scm:3637
- msgid "Broadcast streaming library with IDJC extensions"
- msgstr ""
- #: gnu/packages/audio.scm:3638
- msgid "This package provides libshout plus IDJC extensions."
- msgstr "이 꾸러미는 IDJC 확장을 추가한 libshout를 제공합니다."
- #: gnu/packages/audio.scm:3656
- msgid "Sampling rate conversion and filter design utilities"
- msgstr ""
- #: gnu/packages/audio.scm:3657
- msgid ""
- "This package contains the @command{resample} and\n"
- "@command{windowfilter} command line utilities. The @command{resample} command\n"
- "allows changing the sampling rate of a sound file, while the\n"
- "@command{windowfilter} command allows designing Finite Impulse Response (FIR)\n"
- "filters using the so-called @emph{window method}."
- msgstr ""
- #: gnu/packages/audio.scm:3696
- msgid "Audio time-stretching and pitch-shifting library"
- msgstr ""
- #: gnu/packages/audio.scm:3698
- msgid ""
- "Rubber Band is a library and utility program that permits changing the\n"
- "tempo and pitch of an audio recording independently of one another."
- msgstr ""
- #: gnu/packages/audio.scm:3720
- msgid "Cross-platform MIDI library for C++"
- msgstr ""
- #: gnu/packages/audio.scm:3722
- msgid ""
- "RtMidi is a set of C++ classes (RtMidiIn, RtMidiOut, and API specific\n"
- "classes) that provide a common cross-platform API for realtime MIDI\n"
- "input/output."
- msgstr ""
- #: gnu/packages/audio.scm:3759
- msgid "Library for serialising LV2 atoms to/from RDF"
- msgstr ""
- #: gnu/packages/audio.scm:3761
- msgid ""
- "Sratom is a library for serialising LV2 atoms to/from RDF, particularly\n"
- "the Turtle syntax."
- msgstr ""
- #: gnu/packages/audio.scm:3787
- msgid "Library for loading and wrapping LV2 plugin UIs"
- msgstr ""
- #: gnu/packages/audio.scm:3789
- msgid ""
- "Suil is a lightweight C library for loading and wrapping LV2 plugin UIs.\n"
- "\n"
- "Suil makes it possible to load a UI of a toolkit in a host using another\n"
- "toolkit. The API is designed such that hosts do not need to explicitly\n"
- "support specific toolkits – if Suil supports a particular toolkit, then UIs in\n"
- "that toolkit will work in all hosts that use Suil automatically.\n"
- "\n"
- "Suil currently supports every combination of Gtk, Qt, and X11."
- msgstr ""
- #: gnu/packages/audio.scm:3819
- msgid "Library implementing the EBU R 128 loudness standard"
- msgstr ""
- #: gnu/packages/audio.scm:3821
- msgid ""
- "@code{libebur128} is a C library that implements the EBU R 128 standard\n"
- "for loudness normalisation."
- msgstr ""
- #: gnu/packages/audio.scm:3873
- msgid "Software synthesizer for playing MIDI files"
- msgstr ""
- #: gnu/packages/audio.scm:3875
- msgid ""
- "TiMidity++ is a software synthesizer. It can play MIDI files by\n"
- "converting them into PCM waveform data; give it a MIDI data along with digital\n"
- "instrument data files, then it synthesizes them in real-time, and plays. It\n"
- "can not only play sounds, but also can save the generated waveforms into hard\n"
- "disks as various audio file formats."
- msgstr ""
- #: gnu/packages/audio.scm:3913
- msgid "Modular and extensible audio processing system"
- msgstr ""
- #: gnu/packages/audio.scm:3915
- msgid ""
- "Vamp is an audio processing plugin system for plugins that extract\n"
- "descriptive information from audio data — typically referred to as audio\n"
- "analysis plugins or audio feature extraction plugins."
- msgstr ""
- #: gnu/packages/audio.scm:3958
- msgid "Library for time stretching and pitch scaling of audio"
- msgstr ""
- #: gnu/packages/audio.scm:3960
- msgid ""
- "SBSMS (Subband Sinusoidal Modeling Synthesis) is software for time\n"
- "stretching and pitch scaling of audio. This package contains the library."
- msgstr ""
- #: gnu/packages/audio.scm:3985
- msgid "Musical key detection for digital audio"
- msgstr ""
- #: gnu/packages/audio.scm:3987
- msgid ""
- "@code{libkeyfinder} is a small C++11 library for estimating the musical\n"
- "key of digital audio."
- msgstr ""
- #: gnu/packages/audio.scm:4015
- msgid "Hybrid lossless audio codec"
- msgstr ""
- #: gnu/packages/audio.scm:4017
- msgid ""
- "WavPack is an audio compression format with lossless, lossy and hybrid\n"
- "compression modes. This package contains command-line programs and library to\n"
- "encode and decode wavpack files."
- msgstr ""
- #: gnu/packages/audio.scm:4036
- msgid "Mod file playing library"
- msgstr ""
- #: gnu/packages/audio.scm:4038
- msgid ""
- "Libmodplug renders mod music files as raw audio data, for playing or\n"
- "conversion. mod, .s3m, .it, .xm, and a number of lesser-known formats are\n"
- "supported. Optional features include high-quality resampling, bass expansion,\n"
- "surround and reverb."
- msgstr ""
- #: gnu/packages/audio.scm:4057
- msgid "Module player library"
- msgstr ""
- #: gnu/packages/audio.scm:4059
- msgid ""
- "Libxmp is a library that renders module files to PCM data. It supports\n"
- "over 90 mainstream and obscure module formats including Protracker (MOD),\n"
- "Scream Tracker 3 (S3M), Fast Tracker II (XM), and Impulse Tracker (IT)."
- msgstr ""
- #: gnu/packages/audio.scm:4081
- msgid "Extended module player"
- msgstr ""
- #: gnu/packages/audio.scm:4083
- msgid ""
- "Xmp is a portable module player that plays over 90 mainstream and\n"
- "obscure module formats, including Protracker MOD, Fasttracker II XM, Scream\n"
- "Tracker 3 S3M and Impulse Tracker IT files."
- msgstr ""
- #: gnu/packages/audio.scm:4106
- msgid "Audio processing library for changing tempo, pitch and playback rate"
- msgstr ""
- #: gnu/packages/audio.scm:4108
- msgid ""
- "SoundTouch is an audio processing library for changing the tempo, pitch\n"
- "and playback rates of audio streams or audio files. It is intended for\n"
- "application developers writing sound processing tools that require tempo/pitch\n"
- "control functionality, or just for playing around with the sound effects."
- msgstr ""
- #: gnu/packages/audio.scm:4145
- msgid "Sound processing utility"
- msgstr ""
- #: gnu/packages/audio.scm:4147
- msgid ""
- "SoX (Sound eXchange) is a command line utility that can convert\n"
- "various formats of computer audio files to other formats. It can also\n"
- "apply various effects to these sound files, and, as an added bonus, SoX\n"
- "can play and record audio files."
- msgstr ""
- #: gnu/packages/audio.scm:4170
- msgid "One-dimensional sample-rate conversion library"
- msgstr ""
- #: gnu/packages/audio.scm:4172
- msgid ""
- "The SoX Resampler library (libsoxr) performs one-dimensional sample-rate\n"
- "conversion. It may be used, for example, to resample PCM-encoded audio."
- msgstr ""
- #: gnu/packages/audio.scm:4193
- msgid "MPEG Audio Layer 2 (MP2) encoder"
- msgstr ""
- #: gnu/packages/audio.scm:4195
- msgid ""
- "TwoLAME is an optimised MPEG Audio Layer 2 (MP2) encoder based on\n"
- "tooLAME by Mike Cheng, which in turn is based upon the ISO dist10 code and\n"
- "portions of LAME."
- msgstr ""
- #: gnu/packages/audio.scm:4249
- msgid "Audio I/O library"
- msgstr ""
- #: gnu/packages/audio.scm:4251
- msgid ""
- "PortAudio is a portable C/C++ audio I/O library providing a simple API\n"
- "to record and/or play sound using a callback function or a blocking read/write\n"
- "interface."
- msgstr ""
- #: gnu/packages/audio.scm:4278
- msgid "Graphical user interface for FluidSynth"
- msgstr "FluidSynth를 위한 그래픽 사용자 연결장치"
- #: gnu/packages/audio.scm:4280
- msgid ""
- "Qsynth is a GUI front-end application for the FluidSynth SoundFont\n"
- "synthesizer written in C++."
- msgstr ""
- #: gnu/packages/audio.scm:4317
- msgid "Networked audio system"
- msgstr ""
- #: gnu/packages/audio.scm:4319
- msgid ""
- "RSound allows you to send audio from an application and transfer it\n"
- "directly to a different computer on your LAN network. It is an audio daemon\n"
- "with a much different focus than most other audio daemons."
- msgstr ""
- #: gnu/packages/audio.scm:4347
- msgid "JACK audio frequency analyzer and display"
- msgstr ""
- #: gnu/packages/audio.scm:4349
- msgid ""
- "XJackFreak is an audio analysis and equalizing tool for the Jack Audio\n"
- "Connection Kit. It can display the FFT of any input, modify it and output the\n"
- "result."
- msgstr ""
- #: gnu/packages/audio.scm:4399
- msgid "Fast, partitioned convolution engine library"
- msgstr ""
- #: gnu/packages/audio.scm:4401
- msgid ""
- "Zita convolver is a C++ library providing a real-time convolution\n"
- "engine."
- msgstr ""
- #: gnu/packages/audio.scm:4451
- msgid "C++ library for resampling audio signals"
- msgstr ""
- #: gnu/packages/audio.scm:4453
- msgid ""
- "Libzita-resampler is a C++ library for resampling audio signals. It is\n"
- "designed to be used within a real-time processing context, to be fast, and to\n"
- "provide high-quality sample rate conversion."
- msgstr ""
- #: gnu/packages/audio.scm:4499
- msgid ""
- "Zita-alsa-pcmi is a C++ wrapper around the ALSA API. It provides easy\n"
- "access to ALSA PCM devices, taking care of the many functions required to\n"
- "open, initialise and use a hw: device in mmap mode, and providing floating\n"
- "point audio data."
- msgstr ""
- #: gnu/packages/audio.scm:4522
- msgid "Cue and toc file parsers and utilities"
- msgstr ""
- #: gnu/packages/audio.scm:4523
- msgid ""
- "Cuetools is a set of programs that are useful for manipulating\n"
- "and using CUE sheet (cue) files and Table of Contents (toc) files. CUE and TOC\n"
- "files are a way to represent the layout of a data or audio CD in a\n"
- "machine-readable ASCII format."
- msgstr ""
- #: gnu/packages/audio.scm:4551
- msgid "Analyze MPEG layer I/II/III files"
- msgstr ""
- #: gnu/packages/audio.scm:4552
- msgid ""
- "mp3guessenc is a command line utility that tries to detect the\n"
- "encoder used for an MPEG Layer III (MP3) file, as well as scan any MPEG audio\n"
- "file (any layer) and print a lot of useful information."
- msgstr ""
- #: gnu/packages/audio.scm:4572
- msgid "WAVE audio data processing tool"
- msgstr ""
- #: gnu/packages/audio.scm:4573
- msgid ""
- "shntool is a multi-purpose WAVE data processing and reporting\n"
- "utility. File formats are abstracted from its core, so it can process any file\n"
- "that contains WAVE data, compressed or not---provided there exists a format\n"
- "module to handle that particular file type. It can also generate CUE files, and\n"
- "use them split WAVE data into multiple files."
- msgstr ""
- #: gnu/packages/audio.scm:4612
- msgid "DTS Coherent Acoustics decoder"
- msgstr ""
- #: gnu/packages/audio.scm:4613
- msgid ""
- "Dcadec is a DTS Coherent Acoustics surround sound decoder\n"
- "with support for HD extensions."
- msgstr ""
- #: gnu/packages/audio.scm:4642
- msgid "Digital room correction"
- msgstr ""
- #: gnu/packages/audio.scm:4644
- msgid ""
- "DRC is a program used to generate correction filters for acoustic\n"
- "compensation of HiFi and audio systems in general, including listening room\n"
- "compensation. DRC generates just the FIR correction filters, which can be\n"
- "used with a real time or offline convolver to provide real time or offline\n"
- "correction. DRC doesn't provide convolution features, and provides only some\n"
- "simplified, although really accurate, measuring tools."
- msgstr ""
- #: gnu/packages/audio.scm:4682
- msgid "Tool to adjust loudness of media files"
- msgstr ""
- #: gnu/packages/audio.scm:4684
- msgid ""
- "BS1770GAIN is a loudness scanner compliant with ITU-R BS.1770 and its\n"
- "flavors EBU R128, ATSC A/85, and ReplayGain 2.0. It helps normalizing the\n"
- "loudness of audio and video files to the same level."
- msgstr ""
- #: gnu/packages/audio.scm:4715
- msgid "Lightweight audio filtering library"
- msgstr ""
- #: gnu/packages/audio.scm:4716
- msgid ""
- "An easy to use audio filtering library made from webrtc\n"
- "code, used in @code{libtoxcore}."
- msgstr ""
- #: gnu/packages/audio.scm:4764
- msgid "GSM 06.10 lossy speech compression library"
- msgstr ""
- #: gnu/packages/audio.scm:4765
- msgid ""
- "This C library provides an encoder and a decoder for the GSM\n"
- "06.10 RPE-LTP lossy speech compression algorithm."
- msgstr ""
- #: gnu/packages/audio.scm:4786
- msgid "ALSA wrappers for Python"
- msgstr ""
- #: gnu/packages/audio.scm:4788
- msgid ""
- "This package contains wrappers for accessing the ALSA API from Python.\n"
- "It is currently fairly complete for PCM devices, and has some support for\n"
- "mixers."
- msgstr ""
- #: gnu/packages/audio.scm:4808
- msgid "LDAC Bluetooth encoder and ABR library"
- msgstr ""
- #: gnu/packages/audio.scm:4809
- msgid ""
- "This package provides an encoder for the LDAC\n"
- "high-resolution Bluetooth audio streaming codec for streaming at up to 990\n"
- "kbps at 24 bit/96 kHz."
- msgstr ""
- #: gnu/packages/audio.scm:4852
- msgid "Bluetooth ALSA backend"
- msgstr ""
- #: gnu/packages/audio.scm:4853
- msgid ""
- "This project is a rebirth of a direct integration between\n"
- "Bluez and ALSA. Since Bluez >= 5, the built-in integration has been removed\n"
- "in favor of 3rd party audio applications. From now on, Bluez acts as a\n"
- "middleware between an audio application, which implements Bluetooth audio\n"
- "profile, and a Bluetooth audio device. BlueALSA registers all known Bluetooth\n"
- "audio profiles in Bluez, so in theory every Bluetooth device (with audio\n"
- "capabilities) can be connected. In order to access the audio stream, one has\n"
- "to connect to the ALSA PCM device called @code{bluealsa}. The device is based\n"
- "on the ALSA software PCM plugin."
- msgstr ""
- #: gnu/packages/audio.scm:4916
- msgid "Sound editor"
- msgstr ""
- #: gnu/packages/audio.scm:4919
- msgid ""
- "Snd is a sound editor modelled loosely after Emacs. It can be\n"
- "customized and extended using either the s7 Scheme implementation (included in\n"
- "the Snd sources), Ruby, or Forth."
- msgstr ""
- #: gnu/packages/audio.scm:4947
- msgid "LV2 plugin for broadband noise reduction"
- msgstr ""
- #: gnu/packages/audio.scm:4948
- msgid ""
- "Noise Repellent is an LV2 plugin to reduce noise. It has\n"
- "the following features:\n"
- "\n"
- "@enumerate\n"
- "@item Spectral gating and spectral subtraction suppression rule\n"
- "@item Adaptive and manual noise thresholds estimation\n"
- "@item Adjustable noise floor\n"
- "@item Adjustable offset of thresholds to perform over-subtraction\n"
- "@item Time smoothing and a masking estimation to reduce artifacts\n"
- "@item Basic onset detector to avoid transients suppression\n"
- "@item Whitening of the noise floor to mask artifacts and to recover higher\n"
- " frequencies\n"
- "@item Option to listen to the residual signal\n"
- "@item Soft bypass\n"
- "@item Noise profile saved with the session\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/audio.scm:5014
- msgid "Speech denoise LV2 plugin based on Xiph's RNNoise library"
- msgstr ""
- #: gnu/packages/audio.scm:5015
- msgid ""
- "RNNoise is a library that uses deep learning to apply\n"
- "noise suppression to audio sources with voice presence. This package provides\n"
- "an LV2 audio plugin."
- msgstr ""
- #: gnu/packages/audio.scm:5058
- msgid "Command-line audio visualizer"
- msgstr ""
- #: gnu/packages/audio.scm:5059
- msgid ""
- "@code{cli-visualizer} displays fast-Fourier\n"
- "transforms (FFTs) of the sound being played, as well as other graphical\n"
- "representations."
- msgstr ""
- #: gnu/packages/audio.scm:5107
- msgid "Console audio visualizer for ALSA, MPD, and PulseAudio"
- msgstr ""
- #: gnu/packages/audio.scm:5108
- msgid ""
- "C.A.V.A. is a bar audio spectrum visualizer for the terminal\n"
- "using ALSA, MPD, PulseAudio, or a FIFO buffer as its input."
- msgstr ""
- #: gnu/packages/audio.scm:5141
- msgid "Pro-quality GM soundfont"
- msgstr ""
- #: gnu/packages/audio.scm:5142
- msgid "Fluid-3 is Frank Wen's pro-quality GM soundfont."
- msgstr ""
- #: gnu/packages/audio.scm:5163
- msgid "Fraunhofer FDK AAC library"
- msgstr ""
- #: gnu/packages/audio.scm:5164
- msgid ""
- "FDK is a library for encoding and decoding Advanced Audio\n"
- "Coding (AAC) format audio, developed by Fraunhofer IIS, and included as part of\n"
- "Android. It supports several Audio Object Types including MPEG-2 and MPEG-4 AAC\n"
- "LC, HE-AAC (AAC LC + SBR), HE-AACv2 (LC + SBR + PS) as well AAC-LD (low delay)\n"
- "and AAC-ELD (enhanced low delay) for real-time communication. The encoding\n"
- "library supports sample rates up to 96 kHz and up to eight channels (7.1\n"
- " surround)."
- msgstr ""
- #: gnu/packages/audio.scm:5199
- msgid "aptX codec library"
- msgstr ""
- #: gnu/packages/audio.scm:5200
- msgid ""
- "libfreeaptx is an implementation of the Audio Processing\n"
- "Technology codecs aptX and aptX HD, mainly intended for use with an A2DP\n"
- "bluetooth profile."
- msgstr ""
- #: gnu/packages/audio.scm:5234
- msgid "Audio editing and playback for OpenShot"
- msgstr ""
- #: gnu/packages/audio.scm:5235
- msgid ""
- "OpenShot Audio Library (libopenshot-audio) allows\n"
- "high-quality editing and playback of audio, and is based on the JUCE\n"
- "library."
- msgstr ""
- #: gnu/packages/audio.scm:5260
- msgid "XAudio reimplementation"
- msgstr ""
- #: gnu/packages/audio.scm:5261
- msgid ""
- "FAudio is an XAudio reimplementation that focuses solely on\n"
- "developing fully accurate DirectX Audio runtime libraries."
- msgstr ""
- #: gnu/packages/audio.scm:5287
- msgid "Binaural beat synthesizer"
- msgstr ""
- #: gnu/packages/audio.scm:5288
- msgid ""
- "Gnaural is a programmable auditory binaural beat synthesizer\n"
- "intended to be used for brainwave entrainment. Gnaural supports creation of\n"
- "binaural beat tracks of different frequencies and exporting of tracks into\n"
- "different audio formats. Gnaural can also be linked over the internet with\n"
- "other Gnaural instances, allowing synchronous sessions between many users."
- msgstr ""
- #: gnu/packages/audio.scm:5322
- msgid "Live audio streamer"
- msgstr ""
- #: gnu/packages/audio.scm:5323
- msgid ""
- "DarkIce is a live audio streamer. It takes audio input from\n"
- "a sound card, encodes it into Ogg Vorbis and/or mp3, and sends the audio\n"
- "stream to one or more IceCast and/or ShoutCast servers."
- msgstr ""
- #: gnu/packages/audio.scm:5345
- msgid "Encode or decode Linear/Longitudinal Time Code (LTC) audio"
- msgstr ""
- #: gnu/packages/audio.scm:5346
- msgid ""
- "Libltc is a POSIX-C Library for handling\n"
- "@dfn{Linear/Longitudinal Time Code} (LTC) data."
- msgstr ""
- #: gnu/packages/audio.scm:5378
- msgid "TTA lossless audio encoder"
- msgstr ""
- #: gnu/packages/audio.scm:5380
- msgid ""
- "TTA performs lossless compression on multichannel 8,16 and 24 bits\n"
- "data of the Wav audio files. Being lossless means that no data-\n"
- "quality is lost in the compression - when uncompressed, the data will\n"
- "be identical to the original. The compression ratios of TTA depend on\n"
- "the type of music file being compressed, but the compression size\n"
- "will generally range between 30% - 70% of the original. TTA format\n"
- "supports both of ID3v1/v2 and APEv2 tags."
- msgstr ""
- #: gnu/packages/audio.scm:5412
- msgid "C library for real-time audio input and output"
- msgstr ""
- #: gnu/packages/audio.scm:5413
- msgid ""
- "@code{libsoundio} is a C library providing audio input and\n"
- "output. The API is suitable for real-time software such as digital audio\n"
- "workstations as well as consumer software such as music players."
- msgstr ""
- #: gnu/packages/audio.scm:5438
- msgid "Small GUI toolkit"
- msgstr ""
- #: gnu/packages/audio.scm:5439
- msgid ""
- "Redkite is a small GUI toolkit developed in C++17 and\n"
- "inspired from other well known GUI toolkits such as Qt and GTK. It is\n"
- "minimal on purpose and is intended to be statically linked to applications,\n"
- "therefore satisfying any requirements they may have to be self contained,\n"
- "as is the case with audio plugins."
- msgstr ""
- #: gnu/packages/audio.scm:5507
- msgid "Audio plugin host"
- msgstr ""
- #: gnu/packages/audio.scm:5508
- msgid ""
- "Carla is a modular audio plugin host, with features like\n"
- "transport control, automation of parameters via MIDI CC and remote control\n"
- "over OSC. Carla currently supports LADSPA (including LRDF), DSSI, LV2, VST2,\n"
- "and VST3 plugin formats, plus SF2 and SFZ file support. It uses JACK as the\n"
- "default and preferred audio driver but also supports native drivers like ALSA."
- msgstr ""
- #: gnu/packages/audio.scm:5543
- msgid "Multitrack audio processing"
- msgstr ""
- #: gnu/packages/audio.scm:5544
- msgid ""
- "Ecasound is a software package designed for multitrack audio\n"
- "processing. It can be used for simple tasks like audio playback, recording and\n"
- "format conversions, as well as for multitrack effect processing, mixing,\n"
- "recording and signal recycling. Ecasound supports a wide range of audio inputs,\n"
- "outputs and effect algorithms. Effects and audio objects can be combined in\n"
- "various ways, and their parameters can be controlled by operator objects like\n"
- "oscillators and MIDI-CCs. A versatile console mode user-interface is included\n"
- "in the package."
- msgstr ""
- #: gnu/packages/audio.scm:5581
- msgid "Library for reading and resampling audio files"
- msgstr ""
- #: gnu/packages/audio.scm:5582
- msgid ""
- "libaudec is a wrapper library over ffmpeg, sndfile and\n"
- "libsamplerate for reading and resampling audio files, based on Robin Gareus'\n"
- "@code{audio_decoder} code."
- msgstr ""
- #: gnu/packages/audio.scm:5611
- msgid "LV2 plugin lint tool"
- msgstr ""
- #: gnu/packages/audio.scm:5612
- msgid ""
- "lv2lint is an LV2 lint-like tool that checks whether a\n"
- "given plugin and its UI(s) match up with the provided metadata and adhere\n"
- "to well-known best practices."
- msgstr ""
- #: gnu/packages/audio.scm:5644
- msgid "Documentation generator for LV2 plugins"
- msgstr ""
- #: gnu/packages/audio.scm:5646
- msgid ""
- "lv2toweb allows the user to create an xhtml page with information\n"
- "about the given LV2 plugin, provided that the plugin and its UI(s) match up\n"
- "with the provided metadata and adhere to well-known best practices."
- msgstr ""
- #: gnu/packages/audio.scm:5673
- msgid "GUI toolkit for LV2 plugins"
- msgstr ""
- #: gnu/packages/audio.scm:5674
- msgid ""
- "ZToolkit (Ztk) is a cross-platform GUI toolkit heavily\n"
- "inspired by GTK. It handles events and low level drawing on behalf of\n"
- "the user and provides a high-level API for managing the UI and custom\n"
- "widgets. ZToolkit is written in C and was created to be used for building\n"
- "audio plugin UIs, where the dependencies often need to be kept to a\n"
- "minimum."
- msgstr ""
- #: gnu/packages/audio.scm:5705
- msgid "Instrument file software library"
- msgstr ""
- #: gnu/packages/audio.scm:5707
- msgid ""
- "libInstPatch is a library for processing digital sample based MIDI\n"
- "instrument \"patch\" files. The types of files libInstPatch supports are used\n"
- "for creating instrument sounds for wavetable synthesis. libInstPatch provides\n"
- "an object framework (based on GObject) to load patch files, which can then be\n"
- "edited, converted, compressed and saved."
- msgstr ""
- #: gnu/packages/audio.scm:5722
- msgid "ZToolkit with SVG support"
- msgstr ""
- #: gnu/packages/audio.scm:5753
- msgid "Digital signal processing library"
- msgstr ""
- #: gnu/packages/audio.scm:5754
- msgid ""
- "The LSP DSP library provides a set of functions that perform\n"
- "SIMD-optimized computing on several hardware architectures. All functions\n"
- "currently operate on IEEE-754 single-precision floating-point numbers."
- msgstr ""
- #: gnu/packages/audio.scm:5783
- msgid "Speech codec"
- msgstr ""
- #: gnu/packages/audio.scm:5785
- msgid ""
- "Codec 2 is a speech codec designed for communications quality speech\n"
- "between 700 and 3200 bit/s. The main application is low bandwidth HF/VHF\n"
- "digital radio."
- msgstr ""
- #: gnu/packages/audio.scm:5809
- msgid "P25 Phase 1 and ProVoice vocoder"
- msgstr ""
- #: gnu/packages/audio.scm:5811
- msgid ""
- "The mbelib library provides support for the 7200x4400 bit/s codec used\n"
- "in P25 Phase 1, the 7100x4400 bit/s codec used in ProVoice and the @emph{Half\n"
- "Rate} 3600x2250 bit/s vocoder used in various radio systems."
- msgstr ""
- #: gnu/packages/audio.scm:5902
- msgid "Synchronize musical beat, tempo, and phase across multiple applications"
- msgstr ""
- #: gnu/packages/audio.scm:5904
- msgid ""
- "Ableton Link is a C++ library that synchronizes musical beat, tempo, and phase\n"
- "across multiple applications running on one or more devices. Applications on devices\n"
- "connected to a local network discover each other automatically and form a musical\n"
- "session in which each participant can perform independently: anyone can start or stop\n"
- "while still staying in time."
- msgstr ""
- #: gnu/packages/audio.scm:5963
- msgid "Audio streaming tool"
- msgstr ""
- #: gnu/packages/audio.scm:5964
- msgid ""
- "Butt is a tool to stream audio to a ShoutCast or\n"
- "Icecast server."
- msgstr ""
- #: gnu/packages/audio.scm:6009
- msgid "Signal generation tools"
- msgstr ""
- #: gnu/packages/audio.scm:6010
- msgid ""
- "siggen is a set of tools for imitating a laboratory signal\n"
- "generator, generating audio signals out of Linux's /dev/dsp audio\n"
- "device. There is support for mono and/or stereo and 8 or 16 bit samples."
- msgstr ""
- #: gnu/packages/audio.scm:6056
- msgid "Python wrapper around SoX"
- msgstr ""
- #: gnu/packages/audio.scm:6057
- msgid ""
- "@code{python-pysox} is a wrapper around the @command{sox}\n"
- "command line tool. The API offers @code{Transformer} and @code{Combiner}\n"
- "classes that allow the user to incrementally build up effects and audio\n"
- "manipulations. @code{python-pysox} also provides methods for querying audio\n"
- "information such as sample rate, determining whether an audio file is silent,\n"
- "and much more."
- msgstr ""
- #: gnu/packages/audio.scm:6094
- msgid "Efficient signal resampling"
- msgstr ""
- #: gnu/packages/audio.scm:6096
- msgid ""
- "@code{python-resampy} implements the band-limited sinc interpolation\n"
- "method for sampling rate conversion as described by Julius O. Smith at the\n"
- "@url{https://ccrma.stanford.edu/~jos/resample/, Digital Audio Resampling\n"
- "Home Page}."
- msgstr ""
- #: gnu/packages/audio.scm:6130
- msgid "Python module for audio and music processing"
- msgstr ""
- #: gnu/packages/audio.scm:6132
- msgid ""
- "@code{librosa} is a python package for music and audio analysis. It\n"
- "provides the building blocks necessary to create music information retrieval\n"
- "systems."
- msgstr ""
- #: gnu/packages/audio.scm:6163
- msgid "Audio plug-in pack for LV2"
- msgstr ""
- #: gnu/packages/audio.scm:6165
- msgid ""
- "MDA-LV2 is an LV2 port of the MDA plugins. It includes effects and a few\n"
- "instrument plugins."
- msgstr ""
- #: gnu/packages/audio.scm:6195
- msgid "Library for decoding Super Audio CDs (SACD)"
- msgstr ""
- #: gnu/packages/audio.scm:6197
- msgid ""
- "The Odio SACD shared library is a decoding engine which takes a Super\n"
- "Audio CD source and extracts a 24-bit high resolution WAV file. It handles\n"
- "both DST and DSD streams."
- msgstr ""
- #: gnu/packages/audio.scm:6220
- msgid "Rip Super Audio CDs (SACD)"
- msgstr ""
- #: gnu/packages/audio.scm:6222
- msgid ""
- "Odio SACD is a command-line application which takes a Super Audio CD\n"
- "source and extracts a 24-bit high resolution WAV file. It handles both DST\n"
- "and DSD streams."
- msgstr ""
- #: gnu/packages/audio.scm:6249
- msgid "PipeWire graph manager"
- msgstr ""
- #: gnu/packages/audio.scm:6251
- msgid ""
- "qpwgraph is a graph manager dedicated to PipeWire, using the Qt C++\n"
- "framework. It provides a visual interface to audio and video connections\n"
- "managed by PipeWire."
- msgstr ""
- #: gnu/packages/audio.scm:6277
- msgid "Record audio streams to your hard drive"
- msgstr ""
- #: gnu/packages/audio.scm:6278
- msgid ""
- "Streamripper records shoutcast-compatible\n"
- "streams. For shoutcast style streams it finds the “meta data” or track\n"
- "separation data, and uses that as a marker for where the track should\n"
- "be separated."
- msgstr ""
- #: gnu/packages/audio.scm:6315
- msgid "Cross-platform audio library"
- msgstr ""
- #: gnu/packages/audio.scm:6316
- msgid "Cubeb is Mozilla's cross-platform audio library."
- msgstr ""
- #: gnu/packages/backup.scm:166
- msgid "Encrypted backup using rsync algorithm"
- msgstr ""
- #: gnu/packages/backup.scm:168
- msgid ""
- "Duplicity backs up directories by producing encrypted tar-format volumes\n"
- "and uploading them to a remote or local file server. Because duplicity uses\n"
- "librsync, the incremental archives are space efficient and only record the\n"
- "parts of files that have changed since the last backup. Because duplicity\n"
- "uses GnuPG to encrypt and/or sign these archives, they will be safe from\n"
- "spying and/or modification by the server."
- msgstr ""
- #: gnu/packages/backup.scm:192
- msgid "File verification and repair tools"
- msgstr ""
- #: gnu/packages/backup.scm:193
- msgid ""
- "Par2cmdline uses Reed-Solomon error-correcting codes to\n"
- "generate and verify PAR2 recovery files. These files can be distributed\n"
- "alongside the source files or stored together with back-ups to protect against\n"
- "transmission errors or @dfn{bit rot}, the degradation of storage media over\n"
- "time.\n"
- "Unlike a simple checksum, PAR2 doesn't merely detect errors: as long as the\n"
- "damage isn't too extensive (and smaller than the size of the recovery file), it\n"
- "can even repair them."
- msgstr ""
- #: gnu/packages/backup.scm:230
- msgid "Simple incremental backup tool"
- msgstr ""
- #: gnu/packages/backup.scm:232
- msgid ""
- "Hdup2 is a backup utility, its aim is to make backup really simple. The\n"
- "backup scheduling is done by means of a cron job. It supports an\n"
- "include/exclude mechanism, remote backups, encrypted backups and split\n"
- "backups (called chunks) to allow easy burning to CD/DVD."
- msgstr ""
- #: gnu/packages/backup.scm:327
- msgid "Multi-format archive and compression library"
- msgstr ""
- #: gnu/packages/backup.scm:329
- msgid ""
- "Libarchive provides a flexible interface for reading and writing\n"
- "archives in various formats such as tar and cpio. Libarchive also supports\n"
- "reading and writing archives compressed using various compression filters such\n"
- "as gzip and bzip2. The library is inherently stream-oriented; readers\n"
- "serially iterate through the archive, writers serially add things to the\n"
- "archive. In particular, note that there is currently no built-in support for\n"
- "random access nor for in-place modification. This package provides the\n"
- "@command{bsdcat}, @command{bsdcpio} and @command{bsdtar} commands."
- msgstr ""
- #: gnu/packages/backup.scm:392
- msgid "Provide a list of files to backup"
- msgstr ""
- #: gnu/packages/backup.scm:394
- msgid ""
- "Rdup is a utility inspired by rsync and the plan9 way of doing backups.\n"
- "Rdup itself does not backup anything, it only print a list of absolute\n"
- "file names to standard output. Auxiliary scripts are needed that act on this\n"
- "list and implement the backup strategy."
- msgstr ""
- #: gnu/packages/backup.scm:431
- msgid "Efficient backups using parity snapshots across disk arrays"
- msgstr ""
- #: gnu/packages/backup.scm:433
- msgid ""
- "SnapRAID backs up files stored across multiple storage devices, such as\n"
- "disk arrays, in an efficient way reminiscent of its namesake @acronym{RAID,\n"
- "Redundant Array of Independent Disks} level 4.\n"
- "\n"
- "Instead of creating a complete copy of the data like classic backups do, it\n"
- "saves space by calculating one or more sets of parity information that's a\n"
- "fraction of the size. Each parity set is stored on an additional device the\n"
- "size of the largest single storage volume, and protects against the loss of any\n"
- "one device, up to a total of six. If more devices fail than there are parity\n"
- "sets, (only) the files they contained are lost, not the entire array. Data\n"
- "corruption by unreliable devices can also be detected and repaired.\n"
- "\n"
- "SnapRAID is distinct from actual RAID in that it operates on files and creates\n"
- "distinct snapshots only when run. It mainly targets large collections of big\n"
- "files that rarely change, like home media centers. One disadvantage is that\n"
- "@emph{all} data not in the latest snapshot may be lost if one device fails. An\n"
- "advantage is that accidentally deleted files can be recovered, which is not the\n"
- "case with RAID.\n"
- "\n"
- "It's also more flexible than true RAID: devices can have different sizes and\n"
- "more can be added without disturbing others. Devices that are not in use can\n"
- "remain fully idle, saving power and producing less noise."
- msgstr ""
- #: gnu/packages/backup.scm:481
- msgid "Tar-compatible archiver"
- msgstr ""
- #: gnu/packages/backup.scm:483
- msgid ""
- "Btar is a tar-compatible archiver which allows arbitrary compression and\n"
- "ciphering, redundancy, differential backup, indexed extraction, multicore\n"
- "compression, input and output serialisation, and tolerance to partial archive\n"
- "errors."
- msgstr ""
- #: gnu/packages/backup.scm:508
- msgid "Local/remote mirroring+incremental backup"
- msgstr ""
- #: gnu/packages/backup.scm:510
- msgid ""
- "Rdiff-backup backs up one directory to another, possibly over a network.\n"
- "The target directory ends up a copy of the source directory, but extra reverse\n"
- "diffs are stored in a special subdirectory of that target directory, so you\n"
- "can still recover files lost some time ago. The idea is to combine the best\n"
- "features of a mirror and an incremental backup. Rdiff-backup also preserves\n"
- "subdirectories, hard links, dev files, permissions, uid/gid ownership,\n"
- "modification times, extended attributes, acls, and resource forks. Also,\n"
- "rdiff-backup can operate in a bandwidth efficient manner over a pipe, like\n"
- "rsync. Thus you can use rdiff-backup and ssh to securely back a hard drive up\n"
- "to a remote location, and only the differences will be transmitted. Finally,\n"
- "rdiff-backup is easy to use and settings have sensible defaults."
- msgstr ""
- #: gnu/packages/backup.scm:545
- msgid "Deduplicating snapshot backup utility based on rsync"
- msgstr ""
- #: gnu/packages/backup.scm:546
- msgid ""
- "rsnapshot is a file system snapshot utility based on rsync.\n"
- "rsnapshot makes it easy to make periodic snapshots of local machines, and\n"
- "remote machines over SSH. To reduce the disk space required for each backup,\n"
- "rsnapshot uses hard links to deduplicate identical files."
- msgstr ""
- #: gnu/packages/backup.scm:632
- msgid "Tools & library for data backup and distributed storage"
- msgstr ""
- #: gnu/packages/backup.scm:634
- msgid ""
- "Libchop is a set of utilities and library for data backup and\n"
- "distributed storage. Its main application is @command{chop-backup}, an\n"
- "encrypted backup program that supports data integrity checks, versioning,\n"
- "distribution among several sites, selective sharing of stored data, adaptive\n"
- "compression, and more. The library itself implements storage techniques such\n"
- "as content-addressable storage, content hash keys, Merkle trees, similarity\n"
- "detection, and lossless compression."
- msgstr ""
- #: gnu/packages/backup.scm:767
- msgid "Deduplicated, encrypted, authenticated and compressed backups"
- msgstr ""
- #: gnu/packages/backup.scm:768
- msgid ""
- "Borg is a deduplicating backup program. Optionally, it\n"
- "supports compression and authenticated encryption. The main goal of Borg is to\n"
- "provide an efficient and secure way to backup data. The data deduplication\n"
- "technique used makes Borg suitable for daily backups since only changes are\n"
- "stored. The authenticated encryption technique makes it suitable for storing\n"
- "backups on untrusted computers."
- msgstr ""
- #: gnu/packages/backup.scm:798
- msgid "WIM file manipulation library and utilities"
- msgstr ""
- #: gnu/packages/backup.scm:799
- msgid ""
- "wimlib is a C library and set of command-line utilities for\n"
- "creating, modifying, extracting, and mounting archives in the Windows Imaging\n"
- "Format (@dfn{WIM files}). It can capture and apply WIMs directly from and to\n"
- "NTFS volumes using @code{ntfs-3g}, preserving NTFS-specific attributes."
- msgstr ""
- #: gnu/packages/backup.scm:905
- msgid "Fast, disk based, rotating network backup system"
- msgstr ""
- #: gnu/packages/backup.scm:907
- msgid ""
- "With dirvish you can maintain a set of complete images of your\n"
- "file systems with unattended creation and expiration. A dirvish backup vault\n"
- "is like a time machine for your data."
- msgstr ""
- #: gnu/packages/backup.scm:1001
- msgid "Backup program with multiple revisions, encryption and more"
- msgstr ""
- #: gnu/packages/backup.scm:1002
- msgid ""
- "Restic is a program that does backups right and was designed\n"
- "with the following principles in mind:\n"
- "\n"
- "@itemize\n"
- "@item Easy: Doing backups should be a frictionless process, otherwise you\n"
- "might be tempted to skip it. Restic should be easy to configure and use, so\n"
- "that, in the event of a data loss, you can just restore it. Likewise,\n"
- "restoring data should not be complicated.\n"
- "\n"
- "@item Fast: Backing up your data with restic should only be limited by your\n"
- "network or hard disk bandwidth so that you can backup your files every day.\n"
- "Nobody does backups if it takes too much time. Restoring backups should only\n"
- "transfer data that is needed for the files that are to be restored, so that\n"
- "this process is also fast.\n"
- "\n"
- "@item Verifiable: Much more important than backup is restore, so restic\n"
- "enables you to easily verify that all data can be restored. @item Secure:\n"
- "Restic uses cryptography to guarantee confidentiality and integrity of your\n"
- "data. The location the backup data is stored is assumed not to be a trusted\n"
- "environment (e.g. a shared space where others like system administrators are\n"
- "able to access your backups). Restic is built to secure your data against\n"
- "such attackers.\n"
- "\n"
- "@item Efficient: With the growth of data, additional snapshots should only\n"
- "take the storage of the actual increment. Even more, duplicate data should be\n"
- "de-duplicated before it is actually written to the storage back end to save\n"
- "precious backup space.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/backup.scm:1051
- msgid "Versatile deduplicating backup tool"
- msgstr ""
- #: gnu/packages/backup.scm:1053
- msgid ""
- "ZBackup is a globally-deduplicating backup tool, based on the\n"
- "ideas found in Rsync. Feed a large @file{.tar} into it, and it will\n"
- "store duplicate regions of it only once, then compress and optionally\n"
- "encrypt the result. Feed another @file{.tar} file, and it will also\n"
- "re-use any data found in any previous backups. This way only new\n"
- "changes are stored, and as long as the files are not very different,\n"
- "the amount of storage required is very low. Any of the backup files\n"
- "stored previously can be read back in full at any time. The program\n"
- "is format-agnostic, so you can feed virtually any files to it."
- msgstr ""
- #: gnu/packages/backup.scm:1088
- msgid "Ext2/3/4 file system dump/restore utilities"
- msgstr ""
- #: gnu/packages/backup.scm:1089
- msgid ""
- "Dump examines files in a file system, determines which ones\n"
- "need to be backed up, and copies those files to a specified disk, tape or\n"
- "other storage medium. Subsequent incremental backups can then be layered on\n"
- "top of the full backup. The restore command performs the inverse function of\n"
- "dump; it can restore a full backup of a file system. Single files and\n"
- "directory subtrees may also be restored from full or partial backups in\n"
- "interactive mode."
- msgstr ""
- #: gnu/packages/backup.scm:1152
- msgid "Backup tool for Btrfs subvolumes"
- msgstr ""
- #: gnu/packages/backup.scm:1153
- msgid ""
- "Btrbk is a backup tool for Btrfs subvolumes, taking\n"
- "advantage of Btrfs specific capabilities to create atomic snapshots and\n"
- "transfer them incrementally to your backup locations. The source and target\n"
- "locations are specified in a config file, which allows easily configuring\n"
- "simple scenarios like e.g. a @i{laptop with locally attached backup disks}, as\n"
- "well as more complex ones, e.g. a @i{server receiving backups from several\n"
- "hosts via SSH, with different retention policy}. It has features such as:\n"
- "@itemize\n"
- "@item atomic snapshots\n"
- "@item incremental backups\n"
- "@item flexible retention policy\n"
- "@item backups to multiple destinations\n"
- "@item transfer via SSH\n"
- "@item resume backups (for removable and mobile devices)\n"
- "@item archive to offline storage\n"
- "@item encrypted backups to non-btrfs storage\n"
- "@item wildcard subvolumes (useful for Docker and LXC containers)\n"
- "@item transaction log\n"
- "@item comprehensive list and statistics output\n"
- "@item resolve and trace Btrfs parent-child and received-from relationships\n"
- "@item list file changes between backups\n"
- "@item calculate accurate disk space usage based on block regions.\n"
- "@end itemize\n"
- "Btrbk is designed to run as a cron job for triggering periodic snapshots and\n"
- "backups, as well as from the command line (e.g. for instantly creating\n"
- "additional snapshots)."
- msgstr ""
- #: gnu/packages/backup.scm:1215
- msgid "Differential backup and restore"
- msgstr ""
- #: gnu/packages/backup.scm:1216
- msgid ""
- "Burp is a network backup and restore program. It attempts\n"
- "to reduce network traffic and the amount of space that is used by each\n"
- "backup."
- msgstr ""
- #: gnu/packages/backup.scm:1246
- msgid "Software archive disassembler"
- msgstr ""
- #: gnu/packages/backup.scm:1247
- msgid ""
- "Disarchive can disassemble software archives into data\n"
- "and metadata. The goal is to create a small amount of metadata that\n"
- "can be used to recreate a software archive bit-for-bit from the\n"
- "original files. For example, a software archive made using tar and\n"
- "Gzip will need to describe the order of files in the tarball and the\n"
- "compression parameters used by Gzip."
- msgstr ""
- #: gnu/packages/backup.scm:1290
- msgid "Simple, configuration-driven backup software"
- msgstr ""
- #: gnu/packages/backup.scm:1292
- msgid ""
- "borgmatic is simple, configuration-driven backup software for servers\n"
- "and workstations. Protect your files with client-side encryption. Backup\n"
- "your databases too. Monitor it all with integrated third-party services.\n"
- "borgmatic is powered by borg."
- msgstr ""
- #: gnu/packages/backup.scm:1351
- msgid "Graphical backup client based on BorgBackup"
- msgstr ""
- #: gnu/packages/backup.scm:1352
- msgid ""
- "Vorta is a graphical backup client based on the Borg backup\n"
- "tool. It supports the use of remote backup repositories. It can perform\n"
- "scheduled backups, and has a graphical tool for browsing and extracting the Borg\n"
- "archives."
- msgstr ""
- #: gnu/packages/backup.scm:1374
- msgid "GTK frontend for rsync"
- msgstr ""
- #: gnu/packages/backup.scm:1376
- msgid ""
- "Grsync is a simple graphical interface using GTK for the @command{rsync}\n"
- "command line program. It currently supports only a limited set of the most\n"
- "important rsync features, but can be used effectively for local directory\n"
- "synchronization."
- msgstr ""
- #: gnu/packages/base.scm:98
- msgid "Hello, GNU world: An example GNU package"
- msgstr ""
- #: gnu/packages/base.scm:100
- msgid ""
- "GNU Hello prints the message \"Hello, world!\" and then exits. It\n"
- "serves as an example of standard GNU coding practices. As such, it supports\n"
- "command-line arguments, multiple languages, and so on."
- msgstr ""
- #: gnu/packages/base.scm:149
- msgid "Print lines matching a pattern"
- msgstr ""
- #: gnu/packages/base.scm:151
- msgid ""
- "grep is a tool for finding text inside files. Text is found by\n"
- "matching a pattern provided by the user in one or many files. The pattern\n"
- "may be provided as a basic or extended regular expression, or as fixed\n"
- "strings. By default, the matching text is simply printed to the screen,\n"
- "however the output can be greatly customized to include, for example, line\n"
- "numbers. GNU grep offers many extensions over the standard utility,\n"
- "including, for example, recursive directory searching."
- msgstr ""
- #: gnu/packages/base.scm:191
- msgid "Stream editor"
- msgstr ""
- #: gnu/packages/base.scm:194
- msgid ""
- "Sed is a non-interactive, text stream editor. It receives a text\n"
- "input from a file or from standard input and it then applies a series of text\n"
- "editing commands to the stream and prints its output to standard output. It\n"
- "is often used for substituting text patterns in a stream. The GNU\n"
- "implementation offers several extensions over the standard utility."
- msgstr ""
- #: gnu/packages/base.scm:250
- msgid "Managing tar archives"
- msgstr ""
- #: gnu/packages/base.scm:252
- msgid ""
- "Tar provides the ability to create tar archives, as well as the\n"
- "ability to extract, update or list files in an existing archive. It is\n"
- "useful for combining many files into one larger file, while maintaining\n"
- "directory structure and file information such as permissions and\n"
- "creation/modification dates. GNU tar offers many extensions over the\n"
- "standard utility."
- msgstr ""
- #: gnu/packages/base.scm:281
- msgid "Apply differences to originals, with optional backups"
- msgstr ""
- #: gnu/packages/base.scm:283
- msgid ""
- "Patch is a program that applies changes to files based on differences\n"
- "laid out as by the program \"diff\". The changes may be applied to one or more\n"
- "files depending on the contents of the diff file. It accepts several\n"
- "different diff formats. It may also be used to revert previously applied\n"
- "differences."
- msgstr ""
- #: gnu/packages/base.scm:309
- msgid "Comparing and merging files"
- msgstr ""
- #: gnu/packages/base.scm:311
- msgid ""
- "GNU Diffutils is a package containing tools for finding the\n"
- "differences between files. The \"diff\" command is used to show how two files\n"
- "differ, while \"cmp\" shows the offsets and line numbers where they differ.\n"
- "\"diff3\" allows you to compare three files. Finally, \"sdiff\" offers an\n"
- "interactive means to merge two files."
- msgstr ""
- #: gnu/packages/base.scm:346
- msgid "Operating on files matching given criteria"
- msgstr ""
- #: gnu/packages/base.scm:348
- msgid ""
- "Findutils supplies the basic file directory searching utilities of the\n"
- "GNU system. It consists of two primary searching utilities: \"find\"\n"
- "recursively searches for files in a directory according to given criteria and\n"
- "\"locate\" lists files in a database that match a query. Two auxiliary tools\n"
- "are included: \"updatedb\" updates the file name database and \"xargs\" may be\n"
- "used to apply commands with arbitrarily long arguments."
- msgstr ""
- #: gnu/packages/base.scm:442
- msgid "Core GNU utilities (file, text, shell)"
- msgstr ""
- #: gnu/packages/base.scm:444
- msgid ""
- "GNU Coreutils package includes all of the basic command-line tools that\n"
- "are expected in a POSIX system, excluding shell. This package is the union of\n"
- "the GNU fileutils, sh-utils, and textutils packages. Most of these tools\n"
- "offer extended functionality beyond that which is outlined in the POSIX\n"
- "standard."
- msgstr ""
- #: gnu/packages/base.scm:519
- msgid "Remake files automatically"
- msgstr ""
- #: gnu/packages/base.scm:521
- msgid ""
- "Make is a program that is used to control the production of\n"
- "executables or other files from their source files. The process is\n"
- "controlled from a Makefile, in which the developer specifies how each file is\n"
- "generated from its source. It has powerful dependency resolution and the\n"
- "ability to determine when files have to be regenerated after their sources\n"
- "change. GNU make offers many powerful extensions over the standard utility."
- msgstr ""
- #: gnu/packages/base.scm:598
- msgid "Binary utilities: bfd gas gprof ld"
- msgstr ""
- #: gnu/packages/base.scm:600
- msgid ""
- "GNU Binutils is a collection of tools for working with binary files.\n"
- "Perhaps the most notable are \"ld\", a linker, and \"as\", an assembler.\n"
- "Other tools include programs to display binary profiling information, list\n"
- "the strings in a binary file, and utilities for working with archives. The\n"
- "\"bfd\" library for working with executable and object formats is also\n"
- "included."
- msgstr ""
- #: gnu/packages/base.scm:724
- msgid "The linker wrapper"
- msgstr ""
- #: gnu/packages/base.scm:726
- msgid ""
- "The linker wrapper (or @code{ld-wrapper}) wraps the linker to add any\n"
- "missing @code{-rpath} flags, and to detect any misuse of libraries outside of\n"
- "the store."
- msgstr ""
- #: gnu/packages/base.scm:960
- msgid "The GNU C Library"
- msgstr ""
- #: gnu/packages/base.scm:962
- msgid ""
- "Any Unix-like operating system needs a C library: the library which\n"
- "defines the \"system calls\" and other basic facilities such as open, malloc,\n"
- "printf, exit...\n"
- "\n"
- "The GNU C library is used as the C library in the GNU system and most systems\n"
- "with the Linux kernel."
- msgstr ""
- #: gnu/packages/base.scm:1155
- msgid "All the locales supported by the GNU C Library"
- msgstr ""
- #: gnu/packages/base.scm:1157
- msgid ""
- "This package provides all the locales supported by the GNU C Library,\n"
- "more than 400 in total. To use them set the @code{LOCPATH} environment variable\n"
- "to the @code{share/locale} sub-directory of this package."
- msgstr ""
- #: gnu/packages/base.scm:1315
- msgid "Find full path of shell commands"
- msgstr ""
- #: gnu/packages/base.scm:1317
- msgid ""
- "The which program finds the location of executables in PATH, with a\n"
- "variety of options. It is an alternative to the shell \"type\" built-in\n"
- "command."
- msgstr ""
- #: gnu/packages/base.scm:1439
- msgid "Database of current and historical time zones"
- msgstr ""
- #: gnu/packages/base.scm:1440
- msgid ""
- "The Time Zone Database (often called tz or zoneinfo)\n"
- "contains code and data that represent the history of local time for many\n"
- "representative locations around the globe. It is updated periodically to\n"
- "reflect changes made by political bodies to time zone boundaries, UTC offsets,\n"
- "and daylight-saving rules."
- msgstr ""
- #: gnu/packages/base.scm:1476
- msgid "Character set conversion library"
- msgstr ""
- #: gnu/packages/base.scm:1478
- msgid ""
- "libiconv provides an implementation of the iconv function for systems\n"
- "that lack it. iconv is used to convert between character encodings in a\n"
- "program. It supports a wide variety of different encodings."
- msgstr ""
- #: gnu/packages/bittorrent.scm:140
- msgid "Fast and easy BitTorrent client"
- msgstr ""
- #: gnu/packages/bittorrent.scm:142
- msgid ""
- "Transmission is a BitTorrent client that comes with graphical,\n"
- "textual, and Web user interfaces. Transmission also has a daemon for\n"
- "unattended operations. It supports local peer discovery, full encryption,\n"
- "DHT, µTP, PEX and Magnet Links."
- msgstr ""
- #: gnu/packages/bittorrent.scm:175
- msgid "Gtk frontend to the Transmission daemon"
- msgstr ""
- #: gnu/packages/bittorrent.scm:176
- msgid ""
- "transmission-remote-gtk is a GTK client for remote management\n"
- "of the Transmission BitTorrent client, using its HTTP RPC protocol."
- msgstr ""
- #: gnu/packages/bittorrent.scm:196
- msgid "BitTorrent library of rtorrent"
- msgstr ""
- #: gnu/packages/bittorrent.scm:198
- msgid ""
- "LibTorrent is a BitTorrent library used by and developed in parallel\n"
- "with the BitTorrent client rtorrent. It is written in C++ with emphasis on\n"
- "speed and efficiency."
- msgstr ""
- #: gnu/packages/bittorrent.scm:224
- msgid "BitTorrent client with ncurses interface"
- msgstr ""
- #: gnu/packages/bittorrent.scm:226
- msgid ""
- "rTorrent is a BitTorrent client with an ncurses interface. It supports\n"
- "full encryption, DHT, PEX, and Magnet Links. It can also be controlled via\n"
- "XML-RPC over SCGI."
- msgstr ""
- #: gnu/packages/bittorrent.scm:258
- msgid "Console client for the Transmission BitTorrent daemon"
- msgstr ""
- #: gnu/packages/bittorrent.scm:259
- msgid ""
- "Tremc is a console client, with a curses interface, for the\n"
- "Transmission BitTorrent daemon."
- msgstr ""
- #: gnu/packages/bittorrent.scm:306
- msgid "Utility for parallel downloading files"
- msgstr ""
- #: gnu/packages/bittorrent.scm:308
- msgid ""
- "Aria2 is a lightweight, multi-protocol & multi-source command-line\n"
- "download utility. It supports HTTP/HTTPS, FTP, SFTP, BitTorrent and Metalink.\n"
- "Aria2 can be manipulated via built-in JSON-RPC and XML-RPC interfaces."
- msgstr ""
- #: gnu/packages/bittorrent.scm:342
- msgid "Universal download manager with GTK+ interface"
- msgstr ""
- #: gnu/packages/bittorrent.scm:344
- msgid ""
- "uGet is portable download manager with GTK+ interface supporting\n"
- "HTTP, HTTPS, BitTorrent and Metalink, supporting multi-connection\n"
- "downloads, download scheduling, download rate limiting."
- msgstr ""
- #: gnu/packages/bittorrent.scm:374
- msgid "Utility to create BitTorrent metainfo files"
- msgstr ""
- #: gnu/packages/bittorrent.scm:376
- msgid ""
- "mktorrent is a simple command-line utility to create BitTorrent\n"
- "@dfn{metainfo} files, often known simply as @dfn{torrents}, from both single\n"
- "files and whole directories. It can add multiple trackers and web seed URLs,\n"
- "and set the @code{private} flag to disallow advertisement through the\n"
- "distributed hash table (@dfn{DHT}) and Peer Exchange. Hashing is multi-threaded\n"
- "and will take advantage of multiple processor cores where possible."
- msgstr ""
- #: gnu/packages/bittorrent.scm:433
- msgid "Feature-complete BitTorrent implementation"
- msgstr ""
- #: gnu/packages/bittorrent.scm:435
- msgid ""
- "libtorrent-rasterbar is a feature-complete C++ BitTorrent implementation\n"
- "focusing on efficiency and scalability. It runs on embedded devices as well as\n"
- "desktops."
- msgstr ""
- #: gnu/packages/bittorrent.scm:484
- msgid "Graphical BitTorrent client"
- msgstr ""
- #: gnu/packages/bittorrent.scm:486
- msgid ""
- "qBittorrent is a BitTorrent client programmed in C++/Qt that uses\n"
- "libtorrent (sometimes called libtorrent-rasterbar) by Arvid Norberg.\n"
- "\n"
- "It aims to be a good alternative to all other BitTorrent clients out there.\n"
- "qBittorrent is fast, stable and provides unicode support as well as many\n"
- "features."
- msgstr ""
- #: gnu/packages/bittorrent.scm:565
- msgid "Fully-featured cross-platform BitTorrent client"
- msgstr ""
- #: gnu/packages/bittorrent.scm:567
- msgid ""
- "Deluge contains the common features to BitTorrent clients such as\n"
- "Protocol Encryption, DHT, Local Peer Discovery (LSD), Peer Exchange\n"
- "(PEX), UPnP, NAT-PMP, Proxy support, Web seeds, global and per-torrent\n"
- "speed limits. Deluge heavily utilises the libtorrent library. It is\n"
- "designed to run as both a normal standalone desktop application and as a\n"
- "client-server."
- msgstr ""
- #: gnu/packages/certs.scm:80
- msgid "Certbot DNS challenge automatization for deSEC"
- msgstr ""
- #: gnu/packages/certs.scm:81
- msgid ""
- "The deSEC can be used to obtain certificates with certbot\n"
- "DNS ownership verification. With the help of this hook script, you can obtain\n"
- "your Let's Encrypt certificate using certbot with authorization provided by the\n"
- "DNS challenge mechanism, that is, you will not need a running web server or any\n"
- "port forwarding to your local machine."
- msgstr ""
- #: gnu/packages/certs.scm:123
- msgid "Utility to split TLS certificates data into multiple PEM files"
- msgstr ""
- #: gnu/packages/certs.scm:124
- msgid ""
- "This is a C version of the certdata2pem Python utility\n"
- "that was originally contributed to Debian."
- msgstr ""
- #: gnu/packages/certs.scm:184
- msgid "CA certificates from Mozilla"
- msgstr ""
- #: gnu/packages/certs.scm:186
- msgid ""
- "This package provides certificates for Certification Authorities (CA)\n"
- "taken from the NSS package and thus ultimately from the Mozilla project."
- msgstr ""
- #: gnu/packages/certs.scm:287
- msgid "Let's Encrypt root and intermediate certificates"
- msgstr ""
- #: gnu/packages/certs.scm:288
- msgid ""
- "This package provides a certificate store containing only the\n"
- "Let's Encrypt root and intermediate certificates. It is intended to be used\n"
- "within Guix."
- msgstr ""
- #: gnu/packages/compression.scm:156
- msgid "Compression library"
- msgstr ""
- #: gnu/packages/compression.scm:158
- msgid ""
- "zlib is designed to be a free, general-purpose, legally unencumbered --\n"
- "that is, not covered by any patents -- lossless data-compression library for\n"
- "use on virtually any computer hardware and operating system. The zlib data\n"
- "format is itself portable across platforms. Unlike the LZW compression method\n"
- "used in Unix compress(1) and in the GIF image format, the compression method\n"
- "currently used in zlib essentially never expands the data. (LZW can double or\n"
- "triple the file size in extreme cases.) zlib's memory footprint is also\n"
- "independent of the input data and can be reduced, if necessary, at some cost\n"
- "in compression."
- msgstr ""
- #: gnu/packages/compression.scm:208
- msgid "Zip Compression library"
- msgstr ""
- #: gnu/packages/compression.scm:210
- msgid ""
- "Minizip is a minimalistic library that supports compressing,\n"
- "extracting and viewing ZIP archives. This version is extracted from\n"
- "the @code{zlib} source."
- msgstr ""
- #: gnu/packages/compression.scm:229
- msgid "Replacement for Sun's 'jar' utility"
- msgstr ""
- #: gnu/packages/compression.scm:231
- msgid ""
- "FastJar is an attempt to create a much faster replacement for Sun's\n"
- "@code{jar} utility. Instead of being written in Java, FastJar is written in C."
- msgstr ""
- #: gnu/packages/compression.scm:258
- msgid "C library for manipulating POSIX tar files"
- msgstr ""
- #: gnu/packages/compression.scm:260
- msgid ""
- "libtar is a C library for manipulating POSIX tar files. It handles\n"
- "adding and extracting files to/from a tar archive."
- msgstr ""
- #: gnu/packages/compression.scm:277
- msgid "General file (de)compression (using lzw)"
- msgstr ""
- #: gnu/packages/compression.scm:310
- msgid ""
- "GNU Gzip provides data compression and decompression utilities; the\n"
- "typical extension is \".gz\". Unlike the \"zip\" format, it compresses a single\n"
- "file; as a result, it is often used in conjunction with \"tar\", resulting in\n"
- "\".tar.gz\" or \".tgz\", etc."
- msgstr ""
- #: gnu/packages/compression.scm:422
- msgid "High-quality data compression program"
- msgstr ""
- #: gnu/packages/compression.scm:424
- msgid ""
- "bzip2 is a freely available, patent free (see below), high-quality data\n"
- "compressor. It typically compresses files to within 10% to 15% of the best\n"
- "available techniques (the PPM family of statistical compressors), whilst\n"
- "being around twice as fast at compression and six times faster at\n"
- "decompression."
- msgstr ""
- #: gnu/packages/compression.scm:481
- msgid "Parallel bzip2 compression utility"
- msgstr ""
- #: gnu/packages/compression.scm:483
- msgid ""
- "lbzip2 is a multi-threaded compression utility with support for the\n"
- "bzip2 compressed file format. lbzip2 can process standard bz2 files in\n"
- "parallel. It uses POSIX threading model (pthreads), which allows it to take\n"
- "full advantage of symmetric multiprocessing (SMP) systems. It has been proven\n"
- "to scale linearly, even to over one hundred processor cores. lbzip2 is fully\n"
- "compatible with bzip2 – both at file format and command line level."
- msgstr ""
- #: gnu/packages/compression.scm:516
- msgid "Parallel bzip2 implementation"
- msgstr ""
- #: gnu/packages/compression.scm:518
- msgid ""
- "Pbzip2 is a parallel implementation of the bzip2 block-sorting file\n"
- "compressor that uses pthreads and achieves near-linear speedup on SMP machines.\n"
- "The output of this version is fully compatible with bzip2 v1.0.2 (i.e. anything\n"
- "compressed with pbzip2 can be decompressed with bzip2)."
- msgstr ""
- #: gnu/packages/compression.scm:560
- msgid "General-purpose data compression"
- msgstr ""
- #: gnu/packages/compression.scm:562
- msgid ""
- "XZ Utils is free general-purpose data compression software with high\n"
- "compression ratio. XZ Utils were written for POSIX-like systems, but also\n"
- "work on some not-so-POSIX systems. XZ Utils are the successor to LZMA Utils.\n"
- "\n"
- "The core of the XZ Utils compression code is based on LZMA SDK, but it has\n"
- "been modified quite a lot to be suitable for XZ Utils. The primary\n"
- "compression algorithm is currently LZMA2, which is used inside the .xz\n"
- "container format. With typical files, XZ Utils create 30 % smaller output\n"
- "than gzip and 15 % smaller output than bzip2."
- msgstr ""
- #: gnu/packages/compression.scm:598
- msgid "LHA archive decompressor"
- msgstr ""
- #: gnu/packages/compression.scm:599
- msgid ""
- "Lhasa is a replacement for the Unix LHA tool, for\n"
- "decompressing .lzh (LHA / LHarc) and .lzs (LArc) archives. The backend for the\n"
- "tool is a library, so that it can be reused for other purposes. Lhasa aims to\n"
- "be compatible with as many types of lzh/lzs archives as possible. It also aims\n"
- "to generate the same output as the (non-free) Unix LHA tool, so that it will\n"
- "act as a free drop-in replacement."
- msgstr ""
- #: gnu/packages/compression.scm:623
- msgid "Data compression library suitable for real-time data de-/compression"
- msgstr ""
- #: gnu/packages/compression.scm:625
- msgid ""
- "LZO is a data compression library which is suitable for data\n"
- "de-/compression in real-time. This means it favours speed over\n"
- "compression ratio.\n"
- "\n"
- "LZO is written in ANSI C. Both the source code and the compressed data\n"
- "format are designed to be portable across platforms."
- msgstr ""
- #: gnu/packages/compression.scm:648
- msgid "Compress or expand files"
- msgstr ""
- #: gnu/packages/compression.scm:650
- msgid ""
- "Lzop is a file compressor which is very similar to gzip. Lzop uses the\n"
- "LZO data compression library for compression services, and its main advantages\n"
- "over gzip are much higher compression and decompression speed (at the cost of\n"
- "some compression ratio)."
- msgstr ""
- #: gnu/packages/compression.scm:675
- msgid "Lossless data compressor based on the LZMA algorithm"
- msgstr ""
- #: gnu/packages/compression.scm:677
- msgid ""
- "Lzip is a lossless data compressor with a user interface similar to the\n"
- "one of gzip or bzip2. Lzip decompresses almost as fast as gzip and compresses\n"
- "more than bzip2, which makes it well-suited for software distribution and data\n"
- "archiving. Lzip is a clean implementation of the LZMA algorithm."
- msgstr ""
- #: gnu/packages/compression.scm:702
- msgid "Recover and decompress data from damaged lzip files"
- msgstr ""
- #: gnu/packages/compression.scm:704
- msgid ""
- "Lziprecover is a data recovery tool and decompressor for files in the lzip\n"
- "compressed data format (.lz). It can test the integrity of lzip files, extract\n"
- "data from damaged ones, and repair most files with small errors (up to one\n"
- "single-byte error per member) entirely.\n"
- "\n"
- "Lziprecover is not a replacement for regular backups, but a last line of defence\n"
- "when even the backups are corrupt. It can recover files by merging the good\n"
- "parts of two or more damaged copies, such as can be easily produced by running\n"
- "@command{ddrescue} on a failing device.\n"
- "\n"
- "This package also includes @command{unzcrash}, a tool to test the robustness of\n"
- "decompressors when faced with corrupted input."
- msgstr ""
- #: gnu/packages/compression.scm:765
- msgid "Archives in shell scripts, uuencode/uudecode"
- msgstr ""
- #: gnu/packages/compression.scm:767
- msgid ""
- "GNU sharutils is a package for creating and manipulating shell\n"
- "archives that can be readily emailed. A shell archive is a file that can be\n"
- "processed by a Bourne-type shell to unpack the original collection of files.\n"
- "This package is mostly for compatibility and historical interest."
- msgstr ""
- #: gnu/packages/compression.scm:799
- msgid "Library for SoundFont decompression"
- msgstr ""
- #: gnu/packages/compression.scm:801
- msgid ""
- "SfArkLib is a C++ library for decompressing SoundFont files compressed\n"
- "with the sfArk algorithm."
- msgstr ""
- #: gnu/packages/compression.scm:835
- msgid "Basic sfArk decompressor"
- msgstr ""
- #: gnu/packages/compression.scm:836
- msgid ""
- "SfArk extractor converts SoundFonts in the compressed legacy\n"
- "sfArk file format to the uncompressed sf2 format."
- msgstr ""
- #: gnu/packages/compression.scm:854
- msgid "Compression tools for some formats used by Microsoft"
- msgstr ""
- #: gnu/packages/compression.scm:856
- msgid ""
- "The purpose of libmspack is to provide both compression and\n"
- "decompression of some loosely related file formats used by Microsoft."
- msgstr ""
- #: gnu/packages/compression.scm:906
- msgid "Compression algorithm focused on speed"
- msgstr ""
- #: gnu/packages/compression.scm:907
- msgid ""
- "LZ4 is a lossless compression algorithm, providing\n"
- "compression speed at 400 MB/s per core (0.16 Bytes/cycle). It also features an\n"
- "extremely fast decoder, with speed in multiple GB/s per core (0.71 Bytes/cycle).\n"
- "A high compression derivative, called LZ4_HC, is also provided. It trades CPU\n"
- "time for compression ratio."
- msgstr ""
- #: gnu/packages/compression.scm:957 gnu/packages/compression.scm:1007
- msgid "Tools to create and extract squashfs file systems"
- msgstr ""
- #: gnu/packages/compression.scm:959
- msgid ""
- "Squashfs is a highly compressed read-only file system for Linux. It\n"
- "compresses files, inodes, and directories with one of several compressors.\n"
- "All blocks are packed to minimize the data overhead, and block sizes of\n"
- "between 4K and 1M are supported. It is intended to be used for archival use,\n"
- "for live media, and for embedded systems where low overhead is needed.\n"
- "This package allows you to create and extract such file systems."
- msgstr ""
- #: gnu/packages/compression.scm:1009
- msgid ""
- "Squashfs is a highly compressed read-only file system for Linux. It\n"
- "compresses files, inodes, and directories with one of several compressors.\n"
- "All blocks are packed to minimize the data overhead, and block sizes of\n"
- "between 4K and 1M are supported. It is intended to be used for archival use,\n"
- "for live media, and for embedded systems where low overhead is needed.\n"
- "\n"
- "The squashfs-tools-ng package offers alternative tooling to create and extract\n"
- "such file systems. It is not based on the older squashfs-tools package and\n"
- "its tools have different names:\n"
- "\n"
- "@enumerate\n"
- "@item @command{gensquashfs} produces SquashFS images from a directory or\n"
- "@command{gen_init_cpio}-like file listings and can generate SELinux labels.\n"
- "@item @command{rdsquashfs} inspects and unpacks SquashFS images.\n"
- "@item @command{sqfs2tar} and @command{tar2sqfs} convert between SquashFS and\n"
- "tarballs.\n"
- "@item @command{sqfsdiff} compares the contents of two SquashFS images.\n"
- "@end enumerate\n"
- "\n"
- "These commands are largely command-line wrappers around the included\n"
- "@code{libsquashfs} library that intends to make SquashFS available to other\n"
- "applications as an embeddable, extensible archive format.\n"
- "\n"
- "Both the library and tools operate deterministically: same input will produce\n"
- "byte-for-byte identical output."
- msgstr ""
- #: gnu/packages/compression.scm:1066
- msgid "Parallel implementation of gzip"
- msgstr ""
- #: gnu/packages/compression.scm:1068
- msgid ""
- "This package provides a parallel implementation of gzip that exploits\n"
- "multiple processors and multiple cores when compressing data."
- msgstr ""
- #: gnu/packages/compression.scm:1091
- msgid "Parallel indexing implementation of LZMA"
- msgstr ""
- #: gnu/packages/compression.scm:1093
- msgid ""
- "The existing XZ Utils provide great compression in the .xz file format,\n"
- "but they produce just one big block of compressed data. Pixz instead produces\n"
- "a collection of smaller blocks which makes random access to the original data\n"
- "possible and can compress in parallel. This is especially useful for large\n"
- "tarballs."
- msgstr ""
- #: gnu/packages/compression.scm:1139
- msgid "Tool to unpack Cabinet archives"
- msgstr ""
- #: gnu/packages/compression.scm:1140
- msgid "Extracts files out of Microsoft Cabinet (.cab) archives"
- msgstr ""
- #: gnu/packages/compression.scm:1169
- msgid "Library for reading and writing Jcat files"
- msgstr ""
- #: gnu/packages/compression.scm:1171
- msgid ""
- "This library allows reading and writing gzip-compressed JSON catalog\n"
- "files, which can be used to store GPG, PKCS-7 and SHA-256 checksums for each\n"
- "file."
- msgstr ""
- #: gnu/packages/compression.scm:1204
- msgid "Delta encoder for binary files"
- msgstr ""
- #: gnu/packages/compression.scm:1205
- msgid ""
- "xdelta encodes only the differences between two binary files\n"
- "using the VCDIFF algorithm and patch file format described in RFC 3284. It can\n"
- "also be used to apply such patches. xdelta is similar to @command{diff} and\n"
- "@command{patch}, but is not limited to plain text and does not generate\n"
- "human-readable output."
- msgstr ""
- #: gnu/packages/compression.scm:1234
- msgid "Large file compressor with a very high compression ratio"
- msgstr ""
- #: gnu/packages/compression.scm:1235
- msgid ""
- "lrzip is a compression utility that uses long-range\n"
- "redundancy reduction to improve the subsequent compression ratio of\n"
- "larger files. It can then further compress the result with the ZPAQ or\n"
- "LZMA algorithms for maximum compression, or LZO for maximum speed. This\n"
- "choice between size or speed allows for either better compression than\n"
- "even LZMA can provide, or a higher speed than gzip while compressing as\n"
- "well as bzip2."
- msgstr ""
- #: gnu/packages/compression.scm:1288
- msgid "Fast compressor/decompressor"
- msgstr ""
- #: gnu/packages/compression.scm:1289
- msgid ""
- "Snappy is a compression/decompression library. It does not\n"
- "aim for maximum compression, or compatibility with any other compression library;\n"
- "instead, it aims for very high speeds and reasonable compression. For instance,\n"
- "compared to the fastest mode of zlib, Snappy is an order of magnitude faster\n"
- "for most inputs, but the resulting compressed files are anywhere from 20% to\n"
- "100% bigger."
- msgstr ""
- #: gnu/packages/compression.scm:1404
- msgid "Command-line file archiver with high compression ratio"
- msgstr ""
- #: gnu/packages/compression.scm:1405
- msgid ""
- "p7zip is a command-line port of 7-Zip, a file archiver that\n"
- "handles the 7z format which features very high compression ratios."
- msgstr ""
- #: gnu/packages/compression.scm:1452
- msgid "Compressed C++ iostream"
- msgstr ""
- #: gnu/packages/compression.scm:1453
- msgid ""
- "gzstream is a small library for providing zlib\n"
- "functionality in a C++ iostream."
- msgstr ""
- #: gnu/packages/compression.scm:1475
- msgid "Very good, but slow, deflate or zlib compression"
- msgstr ""
- #: gnu/packages/compression.scm:1476
- msgid ""
- "Zopfli Compression Algorithm is a compression library\n"
- "programmed in C to perform very good, but slow, deflate or zlib compression.\n"
- "ZopfliCompress supports the deflate, gzip and zlib output formats. This\n"
- "library can only compress, not decompress; existing zlib or deflate libraries\n"
- "can decompress the data."
- msgstr ""
- #: gnu/packages/compression.scm:1528
- msgid "Incremental journaling archiver"
- msgstr ""
- #: gnu/packages/compression.scm:1529
- msgid ""
- "ZPAQ is a command-line archiver for realistic situations with\n"
- "many duplicate and already compressed files. It backs up only those files\n"
- "modified since the last update. All previous versions remain untouched and can\n"
- "be independently recovered. Identical files are only stored once (known as\n"
- "@dfn{de-duplication}). Archives can also be encrypted.\n"
- "\n"
- "ZPAQ is intended to back up user data, not entire operating systems. It ignores\n"
- "owner and group IDs, ACLs, extended attributes, or special file types like\n"
- "devices, sockets, or named pipes. It does not follow or restore symbolic links\n"
- "or junctions, and always follows hard links."
- msgstr ""
- #: gnu/packages/compression.scm:1629
- msgid "Extract CAB files from InstallShield installers"
- msgstr ""
- #: gnu/packages/compression.scm:1631
- msgid ""
- "@command{unshield} is a tool and library for extracting @file{.cab}\n"
- " archives from InstallShield installers."
- msgstr ""
- #: gnu/packages/compression.scm:1709
- msgid "Zstandard real-time compression algorithm"
- msgstr ""
- #: gnu/packages/compression.scm:1710
- msgid ""
- "Zstandard (@command{zstd}) is a lossless compression algorithm\n"
- "that combines very fast operation with a compression ratio comparable to that of\n"
- "zlib. In most scenarios, both compression and decompression can be performed in\n"
- "‘real time’. The compressor can be configured to provide the most suitable\n"
- "trade-off between compression ratio and speed, without affecting decompression\n"
- "speed."
- msgstr ""
- #: gnu/packages/compression.scm:1757
- msgid "Threaded implementation of the Zstandard compression algorithm"
- msgstr ""
- #: gnu/packages/compression.scm:1758
- msgid ""
- "Parallel Zstandard (PZstandard or @command{pzstd}) is a\n"
- "multi-threaded implementation of the @uref{http://zstd.net/, Zstandard\n"
- "compression algorithm}. It is fully compatible with the original Zstandard file\n"
- "format and command-line interface, and can be used as a drop-in replacement.\n"
- "\n"
- "Compression is distributed over multiple processor cores to improve performance,\n"
- "as is the decompression of data compressed in this manner. Data compressed by\n"
- "other implementations will only be decompressed by two threads: one performing\n"
- "the actual decompression, the other input and output."
- msgstr ""
- #: gnu/packages/compression.scm:1796
- msgid "Compression and file packing utility"
- msgstr ""
- #: gnu/packages/compression.scm:1798
- msgid ""
- "Zip is a compression and file packaging/archive utility. Zip is useful\n"
- "for packaging a set of files for distribution, for archiving files, and for\n"
- "saving disk space by temporarily compressing unused files or directories.\n"
- "Zip puts one or more compressed files into a single ZIP archive, along with\n"
- "information about the files (name, path, date, time of last modification,\n"
- "protection, and check information to verify file integrity). An entire\n"
- "directory structure can be packed into a ZIP archive with a single command.\n"
- "\n"
- "Zip has one compression method (deflation) and can also store files without\n"
- "compression. Zip automatically chooses the better of the two for each file.\n"
- "Compression ratios of 2:1 to 3:1 are common for text files."
- msgstr ""
- #: gnu/packages/compression.scm:1894
- msgid "Decompression and file extraction utility"
- msgstr ""
- #: gnu/packages/compression.scm:1896
- msgid ""
- "UnZip is an extraction utility for archives compressed in .zip format,\n"
- "also called \"zipfiles\".\n"
- "\n"
- "UnZip lists, tests, or extracts files from a .zip archive. The default\n"
- "behaviour (with no options) is to extract into the current directory, and\n"
- "subdirectories below it, all files from the specified zipfile. UnZip\n"
- "recreates the stored directory structure by default."
- msgstr ""
- #: gnu/packages/compression.scm:1956
- msgid "Normalize @file{.zip} archive header timestamps"
- msgstr ""
- #: gnu/packages/compression.scm:1958
- msgid ""
- "Ziptime helps make @file{.zip} archives reproducible by replacing\n"
- "timestamps in the file header with a fixed time (1 January 2008).\n"
- "\n"
- "``Extra fields'' are not changed, so you'll need to use the @code{-X} option to\n"
- "@command{zip} to prevent it from storing the ``universal time'' field."
- msgstr ""
- #: gnu/packages/compression.scm:1983
- msgid "Library for accessing zip files"
- msgstr ""
- #: gnu/packages/compression.scm:1985
- msgid "ZZipLib is a library based on zlib for accessing zip files."
- msgstr ""
- #: gnu/packages/compression.scm:2008
- msgid "C library for reading, creating, and modifying zip archives"
- msgstr ""
- #: gnu/packages/compression.scm:2009
- msgid ""
- "Libzip is a C library for reading, creating, and modifying\n"
- "zip archives. Files can be added from data buffers, files, or compressed data\n"
- "copied directly from other zip archives. Changes made without closing the\n"
- "archive can be reverted."
- msgstr ""
- #: gnu/packages/compression.scm:2041
- msgid "Universal tool to manage file archives of various types"
- msgstr ""
- #: gnu/packages/compression.scm:2042
- msgid ""
- "The main command is @command{aunpack} which extracts files\n"
- "from an archive. The other commands provided are @command{apack} (to create\n"
- "archives), @command{als} (to list files in archives), and @command{acat} (to\n"
- "extract files to standard out). As @command{atool} invokes external programs\n"
- "to handle the archives, not all commands may be supported for a certain type\n"
- "of archives."
- msgstr ""
- #: gnu/packages/compression.scm:2066
- msgid "Small, stand-alone lzip decompressor"
- msgstr ""
- #: gnu/packages/compression.scm:2068
- msgid ""
- "Lunzip is a decompressor for files in the lzip compression format (.lz),\n"
- "written as a single small C tool with no dependencies. This makes it\n"
- "well-suited to embedded and other systems without a C++ compiler, or for use in\n"
- "applications such as software installers that need only to decompress files,\n"
- "not compress them.\n"
- "Lunzip is intended to be fully compatible with the regular lzip package."
- msgstr ""
- #: gnu/packages/compression.scm:2093
- msgid "Small, stand-alone lzip compressor and decompressor"
- msgstr ""
- #: gnu/packages/compression.scm:2095
- msgid ""
- "Clzip is a compressor and decompressor for files in the lzip compression\n"
- "format (.lz), written as a single small C tool with no dependencies. This makes\n"
- "it well-suited to embedded and other systems without a C++ compiler, or for use\n"
- "in other applications like package managers.\n"
- "Clzip is intended to be fully compatible with the regular lzip package."
- msgstr ""
- #: gnu/packages/compression.scm:2121
- msgid "Lzip data compression C library"
- msgstr ""
- #: gnu/packages/compression.scm:2123
- msgid ""
- "Lzlib is a C library for in-memory LZMA compression and decompression in\n"
- "the lzip format. It supports integrity checking of the decompressed data, and\n"
- "all functions are thread-safe. The library should never crash, even in case of\n"
- "corrupted input."
- msgstr ""
- #: gnu/packages/compression.scm:2145
- msgid "Parallel lossless data compressor for the lzip format"
- msgstr ""
- #: gnu/packages/compression.scm:2147
- msgid ""
- "Plzip is a massively parallel (multi-threaded) lossless data compressor\n"
- "and decompressor that uses the lzip file format (.lz). Files produced by plzip\n"
- "are fully compatible with lzip and can be rescued with lziprecover.\n"
- "On multiprocessor machines, plzip can compress and decompress large files much\n"
- "faster than lzip, at the cost of a slightly reduced compression ratio (0.4% to\n"
- "2%). The number of usable threads is limited by file size: on files of only a\n"
- "few MiB, plzip is no faster than lzip.\n"
- "Files that were compressed with regular lzip will also not be decompressed\n"
- "faster by plzip, unless the @code{-b} option was used: lzip usually produces\n"
- "single-member files which can't be decompressed in parallel."
- msgstr ""
- #: gnu/packages/compression.scm:2178
- msgid "Tool for extracting Inno Setup installers"
- msgstr ""
- #: gnu/packages/compression.scm:2179
- msgid ""
- "innoextract allows extracting Inno Setup installers under\n"
- "non-Windows systems without running the actual installer using wine."
- msgstr ""
- #: gnu/packages/compression.scm:2200
- msgid "Intelligent storage acceleration library"
- msgstr ""
- #: gnu/packages/compression.scm:2201
- msgid ""
- "ISA-L is a collection of optimized low-level functions\n"
- "targeting storage applications. ISA-L includes:\n"
- "\n"
- "@itemize\n"
- "@item Erasure codes: fast block Reed-Solomon type erasure codes for any\n"
- " encode/decode matrix;\n"
- "@item CRC: fast implementations of cyclic redundancy check. Six different\n"
- " polynomials supported: iscsi32, ieee32, t10dif, ecma64, iso64, jones64;\n"
- "@item Raid: calculate and operate on XOR and P+Q parity found in common RAID\n"
- " implementations;\n"
- "@item Compression: fast deflate-compatible data compression;\n"
- "@item De-compression: fast inflate-compatible data compression;\n"
- "@item igzip: command line application like gzip, accelerated with ISA-L.\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/compression.scm:2260
- msgid "General-purpose lossless compression"
- msgstr ""
- #: gnu/packages/compression.scm:2261
- msgid ""
- "This package provides the reference implementation of Brotli,\n"
- "a generic-purpose lossless compression algorithm that compresses data using a\n"
- "combination of a modern variant of the LZ77 algorithm, Huffman coding and 2nd\n"
- "order context modeling, with a compression ratio comparable to the best\n"
- "currently available general-purpose compression methods. It is similar in speed\n"
- "with @code{deflate} but offers more dense compression.\n"
- "\n"
- "The specification of the Brotli Compressed Data Format is defined in RFC 7932."
- msgstr ""
- #: gnu/packages/compression.scm:2280
- msgid "Python interface to Brotli"
- msgstr ""
- #: gnu/packages/compression.scm:2281
- msgid ""
- "This package provides a Python interface to the @code{brotli}\n"
- "package, an implementation of the Brotli lossless compression algorithm."
- msgstr ""
- #: gnu/packages/compression.scm:2317
- msgid "Portable lossless data compression library"
- msgstr ""
- #: gnu/packages/compression.scm:2318
- msgid ""
- "UCL implements a number of compression algorithms that\n"
- "achieve an excellent compression ratio while allowing fast decompression.\n"
- "Decompression requires no additional memory.\n"
- "\n"
- "Compared to LZO, the UCL algorithms achieve a better compression ratio but\n"
- "decompression is a little bit slower."
- msgstr ""
- #: gnu/packages/compression.scm:2340
- msgid "Compression tool for executables"
- msgstr ""
- #: gnu/packages/compression.scm:2342
- msgid ""
- "The Ultimate Packer for eXecutables (UPX) is an executable file\n"
- "compressor. UPX typically reduces the file size of programs and shared\n"
- "libraries by around 50%--70%, thus reducing disk space, network load times,\n"
- "download times, and other distribution and storage costs."
- msgstr ""
- #: gnu/packages/compression.scm:2369
- msgid "Qt/C++ wrapper for Minizip"
- msgstr ""
- #: gnu/packages/compression.scm:2370
- msgid ""
- "QuaZIP is a simple C++ wrapper over Gilles Vollant's\n"
- "ZIP/UNZIP package that can be used to access ZIP archives. It uses\n"
- "Trolltech's Qt toolkit.\n"
- "\n"
- "QuaZIP allows you to access files inside ZIP archives using QIODevice\n"
- "API, and that means that you can also use QTextStream, QDataStream or\n"
- "whatever you would like to use on your zipped files.\n"
- "\n"
- "QuaZIP provides complete abstraction of the ZIP/UNZIP API, for both\n"
- "reading from and writing to ZIP archives."
- msgstr ""
- #: gnu/packages/compression.scm:2428
- msgid "Compressed file format for efficient deltas"
- msgstr ""
- #: gnu/packages/compression.scm:2429
- msgid ""
- "The zchunk compressed file format allows splitting a file\n"
- "into independent chunks. This makes it possible to retrieve only changed\n"
- "chunks when downloading a new version of the file, and also makes zchunk files\n"
- "efficient over rsync. Along with the library, this package provides the\n"
- "following utilities:\n"
- "@table @command\n"
- "@item unzck\n"
- "To decompress a zchunk file.\n"
- "@item zck\n"
- "To compress a new zchunk file, or re-compress an existing one.\n"
- "@item zck_delta_size\n"
- "To calculate the difference between two zchunk files.\n"
- "@item zck_gen_zdict\n"
- "To create a dictionary for a zchunk file.\n"
- "@item zck_read_header\n"
- "To read a zchunk header.\n"
- "@item zckdl\n"
- "To download a zchunk file.\n"
- "@end table"
- msgstr ""
- #: gnu/packages/compression.scm:2483
- msgid "Utilities that transparently operate on compressed files"
- msgstr ""
- #: gnu/packages/compression.scm:2485
- msgid ""
- "Zutils is a collection of utilities able to process any combination of\n"
- "compressed and uncompressed files transparently. If any given file, including\n"
- "standard input, is compressed, its decompressed content is used instead.\n"
- "\n"
- "@command{zcat}, @command{zcmp}, @command{zdiff}, and @command{zgrep} are\n"
- "improved replacements for the shell scripts provided by GNU gzip.\n"
- "@command{ztest} tests the integrity of supported compressed files.\n"
- "@command{zupdate} recompresses files with lzip, similar to gzip's\n"
- "@command{znew}.\n"
- "\n"
- "Supported compression formats are bzip2, gzip, lzip, and xz. Zutils uses\n"
- "external compressors: the compressor to be used for each format is configurable\n"
- "at run time, and must be installed separately."
- msgstr ""
- #: gnu/packages/compression.scm:2542
- msgid "Extract makeself and mojo archives without running untrusted code"
- msgstr ""
- #: gnu/packages/compression.scm:2543
- msgid ""
- "This package provides a script to unpack self-extracting\n"
- "archives generated by @command{makeself} or @command{mojo} without running the\n"
- "possibly untrusted extraction shell script."
- msgstr ""
- #: gnu/packages/compression.scm:2570
- msgid "Original Lempel-Ziv compress/uncompress programs"
- msgstr ""
- #: gnu/packages/compression.scm:2571
- msgid ""
- "(N)compress provides the original compress and uncompress\n"
- "programs that used to be the de facto UNIX standard for compressing and\n"
- "uncompressing files. These programs implement a fast, simple Lempel-Ziv (LZW)\n"
- "file compression algorithm."
- msgstr ""
- #: gnu/packages/compression.scm:2597
- msgid "Graphical front-end for archive operations"
- msgstr ""
- #: gnu/packages/compression.scm:2598
- msgid ""
- "Xarchiver is a front-end to various command line archiving\n"
- "tools. It uses GTK+ tool-kit and is designed to be desktop-environment\n"
- "independent. Supported formats are 7z, ARJ, bzip2, gzip, LHA, lzma, lzop,\n"
- "RAR, RPM, DEB, tar, and ZIP. It cannot perform functions for archives, whose\n"
- "archiver is not installed."
- msgstr ""
- #: gnu/packages/compression.scm:2633
- msgid "Multithreaded tar utility"
- msgstr ""
- #: gnu/packages/compression.scm:2635
- msgid ""
- "Archive huge numbers of files, or split massive tar archives into smaller\n"
- "chunks."
- msgstr ""
- #: gnu/packages/compression.scm:2667
- msgid "Blocking, shuffling and lossless compression library"
- msgstr ""
- #: gnu/packages/compression.scm:2669
- msgid ""
- "Blosc is a high performance compressor optimized for binary data. It has\n"
- "been designed to transmit data to the processor cache faster than the\n"
- "traditional, non-compressed, direct memory fetch approach via a\n"
- "@code{memcpy()} system call. Blosc is meant not only to reduce the size of\n"
- "large datasets on-disk or in-memory, but also to accelerate memory-bound\n"
- "computations."
- msgstr ""
- #: gnu/packages/compression.scm:2706
- msgid "Error code modeler"
- msgstr ""
- #: gnu/packages/compression.scm:2707
- msgid ""
- "ECM is a utility that converts ECM files, i.e., CD data files\n"
- "with their error correction data losslessly rearranged for better compression,\n"
- "to their original, binary CD format."
- msgstr ""
- #: gnu/packages/compression.scm:2737
- msgid "Library for DEFLATE/zlib/gzip compression and decompression"
- msgstr ""
- #: gnu/packages/compression.scm:2738
- msgid ""
- "Libdeflate is a library for fast, whole-buffer DEFLATE-based\n"
- "compression and decompression. The supported formats are:\n"
- "\n"
- "@enumerate\n"
- "@item DEFLATE (raw)\n"
- "@item zlib (a.k.a. DEFLATE with a zlib wrapper)\n"
- "@item gzip (a.k.a. DEFLATE with a gzip wrapper)\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/compression.scm:2766
- msgid "Combination of the tar archiver and the lzip compressor"
- msgstr ""
- #: gnu/packages/compression.scm:2768
- msgid ""
- "Tarlz is a massively parallel (multi-threaded) combined implementation of\n"
- "the tar archiver and the lzip compressor. Tarlz creates, lists, and extracts\n"
- "archives in a simplified and safer variant of the POSIX pax format compressed\n"
- "with lzip, keeping the alignment between tar members and lzip members. The\n"
- "resulting multimember tar.lz archive is fully backward compatible with standard\n"
- "tar tools like GNU tar, which treat it like any other tar.lz archive. Tarlz\n"
- "can append files to the end of such compressed archives."
- msgstr ""
- #: gnu/packages/compression.scm:2800
- msgid "The C library for parsing and generating CBOR"
- msgstr ""
- #: gnu/packages/compression.scm:2802
- msgid ""
- "@acronym{CBOR, The Concise Binary Object Representation} is a data format\n"
- "whose design goals include the possibility of extremely small code size, fairly\n"
- "small message size, and extensibility without the need for version\n"
- "negotiation. These design goals make it different from earlier binary\n"
- "serializations such as ASN.1 and MessagePack."
- msgstr ""
- #: gnu/packages/compression.scm:2825
- msgid "LZFSE compression library and command line tool"
- msgstr ""
- #: gnu/packages/compression.scm:2826
- msgid ""
- "LZFSE is a Lempel-Ziv style data compression algorithm using\n"
- "Finite State Entropy coding. It targets similar compression rates at higher\n"
- "compression and decompression speed compared to Deflate using Zlib."
- msgstr ""
- #: gnu/packages/compression.scm:2855
- msgid "Zip password cracker"
- msgstr ""
- #: gnu/packages/compression.scm:2856
- msgid "Fcrackzip is a Zip file password cracker."
- msgstr ""
- #: gnu/packages/compression.scm:2880
- msgid "Extract files from RAR archives"
- msgstr ""
- #: gnu/packages/compression.scm:2882
- msgid ""
- "@code{unrar-free} is a free software version of the non-free @code{unrar}\n"
- "utility. This program is a simple command-line front-end to libarchive, and can\n"
- "list and extract not only RAR archives but also other formats supported by\n"
- "libarchive. It does not rival the non-free @code{unrar} in terms of features,\n"
- "but special care has been taken to ensure it meets most user's needs."
- msgstr ""
- #: gnu/packages/databases.scm:224
- msgid "Run temporary PostgreSQL databases"
- msgstr ""
- #: gnu/packages/databases.scm:226
- msgid ""
- "@code{pg_tmp} creates temporary PostgreSQL databases, suitable for tasks\n"
- "like running software test suites. Temporary databases created with\n"
- "@code{pg_tmp} have a limited shared memory footprint and are automatically\n"
- "garbage-collected after a configurable number of seconds (the default is\n"
- "60)."
- msgstr ""
- #: gnu/packages/databases.scm:250
- msgid "Utility for dumping and restoring ElasticSearch indexes"
- msgstr ""
- #: gnu/packages/databases.scm:252
- msgid ""
- "This package provides a utility for dumping the contents of an\n"
- "ElasticSearch index to a compressed file and restoring the dumpfile back to an\n"
- "ElasticSearch server"
- msgstr ""
- #: gnu/packages/databases.scm:408
- msgid "Relational database with many ANSI SQL standard features"
- msgstr ""
- #: gnu/packages/databases.scm:410
- msgid ""
- "Firebird is an SQL @acronym{RDBMS, relational database management system}\n"
- "with rich support for ANSI SQL (e.g., @code{INSERT...RETURNING}) including\n"
- "@acronym{UDFs, user-defined functions} and PSQL stored procedures, cursors, and\n"
- "triggers. Transactions provide full ACID-compliant referential integrity.\n"
- "\n"
- "The database requires very little manual maintenance once set up, making it\n"
- "ideal for small business or embedded use.\n"
- "\n"
- "When installed as a traditional local or remote (network) database server,\n"
- "Firebird can grow to terabyte scale with proper tuning---although PostgreSQL\n"
- "may be a better choice for such very large environments.\n"
- "\n"
- "Firebird can also be embedded into stand-alone applications that don't want or\n"
- "need a full client & server. Used in this manner, it offers richer SQL support\n"
- "than SQLite as well as the option to seamlessly migrate to a client/server\n"
- "database later."
- msgstr ""
- #: gnu/packages/databases.scm:479
- msgid "Fast key-value storage library"
- msgstr ""
- #: gnu/packages/databases.scm:481
- msgid ""
- "LevelDB is a fast key-value storage library that provides an ordered\n"
- "mapping from string keys to string values."
- msgstr ""
- #: gnu/packages/databases.scm:500
- msgid "In-memory caching service"
- msgstr ""
- #: gnu/packages/databases.scm:501
- msgid ""
- "Memcached is an in-memory key-value store. It has a small\n"
- "and generic API, and was originally intended for use with dynamic web\n"
- "applications."
- msgstr ""
- #: gnu/packages/databases.scm:562
- msgid "C++ library for memcached"
- msgstr ""
- #: gnu/packages/databases.scm:563
- msgid ""
- "libMemcached is a library to use memcached in C/C++\n"
- "applications. It comes with a complete reference guide and documentation of\n"
- "the API, and provides features such as:\n"
- "@itemize\n"
- "@item Asynchronous and synchronous transport support\n"
- "@item Consistent hashing and distribution\n"
- "@item Tunable hashing algorithm to match keys\n"
- "@item Access to large object support\n"
- "@item Local replication\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/databases.scm:598
- msgid "Python client for memcached"
- msgstr ""
- #: gnu/packages/databases.scm:600
- msgid ""
- "@code{pylibmc} is a client in Python for memcached. It is a wrapper\n"
- "around TangentOrg’s libmemcached library, and can be used as a drop-in\n"
- "replacement for the code@{python-memcached} library."
- msgstr ""
- #: gnu/packages/databases.scm:630
- msgid "Memcache client library in Go"
- msgstr ""
- #: gnu/packages/databases.scm:632
- msgid "This is a memcache client library for the Go programming language."
- msgstr ""
- #: gnu/packages/databases.scm:653
- msgid "Memcached binary protocol toolkit for go"
- msgstr ""
- #: gnu/packages/databases.scm:655
- msgid "This package provides memcache client and server functionality."
- msgstr "이 꾸러미는 memcache 클라이언트와 서버 기능을 제공합니다."
- #: gnu/packages/databases.scm:679
- msgid "CLI for SQLite databases"
- msgstr ""
- #: gnu/packages/databases.scm:681
- msgid ""
- "@code{litecli} is a command-line client for SQLite databases that has\n"
- "auto-completion and syntax highlighting."
- msgstr ""
- #: gnu/packages/databases.scm:700
- msgid "Python implementation of PostgreSQL meta commands (backslash commands)"
- msgstr ""
- #: gnu/packages/databases.scm:702
- msgid ""
- "This Python package provides an API to execute meta-commands (AKA\n"
- "\"special\", or \"backslash commands\") on PostgreSQL."
- msgstr ""
- #: gnu/packages/databases.scm:731
- msgid "Persistent dict backed up by sqlite3 and pickle"
- msgstr ""
- #: gnu/packages/databases.scm:733
- msgid ""
- "This package provides a lightweight wrapper around the sqlite3 database\n"
- "with a simple, Pythonic @code{dict}-like interface and support for\n"
- "multi-thread access."
- msgstr ""
- #: gnu/packages/databases.scm:763
- msgid "PostgreSQL CLI with autocompletion and syntax highlighting"
- msgstr ""
- #: gnu/packages/databases.scm:765
- msgid ""
- "@code{pgcli} is a command line interface for PostgreSQL with\n"
- "autocompletion and syntax highlighting."
- msgstr ""
- #: gnu/packages/databases.scm:795
- msgid "Terminal Client for MySQL with AutoCompletion and Syntax Highlighting"
- msgstr ""
- #: gnu/packages/databases.scm:797
- msgid ""
- "MyCLI is a command line interface for MySQL, MariaDB, and Percona with\n"
- "auto-completion and syntax highlighting."
- msgstr ""
- #: gnu/packages/databases.scm:892
- msgid "Fast, easy to use, and popular database"
- msgstr ""
- #: gnu/packages/databases.scm:894
- msgid ""
- "MySQL is a fast, reliable, and easy to use relational database\n"
- "management system that supports the standardized Structured Query\n"
- "Language."
- msgstr ""
- #: gnu/packages/databases.scm:1169
- msgid "SQL database server"
- msgstr ""
- #: gnu/packages/databases.scm:1171
- msgid ""
- "MariaDB is a multi-user and multi-threaded SQL database server, designed\n"
- "as a drop-in replacement of MySQL."
- msgstr ""
- #: gnu/packages/databases.scm:1195
- msgid "Client library to connect to MySQL or MariaDB"
- msgstr ""
- #: gnu/packages/databases.scm:1196
- msgid ""
- "The MariaDB Connector/C is used to connect applications\n"
- "developed in C/C++ to MariaDB and MySQL databases."
- msgstr ""
- #: gnu/packages/databases.scm:1217
- msgid "Extension to the MariaDB database server"
- msgstr ""
- #: gnu/packages/databases.scm:1219
- msgid ""
- "Galera is a wsrep-provider that is used with MariaDB for load-balancing\n"
- "and high-availability (HA)."
- msgstr ""
- #: gnu/packages/databases.scm:1276
- msgid "Powerful object-relational database system"
- msgstr ""
- #: gnu/packages/databases.scm:1278
- msgid ""
- "PostgreSQL is a powerful object-relational database system. It is fully\n"
- "ACID compliant, has full support for foreign keys, joins, views, triggers, and\n"
- "stored procedures (in multiple languages). It includes most SQL:2008 data\n"
- "types, including INTEGER, NUMERIC, BOOLEAN, CHAR, VARCHAR, DATE, INTERVAL, and\n"
- "TIMESTAMP. It also supports storage of binary large objects, including\n"
- "pictures, sounds, or video."
- msgstr ""
- #: gnu/packages/databases.scm:1442
- msgid "Time-series extension for PostgreSQL"
- msgstr ""
- #: gnu/packages/databases.scm:1444
- msgid ""
- "TimescaleDB is a database designed to make SQL scalable for\n"
- "time-series data. It is engineered up from PostgreSQL and packaged as a\n"
- "PostgreSQL extension, providing automatic partitioning across time and space\n"
- "(partitioning key), as well as full SQL support."
- msgstr ""
- #: gnu/packages/databases.scm:1523
- msgid "Tool to migrate data to PostgreSQL"
- msgstr ""
- #: gnu/packages/databases.scm:1525
- msgid ""
- "@code{pgloader} is a program that can load data or migrate databases from\n"
- "CSV, DB3, iXF, SQLite, MS-SQL or MySQL to PostgreSQL."
- msgstr ""
- #: gnu/packages/databases.scm:1545
- msgid "Pure-Python MySQL driver"
- msgstr ""
- #: gnu/packages/databases.scm:1547
- msgid ""
- "PyMySQL is a pure-Python MySQL client library, based on PEP 249.\n"
- "Most public APIs are compatible with @command{mysqlclient} and MySQLdb."
- msgstr ""
- #: gnu/packages/databases.scm:1570
- msgid "Key-value database"
- msgstr ""
- #: gnu/packages/databases.scm:1571
- msgid ""
- "QDBM is a library of routines for managing a\n"
- "database. The database is a simple data file containing key-value\n"
- "pairs. Every key and value is serial bytes with variable length.\n"
- "Binary data as well as character strings can be used as a key or a\n"
- "value. There is no concept of data tables or data types. Records are\n"
- "organized in a hash table or B+ tree."
- msgstr ""
- #: gnu/packages/databases.scm:1609
- msgid "Manipulate plain text files as databases"
- msgstr ""
- #: gnu/packages/databases.scm:1611
- msgid ""
- "GNU Recutils is a set of tools and libraries for creating and\n"
- "manipulating text-based, human-editable databases. Despite being text-based,\n"
- "databases created with Recutils carry all of the expected features such as\n"
- "unique fields, primary keys, time stamps and more. Many different field\n"
- "types are supported, as is encryption."
- msgstr ""
- #: gnu/packages/databases.scm:1649
- msgid "Emacs mode for working with recutils database files"
- msgstr ""
- #: gnu/packages/databases.scm:1650
- msgid ""
- "This package provides an Emacs major mode @code{rec-mode}\n"
- "for working with GNU Recutils text-based, human-editable databases. It\n"
- "supports editing, navigation, and querying of recutils database files\n"
- "including field and record folding."
- msgstr ""
- #: gnu/packages/databases.scm:1716
- msgid "Persistent key-value store for fast storage"
- msgstr ""
- #: gnu/packages/databases.scm:1718
- msgid ""
- "RocksDB is a library that forms the core building block for a fast\n"
- "key-value server, especially suited for storing data on flash drives. It\n"
- "has a @dfn{Log-Structured-Merge-Database} (LSM) design with flexible tradeoffs\n"
- "between @dfn{Write-Amplification-Factor} (WAF), @dfn{Read-Amplification-Factor}\n"
- "(RAF) and @dfn{Space-Amplification-Factor} (SAF). It has multi-threaded\n"
- "compactions, making it specially suitable for storing multiple terabytes of\n"
- "data in a single database. RocksDB is partially based on @code{LevelDB}."
- msgstr ""
- #: gnu/packages/databases.scm:1775
- msgid "Command-line tool for accessing SPARQL endpoints over HTTP"
- msgstr ""
- #: gnu/packages/databases.scm:1776
- msgid ""
- "Sparql-query is a command-line tool for accessing SPARQL\n"
- "endpoints over HTTP. It has been intentionally designed to @code{feel} similar to\n"
- "tools for interrogating SQL databases. For example, you can enter a query over\n"
- "several lines, using a semi-colon at the end of a line to indicate the end of\n"
- "your query. It also supports readline so that you can more easily recall and\n"
- "edit previous queries, even across sessions. It can be used non-interactively,\n"
- "for example from a shell script."
- msgstr ""
- #: gnu/packages/databases.scm:1867
- msgid "Database change management tool"
- msgstr ""
- #: gnu/packages/databases.scm:1869
- msgid ""
- "Sqitch is a standalone change management system for database schemas,\n"
- "which uses SQL to describe changes."
- msgstr ""
- #: gnu/packages/databases.scm:1894
- msgid "Text console-based database viewer and editor"
- msgstr ""
- #: gnu/packages/databases.scm:1896
- msgid ""
- "SQLcrush lets you view and edit a database directly from the text\n"
- "console through an ncurses interface. You can explore each table's structure,\n"
- "browse and edit the contents, add and delete entries, all while tracking your\n"
- "changes."
- msgstr ""
- #: gnu/packages/databases.scm:1932
- msgid "Trivial database"
- msgstr ""
- #: gnu/packages/databases.scm:1934
- msgid ""
- "TDB is a Trivial Database. In concept, it is very much like GDBM,\n"
- "and BSD's DB except that it allows multiple simultaneous writers and uses\n"
- "locking internally to keep writers from trampling on each other. TDB is also\n"
- "extremely small."
- msgstr ""
- #: gnu/packages/databases.scm:1953
- msgid "Database independent interface for Perl"
- msgstr "펄을 위한 데이타베이스 독립 연결장치."
- #: gnu/packages/databases.scm:1954
- msgid "This package provides a database interface for Perl."
- msgstr "이 꾸러미는 펄을 위한 데이타베이스 연결장치를 제공합니다."
- #: gnu/packages/databases.scm:2001
- msgid "Extensible and flexible object <-> relational mapper"
- msgstr ""
- #: gnu/packages/databases.scm:2002
- msgid ""
- "An SQL to OO mapper with an object API inspired by\n"
- "Class::DBI (with a compatibility layer as a springboard for porting) and a\n"
- "resultset API that allows abstract encapsulation of database operations. It\n"
- "aims to make representing queries in your code as perl-ish as possible while\n"
- "still providing access to as many of the capabilities of the database as\n"
- "possible, including retrieving related records from multiple tables in a\n"
- "single query, \"JOIN\", \"LEFT JOIN\", \"COUNT\", \"DISTINCT\", \"GROUP BY\",\n"
- "\"ORDER BY\" and \"HAVING\" support."
- msgstr ""
- #: gnu/packages/databases.scm:2030
- msgid "Cursor with built-in caching support"
- msgstr ""
- #: gnu/packages/databases.scm:2031
- msgid ""
- "DBIx::Class::Cursor::Cached provides a cursor class with\n"
- "built-in caching support."
- msgstr ""
- #: gnu/packages/databases.scm:2053
- msgid "Introspect many-to-many relationships"
- msgstr ""
- #: gnu/packages/databases.scm:2054
- msgid ""
- "Because the many-to-many relationships are not real\n"
- "relationships, they can not be introspected with DBIx::Class. Many-to-many\n"
- "relationships are actually just a collection of convenience methods installed\n"
- "to bridge two relationships. This DBIx::Class component can be used to store\n"
- "all relevant information about these non-relationships so they can later be\n"
- "introspected and examined."
- msgstr ""
- #: gnu/packages/databases.scm:2112
- msgid "Create a DBIx::Class::Schema based on a database"
- msgstr ""
- #: gnu/packages/databases.scm:2113
- msgid ""
- "DBIx::Class::Schema::Loader automates the definition of a\n"
- "DBIx::Class::Schema by scanning database table definitions and setting up the\n"
- "columns, primary keys, unique constraints and relationships."
- msgstr ""
- #: gnu/packages/databases.scm:2136
- msgid "DBI PostgreSQL interface"
- msgstr ""
- #: gnu/packages/databases.scm:2137
- msgid ""
- "This package provides a PostgreSQL driver for the Perl5\n"
- "@dfn{Database Interface} (DBI)."
- msgstr ""
- #: gnu/packages/databases.scm:2174
- msgid "DBI MySQL interface"
- msgstr ""
- #: gnu/packages/databases.scm:2175
- msgid ""
- "This package provides a MySQL driver for the Perl5\n"
- "@dfn{Database Interface} (DBI)."
- msgstr ""
- #: gnu/packages/databases.scm:2194
- msgid "SQlite interface for Perl"
- msgstr ""
- #: gnu/packages/databases.scm:2195
- msgid ""
- "DBD::SQLite is a Perl DBI driver for SQLite, that includes\n"
- "the entire thing in the distribution. So in order to get a fast transaction\n"
- "capable RDBMS working for your Perl project you simply have to install this\n"
- "module, and nothing else."
- msgstr ""
- #: gnu/packages/databases.scm:2218
- #, scheme-format
- msgid "Parse and utilize MySQL's /etc/my.cnf and ~/.my.cnf files"
- msgstr ""
- #: gnu/packages/databases.scm:2220
- msgid ""
- "@code{MySQL::Config} emulates the @code{load_defaults} function from\n"
- "libmysqlclient. It will fill an array with long options, ready to be parsed by\n"
- "@code{Getopt::Long}."
- msgstr ""
- #: gnu/packages/databases.scm:2243 gnu/packages/databases.scm:2269
- msgid "Generate SQL from Perl data structures"
- msgstr ""
- #: gnu/packages/databases.scm:2244
- msgid ""
- "This module was inspired by the excellent DBIx::Abstract.\n"
- "While based on the concepts used by DBIx::Abstract, the concepts used have\n"
- "been modified to make the SQL easier to generate from Perl data structures.\n"
- "The underlying idea is for this module to do what you mean, based on the data\n"
- "structures you provide it, so that you don't have to modify your code every\n"
- "time your data changes."
- msgstr ""
- #: gnu/packages/databases.scm:2271
- msgid ""
- "This module is nearly identical to @code{SQL::Abstract} 1.81, and exists\n"
- "to preserve the ability of users to opt into the new way of doing things in\n"
- "later versions according to their own schedules.\n"
- "\n"
- "It is an abstract SQL generation module based on the concepts used by\n"
- "@code{DBIx::Abstract}, with several important differences, especially when it\n"
- "comes to @code{WHERE} clauses. These concepts were modified to make the SQL\n"
- "easier to generate from Perl data structures.\n"
- "\n"
- "The underlying idea is for this module to do what you mean, based on the data\n"
- "structures you provide it. You shouldn't have to modify your code every time\n"
- "your data changes, as this module figures it out."
- msgstr ""
- #: gnu/packages/databases.scm:2303
- msgid "Split SQL code into atomic statements"
- msgstr ""
- #: gnu/packages/databases.scm:2304
- msgid ""
- "This module tries to split any SQL code, even including\n"
- "non-standard extensions, into the atomic statements it is composed of."
- msgstr ""
- #: gnu/packages/databases.scm:2322
- msgid "SQL tokenizer"
- msgstr ""
- #: gnu/packages/databases.scm:2323
- msgid ""
- "SQL::Tokenizer is a tokenizer for SQL queries. It does not\n"
- "claim to be a parser or query verifier. It just creates sane tokens from a\n"
- "valid SQL query."
- msgstr ""
- #: gnu/packages/databases.scm:2341
- msgid "Data source abstraction library"
- msgstr ""
- #: gnu/packages/databases.scm:2342
- msgid ""
- "Unixodbc is a library providing an API with which to access\n"
- "data sources. Data sources include SQL Servers and any software with an ODBC\n"
- "Driver."
- msgstr ""
- #: gnu/packages/databases.scm:2373
- msgid "C++ wrapper for the native C ODBC API"
- msgstr ""
- #: gnu/packages/databases.scm:2374
- msgid ""
- "The goal for nanodbc is to make developers happy by providing\n"
- "a simpler and less verbose API for working with ODBC. Common tasks should be\n"
- "easy, requiring concise and simple code."
- msgstr ""
- #: gnu/packages/databases.scm:2433
- msgid "In-memory key/value and document store"
- msgstr ""
- #: gnu/packages/databases.scm:2435
- msgid ""
- "UnQLite is an in-process software library which implements a\n"
- "self-contained, serverless, zero-configuration, transactional NoSQL\n"
- "database engine. UnQLite is a document store database similar to\n"
- "Redis, CouchDB, etc., as well as a standard key/value store\n"
- "similar to BerkeleyDB, LevelDB, etc."
- msgstr ""
- #: gnu/packages/databases.scm:2485
- msgid "Key-value cache and store"
- msgstr ""
- #: gnu/packages/databases.scm:2486
- msgid ""
- "Redis is an advanced key-value cache and store. Redis\n"
- "supports many data structures including strings, hashes, lists, sets, sorted\n"
- "sets, bitmaps and hyperloglogs."
- msgstr ""
- #: gnu/packages/databases.scm:2509
- msgid "Minimalistic C client library for the Redis database"
- msgstr ""
- #: gnu/packages/databases.scm:2510
- msgid ""
- "This package provides a library for sending commands and\n"
- "receiving replies to and from a Redis server. It comes with a synchronous\n"
- "API, asynchronous API and reply parsing API. Only the binary-safe Redis\n"
- "protocol is supported."
- msgstr ""
- #: gnu/packages/databases.scm:2531
- msgid "Ruby client for Redis' API"
- msgstr ""
- #: gnu/packages/databases.scm:2533
- msgid ""
- "This package provides a Ruby client that tries to match Redis' API\n"
- "one-to-one, while still providing an idiomatic interface."
- msgstr ""
- #: gnu/packages/databases.scm:2556
- msgid "Redis RDB parser for Go"
- msgstr ""
- #: gnu/packages/databases.scm:2558
- msgid "Package rdb implements parsing and encoding of the Redis RDB file format."
- msgstr ""
- #: gnu/packages/databases.scm:2582
- msgid "Go client for Redis"
- msgstr ""
- #: gnu/packages/databases.scm:2584
- msgid "Redigo is a Go client for the Redis database."
- msgstr ""
- #: gnu/packages/databases.scm:2608
- msgid "Kyoto Cabinet is a modern implementation of the DBM database"
- msgstr ""
- #: gnu/packages/databases.scm:2610
- msgid ""
- "Kyoto Cabinet is a standalone file-based database that supports Hash\n"
- "and B+ Tree data storage models. It is a fast key-value lightweight\n"
- "database and supports many programming languages. It is a NoSQL database."
- msgstr ""
- #: gnu/packages/databases.scm:2636
- msgid "Tokyo Cabinet is a modern implementation of the DBM database"
- msgstr ""
- #: gnu/packages/databases.scm:2638
- msgid ""
- "Tokyo Cabinet is a library of routines for managing a database.\n"
- "The database is a simple data file containing records, each is a pair of a\n"
- "key and a value. Every key and value is serial bytes with variable length.\n"
- "Both binary data and character string can be used as a key and a value.\n"
- "There is neither concept of data tables nor data types. Records are\n"
- "organized in hash table, B+ tree, or fixed-length array."
- msgstr ""
- #: gnu/packages/databases.scm:2672
- msgid "NoSQL data engine"
- msgstr ""
- #: gnu/packages/databases.scm:2674
- msgid ""
- "WiredTiger is an extensible platform for data management. It supports\n"
- "row-oriented storage (where all columns of a row are stored together),\n"
- "column-oriented storage (where columns are stored in groups, allowing for\n"
- "more efficient access and storage of column subsets) and log-structured merge\n"
- "trees (LSM), for sustained throughput under random insert workloads."
- msgstr ""
- #: gnu/packages/databases.scm:2722
- msgid "WiredTiger bindings for GNU Guile"
- msgstr ""
- #: gnu/packages/databases.scm:2724
- msgid ""
- "This package provides Guile bindings to the WiredTiger ``NoSQL''\n"
- "database."
- msgstr ""
- #: gnu/packages/databases.scm:2752
- msgid "Perl5 access to Berkeley DB version 1.x"
- msgstr ""
- #: gnu/packages/databases.scm:2754
- msgid "The DB::File module provides Perl bindings to the Berkeley DB version 1.x."
- msgstr ""
- #: gnu/packages/databases.scm:2800
- msgid "Lightning Memory-Mapped Database library"
- msgstr ""
- #: gnu/packages/databases.scm:2802
- msgid ""
- "The @dfn{Lightning Memory-Mapped Database} (LMDB) is a high-performance\n"
- "transactional database. Unlike more complex relational databases, LMDB handles\n"
- "only key-value pairs (stored as arbitrary byte arrays) and relies on the\n"
- "underlying operating system for caching and locking, keeping the code small and\n"
- "simple.\n"
- "The use of ‘zero-copy’ memory-mapped files combines the persistence of classic\n"
- "disk-based databases with high read performance that scales linearly over\n"
- "multiple cores. The size of each database is limited only by the size of the\n"
- "virtual address space — not physical RAM."
- msgstr ""
- #: gnu/packages/databases.scm:2835
- msgid "C++11 wrapper for the LMDB embedded B+ tree database library"
- msgstr ""
- #: gnu/packages/databases.scm:2836
- msgid ""
- "@code{lmdbxx} is a comprehensive @code{C++} wrapper for the\n"
- "@code{LMDB} embedded database library, offering both an error-checked\n"
- "procedural interface and an object-oriented resource interface with RAII\n"
- "semantics."
- msgstr ""
- #: gnu/packages/databases.scm:2859
- msgid "C++ connector for PostgreSQL"
- msgstr ""
- #: gnu/packages/databases.scm:2861
- msgid ""
- "Libpqxx is a C++ library to enable user programs to communicate with the\n"
- "PostgreSQL database back-end. The database back-end can be local or it may be\n"
- "on another machine, accessed via TCP/IP."
- msgstr ""
- #: gnu/packages/databases.scm:2888
- msgid "Embedded key/value database for Go"
- msgstr ""
- #: gnu/packages/databases.scm:2889
- msgid ""
- "Bolt is a pure Go key/value store inspired by Howard Chu's\n"
- "LMDB project. The goal of the project is to provide a simple, fast, and\n"
- "reliable database for projects that don't require a full database server such as\n"
- "Postgres or MySQL."
- msgstr ""
- #: gnu/packages/databases.scm:2913
- msgid "Small object-relational mapping utility"
- msgstr ""
- #: gnu/packages/databases.scm:2915
- msgid ""
- "Peewee is a simple and small ORM (object-relation mapping) tool. Peewee\n"
- "handles converting between pythonic values and those used by databases, so you\n"
- "can use Python types in your code without having to worry. It has built-in\n"
- "support for sqlite, mysql and postgresql. If you already have a database, you\n"
- "can autogenerate peewee models using @code{pwiz}, a model generator."
- msgstr ""
- #: gnu/packages/databases.scm:2934
- msgid "Pypika fork for tortoise-orm"
- msgstr ""
- #: gnu/packages/databases.scm:2935
- msgid ""
- "Pypika-tortoise is a fork of pypika which has been\n"
- "streamlined for its use in the context of tortoise-orm. It removes support\n"
- "for many database kinds that tortoise-orm doesn't need, for example."
- msgstr ""
- #: gnu/packages/databases.scm:2954
- msgid "Sphinx extension to support coroutines in markup"
- msgstr ""
- #: gnu/packages/databases.scm:2955
- msgid ""
- "This package is a Sphinx extension providing additional\n"
- "coroutine-specific markup."
- msgstr ""
- #: gnu/packages/databases.scm:2977
- msgid "Fast PostgreSQL database client library for Python"
- msgstr ""
- #: gnu/packages/databases.scm:2978
- msgid ""
- "@code{asyncpg} is a database interface library designed\n"
- "specifically for PostgreSQL and Python/asyncio. @code{asyncpg} is an\n"
- "efficient, clean implementation of PostgreSQL server binary protocol for use\n"
- "with Python's asyncio framework."
- msgstr ""
- #: gnu/packages/databases.scm:2997
- msgid "Fast MySQL driver for Python"
- msgstr ""
- #: gnu/packages/databases.scm:2998
- msgid ""
- "@code{asyncmy} is a fast @code{asyncio} MySQL driver, which\n"
- "reuses most of @code{pymysql} and @code{aiomysql} but rewrites the core\n"
- "protocol with Cython for performance."
- msgstr ""
- #: gnu/packages/databases.scm:3017
- msgid "MySQL driver for Python"
- msgstr ""
- #: gnu/packages/databases.scm:3018
- msgid ""
- "@code{aiomysql} is a driver for accessing a MySQL database\n"
- "from the @code{asyncio} Python framework. It depends on and reuses most parts\n"
- "of PyMySQL. @code{aiomysql} tries to preserve the same API as the\n"
- "@code{aiopg} library."
- msgstr ""
- #: gnu/packages/databases.scm:3050
- msgid "Asynchronous Object Relational Mapper (ORM) for Python"
- msgstr ""
- #: gnu/packages/databases.scm:3051
- msgid ""
- "Tortoise ORM is an easy-to-use asyncio ORM (Object\n"
- "Relational Mapper) inspired by Django. Tortoise ORM was built with relations\n"
- "in mind and admiration for the excellent and popular Django ORM. It's\n"
- "engraved in its design that you are working not with just tables, you work\n"
- "with relational data."
- msgstr ""
- #: gnu/packages/databases.scm:3095
- msgid "Library providing transparent encryption of SQLite database files"
- msgstr ""
- #: gnu/packages/databases.scm:3096
- msgid ""
- "SQLCipher is an implementation of SQLite, extended to\n"
- "provide transparent 256-bit AES encryption of database files. Pages are\n"
- "encrypted before being written to disk and are decrypted when read back. It’s\n"
- "well suited for protecting embedded application databases and for mobile\n"
- "development."
- msgstr ""
- #: gnu/packages/databases.scm:3128
- msgid "Python ODBC Library written in C"
- msgstr ""
- #: gnu/packages/databases.scm:3129
- msgid ""
- "@code{python-pyodbc-c} provides a Python DB-API driver\n"
- "for ODBC, similar to python-pyodbc but written in C.\n"
- "\n"
- "It's designed to stand alone and not have other dependencies on other packages\n"
- "or languages. It uses only Python's built-in data types."
- msgstr ""
- #: gnu/packages/databases.scm:3164
- msgid "Python ODBC Library"
- msgstr ""
- #: gnu/packages/databases.scm:3165
- msgid ""
- "@code{python-pyodbc} provides a Python DB-API driver\n"
- "for ODBC."
- msgstr ""
- #: gnu/packages/databases.scm:3194
- msgid "Read Microsoft Access databases"
- msgstr ""
- #: gnu/packages/databases.scm:3195
- msgid ""
- "MDB Tools is a set of tools and applications to read the\n"
- "proprietary MDB file format used in Microsoft's Access database package. This\n"
- "includes programs to export schema and data from Microsoft's Access database\n"
- "file format to other databases such as MySQL, Oracle, Sybase, PostgreSQL,\n"
- "etc., and an SQL engine for performing simple SQL queries."
- msgstr ""
- #: gnu/packages/databases.scm:3223
- msgid "MongoDB driver for Go"
- msgstr "Go를 위한 MongoDB 드라이버"
- #: gnu/packages/databases.scm:3224
- msgid "This package provides a MongoDB driver for Go."
- msgstr "이 꾸러미는 Go를 위한 MongoDB 드라이버를 제공합니다."
- #: gnu/packages/databases.scm:3263
- msgid "Python binding for the ‘Lightning’ database (LMDB)"
- msgstr ""
- #: gnu/packages/databases.scm:3265
- msgid ""
- "python-lmdb or py-lmdb is a Python binding for the @dfn{Lightning\n"
- "Memory-Mapped Database} (LMDB), a high-performance key-value store."
- msgstr ""
- #: gnu/packages/databases.scm:3358
- msgid "Multi-model database system"
- msgstr ""
- #: gnu/packages/databases.scm:3359
- msgid ""
- "Virtuoso is a scalable cross-platform server that combines\n"
- "relational, graph, and document data management with web application server\n"
- "and web services platform functionality."
- msgstr ""
- #: gnu/packages/databases.scm:3384
- msgid ""
- "Cassandra Cluster Manager for Apache Cassandra clusters on\n"
- "localhost"
- msgstr ""
- #: gnu/packages/databases.scm:3386
- msgid ""
- "Cassandra Cluster Manager is a development tool for testing\n"
- "local Cassandra clusters. It creates, launches and removes Cassandra clusters\n"
- "on localhost."
- msgstr ""
- #: gnu/packages/databases.scm:3420
- msgid "Database abstraction library"
- msgstr ""
- #: gnu/packages/databases.scm:3422
- msgid ""
- "SQLAlchemy is the Python SQL toolkit and Object Relational Mapper that\n"
- "gives application developers the full power and flexibility of SQL. It\n"
- "provides a full suite of well known enterprise-level persistence patterns,\n"
- "designed for efficient and high-performing database access, adapted into a\n"
- "simple and Pythonic domain language."
- msgstr ""
- #: gnu/packages/databases.scm:3444
- msgid "SQLAlchemy stubs and mypy plugin"
- msgstr ""
- #: gnu/packages/databases.scm:3445
- msgid ""
- "This package contains type stubs and a mypy plugin to\n"
- "provide more precise static types and type inference for SQLAlchemy\n"
- "framework."
- msgstr ""
- #: gnu/packages/databases.scm:3474
- msgid "Various utility functions for SQLAlchemy"
- msgstr ""
- #: gnu/packages/databases.scm:3476
- msgid ""
- "SQLAlchemy-utils provides various utility functions and custom data types\n"
- "for SQLAlchemy. SQLAlchemy is an SQL database abstraction library for Python.\n"
- "\n"
- "You might also want to install the following optional dependencies:\n"
- "@enumerate\n"
- "@item @code{python-passlib}\n"
- "@item @code{python-babel}\n"
- "@item @code{python-cryptography}\n"
- "@item @code{python-pytz}\n"
- "@item @code{python-psycopg2}\n"
- "@item @code{python-furl}\n"
- "@item @code{python-flask-babel}\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/databases.scm:3521
- msgid "Mock helpers for SQLAlchemy"
- msgstr ""
- #: gnu/packages/databases.scm:3523
- msgid ""
- "This package provides mock helpers for SQLAlchemy that makes it easy\n"
- "to mock an SQLAlchemy session while preserving the ability to do asserts.\n"
- "\n"
- "Normally Normally SQLAlchemy's expressions cannot be easily compared as\n"
- "comparison on binary expression produces yet another binary expression, but\n"
- "this library provides functions to facilitate such comparisons."
- msgstr ""
- #: gnu/packages/databases.scm:3552
- msgid "Database migration tool for SQLAlchemy"
- msgstr ""
- #: gnu/packages/databases.scm:3554
- msgid ""
- "Alembic is a lightweight database migration tool for usage with the\n"
- "SQLAlchemy Database Toolkit for Python."
- msgstr ""
- #: gnu/packages/databases.scm:3577
- msgid "Tiny key value database with concurrency support"
- msgstr ""
- #: gnu/packages/databases.scm:3579
- msgid ""
- "PickleShare is a small ‘shelve’-like datastore with concurrency support.\n"
- "Like shelve, a PickleShareDB object acts like a normal dictionary. Unlike\n"
- "shelve, many processes can access the database simultaneously. Changing a\n"
- "value in database is immediately visible to other processes accessing the same\n"
- "database. Concurrency is possible because the values are stored in separate\n"
- "files. Hence the “database” is a directory where all files are governed by\n"
- "PickleShare."
- msgstr ""
- #: gnu/packages/databases.scm:3619
- msgid "Another Python SQLite Wrapper"
- msgstr ""
- #: gnu/packages/databases.scm:3621
- msgid ""
- "APSW is a Python wrapper for the SQLite embedded relational database\n"
- "engine. In contrast to other wrappers such as pysqlite it focuses on being a\n"
- "minimal layer over SQLite attempting just to translate the complete SQLite API\n"
- "into Python."
- msgstr ""
- #: gnu/packages/databases.scm:3653
- msgid "Asyncio bridge for sqlite3"
- msgstr ""
- #: gnu/packages/databases.scm:3655
- msgid ""
- "The package aiosqlite replicates the standard sqlite3 module, but with\n"
- "async versions of all the standard connection and cursor methods, and context\n"
- "managers for automatically closing connections."
- msgstr ""
- #: gnu/packages/databases.scm:3679
- msgid "Async database support for Python"
- msgstr "파이썬을 위한 비동기 데이타베이스 지원"
- #: gnu/packages/databases.scm:3680
- msgid "This package implements async database support for Python."
- msgstr "이 꾸러미는 파이썬을 위한 비동기 데이타베이스 지원을 구현합니다."
- #: gnu/packages/databases.scm:3701
- msgid "Python PostgreSQL adapter"
- msgstr ""
- #: gnu/packages/databases.scm:3703
- msgid ""
- "psycopg2 is a thread-safe PostgreSQL adapter that implements DB-API\n"
- "2.0."
- msgstr ""
- #: gnu/packages/databases.scm:3728
- msgid "Connection pooler for psycopg"
- msgstr ""
- #: gnu/packages/databases.scm:3730
- msgid ""
- "This module provides connection pool implementations that can be used\n"
- "with the @code{psycopg} PostgreSQL driver."
- msgstr ""
- #: gnu/packages/databases.scm:3802
- msgid "PostgreSQL driver for Python"
- msgstr ""
- #: gnu/packages/databases.scm:3804
- msgid ""
- "Psycopg 3 is a new implementation of the popular @code{psycopg2}\n"
- "database adapter for Python."
- msgstr ""
- #: gnu/packages/databases.scm:3837
- msgid "SQLAlchemy schema displayer"
- msgstr ""
- #: gnu/packages/databases.scm:3838
- msgid ""
- "This package provides a program to build Entity\n"
- "Relationship diagrams from a SQLAlchemy model (or directly from the\n"
- "database)."
- msgstr ""
- #: gnu/packages/databases.scm:3866
- msgid "Database migrations with SQL"
- msgstr ""
- #: gnu/packages/databases.scm:3868
- msgid ""
- "Yoyo is a database schema migration tool. Migrations are written as SQL\n"
- "files or Python scripts that define a list of migration steps."
- msgstr ""
- #: gnu/packages/databases.scm:3888
- msgid "MySQLdb is an interface to the popular MySQL database server for Python"
- msgstr ""
- #: gnu/packages/databases.scm:3889
- msgid ""
- "MySQLdb is an interface to the popular MySQL database server\n"
- "for Python. The design goals are:\n"
- "@enumerate\n"
- "@item Compliance with Python database API version 2.0 [PEP-0249],\n"
- "@item Thread-safety,\n"
- "@item Thread-friendliness (threads will not block each other).\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/databases.scm:3914
- msgid "Python extension that wraps protocol parsing code in hiredis"
- msgstr ""
- #: gnu/packages/databases.scm:3915
- msgid ""
- "Python-hiredis is a python extension that wraps protocol\n"
- "parsing code in hiredis. It primarily speeds up parsing of multi bulk replies."
- msgstr ""
- #: gnu/packages/databases.scm:3949
- msgid "Redis support for Python's @code{asyncio} module"
- msgstr ""
- #: gnu/packages/databases.scm:3950
- msgid ""
- "This package provides Redis support for the Python\n"
- "@code{asyncio} (PEP 3156) module."
- msgstr ""
- #: gnu/packages/databases.scm:3972
- msgid "Fake implementation of redis API for testing purposes"
- msgstr ""
- #: gnu/packages/databases.scm:3974
- msgid ""
- "Fakeredis is a pure-Python implementation of the redis-py Python client\n"
- "that simulates talking to a redis server. It was created for a single purpose:\n"
- "to write unit tests.\n"
- "\n"
- "Setting up redis is not hard, but one often wants to write unit tests that don't\n"
- "talk to an external server such as redis. This module can be used as a\n"
- "reasonable substitute."
- msgstr ""
- #: gnu/packages/databases.scm:4000
- msgid "Redis Python client"
- msgstr ""
- #: gnu/packages/databases.scm:4002
- msgid "This package provides a Python interface to the Redis key-value store."
- msgstr ""
- #: gnu/packages/databases.scm:4038
- msgid "Simple job queues for Python"
- msgstr ""
- #: gnu/packages/databases.scm:4040
- msgid ""
- "RQ (Redis Queue) is a simple Python library for queueing jobs and\n"
- "processing them in the background with workers. It is backed by Redis and it\n"
- "is designed to have a low barrier to entry."
- msgstr ""
- #: gnu/packages/databases.scm:4075
- msgid "Job scheduling capabilities for RQ (Redis Queue)"
- msgstr ""
- #: gnu/packages/databases.scm:4077
- msgid ""
- "This package provides job scheduling capabilities to @code{python-rq}\n"
- "(Redis Queue)."
- msgstr ""
- #: gnu/packages/databases.scm:4115
- msgid "Non-validating SQL parser"
- msgstr ""
- #: gnu/packages/databases.scm:4116
- msgid ""
- "Sqlparse is a non-validating SQL parser for Python. It\n"
- "provides support for parsing, splitting and formatting SQL statements."
- msgstr ""
- #: gnu/packages/databases.scm:4133
- msgid "Library to write SQL queries in a pythonic way"
- msgstr ""
- #: gnu/packages/databases.scm:4134
- msgid ""
- "@code{python-sql} is a library to write SQL queries, that\n"
- "transforms idiomatic python function calls to well-formed SQL queries."
- msgstr ""
- #: gnu/packages/databases.scm:4155
- msgid "SQL query builder API for Python"
- msgstr ""
- #: gnu/packages/databases.scm:4157
- msgid ""
- "PyPika is a python SQL query builder that exposes the full richness of\n"
- "the SQL language using a syntax that reflects the resulting query."
- msgstr ""
- #: gnu/packages/databases.scm:4282 gnu/packages/databases.scm:4414
- #: gnu/packages/databases.scm:4540
- msgid "Columnar in-memory analytics"
- msgstr ""
- #: gnu/packages/databases.scm:4283 gnu/packages/databases.scm:4415
- #: gnu/packages/databases.scm:4541
- msgid ""
- "Apache Arrow is a columnar in-memory analytics layer\n"
- "designed to accelerate big data. It houses a set of canonical in-memory\n"
- "representations of flat and hierarchical data along with multiple\n"
- "language-bindings for structure manipulation. It also provides IPC and common\n"
- "algorithm implementations."
- msgstr ""
- #: gnu/packages/databases.scm:4582 gnu/packages/databases.scm:4640
- msgid "Python bindings for Apache Arrow"
- msgstr ""
- #: gnu/packages/databases.scm:4584 gnu/packages/databases.scm:4642
- msgid ""
- "This library provides a Pythonic API wrapper for the reference Arrow C++\n"
- "implementation, along with tools for interoperability with pandas, NumPy, and\n"
- "other traditional Python scientific computing packages."
- msgstr ""
- #: gnu/packages/databases.scm:4661
- msgid "CrateDB Python client"
- msgstr ""
- #: gnu/packages/databases.scm:4663
- msgid ""
- "This package provides a Python client library for CrateDB.\n"
- "It implements the Python DB API 2.0 specification and includes support for\n"
- "SQLAlchemy."
- msgstr ""
- #: gnu/packages/databases.scm:4680
- msgid "Database independent abstraction layer in C"
- msgstr ""
- #: gnu/packages/databases.scm:4682
- msgid ""
- "This library implements a database independent abstraction layer in C,\n"
- "similar to the DBI/DBD layer in Perl. Writing one generic set of code,\n"
- "programmers can leverage the power of multiple databases and multiple\n"
- "simultaneous database connections by using this framework."
- msgstr ""
- #: gnu/packages/databases.scm:4746
- msgid "Database drivers for the libdbi framework"
- msgstr ""
- #: gnu/packages/databases.scm:4748
- msgid ""
- "The @code{libdbi-drivers} library provides the database specific drivers\n"
- "for the @code{libdbi} framework.\n"
- "\n"
- "The drivers officially supported by @code{libdbi} are:\n"
- "@itemize\n"
- "@item MySQL,\n"
- "@item PostgreSQL,\n"
- "@item SQLite.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/databases.scm:4788
- msgid "C++ Database Access Library"
- msgstr ""
- #: gnu/packages/databases.scm:4790
- msgid ""
- "SOCI is an abstraction layer for several database backends, including\n"
- "PostreSQL, SQLite, ODBC and MySQL."
- msgstr ""
- #: gnu/packages/databases.scm:4812
- msgid "Client libraries for MS SQL and Sybase servers"
- msgstr ""
- #: gnu/packages/databases.scm:4814
- msgid ""
- "FreeTDS is an implementation of the Tabular DataStream protocol, used for\n"
- "connecting to MS SQL and Sybase servers over TCP/IP."
- msgstr ""
- #: gnu/packages/databases.scm:4834
- msgid "TinyDB is a lightweight document oriented database"
- msgstr ""
- #: gnu/packages/databases.scm:4836
- msgid ""
- "TinyDB is a small document oriented database written in pure Python\n"
- "with no external dependencies. The targets are small apps that would\n"
- "be blown away by a SQL-DB or an external database server."
- msgstr ""
- #: gnu/packages/databases.scm:4883
- msgid "Friendly SQL Client"
- msgstr ""
- #: gnu/packages/databases.scm:4884
- msgid ""
- "Sequeler is a native Linux SQL client built in Vala and\n"
- "Gtk. It allows you to connect to your local and remote databases, write SQL in\n"
- "a handy text editor with language recognition, and visualize SELECT results in\n"
- "a Gtk.Grid Widget."
- msgstr ""
- #: gnu/packages/databases.scm:4928
- msgid "Visual database browser and editor for SQLite"
- msgstr ""
- #: gnu/packages/databases.scm:4929
- msgid ""
- "Sqlitebrowser lets you create, design, and edit database files\n"
- "compatible with SQLite using a graphical user interface."
- msgstr ""
- #: gnu/packages/databases.scm:4963
- msgid "SQL language server written in Go"
- msgstr ""
- #: gnu/packages/databases.scm:4965
- msgid "This package implements the @acronym{LSP, Language Server Protocol} for SQL."
- msgstr ""
- #: gnu/packages/databases.scm:4989
- msgid "Caching front-end based on the Dogpile lock"
- msgstr ""
- #: gnu/packages/databases.scm:4990
- msgid ""
- "@code{dogpile.cache} is a caching API which provides a\n"
- "generic interface to caching backends of any variety, and additionally\n"
- "provides API hooks which integrate these cache backends with the locking\n"
- "mechanism of @code{dogpile}."
- msgstr ""
- #: gnu/packages/debug.scm:117
- msgid "Heuristical file minimizer"
- msgstr ""
- #: gnu/packages/debug.scm:119
- msgid ""
- "Delta assists you in minimizing \"interesting\" files subject to a test\n"
- "of their interestingness. A common such situation is when attempting to\n"
- "isolate a small failure-inducing substring of a large input that causes your\n"
- "program to exhibit a bug."
- msgstr ""
- #: gnu/packages/debug.scm:178 gnu/packages/debug.scm:230
- msgid "Reducer for interesting code"
- msgstr ""
- #: gnu/packages/debug.scm:180
- msgid ""
- "C-Reduce is a tool that takes a large C or C++ program that has a\n"
- "property of interest (such as triggering a compiler bug) and automatically\n"
- "produces a much smaller C/C++ program that has the same property. It is\n"
- "intended for use by people who discover and report bugs in compilers and other\n"
- "tools that process C/C++ code."
- msgstr ""
- #: gnu/packages/debug.scm:232
- msgid ""
- "C-Vise is a Python port of the C-Reduce tool that is fully compatible\n"
- "and uses the same efficient LLVM-based C/C++ @code{clang_delta} reduction\n"
- "tool."
- msgstr ""
- #: gnu/packages/debug.scm:300
- msgid "Security-oriented fuzzer"
- msgstr ""
- #: gnu/packages/debug.scm:302
- msgid ""
- "American fuzzy lop is a security-oriented fuzzer that employs a novel\n"
- "type of compile-time instrumentation and genetic algorithms to automatically\n"
- "discover clean, interesting test cases that trigger new internal states in the\n"
- "targeted binary. This substantially improves the functional coverage for the\n"
- "fuzzed code. The compact synthesized corpora produced by the tool are also\n"
- "useful for seeding other, more labor- or resource-intensive testing regimes\n"
- "down the road."
- msgstr ""
- #: gnu/packages/debug.scm:444
- msgid "Machine emulator and virtualizer (without GUI) for american fuzzy lop"
- msgstr ""
- #: gnu/packages/debug.scm:446
- msgid ""
- "QEMU is a generic machine emulator and virtualizer. This package\n"
- "of QEMU is used only by the american fuzzy lop package.\n"
- "\n"
- "When used as a machine emulator, QEMU can run OSes and programs made for one\n"
- "machine (e.g. an ARM board) on a different machine---e.g., your own PC. By\n"
- "using dynamic translation, it achieves very good performance.\n"
- "\n"
- "When used as a virtualizer, QEMU achieves near native performances by\n"
- "executing the guest code directly on the host CPU. QEMU supports\n"
- "virtualization when executing under the Xen hypervisor or using\n"
- "the KVM kernel module in Linux. When using KVM, QEMU can virtualize x86,\n"
- "server and embedded PowerPC, and S390 guests."
- msgstr ""
- #: gnu/packages/debug.scm:512
- msgid "Expose race conditions in Makefiles"
- msgstr ""
- #: gnu/packages/debug.scm:514
- msgid ""
- "Stress Make is a customized GNU Make that explicitly manages the order\n"
- "in which concurrent jobs are run to provoke erroneous behavior into becoming\n"
- "manifest. It can run jobs in the order in which they're launched, in backwards\n"
- "order, or in random order. The thought is that if code builds correctly with\n"
- "Stress Make, then it is likely that the @code{Makefile} contains no race\n"
- "conditions."
- msgstr ""
- #: gnu/packages/debug.scm:541
- msgid "Transparent application input fuzzer"
- msgstr ""
- #: gnu/packages/debug.scm:542
- msgid ""
- "Zzuf is a transparent application input fuzzer. It works by\n"
- "intercepting file operations and changing random bits in the program's\n"
- "input. Zzuf's behaviour is deterministic, making it easy to reproduce bugs."
- msgstr ""
- #: gnu/packages/debug.scm:593
- msgid "Memory scanner"
- msgstr ""
- #: gnu/packages/debug.scm:594
- msgid ""
- "Scanmem is a debugging utility designed to isolate the\n"
- "address of an arbitrary variable in an executing process. Scanmem simply\n"
- "needs to be told the pid of the process and the value of the variable at\n"
- "several different times. After several scans of the process, scanmem isolates\n"
- "the position of the variable and allows you to modify its value."
- msgstr ""
- #: gnu/packages/debug.scm:624
- msgid ""
- "Remake is an enhanced version of GNU Make that adds improved\n"
- "error reporting, better tracing, profiling, and a debugger."
- msgstr ""
- #: gnu/packages/debug.scm:680
- msgid "Record and reply debugging framework"
- msgstr ""
- #: gnu/packages/debug.scm:682
- msgid ""
- "rr is a lightweight tool for recording, replaying and debugging\n"
- "execution of applications (trees of processes and threads). Debugging extends\n"
- "GDB with very efficient reverse-execution, which in combination with standard\n"
- "GDB/x86 features like hardware data watchpoints, makes debugging much more\n"
- "fun."
- msgstr ""
- #: gnu/packages/debug.scm:709
- msgid "C library for producing symbolic backtraces"
- msgstr ""
- #: gnu/packages/debug.scm:710
- msgid ""
- "The @code{libbacktrace} library can be linked into a C/C++\n"
- "program to produce symbolic backtraces."
- msgstr ""
- #: gnu/packages/debug.scm:749
- msgid "Memory leaks detection tool"
- msgstr ""
- #: gnu/packages/debug.scm:750
- msgid ""
- "The libleak tool detects memory leaks by hooking memory\n"
- "functions such as @code{malloc}. It comes as a shared object to be pre-loaded\n"
- "via @code{LD_PRELOAD} when launching the application. It prints the full call\n"
- "stack at suspicious memory leak points. Modifying or recompiling the target\n"
- "program is not required, and the detection can be enabled or disabled while\n"
- "the target application is running. The overhead incurred by libleak is\n"
- "smaller than that of other tools such as Valgrind, and it aims to be easier to\n"
- "use than similar tools like @command{mtrace}."
- msgstr ""
- #: gnu/packages/debug.scm:792
- msgid "Console front-end to the GNU debugger"
- msgstr "GNU 디버거에 대한 콘솔 프론트-엔드"
- #: gnu/packages/debug.scm:794
- msgid ""
- "@code{cgdb} is a lightweight curses (terminal-based) interface to the\n"
- "GNU Debugger (GDB). In addition to the standard gdb console, cgdb provides\n"
- "a split screen view that displays the source code as it executes. The\n"
- "keyboard interface is modeled after vim, so vim users should feel at home\n"
- "using cgdb."
- msgstr ""
- #: gnu/packages/debug.scm:828
- msgid "Debugging tool for MSP430 MCUs"
- msgstr ""
- #: gnu/packages/debug.scm:829
- msgid ""
- "MspDebug supports FET430UIF, eZ430, RF2500 and Olimex\n"
- "MSP430-JTAG-TINY programmers, as well as many other compatible\n"
- "devices. It can be used as a proxy for gdb or as an independent\n"
- "debugger with support for programming, disassembly and reverse\n"
- "engineering."
- msgstr ""
- #: gnu/packages/debug.scm:860
- msgid "GUI frontend for GDB"
- msgstr ""
- #: gnu/packages/debug.scm:861
- msgid "This package provides a frontend to GDB, the GNU debugger."
- msgstr "이와 같은 꾸러미는 GNU 디버거 GDB에 대한 프론트엔드를 제공합니다."
- #: gnu/packages/debug.scm:886
- #, fuzzy
- #| msgid "Console front-end to the GNU debugger"
- msgid "Graphical front-end for GDB and other debuggers"
- msgstr "GNU 디버거에 대한 콘솔 프론트-엔드"
- #: gnu/packages/debug.scm:887
- msgid ""
- "GNU DDD, the Data Display Debugger, is a graphical front-end\n"
- "for command-line debuggers. Many back-end debuggers are supported, notably\n"
- "the GNU debugger, GDB. In addition to usual debugging features such as\n"
- "viewing the source files, DDD has additional graphical, interactive features\n"
- "to aid in debugging."
- msgstr ""
- #: gnu/packages/debug.scm:918
- msgid "Debugger for the Go programming language"
- msgstr ""
- #: gnu/packages/debug.scm:919
- msgid "Delve is a debugger for the Go programming language."
- msgstr ""
- #: gnu/packages/dejagnu.scm:78
- msgid "GNU software testing framework"
- msgstr ""
- #: gnu/packages/dejagnu.scm:80
- msgid ""
- "DejaGnu is a framework for testing software. In effect, it serves as\n"
- "a front-end for all tests written for a program. Thus, each program can have\n"
- "multiple test suites, which are then all managed by a single harness."
- msgstr ""
- #: gnu/packages/games.scm:291
- msgid "Scrolling, platform-jumping, ancient pyramid exploring game"
- msgstr ""
- #: gnu/packages/games.scm:293
- msgid ""
- "Abe's Amazing Adventure is a scrolling,\n"
- "platform-jumping, key-collecting, ancient pyramid exploring game, vaguely in\n"
- "the style of similar games for the Commodore+4."
- msgstr ""
- #: gnu/packages/games.scm:361
- msgid "Action game in four spatial dimensions"
- msgstr ""
- #: gnu/packages/games.scm:363
- msgid ""
- "Adanaxis is a fast-moving first person shooter set in deep space, where\n"
- "the fundamentals of space itself are changed. By adding another dimension to\n"
- "space this game provides an environment with movement in four directions and\n"
- "six planes of rotation. Initially the game explains the 4D control system via\n"
- "a graphical sequence, before moving on to 30 levels of gameplay with numerous\n"
- "enemy, ally, weapon and mission types. Features include simulated 4D texturing,\n"
- "mouse and joystick control, and original music."
- msgstr ""
- #: gnu/packages/games.scm:405
- msgid "Retro platform game"
- msgstr ""
- #: gnu/packages/games.scm:407
- msgid ""
- "Guide Alex the Allegator through the jungle in order to save his\n"
- "girlfriend Lola from evil humans who want to make a pair of shoes out of her.\n"
- "Plenty of classic platforming in four nice colors guaranteed!\n"
- "\n"
- "The game includes a built-in editor so you can design and share your own maps."
- msgstr ""
- #: gnu/packages/games.scm:436
- msgid "Tron clone in 3D"
- msgstr ""
- #: gnu/packages/games.scm:437
- msgid ""
- "Armagetron Advanced is a multiplayer game in 3d that\n"
- "attempts to emulate and expand on the lightcycle sequence from the movie Tron.\n"
- "It's an old school arcade game slung into the 21st century. Highlights\n"
- "include a customizable playing arena, HUD, unique graphics, and AI bots. For\n"
- "the more advanced player there are new game modes and a wide variety of\n"
- "physics settings to tweak as well."
- msgstr ""
- #: gnu/packages/games.scm:490
- msgid "3D space shooter with spaceship upgrade possibilities"
- msgstr ""
- #: gnu/packages/games.scm:492
- msgid ""
- "Space is a vast area, an unbounded territory where it seems there is\n"
- "a room for everybody, but reversal of fortune put things differently. The\n"
- "hordes of hostile creatures crawled out from the dark corners of the universe,\n"
- "craving to conquer your homeland. Their force is compelling, their legions\n"
- "are interminable. However, humans didn't give up without a final showdown and\n"
- "put their best pilot to fight back. These malicious invaders chose the wrong\n"
- "galaxy to conquer and you are to prove it! Go ahead and make alien aggressors\n"
- "regret their insolence."
- msgstr ""
- #: gnu/packages/games.scm:548
- msgid "3D first-person roguelike game"
- msgstr ""
- #: gnu/packages/games.scm:550
- msgid ""
- "Barony is a first-person roguelike role-playing game with cooperative\n"
- "play. The player must descend a dark dungeon and destroy an undead lich while\n"
- "avoiding traps and fighting monsters. The game features randomly generated\n"
- "dungeons, 13 character classes, hundreds of items and artifacts, and\n"
- "cooperative multiplayer for up to four players. This package does @emph{not}\n"
- "provide the game assets."
- msgstr ""
- #: gnu/packages/games.scm:611
- msgid "Antagonistic Tetris-style falling brick game for text terminals"
- msgstr ""
- #: gnu/packages/games.scm:613
- msgid ""
- "Bastet (short for Bastard Tetris) is a simple ncurses-based falling brick\n"
- "game. Unlike normal Tetris, Bastet does not choose the next brick at random.\n"
- "Instead, it uses a special algorithm to choose the worst brick possible.\n"
- "\n"
- "Playing bastet can be a painful experience, especially if you usually make\n"
- "canyons and wait for the long I-shaped block to clear four rows at a time."
- msgstr ""
- #: gnu/packages/games.scm:657
- msgid "Terminal-based multiplayer Tetris clone"
- msgstr ""
- #: gnu/packages/games.scm:658
- msgid ""
- "Tetrinet is a multiplayer Tetris-like game with powerups and\n"
- "attacks you can use on opponents."
- msgstr ""
- #: gnu/packages/games.scm:691
- msgid "Terminal-based Tetris clone"
- msgstr ""
- #: gnu/packages/games.scm:692
- msgid ""
- "Vitetris is a classic multiplayer Tetris clone for the\n"
- "terminal."
- msgstr ""
- #: gnu/packages/games.scm:734
- msgid "Platform action game featuring a blob with a lot of weapons"
- msgstr ""
- #: gnu/packages/games.scm:735
- msgid ""
- "Blobwars: Metal Blob Solid is a 2D platform game, the first\n"
- "in the Blobwars series. You take on the role of a fearless Blob agent. Your\n"
- "mission is to infiltrate various enemy bases and rescue as many MIAs as\n"
- "possible, while battling many vicious aliens."
- msgstr ""
- #: gnu/packages/games.scm:826
- msgid "Collection of the old text-based games and amusements"
- msgstr ""
- #: gnu/packages/games.scm:828
- msgid ""
- "These are the BSD games.\n"
- "\n"
- "Action: atc (keep the airplanes safe), hack (explore the dangerous Dungeon),\n"
- "hunt (kill the others for the Pair of Boots, multi-player only), robots (avoid\n"
- "the evil robots), sail (game of naval warfare with wooden ships), snake (steal\n"
- "the $$ from the cave, anger the snake, and get out alive), tetris (game of\n"
- "lining up the falling bricks of different shapes), and worm (eat, grow big,\n"
- "and neither bite your tail, nor ram the wall).\n"
- "\n"
- "Amusements: banner (prints a large banner), bcd & morse & ppt (print a punch\n"
- "card, or paper tape, or Morse codes), caesar & rot13 (ciphers and deciphers\n"
- "the input), factor (factorizes a number), number (translates numbers into\n"
- "text), pig (translates from English to Pig Latin), pom (should print the\n"
- "Moon's phase), primes (generates primes), rain & worms (plays an screen-saver\n"
- "in terminal), random (prints randomly chosen lines from files, or returns a\n"
- "random exit-code), and wtf (explains what do some acronyms mean).\n"
- "\n"
- "Board: backgammon (lead the men out of board faster than the friend do),\n"
- "boggle (find the words in the square of letters), dab (game of dots and\n"
- "boxes), gomoku (game of five in a row), hangman (guess a word before man is\n"
- "hanged), and monop (game of monopoly, hot-seat only). Also the card-games:\n"
- "canfield, cribbage, fish (juniors game), and mille.\n"
- "\n"
- "Quests: adventure (search for treasures with the help of wizard),\n"
- "battlestar (explore the world around, starting from dying spaceship),\n"
- "phantasia (role-play as an rogue), trek (hunt the Klingons, and save the\n"
- "Federation), and wump (hunt the big smelly Wumpus in a dark cave).\n"
- "\n"
- "Quizzes: arithmetic and quiz."
- msgstr ""
- #: gnu/packages/games.scm:921
- msgid "3D first person tank battle game"
- msgstr ""
- #: gnu/packages/games.scm:923
- msgid ""
- "BZFlag is a 3D multi-player multiplatform tank battle game that\n"
- "allows users to play against each other in a network environment.\n"
- "There are five teams: red, green, blue, purple and rogue (rogue tanks\n"
- "are black). Destroying a player on another team scores a win, while\n"
- "being destroyed or destroying a teammate scores a loss. Rogues have\n"
- "no teammates (not even other rogues), so they cannot shoot teammates\n"
- "and they do not have a team score.\n"
- "\n"
- "There are two main styles of play: capture-the-flag and free-for-all.\n"
- "In capture-the-flag, each team (except rogues) has a team base and\n"
- "each team with at least one player has a team flag. The object is to\n"
- "capture an enemy team's flag by bringing it to your team's base. This\n"
- "destroys every player on the captured team, subtracts one from that\n"
- "team's score, and adds one to your team's score. In free-for-all,\n"
- "there are no team flags or team bases. The object is simply to get as\n"
- "high a score as possible."
- msgstr ""
- #: gnu/packages/games.scm:1004
- msgid "Survival horror roguelike video game"
- msgstr ""
- #: gnu/packages/games.scm:1006
- msgid ""
- "Cataclysm: Dark Days Ahead (or \"DDA\" for short) is a roguelike set\n"
- "in a post-apocalyptic world. Struggle to survive in a harsh, persistent,\n"
- "procedurally generated world. Scavenge the remnants of a dead civilization\n"
- "for food, equipment, or, if you are lucky, a vehicle with a full tank of gas\n"
- "to get you out of Dodge. Fight to defeat or escape from a wide variety of\n"
- "powerful monstrosities, from zombies to giant insects to killer robots and\n"
- "things far stranger and deadlier, and against the others like yourself, that\n"
- "want what you have."
- msgstr ""
- #: gnu/packages/games.scm:1054
- msgid "Tabletop card game simulator"
- msgstr ""
- #: gnu/packages/games.scm:1055
- msgid ""
- "Cockatrice is a program for playing tabletop card games\n"
- "over a network. Its server design prevents users from manipulating the game\n"
- "for unfair advantage. The client also provides a single-player mode, which\n"
- "allows users to brew while offline."
- msgstr ""
- #: gnu/packages/games.scm:1107
- msgid "Implementation of the @i{Theme Hospital} game engine"
- msgstr ""
- #: gnu/packages/games.scm:1109
- msgid ""
- "This package provides a reimplementation of the 1997 Bullfrog business\n"
- "simulation game @i{Theme Hospital}. As well as faithfully recreating the\n"
- "original engine, CorsixTH adds support for high resolutions, custom levels and\n"
- "more. This package does @emph{not} provide the game assets."
- msgstr ""
- #: gnu/packages/games.scm:1150
- msgid "Speaking cow text filter"
- msgstr ""
- #: gnu/packages/games.scm:1151
- msgid ""
- "Cowsay is basically a text filter. Send some text into it,\n"
- "and you get a cow saying your text. If you think a talking cow isn't enough,\n"
- "cows can think too: all you have to do is run @command{cowthink}. If you're\n"
- "tired of cows, a variety of other ASCII-art messengers are available."
- msgstr ""
- #: gnu/packages/games.scm:1180
- msgid "Fallout 2 game engine"
- msgstr ""
- #: gnu/packages/games.scm:1181
- #, scheme-format
- msgid ""
- "This package provides the Fallout 2 game engine. Game data\n"
- "should be placed in @file{~/.local/share/falltergeist}."
- msgstr ""
- #: gnu/packages/games.scm:1291
- msgid "3D billiard game"
- msgstr ""
- #: gnu/packages/games.scm:1292
- msgid ""
- "FooBillard++ is an advanced 3D OpenGL billiard game\n"
- "based on the original foobillard 3.0a sources from Florian Berger.\n"
- "You can play it with one or two players or against the computer.\n"
- "\n"
- "The game features:\n"
- "\n"
- "@itemize\n"
- "@item Wood paneled table with gold covers and gold diamonds.\n"
- "@item Reflections on balls.\n"
- "@item Zoom in and out, rotation, different angles and bird's eye view.\n"
- "@item Different game modes: 8 or 9-ball, Snooker or Carambole.\n"
- "@item Tournaments. Compete against other players.\n"
- "@item Animated cue with strength and eccentric hit adjustment.\n"
- "@item Jump shots and snipping.\n"
- "@item Realistic gameplay and billiard sounds.\n"
- "@item Red-Green stereo.\n"
- "@item And much more.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/games.scm:1350
- msgid "Free content game based on the Doom engine"
- msgstr ""
- #: gnu/packages/games.scm:1359
- msgid ""
- "The Freedoom project aims to create a complete free content first person\n"
- "shooter game. Freedoom by itself is just the raw material for a game: it must\n"
- "be paired with a compatible game engine (such as @code{prboom-plus}) to be\n"
- "played. Freedoom complements the Doom engine with free levels, artwork, sound\n"
- "effects and music to make a completely free game."
- msgstr ""
- #: gnu/packages/games.scm:1412
- msgid "Isometric role-playing game against killer robots"
- msgstr ""
- #: gnu/packages/games.scm:1414
- msgid ""
- "Freedroid RPG is an @dfn{RPG} (Role-Playing Game) with isometric graphics.\n"
- "The game tells the story of a world destroyed by a conflict between robots and\n"
- "their human masters. To restore peace to humankind, the player must complete\n"
- "numerous quests while fighting off rebelling robots---either by taking control\n"
- "of them, or by simply blasting them to pieces with melee and ranged weapons in\n"
- "real-time combat."
- msgstr ""
- #: gnu/packages/games.scm:1477
- msgid "Software for exploring cellular automata"
- msgstr ""
- #: gnu/packages/games.scm:1479
- msgid ""
- "Golly simulates Conway's Game of Life and many other types of cellular\n"
- "automata. The following features are available:\n"
- "@enumerate\n"
- "@item Support for bounded and unbounded universes, with cells of up to 256\n"
- " states.\n"
- "@item Support for multiple algorithms, including Bill Gosper's Hashlife\n"
- " algorithm.\n"
- "@item Loading patterns from BMP, PNG, GIF and TIFF image files.\n"
- "@item Reading RLE, macrocell, Life 1.05/1.06, dblife and MCell files.\n"
- "@item Scriptable via Lua or Python.\n"
- "@item Extracting patterns, rules and scripts from zip files.\n"
- "@item Downloading patterns, rules and scripts from online archives.\n"
- "@item Pasting patterns from the clipboard.\n"
- "@item Unlimited undo/redo.\n"
- "@item Configurable keyboard shortcuts.\n"
- "@item Auto fit option to keep patterns within the view.\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/games.scm:1534
- msgid "Joy-Con controller daemon"
- msgstr ""
- #: gnu/packages/games.scm:1535
- msgid ""
- "This package provides a userspace daemon for the Nintendo\n"
- "Joy-Con controllers."
- msgstr ""
- "이 꾸러미는 닌텐도를 위한 사용자 공간을 제공합니다\n"
- "Joy-Con 제어기."
- #: gnu/packages/games.scm:1563
- msgid "Re-implementation of Caesar III game engine"
- msgstr ""
- #: gnu/packages/games.scm:1565
- msgid ""
- "Engine for Caesar III, a city-building real-time strategy game.\n"
- "Julius includes some UI enhancements while preserving the logic (including\n"
- "bugs) of the original game, so that saved games are compatible. This package\n"
- "does not include game data."
- msgstr ""
- #: gnu/packages/games.scm:1599
- msgid "Re-implementation of Caesar III game engine with gameplay changes"
- msgstr ""
- #: gnu/packages/games.scm:1601
- msgid ""
- "Fork of Julius, an engine for the a city-building real-time strategy\n"
- "game Caesar III. Gameplay enhancements include:\n"
- "\n"
- "@itemize\n"
- "@item roadblocks;\n"
- "@item market special orders;\n"
- "@item global labour pool;\n"
- "@item partial warehouse storage;\n"
- "@item increased game limits;\n"
- "@item zoom controls.\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/games.scm:1639
- msgid "Puzzle/platform game"
- msgstr ""
- #: gnu/packages/games.scm:1640
- msgid ""
- "Me and My Shadow is a puzzle/platform game in which you try\n"
- "to reach the exit by solving puzzles. Spikes, moving blocks, fragile blocks\n"
- "and much more stand between you and the exit. Record your moves and let your\n"
- "shadow mimic them to reach blocks you couldn't reach alone."
- msgstr ""
- #: gnu/packages/games.scm:1692
- msgid "2D retro side-scrolling game"
- msgstr ""
- #: gnu/packages/games.scm:1693
- msgid ""
- "@code{Open Surge} is a 2D retro side-scrolling platformer\n"
- "inspired by the Sonic games. The player runs at high speeds through each\n"
- "level while collecting items and avoiding obstacles. The game includes a\n"
- "built-in level editor."
- msgstr ""
- #: gnu/packages/games.scm:1738
- msgid "Multiplayer dungeon game involving knights and quests"
- msgstr ""
- #: gnu/packages/games.scm:1739
- msgid ""
- "Knights is a multiplayer game involving several knights who\n"
- "must run around a dungeon and complete various quests. Each game revolves\n"
- "around a quest – for example, you might have to find some items and carry them\n"
- "back to your starting point. This may sound easy, but as there are only\n"
- "enough items in the dungeon for one player to win, you may end up having to\n"
- "kill your opponents to get their stuff! Other quests involve escaping from\n"
- "the dungeon, fighting a duel to the death against the enemy knights, or\n"
- "destroying an ancient book using a special wand."
- msgstr ""
- #: gnu/packages/games.scm:1788
- msgid "Move the tiles until you obtain the 2048 tile"
- msgstr ""
- #: gnu/packages/games.scm:1789
- msgid ""
- "GNOME 2048 provides a 2D grid for playing 2048, a\n"
- "single-player sliding tile puzzle game. The objective of the game is to merge\n"
- "together adjacent tiles of the same number until the sum of 2048 is achieved\n"
- "in one tile."
- msgstr ""
- #: gnu/packages/games.scm:1827
- msgid "Chess board for GNOME"
- msgstr ""
- #: gnu/packages/games.scm:1828
- msgid ""
- "GNOME Chess provides a 2D board for playing chess games\n"
- "against human or computer players. It supports loading and saving games in\n"
- "Portable Game Notation. To play against a computer, install a chess engine\n"
- "such as chess or stockfish."
- msgstr ""
- #: gnu/packages/games.scm:1888
- msgid "Backgammon game"
- msgstr ""
- #: gnu/packages/games.scm:1889
- msgid ""
- "The GNU backgammon application (also known as \"gnubg\") can\n"
- "be used for playing, analyzing and teaching the game. It has an advanced\n"
- "evaluation engine based on artificial neural networks suitable for both\n"
- "beginners and advanced players. In addition to a command-line interface, it\n"
- "also features an attractive, 3D representation of the playing board."
- msgstr ""
- #: gnu/packages/games.scm:1928
- msgid "3d Rubik's cube game"
- msgstr ""
- #: gnu/packages/games.scm:1930
- msgid ""
- "GNUbik is a puzzle game in which you must manipulate a cube to make\n"
- "each of its faces have a uniform color. The game is customizable, allowing\n"
- "you to set the size of the cube (the default is 3x3) or to change the colors.\n"
- "You may even apply photos to the faces instead of colors. The game is\n"
- "scriptable with Guile."
- msgstr ""
- #: gnu/packages/games.scm:1952
- msgid "The game of Shogi (Japanese chess)"
- msgstr ""
- #: gnu/packages/games.scm:1953
- msgid ""
- "GNU Shogi is a program that plays the game Shogi (Japanese\n"
- "Chess). It is similar to standard chess but this variant is far more complicated."
- msgstr ""
- #: gnu/packages/games.scm:1981
- msgid "Tetris clone based on the SDL library"
- msgstr ""
- #: gnu/packages/games.scm:1983
- msgid ""
- "LTris is a tetris clone: differently shaped blocks are falling down the\n"
- "rectangular playing field and can be moved sideways or rotated by 90 degree\n"
- "units with the aim of building lines without gaps which then disappear (causing\n"
- "any block above the deleted line to fall down). LTris has three game modes: In\n"
- "Classic you play until the stack of blocks reaches the top of the playing field\n"
- "and no new blocks can enter. In Figures the playing field is reset to a new\n"
- "figure each level and later on tiles and lines suddenly appear. In Multiplayer\n"
- "up to three players (either human or CPU) compete with each other sending\n"
- "removed lines to all opponents. There is also a Demo mode in which you can\n"
- "watch your CPU playing while enjoying a cup of tea!"
- msgstr ""
- #: gnu/packages/games.scm:2105
- msgid "Classic dungeon crawl game"
- msgstr ""
- #: gnu/packages/games.scm:2106
- msgid ""
- "NetHack is a single player dungeon exploration game that runs\n"
- "on a wide variety of computer systems, with a variety of graphical and text\n"
- "interfaces all using the same game engine. Unlike many other Dungeons &\n"
- "Dragons-inspired games, the emphasis in NetHack is on discovering the detail of\n"
- "the dungeon and not simply killing everything in sight - in fact, killing\n"
- "everything in sight is a good way to die quickly. Each game presents a\n"
- "different landscape - the random number generator provides an essentially\n"
- "unlimited number of variations of the dungeon and its denizens to be discovered\n"
- "by the player in one of a number of characters: you can pick your race, your\n"
- "role, and your gender."
- msgstr ""
- #: gnu/packages/games.scm:2148
- msgid "Logical tile puzzle"
- msgstr ""
- #: gnu/packages/games.scm:2150
- msgid ""
- "PipeWalker is a simple puzzle game with many diffent themes: connect all\n"
- "computers to one network server, bring water from a source to the taps, etc.\n"
- "The underlying mechanism is always the same: you must turn each tile in the\n"
- "grid in the right direction to combine all components into a single circuit.\n"
- "Every puzzle has a complete solution, although there may be more than one."
- msgstr ""
- #: gnu/packages/games.scm:2197
- msgid "Version of the classic 3D shoot'em'up game Doom"
- msgstr ""
- #: gnu/packages/games.scm:2199
- msgid "PrBoom+ is a Doom source port developed from the original PrBoom project."
- msgstr ""
- #: gnu/packages/games.scm:2246
- msgid "Action platformer game"
- msgstr ""
- #: gnu/packages/games.scm:2248
- msgid ""
- "ReTux is an action platformer loosely inspired by the Mario games,\n"
- "utilizing the art assets from the @code{SuperTux} project."
- msgstr ""
- #: gnu/packages/games.scm:2283
- msgid "Thematic meditative game"
- msgstr ""
- #: gnu/packages/games.scm:2285
- msgid ""
- "You are a robot moving around in a realm filled with ASCII characters.\n"
- "Examine humorously described though useless items as you search for a kitten\n"
- "among them. The theme of this Zen simulation is continued in its\n"
- "documentation."
- msgstr ""
- #: gnu/packages/games.scm:2388
- msgid "Classical roguelike/sandbox game"
- msgstr ""
- #: gnu/packages/games.scm:2390
- msgid ""
- "RogueBox Adventures is a graphical roguelike with strong influences\n"
- "from sandbox games like Minecraft or Terraria. The main idea of RogueBox\n"
- "Adventures is to offer the player a kind of roguelike toy-world. This world\n"
- "can be explored and changed freely."
- msgstr ""
- #: gnu/packages/games.scm:2498
- msgid "Help Barbie the seahorse float on bubbles to the moon"
- msgstr ""
- #: gnu/packages/games.scm:2500
- msgid ""
- "Barbie Seahorse Adventures is a retro style platform arcade game.\n"
- "You are Barbie the seahorse who travels through the jungle, up to the\n"
- "volcano until you float on bubbles to the moon. On the way to your\n"
- "final destination you will encounter various enemies, servants of the\n"
- "evil overlord who has stolen the galaxy crystal. Avoid getting hit\n"
- "and defeat them with your bubbles!"
- msgstr ""
- #: gnu/packages/games.scm:2558
- msgid "Lightweight game engine for Action-RPGs"
- msgstr ""
- #: gnu/packages/games.scm:2560
- msgid ""
- "Solarus is a 2D game engine written in C++, that can run games\n"
- "scripted in Lua. It has been designed with 16-bit classic Action-RPGs\n"
- "in mind."
- msgstr ""
- #: gnu/packages/games.scm:2587
- msgid "Create and modify quests for the Solarus engine"
- msgstr ""
- #: gnu/packages/games.scm:2589
- msgid ""
- "Solarus Quest Editor is a graphical user interface to create and\n"
- "modify quests for the Solarus engine."
- msgstr ""
- #: gnu/packages/games.scm:2664
- msgid "Fast-paced local multiplayer arcade game"
- msgstr ""
- #: gnu/packages/games.scm:2665
- msgid ""
- "In SuperStarfighter, up to four local players compete in a\n"
- "2D arena with fast-moving ships and missiles. Different game types are\n"
- "available, as well as a single-player mode with AI-controlled ships."
- msgstr ""
- #: gnu/packages/games.scm:2693
- msgid "Jigsaw puzzle game that uses tetrominoes for the pieces"
- msgstr ""
- #: gnu/packages/games.scm:2695
- msgid ""
- "Tetzle is a jigsaw puzzle game that uses tetrominoes for the pieces. Any image\n"
- "can be imported and used to create puzzles with a wide range of sizes. Games are\n"
- "saved automatically, and you can select between currently in progress games."
- msgstr ""
- #: gnu/packages/games.scm:2826
- msgid "Fast-paced single-player racing game"
- msgstr ""
- #: gnu/packages/games.scm:2827
- msgid ""
- "Trigger-rally is a 3D rally simulation with great physics\n"
- "for drifting on over 200 maps. Different terrain materials like dirt,\n"
- "asphalt, sand, ice, etc. and various weather, light, and fog conditions give\n"
- "this rally simulation the edge over many other games. You need to make it\n"
- "through the maps in often tight time limits and can further improve by beating\n"
- "the recorded high scores. All attached single races must be finished in time\n"
- "in order to win an event, unlocking additional events and cars. Most maps are\n"
- "equipped with spoken co-driver notes and co-driver icons."
- msgstr ""
- #: gnu/packages/games.scm:2881
- msgid "UFO: AI map generator"
- msgstr ""
- #: gnu/packages/games.scm:2883
- msgid ""
- "This package provides @command{ufo2map}, a program used to generate\n"
- "maps for the UFO: Alien Invasion strategy game."
- msgstr ""
- #: gnu/packages/games.scm:2923
- msgid "UFO: AI data files"
- msgstr ""
- #: gnu/packages/games.scm:2925
- msgid "This package contains maps and other assets for UFO: Alien Invasion."
- msgstr ""
- #: gnu/packages/games.scm:3010
- msgid "Turn-based tactical strategy game"
- msgstr ""
- #: gnu/packages/games.scm:3012
- msgid ""
- "UFO: Alien Invasion is a tactical strategy game set in the year 2084.\n"
- "You control a secret organisation charged with defending Earth from a brutal\n"
- "alien enemy. Build up your bases, prepare your team, and dive head-first into\n"
- "the fast and flowing turn-based combat.\n"
- "\n"
- "Over the long term you will need to conduct research into the alien threat to\n"
- "figure out their mysterious goals and use their powerful weapons for your own\n"
- "ends. You will produce unique items and use them in combat against your\n"
- "enemies.\n"
- "\n"
- "You can also use them against your friends with the multiplayer functionality.\n"
- "\n"
- "Warning: This is a pre-release version of UFO: AI! Some things may not work\n"
- "properly."
- msgstr ""
- #: gnu/packages/games.scm:3048
- msgid "User interface for gnushogi"
- msgstr "gnushogi를 위한 사용자 연결장치"
- #: gnu/packages/games.scm:3049
- msgid "A graphical user interface for the package @code{gnushogi}."
- msgstr "꾸러미 @code{gnushogi}을 위한 그래픽 사용자 연결장치."
- #: gnu/packages/games.scm:3101
- msgid "GNU/Linux port of the indie game \"l'Abbaye des Morts\""
- msgstr ""
- #: gnu/packages/games.scm:3102
- msgid ""
- "L'Abbaye des Morts is a 2D platform game set in 13th century\n"
- "France. The Cathars, who preach about good Christian beliefs, were being\n"
- "expelled by the Catholic Church out of the Languedoc region in France. One of\n"
- "them, called Jean Raymond, found an old church in which to hide, not knowing\n"
- "that beneath its ruins lay buried an ancient evil."
- msgstr ""
- #: gnu/packages/games.scm:3145
- msgid "Dungeon exploration roguelike"
- msgstr ""
- #: gnu/packages/games.scm:3146
- msgid ""
- "Angband is a Classic dungeon exploration roguelike. Explore\n"
- "the depths below Angband, seeking riches, fighting monsters, and preparing to\n"
- "fight Morgoth, the Lord of Darkness."
- msgstr ""
- #: gnu/packages/games.scm:3192
- msgid "Lemmings clone"
- msgstr ""
- #: gnu/packages/games.scm:3194
- msgid ""
- "Pingus is a free Lemmings-like puzzle game in which the player takes\n"
- "command of a bunch of small animals and has to guide them through levels.\n"
- "Since the animals walk on their own, the player can only influence them by\n"
- "giving them commands, like build a bridge, dig a hole, or redirect all animals\n"
- "in the other direction. Multiple such commands are necessary to reach the\n"
- "level's exit. The game is presented in a 2D side view."
- msgstr ""
- #: gnu/packages/games.scm:3216
- msgid "Convert English text to humorous dialects"
- msgstr ""
- #: gnu/packages/games.scm:3217
- msgid ""
- "The GNU Talk Filters are programs that convert English text\n"
- "into stereotyped or otherwise humorous dialects. The filters are provided as\n"
- "a C library, so they can easily be integrated into other programs."
- msgstr ""
- #: gnu/packages/games.scm:3259
- msgid "Shoot'em up fangame and libre clone of Touhou Project"
- msgstr ""
- #: gnu/packages/games.scm:3261
- msgid ""
- "The player controls a character (one of three: Good, Bad, and Dead),\n"
- "dodges the missiles (lots of it cover the screen, but the character's hitbox\n"
- "is very small), and shoot at the adversaries that keep appear on the screen."
- msgstr ""
- #: gnu/packages/games.scm:3303
- msgid "Simulate the display from \"The Matrix\""
- msgstr ""
- #: gnu/packages/games.scm:3304
- msgid ""
- "CMatrix simulates the display from \"The Matrix\" and is\n"
- "based on the screensaver from the movie's website. It works with terminal\n"
- "settings up to 132x300 and can scroll lines all at the same rate or\n"
- "asynchronously and at a user-defined speed."
- msgstr ""
- #: gnu/packages/games.scm:3334
- msgid "Full chess implementation"
- msgstr ""
- #: gnu/packages/games.scm:3335
- msgid ""
- "GNU Chess is a chess engine. It allows you to compete\n"
- "against the computer in a game of chess, either through the default terminal\n"
- "interface or via an external visual interface such as GNU XBoard."
- msgstr ""
- #: gnu/packages/games.scm:3395
- msgid "Twisted adventures of young pig farmer Dink Smallwood"
- msgstr ""
- #: gnu/packages/games.scm:3397
- msgid ""
- "GNU FreeDink is a free and portable re-implementation of the engine\n"
- "for the role-playing game Dink Smallwood. It supports not only the original\n"
- "game data files but it also supports user-produced game mods or \"D-Mods\".\n"
- "To that extent, it also includes a front-end for managing all of your D-Mods."
- msgstr ""
- #: gnu/packages/games.scm:3423
- msgid "Game data for GNU Freedink"
- msgstr ""
- #: gnu/packages/games.scm:3425
- msgid "This package contains the game data of GNU Freedink."
- msgstr "이 꾸러미는 GNU Freedink의 게임 자료를 포함합니다."
- #: gnu/packages/games.scm:3447
- msgid "Front-end for managing and playing Dink Modules"
- msgstr ""
- #: gnu/packages/games.scm:3448
- msgid ""
- "DFArc makes it easy to play and manage the GNU FreeDink game\n"
- "and its numerous D-Mods."
- msgstr ""
- #: gnu/packages/games.scm:3517
- msgid "Graphical user interface for chess programs"
- msgstr "체스 프로그램을 위한 그래픽 사용자 연결장치"
- #: gnu/packages/games.scm:3518
- msgid ""
- "GNU XBoard is a graphical board for all varieties of chess,\n"
- "including international chess, xiangqi (Chinese chess), shogi (Japanese chess)\n"
- "and Makruk. Several lesser-known variants are also supported. It presents a\n"
- "fully interactive graphical interface and it can load and save games in the\n"
- "Portable Game Notation."
- msgstr ""
- #: gnu/packages/games.scm:3551
- msgid "Typing tutor"
- msgstr ""
- #: gnu/packages/games.scm:3553
- msgid ""
- "GNU Typist is a universal typing tutor. It can be used to learn and\n"
- "practice touch-typing. Several tutorials are included; in addition to\n"
- "tutorials for the standard QWERTY layout, there are also tutorials for the\n"
- "alternative layouts Dvorak and Colemak, as well as for the numpad. Tutorials\n"
- "are primarily in English, however some in other languages are provided."
- msgstr ""
- #: gnu/packages/games.scm:3629
- msgid "3D game engine written in C++"
- msgstr ""
- #: gnu/packages/games.scm:3631
- msgid ""
- "The Irrlicht Engine is a high performance realtime 3D engine written in\n"
- "C++. Features include an OpenGL renderer, extensible materials, scene graph\n"
- "management, character animation, particle and other special effects, support\n"
- "for common mesh file formats, and collision detection."
- msgstr ""
- #: gnu/packages/games.scm:3703
- msgid "2D space shooter"
- msgstr ""
- #: gnu/packages/games.scm:3705
- msgid ""
- "M.A.R.S. is a 2D space shooter with pretty visual effects and\n"
- "attractive physics. Players can battle each other or computer controlled\n"
- "enemies in different game modes such as space ball, death match, team death\n"
- "match, cannon keep, and grave-itation pit."
- msgstr ""
- #: gnu/packages/games.scm:3742
- msgid "Curses Implementation of the Glk API"
- msgstr ""
- #: gnu/packages/games.scm:3744
- msgid ""
- "Glk defines a portable API for applications with text UIs. It was\n"
- "primarily designed for interactive fiction, but it should be suitable for many\n"
- "interactive text utilities, particularly those based on a command line.\n"
- "This is an implementation of the Glk library which runs in a terminal window,\n"
- "using the @code{curses.h} library for screen control."
- msgstr ""
- #: gnu/packages/games.scm:3782
- msgid "Interpreter for Glulx VM"
- msgstr ""
- #: gnu/packages/games.scm:3784
- msgid ""
- "Glulx is a 32-bit portable virtual machine intended for writing and\n"
- "playing interactive fiction. It was designed by Andrew Plotkin to relieve\n"
- "some of the restrictions in the venerable Z-machine format. This is the\n"
- "reference interpreter, using the Glk API."
- msgstr ""
- #: gnu/packages/games.scm:3808
- msgid "Cross platform GUI library specifically for games"
- msgstr ""
- #: gnu/packages/games.scm:3810
- msgid ""
- "Fifechan is a lightweight cross platform GUI library written in C++\n"
- "specifically designed for games. It has a built in set of extendable GUI\n"
- "Widgets, and allows users to create more."
- msgstr ""
- #: gnu/packages/games.scm:3883
- msgid "FIFE is a multi-platform isometric game engine written in C++"
- msgstr ""
- #: gnu/packages/games.scm:3885
- msgid ""
- "@acronym{FIFE, Flexible Isometric Free Engine} is a multi-platform\n"
- "isometric game engine. Python bindings are included allowing users to create\n"
- "games using Python as well as C++."
- msgstr ""
- #: gnu/packages/games.scm:3918
- msgid "Z-machine interpreter"
- msgstr ""
- #: gnu/packages/games.scm:3920
- msgid ""
- "Fizmo is a console-based Z-machine interpreter. It is used to play\n"
- "interactive fiction, also known as text adventures, which were implemented\n"
- "either by Infocom or created using the Inform compiler."
- msgstr ""
- #: gnu/packages/games.scm:3941
- msgid "Play the game of Go"
- msgstr ""
- #: gnu/packages/games.scm:3943
- msgid ""
- "GNU Go is a program that plays the game of Go, in which players\n"
- "place stones on a grid to form territory or capture other stones. While\n"
- "it can be played directly from the terminal, rendered in ASCII characters,\n"
- "it is also possible to play GNU Go with 3rd party graphical interfaces or\n"
- "even in Emacs. It supports the standard game storage format (SGF, Smart\n"
- "Game Format) and inter-process communication format (GMP, Go Modem\n"
- "Protocol)."
- msgstr ""
- #: gnu/packages/games.scm:3970
- msgid "High-speed arctic racing game based on Tux Racer"
- msgstr ""
- #: gnu/packages/games.scm:3972
- msgid ""
- "Extreme Tux Racer, or etracer as it is called for short, is\n"
- "a simple OpenGL racing game featuring Tux, the Linux mascot. The goal of the\n"
- "game is to slide down a snow- and ice-covered mountain as quickly as possible,\n"
- "avoiding the trees and rocks that will slow you down.\n"
- "\n"
- "Collect herrings and other goodies while sliding down the hill, but avoid fish\n"
- "bones.\n"
- "\n"
- "This game is based on the GPL version of the famous game TuxRacer."
- msgstr ""
- #: gnu/packages/games.scm:4066
- msgid "Role-playing game engine compatible with Ultima VII"
- msgstr ""
- #: gnu/packages/games.scm:4068
- #, scheme-format
- msgid ""
- "Exult is an Ultima 7 game engine that runs on modern operating systems.\n"
- "Ultima 7 (or Ultima VII) is a two-part @acronym{RPG, role-playing game} from the\n"
- "early 1990s.\n"
- "\n"
- "Exult is fully compatible with the original Ultima 7, but doesn't require any\n"
- "of its data files to be useful. Explore entirely new game worlds---or create\n"
- "your own with the included game and map editor, Exult Studio.\n"
- "\n"
- "This package expects the game(s) to be placed in subdirectories of\n"
- "@file{~/.local/share/exult}."
- msgstr ""
- #: gnu/packages/games.scm:4141
- msgid "3D kart racing game"
- msgstr ""
- #: gnu/packages/games.scm:4142
- msgid ""
- "SuperTuxKart is a 3D kart racing game, with a focus on\n"
- "having fun over realism. You can play with up to 4 friends on one PC, racing\n"
- "against each other or just trying to beat the computer; single-player mode is\n"
- "also available."
- msgstr ""
- #: gnu/packages/games.scm:4216
- msgid "Isometric realtime strategy, economy and city building simulation"
- msgstr ""
- #: gnu/packages/games.scm:4218
- msgid ""
- "Unknown Horizons is a 2D realtime strategy simulation with an emphasis\n"
- "on economy and city building. Expand your small settlement to a strong and\n"
- "wealthy colony, collect taxes and supply your inhabitants with valuable\n"
- "goods. Increase your power with a well balanced economy and with strategic\n"
- "trade and diplomacy."
- msgstr ""
- #: gnu/packages/games.scm:4269
- msgid "Game of jumping to the next floor, trying not to fall"
- msgstr ""
- #: gnu/packages/games.scm:4271
- msgid ""
- "GNUjump is a simple, yet addictive game in which you must jump from\n"
- "platform to platform to avoid falling, while the platforms drop at faster rates\n"
- "the higher you go. The game features multiplayer, unlimited FPS, smooth floor\n"
- "falling, themeable graphics and sounds, and replays."
- msgstr ""
- #: gnu/packages/games.scm:4305
- msgid "Turn-based strategy game"
- msgstr ""
- #: gnu/packages/games.scm:4307
- msgid ""
- "The Battle for Wesnoth is a fantasy, turn based tactical strategy game,\n"
- "with several single player campaigns, and multiplayer games (both networked and\n"
- "local).\n"
- "\n"
- "Battle for control on a range of maps, using variety of units which have\n"
- "advantages and disadvantages against different types of attacks. Units gain\n"
- "experience and advance levels, and are carried over from one scenario to the\n"
- "next campaign."
- msgstr ""
- #: gnu/packages/games.scm:4326
- msgid "Dedicated @emph{Battle for Wesnoth} server"
- msgstr ""
- #: gnu/packages/games.scm:4327
- msgid ""
- "This package contains a dedicated server for @emph{The\n"
- "Battle for Wesnoth}."
- msgstr ""
- #: gnu/packages/games.scm:4367
- msgid "Mouse and keyboard discovery for children"
- msgstr ""
- #: gnu/packages/games.scm:4369
- msgid ""
- "Gamine is a game designed for young children who are learning to use the\n"
- "mouse and keyboard. The child uses the mouse to draw colored dots and lines\n"
- "on the screen and keyboard to display letters."
- msgstr ""
- #: gnu/packages/games.scm:4399
- msgid "Client for 'The Mana World' and similar games"
- msgstr ""
- #: gnu/packages/games.scm:4401
- msgid ""
- "ManaPlus is a 2D MMORPG client for game servers. It is the only\n"
- "fully supported client for @uref{http://www.themanaworld.org, The mana\n"
- "world}, @uref{http://evolonline.org, Evol Online} and\n"
- "@uref{http://landoffire.org, Land of fire}."
- msgstr ""
- #: gnu/packages/games.scm:4432
- msgid "Transportation economics simulator game"
- msgstr ""
- #: gnu/packages/games.scm:4433
- msgid ""
- "OpenTTD is a game in which you transport goods and\n"
- "passengers by land, water and air. It is a re-implementation of Transport\n"
- "Tycoon Deluxe with many enhancements including multiplayer mode,\n"
- "internationalization support, conditional orders and the ability to clone,\n"
- "autoreplace and autoupdate vehicles. This package only includes the game\n"
- "engine. When you start it you will be prompted to download a graphics set."
- msgstr ""
- #: gnu/packages/games.scm:4494
- msgid "Base graphics set for OpenTTD"
- msgstr ""
- #: gnu/packages/games.scm:4496
- msgid ""
- "The OpenGFX project is an implementation of the OpenTTD base graphics\n"
- "set that aims to ensure the best possible out-of-the-box experience.\n"
- "\n"
- "OpenGFX provides you with...\n"
- "@enumerate\n"
- "@item All graphics you need to enjoy OpenTTD.\n"
- "@item Uniquely drawn rail vehicles for every climate.\n"
- "@item Completely snow-aware rivers.\n"
- "@item Different river and sea water.\n"
- "@item Snow-aware buoys.\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/games.scm:4553
- msgid "Base sounds for OpenTTD"
- msgstr ""
- #: gnu/packages/games.scm:4554
- msgid ""
- "OpenSFX is a set of free base sounds for OpenTTD which make\n"
- "it possible to play OpenTTD without requiring the proprietary sound files from\n"
- "the original Transport Tycoon Deluxe."
- msgstr ""
- #: gnu/packages/games.scm:4597
- msgid "Music set for OpenTTD"
- msgstr ""
- #: gnu/packages/games.scm:4598
- msgid ""
- "OpenMSX is a music set for OpenTTD which makes it possible\n"
- "to play OpenTTD without requiring the proprietary music from the original\n"
- "Transport Tycoon Deluxe."
- msgstr ""
- #: gnu/packages/games.scm:4675
- msgid "Title sequences for OpenRCT2"
- msgstr ""
- #: gnu/packages/games.scm:4677
- msgid "openrct2-title-sequences is a set of title sequences for OpenRCT2."
- msgstr ""
- #: gnu/packages/games.scm:4715
- msgid "Objects for OpenRCT2"
- msgstr ""
- #: gnu/packages/games.scm:4717
- msgid "openrct2-objects is a set of objects for OpenRCT2."
- msgstr ""
- #: gnu/packages/games.scm:4779
- msgid "Free software re-implementation of RollerCoaster Tycoon 2"
- msgstr ""
- #: gnu/packages/games.scm:4780
- msgid ""
- "OpenRCT2 is a free software re-implementation of\n"
- "RollerCoaster Tycoon 2 (RCT2). The gameplay revolves around building and\n"
- "maintaining an amusement park containing attractions, shops and facilities.\n"
- "\n"
- "Note that this package does @emph{not} provide the game assets (sounds,\n"
- "images, etc.)"
- msgstr ""
- #: gnu/packages/games.scm:4816
- msgid "Japanese Mahjong client"
- msgstr ""
- #: gnu/packages/games.scm:4818
- msgid ""
- "OpenRiichi is a client for playing Japanese Mahjong, and it supports\n"
- "singleplayer and multiplayer, with or without bots. It features all the\n"
- "standard riichi rules, as well as some optional ones. It also supports game\n"
- "logging, so games can be viewed again."
- msgstr ""
- #: gnu/packages/games.scm:4867
- msgid "Pinball simulator"
- msgstr ""
- #: gnu/packages/games.scm:4868
- msgid ""
- "The Emilia Pinball Project is a pinball simulator. There\n"
- "are only two levels to play with, but they are very addictive."
- msgstr ""
- #: gnu/packages/games.scm:4896
- msgid "Board game inspired by The Settlers of Catan"
- msgstr ""
- #: gnu/packages/games.scm:4897
- msgid ""
- "Pioneers is an emulation of the board game The Settlers of\n"
- "Catan. It can be played on a local network, on the internet, and with AI\n"
- "players."
- msgstr ""
- #: gnu/packages/games.scm:4938 gnu/packages/gnome.scm:5424
- msgid "Logic puzzle game"
- msgstr ""
- #: gnu/packages/games.scm:4939
- msgid ""
- "The goal of this logic game is to open all cards in a 6x6\n"
- "grid, using a number of hints as to their relative position. The game idea\n"
- "is attributed to Albert Einstein."
- msgstr ""
- #: gnu/packages/games.scm:4967
- msgid "MUD and telnet client"
- msgstr ""
- #: gnu/packages/games.scm:4969
- msgid ""
- "POWWOW is a client software which can be used for telnet as well as for\n"
- "@dfn{Multi-User Dungeon} (MUD). Additionally it can serve as a nice client for\n"
- "the chat server psyced with the specific config located at\n"
- "http://lavachat.symlynx.com/unix/"
- msgstr ""
- #: gnu/packages/games.scm:5074
- msgid "Arena shooter derived from the Cube 2 engine"
- msgstr ""
- #: gnu/packages/games.scm:5076
- msgid ""
- "Red Eclipse is an arena shooter, created from the Cube2 engine.\n"
- "Offering an innovative parkour system and distinct but all potent weapons,\n"
- "Red Eclipse provides fast paced and accessible gameplay."
- msgstr ""
- #: gnu/packages/games.scm:5139
- msgid "Text adventure game"
- msgstr ""
- #: gnu/packages/games.scm:5141
- msgid ""
- "Grue Hunter is a text adventure game written in Perl. You must make\n"
- "your way through an underground cave system in search of the Grue. Can you\n"
- "capture it and get out alive?"
- msgstr ""
- #: gnu/packages/games.scm:5178
- msgid "Old-school earthworm action game"
- msgstr ""
- #: gnu/packages/games.scm:5180
- msgid ""
- "lierolibre is an earthworm action game where you fight another player\n"
- "(or the computer) underground using a wide array of weapons.\n"
- "\n"
- "Features:\n"
- "@itemize\n"
- "@item 2 worms, 40 weapons, great playability, two game modes: Kill'em All\n"
- "and Game of Tag, plus AI-players without true intelligence!\n"
- "@item Dat nostalgia.\n"
- "@item Extensions via a hidden F1 menu:\n"
- "@itemize\n"
- "@item Replays\n"
- "@item Game controller support\n"
- "@item Powerlevel palettes\n"
- "@end itemize\n"
- "@item Ability to write game variables to plain text files.\n"
- "@item Ability to load game variables from both EXE and plain text files.\n"
- "@item Scripts to extract and repack graphics, sounds and levels.\n"
- "@end itemize\n"
- "\n"
- "To switch between different window sizes, use F6, F7 and F8, to switch to\n"
- "fullscreen, use F5 or Alt+Enter."
- msgstr ""
- #: gnu/packages/games.scm:5258
- msgid "Play tennis against the computer or a friend"
- msgstr ""
- #: gnu/packages/games.scm:5259
- msgid ""
- "Tennix is a 2D tennis game. You can play against the\n"
- "computer or against another player using the keyboard. The game runs\n"
- "in-window at 640x480 resolution or fullscreen."
- msgstr ""
- #: gnu/packages/games.scm:5342
- msgid "3D Real-time strategy and real-time tactics game"
- msgstr ""
- #: gnu/packages/games.scm:5344
- msgid ""
- "Warzone 2100 offers campaign, multi-player, and single-player skirmish\n"
- "modes. An extensive tech tree with over 400 different technologies, combined\n"
- "with the unit design system, allows for a wide variety of possible units and\n"
- "tactics."
- msgstr ""
- #: gnu/packages/games.scm:5418
- msgid "Fantasy real-time strategy game"
- msgstr ""
- #: gnu/packages/games.scm:5420
- msgid ""
- "In Widelands, you are the regent of a small clan. You start out with\n"
- "nothing but your headquarters, where all your resources are stored.\n"
- "\n"
- "In the course of the game, you will build an ever growing settlement. Every\n"
- "member of your clan will do his or her part to produce more resources---wood,\n"
- "food, iron, gold and more---to further this growth. The economic network is\n"
- "complex and different in the five tribes (Barbarians, Empire, Atlanteans,\n"
- "Frisians and Amazons).\n"
- "\n"
- "As you are not alone in the world, you will meet other clans sooner or later.\n"
- "Some of them may be friendly and you may eventually trade with them. However,\n"
- "if you want to rule the world, you will have to train soldiers and fight.\n"
- "\n"
- "Widelands offers single-player mode with different campaigns; the campaigns\n"
- "all tell stories of tribes and their struggle in the Widelands universe!\n"
- "However, settling really starts when you unite with friends over the Internet\n"
- "or LAN to build up new empires together---or to crush each other in the dusts\n"
- "of war. Widelands also offers an Artificial Intelligence to challenge you."
- msgstr ""
- #: gnu/packages/games.scm:5470
- msgid "2D scrolling shooter game"
- msgstr ""
- #: gnu/packages/games.scm:5472
- msgid ""
- "In the year 2579, the intergalactic weapons corporation, WEAPCO, has\n"
- "dominated the galaxy. Guide Chris Bainfield and his friend Sid Wilson on\n"
- "their quest to liberate the galaxy from the clutches of WEAPCO. Along the\n"
- "way, you will encounter new foes, make new allies, and assist local rebels\n"
- "in strikes against the evil corporation."
- msgstr ""
- #: gnu/packages/games.scm:5501
- msgid "Fast-paced, arcade-style, top-scrolling space shooter"
- msgstr ""
- #: gnu/packages/games.scm:5503
- msgid ""
- "In this game you are the captain of the cargo ship Chromium B.S.U. and\n"
- "are responsible for delivering supplies to the troops on the front line. Your\n"
- "ship has a small fleet of robotic fighters which you control from the relative\n"
- "safety of the Chromium vessel."
- msgstr ""
- #: gnu/packages/games.scm:5584
- msgid "Drawing software for children"
- msgstr ""
- #: gnu/packages/games.scm:5586
- msgid ""
- "Tux Paint is a free drawing program designed for young children (kids\n"
- "ages 3 and up). It has a simple, easy-to-use interface; fun sound effects;\n"
- "and an encouraging cartoon mascot who helps guide children as they use the\n"
- "program. It provides a blank canvas and a variety of drawing tools to help\n"
- "your child be creative."
- msgstr ""
- #: gnu/packages/games.scm:5624
- msgid "Stamp images for Tux Paint"
- msgstr ""
- #: gnu/packages/games.scm:5626
- msgid ""
- "This package contains a set of \"Rubber Stamp\" images which can be used\n"
- "with the \"Stamp\" tool within Tux Paint."
- msgstr ""
- #: gnu/packages/games.scm:5673
- msgid "Configure Tux Paint"
- msgstr ""
- #: gnu/packages/games.scm:5675
- msgid "Tux Paint Config is a graphical configuration editor for Tux Paint."
- msgstr ""
- #: gnu/packages/games.scm:5726
- msgid "2D platformer game"
- msgstr ""
- #: gnu/packages/games.scm:5727
- msgid ""
- "SuperTux is a classic 2D jump'n run sidescroller game in\n"
- "a style similar to the original Super Mario games."
- msgstr ""
- #: gnu/packages/games.scm:5757
- msgid "MUD client"
- msgstr ""
- #: gnu/packages/games.scm:5759
- msgid ""
- "TinTin++ is a MUD client which supports MCCP (Mud Client Compression\n"
- "Protocol), MMCP (Mud Master Chat Protocol), xterm 256 colors, most TELNET\n"
- "options used by MUDs, as well as those required to login via telnet on\n"
- "Linux / Mac OS X servers, and an auto mapper with a VT100 map display."
- msgstr ""
- #: gnu/packages/games.scm:5795
- msgid "Programming game"
- msgstr ""
- #: gnu/packages/games.scm:5796
- msgid ""
- "Learn programming, playing with ants and spider webs ;-)\n"
- "Your robot ant can be programmed in many languages: OCaml, Python, C, C++,\n"
- "Java, Ruby, Lua, JavaScript, Pascal, Perl, Scheme, Vala, Prolog. Experienced\n"
- "programmers may also add their own favorite language."
- msgstr ""
- #: gnu/packages/games.scm:5834
- msgid "Keyboard mashing and doodling game for babies"
- msgstr ""
- #: gnu/packages/games.scm:5835
- msgid ""
- "Bambam is a simple baby keyboard (and gamepad) masher\n"
- "application that locks the keyboard and mouse and instead displays bright\n"
- "colors, pictures, and sounds."
- msgstr ""
- #: gnu/packages/games.scm:5894
- msgid "Arcade-style fire fighting game"
- msgstr ""
- #: gnu/packages/games.scm:5896
- msgid ""
- "Mr. Rescue is an arcade styled 2d action game centered around evacuating\n"
- "civilians from burning buildings. The game features fast-paced fire\n"
- "extinguishing action, intense boss battles, a catchy soundtrack, and lots of\n"
- "throwing people around in pseudo-randomly generated buildings."
- msgstr ""
- #: gnu/packages/games.scm:5963
- msgid "Non-euclidean graphical rogue-like game"
- msgstr ""
- #: gnu/packages/games.scm:5965
- msgid ""
- "HyperRogue is a game in which the player collects treasures and fights\n"
- "monsters -- rogue-like but for the fact that it is played on the hyperbolic\n"
- "plane and not in euclidean space.\n"
- "\n"
- "In HyperRogue, the player can move through different parts of the world, which\n"
- "are home to particular creatures and may be subject to their own rules of\n"
- "\"physics\".\n"
- "\n"
- "While the game can use ASCII characters to display the the classical rogue\n"
- "symbols, it still needs graphics to render the non-euclidean world."
- msgstr ""
- #: gnu/packages/games.scm:6010
- msgid "Shooter with space station destruction"
- msgstr ""
- #: gnu/packages/games.scm:6012
- msgid ""
- "Kobo Deluxe is an enhanced version of Akira Higuchi's XKobo graphical game\n"
- "for Un*x systems with X11."
- msgstr ""
- #: gnu/packages/games.scm:6039
- msgid "Turn-based empire building strategy game"
- msgstr ""
- #: gnu/packages/games.scm:6040
- msgid ""
- "Freeciv is a turn-based empire building strategy game\n"
- "inspired by the history of human civilization. The game commences in\n"
- "prehistory and your mission is to lead your tribe from the Stone Age\n"
- "into the Space Age."
- msgstr ""
- #: gnu/packages/games.scm:6071
- msgid "Recreation of data decryption effect in \"Sneakers\""
- msgstr ""
- #: gnu/packages/games.scm:6073
- msgid ""
- "@code{No More Secrets} provides a command line tool called \"nms\"\n"
- "that recreates the famous data decryption effect seen on screen in the 1992\n"
- "movie \"Sneakers\".\n"
- "\n"
- "This command works on piped data. Pipe any ASCII or UTF-8 text to nms, and\n"
- "it will apply the hollywood effect, initially showing encrypted data, then\n"
- "starting a decryption sequence to reveal the original plaintext characters."
- msgstr ""
- #: gnu/packages/games.scm:6100
- msgid "Data files for MegaGlest"
- msgstr ""
- #: gnu/packages/games.scm:6101
- msgid "This package contains the data files required for MegaGlest."
- msgstr ""
- #: gnu/packages/games.scm:6155
- msgid "3D real-time strategy (RTS) game"
- msgstr ""
- #: gnu/packages/games.scm:6156
- msgid ""
- "MegaGlest is a cross-platform 3D real-time strategy (RTS)\n"
- "game, where you control the armies of one of seven different factions: Tech,\n"
- "Magic, Egypt, Indians, Norsemen, Persian or Romans."
- msgstr ""
- #: gnu/packages/games.scm:6207
- msgid "Side-scrolling physics platformer with a ball of tar"
- msgstr ""
- #: gnu/packages/games.scm:6208
- msgid ""
- "In FreeGish you control Gish, a ball of tar who lives\n"
- "happily with his girlfriend Brea, until one day a mysterious dark creature\n"
- "emerges from a sewer hole and pulls her below ground."
- msgstr ""
- #: gnu/packages/games.scm:6243
- msgid "Classic overhead run-and-gun game"
- msgstr ""
- #: gnu/packages/games.scm:6244
- msgid ""
- "C-Dogs SDL is a classic overhead run-and-gun game,\n"
- "supporting up to 4 players in co-op and deathmatch modes. Customize your\n"
- "player, choose from many weapons, and blast, slide and slash your way through\n"
- "over 100 user-created campaigns."
- msgstr ""
- #: gnu/packages/games.scm:6343
- msgid "3D puzzle game"
- msgstr ""
- #: gnu/packages/games.scm:6344
- msgid ""
- "Kiki the nano bot is a 3D puzzle game. It is basically a\n"
- "mixture of the games Sokoban and Kula-World. Your task is to help Kiki, a\n"
- "small robot living in the nano world, repair its maker."
- msgstr ""
- #: gnu/packages/games.scm:6419
- msgid "2D retro multiplayer shooter game"
- msgstr ""
- #: gnu/packages/games.scm:6420
- msgid ""
- "Teeworlds is an online multiplayer game. Battle with up to\n"
- "16 players in a variety of game modes, including Team Deathmatch and Capture\n"
- "The Flag. You can even design your own maps!"
- msgstr ""
- #: gnu/packages/games.scm:6479
- msgid "Puzzle game with a dexterity component"
- msgstr ""
- #: gnu/packages/games.scm:6480
- msgid ""
- "Enigma is a puzzle game with 550 unique levels. The object\n"
- "of the game is to find and uncover pairs of identically colored ‘Oxyd’ stones.\n"
- "Simple? Yes. Easy? Certainly not! Hidden traps, vast mazes, laser beams,\n"
- "and most of all, countless hairy puzzles usually block your direct way to the\n"
- "Oxyd stones. Enigma’s game objects (and there are hundreds of them, lest you\n"
- "get bored) interact in many unexpected ways, and since many of them follow the\n"
- "laws of physics (Enigma’s special laws of physics, that is), controlling them\n"
- "with the mouse isn’t always trivial."
- msgstr ""
- #: gnu/packages/games.scm:6513
- msgid "Abstract puzzle game"
- msgstr ""
- #: gnu/packages/games.scm:6514
- msgid ""
- "Chroma is an abstract puzzle game. A variety of colourful\n"
- "shapes are arranged in a series of increasingly complex patterns, forming\n"
- "fiendish traps that must be disarmed and mysterious puzzles that must be\n"
- "manipulated in order to give up their subtle secrets. Initially so\n"
- "straightforward that anyone can pick it up and begin to play, yet gradually\n"
- "becoming difficult enough to tax even the brightest of minds."
- msgstr ""
- #: gnu/packages/games.scm:6578
- msgid "Puzzle game"
- msgstr ""
- #: gnu/packages/games.scm:6579
- msgid ""
- "Fish Fillets NG is strictly a puzzle game. The goal in\n"
- "every of the seventy levels is always the same: find a safe way out. The fish\n"
- "utter witty remarks about their surroundings, the various inhabitants of their\n"
- "underwater realm quarrel among themselves or comment on the efforts of your\n"
- "fish. The whole game is accompanied by quiet, comforting music."
- msgstr ""
- #: gnu/packages/games.scm:6652
- msgid "Roguelike dungeon crawler game"
- msgstr ""
- #: gnu/packages/games.scm:6653
- msgid ""
- "Dungeon Crawl Stone Soup (also known as \"Crawl\" or DCSS\n"
- "for short) is a roguelike adventure through dungeons filled with dangerous\n"
- "monsters in a quest to find the mystifyingly fabulous Orb of Zot."
- msgstr ""
- #: gnu/packages/games.scm:6693
- msgid "Graphical roguelike dungeon crawler game"
- msgstr ""
- #: gnu/packages/games.scm:6723
- msgid "Cross-platform third-person action game"
- msgstr ""
- #: gnu/packages/games.scm:6724
- msgid ""
- "Lugaru is a third-person action game. The main character,\n"
- "Turner, is an anthropomorphic rebel bunny rabbit with impressive combat skills.\n"
- "In his quest to find those responsible for slaughtering his village, he uncovers\n"
- "a far-reaching conspiracy involving the corrupt leaders of the rabbit republic\n"
- "and the starving wolves from a nearby den. Turner takes it upon himself to\n"
- "fight against their plot and save his fellow rabbits from slavery."
- msgstr ""
- #: gnu/packages/games.scm:6768
- msgid "Data files for 0ad"
- msgstr ""
- #: gnu/packages/games.scm:6769
- msgid "0ad-data provides the data files required by the game 0ad."
- msgstr ""
- #: gnu/packages/games.scm:6905
- msgid "3D real-time strategy game of ancient warfare"
- msgstr ""
- #: gnu/packages/games.scm:6906
- msgid ""
- "0 A.D. is a real-time strategy (RTS) game of ancient\n"
- "warfare. It's a historically-based war/economy game that allows players to\n"
- "relive or rewrite the history of twelve ancient civilizations, each depicted\n"
- "at their peak of economic growth and military prowess.\n"
- "\n"
- "0ad needs a window manager that supports 'Extended Window Manager Hints'."
- msgstr ""
- #: gnu/packages/games.scm:6969
- msgid "Colossal Cave Adventure"
- msgstr ""
- #: gnu/packages/games.scm:6971
- msgid ""
- "The original Colossal Cave Adventure from 1976 was the origin of all\n"
- "text adventures, dungeon-crawl (computer) games, and computer-hosted\n"
- "roleplaying games. This is a forward port of the last version released by\n"
- "Crowther & Woods, its original authors, in 1995. It has been known as\n"
- "``adventure 2.5'' and ``430-point adventure''."
- msgstr ""
- #: gnu/packages/games.scm:6988
- msgid "Single-player, RPG roguelike game set in the world of Eyal"
- msgstr ""
- #: gnu/packages/games.scm:7094
- msgid ""
- "Tales of Maj’Eyal (ToME) RPG, featuring tactical turn-based\n"
- "combat and advanced character building. Play as one of many unique races and\n"
- "classes in the lore-filled world of Eyal, exploring random dungeons, facing\n"
- "challenging battles, and developing characters with your own tailored mix of\n"
- "abilities and powers. With a modern graphical and customisable interface,\n"
- "intuitive mouse control, streamlined mechanics and deep, challenging combat,\n"
- "Tales of Maj’Eyal offers engaging roguelike gameplay for the 21st century."
- msgstr ""
- #: gnu/packages/games.scm:7139
- msgid "First person shooter engine for Quake 1"
- msgstr ""
- #: gnu/packages/games.scm:7140
- msgid ""
- "Quakespasm is a modern engine for id software's Quake 1.\n"
- "It includes support for 64 bit CPUs, custom music playback, a new sound driver,\n"
- "some graphical niceities, and numerous bug-fixes and other improvements."
- msgstr ""
- #: gnu/packages/games.scm:7197
- msgid ""
- "vkquake is a modern engine for id software's Quake 1.\n"
- "It includes support for 64 bit CPUs, custom music playback, a new sound driver,\n"
- "some graphical niceities, and numerous bug-fixes and other improvements."
- msgstr ""
- #: gnu/packages/games.scm:7261
- msgid "First person shooter engine based on quake2"
- msgstr ""
- #: gnu/packages/games.scm:7262
- msgid ""
- "Yamagi Quake II is an enhanced client for id Software's Quake II.\n"
- "The main focus is an unchanged single player experience like back in 1997,\n"
- "thus the gameplay and the graphics are unaltered. However the user may use one\n"
- "of the unofficial retexturing packs. In comparison with the official client,\n"
- "over 1000 bugs were fixed and an extensive code audit done,\n"
- "making Yamagi Quake II one of the most solid Quake II implementations available."
- msgstr ""
- #: gnu/packages/games.scm:7294
- msgid "Sudoku for your terminal"
- msgstr ""
- #: gnu/packages/games.scm:7295
- msgid "Nudoku is a ncurses-based Sudoku game for your terminal."
- msgstr ""
- #: gnu/packages/games.scm:7340
- msgid "Realistic physics puzzle game"
- msgstr ""
- #: gnu/packages/games.scm:7341
- msgid ""
- "The Butterfly Effect (tbe) is a game that uses\n"
- "realistic physics simulations to combine lots of simple mechanical\n"
- "elements to achieve a simple goal in the most complex way possible."
- msgstr ""
- #: gnu/packages/games.scm:7386
- msgid "Game of lonely space adventure"
- msgstr ""
- #: gnu/packages/games.scm:7388
- msgid ""
- "Pioneer is a space adventure game set in our galaxy at the turn of the\n"
- "31st century. The game is open-ended, and you are free to eke out whatever\n"
- "kind of space-faring existence you can think of. Look for fame or fortune by\n"
- "exploring the millions of star systems. Turn to a life of crime as a pirate,\n"
- "smuggler or bounty hunter. Forge and break alliances with the various\n"
- "factions fighting for power, freedom or self-determination. The universe is\n"
- "whatever you make of it."
- msgstr ""
- #: gnu/packages/games.scm:7415
- msgid "Hacking contribution graphs in git"
- msgstr ""
- #: gnu/packages/games.scm:7417
- msgid ""
- "Badass generates false commits for a range of dates, essentially\n"
- "hacking the gamification of contribution graphs on platforms such as\n"
- "Github or Gitlab."
- msgstr ""
- #: gnu/packages/games.scm:7489
- msgid "Educational programming strategy game"
- msgstr ""
- #: gnu/packages/games.scm:7490
- msgid ""
- "Colobot: Gold Edition is a real-time strategy game, where\n"
- "you can program your units (bots) in a language called CBOT, which is similar\n"
- "to C++ and Java. Your mission is to find a new planet to live and survive.\n"
- "You can save humanity and get programming skills!"
- msgstr ""
- #: gnu/packages/games.scm:7581
- msgid "Modern Doom 2 source port"
- msgstr ""
- #: gnu/packages/games.scm:7582
- msgid ""
- "GZdoom is a port of the Doom 2 game engine, with a modern\n"
- "renderer. It improves modding support with ZDoom's advanced mapping features\n"
- "and the new ZScript language. In addition to Doom, it supports Heretic, Hexen,\n"
- "Strife, Chex Quest, and fan-created games like Harmony, Hacx and Freedoom."
- msgstr ""
- #: gnu/packages/games.scm:7620
- msgid "Multiplayer Doom port"
- msgstr ""
- #: gnu/packages/games.scm:7621
- msgid ""
- "Odamex is a modification of the Doom engine that\n"
- "allows players to easily join servers dedicated to playing Doom\n"
- "online."
- msgstr ""
- #: gnu/packages/games.scm:7646
- msgid ""
- "Doom source port preserving the look, feel, and bugs of vanilla\n"
- "Doom"
- msgstr ""
- #: gnu/packages/games.scm:7649
- msgid ""
- "Chocolate Doom takes a different approach to other source ports. Its\n"
- "aim is to accurately reproduce the experience of playing Vanilla Doom. It is\n"
- "a conservative, historically accurate Doom source port, which is compatible\n"
- "with the thousands of mods and levels that were made before the Doom source\n"
- "code was released. Rather than flashy new graphics, Chocolate Doom's main\n"
- "features are its accurate reproduction of the game as it was played in the\n"
- "1990s. The project is developed around a carefully-considered philosophy that\n"
- "intentionally restricts which features may be added (and rejects any that\n"
- "affect gameplay)."
- msgstr ""
- #: gnu/packages/games.scm:7686
- msgid ""
- "Limit-removing enhanced-resolution Doom source port based on\n"
- "Chocolate Doom"
- msgstr ""
- #: gnu/packages/games.scm:7689
- msgid ""
- "Crispy Doom is a friendly fork of Chocolate Doom that provides a higher\n"
- "display resolution, removes the static limits of the Doom engine and offers\n"
- "further optional visual, tactical and physical enhancements while remaining\n"
- "entirely config file, savegame, netplay and demo compatible with the\n"
- "original."
- msgstr ""
- #: gnu/packages/games.scm:7727
- msgid "Data files for Xonotic"
- msgstr ""
- #: gnu/packages/games.scm:7729
- msgid "Xonotic-data provides the data files required by the game Xonotic."
- msgstr ""
- #: gnu/packages/games.scm:7873
- msgid "Fast-paced first-person shooter game"
- msgstr ""
- #: gnu/packages/games.scm:7875
- msgid ""
- "Xonotic is a free, fast-paced first-person shooter.\n"
- "The project is geared towards providing addictive arena shooter\n"
- "gameplay which is all spawned and driven by the community itself.\n"
- "Xonotic is a direct successor of the Nexuiz project with years of\n"
- "development between them, and it aims to become the best possible\n"
- "open-source FPS of its kind."
- msgstr ""
- #: gnu/packages/games.scm:7918
- msgid "Portable Z-machine interpreter (ncurses version) for text adventure games"
- msgstr ""
- #: gnu/packages/games.scm:7919
- msgid ""
- "Frotz is an interpreter for Infocom games and other Z-machine\n"
- "games in the text adventure/interactive fiction genre. This version of Frotz\n"
- "complies with standard 1.0 of Graham Nelson's specification. It plays all\n"
- "Z-code games V1-V8, including V6, with sound support through libao, and uses\n"
- "ncurses for text display."
- msgstr ""
- #: gnu/packages/games.scm:7967
- msgid "Game about space exploration, trade and combat"
- msgstr ""
- #: gnu/packages/games.scm:7969
- msgid ""
- "Naev is a 2d action/rpg space game that combines elements from\n"
- "the action, RPG and simulation genres. You pilot a spaceship from\n"
- "a top-down perspective, and are more or less free to do what you want.\n"
- "As the genre name implies, you’re able to trade and engage in combat\n"
- "at will. Beyond that, there’s an ever-growing number of story-line\n"
- "missions, equipment, and ships; even the galaxy itself grows larger\n"
- "with each release. For the literacy-inclined, there are large amounts\n"
- "of lore accompanying everything from planets to equipment."
- msgstr ""
- #: gnu/packages/games.scm:8016
- msgid "Portable Z-machine dumb interpreter for text adventure games"
- msgstr ""
- #: gnu/packages/games.scm:8017
- msgid ""
- "Frotz is an interpreter for Infocom games and\n"
- "other Z-machine games in the text adventure/interactive fiction genre.\n"
- "dfrotz is the dumb interface version. You get no screen control; everything\n"
- "is just printed to the terminal line by line. The terminal handles all the\n"
- "scrolling. Maybe you'd like to experience what it's like to play Adventure on\n"
- "a teletype. A much cooler use for compiling Frotz with the dumb interface is\n"
- "that it can be wrapped in CGI scripting, PHP, and the like to allow people\n"
- "to play games on webpages. It can also be made into a chat bot."
- msgstr ""
- #: gnu/packages/games.scm:8078
- msgid "Portable Z-machine interpreter (SDL port) for text adventure games"
- msgstr ""
- #: gnu/packages/games.scm:8079
- msgid ""
- "Frotz is an interpreter for Infocom games and other Z-machine\n"
- "games in the text adventure/interactive fiction genre. This version of Frotz\n"
- "using SDL fully supports all these versions of the Z-Machine including the\n"
- "graphical version 6. Graphics and sound are created through the use of the SDL\n"
- "libraries. AIFF sound effects and music in MOD and OGG formats are supported\n"
- "when packaged in Blorb container files or optionally from individual files."
- msgstr ""
- #: gnu/packages/games.scm:8168
- msgid "Puzzle with bubbles"
- msgstr ""
- #: gnu/packages/games.scm:8170
- msgid ""
- "Frozen-Bubble is a clone of the popular Puzzle Bobble game, in which\n"
- "you attempt to shoot bubbles into groups of the same color to cause them to\n"
- "pop.\n"
- "\n"
- "Players compete as penguins and must use the arrow keys to aim a colored\n"
- "bubble at groups of bubbles. The objective is to clear all the bubbles off\n"
- "the screen before a bubble passes below a line at the bottom.\n"
- "\n"
- "It features 100 single-player levels, a two-player mode, music and striking\n"
- "graphics. A level editor is also included to allow players to create and play\n"
- "their own levels."
- msgstr ""
- #: gnu/packages/games.scm:8202
- msgid "Game controller library"
- msgstr ""
- #: gnu/packages/games.scm:8203
- msgid ""
- "Libmanette is a small GObject library giving you simple\n"
- "access to game controllers. It supports the de-facto standard gamepads as\n"
- "defined by the W3C standard Gamepad specification or as implemented by the SDL\n"
- "GameController."
- msgstr ""
- #: gnu/packages/games.scm:8248
- msgid "GNOME version of Tetris"
- msgstr ""
- #: gnu/packages/games.scm:8249
- msgid ""
- "Quadrapassel comes from the classic falling-block game,\n"
- "Tetris. The goal of the game is to create complete horizontal lines of\n"
- "blocks, which will disappear. The blocks come in seven different shapes made\n"
- "from four blocks each: one straight, two L-shaped, one square, and two\n"
- "S-shaped. The blocks fall from the top center of the screen in a random\n"
- "order. You rotate the blocks and move them across the screen to drop them in\n"
- "complete lines. You score by dropping blocks fast and completing lines. As\n"
- "your score gets higher, you level up and the blocks fall faster."
- msgstr ""
- #: gnu/packages/games.scm:8297
- msgid "2D space trading and combat game"
- msgstr ""
- #: gnu/packages/games.scm:8298
- msgid ""
- "Endless Sky is a 2D space trading and combat game. Explore\n"
- "other star systems. Earn money by trading, carrying passengers, or completing\n"
- "missions. Use your earnings to buy a better ship or to upgrade the weapons and\n"
- "engines on your current one. Blow up pirates. Take sides in a civil war. Or\n"
- "leave human space behind and hope to find friendly aliens whose culture is more\n"
- "civilized than your own."
- msgstr ""
- #: gnu/packages/games.scm:8446
- msgid "Advanced rhythm game designed for both home and arcade use"
- msgstr ""
- #: gnu/packages/games.scm:8447
- msgid ""
- "StepMania is a dance and rhythm game. It features 3D\n"
- "graphics, keyboard and dance pad support, and an editor for creating your own\n"
- "steps.\n"
- "\n"
- "This package provides the core application, but no song is shipped. You need\n"
- "to download and install them in @file{$HOME/.stepmania-X.Y/Songs} directory."
- msgstr ""
- #: gnu/packages/games.scm:8482
- msgid "Rhythm game in which you click on circles"
- msgstr ""
- #: gnu/packages/games.scm:8483
- msgid ""
- "@i{oshu!} is a minimalist variant of the @i{osu!} rhythm game,\n"
- "which is played by pressing buttons and following along sliders as they appear\n"
- "on screen. Its aim is to be able to play any beatmap even on low-end hardware.\n"
- "\n"
- "This package provides the core application, but no beatmaps. You need to\n"
- "download and unpack them separately."
- msgstr ""
- #: gnu/packages/games.scm:8565
- msgid "Multiplayer tank battle game"
- msgstr ""
- #: gnu/packages/games.scm:8566
- msgid ""
- "Battle Tanks (also known as \"btanks\") is a funny battle\n"
- "game, where you can choose one of three vehicles and eliminate your enemy\n"
- "using the whole arsenal of weapons. It has original cartoon-like graphics and\n"
- "cool music, it’s fun and dynamic, it has several network modes for deathmatch\n"
- "and cooperative."
- msgstr ""
- #: gnu/packages/games.scm:8598
- msgid "Unrealistic 2D volleyball simulation"
- msgstr ""
- #: gnu/packages/games.scm:8600
- msgid ""
- "Slime Volley is a 2D arcade-oriented volleyball simulation, in\n"
- "the spirit of some Java games of the same name.\n"
- "\n"
- "Two teams, 1-3 players each, try to be the first to get 10 points.\n"
- "This happens when the one ball touches the floor on the other side of\n"
- "the net. There can be 1 to 8 balls in game. Once one ball touches\n"
- "the ground, the set ends and all balls are served again."
- msgstr ""
- #: gnu/packages/games.scm:8650
- msgid "4D Tetris"
- msgstr ""
- #: gnu/packages/games.scm:8651
- msgid ""
- "4D-TRIS is an alteration of the well-known Tetris game. The\n"
- "game field is extended to 4D space, which has to filled up by the gamer with\n"
- "4D hyper cubes."
- msgstr ""
- #: gnu/packages/games.scm:8726
- msgid "Port of Arx Fatalis, a first-person role-playing game"
- msgstr ""
- #: gnu/packages/games.scm:8727
- msgid ""
- "Arx Libertatis is a cross-platform port of Arx Fatalis, a 2002\n"
- "first-person role-playing game / dungeon crawler developed by Arkane Studios.\n"
- "This port however does not include the game data, so you need to obtain a copy\n"
- "of the original Arx Fatalis or its demo to play Arx Libertatis. Arx Fatalis\n"
- "features crafting, melee and ranged combat, as well as a unique casting system\n"
- "where the player draws runes in real time to effect the desired spell."
- msgstr ""
- #: gnu/packages/games.scm:8772
- msgid "2d action platformer game"
- msgstr ""
- #: gnu/packages/games.scm:8773
- msgid ""
- "The Legend of Edgar is a 2D platform game with a persistent world.\n"
- "When Edgar's father fails to return home after venturing out one dark and stormy night,\n"
- "Edgar fears the worst: he has been captured by the evil sorcerer who lives in\n"
- "a fortress beyond the forbidden swamp."
- msgstr ""
- #: gnu/packages/games.scm:8874
- msgid "Multiplayer action game where you control small and nimble humanoids"
- msgstr ""
- #: gnu/packages/games.scm:8875
- msgid ""
- "OpenClonk is a multiplayer action/tactics/skill game. It is\n"
- "often referred to as a mixture of The Settlers and Worms. In a simple 2D\n"
- "antfarm-style landscape, the player controls a crew of Clonks, small but\n"
- "robust humanoid beings. The game encourages free play but the normal goal is\n"
- "to either exploit valuable resources from the earth by building a mine or\n"
- "fight each other on an arena-like map."
- msgstr ""
- #: gnu/packages/games.scm:8907
- msgid "Action Roleplaying Engine"
- msgstr ""
- #: gnu/packages/games.scm:8908
- msgid ""
- "Flare (Free Libre Action Roleplaying Engine) is a simple\n"
- "game engine built to handle a very specific kind of game: single-player 2D\n"
- "action RPGs."
- msgstr ""
- #: gnu/packages/games.scm:8970
- msgid "Fantasy action RPG using the FLARE engine"
- msgstr ""
- #: gnu/packages/games.scm:8971
- msgid ""
- "Flare is a single-player 2D action RPG with\n"
- "fast-paced action and a dark fantasy style."
- msgstr ""
- #: gnu/packages/games.scm:9022
- msgid "Action-adventure dungeon crawl game"
- msgstr ""
- #: gnu/packages/games.scm:9023
- msgid ""
- "Far below the surface of the planet is a place of limitless\n"
- "power. Those that seek to control such a utopia will soon bring an end to\n"
- "themselves. Seeking an end to the troubles that plague him, PSI user Merit\n"
- "journeys into the hallowed Orcus Dome in search of answers.\n"
- "\n"
- "Meritous is a action-adventure game with simple controls but a challenge to\n"
- "find a balance of power versus recovery time during real-time battles. Set in\n"
- "a procedurally generated world, the player can explore thousands of rooms in\n"
- "search of powerful artifacts, tools to help them, and to eventually free the\n"
- "Orcus Dome from evil."
- msgstr ""
- #: gnu/packages/games.scm:9084
- msgid "Guide a marble across fractal landscapes"
- msgstr ""
- #: gnu/packages/games.scm:9085
- msgid ""
- "Marble Marcher is a video game that uses a fractal physics\n"
- "engine and fully procedural rendering to produce beautiful and unique\n"
- "gameplay. The game is played on the surface of evolving fractals. The goal\n"
- "of the game is to get your marble to the flag as quickly as possible. But be\n"
- "careful not to fall off the level or get crushed by the fractal! There are 24\n"
- "levels to unlock."
- msgstr ""
- #: gnu/packages/games.scm:9135
- msgid "Libraries for 3D simulations and games"
- msgstr ""
- #: gnu/packages/games.scm:9136
- msgid ""
- "SimGear is a set of libraries designed to be used as\n"
- "building blocks for quickly assembling 3D simulations, games, and\n"
- "visualization applications. SimGear is developed by the FlightGear project\n"
- "and also provides the base for the FlightGear Flight Simulator."
- msgstr ""
- #: gnu/packages/games.scm:9227
- msgid "Flight simulator"
- msgstr ""
- #: gnu/packages/games.scm:9228
- msgid ""
- "The goal of the FlightGear project is to create a\n"
- "sophisticated flight simulator framework for use in research or academic\n"
- "environments, pilot training, as an industry engineering tool, for DIY-ers to\n"
- "pursue their favorite interesting flight simulation idea, and last but\n"
- "certainly not least as a fun, realistic, and challenging desktop flight\n"
- "simulator."
- msgstr ""
- #: gnu/packages/games.scm:9280
- msgid "Multiplayer platform game with bunnies"
- msgstr ""
- #: gnu/packages/games.scm:9281
- msgid ""
- "You, as a bunny, have to jump on your opponents to make them\n"
- "explode. It is a true multiplayer game; you cannot play this alone. You can\n"
- "play with up to four players simultaneously. It has network support."
- msgstr ""
- #: gnu/packages/games.scm:9342
- msgid "Turn-based artillery game featuring fighting hedgehogs"
- msgstr ""
- #: gnu/packages/games.scm:9344
- msgid ""
- "Hedgewars is a turn based strategy, artillery, action and comedy game,\n"
- "featuring the antics of pink hedgehogs with attitude as they battle from the\n"
- "depths of hell to the depths of space.\n"
- "\n"
- "As commander, it's your job to assemble your crack team of hedgehog soldiers\n"
- "and bring the war to your enemy."
- msgstr ""
- #: gnu/packages/games.scm:9377
- msgid "Cross-platform grid-based UI and game framework"
- msgstr ""
- #: gnu/packages/games.scm:9378
- msgid ""
- "The gruid module provides packages for easily building\n"
- "grid-based applications in Go. The library abstracts rendering and input for\n"
- "different platforms. There are drivers available for terminal apps, native\n"
- "graphical apps and browser apps. The original application for the library was\n"
- "creating grid-based games, but it's also well suited for any grid-based\n"
- "application."
- msgstr ""
- #: gnu/packages/games.scm:9407
- msgid "Gruid driver using the tcell library"
- msgstr ""
- #: gnu/packages/games.scm:9408
- msgid ""
- "The gruid-tcell module provides a Gruid driver for building\n"
- "terminal full-window applications."
- msgstr ""
- #: gnu/packages/games.scm:9434
- msgid "Stealth coffee-break roguelike game"
- msgstr ""
- #: gnu/packages/games.scm:9435
- msgid ""
- "Harmonist: Dayoriah Clan Infiltration is a stealth\n"
- "coffee-break roguelike game. The game has a heavy focus on tactical\n"
- "positioning, light and noise mechanisms, making use of various terrain types\n"
- "and cones of view for monsters. Aiming for a replayable streamlined experience,\n"
- "the game avoids complex inventory management and character building, relying\n"
- "on items and player adaptability for character progression."
- msgstr ""
- #: gnu/packages/games.scm:9543 gnu/packages/games.scm:9719
- msgid "Classic 2D point and click adventure game"
- msgstr ""
- #: gnu/packages/games.scm:9544
- msgid ""
- "Drascula: The Vampire Strikes Back is a classic humorous 2D\n"
- "point and click adventure game.\n"
- "\n"
- "In Drascula you play the role of John Hacker, a British estate agent, that\n"
- "gets to meet a gorgeous blond girl who is kidnapped by the notorious vampire\n"
- "Count Drascula and embark on a fun yet dangerous quest to rescue her.\n"
- "Unfortunately, Hacker is not aware of Drascula's real ambitions: DOMINATING\n"
- "the World and demonstrating that he is even more evil than his brother Vlad."
- msgstr ""
- #: gnu/packages/games.scm:9622
- msgid "2D point and click fantasy adventure game"
- msgstr ""
- #: gnu/packages/games.scm:9624
- msgid ""
- "Lure of the Temptress is a classic 2D point and click adventure game.\n"
- "\n"
- "You are Diermot, an unwilling hero who'd prefer a quiet life, and are, to all\n"
- "intents and purposes, a good man. After decades of unrest the King has united\n"
- "the warring factions in his kingdom and all his lands are at peace, except\n"
- "a remote region around a town called Turnvale. A revolt has recently taken\n"
- "place in Turnvale, a revolt orchestrated by an apprentice sorceress called\n"
- "Selena, the titular temptress. The king calls together his finest horsemen\n"
- "and heads off (with you in tow) to Turnvale just to witness how hellish\n"
- "mercenary monsters called Skorl are invading the town.\n"
- "\n"
- "The king's men are defeated, the king is killed and you fall of your horse and\n"
- "bang your head heavily on the ground. You have been *unconscious for a while\n"
- "when you realize that you are in a dingy cell guarded by a not so friendly\n"
- "Skorl. Maybe it would be an idea to try and escape..."
- msgstr ""
- #: gnu/packages/games.scm:9720
- msgid ""
- "Flight of the Amazon Queen is a 2D point-and-click\n"
- "adventure game set in the 1940s.\n"
- "\n"
- "You assume the role of Joe King, a pilot for hire who is given the job\n"
- "of flying Faye Russell (a famous movie star) into the Amazon jungle\n"
- "for a photo shoot. Of course, things never go according to plans.\n"
- "After an unfortunate turn of events they find themselves stranded in\n"
- "the heart of the Amazon jungle, where Joe will embark on a quest to\n"
- "rescue a kidnapped princess and in the process, discover the true\n"
- "sinister intentions of a suspiciously located Lederhosen company. In\n"
- "a rich 2D environment, Joe will cross paths with a variety of unlikely\n"
- "jungle inhabitants including, but not limited to, a tribe of Amazon\n"
- "women and 6-foot-tall pygmies."
- msgstr ""
- #: gnu/packages/games.scm:9818
- msgid "Classic 2D point and click science-fiction adventure game"
- msgstr ""
- #: gnu/packages/games.scm:9820
- msgid ""
- "Beneath a Steel Sky is a science-fiction thriller set in a bleak\n"
- "post-apocalyptic vision of the future. It revolves around Union City,\n"
- "where selfishness, rivalry, and corruption by its citizens seems to be\n"
- "all too common, those who can afford it live underground, away from\n"
- "the pollution and social problems which are plaguing the city.\n"
- "\n"
- "You take on the role of Robert Foster, an outcast of sorts from the\n"
- "city since a boy who was raised in a remote environment outside of\n"
- "Union City simply termed ``the gap''. Robert's mother took him away\n"
- "from Union City as a child on their way to ``Hobart'' but the\n"
- "helicopter crashed on its way. Unfortunately, Robert's mother died,\n"
- "but he survived and was left to be raised by a local tribe from the\n"
- "gap.\n"
- "\n"
- "Years later, Union City security drops by and abducts Robert, killing\n"
- "his tribe in the process; upon reaching the city the helicopter taking\n"
- "him there crashes with him escaping, high upon a tower block in the\n"
- "middle of the city. He sets out to discover the truth about his past,\n"
- "and to seek vengeance for the killing of his tribe."
- msgstr ""
- #: gnu/packages/games.scm:9877
- msgid "Program a little robot and watch it explore a world"
- msgstr ""
- #: gnu/packages/games.scm:9879
- msgid ""
- "GNU Robots is a game in which you program a robot to explore a world\n"
- "full of enemies that can hurt it, obstacles and food to be eaten. The goal of\n"
- "the game is to stay alive and collect prizes. The robot program conveniently\n"
- "may be written in a plain text file in the Scheme programming language."
- msgstr ""
- #: gnu/packages/games.scm:9948
- msgid "Toy train simulation game"
- msgstr ""
- #: gnu/packages/games.scm:9949
- msgid ""
- "Ri-li is a game in which you drive a wooden toy\n"
- "steam locomotive across many levels and collect all the coaches to\n"
- "win."
- msgstr ""
- #: gnu/packages/games.scm:10003
- msgid "Turn-based space empire and galactic conquest computer game"
- msgstr ""
- #: gnu/packages/games.scm:10005
- msgid ""
- "FreeOrion is a turn-based space empire and galactic conquest (4X)\n"
- "computer game being designed and built by the FreeOrion project. Control an\n"
- "empire with the goal of exploring the galaxy, expanding your territory,\n"
- "exploiting the resources, and exterminating rival alien empires. FreeOrion is\n"
- "inspired by the tradition of the Master of Orion games, but is not a clone or\n"
- "remake of that series or any other game."
- msgstr ""
- #: gnu/packages/games.scm:10059
- msgid "Program playing the game of Go"
- msgstr ""
- #: gnu/packages/games.scm:10061
- msgid ""
- "Leela-zero is a Go engine with no human-provided knowledge, modeled after\n"
- "the AlphaGo Zero paper. The current best network weights file for the engine\n"
- "can be downloaded from @url{https://zero.sjeng.org/best-network}."
- msgstr ""
- #: gnu/packages/games.scm:10137
- msgid "Qt GUI to play the game of Go"
- msgstr ""
- #: gnu/packages/games.scm:10139
- msgid ""
- "This a tool for Go players which performs the following functions:\n"
- "@itemize\n"
- "@item SGF editor,\n"
- "@item Analysis frontend for Leela Zero (or compatible engines),\n"
- "@item GTP interface (to play against an engine),\n"
- "@item IGS client (to play on the internet),\n"
- "@item Export games to a variety of formats.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/games.scm:10231
- msgid "2D motocross platform game"
- msgstr ""
- #: gnu/packages/games.scm:10233
- msgid ""
- "X-Moto is a challenging 2D motocross platform game, where\n"
- "physics play an all important role in the gameplay. You need to\n"
- "control your bike to its limit, if you want to have a chance finishing\n"
- "the more difficult challenges."
- msgstr ""
- #: gnu/packages/games.scm:10276
- msgid "Graphical user interface to play chess"
- msgstr "체스를 하는 그래픽 사용자 연결장치"
- #: gnu/packages/games.scm:10278
- msgid ""
- "Eboard is a chess board interface for ICS (Internet Chess Servers)\n"
- "and chess engines."
- msgstr ""
- #: gnu/packages/games.scm:10329
- msgid "Chess game database"
- msgstr ""
- #: gnu/packages/games.scm:10331
- msgid ""
- "ChessX is a chess database. With ChessX you can operate on your\n"
- "collection of chess games in many ways: browse, edit, add, organize, analyze,\n"
- "etc. You can also play games on FICS or against an engine."
- msgstr ""
- #: gnu/packages/games.scm:10397
- msgid "Strong chess engine"
- msgstr ""
- #: gnu/packages/games.scm:10399
- msgid ""
- "Stockfish is a very strong chess engine. It is much stronger than the\n"
- "best human chess grandmasters. It can be used with UCI-compatible GUIs like\n"
- "ChessX."
- msgstr ""
- #: gnu/packages/games.scm:10426
- msgid "Violent point-and-click shooting game with nice effects"
- msgstr ""
- #: gnu/packages/games.scm:10428
- msgid ""
- "Barrage is a rather destructive action game that puts you on a shooting\n"
- "range with the objective to hit as many dummy targets as possible within\n"
- "3 minutes. You control a gun that may either fire small or large grenades at\n"
- "soldiers, jeeps and tanks. The gameplay is simple but it is not that easy to\n"
- "get high scores."
- msgstr ""
- #: gnu/packages/games.scm:10452
- msgid "Avoid evil foodstuffs and make burgers"
- msgstr ""
- #: gnu/packages/games.scm:10454
- msgid ""
- "This is a clone of the classic game BurgerTime. In it, you play\n"
- "the part of a chef who must create burgers by stepping repeatedly on\n"
- "the ingredients until they fall into place. And to make things more\n"
- "complicated, you also must avoid evil animate food items while\n"
- "performing this task, with nothing but your trusty pepper shaker to\n"
- "protect you."
- msgstr ""
- #: gnu/packages/games.scm:10480
- msgid "Seven Kingdoms Ancient Adversaries: real-time strategy game"
- msgstr ""
- #: gnu/packages/games.scm:10482
- msgid ""
- "Seven Kingdoms, designed by Trevor Chan, brings a blend of Real-Time\n"
- "Strategy with the addition of trade, diplomacy, and espionage. The game\n"
- "enables players to compete against up to six other kingdoms allowing players\n"
- "to conquer opponents by defeating them in war (with troops or machines),\n"
- "capturing their buildings with spies, or offering opponents money for their\n"
- "kingdom."
- msgstr ""
- #: gnu/packages/games.scm:10596
- msgid "3D floor-tilting game"
- msgstr ""
- #: gnu/packages/games.scm:10598
- msgid ""
- "In the grand tradition of Marble Madness and Super Monkey Ball,\n"
- "Neverball has you guide a rolling ball through dangerous territory. Balance\n"
- "on narrow bridges, navigate mazes, ride moving platforms, and dodge pushers\n"
- "and shovers to get to the goal. Race against the clock to collect coins to\n"
- "earn extra balls. Also included is Neverputt, which is a 3D miniature golf\n"
- "game."
- msgstr ""
- #: gnu/packages/games.scm:10667
- msgid "Texas holdem poker game"
- msgstr ""
- #: gnu/packages/games.scm:10669
- msgid ""
- "With PokerTH you can play the Texas holdem poker game, either against\n"
- "computer opponents or against real players online."
- msgstr ""
- #: gnu/packages/games.scm:10738
- msgid "X11/Motif blackjack game"
- msgstr ""
- #: gnu/packages/games.scm:10740
- msgid ""
- "Xblackjack is a MOTIF/OLIT based tool constructed to get you ready for\n"
- "the casino. It was inspired by a book called \"Beat the Dealer\" by Edward\n"
- "O. Thorp, Ph.D. of UCLA. A number of important statistics are maintained\n"
- "for display, and used by the program to implement Thorp's \"Complete Point\n"
- "System\" (high-low system)."
- msgstr ""
- #: gnu/packages/games.scm:10778
- msgid "Metroidvania game with vector graphics"
- msgstr ""
- #: gnu/packages/games.scm:10780
- msgid ""
- "Pilot your ship inside a planet to find and rescue the colonists trapped\n"
- "inside the Zenith Colony."
- msgstr ""
- #: gnu/packages/games.scm:10799
- msgid "Go client for X11"
- msgstr ""
- #: gnu/packages/games.scm:10800
- msgid ""
- "Provides a large set of Go-related services for X11:\n"
- "@itemize\n"
- "@item Local games with precise implementation of the Chinese and Japanese rulesets\n"
- "@item Edition and visualization of SGF files\n"
- "@item Connection to the NNGS or IGS Go servers\n"
- "@item Bridge to Go modem protocol, allowing to play against Go modem-capable AIs\n"
- "such as GnuGo.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/games.scm:10859
- msgid "Memento mori game"
- msgstr ""
- #: gnu/packages/games.scm:10861
- msgid ""
- "Passage is meant to be a memento mori game. It presents an entire life,\n"
- "from young adulthood through old age and death, in the span of five minutes.\n"
- "Of course, it's a game, not a painting or a film, so the choices that you make\n"
- "as the player are crucial. There's no ``right'' way to play Passage, just as\n"
- "there's no right way to interpret it."
- msgstr ""
- #: gnu/packages/games.scm:10894
- msgid "High performance X11 animated wallpaper setter"
- msgstr ""
- #: gnu/packages/games.scm:10895
- msgid ""
- "High performance animated desktop background setter for\n"
- "X11 that won't set your CPU on fire, drain your laptop battery, or lower video\n"
- "game FPS."
- msgstr ""
- #: gnu/packages/games.scm:10924
- msgid "Fast-paced action strategy game"
- msgstr ""
- #: gnu/packages/games.scm:10925
- msgid ""
- "Curse of War is a fast-paced action strategy game originally\n"
- "implemented using ncurses user interface. An SDL graphical version is also\n"
- "available."
- msgstr ""
- #: gnu/packages/games.scm:10954
- msgid "Pixelart survival game"
- msgstr ""
- #: gnu/packages/games.scm:10956
- msgid ""
- "Schiffbruch is a mix of building, strategy and adventure and gets played\n"
- "with a two-dimensional view. The game deals with the consequences of a ship\n"
- "wreckage. You're stranded on a desert island and have to survive. In order to\n"
- "do so you need to explore the island, find food, build a shelter and try to\n"
- "get attention, so you get found."
- msgstr ""
- #: gnu/packages/games.scm:11015
- msgid "Port of Prince of Persia game"
- msgstr ""
- #: gnu/packages/games.scm:11016
- msgid ""
- "This package provides port of Prince of Persia, based on the\n"
- "disassembly of the DOS version, extended with new features."
- msgstr ""
- #: gnu/packages/games.scm:11046
- msgid "Turn-based strategy game engine"
- msgstr ""
- #: gnu/packages/games.scm:11047
- #, scheme-format
- msgid ""
- "@code{fheroes2} is an implementation of Heroes of Might and\n"
- "Magic II (aka HOMM2) game engine. It requires assets and game resources to\n"
- "play; it will look for them at @file{~/.local/share/fheroes2} folder."
- msgstr ""
- #: gnu/packages/games.scm:11071
- msgid "Arcade airplane game"
- msgstr ""
- #: gnu/packages/games.scm:11072
- msgid ""
- "@code{apricots} is a game where you fly a little plane\n"
- "around the screen and shoot things and drop bombs on enemy targets. It's\n"
- "meant to be quick and fun."
- msgstr ""
- #: gnu/packages/games.scm:11110
- msgid "Liquid War 6 is a unique multiplayer wargame"
- msgstr ""
- #: gnu/packages/games.scm:11112
- msgid ""
- "Liquid War 6 is a unique multiplayer war game. Your army is a blob of\n"
- "liquid and you have to try and eat your opponents. Rules are very simple yet\n"
- "original, they have been invented by Thomas Colcombet."
- msgstr ""
- #: gnu/packages/games.scm:11137
- msgid "Theme park management simulation game"
- msgstr ""
- #: gnu/packages/games.scm:11139
- msgid ""
- "FreeRCT is a game that captures the look and feel of the popular games\n"
- "RollerCoaster Tycoon 1 and 2, graphics- and gameplay-wise.\n"
- "\n"
- "In this game, you play as a manager of a theme park, allowing you to make a\n"
- "park of your dreams. The list of responsibilities includes managing staff,\n"
- "finances, landscaping, and most importantly: rides. Good managers follow the\n"
- "principle of prioritizing the guests' happiness with a well-maintained park.\n"
- "Should they go unwise, a theme park plunge into chaos with vandalizing guests\n"
- "and unsafe rides. Which path will you take?"
- msgstr ""
- #: gnu/packages/games.scm:11233
- msgid "Karaoke game"
- msgstr ""
- #: gnu/packages/games.scm:11235
- msgid ""
- "UltraStar Deluxe (USDX) is a karaoke game. It allows up to six players\n"
- "to sing along with music using microphones in order to score points, depending\n"
- "on the pitch of the voice and the rhythm of singing."
- msgstr ""
- #: gnu/packages/games.scm:11271
- msgid "udev rules for game controllers and virtual reality devices"
- msgstr ""
- #: gnu/packages/games.scm:11273
- msgid ""
- "This package provides a set of udev rules for game controllers and\n"
- "virtual reality devices."
- msgstr ""
- #: gnu/packages/gcc.scm:373
- msgid "GNU Compiler Collection"
- msgstr ""
- #: gnu/packages/gcc.scm:375
- msgid ""
- "GCC is the GNU Compiler Collection. It provides compiler front-ends\n"
- "for several languages, including C, C++, Objective-C, Fortran, Java, Ada, and\n"
- "Go. It also includes runtime support libraries for these languages."
- msgstr ""
- #: gnu/packages/gcc.scm:615
- msgid ""
- "GCC is the GNU Compiler Collection. It provides compiler front-ends\n"
- "for several languages, including C, C++, Objective-C, Fortran, Ada, and Go.\n"
- "It also includes runtime support libraries for these languages."
- msgstr ""
- #: gnu/packages/gcc.scm:851
- msgid "GNU C++ standard library"
- msgstr ""
- #: gnu/packages/gcc.scm:876
- msgid "Headers of GNU libstdc++"
- msgstr ""
- #: gnu/packages/gcc.scm:905
- msgid "Collection of subroutines used by various GNU programs"
- msgstr ""
- #: gnu/packages/gcc.scm:1015
- msgid "GCC library generating machine code on-the-fly at runtime"
- msgstr ""
- #: gnu/packages/gcc.scm:1017
- msgid ""
- "This package is part of the GNU Compiler Collection and provides an\n"
- "embeddable library for generating machine code on-the-fly at runtime. This\n"
- "shared library can then be dynamically-linked into bytecode interpreters and\n"
- "other such programs that want to generate machine code on-the-fly at run-time.\n"
- "It can also be used for ahead-of-time code generation for building standalone\n"
- "compilers. The just-in-time (jit) part of the name is now something of a\n"
- "misnomer."
- msgstr ""
- #: gnu/packages/gcc.scm:1037 gnu/packages/gcc.scm:1076
- msgid "Go frontend to GCC"
- msgstr ""
- #: gnu/packages/gcc.scm:1039 gnu/packages/gcc.scm:1078
- msgid ""
- "This package is part of the GNU Compiler Collection and\n"
- "provides the GNU compiler for the Go programming language."
- msgstr ""
- #: gnu/packages/gcc.scm:1202
- msgid "GNU libstdc++ documentation"
- msgstr ""
- #: gnu/packages/gcc.scm:1288
- msgid "Manipulating sets and relations of integer points bounded by linear constraints"
- msgstr ""
- #: gnu/packages/gcc.scm:1291
- msgid ""
- "isl is a library for manipulating sets and relations of integer points\n"
- "bounded by linear constraints. Supported operations on sets include\n"
- "intersection, union, set difference, emptiness check, convex hull, (integer)\n"
- "affine hull, integer projection, computing the lexicographic minimum using\n"
- "parametric integer programming, coalescing and parametric vertex\n"
- "enumeration. It also includes an ILP solver based on generalized basis\n"
- "reduction, transitive closures on maps (which may encode infinite graphs),\n"
- "dependence analysis and bounds on piecewise step-polynomials."
- msgstr ""
- #: gnu/packages/gcc.scm:1352
- msgid "Library to generate code for scanning Z-polyhedra"
- msgstr ""
- #: gnu/packages/gcc.scm:1354
- msgid ""
- "CLooG is a free software library to generate code for scanning\n"
- "Z-polyhedra. That is, it finds a code (e.g., in C, FORTRAN...) that\n"
- "reaches each integral point of one or more parameterized polyhedra.\n"
- "CLooG has been originally written to solve the code generation problem\n"
- "for optimizing compilers based on the polytope model. Nevertheless it\n"
- "is used now in various area e.g., to build control automata for\n"
- "high-level synthesis or to find the best polynomial approximation of a\n"
- "function. CLooG may help in any situation where scanning polyhedra\n"
- "matters. While the user has full control on generated code quality,\n"
- "CLooG is designed to avoid control overhead and to produce a very\n"
- "effective code."
- msgstr ""
- #: gnu/packages/gcc.scm:1408
- msgid "Reference manual for the C programming language"
- msgstr ""
- #: gnu/packages/gcc.scm:1410
- msgid ""
- "This is a reference manual for the C programming language, as\n"
- "implemented by the GNU C Compiler (gcc). As a reference, it is not intended\n"
- "to be a tutorial of the language. Rather, it outlines all of the constructs\n"
- "of the language. Library functions are not included."
- msgstr ""
- #: gnu/packages/gettext.scm:141
- msgid "Tools and documentation for translation (used to build other packages)"
- msgstr ""
- #: gnu/packages/gettext.scm:143
- msgid ""
- "GNU Gettext is a package providing a framework for translating the\n"
- "textual output of programs into multiple languages. It provides translators\n"
- "with the means to create message catalogs, and a runtime library to load\n"
- "translated messages from the catalogs. Nearly all GNU packages use Gettext."
- msgstr ""
- #: gnu/packages/gettext.scm:174
- msgid "Tools and documentation for translation"
- msgstr ""
- #: gnu/packages/gettext.scm:199
- msgid "Text styling library"
- msgstr ""
- #: gnu/packages/gettext.scm:201
- msgid ""
- "GNU libtextstyle is a C library that provides an easy way to add styling\n"
- "to programs that produce output to a console or terminal emulator window. It\n"
- "allows applications to emit text annotated with styling information, such as\n"
- "color, font attributes (weight, posture), or underlining."
- msgstr ""
- #: gnu/packages/gettext.scm:235
- msgid "Markdown file translation utilities using pofiles"
- msgstr ""
- #: gnu/packages/gettext.scm:237
- msgid ""
- "The mdpo utility creates pofiles, the format stabilished by GNU Gettext,\n"
- "from Markdown files."
- msgstr ""
- #: gnu/packages/gettext.scm:317
- msgid "Scripts to ease maintenance of translations"
- msgstr ""
- #: gnu/packages/gettext.scm:319
- msgid ""
- "The po4a (PO for anything) project goal is to ease translations (and\n"
- "more interestingly, the maintenance of translations) using gettext tools on\n"
- "areas where they were not expected like documentation."
- msgstr ""
- #: gnu/packages/gimp.scm:136
- msgid "2D constrained Delaunay triangulation library"
- msgstr ""
- #: gnu/packages/gimp.scm:137
- msgid ""
- "Poly2Tri-C is a library for generating, refining and rendering\n"
- "2-Dimensional Constrained Delaunay Triangulations."
- msgstr ""
- #: gnu/packages/gimp.scm:168
- msgid "Microraptor GUI"
- msgstr ""
- #: gnu/packages/gimp.scm:169
- msgid ""
- "MrG is is a C API for creating user interfaces. It can be\n"
- "used as an application writing environment or as an interactive canvas for part\n"
- "of a larger interface."
- msgstr ""
- #: gnu/packages/gimp.scm:204
- msgid "Image pixel format conversion library"
- msgstr ""
- #: gnu/packages/gimp.scm:206
- msgid ""
- "Babl is a dynamic, any-to-any pixel format translation library.\n"
- "It allows converting between different methods of storing pixels, known as\n"
- "@dfn{pixel formats}, that have different bit depths and other data\n"
- "representations, color models, and component permutations.\n"
- "\n"
- "A vocabulary to formulate new pixel formats from existing primitives is\n"
- "provided, as well as a framework to add new color models and data types."
- msgstr ""
- #: gnu/packages/gimp.scm:280
- msgid "Graph based image processing framework"
- msgstr ""
- #: gnu/packages/gimp.scm:281
- msgid ""
- "GEGL (Generic Graphics Library) provides infrastructure to\n"
- "do demand based cached non destructive image editing on larger than RAM\n"
- "buffers."
- msgstr ""
- #: gnu/packages/gimp.scm:365
- msgid "GNU Image Manipulation Program"
- msgstr ""
- #: gnu/packages/gimp.scm:367
- msgid ""
- "GIMP is an application for image manipulation tasks such as photo\n"
- "retouching, composition and authoring. It supports all common image formats\n"
- "as well as specialized ones. It features a highly customizable interface\n"
- "that is extensible via a plugin system."
- msgstr ""
- #: gnu/packages/gimp.scm:427
- msgid "GIMP plug-in to edit image in fourier space"
- msgstr ""
- #: gnu/packages/gimp.scm:429
- msgid ""
- "This package provides a simple plug-in to apply the fourier transform on\n"
- "an image, allowing you to work with the transformed image inside GIMP. You\n"
- "can draw or apply filters in fourier space and get the modified image with an\n"
- "inverse fourier transform."
- msgstr ""
- #: gnu/packages/gimp.scm:455
- msgid "Artistic brushes library"
- msgstr ""
- #: gnu/packages/gimp.scm:456
- msgid ""
- "Libmypaint, also called \"brushlib\", is a library for making\n"
- "brushstrokes which is used by MyPaint and GIMP."
- msgstr ""
- #: gnu/packages/gimp.scm:477
- msgid "Default brushes for MyPaint"
- msgstr ""
- #: gnu/packages/gimp.scm:478
- msgid ""
- "This package provides the default set of brushes for\n"
- "MyPaint."
- msgstr ""
- #: gnu/packages/gimp.scm:559
- msgid "GIMP plugins for texture synthesis"
- msgstr ""
- #: gnu/packages/gimp.scm:561
- msgid ""
- "This package provides resynthesizer plugins for GIMP, which encompasses\n"
- "tools for healing selections (content-aware fill), enlarging the canvas and\n"
- "healing the border, increasing the resolution while adding detail, and\n"
- "transferring the style of an image."
- msgstr ""
- #: gnu/packages/gnome.scm:294
- msgid "UPnP IGD for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:295
- msgid "GUPnP-IGD is a library to handle UPnP IGD port mapping."
- msgstr ""
- #: gnu/packages/gnome.scm:349
- msgid "CD/DVD burning tool for Gnome"
- msgstr ""
- #: gnu/packages/gnome.scm:350
- msgid ""
- "Brasero is an application to burn CD/DVD for the Gnome\n"
- "Desktop. It is designed to be as simple as possible and has some unique\n"
- "features to enable users to create their discs easily and quickly."
- msgstr ""
- #: gnu/packages/gnome.scm:381
- msgid "Cloudproviders Integration API"
- msgstr ""
- #: gnu/packages/gnome.scm:382
- msgid ""
- "Libcloudproviders is a DBus API that allows cloud storage sync\n"
- "clients to expose their services. Clients such as file managers and desktop\n"
- "environments can then provide integrated access to the cloud providers\n"
- "services."
- msgstr ""
- #: gnu/packages/gnome.scm:453
- msgid "Glib library for feeds"
- msgstr ""
- #: gnu/packages/gnome.scm:454
- msgid ""
- "LibGRSS is a Glib abstraction to handle feeds in RSS, Atom,\n"
- "and other formats."
- msgstr ""
- #: gnu/packages/gnome.scm:481
- msgid "Common JS Modules"
- msgstr ""
- #: gnu/packages/gnome.scm:482
- msgid ""
- "GNOME-JS-Common provides common modules for GNOME JavaScript\n"
- "bindings."
- msgstr ""
- #: gnu/packages/gnome.scm:564
- msgid "GObject JavaScriptCore bridge"
- msgstr ""
- #: gnu/packages/gnome.scm:565
- msgid ""
- "Seed is a library and interpreter, dynamically bridging\n"
- "(through GObjectIntrospection) the WebKit JavaScriptCore engine, with the\n"
- "GNOME platform. It serves as something which enables you to write standalone\n"
- "applications in JavaScript, or easily enable your application to be extensible\n"
- "in JavaScript."
- msgstr ""
- #: gnu/packages/gnome.scm:620
- msgid "Media management library"
- msgstr ""
- #: gnu/packages/gnome.scm:621
- msgid ""
- "Libdmapsharing is a library which allows programs to access,\n"
- "share and control the playback of media content using DMAP (DAAP, DPAP & DACP).\n"
- "It is written in C using GObject and libsoup."
- msgstr ""
- #: gnu/packages/gnome.scm:653
- msgid "GLib Testing Framework"
- msgstr ""
- #: gnu/packages/gnome.scm:654
- msgid ""
- "GTX is a small collection of convenience functions intended to\n"
- "enhance the GLib testing framework. With specific emphasis on easing the pain\n"
- "of writing test cases for asynchronous interactions."
- msgstr ""
- #: gnu/packages/gnome.scm:727
- msgid "Model to synchronize multiple instances over DBus"
- msgstr ""
- #: gnu/packages/gnome.scm:728
- msgid ""
- "Dee is a library that uses DBus to provide objects allowing\n"
- "you to create Model-View-Controller type programs across DBus. It also consists\n"
- "of utility objects which extend DBus allowing for peer-to-peer discoverability\n"
- "of known objects without needing a central registrar."
- msgstr ""
- #: gnu/packages/gnome.scm:804
- msgid "Desktop Activity Logging"
- msgstr ""
- #: gnu/packages/gnome.scm:805
- msgid ""
- "Zeitgeist is a service which logs the users’s activities and\n"
- "events, anywhere from files opened to websites visited and conversations. It\n"
- "makes this information readily available for other applications to use. It is\n"
- "able to establish relationships between items based on similarity and usage\n"
- "patterns."
- msgstr ""
- #: gnu/packages/gnome.scm:869
- msgid "Discover recipes for preparing food"
- msgstr ""
- #: gnu/packages/gnome.scm:870
- msgid ""
- "GNOME Recipes helps you discover what to cook today,\n"
- "tomorrow, the rest of the week and for special occasions."
- msgstr ""
- #: gnu/packages/gnome.scm:941
- msgid "Access, organize and share your photos on GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:942
- msgid ""
- "GNOME Photos is a simple and elegant replacement for using a\n"
- "file manager to deal with photos. Enhance, crop and edit in a snap. Seamless\n"
- "cloud integration is offered through GNOME Online Accounts."
- msgstr ""
- #: gnu/packages/gnome.scm:1016
- msgid "Simple music player for GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:1017
- msgid ""
- "GNOME Music is the new GNOME music playing application that\n"
- "aims to combine an elegant and immersive browsing experience with simple\n"
- "and straightforward controls."
- msgstr ""
- #: gnu/packages/gnome.scm:1037
- msgid "External Data Representation Library"
- msgstr ""
- #: gnu/packages/gnome.scm:1038
- msgid ""
- "PortableXDR is an implementation of External Data\n"
- "Representation (XDR) Library. It is a standard data serialization format, for\n"
- "uses such as computer network protocols. It allows data to be transferred\n"
- "between different kinds of computer systems."
- msgstr ""
- #: gnu/packages/gnome.scm:1092
- msgid "Text editor product line"
- msgstr ""
- #: gnu/packages/gnome.scm:1093
- msgid ""
- "Tepl is a library that eases the development of\n"
- "GtkSourceView-based text editors and IDEs."
- msgstr ""
- #: gnu/packages/gnome.scm:1117
- msgid "Popup dialogs for Kerberos 5"
- msgstr ""
- #: gnu/packages/gnome.scm:1118
- msgid ""
- "krb5-auth-dialog is a simple dialog that monitors Kerberos\n"
- "tickets, and pops up a dialog when they are about to expire."
- msgstr ""
- #: gnu/packages/gnome.scm:1142
- msgid "Notification Daemon for GNOME Desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:1143
- msgid ""
- "Notification-Daemon is the server implementation of the\n"
- "freedesktop.org desktop notification specification."
- msgstr ""
- #: gnu/packages/gnome.scm:1191
- msgid "Simple compositing window manager"
- msgstr ""
- #: gnu/packages/gnome.scm:1192
- msgid ""
- "Metacity is a window manager with a focus on simplicity and\n"
- "usability rather than novelties or gimmicks. Its author has characterized it\n"
- "as a \"boring window manager for the adult in you.\""
- msgstr ""
- #: gnu/packages/gnome.scm:1227
- msgid "Module of GNOME C++ bindings"
- msgstr ""
- #: gnu/packages/gnome.scm:1228
- msgid ""
- "The mm-common module provides the build infrastructure\n"
- "and utilities shared among the GNOME C++ binding libraries. Release\n"
- "archives of mm-common include the Doxygen tag file for the GNU C++\n"
- "Library reference documentation."
- msgstr ""
- #: gnu/packages/gnome.scm:1277
- msgid "WebDav server implementation using libsoup"
- msgstr ""
- #: gnu/packages/gnome.scm:1278
- msgid ""
- "PhoDav was initially developed as a file-sharing mechanism for Spice,\n"
- "but it is generic enough to be reused in other projects,\n"
- "in particular in the GNOME desktop."
- msgstr ""
- #: gnu/packages/gnome.scm:1330
- msgid "Color profile manager for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:1331
- msgid ""
- "GNOME Color Manager is a session framework that makes\n"
- "it easy to manage, install and generate color profiles\n"
- "in the GNOME desktop."
- msgstr ""
- #: gnu/packages/gnome.scm:1381
- msgid "Web Crawlers for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:1382
- msgid ""
- "GNOME Online Miners provides a set of crawlers that\n"
- "go through your online content and index them locally in Tracker.\n"
- "It has miners for Facebook, Flickr, Google, ownCloud and SkyDrive."
- msgstr ""
- #: gnu/packages/gnome.scm:1413
- msgid ""
- "GObject-based API over @acronym{SSDP, Simple Service Discovery\n"
- "Protocol} for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:1415
- msgid ""
- "This package provides a library to handle resource discovery\n"
- "and announcement over @acronym{SSDP, Simple Service Discovery Protocol} and\n"
- "a debugging tool, @command{gssdp-device-sniffer}."
- msgstr ""
- #: gnu/packages/gnome.scm:1471
- msgid "PnP API for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:1472
- msgid ""
- "This package provides GUPnP, an object-oriented framework\n"
- "for creating UPnP devices and control points, written in C using\n"
- "@code{GObject} and @code{libsoup}."
- msgstr ""
- #: gnu/packages/gnome.scm:1520
- msgid "GUPnP DLNA for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:1521
- msgid ""
- "This package provides a small utility library to\n"
- "support DLNA-related tasks such as media profile guessing, transcoding to a\n"
- "given profile, etc. DLNA is a subset of UPnP A/V."
- msgstr ""
- #: gnu/packages/gnome.scm:1550
- msgid "GUPnP A/V for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:1551
- msgid ""
- "This package provides a small library for handling\n"
- "and implementation of UPnP A/V profiles."
- msgstr ""
- #: gnu/packages/gnome.scm:1577
- msgid "Media art library for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:1579
- msgid ""
- "The libmediaart library is the foundation for media art caching,\n"
- "extraction, and lookup for applications on the desktop."
- msgstr ""
- #: gnu/packages/gnome.scm:1641
- msgid "Initial setup wizard for GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:1642
- msgid ""
- "This package provides a set-up wizard when a\n"
- "user logs into GNOME for the first time. It typically provides a\n"
- "tour of all gnome components and allows the user to set them up."
- msgstr ""
- #: gnu/packages/gnome.scm:1682
- msgid "File sharing for GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:1683
- msgid ""
- "GNOME User Share is a small package that binds together\n"
- "various free software projects to bring easy to use user-level file\n"
- "sharing to the masses."
- msgstr ""
- #: gnu/packages/gnome.scm:1738
- msgid "File previewer for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:1739
- msgid ""
- "Sushi is a DBus-activated service that allows applications\n"
- "to preview files on the GNOME desktop."
- msgstr ""
- #: gnu/packages/gnome.scm:1790
- msgid "Share audio, video, and pictures with other devices"
- msgstr ""
- #: gnu/packages/gnome.scm:1792
- msgid ""
- "Rygel is a home media solution (@dfn{UPnP AV MediaServer and\n"
- "MediaRenderer}) for GNOME that allows you to easily share audio, video, and\n"
- "pictures, and to control a media player on your home network.\n"
- "\n"
- "Rygel achieves interoperability with other devices by trying to conform to the\n"
- "strict requirements of DLNA and by converting media on-the-fly to formats that\n"
- "client devices can handle."
- msgstr ""
- #: gnu/packages/gnome.scm:1847
- msgid "Network Manager's applet library"
- msgstr ""
- #: gnu/packages/gnome.scm:1848
- msgid ""
- "Libnma is an applet library for Network Manager. It was\n"
- "initially part of network-manager-applet and has now become a separate\n"
- "project."
- msgstr ""
- #: gnu/packages/gnome.scm:1871
- msgid "Menu support for GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:1872
- msgid ""
- "GNOME Menus contains the libgnome-menu library, the layout\n"
- "configuration files for the GNOME menu, as well as a simple menu editor."
- msgstr ""
- #: gnu/packages/gnome.scm:1950
- msgid "Simple backup tool, for regular encrypted backups"
- msgstr ""
- #: gnu/packages/gnome.scm:1952
- msgid ""
- "Déjà Dup is a simple backup tool, for regular encrypted backups. It\n"
- "uses duplicity as the backend, which supports incremental backups and storage\n"
- "either on a local, or remote machine via a number of methods."
- msgstr ""
- #: gnu/packages/gnome.scm:1984
- msgid "Two-pane graphical file manager for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:1986
- msgid ""
- "GNOME Commander is a two-pane graphical file manager using GNOME\n"
- "libraries. It aims to fulfill the demands of more advanced users who\n"
- "like to focus on file management, their work through special applications\n"
- "and running smart commands."
- msgstr ""
- #: gnu/packages/gnome.scm:2007
- msgid "User documentation for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:2009
- msgid ""
- "The GNOME User Documentation explains how to use the GNOME desktop and its\n"
- "components. It covers usage and setup of the core GNOME programs by end-users\n"
- "and system administrators."
- msgstr ""
- #: gnu/packages/gnome.scm:2052
- msgid "Diagram creation for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:2053
- msgid ""
- "Dia can be used to draw different types of diagrams, and\n"
- "includes support for UML static structure diagrams (class diagrams), entity\n"
- "relationship modeling, and network diagrams. The program supports various file\n"
- "formats like PNG, SVG, PDF and EPS."
- msgstr ""
- #: gnu/packages/gnome.scm:2096
- msgid "Library for accessing online service APIs"
- msgstr ""
- #: gnu/packages/gnome.scm:2098
- msgid ""
- "libgdata is a GLib-based library for accessing online service APIs using\n"
- "the GData protocol — most notably, Google's services. It provides APIs to\n"
- "access the common Google services, and has full asynchronous support."
- msgstr ""
- #: gnu/packages/gnome.scm:2124
- msgid "GObject-based library for handling and rendering XPS documents"
- msgstr ""
- #: gnu/packages/gnome.scm:2126
- msgid ""
- "libgxps is a GObject-based library for handling and rendering XPS\n"
- "documents. This package also contains binaries that can convert XPS documents\n"
- "to other formats."
- msgstr ""
- #: gnu/packages/gnome.scm:2173
- msgid "Find and insert unusual characters"
- msgstr ""
- #: gnu/packages/gnome.scm:2174
- msgid ""
- "Characters is a simple utility application to find\n"
- "and insert unusual characters. It allows you to quickly find the\n"
- "character you are looking for by searching for keywords."
- msgstr ""
- #: gnu/packages/gnome.scm:2194
- msgid "Bootstrap GNOME modules built from Git"
- msgstr ""
- #: gnu/packages/gnome.scm:2195
- msgid ""
- "gnome-common contains various files needed to bootstrap\n"
- "GNOME modules built from Git. It contains a common \"autogen.sh\" script that\n"
- "can be used to configure a source directory checked out from Git and some\n"
- "commonly used macros."
- msgstr ""
- #: gnu/packages/gnome.scm:2248
- msgid "GNOME's integrated address book"
- msgstr ""
- #: gnu/packages/gnome.scm:2250
- msgid ""
- "GNOME Contacts organizes your contact information from online and\n"
- "offline sources, providing a centralized place for managing your contacts."
- msgstr ""
- #: gnu/packages/gnome.scm:2327
- msgid "Libgnome-desktop, gnome-about, and desktop-wide documents"
- msgstr ""
- #: gnu/packages/gnome.scm:2329
- msgid ""
- "The libgnome-desktop library provides API shared by several applications\n"
- "on the desktop, but that cannot live in the platform for various reasons.\n"
- "There is no API or ABI guarantee, although we are doing our best to provide\n"
- "stability. Documentation for the API is available with gtk-doc.\n"
- "\n"
- "The gnome-about program helps find which version of GNOME is installed."
- msgstr ""
- #: gnu/packages/gnome.scm:2383
- msgid "Disk management utility for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:2384
- msgid "Disk management utility for GNOME."
- msgstr ""
- #: gnu/packages/gnome.scm:2427
- msgid "GNOME Fonts"
- msgstr ""
- #: gnu/packages/gnome.scm:2428
- msgid ""
- "Application to show you the fonts installed on your computer\n"
- "for your use as thumbnails. Selecting any thumbnails shows the full view of how\n"
- "the font would look under various sizes."
- msgstr ""
- #: gnu/packages/gnome.scm:2501
- msgid "Libraries for displaying certificates and accessing key stores"
- msgstr ""
- #: gnu/packages/gnome.scm:2503
- msgid ""
- "The GCR package contains libraries used for displaying certificates and\n"
- "accessing key stores. It also provides the viewer for crypto files on the\n"
- "GNOME Desktop."
- msgstr ""
- #: gnu/packages/gnome.scm:2541
- msgid "GNOME docking library"
- msgstr ""
- #: gnu/packages/gnome.scm:2542
- msgid "This library provides docking features for gtk+."
- msgstr ""
- #: gnu/packages/gnome.scm:2586
- msgid "Accessing passwords from the GNOME keyring"
- msgstr ""
- #: gnu/packages/gnome.scm:2588
- msgid "Client library to access passwords from the GNOME keyring."
- msgstr ""
- #: gnu/packages/gnome.scm:2657
- msgid "Daemon to store passwords and encryption keys"
- msgstr ""
- #: gnu/packages/gnome.scm:2659
- msgid ""
- "@command{gnome-keyring} is a program that keeps passwords and other\n"
- "secrets for users. It is run as a daemon in the session, similar to\n"
- "@command{ssh-agent}, and other applications locate it via an environment\n"
- "variable or D-Bus.\n"
- "\n"
- "The program can manage several keyrings, each with its own master password,\n"
- "and there is also a session keyring which is never stored to disk, but\n"
- "forgotten when the session ends."
- msgstr ""
- #: gnu/packages/gnome.scm:2727
- msgid "GNOME's document viewer"
- msgstr ""
- #: gnu/packages/gnome.scm:2729
- msgid ""
- "Evince is a document viewer for multiple document formats. It\n"
- "currently supports PDF, PostScript, DjVu, TIFF and DVI. The goal\n"
- "of Evince is to replace the multiple document viewers that exist\n"
- "on the GNOME Desktop with a single simple application."
- msgstr ""
- #: gnu/packages/gnome.scm:2769
- msgid "GNOME settings for various desktop components"
- msgstr ""
- #: gnu/packages/gnome.scm:2770
- msgid ""
- "Gsettings-desktop-schemas contains a collection of GSettings\n"
- "schemas for settings shared by various components of the GNOME desktop."
- msgstr ""
- #: gnu/packages/gnome.scm:2814
- msgid "Library to easily handle complex data structures"
- msgstr ""
- #: gnu/packages/gnome.scm:2816
- msgid ""
- "Liblarch is a Python library built to easily handle data structures such\n"
- "as lists, trees and acyclic graphs. There's also a GTK binding that will\n"
- "allow you to use your data structure in a @code{Gtk.Treeview}.\n"
- "\n"
- "Liblarch support multiple views of one data structure and complex filtering.\n"
- "That way, you have a clear separation between your data themselves (Model)\n"
- "and how they are displayed (View)."
- msgstr ""
- #: gnu/packages/gnome.scm:2876
- msgid "Personal organizer for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:2878
- msgid ""
- "Getting Things GNOME! (GTG) is a personal tasks and TODO list items\n"
- "organizer for the GNOME desktop environment inspired by the Getting Things\n"
- "Done (GTD) methodology. GTG is designed with flexibility, adaptability,\n"
- "and ease of use in mind so it can be used as more than just GTD software.\n"
- "GTG is intended to help you track everything you need to do and need to\n"
- "know, from small tasks to large projects."
- msgstr ""
- #: gnu/packages/gnome.scm:2915
- msgid "Utility to implement the Freedesktop Icon Naming Specification"
- msgstr ""
- #: gnu/packages/gnome.scm:2917
- msgid ""
- "To help with the transition to the Freedesktop Icon Naming\n"
- "Specification, the icon naming utility maps the icon names used by the\n"
- "GNOME and KDE desktops to the icon names proposed in the specification."
- msgstr ""
- #: gnu/packages/gnome.scm:2946
- msgid "GNOME icon theme"
- msgstr ""
- #: gnu/packages/gnome.scm:2947
- msgid "Icons for the GNOME desktop."
- msgstr ""
- #: gnu/packages/gnome.scm:2968
- msgid "Tango icon theme"
- msgstr ""
- #: gnu/packages/gnome.scm:2969
- msgid ""
- "This is an icon theme that follows the Tango visual\n"
- "guidelines."
- msgstr ""
- #: gnu/packages/gnome.scm:2997
- msgid "Database of common MIME types"
- msgstr ""
- #: gnu/packages/gnome.scm:2999
- msgid ""
- "The shared-mime-info package contains the core database of common types\n"
- "and the update-mime-database command used to extend it. It requires glib2 to\n"
- "be installed for building the update command. Additionally, it uses intltool\n"
- "for translations, though this is only a dependency for the maintainers. This\n"
- "database is translated at Transifex."
- msgstr ""
- #: gnu/packages/gnome.scm:3087
- msgid "CUPS administration tool"
- msgstr ""
- #: gnu/packages/gnome.scm:3089
- msgid ""
- "system-config-printer is a CUPS administration tool. It's written in\n"
- "Python using GTK+, and uses the @acronym{IPP, Internet Printing Protocol} when\n"
- "configuring CUPS."
- msgstr ""
- #: gnu/packages/gnome.scm:3111
- msgid "Freedesktop icon theme"
- msgstr ""
- #: gnu/packages/gnome.scm:3113
- msgid "Freedesktop icon theme."
- msgstr ""
- #: gnu/packages/gnome.scm:3160
- msgid "GNOME desktop notification library"
- msgstr ""
- #: gnu/packages/gnome.scm:3162
- msgid ""
- "Libnotify is a library that sends desktop notifications to a\n"
- "notification daemon, as defined in the Desktop Notifications spec. These\n"
- "notifications can be used to inform the user about an event or display\n"
- "some form of information without getting in the user's way."
- msgstr ""
- #: gnu/packages/gnome.scm:3210
- msgid "GObject plugin system"
- msgstr ""
- #: gnu/packages/gnome.scm:3212
- msgid ""
- "Libpeas is a gobject-based plugin engine, targeted at giving every\n"
- "application the chance to assume its own extensibility. It also has a set of\n"
- "features including, but not limited to: multiple extension points; on-demand\n"
- "(lazy) programming language support for C, Python and JS; simplicity of the\n"
- "API."
- msgstr ""
- #: gnu/packages/gnome.scm:3247
- msgid "OpenGL extension to GTK+"
- msgstr ""
- #: gnu/packages/gnome.scm:3248
- msgid ""
- "GtkGLExt is an OpenGL extension to GTK+. It provides\n"
- "additional GDK objects which support OpenGL rendering in GTK+ and GtkWidget\n"
- "API add-ons to make GTK+ widgets OpenGL-capable."
- msgstr ""
- #: gnu/packages/gnome.scm:3315
- msgid "GTK+ rapid application development tool"
- msgstr ""
- #: gnu/packages/gnome.scm:3316
- msgid ""
- "Glade is a rapid application development (RAD) tool to\n"
- "enable quick & easy development of user interfaces for the GTK+ toolkit and\n"
- "the GNOME desktop environment."
- msgstr ""
- #: gnu/packages/gnome.scm:3363
- msgid "Template markup language"
- msgstr ""
- #: gnu/packages/gnome.scm:3365
- msgid ""
- "Blueprint is a markup language for GTK user interfaces. Internally, it\n"
- "compiles to GTKBuilder XML."
- msgstr ""
- #: gnu/packages/gnome.scm:3455
- msgid "Rapid application development tool"
- msgstr ""
- #: gnu/packages/gnome.scm:3456
- msgid ""
- "Cambalache is a rapid application development (RAD) tool for\n"
- "Gtk 4 and 3 with a clear model-view-controller (MVC) design and\n"
- "data model first philosophy."
- msgstr ""
- #: gnu/packages/gnome.scm:3481
- msgid "CSS2 parsing and manipulation library"
- msgstr ""
- #: gnu/packages/gnome.scm:3483
- msgid ""
- "Libcroco is a standalone CSS2 parsing and manipulation library.\n"
- "The parser provides a low level event driven SAC-like API and a CSS object\n"
- "model like API. Libcroco provides a CSS2 selection engine and an experimental\n"
- "XML/CSS rendering engine."
- msgstr ""
- #: gnu/packages/gnome.scm:3549
- msgid "G Structured File Library"
- msgstr ""
- #: gnu/packages/gnome.scm:3550
- msgid ""
- "Libgsf aims to provide an efficient extensible I/O abstraction\n"
- "for dealing with different structured file formats."
- msgstr ""
- #: gnu/packages/gnome.scm:3716
- msgid "SVG rendering library"
- msgstr ""
- #: gnu/packages/gnome.scm:3717
- msgid ""
- "Librsvg is a library to render SVG images to Cairo surfaces.\n"
- "GNOME uses this to render SVG icons. Outside of GNOME, other desktop\n"
- "environments use it for similar purposes. Wikimedia uses it for Wikipedia's SVG\n"
- "diagrams."
- msgstr ""
- #: gnu/packages/gnome.scm:3808
- msgid "Render SVG files using Cairo (ancient C version)"
- msgstr ""
- #: gnu/packages/gnome.scm:3841
- msgid "Create trees of CORBA Interface Definition Language files"
- msgstr ""
- #: gnu/packages/gnome.scm:3842
- msgid ""
- "Libidl is a library for creating trees of CORBA Interface\n"
- "Definition Language (idl) files, which is a specification for defining\n"
- "portable interfaces. libidl was initially written for orbit (the orb from the\n"
- "GNOME project, and the primary means of libidl distribution). However, the\n"
- "functionality was designed to be as reusable and portable as possible."
- msgstr ""
- #: gnu/packages/gnome.scm:3896
- msgid "CORBA 2.4-compliant Object Request Broker"
- msgstr ""
- #: gnu/packages/gnome.scm:3897
- msgid ""
- "ORBit2 is a CORBA 2.4-compliant Object Request Broker (orb)\n"
- "featuring mature C, C++ and Python bindings."
- msgstr ""
- #: gnu/packages/gnome.scm:3950
- msgid "Framework for creating reusable components for use in GNOME applications"
- msgstr ""
- #: gnu/packages/gnome.scm:3951
- msgid ""
- "Bonobo is a framework for creating reusable components for\n"
- "use in GNOME applications, built on top of CORBA."
- msgstr ""
- #: gnu/packages/gnome.scm:3981
- msgid "Store application preferences"
- msgstr ""
- #: gnu/packages/gnome.scm:3982
- msgid ""
- "Gconf is a system for storing application preferences. It\n"
- "is intended for user preferences; not arbitrary data storage."
- msgstr ""
- #: gnu/packages/gnome.scm:4015
- msgid "Base MIME and Application database for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:4016
- msgid ""
- "GNOME Mime Data is a module which contains the base MIME\n"
- "and Application database for GNOME. The data stored by this module is\n"
- "designed to be accessed through the MIME functions in GnomeVFS."
- msgstr ""
- #: gnu/packages/gnome.scm:4054
- msgid "Access files and folders in GNOME applications"
- msgstr ""
- #: gnu/packages/gnome.scm:4056
- msgid ""
- "GnomeVFS is the core library used to access files and folders in GNOME\n"
- "applications. It provides a file system abstraction which allows applications\n"
- "to access local and remote files with a single consistent API."
- msgstr ""
- #: gnu/packages/gnome.scm:4096
- msgid "Useful routines for building applications"
- msgstr ""
- #: gnu/packages/gnome.scm:4097
- msgid ""
- "The libgnome library provides a number of useful routines\n"
- "for building modern applications, including session management, activation of\n"
- "files and URIs, and displaying help."
- msgstr ""
- #: gnu/packages/gnome.scm:4120
- msgid "2D drawing library"
- msgstr ""
- #: gnu/packages/gnome.scm:4121
- msgid ""
- "Libart is a 2D drawing library intended as a\n"
- "high-quality vector-based 2D library with antialiasing and alpha composition."
- msgstr ""
- #: gnu/packages/gnome.scm:4147
- msgid "Flexible widget for creating interactive structured graphics"
- msgstr ""
- #: gnu/packages/gnome.scm:4148
- msgid ""
- "The GnomeCanvas widget provides a flexible widget for\n"
- "creating interactive structured graphics."
- msgstr ""
- #: gnu/packages/gnome.scm:4169
- msgid "C++ bindings to the GNOME Canvas library"
- msgstr ""
- #: gnu/packages/gnome.scm:4170
- msgid "C++ bindings to the GNOME Canvas library."
- msgstr ""
- #: gnu/packages/gnome.scm:4195
- msgid "Additional widgets for applications"
- msgstr ""
- #: gnu/packages/gnome.scm:4196
- msgid ""
- "The libgnomeui library provides additional widgets for\n"
- "applications. Many of the widgets from libgnomeui have already been\n"
- "ported to GTK+."
- msgstr ""
- #: gnu/packages/gnome.scm:4221
- msgid "Load glade interfaces and access the glade built widgets"
- msgstr ""
- #: gnu/packages/gnome.scm:4222
- msgid ""
- "Libglade is a library that provides interfaces for loading\n"
- "graphical interfaces described in glade files and for accessing the\n"
- "widgets built in the loading process."
- msgstr ""
- #: gnu/packages/gnome.scm:4263
- msgid "Some user interface controls using Bonobo"
- msgstr ""
- #: gnu/packages/gnome.scm:4264
- msgid ""
- "The Bonobo UI library provides a number of user interface\n"
- "controls using the Bonobo component framework."
- msgstr ""
- #: gnu/packages/gnome.scm:4291
- msgid "Window Navigator Construction Kit"
- msgstr ""
- #: gnu/packages/gnome.scm:4293
- msgid ""
- "Libwnck is the Window Navigator Construction Kit, a library for use in\n"
- "writing pagers, tasklists, and more generally applications that are dealing\n"
- "with window management. It tries hard to respect the Extended Window Manager\n"
- "Hints specification (EWMH)."
- msgstr ""
- #: gnu/packages/gnome.scm:4342
- msgid "Document-centric objects and utilities"
- msgstr ""
- #: gnu/packages/gnome.scm:4343
- msgid "A GLib/GTK+ set of document-centric objects and utilities."
- msgstr ""
- #: gnu/packages/gnome.scm:4427
- msgid "Spreadsheet application"
- msgstr ""
- #: gnu/packages/gnome.scm:4429
- msgid ""
- "GNUmeric is a GNU spreadsheet application, running under GNOME. It is\n"
- "interoperable with other spreadsheet applications. It has a vast array of\n"
- "features beyond typical spreadsheet functionality, such as support for linear\n"
- "and non-linear solvers, statistical analysis, and telecommunication\n"
- "engineering."
- msgstr ""
- #: gnu/packages/gnome.scm:4489
- msgid "Basic image editor for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:4491
- msgid "Drawing is a basic image editor aiming at the GNOME desktop."
- msgstr ""
- #: gnu/packages/gnome.scm:4541
- msgid "Manage encryption keys and passwords in the GNOME keyring"
- msgstr ""
- #: gnu/packages/gnome.scm:4543
- msgid ""
- "Seahorse is a GNOME application for managing encryption keys and\n"
- "passwords in the GNOME keyring."
- msgstr ""
- #: gnu/packages/gnome.scm:4593
- msgid "Compiler using the GObject type system"
- msgstr ""
- #: gnu/packages/gnome.scm:4594
- msgid ""
- "Vala is a programming language using modern high level\n"
- "abstractions without imposing additional runtime requirements and without using\n"
- "a different ABI compared to applications and libraries written in C. Vala uses\n"
- "the GObject type system and has additional code generation routines that make\n"
- "targeting the GNOME stack simple."
- msgstr ""
- #: gnu/packages/gnome.scm:4682
- msgid "Virtual Terminal Emulator"
- msgstr ""
- #: gnu/packages/gnome.scm:4684
- msgid ""
- "VTE is a library (libvte) implementing a terminal emulator widget for\n"
- "GTK+, and a minimal sample application (vte) using that. Vte is mainly used in\n"
- "gnome-terminal, but can also be used to embed a console/terminal in games,\n"
- "editors, IDEs, etc."
- msgstr ""
- #: gnu/packages/gnome.scm:4715
- msgid "Enhanced VTE terminal widget"
- msgstr ""
- #: gnu/packages/gnome.scm:4717
- msgid ""
- "VTE is a library (libvte) implementing a terminal emulator widget for\n"
- "GTK+, this fork provides additional functions exposed for keyboard text\n"
- "selection and URL hints."
- msgstr ""
- #: gnu/packages/gnome.scm:4796
- msgid "Remote desktop viewer for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:4797
- msgid ""
- "Vinagre is a remote display client supporting the VNC, SPICE\n"
- "and RDP protocols."
- msgstr ""
- #: gnu/packages/gnome.scm:4849
- msgid "Low-level GNOME configuration system"
- msgstr ""
- #: gnu/packages/gnome.scm:4850
- msgid ""
- "Dconf is a low-level configuration system. Its main purpose\n"
- "is to provide a backend to GSettings on platforms that don't already have\n"
- "configuration storage systems."
- msgstr ""
- #: gnu/packages/gnome.scm:4879
- msgid "Glib and GObject implementation of JSON"
- msgstr ""
- #: gnu/packages/gnome.scm:4880
- msgid ""
- "JSON-GLib is a library providing serialization and\n"
- "described by RFC 4627. It implements a full JSON parser and generator using\n"
- "GLib and GObject, and integrates JSON with GLib data types."
- msgstr ""
- #: gnu/packages/gnome.scm:4977
- msgid "High-level API for X Keyboard Extension"
- msgstr ""
- #: gnu/packages/gnome.scm:4979
- msgid ""
- "LibXklavier is a library providing high-level API for X Keyboard\n"
- "Extension known as XKB. This library is intended to support XFree86 and other\n"
- "commercial X servers. It is useful for creating XKB-related software (layout\n"
- "indicators etc)."
- msgstr ""
- #: gnu/packages/gnome.scm:5017
- msgid "Network extensions for GLib"
- msgstr ""
- #: gnu/packages/gnome.scm:5019
- msgid ""
- "Glib-networking contains the implementations of certain GLib networking\n"
- "features that cannot be implemented directly in GLib itself because of their\n"
- "dependencies. Currently it contains GnuTLS and OpenSSL-based implementations of\n"
- "GTlsBackend, a libproxy-based implementation of GProxyResolver,\n"
- "GLibproxyResolver, and a GNOME GProxyResolver that uses the proxy information\n"
- "from the GSettings schemas in gsettings-desktop-schemas."
- msgstr ""
- #: gnu/packages/gnome.scm:5071
- msgid "Securely delete your files"
- msgstr ""
- #: gnu/packages/gnome.scm:5073
- msgid ""
- "Raider is a simple shredding program built for GNOME. Also known as\n"
- "File Shredder, it uses the GNU Core Utility called shred to securely delete\n"
- "files."
- msgstr ""
- #: gnu/packages/gnome.scm:5105
- msgid "RESTful web api query library"
- msgstr ""
- #: gnu/packages/gnome.scm:5107
- msgid ""
- "This library was designed to make it easier to access web services that\n"
- "claim to be \"RESTful\". It includes convenience wrappers for libsoup and\n"
- "libxml to ease remote use of the RESTful API."
- msgstr ""
- #: gnu/packages/gnome.scm:5193
- msgid "GtkWidget C library for displaying maps"
- msgstr ""
- #: gnu/packages/gnome.scm:5194
- msgid ""
- "@code{libshumate} is a C library providing a\n"
- "@code{GtkWidget} to display maps. It supports numerous free map sources such\n"
- "as OpenStreetMap, OpenCycleMap, OpenAerialMap and Maps."
- msgstr ""
- #: gnu/packages/gnome.scm:5257
- msgid "GLib-based HTTP Library"
- msgstr ""
- #: gnu/packages/gnome.scm:5259
- msgid ""
- "LibSoup is an HTTP client/server library for GNOME. It uses GObjects\n"
- "and the GLib main loop, to integrate well with GNOME applications."
- msgstr ""
- #: gnu/packages/gnome.scm:5386
- msgid "GObject bindings for \"Secret Service\" API"
- msgstr ""
- #: gnu/packages/gnome.scm:5388
- msgid ""
- "Libsecret is a GObject based library for storing and retrieving passwords\n"
- "and other secrets. It communicates with the \"Secret Service\" using DBus."
- msgstr ""
- #: gnu/packages/gnome.scm:5425
- msgid ""
- "Five or More is a game where you try to align\n"
- " five or more objects of the same color and shape causing them to disappear.\n"
- " On every turn more objects will appear, until the board is full.\n"
- " Try to last as long as possible."
- msgstr ""
- #: gnu/packages/gnome.scm:5449
- msgid "Documentation tool for GObject-based libraries"
- msgstr ""
- #: gnu/packages/gnome.scm:5450
- msgid ""
- "GI-DocGen is a document generator for GObject-based\n"
- "libraries. GObject is the base type system of the GNOME project. GI-Docgen\n"
- "reuses the introspection data generated by GObject-based libraries to generate\n"
- "the API reference of these libraries, as well as other ancillary\n"
- "documentation."
- msgstr ""
- #: gnu/packages/gnome.scm:5493
- msgid "Minesweeper game"
- msgstr ""
- #: gnu/packages/gnome.scm:5495
- msgid ""
- "Mines (previously gnomine) is a puzzle game where you locate mines\n"
- "floating in an ocean using only your brain and a little bit of luck."
- msgstr ""
- #: gnu/packages/gnome.scm:5534
- msgid "Write to multiple USB devices at once"
- msgstr ""
- #: gnu/packages/gnome.scm:5536
- msgid ""
- "MultiWriter can be used to write an ISO file to multiple USB devices at\n"
- "once."
- msgstr ""
- #: gnu/packages/gnome.scm:5578
- msgid "Japanese logic game"
- msgstr ""
- #: gnu/packages/gnome.scm:5580
- msgid ""
- "Sudoku is a Japanese logic game that exploded in popularity in 2005.\n"
- "GNOME Sudoku is meant to have an interface as simple and unobstrusive as\n"
- "possible while still providing features that make playing difficult Sudoku\n"
- "more fun."
- msgstr ""
- #: gnu/packages/gnome.scm:5622
- msgid "GNOME terminal emulator"
- msgstr ""
- #: gnu/packages/gnome.scm:5624
- msgid "Console is a simple terminal emulator for GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:5680
- msgid "Terminal emulator"
- msgstr ""
- #: gnu/packages/gnome.scm:5682
- msgid ""
- "GNOME Terminal is a terminal emulator application for accessing a\n"
- "UNIX shell environment which can be used to run programs available on\n"
- "your system.\n"
- "\n"
- "It supports several profiles, multiple tabs and implements several\n"
- "keyboard shortcuts."
- msgstr ""
- #: gnu/packages/gnome.scm:5715 gnu/packages/gnome.scm:8004
- msgid "GNOME text editor"
- msgstr ""
- #: gnu/packages/gnome.scm:5717
- msgid ""
- "GNOME Text Editor is a simple text editor that focuses on session\n"
- "management. It keeps track of changes and state even if you quit the\n"
- "application. You can come back to your work even if you've never saved it to a\n"
- "file."
- msgstr ""
- #: gnu/packages/gnome.scm:5786
- msgid "Color management service"
- msgstr ""
- #: gnu/packages/gnome.scm:5787
- msgid ""
- "Colord is a system service that makes it easy to manage,\n"
- "install and generate color profiles to accurately color manage input and\n"
- "output devices."
- msgstr ""
- #: gnu/packages/gnome.scm:5864
- msgid "Geolocation service"
- msgstr ""
- #: gnu/packages/gnome.scm:5865
- msgid ""
- "Geoclue is a D-Bus service that provides location\n"
- "information. The primary goal of the Geoclue project is to make creating\n"
- "location-aware applications as simple as possible, while the secondary goal is\n"
- "to ensure that no application can access location information without explicit\n"
- "permission from user."
- msgstr ""
- #: gnu/packages/gnome.scm:5909
- msgid "Geocoding and reverse-geocoding library"
- msgstr ""
- #: gnu/packages/gnome.scm:5911
- msgid ""
- "geocode-glib is a convenience library for geocoding (finding longitude,\n"
- "and latitude from an address) and reverse geocoding (finding an address from\n"
- "coordinates) using the Nominatim service. geocode-glib caches requests for\n"
- "faster results and to avoid unnecessary server load."
- msgstr ""
- #: gnu/packages/gnome.scm:5998
- msgid "System daemon for managing power devices"
- msgstr ""
- #: gnu/packages/gnome.scm:6000
- msgid ""
- "UPower is an abstraction for enumerating power devices,\n"
- "listening to device events and querying history and statistics. Any\n"
- "application or service on the system can access the org.freedesktop.UPower\n"
- "service via the system message bus."
- msgstr ""
- #: gnu/packages/gnome.scm:6049
- msgid "Location, time zone, and weather library for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:6051
- msgid ""
- "libgweather is a library to access weather information from online\n"
- "services for numerous locations."
- msgstr ""
- #: gnu/packages/gnome.scm:6208
- msgid "GNOME settings daemon"
- msgstr ""
- #: gnu/packages/gnome.scm:6210
- msgid ""
- "This package contains the daemon responsible for setting the various\n"
- "parameters of a GNOME session and the applications that run under it. It\n"
- "handles settings such keyboard layout, shortcuts, and accessibility, clipboard\n"
- "settings, themes, mouse settings, and startup of other daemons."
- msgstr ""
- #: gnu/packages/gnome.scm:6240
- msgid "Library to parse and save media playlists for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:6241
- msgid ""
- "Totem-pl-parser is a GObjects-based library to parse and save\n"
- "playlists in a variety of formats."
- msgstr ""
- #: gnu/packages/gnome.scm:6272
- msgid "Solitaire card games"
- msgstr ""
- #: gnu/packages/gnome.scm:6274
- msgid ""
- "Aisleriot (also known as Solitaire or sol) is a collection of card games\n"
- "which are easy to play with the aid of a mouse."
- msgstr ""
- #: gnu/packages/gnome.scm:6298
- msgid "Actions, Menus and Toolbars Kit for GTK+ applications"
- msgstr ""
- #: gnu/packages/gnome.scm:6300
- msgid ""
- "Amtk is the acronym for @acronym{Amtk, Actions Menus and Toolbars Kit}.\n"
- "It is a basic GtkUIManager replacement based on GAction. It is suitable for\n"
- "both a traditional UI or a modern UI with a GtkHeaderBar."
- msgstr ""
- #: gnu/packages/gnome.scm:6340
- msgid "API documentation browser for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:6342
- msgid ""
- "Devhelp is an API documentation browser for GTK+ and GNOME. It works\n"
- "natively with GTK-Doc (the API reference system developed for GTK+ and used\n"
- "throughout GNOME for API documentation)."
- msgstr ""
- #: gnu/packages/gnome.scm:6424
- msgid "Object oriented GL/GLES Abstraction/Utility Layer"
- msgstr ""
- #: gnu/packages/gnome.scm:6426
- msgid ""
- "Cogl is a small library for using 3D graphics hardware to draw pretty\n"
- "pictures. The API departs from the flat state machine style of OpenGL and is\n"
- "designed to make it easy to write orthogonal components that can render\n"
- "without stepping on each others toes."
- msgstr ""
- #: gnu/packages/gnome.scm:6483
- msgid "OpenGL-based interactive canvas library"
- msgstr ""
- #: gnu/packages/gnome.scm:6485 gnu/packages/gnome.scm:6512
- msgid ""
- "Clutter is an OpenGL-based interactive canvas library, designed for\n"
- "creating fast, mainly 2D single window applications such as media box UIs,\n"
- "presentations, kiosk style applications and so on."
- msgstr ""
- #: gnu/packages/gnome.scm:6510
- msgid "OpenGL-based interactive canvas library GTK+ widget"
- msgstr ""
- #: gnu/packages/gnome.scm:6536
- msgid "Integration library for using GStreamer with Clutter"
- msgstr ""
- #: gnu/packages/gnome.scm:6538
- msgid ""
- "Clutter-Gst is an integration library for using GStreamer with Clutter.\n"
- "It provides a GStreamer sink to upload frames to GL and an actor that\n"
- "implements the ClutterGstPlayer interface using playbin. Clutter is an\n"
- "OpenGL-based interactive canvas library."
- msgstr ""
- #: gnu/packages/gnome.scm:6569
- msgid "C library providing a ClutterActor to display maps"
- msgstr ""
- #: gnu/packages/gnome.scm:6571
- msgid ""
- "libchamplain is a C library providing a ClutterActor to display maps.\n"
- "It also provides a Gtk+ widget to display maps in Gtk+ applications. Python\n"
- "and Perl bindings are also available. It supports numerous free map sources\n"
- "such as OpenStreetMap, OpenCycleMap, OpenAerialMap, and Maps for free."
- msgstr ""
- #: gnu/packages/gnome.scm:6613
- msgid "Object mapper from GObjects to SQLite"
- msgstr ""
- #: gnu/packages/gnome.scm:6615
- msgid ""
- "Gom provides an object mapper from GObjects to SQLite. It helps you\n"
- "write applications that need to store structured data as well as make complex\n"
- "queries upon that data."
- msgstr ""
- #: gnu/packages/gnome.scm:6648
- msgid "Useful functionality shared among GNOME games"
- msgstr ""
- #: gnu/packages/gnome.scm:6650
- msgid ""
- "libgnome-games-support is a small library intended for internal use by\n"
- "GNOME Games, but it may be used by others."
- msgstr ""
- #: gnu/packages/gnome.scm:6706
- msgid "Sliding block puzzles"
- msgstr ""
- #: gnu/packages/gnome.scm:6708
- msgid ""
- "GNOME Klotski is a set of block sliding puzzles. The objective is to move\n"
- "the patterned block to the area bordered by green markers. To do so, you will\n"
- "need to slide other blocks out of the way. Complete each puzzle in as few moves\n"
- "as possible!"
- msgstr ""
- #: gnu/packages/gnome.scm:6755
- msgid "Framework for discovering and browsing media"
- msgstr ""
- #: gnu/packages/gnome.scm:6757
- msgid ""
- "Grilo is a framework focused on making media discovery and browsing easy\n"
- "for application developers."
- msgstr ""
- #: gnu/packages/gnome.scm:6812
- msgid "Plugins for the Grilo media discovery library"
- msgstr ""
- #: gnu/packages/gnome.scm:6814
- msgid ""
- "Grilo is a framework focused on making media discovery and browsing easy\n"
- "for application developers. This package provides plugins for common media\n"
- "discovery protocols."
- msgstr ""
- #: gnu/packages/gnome.scm:6907
- msgid "Simple media player for GNOME based on GStreamer"
- msgstr ""
- #: gnu/packages/gnome.scm:6908
- msgid ""
- "Totem is a simple yet featureful media player for GNOME\n"
- "which can read a large number of file formats."
- msgstr ""
- #: gnu/packages/gnome.scm:6995
- msgid "Music player for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:6996
- msgid ""
- "Rhythmbox is a music playing application for GNOME. It\n"
- "supports playlists, song ratings, and any codecs installed through gstreamer."
- msgstr ""
- #: gnu/packages/gnome.scm:7057
- msgid "GNOME image viewer"
- msgstr ""
- #: gnu/packages/gnome.scm:7058
- msgid ""
- "Eye of GNOME is the GNOME image viewer. It\n"
- "supports image conversion, rotation, and slideshows."
- msgstr ""
- #: gnu/packages/gnome.scm:7080
- msgid "Extensions for the Eye of GNOME image viewer"
- msgstr ""
- #: gnu/packages/gnome.scm:7094
- msgid ""
- "This package provides plugins for the Eye of GNOME (EOG) image viewer,\n"
- "notably:\n"
- "\n"
- "@itemize\n"
- "@item @dfn{EXIF Display}, which displays camera (EXIF) information;\n"
- "@item @dfn{Map}, which displays a map of where the picture was taken on the\n"
- "side panel;\n"
- "@item @dfn{Slideshow Shuffle}, to shuffle images in slideshow mode.\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/gnome.scm:7131
- msgid "GObject bindings for libudev"
- msgstr ""
- #: gnu/packages/gnome.scm:7133
- msgid ""
- "This library provides GObject bindings for libudev. It was originally\n"
- "part of udev-extras, then udev, then systemd. It's now a project on its own."
- msgstr ""
- #: gnu/packages/gnome.scm:7194
- msgid "Userspace virtual file system for GIO"
- msgstr ""
- #: gnu/packages/gnome.scm:7196
- msgid ""
- "GVFS is a userspace virtual file system designed to work with the I/O\n"
- "abstraction of GIO. It contains a GIO module that seamlessly adds GVFS\n"
- "support to all applications using the GIO API. It also supports exposing the\n"
- "GVFS mounts to non-GIO applications using FUSE.\n"
- "\n"
- "GVFS comes with a set of backends, including trash support, SFTP, SMB, HTTP,\n"
- "DAV, and others."
- msgstr ""
- #: gnu/packages/gnome.scm:7235
- msgid "GLib binding for libusb1"
- msgstr ""
- #: gnu/packages/gnome.scm:7237
- msgid ""
- "GUsb is a GObject wrapper for libusb1 that makes it easy to do\n"
- "asynchronous control, bulk and interrupt transfers with proper cancellation\n"
- "and integration into a mainloop. This makes it easy to integrate low level\n"
- "USB transfers with your high-level application or system daemon."
- msgstr ""
- #: gnu/packages/gnome.scm:7289
- msgid "Document and image scanner"
- msgstr ""
- #: gnu/packages/gnome.scm:7291
- msgid ""
- "Document Scanner is an easy-to-use application that lets you connect your\n"
- "scanner and quickly capture images and documents in an appropriate format. It\n"
- "supports any scanner for which a suitable SANE driver is available, which is\n"
- "almost all of them."
- msgstr ""
- #: gnu/packages/gnome.scm:7361
- msgid "Web browser for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:7363
- msgid ""
- "Eolie is a new web browser for GNOME. It features Firefox sync support,\n"
- "a secret password store, an adblocker, and a modern UI."
- msgstr ""
- #: gnu/packages/gnome.scm:7438
- msgid "GNOME web browser"
- msgstr ""
- #: gnu/packages/gnome.scm:7440
- msgid ""
- "Epiphany is a GNOME web browser targeted at non-technical users. Its\n"
- "principles are simplicity and standards compliance."
- msgstr ""
- #: gnu/packages/gnome.scm:7489 gnu/packages/gnome.scm:7529
- msgid "D-Bus debugger"
- msgstr ""
- #: gnu/packages/gnome.scm:7491
- msgid ""
- "D-Feet is a D-Bus debugger, which can be used to inspect D-Bus interfaces\n"
- "of running programs and invoke methods on those interfaces."
- msgstr ""
- #: gnu/packages/gnome.scm:7531
- msgid ""
- "D-Spy is a tool to explore and test end-points and interfaces of running\n"
- "programs via D-Bus. It also ships a library for integration into development\n"
- "environments."
- msgstr ""
- #: gnu/packages/gnome.scm:7561
- msgid "XSL stylesheets for Yelp"
- msgstr ""
- #: gnu/packages/gnome.scm:7562
- msgid ""
- "Yelp-XSL is a collection of programs and data files to help\n"
- "you build, maintain, and distribute documentation. It provides XSLT stylesheets\n"
- "that can be built upon for help viewers and publishing systems. These\n"
- "stylesheets output JavaScript and CSS content, and reference images\n"
- "provided by yelp-xsl. It also redistributes copies of the jQuery and\n"
- "jQuery.Syntax JavaScript libraries."
- msgstr ""
- #: gnu/packages/gnome.scm:7606
- msgid "GNOME help browser"
- msgstr ""
- #: gnu/packages/gnome.scm:7608
- msgid ""
- "Yelp is the help viewer in Gnome. It natively views Mallard, DocBook,\n"
- "man, info, and HTML documents. It can locate documents according to the\n"
- "freedesktop.org help system specification."
- msgstr ""
- #: gnu/packages/gnome.scm:7636
- msgid "Yelp documentation tools"
- msgstr ""
- #: gnu/packages/gnome.scm:7638
- msgid ""
- "Yelp-tools is a collection of scripts and build utilities to help create,\n"
- "manage, and publish documentation for Yelp and the web. Most of the heavy\n"
- "lifting is done by packages like yelp-xsl and itstool. This package just\n"
- "wraps things up in a developer-friendly way."
- msgstr ""
- #: gnu/packages/gnome.scm:7674
- msgid "GObject collection library"
- msgstr ""
- #: gnu/packages/gnome.scm:7676
- msgid ""
- "Libgee is a utility library providing GObject-based interfaces and\n"
- "classes for commonly used data structures."
- msgstr ""
- #: gnu/packages/gnome.scm:7718
- msgid "GObject wrapper around the Exiv2 photo metadata library"
- msgstr ""
- #: gnu/packages/gnome.scm:7720
- msgid ""
- "Gexiv2 is a GObject wrapper around the Exiv2 photo metadata library. It\n"
- "allows for GNOME applications to easily inspect and update EXIF, IPTC, and XMP\n"
- "metadata in photo and video files of various formats."
- msgstr ""
- #: gnu/packages/gnome.scm:7773
- msgid "Photo manager for GNOME 3"
- msgstr ""
- #: gnu/packages/gnome.scm:7775
- msgid ""
- "Shotwell is a digital photo manager designed for the GNOME desktop\n"
- "environment. It allows you to import photos from disk or camera, organize\n"
- "them by keywords and events, view them in full-window or fullscreen mode, and\n"
- "share them with others via social networking and more."
- msgstr ""
- #: gnu/packages/gnome.scm:7816
- msgid "Graphical archive manager for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:7817
- msgid ""
- "File Roller is an archive manager for the GNOME desktop\n"
- "environment that allows users to view, unpack, and create compressed archives\n"
- "such as gzip tarballs."
- msgstr ""
- #: gnu/packages/gnome.scm:7876
- msgid "Session manager for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:7878
- msgid ""
- "This package contains the GNOME session manager, as well as a\n"
- "configuration program to choose applications starting on login."
- msgstr ""
- #: gnu/packages/gnome.scm:7928
- msgid "Javascript bindings for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:7931
- msgid ""
- "Gjs is a javascript binding for GNOME. It's mainly based on spidermonkey\n"
- "javascript engine and the GObject introspection framework."
- msgstr ""
- #: gnu/packages/gnome.scm:8005
- msgid ""
- "While aiming at simplicity and ease of use, gedit is a\n"
- "powerful general purpose text editor."
- msgstr ""
- #: gnu/packages/gnome.scm:8031
- msgid "Display graphical dialog boxes from shell scripts"
- msgstr ""
- #: gnu/packages/gnome.scm:8034
- msgid ""
- "Zenity is a rewrite of gdialog, the GNOME port of dialog which allows you\n"
- "to display dialog boxes from the commandline and shell scripts."
- msgstr ""
- #: gnu/packages/gnome.scm:8236
- msgid "Window and compositing manager"
- msgstr ""
- #: gnu/packages/gnome.scm:8239
- msgid ""
- "Mutter is a window and compositing manager that displays and manages your\n"
- "desktop via OpenGL. Mutter combines a sophisticated display engine using the\n"
- "Clutter toolkit with solid window-management logic inherited from the Metacity\n"
- "window manager."
- msgstr ""
- #: gnu/packages/gnome.scm:8284
- msgid "Single sign-on framework for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:8287
- msgid ""
- "GNOME Online Accounts provides interfaces so that applications and\n"
- "libraries in GNOME can access the user's online accounts. It has providers\n"
- "for Google, ownCloud, Facebook, Flickr, Windows Live, Pocket, Foursquare,\n"
- "Microsoft Exchange, Last.fm, IMAP/SMTP, Jabber, SIP and Kerberos."
- msgstr ""
- #: gnu/packages/gnome.scm:8404
- msgid "Store address books and calendars"
- msgstr ""
- #: gnu/packages/gnome.scm:8407
- msgid ""
- "This package provides a unified backend for programs that work with\n"
- "contacts, tasks, and calendar information. It was originally developed for\n"
- "Evolution (hence the name), but is now used by other packages as well."
- msgstr ""
- #: gnu/packages/gnome.scm:8491
- msgid "Text entry and UI navigation application"
- msgstr ""
- #: gnu/packages/gnome.scm:8494
- msgid ""
- "Caribou is an input assistive technology intended for switch and pointer\n"
- "users."
- msgstr ""
- #: gnu/packages/gnome.scm:8640
- msgid "Network connection manager"
- msgstr ""
- #: gnu/packages/gnome.scm:8643
- msgid ""
- "NetworkManager is a system network service that manages your network\n"
- "devices and connections, attempting to keep active network connectivity when\n"
- "available. It manages ethernet, WiFi, mobile broadband (WWAN), and PPPoE\n"
- "devices, and provides VPN integration with a variety of different VPN\n"
- "services."
- msgstr ""
- #: gnu/packages/gnome.scm:8704
- msgid "OpenVPN plug-in for NetworkManager"
- msgstr ""
- #: gnu/packages/gnome.scm:8706
- msgid ""
- "This extension of NetworkManager allows it to take care of connections\n"
- "to virtual private networks (VPNs) via OpenVPN."
- msgstr ""
- #: gnu/packages/gnome.scm:8755
- msgid "VPNC plug-in for NetworkManager"
- msgstr ""
- #: gnu/packages/gnome.scm:8757
- msgid ""
- "Support for configuring virtual private networks based on VPNC.\n"
- "Compatible with Cisco VPN concentrators configured to use IPsec."
- msgstr ""
- #: gnu/packages/gnome.scm:8808
- msgid "OpenConnect plug-in for NetworkManager"
- msgstr ""
- #: gnu/packages/gnome.scm:8810
- msgid ""
- "This extension of NetworkManager allows it to take care of connections\n"
- "to @acronym{VPNs, virtual private networks} via OpenConnect, an open client for\n"
- "Cisco's AnyConnect SSL VPN."
- msgstr ""
- #: gnu/packages/gnome.scm:8872
- msgid "Fortinet SSLVPN plug-in for NetworkManager"
- msgstr ""
- #: gnu/packages/gnome.scm:8874
- msgid ""
- "This extension of NetworkManager allows it to take care of connections\n"
- "to virtual private networks (VPNs) via Fortinet SSLVPN."
- msgstr ""
- #: gnu/packages/gnome.scm:8897
- msgid "Database of broadband connection configuration"
- msgstr ""
- #: gnu/packages/gnome.scm:8898
- msgid "Database of broadband connection configuration."
- msgstr ""
- #: gnu/packages/gnome.scm:8937
- msgid "Applet for managing network connections"
- msgstr ""
- #: gnu/packages/gnome.scm:8940
- msgid ""
- "This package contains a systray applet for NetworkManager. It displays\n"
- "the available networks and allows users to easily switch between them."
- msgstr ""
- #: gnu/packages/gnome.scm:8997
- msgid "C++ bindings to the libxml2 XML parser library"
- msgstr "libxml2 XML 구문 분석기 라이브러리에 C++ 바인딩"
- #: gnu/packages/gnome.scm:8999
- msgid ""
- "This package provides a C++ interface to the libxml2 XML parser\n"
- "library."
- msgstr ""
- "이 꾸러미는 libxml2 XML 구문 분석기 라이브러리에 C++ 연결장치를\n"
- "제공합니다."
- #: gnu/packages/gnome.scm:9235
- msgid "Display manager for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:9238
- msgid ""
- "GNOME Display Manager is a system service that is responsible for\n"
- "providing graphical log-ins and managing local and remote displays."
- msgstr ""
- #: gnu/packages/gnome.scm:9259
- msgid "Portable system access library"
- msgstr ""
- #: gnu/packages/gnome.scm:9262
- msgid ""
- "LibGTop is a library to get system specific data such as CPU and memory\n"
- "usage and information about running processes."
- msgstr ""
- #: gnu/packages/gnome.scm:9300
- msgid "GNOME Bluetooth subsystem"
- msgstr ""
- #: gnu/packages/gnome.scm:9303
- msgid ""
- "This package contains tools for managing and manipulating Bluetooth\n"
- "devices using the GNOME desktop."
- msgstr ""
- #: gnu/packages/gnome.scm:9399
- msgid "Utilities to configure the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:9402
- msgid ""
- "This package contains configuration applets for the GNOME desktop,\n"
- "allowing to set accessibility configuration, desktop fonts, keyboard and mouse\n"
- "properties, sound setup, desktop theme and background, user interface\n"
- "properties, screen resolution, and other GNOME parameters."
- msgstr ""
- #: gnu/packages/gnome.scm:9579
- msgid "Desktop shell for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:9582
- msgid ""
- "GNOME Shell provides core user interface functions for the GNOME desktop,\n"
- "like switching to windows and launching applications."
- msgstr ""
- #: gnu/packages/gnome.scm:9631
- msgid "VNC client viewer widget for GTK+"
- msgstr ""
- #: gnu/packages/gnome.scm:9632
- msgid ""
- "GTK-VNC is a project providing client side APIs for the RFB\n"
- "protocol / VNC remote desktop technology. It is built using coroutines allowing\n"
- "it to be completely asynchronous while remaining single threaded. It provides a\n"
- "core C library, and bindings for Python (PyGTK)."
- msgstr ""
- #: gnu/packages/gnome.scm:9658
- msgid "Archives integration support for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:9661
- msgid ""
- "GNOME Autoar is a library which makes creating and extracting archives\n"
- "easy, safe, and automatic."
- msgstr ""
- #: gnu/packages/gnome.scm:9754 gnu/packages/gnome.scm:9887
- msgid "Metadata database, indexer and search tool"
- msgstr ""
- #: gnu/packages/gnome.scm:9757
- msgid ""
- "Tracker is a search engine and triplestore for desktop, embedded and mobile.\n"
- "\n"
- "It is a middleware component aimed at desktop application developers who want\n"
- "their apps to browse and search user content. It's not designed to be used\n"
- "directly by desktop users, but it provides a commandline tool named\n"
- "@command{tracker} for the adventurous.\n"
- "\n"
- "Tracker allows your application to instantly perform full-text searches across\n"
- "all documents. This feature is used by the @{emph{search} bar in GNOME Files, for\n"
- "example. This is achieved by indexing the user's home directory in the\n"
- "background.\n"
- "\n"
- "Tracker also allows your application to query and list content that the user\n"
- "has stored. For example, GNOME Music displays all the music files that are\n"
- "found by Tracker. This means that GNOME Music doesn't need to maintain a\n"
- "database of its own.\n"
- "\n"
- "If you need to go beyond simple searches, Tracker is also a linked data\n"
- "endpoint and it understands SPARQL."
- msgstr ""
- #: gnu/packages/gnome.scm:9890
- msgid ""
- "Tracker is an advanced framework for first class objects with associated\n"
- "metadata and tags. It provides a one stop solution for all metadata, tags,\n"
- "shared object databases, search tools and indexing."
- msgstr ""
- #: gnu/packages/gnome.scm:9975
- msgid "File manager for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:9978
- msgid ""
- "Nautilus (Files) is a file manager designed to fit the GNOME desktop\n"
- "design and behaviour, giving the user a simple way to navigate and manage its\n"
- "files."
- msgstr ""
- #: gnu/packages/gnome.scm:10014
- msgid "Disk usage analyzer for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:10016
- msgid ""
- "Baobab (Disk Usage Analyzer) is a graphical application to analyse disk\n"
- "usage in the GNOME desktop environment. It can easily scan device volumes or\n"
- "a specific user-requested directory branch (local or remote). Once the scan\n"
- "is complete it provides a graphical representation of each selected folder."
- msgstr ""
- #: gnu/packages/gnome.scm:10039
- msgid "Background images for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:10041
- msgid ""
- "GNOME backgrounds package contains a collection of graphics files which\n"
- "can be used as backgrounds in the GNOME Desktop environment. Additionally,\n"
- "the package creates the proper framework and directory structure so that you\n"
- "can add your own files to the collection."
- msgstr ""
- #: gnu/packages/gnome.scm:10087
- msgid "Take pictures of your screen"
- msgstr ""
- #: gnu/packages/gnome.scm:10089
- msgid ""
- "GNOME Screenshot is a utility used for taking screenshots of the entire\n"
- "screen, a window or a user defined area of the screen, with optional\n"
- "beautifying border effects."
- msgstr ""
- #: gnu/packages/gnome.scm:10119
- msgid "Graphical editor for GNOME's dconf configuration system"
- msgstr ""
- #: gnu/packages/gnome.scm:10121
- msgid ""
- "Dconf-editor is a graphical tool for browsing and editing the dconf\n"
- "configuration system for GNOME. It allows users to configure desktop\n"
- "software that do not provide their own configuration interface."
- msgstr ""
- #: gnu/packages/gnome.scm:10149
- msgid "Default MIME type associations for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:10151
- msgid ""
- "Given many installed packages which might handle a given MIME type, a\n"
- "user running the GNOME desktop probably has some preferences: for example,\n"
- "that folders be opened by default by the Nautilus file manager, not the Baobab\n"
- "disk usage analyzer. This package establishes that set of default MIME type\n"
- "associations for GNOME."
- msgstr ""
- #: gnu/packages/gnome.scm:10190
- msgid "GoVirt Library"
- msgstr ""
- #: gnu/packages/gnome.scm:10191
- msgid "GoVirt is a GObject wrapper for the oVirt REST API."
- msgstr ""
- #: gnu/packages/gnome.scm:10251
- msgid "Weather monitoring for GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:10252
- msgid ""
- "GNOME Weather is a small application that allows you to\n"
- "monitor the current weather conditions for your city, or anywhere in the\n"
- "world."
- msgstr ""
- #: gnu/packages/gnome.scm:10353
- msgid "The GNU desktop environment"
- msgstr ""
- #: gnu/packages/gnome.scm:10356
- msgid ""
- "GNOME is the graphical desktop for GNU. It includes a wide variety of\n"
- "applications for browsing the web, editing text and images, creating\n"
- "documents and diagrams, playing media, scanning, and much more."
- msgstr ""
- #: gnu/packages/gnome.scm:10401
- msgid "Desktop recording program"
- msgstr ""
- #: gnu/packages/gnome.scm:10402
- msgid ""
- "Byzanz is a simple desktop recording program with a\n"
- "command-line interface. It can record part or all of an X display for a\n"
- "specified duration and save it as a GIF encoded animated image file."
- msgstr ""
- #: gnu/packages/gnome.scm:10462
- msgid "Two-factor authentication application built for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:10464
- msgid ""
- "Authenticator is a two-factor authentication (2FA) application built for\n"
- "the GNOME desktop environment.\n"
- "\n"
- "Features:\n"
- "\n"
- "@itemize\n"
- "@item QR code scanner\n"
- "@item Beautiful UI\n"
- "@item Huge database of more than 560 supported services\n"
- "@item Keep your PIN tokens secure by locking the application with a password\n"
- "@item Automatically fetch an image for services using their favicon\n"
- "@item The possibility to add new services\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/gnome.scm:10497
- msgid "GObject wrapper for libcanberra"
- msgstr ""
- #: gnu/packages/gnome.scm:10499
- msgid ""
- "GSound is a small library for playing system sounds. It's designed to be\n"
- "used via GObject Introspection, and is a thin wrapper around the libcanberra C\n"
- "library."
- msgstr ""
- #: gnu/packages/gnome.scm:10522
- msgid "Library for accessing SkyDrive and Hotmail"
- msgstr ""
- #: gnu/packages/gnome.scm:10524
- msgid ""
- "Libzapojit is a GLib-based library for accessing online service APIs of\n"
- "Microsoft SkyDrive and Hotmail, using their REST protocols."
- msgstr ""
- #: gnu/packages/gnome.scm:10568
- msgid "GNOME's clock application"
- msgstr ""
- #: gnu/packages/gnome.scm:10570
- msgid ""
- "GNOME Clocks is a simple clocks application designed to fit the GNOME\n"
- "desktop. It supports world clock, stop watch, alarms, and count down timer."
- msgstr ""
- #: gnu/packages/gnome.scm:10615
- msgid "GNOME's calendar application"
- msgstr ""
- #: gnu/packages/gnome.scm:10617
- msgid ""
- "GNOME Calendar is a simple calendar application designed to fit the GNOME\n"
- "desktop. It supports multiple calendars, month, week and year view."
- msgstr ""
- #: gnu/packages/gnome.scm:10677
- msgid "GNOME's ToDo Application"
- msgstr ""
- #: gnu/packages/gnome.scm:10678
- msgid ""
- "GNOME To Do is a simplistic personal task manager designed\n"
- "to perfectly fit the GNOME desktop."
- msgstr ""
- #: gnu/packages/gnome.scm:10718
- msgid "Look up words in dictionary sources"
- msgstr ""
- #: gnu/packages/gnome.scm:10720
- msgid ""
- "GNOME Dictionary can look for the definition or translation of a word in\n"
- "existing databases over the internet."
- msgstr ""
- #: gnu/packages/gnome.scm:10781
- msgid "Customize advanced GNOME 3 options"
- msgstr ""
- #: gnu/packages/gnome.scm:10784
- msgid ""
- "GNOME Tweaks allows adjusting advanced configuration settings in\n"
- "GNOME 3. This includes things like the fonts used in user interface elements,\n"
- "alternative user interface themes, changes in window management behavior,\n"
- "GNOME Shell appearance and extension, etc."
- msgstr ""
- #: gnu/packages/gnome.scm:10811
- msgid "Extensions for GNOME Shell"
- msgstr ""
- #: gnu/packages/gnome.scm:10812
- msgid ""
- "GNOME Shell extensions modify and extend GNOME Shell\n"
- "functionality and behavior."
- msgstr ""
- #: gnu/packages/gnome.scm:10855
- msgid "Library to aggregate data about people"
- msgstr ""
- #: gnu/packages/gnome.scm:10856
- msgid ""
- "Libfolks is a library that aggregates information about people\n"
- "from multiple sources (e.g., Telepathy connection managers for IM contacts,\n"
- "Evolution Data Server for local contacts, libsocialweb for web service contacts,\n"
- "etc.) to create metacontacts. It's written in Vala, which generates C code when\n"
- "compiled."
- msgstr ""
- #: gnu/packages/gnome.scm:10896
- msgid "GLib/GObject wrapper for the Facebook API"
- msgstr ""
- #: gnu/packages/gnome.scm:10897
- msgid ""
- "This library allows you to use the Facebook API from\n"
- "GLib/GObject code."
- msgstr ""
- #: gnu/packages/gnome.scm:10929
- msgid "GNOME keyboard configuration library"
- msgstr ""
- #: gnu/packages/gnome.scm:10931
- msgid ""
- "Libgnomekbd is a keyboard configuration library for the GNOME desktop\n"
- "environment, which can notably display keyboard layouts."
- msgstr ""
- #: gnu/packages/gnome.scm:10965
- msgid "Library for writing single instance applications"
- msgstr ""
- #: gnu/packages/gnome.scm:10967
- msgid ""
- "Libunique is a library for writing single instance applications. If you\n"
- "launch a single instance application twice, the second instance will either just\n"
- "quit or will send a message to the running instance. Libunique makes it easy to\n"
- "write this kind of application, by providing a base class, taking care of all\n"
- "the IPC machinery needed to send messages to a running instance, and also\n"
- "handling the startup notification side."
- msgstr ""
- #: gnu/packages/gnome.scm:11020
- msgid "Desktop calculator"
- msgstr ""
- #: gnu/packages/gnome.scm:11022
- msgid ""
- "Calculator is an application that solves mathematical equations and\n"
- "is suitable as a default application in a Desktop environment."
- msgstr ""
- #: gnu/packages/gnome.scm:11046
- msgid "Virtual sticky note"
- msgstr ""
- #: gnu/packages/gnome.scm:11048
- msgid ""
- "Xpad is a sticky note that strives to be simple, fault tolerant,\n"
- "and customizable. Xpad consists of independent pad windows, each is\n"
- "basically a text box in which notes can be written."
- msgstr ""
- #: gnu/packages/gnome.scm:11119
- msgid "Unicode character picker and font browser"
- msgstr ""
- #: gnu/packages/gnome.scm:11121
- msgid ""
- "This program allows you to browse through all the available Unicode\n"
- "characters and categories for the installed fonts, and to examine their\n"
- "detailed properties. It is an easy way to find the character you might\n"
- "only know by its Unicode name or code point."
- msgstr ""
- #: gnu/packages/gnome.scm:11152
- msgid "Simple color chooser written in GTK3"
- msgstr ""
- #: gnu/packages/gnome.scm:11153
- msgid ""
- "Color Picker is a simple color chooser written in GTK3. It\n"
- "supports both X and Wayland display servers."
- msgstr ""
- #: gnu/packages/gnome.scm:11174
- msgid "Web development studio"
- msgstr ""
- #: gnu/packages/gnome.scm:11176
- msgid ""
- "Bluefish is an editor aimed at programmers and web developers,\n"
- "with many options to write web sites, scripts and other code.\n"
- "Bluefish supports many programming and markup languages."
- msgstr ""
- #: gnu/packages/gnome.scm:11215
- msgid "Process viewer and system resource monitor for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:11217
- msgid ""
- "GNOME System Monitor is a GNOME process viewer and system monitor with\n"
- "an attractive, easy-to-use interface. It has features, such as a tree view\n"
- "for process dependencies, icons for processes, the ability to hide processes,\n"
- "graphical time histories of CPU/memory/swap usage and the ability to\n"
- "kill/reinice processes."
- msgstr ""
- #: gnu/packages/gnome.scm:11254
- msgid "Python client bindings for D-Bus AT-SPI"
- msgstr ""
- #: gnu/packages/gnome.scm:11258
- msgid ""
- "This package includes a python client library for the AT-SPI D-Bus\n"
- "accessibility infrastructure."
- msgstr ""
- #: gnu/packages/gnome.scm:11314
- msgid "Screen reader for individuals who are blind or visually impaired"
- msgstr ""
- #: gnu/packages/gnome.scm:11317
- msgid ""
- "Orca is a screen reader that provides access to the graphical desktop\n"
- "via speech and refreshable braille. Orca works with applications and toolkits\n"
- "that support the Assistive Technology Service Provider Interface (AT-SPI)."
- msgstr ""
- #: gnu/packages/gnome.scm:11376
- msgid "GNOME's alternative spell checker"
- msgstr ""
- #: gnu/packages/gnome.scm:11378
- msgid ""
- "gspell provides a flexible API to add spell-checking to a GTK+\n"
- "application. It provides a GObject API, spell-checking to text entries and\n"
- "text views, and buttons to choose the language."
- msgstr ""
- #: gnu/packages/gnome.scm:11418
- msgid "Project management software for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:11420
- msgid ""
- "GNOME Planner is a project management tool based on the Work Breakdown\n"
- "Structure (WBS). Its goal is to enable you to easily plan projects. Based on\n"
- "the resources, tasks, and constraints that you define, Planner generates\n"
- "various views into a project. For example, Planner can show a Gantt chart of\n"
- "the project. It can show a detailed summary of tasks including their\n"
- "duration, cost, and current progress. It can also show a report of resource\n"
- "utilization that highlights under-utilized and over-utilized resources. These\n"
- "views can be printed as PDF or PostScript files, or exported to HTML."
- msgstr ""
- #: gnu/packages/gnome.scm:11488
- msgid "GNOME music playing application"
- msgstr ""
- #: gnu/packages/gnome.scm:11490
- msgid ""
- "Lollypop is a music player designed to play well with GNOME desktop.\n"
- "Lollypop plays audio formats such as mp3, mp4, ogg and flac and gets information\n"
- "from artists and tracks from the web. It also fetches cover artworks\n"
- "automatically and it can stream songs from online music services and charts."
- msgstr ""
- #: gnu/packages/gnome.scm:11512
- msgid "Video effects for Cheese and other GNOME applications"
- msgstr ""
- #: gnu/packages/gnome.scm:11514
- msgid ""
- "A collection of GStreamer video filters and effects to be used in\n"
- "photo-booth-like software, such as Cheese."
- msgstr ""
- #: gnu/packages/gnome.scm:11580
- msgid "Webcam photo booth software for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:11582
- msgid ""
- "Cheese uses your webcam to take photos and videos. Cheese can also\n"
- "apply fancy special effects and lets you share the fun with others."
- msgstr ""
- #: gnu/packages/gnome.scm:11641
- msgid "Password manager for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:11643
- msgid ""
- "Secrets is a password manager which makes use of the KeePass v4\n"
- "format. It integrates perfectly with the GNOME desktop and provides an easy\n"
- "and uncluttered interface for the management of password databases."
- msgstr ""
- #: gnu/packages/gnome.scm:11693
- msgid "Audio music cd ripper"
- msgstr ""
- #: gnu/packages/gnome.scm:11694
- msgid ""
- "Sound Juicer extracts audio from compact discs and convert it\n"
- "into audio files that a personal computer or digital audio player can play.\n"
- "It supports ripping to any audio codec supported by a GStreamer plugin, such as\n"
- "mp3, Ogg Vorbis and FLAC"
- msgstr ""
- #: gnu/packages/gnome.scm:11744
- msgid "Convert between audio formats with a graphical interface"
- msgstr ""
- #: gnu/packages/gnome.scm:11746
- msgid ""
- "SoundConverter supports converting between many audio formats including\n"
- "Opus, Ogg Vorbis, FLAC and more. It supports parallel conversion, and\n"
- "configurable file renaming."
- msgstr ""
- #: gnu/packages/gnome.scm:11792
- msgid "Tool to help prevent repetitive strain injury (RSI)"
- msgstr ""
- #: gnu/packages/gnome.scm:11794
- msgid ""
- "Workrave is a program that assists in the recovery and prevention of\n"
- "repetitive strain injury (@dfn{RSI}). The program frequently alerts you to take\n"
- "micro-pauses and rest breaks, and restricts you to your daily limit."
- msgstr ""
- #: gnu/packages/gnome.scm:11833
- msgid "GNOME hexadecimal editor"
- msgstr ""
- #: gnu/packages/gnome.scm:11834
- msgid ""
- "The GHex program can view and edit files in two ways:\n"
- "hexadecimal or ASCII. It is useful for editing binary files in general."
- msgstr ""
- #: gnu/packages/gnome.scm:11871
- msgid "Companion library to GObject and Gtk+"
- msgstr ""
- #: gnu/packages/gnome.scm:11872
- msgid ""
- "The libdazzle library is a companion library to GObject and\n"
- "Gtk+. It provides various features that the authors wish were in the\n"
- "underlying library but cannot for various reasons. In most cases, they are\n"
- "wildly out of scope for those libraries. In other cases, they are not quite\n"
- "generic enough to work for everyone."
- msgstr ""
- #: gnu/packages/gnome.scm:11944
- msgid "Manage your email, contacts and schedule"
- msgstr ""
- #: gnu/packages/gnome.scm:11945
- msgid ""
- "Evolution is a personal information management application\n"
- "that provides integrated mail, calendaring and address book\n"
- "functionality."
- msgstr ""
- #: gnu/packages/gnome.scm:12000
- msgid "GNOME image viewer and browser"
- msgstr ""
- #: gnu/packages/gnome.scm:12001
- msgid ""
- "GThumb is an image viewer, browser, organizer, editor and\n"
- "advanced image management tool"
- msgstr ""
- #: gnu/packages/gnome.scm:12072
- msgid "Store and run multiple GNOME terminals in one window"
- msgstr ""
- #: gnu/packages/gnome.scm:12074
- msgid ""
- "Terminator allows you to run multiple GNOME terminals in a grid and\n"
- "tabs, and it supports drag and drop re-ordering of terminals."
- msgstr ""
- #: gnu/packages/gnome.scm:12133
- msgid "Library full of GTK+ widgets for mobile phones"
- msgstr ""
- #: gnu/packages/gnome.scm:12134
- msgid ""
- "The aim of the handy library is to help with developing user\n"
- "interfaces for mobile devices using GTK+. It provides responsive GTK+ widgets\n"
- "for usage on small and big screens."
- msgstr ""
- #: gnu/packages/gnome.scm:12181
- msgid "GLib wrapper around the libgit2 Git access library"
- msgstr ""
- #: gnu/packages/gnome.scm:12182
- msgid ""
- "libgit2-glib is a GLib wrapper library around the libgit2 Git\n"
- "access library. It only implements the core plumbing functions, not really the\n"
- "higher level porcelain stuff."
- msgstr ""
- #: gnu/packages/gnome.scm:12243
- msgid "Graphical user interface for git"
- msgstr "git을 위한 그래픽 사용자 연결장치"
- #: gnu/packages/gnome.scm:12245
- msgid ""
- "gitg is a graphical user interface for git. It aims at being a small,\n"
- "fast and convenient tool to visualize the history of git repositories.\n"
- "Besides visualization, gitg also provides several utilities to manage your\n"
- "repository and commit your work."
- msgstr ""
- #: gnu/packages/gnome.scm:12315
- msgid "File alteration monitor"
- msgstr ""
- #: gnu/packages/gnome.scm:12317
- msgid ""
- "Gamin is a file and directory monitoring system defined to be a subset\n"
- "of the FAM (File Alteration Monitor) system. This is a service provided by a\n"
- "library which detects when a file or a directory has been modified."
- msgstr ""
- #: gnu/packages/gnome.scm:12350
- msgid "Mahjongg tile-matching game"
- msgstr ""
- #: gnu/packages/gnome.scm:12351
- msgid ""
- "GNOME Mahjongg is a game based on the classic Chinese\n"
- "tile-matching game Mahjongg. It features multiple board layouts, tile themes,\n"
- "and a high score table."
- msgstr ""
- #: gnu/packages/gnome.scm:12388
- msgid "GNOME Extra Themes"
- msgstr ""
- #: gnu/packages/gnome.scm:12389
- msgid ""
- "This package provides themes and related elements that don't\n"
- "really fit in other upstream packages. It offers legacy support for GTK+ 2\n"
- "versions of Adwaita, Adwaita-dark and HighContrast themes. It also provides\n"
- "index files needed for Adwaita to be used outside of GNOME."
- msgstr ""
- #: gnu/packages/gnome.scm:12437
- msgid "Note-taking application for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:12438
- msgid ""
- "Gnote is a note-taking application written for the GNOME\n"
- "desktop environment."
- msgstr ""
- #: gnu/packages/gnome.scm:12500
- msgid "Simple IRC Client"
- msgstr ""
- #: gnu/packages/gnome.scm:12502
- msgid ""
- "Polari is a simple Internet Relay Chat (IRC) client that is designed to\n"
- "integrate seamlessly with the GNOME desktop."
- msgstr ""
- #: gnu/packages/gnome.scm:12566
- msgid "View, access, and manage remote and virtual systems"
- msgstr ""
- #: gnu/packages/gnome.scm:12567
- msgid ""
- "GNOME Boxes is a simple application to view, access, and\n"
- "manage remote and virtual systems. Note that this application requires the\n"
- "@code{libvirt} and @code{virtlog} daemons to run. Use the command\n"
- "@command{info '(guix) Virtualization Services'} to learn how to configure\n"
- "these services on the Guix System. If you do not use the\n"
- "@code{gnome-desktop-service-type}, you will also want to extend the\n"
- "@code{polkit-service-type} with the @code{spice-gtk} package, as well as\n"
- "configure the @file{libexec/spice-client-glib-usb-acl-helper} executable of\n"
- "@code{spice-gtk} as setuid, to make it possible to redirect USB devices as a\n"
- "non-privileged user."
- msgstr ""
- #: gnu/packages/gnome.scm:12670
- msgid "GNOME email application built around conversations"
- msgstr ""
- #: gnu/packages/gnome.scm:12672
- msgid ""
- "Geary collects related messages together into conversations,\n"
- "making it easy to find and follow your discussions. Full-text and keyword\n"
- "search makes it easy to find the email you are looking for. Geary's\n"
- "full-featured composer lets you send rich, styled text with images, links, and\n"
- "lists, but also send lightweight, easy to read text messages. Geary\n"
- "automatically picks up your existing GNOME Online Accounts, and adding more is\n"
- "easy. Geary has a clean, fast, modern interface that works like you want it\n"
- "to."
- msgstr ""
- #: gnu/packages/gnome.scm:12715
- msgid "Program for creating labels and business cards"
- msgstr ""
- #: gnu/packages/gnome.scm:12717
- msgid ""
- "gLabels is a program for creating labels and business cards. It is\n"
- "designed to work with various laser/ink-jet peel-off label and business\n"
- "card sheets that you’ll find at most office supply stores."
- msgstr ""
- #: gnu/packages/gnome.scm:12751
- msgid "LaTeX editor for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:12753
- msgid ""
- "GNOME LaTeX is a LaTeX editor for the GNOME desktop. It has features\n"
- "such as build tools, completion of LaTeX commands, structure navigation,\n"
- "symbol tables, document templates, project management, spell-checking, menus\n"
- "and toolbars."
- msgstr ""
- #: gnu/packages/gnome.scm:12808
- msgid "LaTeX editor written in Python with GTK+"
- msgstr ""
- #: gnu/packages/gnome.scm:12810
- msgid ""
- "Setzer is a simple yet full-featured LaTeX editor written in Python with\n"
- "GTK+. It integrates well with the GNOME desktop environment."
- msgstr ""
- #: gnu/packages/gnome.scm:12874
- msgid "Markdown editor written in Python with GTK+"
- msgstr ""
- #: gnu/packages/gnome.scm:12875
- msgid ""
- "Apostrophe is a GTK+ based distraction-free Markdown editor.\n"
- "It uses pandoc as back-end for parsing Markdown."
- msgstr ""
- #: gnu/packages/gnome.scm:12935
- msgid "DBus daemon and utility for configuring gaming mice"
- msgstr ""
- #: gnu/packages/gnome.scm:12936
- msgid ""
- "libratbag provides @command{ratbagd}, a DBus daemon to\n"
- "configure input devices, mainly gaming mice. The daemon provides a generic\n"
- "way to access the various features exposed by these mice and abstracts away\n"
- "hardware-specific and kernel-specific quirks. There is also the\n"
- "@command{ratbagctl} command line interface for configuring devices.\n"
- "\n"
- "libratbag currently supports devices from Logitech, Etekcity, GSkill, Roccat,\n"
- "Steelseries.\n"
- "\n"
- "The ratbagd DBus service can be enabled by adding the following service to\n"
- "your operating-system definition:\n"
- "\n"
- " (simple-service 'ratbagd dbus-root-service-type (list libratbag))"
- msgstr ""
- #: gnu/packages/gnome.scm:13006
- msgid "Configure bindings and LEDs on gaming mice"
- msgstr ""
- #: gnu/packages/gnome.scm:13007
- msgid ""
- "Piper is a GTK+ application for configuring gaming mice with\n"
- "onboard configuration for key bindings via libratbag. Piper requires\n"
- "a @command{ratbagd} daemon running with root privileges. It can be run\n"
- "manually as root, but is preferably configured as a DBus service that can\n"
- "launch on demand. This can be configured by enabling the following service,\n"
- "provided there is a DBus service present:\n"
- "\n"
- " (simple-service 'ratbagd dbus-root-service-type (list libratbag))"
- msgstr ""
- #: gnu/packages/gnome.scm:13068
- msgid "GNOME audio player for transcription"
- msgstr ""
- #: gnu/packages/gnome.scm:13069
- msgid ""
- "Parlatype is an audio player for the GNOME desktop\n"
- "environment. Its main purpose is the manual transcription of spoken\n"
- "audio files."
- msgstr ""
- #: gnu/packages/gnome.scm:13096
- msgid "JSON-RPC library for GLib"
- msgstr ""
- #: gnu/packages/gnome.scm:13097
- msgid ""
- "Jsonrpc-GLib is a library to communicate with JSON-RPC based\n"
- "peers in either a synchronous or asynchronous fashion. It also allows\n"
- "communicating using the GVariant serialization format instead of JSON when\n"
- "both peers support it. You might want that when communicating on a single\n"
- "host to avoid parser overhead and memory-allocator fragmentation."
- msgstr ""
- #: gnu/packages/gnome.scm:13124
- msgid "Haptic/visual/audio feedback via DBus"
- msgstr ""
- #: gnu/packages/gnome.scm:13125
- msgid ""
- "Feedbackd provides a DBus daemon to act on events to provide\n"
- "haptic, visual and audio feedback. It offers the libfeedbackd library and\n"
- "GObject introspection bindings."
- msgstr ""
- #: gnu/packages/gnome.scm:13177
- msgid "System-wide performance profiler for GNU/Linux"
- msgstr ""
- #: gnu/packages/gnome.scm:13179
- msgid ""
- "Sysprof performs detailed, accurate, and fast CPU profiling of an entire\n"
- "GNU/Linux system including the kernel and all user-space applications. This\n"
- "helps find the function(s) in which a program spends most of its time.\n"
- "\n"
- "It uses the kernel's built-in @code{ptrace} feature and handles shared\n"
- "libraries. Applications do not need to be recompiled--or even restarted."
- msgstr ""
- #: gnu/packages/gnome.scm:13280
- msgid "Toolsmith for GNOME-based applications"
- msgstr ""
- #: gnu/packages/gnome.scm:13282
- msgid ""
- "Builder aims to be an integrated development environment (IDE) for\n"
- "writing GNOME-based software. It features fuzzy search, auto-completion,\n"
- "a mini code map, documentation browsing, Git integration, an integrated\n"
- "profiler via Sysprof, debugging support, and more."
- msgstr ""
- #: gnu/packages/gnome.scm:13360
- msgid "Manga reader for GNOME"
- msgstr ""
- #: gnu/packages/gnome.scm:13361
- msgid ""
- "Komikku is an online/offline manga reader for GNOME,\n"
- "developed with the aim of being used with the Librem 5 phone."
- msgstr ""
- #: gnu/packages/gnome.scm:13407
- msgid "Uniform data access"
- msgstr ""
- #: gnu/packages/gnome.scm:13409
- msgid ""
- "GNU Data Access (GDA) is an attempt to provide uniform access to\n"
- "different kinds of data sources (databases, information servers, mail spools,\n"
- "etc). It is a complete architecture that provides all you need to access\n"
- "your data."
- msgstr ""
- #: gnu/packages/gnome.scm:13456
- msgid "Translation making program"
- msgstr ""
- #: gnu/packages/gnome.scm:13458
- msgid ""
- "gtranslator is a quite comfortable gettext po/po.gz/(g)mo files editor\n"
- "for the GNOME 3.x platform with many features. It aims to be a very complete\n"
- "editing environment for translation issues within the GNU gettext/GNOME desktop\n"
- "world."
- msgstr ""
- #: gnu/packages/gnome.scm:13522
- msgid "Complete OCR Suite"
- msgstr ""
- #: gnu/packages/gnome.scm:13523
- msgid ""
- "OCRFeeder is a complete Optical Character Recognition and\n"
- "Document Analysis and Recognition program."
- msgstr ""
- #: gnu/packages/gnome.scm:13560
- msgid "Building blocks for GNOME applications"
- msgstr ""
- #: gnu/packages/gnome.scm:13562
- msgid ""
- "@code{libadwaita} offers widgets and objects to build GNOME\n"
- "applications scaling from desktop workstations to mobile phones. It is the\n"
- "successor of @code{libhandy} for GTK4."
- msgstr ""
- #: gnu/packages/gnome.scm:13586
- msgid "Power management daemon for the GNOME desktop"
- msgstr ""
- #: gnu/packages/gnome.scm:13587
- msgid ""
- "@code{gnome-power-manager} is a tool for viewing present and\n"
- "historical battery usage and related statistics."
- msgstr ""
- #: gnu/packages/gnome.scm:13630
- msgid "File manager"
- msgstr ""
- #: gnu/packages/gnome.scm:13631
- msgid "This package provides a graphical file manager."
- msgstr "이 꾸러미는 그래픽 파일 관리자를 제공합니다."
- #: gnu/packages/gnuzilla.scm:217
- msgid "Mozilla JavaScript engine"
- msgstr ""
- #: gnu/packages/gnuzilla.scm:218
- msgid ""
- "SpiderMonkey is Mozilla's JavaScript engine written\n"
- "in C/C++."
- msgstr ""
- #: gnu/packages/gnuzilla.scm:1093
- msgid "Entirely free browser derived from Mozilla Firefox"
- msgstr ""
- #: gnu/packages/gnuzilla.scm:1095
- msgid ""
- "IceCat is the GNU version of the Firefox browser. It is entirely free\n"
- "software, which does not recommend non-free plugins and addons. It also\n"
- "features built-in privacy-protecting features. This package also includes the\n"
- "@command{geckodriver} command, which can be useful for automated web\n"
- "testing.\n"
- "\n"
- "WARNING: IceCat 102 has not yet been released by the upstream IceCat project.\n"
- "This is a preview release, and does not currently meet the privacy-respecting\n"
- "standards of the IceCat project."
- msgstr ""
- #: gnu/packages/gnuzilla.scm:1542
- msgid "Rebranded Mozilla Thunderbird email client"
- msgstr ""
- #: gnu/packages/gnuzilla.scm:1544
- msgid ""
- "This package provides an email client built based on Mozilla\n"
- "Thunderbird. It supports email, news feeds, chat, calendar and contacts."
- msgstr ""
- #: gnu/packages/gnuzilla.scm:1804
- msgid "Tool to extract passwords from Mozilla profiles"
- msgstr ""
- #: gnu/packages/gnuzilla.scm:1805
- msgid ""
- "Firefox Decrypt is a tool to extract passwords from\n"
- "Mozilla (Firefox, Waterfox, Thunderbird, SeaMonkey) profiles."
- msgstr ""
- #: gnu/packages/gnuzilla.scm:1840
- msgid "C decompress tool for mozilla lz4json format"
- msgstr ""
- #: gnu/packages/gnuzilla.scm:1842
- msgid ""
- "@code{lz4json} is a little utility to unpack lz4json files as generated\n"
- "by Firefox's bookmark backups and session restore. This is a different format\n"
- "from what the normal lz4 utility expects. The data is dumped to stdout."
- msgstr ""
- #: gnu/packages/gtk.scm:153
- msgid "Application Menu applet"
- msgstr ""
- #: gnu/packages/gtk.scm:155
- msgid ""
- "This package provides a global menu applet for use with desktop panels\n"
- "such as mate-panel and xfce4-panel."
- msgstr ""
- #: gnu/packages/gtk.scm:187
- msgid "GNOME accessibility toolkit"
- msgstr ""
- #: gnu/packages/gtk.scm:189
- msgid ""
- "ATK provides the set of accessibility interfaces that are implemented\n"
- "by other toolkits and applications. Using the ATK interfaces, accessibility\n"
- "tools have full access to view and control running applications."
- msgstr ""
- #: gnu/packages/gtk.scm:255
- msgid "Multi-platform 2D graphics library"
- msgstr ""
- #: gnu/packages/gtk.scm:256
- msgid ""
- "Cairo is a 2D graphics library with support for multiple output\n"
- "devices. Currently supported output targets include the X Window System (via\n"
- "both Xlib and XCB), Quartz, Win32, image buffers, PostScript, PDF, and SVG file\n"
- "output. Experimental backends include OpenGL, BeOS, OS/2, and DirectFB."
- msgstr ""
- #: gnu/packages/gtk.scm:283
- msgid "2D graphics library (with X11 support)"
- msgstr ""
- #: gnu/packages/gtk.scm:316
- msgid "OpenType text shaping engine"
- msgstr ""
- #: gnu/packages/gtk.scm:318
- msgid "HarfBuzz is an OpenType text shaping engine."
- msgstr ""
- #: gnu/packages/gtk.scm:387
- msgid "Double-Array Trie Library"
- msgstr ""
- #: gnu/packages/gtk.scm:388
- msgid ""
- "Libdatrie is an implementation of double-array structure for\n"
- "representing trie. Trie is a kind of digital search tree."
- msgstr ""
- #: gnu/packages/gtk.scm:419
- msgid "Thai language support library"
- msgstr ""
- #: gnu/packages/gtk.scm:420
- msgid ""
- "LibThai is a set of Thai language support routines aimed to\n"
- "ease developers’ tasks to incorporate Thai language support in their\n"
- "applications."
- msgstr ""
- #: gnu/packages/gtk.scm:474
- msgid "Text and font handling library"
- msgstr ""
- #: gnu/packages/gtk.scm:475
- msgid ""
- "Pango is a library for laying out and rendering of text, with\n"
- "an emphasis on internationalization. Pango can be used anywhere that text\n"
- "layout is needed, though most of the work on Pango so far has been done in the\n"
- "context of the GTK+ widget toolkit. Pango forms the core of text and font\n"
- "handling for GTK+-2.x."
- msgstr ""
- #: gnu/packages/gtk.scm:567
- msgid "Obsolete pango functions"
- msgstr ""
- #: gnu/packages/gtk.scm:568
- msgid ""
- "Pangox was a X backend to pango. It is now obsolete and no\n"
- "longer provided by recent pango releases. pangox-compat provides the\n"
- "functions which were removed."
- msgstr ""
- #: gnu/packages/gtk.scm:603
- msgid "GTK+ widget for interactive graph-like environments"
- msgstr ""
- #: gnu/packages/gtk.scm:605
- msgid ""
- "Ganv is an interactive GTK+ widget for interactive “boxes and lines” or\n"
- "graph-like environments, e.g. modular synths or finite state machine\n"
- "diagrams."
- msgstr ""
- #: gnu/packages/gtk.scm:659
- msgid "Widget that extends the standard GTK+ 2.x 'GtkTextView' widget"
- msgstr ""
- #: gnu/packages/gtk.scm:661
- msgid ""
- "GtkSourceView is a portable C library that extends the standard GTK+\n"
- "framework for multiline text editing with support for configurable syntax\n"
- "highlighting, unlimited undo/redo, search and replace, a completion framework,\n"
- "printing and other features typical of a source code editor."
- msgstr ""
- #: gnu/packages/gtk.scm:718
- msgid "GNOME source code widget"
- msgstr ""
- #: gnu/packages/gtk.scm:719
- msgid ""
- "GtkSourceView is a text widget that extends the standard\n"
- "GTK+ text widget GtkTextView. It improves GtkTextView by implementing syntax\n"
- "highlighting and other features typical of a source code editor."
- msgstr ""
- #: gnu/packages/gtk.scm:843
- msgid "Image loading library"
- msgstr ""
- #: gnu/packages/gtk.scm:844
- msgid ""
- "GdkPixbuf is a library that loads image data in various\n"
- "formats and stores it as linear buffers in memory. The buffers can then be\n"
- "scaled, composited, modified, saved, or rendered."
- msgstr ""
- #: gnu/packages/gtk.scm:869
- msgid "Deprecated Xlib integration for GdkPixbuf"
- msgstr ""
- #: gnu/packages/gtk.scm:871
- msgid ""
- "GdkPixbuf-Xlib contains the deprecated API for integrating GdkPixbuf with\n"
- "Xlib data types. This library was originally shipped by gdk-pixbuf, and has\n"
- "since been moved out of the original repository. No newly written code should\n"
- "ever use this library."
- msgstr ""
- #: gnu/packages/gtk.scm:918
- msgid "Assistive Technology Service Provider Interface, core components"
- msgstr ""
- #: gnu/packages/gtk.scm:920
- msgid ""
- "The Assistive Technology Service Provider Interface, core components,\n"
- "is part of the GNOME accessibility project."
- msgstr ""
- #: gnu/packages/gtk.scm:999
- msgid "Assistive Technology Service Provider Interface, ATK bindings"
- msgstr ""
- #: gnu/packages/gtk.scm:1001
- msgid ""
- "The Assistive Technology Service Provider Interface\n"
- "is part of the GNOME accessibility project."
- msgstr ""
- #: gnu/packages/gtk.scm:1093
- msgid "Cross-platform toolkit for creating graphical user interfaces"
- msgstr ""
- #: gnu/packages/gtk.scm:1095
- msgid ""
- "GTK+, or the GIMP Toolkit, is a multi-platform toolkit for creating\n"
- "graphical user interfaces. Offering a complete set of widgets, GTK+ is\n"
- "suitable for projects ranging from small one-off tools to complete\n"
- "application suites."
- msgstr ""
- #: gnu/packages/gtk.scm:1427
- msgid "Cross-platform widget toolkit"
- msgstr ""
- #: gnu/packages/gtk.scm:1428
- msgid ""
- "GTK is a multi-platform toolkit for creating graphical user\n"
- "interfaces. Offering a complete set of widgets, GTK is suitable for projects\n"
- "ranging from small one-off tools to complete application suites."
- msgstr ""
- #: gnu/packages/gtk.scm:1500
- msgid "Cairo bindings for GNU Guile"
- msgstr ""
- #: gnu/packages/gtk.scm:1502
- msgid ""
- "Guile-Cairo wraps the Cairo graphics library for Guile Scheme.\n"
- "Guile-Cairo is complete, wrapping almost all of the Cairo API. It is API\n"
- "stable, providing a firm base on which to do graphics work. Finally, and\n"
- "importantly, it is pleasant to use. You get a powerful and well-maintained\n"
- "graphics library with all of the benefits of Scheme: memory management,\n"
- "exceptions, macros, and a dynamic programming environment."
- msgstr ""
- #: gnu/packages/gtk.scm:1581
- msgid "Render SVG images using Cairo from Guile"
- msgstr ""
- #: gnu/packages/gtk.scm:1583
- msgid ""
- "Guile-RSVG wraps the RSVG library for Guile, allowing you to render SVG\n"
- "images onto Cairo surfaces."
- msgstr ""
- #: gnu/packages/gtk.scm:1648
- msgid "Create SVG or PDF presentations in Guile"
- msgstr ""
- #: gnu/packages/gtk.scm:1650
- msgid ""
- "Guile-Present defines a declarative vocabulary for presentations,\n"
- "together with tools to render presentation documents as SVG or PDF.\n"
- "Guile-Present can be used to make presentations programmatically, but also\n"
- "includes a tools to generate PDF presentations out of Org mode and Texinfo\n"
- "documents."
- msgstr ""
- #: gnu/packages/gtk.scm:1714
- msgid "Guile interface for GTK+ programming for GNOME"
- msgstr ""
- #: gnu/packages/gtk.scm:1716
- msgid ""
- "Includes guile-clutter, guile-gnome-gstreamer,\n"
- "guile-gnome-platform (GNOME developer libraries), and guile-gtksourceview."
- msgstr ""
- #: gnu/packages/gtk.scm:1769
- msgid "C++ bindings to the Cairo 2D graphics library"
- msgstr ""
- #: gnu/packages/gtk.scm:1771
- msgid ""
- "Cairomm provides a C++ programming interface to the Cairo 2D graphics\n"
- "library."
- msgstr ""
- #: gnu/packages/gtk.scm:1834
- msgid "C++ interface to the Pango text rendering library"
- msgstr ""
- #: gnu/packages/gtk.scm:1836
- msgid ""
- "Pangomm provides a C++ programming interface to the Pango text rendering\n"
- "library."
- msgstr ""
- #: gnu/packages/gtk.scm:1897
- msgid "C++ bindings for ATK"
- msgstr ""
- #: gnu/packages/gtk.scm:1898
- msgid "ATKmm is the C++ binding for the ATK library."
- msgstr ""
- #: gnu/packages/gtk.scm:1978
- msgid "C++ Interfaces for GTK+ and GNOME"
- msgstr ""
- #: gnu/packages/gtk.scm:1979
- msgid ""
- "GTKmm is the official C++ interface for the popular GUI\n"
- "library GTK+. Highlights include typesafe callbacks, and a comprehensive set\n"
- "of widgets that are easily extensible via inheritance. You can create user\n"
- "interfaces either in code or with the Glade User Interface designer, using\n"
- "libglademm. There's extensive documentation, including API reference and a\n"
- "tutorial."
- msgstr ""
- #: gnu/packages/gtk.scm:2052
- msgid "C++ interface to the GTK+ 'GtkTextView' widget"
- msgstr ""
- #: gnu/packages/gtk.scm:2054
- msgid ""
- "gtksourceviewmm is a portable C++ library that extends the standard GTK+\n"
- "framework for multiline text editing with support for configurable syntax\n"
- "highlighting, unlimited undo/redo, search and replace, a completion framework,\n"
- "printing and other features typical of a source code editor."
- msgstr ""
- #: gnu/packages/gtk.scm:2083
- msgid "Python bindings for cairo"
- msgstr ""
- #: gnu/packages/gtk.scm:2085
- msgid "Pycairo is a set of Python bindings for the Cairo graphics library."
- msgstr ""
- #: gnu/packages/gtk.scm:2108
- msgid "Perl interface to the cairo 2d vector graphics library"
- msgstr ""
- #: gnu/packages/gtk.scm:2109
- msgid ""
- "Cairo provides Perl bindings for the vector graphics library\n"
- "cairo. It supports multiple output targets, including PNG, PDF and SVG. Cairo\n"
- "produces identical output on all those targets."
- msgstr ""
- #: gnu/packages/gtk.scm:2131
- msgid "Integrate Cairo into the Glib type system"
- msgstr ""
- #: gnu/packages/gtk.scm:2132
- msgid ""
- "Cairo::GObject registers Cairo's types with Glib's type systems,\n"
- "so that they can be used normally in signals and properties."
- msgstr ""
- #: gnu/packages/gtk.scm:2165
- msgid "Perl interface to the 2.x series of the Gimp Toolkit library"
- msgstr ""
- #: gnu/packages/gtk.scm:2166
- msgid ""
- "Perl bindings to the 2.x series of the Gtk+ widget set.\n"
- "This module allows you to write graphical user interfaces in a Perlish and\n"
- "object-oriented way, freeing you from the casting and memory management in C,\n"
- "yet remaining very close in spirit to original API."
- msgstr ""
- #: gnu/packages/gtk.scm:2204
- msgid "Perl interface to the 3.x series of the gtk+ toolkit"
- msgstr ""
- #: gnu/packages/gtk.scm:2205
- msgid ""
- "Perl bindings to the 3.x series of the gtk+ toolkit.\n"
- "This module allows you to write graphical user interfaces in a Perlish and\n"
- "object-oriented way, freeing you from the casting and memory management in C,\n"
- "yet remaining very close in spirit to original API."
- msgstr ""
- #: gnu/packages/gtk.scm:2230
- msgid "Layout and render international text"
- msgstr ""
- #: gnu/packages/gtk.scm:2231
- msgid ""
- "Pango is a library for laying out and rendering text, with an\n"
- "emphasis on internationalization. Pango can be used anywhere that text layout\n"
- "is needed, but using Pango in conjunction with Cairo and/or Gtk2 provides a\n"
- "complete solution with high quality text handling and graphics rendering.\n"
- "\n"
- "Dynamically loaded modules handle text layout for particular combinations of\n"
- "script and font backend. Pango provides a wide selection of modules, including\n"
- "modules for Hebrew, Arabic, Hangul, Thai, and a number of Indic scripts.\n"
- "Virtually all of the world's major scripts are supported.\n"
- "\n"
- "In addition to the low level layout rendering routines, Pango includes\n"
- "@code{Pango::Layout}, a high level driver for laying out entire blocks of text,\n"
- "and routines to assist in editing internationalized text."
- msgstr ""
- #: gnu/packages/gtk.scm:2285
- msgid "Library for minimalistic gtk+3 user interfaces"
- msgstr ""
- #: gnu/packages/gtk.scm:2286
- msgid ""
- "Girara is a library that implements a user interface that\n"
- "focuses on simplicity and minimalism. Currently based on GTK+, a\n"
- "cross-platform widget toolkit, it provides an interface that focuses on three\n"
- "main components: a so-called view widget that represents the actual\n"
- "application, an input bar that is used to execute commands of the\n"
- "application and the status bar which provides the user with current\n"
- "information."
- msgstr ""
- #: gnu/packages/gtk.scm:2365
- msgid "GTK+ DocBook Documentation Generator"
- msgstr ""
- #: gnu/packages/gtk.scm:2366
- msgid ""
- "GtkDoc is a tool used to extract API documentation from C-code\n"
- "like Doxygen, but handles documentation of GObject (including signals and\n"
- "properties) that makes it very suitable for GTK+ apps and libraries. It uses\n"
- "docbook for intermediate files and can produce html by default and pdf/man-pages\n"
- "with some extra work."
- msgstr ""
- #: gnu/packages/gtk.scm:2411
- msgid "Theming engines for GTK+ 2.x"
- msgstr ""
- #: gnu/packages/gtk.scm:2413
- msgid ""
- "This package contains the standard GTK+ 2.x theming engines including\n"
- "Clearlooks, Crux, High Contrast, Industrial, LighthouseBlue, Metal, Mist,\n"
- "Redmond95 and ThinIce."
- msgstr ""
- #: gnu/packages/gtk.scm:2440
- msgid "Cairo-based theming engine for GTK+ 2.x"
- msgstr ""
- #: gnu/packages/gtk.scm:2442
- msgid ""
- "Murrine is a cairo-based GTK+ theming engine. It is named after the\n"
- "glass artworks done by Venicians glass blowers."
- msgstr ""
- #: gnu/packages/gtk.scm:2465
- msgid "Spell-checking addon for GTK's TextView widget"
- msgstr ""
- #: gnu/packages/gtk.scm:2467
- msgid ""
- "GtkSpell provides word-processor-style highlighting and replacement of\n"
- "misspelled words in a GtkTextView widget."
- msgstr ""
- #: gnu/packages/gtk.scm:2490
- msgid "Lightweight GTK+ clipboard manager"
- msgstr ""
- #: gnu/packages/gtk.scm:2492
- msgid ""
- "ClipIt is a clipboard manager with features such as a history, search\n"
- "thereof, global hotkeys and clipboard item actions. It was forked from\n"
- "Parcellite and adds bugfixes and features."
- msgstr ""
- #: gnu/packages/gtk.scm:2528
- msgid "Thin layer of graphic data types"
- msgstr ""
- #: gnu/packages/gtk.scm:2529
- msgid ""
- "Graphene provides graphic types and their relative API; it\n"
- "does not deal with windowing system surfaces, drawing, scene graphs, or input."
- msgstr ""
- #: gnu/packages/gtk.scm:2553
- msgid "Gtk+ widget for dealing with 2-D tabular data"
- msgstr ""
- #: gnu/packages/gtk.scm:2555
- msgid ""
- "GNU Spread Sheet Widget is a library for Gtk+ which provides a widget for\n"
- "viewing and manipulating 2 dimensional tabular data in a manner similar to many\n"
- "popular spread sheet programs."
- msgstr ""
- #: gnu/packages/gtk.scm:2580
- msgid "Simple mixer application designed to run in system tray"
- msgstr ""
- #: gnu/packages/gtk.scm:2582
- msgid ""
- "PNMixer is a simple mixer application designed to run in system tray.\n"
- "It integrates nicely into desktop environments that don't have a panel that\n"
- "supports applets and therefore can't run a mixer applet. In particular, it's\n"
- "been used quite a lot with fbpanel and tint2 but should run fine in any system\n"
- "tray.\n"
- "\n"
- "PNMixer is designed to work on systems that use ALSA for sound management.\n"
- "Any other sound driver like OSS or FFADO are, currently, not supported. There\n"
- "is no official PulseAudio support, at the moment, but it seems that PNMixer\n"
- "behaves quite well anyway when PA is running."
- msgstr ""
- #: gnu/packages/gtk.scm:2614
- msgid "System tray volume applet"
- msgstr ""
- #: gnu/packages/gtk.scm:2616
- msgid ""
- "Volume Icon is a volume indicator and control applet for @acronym{the\n"
- "Advanced Linux Sound Architecture, ALSA}. It sits in the system tray,\n"
- "independent of your desktop environment, and supports global key bindings."
- msgstr ""
- #: gnu/packages/gtk.scm:2655
- msgid "GTK+ dialog boxes for shell scripts"
- msgstr ""
- #: gnu/packages/gtk.scm:2657
- msgid ""
- "This program allows you to display GTK+ dialog boxes from command line or\n"
- "shell scripts. Example of how to use @code{yad} can be consulted at\n"
- "@url{https://sourceforge.net/p/yad-dialog/wiki/browse_pages/}."
- msgstr ""
- #: gnu/packages/gtk.scm:2687
- msgid "Drag and drop source/target for X"
- msgstr ""
- #: gnu/packages/gtk.scm:2689
- msgid ""
- "Dragon is a lightweight drag-and-drop source for X where you can run:\n"
- "\n"
- "@example\n"
- "dragon file.tar.gz\n"
- "@end example\n"
- "\n"
- "to get a window with just that file in it, ready to be dragged where you need it.\n"
- "What if you need to drag into something? Using:\n"
- "\n"
- "@example\n"
- "dragon --target\n"
- "@end example\n"
- "\n"
- "you get a window you can drag files and text into. Dropped items are\n"
- "printed to standard output."
- msgstr ""
- #: gnu/packages/gtk.scm:2780
- msgid "Library for passing menus over DBus"
- msgstr ""
- #: gnu/packages/gtk.scm:2781
- msgid ""
- "@code{libdbusmenu} passes a menu structure across DBus so\n"
- "that a program can create a menu simply without worrying about how it is\n"
- "displayed on the other side of the bus."
- msgstr ""
- #: gnu/packages/gtk.scm:2806
- msgid ""
- "Library to create Wayland desktop components using the Layer\n"
- "Shell protocol"
- msgstr ""
- #: gnu/packages/gtk.scm:2808
- msgid ""
- "Layer Shell is a Wayland protocol for desktop shell\n"
- "components, such as panels, notifications and wallpapers. It can be used to\n"
- "anchor windows to a corner or edge of the output, or stretch them across the\n"
- "entire output. It supports all Layer Shell features including popups and\n"
- "popovers."
- msgstr ""
- #: gnu/packages/gtk.scm:2852
- msgid "Canvas widget for GTK+"
- msgstr ""
- #: gnu/packages/gtk.scm:2853
- msgid ""
- "GooCanvas is a canvas widget for GTK+ that uses the cairo 2D\n"
- "library for drawing."
- msgstr ""
- #: gnu/packages/gtk.scm:2910
- msgid "Spreadsheet widget for GTK+"
- msgstr ""
- #: gnu/packages/gtk.scm:2911
- msgid ""
- "GtkSheet is a matrix widget for GTK+. It consists of an\n"
- "scrollable grid of cells where you can allocate text. Cell contents can be\n"
- "edited interactively through a specially designed entry, GtkItemEntry. It is\n"
- "also a container subclass, allowing you to display buttons, images and any\n"
- "other widget in it. You can also set many attributes such as border,\n"
- "foreground and background colors, text justification and more."
- msgstr ""
- #: gnu/packages/gtk.scm:2943
- msgid "Display widget for dynamic data"
- msgstr ""
- #: gnu/packages/gtk.scm:2944
- msgid ""
- "GtkDatabox is a widget for live display of large amounts of\n"
- "fluctuating numerical data. It enables data presentation (for example, on\n"
- "linear or logarithmic scales, as dots or lines, with markers/labels) as well as\n"
- "user interaction (e.g. measuring distances)."
- msgstr ""
- #: gnu/packages/gtk.scm:2983
- msgid "Per-application volume control and on-screen display"
- msgstr ""
- #: gnu/packages/gtk.scm:2984
- msgid ""
- "Volctl is a PulseAudio-enabled tray icon volume control and\n"
- "OSD applet for graphical desktops. It's not meant to be an replacement for a\n"
- "full-featured mixer application. If you're looking for that check out the\n"
- "excellent pavucontrol."
- msgstr ""
- #: gnu/packages/gtk.scm:3011
- msgid "On-screen annotation tool"
- msgstr ""
- #: gnu/packages/gtk.scm:3013
- msgid ""
- "Gromit-MPX is an on-screen annotation tool that works with any\n"
- "Unix desktop environment under X11 as well as Wayland."
- msgstr ""
- #: gnu/packages/gtk.scm:3039
- msgid "WebP GdkPixbuf loader library"
- msgstr ""
- #: gnu/packages/gtk.scm:3040
- msgid "Webp-pixbuf-loader is a WebP format loader of GdkPixbuf."
- msgstr ""
- #: gnu/packages/guile.scm:136 gnu/packages/guile.scm:239
- msgid "Scheme implementation intended especially for extensions"
- msgstr ""
- #: gnu/packages/guile.scm:138 gnu/packages/guile.scm:241
- msgid ""
- "Guile is the GNU Ubiquitous Intelligent Language for Extensions, the\n"
- "official extension language of the GNU system. It is an implementation of\n"
- "the Scheme language which can be easily embedded in other applications to\n"
- "provide a convenient means of extending the functionality of the application\n"
- "without requiring the source code to be rewritten."
- msgstr ""
- #: gnu/packages/guile.scm:484
- msgid "Development version of GNU Guile"
- msgstr ""
- #: gnu/packages/guile.scm:536
- msgid "Line editing support for GNU Guile"
- msgstr ""
- #: gnu/packages/guile.scm:538
- msgid ""
- "This module provides line editing support via the Readline library for\n"
- "GNU@tie{}Guile. Use the @code{(ice-9 readline)} module and call its\n"
- "@code{activate-readline} procedure to enable it."
- msgstr ""
- #: gnu/packages/guile.scm:638
- msgid "JSON module for Guile"
- msgstr ""
- #: gnu/packages/guile.scm:640
- msgid ""
- "Guile-JSON supports parsing and building JSON documents according to the\n"
- "specification. These are the main features:\n"
- "\n"
- "@itemize\n"
- "@item Strictly complies to @uref{http://json.org, specification}.\n"
- "@item Build JSON documents programmatically via macros.\n"
- "@item Unicode support for strings.\n"
- "@item Allows JSON pretty printing.\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/guile.scm:735
- msgid "Guile bindings to the GDBM library via Guile's FFI"
- msgstr ""
- #: gnu/packages/guile.scm:737
- msgid ""
- "Guile bindings to the GDBM key-value storage system, using\n"
- "Guile's foreign function interface."
- msgstr ""
- #: gnu/packages/guile.scm:764
- msgid "Access SQLite databases from Guile"
- msgstr ""
- #: gnu/packages/guile.scm:766
- msgid "This package provides Guile bindings to the SQLite database system."
- msgstr ""
- #: gnu/packages/guile.scm:803
- msgid "Structured access to bytevector contents for Guile"
- msgstr ""
- #: gnu/packages/guile.scm:805
- msgid ""
- "Guile bytestructures offers a system imitating the type system\n"
- "of the C programming language, to be used on bytevectors. C's type\n"
- "system works on raw memory, and Guile works on bytevectors which are\n"
- "an abstraction over raw memory. It's also more powerful than the C\n"
- "type system, elevating types to first-class status."
- msgstr ""
- #: gnu/packages/guile.scm:855
- msgid "Guile bindings for libgit2"
- msgstr ""
- #: gnu/packages/guile.scm:857
- msgid ""
- "This package provides Guile bindings to libgit2, a library to\n"
- "manipulate repositories of the Git version control system."
- msgstr ""
- #: gnu/packages/guile.scm:891
- msgid "Guile bindings to zlib"
- msgstr ""
- #: gnu/packages/guile.scm:893
- msgid ""
- "This package provides Guile bindings for zlib, a lossless\n"
- "data-compression library. The bindings are written in pure Scheme by using\n"
- "Guile's foreign function interface."
- msgstr ""
- #: gnu/packages/guile.scm:922
- msgid "Guile bindings to lzlib"
- msgstr ""
- #: gnu/packages/guile.scm:924
- msgid ""
- "This package provides Guile bindings for lzlib, a C library for\n"
- "in-memory LZMA compression and decompression. The bindings are written in\n"
- "pure Scheme by using Guile's foreign function interface."
- msgstr ""
- #: gnu/packages/guile.scm:949
- msgid "GNU Guile bindings to the zstd compression library"
- msgstr ""
- #: gnu/packages/guile.scm:951
- msgid ""
- "This package provides a GNU Guile interface to the zstd (``zstandard'')\n"
- "compression library."
- msgstr ""
- #: gnu/packages/guile.scm:972
- msgid "Guile bindings for liblzma (XZ)"
- msgstr ""
- #: gnu/packages/guile.scm:973
- msgid ""
- "Guile-LZMA is a Guile wrapper for the liblzma (XZ)\n"
- "library. It exposes an interface similar to other Guile compression\n"
- "libraries, like Guile-zlib."
- msgstr ""
- #: gnu/packages/imagemagick.scm:135 gnu/packages/imagemagick.scm:262
- msgid "Create, edit, compose, or convert bitmap images"
- msgstr ""
- #: gnu/packages/imagemagick.scm:137
- msgid ""
- "ImageMagick is a software suite to create, edit, compose, or convert\n"
- "bitmap images. It can read and write images in a variety of formats (over 100)\n"
- "including DPX, EXR, GIF, JPEG, JPEG-2000, PDF, PhotoCD, PNG, Postscript, SVG,\n"
- "and TIFF. Use ImageMagick to resize, flip, mirror, rotate, distort, shear and\n"
- "transform images, adjust image colors, apply various special effects, or draw\n"
- "text, lines, polygons, ellipses and Bézier curves."
- msgstr ""
- #: gnu/packages/imagemagick.scm:205
- msgid "Perl interface to ImageMagick"
- msgstr ""
- #: gnu/packages/imagemagick.scm:206
- msgid ""
- "This Perl extension allows the reading, manipulation and\n"
- "writing of a large number of image file formats using the ImageMagick library.\n"
- "Use it to create, edit, compose, or convert bitmap images from within a Perl\n"
- "script."
- msgstr ""
- #: gnu/packages/imagemagick.scm:264
- msgid ""
- "GraphicsMagick provides a comprehensive collection of utilities,\n"
- "programming interfaces, and GUIs, to support file format conversion, image\n"
- "processing, and 2D vector rendering."
- msgstr ""
- #: gnu/packages/image.scm:142
- msgid "Image Quality Assessment"
- msgstr ""
- #: gnu/packages/image.scm:143
- msgid ""
- "IQA is a C library for objectively measuring image/video\n"
- "quality. It implements many popular algorithms, such as MS-SSIM, MS-SSIM*,\n"
- "SIMM, MSE, and PSNR. It is designed to be fast, accurate, and reliable. All\n"
- "code is Valgrind-clean and unit tested."
- msgstr ""
- #: gnu/packages/image.scm:174
- msgid "Library for handling PNG files"
- msgstr ""
- #: gnu/packages/image.scm:176
- msgid ""
- "Libpng is the official PNG (Portable Network Graphics) reference\n"
- "library. It supports almost all PNG features and is extensible."
- msgstr ""
- #: gnu/packages/image.scm:236
- msgid "APNG patch for libpng"
- msgstr ""
- #: gnu/packages/image.scm:238
- msgid ""
- "APNG (Animated Portable Network Graphics) is an unofficial\n"
- "extension of the APNG (Portable Network Graphics) format.\n"
- "APNG patch provides APNG support to libpng."
- msgstr ""
- #: gnu/packages/image.scm:273
- msgid "Utility to compress PNG files"
- msgstr ""
- #: gnu/packages/image.scm:274
- msgid ""
- "Pngcrush optimizes @acronym{PNG, Portable Network Graphics}\n"
- "images. It can further losslessly compress them by as much as 40%."
- msgstr ""
- #: gnu/packages/image.scm:328
- msgid "Pretty small png library"
- msgstr ""
- #: gnu/packages/image.scm:329
- msgid ""
- "A pretty small png library.\n"
- "Currently all documentation resides in @file{pnglite.h}."
- msgstr ""
- #: gnu/packages/image.scm:350
- msgid "Image palette quantization library"
- msgstr ""
- #: gnu/packages/image.scm:351
- msgid ""
- "libimagequant is a small, portable C library for\n"
- "high-quality conversion of RGBA images to 8-bit indexed-color (palette)\n"
- "images. This library can significantly reduces file sizes and powers pngquant\n"
- "and other PNG optimizers."
- msgstr ""
- #: gnu/packages/image.scm:380
- msgid "Utility and library for lossy compressing PNG images"
- msgstr ""
- #: gnu/packages/image.scm:381
- msgid ""
- "pngquant is a PNG compressor that significantly reduces file\n"
- "sizes by converting images to a more efficient 8-bit PNG format with alpha\n"
- "channel (often 60-80% smaller than 24/32-bit PNG files). Compressed images\n"
- "are fully standards-compliant and are supported by all web browsers and\n"
- "operating systems.\n"
- "\n"
- "Features:\n"
- "@enumerate\n"
- "@item High-quality palette generation using a combination of vector\n"
- " quantization algorithms.\n"
- "@item Unique adaptive dithering algorithm that adds less noise to images\n"
- " than the standard Floyd-Steinberg.\n"
- "@item Easy to integrate with shell scripts, GUIs and server-side software.\n"
- "@item Fast mode for real-time processing/large numbers of images.\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/image.scm:409
- msgid "Library for handling JPEG files"
- msgstr ""
- #: gnu/packages/image.scm:411
- msgid ""
- "Libjpeg implements JPEG image encoding, decoding, and transcoding.\n"
- "JPEG is a standardized compression method for full-color and gray-scale\n"
- "images.\n"
- "It also includes programs that provide conversion between the JPEG format and\n"
- "image files in PBMPLUS PPM/PGM, GIF, BMP, and Targa file formats, as well as\n"
- "lossless JPEG manipulations such as rotation, scaling or cropping:\n"
- "@enumerate\n"
- "@item cjpeg\n"
- "@item djpeg\n"
- "@item jpegtran\n"
- "@item rdjpgcom\n"
- "@item wrjpgcom\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/image.scm:504
- msgid "Implementation of the JPEG XR standard"
- msgstr ""
- #: gnu/packages/image.scm:505
- msgid ""
- "JPEG XR is an approved ISO/IEC International standard (its\n"
- "official designation is ISO/IEC 29199-2). This library is an implementation of that standard."
- msgstr ""
- #: gnu/packages/image.scm:530
- msgid "Optimize JPEG images"
- msgstr ""
- #: gnu/packages/image.scm:532
- msgid ""
- "jpegoptim provides lossless optimization (based on optimizing\n"
- "the Huffman tables) and \"lossy\" optimization based on setting\n"
- "maximum quality factor."
- msgstr ""
- #: gnu/packages/image.scm:554
- msgid "Library for handling Mac OS icns resource files"
- msgstr ""
- #: gnu/packages/image.scm:556
- msgid ""
- "Libicns is a library for the manipulation of Mac OS IconFamily resource\n"
- "type files (ICNS). @command{icns2png} and @command{png2icns} are provided to\n"
- "convert between PNG and ICNS. @command{icns2png} will extract image files from\n"
- "ICNS files under names like \"Foo_48x48x32.png\" useful for installing for use\n"
- "with .desktop files. Additionally, @command{icontainer2png} is provided for\n"
- "extracting icontainer icon files."
- msgstr ""
- #: gnu/packages/image.scm:591
- msgid "Library for handling TIFF files"
- msgstr ""
- #: gnu/packages/image.scm:593
- msgid ""
- "Libtiff provides support for the Tag Image File Format (TIFF), a format\n"
- "used for storing image data.\n"
- "Included are a library, libtiff, for reading and writing TIFF and a small\n"
- "collection of tools for doing simple manipulations of TIFF images."
- msgstr ""
- #: gnu/packages/image.scm:648
- msgid "Library and tools for image processing and analysis"
- msgstr ""
- #: gnu/packages/image.scm:650
- msgid ""
- "Leptonica is a C library and set of command-line tools for efficient\n"
- "image processing and image analysis operations. It supports rasterop, affine\n"
- "transformations, binary and grayscale morphology, rank order, and convolution,\n"
- "seedfill and connected components, image transformations combining changes in\n"
- "scale and pixel depth, and pixelwise masking, blending, enhancement, and\n"
- "arithmetic ops."
- msgstr ""
- #: gnu/packages/image.scm:688
- msgid "Decoder of the JBIG2 image compression format"
- msgstr ""
- #: gnu/packages/image.scm:690
- msgid ""
- "JBIG2 is designed for lossy or lossless encoding of @code{bilevel} (1-bit\n"
- "monochrome) images at moderately high resolution, and in particular scanned\n"
- "paper documents. In this domain it is very efficient, offering compression\n"
- "ratios on the order of 100:1.\n"
- "\n"
- "This is a decoder only implementation, and currently is in the alpha\n"
- "stage, meaning it doesn't completely work yet. However, it is\n"
- "maintaining parity with available encoders, so it is useful for real\n"
- "work."
- msgstr ""
- #: gnu/packages/image.scm:758
- msgid "Lossless compression for bi-level high-resolution images"
- msgstr ""
- #: gnu/packages/image.scm:760
- msgid ""
- "JBIG-KIT implements the JBIG1 data compression standard (ITU-T T.82 and\n"
- "ISO/IEC 11544:1993), designed for bi-level (one bit per pixel) images such as\n"
- "black-and-white scanned documents. It is widely used in fax products, printer\n"
- "firmware and drivers, document management systems, and imaging software.\n"
- "\n"
- "This package provides a static C library of (de)compression functions and some\n"
- "simple command-line converters similar to those provided by netpbm.\n"
- "\n"
- "Two JBIG1 variants are available. One (@file{jbig.c}) implements nearly all\n"
- "options of the standard but has to keep the full uncompressed image in memory.\n"
- "The other (@file{jbig85.c}) implements just the ITU-T T.85 profile, with\n"
- "memory management optimized for embedded and fax applications. It buffers\n"
- "only a few lines of the uncompressed image in memory and is able to stream\n"
- "images of initially unknown height."
- msgstr ""
- #: gnu/packages/image.scm:792
- msgid "Test files for OpenJPEG"
- msgstr ""
- #: gnu/packages/image.scm:793
- msgid ""
- "OpenJPEG-Data contains all files required to run the openjpeg\n"
- "test suite, including conformance tests (following Rec. ITU-T T.803 | ISO/IEC\n"
- "15444-4 procedures), non-regression tests and unit tests."
- msgstr ""
- #: gnu/packages/image.scm:845
- msgid "OPENJPEG Library and Applications"
- msgstr ""
- #: gnu/packages/image.scm:846
- msgid ""
- "OpenJPEG is an implementation of JPEG 2000 codec written in C\n"
- "language. It has been developed in order to promote the use of JPEG 2000, a\n"
- "still-image compression standard from the Joint Photographic Experts Group\n"
- "(JPEG). Since April 2015, it is officially recognized by ISO/IEC and ITU-T as a\n"
- "JPEG 2000 Reference Software."
- msgstr ""
- #: gnu/packages/image.scm:896
- msgid "Tools and library for working with GIF images"
- msgstr ""
- #: gnu/packages/image.scm:898
- msgid ""
- "GIFLIB is a library for reading and writing GIF images. It is API and\n"
- "ABI compatible with libungif which was in wide use while the LZW compression\n"
- "algorithm was patented. Tools are also included to convert, manipulate,\n"
- "compose, and analyze GIF images."
- msgstr ""
- #: gnu/packages/image.scm:948
- msgid "Library for working with WFM, EMF and EMF+ images"
- msgstr ""
- #: gnu/packages/image.scm:949
- msgid ""
- "The libUEMF library is a portable C99 implementation for\n"
- "reading and writing @acronym{WFM, Windows Metafile}, @acronym{EMF, Enhanced\n"
- "Metafile}, and @acronym{EMF+, Enhanced Metafile Plus} files."
- msgstr ""
- #: gnu/packages/image.scm:969
- msgid "GIF decompression library"
- msgstr ""
- #: gnu/packages/image.scm:971
- msgid "libungif is the old GIF decompression library by the GIFLIB project."
- msgstr ""
- #: gnu/packages/image.scm:1004
- msgid "Loading, saving, rendering and manipulating image files"
- msgstr ""
- #: gnu/packages/image.scm:1006
- msgid ""
- "Imlib2 is a library that does image file loading and saving as well as\n"
- "rendering, manipulation, arbitrary polygon support, etc.\n"
- "\n"
- "It does ALL of these operations FAST. Imlib2 also tries to be highly\n"
- "intelligent about doing them, so writing naive programs can be done easily,\n"
- "without sacrificing speed.\n"
- "\n"
- "This is a complete rewrite over the Imlib 1.x series. The architecture is\n"
- "more modular, simple, and flexible."
- msgstr ""
- #: gnu/packages/image.scm:1060
- msgid "Wrapper library for imlib2"
- msgstr ""
- #: gnu/packages/image.scm:1062
- msgid ""
- "Giblib is a simple library which wraps imlib2's context API, avoiding\n"
- "all the context_get/set calls, adds fontstyles to the truetype renderer and\n"
- "supplies a generic doubly-linked list and some string functions."
- msgstr ""
- #: gnu/packages/image.scm:1149
- msgid "Library for handling popular graphics image formats"
- msgstr ""
- #: gnu/packages/image.scm:1151
- msgid ""
- "FreeImage is a library for developers who would like to support popular\n"
- "graphics image formats like PNG, BMP, JPEG, TIFF and others."
- msgstr ""
- #: gnu/packages/image.scm:1229
- msgid "Computer vision library"
- msgstr ""
- #: gnu/packages/image.scm:1231
- msgid ""
- "VIGRA stands for Vision with Generic Algorithms. It is an image\n"
- " processing and analysis library that puts its main emphasis on customizable\n"
- " algorithms and data structures. It is particularly strong for\n"
- " multi-dimensional image processing."
- msgstr ""
- #: gnu/packages/image.scm:1262
- msgid "C interface to the VIGRA computer vision library"
- msgstr ""
- #: gnu/packages/image.scm:1264
- msgid ""
- "This package provides a C interface to the VIGRA C++ computer vision\n"
- "library. It is designed primarily to ease the implementation of higher-level\n"
- "language bindings to VIGRA."
- msgstr ""
- #: gnu/packages/image.scm:1299
- msgid "Lossless and lossy image compression"
- msgstr ""
- #: gnu/packages/image.scm:1301
- msgid ""
- "WebP is a new image format that provides lossless and lossy compression\n"
- "for images. WebP lossless images are 26% smaller in size compared to\n"
- "PNGs. WebP lossy images are 25-34% smaller in size compared to JPEG images at\n"
- "equivalent SSIM index. WebP supports lossless transparency (also known as\n"
- "alpha channel) with just 22% additional bytes. Transparency is also supported\n"
- "with lossy compression and typically provides 3x smaller file sizes compared\n"
- "to PNG when lossy compression is acceptable for the red/green/blue color\n"
- "channels."
- msgstr ""
- #: gnu/packages/image.scm:1327
- msgid "Library for handling MNG files"
- msgstr ""
- #: gnu/packages/image.scm:1329
- msgid "Libmng is the MNG (Multiple-image Network Graphics) reference library."
- msgstr ""
- #: gnu/packages/image.scm:1374
- msgid "Library and command-line utility to manage image metadata"
- msgstr ""
- #: gnu/packages/image.scm:1376
- msgid ""
- "Exiv2 is a C++ library and a command line utility to manage image\n"
- "metadata. It provides fast and easy read and write access to the Exif, IPTC\n"
- "and XMP metadata of images in various formats."
- msgstr ""
- #: gnu/packages/image.scm:1416
- msgid "Library for manipulating many image formats"
- msgstr ""
- #: gnu/packages/image.scm:1417
- msgid ""
- "Developer's Image Library (DevIL) is a library to develop\n"
- "applications with support for many types of images. DevIL can load, save,\n"
- "convert, manipulate, filter and display a wide variety of image formats."
- msgstr ""
- #: gnu/packages/image.scm:1439
- msgid "JPEG-2000 library"
- msgstr ""
- #: gnu/packages/image.scm:1440
- msgid ""
- "The JasPer Project is an initiative to provide a reference\n"
- "implementation of the codec specified in the JPEG-2000 Part-1 standard (i.e.,\n"
- "ISO/IEC 15444-1)."
- msgstr ""
- #: gnu/packages/image.scm:1462
- msgid "Scaling, colorspace conversion, and dithering library"
- msgstr ""
- #: gnu/packages/image.scm:1463
- msgid ""
- "Zimg implements the commonly required image processing basics\n"
- "of scaling, colorspace conversion, and depth conversion. A simple API enables\n"
- "conversion between any supported formats to operate with minimal knowledge from\n"
- "the programmer."
- msgstr ""
- #: gnu/packages/image.scm:1497
- msgid "Perceptual image comparison utility"
- msgstr ""
- #: gnu/packages/image.scm:1498
- msgid ""
- "PerceptualDiff visually compares two images to determine\n"
- "whether they look alike. It uses a computational model of the human visual\n"
- "system to detect similarities. This allows it too see beyond irrelevant\n"
- "differences in file encoding, image quality, and other small variations."
- msgstr ""
- #: gnu/packages/image.scm:1533
- msgid "`Hide' (nonconfidential) data in image or audio files"
- msgstr ""
- #: gnu/packages/image.scm:1535
- msgid ""
- "Steghide is a program to `hide' data in various kinds of image and audio\n"
- "files. This practice is known as @dfn{steganography}, but the method used by\n"
- "steghide is not very secure and should not be used where security is at stake.\n"
- "Even if a password is used, steghide offers little plausible deniability.\n"
- "\n"
- "Nonetheless, neither color nor sample frequencies are changed, making the\n"
- "embedding resistant against first-order statistical tests not aimed\n"
- "specifically at this tool."
- msgstr ""
- #: gnu/packages/image.scm:1576
- msgid "Optimizer that recompresses PNG image files to a smaller size"
- msgstr ""
- #: gnu/packages/image.scm:1577
- msgid ""
- "OptiPNG is a PNG optimizer that recompresses image\n"
- "files to a smaller size, without losing any information. This program\n"
- "also converts external formats (BMP, GIF, PNM and TIFF) to optimized\n"
- "PNG, and performs PNG integrity checks and corrections."
- msgstr ""
- #: gnu/packages/image.scm:1607
- msgid "High-performance CLI batch image resizer & rotator"
- msgstr ""
- #: gnu/packages/image.scm:1609
- msgid ""
- "@code{imgp} is a command line image resizer and rotator for JPEG and PNG\n"
- "images. It can resize (or thumbnail) and rotate thousands of images in a go\n"
- "while saving significantly on storage.\n"
- "\n"
- "This package may optionally be built with @code{python-pillow-simd} in place\n"
- "of @{python-pillow} for SIMD parallelism."
- msgstr ""
- #: gnu/packages/image.scm:1643
- msgid "Example PNGs for use in test suites"
- msgstr ""
- #: gnu/packages/image.scm:1644
- msgid ""
- "Collection of graphics images created to test PNG\n"
- "applications like viewers, converters and editors. As far as that is\n"
- "possible, all formats supported by the PNG standard are represented."
- msgstr ""
- #: gnu/packages/image.scm:1698
- msgid "SIMD-accelerated JPEG image handling library"
- msgstr ""
- #: gnu/packages/image.scm:1699
- msgid ""
- "libjpeg-turbo is a JPEG image codec that accelerates baseline\n"
- "JPEG compression and decompression using SIMD instructions: MMX on x86, SSE2 on\n"
- "x86-64, NEON on ARM, and AltiVec on PowerPC processors. Even on other systems,\n"
- "its highly-optimized Huffman coding routines allow it to outperform libjpeg by\n"
- "a significant amount.\n"
- "libjpeg-turbo implements both the traditional libjpeg API and the less powerful\n"
- "but more straightforward TurboJPEG API, and provides a full-featured Java\n"
- "interface. It supports color space extensions that allow it to compress from\n"
- "and decompress to 32-bit and big-endian pixel buffers (RGBX, XBGR, etc.)."
- msgstr ""
- #: gnu/packages/image.scm:1752
- msgid "Library for reading and writing files in the nifti-1 format"
- msgstr ""
- #: gnu/packages/image.scm:1753
- msgid ""
- "Niftilib is a set of i/o libraries for reading and writing\n"
- "files in the nifti-1 data format - a binary file format for storing\n"
- "medical image data, e.g. magnetic resonance image (MRI) and functional MRI\n"
- "(fMRI) brain images."
- msgstr ""
- #: gnu/packages/image.scm:1795
- msgid "Color picker"
- msgstr ""
- #: gnu/packages/image.scm:1796
- msgid "Gpick is an advanced color picker and palette editing tool."
- msgstr ""
- #: gnu/packages/image.scm:1814
- msgid "IPTC metadata manipulation library"
- msgstr ""
- #: gnu/packages/image.scm:1816
- msgid ""
- "Libiptcdata is a C library for manipulating the International Press\n"
- "Telecommunications Council (@dfn{IPTC}) metadata stored within multimedia files\n"
- "such as images. This metadata can include captions and keywords, often used by\n"
- "popular photo management applications. The library provides routines for\n"
- "parsing, viewing, modifying, and saving this metadata."
- msgstr ""
- #: gnu/packages/image.scm:1845
- msgid "Powerful yet simple to use screenshot software"
- msgstr ""
- #: gnu/packages/image.scm:1846
- msgid ""
- "Flameshot is a screenshot program.\n"
- "Features:\n"
- "\n"
- "@itemize\n"
- "@item Customizable appearance.\n"
- "@item Easy to use.\n"
- "@item In-app screenshot edition.\n"
- "@item DBus interface.\n"
- "@item Upload to Imgur.\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/image.scm:1881
- msgid "Grab and edit on the fly snapshots of a Wayland compositor"
- msgstr ""
- #: gnu/packages/image.scm:1883
- msgid ""
- "@command{swappy} is a command-line utility to take and edit screenshots\n"
- "of Wayland desktops. Works great with grim, slurp and sway. But can easily\n"
- "work with other screen copy tools that can output a final PNG image to\n"
- "stdout."
- msgstr ""
- #: gnu/packages/image.scm:1917
- msgid "Edit GIF images and animations"
- msgstr ""
- #: gnu/packages/image.scm:1918
- msgid ""
- "Gifsicle is a command-line GIF image manipulation tool that:\n"
- "\n"
- "@itemize\n"
- "@item Provides a batch mode for changing GIFs in place.\n"
- "@item Prints detailed information about GIFs, including comments.\n"
- "@item Control over interlacing, comments, looping, transparency, etc.\n"
- "@item Creates well-behaved GIFs: removes redundant colors, only uses local color\n"
- "tables, etc.\n"
- "@item Shrinks colormaps and change images to use the Web-safe palette.\n"
- "@item Optimizes GIF animations, or unoptimizes them for easier editing.\n"
- "@end itemize\n"
- "\n"
- "Two other programs are included with Gifsicle: @command{gifview} is a\n"
- "lightweight animated-GIF viewer, and @command{gifdiff} compares two GIFs for\n"
- "identical visual appearance."
- msgstr ""
- #: gnu/packages/image.scm:1953
- msgid "Convert JPEG images to ASCII"
- msgstr ""
- #: gnu/packages/image.scm:1955
- msgid "Jp2a is a small utility that converts JPEG images to ASCII."
- msgstr ""
- #: gnu/packages/image.scm:1975
- msgid "Create screenshots from a Wayland compositor"
- msgstr ""
- #: gnu/packages/image.scm:1976
- msgid "grim can create screenshots from a Wayland compositor."
- msgstr ""
- #: gnu/packages/image.scm:1999
- msgid "Select a region in a Wayland compositor"
- msgstr ""
- #: gnu/packages/image.scm:2000
- msgid ""
- "Slurp can select a region in a Wayland compositor and print it\n"
- "to the standard output. It works well together with grim."
- msgstr ""
- #: gnu/packages/image.scm:2031
- msgid "Markup language for representing PNG contents"
- msgstr ""
- #: gnu/packages/image.scm:2032
- msgid ""
- "SNG (Scriptable Network Graphics) is a minilanguage designed\n"
- "specifically to represent the entire contents of a PNG (Portable Network\n"
- "Graphics) file in an editable form. Thus, SNGs representing elaborate\n"
- "graphics images and ancillary chunk data can be readily generated or modified\n"
- "using only text tools.\n"
- "\n"
- "SNG is implemented by a compiler/decompiler called sng that\n"
- "losslessly translates between SNG and PNG."
- msgstr ""
- #: gnu/packages/image.scm:2059
- msgid "C++ blurhash encoder/decoder"
- msgstr ""
- #: gnu/packages/image.scm:2060
- msgid ""
- "Simple encoder and decoder for blurhashes. Contains a\n"
- "command line program as well as a shared library."
- msgstr ""
- #: gnu/packages/image.scm:2113
- msgid "PNG encoder and decoder in C and C++, without dependencies"
- msgstr ""
- #: gnu/packages/image.scm:2114
- msgid ""
- "LodePNG is a PNG image decoder and encoder, all in one,\n"
- "no dependency or linkage required. It's made for C (ISO C90), and has a C++\n"
- "wrapper with a more convenient interface on top."
- msgstr ""
- #: gnu/packages/image.scm:2136
- msgid "Extract and convert bitmaps from Windows icon and cursor files"
- msgstr ""
- #: gnu/packages/image.scm:2137
- msgid ""
- "Icoutils are a set of program for extracting and converting\n"
- "bitmaps from Microsoft Windows icon and cursor files. These files usually\n"
- "have the extension @code{.ico} or @code{.cur}, but they can also be embedded\n"
- "in executables and libraries (@code{.dll}-files). (Such embedded files are\n"
- "referred to as resources.)\n"
- "\n"
- "Conversion of these files to and from PNG images is done @command{icotool}.\n"
- "@command{extresso} automates these tasks with the help of special resource\n"
- "scripts. Resources such can be extracted from MS Windows executable and\n"
- "library files with @command{wrestool}.\n"
- "\n"
- "This package can be used to create @code{favicon.ico} files for web sites."
- msgstr ""
- #: gnu/packages/image.scm:2233
- msgid "Encode and decode AVIF files"
- msgstr ""
- #: gnu/packages/image.scm:2234
- msgid ""
- "Libavif is a C implementation of @acronym{AVIF, the AV1 Image\n"
- "File Format}. It can encode and decode all YUV formats and bit depths supported\n"
- "by AOM, including with alpha."
- msgstr ""
- #: gnu/packages/image.scm:2266
- msgid "HEIF and AVIF file format decoder and encoder"
- msgstr ""
- #: gnu/packages/image.scm:2268
- msgid ""
- "@code{libheif} is an ISO/IEC 23008-12:2017 HEIF and AVIF (AV1 Image File\n"
- "Format) file format decoder and encoder."
- msgstr ""
- #: gnu/packages/image.scm:2319
- msgid "JPEG XL image format reference implementation"
- msgstr ""
- #: gnu/packages/image.scm:2320
- msgid ""
- "This package contains a reference implementation of JPEG XL\n"
- "(encoder and decoder)."
- msgstr ""
- #: gnu/packages/image.scm:2363
- msgid "Create pixel art and manipulate digital images"
- msgstr ""
- #: gnu/packages/image.scm:2365
- msgid ""
- "Mtpaint is a graphic editing program which uses the GTK+ toolkit.\n"
- "It can create and edit indexed palette or 24bit RGB images, offers basic\n"
- "painting and palette manipulation tools. It also handles JPEG, JPEG2000,\n"
- "GIF, TIFF, WEBP, BMP, PNG, XPM formats."
- msgstr ""
- #: gnu/packages/image.scm:2425
- msgid "Fast and simple painting app for artists"
- msgstr ""
- #: gnu/packages/image.scm:2427
- msgid ""
- "MyPaint is a simple drawing and painting program that works well with\n"
- "Wacom-style graphics tablets."
- msgstr ""
- #: gnu/packages/image.scm:2482
- msgid "Organize photos and videos in folders"
- msgstr ""
- #: gnu/packages/image.scm:2483
- msgid ""
- "Phockup is a media sorting tool that uses creation date and\n"
- "time information in photos and videos to organize them into folders by year,\n"
- "month and day. All files which are not images or videos or those which do not\n"
- "have creation date information will be placed in a folder called\n"
- "@file{unknown}."
- msgstr ""
- #: gnu/packages/image.scm:2507
- msgid "Simple PNG loading library"
- msgstr ""
- #: gnu/packages/image.scm:2509
- msgid ""
- "@code{libspng} is a simple C library for loading Portable Network\n"
- "Graphics (PNGs), intended as an easy-to-use replacement for @code{libpng}."
- msgstr ""
- #: gnu/packages/image-viewers.scm:170
- msgid "Watch PeerTube or YouTube videos from the terminal"
- msgstr ""
- #: gnu/packages/image-viewers.scm:171
- msgid ""
- "@code{ytfzf} is a POSIX script that helps you find PeerTube or\n"
- "YouTube videos without requiring API and opens/downloads them using mpv/ytdl."
- msgstr ""
- #: gnu/packages/image-viewers.scm:216
- msgid "Fast and light imlib2-based image viewer"
- msgstr ""
- #: gnu/packages/image-viewers.scm:218
- msgid ""
- "feh is an X11 image viewer aimed mostly at console users.\n"
- "Unlike most other viewers, it does not have a fancy GUI, but simply\n"
- "displays images. It can also be used to set the desktop wallpaper.\n"
- "It is controlled via commandline arguments and configurable key/mouse\n"
- "actions."
- msgstr ""
- #: gnu/packages/image-viewers.scm:280
- msgid "Lightweight GTK+ based image viewer"
- msgstr ""
- #: gnu/packages/image-viewers.scm:282
- msgid ""
- "Geeqie is a lightweight GTK+ based image viewer for Unix like operating\n"
- "systems. It features: EXIF, IPTC and XMP metadata browsing and editing\n"
- "interoperability; easy integration with other software; geeqie works on files\n"
- "and directories, there is no need to import images; fast preview for many raw\n"
- "image formats; tools for image comparison, sorting and managing photo\n"
- "collection. Geeqie was initially based on GQview."
- msgstr ""
- #: gnu/packages/image-viewers.scm:306
- msgid "Simple and fast image viewer for X"
- msgstr ""
- #: gnu/packages/image-viewers.scm:307
- msgid ""
- "gpicview is a lightweight GTK+ 2.x based image viewer.\n"
- "It is the default image viewer on LXDE desktop environment."
- msgstr ""
- #: gnu/packages/image-viewers.scm:357
- msgid "Simple X Image Viewer"
- msgstr ""
- #: gnu/packages/image-viewers.scm:359
- msgid ""
- "sxiv is an alternative to feh and qiv. Its primary goal is to\n"
- "provide the most basic features required for fast image viewing. It has\n"
- "vi key bindings and works nicely with tiling window managers. Its code\n"
- "base should be kept small and clean to make it easy for you to dig into\n"
- "it and customize it for your needs."
- msgstr ""
- #: gnu/packages/image-viewers.scm:414
- msgid "Neo Simple X Image Viewer"
- msgstr ""
- #: gnu/packages/image-viewers.scm:416
- msgid ""
- "nsxiv is a fork of sxiv. Its primary goal is to provide the most basic\n"
- "features required for fast image viewing. It has vi key bindings and works\n"
- "nicely with tiling window managers. Its code base should be kept small and\n"
- "clean to make it easy for you to dig into it and customize it for your\n"
- "needs."
- msgstr ""
- #: gnu/packages/image-viewers.scm:455
- msgid "Simple, fast and elegant image viewer"
- msgstr ""
- #: gnu/packages/image-viewers.scm:456
- msgid ""
- "Viewnior is an image viewer program. Created to be simple,\n"
- "fast and elegant. Its minimalistic interface provides more screenspace for\n"
- "your images. Among its features are:\n"
- "@enumerate\n"
- "@item Fullscreen & Slideshow\n"
- "@item Rotate, flip, crop, save, delete images\n"
- "@item Animation support\n"
- "@item Browse only selected images\n"
- "@item Navigation window\n"
- "@item Set image as wallpaper (Gnome 2, Gnome 3, XFCE, LXDE, FluxBox, Nitrogen)\n"
- "@item Simple interface\n"
- "@item EXIF and IPTC metadata\n"
- "@item Configurable mouse actions\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/image-viewers.scm:511
- msgid "Render images in the terminal"
- msgstr ""
- #: gnu/packages/image-viewers.scm:513
- msgid ""
- "Catimg is a little program that prints images in the terminal.\n"
- "It supports JPEG, PNG and GIF formats."
- msgstr ""
- #: gnu/packages/image-viewers.scm:539
- msgid "Draw images in your ANSI terminal with true color"
- msgstr ""
- #: gnu/packages/image-viewers.scm:540
- msgid ""
- "PIXterm shows images directly in your terminal, recreating\n"
- "the pixels through a combination of ANSI character background color and the\n"
- "unicode lower half block element. It supports JPEG, PNG, GIF, BMP, TIFF\n"
- "and WebP."
- msgstr ""
- #: gnu/packages/image-viewers.scm:596
- msgid "High dynamic range (HDR) imaging application"
- msgstr ""
- #: gnu/packages/image-viewers.scm:598
- msgid ""
- "Luminance HDR (formerly QtPFSGui) is a graphical user interface\n"
- "application that aims to provide a workflow for high dynamic range (HDR)\n"
- "imaging. It supports several HDR and LDR image formats, and it can:\n"
- "\n"
- "@itemize\n"
- "@item Create an HDR file from a set of images (formats: JPEG, TIFF 8bit and\n"
- "16bit, RAW) of the same scene taken at different exposure setting;\n"
- "@item Save load HDR images;\n"
- "@item Rotate, resize and crop HDR images;\n"
- "@item Tone-map HDR images;\n"
- "@item Copy EXIF data between sets of images.\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/image-viewers.scm:672
- msgid "Image viewer for comics"
- msgstr ""
- #: gnu/packages/image-viewers.scm:673
- msgid ""
- "MComix is a customizable image viewer that specializes as\n"
- "a comic and manga reader. It supports a variety of container formats\n"
- "including CBZ, CB7, CBT, LHA.\n"
- "\n"
- "For PDF support, install the @emph{mupdf} package."
- msgstr ""
- #: gnu/packages/image-viewers.scm:719
- msgid "Convenient and minimal image viewer"
- msgstr ""
- #: gnu/packages/image-viewers.scm:720
- msgid ""
- "qView is a Qt image viewer designed with visually\n"
- "minimalism and usability in mind. Its features include animated GIF\n"
- "controls, file history, rotation/mirroring, and multithreaded\n"
- "preloading."
- msgstr ""
- #: gnu/packages/image-viewers.scm:742
- msgid "Convert images to ANSI/Unicode characters"
- msgstr ""
- #: gnu/packages/image-viewers.scm:744
- msgid ""
- "Chafa is a command-line utility that converts all kinds of images,\n"
- "including animated GIFs, into ANSI/Unicode character output that can be\n"
- "displayed in a terminal."
- msgstr ""
- #: gnu/packages/image-viewers.scm:791
- msgid "Image viewer for tiling window managers"
- msgstr ""
- #: gnu/packages/image-viewers.scm:792
- msgid ""
- "@code{imv} is a command line image viewer intended for use\n"
- "with tiling window managers. Features include:\n"
- "\n"
- "@itemize\n"
- "@item Native Wayland and X11 support.\n"
- "@item Support for dozens of image formats including:\n"
- "@itemize\n"
- "@item PNG\n"
- "@item JPEG\n"
- "@item Animated GIFs\n"
- "@item SVG\n"
- "@item TIFF\n"
- "@item Various RAW formats\n"
- "@item Photoshop PSD files\n"
- "@end itemize\n"
- "@item Configurable key bindings and behavior.\n"
- "@item Highly scriptable with IPC via imv-msg.\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/image-viewers.scm:867
- msgid "Graphical image viewer for X"
- msgstr ""
- #: gnu/packages/image-viewers.scm:869
- msgid ""
- "Quick Image Viewer is a small and fast GDK/Imlib2 image viewer.\n"
- "Features include zoom, maxpect, scale down, fullscreen, slideshow, delete,\n"
- "brightness/contrast/gamma correction, pan with keyboard and mouse, flip,\n"
- "rotate left/right, jump/forward/backward images, filename filter and use it\n"
- "to set X desktop background."
- msgstr ""
- #: gnu/packages/image-viewers.scm:911
- msgid "Powerful image viewer with minimal UI"
- msgstr ""
- #: gnu/packages/image-viewers.scm:913
- msgid ""
- "pqiv is a GTK-3 based command-line image viewer with a minimal UI.\n"
- "It is highly customizable, can be fully controlled from scripts, and has\n"
- "support for various file formats including PDF, Postscript, video files and\n"
- "archives."
- msgstr ""
- #: gnu/packages/image-viewers.scm:969
- msgid "Image viewer supporting all common formats"
- msgstr ""
- #: gnu/packages/image-viewers.scm:970
- msgid ""
- "Nomacs is a simple to use image lounge featuring\n"
- "semi-transparent widgets that display additional information such as metadata,\n"
- "thumbnails and histograms. It is able to browse images compressed archives\n"
- "and add notes to images.\n"
- "\n"
- "Nomacs includes image manipulation methods for adjusting brightness, contrast,\n"
- "saturation, hue, gamma, and exposure. It has a pseudo color function which\n"
- "allows creating false color images. A unique feature of Nomacs is the\n"
- "synchronization of multiple instances."
- msgstr ""
- #: gnu/packages/image-viewers.scm:1013
- msgid "Picture viewer for X with a thumbnail-based selector"
- msgstr ""
- #: gnu/packages/image-viewers.scm:1015
- msgid "xzgv is a fast image viewer that provides extensive keyboard support."
- msgstr ""
- #: gnu/packages/image-viewers.scm:1136
- msgid "Organize your media with tags like a dektop booru"
- msgstr ""
- #: gnu/packages/image-viewers.scm:1138
- msgid ""
- "The hydrus network client is an application written for\n"
- "internet-fluent media nerds who have large image/swf/webm collections.\n"
- "It browses with tags instead of folders, a little like a booru on your desktop.\n"
- "Advanced users can share tags and files anonymously through custom servers that\n"
- "any user may run. Everything is free and privacy is the first concern."
- msgstr ""
- #: gnu/packages/inkscape.scm:238
- msgid "Vector graphics editor"
- msgstr ""
- #: gnu/packages/inkscape.scm:239
- msgid ""
- "Inkscape is a vector graphics editor. What sets Inkscape\n"
- "apart is its use of Scalable Vector Graphics (SVG), an XML-based W3C standard,\n"
- "as the native format."
- msgstr ""
- #: gnu/packages/jemalloc.scm:69
- msgid "General-purpose scalable concurrent malloc implementation"
- msgstr ""
- #: gnu/packages/jemalloc.scm:71
- msgid ""
- "This library providing a malloc(3) implementation that emphasizes\n"
- "fragmentation avoidance and scalable concurrency support."
- msgstr ""
- #: gnu/packages/less.scm:53
- msgid "Paginator for terminals"
- msgstr ""
- #: gnu/packages/less.scm:55
- msgid ""
- "GNU less is a pager, a program that allows you to view large amounts\n"
- "of text in page-sized chunks. Unlike traditional pagers, it allows both\n"
- "backwards and forwards movement through the document. It also does not have\n"
- "to read the entire input file before starting, so it starts faster than most\n"
- "text editors."
- msgstr ""
- #: gnu/packages/less.scm:118
- msgid "Input filter for less"
- msgstr ""
- #: gnu/packages/less.scm:119
- msgid ""
- "To browse files, the excellent viewer @code{less} can be\n"
- "used. By setting the environment variable @code{LESSOPEN}, less can be\n"
- "enhanced by external filters to become more powerful. The input filter for\n"
- "less described here is called @code{lesspipe.sh}. It is able to process a\n"
- "wide variety of file formats. It enables users to inspect archives and\n"
- "display their contents without having to unpack them before. The filter is\n"
- "easily extensible for new formats."
- msgstr ""
- #: gnu/packages/lesstif.scm:53
- msgid "Clone of the Motif toolkit for the X window system"
- msgstr ""
- #: gnu/packages/lesstif.scm:54
- msgid "Clone of the Motif toolkit for the X window system."
- msgstr ""
- #: gnu/packages/lesstif.scm:82
- msgid "Motif toolkit for the X window system"
- msgstr ""
- #: gnu/packages/lesstif.scm:83
- msgid ""
- "Motif is a standard graphical user interface, (as defined\n"
- "by the IEEE 1295 specification), used on more than 200 hardware and software\n"
- "platforms. It provides application developers, end users, and system vendors\n"
- "with a widely used environment for standardizing application presentation on a\n"
- "wide range of platforms."
- msgstr ""
- #: gnu/packages/libreoffice.scm:113
- msgid "General purpose formula parser and interpreter"
- msgstr ""
- #: gnu/packages/libreoffice.scm:114
- msgid ""
- "Ixion is a library for calculating the results of formula\n"
- "expressions stored in multiple named targets, or \"cells\". The cells can\n"
- "be referenced from each other, and the library takes care of resolving\n"
- "their dependencies automatically upon calculation."
- msgstr ""
- #: gnu/packages/libreoffice.scm:140
- msgid "File import filter library for spreadsheet documents"
- msgstr ""
- #: gnu/packages/libreoffice.scm:141
- msgid ""
- "Orcus is a library that provides a collection of standalone\n"
- "file processing filters. It is currently focused on providing filters for\n"
- "spreadsheet documents. The library includes import filters for\n"
- "Microsoft Excel 2007 XML, Microsoft Excel 2003 XML, Open Document Spreadsheet,\n"
- "Plain Text, Gnumeric XML, Generic XML. It also includes low-level parsers for\n"
- "CSV, CSS and XML."
- msgstr ""
- #: gnu/packages/libreoffice.scm:192
- msgid "Convert between any document format supported by LibreOffice"
- msgstr ""
- #: gnu/packages/libreoffice.scm:194
- msgid ""
- "Unoconv is a command-line utility to convert documents from any format\n"
- "that LibreOffice can import, to any format it can export. It can be used for\n"
- "batch processing and can apply custom style templates and filters.\n"
- "\n"
- "Unoconv converts between over a hundred formats, including Open Document\n"
- "Format (@file{.odt}, @file{.ods}, @file{.odp})), Portable Document Format\n"
- "(@file{.pdf}), HTML and XHTML, RTF, DocBook (@file{.xml}), @file{.doc} and\n"
- "@file{.docx}), @file{.xls} and @file{.xlsx}).\n"
- "\n"
- "All required fonts must be installed on the converting system."
- msgstr ""
- #: gnu/packages/libreoffice.scm:230
- msgid "Document importer for office suites"
- msgstr ""
- #: gnu/packages/libreoffice.scm:231
- msgid ""
- "Librevenge is a base library for writing document import\n"
- "filters. It has interfaces for text documents, vector graphics,\n"
- "spreadsheets and presentations."
- msgstr ""
- #: gnu/packages/libreoffice.scm:257
- msgid "Library for importing WordPerfect documents"
- msgstr ""
- #: gnu/packages/libreoffice.scm:258
- msgid ""
- "Libwpd is a C++ library designed to help process\n"
- "WordPerfect documents. It is most commonly used to import such documents\n"
- "into other word processors."
- msgstr ""
- #: gnu/packages/libreoffice.scm:294
- msgid "Library for import of reflowable e-book formats"
- msgstr ""
- #: gnu/packages/libreoffice.scm:295
- msgid ""
- "Libe-book is a library and a set of tools for reading and\n"
- "converting various reflowable e-book formats. Currently supported are:\n"
- "Broad Band eBook, eReader .pdb, FictionBook v. 2 (including zipped files),\n"
- "PalmDoc Ebook, Plucker .pdb, QiOO (mobile format, for java-enabled\n"
- "cellphones), TCR (simple compressed text format), TealDoc, zTXT,\n"
- "ZVR (simple compressed text format)."
- msgstr ""
- #: gnu/packages/libreoffice.scm:323
- msgid "EPUB generator library for librevenge"
- msgstr ""
- #: gnu/packages/libreoffice.scm:324
- msgid ""
- "libepubgen is an EPUB generator for librevenge. It supports\n"
- "librevenge's text document interface and--currently in a very limited\n"
- "way--presentation and vector drawing interfaces."
- msgstr ""
- #: gnu/packages/libreoffice.scm:348
- msgid "Library and tools for the WordPerfect Graphics format"
- msgstr ""
- #: gnu/packages/libreoffice.scm:349
- msgid ""
- "The libwpg project provides a library and tools for\n"
- "working with graphics in the WPG (WordPerfect Graphics) format."
- msgstr ""
- #: gnu/packages/libreoffice.scm:398
- msgid "CMIS client library"
- msgstr ""
- #: gnu/packages/libreoffice.scm:399
- msgid ""
- "LibCMIS is a C++ client library for the CMIS interface. It\n"
- "allows C++ applications to connect to any ECM behaving as a CMIS server such\n"
- "as Alfresco or Nuxeo."
- msgstr ""
- #: gnu/packages/libreoffice.scm:424
- msgid "Library for parsing the AbiWord format"
- msgstr ""
- #: gnu/packages/libreoffice.scm:425
- msgid ""
- "Libabw is a library that parses the file format of\n"
- "AbiWord documents."
- msgstr ""
- #: gnu/packages/libreoffice.scm:448
- msgid "Library for parsing the CorelDRAW format"
- msgstr ""
- #: gnu/packages/libreoffice.scm:449
- msgid ""
- "Libcdr is a library that parses the file format of\n"
- "CorelDRAW documents of all versions."
- msgstr ""
- #: gnu/packages/libreoffice.scm:478
- msgid "Library for parsing the Apple Keynote format"
- msgstr ""
- #: gnu/packages/libreoffice.scm:479
- msgid ""
- "Libetonyek is a library that parses the file format of\n"
- "Apple Keynote documents. It currently supports Keynote versions 2 to 5."
- msgstr ""
- #: gnu/packages/libreoffice.scm:500
- msgid "Library to access tags for identifying languages"
- msgstr ""
- #: gnu/packages/libreoffice.scm:501
- msgid ""
- "Liblangtag implements an interface to work with tags\n"
- "for identifying languages as described in RFC 5646. It supports the\n"
- "extensions described in RFC6067 and RFC6497, and Extension T for\n"
- "language/locale identifiers as described in the Unicode CLDR\n"
- "standard 21.0.2."
- msgstr ""
- #: gnu/packages/libreoffice.scm:521
- msgid "Text Categorization library"
- msgstr ""
- #: gnu/packages/libreoffice.scm:522
- msgid ""
- "Libexttextcat is an N-Gram-Based Text Categorization\n"
- "library primarily intended for language guessing."
- msgstr ""
- #: gnu/packages/libreoffice.scm:558
- msgid "Library for parsing the FreeHand format"
- msgstr ""
- #: gnu/packages/libreoffice.scm:559
- msgid ""
- "Libfreehand is a library that parses the file format of\n"
- "Aldus/Macromedia/Adobe FreeHand documents."
- msgstr ""
- #: gnu/packages/libreoffice.scm:590
- msgid "Library for parsing the Microsoft Publisher format"
- msgstr ""
- #: gnu/packages/libreoffice.scm:591
- msgid ""
- "Libmspub is a library that parses the file format of\n"
- "Microsoft Publisher documents of all versions."
- msgstr ""
- #: gnu/packages/libreoffice.scm:611
- msgid "Language-neutral @code{NUMBERTEXT} and @code{MONEYTEXT} functions"
- msgstr ""
- #: gnu/packages/libreoffice.scm:613
- msgid ""
- "The libnumbertext library provides language-neutral @code{NUMBERTEXT}\n"
- "and @code{MONEYTEXT} functions for LibreOffice Calc, available for C++ and\n"
- "Java."
- msgstr ""
- #: gnu/packages/libreoffice.scm:639
- msgid "Library for parsing the PageMaker format"
- msgstr ""
- #: gnu/packages/libreoffice.scm:640
- msgid ""
- "Libpagemaker is a library that parses the file format of\n"
- "Aldus/Adobe PageMaker documents. Currently it only understands documents\n"
- "created by PageMaker version 6.x and 7."
- msgstr ""
- #: gnu/packages/libreoffice.scm:664
- msgid "Library for parsing the Microsoft Visio format"
- msgstr ""
- #: gnu/packages/libreoffice.scm:665
- msgid ""
- "Libvisio is a library that parses the file format of\n"
- "Microsoft Visio documents of all versions."
- msgstr ""
- #: gnu/packages/libreoffice.scm:691
- msgid "ODF (Open Document Format) library"
- msgstr ""
- #: gnu/packages/libreoffice.scm:692
- msgid ""
- "Libodfgen is a library for generating documents in the\n"
- "Open Document Format (ODF). It provides generator implementations for all\n"
- "document interfaces supported by librevenge:\n"
- "text documents, vector drawings, presentations and spreadsheets."
- msgstr ""
- #: gnu/packages/libreoffice.scm:717
- msgid "Import library for some old Macintosh text documents"
- msgstr ""
- #: gnu/packages/libreoffice.scm:718
- msgid ""
- "Libmwaw contains some import filters for old Macintosh\n"
- "text documents (MacWrite, ClarisWorks, ... ) and for some graphics and\n"
- "spreadsheet documents."
- msgstr ""
- #: gnu/packages/libreoffice.scm:740
- msgid "Provides LibreOffice support for old StarOffice documents"
- msgstr ""
- #: gnu/packages/libreoffice.scm:741
- msgid ""
- "@code{libstaroffice} is an import filter for the document formats\n"
- "from the old StarOffice (.sdc, .sdw, ...)."
- msgstr ""
- #: gnu/packages/libreoffice.scm:764
- msgid "Import library for Microsoft Works text documents"
- msgstr ""
- #: gnu/packages/libreoffice.scm:765
- msgid ""
- "Libwps is a library for importing files in the Microsoft\n"
- "Works word processor file format."
- msgstr ""
- #: gnu/packages/libreoffice.scm:789
- msgid "Parses file format of Zoner Callisto/Draw documents"
- msgstr ""
- #: gnu/packages/libreoffice.scm:790
- msgid ""
- "Libzmf is a library that parses the file format of Zoner\n"
- "Callisto/Draw documents. Currently it only understands documents created by\n"
- "Zoner Draw version 4 and 5."
- msgstr ""
- #: gnu/packages/libreoffice.scm:811
- msgid "Hyphenation library"
- msgstr ""
- #: gnu/packages/libreoffice.scm:812
- msgid ""
- "Hyphen is a hyphenation library using TeX hyphenation\n"
- "patterns, which are pre-processed by a perl script."
- msgstr ""
- #: gnu/packages/libreoffice.scm:835
- msgid "Thesaurus"
- msgstr ""
- #: gnu/packages/libreoffice.scm:836
- msgid ""
- "MyThes is a simple thesaurus that uses a structured text\n"
- "data file and an index file with binary search to look up words and phrases\n"
- "and to return information on pronunciations, meanings and synonyms."
- msgstr ""
- #: gnu/packages/libreoffice.scm:861
- msgid "Library and tools for the QuarkXPress file format"
- msgstr ""
- #: gnu/packages/libreoffice.scm:862
- msgid ""
- "libqxp is a library and a set of tools for reading and\n"
- "converting QuarkXPress file format. It supports versions 3.1 to 4.1."
- msgstr ""
- #: gnu/packages/libreoffice.scm:882
- msgid "Float-to-string conversion algorithm"
- msgstr ""
- #: gnu/packages/libreoffice.scm:883
- msgid ""
- "Dragonbox generates a pair of integers from a floating-point\n"
- "number: the decimal significand and the decimal exponent of the input\n"
- "floating-point number. These integers can then be used for string generation\n"
- "of decimal representation of the input floating-point number, the procedure\n"
- "commonly called @code{ftoa} or @code{dtoa}."
- msgstr ""
- #: gnu/packages/libreoffice.scm:1146
- msgid "Office suite"
- msgstr ""
- #: gnu/packages/libreoffice.scm:1147
- msgid ""
- "LibreOffice is a comprehensive office suite. It contains\n"
- "a number of components: Writer, a word processor; Calc, a spreadsheet\n"
- "application; Impress, a presentation engine; Draw, a drawing and\n"
- "flowcharting application; Base, a database and database frontend;\n"
- "Math for editing mathematics."
- msgstr ""
- #: gnu/packages/linux.scm:732
- msgid "GNU Linux-Libre kernel headers"
- msgstr ""
- #: gnu/packages/linux.scm:733
- msgid "Headers of the Linux-Libre kernel."
- msgstr ""
- #: gnu/packages/linux.scm:1068
- msgid "100% free redistribution of a cleaned Linux kernel"
- msgstr ""
- #: gnu/packages/linux.scm:1069
- msgid ""
- "GNU Linux-Libre is a free (as in freedom) variant of the\n"
- "Linux kernel. It has been modified to remove all non-free binary blobs."
- msgstr ""
- #: gnu/packages/linux.scm:1377
- msgid "Linux kernel module to perform ACPI method calls"
- msgstr ""
- #: gnu/packages/linux.scm:1379
- msgid ""
- "This simple Linux kernel module allows calls from user space to any\n"
- "@acronym{ACPI, Advanced Configuration and Power Interface} method provided by\n"
- "your computer's firmware, by writing to @file{/proc/acpi/call}. You can pass\n"
- "any number of parameters of types @code{ACPI_INTEGER}, @code{ACPI_STRING},\n"
- "and @code{ACPI_BUFFER}.\n"
- "\n"
- "It grants direct and undocumented access to your hardware that may cause damage\n"
- "and should be used with caution, especially on untested models."
- msgstr ""
- #: gnu/packages/linux.scm:1445
- msgid "Measure performance data & tweak low-level settings on x86-64 CPUs"
- msgstr ""
- #: gnu/packages/linux.scm:1447
- msgid ""
- "CoreFreq is a CPU monitor that reports low-level processor settings and\n"
- "performance data with notably high precision by using a loadable Linux kernel\n"
- "module. Unlike most similar tools, it can be used to modify some settings if\n"
- "supported by the hardware and at your own risk. It's designed for 64-bit x86\n"
- "Intel processors (Atom, Core2, Nehalem, SandyBridge, and newer) and compatible\n"
- "architectures like AMD@tie{}Zen and Hygon@tie{}Dhyana.\n"
- "\n"
- "Supported processor features include:\n"
- "@enumerate\n"
- "@item time spent in C-states, including C1/C3 Auto- and UnDemotion;\n"
- "@item core temperatures, voltage, and tweaking thermal limits;\n"
- "@item core frequencies, ratios, and base clock rate;\n"
- "@item enabling, disabling, and testing SpeedStep (EIST), Turbo Boost, and\n"
- "Hyper-Threading or SMT;\n"
- "@item enabling or disabling data cache prefetching;\n"
- "@item kernel assembly code to keep as near as possible readings of performance\n"
- "counters such as the @acronym{TSC, Time Stamp Counter}, @acronym{UCC, Unhalted\n"
- "Core Cycles}, and @acronym{URC, Unhalted Reference Cycles};\n"
- "@item the number of instructions per cycle or second (IPS, IPC, and CPI);\n"
- "@item memory controller geometry and RAM timings;\n"
- "@item running processes' CPU affinity.\n"
- "@end enumerate\n"
- "\n"
- "This package provides the @command{corefreqd} data collection daemon, the\n"
- "@command{corefreq-cli} client to visualise and control it in real time, and the\n"
- "@code{corefreqk} kernel module in its own separate output. Read the included\n"
- "@file{README.md} before loading it."
- msgstr ""
- #: gnu/packages/linux.scm:1494
- msgid "Linux kernel module to control the Librem Embedded Controller"
- msgstr ""
- #: gnu/packages/linux.scm:1496
- msgid ""
- "This is the Linux kernel @acronym{ACPI, Advanced Configuration and Power\n"
- "Interface} platform driver for the @acronym{EC, Embedded Controller} firmware\n"
- "on Purism Librem laptop computers. It allows user-space control over the\n"
- "battery charging thresholds, keyboard backlight, fans and thermal monitors,\n"
- "and the notification, WiFi, and Bluetooth LED."
- msgstr ""
- #: gnu/packages/linux.scm:1520
- msgid "Linux kernel modules to control keyboard on most Tuxedo computers"
- msgstr ""
- #: gnu/packages/linux.scm:1522
- msgid ""
- "This package provides the @code{tuxedo_keyboard}, @code{tuxedo_io},\n"
- "@code{clevo_wmi} @acronym{WMI, Windows Management Engine} and the\n"
- "@code{clevo_acpi} @acronym{ACPI, Advanced Configuration and Power Interface}\n"
- "kernel modules to control the keyboard on most Tuxedo computers. Only white\n"
- "backlight only models are currently not supported. The @code{tuxedo_io} module\n"
- "is also needed for the @code{tuxedo-control-center} (short tcc) package."
- msgstr ""
- #: gnu/packages/linux.scm:1551
- msgid "EVDI Linux kernel module"
- msgstr ""
- #: gnu/packages/linux.scm:1553
- msgid ""
- "The @acronym{EVDI, Extensible Virtual Display Interface} is a Linux kernel module\n"
- "that enables management of multiple screens, allowing user-space programs to\n"
- "take control over what happens with the image."
- msgstr ""
- #: gnu/packages/linux.scm:1576
- msgid "Utility for reading or writing @acronym{EC, Embedded Controller} registers"
- msgstr ""
- #: gnu/packages/linux.scm:1578
- msgid ""
- "This utility can read or write specific registers or all the available\n"
- "registers of the @acronym{EC, Embedded Controller} supported by the\n"
- "@code{ec_sys} Linux driver."
- msgstr ""
- #: gnu/packages/linux.scm:1608
- msgid "Linux Kernel Runtime Guard"
- msgstr ""
- #: gnu/packages/linux.scm:1610
- msgid ""
- "This package performs runtime integrity checking of the Linux kernel and\n"
- "detection of security vulnerability exploits against the kernel."
- msgstr ""
- #: gnu/packages/linux.scm:1630
- msgid "Linux kernel module that emulates SCSI devices"
- msgstr ""
- #: gnu/packages/linux.scm:1632
- msgid ""
- "The @acronym{VHBA, Virtual SCSI Host Bus Adapter} module is the link\n"
- "between the CDemu user-space daemon and the kernel Linux. It acts as a\n"
- "low-level SCSI driver that emulates a virtual SCSI adapter which can have\n"
- "multiple virtual devices attached to it. Its typical use with CDEmu is to\n"
- "emulate optical devices such as DVD and CD-ROM drives."
- msgstr ""
- #: gnu/packages/linux.scm:1662
- msgid "Kernel module that disables discrete Nvidia graphics cards"
- msgstr ""
- #: gnu/packages/linux.scm:1663
- msgid ""
- "The bbswitch module provides a way to toggle the Nvidia\n"
- "graphics card on Optimus laptops."
- msgstr ""
- #: gnu/packages/linux.scm:1701
- msgid "Pair of Linux kernel drivers for DDC/CI monitors"
- msgstr ""
- #: gnu/packages/linux.scm:1702
- msgid ""
- "This package provides two Linux kernel drivers, ddcci and\n"
- "ddcci-backlight, that allows the control of DDC/CI monitors through the sysfs\n"
- "interface. The ddcci module creates a character device for each DDC/CI\n"
- "monitors in @file{/dev/bus/ddcci/[I²C busnumber]}. While the ddcci-backlight\n"
- "module allows the control of the backlight level or luminance property when\n"
- "supported under @file{/sys/class/backlight/}."
- msgstr ""
- #: gnu/packages/linux.scm:1727
- msgid "Linux kernel module to create virtual V4L2 video devices"
- msgstr ""
- #: gnu/packages/linux.scm:1729
- msgid ""
- "This Linux module creates virtual video devices. @acronym{V4L2, Video\n"
- "for Linux 2} applications will treat these as ordinary video devices but read\n"
- "video data generated by another application, instead of a hardware device such\n"
- "as a capture card.\n"
- "\n"
- "This lets you apply nifty effects to your Jitsi video, for example, but also\n"
- "allows some more serious things like adding streaming capabilities to an\n"
- "application by hooking GStreamer into the loopback device."
- msgstr ""
- #: gnu/packages/linux.scm:1768
- msgid "Xbox One Wireless Controller driver for the kernel Linux"
- msgstr ""
- #: gnu/packages/linux.scm:1770
- msgid ""
- "This package provides a driver for the XBox One S Wireless controller\n"
- "and some newer models when connected via Bluetooth. In addition to the included\n"
- "Linux kernel module, it also contains a modprobe configuration and udev rules,\n"
- "which need to be installed separately."
- msgstr ""
- #: gnu/packages/linux.scm:1821
- msgid "Pluggable authentication modules for Linux"
- msgstr ""
- #: gnu/packages/linux.scm:1823
- msgid ""
- "A *Free* project to implement OSF's RFC 86.0.\n"
- "Pluggable authentication modules are small shared object files that can\n"
- "be used through the PAM API to perform tasks, like authenticating a user\n"
- "at login. Local and dynamic reconfiguration are its key features."
- msgstr ""
- #: gnu/packages/linux.scm:1868
- msgid "PAM interface using ctypes"
- msgstr ""
- #: gnu/packages/linux.scm:1869
- msgid "This package provides a PAM interface using @code{ctypes}."
- msgstr ""
- #: gnu/packages/linux.scm:1897
- msgid "Unlock GnuPG keys on login"
- msgstr ""
- #: gnu/packages/linux.scm:1898
- msgid ""
- "This package provides a PAM module that hands over your\n"
- "login password to @code{gpg-agent}. This can be useful if you are using a\n"
- "GnuPG-based password manager like @code{pass}."
- msgstr ""
- #: gnu/packages/linux.scm:1944
- msgid "Documentation for the kernel Linux-Libre"
- msgstr ""
- #: gnu/packages/linux.scm:1945
- msgid ""
- "This package provides the documentation for the kernel\n"
- "Linux-Libre, as an Info manual. To consult it, run @samp{info linux}."
- msgstr ""
- #: gnu/packages/linux.scm:1970
- msgid "Utilities for accessing the powercap Linux kernel feature"
- msgstr ""
- #: gnu/packages/linux.scm:1971
- msgid ""
- "This package contains utilities for accessing the powercap\n"
- "Linux kernel feature through sysfs. It includes an implementation for working\n"
- "with Intel @acronym{RAPL, Running Average Power Limit}.\n"
- "It provides the commands @code{powercap-info} and @code{powercap-set}."
- msgstr ""
- #: gnu/packages/linux.scm:2000
- msgid "Measure system power consumption"
- msgstr ""
- #: gnu/packages/linux.scm:2002
- msgid ""
- "Powerstat measures and reports your computer's power consumption in real\n"
- "time. On mobile PCs, it uses ACPI battery information to measure the power\n"
- "drain of the entire system.\n"
- "\n"
- "Powerstat can also report @acronym{RAPL, Running Average Power Limit} power\n"
- "domain measurements. These are available only on some hardware such as Intel\n"
- "Sandybridge and newer, and cover only part of the machine's components such as\n"
- "CPU, DRAM, and graphics. However, they provide accurate and immediate readings\n"
- "and don't require a battery at all.\n"
- "\n"
- "The output is like @command{vmstat} but also shows power consumption statistics:\n"
- "at the end of a run, @command{powerstat} will calculate the average, standard\n"
- "deviation, and minimum and maximum values. It can show a nice histogram too."
- msgstr ""
- #: gnu/packages/linux.scm:2038
- msgid "Small utilities that use the proc file system"
- msgstr ""
- #: gnu/packages/linux.scm:2040
- msgid ""
- "This PSmisc package is a set of some small useful utilities that\n"
- "use the proc file system. We're not about changing the world, but\n"
- "providing the system administrator with some help in common tasks."
- msgstr ""
- #: gnu/packages/linux.scm:2178
- msgid "Collection of utilities for the Linux kernel"
- msgstr ""
- #: gnu/packages/linux.scm:2179
- msgid ""
- "Util-linux is a diverse collection of Linux kernel\n"
- "utilities. It provides dmesg and includes tools for working with file systems,\n"
- "block devices, UUIDs, TTYs, and many other tools."
- msgstr ""
- #: gnu/packages/linux.scm:2231
- msgid "PERPETUAL DATE CONVERTER FROM GREGORIAN TO POEE CALENDAR"
- msgstr ""
- #: gnu/packages/linux.scm:2233
- msgid ""
- "ddate displays the Discordian date and holidays of a given date.\n"
- "The Discordian calendar was made popular by the \"Illuminatus!\" trilogy\n"
- "by Robert Shea and Robert Anton Wilson."
- msgstr ""
- #: gnu/packages/linux.scm:2256
- msgid "FUSE driver to read/write Windows BitLocker drives"
- msgstr ""
- #: gnu/packages/linux.scm:2258
- msgid ""
- "This package provides means to to read BitLocker encrypted\n"
- "partitions. Write functionality is also provided but check the README."
- msgstr ""
- #: gnu/packages/linux.scm:2309
- msgid "Show and modify Linux frame buffer settings"
- msgstr ""
- #: gnu/packages/linux.scm:2311
- msgid ""
- "The kernel Linux's @dfn{frame buffers} provide a simple interface to\n"
- "different kinds of graphic displays. The @command{fbset} utility can query and\n"
- "change various device settings such as depth, virtual resolution, and timing\n"
- "parameters."
- msgstr ""
- #: gnu/packages/linux.scm:2354
- msgid "Utilities that give information about processes"
- msgstr ""
- #: gnu/packages/linux.scm:2356
- msgid ""
- "Procps is the package that has a bunch of small useful utilities\n"
- "that give information about processes using the Linux /proc file system.\n"
- "The package includes the programs free, pgrep, pidof, pkill, pmap, ps, pwdx,\n"
- "slabtop, tload, top, vmstat, w, watch and sysctl."
- msgstr ""
- #: gnu/packages/linux.scm:2400
- msgid "Tools for working with USB devices, such as lsusb"
- msgstr ""
- #: gnu/packages/linux.scm:2402
- msgid "Tools for working with USB devices, such as lsusb."
- msgstr ""
- #: gnu/packages/linux.scm:2424
- msgid "Utilities for sharing USB devices over IP networks"
- msgstr ""
- #: gnu/packages/linux.scm:2426
- msgid ""
- "The USB/IP protocol enables to pass USB device from a server to\n"
- "a client over the network. The server is a machine which shares an\n"
- "USB device and the client is a machine which uses USB device provided by\n"
- "a server over the network. The USB device may be either physical device\n"
- "connected to a server or software entity created on a server using USB\n"
- "gadget subsystem. The usbip-utils are userspace tools to used to handle\n"
- "connection and management on both side. The client needs the @file{vhci-hcd}\n"
- "Linux kernel module and the server needs the @file{usbip_host} Linux kernel\n"
- "module."
- msgstr ""
- #: gnu/packages/linux.scm:2507
- msgid "Creating and checking ext2/ext3/ext4 file systems"
- msgstr ""
- #: gnu/packages/linux.scm:2509
- msgid "This package provides tools for manipulating ext2/ext3/ext4 file systems."
- msgstr ""
- #: gnu/packages/linux.scm:2550
- msgid "Statically-linked e2fsck command from e2fsprogs"
- msgstr ""
- #: gnu/packages/linux.scm:2551
- msgid ""
- "This package provides statically-linked e2fsck command taken\n"
- "from the e2fsprogs package. It is meant to be used in initrds."
- msgstr ""
- #: gnu/packages/linux.scm:2572
- msgid "Recover deleted files from ext2/3/4 partitions"
- msgstr ""
- #: gnu/packages/linux.scm:2574
- msgid ""
- "Extundelete is a set of tools that can recover deleted files from an\n"
- "ext3 or ext4 partition."
- msgstr ""
- #: gnu/packages/linux.scm:2605
- msgid "Zero non-allocated regions in ext2/ext3/ext4 file systems"
- msgstr ""
- #: gnu/packages/linux.scm:2607
- msgid ""
- "Zerofree finds the unallocated blocks with non-zero value content in an\n"
- "ext2, ext3, or ext4 file system and fills them with zeroes (or another value).\n"
- "This is a simple way to make disk images more compressible.\n"
- "Zerofree requires the file system to be unmounted or mounted read-only."
- msgstr ""
- #: gnu/packages/linux.scm:2650
- msgid "System call tracer for Linux"
- msgstr ""
- #: gnu/packages/linux.scm:2652
- msgid ""
- "strace is a system call tracer, i.e. a debugging tool which prints out a\n"
- "trace of all the system calls made by a another process/program."
- msgstr ""
- #: gnu/packages/linux.scm:2675
- msgid "Library call tracer for Linux"
- msgstr ""
- #: gnu/packages/linux.scm:2677
- msgid ""
- "ltrace intercepts and records dynamic library calls which are called by\n"
- "an executed process and the signals received by that process. It can also\n"
- "intercept and print the system calls executed by the program."
- msgstr ""
- #: gnu/packages/linux.scm:2700
- msgid "The Advanced Linux Sound Architecture Use Case Manager"
- msgstr ""
- #: gnu/packages/linux.scm:2702
- msgid ""
- "This package contains Advanced Linux Sound Architecture Use Case Manager\n"
- "configuration of audio input/output names and routing for specific audio\n"
- "hardware."
- msgstr ""
- #: gnu/packages/linux.scm:2724 gnu/packages/linux.scm:2771
- msgid "The Advanced Linux Sound Architecture libraries"
- msgstr ""
- #: gnu/packages/linux.scm:2726
- msgid ""
- "This package contains Advanced Linux Sound Architecture topology\n"
- "configuration files that can be used for specific audio hardware."
- msgstr ""
- #: gnu/packages/linux.scm:2773 gnu/packages/linux.scm:2822
- msgid ""
- "The Advanced Linux Sound Architecture (ALSA) provides audio and\n"
- "MIDI functionality to the Linux-based operating system."
- msgstr ""
- #: gnu/packages/linux.scm:2820
- msgid "Utilities for the Advanced Linux Sound Architecture (ALSA)"
- msgstr ""
- #: gnu/packages/linux.scm:2889
- msgid "Plugins for the Advanced Linux Sound Architecture (ALSA)"
- msgstr ""
- #: gnu/packages/linux.scm:2891
- msgid ""
- "The Advanced Linux Sound Architecture (ALSA) provides audio and\n"
- "MIDI functionality to the Linux-based operating system. This package enhances ALSA\n"
- "by providing additional plugins which include: upmixing, downmixing, jackd and\n"
- "pulseaudio support for native alsa applications, format conversion (s16 to a52), and\n"
- "external rate conversion."
- msgstr ""
- #: gnu/packages/linux.scm:2927
- msgid "Programs to configure Linux IP packet filtering rules"
- msgstr ""
- #: gnu/packages/linux.scm:2929
- msgid ""
- "@command{iptables} is the user-space command line program used to\n"
- "configure the Linux 2.4.x and later IPv4 packet filtering ruleset\n"
- "(@dfn{firewall}), including @dfn{NAT} (Network Address Translation).\n"
- "\n"
- "This package also includes @command{ip6tables}, which is used to configure the\n"
- "IPv6 packet filter.\n"
- "\n"
- "Both commands are targeted at system administrators."
- msgstr ""
- #: gnu/packages/linux.scm:2972
- msgid "Thunderbolt 3 device manager"
- msgstr ""
- #: gnu/packages/linux.scm:2974
- msgid ""
- "This package provides @command{boltd}, a userspace daemon\n"
- "for Thunderbolt devices, and @command{boltctl}, a command-line utility for\n"
- "managing those devices.\n"
- "\n"
- "The daemon @command{boltd} exposes devices via D-Bus to clients. It also\n"
- "stores a database of previously authorized devices and will, depending on the\n"
- "policy set for the individual devices, automatically authorize newly connected\n"
- "devices without user interaction.\n"
- "\n"
- "The command-line utility @command{boltctl} manages Thunderbolt devices via\n"
- "@command{boltd}. It can list devices, monitor changes, and initiate\n"
- "authorization of devices."
- msgstr ""
- #: gnu/packages/linux.scm:3014
- msgid "CPU jitter random number generator daemon"
- msgstr ""
- #: gnu/packages/linux.scm:3016
- msgid ""
- "This simple daemon feeds entropy from the CPU Jitter @acronym{RNG, random\n"
- "number generator} core to the kernel Linux's entropy estimator. This prevents\n"
- "the @file{/dev/random} device from blocking and should benefit users of the\n"
- "preferred @file{/dev/urandom} and @code{getrandom()} interfaces too.\n"
- "\n"
- "The CPU Jitter RNG itself is part of the kernel and claims to provide good\n"
- "entropy by collecting and magnifying differences in CPU execution time as\n"
- "measured by the high-resolution timer built into modern CPUs. It requires no\n"
- "additional hardware or external entropy source.\n"
- "\n"
- "The random bit stream generated by @command{jitterentropy-rngd} is not processed\n"
- "by a cryptographically secure whitening function. Nonetheless, its authors\n"
- "believe it to be a suitable source of cryptographically secure key material or\n"
- "other cryptographically sensitive data.\n"
- "\n"
- "If you agree with them, start this daemon as early as possible to provide\n"
- "properly seeded random numbers to services like SSH or those using TLS during\n"
- "early boot when entropy may be low, especially in virtualised environments."
- msgstr ""
- #: gnu/packages/linux.scm:3049
- msgid "Lists information about SCSI or NVMe devices in Linux"
- msgstr ""
- #: gnu/packages/linux.scm:3052
- msgid ""
- "@command{lsscsi} lists SCSI logical units or SCSI targets. It can\n"
- "also list NVMe namespaces or controllers and show the relationship between a\n"
- "device's primary node name, its SCSI generic (sg) node name and its kernel\n"
- "name."
- msgstr ""
- #: gnu/packages/linux.scm:3073
- msgid "Ethernet bridge frame table administration"
- msgstr ""
- #: gnu/packages/linux.scm:3076
- msgid ""
- "ebtables is an application program used to set up and maintain the\n"
- "tables of rules (inside the Linux kernel) that inspect Ethernet frames. It is\n"
- "analogous to the iptables application, but less complicated, due to the fact\n"
- "that the Ethernet protocol is much simpler than the IP protocol."
- msgstr ""
- #: gnu/packages/linux.scm:3139
- msgid "Utilities for controlling TCP/IP networking and traffic in Linux"
- msgstr ""
- #: gnu/packages/linux.scm:3141
- msgid ""
- "Iproute2 is a collection of utilities for controlling TCP/IP networking\n"
- "and traffic with the Linux kernel. The most important of these are\n"
- "@command{ip}, which configures IPv4 and IPv6, and @command{tc} for traffic\n"
- "control.\n"
- "\n"
- "Most network configuration manuals still refer to ifconfig and route as the\n"
- "primary network configuration tools, but ifconfig is known to behave\n"
- "inadequately in modern network environments, and both should be deprecated."
- msgstr ""
- #: gnu/packages/linux.scm:3219
- msgid "Tools for controlling the network subsystem in Linux"
- msgstr ""
- #: gnu/packages/linux.scm:3221
- msgid ""
- "This package includes the important tools for controlling the network\n"
- "subsystem of the Linux kernel. This includes arp, ifconfig, netstat, rarp and\n"
- "route. Additionally, this package contains utilities relating to particular\n"
- "network hardware types (plipconfig, slattach) and advanced aspects of IP\n"
- "configuration (iptunnel, ipmaddr)."
- msgstr ""
- #: gnu/packages/linux.scm:3261
- msgid "Library for working with POSIX capabilities"
- msgstr ""
- #: gnu/packages/linux.scm:3263
- msgid ""
- "Libcap2 provides a programming interface to POSIX capabilities on\n"
- "Linux-based operating systems."
- msgstr ""
- #: gnu/packages/linux.scm:3288
- msgid "Manipulate Ethernet bridges"
- msgstr ""
- #: gnu/packages/linux.scm:3290
- msgid ""
- "Utilities for Linux's Ethernet bridging facilities. A bridge is a way\n"
- "to connect two Ethernet segments together in a protocol independent way.\n"
- "Packets are forwarded based on Ethernet address, rather than IP address (like\n"
- "a router). Since forwarding is done at Layer 2, all protocols can go\n"
- "transparently through a bridge."
- msgstr ""
- #: gnu/packages/linux.scm:3339
- msgid "NetLink protocol library suite"
- msgstr ""
- #: gnu/packages/linux.scm:3341
- msgid ""
- "The libnl suite is a collection of libraries providing APIs to netlink\n"
- "protocol based Linux kernel interfaces. Netlink is an IPC mechanism primarily\n"
- "between the kernel and user space processes. It was designed to be a more\n"
- "flexible successor to ioctl to provide mainly networking related kernel\n"
- "configuration and monitoring interfaces."
- msgstr ""
- #: gnu/packages/linux.scm:3413
- msgid "Tool for configuring wireless devices"
- msgstr ""
- #: gnu/packages/linux.scm:3415
- msgid ""
- "iw is a new nl80211 based CLI configuration utility for wireless\n"
- "devices. It replaces @code{iwconfig}, which is deprecated."
- msgstr ""
- #: gnu/packages/linux.scm:3462
- msgid "Analyze power consumption on Intel-based laptops"
- msgstr ""
- #: gnu/packages/linux.scm:3464
- msgid ""
- "PowerTOP is a Linux tool to diagnose issues with power consumption and\n"
- "power management. In addition to being a diagnostic tool, PowerTOP also has\n"
- "an interactive mode where the user can experiment various power management\n"
- "settings for cases where the operating system has not enabled these\n"
- "settings."
- msgstr ""
- #: gnu/packages/linux.scm:3489
- msgid "Audio mixer for X and the console"
- msgstr ""
- #: gnu/packages/linux.scm:3491
- msgid ""
- "Aumix adjusts an audio mixer from X, the console, a terminal,\n"
- "the command line or a script."
- msgstr ""
- #: gnu/packages/linux.scm:3525
- msgid "Displays the IO activity of running processes"
- msgstr ""
- #: gnu/packages/linux.scm:3527
- msgid ""
- "Iotop is a Python program with a top like user interface to show the\n"
- "processes currently causing I/O."
- msgstr ""
- #: gnu/packages/linux.scm:3556
- msgid "Interactive @command{top}-like input/output activity monitor"
- msgstr ""
- #: gnu/packages/linux.scm:3558
- msgid ""
- "iotop identifies which processes and threads are most responsible for\n"
- "@acronym{I/O, input/output} activity such as disc reads and writes. It sorts\n"
- "them in a live, interactive table overview similar to that of the well-known\n"
- "@command{top}.\n"
- "\n"
- "This information makes it much easier for an administrator to see which tasks\n"
- "are blocking others and adjust their priority (using @command{ionice}) or stop\n"
- "or kill them altogether."
- msgstr ""
- #: gnu/packages/linux.scm:3627
- msgid "Support file systems implemented in user space"
- msgstr ""
- #: gnu/packages/linux.scm:3629
- msgid ""
- "As a consequence of its monolithic design, file system code for Linux\n"
- "normally goes into the kernel itself---which is not only a robustness issue,\n"
- "but also an impediment to system extensibility. FUSE, for \"file systems in\n"
- "user space\", is a kernel module and user-space library that tries to address\n"
- "part of this problem by allowing users to run file system implementations as\n"
- "user-space processes."
- msgstr ""
- #: gnu/packages/linux.scm:3720
- msgid "User-space union file system"
- msgstr ""
- #: gnu/packages/linux.scm:3722
- msgid ""
- "UnionFS-FUSE is a flexible union file system implementation in user\n"
- "space, using the FUSE library. Mounting a union file system allows you to\n"
- "\"aggregate\" the contents of several directories into a single mount point.\n"
- "UnionFS-FUSE additionally supports copy-on-write."
- msgstr ""
- #: gnu/packages/linux.scm:3750
- msgid "User-space union file system (statically linked)"
- msgstr ""
- #: gnu/packages/linux.scm:3804
- msgid "Mount remote file systems over SSH"
- msgstr ""
- #: gnu/packages/linux.scm:3806
- msgid ""
- "This is a file system client based on the SSH File Transfer Protocol.\n"
- "Since most SSH servers already support this protocol it is very easy to set\n"
- "up: on the server side there's nothing to do; on the client side mounting the\n"
- "file system is as easy as logging into the server with an SSH client."
- msgstr ""
- #: gnu/packages/linux.scm:3832
- msgid "Tool for mounting archive files with FUSE"
- msgstr ""
- #: gnu/packages/linux.scm:3833
- msgid ""
- "archivemount is a FUSE-based file system for Unix variants,\n"
- "including Linux. Its purpose is to mount archives (i.e. tar, tar.gz, etc.) to a\n"
- "mount point where it can be read from or written to as with any other file\n"
- "system. This makes accessing the contents of the archive, which may be\n"
- "compressed, transparent to other programs, without decompressing them."
- msgstr ""
- #: gnu/packages/linux.scm:3861
- msgid "Tools for non-uniform memory access (NUMA) machines"
- msgstr ""
- #: gnu/packages/linux.scm:3863
- msgid ""
- "NUMA stands for Non-Uniform Memory Access, in other words a system whose\n"
- "memory is not all in one place. The @command{numactl} program allows you to\n"
- "run your application program on specific CPUs and memory nodes. It does this\n"
- "by supplying a NUMA memory policy to the operating system before running your\n"
- "program.\n"
- "\n"
- "The package contains other commands, such as @command{numastat},\n"
- "@command{memhog}, and @command{numademo} which provides a quick overview of\n"
- "NUMA performance on your system."
- msgstr ""
- #: gnu/packages/linux.scm:3899
- msgid "Neo2 console layout"
- msgstr ""
- #: gnu/packages/linux.scm:3901
- msgid ""
- "Kbd-neo provides the Neo2 keyboard layout for use with\n"
- "@command{loadkeys(1)} from @code{kbd(4)}."
- msgstr ""
- #: gnu/packages/linux.scm:3965
- msgid "Linux keyboard utilities and keyboard maps"
- msgstr ""
- #: gnu/packages/linux.scm:3967
- msgid ""
- "This package contains keytable files and keyboard utilities compatible\n"
- "for systems using the Linux kernel. This includes commands such as\n"
- "@code{loadkeys}, @code{setfont}, @code{kbdinfo}, and @code{chvt}."
- msgstr ""
- #: gnu/packages/linux.scm:4002
- msgid "Statically-linked @command{loadkeys} program"
- msgstr ""
- #: gnu/packages/linux.scm:4028
- msgid "Monitor file accesses"
- msgstr ""
- #: gnu/packages/linux.scm:4030
- msgid ""
- "The inotify-tools packages provides a C library and command-line tools\n"
- "to use Linux' inotify mechanism, which allows file accesses to be monitored."
- msgstr ""
- #: gnu/packages/linux.scm:4081
- msgid "Kernel module tools"
- msgstr ""
- #: gnu/packages/linux.scm:4082
- msgid ""
- "Kmod is a set of tools to handle common tasks with Linux\n"
- "kernel modules like insert, remove, list, check properties, resolve\n"
- "dependencies and aliases.\n"
- "\n"
- "These tools are designed on top of libkmod, a library that is shipped with\n"
- "kmod. The aim is to be compatible with tools, configurations and indices\n"
- "from the module-init-tools project."
- msgstr ""
- #: gnu/packages/linux.scm:4137
- msgid "Simple out of memory (OOM) daemon for the Linux kernel"
- msgstr ""
- #: gnu/packages/linux.scm:4138
- msgid ""
- "Early OOM is a minimalist out of memory (OOM) daemon that\n"
- "runs in user space and provides a more responsive and configurable alternative\n"
- "to the in-kernel OOM killer."
- msgstr ""
- #: gnu/packages/linux.scm:4217
- msgid "Userspace device management"
- msgstr ""
- #: gnu/packages/linux.scm:4218
- msgid ""
- "Udev is a daemon which dynamically creates and removes\n"
- "device nodes from /dev/, handles hotplug events and loads drivers at boot\n"
- "time."
- msgstr ""
- #: gnu/packages/linux.scm:4246
- msgid "Bindings to the Linux input handling subsystem"
- msgstr ""
- #: gnu/packages/linux.scm:4248
- msgid ""
- "Python-evdev provides bindings to the generic input event interface in\n"
- "Linux. The @code{evdev} interface serves the purpose of passing events\n"
- "generated in the kernel directly to userspace through character devices that\n"
- "are typically located in @file{/dev/input/}.\n"
- "\n"
- "This package also comes with bindings to @code{uinput}, the userspace input\n"
- "subsystem. @code{uinput} allows userspace programs to create and handle input\n"
- "devices that can inject events directly into the input subsystem."
- msgstr ""
- #: gnu/packages/linux.scm:4279
- msgid "Utilities for operating on input events of evdev devices"
- msgstr ""
- #: gnu/packages/linux.scm:4281
- msgid ""
- "Interception Tools provides a composable infrastructure on top of\n"
- "@code{libudev} and @code{libevdev}. The following utilities are provided:\n"
- "\n"
- "@itemize\n"
- "@item @command{udevmon} --- monitor input devices for launching tasks\n"
- "@item @command{intercept} --- redirect device input events to stdout\n"
- "@item @command{uinput} --- redirect device input events from stding to virtual device\n"
- "@item @command{mux} --- mux streams of input events\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/linux.scm:4328
- msgid "Tap for one key, hold for another"
- msgstr ""
- #: gnu/packages/linux.scm:4330
- msgid ""
- "Dual Function Keys is a plugin for @code{interception-tools} that allows\n"
- "one to send arbitrary keycodes when a given key is tapped or held."
- msgstr ""
- #: gnu/packages/linux.scm:4414
- msgid "Logical volume management for Linux"
- msgstr ""
- #: gnu/packages/linux.scm:4416
- msgid ""
- "LVM2 is the logical volume management tool set for Linux-based systems.\n"
- "This package includes the user-space libraries and tools, including the device\n"
- "mapper. Kernel components are part of Linux-libre."
- msgstr ""
- #: gnu/packages/linux.scm:4456
- msgid "Logical volume management for Linux (statically linked)"
- msgstr ""
- #: gnu/packages/linux.scm:4481
- msgid "Tools for manipulating the metadata of device-mapper targets"
- msgstr ""
- #: gnu/packages/linux.scm:4482
- msgid ""
- "A suite of tools for manipulating the metadata of the\n"
- "dm-thin, dm-cache and dm-era device-mapper targets."
- msgstr ""
- #: gnu/packages/linux.scm:4503
- msgid "Advanced system & process supervisor for Linux"
- msgstr ""
- #: gnu/packages/linux.scm:4504
- msgid ""
- "This package provides an advanced monitor of critical system\n"
- "resources, supervises the heartbeat of processes, records deadline\n"
- "transgressions, and initiates a controlled reset if needed."
- msgstr ""
- #: gnu/packages/linux.scm:4548
- msgid "Tools for manipulating Linux Wireless Extensions"
- msgstr ""
- #: gnu/packages/linux.scm:4549
- msgid ""
- "Wireless Tools are used to manipulate the now-deprecated\n"
- "Linux Wireless Extensions; consider using @code{iw} instead. The Wireless\n"
- "Extension was an interface allowing you to set Wireless LAN specific\n"
- "parameters and get the specific stats. It is deprecated in favor the nl80211\n"
- "interface."
- msgstr ""
- #: gnu/packages/linux.scm:4638
- msgid "Central regulatory domain agent (CRDA) for WiFi"
- msgstr ""
- #: gnu/packages/linux.scm:4640
- msgid ""
- "The Central Regulatory Domain Agent (CRDA) acts as the udev helper for\n"
- "communication between the kernel Linux and user space for regulatory\n"
- "compliance."
- msgstr ""
- #: gnu/packages/linux.scm:4708
- msgid "Wireless regulatory database"
- msgstr ""
- #: gnu/packages/linux.scm:4710
- msgid ""
- "This package contains the wireless regulatory database for the Central\n"
- "Regulatory Database Agent (CRDA). The database contains information on\n"
- "country-specific regulations for the wireless spectrum."
- msgstr ""
- #: gnu/packages/linux.scm:4782
- msgid "Utilities to read temperature/voltage/fan sensors"
- msgstr ""
- #: gnu/packages/linux.scm:4784
- msgid ""
- "Lm-sensors is a hardware health monitoring package for Linux. It allows\n"
- "you to access information from temperature, voltage, and fan speed sensors.\n"
- "It works with most newer systems."
- msgstr ""
- #: gnu/packages/linux.scm:4802
- msgid "Manipulate Intel microcode bundles"
- msgstr ""
- #: gnu/packages/linux.scm:4804
- msgid ""
- "@command{iucode_tool} is a utility to work with microcode packages for\n"
- "Intel processors. It can convert between formats, extract specific versions,\n"
- "create a firmware image suitable for the Linux kernel, and more."
- msgstr ""
- #: gnu/packages/linux.scm:4835
- msgid "I2C tools for Linux"
- msgstr ""
- #: gnu/packages/linux.scm:4837
- msgid ""
- "The i2c-tools package contains a heterogeneous set of I2C tools for\n"
- "Linux: a bus probing tool, a chip dumper, register-level SMBus access helpers,\n"
- "EEPROM decoding scripts, EEPROM programming tools, and a python module for\n"
- "SMBus access."
- msgstr ""
- #: gnu/packages/linux.scm:4892
- msgid "Hardware health information viewer"
- msgstr ""
- #: gnu/packages/linux.scm:4894
- msgid ""
- "Xsensors reads data from the libsensors library regarding hardware\n"
- "health such as temperature, voltage and fan speed and displays the information\n"
- "in a digital read-out."
- msgstr ""
- #: gnu/packages/linux.scm:4952
- msgid "Linux profiling with performance counters"
- msgstr ""
- #: gnu/packages/linux.scm:4954
- msgid ""
- "perf is a tool suite for profiling using hardware performance counters,\n"
- "with support in the Linux kernel. perf can instrument CPU performance\n"
- "counters, tracepoints, kprobes, and uprobes (dynamic tracing). It is capable\n"
- "of lightweight profiling. This package contains the user-land tools and in\n"
- "particular the @code{perf} command."
- msgstr ""
- #: gnu/packages/linux.scm:4978
- msgid "Simple tool for creating Linux namespace containers"
- msgstr ""
- #: gnu/packages/linux.scm:4979
- msgid ""
- "pflask is a simple tool for creating Linux namespace\n"
- "containers. It can be used for running a command or even booting an OS inside\n"
- "an isolated container, created with the help of Linux namespaces. It is\n"
- "similar in functionality to chroot, although pflask provides better isolation\n"
- "thanks to the use of namespaces."
- msgstr ""
- #: gnu/packages/linux.scm:5063
- msgid "Container platform"
- msgstr ""
- #: gnu/packages/linux.scm:5064
- msgid ""
- "Singularity is a container platform supporting a number of\n"
- "container image formats. It can build SquashFS container images or import\n"
- "existing Docker images. Singularity requires kernel support for container\n"
- "isolation or root privileges."
- msgstr ""
- #: gnu/packages/linux.scm:5094
- msgid "View and tune ATA disk drive parameters"
- msgstr ""
- #: gnu/packages/linux.scm:5096
- msgid ""
- "@command{hdparm} is a command-line utility to control ATA controllers and\n"
- "disk drives. It can increase performance and/or reliability by careful tuning\n"
- "of hardware settings like power and acoustic management, DMA modes, and caching.\n"
- "It can also display detailed device information, or be used as a simple\n"
- "performance benchmarking tool.\n"
- "\n"
- "@command{hdparm} provides a command line interface to various Linux kernel\n"
- "interfaces provided by the SATA/ATA/SAS @code{libata} subsystem, and the older\n"
- "IDE driver subsystem. Many external USB drive enclosures with SCSI-ATA Command\n"
- "Translation (@dfn{SAT}) are also supported."
- msgstr ""
- #: gnu/packages/linux.scm:5130
- msgid "C Library for NVM Express on Linux"
- msgstr ""
- #: gnu/packages/linux.scm:5131
- msgid ""
- "libnvme provides type definitions for NVMe specification\n"
- "structures, enumerations, and bit fields, helper functions to construct,\n"
- "dispatch, and decode commands and payloads, and utilities to connect, scan,\n"
- "and manage nvme devices on a Linux system."
- msgstr ""
- #: gnu/packages/linux.scm:5158
- msgid "NVM-Express user space tooling for Linux"
- msgstr ""
- #: gnu/packages/linux.scm:5159
- msgid ""
- "Nvme-cli is a utility to provide standards compliant tooling\n"
- "for NVM-Express drives. It was made specifically for Linux as it relies on the\n"
- "IOCTLs defined by the mainline kernel driver."
- msgstr ""
- #: gnu/packages/linux.scm:5183
- msgid "Tool for enabling and disabling wireless devices"
- msgstr ""
- #: gnu/packages/linux.scm:5185
- msgid ""
- "rfkill is a simple tool for accessing the rfkill device interface,\n"
- "which is used to enable and disable wireless networking devices, typically\n"
- "WLAN, Bluetooth and mobile broadband."
- msgstr ""
- #: gnu/packages/linux.scm:5206
- msgid "Display information on ACPI devices"
- msgstr ""
- #: gnu/packages/linux.scm:5207
- msgid ""
- "@code{acpi} attempts to replicate the functionality of the\n"
- "\"old\" @code{apm} command on ACPI systems, including battery and thermal\n"
- "information. It does not support ACPI suspending, only displays information\n"
- "about ACPI devices."
- msgstr ""
- #: gnu/packages/linux.scm:5226
- msgid "Daemon for delivering ACPI events to user-space programs"
- msgstr ""
- #: gnu/packages/linux.scm:5228
- msgid ""
- "acpid is designed to notify user-space programs of Advanced\n"
- "Configuration and Power Interface (ACPI) events. acpid should be started\n"
- "during the system boot, and will run as a background process. When an ACPI\n"
- "event is received from the kernel, acpid will examine the list of rules\n"
- "specified in /etc/acpi/events and execute the rules that match the event."
- msgstr ""
- #: gnu/packages/linux.scm:5250
- msgid "System utilities based on Linux sysfs"
- msgstr ""
- #: gnu/packages/linux.scm:5252
- msgid ""
- "These are a set of utilities built upon sysfs, a virtual file system in\n"
- "Linux kernel versions 2.5+ that exposes a system's device tree. The package\n"
- "also contains the libsysfs library."
- msgstr ""
- #: gnu/packages/linux.scm:5298
- msgid "Utilities to get and set CPU frequency on Linux"
- msgstr ""
- #: gnu/packages/linux.scm:5300
- msgid ""
- "The cpufrequtils suite contains utilities to retrieve CPU frequency\n"
- "information, and set the CPU frequency if supported, using the cpufreq\n"
- "capabilities of the Linux kernel."
- msgstr ""
- #: gnu/packages/linux.scm:5336
- msgid "Library providing missing pieces in GNU libc"
- msgstr ""
- #: gnu/packages/linux.scm:5337
- msgid ""
- "This package provides many of the missing pieces in GNU\n"
- "libc. Most notably the string functions: strlcpy(3), strlcat(3) and the *BSD\n"
- "sys/queue.h and sys/tree.h API's."
- msgstr ""
- #: gnu/packages/linux.scm:5359
- msgid "Lightweight event loop library for epoll family APIs"
- msgstr ""
- #: gnu/packages/linux.scm:5360
- msgid ""
- "This package provides small event loop that wraps the\n"
- "epoll family of APIs."
- msgstr ""
- "이 꾸러미는 API의 epoll 제품군을 감싸는 작은 이벤트\n"
- "루프를 제공합니다."
- #: gnu/packages/linux.scm:5379
- msgid "Interface library for the Linux IEEE1394 drivers"
- msgstr ""
- #: gnu/packages/linux.scm:5381
- msgid ""
- "Libraw1394 is the only supported interface to the kernel side raw1394 of\n"
- "the Linux IEEE-1394 subsystem, which provides direct access to the connected\n"
- "1394 buses to user space. Through libraw1394/raw1394, applications can directly\n"
- "send to and receive from other nodes without requiring a kernel driver for the\n"
- "protocol in question."
- msgstr ""
- #: gnu/packages/linux.scm:5405
- msgid "AV/C protocol library for IEEE 1394"
- msgstr ""
- #: gnu/packages/linux.scm:5407
- msgid ""
- "Libavc1394 is a programming interface to the AV/C specification from\n"
- "the 1394 Trade Association. AV/C stands for Audio/Video Control."
- msgstr ""
- #: gnu/packages/linux.scm:5429
- msgid "Isochronous streaming media library for IEEE 1394"
- msgstr ""
- #: gnu/packages/linux.scm:5431
- msgid ""
- "The libiec61883 library provides a higher level API for streaming DV,\n"
- "MPEG-2 and audio over Linux IEEE 1394."
- msgstr ""
- #: gnu/packages/linux.scm:5480
- msgid "Tool for managing Linux Software RAID arrays"
- msgstr ""
- #: gnu/packages/linux.scm:5482
- msgid ""
- "mdadm is a tool for managing Linux Software RAID arrays. It can create,\n"
- "assemble, report on, and monitor arrays. It can also move spares between raid\n"
- "arrays when needed."
- msgstr ""
- #: gnu/packages/linux.scm:5515
- msgid "Statically-linked 'mdadm' command for use in an initrd"
- msgstr ""
- #: gnu/packages/linux.scm:5596
- msgid "Access block devices through multiple paths"
- msgstr ""
- #: gnu/packages/linux.scm:5598
- msgid ""
- "This package provides the following binaries to drive the\n"
- "Linux Device Mapper multipathing driver:\n"
- "@enumerate\n"
- "@item @command{multipath} - Device mapper target autoconfig.\n"
- "@item @command{multipathd} - Multipath daemon.\n"
- "@item @command{mpathpersist} - Manages SCSI persistent reservations on\n"
- "@code{dm} multipath devices.\n"
- "@item @command{kpartx} - Create device maps from partition tables.\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/linux.scm:5653
- msgid "Linux-native asynchronous I/O access library"
- msgstr ""
- #: gnu/packages/linux.scm:5655
- msgid ""
- "This library enables userspace to use Linux kernel asynchronous I/O\n"
- "system calls, important for the performance of databases and other advanced\n"
- "applications."
- msgstr ""
- #: gnu/packages/linux.scm:5697
- msgid "Block layer IO tracing mechanism"
- msgstr ""
- #: gnu/packages/linux.scm:5698
- msgid ""
- "Blktrace is a block layer IO tracing mechanism which provides\n"
- "detailed information about request queue operations to user space. It extracts\n"
- "event traces from the kernel (via the relaying through the debug file system)."
- msgstr ""
- #: gnu/packages/linux.scm:5721
- msgid "Bluetooth subband audio codec"
- msgstr ""
- #: gnu/packages/linux.scm:5723
- msgid ""
- "The SBC is a digital audio encoder and decoder used to transfer data to\n"
- "Bluetooth audio output devices like headphones or loudspeakers."
- msgstr ""
- #: gnu/packages/linux.scm:5784
- msgid "Linux Bluetooth protocol stack"
- msgstr ""
- #: gnu/packages/linux.scm:5786
- msgid ""
- "BlueZ provides support for the core Bluetooth layers and protocols. It\n"
- "is flexible, efficient and uses a modular implementation."
- msgstr ""
- #: gnu/packages/linux.scm:5808
- msgid "Mount exFAT file systems"
- msgstr ""
- #: gnu/packages/linux.scm:5810
- msgid ""
- "This package provides a FUSE-based file system that provides read and\n"
- "write access to exFAT devices."
- msgstr ""
- #: gnu/packages/linux.scm:5831
- msgid "Mount ISO file system images"
- msgstr ""
- #: gnu/packages/linux.scm:5833
- msgid ""
- "FuseISO is a FUSE module to mount ISO file system images (.iso, .nrg,\n"
- ".bin, .mdf and .img files). It supports plain ISO9660 Level 1 and 2, Rock\n"
- "Ridge, Joliet, and zisofs."
- msgstr ""
- #: gnu/packages/linux.scm:5885
- msgid "Mouse support for the Linux console"
- msgstr ""
- #: gnu/packages/linux.scm:5887
- msgid ""
- "The GPM (general-purpose mouse) daemon is a mouse server for\n"
- "applications running on the Linux console. It allows users to select items\n"
- "and copy/paste text in the console and in xterm."
- msgstr ""
- #: gnu/packages/linux.scm:5959
- msgid "Create and manage btrfs copy-on-write file systems"
- msgstr ""
- #: gnu/packages/linux.scm:5960
- msgid ""
- "Btrfs is a @acronym{CoW, copy-on-write} file system for Linux\n"
- "aimed at implementing advanced features while focusing on fault tolerance,\n"
- "repair and easy administration."
- msgstr ""
- #: gnu/packages/linux.scm:5993
- msgid "Statically-linked btrfs command from btrfs-progs"
- msgstr ""
- #: gnu/packages/linux.scm:5994
- msgid ""
- "This package provides the statically-linked @command{btrfs}\n"
- "from the btrfs-progs package. It is meant to be used in initrds."
- msgstr ""
- #: gnu/packages/linux.scm:6025
- msgid "Tools to manage Cramfs file systems"
- msgstr ""
- #: gnu/packages/linux.scm:6026
- msgid ""
- "Cramfs is a Linux file system designed to be simple, small,\n"
- "and to compress things well. It is used on a number of embedded systems and\n"
- "small devices. This version has additional features such as uncompressed\n"
- "blocks and random block placement."
- msgstr ""
- #: gnu/packages/linux.scm:6060
- msgid "Find compression type/ratio on Btrfs files"
- msgstr ""
- #: gnu/packages/linux.scm:6061
- msgid ""
- "@command{compsize} takes a list of files (given as\n"
- "arguments) on a Btrfs file system and measures used compression types and\n"
- "effective compression ratio, producing a report.\n"
- "\n"
- "A directory has no extents but has a (recursive) list of files. A non-regular\n"
- "file is silently ignored.\n"
- "\n"
- "As it makes no sense to talk about compression ratio of a partial extent,\n"
- "every referenced extent is counted whole, exactly once -- no matter if you use\n"
- "only a few bytes of a 1GB extent or reflink it a thousand times. Thus, the\n"
- "uncompressed size will not match the number given by @command{tar} or\n"
- "@command{du}. On the other hand, the space used should be accurate (although\n"
- "obviously it can be shared with files outside our set)."
- msgstr ""
- #: gnu/packages/linux.scm:6096
- msgid "Userland tools for f2fs"
- msgstr ""
- #: gnu/packages/linux.scm:6098
- msgid ""
- "F2FS, the Flash-Friendly File System, is a modern file system\n"
- "designed to be fast and durable on flash devices such as solid-state\n"
- "disks and SD cards. This package provides the userland utilities."
- msgstr ""
- #: gnu/packages/linux.scm:6190
- msgid "Statically-linked fsck.f2fs command from f2fs-tools"
- msgstr ""
- #: gnu/packages/linux.scm:6191
- msgid ""
- "This package provides statically-linked fsck.f2fs command taken\n"
- "from the f2fs-tools package. It is meant to be used in initrds."
- msgstr ""
- #: gnu/packages/linux.scm:6220
- msgid "Free-fall protection for spinning laptop hard drives"
- msgstr ""
- #: gnu/packages/linux.scm:6222
- msgid ""
- "Prevents shock damage to the internal spinning hard drive(s) of some\n"
- "HP and Dell laptops. When sudden movement is detected, all input/output\n"
- "operations on the drive are suspended and its heads are parked on the ramp,\n"
- "where they are less likely to cause damage to the spinning disc. Requires a\n"
- "drive that supports the ATA/ATAPI-7 IDLE IMMEDIATE command with unload\n"
- "feature, and a laptop with an accelerometer. It has no effect on SSDs."
- msgstr ""
- #: gnu/packages/linux.scm:6258
- msgid "NoteBook FanControl ported to Linux"
- msgstr ""
- #: gnu/packages/linux.scm:6260
- msgid ""
- "This package provides a C port of NoteBook FanControl (NBFC), a fan\n"
- "control service for notebooks. It provides the same utilities with the same\n"
- "interfaces as the original NBFC, although the implementation differs."
- msgstr ""
- #: gnu/packages/linux.scm:6312
- msgid "Simple fan control program"
- msgstr ""
- #: gnu/packages/linux.scm:6314
- msgid ""
- "Thinkfan is a simple fan control program. It reads temperatures,\n"
- "checks them against configured limits and switches to appropriate (also\n"
- "pre-configured) fan level. It requires a working @code{thinkpad_acpi} or any\n"
- "other @code{hwmon} driver that enables temperature reading and fan control\n"
- "from userspace."
- msgstr ""
- #: gnu/packages/linux.scm:6368
- msgid "ThinkPad battery charge controller"
- msgstr ""
- #: gnu/packages/linux.scm:6370
- msgid ""
- "Tpacpi-bat is a command-line interface to control battery charging on\n"
- "@uref{https://github.com/teleshoes/tpacpi-bat/wiki/Supported-Hardware, Lenovo\n"
- "ThinkPad models released after 2011}, starting with the xx20 series. It can\n"
- "query and set the thresholds at which one or both batteries will start and stop\n"
- "charging, inhibit charging batteries for a set period of time, or force them to\n"
- "discharge when they otherwise would not.\n"
- "\n"
- "This tool merely exposes ACPI calls provided by the @code{acpi_call} Linux\n"
- "kernel module provided by the @code{acpi-call-linux-module} package, which must\n"
- "be installed and loaded separately. Only the original vendor firmware is\n"
- "supported."
- msgstr ""
- #: gnu/packages/linux.scm:6412
- msgid "Monitor and test the Linux thermal subsystem in real time"
- msgstr ""
- #: gnu/packages/linux.scm:6414
- msgid ""
- "Tmon is a tool to interact with the complex thermal subsystem of the\n"
- "kernel Linux. It helps visualize thermal relationships and real-time thermal\n"
- "data, tune and test cooling devices and sensors, and collect thermal data for\n"
- "further analysis.\n"
- "\n"
- "As computers become smaller and more thermally constrained, more sensors are\n"
- "added and new cooling capabilities introduced. Thermal relationships can change\n"
- "dynamically. Their complexity grows exponentially among cooling devices, zones,\n"
- "sensors, and trip points.\n"
- "\n"
- "Linux exposes this relationship through @file{/sys/class/thermal} with a matrix\n"
- "of symbolic links, trip point bindings, and device instances. To traverse it\n"
- "by hand is no trivial task: @command{tmon} aims to make it understandable."
- msgstr ""
- #: gnu/packages/linux.scm:6454
- msgid "Report x86 processor frequency and idle statistics"
- msgstr ""
- #: gnu/packages/linux.scm:6456
- msgid ""
- "Turbostat reports x86 processor topology, frequency, idle power state\n"
- "statistics, temperature, and power consumption. Some information is unavailable\n"
- "on older processors.\n"
- "\n"
- "It can be used to identify machines that are inefficient in terms of power usage\n"
- "or idle time, report the rate of @acronym{SMI, system management interrupt}s\n"
- "occurring on the system, or verify the effects of power management tuning.\n"
- "\n"
- "@command{turbostat} reads hardware counters but doesn't write to them, so it\n"
- "won't interfere with the OS or other running processes---including multiple\n"
- "invocations of itself."
- msgstr ""
- #: gnu/packages/linux.scm:6511
- msgid "Read-write access to NTFS file systems"
- msgstr ""
- #: gnu/packages/linux.scm:6513
- msgid ""
- "NTFS-3G provides read-write access to NTFS file systems, which are\n"
- "commonly found on Microsoft Windows. It is implemented as a FUSE file system.\n"
- "The package provides additional NTFS tools."
- msgstr ""
- #: gnu/packages/linux.scm:6561
- msgid "Statically linked @command{ntfsfix} from ntfs-3g"
- msgstr ""
- #: gnu/packages/linux.scm:6563
- msgid ""
- "This package provides a statically linked @command{ntfsfix} taken\n"
- "from the ntfs-3g package. It is meant to be used in initrds."
- msgstr ""
- #: gnu/packages/linux.scm:6612
- msgid "Utilities and libraries for working with RDMA devices"
- msgstr ""
- #: gnu/packages/linux.scm:6614
- msgid ""
- "This package provides userspace components for the InfiniBand\n"
- "subsystem of the Linux kernel. Specifically it contains userspace\n"
- "libraries for the following device nodes:\n"
- "\n"
- "@enumerate\n"
- "@item @file{/dev/infiniband/uverbsX} (@code{libibverbs})\n"
- "@item @file{/dev/infiniband/rdma_cm} (@code{librdmacm})\n"
- "@item @file{/dev/infiniband/umadX} (@code{libibumad})\n"
- "@end enumerate\n"
- "\n"
- "The following service daemons are also provided:\n"
- "@enumerate\n"
- "@item @code{srp_daemon} (for the @code{ib_srp} kernel module)\n"
- "@item @code{iwpmd} (for iWARP kernel providers)\n"
- "@item @code{ibacm} (for InfiniBand communication management assistant)\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/linux.scm:6657
- msgid "Open Fabrics Enterprise Distribution (OFED) Performance Tests"
- msgstr ""
- #: gnu/packages/linux.scm:6658
- msgid ""
- "This is a collection of tests written over uverbs intended for\n"
- "use as a performance micro-benchmark. The tests may be used for hardware or\n"
- "software tuning as well as for functional testing.\n"
- "\n"
- "The collection contains a set of bandwidth and latency benchmark such as:\n"
- "@enumerate\n"
- "@item Send - @code{ib_send_bw} and @code{ib_send_lat}\n"
- "@item RDMA Read - @code{ib_read_bw} and @code{ib_read_lat}\n"
- "@item RDMA Write - @code{ib_write_bw} and @code{ib_wriet_lat}\n"
- "@item RDMA Atomic - @code{ib_atomic_bw} and @code{ib_atomic_lat}\n"
- "@item Native Ethernet (when working with MOFED2) - @code{raw_ethernet_bw}, @code{raw_ethernet_lat}\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/linux.scm:6705
- msgid "Random number generator daemon"
- msgstr ""
- #: gnu/packages/linux.scm:6707
- msgid ""
- "Monitor a hardware random number generator, and supply entropy\n"
- "from that to the system kernel's @file{/dev/random} machinery."
- msgstr ""
- #: gnu/packages/linux.scm:6746
- msgid "CPU frequency and voltage scaling tools for Linux"
- msgstr ""
- #: gnu/packages/linux.scm:6748
- msgid ""
- "cpupower is a set of user-space tools that use the cpufreq feature of the\n"
- "Linux kernel to retrieve and control processor features related to power saving,\n"
- "such as frequency and voltage scaling."
- msgstr ""
- #: gnu/packages/linux.scm:6778
- msgid "Display and update Intel-CPU energy-performance policy"
- msgstr ""
- #: gnu/packages/linux.scm:6780
- msgid ""
- "@command{x86_energy_perf_policy} displays and updates energy-performance\n"
- "policy settings specific to Intel Architecture Processors. Settings are\n"
- "accessed via Model Specific Register (MSR) updates, no matter if the Linux\n"
- "cpufreq sub-system is enabled or not."
- msgstr ""
- #: gnu/packages/linux.scm:6804
- msgid "Entropy source for the Linux random number generator"
- msgstr ""
- #: gnu/packages/linux.scm:6806
- msgid ""
- "haveged generates an unpredictable stream of random numbers for use by\n"
- "Linux's @file{/dev/random} and @file{/dev/urandom} devices. The kernel's\n"
- "standard mechanisms for filling the entropy pool may not be sufficient for\n"
- "systems with high needs or limited user interaction, such as headless servers.\n"
- "\n"
- "@command{haveged} runs as a privileged daemon, harvesting randomness from the\n"
- "indirect effects of hardware events on hidden processor state using the\n"
- "@acronym{HAVEGE, HArdware Volatile Entropy Gathering and Expansion} algorithm.\n"
- "It tunes itself to its environment and provides the same built-in test suite\n"
- "for the output stream as used on certified hardware security devices.\n"
- "\n"
- "The quality of the randomness produced by this algorithm has not been proven.\n"
- "It is recommended to run it together with another entropy source like rngd, and\n"
- "not as a replacement for it."
- msgstr ""
- #: gnu/packages/linux.scm:6925
- msgid "eCryptfs cryptographic file system utilities"
- msgstr ""
- #: gnu/packages/linux.scm:6927
- msgid ""
- "eCryptfs is a POSIX-compliant stacked cryptographic file system for Linux.\n"
- "Each file's cryptographic meta-data is stored inside the file itself, along\n"
- "with the encrypted contents. This allows individual encrypted files to be\n"
- "copied between hosts and still be decrypted with the proper key. eCryptfs is a\n"
- "native Linux file system, and has been part of the Linux kernel since version\n"
- "2.6.19. This package contains the userland utilities to manage it."
- msgstr ""
- #: gnu/packages/linux.scm:6958
- msgid "NFSv4 support library for name/ID mapping"
- msgstr ""
- #: gnu/packages/linux.scm:6959
- msgid ""
- "Libnfsidmap is a library holding mulitiple methods of\n"
- "mapping names to ids and visa versa, mainly for NFSv4. It provides an\n"
- "extensible array of mapping functions, currently consisting of two choices:\n"
- "the default @code{nsswitch} and the experimental @code{umich_ldap}."
- msgstr ""
- #: gnu/packages/linux.scm:6993
- msgid "Tools for loading and managing Linux kernel modules"
- msgstr ""
- #: gnu/packages/linux.scm:6995
- msgid ""
- "Tools for loading and managing Linux kernel modules, such as\n"
- "@code{modprobe}, @code{insmod}, @code{lsmod}, and more."
- msgstr ""
- #: gnu/packages/linux.scm:7037
- msgid "Inject x86 @acronym{MCEs, machine-check exceptions} into Linux"
- msgstr ""
- #: gnu/packages/linux.scm:7039
- msgid ""
- "This simple tool injects fake @acronym{MCEs, machine-check exceptions}\n"
- "into a running Linux kernel, to debug or test the kernel's @acronym{EDAC, error\n"
- "detection and correction}-handling code specific to x86 and x86_64 platforms.\n"
- "\n"
- "Real MCEs are internal CPU errors. Handling them correctly can be important to\n"
- "system stability and even prevent physical damage. In contrast, simulated MCEs\n"
- "produced by @command{mce-inject} are purely synthetic: injection happens only at\n"
- "the software level, inside the kernel, and is not visible to the platform\n"
- "hardware or firmware.\n"
- "\n"
- "A convenient feature of @command{mce-inject} is that the input language used to\n"
- "describe MCEs is similar to the format used in Linux panic messages, with a few\n"
- "extensions. In general, you should be able to pipe in any logged MCE panic to\n"
- "simulate that same MCE.\n"
- "\n"
- "The target kernel must have the @code{CONFIG_X86_MCE_INJECT} option enabled and\n"
- "the @code{mce-inject} module loaded if it exists."
- msgstr ""
- #: gnu/packages/linux.scm:7095
- msgid "Machine check monitor for x86 Linux systems"
- msgstr ""
- #: gnu/packages/linux.scm:7097
- msgid ""
- "The mcelog daemon logs memory, I/O, CPU, and other hardware errors on x86\n"
- "systems running the kernel Linux. It can also perform user-defined tasks, such\n"
- "as bringing bad pages off-line, when configurable error thresholds are\n"
- "exceeded."
- msgstr ""
- #: gnu/packages/linux.scm:7132
- msgid "MTD Flash Storage Utilities"
- msgstr ""
- #: gnu/packages/linux.scm:7133
- msgid ""
- "This package provides utilities for testing, partitioning, etc\n"
- "of flash storage."
- msgstr ""
- #: gnu/packages/linux.scm:7164
- msgid "Interface to Linux's seccomp syscall filtering mechanism"
- msgstr ""
- #: gnu/packages/linux.scm:7165
- msgid ""
- "The libseccomp library provides an easy to use, platform\n"
- "independent, interface to the Linux Kernel's syscall filtering mechanism. The\n"
- "libseccomp API is designed to abstract away the underlying BPF based syscall\n"
- "filter language and present a more conventional function-call based filtering\n"
- "interface that should be familiar to, and easily adopted by, application\n"
- "developers."
- msgstr ""
- #: gnu/packages/linux.scm:7206
- msgid "Usage monitor for AMD Radeon graphics"
- msgstr ""
- #: gnu/packages/linux.scm:7207
- msgid ""
- "RadeonTop monitors resource consumption on supported AMD\n"
- "Radeon Graphics Processing Units (GPUs), either in real time as bar graphs on\n"
- "a terminal or saved to a file for further processing. It measures both the\n"
- "activity of the GPU as a whole, which is also accurate during OpenCL\n"
- "computations, as well as separate component statistics that are only meaningful\n"
- "under OpenGL graphics workloads."
- msgstr ""
- #: gnu/packages/linux.scm:7254
- msgid "Tool and library to manipulate EFI variables"
- msgstr ""
- #: gnu/packages/linux.scm:7255
- msgid ""
- "This package provides a library and a command line\n"
- "interface to the variable facility of UEFI boot firmware."
- msgstr ""
- #: gnu/packages/linux.scm:7307
- msgid "Modify the Extensible Firmware Interface (EFI) boot manager"
- msgstr ""
- #: gnu/packages/linux.scm:7309
- msgid ""
- "@code{efibootmgr} is a user-space application to modify the Intel\n"
- "Extensible Firmware Interface (EFI) Boot Manager. This application can\n"
- "create and destroy boot entries, change the boot order, change the next\n"
- "running boot option, and more."
- msgstr ""
- #: gnu/packages/linux.scm:7344
- msgid "Performance monitoring tools for Linux"
- msgstr ""
- #: gnu/packages/linux.scm:7345
- msgid ""
- "The sysstat utilities are a collection of performance\n"
- "monitoring tools for Linux. These include @code{mpstat}, @code{iostat},\n"
- "@code{tapestat}, @code{cifsiostat}, @code{pidstat}, @code{sar}, @code{sadc},\n"
- "@code{sadf} and @code{sa}."
- msgstr ""
- #: gnu/packages/linux.scm:7384
- msgid "Backward-compatibile xbacklight replacement"
- msgstr ""
- #: gnu/packages/linux.scm:7385
- msgid ""
- "acpilight is a backward-compatibile replacement for\n"
- "xbacklight that uses the ACPI interface to set the display brightness. On\n"
- "modern laptops acpilight can control both display and keyboard backlight\n"
- "uniformly on either X11, the console or Wayland."
- msgstr ""
- #: gnu/packages/linux.scm:7424
- msgid "GNU/Linux application to control backlights"
- msgstr ""
- #: gnu/packages/linux.scm:7426
- msgid ""
- "Light is a program to send commands to screen backlight controllers\n"
- "under GNU/Linux. Features include:\n"
- "\n"
- "@itemize\n"
- "@item It does not rely on X.\n"
- "@item Light can automatically figure out the best controller to use, making\n"
- "full use of underlying hardware.\n"
- "@item It is possible to set a minimum brightness value, as some controllers\n"
- "set the screen to be pitch black at a value of 0 (or higher).\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/linux.scm:7472
- msgid "Backlight and LED brightness control"
- msgstr ""
- #: gnu/packages/linux.scm:7474
- msgid ""
- "This program allows you read and control device brightness. Devices\n"
- "include backlight and LEDs. It can also preserve current brightness before\n"
- "applying the operation, such as on lid close.\n"
- "\n"
- "The appropriate permissions must be set on the backlight or LED control\n"
- "interface in sysfs, which can be accomplished with the included udev rules."
- msgstr ""
- #: gnu/packages/linux.scm:7597
- msgid "Power management tool for Linux"
- msgstr ""
- #: gnu/packages/linux.scm:7598
- msgid ""
- "TLP is a power management tool for Linux. It comes with\n"
- "a default configuration already optimized for battery life. Nevertheless,\n"
- "TLP is customizable to fulfil system requirements. TLP settings are applied\n"
- "every time the power supply source is changed."
- msgstr ""
- #: gnu/packages/linux.scm:7685
- msgid "User interface for TLP written in Python"
- msgstr ""
- #: gnu/packages/linux.scm:7687
- msgid ""
- "The Python scripts in this project generate a GTK-UI to change\n"
- "TLP configuration files easily. It aims to protect users from setting\n"
- "bad configuration and to deliver a basic overview of all the valid\n"
- "configuration values."
- msgstr ""
- #: gnu/packages/linux.scm:7711
- msgid "List hardware information"
- msgstr ""
- #: gnu/packages/linux.scm:7713
- msgid ""
- "@command{lshw} (Hardware Lister) is a small tool to provide\n"
- "detailed information on the hardware configuration of the machine.\n"
- "It can report exact memory configuration, firmware version, mainboard\n"
- "configuration, CPU version and speed, cache configuration, bus speed,\n"
- "and more on DMI-capable x86 or EFI (IA-64) systems and on some PowerPC\n"
- "machines (PowerMac G4 is known to work)."
- msgstr ""
- #: gnu/packages/linux.scm:7736
- msgid "Netlink utility library"
- msgstr ""
- #: gnu/packages/linux.scm:7737
- msgid ""
- "Libmnl is a minimalistic user-space library oriented to\n"
- "Netlink developers. There are a lot of common tasks in parsing, validating,\n"
- "constructing of both the Netlink header and TLVs that are repetitive and easy to\n"
- "get wrong. This library aims to provide simple helpers that allows you to\n"
- "re-use code and to avoid re-inventing the wheel."
- msgstr ""
- #: gnu/packages/linux.scm:7761
- msgid "Netlink programming interface to the Linux nf_tables subsystem"
- msgstr ""
- #: gnu/packages/linux.scm:7762
- msgid ""
- "Libnftnl is a userspace library providing a low-level netlink\n"
- "programming interface to the in-kernel nf_tables subsystem. The library\n"
- "libnftnl has been previously known as libnftables. This library is currently\n"
- "used by nftables."
- msgstr ""
- #: gnu/packages/linux.scm:7822
- msgid "Userspace utility for Linux packet filtering"
- msgstr ""
- #: gnu/packages/linux.scm:7823
- msgid ""
- "nftables is the project that aims to replace the existing\n"
- "{ip,ip6,arp,eb}tables framework. Basically, this project provides a new packet\n"
- "filtering framework, a new userspace utility and also a compatibility layer for\n"
- "{ip,ip6}tables. nftables is built upon the building blocks of the Netfilter\n"
- "infrastructure such as the existing hooks, the connection tracking system, the\n"
- "userspace queueing component and the logging subsystem."
- msgstr ""
- #: gnu/packages/linux.scm:7847
- msgid "Library for kernel connection tracking state table"
- msgstr ""
- #: gnu/packages/linux.scm:7848
- msgid ""
- "libnetfilter_conntrack is a userspace library providing a\n"
- "programming interface (API) to the in-kernel connection tracking state table.\n"
- "The library libnetfilter_conntrack has been previously known as\n"
- "libnfnetlink_conntrack and libctnetlink. This library is currently used by\n"
- "conntrack-tools among many other applications."
- msgstr ""
- #: gnu/packages/linux.scm:7873
- msgid "Library for kernel connection tracking timeout infrastructure"
- msgstr ""
- #: gnu/packages/linux.scm:7874
- msgid ""
- "libnetfilter_cttimeout is the userspace library that\n"
- "provides the programming interface to the fine-grain connection tracking\n"
- "timeout infrastructure. With this library, you can create, update and delete\n"
- "timeout policies that can be attached to traffic flows. This library is used\n"
- "by conntrack-tools."
- msgstr ""
- #: gnu/packages/linux.scm:7899
- msgid "Library for user-space connection tracking helpers"
- msgstr ""
- #: gnu/packages/linux.scm:7900
- msgid ""
- "libnetfilter_cthelper is a userspace library that provides a\n"
- "programming interface to user-space connection tracking helpers.\n"
- "@enumerate\n"
- "@item\n"
- "register new user-space connection tracking helpers\n"
- "@item\n"
- "unregister user-space connection tracking helpers\n"
- "@item\n"
- "list existing registered user-space connection tracking helpers\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/linux.scm:7931
- msgid "Library for kernel netfilter infrastructure and state"
- msgstr ""
- #: gnu/packages/linux.scm:7932
- msgid ""
- "libnetfilter_queue is a userspace library providing an API\n"
- "to packets that have been queued by the kernel packet filter. It is is part\n"
- "of a system that deprecates the old ip_queue/libipq mechanism."
- msgstr ""
- #: gnu/packages/linux.scm:7961
- msgid "Set of tools targeting the conntrack kernel subsystem"
- msgstr ""
- #: gnu/packages/linux.scm:7962
- msgid ""
- "The tool conntrack provides a full featured interface that\n"
- "is intended to replace the old @file{/proc/net/ip_conntrack} interface. Using\n"
- "conntrack, you can view and manage the in-kernel connection tracking state\n"
- "table from userspace. On the other hand, conntrackd covers the specific\n"
- "aspects of stateful firewalls to enable highly available scenarios, and can be\n"
- "used as statistics collector as well.\n"
- "\n"
- "Since 1.2.0, the conntrack-tools includes the @command{nfct} command line\n"
- "utility. This utility only supports the nfnetlink_cttimeout by now. In the\n"
- "long run, we expect that it will replace conntrack by providing a syntax\n"
- "similar to nftables."
- msgstr ""
- #: gnu/packages/linux.scm:7993
- msgid "Library providing interface to extended accounting infrastructure"
- msgstr ""
- #: gnu/packages/linux.scm:7994
- msgid ""
- "libnetfilter_acct is the userspace library providing interface\n"
- "to extended accounting infrastructure.\n"
- "\n"
- "@enumerate\n"
- "@item\n"
- "creating accounting objects\n"
- "@item\n"
- "retrieving accounting objects (and atomically set to zero)\n"
- "@item\n"
- "deleting accounting objects\n"
- "@end enumerate\n"
- "For the nfnetlink_acct subsystem."
- msgstr ""
- #: gnu/packages/linux.scm:8026
- msgid "Command line tool to create/retrieve/delete accounting objects"
- msgstr ""
- #: gnu/packages/linux.scm:8027
- msgid ""
- "nfacct is the command line tool to create/retrieve/delete\n"
- "accounting objects\n"
- "@enumerate\n"
- "@item\n"
- "listing the objects of the nfacct table in plain text/XML\n"
- "@item\n"
- "atomically get and reset objects of the nfacct table\n"
- "@item\n"
- "adding new objects to the nfacct table\n"
- "@item\n"
- "deleting objects from the nfacct table\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/linux.scm:8059
- msgid "Library providing interface to packets logged by netfilter"
- msgstr ""
- #: gnu/packages/linux.scm:8060
- msgid ""
- "libnetfilter_log is a userspace library providing interface to\n"
- "packets that have been logged by the kernel packet filter. It is is part of a\n"
- "system that deprecates the old syslog/dmesg based packet logging. This library\n"
- "has been previously known as libnfnetlink_log.\n"
- "\n"
- "@enumerate\n"
- "@item\n"
- "receiving to-be-logged packets from the kernel nfnetlink_log subsystem\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/linux.scm:8137
- msgid "Logging daemon for netfilter and iptables"
- msgstr ""
- #: gnu/packages/linux.scm:8138
- msgid ""
- "ulogd is a userspace logging daemon for netfilter/iptables\n"
- "related logging. This includes per-packet logging of security violations,\n"
- "per-packet logging for accounting, per-flow logging and flexible user-defined\n"
- "accounting.\n"
- "\n"
- "@enumerate\n"
- "@item\n"
- "Packet and flow-based traffic accounting\n"
- "@item\n"
- "Flexible user-defined traffic accounting via nfacct infrastructure\n"
- "@item\n"
- "SQL database back-end support: SQLite3, PostgreSQL, MySQL\n"
- "@item\n"
- "Text-based output formats: CSV, XML, Netfilter's LOG, Netfilter's conntrack\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/linux.scm:8263
- msgid "Unprivileged chroot, bind mount, and binfmt_misc"
- msgstr ""
- #: gnu/packages/linux.scm:8265
- msgid ""
- "PRoot is a user-space implementation of @code{chroot}, @code{mount --bind},\n"
- "and @code{binfmt_misc}. This means that users don't need any privileges or\n"
- "setup to do things like using an arbitrary directory as the new root\n"
- "file system, making files accessible somewhere else in the file system\n"
- "hierarchy, or executing programs built for another CPU architecture\n"
- "transparently through QEMU user-mode. Also, developers can use PRoot as a\n"
- "generic process instrumentation engine thanks to its extension mechanism.\n"
- "Technically PRoot relies on @code{ptrace}, an unprivileged system-call\n"
- "available in the kernel Linux."
- msgstr ""
- #: gnu/packages/linux.scm:8281
- msgid "Unprivileged chroot, bind mount, and binfmt_misc (statically linked)"
- msgstr ""
- #: gnu/packages/linux.scm:8325
- msgid "Dump x86 CPUID processor information"
- msgstr ""
- #: gnu/packages/linux.scm:8326
- msgid ""
- "cpuid dumps detailed information about the CPU(s) gathered\n"
- "from the CPUID instruction, and also determines the exact model of CPU(s). It\n"
- "supports Intel, AMD, and VIA CPUs, as well as older Transmeta, Cyrix, UMC,\n"
- "NexGen, Rise, and SiS CPUs."
- msgstr ""
- #: gnu/packages/linux.scm:8352
- msgid "Use a FUSE file system to access data over MTP"
- msgstr ""
- #: gnu/packages/linux.scm:8353
- msgid ""
- "jmtpfs uses FUSE (file system in userspace) to provide access\n"
- "to data over the Media Transfer Protocol (MTP). Unprivileged users can mount\n"
- "the MTP device as a file system."
- msgstr ""
- #: gnu/packages/linux.scm:8378
- msgid "Utility to show process environment"
- msgstr ""
- #: gnu/packages/linux.scm:8380
- msgid ""
- "Procenv is a command-line tool that displays as much detail about\n"
- "itself and its environment as possible. It can be used as a test\n"
- "tool, to understand the type of environment a process runs in, and for\n"
- "comparing system environments."
- msgstr ""
- #: gnu/packages/linux.scm:8407
- msgid "Open Fabric Interfaces"
- msgstr ""
- #: gnu/packages/linux.scm:8409
- msgid ""
- "OpenFabrics Interfaces (OFI) is a framework focused on exporting fabric\n"
- "communication services to applications. OFI is best described as a collection\n"
- "of libraries and applications used to export fabric services. The key\n"
- "components of OFI are: application interfaces, provider libraries, kernel\n"
- "services, daemons, and test applications.\n"
- "\n"
- "Libfabric is a core component of OFI. It is the library that defines and\n"
- "exports the user-space API of OFI, and is typically the only software that\n"
- "applications deal with directly. It works in conjunction with provider\n"
- "libraries, which are often integrated directly into libfabric."
- msgstr ""
- #: gnu/packages/linux.scm:8469
- msgid "Intel Performance Scaled Messaging (PSM) Libraries"
- msgstr ""
- #: gnu/packages/linux.scm:8471
- msgid ""
- "The PSM Messaging API, or PSM API, is Intel's low-level user-level\n"
- "communications interface for the True Scale family of products. PSM users are\n"
- "enabled with mechanisms necessary to implement higher level communications\n"
- "interfaces in parallel environments."
- msgstr ""
- #: gnu/packages/linux.scm:8512
- msgid "Take screenshots of one or more Linux text consoles"
- msgstr ""
- #: gnu/packages/linux.scm:8514
- msgid ""
- "snapscreenshot saves a screenshot of one or more Linux text consoles as a\n"
- "Targa (@dfn{.tga}) image. It can be used by anyone with read access to the\n"
- "relevant @file{/dev/vcs*} file(s)."
- msgstr ""
- #: gnu/packages/linux.scm:8566
- msgid "Take a screenshot of the contents of the Linux framebuffer"
- msgstr ""
- #: gnu/packages/linux.scm:8568
- msgid ""
- "fbcat saves the contents of the Linux framebuffer (@file{/dev/fb*}), or\n"
- "a dump thereof. It supports a wide range of drivers and pixel formats.\n"
- "\n"
- "@command{fbcat} can take screenshots of virtually any application that can be\n"
- "made to write its output to the framebuffer, including (but not limited to)\n"
- "text-mode or graphical applications that don't use a display server.\n"
- "\n"
- "Also included is @command{fbgrab}, a wrapper around @command{fbcat} that\n"
- "emulates the behaviour of Gunnar Monell's older fbgrab utility."
- msgstr ""
- #: gnu/packages/linux.scm:8605
- msgid "Linux framebuffer screenshot/conversion utility"
- msgstr ""
- #: gnu/packages/linux.scm:8606
- msgid ""
- "FBGrab is a framebuffer screenshot program that captures the\n"
- "Linux framebuffer and converts it to a PNG image. It can also convert a\n"
- "framebuffer dump file (copy) to a PNG image."
- msgstr ""
- #: gnu/packages/linux.scm:8634
- msgid "Control groups management tools"
- msgstr ""
- #: gnu/packages/linux.scm:8635
- msgid ""
- "Control groups is Linux kernel method for process resource\n"
- "restriction, permission handling and more. This package provides userspace\n"
- "interface to this kernel feature."
- msgstr ""
- #: gnu/packages/linux.scm:8668
- msgid "Control fan speed on Macbooks"
- msgstr ""
- #: gnu/packages/linux.scm:8670
- msgid ""
- "mbpfan is a fan control daemon for Apple Macbooks. It uses input from\n"
- "the @code{coretemp} module and sets the fan speed using the @code{applesmc}\n"
- "module. It can be executed as a daemon or in the foreground with root\n"
- "privileges."
- msgstr ""
- #: gnu/packages/linux.scm:8710
- msgid "Intel Performance Scaled Messaging 2 (PSM2) library"
- msgstr ""
- #: gnu/packages/linux.scm:8712
- msgid ""
- "This package is low-level user-level Intel's communications interface.\n"
- "The PSM2 API is a high-performance vendor-specific protocol that provides a\n"
- "low-level communications interface for the Intel Omni-Path family of\n"
- "high-speed networking devices."
- msgstr ""
- #: gnu/packages/linux.scm:8753
- msgid "Performance event monitoring library"
- msgstr ""
- #: gnu/packages/linux.scm:8755
- msgid ""
- "This package provides a library called libpfm4, which is used to develop\n"
- "monitoring tools exploiting the performance monitoring events such as those\n"
- "provided by the Performance Monitoring Unit (PMU) of modern processors.\n"
- "\n"
- "Libpfm4 helps convert from an event name, expressed as a string, to the event\n"
- "encoding that is either the raw event as documented by the hardware vendor or\n"
- "the OS-specific encoding. In the latter case, the library is able to prepare\n"
- "the OS-specific data structures needed by the kernel to setup the event.\n"
- "\n"
- "libpfm4 provides support for the @code{perf_events} interface, which was\n"
- "introduced in Linux 2.6.31."
- msgstr ""
- #: gnu/packages/linux.scm:8783
- msgid "Low-level netfilter netlink communication library"
- msgstr ""
- #: gnu/packages/linux.scm:8785
- msgid ""
- "@code{libnfnetlink} is the low-level library for netfilter related\n"
- "kernel/userspace communication. It provides a generic messaging\n"
- "infrastructure for in-kernel netfilter subsystems (such as nfnetlink_log,\n"
- "nfnetlink_queue, nfnetlink_conntrack) and their respective users and/or\n"
- "management tools in userspace."
- msgstr ""
- #: gnu/packages/linux.scm:8811
- msgid "Simple netlink library for Go"
- msgstr ""
- #: gnu/packages/linux.scm:8812
- msgid ""
- "The netlink package provides a simple netlink library for\n"
- "Go. Netlink is the interface a user-space program in Linux uses to\n"
- "communicate with the kernel. It can be used to add and remove interfaces, set\n"
- "IP addresses and routes, and configure IPsec."
- msgstr ""
- #: gnu/packages/linux.scm:8851
- msgid "Simple .INI parser library for C"
- msgstr ""
- #: gnu/packages/linux.scm:8852
- msgid ""
- "The inih (INI Not Invented Here) library is a simple .INI file\n"
- "parser written in C. It's only a couple of pages of code, and it was designed to\n"
- "be small and simple, so it's good for embedded systems. It's also more or less\n"
- "compatible with Python's ConfigParser style of .INI files, including RFC\n"
- "822-style multi-line syntax and name: value entries."
- msgstr ""
- #: gnu/packages/linux.scm:8902
- msgid "XFS file system tools"
- msgstr ""
- #: gnu/packages/linux.scm:8903
- msgid ""
- "This package provides commands to create and check XFS\n"
- "file systems."
- msgstr ""
- #: gnu/packages/linux.scm:8949
- msgid "Statically linked XFS file system tools"
- msgstr ""
- #: gnu/packages/linux.scm:8971
- msgid "Statically linked @command{xfs_repair} from xfsprogs"
- msgstr ""
- #: gnu/packages/linux.scm:8973
- msgid ""
- "This package provides a statically linked @command{xfs_repair} taken\n"
- "from the xfsprogs package. It is meant to be used in initrds."
- msgstr ""
- #: gnu/packages/linux.scm:8993
- msgid "Generate ext2 file system as a normal user"
- msgstr ""
- #: gnu/packages/linux.scm:8994
- msgid ""
- "This package provides a program to generate an ext2\n"
- "file system as a normal (non-root) user. It does not require you to mount\n"
- "the image file to copy files on it, nor does it require that you become\n"
- "the superuser to make device nodes."
- msgstr ""
- #: gnu/packages/linux.scm:9078
- msgid "Run commands in an environment with fake root privileges"
- msgstr ""
- #: gnu/packages/linux.scm:9080
- msgid ""
- "@command{fakeroot} runs a command in an environment where it appears to\n"
- "have root privileges for file manipulation. This is useful for allowing users\n"
- "to create archives (@file{tar}, @file{ar}, @file{deb}, etc.) with files in\n"
- "them with root permissions and/or ownership.\n"
- "\n"
- "Without fakeroot, one would have to have root privileges to create the\n"
- "constituent files of the archives with the correct permissions and ownership,\n"
- "and then pack them up, or one would have to construct the archives directly,\n"
- "without using the archiver."
- msgstr ""
- #: gnu/packages/linux.scm:9118
- msgid "Emulate @code{chroot} by overriding file system calls"
- msgstr ""
- #: gnu/packages/linux.scm:9120
- msgid ""
- "@command{fakechroot} runs a command in an environment were is additional\n"
- "possibility to use @code{chroot} command without root privileges. This is\n"
- "useful for allowing users to create own chrooted environment with possibility\n"
- "to install another packages without need for root privileges.\n"
- "\n"
- "It works by providing @file{libfakechroot.so}, a shared library meant to be\n"
- "set as @code{LD_PRELOAD} to override the C library file system functions."
- msgstr ""
- #: gnu/packages/linux.scm:9165
- msgid "Dispatch input peripherals events to a device file"
- msgstr ""
- #: gnu/packages/linux.scm:9166
- msgid ""
- "inputattach dispatches input events from several device\n"
- "types and interfaces and translates so that the X server can use them."
- msgstr ""
- #: gnu/packages/linux.scm:9218
- msgid "Server and user space API to deal with multimedia pipelines"
- msgstr ""
- #: gnu/packages/linux.scm:9220
- msgid ""
- "PipeWire is a project that aims to greatly improve handling of audio and\n"
- "video under Linux. It aims to support the usecases currently handled by both\n"
- "PulseAudio and Jack and at the same time provide same level of powerful handling\n"
- "of Video input and output. It also introduces a security model that makes\n"
- "interacting with audio and video devices from containerized applications easy,\n"
- "with supporting Flatpak applications being the primary goal. Alongside Wayland\n"
- "and Flatpak we expect PipeWire to provide a core building block for the future\n"
- "of Linux application development."
- msgstr ""
- #: gnu/packages/linux.scm:9253
- msgid "Session / policy manager implementation for PipeWire"
- msgstr ""
- #: gnu/packages/linux.scm:9254
- msgid ""
- "WirePlumber is a modular session / policy manager for\n"
- "PipeWire and a GObject-based high-level library that wraps PipeWire's API,\n"
- "providing convenience for writing the daemon's modules as well as external\n"
- "tools for managing PipeWire."
- msgstr ""
- #: gnu/packages/linux.scm:9283
- msgid "Embedded Linux Library"
- msgstr ""
- #: gnu/packages/linux.scm:9284
- msgid ""
- "The Embedded Linux* Library (ELL) provides core, low-level\n"
- "functionality for system daemons. It typically has no dependencies other than\n"
- "the Linux kernel, C standard library, and libdl (for dynamic linking). While\n"
- "ELL is designed to be efficient and compact enough for use on embedded Linux\n"
- "platforms, it is not limited to resource-constrained systems."
- msgstr ""
- #: gnu/packages/linux.scm:9312
- msgid "Tools for booting directly into different kernels"
- msgstr ""
- #: gnu/packages/linux.scm:9313
- msgid ""
- "This package provides the @code{kexec} program and ancillary\n"
- "utilities. Using @code{kexec}, it is possible to boot directly into a new\n"
- "kernel from the context of an already-running kernel, bypassing the normal\n"
- "system boot process."
- msgstr ""
- #: gnu/packages/linux.scm:9346
- msgid "CacheFiles userspace management daemon"
- msgstr ""
- #: gnu/packages/linux.scm:9347
- msgid ""
- "@code{cachefilesd} is a userspace daemon that manages the\n"
- "cache data store that is used by network file systems such as @code{AFS} and\n"
- "@code{NFS} to cache data locally on disk. The content of the cache is\n"
- "persistent over reboots."
- msgstr ""
- #: gnu/packages/linux.scm:9387
- msgid "BPF CO-RE (Compile Once – Run Everywhere)"
- msgstr ""
- #: gnu/packages/linux.scm:9389
- msgid ""
- "Libbpf supports building BPF CO-RE-enabled applications, which, in\n"
- "contrast to BCC, do not require the Clang/LLVM runtime or linux kernel\n"
- "headers."
- msgstr ""
- #: gnu/packages/linux.scm:9465
- msgid "Tools for BPF on Linux"
- msgstr ""
- #: gnu/packages/linux.scm:9467
- msgid ""
- "BCC is a toolkit for creating efficient kernel tracing and manipulation\n"
- "programs, and includes several useful tools and examples. It makes use of\n"
- "extended BPF (Berkeley Packet Filters), formally known as eBPF, a new feature\n"
- "that was first added to Linux 3.15. Much of what BCC uses requires Linux 4.1\n"
- "and above."
- msgstr ""
- #: gnu/packages/linux.scm:9501
- msgid "High-level tracing language for Linux eBPF"
- msgstr ""
- #: gnu/packages/linux.scm:9503
- msgid ""
- "bpftrace is a high-level tracing language for Linux enhanced Berkeley\n"
- "Packet Filter (eBPF) available in recent Linux kernels (4.x). bpftrace uses\n"
- "LLVM as a backend to compile scripts to BPF-bytecode and makes use of BCC for\n"
- "interacting with the Linux BPF system, as well as existing Linux tracing\n"
- "capabilities: kernel dynamic tracing (kprobes), user-level dynamic\n"
- "tracing (uprobes), and tracepoints. The bpftrace language is inspired by awk\n"
- "and C, and predecessor tracers such as DTrace and SystemTap. bpftrace was\n"
- "created by Alastair Robertson."
- msgstr ""
- #: gnu/packages/linux.scm:9534
- msgid "Low-latency Raspberry Pi UART driver"
- msgstr ""
- #: gnu/packages/linux.scm:9535
- msgid ""
- "This package provides a Linux kernel module that will\n"
- "provide a serial device @code{/dev/ttyebus} with almost no latency upon\n"
- "receiving. It is dedicated to the PL011 UART of the Raspberry Pi."
- msgstr ""
- #: gnu/packages/linux.scm:9560
- msgid "Administration tool for IP sets"
- msgstr ""
- #: gnu/packages/linux.scm:9561
- msgid ""
- "IP sets are a framework inside the Linux 2.4.x and 2.6.x kernel which\n"
- "can be administered by the ipset utility. Depending on the type,\n"
- "currently an IP set may store IP addresses, (TCP/UDP) port numbers or\n"
- "IP addresses with MAC addresses in a way which ensures lightning speed\n"
- "when matching an entry against a set.\n"
- "\n"
- "If you want to\n"
- "@itemize @bullet\n"
- "@item store multiple IP addresses or port numbers and match against the entire\n"
- "collection using a single iptables rule.\n"
- "@item dynamically update iptables rules against IP addresses or ports without\n"
- "performance penalty.\n"
- "@item express complex IP address and ports based rulesets with a single\n"
- "iptables rule and benefit from the speed of IP sets.\n"
- "@end itemize\n"
- "\n"
- "then IP sets may be the proper tool for you."
- msgstr ""
- #: gnu/packages/linux.scm:9607
- msgid "Interface to the Linux kernel @code{io_uring} interface"
- msgstr ""
- #: gnu/packages/linux.scm:9608
- msgid ""
- "This is the io_uring library, liburing. liburing provides\n"
- "helpers to setup and teardown io_uring instances, and also a simplified\n"
- "interface for applications that don't need (or want) to deal with the full\n"
- "kernel side implementation."
- msgstr ""
- #: gnu/packages/linux.scm:9634
- msgid "User-space tools for the EROFS file system"
- msgstr ""
- #: gnu/packages/linux.scm:9636
- msgid ""
- "@acronym{EROFS, The Enhanced Read-Only File System} is a compressed,\n"
- "read-only file system optimized for resource-scarce devices. This package\n"
- "provides user-space tools for creating EROFS file systems."
- msgstr ""
- #: gnu/packages/linux.scm:9688
- msgid "Platform Reliability, Availability, and Serviceability tools"
- msgstr ""
- #: gnu/packages/linux.scm:9690
- msgid ""
- "The @code{rasdaemon} daemon monitors platform @acronym{RAS, Reliability\n"
- "Availability and Serviceability} reports from Linux kernel trace events.\n"
- "These trace events are logged in @file{/sys/kernel/debug/tracing} and reported\n"
- "through standard log mechanisms like syslog."
- msgstr ""
- #: gnu/packages/linux.scm:9722
- msgid "Interact with the Linux GPIO character device"
- msgstr ""
- #: gnu/packages/linux.scm:9724
- msgid ""
- "This package provides a C library with C++/Python bindings and\n"
- "command-line tools for interacting with GPIO devices that avoids the usage of\n"
- "older system-wide @file{/sys} interface."
- msgstr ""
- #: gnu/packages/linux.scm:9765
- msgid "Show output of @command{ldd} as a tree"
- msgstr ""
- #: gnu/packages/linux.scm:9767
- msgid ""
- "This tool turns @command{ldd} into a tree and explains how shared\n"
- "libraries are found or why they cannot be located."
- msgstr ""
- #: gnu/packages/linux.scm:9800
- msgid "User-space EVDI library"
- msgstr ""
- #: gnu/packages/linux.scm:9802
- msgid ""
- "Libevdi is a library that gives applications easy access to\n"
- "@acronym{EVDI, Extensible Virtual Display Interface} devices on\n"
- "various operating systems."
- msgstr ""
- #: gnu/packages/linux.scm:9838
- msgid "Multitouch gesture recognizer"
- msgstr ""
- #: gnu/packages/linux.scm:9840
- msgid ""
- "Touchégg is an application that runs in the background and transform the\n"
- "gestures you make on your touchpad or touchscreen into visible actions in your\n"
- "desktop."
- msgstr ""
- #: gnu/packages/linux.scm:9892
- msgid "Kernel evdev device information and monitor"
- msgstr ""
- #: gnu/packages/linux.scm:9894
- msgid ""
- "@code{evtest} is a tool to print @code{evdev} kernel events. It reads\n"
- "directly from the kernel device and prints a device description and the events\n"
- "with the value and the symbolic name."
- msgstr ""
- #: gnu/packages/linux.scm:9917
- msgid "Linux Kernel module exposing features of ThinkPad hardware"
- msgstr ""
- #: gnu/packages/linux.scm:9919
- msgid ""
- "This package provides a Linux Kernel module that controls\n"
- "battery charging of specific ThinkPad laptops. It also includes an improved\n"
- "version of the HDAPS driver. The underlying hardware interfaces are\n"
- "@acronym{SMAPI, System Management Application Program Interface} and direct\n"
- "access to the embedded controller."
- msgstr ""
- #: gnu/packages/linux.scm:9972
- msgid "Keep track of Linux modules that have been probed"
- msgstr ""
- #: gnu/packages/linux.scm:9974
- msgid ""
- "Modprobed-db is a useful utility for users wishing to build a minimal\n"
- "kernel via a @code{make localmodconfig}. In a nutshell, this @command{make}\n"
- "target creates a config based on the current config and a list of modules you\n"
- "define (that @command{modprobed-db} keeps for you). It then disables any\n"
- "module option that is not needed thus not building extraneous modules. This\n"
- "results in a system-specific, streamlined kernel package and footprint as well\n"
- "as reduced compilation times.\n"
- "\n"
- "Modprobed-db simply logs every module ever probed on the target system to a\n"
- "text-based database (@file{$XDG_CONFIG_HOME/modprobed-db}), which can be read\n"
- "directly by @code{make localmodconfig} as described above."
- msgstr ""
- #: gnu/packages/linux.scm:10003
- msgid "Tool for checking the security hardening options of the Linux kernel"
- msgstr ""
- #: gnu/packages/linux.scm:10005
- msgid ""
- "@code{kconfig-hardened-check} is a tool for checking the security\n"
- "hardening options of the Linux kernel. Provided preferences are based on\n"
- "suggestions from various sources, including:\n"
- "\n"
- "@itemize\n"
- "@item KSPP recommended settings\n"
- "@item CLIP OS kernel configuration\n"
- "@item Last public grsecurity patch (options which they disable)\n"
- "@item SECURITY_LOCKDOWN_LSM patchset\n"
- "@item Direct feedback from the Linux kernel maintainers\n"
- "@end itemize\n"
- "\n"
- "This tool supports checking Kconfig options and kernel cmdline parameters."
- msgstr ""
- #: gnu/packages/linux.scm:10037
- msgid "Memory error detection and correction userspace helpers"
- msgstr ""
- #: gnu/packages/linux.scm:10038
- msgid ""
- "This package provides userspace helpers for memory\n"
- "error detection and correction (EDAC)."
- msgstr ""
- #: gnu/packages/linux.scm:10132
- msgid "CPU vulnerability / mitigation checker"
- msgstr ""
- #: gnu/packages/linux.scm:10134
- msgid ""
- "This package provides a shell script to assess your system's resilience\n"
- "against the several transient execution CVEs that were published since early\n"
- "2018, and gives guidance as to how to mitigate them."
- msgstr ""
- #: gnu/packages/lout.scm:100
- msgid "Document layout system"
- msgstr ""
- #: gnu/packages/lout.scm:102
- msgid ""
- "The Lout document formatting system reads a high-level description of\n"
- "a document similar in style to LaTeX and produces a PostScript or plain text\n"
- "output file.\n"
- "\n"
- "Lout offers an unprecedented range of advanced features, including optimal\n"
- "paragraph and page breaking, automatic hyphenation, PostScript EPS file\n"
- "inclusion and generation, equation formatting, tables, diagrams, rotation and\n"
- "scaling, sorted indexes, bibliographic databases, running headers and\n"
- "odd-even pages, automatic cross referencing, multilingual documents including\n"
- "hyphenation (most European languages are supported), formatting of computer\n"
- "programs, and much more, all ready to use. Furthermore, Lout is easily\n"
- "extended with definitions which are very much easier to write than troff of\n"
- "TeX macros because Lout is a high-level, purely functional language, the\n"
- "outcome of an eight-year research project that went back to the\n"
- "beginning."
- msgstr ""
- #: gnu/packages/messaging.scm:191
- msgid "Program to download and decrypt @code{aesgcm://} URLs"
- msgstr ""
- #: gnu/packages/messaging.scm:192
- msgid ""
- "OMEMO-wget is a tool to handle cryptographic URLs, generated\n"
- "by @acronym{OMEMO, OMEMO Multi-End Message and Object Encryption}, during\n"
- "XMPP-based sessions."
- msgstr ""
- #: gnu/packages/messaging.scm:249
- msgid "GLib Ncurses Toolkit"
- msgstr ""
- #: gnu/packages/messaging.scm:250
- msgid ""
- "GNT is an ncurses toolkit for creating text-mode graphical\n"
- "user interfaces in a fast and easy way. It is based on GLib and ncurses."
- msgstr ""
- #: gnu/packages/messaging.scm:300
- msgid "Library for handling the protocol of Gadu-Gadu"
- msgstr ""
- #: gnu/packages/messaging.scm:301
- msgid ""
- "LibGadu is library for handling Gadu-Gadu instant messenger\n"
- "protocol. The library is written in C and aims to be operating system and\n"
- "environment independent."
- msgstr ""
- #: gnu/packages/messaging.scm:335
- msgid "SILC ToolKit"
- msgstr ""
- #: gnu/packages/messaging.scm:336
- msgid ""
- "SILC (Secure Internet Live Conferencing) is a modern and secure\n"
- "conferencing protocol. It provides all the common conferencing services like\n"
- "private messages, instant messages, channels and groups, and video and audio\n"
- "conferencing."
- msgstr ""
- #: gnu/packages/messaging.scm:380
- msgid "XMPP client and server library"
- msgstr ""
- #: gnu/packages/messaging.scm:382
- msgid ""
- "QXmpp is a XMPP client and server library written in C++ and uses the Qt\n"
- "framework. It builds XMPP clients complying with the XMPP Compliance Suites\n"
- "2021 for IM and Advanced Mobile."
- msgstr ""
- #: gnu/packages/messaging.scm:408
- msgid "Library for Lotus Instant Messaging"
- msgstr ""
- #: gnu/packages/messaging.scm:409
- msgid ""
- "Meanwhile is a library for connecting to a LIM (Lotus Instant\n"
- "Messaging, formerly Lotus Sametime, formerly VPBuddy) community. It uses a\n"
- "protocol based in part off of the IMPP draft(*1), and in part off of traces of\n"
- "TCP sessions from existing clients."
- msgstr ""
- #: gnu/packages/messaging.scm:452
- msgid "Console Jabber/XMPP Client"
- msgstr ""
- #: gnu/packages/messaging.scm:453
- msgid ""
- "Poezio is a free console XMPP client (the protocol on which\n"
- "the Jabber IM network is built).\n"
- "Its goal is to let you connect very easily (no account creation needed) to the\n"
- "network and join various chatrooms, immediately. It tries to look like the\n"
- "most famous IRC clients (weechat, irssi, etc). Many commands are identical and\n"
- "you won't be lost if you already know these clients. Configuration can be\n"
- "made in a configuration file or directly from the client.\n"
- "You'll find the light, fast, geeky and anonymous spirit of IRC while using a\n"
- "powerful, standard and open protocol."
- msgstr ""
- #: gnu/packages/messaging.scm:485
- msgid "Off-the-Record (OTR) Messaging Library and Toolkit"
- msgstr ""
- #: gnu/packages/messaging.scm:486
- msgid ""
- "OTR allows you to have private conversations over instant\n"
- "messaging by providing: (1) Encryption: No one else can read your instant\n"
- "messages. (2) Authentication: You are assured the correspondent is who you\n"
- "think it is. (3) Deniability: The messages you send do not have digital\n"
- "signatures that are checkable by a third party. Anyone can forge messages\n"
- "after a conversation to make them look like they came from you. However,\n"
- "during a conversation, your correspondent is assured the messages he sees are\n"
- "authentic and unmodified. (4) Perfect forward secrecy: If you lose control of\n"
- "your private keys, no previous conversation is compromised."
- msgstr ""
- #: gnu/packages/messaging.scm:524
- msgid "Implementation of a ratcheting forward secrecy protocol"
- msgstr ""
- #: gnu/packages/messaging.scm:525
- msgid ""
- "libsignal-protocol-c is an implementation of a ratcheting\n"
- "forward secrecy protocol that works in synchronous and asynchronous\n"
- "messaging environments. It can be used with messaging software to provide\n"
- "end-to-end encryption."
- msgstr ""
- #: gnu/packages/messaging.scm:562
- msgid "Client library for libsignal-protocol-c"
- msgstr ""
- #: gnu/packages/messaging.scm:563
- msgid ""
- "This is a client library for @code{libsignal-protocol-c}.\n"
- "It implements the necessary interfaces using @code{libgcrypt} and\n"
- "@code{sqlite}."
- msgstr ""
- #: gnu/packages/messaging.scm:594
- msgid "OMEMO C library"
- msgstr ""
- #: gnu/packages/messaging.scm:595
- msgid ""
- "This library implements @acronym{OMEMO, OMEMO Multi-End\n"
- "Message and Object Encryption} of XMPP (XEP-0384) in C."
- msgstr ""
- #: gnu/packages/messaging.scm:634
- msgid "IRC to instant messaging gateway"
- msgstr ""
- #: gnu/packages/messaging.scm:635
- msgid ""
- "BitlBee brings IM (instant messaging) to IRC clients, for\n"
- "people who have an IRC client running all the time and don't want to run an\n"
- "additional IM client. BitlBee currently supports XMPP/Jabber (including\n"
- "Google Talk), MSN Messenger, Yahoo! Messenger, AIM and ICQ, and the Twitter\n"
- "microblogging network (plus all other Twitter API compatible services like\n"
- "identi.ca and status.net)."
- msgstr ""
- #: gnu/packages/messaging.scm:649
- msgid "IRC to instant messaging gateway (using Pidgin's libpurple)"
- msgstr ""
- #: gnu/packages/messaging.scm:719
- msgid "Discord plugin for Bitlbee"
- msgstr ""
- #: gnu/packages/messaging.scm:720
- msgid ""
- "Bitlbee-discord is a plugin for Bitlbee which provides\n"
- "access to servers running the Discord protocol."
- msgstr ""
- #: gnu/packages/messaging.scm:764
- msgid "Purple plug-in to access Mattermost instant messaging"
- msgstr ""
- #: gnu/packages/messaging.scm:766
- msgid ""
- "Purple-Mattermost is a plug-in for Purple, the instant messaging library\n"
- "used by Pidgin and Bitlbee, among others, to access\n"
- "@uref{https://mattermost.com/, Mattermost} servers."
- msgstr ""
- #: gnu/packages/messaging.scm:822
- msgid "Graphical IRC client"
- msgstr ""
- #: gnu/packages/messaging.scm:824
- msgid ""
- "HexChat lets you connect to multiple IRC networks at once. The main\n"
- "window shows the list of currently connected networks and their channels, the\n"
- "current conversation and the list of users. It uses colors to differentiate\n"
- "between users and to highlight messages. It checks spelling using available\n"
- "dictionaries. HexChat can be extended with multiple addons."
- msgstr ""
- #: gnu/packages/messaging.scm:887
- msgid "Lightweight Internet Relay Chat server for small networks"
- msgstr ""
- #: gnu/packages/messaging.scm:889
- msgid ""
- "ngIRCd is a lightweight @dfn{Internet Relay Chat} (IRC) server for small\n"
- "or private networks. It is easy to configure, can cope with dynamic IP\n"
- "addresses, and supports IPv6, SSL-protected connections, as well as PAM for\n"
- "authentication."
- msgstr ""
- #: gnu/packages/messaging.scm:993
- msgid "Graphical multi-protocol instant messaging client"
- msgstr ""
- #: gnu/packages/messaging.scm:994
- msgid ""
- "Pidgin is a modular instant messaging client that supports\n"
- "many popular chat protocols."
- msgstr ""
- #: gnu/packages/messaging.scm:1033
- msgid "Off-the-Record Messaging plugin for Pidgin"
- msgstr ""
- #: gnu/packages/messaging.scm:1034
- msgid ""
- "Pidgin-OTR is a plugin that adds support for OTR to the Pidgin\n"
- "instant messaging client. OTR (Off-the-Record) Messaging allows you to have\n"
- "private conversations over instant messaging by providing: (1) Encryption: No\n"
- "one else can read your instant messages. (2) Authentication: You are assured\n"
- "the correspondent is who you think it is. (3) Deniability: The messages you\n"
- "send do not have digital signatures that are checkable by a third party. Anyone\n"
- "can forge messages after a conversation to make them look like they came from\n"
- "you. However, during a conversation, your correspondent is assured the messages\n"
- "he sees are authentic and unmodified. (4) Perfect forward secrecy: If you lose\n"
- "control of your private keys, no previous conversation is compromised."
- msgstr ""
- #: gnu/packages/messaging.scm:1087
- msgid "IRC network bouncer"
- msgstr ""
- #: gnu/packages/messaging.scm:1088
- msgid ""
- "ZNC is an @dfn{IRC network bouncer} or @dfn{BNC}. It can\n"
- "detach the client from the actual IRC server, and also from selected channels.\n"
- "Multiple clients from different locations can connect to a single ZNC account\n"
- "simultaneously and therefore appear under the same nickname on IRC."
- msgstr ""
- #: gnu/packages/messaging.scm:1116
- msgid "Non-blocking XMPP Module"
- msgstr ""
- #: gnu/packages/messaging.scm:1117
- msgid ""
- "Python-nbxmpp is a Python library that provides a way for\n"
- "Python applications to use the XMPP network. This library was initially a fork\n"
- "of xmpppy."
- msgstr ""
- #: gnu/packages/messaging.scm:1245
- msgid "Fully-featured XMPP client"
- msgstr ""
- #: gnu/packages/messaging.scm:1246
- msgid ""
- "Gajim aims to be an easy to use and fully-featured XMPP chat\n"
- "client. It is extensible via plugins, supports end-to-end encryption (OMEMO\n"
- "and OpenPGP) and available in 29 languages."
- msgstr ""
- #: gnu/packages/messaging.scm:1280
- msgid "Gajim OMEMO plugin"
- msgstr ""
- #: gnu/packages/messaging.scm:1281
- msgid ""
- "Gajim-OMEMO is a plugin that adds support for the OMEMO\n"
- "Encryption to Gajim. OMEMO is an XMPP Extension Protocol (XEP) for secure\n"
- "multi-client end-to-end encryption."
- msgstr ""
- #: gnu/packages/messaging.scm:1315
- msgid "Gajim OpenPGP plugin"
- msgstr ""
- #: gnu/packages/messaging.scm:1316
- msgid ""
- "Gajim-OpenPGP is a plugin that adds support for the OpenPGP\n"
- "Encryption to Gajim."
- msgstr ""
- #: gnu/packages/messaging.scm:1402
- msgid "Graphical Jabber/XMPP Client using GTK+/Vala"
- msgstr ""
- #: gnu/packages/messaging.scm:1403
- msgid ""
- "Dino is a chat client for the desktop. It focuses on providing\n"
- "a minimal yet reliable Jabber/XMPP experience and having encryption enabled by\n"
- "default."
- msgstr ""
- #: gnu/packages/messaging.scm:1444
- msgid "Qt-based XMPP/Jabber Client"
- msgstr ""
- #: gnu/packages/messaging.scm:1445
- msgid ""
- "Kaidan is a chat client. It uses the open communication\n"
- "protocol XMPP (Jabber). The user interface makes use of Kirigami and QtQuick,\n"
- "while the back-end of Kaidan is entirely written in C++ using Qt and the\n"
- "Qt-based XMPP library QXmpp."
- msgstr ""
- #: gnu/packages/messaging.scm:1552
- msgid "Jabber (XMPP) server"
- msgstr ""
- #: gnu/packages/messaging.scm:1553
- msgid ""
- "Prosody is a modern XMPP communication server. It aims to\n"
- "be easy to set up and configure, and efficient with system resources.\n"
- "Additionally, for developers it aims to be easy to extend and give a flexible\n"
- "system on which to rapidly develop added functionality, or prototype new\n"
- "protocols."
- msgstr ""
- #: gnu/packages/messaging.scm:1587
- msgid "XEP-0363: Allow clients to upload files over HTTP"
- msgstr ""
- #: gnu/packages/messaging.scm:1588
- msgid ""
- "This module implements XEP-0363: it allows clients to\n"
- "upload files over HTTP."
- msgstr ""
- #: gnu/packages/messaging.scm:1619
- msgid "XEP-0198: Reliability and fast reconnects for XMPP"
- msgstr ""
- #: gnu/packages/messaging.scm:1620
- msgid ""
- "This module implements XEP-0198: when supported by both\n"
- "the client and server, it can allow clients to resume a disconnected session,\n"
- "and prevent message loss."
- msgstr ""
- #: gnu/packages/messaging.scm:1647 gnu/packages/messaging.scm:1679
- msgid "Library for the Tox encrypted messenger protocol"
- msgstr ""
- #: gnu/packages/messaging.scm:1649
- msgid "C library implementation of the Tox encrypted messenger protocol."
- msgstr ""
- #: gnu/packages/messaging.scm:1681
- msgid ""
- "Official fork of the C library implementation of the Tox encrypted\n"
- "messenger protocol."
- msgstr ""
- #: gnu/packages/messaging.scm:1733
- msgid "Lightweight Tox client"
- msgstr ""
- #: gnu/packages/messaging.scm:1735
- msgid ""
- "uTox is a lightweight Tox client. Tox is a distributed and secure\n"
- "instant messenger with audio and video chat capabilities."
- msgstr ""
- #: gnu/packages/messaging.scm:1797
- msgid "Tox chat client using Qt"
- msgstr ""
- #: gnu/packages/messaging.scm:1798
- msgid ""
- "qTox is a Tox client that follows the Tox design\n"
- "guidelines. It provides an easy to use application that allows you to\n"
- "connect with friends and family without anyone else listening in."
- msgstr ""
- #: gnu/packages/messaging.scm:1819
- msgid "Multi-user chat program"
- msgstr ""
- #: gnu/packages/messaging.scm:1820
- msgid ""
- "Ytalk is a replacement for the BSD talk program. Its main\n"
- "advantage is the ability to communicate with any arbitrary number of users at\n"
- "once. It supports both talk protocols (\"talk\" and \"ntalk\") and can communicate\n"
- "with several different talk daemons at the same time."
- msgstr ""
- #: gnu/packages/messaging.scm:1842
- msgid "Portable high-level Jabber/XMPP library for C++"
- msgstr ""
- #: gnu/packages/messaging.scm:1844
- msgid ""
- "gloox is a full-featured Jabber/XMPP client library,\n"
- "written in ANSI C++. It makes writing spec-compliant clients easy\n"
- "and allows for hassle-free integration of Jabber/XMPP functionality\n"
- "into existing applications."
- msgstr ""
- #: gnu/packages/messaging.scm:1914
- msgid ""
- "@code{Net::PSYC} with support for TCP, UDP, Event.pm, @code{IO::Select} and\n"
- "Gtk2 event loops. This package includes 12 applications and additional scripts:\n"
- "psycion (a @uref{https://about.psyc.eu,PSYC} chat client), remotor (a control console\n"
- "for @uref{https://torproject.org,tor} router) and many more."
- msgstr ""
- #: gnu/packages/messaging.scm:1918
- msgid "Perl implementation of PSYC protocol"
- msgstr ""
- #: gnu/packages/messaging.scm:1955
- msgid ""
- "@code{libpsyc} is a PSYC library in C which implements\n"
- "core aspects of PSYC, useful for all kinds of clients and servers\n"
- "including psyced."
- msgstr ""
- #: gnu/packages/messaging.scm:1958
- msgid "PSYC library in C"
- msgstr ""
- #: gnu/packages/messaging.scm:1997
- msgid ""
- "Loudmouth is a lightweight and easy-to-use C library for programming\n"
- "with the XMPP (formerly known as Jabber) protocol. It is designed to be\n"
- "easy to get started with and yet extensible to let you do anything the XMPP\n"
- "protocol allows."
- msgstr ""
- #: gnu/packages/messaging.scm:2001
- msgid "Asynchronous XMPP library"
- msgstr ""
- #: gnu/packages/messaging.scm:2039
- msgid ""
- "Mcabber is a small XMPP (Jabber) console client, which includes features\n"
- "such as SASL and TLS support, @dfn{Multi-User Chat} (MUC) support, logging,\n"
- "command-completion, OpenPGP encryption, @dfn{Off-the-Record Messaging} (OTR)\n"
- "support, and more."
- msgstr ""
- #: gnu/packages/messaging.scm:2043
- msgid "Small XMPP console client"
- msgstr ""
- #: gnu/packages/messaging.scm:2084
- msgid "Extensible console-based Jabber client"
- msgstr ""
- #: gnu/packages/messaging.scm:2086
- msgid ""
- "GNU Freetalk is a command-line Jabber/XMPP chat client. It notably uses\n"
- "the Readline library to handle input, so it features convenient navigation of\n"
- "text as well as tab-completion of buddy names, commands and English words. It\n"
- "is also scriptable and extensible via Guile."
- msgstr ""
- #: gnu/packages/messaging.scm:2126
- msgid "C library for writing XMPP clients"
- msgstr ""
- #: gnu/packages/messaging.scm:2127
- msgid ""
- "Libstrophe is a minimal XMPP library written in C. It has\n"
- "almost no external dependencies, only an XML parsing library (expat or libxml\n"
- "are both supported)."
- msgstr ""
- #: gnu/packages/messaging.scm:2183
- msgid "Console-based XMPP client"
- msgstr ""
- #: gnu/packages/messaging.scm:2184
- msgid ""
- "Profanity is a console based XMPP client written in C\n"
- "using ncurses and libmesode, inspired by Irssi."
- msgstr ""
- #: gnu/packages/messaging.scm:2214
- msgid "Library implementing the client IRC protocol"
- msgstr ""
- #: gnu/packages/messaging.scm:2215
- msgid ""
- "Libircclient is a library which implements the client IRC\n"
- "protocol. It is designed to be small, fast, portable and compatible with the\n"
- "RFC standards as well as non-standard but popular features. It can be used for\n"
- "building the IRC clients and bots."
- msgstr ""
- #: gnu/packages/messaging.scm:2272
- msgid "Tox chat client using ncurses"
- msgstr ""
- #: gnu/packages/messaging.scm:2273
- msgid ""
- "Toxic is a console-based instant messaging client, using\n"
- "c-toxcore and ncurses. It provides audio calls, sound and desktop\n"
- "notifications, and Python scripting support."
- msgstr ""
- #: gnu/packages/messaging.scm:2298
- msgid "Qt5 client library for the Matrix instant messaging protocol"
- msgstr ""
- #: gnu/packages/messaging.scm:2299
- msgid ""
- "libqmatrixclient is a Qt5 library to write clients for the\n"
- "Matrix instant messaging protocol. Quaternion is the reference client\n"
- "implementation. Quaternion and libqmatrixclient together form the\n"
- "QMatrixClient project."
- msgstr ""
- #: gnu/packages/messaging.scm:2346
- msgid "Client API library for the Matrix protocol"
- msgstr ""
- #: gnu/packages/messaging.scm:2347
- msgid ""
- "@code{mtxclient} is a C++ library that implements client API\n"
- "for the Matrix protocol. It is built on to of @code{Boost.Asio}."
- msgstr ""
- #: gnu/packages/messaging.scm:2441
- msgid "Desktop client for Matrix using Qt and C++14"
- msgstr ""
- #: gnu/packages/messaging.scm:2442
- msgid ""
- "@code{Nheko} want to provide a native desktop app for the\n"
- "Matrix protocol that feels more like a mainstream chat app and less like an IRC\n"
- "client.\n"
- "\n"
- "Many matrix features are supported, including user registration, rooms, typing\n"
- "notification, emojis, E2E encryption, and voip calls."
- msgstr ""
- #: gnu/packages/messaging.scm:2479
- msgid "Graphical client for the Matrix instant messaging protocol"
- msgstr ""
- #: gnu/packages/messaging.scm:2480
- msgid ""
- "Quaternion is a Qt5 desktop client for the Matrix instant\n"
- "messaging protocol. It uses libqmatrixclient and is its reference client\n"
- "implementation. Quaternion and libqmatrixclient together form the\n"
- "QMatrixClient project."
- msgstr ""
- #: gnu/packages/messaging.scm:2525
- msgid "Instant messaging client for Google Hangouts"
- msgstr ""
- #: gnu/packages/messaging.scm:2527
- msgid ""
- "Hangups is an instant messaging client for Google Hangouts. It includes\n"
- "both a Python library and a reference client with a text-based user interface.\n"
- "\n"
- "Hangups is implements a reverse-engineered version of Hangouts' proprietary,\n"
- "non-interoperable protocol, which allows it to support features like group\n"
- "messaging that aren’t available to clients that connect over XMPP."
- msgstr ""
- #: gnu/packages/messaging.scm:2607
- msgid "Telegram messaging support for Pidgin"
- msgstr ""
- #: gnu/packages/messaging.scm:2609
- msgid ""
- "Telegram-purple is a plugin for Libpurple, the communication library\n"
- "used by the Pidgin instant messaging client, that adds support for the\n"
- "Telegram messenger.\n"
- "\n"
- "This package is on ``life support'' until @code{tdlib-purple} is a full\n"
- "replacement."
- msgstr ""
- #: gnu/packages/messaging.scm:2649
- msgid "Cross-platform library for building Telegram clients"
- msgstr ""
- #: gnu/packages/messaging.scm:2650
- msgid ""
- "Tdlib is a cross-platform library for creating custom\n"
- "Telegram clients following the official Telegram API. It can be easily used\n"
- "from almost any programming language with a C-FFI and features first-class\n"
- "support for high performance Telegram Bot creation."
- msgstr ""
- #: gnu/packages/messaging.scm:2702
- msgid "Libpurple plugin for SMS via ModemManager"
- msgstr ""
- #: gnu/packages/messaging.scm:2703
- msgid "Plugin for libpurple to allow sending SMS using ModemManager."
- msgstr ""
- #: gnu/packages/messaging.scm:2747
- msgid "OMEMO Encryption for libpurple"
- msgstr ""
- #: gnu/packages/messaging.scm:2748
- msgid ""
- "Purple-lurch plugin adds end-to-end encryption support\n"
- "through the Double Ratchet (Axolotl) algorithm, to @code{libpurple}\n"
- "applications using @acronym{XMPP, Extensible Messaging and Presence Protocol},\n"
- "through its standard XEP-0384: @acronym{OMEMO, OMEMO Multi-End Message and\n"
- "Object Encryption} Encryption. It provides confidentiality, (weak) forward\n"
- "secrecy, break-in recovery, authentication, integrity, deniability, and\n"
- "asynchronicity."
- msgstr ""
- #: gnu/packages/messaging.scm:2784
- msgid "Library for parsing and using phone numbers"
- msgstr ""
- #: gnu/packages/messaging.scm:2786
- msgid ""
- "This package provides a C++ library for parsing, formatting, and\n"
- "validating international phone numbers."
- msgstr ""
- #: gnu/packages/messaging.scm:2851
- msgid "Mobile client for XMPP and SMS messaging"
- msgstr ""
- #: gnu/packages/messaging.scm:2852
- msgid ""
- "Chatty is a chat program for XMPP and SMS. It works on mobile\n"
- "as well as on desktop platforms. It's based on libpurple and ModemManager."
- msgstr ""
- #: gnu/packages/messaging.scm:2872
- msgid "Message broker"
- msgstr ""
- #: gnu/packages/messaging.scm:2873
- msgid ""
- "This package provides Eclipse Mosquitto, a message broker\n"
- "that implements the MQTT protocol versions 5.0, 3.1.1 and 3.1. Mosquitto\n"
- "is lightweight and is suitable for use on all devices from low power single\n"
- "board computers to full servers.\n"
- "\n"
- "The MQTT protocol provides a lightweight method of carrying out messaging\n"
- "using a publish/subscribe model. This makes it suitable for Internet of\n"
- "Things messaging such as with low power sensors or mobile devices such\n"
- "as phones, embedded computers or microcontrollers."
- msgstr ""
- #: gnu/packages/messaging.scm:2908
- msgid "Python implementation of an MQTT client class"
- msgstr ""
- #: gnu/packages/messaging.scm:2909
- msgid ""
- "MQTT and MQTT-SN are lightweight publish/subscribe messaging\n"
- "transports for TCP/IP and connection-less protocols (such as UDP). The\n"
- "Eclipse Paho project provides client side implementations of MQTT and MQTT-SN\n"
- "in a variety of programming languages. This package is for the Python\n"
- "implementation of an MQTT version client class."
- msgstr ""
- #: gnu/packages/messaging.scm:2951
- msgid "Desktop Application for Movim"
- msgstr ""
- #: gnu/packages/messaging.scm:2953
- msgid ""
- "Movim-Desktop is a desktop application, relying on Qt, for the Movim\n"
- "social and chat platform."
- msgstr ""
- #: gnu/packages/messaging.scm:3086
- msgid "Qt-based XMPP Client"
- msgstr ""
- #: gnu/packages/messaging.scm:3088
- msgid ""
- "Psi+ is a spin-off of Psi XMPP client. It is a powerful XMPP client\n"
- "designed for experienced users."
- msgstr ""
- #: gnu/packages/messaging.scm:3129
- msgid "Zulip's API Python bindings"
- msgstr ""
- #: gnu/packages/messaging.scm:3131
- msgid "This package provides Python bindings to Zulip's API."
- msgstr ""
- #: gnu/packages/messaging.scm:3179
- msgid "Zulip's official terminal client"
- msgstr ""
- #: gnu/packages/messaging.scm:3180
- msgid "This package contains Zulip's official terminal client."
- msgstr ""
- #: gnu/packages/messaging.scm:3229
- msgid "Bridge together various messaging networks and protocols"
- msgstr ""
- #: gnu/packages/messaging.scm:3231
- msgid ""
- "Relays messages between different channels from various\n"
- "messaging networks and protocols. So far it supports mattermost, IRC, gitter,\n"
- "xmpp, slack, discord, telegram, rocketchat, twitch, ssh-chat, zulip, whatsapp,\n"
- "keybase, matrix, microsoft teams, nextcloud, mumble, vk and more with REST\n"
- "API. Mattermost is not required."
- msgstr ""
- #: gnu/packages/messaging.scm:3266
- msgid "FIFO based Jabber client"
- msgstr ""
- #: gnu/packages/messaging.scm:3268
- msgid ""
- "jj is a simple file-system-based Jabber client, inspired by ii IRC\n"
- "client. Interaction with jj is done by writing and reading files from the\n"
- "server directory which jj creates. It is perfect for bots and\n"
- "notifications."
- msgstr ""
- #: gnu/packages/messaging.scm:3297
- msgid "Simple multi-client TLS-only IRC bouncer"
- msgstr ""
- #: gnu/packages/messaging.scm:3299
- msgid ""
- "@command{pounce} is a multi-client, TLS-only IRC bouncer. It maintains\n"
- "a persistent connection to an IRC server, acting as a proxy and buffer for\n"
- "a number of clients."
- msgstr ""
- #: gnu/packages/messaging.scm:3364
- msgid "Weechat Matrix protocol script"
- msgstr ""
- #: gnu/packages/messaging.scm:3365
- msgid ""
- "@code{weechat-matrix} is a Python plugin for Weechat that lets\n"
- "Weechat communicate over the Matrix protocol."
- msgstr ""
- #: gnu/packages/messaging.scm:3411
- msgid "Weechat Slack script"
- msgstr ""
- #: gnu/packages/messaging.scm:3412
- msgid ""
- "@code{weechat-wee-slack} is a WeeChat native client for\n"
- "Slack. It provides supplemental features only available in the web/mobile\n"
- "clients such as synchronizing read markers, typing notification, threads (and\n"
- "more)! It connects via the Slack API, and maintains a persistent websocket\n"
- "for notification of events."
- msgstr ""
- #: gnu/packages/messaging.scm:3435
- msgid "Show CAPTCHA without running proprietary code"
- msgstr ""
- #: gnu/packages/messaging.scm:3436
- msgid "This package shows CAPTCHA without running proprietary code."
- msgstr ""
- #: gnu/packages/messaging.scm:3458
- msgid "Discord account management"
- msgstr ""
- #: gnu/packages/messaging.scm:3459
- msgid ""
- "This package provides account management tools for\n"
- "Discord."
- msgstr ""
- "이 꾸러미는 디스코드를 위한 계정 관리 도구를\n"
- "제공합니다."
- #: gnu/packages/messaging.scm:3476
- msgid "Discord RPC client"
- msgstr ""
- #: gnu/packages/messaging.scm:3477
- msgid ""
- "This package provides @code{python-pypresence}, a Discord\n"
- "RPC client written in Python."
- msgstr ""
- #: gnu/packages/messaging.scm:3505
- msgid "Command-line validation tool for phone numbers"
- msgstr ""
- #: gnu/packages/messaging.scm:3507
- msgid ""
- "@code{pn} provides a command line tool that allows users to operate on\n"
- "phone numbers (get validity information, reformat them, or extract numbers from\n"
- "a text snippet), using @code{libphonenumber}."
- msgstr ""
- #: gnu/packages/mpd.scm:112
- msgid "Music Player Daemon client library"
- msgstr ""
- #: gnu/packages/mpd.scm:113
- msgid ""
- "A stable, documented, asynchronous API library for\n"
- "interfacing MPD in the C, C++ & Objective C languages."
- msgstr ""
- #: gnu/packages/mpd.scm:203
- msgid "Music Player Daemon"
- msgstr ""
- #: gnu/packages/mpd.scm:204
- msgid ""
- "Music Player Daemon (MPD) is a flexible, powerful,\n"
- "server-side application for playing music. Through plugins and libraries it\n"
- "can play a variety of sound files while being controlled by its network\n"
- "protocol."
- msgstr ""
- #: gnu/packages/mpd.scm:240
- msgid "Music Player Daemon client"
- msgstr ""
- #: gnu/packages/mpd.scm:241
- msgid ""
- "MPC is a minimalist command line interface to MPD, the music\n"
- "player daemon."
- msgstr ""
- #: gnu/packages/mpd.scm:265
- msgid "Curses Music Player Daemon client"
- msgstr ""
- #: gnu/packages/mpd.scm:266
- msgid ""
- "ncmpc is a fully featured MPD client, which runs in a\n"
- "terminal using ncurses."
- msgstr ""
- #: gnu/packages/mpd.scm:296
- msgid "Featureful ncurses based MPD client inspired by ncmpc"
- msgstr ""
- #: gnu/packages/mpd.scm:297
- msgid ""
- "Ncmpcpp is an mpd client with a UI very similar to ncmpc,\n"
- "but it provides new useful features such as support for regular expressions\n"
- "for library searches, extended song format, items filtering, the ability to\n"
- "sort playlists, and a local file system browser."
- msgstr ""
- #: gnu/packages/mpd.scm:318
- msgid "MPD client for track scrobbling"
- msgstr ""
- #: gnu/packages/mpd.scm:319
- msgid ""
- "mpdscribble is a Music Player Daemon client which submits\n"
- "information about tracks being played to a scrobbler, such as Libre.FM."
- msgstr ""
- #: gnu/packages/mpd.scm:343
- msgid "Python MPD client library"
- msgstr ""
- #: gnu/packages/mpd.scm:344
- msgid ""
- "Python-mpd2 is a Python library which provides a client\n"
- "interface for the Music Player Daemon."
- msgstr ""
- #: gnu/packages/mpd.scm:390
- msgid "Elegant client for the Music Player Daemon"
- msgstr ""
- #: gnu/packages/mpd.scm:391
- msgid ""
- "Sonata is an elegant graphical client for the Music Player\n"
- "Daemon (MPD). It supports playlists, multiple profiles (connecting to different\n"
- "MPD servers, search and multimedia key support."
- msgstr ""
- #: gnu/packages/mpd.scm:424
- msgid "Automatic library-wide shuffle for mpd"
- msgstr ""
- #: gnu/packages/mpd.scm:425
- msgid ""
- "ashuffle is an application for automatically shuffling your\n"
- "MPD library in a similar way to many other music players' 'shuffle library'\n"
- "feature. ashuffle works like any other MPD client, and can be used alongside\n"
- "other MPD frontends."
- msgstr ""
- #: gnu/packages/mpd.scm:468
- msgid "MPRIS V2.1 support for MPD"
- msgstr ""
- #: gnu/packages/mpd.scm:469
- msgid ""
- "mpDris2 is a client for the Music Player Daemon providing\n"
- "MPRIS 2 support."
- msgstr ""
- #: gnu/packages/mpd.scm:505
- msgid "Graphical MPD Client"
- msgstr ""
- #: gnu/packages/mpd.scm:506
- msgid ""
- "Cantata is a graphical client for the Music Player Daemon\n"
- "(MPD), using the Qt5 toolkit. Its user interface is highly customizable,\n"
- "supporting multiple collections, ratings, and dynamic playlists. A local cache\n"
- "of the music library will be created to provide a hierarchy of albums and\n"
- "artists along with albumart."
- msgstr ""
- #: gnu/packages/mpd.scm:552
- msgid "Covergrid for the MPD"
- msgstr ""
- #: gnu/packages/mpd.scm:554
- msgid ""
- "mcg (CoverGrid) is a client for the Music Player Daemon (MPD), focusing\n"
- "on albums instead of single tracks. It is not intended to be a replacement\n"
- "for your favorite MPD client but an addition to get a better\n"
- "album-experience."
- msgstr ""
- #: gnu/packages/mpd.scm:593
- msgid "Music browser for the MPD"
- msgstr ""
- #: gnu/packages/mpd.scm:594
- msgid ""
- "mpdevil is a music browser for the Music Player Daemon (MPD),\n"
- "which is focused on playing local music without the need of managing playlists.\n"
- "Instead of maintaining a client side database of your music library,\n"
- "mpdevil loads all tags and covers on demand."
- msgstr ""
- #: gnu/packages/mpd.scm:619
- msgid "Web-based MPD client"
- msgstr ""
- #: gnu/packages/mpd.scm:620
- msgid ""
- "MyMPD is a mobile-friendly web client for the MPD music\n"
- "player daemon."
- msgstr ""
- #: gnu/packages/netpbm.scm:187
- msgid "Toolkit for manipulation of images"
- msgstr ""
- #: gnu/packages/netpbm.scm:189
- msgid ""
- "Netpbm is a toolkit for the manipulation of graphic images, including\n"
- "the conversion of images between a variety of different formats.\n"
- "There are over 300 separate tools in the package including converters for\n"
- "about 100 graphics formats."
- msgstr ""
- #: gnu/packages/nettle.scm:74
- msgid "C library for low-level cryptographic functionality"
- msgstr ""
- #: gnu/packages/nettle.scm:76
- msgid ""
- "GNU Nettle is a low-level cryptographic library. It is designed to\n"
- "fit in easily in almost any context. It can be easily included in\n"
- "cryptographic toolkits for object-oriented languages or in applications\n"
- "themselves."
- msgstr ""
- #: gnu/packages/networking.scm:192
- msgid "SCTP user-land implementation"
- msgstr ""
- #: gnu/packages/networking.scm:193
- msgid ""
- "UsrSCTP is a portable SCTP userland stack. SCTP is a message\n"
- "oriented, reliable transport protocol with direct support for multihoming that\n"
- "runs on top of IP or UDP, and supports both v4 and v6 versions."
- msgstr ""
- #: gnu/packages/networking.scm:220
- msgid "Discover and fingerprint IP hosts on the local network using ARP"
- msgstr ""
- #: gnu/packages/networking.scm:221
- msgid ""
- "Arp-scan is a tool that uses ARP to discover and fingerprint\n"
- "IP hosts on the local network."
- msgstr ""
- #: gnu/packages/networking.scm:243
- msgid "Light command line download accelerator"
- msgstr ""
- #: gnu/packages/networking.scm:245
- msgid ""
- "Axel tries to accelerate the download process by using multiple\n"
- "connections per file, and can also balance the load between different\n"
- "servers. It tries to be as light as possible, so it might be useful\n"
- "on byte-critical systems. It supports HTTP, HTTPS, FTP and FTPS\n"
- "protocols."
- msgstr ""
- #: gnu/packages/networking.scm:275
- msgid "Librecast RaptorQ library"
- msgstr ""
- #: gnu/packages/networking.scm:277
- msgid ""
- "C library implementation of RaptorQ Forward Error Correction for\n"
- "Librecast. RFC6330 (IETF) describes the RaptorQ proposed standard, which LCRQ\n"
- "more-or-less follows. The primary focus has been on building a fast, simple\n"
- "and dependency-free FEC implementation for use with Librecast, and not on\n"
- "strict standards compliance. The code does, however, fairly closely follow\n"
- "the RFC."
- msgstr ""
- #: gnu/packages/networking.scm:337
- msgid "Librecast file and data syncing tool"
- msgstr ""
- #: gnu/packages/networking.scm:339
- msgid ""
- "lcsync is a tool to sync files over IPv6 multicast or the\n"
- "local filesystem. It splits the file into blocks, hashes them, and compares\n"
- "them in order to efficiently transfer a minimal amount of data."
- msgstr ""
- #: gnu/packages/networking.scm:407
- msgid "Camera stack and framework"
- msgstr ""
- #: gnu/packages/networking.scm:408
- msgid ""
- "LibCamera is a complex camera support library for GNU+Linux,\n"
- "Android, and ChromeOS."
- msgstr ""
- #: gnu/packages/networking.scm:477
- msgid "GLib ICE implementation"
- msgstr ""
- #: gnu/packages/networking.scm:478
- msgid ""
- "LibNice is a library that implements the Interactive\n"
- "Connectivity Establishment (ICE) standard (RFC 5245 & RFC 8445). It provides a\n"
- "GLib-based library, libnice, as well as GStreamer elements to use it."
- msgstr ""
- #: gnu/packages/networking.scm:530
- msgid "IPv6 multicast library"
- msgstr ""
- #: gnu/packages/networking.scm:531
- msgid ""
- "Librecast is a C library which supports IPv6 multicast\n"
- "networking."
- msgstr ""
- #: gnu/packages/networking.scm:584
- msgid "Tools and library for handling RTMP streams"
- msgstr ""
- #: gnu/packages/networking.scm:585
- msgid ""
- "RTMPdump is a toolkit for RTMP streams. All forms of RTMP are\n"
- "supported, including rtmp://, rtmpt://, rtmpe://, rtmpte://, and rtmps://."
- msgstr ""
- #: gnu/packages/networking.scm:613
- msgid "Network load monitor"
- msgstr ""
- #: gnu/packages/networking.scm:615
- msgid ""
- "Slurm is a network load monitor. It shows real-time traffic statistics\n"
- "from any network device in any of three ASCII graph formats."
- msgstr ""
- #: gnu/packages/networking.scm:647
- msgid "Secure Reliable Transport"
- msgstr ""
- #: gnu/packages/networking.scm:648
- msgid ""
- "SRT is a transport technology that optimizes streaming\n"
- "performance across unpredictable networks, such as the Internet."
- msgstr ""
- #: gnu/packages/networking.scm:671
- msgid "@acronym{SCTP, Stream Control Transmission Protocol} helpers for Linux"
- msgstr ""
- #: gnu/packages/networking.scm:673
- msgid ""
- "The lksctp-tools project provides a user-space library for @acronym{SCTP,\n"
- "the Stream Control Transmission Protocol} (@file{libsctp}) and C language header\n"
- "files (@file{netinet/sctp.h}) for accessing SCTP-specific @acronym{APIs,\n"
- "application programming interfaces} not provided by the standard sockets.\n"
- "It also includes some SCTP-related helper utilities."
- msgstr ""
- #: gnu/packages/networking.scm:713
- msgid "Python module for the SCTP protocol stack and library"
- msgstr ""
- #: gnu/packages/networking.scm:714
- msgid ""
- "@code{pysctp} implements the SCTP socket API. You need a\n"
- "SCTP-aware kernel (most are)."
- msgstr ""
- #: gnu/packages/networking.scm:757
- msgid "Wireless network and device detector"
- msgstr ""
- #: gnu/packages/networking.scm:759
- msgid ""
- "This package provides a wireless network and device detector, sniffer,\n"
- "wardriving tool, and WIDS (wireless intrusion detection) framework. Kismet\n"
- "works with Wi-Fi interfaces, Bluetooth interfaces, some SDR\n"
- "(software defined radio) hardware like the RTLSDR, and other specialized\n"
- "capture hardware"
- msgstr ""
- #: gnu/packages/networking.scm:785
- msgid "Small port-knock daemon"
- msgstr ""
- #: gnu/packages/networking.scm:786
- msgid ""
- "@command{knockd} is a port-knock daemon. It listens to all traffic on\n"
- "an ethernet or PPP interface, looking for special \"knock\" sequences of @dfn{port-hits}\n"
- "(UDP/TCP packets sent to a server port). This port need not be open, since knockd listens\n"
- "at the link-layer level."
- msgstr ""
- #: gnu/packages/networking.scm:825
- msgid "Lightweight messaging library"
- msgstr ""
- #: gnu/packages/networking.scm:826
- msgid ""
- "NNG project is a rewrite of the scalability protocols library\n"
- "known as libnanomsg, and adds significant new capabilities, while retaining\n"
- "compatibility with the original. It is a lightweight, broker-less library,\n"
- "offering a simple API to solve common recurring messaging problems, such as\n"
- "publish/subscribe, RPC-style request/reply, or service discovery."
- msgstr ""
- #: gnu/packages/networking.scm:868
- msgid "Scalable socket library"
- msgstr ""
- #: gnu/packages/networking.scm:869
- msgid ""
- "Nanomsg is a socket library that provides several common\n"
- "communication patterns. It aims to make the networking layer fast, scalable,\n"
- "and easy to use. Implemented in C, it works on a wide range of operating\n"
- "systems with no further dependencies."
- msgstr ""
- #: gnu/packages/networking.scm:978
- msgid "GTK+ Bluetooth manager"
- msgstr ""
- #: gnu/packages/networking.scm:979
- msgid ""
- "Blueman is a Bluetooth management utility using the Bluez\n"
- "D-Bus backend. It is designed to be easy to use for most common Bluetooth\n"
- "tasks."
- msgstr ""
- #: gnu/packages/networking.scm:1005
- msgid "NetworkManager front-end with information icon residing in system tray"
- msgstr ""
- #: gnu/packages/networking.scm:1007
- msgid ""
- "nm-tray is a network connection management tool (NetworkManager\n"
- "front-end) with an information icon residing in the system tray. Unlike\n"
- "nm-applet, which is part of GNOME, this application is desktop-unaware."
- msgstr ""
- #: gnu/packages/networking.scm:1030
- msgid "Viewing and manipulating MAC addresses of network interfaces"
- msgstr ""
- #: gnu/packages/networking.scm:1031
- msgid ""
- "GNU MAC Changer is a utility for viewing and changing MAC\n"
- "addresses of networking devices. New addresses may be set explicitly or\n"
- "randomly. They can include MAC addresses of the same or other hardware vendors\n"
- "or, more generally, MAC addresses of the same category of hardware."
- msgstr ""
- #: gnu/packages/networking.scm:1077
- msgid "Teredo IPv6 tunneling software"
- msgstr ""
- #: gnu/packages/networking.scm:1079
- msgid ""
- "Miredo is an implementation (client, relay, server) of the Teredo\n"
- "specification, which provides IPv6 Internet connectivity to IPv6 enabled hosts\n"
- "residing in IPv4-only networks, even when they are behind a NAT device."
- msgstr ""
- #: gnu/packages/networking.scm:1097
- msgid "IPv6 diagnostic tools"
- msgstr ""
- #: gnu/packages/networking.scm:1099
- msgid ""
- "NDisc6 is a collection of tools for IPv6 networking diagnostics.\n"
- "It includes the following programs:\n"
- "\n"
- "@itemize\n"
- "@item @command{ndisc6}: ICMPv6 Neighbor Discovery tool.\n"
- "@item @command{rdisc6}: ICMPv6 Router Discovery tool.\n"
- "@item @command{tcptraceroute6}: IPv6 traceroute over TCP.\n"
- "@item @command{traceroute6}: IPv6 traceroute over UDP.\n"
- "@item @command{rdnssd}: Recursive DNS Servers discovery daemon.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/networking.scm:1150
- msgid "Proxy ARP requests to other interfaces"
- msgstr ""
- #: gnu/packages/networking.scm:1152
- msgid ""
- "@command{parprouted} is a daemon for transparent IP (Layer@tie{}3)\n"
- "proxy ARP bridging. Unlike standard bridging, proxy ARP bridging can bridge\n"
- "Ethernet networks behind wireless nodes. Normal layer@tie{}2 bridging does\n"
- "not work between wireless nodes because wireless does not know about MAC\n"
- "addresses used in the wired Ethernet networks. This daemon can also be\n"
- "useful for making transparent firewalls."
- msgstr ""
- #: gnu/packages/networking.scm:1189
- msgid "Multi-protocol network proxy"
- msgstr ""
- #: gnu/packages/networking.scm:1191
- msgid ""
- "@command{pproxy} is an asynchronuous proxy server implemented with\n"
- "Python 3 @code{asyncio}. Among the supported protocols are HTTP, SOCKS\n"
- "and SSH, and it can use both TCP and UDP as transport mechanisms."
- msgstr ""
- #: gnu/packages/networking.scm:1213
- msgid "Open bidirectional communication channels from the command line"
- msgstr ""
- #: gnu/packages/networking.scm:1215
- msgid ""
- "socat is a relay for bidirectional data transfer between two independent\n"
- "data channels---files, pipes, devices, sockets, etc. It can create\n"
- "\"listening\" sockets, named pipes, and pseudo terminals.\n"
- "\n"
- "socat can be used, for instance, as TCP port forwarder, as a shell interface\n"
- "to UNIX sockets, IPv6 relay, for redirecting TCP oriented programs to a serial\n"
- "line, to logically connect serial lines on different computers, or to\n"
- "establish a relatively secure environment (su and chroot) for running client\n"
- "or server shell scripts with network connections."
- msgstr ""
- #: gnu/packages/networking.scm:1244
- msgid "Swiss army knife for data stream buffering (network aware)"
- msgstr ""
- #: gnu/packages/networking.scm:1246
- msgid ""
- "mbuffer is a tool for buffering data streams with a large set of features:\n"
- "\n"
- "@itemize\n"
- "@item direct support for TCP based network targets (IPv4 and IPv6)\n"
- "@item ability to send to multiple targets in parallel (distribution mode)\n"
- "@item support for multiple volumes\n"
- "@item I/O rate limitation\n"
- "@item high/low watermark based restart criteria\n"
- "@item configurable buffer size\n"
- "@item on the fly MD5 hash calculation\n"
- "@item highly efficient, multi-threaded implementation\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/networking.scm:1341
- msgid "Monitor and filter incoming requests for network services"
- msgstr ""
- #: gnu/packages/networking.scm:1342
- msgid ""
- "With this package you can monitor and filter incoming requests for\n"
- "network services. It includes a library which may be used by daemons to\n"
- "transparently check connection attempts against an access control list."
- msgstr ""
- #: gnu/packages/networking.scm:1363
- msgid "Library for message-based applications"
- msgstr ""
- #: gnu/packages/networking.scm:1365
- msgid ""
- "The 0MQ lightweight messaging kernel is a library which extends the\n"
- "standard socket interfaces with features traditionally provided by specialized\n"
- "messaging middle-ware products. 0MQ sockets provide an abstraction of\n"
- "asynchronous message queues, multiple messaging patterns, message\n"
- "filtering (subscriptions), seamless access to multiple transport protocols and\n"
- "more."
- msgstr ""
- #: gnu/packages/networking.scm:1392
- msgid "High-level C bindings for ØMQ"
- msgstr ""
- #: gnu/packages/networking.scm:1394
- msgid ""
- "czmq provides bindings for the ØMQ core API that hides the differences\n"
- "between different versions of ØMQ."
- msgstr ""
- #: gnu/packages/networking.scm:1419
- msgid "C++ bindings for the ØMQ messaging library"
- msgstr ""
- #: gnu/packages/networking.scm:1421
- msgid ""
- "This package provides header-only C++ bindings for ØMQ. The header\n"
- "files contain direct mappings of the abstractions provided by the ØMQ C API."
- msgstr ""
- #: gnu/packages/networking.scm:1453
- msgid "C library implementing NAT-PMP"
- msgstr ""
- #: gnu/packages/networking.scm:1455
- msgid ""
- "@code{libnatpmp} is a portable and asynchronous implementation of\n"
- "the Network Address Translation - Port Mapping Protocol (NAT-PMP)\n"
- "written in the C programming language."
- msgstr ""
- #: gnu/packages/networking.scm:1491
- msgid "Apache Kafka C/C++ client library"
- msgstr ""
- #: gnu/packages/networking.scm:1493
- msgid ""
- "librdkafka is a C library implementation of the Apache Kafka protocol,\n"
- "containing both Producer and Consumer support."
- msgstr ""
- #: gnu/packages/networking.scm:1510
- msgid "Library for Neighbor Discovery Protocol"
- msgstr ""
- #: gnu/packages/networking.scm:1512
- msgid ""
- "libndp contains a library which provides a wrapper for IPv6 Neighbor\n"
- "Discovery Protocol. It also provides a tool named ndptool for sending and\n"
- "receiving NDP messages."
- msgstr ""
- #: gnu/packages/networking.scm:1534
- msgid "Display or change Ethernet device settings"
- msgstr ""
- #: gnu/packages/networking.scm:1536
- msgid ""
- "ethtool can be used to query and change settings such as speed,\n"
- "auto-negotiation and checksum offload on many network devices, especially\n"
- "Ethernet devices."
- msgstr ""
- #: gnu/packages/networking.scm:1568
- msgid "Text based network interface status monitor"
- msgstr ""
- #: gnu/packages/networking.scm:1570
- msgid ""
- "IFStatus is a simple, easy-to-use program for displaying commonly\n"
- "needed/wanted real-time traffic statistics of multiple network\n"
- "interfaces, with a simple and efficient view on the command line. It is\n"
- "intended as a substitute for the PPPStatus and EthStatus projects."
- msgstr ""
- #: gnu/packages/networking.scm:1617
- msgid "Collection of network utilities"
- msgstr ""
- #: gnu/packages/networking.scm:1619
- msgid ""
- "This package contains a variety of tools for dealing with network\n"
- "configuration, troubleshooting, or servers. Utilities included are:\n"
- "\n"
- "@itemize @bullet\n"
- "@item @command{arping}: Ping hosts using the @dfn{Address Resolution Protocol}.\n"
- "@item @command{clockdiff}: Compute time difference between network hosts\n"
- "using ICMP TSTAMP messages.\n"
- "@item @command{ninfod}: Daemon that responds to IPv6 Node Information Queries.\n"
- "@item @command{ping}: Use ICMP ECHO messages to measure round-trip delays\n"
- "and packet loss across network paths.\n"
- "@item @command{rarpd}: Answer RARP requests from clients.\n"
- "@item @command{rdisc}: Populate network routing tables with information from\n"
- "the ICMP router discovery protocol.\n"
- "@item @command{tftpd}: Trivial file transfer protocol server.\n"
- "@item @command{tracepath}: Trace network path to an IPv4 or IPv6 address and\n"
- "discover MTU along the way.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/networking.scm:1658
- msgid "Realtime console network usage monitor"
- msgstr ""
- #: gnu/packages/networking.scm:1660
- msgid ""
- "Nload is a console application which monitors network traffic and\n"
- "bandwidth usage in real time. It visualizes the in- and outgoing traffic using\n"
- "two graphs, and provides additional info like total amount of transferred data\n"
- "and min/max network usage."
- msgstr ""
- #: gnu/packages/networking.scm:1703
- msgid "Tunnel IPv4 data through a DNS server"
- msgstr ""
- #: gnu/packages/networking.scm:1704
- msgid ""
- "Iodine tunnels IPv4 data through a DNS server. This\n"
- "can be useful in different situations where internet access is firewalled, but\n"
- "DNS queries are allowed. The bandwidth is asymmetrical, with limited upstream\n"
- "and up to 1 Mbit/s downstream."
- msgstr ""
- #: gnu/packages/networking.scm:1743
- msgid "Intelligent client for the WHOIS directory service"
- msgstr ""
- #: gnu/packages/networking.scm:1745
- msgid ""
- "whois searches for an object in a @dfn{WHOIS} (RFC 3912) database.\n"
- "It is commonly used to look up the registered users or assignees of an Internet\n"
- "resource, such as a domain name, an IP address block, or an autonomous system.\n"
- "It can automatically select the appropriate server for most queries.\n"
- "\n"
- "For historical reasons, this package also includes @command{mkpasswd}, which\n"
- "encrypts passwords using @code{crypt(3)} and is unrelated to the Expect command\n"
- "of the same name."
- msgstr ""
- #: gnu/packages/networking.scm:1827
- msgid "Network traffic analyzer"
- msgstr ""
- #: gnu/packages/networking.scm:1828
- msgid ""
- "Wireshark is a network protocol analyzer, or @dfn{packet\n"
- "sniffer}, that lets you capture and interactively browse the contents of\n"
- "network frames."
- msgstr ""
- #: gnu/packages/networking.scm:1848
- msgid "Send ICMP ECHO_REQUEST packets to network hosts"
- msgstr ""
- #: gnu/packages/networking.scm:1850
- msgid ""
- "fping is a ping-like program which uses @acronym{ICMP, Internet Control\n"
- "Message Protocol} echo requests to determine if a target host is responding.\n"
- "\n"
- "@command{fping} differs from @command{ping} in that you can specify any number\n"
- "of targets on the command line, or specify a file containing the lists of\n"
- "targets to ping. Instead of sending to one target until it times out or\n"
- "replies, fping will send out a ping packet and move on to the next target in a\n"
- "round-robin fashion."
- msgstr ""
- #: gnu/packages/networking.scm:1899
- msgid "Command-line interface to the Gandi.net Web API"
- msgstr ""
- #: gnu/packages/networking.scm:1901
- msgid ""
- "This package provides a command-line client (@command{gandi}) to buy,\n"
- "manage, and delete Internet resources from Gandi.net such as domain names,\n"
- "virtual machines, and certificates."
- msgstr ""
- #: gnu/packages/networking.scm:1926
- msgid "Simple network namespace handling for Go"
- msgstr ""
- #: gnu/packages/networking.scm:1927
- msgid ""
- "The netns package provides a simple interface for\n"
- "handling network namespaces in Go."
- msgstr ""
- #: gnu/packages/networking.scm:1953
- msgid "SCTP library for the Go programming language"
- msgstr ""
- #: gnu/packages/networking.scm:1954
- msgid ""
- "This library provides methods for using the stream control\n"
- "transmission protocol (SCTP) in a Go application."
- msgstr ""
- #: gnu/packages/networking.scm:1981
- msgid "Web server latency and throughput monitor"
- msgstr ""
- #: gnu/packages/networking.scm:1983
- msgid ""
- "httping measures how long it takes to connect to a web server, send an\n"
- "HTTP(S) request, and receive the reply headers. It is somewhat similar to\n"
- "@command{ping}, but can be used even in cases where ICMP traffic is blocked\n"
- "by firewalls or when you want to monitor the response time of the actual web\n"
- "application stack itself."
- msgstr ""
- #: gnu/packages/networking.scm:2020
- msgid "Visualize curl statistics"
- msgstr ""
- #: gnu/packages/networking.scm:2022
- msgid ""
- "@command{httpstat} is a tool to visualize statistics from the\n"
- "@command{curl} HTTP client. It acts as a wrapper for @command{curl} and\n"
- "prints timing information for each step of the HTTP request (DNS lookup,\n"
- "TCP connection, TLS handshake and so on) in the terminal."
- msgstr ""
- #: gnu/packages/networking.scm:2063
- msgid "Web caching proxy"
- msgstr ""
- #: gnu/packages/networking.scm:2064
- msgid ""
- "Squid is a caching proxy for the Web supporting HTTP, HTTPS,\n"
- "FTP, and more. It reduces bandwidth and improves response times by caching and\n"
- "reusing frequently-requested web pages."
- msgstr ""
- #: gnu/packages/networking.scm:2097
- msgid "Console based live network and disk I/O bandwidth monitor"
- msgstr ""
- #: gnu/packages/networking.scm:2098
- msgid ""
- "Bandwidth Monitor NG is a small and simple console based\n"
- "live network and disk I/O bandwidth monitor."
- msgstr ""
- #: gnu/packages/networking.scm:2149
- msgid "Assess WiFi network security"
- msgstr ""
- #: gnu/packages/networking.scm:2151
- msgid ""
- "Aircrack-ng is a complete suite of tools to assess WiFi network\n"
- "security. It focuses on different areas of WiFi security: monitoring,\n"
- "attacking, testing, and cracking. All tools are command-line driven, which\n"
- "allows for heavy scripting."
- msgstr ""
- #: gnu/packages/networking.scm:2179
- msgid "Offline brute-force tool for Wi-Fi Protected Setup"
- msgstr ""
- #: gnu/packages/networking.scm:2180
- msgid ""
- "Pixiewps implements the pixie-dust attack to brute\n"
- "force the Wi-Fi Protected Setup (WPS) PIN by exploiting the low or\n"
- "non-existing entropy of some access points."
- msgstr ""
- #: gnu/packages/networking.scm:2225
- msgid "Attack tool for Wi-Fi Protected Setup"
- msgstr ""
- #: gnu/packages/networking.scm:2226
- msgid ""
- "Reaver performs a brute force attack against an access\n"
- "point's Wi-Fi Protected Setup (WPS) PIN. Once the PIN is found, the WPA\n"
- "passphrase can be recovered and the AP's wireless settings can be\n"
- "reconfigured."
- msgstr ""
- #: gnu/packages/networking.scm:2249
- msgid "Event loop and event-driven async socket base class"
- msgstr ""
- #: gnu/packages/networking.scm:2251
- msgid ""
- "Danga::Socket is an abstract base class for objects backed by a socket\n"
- "which provides the basic framework for event-driven asynchronous IO, designed\n"
- "to be fast. Danga::Socket is both a base class for objects, and an event\n"
- "loop."
- msgstr ""
- #: gnu/packages/networking.scm:2275
- msgid "IPv4 and IPv6 validation methods"
- msgstr ""
- #: gnu/packages/networking.scm:2277
- msgid ""
- "This module provides several IP address validation subroutines that both\n"
- "validate and untaint their input. This includes both basic validation\n"
- "(@code{is_ipv4()} and @code{is_ipv6()}) and special cases like checking whether\n"
- "an address belongs to a specific network or whether an address is public or\n"
- "private (reserved)."
- msgstr ""
- #: gnu/packages/networking.scm:2304
- msgid "Perl Interface to the Domain Name System"
- msgstr ""
- #: gnu/packages/networking.scm:2305
- msgid "Net::DNS is the Perl Interface to the Domain Name System."
- msgstr ""
- #: gnu/packages/networking.scm:2323
- msgid "Module for DNS service discovery (Apple's Bonjour)"
- msgstr ""
- #: gnu/packages/networking.scm:2324
- msgid ""
- "Net::Bonjour is a set of modules that allow one to\n"
- "discover local services via multicast DNS (mDNS) or enterprise services\n"
- "via traditional DNS. This method of service discovery has been branded\n"
- "as Bonjour by Apple Computer."
- msgstr ""
- #: gnu/packages/networking.scm:2358
- msgid "IPv6 related part of the C socket.h defines and structure manipulators for Perl"
- msgstr ""
- #: gnu/packages/networking.scm:2359
- msgid ""
- "Socket6 binds the IPv6 related part of the C socket header\n"
- "definitions and structure manipulators for Perl."
- msgstr ""
- #: gnu/packages/networking.scm:2385
- msgid "Programmable DNS resolver class for offline emulation of DNS"
- msgstr ""
- #: gnu/packages/networking.scm:2386
- msgid ""
- "Net::DNS::Resolver::Programmable is a programmable DNS resolver for\n"
- "offline emulation of DNS."
- msgstr ""
- #: gnu/packages/networking.scm:2406
- msgid "Mock DNS Resolver object for testing"
- msgstr ""
- #: gnu/packages/networking.scm:2408
- msgid ""
- "Net::DNS::Resolver::Mock is a subclass of Net::DNS::Resolver, but returns\n"
- "static data from any provided DNS zone file instead of querying the network.\n"
- "It is intended primarily for use in testing."
- msgstr ""
- #: gnu/packages/networking.scm:2442
- msgid "Manages IPv4 and IPv6 addresses and subnets"
- msgstr ""
- #: gnu/packages/networking.scm:2443
- msgid "NetAddr::IP manages IPv4 and IPv6 addresses and subsets."
- msgstr ""
- #: gnu/packages/networking.scm:2474
- msgid "Patricia Trie Perl module for fast IP address lookups"
- msgstr ""
- #: gnu/packages/networking.scm:2476
- msgid "Net::Patricia does IP address lookups quickly in Perl."
- msgstr ""
- #: gnu/packages/networking.scm:2496
- msgid "Perl extension for merging IPv4 or IPv6 CIDR addresses"
- msgstr ""
- #: gnu/packages/networking.scm:2497
- msgid "Net::CIDR::Lite merges IPv4 or IPv6 CIDR addresses."
- msgstr ""
- #: gnu/packages/networking.scm:2523
- msgid "Perl object interface for AF_INET/AF_INET6 domain sockets"
- msgstr ""
- #: gnu/packages/networking.scm:2524
- msgid ""
- "IO::Socket::INET6 is an interface for AF_INET/AF_INET6 domain\n"
- "sockets in Perl."
- msgstr ""
- #: gnu/packages/networking.scm:2552
- msgid "Library providing automatic proxy configuration management"
- msgstr ""
- #: gnu/packages/networking.scm:2553
- msgid ""
- "Libproxy handles the details of HTTP/HTTPS proxy\n"
- "configuration for applications across all scenarios. Applications using\n"
- "libproxy only have to specify which proxy to use."
- msgstr ""
- #: gnu/packages/networking.scm:2586
- msgid "Redirect any TCP connection through a proxy or proxy chain"
- msgstr ""
- #: gnu/packages/networking.scm:2587
- msgid ""
- "Proxychains-ng is a preloader which hooks calls to sockets\n"
- "in dynamically linked programs and redirects them through one or more SOCKS or\n"
- "HTTP proxies."
- msgstr ""
- #: gnu/packages/networking.scm:2607
- msgid "Network communication layer on top of UDP"
- msgstr ""
- #: gnu/packages/networking.scm:2609
- msgid ""
- "ENet's purpose is to provide a relatively thin, simple and robust network\n"
- "communication layer on top of UDP. The primary feature it provides is optional\n"
- "reliable, in-order delivery of packets. ENet omits certain higher level\n"
- "networking features such as authentication, server discovery, encryption, or\n"
- "other similar tasks that are particularly application specific so that the\n"
- "library remains flexible, portable, and easily embeddable."
- msgstr ""
- #: gnu/packages/networking.scm:2671
- msgid "Applicative network protocol demultiplexer"
- msgstr ""
- #: gnu/packages/networking.scm:2673
- msgid ""
- "sslh is a network protocol demultiplexer. It acts like a switchboard,\n"
- "accepting connections from clients on one port and forwarding them to different\n"
- "servers based on the contents of the first received data packet. Detection of\n"
- "common protocols like HTTP(S), SSL, SSH, OpenVPN, tinc, and XMPP is already\n"
- "implemented, but any other protocol that matches a regular expression can be\n"
- "added. sslh's name comes from its original application of serving both SSH and\n"
- "HTTPS on port 443, allowing SSH connections from inside corporate firewalls\n"
- "that block port 22."
- msgstr ""
- #: gnu/packages/networking.scm:2701
- msgid "TCP, UDP and SCTP bandwidth measurement tool"
- msgstr ""
- #: gnu/packages/networking.scm:2703
- msgid ""
- "iPerf is a tool to measure achievable bandwidth on IP networks. It\n"
- "supports tuning of various parameters related to timing, buffers and\n"
- "protocols (TCP, UDP, SCTP with IPv4 and IPv6). For each test it reports\n"
- "the bandwidth, loss, and other parameters."
- msgstr ""
- #: gnu/packages/networking.scm:2739
- msgid "Per-process bandwidth monitor"
- msgstr ""
- #: gnu/packages/networking.scm:2740
- msgid ""
- "NetHogs is a small 'net top' tool for Linux. Instead of\n"
- "breaking the traffic down per protocol or per subnet, like most tools do, it\n"
- "groups bandwidth by process.\n"
- "\n"
- "NetHogs does not rely on a special kernel module to be loaded. If there's\n"
- "suddenly a lot of network traffic, you can fire up NetHogs and immediately see\n"
- "which PID is causing this. This makes it easy to identify programs that have\n"
- "gone wild and are suddenly taking up your bandwidth."
- msgstr ""
- #: gnu/packages/networking.scm:2774
- msgid "Usenet binary file downloader"
- msgstr ""
- #: gnu/packages/networking.scm:2776
- msgid ""
- "NZBGet is a binary newsgrabber, which downloads files from Usenet based\n"
- "on information given in @code{nzb} files. NZBGet can be used in standalone\n"
- "and in server/client modes. In standalone mode, you pass NZBGet @command{nzb}\n"
- "files as command-line parameters and it downloads them and exits. NZBGet also\n"
- "contains a Web interface. Its server can be controlled through remote\n"
- "procedure calls (RPCs)."
- msgstr ""
- #: gnu/packages/networking.scm:2863
- msgid "Virtual network switch"
- msgstr ""
- #: gnu/packages/networking.scm:2866
- msgid ""
- "Open vSwitch is a multilayer virtual switch. It is designed to enable\n"
- "massive network automation through programmatic extension, while still\n"
- "supporting standard management interfaces and protocols (e.g. NetFlow, sFlow,\n"
- "IPFIX, RSPAN, CLI, LACP, 802.1ag)."
- msgstr ""
- #: gnu/packages/networking.scm:2890
- msgid "Python class and tools for handling IP addresses and networks"
- msgstr ""
- #: gnu/packages/networking.scm:2891
- msgid ""
- "The @code{IP} class allows a comfortable parsing and\n"
- "handling for most notations in use for IPv4 and IPv6 addresses and\n"
- "networks."
- msgstr ""
- #: gnu/packages/networking.scm:2911
- msgid "Internet bandwidth tester"
- msgstr ""
- #: gnu/packages/networking.scm:2913
- msgid ""
- "Command line interface for testing internet bandwidth using\n"
- "speedtest.net."
- msgstr ""
- #: gnu/packages/networking.scm:2934
- msgid "HPA's tftp client"
- msgstr ""
- #: gnu/packages/networking.scm:2936
- msgid ""
- "This is a tftp client derived from OpenBSD tftp with some extra options\n"
- "added and bugs fixed. The source includes readline support but it is not\n"
- "enabled due to license conflicts between the BSD advertising clause and the GPL."
- msgstr ""
- #: gnu/packages/networking.scm:2987
- msgid "Create secure pipes between sockets"
- msgstr ""
- #: gnu/packages/networking.scm:2988
- msgid ""
- "Spiped (pronounced \"ess-pipe-dee\") is a utility for creating\n"
- "symmetrically encrypted and authenticated pipes between socket addresses, so\n"
- "that one may connect to one address (e.g., a UNIX socket on localhost) and\n"
- "transparently have a connection established to another address (e.g., a UNIX\n"
- "socket on a different system). This is similar to 'ssh -L' functionality, but\n"
- "does not use SSH and requires a pre-shared symmetric key."
- msgstr ""
- #: gnu/packages/networking.scm:3013
- msgid "Routing Software Suite"
- msgstr ""
- #: gnu/packages/networking.scm:3014
- msgid ""
- "Quagga is a routing software suite, providing implementations\n"
- "of OSPFv2, OSPFv3, RIP v1 and v2, RIPng and BGP-4 for Unix platforms.\n"
- "\n"
- "The Quagga architecture consists of a core daemon, @command{zebra}, which\n"
- "acts as an abstraction layer to the underlying Unix kernel and presents the\n"
- "Zserv API over a Unix or TCP stream to Quagga clients. It is these Zserv\n"
- "clients which typically implement a routing protocol and communicate routing\n"
- "updates to the zebra daemon."
- msgstr ""
- #: gnu/packages/networking.scm:3044
- msgid "Generate BGP filters from the @acronym{IRR, Internet Routing Registry}"
- msgstr ""
- #: gnu/packages/networking.scm:3046
- msgid ""
- "This program helps automate the creation and maintenance of @acronym{BGP,\n"
- "Border Gateway Protocol} routing filters used for peering trough Internet\n"
- "exchanges.\n"
- "\n"
- "It generates prefix lists, (extended) access lists, policy-statement terms, and\n"
- "AS paths from data in the @acronym{IRR, Internet Routing Registry}, including\n"
- "the @acronym{RADB, Routing Assets Database} operated by the Merit Network at the\n"
- "University of Michigan.\n"
- "\n"
- "The filters can be aggregated and exported in the most common formats."
- msgstr ""
- #: gnu/packages/networking.scm:3103
- msgid "IPv6 security research toolkit"
- msgstr ""
- #: gnu/packages/networking.scm:3104
- msgid ""
- "The THC IPv6 Toolkit provides command-line tools and a library\n"
- "for researching IPv6 implementations and deployments. It requires Linux 2.6 or\n"
- "newer and only works on Ethernet network interfaces."
- msgstr ""
- #: gnu/packages/networking.scm:3128
- msgid "Bandwidth monitor"
- msgstr ""
- #: gnu/packages/networking.scm:3129
- msgid ""
- "bmon is a monitoring and debugging tool to capture\n"
- "networking-related statistics and prepare them visually in a human-friendly\n"
- "way. It features various output methods including an interactive curses user\n"
- "interface and a programmable text output for scripting."
- msgstr ""
- #: gnu/packages/networking.scm:3170
- msgid "Framework for low-level network packet construction"
- msgstr ""
- #: gnu/packages/networking.scm:3172
- msgid ""
- "Libnet provides a fairly portable framework for network packet\n"
- "construction and injection. It features portable packet creation interfaces\n"
- "at the IP layer and link layer, as well as a host of supplementary\n"
- "functionality. Using libnet, quick and simple packet assembly applications\n"
- "can be whipped up with little effort."
- msgstr ""
- #: gnu/packages/networking.scm:3197
- msgid "Network diagnostic tool"
- msgstr ""
- #: gnu/packages/networking.scm:3199
- msgid ""
- "@acronym{mtr, My TraceRoute} combines the functionality of the\n"
- "@command{traceroute} and @command{ping} programs in a single network diagnostic\n"
- "tool. @command{mtr} can use several network protocols to detect intermediate\n"
- "routers (or @dfn{hops}) between the local host and a user-specified destination.\n"
- "It then continually measures the response time and packet loss at each hop, and\n"
- "displays the results in real time."
- msgstr ""
- #: gnu/packages/networking.scm:3250
- msgid "Peer-to-peer client for the eD2K and Kademlia networks"
- msgstr ""
- #: gnu/packages/networking.scm:3252
- msgid ""
- "aMule is an eMule-like client for the eD2k and Kademlia peer-to-peer\n"
- "file sharing networks. It includes a graphical user interface (GUI), a daemon\n"
- "allowing you to run a client with no graphical interface, and a Web GUI for\n"
- "remote access. The @command{amulecmd} command allows you to control aMule\n"
- "remotely."
- msgstr ""
- #: gnu/packages/networking.scm:3273
- msgid "Framework for proximity-based peer-to-peer applications"
- msgstr ""
- #: gnu/packages/networking.scm:3274
- msgid ""
- "Zyre provides reliable group messaging over local area\n"
- "networks using zeromq. It has these key characteristics:\n"
- "\n"
- "@itemize\n"
- "@item Zyre needs no administration or configuration.\n"
- "@item Peers may join and leave the network at any time.\n"
- "@item Peers talk to each other without any central brokers or servers.\n"
- "@item Peers can talk directly to each other.\n"
- "@item Peers can join groups, and then talk to groups.\n"
- "@item Zyre is reliable, and loses no messages even when the network is heavily loaded.\n"
- "@item Zyre is fast and has low latency, requiring no consensus protocols.\n"
- "@item Zyre is designed for WiFi networks, yet also works well on Ethernet networks.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/networking.scm:3312
- msgid "SocketCAN user-space library"
- msgstr ""
- #: gnu/packages/networking.scm:3313
- msgid ""
- "This library allows controlling basic functions in SocketCAN\n"
- "from user-space. It requires a kernel built with SocketCAN support."
- msgstr ""
- #: gnu/packages/networking.scm:3341
- msgid "CAN utilities"
- msgstr ""
- #: gnu/packages/networking.scm:3342
- msgid ""
- "This package provides CAN utilities in the following areas:\n"
- "\n"
- "@itemize\n"
- "@item Basic tools to display, record, generate and replay CAN traffic\n"
- "@item CAN access via IP sockets\n"
- "@item CAN in-kernel gateway configuration\n"
- "@item CAN bus measurement and testing\n"
- "@item ISO-TP (ISO15765-2:2016 - this means messages with a body larger than\n"
- "eight bytes) tools\n"
- "@item Log file converters\n"
- "@item Serial Line Discipline configuration for slcan driver\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/networking.scm:3377
- msgid "C++ library for ASynchronous network I/O"
- msgstr ""
- #: gnu/packages/networking.scm:3378
- msgid ""
- "Asio is a cross-platform C++ library for network and\n"
- "low-level I/O programming that provides developers with a consistent\n"
- "asynchronous model using a modern C++ approach."
- msgstr ""
- #: gnu/packages/networking.scm:3411
- msgid "Fast tunnel proxy that helps you bypass firewalls"
- msgstr ""
- #: gnu/packages/networking.scm:3413
- msgid ""
- "This package is a fast tunnel proxy that helps you bypass firewalls.\n"
- "\n"
- "Features:\n"
- "@itemize\n"
- "@item TCP & UDP support\n"
- "@item User management API\n"
- "@item TCP Fast Open\n"
- "@item Workers and graceful restart\n"
- "@item Destination IP blacklist\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/networking.scm:3487
- msgid "Simple Network Management Protocol library and tools"
- msgstr ""
- #: gnu/packages/networking.scm:3488
- msgid ""
- "The @dfn{Simple Network Management Protocol} (SNMP) is a\n"
- "widely used protocol for monitoring the health and welfare of network\n"
- "equipment (e.g. routers), computer equipment and even devices like UPSs.\n"
- "Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and\n"
- "SNMP v3 using both IPv4 and IPv6."
- msgstr ""
- #: gnu/packages/networking.scm:3534
- msgid "Bridge for UDP tunnels, Ethernet, TAP and VMnet interfaces"
- msgstr ""
- #: gnu/packages/networking.scm:3535
- msgid ""
- "uBridge is a simple program to create user-land bridges\n"
- "between various technologies. Currently, bridging between UDP tunnels,\n"
- "Ethernet and TAP interfaces is supported. Packet capture is also supported."
- msgstr ""
- #: gnu/packages/networking.scm:3568
- msgid "Capture wlan traffic to hashcat and John the Ripper"
- msgstr ""
- #: gnu/packages/networking.scm:3570
- msgid ""
- "This package contains a small set of tools to capture and convert\n"
- "packets from wireless devices for use with hashcat or John the Ripper."
- msgstr ""
- #: gnu/packages/networking.scm:3599
- msgid "Small tool to capture packets from wlan devices"
- msgstr ""
- #: gnu/packages/networking.scm:3601
- msgid ""
- "Small tool to capture packets from WLAN devices. After capturing,\n"
- "upload the \"uncleaned\" cap to @url{https://wpa-sec.stanev.org/?submit} to\n"
- "see if the access point or the client is vulnerable to a dictionary attack.\n"
- "Convert the cap file to hccapx format and/or to WPA-PMKID-PBKDF2\n"
- "hashline (16800) with @command{hcxpcaptool} from the @code{hcxtools} package\n"
- "and check if the WLAN key or the master key was transmitted unencrypted."
- msgstr ""
- #: gnu/packages/networking.scm:3627
- msgid "SOCKS server and client"
- msgstr ""
- #: gnu/packages/networking.scm:3628
- msgid ""
- "Dante is a SOCKS client and server implementation. It can\n"
- "be installed on a machine with access to an external TCP/IP network and will\n"
- "allow all other machines, without direct access to that network, to be relayed\n"
- "through the machine the Dante server is running on. The external network will\n"
- "never see any machines other than the one Dante is running on."
- msgstr ""
- #: gnu/packages/networking.scm:3674
- msgid "Asynchronous RESTful functionality to C++11 applications"
- msgstr ""
- #: gnu/packages/networking.scm:3675
- msgid ""
- "Restbed is a comprehensive and consistent programming\n"
- "model for building applications that require seamless and secure\n"
- "communication over HTTP."
- msgstr ""
- #: gnu/packages/networking.scm:3726
- msgid "C++14 library that gives you an embedded HTTP/Websocket server"
- msgstr ""
- #: gnu/packages/networking.scm:3727
- msgid ""
- "RESTinio is a header-only C++14 library that gives you an embedded\n"
- "HTTP/Websocket server. It is based on standalone version of ASIO\n"
- "and targeted primarily for asynchronous processing of HTTP-requests."
- msgstr ""
- #: gnu/packages/networking.scm:3829
- msgid "Lightweight Distributed Hash Table (DHT) library"
- msgstr ""
- #: gnu/packages/networking.scm:3830
- msgid ""
- "OpenDHT provides an easy to use distributed in-memory data\n"
- "store. Every node in the network can read and write values to the store.\n"
- "Values are distributed over the network, with redundancy. It includes the\n"
- "following features:\n"
- "@itemize\n"
- "@item Lightweight and scalable, designed for large networks and small devices;\n"
- "@item High resilience to network disruption;\n"
- "@item Public key cryptography layer providing optional data signature and\n"
- "encryption (using GnuTLS);\n"
- "@item IPv4 and IPv6 support;\n"
- "@item Clean and powerful C++14 map API;\n"
- "@item Bindings for C, Rust & Python 3;\n"
- "@item REST API with an optional HTTP client and server with push notification\n"
- "support.\n"
- "@end itemize\n"
- "The following tools are also included:\n"
- "@table @command\n"
- "@item dhtnode\n"
- "A command line tool to run a DHT node and perform operations supported by the\n"
- "library (get, put, etc.) with text values.\n"
- "@item dhtchat\n"
- "A very simple IM client working over the DHT.\n"
- "@end table"
- msgstr ""
- #: gnu/packages/networking.scm:3873
- msgid "IP routing protocol suite"
- msgstr ""
- #: gnu/packages/networking.scm:3874
- msgid ""
- "FRRouting (FRR) is an IP routing protocol suite which includes\n"
- "protocol daemons for BGP, IS-IS, LDP, OSPF, PIM, and RIP."
- msgstr ""
- #: gnu/packages/networking.scm:3903
- msgid "Internet Routing Daemon"
- msgstr ""
- #: gnu/packages/networking.scm:3904
- msgid ""
- "BIRD is an Internet routing daemon with full support for all\n"
- "the major routing protocols. It allows redistribution between protocols with a\n"
- "powerful route filtering syntax and an easy-to-use configuration interface."
- msgstr ""
- #: gnu/packages/networking.scm:3966
- msgid "Internet Wireless Daemon"
- msgstr ""
- #: gnu/packages/networking.scm:3967
- msgid ""
- "iwd is a wireless daemon for Linux that aims to replace WPA\n"
- "Supplicant. It optimizes resource utilization by not depending on any external\n"
- "libraries and instead utilizing features provided by the Linux kernel to the\n"
- "maximum extent possible."
- msgstr ""
- #: gnu/packages/networking.scm:3993
- msgid "YANG data modelling language library"
- msgstr ""
- #: gnu/packages/networking.scm:3994
- msgid ""
- "libyang is a YANG data modelling language parser and toolkit\n"
- "written (and providing API) in C. Current implementation covers YANG 1.0 (RFC\n"
- "6020) as well as YANG 1.1 (RFC 7950)."
- msgstr ""
- #: gnu/packages/networking.scm:4027
- msgid "Management tool for the mesh networking BATMAN protocol"
- msgstr ""
- #: gnu/packages/networking.scm:4028
- msgid ""
- "This package provides a control tool for the\n"
- "B.A.T.M.A.N. mesh networking routing protocol provided by the Linux kernel\n"
- "module @code{batman-adv}, for Layer 2."
- msgstr ""
- #: gnu/packages/networking.scm:4059
- msgid "Make localhost servers publicly visible"
- msgstr ""
- #: gnu/packages/networking.scm:4061
- msgid ""
- "PageKite implements a tunneled reverse proxy which makes it easy to make\n"
- "a service (such as an HTTP or SSH server) on localhost visible to the wider\n"
- "Internet, even behind NAT or restrictive firewalls. A managed front-end relay\n"
- "service is available at @url{https://pagekite.net/}, or you can run your own."
- msgstr ""
- #: gnu/packages/networking.scm:4101
- msgid "Simple IP network calculator"
- msgstr ""
- #: gnu/packages/networking.scm:4102
- msgid ""
- "ipcalc takes an IP address and netmask and calculates the\n"
- "resulting broadcast, network, Cisco wildcard mask, and host range. By giving\n"
- "a second netmask, you can design subnets and supernets. It is also intended\n"
- "to be a teaching tool and presents the subnetting results as\n"
- "easy-to-understand binary values."
- msgstr ""
- #: gnu/packages/networking.scm:4140
- msgid "Utility to set up and maintain TUN/TAP network interfaces"
- msgstr ""
- #: gnu/packages/networking.scm:4141
- msgid ""
- "Tunctl is used to set up and maintain persistent TUN/TAP\n"
- "network interfaces, enabling user applications to simulate network traffic.\n"
- "Such interfaces are useful for VPN software, virtualization, emulation,\n"
- "simulation, and a number of other applications."
- msgstr ""
- #: gnu/packages/networking.scm:4160
- msgid "Implements Wake On LAN functionality in a small program"
- msgstr ""
- #: gnu/packages/networking.scm:4161
- msgid ""
- "Tool to send a magic packet to wake another host on the\n"
- "network. This must be enabled on the target host, usually in the BIOS."
- msgstr ""
- #: gnu/packages/networking.scm:4197
- msgid "Tracks the route taken by packets over an IP network"
- msgstr ""
- #: gnu/packages/networking.scm:4198
- msgid ""
- "This package provides a modern, but Linux-specific\n"
- "implementation of the @command{traceroute} command that can be used to follow\n"
- "the route taken by packets on an IP network on their way to a given host. It\n"
- "utilizes the IP protocol's time to live (TTL) field and attempts to elicit an\n"
- "ICMP TIME_EXCEEDED response from each gateway along the path to the host.\n"
- "Compared to other implementations, this @command{traceroute} command allows\n"
- "some traces for unprivileged users."
- msgstr ""
- #: gnu/packages/networking.scm:4231
- msgid "Virtual Distributed Ethernet"
- msgstr ""
- #: gnu/packages/networking.scm:4232
- msgid ""
- "VDE is a set of programs to provide virtual software-defined\n"
- "Ethernet network interface controllers across multiple virtual or\n"
- "physical, local or remote devices. The VDE architecture provides\n"
- "virtual counterparts to hardware components such as switches and\n"
- "cables."
- msgstr ""
- #: gnu/packages/networking.scm:4273
- msgid "Reliable, high performance TCP/HTTP load balancer"
- msgstr ""
- #: gnu/packages/networking.scm:4274
- msgid ""
- "HAProxy offers @acronym{HA, high availability}, load\n"
- "balancing, and proxying for TCP and HTTP-based applications. It is particularly\n"
- "suited to Web sites crawling under very high loads while needing persistence or\n"
- "Layer 7 processing. Supporting tens of thousands of connections is clearly\n"
- "realistic with today's hardware."
- msgstr ""
- #: gnu/packages/networking.scm:4316
- msgid "Locate neighbors of your network equipment"
- msgstr ""
- #: gnu/packages/networking.scm:4318
- msgid ""
- "The @dfn{Link Layer Discovery Protocol} (LLDP) is an industry standard\n"
- "protocol designed to supplant proprietary Link-Layer protocols such as EDP or\n"
- "CDP. The goal of LLDP is to provide an inter-vendor compatible mechanism to\n"
- "deliver Link-Layer notifications to adjacent network devices. @code{lldpd} is\n"
- "an implementation of LLDP. It also supports some proprietary protocols."
- msgstr ""
- #: gnu/packages/networking.scm:4359
- msgid "Denial-of-service countermeasure"
- msgstr ""
- #: gnu/packages/networking.scm:4360
- msgid ""
- "Hashcash is a proof-of-work algorithm, which has been used\n"
- "as a denial-of-service countermeasure technique in a number of systems.\n"
- "\n"
- "A hashcash stamp constitutes a proof-of-work which takes a parametrizable\n"
- "amount of work to compute for the sender. The recipient can verify received\n"
- "hashcash stamps efficiently.\n"
- "\n"
- "This package contains a command-line tool for computing and verifying hashcash\n"
- "stamps."
- msgstr ""
- #: gnu/packages/networking.scm:4388
- msgid "NBD client and server"
- msgstr ""
- #: gnu/packages/networking.scm:4389
- msgid ""
- "This package provides the NBD (Network Block Devices)\n"
- "client and server. It allows you to use remote block devices over a TCP/IP\n"
- "network."
- msgstr ""
- #: gnu/packages/networking.scm:4454
- msgid "Experiment in scalable routing as an encrypted IPv6 overlay network"
- msgstr ""
- #: gnu/packages/networking.scm:4456
- msgid ""
- "Yggdrasil is an early-stage implementation of a fully end-to-end encrypted\n"
- "IPv6 network. It is lightweight, self-arranging, supported on multiple\n"
- "platforms and allows pretty much any IPv6-capable application to communicate\n"
- "securely with other Yggdrasil nodes. Yggdrasil does not require you to have\n"
- "IPv6 Internet connectivity - it also works over IPv4."
- msgstr ""
- #: gnu/packages/networking.scm:4499
- msgid "Network address discovery tool"
- msgstr ""
- #: gnu/packages/networking.scm:4500
- msgid ""
- "Netdiscover is a network address discovery tool developed\n"
- "mainly for wireless networks without a @acronym{DHCP} server. It also works\n"
- "on hub/switched networks. It is based on @acronym{ARP} packets, it will send\n"
- "@acronym{ARP} requests and sniff for replies."
- msgstr ""
- #: gnu/packages/networking.scm:4535
- msgid "Internet censorship circumvention tool"
- msgstr ""
- #: gnu/packages/networking.scm:4537
- msgid ""
- "Phantomsocks is an Internet censorship circumvention tool based on the\n"
- "desync technique, which was introduced in the 2017 paper\n"
- "@url{https://doi.org/10.1145/3131365.3131374, @cite{Your State is Not Mine: A\n"
- "Closer Look at Evading Stateful Internet Censorship}}.\n"
- "\n"
- "Further information on the usage could be found on the Wikibooks page\n"
- "@url{https://zh.wikibooks.org/wiki/Phantomsocks, @cite{Phantomsocks}}."
- msgstr ""
- #: gnu/packages/networking.scm:4578
- msgid "Graphical @acronym{SSH, Secure SHell} and telnet client"
- msgstr ""
- #: gnu/packages/networking.scm:4579
- msgid ""
- "PuTTY is a graphical text terminal client. It supports\n"
- "@acronym{SSH, Secure SHell}, telnet, and raw socket connections with good\n"
- "terminal emulation. It can authenticate with public keys and Kerberos\n"
- "single-sign-on. It also includes command-line @acronym{SFTP, Secure File\n"
- "Transfer Protocol} and older @acronym{SCP, Secure Copy Protocol}\n"
- "implementations."
- msgstr ""
- #: gnu/packages/networking.scm:4615
- msgid "Network traffic monitoring tool"
- msgstr ""
- #: gnu/packages/networking.scm:4616
- msgid ""
- "vnStat is a console-based network traffic monitor that keeps\n"
- "a log of network traffic for the selected interface(s). It uses the network\n"
- "interface statistics provided by the kernel as information source. This means\n"
- "that vnStat won't actually be sniffing any traffic and also ensures light use\n"
- "of system resources regardless of network traffic rate."
- msgstr ""
- #: gnu/packages/pdf.scm:143
- msgid "Extract page mode and named destinations as PDFmark from PDF"
- msgstr ""
- #: gnu/packages/pdf.scm:145
- msgid ""
- "PDFmarks is a technique that accompanies PDF, and that is used to store\n"
- "metadata such as author or title, but also structural information such as\n"
- "bookmarks or hyperlinks.\n"
- "\n"
- "When Ghostscript reads the main PDF generated by the TeX system with embedded\n"
- "PDF files and outputs the final PDF, the PDF page mode and name targets\n"
- "etc. are not preserved. Therefore, when you open the final PDF, it is not\n"
- "displayed correctly. Also, remote PDF links do not work correctly.\n"
- "\n"
- "This program is able to extract the page mode and named targets as PDFmark\n"
- "from PDF. In this way, you can obtain embedded PDF files that have kept this\n"
- "information."
- msgstr ""
- #: gnu/packages/pdf.scm:191
- msgid "Rearrange PDF pages to print as flyers on one sheet"
- msgstr ""
- #: gnu/packages/pdf.scm:192
- msgid ""
- "@command{flyer-composer} can be used to prepare one- or\n"
- "two-sided flyers for printing on one sheet of paper.\n"
- "\n"
- "Imagine you have designed a flyer in A6 format and want to print it using your\n"
- "A4 printer. Of course, you want to print four flyers on each sheet. This is\n"
- "where Flyer Composer steps in, creating a PDF which holds your flyer four\n"
- "times. If you have a second page, Flyer Composer can arrange it the same way\n"
- "- even if the second page is in a separate PDF file.\n"
- "\n"
- "This package contains both the command line tool and the gui too."
- msgstr ""
- #: gnu/packages/pdf.scm:219
- msgid ""
- "@command{flyer-composer} can be used to prepare one- or\n"
- "two-sided flyers for printing on one sheet of paper.\n"
- "\n"
- "Imagine you have designed a flyer in A6 format and want to print it using your\n"
- "A4 printer. Of course, you want to print four flyers on each sheet. This is\n"
- "where Flyer Composer steps in, creating a PDF which holds your flyer four\n"
- "times. If you have a second page, Flyer Composer can arrange it the same way\n"
- "- even if the second page is in a separate PDF file.\n"
- "\n"
- "This package contains only the command line tool. If you like to use the gui,\n"
- "please install the @code{flyer-composer-gui} package."
- msgstr ""
- #: gnu/packages/pdf.scm:283
- msgid "PDF rendering library"
- msgstr ""
- #: gnu/packages/pdf.scm:285
- msgid "Poppler is a PDF rendering library based on the xpdf-3.0 code base."
- msgstr ""
- #: gnu/packages/pdf.scm:310
- msgid "Poppler encoding files for rendering of CJK and Cyrillic text"
- msgstr ""
- #: gnu/packages/pdf.scm:311
- msgid ""
- "This package provides optional encoding files for Poppler.\n"
- "When present, Poppler is able to correctly render CJK and Cyrillic text."
- msgstr ""
- #: gnu/packages/pdf.scm:344
- msgid "Qt5 frontend for the Poppler PDF rendering library"
- msgstr ""
- #: gnu/packages/pdf.scm:382
- msgid "Python bindings for Poppler-Qt5"
- msgstr ""
- #: gnu/packages/pdf.scm:384
- msgid ""
- "This package provides Python bindings for the Qt5 interface of the\n"
- "Poppler PDF rendering library."
- msgstr ""
- #: gnu/packages/pdf.scm:416
- msgid "Library for generating PDF files"
- msgstr ""
- #: gnu/packages/pdf.scm:418
- msgid ""
- "libHaru is a library for generating PDF files. libHaru does not support\n"
- "reading and editing of existing PDF files."
- msgstr ""
- #: gnu/packages/pdf.scm:436
- msgid "Viewer for PDF files based on the Motif toolkit"
- msgstr ""
- #: gnu/packages/pdf.scm:438
- msgid "Xpdf is a viewer for Portable Document Format (PDF) files."
- msgstr ""
- #: gnu/packages/pdf.scm:471
- msgid "Comic book support for zathura (libarchive backend)"
- msgstr ""
- #: gnu/packages/pdf.scm:472
- msgid ""
- "The zathura-cb plugin adds comic book support to zathura\n"
- "using libarchive."
- msgstr ""
- #: gnu/packages/pdf.scm:505
- msgid "PS support for zathura (libspectre backend)"
- msgstr ""
- #: gnu/packages/pdf.scm:506
- msgid ""
- "The zathura-ps plugin adds PS support to zathura\n"
- "using libspectre."
- msgstr ""
- #: gnu/packages/pdf.scm:540
- msgid "DjVu support for zathura (DjVuLibre backend)"
- msgstr ""
- #: gnu/packages/pdf.scm:541
- msgid ""
- "The zathura-djvu plugin adds DjVu support to zathura\n"
- "using the DjVuLibre library."
- msgstr ""
- #: gnu/packages/pdf.scm:590
- msgid "PDF support for zathura (mupdf backend)"
- msgstr ""
- #: gnu/packages/pdf.scm:591
- msgid ""
- "The zathura-pdf-mupdf plugin adds PDF support to zathura\n"
- "by using the @code{mupdf} rendering library."
- msgstr ""
- #: gnu/packages/pdf.scm:625
- msgid "PDF support for zathura (poppler backend)"
- msgstr ""
- #: gnu/packages/pdf.scm:626
- msgid ""
- "The zathura-pdf-poppler plugin adds PDF support to zathura\n"
- "by using the poppler rendering engine."
- msgstr ""
- #: gnu/packages/pdf.scm:682
- msgid "Lightweight keyboard-driven PDF viewer"
- msgstr ""
- #: gnu/packages/pdf.scm:683
- msgid ""
- "Zathura is a customizable document viewer. It provides a\n"
- "minimalistic interface and an interface that mainly focuses on keyboard\n"
- "interaction."
- msgstr ""
- #: gnu/packages/pdf.scm:723
- msgid "Tools to work with the PDF file format"
- msgstr ""
- #: gnu/packages/pdf.scm:725
- msgid ""
- "PoDoFo is a C++ library and set of command-line tools to work with the\n"
- "PDF file format. It can parse PDF files and load them into memory, and makes\n"
- "it easy to modify them and write the changes to disk. It is primarily useful\n"
- "for applications that wish to do lower level manipulation of PDF, such as\n"
- "extracting content or merging files."
- msgstr ""
- #: gnu/packages/pdf.scm:752
- msgid "Low-level PDF generator"
- msgstr ""
- #: gnu/packages/pdf.scm:753
- msgid ""
- "@code{pydyf} is a low-level PDF generator written in Python\n"
- "and based on PDF specification 1.7."
- msgstr ""
- #: gnu/packages/pdf.scm:829
- msgid "Lightweight PDF viewer and toolkit"
- msgstr ""
- #: gnu/packages/pdf.scm:831
- msgid ""
- "MuPDF is a C library that implements a PDF and XPS parsing and\n"
- "rendering engine. It is used primarily to render pages into bitmaps,\n"
- "but also provides support for other operations such as searching and\n"
- "listing the table of contents and hyperlinks.\n"
- "\n"
- "The library ships with a rudimentary X11 viewer, and a set of command\n"
- "line tools for batch rendering @command{pdfdraw}, rewriting files\n"
- "@command{pdfclean}, and examining the file structure @command{pdfshow}."
- msgstr ""
- #: gnu/packages/pdf.scm:876
- msgid "Command-line tools and library for transforming PDF files"
- msgstr ""
- #: gnu/packages/pdf.scm:878
- msgid ""
- "QPDF is a command-line program that does structural, content-preserving\n"
- "transformations on PDF files. It could have been called something like\n"
- "pdf-to-pdf. It includes support for merging and splitting PDFs and to\n"
- "manipulate the list of pages in a PDF file. It is not a PDF viewer or a\n"
- "program capable of converting PDF into other formats."
- msgstr ""
- #: gnu/packages/pdf.scm:920
- msgid "Tabbed document viewer"
- msgstr ""
- #: gnu/packages/pdf.scm:921
- msgid ""
- "@command{qpdfview} is a document viewer for PDF, PS and DJVU\n"
- "files. It uses the Qt toolkit and features persistent per-file settings,\n"
- "configurable toolbars and shortcuts, continuous and multi‐page layouts,\n"
- "SyncTeX support, and rudimentary support for annotations and forms."
- msgstr ""
- #: gnu/packages/pdf.scm:945
- msgid "Notetaking using a stylus"
- msgstr ""
- #: gnu/packages/pdf.scm:947
- msgid ""
- "Xournal is an application for notetaking, sketching, keeping a journal\n"
- "using a stylus."
- msgstr ""
- #: gnu/packages/pdf.scm:1000
- msgid "Handwriting notetaking software with PDF annotation support"
- msgstr ""
- #: gnu/packages/pdf.scm:1001
- msgid ""
- "Xournal++ is a hand note taking software written in\n"
- "C++ with the target of flexibility, functionality and speed. Stroke\n"
- "recognizer and other parts are based on Xournal code.\n"
- "\n"
- "Xournal++ features:\n"
- "\n"
- "@itemize\n"
- "@item Support for Pen pressure, e.g., Wacom Tablet\n"
- "@item Support for annotating PDFs\n"
- "@item Fill shape functionality\n"
- "@item PDF Export (with and without paper style)\n"
- "@item PNG Export (with and without transparent background)\n"
- "@item Map different tools / colors etc. to stylus buttons /\n"
- "mouse buttons\n"
- "@item Sidebar with Page Previews with advanced page sorting, PDF\n"
- "Bookmarks and Layers (can be individually hidden, editing layer can be\n"
- "selected)\n"
- "@item enhanced support for image insertion\n"
- "@item Eraser with multiple configurations\n"
- "@item LaTeX support\n"
- "@item bug reporting, autosave, and auto backup tools\n"
- "@item Customizeable toolbar, with multiple configurations, e.g., to\n"
- "optimize toolbar for portrait / landscape\n"
- "@item Page Template definitions\n"
- "@item Shape drawing (line, arrow, circle, rectangle)\n"
- "@item Shape resizing and rotation\n"
- "@item Rotation snapping every 45 degrees\n"
- "@item Rect snapping to grid\n"
- "@item Audio recording and playback alongside with handwritten notes\n"
- "@item Multi Language Support, Like English, German, Italian...\n"
- "@item Plugins using LUA Scripting\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/pdf.scm:1079
- msgid "Python library for generating PDFs and graphics"
- msgstr ""
- #: gnu/packages/pdf.scm:1080
- msgid ""
- "This is the ReportLab PDF Toolkit. It allows rapid creation\n"
- "of rich PDF documents, and also creation of charts in a variety of bitmap and\n"
- "vector formats."
- msgstr ""
- #: gnu/packages/pdf.scm:1124
- msgid "PDF presentation tool with visual effects"
- msgstr ""
- #: gnu/packages/pdf.scm:1126
- msgid ""
- "Impressive is a tool to display PDF files that provides visual effects\n"
- "such as smooth alpha-blended slide transitions. It provides additional tools\n"
- "such as zooming, highlighting an area of the screen, and a tool to navigate\n"
- "the PDF pages."
- msgstr ""
- #: gnu/packages/pdf.scm:1147
- msgid "Convert images to PDF via direct JPEG inclusion"
- msgstr ""
- #: gnu/packages/pdf.scm:1149
- msgid ""
- "img2pdf converts images to PDF via direct JPEG inclusion. That\n"
- "conversion is lossless: the image embedded in the PDF has the exact same color\n"
- "information for every pixel as the input."
- msgstr ""
- #: gnu/packages/pdf.scm:1200
- msgid "Framebuffer and drm-based image viewer"
- msgstr ""
- #: gnu/packages/pdf.scm:1202
- msgid ""
- "fbida contains a few applications for viewing and editing images on\n"
- "the framebuffer."
- msgstr ""
- #: gnu/packages/pdf.scm:1230
- msgid "Password recovery tool for PDF files"
- msgstr ""
- #: gnu/packages/pdf.scm:1231
- msgid ""
- "PDFCrack is a simple tool for recovering passwords from PDF\n"
- "documents that use the standard security handler."
- msgstr ""
- #: gnu/packages/pdf.scm:1254
- msgid "PDF to SVG converter"
- msgstr ""
- #: gnu/packages/pdf.scm:1255
- msgid ""
- "@command{pdf2svg} is a simple command-line PDF to SVG\n"
- "converter using the Poppler and Cairo libraries."
- msgstr ""
- #: gnu/packages/pdf.scm:1282
- msgid "Python PDF library"
- msgstr ""
- #: gnu/packages/pdf.scm:1284
- msgid ""
- "This package provides a PDF library capable of splitting, merging,\n"
- "cropping, and transforming PDF files."
- msgstr ""
- #: gnu/packages/pdf.scm:1315
- msgid "Pure Python PDF toolkit"
- msgstr ""
- #: gnu/packages/pdf.scm:1316
- msgid ""
- "PyPDF2 is a pure Python PDF library capable of:\n"
- "\n"
- "@enumerate\n"
- "@item extracting document information (title, author, …)\n"
- "@item splitting documents page by page\n"
- "@item merging documents page by page\n"
- "@item cropping pages\n"
- "@item merging multiple pages into a single page\n"
- "@item encrypting and decrypting PDF files\n"
- "@end enumerate\n"
- "\n"
- "By being pure Python, it should run on any Python platform without any\n"
- "dependencies on external libraries. It can also work entirely on\n"
- "@code{StringIO} objects rather than file streams, allowing for PDF\n"
- "manipulation in memory. It is therefore a useful tool for websites that\n"
- "manage or manipulate PDFs."
- msgstr ""
- #: gnu/packages/pdf.scm:1370
- msgid "Merge, split and re-arrange pages from PDF documents"
- msgstr ""
- #: gnu/packages/pdf.scm:1372
- msgid ""
- "PDF Arranger is a small application which allows one to merge or split\n"
- "PDF documents and rotate, crop and rearrange their pages using an interactive\n"
- "and intuitive graphical interface.\n"
- "\n"
- "PDF Arranger was formerly known as PDF-Shuffler."
- msgstr ""
- #: gnu/packages/pdf.scm:1395
- msgid "Scale and tile PDF images/pages to print on multiple pages"
- msgstr ""
- #: gnu/packages/pdf.scm:1396
- msgid ""
- "@command{pdfposter} can be used to create a large poster by\n"
- "building it from multiple pages and/or printing it on large media. It expects\n"
- "as input a PDF file, normally printing on a single page. The output is again\n"
- "a PDF file, maybe containing multiple pages together building the poster. The\n"
- "input page will be scaled to obtain the desired size.\n"
- "\n"
- "This is much like @command{poster} does for Postscript files, but working with\n"
- "PDF. Since sometimes @command{poster} does not like your files converted from\n"
- "PDF. Indeed @command{pdfposter} was inspired by @command{poster}."
- msgstr ""
- #: gnu/packages/pdf.scm:1425
- msgid "Command-line utility to search text in PDF files"
- msgstr ""
- #: gnu/packages/pdf.scm:1427
- msgid ""
- "Pdfgrep searches in pdf files for strings matching a regular expression.\n"
- "Support some GNU grep options as file name output, page number output,\n"
- "optional case insensitivity, count occurrences, color highlights and search in\n"
- "multiple files."
- msgstr ""
- #: gnu/packages/pdf.scm:1473
- msgid "Presenter console with multi-monitor support for PDF files"
- msgstr ""
- #: gnu/packages/pdf.scm:1475
- msgid ""
- "pdfpc is a presentation viewer application which uses multi-monitor\n"
- "output to provide meta information to the speaker during the presentation. It\n"
- "is able to show a normal presentation window on one screen, while showing a\n"
- "more sophisticated overview on the other one providing information like a\n"
- "picture of the next slide, as well as the left over time till the end of the\n"
- "presentation. The input files processed by pdfpc are PDF documents."
- msgstr ""
- #: gnu/packages/pdf.scm:1500
- msgid "Pango to PostScript converter"
- msgstr ""
- #: gnu/packages/pdf.scm:1502
- msgid ""
- "Paps reads a UTF-8 encoded file and generates a PostScript language\n"
- "rendering of the file through the Pango Cairo back end."
- msgstr ""
- #: gnu/packages/pdf.scm:1531
- msgid "PDF manipulation tool"
- msgstr ""
- #: gnu/packages/pdf.scm:1532
- msgid ""
- "Stapler is a pure Python alternative to PDFtk, a tool for\n"
- "manipulating PDF documents from the command line. It supports\n"
- "\n"
- "@itemize\n"
- "@item cherry-picking pages and concatenating them into a new file\n"
- "@item splitting a PDF document into single pages each in its own file\n"
- "@item merging PDF documents with their pages interleaved\n"
- "@item displaying metadata in a PDF document\n"
- "@item displaying the mapping between logical and physical page numbers\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/pdf.scm:1604
- msgid "Document factory for creating PDF files from HTML"
- msgstr ""
- #: gnu/packages/pdf.scm:1605
- msgid ""
- "WeasyPrint helps web developers to create PDF documents. It\n"
- "turns simple HTML pages into gorgeous statistical reports, invoices, tickets,\n"
- "etc.\n"
- "\n"
- "From a technical point of view, WeasyPrint is a visual rendering engine for\n"
- "HTML and CSS that can export to PDF and PNG. It aims to support web standards\n"
- "for printing.\n"
- "\n"
- "It is based on various libraries but not on a full rendering engine like\n"
- "WebKit or Gecko. The CSS layout engine is written in Python, designed for\n"
- "pagination, and meant to be easy to hack on. Weasyprint can also be used as a\n"
- "python library.\n"
- "\n"
- "Keywords: html2pdf, htmltopdf"
- msgstr ""
- #: gnu/packages/pem.scm:41
- msgid "Personal expenses manager"
- msgstr ""
- #: gnu/packages/pem.scm:43
- msgid ""
- "GNU Pem is a simple tool for tracking personal income and\n"
- "expenses. It operates from the command line and it stores its data\n"
- "in a basic text format in your home directory. It can easily print\n"
- "reports of your spending on different expenses via a basic search\n"
- "feature."
- msgstr ""
- #: gnu/packages/perl.scm:261 gnu/packages/perl.scm:334
- msgid "Implementation of the Perl programming language"
- msgstr ""
- #: gnu/packages/perl.scm:263 gnu/packages/perl.scm:336
- msgid ""
- "Perl is a general-purpose programming language originally developed for\n"
- "text manipulation and now used for a wide range of tasks including system\n"
- "administration, web development, network programming, GUI development, and\n"
- "more."
- msgstr ""
- #: gnu/packages/perl.scm:423
- msgid "Module for merging hierarchies using the C3 algorithm"
- msgstr ""
- #: gnu/packages/perl.scm:424
- msgid ""
- "This module implements the C3 algorithm, which aims to\n"
- "provide a sane method resolution order under multiple inheritance."
- msgstr ""
- #: gnu/packages/perl.scm:442
- msgid "Compute differences between two files or lists"
- msgstr ""
- #: gnu/packages/perl.scm:443
- msgid ""
- "This is a module for computing the difference between two\n"
- "files, two strings, or any other two lists of things. It uses an intelligent\n"
- "algorithm similar to (or identical to) the one used by the Unix \"diff\"\n"
- "program. It is guaranteed to find the *smallest possible* set of\n"
- "differences."
- msgstr ""
- #: gnu/packages/perl.scm:465
- msgid "Use shorter versions of class names"
- msgstr ""
- #: gnu/packages/perl.scm:466
- msgid ""
- "The alias module loads the class you specify and exports\n"
- "into your namespace a subroutine that returns the class name. You can\n"
- "explicitly alias the class to another name or, if you prefer, you can do so\n"
- "implicitly."
- msgstr ""
- #: gnu/packages/perl.scm:521
- msgid "Get, build and use SDL libraries"
- msgstr ""
- #: gnu/packages/perl.scm:523
- msgid ""
- "Alien::SDL can be used to detect and get configuration settings from an\n"
- "installed SDL and related libraries. Based on your platform it offers the\n"
- "possibility to download and install prebuilt binaries or to build SDL & co.@:\n"
- "from source codes."
- msgstr ""
- #: gnu/packages/perl.scm:544
- msgid "Transparently use Moose or Mouse modules"
- msgstr ""
- #: gnu/packages/perl.scm:546
- msgid ""
- "This module facilitates using @code{Moose} or @code{Mouse} modules\n"
- "without changing the code. By default, Mouse will be provided to libraries,\n"
- "unless Moose is already loaded, or explicitly requested by the end-user. End\n"
- "users can force the decision of which backend to use by setting the environment\n"
- "variable ANY_MOOSE to be Moose or Mouse."
- msgstr ""
- #: gnu/packages/perl.scm:590
- msgid "Translate DocBook/XML documentation into other file formats"
- msgstr ""
- #: gnu/packages/perl.scm:592
- msgid ""
- "This package provides the @command{docmake} command-line tool, and the\n"
- "@code{App::XML::DocBook::Docmake} and @code{App::XML::DocBook::Builder} Perl\n"
- "modules.\n"
- "\n"
- "It translates DocBook/XML mark-up into various other documentation formats such\n"
- "as XHTML, RTF, PDF, and XSL-FO, using the more low-level tools. It aims to be a\n"
- "replacement for @command{xmlto}."
- msgstr ""
- #: gnu/packages/perl.scm:617
- msgid "Configuration files and command line parsing"
- msgstr ""
- #: gnu/packages/perl.scm:618
- msgid ""
- "AppConfig is a bundle of Perl5 modules for reading\n"
- "configuration files and parsing command line arguments."
- msgstr ""
- #: gnu/packages/perl.scm:638
- msgid "Small utils for array manipulation"
- msgstr ""
- #: gnu/packages/perl.scm:639
- msgid ""
- "@code{Array::Utils} is a small pure-perl module containing\n"
- "list manipulation routines."
- msgstr ""
- #: gnu/packages/perl.scm:660
- msgid "Allow C/XS libraries to interrupt perl asynchronously"
- msgstr ""
- #: gnu/packages/perl.scm:662
- msgid ""
- "@code{Async::Interrupt} implements a single feature only of interest\n"
- "to advanced perl modules, namely asynchronous interruptions (think \"UNIX\n"
- "signals\", which are very similar).\n"
- "\n"
- "Sometimes, modules wish to run code asynchronously (in another thread,\n"
- "or from a signal handler), and then signal the perl interpreter on\n"
- "certain events. One common way is to write some data to a pipe and use\n"
- "an event handling toolkit to watch for I/O events. Another way is to\n"
- "send a signal. Those methods are slow, and in the case of a pipe, also\n"
- "not asynchronous - it won't interrupt a running perl interpreter.\n"
- "\n"
- "This module implements asynchronous notifications that enable you to\n"
- "signal running perl code from another thread, asynchronously, and\n"
- "sometimes even without using a single syscall."
- msgstr ""
- #: gnu/packages/perl.scm:692
- msgid "Assorted general utility attributes"
- msgstr ""
- #: gnu/packages/perl.scm:693
- msgid ""
- "This package provides various utility functions. When used\n"
- "without argument, this module provides four universally accessible attributes\n"
- "of general interest as follows:\n"
- "@itemize\n"
- "@item Abstract\n"
- "@item Alias\n"
- "@item Memoize\n"
- "@item Method\n"
- "@item SigHandler\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/perl.scm:724
- msgid "DEC VMS password hashing"
- msgstr ""
- #: gnu/packages/perl.scm:725
- msgid ""
- "@code{Authen::DecHpwd} implements the\n"
- "SYS$HASH_PASSWORD password hashing function from VMS (also known as\n"
- "LGI$HPWD) and some associated VMS username and password handling\n"
- "functions. The password hashing function is implemented in XS with a\n"
- "pure Perl backup version for systems that cannot handle XS."
- msgstr ""
- #: gnu/packages/perl.scm:760
- msgid "Hashed passwords/passphrases as objects"
- msgstr ""
- #: gnu/packages/perl.scm:761
- msgid ""
- "@code{Authen-Passphrase} is the base class for a\n"
- "system of objects that encapsulate passphrases. An object of this\n"
- "type is a passphrase recogniser; its job is to recognise whether an\n"
- "offered passphrase is the right one. For security such passphrase\n"
- "recognisers usually do not themselves know the passphrase they are\n"
- "looking for; they can merely recognise it when they see it. There are\n"
- "many schemes in use to achieve this effect and the intent of this\n"
- "class is to provide a consistent interface to them all. In addition\n"
- "to the base class, this module also contains implementations of\n"
- "several specific passphrase schemes."
- msgstr ""
- #: gnu/packages/perl.scm:787
- msgid "Lexically disable autovivification"
- msgstr ""
- #: gnu/packages/perl.scm:788
- msgid ""
- "When an undefined variable is dereferenced, it gets silently\n"
- "upgraded to an array or hash reference (depending of the type of the\n"
- "dereferencing). This behaviour is called autovivification and usually does\n"
- "what you mean but it may be unnatural or surprising because your variables get\n"
- "populated behind your back. This is especially true when several levels of\n"
- "dereferencing are involved, in which case all levels are vivified up to the\n"
- "last, or when it happens in intuitively read-only constructs like\n"
- "@code{exists}. The pragma provided by this package lets you disable\n"
- "autovivification for some constructs and optionally throws a warning or an\n"
- "error when it would have happened."
- msgstr ""
- #: gnu/packages/perl.scm:819
- msgid "Disables bareword filehandles"
- msgstr ""
- #: gnu/packages/perl.scm:820
- msgid "This module disables bareword filehandles."
- msgstr ""
- #: gnu/packages/perl.scm:840
- msgid "Open a browser in a given URL"
- msgstr ""
- #: gnu/packages/perl.scm:841
- msgid ""
- "The functions exported by this module allow you to open URLs\n"
- "in the user's browser. A set of known commands per OS-name is tested for\n"
- "presence, and the first one found is executed. With an optional parameter,\n"
- "all known commands are checked."
- msgstr ""
- #: gnu/packages/perl.scm:861
- msgid "BSD process resource limit and priority functions"
- msgstr ""
- #: gnu/packages/perl.scm:862
- msgid ""
- "This package provides procedures to get and set resource\n"
- "limits like @code{getrlimit} and @code{setpriority}."
- msgstr ""
- #: gnu/packages/perl.scm:883
- msgid "Execute code after a scope finished compilation"
- msgstr ""
- #: gnu/packages/perl.scm:884
- msgid ""
- "This module allows you to execute code when perl finished\n"
- "compiling the surrounding scope."
- msgstr ""
- #: gnu/packages/perl.scm:905
- msgid "Wrap OP check callbacks"
- msgstr ""
- #: gnu/packages/perl.scm:906
- msgid "This module allows you to wrap OP check callbacks."
- msgstr ""
- #: gnu/packages/perl.scm:922
- msgid "Lists of reserved barewords and symbol names"
- msgstr ""
- #: gnu/packages/perl.scm:923
- msgid ""
- "@code{B::Keywords} supplies several arrays of exportable\n"
- "keywords: @code{@@Scalars, @@Arrays, @@Hashes, @@Filehandles, @@Symbols,\n"
- "@@Functions, @@Barewords, @@TieIOMethods, @@UNIVERSALMethods and\n"
- "@@ExporterSymbols}."
- msgstr ""
- #: gnu/packages/perl.scm:946
- msgid "Benchmarking with statistical confidence"
- msgstr ""
- #: gnu/packages/perl.scm:948
- msgid ""
- "The Benchmark::Timer class allows you to time portions of code\n"
- "conveniently, as well as benchmark code by allowing timings of repeated\n"
- "trials. It is perfect for when you need more precise information about the\n"
- "running time of portions of your code than the Benchmark module will give you,\n"
- "but don't want to go all out and profile your code."
- msgstr ""
- #: gnu/packages/perl.scm:972
- msgid "Bit vector library"
- msgstr ""
- #: gnu/packages/perl.scm:973
- msgid ""
- "Bit::Vector is an efficient C library which allows you to\n"
- "handle bit vectors, sets (of integers), \"big integer arithmetic\" and boolean\n"
- "matrices, all of arbitrary sizes. The package also includes an\n"
- "object-oriented Perl module for accessing the C library from Perl, and\n"
- "optionally features overloaded operators for maximum ease of use. The C\n"
- "library can nevertheless be used stand-alone, without Perl."
- msgstr ""
- #: gnu/packages/perl.scm:994
- msgid "Boolean support for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:995
- msgid ""
- "This module provides basic Boolean support, by defining two\n"
- "special objects: true and false."
- msgstr ""
- #: gnu/packages/perl.scm:1013
- msgid "Data files for Business::ISBN"
- msgstr ""
- #: gnu/packages/perl.scm:1014
- msgid ""
- "This package provides a data pack for @code{Business::ISBN}.\n"
- "These data are generated from the RangeMessage.xml file provided by the ISBN\n"
- "Agency."
- msgstr ""
- #: gnu/packages/perl.scm:1035
- msgid "Work with International Standard Book Numbers"
- msgstr ""
- #: gnu/packages/perl.scm:1036
- msgid ""
- "This module provides tools to deal with International\n"
- "Standard Book Numbers, including ISBN-10 and ISBN-13."
- msgstr ""
- #: gnu/packages/perl.scm:1054
- msgid "Work with International Standard Serial Numbers"
- msgstr ""
- #: gnu/packages/perl.scm:1055
- msgid ""
- "This module provides tools to deal with International\n"
- "Standard Serial Numbers."
- msgstr ""
- #: gnu/packages/perl.scm:1074
- msgid "Work with International Standard Music Numbers"
- msgstr ""
- #: gnu/packages/perl.scm:1075
- msgid ""
- "This module provides tools to deal with International\n"
- "Standard Music Numbers."
- msgstr ""
- #: gnu/packages/perl.scm:1094
- msgid "Cache interface for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:1095
- msgid ""
- "The Cache modules are designed to assist a developer in\n"
- "persisting data for a specified period of time. Often these modules are used\n"
- "in web applications to store data locally to save repeated and redundant\n"
- "expensive calls to remote machines or databases. People have also been known\n"
- "to use Cache::Cache for its straightforward interface in sharing data between\n"
- "runs of an application or invocations of a CGI-style script or simply as an\n"
- "easy to use abstraction of the file system or shared memory."
- msgstr ""
- #: gnu/packages/perl.scm:1117
- msgid "Shared memory interprocess cache via mmap"
- msgstr ""
- #: gnu/packages/perl.scm:1118
- msgid ""
- "A shared memory cache through an mmap'ed file. It's core is\n"
- "written in C for performance. It uses fcntl locking to ensure multiple\n"
- "processes can safely access the cache at the same time. It uses a basic LRU\n"
- "algorithm to keep the most used entries in the cache."
- msgstr ""
- #: gnu/packages/perl.scm:1139
- msgid "Capture STDOUT and STDERR from Perl, XS or external programs"
- msgstr ""
- #: gnu/packages/perl.scm:1141
- msgid ""
- "Capture::Tiny provides a simple, portable way to capture almost anything\n"
- "sent to STDOUT or STDERR, regardless of whether it comes from Perl, from XS\n"
- "code or from an external program. Optionally, output can be teed so that it\n"
- "is captured while being passed through to the original file handles."
- msgstr ""
- #: gnu/packages/perl.scm:1160
- msgid "Check compatibility with the installed perl version"
- msgstr ""
- #: gnu/packages/perl.scm:1162
- msgid ""
- "This module is used by Schmorp's modules during configuration stage\n"
- "to test the installed perl for compatibility with his modules."
- msgstr ""
- #: gnu/packages/perl.scm:1180
- msgid "Alternative warn and die for modules"
- msgstr ""
- #: gnu/packages/perl.scm:1181
- msgid ""
- "The @code{Carp} routines are useful in your own modules\n"
- "because they act like @code{die()} or @code{warn()}, but with a message\n"
- "which is more likely to be useful to a user of your module. In the case\n"
- "of @code{cluck}, @code{confess}, and @code{longmess} that context is a\n"
- "summary of every call in the call-stack. For a shorter message you can use\n"
- "@code{carp} or @code{croak} which report the error as being from where your\n"
- "module was called. There is no guarantee that that is where the error was,\n"
- "but it is a good educated guess."
- msgstr ""
- #: gnu/packages/perl.scm:1206
- msgid "Warns and dies noisily with stack backtraces/"
- msgstr ""
- #: gnu/packages/perl.scm:1207
- msgid ""
- "This module is meant as a debugging aid. It can be used to\n"
- "make a script complain loudly with stack backtraces when @code{warn()}-ing or\n"
- "@code{die()}ing."
- msgstr ""
- #: gnu/packages/perl.scm:1226
- msgid "Executable comments for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:1227
- msgid ""
- "Carp::Assert is intended for a purpose like the ANSI C\n"
- "library assert.h."
- msgstr ""
- #: gnu/packages/perl.scm:1248
- msgid "Convenience wrappers around Carp::Assert"
- msgstr ""
- #: gnu/packages/perl.scm:1249
- msgid ""
- "Carp::Assert::More is a set of handy assertion functions for\n"
- "Perl."
- msgstr ""
- #: gnu/packages/perl.scm:1268
- msgid "Report errors from a \"clan\" of modules"
- msgstr ""
- #: gnu/packages/perl.scm:1269
- msgid ""
- "This module allows errors from a clan (or family) of modules\n"
- "to appear to originate from the caller of the clan. This is necessary in\n"
- "cases where the clan modules are not classes derived from each other, and thus\n"
- "the Carp.pm module doesn't help."
- msgstr ""
- #: gnu/packages/perl.scm:1289
- msgid "Read the CDDB entry for an audio CD in your drive"
- msgstr ""
- #: gnu/packages/perl.scm:1290
- msgid "This module can retrieve information from the CDDB."
- msgstr ""
- #: gnu/packages/perl.scm:1383
- msgid "Generation of circularly composited renditions"
- msgstr ""
- #: gnu/packages/perl.scm:1385
- msgid ""
- "Circos is a program for the generation of publication-quality, circularly\n"
- "composited renditions of genomic data and related annotations."
- msgstr ""
- #: gnu/packages/perl.scm:1405
- msgid "Automated accessor generation"
- msgstr ""
- #: gnu/packages/perl.scm:1406
- msgid ""
- "This module automagically generates accessors/mutators for\n"
- "your class."
- msgstr ""
- #: gnu/packages/perl.scm:1428
- msgid "Faster, but less expandable, chained accessors"
- msgstr ""
- #: gnu/packages/perl.scm:1429
- msgid ""
- "A chained accessor is one that always returns the object\n"
- "when called with parameters (to set), and the value of the field when called\n"
- "with no arguments. This module subclasses Class::Accessor in order to provide\n"
- "the same mk_accessors interface."
- msgstr ""
- #: gnu/packages/perl.scm:1452
- msgid "Build groups of accessors"
- msgstr ""
- #: gnu/packages/perl.scm:1453
- msgid ""
- "This class lets you build groups of accessors that will call\n"
- "different getters and setters."
- msgstr ""
- #: gnu/packages/perl.scm:1472
- msgid "Pragma to use the C3 method resolution order algorithm"
- msgstr ""
- #: gnu/packages/perl.scm:1473
- msgid ""
- "This is pragma to change Perl 5's standard method resolution\n"
- "order from depth-first left-to-right (a.k.a - pre-order) to the more\n"
- "sophisticated C3 method resolution order."
- msgstr ""
- #: gnu/packages/perl.scm:1495
- msgid "Drop-in replacement for NEXT"
- msgstr ""
- #: gnu/packages/perl.scm:1496
- msgid ""
- "This module is intended as a drop-in replacement for NEXT,\n"
- "supporting the same interface, but using Class::C3 to do the hard work."
- msgstr ""
- #: gnu/packages/perl.scm:1517
- msgid "Load mix-ins or components to your C3-based class"
- msgstr ""
- #: gnu/packages/perl.scm:1518
- msgid ""
- "This module will inject base classes to your module using\n"
- "the Class::C3 method resolution order."
- msgstr ""
- #: gnu/packages/perl.scm:1536
- msgid "Inheritable, overridable class data"
- msgstr ""
- #: gnu/packages/perl.scm:1537
- msgid ""
- "Class::Data::Inheritable is for creating accessor/mutators\n"
- "to class data. That is, if you want to store something about your class as a\n"
- "whole (instead of about a single object). This data is then inherited by your\n"
- "subclasses and can be overridden."
- msgstr ""
- #: gnu/packages/perl.scm:1557
- msgid "Class for easy date and time manipulation"
- msgstr ""
- #: gnu/packages/perl.scm:1558
- msgid ""
- "This module provides a general-purpose date and datetime\n"
- "type for perl."
- msgstr ""
- #: gnu/packages/perl.scm:1575
- msgid "Base class for error handling"
- msgstr ""
- #: gnu/packages/perl.scm:1577
- msgid ""
- "@code{Class::ErrorHandler} provides an error-handling mechanism that is generic\n"
- "enough to be used as the base class for a variety of OO classes. Subclasses inherit\n"
- "its two error-handling methods, error and errstr, to communicate error messages back\n"
- "to the calling program."
- msgstr ""
- #: gnu/packages/perl.scm:1598
- msgid "Utility methods for factory classes"
- msgstr ""
- #: gnu/packages/perl.scm:1599
- msgid "This module exports methods useful for factory classes."
- msgstr ""
- #: gnu/packages/perl.scm:1616
- msgid "Get information about a class and its structure"
- msgstr ""
- #: gnu/packages/perl.scm:1617
- msgid ""
- "Class::Inspector allows you to get information about a\n"
- "loaded class."
- msgstr ""
- #: gnu/packages/perl.scm:1640
- msgid "Working (require \"Class::Name\") and more"
- msgstr ""
- #: gnu/packages/perl.scm:1641
- msgid ""
- "\"require EXPR\" only accepts Class/Name.pm style module\n"
- "names, not Class::Name. For that, this module provides \"load_class\n"
- "'Class::Name'\"."
- msgstr ""
- #: gnu/packages/perl.scm:1663
- msgid "XS implementation of parts of Class::Load"
- msgstr ""
- #: gnu/packages/perl.scm:1664
- msgid ""
- "This module provides an XS implementation for portions of\n"
- "Class::Load."
- msgstr ""
- #: gnu/packages/perl.scm:1685
- msgid "Create generic methods for OO Perl"
- msgstr ""
- #: gnu/packages/perl.scm:1686
- msgid ""
- "This module solves the problem of having to continually\n"
- "write accessor methods for your objects that perform standard tasks."
- msgstr ""
- #: gnu/packages/perl.scm:1705
- msgid "Moose-like method modifiers"
- msgstr ""
- #: gnu/packages/perl.scm:1706
- msgid ""
- "Class::Method::Modifiers provides three modifiers:\n"
- "@code{before}, @code{around}, and @code{after}. @code{before} and @code{after}\n"
- "are run just before and after the method they modify, but can not really affect\n"
- "that original method. @code{around} is run in place of the original method,\n"
- "with a hook to easily call that original method."
- msgstr ""
- #: gnu/packages/perl.scm:1732
- msgid "Dynamic class mixing"
- msgstr ""
- #: gnu/packages/perl.scm:1733
- msgid ""
- "The @code{mix_class} function provided by this\n"
- "module dynamically generates anonymous classes with specified\n"
- "inheritance. This is useful where an incomplete class requires use of\n"
- "a mixin in order to become instantiable."
- msgstr ""
- #: gnu/packages/perl.scm:1753
- msgid "Implementation of a singleton class for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:1754
- msgid ""
- "This module implements a Singleton class from which other\n"
- "classes can be derived. By itself, the Class::Singleton module does very\n"
- "little other than manage the instantiation of a single object."
- msgstr ""
- #: gnu/packages/perl.scm:1773
- msgid "Minimalist class construction"
- msgstr ""
- #: gnu/packages/perl.scm:1774
- msgid ""
- "This module offers a minimalist class construction kit. It\n"
- "uses no non-core modules for any recent Perl."
- msgstr ""
- #: gnu/packages/perl.scm:1795
- msgid "Unload a class"
- msgstr ""
- #: gnu/packages/perl.scm:1796
- msgid ""
- "Class:Unload unloads a given class by clearing out its\n"
- "symbol table and removing it from %INC."
- msgstr ""
- #: gnu/packages/perl.scm:1814
- msgid "Generate fast XS accessors without runtime compilation"
- msgstr ""
- #: gnu/packages/perl.scm:1815
- msgid ""
- "Class::XSAccessor implements fast read, write, and\n"
- "read/write accessors in XS. Additionally, it can provide predicates such as\n"
- "\"has_foo()\" for testing whether the attribute \"foo\" is defined in the\n"
- "object. It only works with objects that are implemented as ordinary hashes.\n"
- "Class::XSAccessor::Array implements the same interface for objects that use\n"
- "arrays for their internal representation."
- msgstr ""
- #: gnu/packages/perl.scm:1835 gnu/packages/perl.scm:1880
- msgid "Recursively copy Perl datatypes"
- msgstr ""
- #: gnu/packages/perl.scm:1837
- msgid ""
- "This module provides a clone() method which makes recursive copies of\n"
- "nested hash, array, scalar and reference types, including tied variables and\n"
- "objects."
- msgstr ""
- #: gnu/packages/perl.scm:1861
- msgid "Choose appropriate Perl @code{clone} utility"
- msgstr ""
- #: gnu/packages/perl.scm:1862
- msgid ""
- "This @code{Clone::Choose} module checks several different\n"
- "modules which provide a @code{clone()} function and selects an appropriate\n"
- "one."
- msgstr ""
- #: gnu/packages/perl.scm:1881
- msgid ""
- "This module provides a general-purpose @code{clone} function\n"
- "to make deep copies of Perl data structures. It calls itself recursively to\n"
- "copy nested hash, array, scalar and reference types, including tied variables\n"
- "and objects."
- msgstr ""
- #: gnu/packages/perl.scm:1901
- msgid "Sane defaults for Perl programs"
- msgstr ""
- #: gnu/packages/perl.scm:1902
- msgid ""
- "This module implements some sane defaults for Perl programs,\n"
- "as defined by two typical specimens of Perl coders."
- msgstr ""
- #: gnu/packages/perl.scm:1924
- msgid "Perl extension for libconfig"
- msgstr ""
- #: gnu/packages/perl.scm:1926
- msgid ""
- "Conf::Libconfig is a Perl interface to the libconfig configuration file\n"
- "library. It support scalar, array, and hash data structures just like its C/C++\n"
- "counterpart. It reduces the effort required to implement a configuration file\n"
- "parser in your Perl programme and allows sharing configuration files between\n"
- "languages."
- msgstr ""
- #: gnu/packages/perl.scm:1946
- msgid "Grammar-based config parser"
- msgstr ""
- #: gnu/packages/perl.scm:1948
- msgid ""
- "Config::Grammar is a module to parse configuration files. The\n"
- "configuration may consist of multiple-level sections with assignments and\n"
- "tabular data."
- msgstr ""
- #: gnu/packages/perl.scm:1969
- msgid "Load configuration from different file formats"
- msgstr ""
- #: gnu/packages/perl.scm:1970
- msgid ""
- "Config::Any provides a facility for Perl applications and\n"
- "libraries to load configuration data from multiple different file formats. It\n"
- "supports XML, YAML, JSON, Apache-style configuration, and Perl code."
- msgstr ""
- #: gnu/packages/perl.scm:1990
- msgid "Package for configuration files outside your Perl script"
- msgstr ""
- #: gnu/packages/perl.scm:1991
- msgid ""
- "This package provides a way to have readable configuration\n"
- "files outside your Perl script. Configurations can be imported, sections\n"
- "can be grouped, and settings can be accessed from a tied hash."
- msgstr ""
- #: gnu/packages/perl.scm:2012
- msgid "Module to implement some AutoConf macros in Perl"
- msgstr ""
- #: gnu/packages/perl.scm:2013
- msgid ""
- "Config::AutoConf is intended to provide the same\n"
- "opportunities to Perl developers as GNU Autoconf does for Shell developers."
- msgstr ""
- #: gnu/packages/perl.scm:2030
- msgid "Generic Config Module"
- msgstr ""
- #: gnu/packages/perl.scm:2031
- msgid ""
- "This module opens a config file and parses its contents for\n"
- "you. The format of config files supported by Config::General is inspired by\n"
- "the well known Apache config format and is 100% compatible with Apache\n"
- "configs, but you can also just use simple name/value pairs in your config\n"
- "files. In addition to the capabilities of an Apache config file it supports\n"
- "some enhancements such as here-documents, C-style comments, and multiline\n"
- "options."
- msgstr ""
- #: gnu/packages/perl.scm:2060
- msgid "Parse Git style configuration files"
- msgstr ""
- #: gnu/packages/perl.scm:2062
- msgid ""
- "This module handles parsing, modifying and creating configuration files\n"
- "of the style used by the Git version control system."
- msgstr ""
- #: gnu/packages/perl.scm:2082
- msgid "Simple .ini-file format reader and writer"
- msgstr ""
- #: gnu/packages/perl.scm:2083
- msgid ""
- "@code{Config::INI} is a module that facilates the reading\n"
- "and writing of @code{.ini}-style configuration files."
- msgstr ""
- #: gnu/packages/perl.scm:2102
- msgid "Read/Write .ini style files with as little code as possible"
- msgstr ""
- #: gnu/packages/perl.scm:2104
- msgid ""
- "@code{Config::Tiny} is a Perl class to read and write .ini\n"
- "style configuration files with as little code as possible, reducing load time\n"
- "and memory overhead.\n"
- "\n"
- "This module is primarily for reading human written files, and anything we write\n"
- "shouldn't need to have documentation/comments. If you need something with more\n"
- "power move up to @code{Config::Simple}, @code{Config::General} or one of the\n"
- "many other @code{Config::*} modules."
- msgstr ""
- #: gnu/packages/perl.scm:2134
- msgid "Facility for creating read-only scalars, arrays, and hashes"
- msgstr ""
- #: gnu/packages/perl.scm:2135
- msgid ""
- "This package provides procedures to create read-only\n"
- "scalars, arrays, and hashes."
- msgstr ""
- #: gnu/packages/perl.scm:2155
- msgid "Preserve context during subroutine call"
- msgstr ""
- #: gnu/packages/perl.scm:2156
- msgid ""
- "This module runs code after a subroutine call, preserving\n"
- "the context the subroutine would have seen if it were the last statement in\n"
- "the caller."
- msgstr ""
- #: gnu/packages/perl.scm:2180
- msgid "Extract data from Macintosh BinHex files"
- msgstr ""
- #: gnu/packages/perl.scm:2182
- msgid ""
- "BinHex is a format for transporting files safely through electronic\n"
- "mail, as short-lined, 7-bit, semi-compressed data streams. This module\n"
- "provides a means of converting those data streams back into into binary\n"
- "data."
- msgstr ""
- #: gnu/packages/perl.scm:2203
- msgid "Read and write @file{Changes} files"
- msgstr ""
- #: gnu/packages/perl.scm:2205
- msgid ""
- "@code{CPAN::Changes} helps users programmatically read and write\n"
- "@file{Changes} files that conform to a common specification."
- msgstr ""
- #: gnu/packages/perl.scm:2225
- msgid "Extract the name and version from a distribution filename"
- msgstr ""
- #: gnu/packages/perl.scm:2227
- msgid ""
- "@code{CPAN::DistnameInfo} uses heuristics to extract the distribution\n"
- "name and version from filenames."
- msgstr ""
- #: gnu/packages/perl.scm:2247
- msgid "Verify requirements in a CPAN::Meta object"
- msgstr ""
- #: gnu/packages/perl.scm:2248
- msgid ""
- "This module verifies if requirements described in a\n"
- "CPAN::Meta object are present."
- msgstr ""
- #: gnu/packages/perl.scm:2267
- msgid "JSON::XS for Cpanel"
- msgstr ""
- #: gnu/packages/perl.scm:2268 gnu/packages/perl.scm:6039
- msgid ""
- "This module converts Perl data structures to JSON and vice\n"
- "versa."
- msgstr ""
- #: gnu/packages/perl.scm:2306
- msgid "Critique Perl source code for best-practices"
- msgstr ""
- #: gnu/packages/perl.scm:2308
- msgid ""
- "@code{perlcritic} is a Perl source code analyzer. It is the\n"
- "executable front-end to the @code{Perl::Critic} engine, which attempts to\n"
- "identify awkward, hard to read, error-prone, or unconventional constructs in\n"
- "your code. Most of the rules are based on Damian Conway's book \"Perl Best\n"
- "Practices\". However, @code{perlcritic} is not limited to enforcing PBP, and it\n"
- "will even support rules that contradict Conway. All rules can easily be\n"
- "configured or disabled to your liking."
- msgstr ""
- #: gnu/packages/perl.scm:2334
- msgid "Encrypt Data with Cipher Block Chaining Mode"
- msgstr ""
- #: gnu/packages/perl.scm:2335
- msgid ""
- "@code{Crypt::CBC} is a Perl-only implementation of\n"
- "the cryptographic Cipher Block Chaining (CBC) mode. In combination\n"
- "with a block cipher such as @code{Crypt::Rijndael} you can encrypt and\n"
- "decrypt messages of arbitrarily long length. The encrypted messages\n"
- "are compatible with the encryption format used by SSLeay."
- msgstr ""
- #: gnu/packages/perl.scm:2359
- msgid "DES encryption module"
- msgstr ""
- #: gnu/packages/perl.scm:2360
- msgid ""
- "@code{Crypt::DES} is an XS-based implementation of\n"
- "the DES cryptography algorithm. The module implements the\n"
- "@code{Crypt::CBC} interface which has blocksize, keysize, encrypt and\n"
- "decrypt functions."
- msgstr ""
- #: gnu/packages/perl.scm:2385
- msgid "The Eksblowfish block cipher"
- msgstr ""
- #: gnu/packages/perl.scm:2386
- msgid ""
- "Eksblowfish is a variant of the Blowfish cipher,\n"
- "modified to make the key setup very expensive. This doesn't make it\n"
- "significantly cryptographically stronger but is intended to hinder\n"
- "brute-force attacks. Eksblowfish is a parameterised (family-keyed)\n"
- "cipher. It takes a cost parameter that controls how expensive the key\n"
- "scheduling is. It also takes a family key, known as the \"salt\".\n"
- "Cost and salt parameters together define a cipher family. Within each\n"
- "family, the key determines the encryption function. This distribution\n"
- "also includes an implementation of @code{bcrypt}, the Unix crypt()\n"
- "password hashing algorithm based on Eksblowfish."
- msgstr ""
- #: gnu/packages/perl.scm:2417
- msgid "Emulate the MySQL PASSWORD() function"
- msgstr ""
- #: gnu/packages/perl.scm:2418
- msgid ""
- "@code{Crypt::MySQL} emulates the MySQL PASSWORD()\n"
- "function. The module does not depend on an interface to the MySQL\n"
- "database server. This enables the comparison of encrypted passwords\n"
- "without the need for a real MySQL environment."
- msgstr ""
- #: gnu/packages/perl.scm:2441
- msgid "Interoperable MD5-based crypt() functions"
- msgstr ""
- #: gnu/packages/perl.scm:2442
- msgid ""
- "@code{Crypt::PasswdMD5} provides various\n"
- "crypt()-compatible interfaces to the MD5-based crypt() function found\n"
- "in various *nixes. It is based on the implementation found on FreeBSD\n"
- "2.2.[56]-RELEASE."
- msgstr ""
- #: gnu/packages/perl.scm:2462
- msgid "Random password generator"
- msgstr ""
- #: gnu/packages/perl.scm:2463
- msgid ""
- "Crypt::RandPasswd provides three functions that can be used\n"
- "to generate random passwords, constructed from words, letters, or characters.\n"
- "This code is a Perl implementation of the Automated Password Generator\n"
- "standard, like the program described in \"A Random Word Generator For\n"
- "Pronounceable Passwords\". This code is a re-engineering of the program\n"
- "contained in Appendix A of FIPS Publication 181, \"Standard for Automated\n"
- "Password Generator\"."
- msgstr ""
- #: gnu/packages/perl.scm:2486
- msgid "Crypt::CBC compliant Rijndael encryption module"
- msgstr ""
- #: gnu/packages/perl.scm:2487
- msgid ""
- "This module implements the Rijndael cipher which has\n"
- "been selected as the Advanced Encryption Standard. The keysize for\n"
- "Rijndael is 32 bytes. The blocksize is 16 bytes (128 bits). The\n"
- "supported encryption modes are:\n"
- "\n"
- "@itemize\n"
- "@item @code{MODE_CBC}---Cipher Block Chaining\n"
- "@item @code{MODE_CFB}---Cipher feedback\n"
- "@item @code{MODE_CTR}---Counter mode\n"
- "@item @code{MODE_ECB}---Electronic cookbook mode\n"
- "@item @code{MODE_OFB}---Output feedback\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/perl.scm:2517
- msgid "Perl implementation of the RC4 encryption algorithm"
- msgstr ""
- #: gnu/packages/perl.scm:2518
- msgid "A pure Perl implementation of the RC4 algorithm."
- msgstr ""
- #: gnu/packages/perl.scm:2536
- msgid "XS interface for a portable traditional crypt function"
- msgstr ""
- #: gnu/packages/perl.scm:2537
- msgid ""
- "@code{Crypt::UnixCrypt_XS} implements the DES-based\n"
- "Unix @code{crypt} function. For those who need to construct\n"
- "non-standard variants of @code{crypt}, the various building blocks\n"
- "used in @code{crypt} are also supplied separately."
- msgstr ""
- #: gnu/packages/perl.scm:2559
- msgid "Temporarily change working directory"
- msgstr ""
- #: gnu/packages/perl.scm:2561
- msgid ""
- "@code{Cwd::Guard} changes the current directory using a limited scope.\n"
- "It returns to the previous working directory when the object is destroyed."
- msgstr ""
- #: gnu/packages/perl.scm:2598
- msgid "Library for genomic analysis"
- msgstr ""
- #: gnu/packages/perl.scm:2599
- msgid ""
- "Chaolin Zhang's Perl Library (czplib) contains assorted\n"
- "functions and data structures for processing and analysing genomic and\n"
- "bioinformatics data."
- msgstr ""
- #: gnu/packages/perl.scm:2623 gnu/packages/perl.scm:2907
- msgid "Base classes wrapping fundamental Perl data types"
- msgstr ""
- #: gnu/packages/perl.scm:2624
- msgid ""
- "Collection of classes that wrap fundamental data types that\n"
- "exist in Perl. These classes and methods as they exist today are an attempt\n"
- "to mirror functionality provided by Moose's Native Traits. One important\n"
- "thing to note is all classes currently do no validation on constructor\n"
- "input."
- msgstr ""
- #: gnu/packages/perl.scm:2646
- msgid "Compare Perl data structures"
- msgstr ""
- #: gnu/packages/perl.scm:2647
- msgid ""
- "This module compares arbitrary data structures to see if\n"
- "they are copies of each other."
- msgstr ""
- #: gnu/packages/perl.scm:2671
- msgid "Entropy (randomness) management"
- msgstr ""
- #: gnu/packages/perl.scm:2672
- msgid ""
- "@code{Data::Entropy} provides modules relating to\n"
- "the generation and use of entropy. The Data::Entropy::Source class\n"
- "manages the entropy coming from a particular source. This class acts\n"
- "as a layer over a raw entropy source, which may be a normal I/O handle\n"
- "or a special-purpose class. The Data::Entropy::RawSource::* classes\n"
- "provide fundamental sources of entropy. The sources specially\n"
- "supported are an OS-supplied entropy collector, downloads from servers\n"
- "on the Internet, and cryptographic fake entropy. The\n"
- "Data::Entropy::Algorithms module contains a collection of fundamental\n"
- "algorithms that use entropy. There are random number generators and\n"
- "functions to shuffle arrays."
- msgstr ""
- #: gnu/packages/perl.scm:2702
- msgid "Details of the native integer data type"
- msgstr ""
- #: gnu/packages/perl.scm:2703
- msgid ""
- "This module is about the native integer numerical\n"
- "data type. A native integer is one of the types of datum that can\n"
- "appear in the numeric part of a Perl scalar. This module supplies\n"
- "constants describing the native integer type. Both signed and\n"
- "unsigned representations are handled."
- msgstr ""
- #: gnu/packages/perl.scm:2724
- msgid "Perl extension for generating unique identifiers"
- msgstr ""
- #: gnu/packages/perl.scm:2725
- msgid ""
- "@code{Data::Uniqid} provides three simple routines for\n"
- "generating unique ids. These ids are coded with a Base62 system to make them\n"
- "short and handy (e.g. to use it as part of a URL)."
- msgstr ""
- #: gnu/packages/perl.scm:2744
- msgid "Universally Unique Identifiers generator"
- msgstr ""
- #: gnu/packages/perl.scm:2745
- msgid ""
- "@code{Data::UUID} provides a framework for generating\n"
- "Universally Unique Identifiers (UUIDs), also known as Globally Unique\n"
- "Identifiers (GUIDs). A UUID is 128 bits long, and is guaranteed to be\n"
- "different from all other UUIDs/GUIDs generated until 3400 CE."
- msgstr ""
- #: gnu/packages/perl.scm:2765
- msgid "Pretty printing of data structures"
- msgstr ""
- #: gnu/packages/perl.scm:2766
- msgid ""
- "This module provide functions that takes a list of values as\n"
- "their argument and produces a string as its result. The string contains Perl\n"
- "code that, when \"eval\"ed, produces a deep copy of the original arguments."
- msgstr ""
- #: gnu/packages/perl.scm:2785
- msgid "Convert data structures to strings"
- msgstr ""
- #: gnu/packages/perl.scm:2786
- msgid ""
- "Given a list of scalars or reference variables,\n"
- "@code{Data::Dumper} writes out their contents in Perl syntax. The references\n"
- "can also be objects. The content of each variable is output in a single Perl\n"
- "statement. It handles self-referential structures correctly."
- msgstr ""
- #: gnu/packages/perl.scm:2806
- msgid "Concise data dumper"
- msgstr ""
- #: gnu/packages/perl.scm:2807
- msgid ""
- "Data::Dumper::Concise provides a dumper with Less\n"
- "indentation and newlines plus sub deparsing."
- msgstr ""
- #: gnu/packages/perl.scm:2828
- msgid "Details of the floating point data type"
- msgstr ""
- #: gnu/packages/perl.scm:2829
- msgid ""
- "@code{Data::Float} is about the native floating\n"
- "point numerical data type. A floating point number is one of the\n"
- "types of datum that can appear in the numeric part of a Perl scalar.\n"
- "This module supplies constants describing the native floating point\n"
- "type, classification functions and functions to manipulate floating\n"
- "point values at a low level."
- msgstr ""
- #: gnu/packages/perl.scm:2854
- msgid "Parse and validate simple name/value option pairs"
- msgstr ""
- #: gnu/packages/perl.scm:2856
- msgid "Data::OptList provides a simple syntax for name/value option pairs."
- msgstr ""
- #: gnu/packages/perl.scm:2876
- msgid "Help when paging through sets of results"
- msgstr ""
- #: gnu/packages/perl.scm:2877
- msgid ""
- "When searching through large amounts of data, it is often\n"
- "the case that a result set is returned that is larger than we want to display\n"
- "on one page. This results in wanting to page through various pages of data.\n"
- "The maths behind this is unfortunately fiddly, hence this module."
- msgstr ""
- #: gnu/packages/perl.scm:2909
- msgid ""
- "@code{Data::Perl} is a container class for the following classes:\n"
- "@itemize\n"
- "@item @code{Data::Perl::Collection::Hash}\n"
- "@item @code{Data::Perl::Collection::Array}\n"
- "@item @code{Data::Perl::String}\n"
- "@item @code{Data::Perl::Number}\n"
- "@item @code{Data::Perl::Counter}\n"
- "@item @code{Data::Perl::Bool}\n"
- "@item @code{Data::Perl::Code}\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/perl.scm:2938
- msgid "Colored pretty-print of Perl data structures and objects"
- msgstr ""
- #: gnu/packages/perl.scm:2939
- msgid ""
- "Display Perl variables and objects on screen, properly\n"
- "formatted (to be inspected by a human)."
- msgstr ""
- #: gnu/packages/perl.scm:2961
- msgid "Conditionally split data into records"
- msgstr ""
- #: gnu/packages/perl.scm:2962
- msgid ""
- "This Perl module allows you to split data into records by\n"
- "not only specifying what you wish to split the data on, but also by specifying\n"
- "an \"unless\" regular expression. If the text in question matches the\n"
- "\"unless\" regex, it will not be split there. This allows us to do things\n"
- "like split on newlines unless newlines are embedded in quotes."
- msgstr ""
- #: gnu/packages/perl.scm:2989
- msgid "Read multiple hunks of data out of your DATA section"
- msgstr ""
- #: gnu/packages/perl.scm:2990
- msgid ""
- "This package provides a Perl library to read multiple hunks\n"
- "of data out of your DATA section."
- msgstr ""
- #: gnu/packages/perl.scm:3009
- msgid "Read data from __DATA__"
- msgstr ""
- #: gnu/packages/perl.scm:3011
- msgid ""
- "Data::Section::Simple is a simple module to extract data from __DATA__\n"
- "section of the file."
- msgstr ""
- #: gnu/packages/perl.scm:3031
- msgid "Structured tags datastructures"
- msgstr ""
- #: gnu/packages/perl.scm:3033
- msgid ""
- "This module is for manipulating data as hierarchical tag/value\n"
- "pairs (Structured TAGs or Simple Tree AGgregates). These datastructures can\n"
- "be represented as nested arrays, which have the advantage of being native to\n"
- "Perl."
- msgstr ""
- #: gnu/packages/perl.scm:3058
- msgid "N at a time iteration API"
- msgstr ""
- #: gnu/packages/perl.scm:3059
- msgid ""
- "This module tries to find middle ground between one at a\n"
- "time and all at once processing of data sets. The purpose of this module is\n"
- "to avoid the overhead of implementing an iterative api when this isn't\n"
- "necessary, without breaking forward compatibility in case that becomes\n"
- "necessary later on."
- msgstr ""
- #: gnu/packages/perl.scm:3083
- msgid "Dynamic generation of nested combinations of variants"
- msgstr ""
- #: gnu/packages/perl.scm:3084
- msgid ""
- "Data::Tumbler - Dynamic generation of nested combinations of\n"
- "variants."
- msgstr ""
- #: gnu/packages/perl.scm:3107
- msgid "Visitor style traversal of Perl data structures"
- msgstr ""
- #: gnu/packages/perl.scm:3108
- msgid ""
- "This module is a simple visitor implementation for Perl\n"
- "values. It has a main dispatcher method, visit, which takes a single perl\n"
- "value and then calls the methods appropriate for that value. It can\n"
- "recursively map (cloning as necessary) or just traverse most structures, with\n"
- "support for per-object behavior, circular structures, visiting tied\n"
- "structures, and all ref types (hashes, arrays, scalars, code, globs)."
- msgstr ""
- #: gnu/packages/perl.scm:3132
- msgid "Gregorian calendar date calculations"
- msgstr ""
- #: gnu/packages/perl.scm:3133
- msgid ""
- "This package consists of a Perl module for date calculations\n"
- "based on the Gregorian calendar, thereby complying with all relevant norms and\n"
- "standards: ISO/R 2015-1971, DIN 1355 and, to some extent, ISO 8601 (where\n"
- "applicable)."
- msgstr ""
- #: gnu/packages/perl.scm:3155
- msgid "XS wrapper for Date::Calc"
- msgstr ""
- #: gnu/packages/perl.scm:3156
- msgid ""
- "Date::Calc::XS is an XS wrapper and C library plug-in for\n"
- "Date::Calc."
- msgstr ""
- #: gnu/packages/perl.scm:3178
- msgid "Date manipulation routines"
- msgstr ""
- #: gnu/packages/perl.scm:3179
- msgid ""
- "Date::Manip is a series of modules for common date/time\n"
- "operations, such as comparing two times, determining a date a given amount of\n"
- "time from another, or parsing international times."
- msgstr ""
- #: gnu/packages/perl.scm:3199
- msgid "Work with a range of dates"
- msgstr ""
- #: gnu/packages/perl.scm:3201
- msgid ""
- "@code{Date::Range} is a library to work with date ranges. It can\n"
- "be used to determine whether a given date is in a particular range, or what\n"
- "the overlap between two ranges are."
- msgstr ""
- #: gnu/packages/perl.scm:3220
- msgid "Simple date handling"
- msgstr ""
- #: gnu/packages/perl.scm:3221
- msgid ""
- "Dates are complex enough without times and timezones. This\n"
- "module may be used to create simple date objects. It handles validation,\n"
- "interval arithmetic, and day-of-week calculation. It does not deal with\n"
- "hours, minutes, seconds, and time zones."
- msgstr ""
- #: gnu/packages/perl.scm:3247
- msgid "Date and time object for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:3248
- msgid ""
- "DateTime is a class for the representation of date/time\n"
- "combinations. It represents the Gregorian calendar, extended backwards in\n"
- "time before its creation (in 1582)."
- msgstr ""
- #: gnu/packages/perl.scm:3269
- msgid "Dates in the Julian calendar"
- msgstr ""
- #: gnu/packages/perl.scm:3270
- msgid ""
- "This package is a companion module to @code{DateTime.pm}.\n"
- "It implements the Julian calendar. It supports everything that\n"
- "@code{DateTime.pm} supports and more: about one day per century more, to be\n"
- "precise."
- msgstr ""
- #: gnu/packages/perl.scm:3294
- msgid "DateTime set objects"
- msgstr ""
- #: gnu/packages/perl.scm:3295
- msgid ""
- "The DateTime::Set module provides a date/time sets\n"
- "implementation. It allows, for example, the generation of groups of dates,\n"
- "like \"every wednesday\", and then find all the dates matching that pattern,\n"
- "within a time range."
- msgstr ""
- #: gnu/packages/perl.scm:3317
- msgid "DateTime rfc2445 recurrences"
- msgstr ""
- #: gnu/packages/perl.scm:3318
- msgid ""
- "This module provides convenience methods that let you easily\n"
- "create DateTime::Set objects for RFC 2445 style recurrences."
- msgstr ""
- #: gnu/packages/perl.scm:3338
- msgid "DateTime::Set extension for basic recurrences"
- msgstr ""
- #: gnu/packages/perl.scm:3339
- msgid ""
- "This module provides convenience methods that let you easily\n"
- "create DateTime::Set objects for various recurrences, such as \"once a month\"\n"
- "or \"every day\". You can also create more complicated recurrences, such as\n"
- "\"every Monday, Wednesday and Thursday at 10:00 AM and 2:00 PM\"."
- msgstr ""
- #: gnu/packages/perl.scm:3362
- msgid "Create DateTime parser classes and objects"
- msgstr ""
- #: gnu/packages/perl.scm:3363
- msgid ""
- "DateTime::Format::Builder creates DateTime parsers. Many\n"
- "string formats of dates and times are simple and just require a basic regular\n"
- "expression to extract the relevant information. Builder provides a simple way\n"
- "to do this without writing reams of structural code."
- msgstr ""
- #: gnu/packages/perl.scm:3387
- msgid "Parse date and time strings"
- msgstr ""
- #: gnu/packages/perl.scm:3388
- msgid ""
- "DateTime::Format::Flexible attempts to take any string you\n"
- "give it and parse it into a DateTime object."
- msgstr ""
- #: gnu/packages/perl.scm:3411
- msgid "Parse and format iCal datetime and duration strings"
- msgstr ""
- #: gnu/packages/perl.scm:3412
- msgid ""
- "This module understands the ICal date/time and duration\n"
- "formats, as defined in RFC 2445. It can be used to parse these formats in\n"
- "order to create the appropriate objects."
- msgstr ""
- #: gnu/packages/perl.scm:3437
- msgid "Parse ISO8601 date and time formats"
- msgstr ""
- #: gnu/packages/perl.scm:3438
- msgid ""
- "@code{DateTime::Format::ISO8601} is a DateTime\n"
- "extension that parses almost all ISO8601 date and time formats."
- msgstr ""
- #: gnu/packages/perl.scm:3466
- msgid "Machine-readable date/time with natural parsing"
- msgstr ""
- #: gnu/packages/perl.scm:3467
- msgid ""
- "DateTime::Format::Natural takes a string with a human\n"
- "readable date/time and creates a machine readable one by applying natural\n"
- "parsing logic."
- msgstr ""
- #: gnu/packages/perl.scm:3493
- msgid "Parse and format strp and strf time patterns"
- msgstr ""
- #: gnu/packages/perl.scm:3494
- msgid ""
- "This module implements most of `strptime(3)`, the POSIX\n"
- "function that is the reverse of `strftime(3)`, for `DateTime`. While\n"
- "`strftime` takes a `DateTime` and a pattern and returns a string, `strptime`\n"
- "takes a string and a pattern and returns the `DateTime` object associated."
- msgstr ""
- #: gnu/packages/perl.scm:3526
- msgid "Localization support for DateTime.pm"
- msgstr ""
- #: gnu/packages/perl.scm:3527
- msgid ""
- "The DateTime::Locale modules provide localization data for\n"
- "the DateTime.pm class."
- msgstr ""
- #: gnu/packages/perl.scm:3567
- msgid "Time zone object for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:3568
- msgid ""
- "This class is the base class for all time zone objects. A\n"
- "time zone is represented internally as a set of observances, each of which\n"
- "describes the offset from GMT for a given time period. Note that without the\n"
- "DateTime module, this module does not do much. It's primary interface is\n"
- "through a DateTime object, and most users will not need to directly use\n"
- "DateTime::TimeZone methods."
- msgstr ""
- #: gnu/packages/perl.scm:3596
- msgid "Parse date/time strings"
- msgstr ""
- #: gnu/packages/perl.scm:3597
- msgid ""
- "DateTimeX::Easy uses a variety of DateTime::Format packages\n"
- "to create DateTime objects, with some custom tweaks to smooth out the rough\n"
- "edges (mainly concerning timezone detection and selection)."
- msgstr ""
- #: gnu/packages/perl.scm:3617
- msgid "Convert between DateTime and RFC2822/822 formats"
- msgstr ""
- #: gnu/packages/perl.scm:3618
- msgid ""
- "RFCs 2822 and 822 specify date formats to be used by email.\n"
- "This module parses and emits such dates."
- msgstr ""
- #: gnu/packages/perl.scm:3639
- msgid "Parse and format W3CDTF datetime strings"
- msgstr ""
- #: gnu/packages/perl.scm:3641
- msgid ""
- "This module understands the W3CDTF date/time format, an ISO 8601 profile,\n"
- "defined at https://www.w3.org/TR/NOTE-datetime. This format is the native date\n"
- "format of RSS 1.0. It can be used to parse these formats in order to create\n"
- "the appropriate objects."
- msgstr ""
- #: gnu/packages/perl.scm:3666
- msgid "Custom op checking attached to subroutines"
- msgstr ""
- #: gnu/packages/perl.scm:3667
- msgid ""
- "This module makes some new features of the Perl\n"
- "5.14.0 C API available to XS modules running on older versions of\n"
- "Perl. The features are centred around the function\n"
- "@code{cv_set_call_checker}, which allows XS code to attach a magical\n"
- "annotation to a Perl subroutine, resulting in resolvable calls to that\n"
- "subroutine being mutated at compile time by arbitrary C code. This\n"
- "module makes @code{cv_set_call_checker} and several supporting\n"
- "functions available."
- msgstr ""
- #: gnu/packages/perl.scm:3693
- msgid "Meatier version of caller"
- msgstr ""
- #: gnu/packages/perl.scm:3694
- msgid "Devel::Caller provides meatier version of caller."
- msgstr ""
- #: gnu/packages/perl.scm:3712
- msgid "Check that a command is available"
- msgstr ""
- #: gnu/packages/perl.scm:3713
- msgid ""
- "Devel::CheckBin is a perl module that checks whether a\n"
- "particular command is available."
- msgstr ""
- #: gnu/packages/perl.scm:3732
- msgid "Check that a library is available"
- msgstr ""
- #: gnu/packages/perl.scm:3734
- msgid ""
- "@code{Devel::CheckLib} is a Perl module that checks whether a particular\n"
- "C library and its headers are available. You can also check for the presence of\n"
- "particular functions in a library, or even that those functions return\n"
- "particular results."
- msgstr ""
- #: gnu/packages/perl.scm:3755
- msgid "Check compiler availability"
- msgstr ""
- #: gnu/packages/perl.scm:3756
- msgid ""
- "@code{Devel::CheckCompiler} is a tiny module to check\n"
- "whether a compiler is available. It can test for a C99 compiler, or\n"
- "you can tell it to compile a C source file with optional linker flags."
- msgstr ""
- #: gnu/packages/perl.scm:3778
- msgid "Find memory cycles in objects"
- msgstr ""
- #: gnu/packages/perl.scm:3780
- msgid ""
- "@code{Devel::Cycle} This is a tool for finding circular references in\n"
- "objects and other types of references. Because of Perl's reference-count\n"
- "based memory management, circular references will cause memory leaks."
- msgstr ""
- #: gnu/packages/perl.scm:3801
- msgid "Provides equivalent of ${^GLOBAL_PHASE} eq 'DESTRUCT' for older perls"
- msgstr ""
- #: gnu/packages/perl.scm:3802
- msgid ""
- "Devel::GlobalDestruction provides a function returning the\n"
- "equivalent of \"$@{^GLOBAL_PHASE@} eq 'DESTRUCT'\" for older perls."
- msgstr ""
- #: gnu/packages/perl.scm:3821
- msgid "Forces the unavailability of specified Perl modules (for testing)"
- msgstr ""
- #: gnu/packages/perl.scm:3822
- msgid ""
- "Given a list of Perl modules/filenames, this module makes\n"
- "@code{require} and @code{use} statements fail (no matter whether the specified\n"
- "files/modules are installed or not)."
- msgstr ""
- #: gnu/packages/perl.scm:3841
- msgid "Utility for looking for perl objects that are not reclaimed"
- msgstr ""
- #: gnu/packages/perl.scm:3843
- msgid ""
- "This module provides a basic way to discover if a piece of perl code is\n"
- "allocating perl data and not releasing them again."
- msgstr ""
- #: gnu/packages/perl.scm:3863
- msgid "Alias lexical variables"
- msgstr ""
- #: gnu/packages/perl.scm:3864
- msgid ""
- "Devel::LexAlias provides the ability to alias a lexical\n"
- "variable in a subroutines scope to one of your choosing."
- msgstr ""
- #: gnu/packages/perl.scm:3886
- msgid "Introspect overloaded operators"
- msgstr ""
- #: gnu/packages/perl.scm:3887
- msgid ""
- "Devel::OverloadInfo returns information about overloaded\n"
- "operators for a given class (or object), including where in the inheritance\n"
- "hierarchy the overloads are declared and where the code implementing it is."
- msgstr ""
- #: gnu/packages/perl.scm:3910
- msgid "Partial dumping of data structures"
- msgstr ""
- #: gnu/packages/perl.scm:3911
- msgid ""
- "This module is a data dumper optimized for logging of\n"
- "arbitrary parameters."
- msgstr ""
- #: gnu/packages/perl.scm:3928
- msgid "Object representing a stack trace"
- msgstr ""
- #: gnu/packages/perl.scm:3929
- msgid ""
- "The Devel::StackTrace module contains two classes,\n"
- "Devel::StackTrace and Devel::StackTrace::Frame. These objects encapsulate the\n"
- "information that can be retrieved via Perl's caller() function, as well as\n"
- "providing a simple interface to this data."
- msgstr ""
- #: gnu/packages/perl.scm:3951
- msgid "Displays stack trace in HTML"
- msgstr ""
- #: gnu/packages/perl.scm:3952
- msgid ""
- "Devel::StackTrace::AsHTML adds as_html method to\n"
- "Devel::StackTrace which displays the stack trace in beautiful HTML, with code\n"
- "snippet context and function parameters. If you call it on an instance of\n"
- "Devel::StackTrace::WithLexicals, you even get to see the lexical variables of\n"
- "each stack frame."
- msgstr ""
- #: gnu/packages/perl.scm:3973
- msgid "Dump symbol names or the symbol table"
- msgstr ""
- #: gnu/packages/perl.scm:3974
- msgid "Devel::Symdump provides access to the perl symbol table."
- msgstr ""
- #: gnu/packages/perl.scm:3991
- msgid "Generic CRC functions"
- msgstr ""
- #: gnu/packages/perl.scm:3992
- msgid ""
- "The @code{Digest::CRC} module calculates CRC sums of\n"
- "all sorts. It contains wrapper functions with the correct parameters\n"
- "for CRC-CCITT, CRC-16 and CRC-32."
- msgstr ""
- #: gnu/packages/perl.scm:4010
- msgid "Keyed-Hashing for Message Authentication"
- msgstr ""
- #: gnu/packages/perl.scm:4011
- msgid ""
- "The Digest::HMAC module follows the common Digest::\n"
- "interface for the RFC 2104 HMAC mechanism."
- msgstr ""
- #: gnu/packages/perl.scm:4030
- msgid "Interface to the MD4 Algorithm"
- msgstr ""
- #: gnu/packages/perl.scm:4031
- msgid ""
- "The @code{Digest::MD4} module allows you to use the\n"
- "RSA Data Security Inc.@: MD4 Message Digest algorithm from within Perl\n"
- "programs. The algorithm takes as input a message of arbitrary length\n"
- "and produces as output a 128-bit \"fingerprint\" or \"message digest\"\n"
- "of the input. MD4 is described in RFC 1320."
- msgstr ""
- #: gnu/packages/perl.scm:4051
- msgid "Perl interface to the MD-5 algorithm"
- msgstr ""
- #: gnu/packages/perl.scm:4053
- msgid ""
- "The @code{Digest::MD5} module allows you to use the MD5 Message Digest\n"
- "algorithm from within Perl programs. The algorithm takes as\n"
- "input a message of arbitrary length and produces as output a\n"
- "128-bit \"fingerprint\" or \"message digest\" of the input."
- msgstr ""
- #: gnu/packages/perl.scm:4077
- msgid "Perl extension for SHA-1/224/256/384/512"
- msgstr ""
- #: gnu/packages/perl.scm:4079
- msgid ""
- "The @code{Digest::SHA} Perl module implements the hash functions\n"
- "of the SHA family. It also provides the @code{shasum} binary."
- msgstr ""
- #: gnu/packages/perl.scm:4095
- msgid "Perl implementation of the SHA-1 message digest algorithm"
- msgstr ""
- #: gnu/packages/perl.scm:4097
- msgid ""
- "This package provides @code{Digest::SHA1}, an implementation of the NIST\n"
- "SHA-1 message digest algorithm for use by Perl programs."
- msgstr ""
- #: gnu/packages/perl.scm:4118
- msgid "Declare version conflicts for your dist"
- msgstr ""
- #: gnu/packages/perl.scm:4119
- msgid ""
- "This module allows you to specify conflicting versions of\n"
- "modules separately and deal with them after the module is done installing."
- msgstr ""
- #: gnu/packages/perl.scm:4140
- msgid "Deconstructed dynamic C library loading"
- msgstr ""
- #: gnu/packages/perl.scm:4141
- msgid ""
- "This module provides a function-based interface to\n"
- "dynamic loading as used by Perl. Some details of dynamic loading are\n"
- "very platform-dependent, so correct use of these functions requires\n"
- "the programmer to be mindfulof the space of platform variations."
- msgstr ""
- #: gnu/packages/perl.scm:4160
- msgid "Character encodings in Perl"
- msgstr ""
- #: gnu/packages/perl.scm:4161
- msgid ""
- "Encode module provides the interface between Perl strings and\n"
- "the rest of the system. Perl strings are sequences of characters."
- msgstr ""
- #: gnu/packages/perl.scm:4181
- msgid "Detect the encoding of data"
- msgstr ""
- #: gnu/packages/perl.scm:4182
- msgid ""
- "This package provides a class @code{Encode::Detect} to detect\n"
- "the encoding of data."
- msgstr ""
- #: gnu/packages/perl.scm:4200
- msgid "ASCII mapping for eucJP encoding"
- msgstr ""
- #: gnu/packages/perl.scm:4201
- msgid ""
- "This package provides an ASCII mapping for the eucJP\n"
- "encoding."
- msgstr ""
- #: gnu/packages/perl.scm:4219
- msgid "JIS X 0212 (aka JIS 2000) encodings"
- msgstr ""
- #: gnu/packages/perl.scm:4220
- msgid ""
- "This package provides encodings for JIS X 0212, which is\n"
- "also known as JIS 2000."
- msgstr ""
- #: gnu/packages/perl.scm:4243
- msgid "Additional Chinese encodings"
- msgstr ""
- #: gnu/packages/perl.scm:4244
- msgid ""
- "This Perl module provides Chinese encodings that are not\n"
- "part of Perl by default, including \"BIG5-1984\", \"BIG5-2003\", \"BIG5PLUS\",\n"
- "\"BIG5EXT\", \"CCCII\", \"EUC-TW\", \"CNS11643-*\", \"GB18030\", and\n"
- "\"UNISYS\"."
- msgstr ""
- #: gnu/packages/perl.scm:4266
- msgid "Advanced operations on path variables"
- msgstr ""
- #: gnu/packages/perl.scm:4267
- msgid ""
- "@code{Env::Path} presents an object-oriented interface to\n"
- "path variables, defined as that subclass of environment variables which name\n"
- "an ordered list of file system elements separated by a platform-standard\n"
- "separator."
- msgstr ""
- #: gnu/packages/perl.scm:4287
- msgid "OO-ish Error/Exception handling for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:4288
- msgid ""
- "The Error package provides two interfaces. Firstly Error\n"
- "provides a procedural interface to exception handling. Secondly Error is a\n"
- "base class for errors/exceptions that can either be thrown, for subsequent\n"
- "catch, or can simply be recorded."
- msgstr ""
- #: gnu/packages/perl.scm:4312
- msgid "Safely and cleanly create closures via string eval"
- msgstr ""
- #: gnu/packages/perl.scm:4313
- msgid ""
- "String eval is often used for dynamic code generation. For\n"
- "instance, Moose uses it heavily, to generate inlined versions of accessors and\n"
- "constructors, which speeds code up at runtime by a significant amount. String\n"
- "eval is not without its issues however - it's difficult to control the scope\n"
- "it's used in (which determines which variables are in scope inside the eval),\n"
- "and it's easy to miss compilation errors, since eval catches them and sticks\n"
- "them in $@@ instead. This module attempts to solve these problems. It\n"
- "provides an eval_closure function, which evals a string in a clean\n"
- "environment, other than a fixed list of specified variables. Compilation\n"
- "errors are rethrown automatically."
- msgstr ""
- #: gnu/packages/perl.scm:4353
- msgid "Lexical scope evaluation library for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:4354
- msgid ""
- "The Eval::WithLexicals Perl library provides support for\n"
- "lexical scope evaluation. This package also includes the @command{tinyrepl}\n"
- "command, which can be used as a minimal Perl read-eval-print loop (REPL)."
- msgstr ""
- #: gnu/packages/perl.scm:4375
- msgid "Allows you to declare real exception classes in Perl"
- msgstr ""
- #: gnu/packages/perl.scm:4376
- msgid ""
- "Exception::Class allows you to declare exception hierarchies\n"
- "in your modules in a \"Java-esque\" manner."
- msgstr ""
- #: gnu/packages/perl.scm:4397
- msgid "Default import method for modules"
- msgstr ""
- #: gnu/packages/perl.scm:4398
- msgid ""
- "Exporter implements an import method which allows a module to\n"
- "export functions and variables to its users' namespaces. Many modules use\n"
- "Exporter rather than implementing their own import method because Exporter\n"
- "provides a highly flexible interface, with an implementation optimised for the\n"
- "common case."
- msgstr ""
- #: gnu/packages/perl.scm:4417
- msgid "Lightweight exporting of functions and variables"
- msgstr ""
- #: gnu/packages/perl.scm:4419
- msgid ""
- "Exporter::Lite is an alternative to Exporter, intended to provide a\n"
- "lightweight subset of the most commonly-used functionality. It supports\n"
- "import(), @@EXPORT and @@EXPORT_OK and not a whole lot else."
- msgstr ""
- #: gnu/packages/perl.scm:4438
- msgid "Exporter with the features of Sub::Exporter but only core dependencies"
- msgstr ""
- #: gnu/packages/perl.scm:4439
- msgid ""
- "Exporter::Tiny supports many of Sub::Exporter's\n"
- "external-facing features including renaming imported functions with the `-as`,\n"
- "`-prefix` and `-suffix` options; explicit destinations with the `into` option;\n"
- "and alternative installers with the `installler` option. But it's written in\n"
- "only about 40% as many lines of code and with zero non-core dependencies."
- msgstr ""
- #: gnu/packages/perl.scm:4460
- msgid "Utilities to write and check a MANIFEST file"
- msgstr ""
- #: gnu/packages/perl.scm:4461
- msgid ""
- "This package contains functions to manipulate a MANIFEST\n"
- "file. The package exports no functions by default. The following are exported\n"
- "on request: mkmanifest, manifind, manicheck, filecheck, fullcheck, skipcheck,\n"
- "maniread, maniskip, manicopy, maniadd."
- msgstr ""
- #: gnu/packages/perl.scm:4483
- msgid "Build.PL install path logic made easy"
- msgstr ""
- #: gnu/packages/perl.scm:4484
- msgid ""
- "This module tries to make install path resolution as easy as\n"
- "possible."
- msgstr ""
- #: gnu/packages/perl.scm:4502
- msgid "Wrapper for perl's configuration"
- msgstr ""
- #: gnu/packages/perl.scm:4503
- msgid ""
- "ExtUtils::Config is an abstraction around the %Config hash.\n"
- "By itself it is not a particularly interesting module by any measure, however\n"
- "it ties together a family of modern toolchain modules."
- msgstr ""
- #: gnu/packages/perl.scm:4529
- msgid "Tool for guessing C++ compiler and flags"
- msgstr ""
- #: gnu/packages/perl.scm:4530
- msgid ""
- "ExtUtils::CppGuess attempts to guess the C++ compiler that\n"
- "is compatible with the C compiler used to build perl."
- msgstr ""
- #: gnu/packages/perl.scm:4549
- msgid "Easily build XS extensions that depend on XS extensions"
- msgstr ""
- #: gnu/packages/perl.scm:4551
- msgid ""
- "This module tries to make it easy to build Perl extensions that use\n"
- "functions and typemaps provided by other perl extensions. This means that a\n"
- "perl extension is treated like a shared library that provides also a C and an\n"
- "XS interface besides the perl one."
- msgstr ""
- #: gnu/packages/perl.scm:4571
- msgid "Various portability utilities for module builders"
- msgstr ""
- #: gnu/packages/perl.scm:4572
- msgid ""
- "This module provides various portable helper functions for\n"
- "module building modules."
- msgstr ""
- #: gnu/packages/perl.scm:4592
- msgid "Tool to build C libraries"
- msgstr ""
- #: gnu/packages/perl.scm:4593
- msgid ""
- "Some Perl modules need to ship C libraries together with\n"
- "their Perl code. Although there are mechanisms to compile and link (or glue)\n"
- "C code in your Perl programs, there isn't a clear method to compile standard,\n"
- "self-contained C libraries. This module main goal is to help in that task."
- msgstr ""
- #: gnu/packages/perl.scm:4616
- msgid "Module to convert Perl XS code into C code"
- msgstr ""
- #: gnu/packages/perl.scm:4617
- msgid ""
- "The package contains the ExtUtils::ParseXS module to\n"
- "convert Perl XS code into C code, the ExtUtils::Typemaps module to\n"
- "handle Perl/XS typemap files, and their submodules."
- msgstr ""
- #: gnu/packages/perl.scm:4664
- msgid "Simplistic interface to pkg-config"
- msgstr ""
- #: gnu/packages/perl.scm:4666
- msgid ""
- "@code{ExtUtils::PkgConfig} is a very simplistic interface to the\n"
- "@command{pkg-config} utility, intended for use in the @file{Makefile.PL}\n"
- "of perl extensions which bind libraries that @command{pkg-config} knows.\n"
- "It is really just boilerplate code that you would have written yourself."
- msgstr ""
- #: gnu/packages/perl.scm:4714
- msgid "Set of useful typemaps"
- msgstr ""
- #: gnu/packages/perl.scm:4715
- msgid ""
- "The package provides a number of useful typemaps as\n"
- "submodules of ExtUtils::Typemaps."
- msgstr ""
- #: gnu/packages/perl.scm:4738
- msgid "XS for C++"
- msgstr ""
- #: gnu/packages/perl.scm:4739
- msgid ""
- "This module implements the Perl foreign function\n"
- "interface XS for C++; it is a thin layer over plain XS."
- msgstr ""
- #: gnu/packages/perl.scm:4767
- msgid "Watch for changes to files"
- msgstr ""
- #: gnu/packages/perl.scm:4768
- msgid ""
- "This module provides a class to monitor a directory for\n"
- "changes made to any file."
- msgstr ""
- #: gnu/packages/perl.scm:4788
- msgid "Get directories of configuration files"
- msgstr ""
- #: gnu/packages/perl.scm:4789
- msgid ""
- "This module is a helper for installing, reading and finding\n"
- "configuration file locations. @code{File::ConfigDir} is a module to help out\n"
- "when Perl modules (especially applications) need to read and store\n"
- "configuration files from more than one location."
- msgstr ""
- #: gnu/packages/perl.scm:4809
- msgid "Recursively copy files and directories"
- msgstr ""
- #: gnu/packages/perl.scm:4810
- msgid ""
- "This module has 3 functions: one to copy files only, one to\n"
- "copy directories only, and one to do either depending on the argument's\n"
- "type."
- msgstr ""
- #: gnu/packages/perl.scm:4831
- msgid "Alternative interface to File::Find"
- msgstr ""
- #: gnu/packages/perl.scm:4832
- msgid ""
- "File::Find::Rule is a friendlier interface to File::Find.\n"
- "It allows you to build rules which specify the desired files and\n"
- "directories."
- msgstr ""
- #: gnu/packages/perl.scm:4853
- msgid "Common rules for searching for Perl things"
- msgstr ""
- #: gnu/packages/perl.scm:4854
- msgid ""
- "File::Find::Rule::Perl provides methods for finding various\n"
- "types Perl-related files, or replicating search queries run on a distribution\n"
- "in various parts of the CPAN ecosystem."
- msgstr ""
- #: gnu/packages/perl.scm:4875
- msgid "Matches patterns in a series of files"
- msgstr ""
- #: gnu/packages/perl.scm:4876
- msgid ""
- "@code{File::Grep} provides similar functionality as perl's\n"
- "builtin @code{grep}, @code{map}, and @code{foreach} commands, but iterating\n"
- "over a passed filelist instead of arrays. While trivial, this module can\n"
- "provide a quick dropin when such functionality is needed."
- msgstr ""
- #: gnu/packages/perl.scm:4899
- msgid "Find your home and other directories on any platform"
- msgstr ""
- #: gnu/packages/perl.scm:4900
- msgid ""
- "File::HomeDir is a module for locating the directories that\n"
- "are @code{owned} by a user (typically your user) and to solve the various issues\n"
- "that arise trying to find them consistently across a wide variety of\n"
- "platforms."
- msgstr ""
- #: gnu/packages/perl.scm:4921
- msgid "Create or remove directory trees"
- msgstr ""
- #: gnu/packages/perl.scm:4922
- msgid ""
- "This module provide a convenient way to create directories\n"
- "of arbitrary depth and to delete an entire directory subtree from the\n"
- "file system."
- msgstr ""
- #: gnu/packages/perl.scm:4945
- msgid "Change directory temporarily for a limited scope"
- msgstr ""
- #: gnu/packages/perl.scm:4946
- msgid ""
- "@code{File::pushd} does a temporary @code{chdir} that is\n"
- "easily and automatically reverted, similar to @code{pushd} in some Unix\n"
- "command shells. It works by creating an object that caches the original\n"
- "working directory. When the object is destroyed, the destructor calls\n"
- "@code{chdir} to revert to the original working directory. By storing the\n"
- "object in a lexical variable with a limited scope, this happens automatically\n"
- "at the end of the scope."
- msgstr ""
- #: gnu/packages/perl.scm:4974
- msgid ""
- "Perl extension for crawling directory trees and compiling\n"
- "lists of files"
- msgstr ""
- #: gnu/packages/perl.scm:4977
- msgid ""
- "The File::List module crawls the directory tree starting at the\n"
- "provided base directory and can return files (and/or directories if desired)\n"
- "matching a regular expression."
- msgstr ""
- #: gnu/packages/perl.scm:4996
- msgid "Lightweight, taint-safe file-finding Perl module"
- msgstr ""
- #: gnu/packages/perl.scm:4997
- msgid "File::Next is a Perl CPAN module for finding files."
- msgstr ""
- #: gnu/packages/perl.scm:5016
- msgid "Read a file backwards by lines"
- msgstr ""
- #: gnu/packages/perl.scm:5017
- msgid ""
- "This module reads a file backwards line by line. It is\n"
- "simple to use, memory efficient and fast. It supports both an object and a\n"
- "tied handle interface.\n"
- "\n"
- "It is intended for processing log and other similar text files which typically\n"
- "have their newest entries appended to them. By default files are assumed to\n"
- "be plain text and have a line ending appropriate to the OS. But you can set\n"
- "the input record separator string on a per file basis."
- msgstr ""
- #: gnu/packages/perl.scm:5043
- msgid "Remove files and directories in Perl"
- msgstr ""
- #: gnu/packages/perl.scm:5044
- msgid ""
- "@code{File::Remove::remove} removes files and directories.\n"
- "It acts like @code{/bin/rm}, for the most part. Although @code{unlink} can be\n"
- "given a list of files, it will not remove directories; this module remedies\n"
- "that. It also accepts wildcards, * and ?, as arguments for file names."
- msgstr ""
- #: gnu/packages/perl.scm:5067
- msgid "Locate per-dist and per-module shared files"
- msgstr ""
- #: gnu/packages/perl.scm:5068
- msgid ""
- "The intent of File::ShareDir is to provide a companion to\n"
- "Class::Inspector and File::HomeDir. Quite often you want or need your Perl\n"
- "module to have access to a large amount of read-only data that is stored on\n"
- "the file-system at run-time. Once the files have been installed to the\n"
- "correct directory, you can use File::ShareDir to find your files again after\n"
- "the installation."
- msgstr ""
- #: gnu/packages/perl.scm:5089
- msgid "Locate per-dist shared files"
- msgstr ""
- #: gnu/packages/perl.scm:5090
- msgid ""
- "File::ShareDir::Dist finds share directories for\n"
- "distributions. It is a companion module to File::ShareDir."
- msgstr ""
- #: gnu/packages/perl.scm:5110
- msgid "Install shared files"
- msgstr ""
- #: gnu/packages/perl.scm:5111
- msgid ""
- "File::ShareDir::Install allows you to install read-only data\n"
- "files from a distribution. It is a companion module to File::ShareDir, which\n"
- "allows you to locate these files after installation."
- msgstr ""
- #: gnu/packages/perl.scm:5129
- msgid "Reading/Writing/Modifying of complete files"
- msgstr ""
- #: gnu/packages/perl.scm:5130
- msgid ""
- "File::Slurp provides subroutines to read or write entire\n"
- "files with a simple call. It also has a subroutine for reading the list of\n"
- "file names in a directory."
- msgstr ""
- #: gnu/packages/perl.scm:5155
- msgid "Simple, sane and efficient module to slurp a file"
- msgstr ""
- #: gnu/packages/perl.scm:5156
- msgid ""
- "This module provides functions for fast and correct file\n"
- "slurping and spewing. All functions are optionally exported."
- msgstr ""
- #: gnu/packages/perl.scm:5173
- msgid "Simple file reader and writer"
- msgstr ""
- #: gnu/packages/perl.scm:5175
- msgid "This module provides functions for fast reading and writing of files."
- msgstr ""
- #: gnu/packages/perl.scm:5191
- msgid "Return name and handle of a temporary file safely"
- msgstr ""
- #: gnu/packages/perl.scm:5192
- msgid ""
- "File::Temp can be used to create and open temporary files in\n"
- "a safe way."
- msgstr ""
- #: gnu/packages/perl.scm:5209
- msgid "Portable implementation of the `which' utility"
- msgstr ""
- #: gnu/packages/perl.scm:5211
- msgid ""
- "File::Which was created to be able to get the paths to executable\n"
- "programs on systems under which the `which' program wasn't implemented in the\n"
- "shell."
- msgstr ""
- #: gnu/packages/perl.scm:5233
- msgid "Extended Unix style glob functionality"
- msgstr ""
- #: gnu/packages/perl.scm:5234
- msgid ""
- "@code{File::Zglob} provides a traditional Unix @code{glob}\n"
- "functionality; it returns a list of file names that match the given pattern.\n"
- "For instance, it supports the @code{**/*.pm} form."
- msgstr ""
- #: gnu/packages/perl.scm:5255
- msgid "Simple and dumb file system watcher"
- msgstr ""
- #: gnu/packages/perl.scm:5257
- msgid ""
- "@code{Filesys::Notify::Simple} is a simple but unified interface to get\n"
- "notifications of changes to a given file system path. It uses inotify2 on\n"
- "Linux, fsevents on OS X, @code{kqueue} on FreeBSD, and\n"
- "@code{FindFirstChangeNotification} on Windows if they're installed, and falls\n"
- "back to a full directory scan if none of these are available."
- msgstr ""
- #: gnu/packages/perl.scm:5279
- msgid "Perl module for reading script options and parameters from files"
- msgstr ""
- #: gnu/packages/perl.scm:5280
- msgid ""
- "This module simply interpolates option file hints in @code{@@ARGV}\n"
- "by the contents of the pointed files. This enables option reading from files instead\n"
- "of or additional to the usual reading from the command line."
- msgstr ""
- #: gnu/packages/perl.scm:5298
- msgid "Module to handle parsing command line options"
- msgstr ""
- #: gnu/packages/perl.scm:5299
- msgid ""
- "The @code{Getopt::Long} module implements an extended getopt\n"
- "function called @code{GetOptions()}. It parses the command line from\n"
- "@code{ARGV}, recognizing and removing specified options and their possible\n"
- "values.\n"
- "\n"
- "This function adheres to the POSIX syntax for command line options, with GNU\n"
- "extensions. In general, this means that options have long names instead of\n"
- "single letters, and are introduced with a double dash \"--\". Support for\n"
- "bundling of command line options, as was the case with the more traditional\n"
- "single-letter approach, is provided but not enabled by default."
- msgstr ""
- #: gnu/packages/perl.scm:5330
- msgid "Getopt::Long, but simpler and more powerful"
- msgstr ""
- #: gnu/packages/perl.scm:5331
- msgid ""
- "Getopt::Long::Descriptive is yet another Getopt library.\n"
- "It's built atop Getopt::Long, and gets a lot of its features, but tries to\n"
- "avoid making you think about its huge array of options. It also provides\n"
- "usage (help) messages, data validation, and a few other useful features."
- msgstr ""
- #: gnu/packages/perl.scm:5349
- msgid "Table-driven argument parsing for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:5351
- msgid ""
- "Getopt::Tabular is a Perl 5 module for table-driven argument parsing,\n"
- "vaguely inspired by John Ousterhout's Tk_ParseArgv."
- msgstr ""
- #: gnu/packages/perl.scm:5369
- msgid "Perl bindings for POSIX i18n gettext functions"
- msgstr ""
- #: gnu/packages/perl.scm:5371
- msgid ""
- "Locale::gettext provides an object oriented interface to the\n"
- "internationalization functions provided by the C library."
- msgstr ""
- #: gnu/packages/perl.scm:5391
- msgid "Graph data structures and algorithms"
- msgstr ""
- #: gnu/packages/perl.scm:5392
- msgid ""
- "This is @code{Graph}, a Perl module for dealing with graphs,\n"
- "the abstract data structures."
- msgstr ""
- #: gnu/packages/perl.scm:5409
- msgid "Safe cleanup blocks implemented as guards"
- msgstr ""
- #: gnu/packages/perl.scm:5410
- msgid ""
- "@code{Guard} implements so-called @dfn{guards}. A guard is\n"
- "something (usually an object) that \"guards\" a resource, ensuring that it is\n"
- "cleaned up when expected.\n"
- "\n"
- "Specifically, this module supports two different types of guards: guard\n"
- "objects, which execute a given code block when destroyed, and scoped guards,\n"
- "which are tied to the scope exit."
- msgstr ""
- #: gnu/packages/perl.scm:5445
- msgid "Lightweight field hash for inside-out objects"
- msgstr ""
- #: gnu/packages/perl.scm:5446
- msgid ""
- "@code{Hash::FieldHash} provides the field hash mechanism\n"
- "which supports the inside-out technique. It is an alternative to\n"
- "@code{Hash::Util::FieldHash} with a simpler interface, higher performance, and\n"
- "relic support."
- msgstr ""
- #: gnu/packages/perl.scm:5470
- msgid "Merge arbitrarily deep hashes into a single hash"
- msgstr ""
- #: gnu/packages/perl.scm:5471
- msgid ""
- "Hash::Merge merges two arbitrarily deep hashes into a single\n"
- "hash. That is, at any level, it will add non-conflicting key-value pairs from\n"
- "one hash to the other, and follows a set of specific rules when there are key\n"
- "value conflicts. The hash is followed recursively, so that deeply nested\n"
- "hashes that are at the same level will be merged when the parent hashes are\n"
- "merged."
- msgstr ""
- #: gnu/packages/perl.scm:5493
- msgid "Store multiple values per key"
- msgstr ""
- #: gnu/packages/perl.scm:5494
- msgid ""
- "Hash::MultiValue is an object (and a plain hash reference)\n"
- "that may contain multiple values per key, inspired by MultiDict of WebOb."
- msgstr ""
- #: gnu/packages/perl.scm:5512
- msgid "Lexically scoped subroutine wrappers"
- msgstr ""
- #: gnu/packages/perl.scm:5514
- msgid ""
- "Hook::LexWrap allows you to install a pre- or post-wrapper (or\n"
- "both) around an existing subroutine. Unlike other modules that\n"
- "provide this capacity (e.g., Hook::PreAndPost and Hook::WrapSub),\n"
- "Hook::LexWrap implements wrappers in such a way that the standard\n"
- "caller function works correctly within the wrapped subroutine."
- msgstr ""
- #: gnu/packages/perl.scm:5535
- msgid "Alternative but compatible interface to modules that export symbols"
- msgstr ""
- #: gnu/packages/perl.scm:5536
- msgid ""
- "This module acts as a layer between Exporter and modules which\n"
- "consume exports. It is feature-compatible with Exporter, plus some much needed\n"
- "extras. You can use this to import symbols from any exporter that follows\n"
- "Exporters specification. The exporter modules themselves do not need to use or\n"
- "inherit from the Exporter module, they just need to set @@EXPORT and/or other\n"
- "variables."
- msgstr ""
- #: gnu/packages/perl.scm:5560
- msgid "Import packages into other packages"
- msgstr ""
- #: gnu/packages/perl.scm:5561
- msgid ""
- "Writing exporters is a pain. Some use Exporter, some use\n"
- "Sub::Exporter, some use Moose::Exporter, some use Exporter::Declare ... and\n"
- "some things are pragmas. Exporting on someone else's behalf is harder. The\n"
- "exporters don't provide a consistent API for this, and pragmas need to have\n"
- "their import method called directly, since they effect the current unit of\n"
- "compilation. Import::Into provides global methods to make this painless."
- msgstr ""
- #: gnu/packages/perl.scm:5583
- msgid "Use modules in inc/ if newer than installed"
- msgstr ""
- #: gnu/packages/perl.scm:5584
- msgid ""
- "The inc::latest module helps bootstrap configure-time\n"
- "dependencies for CPAN distributions. These dependencies get bundled into the\n"
- "inc directory within a distribution and are used by Makefile.PL or Build.PL."
- msgstr ""
- #: gnu/packages/perl.scm:5603
- msgid "Lexically warn about using the indirect method call syntax"
- msgstr ""
- #: gnu/packages/perl.scm:5605
- msgid "Indirect warns about using the indirect method call syntax."
- msgstr ""
- #: gnu/packages/perl.scm:5625
- msgid "Write Perl subroutines in other programming languages"
- msgstr ""
- #: gnu/packages/perl.scm:5626
- msgid ""
- "The @code{Inline} module allows you to put source code\n"
- "from other programming languages directly (inline) in a Perl script or\n"
- "module. The code is automatically compiled as needed, and then loaded\n"
- "for immediate access from Perl."
- msgstr ""
- #: gnu/packages/perl.scm:5663
- msgid "C Language Support for Inline"
- msgstr ""
- #: gnu/packages/perl.scm:5664
- msgid ""
- "The @code{Inline::C} module allows you to write Perl\n"
- "subroutines in C. Since version 0.30 the @code{Inline} module supports\n"
- "multiple programming languages and each language has its own support module.\n"
- "This document describes how to use Inline with the C programming language.\n"
- "It also goes a bit into Perl C internals."
- msgstr ""
- #: gnu/packages/perl.scm:5689
- msgid "@code{IO::All} to Larry Wall!"
- msgstr ""
- #: gnu/packages/perl.scm:5690
- msgid ""
- "@code{IO::All} combines all of the best Perl IO modules into\n"
- "a single nifty object oriented interface to greatly simplify your everyday\n"
- "Perl IO idioms. It exports a single function called io, which returns a new\n"
- "@code{IO::All} object. And that object can do it all!"
- msgstr ""
- #: gnu/packages/perl.scm:5711
- msgid "Capture STDOUT and STDERR from Perl code, subprocesses or XS"
- msgstr ""
- #: gnu/packages/perl.scm:5712
- msgid ""
- "@code{IO::CaptureOutput} provides routines for capturing\n"
- "@code{STDOUT} and @code{STDERR} from perl subroutines, forked system\n"
- "calls (e.g. @code{system()}, @code{fork()}) and from XS or C modules.\n"
- "\n"
- "This module is no longer recommended by its maintainer. Users are advised to\n"
- "try @code{Capture::Tiny} instead."
- msgstr ""
- #: gnu/packages/perl.scm:5733
- msgid "Utilities for interactive I/O"
- msgstr ""
- #: gnu/packages/perl.scm:5734
- msgid ""
- "This module provides three utility subroutines that make it\n"
- "easier to develop interactive applications: is_interactive(), interactive(),\n"
- "and busy()."
- msgstr ""
- #: gnu/packages/perl.scm:5767
- msgid "Select a pager and pipe text to it"
- msgstr ""
- #: gnu/packages/perl.scm:5769
- msgid ""
- "@code{IO::Pager} can be used to locate an available pager and use it to\n"
- "display output if a TTY is in use."
- msgstr ""
- #: gnu/packages/perl.scm:5787
- msgid "Emulate file interface for in-core strings"
- msgstr ""
- #: gnu/packages/perl.scm:5788
- msgid ""
- "IO::String is an IO::File (and IO::Handle) compatible class\n"
- "that reads or writes data from in-core strings."
- msgstr ""
- #: gnu/packages/perl.scm:5806
- msgid "IO:: interface for reading/writing an array of lines"
- msgstr ""
- #: gnu/packages/perl.scm:5807
- msgid ""
- "This toolkit primarily provides modules for performing both\n"
- "traditional and object-oriented i/o) on things *other* than normal\n"
- "filehandles; in particular, IO::Scalar, IO::ScalarArray, and IO::Lines."
- msgstr ""
- #: gnu/packages/perl.scm:5825
- msgid "Perl interface to pseudo ttys"
- msgstr ""
- #: gnu/packages/perl.scm:5827
- msgid ""
- "This package provides the @code{IO::Pty} and @code{IO::Tty} Perl\n"
- "interfaces to pseudo ttys."
- msgstr ""
- #: gnu/packages/perl.scm:5844
- msgid "Run interactive command-line programs"
- msgstr ""
- #: gnu/packages/perl.scm:5845
- msgid ""
- "@code{IPC::Cmd} allows for the searching and execution of\n"
- "any binary on your system. It adheres to verbosity settings and is able to\n"
- "run interactively. It also has an option to capture output/error buffers."
- msgstr ""
- #: gnu/packages/perl.scm:5874
- msgid "Run system() and background procs w/ piping, redirs, ptys"
- msgstr ""
- #: gnu/packages/perl.scm:5875
- msgid ""
- "IPC::Run allows you run and interact with child processes\n"
- "using files, pipes, and pseudo-ttys. Both system()-style and scripted usages\n"
- "are supported and may be mixed. Likewise, functional and OO API styles are\n"
- "both supported and may be mixed."
- msgstr ""
- #: gnu/packages/perl.scm:5893
- msgid "Run a subprocess with input/output redirection"
- msgstr ""
- #: gnu/packages/perl.scm:5895
- msgid ""
- "The IPC::Run3 module allows you to run a subprocess and redirect stdin,\n"
- "stdout, and/or stderr to files and perl data structures. It aims to satisfy\n"
- "99% of the need for using system, qx, and open3 with a simple, extremely\n"
- "Perlish API and none of the bloat and rarely used features of IPC::Run."
- msgstr ""
- #: gnu/packages/perl.scm:5918
- msgid "Lightweight interface to shared memory"
- msgstr ""
- #: gnu/packages/perl.scm:5919
- msgid ""
- "IPC::ShareLite provides a simple interface to shared memory,\n"
- "allowing data to be efficiently communicated between processes."
- msgstr ""
- #: gnu/packages/perl.scm:5937
- msgid "Run commands simply, with detailed diagnostics"
- msgstr ""
- #: gnu/packages/perl.scm:5938
- msgid ""
- "Calling Perl's in-built @code{system} function is easy,\n"
- "determining if it was successful is hard. Let's face it, @code{$?} isn't the\n"
- "nicest variable in the world to play with, and even if you do check it,\n"
- "producing a well-formatted error string takes a lot of work.\n"
- "\n"
- "@code{IPC::System::Simple} takes the hard work out of calling external\n"
- "commands."
- msgstr ""
- #: gnu/packages/perl.scm:5963
- msgid "JSON encoder/decoder for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:5964
- msgid ""
- "This module converts Perl data structures to JSON and vice\n"
- "versa using either JSON::XS or JSON::PP."
- msgstr ""
- #: gnu/packages/perl.scm:5987
- msgid "Wrapper for Perl JSON classes"
- msgstr ""
- #: gnu/packages/perl.scm:5989
- msgid ""
- "This module tries to provide a coherent API to bring together the\n"
- "various JSON modules currently on CPAN. This module will allow you to code to\n"
- "any JSON API and have it work regardless of which JSON module is actually\n"
- "installed."
- msgstr ""
- #: gnu/packages/perl.scm:6013
- msgid "Cpanel::JSON::XS with fallback"
- msgstr ""
- #: gnu/packages/perl.scm:6014
- msgid ""
- "This module first checks to see if either Cpanel::JSON::XS\n"
- "or JSON::XS is already loaded, in which case it uses that module. Otherwise\n"
- "it tries to load Cpanel::JSON::XS, then JSON::XS, then JSON::PP in order, and\n"
- "either uses the first module it finds or throws an error."
- msgstr ""
- #: gnu/packages/perl.scm:6038
- msgid "JSON serialising/deserialising for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:6061
- msgid "Prevent leakage of lexical hints"
- msgstr ""
- #: gnu/packages/perl.scm:6063
- msgid "Lexical::SealRequireHints prevents leakage of lexical hints"
- msgstr ""
- #: gnu/packages/perl.scm:6086
- msgid "Use other catalog formats in Maketext"
- msgstr ""
- #: gnu/packages/perl.scm:6088
- msgid ""
- "This module provides lexicon-handling modules to read from other\n"
- "localization formats, such as Gettext, Msgcat, and so on."
- msgstr ""
- #: gnu/packages/perl.scm:6105
- msgid "Bringing loggers and listeners together"
- msgstr ""
- #: gnu/packages/perl.scm:6106
- msgid ""
- "@code{Log::Any} provides a standard log production API for\n"
- "modules. @code{Log::Any::Adapter} allows applications to choose the mechanism\n"
- "for log consumption, whether screen, file or another logging mechanism like\n"
- "@code{Log::Dispatch} or @code{Log::Log4perl}.\n"
- "\n"
- "A CPAN module uses @code{Log::Any} to get a log producer object. An\n"
- "application, in turn, may choose one or more logging mechanisms via\n"
- "@code{Log::Any::Adapter}, or none at all.\n"
- "\n"
- "@code{Log::Any} has a very tiny footprint and no dependencies beyond Perl\n"
- "itself, which makes it appropriate for even small CPAN modules to use. It\n"
- "defaults to @code{null} logging activity, so a module can safely log without\n"
- "worrying about whether the application has chosen (or will ever choose) a\n"
- "logging mechanism."
- msgstr ""
- #: gnu/packages/perl.scm:6141
- msgid "Log::Any adapter for Log::Log4perl"
- msgstr ""
- #: gnu/packages/perl.scm:6142
- msgid ""
- "@code{Log::Any::Adapter::Log4perl} provides a\n"
- "@code{Log::Any} adapter using @code{Log::Log4perl} for logging."
- msgstr ""
- #: gnu/packages/perl.scm:6160
- msgid "Powerful and flexible message logging mechanism"
- msgstr ""
- #: gnu/packages/perl.scm:6161
- msgid ""
- "This package enables you to do generic message logging\n"
- "throughout programs and projects. Every message will be logged with\n"
- "stacktraces, timestamps and so on. You can use built-in handlers\n"
- "immediately, or after the fact when you inspect the error stack. It\n"
- "is highly configurable and lets you even provide your own handlers\n"
- "for dealing with messages."
- msgstr ""
- #: gnu/packages/perl.scm:6186
- msgid "Simplified interface to @code{Log::Message}"
- msgstr ""
- #: gnu/packages/perl.scm:6187
- msgid ""
- "This package provides a simplified frontend to\n"
- "@code{Log::Message}, offering most common use for logging, and easy access to\n"
- "the stack (in both raw and pretty-printable form)."
- msgstr ""
- #: gnu/packages/perl.scm:6209
- msgid "Log4j implementation for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:6210
- msgid ""
- "@code{Log::Log4perl} lets you remote-control and fine-tune\n"
- "the logging behaviour of your system from the outside. It implements the\n"
- "widely popular (Java-based) Log4j logging package in pure Perl."
- msgstr ""
- #: gnu/packages/perl.scm:6230
- msgid "Log::Report in the lightest form"
- msgstr ""
- #: gnu/packages/perl.scm:6232
- msgid ""
- "This module allows libraries to have a dependency to a small module\n"
- "instead of the full Log-Report distribution. The full power of\n"
- "@code{Log::Report} is only released when the main program uses that module.\n"
- "In that case, the module using the @code{Optional} will also use the full\n"
- "@code{Log::Report}, otherwise the dressed-down @code{Log::Report::Minimal}\n"
- "version."
- msgstr ""
- #: gnu/packages/perl.scm:6256
- msgid "Get messages to users and logs"
- msgstr ""
- #: gnu/packages/perl.scm:6258
- msgid ""
- "@code{Log::Report} combines three tasks which are closely related in\n"
- "one: logging, exceptions, and translations."
- msgstr ""
- #: gnu/packages/perl.scm:6286
- msgid "High-level interface to Uniforum message translation"
- msgstr ""
- #: gnu/packages/perl.scm:6287
- msgid ""
- "This package is an internationalization library for Perl\n"
- "that aims to be compatible with the Uniforum message translations system as\n"
- "implemented for example in GNU gettext."
- msgstr ""
- #: gnu/packages/perl.scm:6307
- msgid "Split text into sentences"
- msgstr ""
- #: gnu/packages/perl.scm:6309
- msgid ""
- "The Lingua::EN::Sentence module contains the function get_sentences,\n"
- "which splits text into its constituent sentences, based on a regular\n"
- "expression and a list of abbreviations (built in and given)."
- msgstr ""
- #: gnu/packages/perl.scm:6340
- msgid "Transliterate text between writing systems"
- msgstr ""
- #: gnu/packages/perl.scm:6341
- msgid ""
- "@code{Lingua::Translit} can be used to convert text from one\n"
- "writing system to another, based on national or international transliteration\n"
- "tables. Where possible a reverse transliteration is supported."
- msgstr ""
- #: gnu/packages/perl.scm:6363
- msgid "Scalable file change notification"
- msgstr ""
- #: gnu/packages/perl.scm:6364
- msgid ""
- "This module implements an interface to the Linux 2.6.13 and\n"
- "later Inotify file change notification system."
- msgstr ""
- #: gnu/packages/perl.scm:6386
- msgid "Combination of List::Util and List::MoreUtils"
- msgstr ""
- #: gnu/packages/perl.scm:6387
- msgid ""
- "This module exports all of the functions that either\n"
- "List::Util or List::MoreUtils defines, with preference to List::Util."
- msgstr ""
- #: gnu/packages/perl.scm:6409
- msgid "Compare elements of two or more lists"
- msgstr ""
- #: gnu/packages/perl.scm:6410
- msgid ""
- "@code{List::Compare} provides a module to perform\n"
- "comparative operations on two or more lists. Provided operations include\n"
- "intersections, unions, unique elements, complements and many more."
- msgstr ""
- #: gnu/packages/perl.scm:6442 gnu/packages/perl.scm:6487
- msgid "Provide the stuff missing in List::Util"
- msgstr ""
- #: gnu/packages/perl.scm:6443
- msgid ""
- "List::MoreUtils provides some trivial but commonly needed\n"
- "functionality on lists which is not going to go into List::Util."
- msgstr ""
- #: gnu/packages/perl.scm:6462
- msgid "Provide the stuff missing in List::Util in XS"
- msgstr ""
- #: gnu/packages/perl.scm:6463
- msgid ""
- "@code{List::MoreUtils::XS} provides some trivial but\n"
- "commonly needed functionality on lists which is not going to go into\n"
- "@code{List::Util}."
- msgstr ""
- #: gnu/packages/perl.scm:6488
- msgid ""
- "@code{List::SomeUtils} provides some trivial but commonly\n"
- "needed functionality on lists which is not going to go into @code{List::Util}.\n"
- "\n"
- "All of the below functions are implementable in only a couple of lines of Perl\n"
- "code. Using the functions from this module however should give slightly\n"
- "better performance as everything is implemented in C. The pure-Perl\n"
- "implementation of these functions only serves as a fallback in case the C\n"
- "portions of this module couldn't be compiled on this machine."
- msgstr ""
- #: gnu/packages/perl.scm:6517
- msgid "Bundle of ancient email modules"
- msgstr ""
- #: gnu/packages/perl.scm:6518
- msgid ""
- "MailTools contains the following modules:\n"
- "@table @asis\n"
- "@item Mail::Address\n"
- "Parse email address from a header line.\n"
- "@item Mail::Cap\n"
- "Interpret mailcap files: mappings of file-types to applications as used by\n"
- "many command-line email programs.\n"
- "@item Mail::Field\n"
- "Simplifies access to (some) email header fields. Used by Mail::Header.\n"
- "@item Mail::Filter\n"
- "Process Mail::Internet messages.\n"
- "@item Mail::Header\n"
- "Collection of Mail::Field objects, representing the header of a Mail::Internet\n"
- "object.\n"
- "@item Mail::Internet\n"
- "Represents a single email message, with header and body.\n"
- "@item Mail::Mailer\n"
- "Send Mail::Internet emails via direct smtp or local MTA's.\n"
- "@item Mail::Send\n"
- "Build a Mail::Internet object, and then send it out using Mail::Mailer.\n"
- "@item Mail::Util\n"
- "\"Smart functions\" you should not depend on.\n"
- "@end table"
- msgstr ""
- #: gnu/packages/perl.scm:6560
- msgid "Simple platform independent mailer"
- msgstr ""
- #: gnu/packages/perl.scm:6561
- msgid ""
- "Mail::Sendmail is a pure perl module that provides a\n"
- "simple means to send email from a perl script. The module only\n"
- "requires Perl5 and a network connection."
- msgstr ""
- #: gnu/packages/perl.scm:6580
- msgid "Solution of bezier curves"
- msgstr ""
- #: gnu/packages/perl.scm:6581
- msgid ""
- "This module implements the algorithm for the solution of Bezier\n"
- "curves as presented by Robert D Miller in Graphics Gems V, \"Quick and Simple\n"
- "Bezier Curve Drawing\"."
- msgstr ""
- #: gnu/packages/perl.scm:6600
- msgid "Perl extension for rounding numbers"
- msgstr ""
- #: gnu/packages/perl.scm:6601
- msgid ""
- "@code{Math::Round} provides functions to round numbers,\n"
- "both positive and negative, in various ways."
- msgstr ""
- #: gnu/packages/perl.scm:6619
- msgid "Basic numeric stats on vectors"
- msgstr ""
- #: gnu/packages/perl.scm:6620
- msgid ""
- "This package provides some basic statistics on numerical\n"
- "vectors. All the subroutines can take a reference to the vector to be\n"
- "operated on."
- msgstr ""
- #: gnu/packages/perl.scm:6639
- msgid "Make functions faster by trading space for time"
- msgstr ""
- #: gnu/packages/perl.scm:6640
- msgid ""
- "This package transparently speeds up functions by caching\n"
- "return values, trading space for time."
- msgstr ""
- #: gnu/packages/perl.scm:6658
- msgid "Expiry plug-in for Memoize that adds LRU cache expiration"
- msgstr ""
- #: gnu/packages/perl.scm:6659
- msgid ""
- "This module implements an expiry policy for Memoize that\n"
- "follows LRU semantics, that is, the last n results, where n is specified as\n"
- "the argument to the CACHESIZE parameter, will be cached."
- msgstr ""
- #: gnu/packages/perl.scm:6682
- msgid "Tools to determine actual memory usage"
- msgstr ""
- #: gnu/packages/perl.scm:6684
- msgid ""
- "This module lets you attempt to measure, from your operating system's\n"
- "perspective, how much memory a process is using at any given time."
- msgstr ""
- #: gnu/packages/perl.scm:6703
- msgid "Encoding and decoding of base64 strings"
- msgstr ""
- #: gnu/packages/perl.scm:6704
- msgid ""
- "MIME::Base64 module provides functions to encode and decode\n"
- "strings into and from the base64 encoding specified in RFC 2045 - MIME\n"
- "(Multipurpose Internet Mail Extensions). The base64 encoding is designed to\n"
- "represent arbitrary sequences of octets in a form that need not be humanly\n"
- "readable. A 65-character subset ([A-Za-z0-9+/=]) of US-ASCII is used, enabling\n"
- "6 bits to be represented per printable character."
- msgstr ""
- #: gnu/packages/perl.scm:6725
- msgid "Charset information for MIME messages"
- msgstr ""
- #: gnu/packages/perl.scm:6727
- msgid ""
- "@code{MIME::Charset} provides information about character sets used for\n"
- "MIME messages on Internet."
- msgstr ""
- #: gnu/packages/perl.scm:6754
- msgid "Tools to manipulate MIME messages"
- msgstr ""
- #: gnu/packages/perl.scm:6756
- msgid ""
- "MIME-tools is a collection of Perl5 MIME:: modules for parsing,\n"
- "decoding, and generating single- or multipart (even nested multipart) MIME\n"
- "messages."
- msgstr ""
- #: gnu/packages/perl.scm:6775
- msgid "Definition of MIME types"
- msgstr ""
- #: gnu/packages/perl.scm:6776
- msgid ""
- "This module provides a list of known mime-types, combined\n"
- "from various sources. For instance, it contains all IANA types and the\n"
- "knowledge of Apache."
- msgstr ""
- #: gnu/packages/perl.scm:6797
- msgid "Write your linewise code for handles; this does the rest"
- msgstr ""
- #: gnu/packages/perl.scm:6798
- msgid ""
- "It's boring to deal with opening files for IO, converting\n"
- "strings to handle-like objects, and all that. With\n"
- "@code{Mixin::Linewise::Readers} and @code{Mixin::Linewise::Writers}, you can\n"
- "just write a method to handle handles, and methods for handling strings and\n"
- "file names are added for you."
- msgstr ""
- #: gnu/packages/perl.scm:6823
- msgid "Enable all of the features of Modern Perl with one import"
- msgstr ""
- #: gnu/packages/perl.scm:6824
- msgid ""
- "@code{Modern::Perl} provides a simple way to enable\n"
- "multiple, by now, standard libraries in a Perl program."
- msgstr ""
- #: gnu/packages/perl.scm:6848
- msgid "Tiny replacement for Module::Build"
- msgstr ""
- #: gnu/packages/perl.scm:6849
- msgid ""
- "Many Perl distributions use a Build.PL file instead of a\n"
- "Makefile.PL file to drive distribution configuration, build, test and\n"
- "installation. Traditionally, Build.PL uses Module::Build as the underlying\n"
- "build system. This module provides a simple, lightweight, drop-in\n"
- "replacement. Whereas Module::Build has over 6,700 lines of code; this module\n"
- "has less than 120, yet supports the features needed by most distributions."
- msgstr ""
- #: gnu/packages/perl.scm:6879
- msgid "The module provides an XS++ enhanced flavour of Module::Build"
- msgstr ""
- #: gnu/packages/perl.scm:6880
- msgid ""
- "This subclass of Module::Build adds some tools and\n"
- "processes to make it easier to use for wrapping C++ using XS++\n"
- "(ExtUtils::XSpp)."
- msgstr ""
- #: gnu/packages/perl.scm:6903
- msgid "Module::Build class for building XS modules"
- msgstr ""
- #: gnu/packages/perl.scm:6905
- msgid ""
- "@code{Module::Build::XSUtil} is subclass of @code{Module::Build}\n"
- "for support building XS modules.\n"
- "\n"
- "This is a list of a new parameters in the @code{Module::Build::new} method:\n"
- "\n"
- "@enumerate\n"
- "@item @code{needs_compiler_c99}: This option checks C99 compiler availability.\n"
- "@item @code{needs_compiler_cpp}: This option checks C++ compiler availability.\n"
- "Can also pass @code{extra_compiler_flags} and @code{extra_linker_flags} for C++.\n"
- "@item @code{generate_ppport_h}: Generate @file{ppport.h} by @code{Devel::PPPort}.\n"
- "@item @code{generate_xshelper_h}: Generate @file{xshelper.h} which is a helper\n"
- "header file to include @file{EXTERN.h}, @file{perl.h}, @file{XSUB.h} and\n"
- "@file{ppport.h}, and defines some portability stuff which are not supported by\n"
- "@file{ppport.h}.\n"
- "\n"
- "It is ported from @code{Module::Install::XSUtil}.\n"
- "@item @code{cc_warnings}: Toggle compiler warnings. Enabled by default.\n"
- "@item @code{-g options}: Invoke @file{Build.PL} with @code{-g} to enable\n"
- "debug options.\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/perl.scm:6941
- msgid "Find and use installed modules in a (sub)category"
- msgstr ""
- #: gnu/packages/perl.scm:6942
- msgid ""
- "Module::Find lets you find and use modules in categories.\n"
- "This can be useful for auto-detecting driver or plugin modules. You can\n"
- "differentiate between looking in the category itself or in all\n"
- "subcategories."
- msgstr ""
- #: gnu/packages/perl.scm:6966
- msgid "Loads alternate underlying implementations for a module"
- msgstr ""
- #: gnu/packages/perl.scm:6967
- msgid ""
- "This module abstracts out the process of choosing one of\n"
- "several underlying implementations for a module. This can be used to provide\n"
- "XS and pure Perl implementations of a module, or it could be used to load an\n"
- "implementation for a given OS or any other case of needing to provide multiple\n"
- "implementations."
- msgstr ""
- #: gnu/packages/perl.scm:7005
- msgid "Standalone, extensible Perl module installer"
- msgstr ""
- #: gnu/packages/perl.scm:7006
- msgid ""
- "Module::Install is a package for writing installers for\n"
- "CPAN (or CPAN-like) distributions that are clean, simple, minimalist, act in a\n"
- "strictly correct manner with ExtUtils::MakeMaker, and will run on any Perl\n"
- "installation version 5.005 or newer."
- msgstr ""
- #: gnu/packages/perl.scm:7031
- msgid "Parse and examine a Perl distribution @file{MANIFEST} file"
- msgstr ""
- #: gnu/packages/perl.scm:7033
- msgid ""
- "@code{Module::Manifest} is a simple utility module created originally for\n"
- "use in @code{Module::Inspector}.\n"
- "\n"
- "It can load a @file{MANIFEST} file that comes in a Perl distribution tarball,\n"
- "examine the contents, and perform some simple tasks. It can also load the\n"
- "@file{MANIFEST.SKIP} file and check that."
- msgstr ""
- #: gnu/packages/perl.scm:7056
- msgid "Give your Perl module the ability to have plugins"
- msgstr ""
- #: gnu/packages/perl.scm:7057
- msgid ""
- "This module provides a simple but extensible way of having\n"
- "@code{plugins} for your Perl module."
- msgstr ""
- #: gnu/packages/perl.scm:7076
- msgid "Perl runtime module handling"
- msgstr ""
- #: gnu/packages/perl.scm:7077
- msgid ""
- "The functions exported by this module deal with runtime\n"
- "handling of Perl modules, which are normally handled at compile time."
- msgstr ""
- #: gnu/packages/perl.scm:7099
- msgid "Provide information on conflicts for Module::Runtime"
- msgstr ""
- #: gnu/packages/perl.scm:7100
- msgid ""
- "This module provides conflicts checking for Module::Runtime,\n"
- "which had a recent release that broke some versions of Moose. It is called\n"
- "from Moose::Conflicts and moose-outdated."
- msgstr ""
- #: gnu/packages/perl.scm:7121
- msgid "Recursively scan Perl code for dependencies"
- msgstr ""
- #: gnu/packages/perl.scm:7122
- msgid ""
- "Module::ScanDeps is a module to recursively scan Perl\n"
- "programs for dependencies."
- msgstr ""
- #: gnu/packages/perl.scm:7142
- msgid "Module name tools and transformations"
- msgstr ""
- #: gnu/packages/perl.scm:7143
- msgid ""
- "This module provides a few useful functions for manipulating\n"
- "module names. Its main aim is to centralise some of the functions commonly\n"
- "used by modules that manipulate other modules in some way, like converting\n"
- "module names to relative paths."
- msgstr ""
- #: gnu/packages/perl.scm:7173
- msgid "Minimalist Object Orientation (with Moose compatibility)"
- msgstr ""
- #: gnu/packages/perl.scm:7174
- msgid ""
- "Moo is an extremely light-weight Object Orientation system.\n"
- "It allows one to concisely define objects and roles with a convenient syntax\n"
- "that avoids the details of Perl's object system. Moo contains a subset of\n"
- "Moose and is optimised for rapid startup."
- msgstr ""
- #: gnu/packages/perl.scm:7279
- msgid "Postmodern object system for Perl 5"
- msgstr ""
- #: gnu/packages/perl.scm:7281
- msgid ""
- "Moose is a complete object system for Perl 5. It provides keywords for\n"
- "attribute declaration, object construction, inheritance, and maybe more. With\n"
- "Moose, you define your class declaratively, without needing to know about\n"
- "blessed hashrefs, accessor methods, and so on. You can concentrate on the\n"
- "logical structure of your classes, focusing on \"what\" rather than \"how\".\n"
- "A class definition with Moose reads like a list of very concise English\n"
- "sentences."
- msgstr ""
- #: gnu/packages/perl.scm:7308
- msgid "Emulate Class::Accessor::Fast behavior using Moose attributes"
- msgstr ""
- #: gnu/packages/perl.scm:7309
- msgid ""
- "This module attempts to emulate the behavior of\n"
- "Class::Accessor::Fast as accurately as possible using the Moose attribute\n"
- "system. The public API of Class::Accessor::Fast is wholly supported, but the\n"
- "private methods are not."
- msgstr ""
- #: gnu/packages/perl.scm:7341
- msgid "Moose role for processing command line options"
- msgstr ""
- #: gnu/packages/perl.scm:7342
- msgid ""
- "This is a Moose role which provides an alternate constructor\n"
- "for creating objects using parameters passed in from the command line."
- msgstr ""
- #: gnu/packages/perl.scm:7362
- msgid "Mark overload code symbols as methods"
- msgstr ""
- #: gnu/packages/perl.scm:7363
- msgid ""
- "MooseX::MarkAsMethods allows one to easily mark certain\n"
- "functions as Moose methods. This will allow other packages such as\n"
- "namespace::autoclean to operate without blowing away your overloads. After\n"
- "using MooseX::MarkAsMethods your overloads will be recognized by Class::MOP as\n"
- "being methods, and class extension as well as composition from roles with\n"
- "overloads will \"just work\"."
- msgstr ""
- #: gnu/packages/perl.scm:7389
- msgid "Code attribute introspection"
- msgstr ""
- #: gnu/packages/perl.scm:7390
- msgid ""
- "This module allows code attributes of methods to be\n"
- "introspected using Moose meta method objects."
- msgstr ""
- #: gnu/packages/perl.scm:7413
- msgid "Subclassing of non-Moose classes"
- msgstr ""
- #: gnu/packages/perl.scm:7414
- msgid ""
- "MooseX::NonMoose allows for easily subclassing non-Moose\n"
- "classes with Moose, taking care of the details connected with doing this, such\n"
- "as setting up proper inheritance from Moose::Object and installing (and\n"
- "inlining, at make_immutable time) a constructor that makes sure things like\n"
- "BUILD methods are called. It tries to be as non-intrusive as possible."
- msgstr ""
- #: gnu/packages/perl.scm:7439
- msgid "Extension of Params::Validate using Moose's types"
- msgstr ""
- #: gnu/packages/perl.scm:7440
- msgid ""
- "This module fills a gap in Moose by adding method parameter\n"
- "validation to Moose."
- msgstr ""
- #: gnu/packages/perl.scm:7460
- msgid "Apply roles to a related Perl class"
- msgstr ""
- #: gnu/packages/perl.scm:7461
- msgid ""
- "This module applies roles to make a subclass instead of\n"
- "manually setting up a subclass."
- msgstr ""
- #: gnu/packages/perl.scm:7484
- msgid "Moose roles with composition parameters"
- msgstr ""
- #: gnu/packages/perl.scm:7485
- msgid ""
- "Because Moose roles serve many different masters, they\n"
- "usually provide only the least common denominator of functionality. To\n"
- "empower roles further, more configurability than -alias and -excludes is\n"
- "required. Perhaps your role needs to know which method to call when it is\n"
- "done processing, or what default value to use for its url attribute.\n"
- "Parameterized roles offer a solution to these (and other) kinds of problems."
- msgstr ""
- #: gnu/packages/perl.scm:7509
- msgid "Roles which support overloading"
- msgstr ""
- #: gnu/packages/perl.scm:7510
- msgid ""
- "MooseX::Role::WithOverloading allows you to write a\n"
- "Moose::Role which defines overloaded operators and allows those overload\n"
- "methods to be composed into the classes/roles/instances it's compiled to,\n"
- "where plain Moose::Roles would lose the overloading."
- msgstr ""
- #: gnu/packages/perl.scm:7532
- msgid "Name your accessors foo() and set_foo()"
- msgstr ""
- #: gnu/packages/perl.scm:7533
- msgid ""
- "This module does not provide any methods. Simply loading it\n"
- "changes the default naming policy for the loading class so that accessors are\n"
- "separated into get and set methods. The get methods have the same name as the\n"
- "accessor, while set methods are prefixed with \"_set_\"."
- msgstr ""
- #: gnu/packages/perl.scm:7557
- msgid "Strict object constructors for Moose"
- msgstr ""
- #: gnu/packages/perl.scm:7558
- msgid ""
- "Simply loading this module makes your constructors\n"
- "\"strict\". If your constructor is called with an attribute init argument\n"
- "that your class does not declare, then it calls Moose->throw_error()."
- msgstr ""
- #: gnu/packages/perl.scm:7583
- msgid "Trait loading and resolution for Moose"
- msgstr ""
- #: gnu/packages/perl.scm:7584
- msgid ""
- "Adds support on top of MooseX::Traits for class precedence\n"
- "search for traits and some extra attributes."
- msgstr ""
- #: gnu/packages/perl.scm:7606
- msgid "Organise your Moose types in libraries"
- msgstr ""
- #: gnu/packages/perl.scm:7607
- msgid ""
- "This package lets you declare types using short names, but\n"
- "behind the scenes it namespaces all your type declarations, effectively\n"
- "prevent name clashes between packages."
- msgstr ""
- #: gnu/packages/perl.scm:7636
- msgid "DateTime related constraints and coercions for Moose"
- msgstr ""
- #: gnu/packages/perl.scm:7637
- msgid ""
- "This module packages several Moose::Util::TypeConstraints\n"
- "with coercions, designed to work with the DateTime suite of objects."
- msgstr ""
- #: gnu/packages/perl.scm:7666
- msgid "Extensions to MooseX::Types::DateTime"
- msgstr ""
- #: gnu/packages/perl.scm:7667
- msgid ""
- "This module builds on MooseX::Types::DateTime to add\n"
- "additional custom types and coercions. Since it builds on an existing type,\n"
- "all coercions and constraints are inherited."
- msgstr ""
- #: gnu/packages/perl.scm:7690
- msgid "ClassName type constraints for Moose"
- msgstr ""
- #: gnu/packages/perl.scm:7691
- msgid ""
- "MooseX::Types::LoadableClass provides a ClassName type\n"
- "constraint with coercion to load the class."
- msgstr ""
- #: gnu/packages/perl.scm:7715
- msgid "Using Moo and MooX:: packages the most lazy way"
- msgstr ""
- #: gnu/packages/perl.scm:7716
- msgid "Contains the MooX and MooX::Role packages."
- msgstr ""
- #: gnu/packages/perl.scm:7741
- msgid "Giving an easy Moo style way to make command organized CLI apps"
- msgstr ""
- #: gnu/packages/perl.scm:7742
- msgid ""
- "This package eases the writing of command line utilities,\n"
- "accepting commands and subcommands and so on. These commands can form a tree,\n"
- "which is mirrored in the package structure. On invocation, each command along\n"
- "the path through the tree (starting from the top-level command through to the\n"
- "most specific one) is instantiated."
- msgstr ""
- #: gnu/packages/perl.scm:7773
- msgid "Moo eXtension for initializing objects from config file"
- msgstr ""
- #: gnu/packages/perl.scm:7774
- msgid ""
- "This module is intended to easily load initialization values\n"
- "for attributes on object construction from an appropriate config file. The\n"
- "building is done in @code{MooX::ConfigFromFile::Role}---using\n"
- "@code{MooX::ConfigFromFile} ensures that the role is applied."
- msgstr ""
- #: gnu/packages/perl.scm:7795
- msgid "Moo eXtension for @code{File::ConfigDir}"
- msgstr ""
- #: gnu/packages/perl.scm:7796
- msgid ""
- "This module is a helper for easily finding configuration\n"
- "file locations. This information can be used to find a suitable place for\n"
- "installing configuration files or for finding any piece of settings."
- msgstr ""
- #: gnu/packages/perl.scm:7824
- msgid "NativeTrait-like behavior for Moo"
- msgstr ""
- #: gnu/packages/perl.scm:7826
- msgid ""
- "@code{MooX::HandlesVia} is an extension of Moo's @code{handles}\n"
- "attribute functionality. It provides a means of proxying functionality from\n"
- "an external class to the given attribute."
- msgstr ""
- #: gnu/packages/perl.scm:7851
- msgid "Easily translate Moose code to Moo"
- msgstr ""
- #: gnu/packages/perl.scm:7853
- msgid ""
- "MooX::late does the following:\n"
- "@enumerate\n"
- "@item Supports isa => $stringytype\n"
- "@item Supports does => $rolename\n"
- "@item Supports lazy_build => 1\n"
- "@item Exports blessed and confess functions to your namespace.\n"
- "@item Handles certain attribute traits\n"
- "Currently Hash, Array and Code are supported. This feature requires\n"
- "MooX::HandlesVia.\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/perl.scm:7908
- msgid "Explicit Options eXtension for Object Class"
- msgstr ""
- #: gnu/packages/perl.scm:7909
- msgid ""
- "Create a command line tool with your Mo, Moo, Moose objects.\n"
- "You have an @code{option} keyword to replace the usual @code{has} to\n"
- "explicitly use your attribute on the command line. The @code{option} keyword\n"
- "takes additional parameters and uses @code{Getopt::Long::Descriptive} to\n"
- "generate a command line tool."
- msgstr ""
- #: gnu/packages/perl.scm:7936
- msgid "Make Moo-based object constructors blow up on unknown attributes"
- msgstr ""
- #: gnu/packages/perl.scm:7938
- msgid ""
- "Loading @code{MooX::StrictConstructor} makes your constructors \"strict\".\n"
- "If your constructor is called with an attribute init argument that your class\n"
- "does not declare, then it dies."
- msgstr ""
- #: gnu/packages/perl.scm:7960
- msgid "Moosish types and type builder"
- msgstr ""
- #: gnu/packages/perl.scm:7961
- msgid ""
- "MooX::Types::MooseLike provides a possibility to build your\n"
- "own set of Moose-like types. These custom types can then be used to describe\n"
- "fields in Moo-based classes."
- msgstr ""
- #: gnu/packages/perl.scm:7990
- msgid "Fast Moose-compatible object system for perl5"
- msgstr ""
- #: gnu/packages/perl.scm:7992
- msgid ""
- "Mouse is a @code{Moose} compatible object system that implements a\n"
- "subset of the functionality for reduced startup time."
- msgstr ""
- #: gnu/packages/perl.scm:8013
- msgid "Extend attribute interfaces for Mouse"
- msgstr ""
- #: gnu/packages/perl.scm:8015
- msgid ""
- "While @code{Mouse} attributes provide a way to name your accessors,\n"
- "readers, writers, clearers and predicates, @code{MouseX::NativeTraits}\n"
- "provides commonly used attribute helper methods for more specific types\n"
- "of data."
- msgstr ""
- #: gnu/packages/perl.scm:8035
- msgid "Mozilla's CA cert bundle in PEM format"
- msgstr ""
- #: gnu/packages/perl.scm:8036
- msgid ""
- "@code{Mozilla::CA} provides a copy of Mozilla's bundle of\n"
- "Certificate Authority certificates in a form that can be consumed by modules\n"
- "and libraries based on OpenSSL."
- msgstr ""
- #: gnu/packages/perl.scm:8060
- msgid "Disable multidimensional array emulation"
- msgstr ""
- #: gnu/packages/perl.scm:8062
- msgid "Multidimensional disables multidimensional array emulation."
- msgstr ""
- #: gnu/packages/perl.scm:8079
- msgid "MRO interface compatibility for Perls < 5.9.5"
- msgstr ""
- #: gnu/packages/perl.scm:8080
- msgid ""
- "The \"mro\" namespace provides several utilities for dealing\n"
- "with method resolution order and method caching in general in Perl 5.9.5 and\n"
- "higher. This module provides those interfaces for earlier versions of\n"
- "Perl (back to 5.6.0)."
- msgstr ""
- #: gnu/packages/perl.scm:8103
- msgid "Keep imports out of your namespace"
- msgstr ""
- #: gnu/packages/perl.scm:8104
- msgid ""
- "The namespace::autoclean pragma will remove all imported\n"
- "symbols at the end of the current package's compile cycle. Functions called\n"
- "in the package itself will still be bound by their name, but they won't show\n"
- "up as methods on your class or instances. It is very similar to\n"
- "namespace::clean, except it will clean all imported functions, no matter if\n"
- "you imported them before or after you used the pragma. It will also not touch\n"
- "anything that looks like a method."
- msgstr ""
- #: gnu/packages/perl.scm:8129
- msgid "Keep imports and functions out of your namespace"
- msgstr ""
- #: gnu/packages/perl.scm:8130
- msgid ""
- "The namespace::clean pragma will remove all previously\n"
- "declared or imported symbols at the end of the current package's compile\n"
- "cycle. Functions called in the package itself will still be bound by their\n"
- "name, but they won't show up as methods on your class or instances."
- msgstr ""
- #: gnu/packages/perl.scm:8148
- msgid "Object-oriented API to the BGP protocol"
- msgstr ""
- #: gnu/packages/perl.scm:8150
- msgid ""
- "This module is an implementation of the BGP-4 inter-domain routing protocol.\n"
- "It encapsulates all of the functionality needed to establish and maintain a\n"
- "BGP peering session and exchange routing update information with the peer.\n"
- "It aims to provide a simple API to the BGP protocol for the purposes of\n"
- "automation, logging, monitoring, testing, and similar tasks using the\n"
- "power and flexibility of perl. The module does not implement the\n"
- "functionality of a RIB (Routing Information Base) nor does it modify the\n"
- "kernel routing table of the host system. However, such operations could be\n"
- "implemented using the API provided by the module."
- msgstr ""
- #: gnu/packages/perl.scm:8175
- msgid "Non-blocking system DNS resolver"
- msgstr ""
- #: gnu/packages/perl.scm:8177
- msgid ""
- "This class provides several methods for host name resolution. It is\n"
- "designed to be used with event loops. Names are resolved by your system's\n"
- "native @code{getaddrinfo(3)} implementation, called in a separate thread to\n"
- "avoid blocking the entire application. Threading overhead is limited by using\n"
- "system threads instead of Perl threads."
- msgstr ""
- #: gnu/packages/perl.scm:8199
- msgid "Internationalizing Domain Names in Applications (IDNA)"
- msgstr ""
- #: gnu/packages/perl.scm:8201
- msgid ""
- "Internationalized Domain Names (IDNs) use characters drawn from a large\n"
- "repertoire (Unicode), but IDNA allows the non-ASCII characters to be\n"
- "represented using only the ASCII characters already allowed in so-called host\n"
- "names today (letter-digit-hyphen, /[A-Z0-9-]/i).\n"
- "\n"
- "Use this module if you just want to convert domain names (or email addresses),\n"
- "using whatever IDNA standard is the best choice at the moment."
- msgstr ""
- #: gnu/packages/perl.scm:8227
- msgid "Perl client for Etsy's statsd daemon"
- msgstr ""
- #: gnu/packages/perl.scm:8228
- msgid ""
- "This module implement a UDP client for the statsd statistics\n"
- "collector daemon in use at Etsy.com."
- msgstr ""
- #: gnu/packages/perl.scm:8246
- msgid "Numeric comparisons"
- msgstr ""
- #: gnu/packages/perl.scm:8247
- msgid ""
- "Number::Compare compiles a simple comparison to an anonymous\n"
- "subroutine, which you can call with a value to be tested against."
- msgstr ""
- #: gnu/packages/perl.scm:8265
- msgid "Convert numbers to strings with pretty formatting"
- msgstr ""
- #: gnu/packages/perl.scm:8266
- msgid ""
- "@code{Number::Format} is a library for formatting numbers.\n"
- "Functions are provided for converting numbers to strings in a variety of ways,\n"
- "and to convert strings that contain numbers back into numeric form. The\n"
- "output formats may include thousands separators - characters inserted between\n"
- "each group of three characters counting right to left from the decimal point.\n"
- "The characters used for the decimal point and the thousands separator come from\n"
- "the locale information or can be specified by the user."
- msgstr ""
- #: gnu/packages/perl.scm:8290
- msgid "Perl extension defining ranges of numbers"
- msgstr ""
- #: gnu/packages/perl.scm:8291
- msgid ""
- "Number::Range is an object-oriented interface to test if a\n"
- "number exists in a given range, and to be able to manipulate the range."
- msgstr ""
- #: gnu/packages/perl.scm:8310
- msgid "Generate cryptographic signatures for objects"
- msgstr ""
- #: gnu/packages/perl.scm:8311
- msgid ""
- "Object::Signature is an abstract base class that you can\n"
- "inherit from in order to allow your objects to generate unique cryptographic\n"
- "signatures."
- msgstr ""
- #: gnu/packages/perl.scm:8332
- msgid "Read and write OLE storage files"
- msgstr ""
- #: gnu/packages/perl.scm:8333
- msgid ""
- "This module allows you to read and write\n"
- "an OLE-Structured file. @dfn{OLE} (Object Linking and Embedding) is a\n"
- "technology to store hierarchical information such as links to other\n"
- "documents within a single file."
- msgstr ""
- #: gnu/packages/perl.scm:8390
- msgid "Perl bindings to the OpenGL API, GLU, and GLUT/FreeGLUT"
- msgstr ""
- #: gnu/packages/perl.scm:8391
- msgid ""
- "The package provides Perl bindings to OpenGL, GLU\n"
- "and FreeGLUT."
- msgstr ""
- #: gnu/packages/perl.scm:8411
- msgid "Anonymous packages"
- msgstr ""
- #: gnu/packages/perl.scm:8412
- msgid ""
- "This module allows for anonymous packages that are\n"
- "independent of the main namespace and only available through an object\n"
- "instance, not by name."
- msgstr ""
- #: gnu/packages/perl.scm:8436
- msgid "Manage deprecation warnings for your distribution"
- msgstr ""
- #: gnu/packages/perl.scm:8437
- msgid ""
- "This module allows you to manage a set of deprecations for\n"
- "one or more modules."
- msgstr ""
- #: gnu/packages/perl.scm:8460
- msgid "Routines for manipulating stashes"
- msgstr ""
- #: gnu/packages/perl.scm:8461
- msgid ""
- "Manipulating stashes (Perl's symbol tables) is occasionally\n"
- "necessary, but incredibly messy, and easy to get wrong. This module hides all\n"
- "of that behind a simple API."
- msgstr ""
- #: gnu/packages/perl.scm:8481
- msgid "Faster implementation of the Package::Stash API"
- msgstr ""
- #: gnu/packages/perl.scm:8482
- msgid ""
- "This is a backend for Package::Stash, which provides the\n"
- "functionality in a way that's less buggy and much faster. It will be used by\n"
- "default if it's installed, and should be preferred in all environments with a\n"
- "compiler."
- msgstr ""
- #: gnu/packages/perl.scm:8501
- msgid "Play with other peoples' lexical variables"
- msgstr ""
- #: gnu/packages/perl.scm:8502
- msgid ""
- "PadWalker is a module which allows you to inspect (and even\n"
- "change) lexical variables in any subroutine which called you. It will only\n"
- "show those variables which are in scope at the point of the call. PadWalker\n"
- "is particularly useful for debugging."
- msgstr ""
- #: gnu/packages/perl.scm:8526
- msgid "Simple parallel processing fork manager"
- msgstr ""
- #: gnu/packages/perl.scm:8527
- msgid ""
- "@code{Parallel::ForkManager} is intended for use in\n"
- "operations that can be done in parallel where the number of\n"
- "processes to be forked off should be limited."
- msgstr ""
- #: gnu/packages/perl.scm:8551
- msgid "Argument type classification"
- msgstr ""
- #: gnu/packages/perl.scm:8552
- msgid ""
- "This module provides various type-testing functions.\n"
- "These are intended for functions that care what type of data they are\n"
- "operating on. There are two flavours of function. Functions of the\n"
- "first flavour provide type classification only. Functions of the\n"
- "second flavour also check that an argument is of an expected type.\n"
- "The type enforcement functions handle only the simplest requirements\n"
- "for arguments of the types handled by the classification functions.\n"
- "Enforcement of more complex types may be built using the\n"
- "classification functions, or it may be more convenient to use a module\n"
- "designed for the more complex job, such as @code{Params::Validate}"
- msgstr ""
- #: gnu/packages/perl.scm:8579
- msgid "Simple, compact and correct param-checking functions"
- msgstr ""
- #: gnu/packages/perl.scm:8581
- msgid ""
- "Params::Util provides a basic set of importable functions that makes\n"
- "checking parameters easier."
- msgstr ""
- #: gnu/packages/perl.scm:8603
- msgid "Validate method/function parameters"
- msgstr ""
- #: gnu/packages/perl.scm:8604
- msgid ""
- "The Params::Validate module allows you to validate method or\n"
- "function call parameters to an arbitrary level of specificity."
- msgstr ""
- #: gnu/packages/perl.scm:8627
- msgid "Build an optimized subroutine parameter validator"
- msgstr ""
- #: gnu/packages/perl.scm:8628
- msgid ""
- "This module creates a customized, highly efficient\n"
- "parameter checking subroutine. It can handle named or positional\n"
- "parameters, and can return the parameters as key/value pairs or a list\n"
- "of values. In addition to type checks, it also supports parameter\n"
- "defaults, optional parameters, and extra \"slurpy\" parameters."
- msgstr ""
- #: gnu/packages/perl.scm:8649
- msgid "Create and manipulate PAR distributions"
- msgstr ""
- #: gnu/packages/perl.scm:8650
- msgid ""
- "PAR::Dist is a toolkit to create and manipulate PAR\n"
- "distributions."
- msgstr ""
- #: gnu/packages/perl.scm:8672
- msgid "Path specification manipulation"
- msgstr ""
- #: gnu/packages/perl.scm:8673
- msgid ""
- "Path::Class is a module for manipulation of file and\n"
- "directory specifications in a cross-platform manner."
- msgstr ""
- #: gnu/packages/perl.scm:8703
- msgid "Tools for working with directory and file names"
- msgstr ""
- #: gnu/packages/perl.scm:8704
- msgid ""
- "This package provides functions to work with directory and\n"
- "file names."
- msgstr ""
- #: gnu/packages/perl.scm:8728
- msgid "File path utility"
- msgstr ""
- #: gnu/packages/perl.scm:8729
- msgid ""
- "This module provides a small, fast utility for working\n"
- "with file paths."
- msgstr ""
- #: gnu/packages/perl.scm:8751
- msgid "Facilitates the creation and modification of PDF files"
- msgstr ""
- #: gnu/packages/perl.scm:8752
- msgid ""
- "This Perl module facilitates the creation and modification\n"
- "of PDF files."
- msgstr ""
- #: gnu/packages/perl.scm:8773
- msgid "Fast and correct UTF-8 IO"
- msgstr ""
- #: gnu/packages/perl.scm:8774
- msgid ""
- "@code{PerlIO::utf8_strict} provides a fast and correct UTF-8\n"
- "PerlIO layer. Unlike Perl's default @code{:utf8} layer it checks the input\n"
- "for correctness."
- msgstr ""
- #: gnu/packages/perl.scm:8796
- msgid "Acmeist PEG Parser Framework"
- msgstr ""
- #: gnu/packages/perl.scm:8797
- msgid ""
- "Pegex is an Acmeist parser framework. It allows you to easily\n"
- "create parsers that will work equivalently in lots of programming languages.\n"
- "The inspiration for Pegex comes from the parsing engine upon which the\n"
- "postmodern programming language Perl 6 is based on. Pegex brings this beauty\n"
- "to the other justmodern languages that have a normal regular expression engine\n"
- "available."
- msgstr ""
- #: gnu/packages/perl.scm:8821
- msgid "Check for comprehensive documentation of a module"
- msgstr ""
- #: gnu/packages/perl.scm:8822
- msgid ""
- "This module provides a mechanism for determining if the pod\n"
- "for a given module is comprehensive."
- msgstr ""
- #: gnu/packages/perl.scm:8840
- msgid "Modules for parsing/translating POD format documents"
- msgstr ""
- #: gnu/packages/perl.scm:8842
- msgid ""
- "@code{Pod::Parser} is a base class for creating POD filters and\n"
- "translators. It handles most of the effort involved with parsing the POD\n"
- "sections from an input stream, leaving subclasses free to be concerned only\n"
- "with performing the actual translation of text.\n"
- "\n"
- "@emph{NOTE}: This module is considered legacy. New projects should prefer\n"
- "@code{Pod::Simple} instead."
- msgstr ""
- #: gnu/packages/perl.scm:8864
- msgid "Parsing library for text in Pod format"
- msgstr ""
- #: gnu/packages/perl.scm:8865
- msgid ""
- "@code{Pod::Simple} is a Perl library for parsing text in\n"
- "the @dfn{Pod} (plain old documentation) markup language that is typically\n"
- "used for writing documentation for Perl and for Perl modules."
- msgstr ""
- #: gnu/packages/perl.scm:8887
- msgid "Formatter for spellchecking Pod"
- msgstr ""
- #: gnu/packages/perl.scm:8889
- msgid ""
- "@code{Pod::Spell} is a Pod formatter whose output is good\n"
- "for spellchecking.\n"
- "\n"
- "@code{Pod::Spell} is rather like @code{Pod::Text}, except that it doesn't put\n"
- "much effort into actual formatting, and it suppresses things that look like Perl\n"
- "symbols or Perl jargon (so that your spellchecking program won't complain about\n"
- "mystery words like \"@code{$thing}\" or \"@code{Foo::Bar}\" or \"@code{hashref}\")."
- msgstr ""
- #: gnu/packages/perl.scm:8914
- msgid "GNU C library compatible strftime for loggers and servers"
- msgstr ""
- #: gnu/packages/perl.scm:8915
- msgid ""
- "POSIX::strftime::Compiler provides GNU C library compatible\n"
- "strftime(3). But this module is not affected by the system locale. This\n"
- "feature is useful when you want to write loggers, servers, and portable\n"
- "applications."
- msgstr ""
- #: gnu/packages/perl.scm:8941
- msgid "Parse, analyze and manipulate Perl (without Perl)"
- msgstr ""
- #: gnu/packages/perl.scm:8942
- msgid ""
- "The PPI module parses, analyzes and manipulates Perl\n"
- "code."
- msgstr ""
- #: gnu/packages/perl.scm:8962 gnu/packages/perl.scm:8986
- msgid "Parse Perl string literals and string-literal-like things"
- msgstr ""
- #: gnu/packages/perl.scm:8964
- msgid ""
- "The purpose of the @code{PPIx-Regexp} package is to parse\n"
- "regular expressions in a manner similar to the way the @code{PPI} package parses\n"
- "Perl. This class forms the root of the parse tree, playing a role similar to\n"
- "@code{PPI::Document}."
- msgstr ""
- #: gnu/packages/perl.scm:8988
- msgid ""
- "@code{PPIX::QuoteLike} parses Perl string literals and things that\n"
- "are reasonably like string literals. Its real reason for being is to find\n"
- "interpolated variables for @code{Perl::Critic} policies and similar code."
- msgstr ""
- #: gnu/packages/perl.scm:9010
- msgid "Extensions to PPI"
- msgstr ""
- #: gnu/packages/perl.scm:9012
- msgid ""
- "@code{PPIx::Utilities} is a collection of functions for dealing\n"
- "with @code{PPI} objects, many of which originated in @code{Perl::Critic}. They\n"
- "are organized into modules by the kind of @code{PPI} class they relate to, by\n"
- "replacing the \"@code{PPI}\" at the front of the module name with\n"
- "\"@code{PPIx::Utilities}\", e.g. functionality related to @code{PPI::Nodes} is\n"
- "in @code{PPIx::Utilities::Node}."
- msgstr ""
- #: gnu/packages/perl.scm:9032
- msgid "Information about the currently running perl"
- msgstr ""
- #: gnu/packages/perl.scm:9034
- msgid ""
- "Probe::Perl provides methods for obtaining information about the\n"
- "currently running perl interpreter. It originally began life as code in the\n"
- "Module::Build project, but has been externalized here for general use."
- msgstr ""
- #: gnu/packages/perl.scm:9061
- msgid "Interface to external editor from Perl"
- msgstr ""
- #: gnu/packages/perl.scm:9062
- msgid ""
- "This module provides the ability to supply some text to an\n"
- "external text editor, have it edited by the user, and retrieve the results."
- msgstr ""
- #: gnu/packages/perl.scm:9081
- msgid "Create read-only scalars, arrays, hashes"
- msgstr ""
- #: gnu/packages/perl.scm:9082
- msgid ""
- "This module provides a facility for creating non-modifiable\n"
- "variables in Perl. This is useful for configuration files, headers, etc. It\n"
- "can also be useful as a development and debugging tool for catching updates to\n"
- "variables that should not be changed."
- msgstr ""
- #: gnu/packages/perl.scm:9103
- msgid ""
- "Companion module for @code{Readonly.pm}, to speed up read-only\n"
- "scalar variables"
- msgstr ""
- #: gnu/packages/perl.scm:9106
- msgid ""
- "The @code{Readonly} module is an effective way to create non-modifiable\n"
- "variables. However, it's relatively slow.\n"
- "\n"
- "The reason it's slow is that is implements the read-only-ness of variables via\n"
- "tied objects. This mechanism is inherently slow. Perl simply has to do a lot\n"
- "of work under the hood to make tied variables work.\n"
- "\n"
- "This module corrects the speed problem, at least with respect to scalar\n"
- "variables. When @code{Readonly::XS} is installed, @code{Readonly} uses it to\n"
- "access the internals of scalar variables. Instead of creating a scalar variable\n"
- "object and tying it, @code{Readonly} simply flips the @code{SvREADONLY} bit in\n"
- "the scalar's @code{FLAGS} structure."
- msgstr ""
- #: gnu/packages/perl.scm:9134
- msgid "XS implementation for Ref::Util"
- msgstr ""
- #: gnu/packages/perl.scm:9135
- msgid ""
- "@code{Ref::Util::XS} is the XS implementation of\n"
- "@code{Ref::Util}, which provides several functions to help identify references\n"
- "in a more convenient way than the usual approach of examining the return value\n"
- "of @code{ref}."
- msgstr ""
- #: gnu/packages/perl.scm:9153
- msgid "Provide commonly requested regular expressions"
- msgstr ""
- #: gnu/packages/perl.scm:9155
- msgid ""
- "This module exports a single hash (@code{%RE}) that stores or generates\n"
- "commonly needed regular expressions. Patterns currently provided include:\n"
- "balanced parentheses and brackets, delimited text (with escapes), integers and\n"
- "floating-point numbers in any base (up to 36), comments in 44 languages,\n"
- "offensive language, lists of any pattern, IPv4 addresses, URIs, and Zip\n"
- "codes."
- msgstr ""
- #: gnu/packages/perl.scm:9180
- msgid "Complete recursive descent parser on Perl's regex engine"
- msgstr ""
- #: gnu/packages/perl.scm:9182
- msgid ""
- "The @code{Regexp::Grammars} module adds a small number of new\n"
- "regex constructs that can be used within Perl 5.10 patterns to implement\n"
- "complete recursive-descent parsing. It allows you to go beyond matching\n"
- "complex, nested and recursive structures, and allows you to parse and extract\n"
- "hierarchical data from it."
- msgstr ""
- #: gnu/packages/perl.scm:9203
- msgid "Selection of general-utility regexp subroutines"
- msgstr ""
- #: gnu/packages/perl.scm:9204
- msgid ""
- "This package provides a selection of regular expression\n"
- "subroutines including @code{is_regexp}, @code{regexp_seen_evals},\n"
- "@code{regexp_is_foreign}, @code{regexp_is_anchored}, @code{serialize_regexp},\n"
- "and @code{deserialize_regexp}."
- msgstr ""
- #: gnu/packages/perl.scm:9228
- msgid "Roles, as a slice of Moose"
- msgstr ""
- #: gnu/packages/perl.scm:9229
- msgid "Role::Tiny is a minimalist role composition tool."
- msgstr ""
- #: gnu/packages/perl.scm:9259
- msgid "Call isa, can, does, and DOES safely"
- msgstr ""
- #: gnu/packages/perl.scm:9260
- msgid ""
- "This module allows you to call isa, can, does, and DOES\n"
- "safely on things that may not be objects."
- msgstr ""
- #: gnu/packages/perl.scm:9281
- msgid "String aspects of scalars"
- msgstr ""
- #: gnu/packages/perl.scm:9282
- msgid ""
- "@code{Scalar::String} is about the string part of\n"
- "plain Perl scalars. A scalar has a string value, which is notionally\n"
- "a sequence of Unicode codepoints but may be internally encoded in\n"
- "either ISO-8859-1 or UTF-8. In places, more so in older versions of\n"
- "Perl, the internal encoding shows through. To fully understand Perl\n"
- "strings it is necessary to understand these implementation details.\n"
- "This module provides functions to classify a string by encoding and to\n"
- "encode a string in a desired way. The module is implemented in XS,\n"
- "with a pure Perl backup version for systems that cannot handle XS."
- msgstr ""
- #: gnu/packages/perl.scm:9307
- msgid "Lexically-scoped resource management"
- msgstr ""
- #: gnu/packages/perl.scm:9308
- msgid ""
- "This module provides a convenient way to perform cleanup or\n"
- "other forms of resource management at the end of a scope. It is particularly\n"
- "useful when dealing with exceptions: the Scope::Guard constructor takes a\n"
- "reference to a subroutine that is guaranteed to be called even if the thread\n"
- "of execution is aborted prematurely. This effectively allows lexically-scoped\n"
- "\"promises\" to be made that are automatically honoured by perl's garbage\n"
- "collector."
- msgstr ""
- #: gnu/packages/perl.scm:9331
- msgid "Infinite sets"
- msgstr ""
- #: gnu/packages/perl.scm:9332
- msgid "Set::Infinite is a set theory module for infinite sets."
- msgstr ""
- #: gnu/packages/perl.scm:9351
- msgid "Perform range-based lookups on sets of ranges"
- msgstr ""
- #: gnu/packages/perl.scm:9352
- msgid ""
- "This package provides an efficient mechanism to look up\n"
- "ranges in Interval Trees."
- msgstr ""
- #: gnu/packages/perl.scm:9370
- msgid "Manage sets of integers"
- msgstr ""
- #: gnu/packages/perl.scm:9371
- msgid ""
- "@code{Set::IntSpan} manages sets of integers. It is\n"
- "optimized for sets that have long runs of consecutive integers."
- msgstr ""
- #: gnu/packages/perl.scm:9390
- msgid "Unordered collections of Perl Objects"
- msgstr ""
- #: gnu/packages/perl.scm:9391
- msgid ""
- "Set::Object provides efficient sets, unordered collections\n"
- "of Perl objects without duplicates for scalars and references."
- msgstr ""
- #: gnu/packages/perl.scm:9409
- msgid "Set operations for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:9410
- msgid ""
- "The first priority of Set::Scalar is to be a convenient\n"
- "interface to sets (as in: unordered collections of Perl scalars). While not\n"
- "designed to be slow or big, neither has it been designed to be fast or\n"
- "compact."
- msgstr ""
- #: gnu/packages/perl.scm:9430
- msgid "Sort arrays by one or multiple calculated keys"
- msgstr ""
- #: gnu/packages/perl.scm:9431
- msgid ""
- "This Perl module provides various functions to quickly sort\n"
- "arrays by one or multiple calculated keys."
- msgstr ""
- #: gnu/packages/perl.scm:9449
- msgid "Sort lexically, but sort numeral parts numerically"
- msgstr ""
- #: gnu/packages/perl.scm:9450
- msgid ""
- "This module exports two functions, @code{nsort} and\n"
- "@code{ncmp}; they are used in implementing a \"natural sorting\" algorithm.\n"
- "Under natural sorting, numeric substrings are compared numerically, and other\n"
- "word-characters are compared lexically."
- msgstr ""
- #: gnu/packages/perl.scm:9478
- msgid "Classes for representing type constraints and coercion"
- msgstr ""
- #: gnu/packages/perl.scm:9479
- msgid ""
- "The Specio distribution provides classes for representing type\n"
- "constraints and coercion, along with syntax sugar for declaring them. Note that\n"
- "this is not a proper type system for Perl. Nothing in this distribution will\n"
- "magically make the Perl interpreter start checking a value's type on assignment\n"
- "to a variable. In fact, there's no built-in way to apply a type to a variable at\n"
- "all. Instead, you can explicitly check a value against a type, and optionally\n"
- "coerce values to that type."
- msgstr ""
- #: gnu/packages/perl.scm:9502
- msgid "Spiffy Perl Interface Framework For You"
- msgstr ""
- #: gnu/packages/perl.scm:9503
- msgid ""
- "Spiffy is a framework and methodology for doing object\n"
- "oriented (OO) programming in Perl. Spiffy combines the best parts of\n"
- "Exporter.pm, base.pm, mixin.pm and SUPER.pm into one magic foundation class.\n"
- "It attempts to fix all the nits and warts of traditional Perl OO, in a clean,\n"
- "straightforward and (perhaps someday) standard way. Spiffy borrows ideas from\n"
- "other OO languages like Python, Ruby, Java and Perl 6."
- msgstr ""
- #: gnu/packages/perl.scm:9525
- msgid "Generalization of wantarray"
- msgstr ""
- #: gnu/packages/perl.scm:9526
- msgid ""
- "This module generalises the mechanism of the\n"
- "@code{wantarray} function, allowing a function to determine in some detail how\n"
- "its return value is going to be immediately used."
- msgstr ""
- #: gnu/packages/perl.scm:9547
- msgid "Create context-sensitive return values"
- msgstr ""
- #: gnu/packages/perl.scm:9548
- msgid ""
- "This module provides a collection of named blocks that allow\n"
- "a return statement to return different values depending on the context in\n"
- "which it is called."
- msgstr ""
- #: gnu/packages/perl.scm:9569
- msgid "Collection of very basic statistics modules"
- msgstr ""
- #: gnu/packages/perl.scm:9570
- msgid ""
- "This package provides basic statistics functions like\n"
- "@code{median()}, @code{mean()}, @code{variance()} and @code{stddev()}."
- msgstr ""
- #: gnu/packages/perl.scm:9593
- msgid "Perl implementation of Principal Component Analysis"
- msgstr ""
- #: gnu/packages/perl.scm:9594
- msgid ""
- "This package provides the Statistics::PCA module, an\n"
- "implementation of @dfn{Principal Component Analysis} (PCA)."
- msgstr ""
- #: gnu/packages/perl.scm:9613
- msgid "Persistence for Perl data structures"
- msgstr ""
- #: gnu/packages/perl.scm:9614
- msgid ""
- "Storable brings persistence to your Perl data structures\n"
- "containing SCALAR, ARRAY, HASH or REF objects, i.e. anything that can be\n"
- "conveniently stored to disk and retrieved at a later time."
- msgstr ""
- #: gnu/packages/perl.scm:9633
- msgid "Temporary buffer to save bytes"
- msgstr ""
- #: gnu/packages/perl.scm:9634
- msgid ""
- "Stream::Buffered is a buffer class to store arbitrary length\n"
- "of byte strings and then get a seekable filehandle once everything is\n"
- "buffered. It uses PerlIO and/or temporary file to save the buffer depending\n"
- "on the length of the size."
- msgstr ""
- #: gnu/packages/perl.scm:9654
- msgid "Turn on strict and make all warnings fatal"
- msgstr ""
- #: gnu/packages/perl.scm:9655
- msgid ""
- "Strictures turns on strict and make all warnings fatal when\n"
- "run from within a source-controlled directory."
- msgstr ""
- #: gnu/packages/perl.scm:9695
- msgid "Camelcase and de-camelcase"
- msgstr ""
- #: gnu/packages/perl.scm:9696
- msgid ""
- "This module may be used to convert from under_score text to\n"
- "CamelCase and back again."
- msgstr ""
- #: gnu/packages/perl.scm:9715
- msgid "Backslash escapes, quoted phrase, word elision, etc."
- msgstr ""
- #: gnu/packages/perl.scm:9716
- msgid ""
- "This module provides a flexible calling interface to some\n"
- "frequently-performed string conversion functions, including applying and\n"
- "expanding standard C/Unix-style backslash escapes like \n"
- " and \t, wrapping and\n"
- "removing double-quotes, and truncating to fit within a desired length."
- msgstr ""
- #: gnu/packages/perl.scm:9736
- msgid "Format sprintf-like strings with arbitrary format definitions"
- msgstr ""
- #: gnu/packages/perl.scm:9738
- msgid ""
- "@code{String::Format} lets you define arbitrary printf-like format\n"
- "sequences to be expanded. This module would be most useful in configuration\n"
- "files and reporting tools, where the results of a query need to be formatted in\n"
- "a particular way. It was inspired by\n"
- "@url{http://www.mutt.org/doc/manual/manual.html#index-format,mutt's\n"
- "@code{index_format} and related directives}."
- msgstr ""
- #: gnu/packages/perl.scm:9764
- msgid "Build your own sprintf-like functions"
- msgstr ""
- #: gnu/packages/perl.scm:9766
- msgid ""
- "@code{String::Formatter} is a tool for building sprintf-like formatting\n"
- "routines. It supports named or positional formatting, custom conversions,\n"
- "fixed string interpolation, and simple width-matching."
- msgstr ""
- #: gnu/packages/perl.scm:9787
- msgid "Rewrite strings based on a set of known prefixes"
- msgstr ""
- #: gnu/packages/perl.scm:9788
- msgid ""
- "This module allows you to rewrite strings based on a set of\n"
- "known prefixes."
- msgstr ""
- #: gnu/packages/perl.scm:9808
- msgid "Quote strings for passing through a shell"
- msgstr ""
- #: gnu/packages/perl.scm:9810
- msgid ""
- "@code{shell-quote} lets you pass arbitrary strings through the shell so\n"
- "that they won't be changed."
- msgstr ""
- #: gnu/packages/perl.scm:9829
- msgid "String printing alternatives to printf"
- msgstr ""
- #: gnu/packages/perl.scm:9831
- msgid ""
- "This module inserts values into (translated) strings. It provides\n"
- "@code{printf} and @code{sprintf} alternatives via both an object-oriented and\n"
- "a functional interface."
- msgstr ""
- #: gnu/packages/perl.scm:9853
- msgid "Sophisticated exporter for custom-built routines"
- msgstr ""
- #: gnu/packages/perl.scm:9855
- msgid ""
- "Sub::Exporter provides a sophisticated alternative to Exporter.pm for\n"
- "custom-built routines."
- msgstr ""
- #: gnu/packages/perl.scm:9874
- msgid "Only use Sub::Exporter if you need it"
- msgstr ""
- #: gnu/packages/perl.scm:9875
- msgid ""
- "Sub::Exporter is an incredibly powerful module, but with\n"
- "that power comes great responsibility, as well as some runtime penalties.\n"
- "This module is a \"Sub::Exporter\" wrapper that will let your users just use\n"
- "Exporter if all they are doing is picking exports, but use \"Sub::Exporter\"\n"
- "if your users try to use \"Sub::Exporter\"'s more advanced features, like\n"
- "renaming exports, if they try to use them."
- msgstr ""
- #: gnu/packages/perl.scm:9897
- msgid "Retrieve names of code references"
- msgstr ""
- #: gnu/packages/perl.scm:9898
- msgid ""
- "Sub::Identify allows you to retrieve the real name of code\n"
- "references."
- msgstr ""
- #: gnu/packages/perl.scm:9918
- msgid "Tool to inspect subroutines"
- msgstr ""
- #: gnu/packages/perl.scm:9919
- msgid ""
- "This package provides tools for inspecting subroutines\n"
- "in Perl."
- msgstr ""
- #: gnu/packages/perl.scm:9938
- msgid "Install subroutines into packages easily"
- msgstr ""
- #: gnu/packages/perl.scm:9940
- msgid ""
- "Sub::Install makes it easy to install subroutines into packages without\n"
- "the unsightly mess of C<no strict> or typeglobs lying about where just anyone\n"
- "can see them."
- msgstr ""
- #: gnu/packages/perl.scm:9961
- msgid "(Re)name a sub"
- msgstr ""
- #: gnu/packages/perl.scm:9962
- msgid ""
- "Assigns a new name to referenced sub. If package\n"
- "specification is omitted in the name, then the current package is used. The\n"
- "return value is the sub."
- msgstr ""
- #: gnu/packages/perl.scm:9985
- msgid "Efficient generation of subroutines via string eval"
- msgstr ""
- #: gnu/packages/perl.scm:9986
- msgid ""
- "Sub::Quote provides an efficient generation of subroutines\n"
- "via string eval."
- msgstr ""
- #: gnu/packages/perl.scm:10004
- msgid "Apparently run a function in a higher stack frame"
- msgstr ""
- #: gnu/packages/perl.scm:10005
- msgid ""
- "Like Tcl's uplevel() function, but not quite so dangerous.\n"
- "The idea is just to fool caller(). All the really naughty bits of Tcl's\n"
- "uplevel() are avoided."
- msgstr ""
- #: gnu/packages/perl.scm:10027
- msgid "Control superclass method dispatching"
- msgstr ""
- #: gnu/packages/perl.scm:10029
- msgid ""
- "When subclassing a class, you may occasionally want to dispatch control to\n"
- "the superclass---at least conditionally and temporarily. This module provides\n"
- "nicer equivalents to the native Perl syntax for calling superclasses, along with\n"
- "a universal @code{super} method to determine a class' own superclass, and better\n"
- "support for run-time mix-ins and roles."
- msgstr ""
- #: gnu/packages/perl.scm:10049
- msgid "Perl extension for generating SVG documents"
- msgstr ""
- #: gnu/packages/perl.scm:10050
- msgid ""
- "SVG is a Perl module which generates a nested data structure\n"
- "containing the DOM representation of an SVG (Scalable Vector Graphics) image.\n"
- "Using SVG, you can generate SVG objects, embed other SVG instances into it,\n"
- "access the DOM object, create and access Javascript, and generate SMIL\n"
- "animation content."
- msgstr ""
- #: gnu/packages/perl.scm:10071
- msgid "Switch statement for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:10072
- msgid ""
- "Switch is a Perl module which implements a generalized case\n"
- "mechanism. The module augments the standard Perl syntax with two new\n"
- "statements: @code{switch} and @code{case}."
- msgstr ""
- #: gnu/packages/perl.scm:10093
- msgid "Try/catch/finally syntax for perl"
- msgstr ""
- #: gnu/packages/perl.scm:10095
- msgid ""
- "This module provides a syntax plugin that implements\n"
- "exception-handling semantics in a form familiar to users of other\n"
- "languages, being built on a block labeled with the @code{try} keyword,\n"
- "followed by at least one of a @code{catch} or @code{finally} block."
- msgstr ""
- #: gnu/packages/perl.scm:10143
- msgid "Perl extension for getting CPU information"
- msgstr ""
- #: gnu/packages/perl.scm:10145
- msgid ""
- "Sys::CPU is a module for counting the number of CPUs on a system, and\n"
- "determining their type and clock speed."
- msgstr ""
- #: gnu/packages/perl.scm:10165
- msgid "Get full hostname in Perl"
- msgstr ""
- #: gnu/packages/perl.scm:10166
- msgid ""
- "Sys::Hostname::Long tries very hard to get the full hostname\n"
- "of a system."
- msgstr ""
- #: gnu/packages/perl.scm:10185
- msgid "Access system calls that Perl doesn't normally provide access to"
- msgstr ""
- #: gnu/packages/perl.scm:10187
- msgid ""
- "Sys::Syscall allows one to use epoll and sendfile system calls from\n"
- "Perl. Support is mostly Linux-only for now, but other syscalls/OSes are\n"
- "planned for the future."
- msgstr ""
- #: gnu/packages/perl.scm:10215
- msgid "Ensure that a platform has weaken support"
- msgstr ""
- #: gnu/packages/perl.scm:10216
- msgid ""
- "One recurring problem in modules that use Scalar::Util's\n"
- "weaken function is that it is not present in the pure-perl variant. If\n"
- "Scalar::Util is not available at all, it will issue a normal dependency on the\n"
- "module. However, if Scalar::Util is relatively new ( it is >= 1.19 ) and the\n"
- "module does not have weaken, the install will bail out altogether with a long\n"
- "error encouraging the user to seek support."
- msgstr ""
- #: gnu/packages/perl.scm:10240
- msgid "Template processing system for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:10241
- msgid ""
- "The Template Toolkit is a collection of modules which\n"
- "implement an extensible template processing system. It was originally\n"
- "designed and remains primarily useful for generating dynamic web content, but\n"
- "it can be used equally well for processing any other kind of text based\n"
- "documents: HTML, XML, POD, PostScript, LaTeX, and so on."
- msgstr ""
- #: gnu/packages/perl.scm:10264
- msgid "Profiling for Template Toolkit"
- msgstr ""
- #: gnu/packages/perl.scm:10265
- msgid ""
- "Template::Timer provides inline profiling of the template\n"
- "processing in Perl code."
- msgstr ""
- #: gnu/packages/perl.scm:10285
- msgid "Template Toolkit reimplemented in as little code as possible"
- msgstr ""
- #: gnu/packages/perl.scm:10287
- msgid ""
- "@code{Template::Tiny} is a reimplementation of a subset of the\n"
- "functionality from Template Toolkit in as few lines of code as possible.\n"
- "\n"
- "It is intended for use in light-usage, low-memory, or low-cpu templating\n"
- "situations, where you may need to upgrade to the full feature set in the\n"
- "future, or if you want the retain the familiarity of TT-style templates."
- msgstr ""
- #: gnu/packages/perl.scm:10310
- msgid "Interface to the ANSI terminal escape sequences for color"
- msgstr ""
- #: gnu/packages/perl.scm:10311
- msgid ""
- "Term::ANSIColor provides constants and simple functions for\n"
- "setting ANSI text attributes, most notably colors. It can be used to set the\n"
- "current text attributes or to apply a set of attributes to a string and reset\n"
- "the current text attributes at the end of that string. Eight-color,\n"
- "sixteen-color, 256-color, and true color (24-bit color) escape sequences are all\n"
- "supported."
- msgstr ""
- #: gnu/packages/perl.scm:10335
- msgid "Detect encoding of the current terminal"
- msgstr ""
- #: gnu/packages/perl.scm:10336
- msgid ""
- "Term::Encoding is a simple module to detect the encoding of\n"
- "the current terminal expects in various ways."
- msgstr ""
- #: gnu/packages/perl.scm:10358
- msgid "Progress meter on a standard terminal"
- msgstr ""
- #: gnu/packages/perl.scm:10359
- msgid ""
- "Term::ProgressBar provides a simple progress bar on the\n"
- "terminal, to let the user know that something is happening, roughly how much\n"
- "stuff has been done, and maybe an estimate at how long remains."
- msgstr ""
- #: gnu/packages/perl.scm:10380
- msgid "Progress meter if run interactively"
- msgstr ""
- #: gnu/packages/perl.scm:10381
- msgid ""
- "Term::ProgressBar is a wonderful module for showing progress\n"
- "bars on the terminal. This module acts very much like that module when it is\n"
- "run interactively. However, when it is not run interactively (for example, as\n"
- "a cron job) then it does not show the progress bar."
- msgstr ""
- #: gnu/packages/perl.scm:10403
- msgid "Simple progress bars"
- msgstr ""
- #: gnu/packages/perl.scm:10404
- msgid ""
- "Term::ProgressBar::Simple tells you how much work has been\n"
- "done, how much is left to do, and estimate how long it will take."
- msgstr ""
- #: gnu/packages/perl.scm:10422
- msgid "Simple terminal control"
- msgstr ""
- #: gnu/packages/perl.scm:10423
- msgid ""
- "This module, ReadKey, provides ioctl control for terminals\n"
- "so the input modes can be changed (thus allowing reads of a single character\n"
- "at a time), and also provides non-blocking reads of stdin, as well as several\n"
- "other terminal related features, including retrieval/modification of the\n"
- "screen size, and retrieval/modification of the control characters."
- msgstr ""
- #: gnu/packages/perl.scm:10460
- msgid "GNU Readline/History Library interface for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:10461
- msgid ""
- "This module implements an interface to the GNU Readline\n"
- "library. It gives you input line editing facilities, input history management\n"
- "facilities, completion facilities, etc. Term::ReadLine::Gnu is upwards\n"
- "compatible with Term::ReadLine."
- msgstr ""
- #: gnu/packages/perl.scm:10485
- msgid "Retrieve terminal size"
- msgstr ""
- #: gnu/packages/perl.scm:10486
- msgid ""
- "This is a unified interface to retrieve terminal size. It\n"
- "loads one module of a list of known alternatives, each implementing some way\n"
- "to get the desired terminal information. This loaded module will actually do\n"
- "the job on behalf of @code{Term::Size::Any}."
- msgstr ""
- #: gnu/packages/perl.scm:10512
- msgid "Perl extension for retrieving terminal size (Perl version)"
- msgstr ""
- #: gnu/packages/perl.scm:10513
- msgid ""
- "This is yet another implementation of @code{Term::Size}.\n"
- "Now in pure Perl, with the exception of a C probe run at build time."
- msgstr ""
- #: gnu/packages/perl.scm:10533
- msgid "Format a header and rows into a table"
- msgstr ""
- #: gnu/packages/perl.scm:10534
- msgid ""
- "This module is able to generically format rows of data\n"
- "into tables."
- msgstr ""
- #: gnu/packages/perl.scm:10552
- msgid "Align text"
- msgstr ""
- #: gnu/packages/perl.scm:10553
- msgid ""
- "Text::Aligner exports a single function, align(), which is\n"
- "used to justify strings to various alignment styles."
- msgstr ""
- #: gnu/packages/perl.scm:10571
- msgid "Extract delimited text sequences from strings"
- msgstr ""
- #: gnu/packages/perl.scm:10572
- msgid ""
- "The Text::Balanced module can be used to extract delimited\n"
- "text sequences from strings."
- msgstr ""
- #: gnu/packages/perl.scm:10590
- msgid "Get number of occupied columns of a string on terminal"
- msgstr ""
- #: gnu/packages/perl.scm:10592
- msgid ""
- "With this module, you can calculate terminal character\n"
- "widths that vary by locale. This module supplies features similar to\n"
- "wcwidth(3) and wcswidth(3) in C language."
- msgstr ""
- #: gnu/packages/perl.scm:10610
- msgid "Manipulate comma-separated values"
- msgstr ""
- #: gnu/packages/perl.scm:10611
- msgid ""
- "Text::CSV provides facilities for the composition and\n"
- "decomposition of comma-separated values. An instance of the Text::CSV class\n"
- "can combine fields into a CSV string and parse a CSV string into fields."
- msgstr ""
- #: gnu/packages/perl.scm:10629
- msgid "Routines for manipulating CSV files"
- msgstr ""
- #: gnu/packages/perl.scm:10630
- msgid ""
- "@code{Text::CSV_XS} provides facilities for the composition\n"
- "and decomposition of comma-separated values. An instance of the\n"
- "@code{Text::CSV_XS} class will combine fields into a CSV string and parse a\n"
- "CSV string into fields. The module accepts either strings or files as input\n"
- "and support the use of user-specified characters for delimiters, separators,\n"
- "and escapes."
- msgstr ""
- #: gnu/packages/perl.scm:10654
- msgid "Perform diffs on files and record sets"
- msgstr ""
- #: gnu/packages/perl.scm:10655
- msgid ""
- "Text::Diff provides a basic set of services akin to the GNU\n"
- "diff utility. It is not anywhere near as feature complete as GNU diff, but it\n"
- "is better integrated with Perl and available on all platforms. It is often\n"
- "faster than shelling out to a system's diff executable for small files, and\n"
- "generally slower on larger files."
- msgstr ""
- #: gnu/packages/perl.scm:10678
- msgid "Various subroutines to format text"
- msgstr ""
- #: gnu/packages/perl.scm:10679
- msgid ""
- "This package provides functions to format text in various\n"
- "ways like centering, paragraphing, and converting tabs to spaces and spaces\n"
- "to tabs."
- msgstr ""
- #: gnu/packages/perl.scm:10699
- msgid "Match globbing patterns against text"
- msgstr ""
- #: gnu/packages/perl.scm:10700
- msgid ""
- "Text::Glob implements glob(3) style matching that can be\n"
- "used to match against text, rather than fetching names from a file system. If\n"
- "you want to do full file globbing use the File::Glob module instead."
- msgstr ""
- #: gnu/packages/perl.scm:10722
- msgid "Haml Perl implementation"
- msgstr ""
- #: gnu/packages/perl.scm:10724
- msgid ""
- "Text::Haml implements Haml\n"
- "@url{http://haml.info/docs/yardoc/file.REFERENCE.html} specification."
- msgstr ""
- #: gnu/packages/perl.scm:10746
- msgid "Fast, middleweight template engine"
- msgstr ""
- #: gnu/packages/perl.scm:10748
- msgid ""
- "Text::NeatTemplate provides a simple, middleweight but fast\n"
- "template engine, for when you need speed rather than complex features,\n"
- "yet need more features than simple variable substitution."
- msgstr ""
- #: gnu/packages/perl.scm:10766
- msgid "Parse text into an array of tokens or array of arrays"
- msgstr ""
- #: gnu/packages/perl.scm:10767
- msgid ""
- "Text::ParseWords module is used to parse text into an array of\n"
- "tokens or array of arrays."
- msgstr ""
- #: gnu/packages/perl.scm:10786
- msgid "Patches text with given patch"
- msgstr ""
- #: gnu/packages/perl.scm:10787
- msgid ""
- "Text::Patch combines source text with given\n"
- "diff (difference) data. Diff data is produced by Text::Diff module or\n"
- "by the standard @code{diff} utility."
- msgstr ""
- #: gnu/packages/perl.scm:10806
- msgid "Convert between Roman and Arabic algorisms"
- msgstr ""
- #: gnu/packages/perl.scm:10807
- msgid ""
- "This package provides functions to convert between Roman and\n"
- "Arabic algorisms. It supports both conventional Roman algorisms (which range\n"
- "from 1 to 3999) and Milhar Romans, a variation which uses a bar across the\n"
- "algorism to indicate multiplication by 1000."
- msgstr ""
- #: gnu/packages/perl.scm:10826
- msgid "Simple ASCII tables"
- msgstr ""
- #: gnu/packages/perl.scm:10827
- msgid "Text::SimpleTable draws simple ASCII tables."
- msgstr ""
- #: gnu/packages/perl.scm:10848
- msgid "Organize Data in Tables"
- msgstr ""
- #: gnu/packages/perl.scm:10849
- msgid "Text::Table renders plaintext tables."
- msgstr ""
- #: gnu/packages/perl.scm:10865
- msgid "Text::Tabs and Text::Wrap Modules"
- msgstr ""
- #: gnu/packages/perl.scm:10866
- msgid ""
- "Text::Tabs will add or remove tabs from a document.\n"
- "Text::Wrap will reformat lines into paragraphs."
- msgstr ""
- #: gnu/packages/perl.scm:10890
- msgid "Expand template text with embedded Perl"
- msgstr ""
- #: gnu/packages/perl.scm:10892
- msgid ""
- "This is a library for generating letters, building HTML pages, or\n"
- "filling in templates generally. A template is a piece of text that has little\n"
- "Perl programs embedded in it here and there. When you fill in a template, you\n"
- "evaluate the little programs and replace them with their values."
- msgstr ""
- #: gnu/packages/perl.scm:10911
- msgid "Provide plain ASCII transliterations of Unicode text"
- msgstr ""
- #: gnu/packages/perl.scm:10912
- msgid ""
- "Text::Unidecode provides a function, unidecode(...) that\n"
- "takes Unicode data and tries to represent it in US-ASCII characters (i.e., the\n"
- "universally displayable characters between 0x00 and 0x7F). The representation\n"
- "is almost always an attempt at transliteration-- i.e., conveying, in Roman\n"
- "letters, the pronunciation expressed by the text in some other writing\n"
- "system."
- msgstr ""
- #: gnu/packages/perl.scm:10933
- msgid "Perl interpreter-based threads"
- msgstr ""
- #: gnu/packages/perl.scm:10934
- msgid "This module exposes interpreter threads to the Perl level."
- msgstr ""
- #: gnu/packages/perl.scm:10955
- msgid "Role for classes that can be thrown"
- msgstr ""
- #: gnu/packages/perl.scm:10956
- msgid ""
- "Throwable is a role for classes that are meant to be thrown\n"
- "as exceptions to standard program flow."
- msgstr ""
- #: gnu/packages/perl.scm:10973
- msgid "Perl script tidier"
- msgstr ""
- #: gnu/packages/perl.scm:10974
- msgid ""
- "This package contains a Perl script which indents and\n"
- "reformats Perl scripts to make them easier to read. The formatting can be\n"
- "controlled with command line parameters. The default parameter settings\n"
- "approximately follow the suggestions in the Perl Style Guide."
- msgstr ""
- #: gnu/packages/perl.scm:10994
- msgid "Cycle through a list of values"
- msgstr ""
- #: gnu/packages/perl.scm:10995
- msgid ""
- "You use @code{Tie::Cycle} to go through a list over and over\n"
- "again. Once you get to the end of the list, you go back to the beginning."
- msgstr ""
- #: gnu/packages/perl.scm:11014
- msgid "Ordered associative arrays for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:11015
- msgid ""
- "This Perl module implements Perl hashes that preserve the\n"
- "order in which the hash elements were added. The order is not affected when\n"
- "values corresponding to existing keys in the IxHash are changed. The elements\n"
- "can also be set to any arbitrary supplied order. The familiar perl array\n"
- "operations can also be performed on the IxHash."
- msgstr ""
- #: gnu/packages/perl.scm:11038
- msgid "Special file handle that hides the beginning of a file"
- msgstr ""
- #: gnu/packages/perl.scm:11040
- msgid ""
- "This module provides a file handle that hides the beginning of a file,\n"
- "by modifying the @code{seek()} and @code{tell()} calls."
- msgstr ""
- #: gnu/packages/perl.scm:11057
- msgid "Variable ties made much easier"
- msgstr ""
- #: gnu/packages/perl.scm:11059
- msgid ""
- "This module adds the ability to quickly create new types of tie objects\n"
- "without creating a complete class. It does so in such a way as to try and\n"
- "make the programmers life easier when it comes to single-use ties that I find\n"
- "myself wanting to use from time-to-time.\n"
- "\n"
- "The Tie::Simple package is actually a front-end to other classes which really\n"
- "do all the work once tied, but this package does the dwimming to automatically\n"
- "figure out what you're trying to do."
- msgstr ""
- #: gnu/packages/perl.scm:11085
- msgid "Tie to an existing Perl object"
- msgstr ""
- #: gnu/packages/perl.scm:11086
- msgid ""
- "This class provides a tie constructor that returns the\n"
- "object it was given as it's first argument. This way side effects of calling\n"
- "$object->TIEHASH are avoided."
- msgstr ""
- #: gnu/packages/perl.scm:11106
- msgid "English expression of durations"
- msgstr ""
- #: gnu/packages/perl.scm:11107
- msgid ""
- "This module provides functions for expressing durations in\n"
- "rounded or exact terms."
- msgstr ""
- #: gnu/packages/perl.scm:11128
- msgid "Parse time duration strings"
- msgstr ""
- #: gnu/packages/perl.scm:11129
- msgid ""
- "Time::Duration::Parse is a module to parse human readable\n"
- "duration strings like \"2 minutes\" and \"3 seconds\" to seconds."
- msgstr ""
- #: gnu/packages/perl.scm:11147
- msgid "High-resolution alarm, sleep, gettimeofday, and interval timers"
- msgstr ""
- #: gnu/packages/perl.scm:11148
- msgid ""
- "This package implements @code{usleep}, @code{ualarm}, and\n"
- "@code{gettimeofday} for Perl, as well as wrappers to implement @code{time},\n"
- "@code{sleep}, and @code{alarm} that know about non-integral seconds."
- msgstr ""
- #: gnu/packages/perl.scm:11167
- msgid "Efficiently compute time from local and GMT time"
- msgstr ""
- #: gnu/packages/perl.scm:11168
- msgid ""
- "This module provides functions that are the inverse of\n"
- "built-in perl functions localtime() and gmtime(). They accept a date as a\n"
- "six-element array, and return the corresponding time(2) value in seconds since\n"
- "the system epoch."
- msgstr ""
- #: gnu/packages/perl.scm:11188
- msgid "Object-Oriented time objects"
- msgstr ""
- #: gnu/packages/perl.scm:11190
- msgid ""
- "This module replaces the standard @code{localtime} and @code{gmtime}\n"
- "functions with implementations that return objects. It does so in a\n"
- "backwards-compatible manner, so that using these functions as documented will\n"
- "still work as expected."
- msgstr ""
- #: gnu/packages/perl.scm:11209
- msgid "Date parsing/formatting subroutines"
- msgstr ""
- #: gnu/packages/perl.scm:11210
- msgid ""
- "This module provides routines for parsing date string into\n"
- "time values and formatting dates into ASCII strings."
- msgstr ""
- #: gnu/packages/perl.scm:11232
- msgid "Shift and scale time"
- msgstr ""
- #: gnu/packages/perl.scm:11233
- msgid ""
- "This module allows you to speed up your sleep(), alarm(),\n"
- "and time() calls."
- msgstr ""
- #: gnu/packages/perl.scm:11254
- msgid "Simple tree object"
- msgstr ""
- #: gnu/packages/perl.scm:11255
- msgid ""
- "This module in a fully object-oriented implementation of a\n"
- "simple n-ary tree."
- msgstr ""
- #: gnu/packages/perl.scm:11276
- msgid "Factory object for dispensing Visitor objects"
- msgstr ""
- #: gnu/packages/perl.scm:11277
- msgid ""
- "This module is a factory for dispensing\n"
- "Tree::Simple::Visitor::* objects."
- msgstr ""
- #: gnu/packages/perl.scm:11295
- msgid "Minimal try/catch with proper preservation of $@@"
- msgstr ""
- #: gnu/packages/perl.scm:11296
- msgid ""
- "This module provides bare bones try/catch/finally statements\n"
- "that are designed to minimize common mistakes with eval blocks, and nothing\n"
- "else."
- msgstr ""
- #: gnu/packages/perl.scm:11318
- msgid "Tie a variable to a type constraint"
- msgstr ""
- #: gnu/packages/perl.scm:11319
- msgid ""
- "This module exports a single function: @code{ttie}. It ties\n"
- "a variable to a type constraint, ensuring that whatever values stored in the\n"
- "variable will conform to the type constraint. If the type constraint has\n"
- "coercions, these will be used if necessary to ensure values assigned to the\n"
- "variable conform."
- msgstr ""
- #: gnu/packages/perl.scm:11351
- msgid "Tiny, yet Moo(se)-compatible type constraint"
- msgstr ""
- #: gnu/packages/perl.scm:11352
- msgid ""
- "@code{Type::Tiny} is a small class for writing type\n"
- "constraints, inspired by Moose's type constraint API. It has only one\n"
- "non-core dependency (and even that is simply a module that was previously\n"
- "distributed as part of @code{Type::Tiny} but has since been spun off), and can\n"
- "be used with Moose, Mouse and Moo (or none of the above)."
- msgstr ""
- #: gnu/packages/perl.scm:11372
- msgid "Provides an XS boost for some of Type::Tiny's built-in type constraints"
- msgstr ""
- #: gnu/packages/perl.scm:11373
- msgid ""
- "This module is optionally used by @code{Type::Tiny} to\n"
- "provide faster, C-based implementations of some type constraints. This\n"
- "package has only core dependencies, and does not depend on @code{Type::Tiny},\n"
- "so other data validation frameworks might also consider using it."
- msgstr ""
- #: gnu/packages/perl.scm:11395
- msgid "Types and coercions for Moose and Moo"
- msgstr ""
- #: gnu/packages/perl.scm:11396
- msgid ""
- "This module provides @code{Path::Tiny} types for Moose, Moo,\n"
- "etc. It handles two important types of coercion: coercing objects with\n"
- "overloaded stringification, and coercing to absolute paths. It also can check\n"
- "to ensure that files or directories exist."
- msgstr ""
- #: gnu/packages/perl.scm:11418
- msgid "Data types for common serialisation formats"
- msgstr ""
- #: gnu/packages/perl.scm:11419
- msgid ""
- "This module provides some extra datatypes that are used by\n"
- "common serialisation formats such as JSON or CBOR."
- msgstr ""
- #: gnu/packages/perl.scm:11446
- msgid "Unicode normalization forms"
- msgstr ""
- #: gnu/packages/perl.scm:11447
- msgid "This Perl module provides Unicode normalization forms."
- msgstr ""
- #: gnu/packages/perl.scm:11475
- msgid "Unicode collation algorithm"
- msgstr ""
- #: gnu/packages/perl.scm:11476
- msgid ""
- "This package provides tools for sorting and comparing\n"
- "Unicode data."
- msgstr ""
- #: gnu/packages/perl.scm:11497
- msgid "Unicode line breaking algorithm"
- msgstr ""
- #: gnu/packages/perl.scm:11499
- msgid ""
- "@code{Unicode::LineBreak} implements the line breaking algorithm\n"
- "described in Unicode Standard Annex #14. The @code{East_Asian_Width} property\n"
- "defined by Annex #11 is used to determine breaking positions."
- msgstr ""
- #: gnu/packages/perl.scm:11524
- msgid "Encoding and decoding of UTF-8 encoding form"
- msgstr ""
- #: gnu/packages/perl.scm:11526
- msgid ""
- "This module provides functions to encode and decode UTF-8 encoding form\n"
- "as specified by Unicode and ISO/IEC 10646:2011."
- msgstr ""
- #: gnu/packages/perl.scm:11544
- msgid "UNIVERSAL::can() reimplementation"
- msgstr ""
- #: gnu/packages/perl.scm:11545
- msgid ""
- "This module attempts to work around people calling\n"
- "UNIVERSAL::can() as a function, which it is not."
- msgstr ""
- #: gnu/packages/perl.scm:11565
- msgid "UNIVERSAL::isa() reimplementation"
- msgstr ""
- #: gnu/packages/perl.scm:11566
- msgid ""
- "This module attempts to recover from people calling\n"
- "UNIVERSAL::isa as a function."
- msgstr ""
- #: gnu/packages/perl.scm:11585
- msgid "Require modules from a variable"
- msgstr ""
- #: gnu/packages/perl.scm:11586
- msgid ""
- "This module lets you require other modules where the module\n"
- "name is in a variable, something you can't do with the @code{require}\n"
- "built-in."
- msgstr ""
- #: gnu/packages/perl.scm:11605
- msgid "Associate user-defined magic to variables from Perl"
- msgstr ""
- #: gnu/packages/perl.scm:11606
- msgid ""
- "Magic is Perl's way of enhancing variables. This mechanism\n"
- "lets the user add extra data to any variable and hook syntactical\n"
- "operations (such as access, assignment or destruction) that can be applied to\n"
- "it. With this module, you can add your own magic to any variable without\n"
- "having to write a single line of XS."
- msgstr ""
- #: gnu/packages/perl.scm:11629
- msgid "Easily generate well-formed, namespace-aware XML"
- msgstr ""
- #: gnu/packages/perl.scm:11630
- msgid ""
- "@code{XML::Writer} is a simple Perl module for writing XML\n"
- "documents: it takes care of constructing markup and escaping data correctly.\n"
- "By default, it also performs a significant amount of well-formedness checking\n"
- "on the output to make certain (for example) that start and end tags match,\n"
- "that there is exactly one document element, and that there are not duplicate\n"
- "attribute names."
- msgstr ""
- #: gnu/packages/perl.scm:11656
- msgid "Dynamically load C libraries into Perl code"
- msgstr ""
- #: gnu/packages/perl.scm:11657
- msgid ""
- "XSLoader module defines a standard simplified interface to the\n"
- "dynamic linking mechanisms available on many platforms. Its primary purpose is\n"
- "to implement cheap automatic dynamic loading of Perl modules."
- msgstr ""
- #: gnu/packages/perl.scm:11677
- msgid "Opaque, extensible XS pointer backed objects using sv_magic"
- msgstr ""
- #: gnu/packages/perl.scm:11679
- msgid ""
- "This way of associating structs with Perl space objects is designed to\n"
- "supersede Perl's builtin @code{T_PTROBJ} with something that is extensible\n"
- "(structs can be associated with any data type) and opaque (the C pointer is\n"
- "neither visible nor modifiable from Perl space)."
- msgstr ""
- #: gnu/packages/perl.scm:11700
- msgid "XS functions to assist in parsing keyword syntax"
- msgstr ""
- #: gnu/packages/perl.scm:11702
- msgid ""
- "This module provides some XS functions to assist in writing\n"
- "syntax modules that provide new perl-visible syntax, primarily for authors of\n"
- "keyword plugins using the @code{PL_keyword_plugin} hook mechanism."
- msgstr ""
- #: gnu/packages/perl.scm:11722
- msgid "YAML for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:11723
- msgid ""
- "The YAML.pm module implements a YAML Loader and Dumper based\n"
- "on the YAML 1.0 specification."
- msgstr ""
- #: gnu/packages/perl.scm:11741
- msgid "Perl YAML Serialization using XS and libyaml"
- msgstr ""
- #: gnu/packages/perl.scm:11743
- msgid ""
- "@code{YAML::XS} is a Perl XS binding to libyaml which offers Perl the\n"
- "best YAML support to date."
- msgstr ""
- #: gnu/packages/perl.scm:11765
- msgid "Read/Write YAML files"
- msgstr ""
- #: gnu/packages/perl.scm:11766
- msgid ""
- "YAML::Tiny is a perl class for reading and writing\n"
- "YAML-style files, written with as little code as possible, reducing load time\n"
- "and memory overhead."
- msgstr ""
- #: gnu/packages/perl.scm:11790
- msgid "Generate recursive-descent parsers"
- msgstr ""
- #: gnu/packages/perl.scm:11792
- msgid ""
- "@code{Parse::RecDescent} can incrementally generate top-down\n"
- "recursive-descent text parsers from simple yacc-like grammar specifications."
- msgstr ""
- #: gnu/packages/perl.scm:11812
- msgid "Generate and use LALR parsers"
- msgstr ""
- #: gnu/packages/perl.scm:11813
- msgid ""
- "This package compiles yacc-like @dfn{Look Ahead LR} (LALR)\n"
- "grammars to generate Perl object oriented parser modules."
- msgstr ""
- #: gnu/packages/perl.scm:11838
- msgid "Distribution metadata for a CPAN dist"
- msgstr ""
- #: gnu/packages/perl.scm:11839
- msgid ""
- "Software distributions released to the CPAN include a\n"
- "META.json or, for older distributions, META.yml, which describes the\n"
- "distribution, its contents, and the requirements for building and installing\n"
- "the distribution. The data structure stored in the META.json file is\n"
- "described in CPAN::Meta::Spec. CPAN::Meta provides a simple class to\n"
- "represent this distribution metadata (or distmeta), along with some helpful\n"
- "methods for interrogating that data."
- msgstr ""
- #: gnu/packages/perl.scm:11862
- msgid "Set of version requirements for a CPAN dist"
- msgstr ""
- #: gnu/packages/perl.scm:11863
- msgid ""
- "A CPAN::Meta::Requirements object models a set of version\n"
- "constraints like those specified in the META.yml or META.json files in CPAN\n"
- "distributions, and as defined by CPAN::Meta::Spec. It can be built up by\n"
- "adding more and more constraints, and will reduce them to the simplest\n"
- "representation."
- msgstr ""
- #: gnu/packages/perl.scm:11886
- msgid "Read and write a subset of YAML for CPAN Meta files"
- msgstr ""
- #: gnu/packages/perl.scm:11887
- msgid ""
- "This module implements a subset of the YAML specification\n"
- "for use in reading and writing CPAN metadata files like META.yml and\n"
- "MYMETA.yml."
- msgstr ""
- #: gnu/packages/perl.scm:11908
- msgid "Build and install Perl modules"
- msgstr ""
- #: gnu/packages/perl.scm:11909
- msgid ""
- "@code{Module::Build} is a system for building, testing, and\n"
- "installing Perl modules; it used to be part of Perl itself until version 5.22,\n"
- "which dropped it. It is meant to be an alternative to\n"
- "@code{ExtUtils::MakeMaker}. Developers may alter the behavior of the module\n"
- "through subclassing in a much more straightforward way than with\n"
- "@code{MakeMaker}. It also does not require a @command{make} on your\n"
- "system---most of the @code{Module::Build} code is pure-Perl."
- msgstr ""
- #: gnu/packages/perl.scm:11935
- msgid "Parse META.yml and META.json CPAN metadata files"
- msgstr ""
- #: gnu/packages/perl.scm:11936
- msgid ""
- "Parse::CPAN::Meta is a parser for META.json and META.yml\n"
- "files, using JSON::PP and/or CPAN::Meta::YAML."
- msgstr ""
- #: gnu/packages/perl.scm:11953
- msgid "Common Scalar and List utility subroutines"
- msgstr ""
- #: gnu/packages/perl.scm:11954
- msgid ""
- "This package contains a selection of subroutines that people\n"
- "have expressed would be nice to have in the perl core, but the usage would not\n"
- "really be high enough to warrant the use of a keyword, and the size so small\n"
- "such that being individual extensions would be wasteful."
- msgstr ""
- #: gnu/packages/perl.scm:11995
- msgid "SDL bindings to Perl"
- msgstr ""
- #: gnu/packages/perl.scm:11997
- msgid ""
- "SDL Perl is a package of Perl modules that provide both functional and\n"
- "object oriented interfaces to the Simple DirectMedia Layer for Perl5. This\n"
- "package takes some liberties with the SDL API, and attempts to adhere to the\n"
- "spirit of both the SDL and Perl."
- msgstr ""
- #: gnu/packages/perl.scm:12029
- msgid "Perl module for processing SGML parser output"
- msgstr ""
- #: gnu/packages/perl.scm:12030
- msgid ""
- "This package contains @code{SGMLS.pm}, a perl5 class library\n"
- "for parsing the output from an SGML parser such as OpenSP. It also includes\n"
- "the @command{sgmlspl} command, an Perl script showcasing how the library can\n"
- "be used."
- msgstr ""
- #: gnu/packages/perl.scm:12054
- msgid "Cross-platform functions emulating common shell commands"
- msgstr ""
- #: gnu/packages/perl.scm:12056
- msgid "Shell::Command is a thin wrapper around ExtUtils::Command."
- msgstr ""
- #: gnu/packages/perl.scm:12082
- msgid "Object-oriented File::Find replacement in Perl"
- msgstr ""
- #: gnu/packages/perl.scm:12083
- msgid ""
- "File::Find::Object is an object-oriented\n"
- "File::Find replacement in Perl."
- msgstr ""
- #: gnu/packages/perl.scm:12109
- msgid "Alternative interface to File::Find::Object"
- msgstr ""
- #: gnu/packages/perl.scm:12110
- msgid ""
- "File::Find::Object::Rule is an alternative Perl\n"
- "interface to File::Find::Object."
- msgstr ""
- #: gnu/packages/perl.scm:12131
- msgid "Wrapper for @code{File::Find} ala @code{find(1)}"
- msgstr ""
- #: gnu/packages/perl.scm:12133
- msgid ""
- "@code{File::Find} is great, but constructing the wanted routine can\n"
- "sometimes be a pain. @code{File::Finder} provides a wanted-writer, using\n"
- "syntax that is directly mappable to the @code{find(1)} command's syntax.\n"
- "\n"
- "A @code{File::Finder} object contains a hash of @code{File::Find} options, and\n"
- "a series of steps that mimic find's predicates. Initially, a\n"
- "@code{File::Finder} object has no steps. Each step method clones the previous\n"
- "object's options and steps, and then adds the new step, returning the new\n"
- "object. In this manner, an object can be grown, step by step, by chaining\n"
- "method calls. Furthermore, a partial sequence can be created and held, and\n"
- "used as the head of many different sequences."
- msgstr ""
- #: gnu/packages/perl.scm:12160
- msgid "File locking with fcntl(2)"
- msgstr ""
- #: gnu/packages/perl.scm:12161
- msgid ""
- "File locking in Perl is usually done using the @code{flock}\n"
- "function. Unfortunately, this only allows locks on whole files and is often\n"
- "implemented in terms of the @code{flock(2)} system function which has some\n"
- "shortcomings (especially concerning locks on remotely mounted file systems)\n"
- "and slightly different behaviour than @code{fcntl(2)}."
- msgstr ""
- #: gnu/packages/perl.scm:12184
- msgid "TTF font support for Perl"
- msgstr ""
- #: gnu/packages/perl.scm:12185
- msgid ""
- "This package provides a Perl module for TrueType/OpenType\n"
- "font hacking. It supports reading, processing and writing of the following\n"
- "tables: GDEF, GPOS, GSUB, LTSH, OS/2, PCLT, bsln, cmap, cvt, fdsc, feat,\n"
- "fpgm, glyf, hdmx, head, hhea, hmtx, kern, loca, maxp, mort, name, post, prep,\n"
- "prop, vhea, vmtx and the reading and writing of all other table types."
- msgstr ""
- #: gnu/packages/perl.scm:12221
- msgid "Collection of Perl modules for time/date manipulation"
- msgstr ""
- #: gnu/packages/perl.scm:12222
- msgid ""
- "Provides several perl modules for date/time manipulation:\n"
- "@code{Time::CTime.pm}, @code{Time::JulianDay.pm}, @code{Time::ParseDate.pm},\n"
- "@code{Time::Timezone.pm}, and @code{Time::DaysInMonth.pm}."
- msgstr ""
- #: gnu/packages/perl.scm:12251
- msgid "Perl library for testing if a time() is in a specific period"
- msgstr ""
- #: gnu/packages/perl.scm:12252
- msgid ""
- "This Perl library provides a function which tells whether a\n"
- "specific time falls within a specified time period. Its syntax for specifying\n"
- "time periods allows you to test for conditions like \"Monday to Friday, 9am\n"
- "till 5pm\" and \"on the second Tuesday of the month\" and \"between 4pm and\n"
- "4:15pm\" and \"in the first half of each minute\" and \"in January of\n"
- "1998\"."
- msgstr ""
- #: gnu/packages/perl.scm:12279
- msgid "Iterative, recursive file finder"
- msgstr ""
- #: gnu/packages/perl.scm:12280
- msgid ""
- "Path::Iterator::Rule iterates over files and directories to\n"
- "identify ones matching a user-defined set of rules. The API is based heavily\n"
- "on File::Find::Rule, but with more explicit distinction between matching rules\n"
- "and options that influence how directories are searched. A\n"
- "Path::Iterator::Rule object is a collection of rules (match criteria) with\n"
- "methods to add additional criteria. Options that control directory traversal\n"
- "are given as arguments to the method that generates an iterator.\n"
- "\n"
- "A summary of features for comparison to other file finding modules:\n"
- "\n"
- "@itemize\n"
- "@item provides many helper methods for specifying rules\n"
- "@item offers (lazy) iterator and flattened list interfaces\n"
- "@item custom rules implemented with callbacks\n"
- "@item breadth-first (default) or pre- or post-order depth-first searching\n"
- "@item follows symlinks (by default, but can be disabled)\n"
- "@item directories visited only once (no infinite loop; can be disabled)\n"
- "@item doesn't chdir during operation\n"
- "@item provides an API for extensions\n"
- "@end itemize\n"
- "\n"
- "As a convenience, the PIR module is an empty subclass of this one that is less\n"
- "arduous to type for one-liners."
- msgstr ""
- #: gnu/packages/perl.scm:12322
- msgid "Include constants from POD"
- msgstr ""
- #: gnu/packages/perl.scm:12323
- msgid ""
- "This module allows you to specify those constants that\n"
- "should be documented in your POD, and pull them out a run time in a fairly\n"
- "arbitrary fashion.\n"
- "\n"
- "Pod::Constants uses Pod::Parser to do the parsing of the source file. It has\n"
- "to open the source file it is called from, and does so directly either by\n"
- "lookup in %INC or by assuming it is $0 if the caller is @code{main}\n"
- "(or it can't find %INC{caller()})."
- msgstr ""
- #: gnu/packages/perl.scm:12348
- msgid "Implementation of the soundex algorithm"
- msgstr ""
- #: gnu/packages/perl.scm:12349
- msgid ""
- "Soundex is a phonetic algorithm for indexing names by sound,\n"
- "as pronounced in English. The goal is for names with the same pronunciation to\n"
- "be encoded to the same representation so that they can be matched despite\n"
- "minor differences in spelling.\n"
- "\n"
- "This module implements the original soundex algorithm developed by Robert\n"
- "Russell and Margaret Odell, patented in 1918 and 1922, as well as a variation\n"
- "called \"American Soundex\" used for US census data, and current maintained by\n"
- "the National Archives and Records Administration (NARA)."
- msgstr ""
- #: gnu/packages/perl.scm:12375
- msgid ""
- "Line wrapping for multibyte, fullwidth, combining\n"
- "characters and so on"
- msgstr ""
- #: gnu/packages/perl.scm:12378
- msgid ""
- "This module intends to be a better Text::Wrap module. This\n"
- "module is needed to support multibyte character encodings such as UTF-8,\n"
- "EUC-JP, EUC-KR, GB2312, and Big5. This module also supports characters with\n"
- "irregular widths, such as combining characters (which occupy zero columns on\n"
- "terminal, like diacritical marks in UTF-8) and fullwidth characters (which\n"
- "occupy two columns on terminal, like most of east Asian characters). Also,\n"
- "minimal handling of languages which doesn't use whitespaces between\n"
- "words (like Chinese and Japanese) is supported."
- msgstr ""
- #: gnu/packages/perl.scm:12404
- msgid "Collection of regexp patterns"
- msgstr ""
- #: gnu/packages/perl.scm:12405
- msgid ""
- "Regexp::Pattern is a convention for organizing reusable\n"
- "regexp patterns in modules."
- msgstr ""
- #: gnu/packages/perl.scm:12428
- msgid "Parse Lisp S-Expressions into Perl data structures"
- msgstr ""
- #: gnu/packages/perl.scm:12429
- msgid ""
- "Data::SExpression parses Lisp S-Expressions into Perl data\n"
- "structures."
- msgstr ""
- #: gnu/packages/perl.scm:12449
- msgid "Perl implementation of the GNTP Protocol (client part)"
- msgstr ""
- #: gnu/packages/perl.scm:12450
- msgid ""
- "Growl::GNTP is a Perl implementation of the client part\n"
- "of the Growl Notification Transport Protocol (GNTP)."
- msgstr ""
- #: gnu/packages/perl.scm:12469
- msgid "Perform advanced operations via sendmsg and recvmsg"
- msgstr ""
- #: gnu/packages/perl.scm:12470
- msgid ""
- "Socket::MsgHdr provides advanced socket messaging operations\n"
- "via sendmsg and recvmsg.\n"
- "\n"
- "It also allows manipulating ancillary data or so-called control\n"
- "information (cmsghdr). This ancillary data may be used for file descriptor\n"
- "passing, IPv6 operations, and a host of implemenation-specific extensions."
- msgstr ""
- #: gnu/packages/photo.scm:176
- msgid "Import photos and videos from cameras, phones and memory cards"
- msgstr ""
- #: gnu/packages/photo.scm:177
- msgid ""
- "Import photos and videos from cameras, phones and memory\n"
- "cards and generate meaningful file and folder names."
- msgstr ""
- #: gnu/packages/photo.scm:200
- msgid "Raw image decoder"
- msgstr ""
- #: gnu/packages/photo.scm:202
- msgid ""
- "LibRaw is a library for reading RAW files obtained from digital photo\n"
- "cameras (CRW/CR2, NEF, RAF, DNG, and others)."
- msgstr ""
- #: gnu/packages/photo.scm:227
- msgid "Read and manipulate EXIF data in digital photographs"
- msgstr ""
- #: gnu/packages/photo.scm:229
- msgid ""
- "The libexif C library allows applications to read, edit, and save EXIF\n"
- "data as produced by digital cameras."
- msgstr ""
- #: gnu/packages/photo.scm:252
- msgid "Accessing digital cameras"
- msgstr ""
- #: gnu/packages/photo.scm:254
- msgid ""
- "This is the library backend for gphoto2. It contains the code for PTP,\n"
- "MTP, and other vendor specific protocols for controlling and transferring data\n"
- "from digital cameras."
- msgstr ""
- #: gnu/packages/photo.scm:289
- msgid "Command-line tools to access digital cameras"
- msgstr ""
- #: gnu/packages/photo.scm:291
- msgid ""
- "Gphoto2 is a set of command line utilities for manipulating a large\n"
- "number of different digital cameras. Through libgphoto2, it supports PTP,\n"
- "MTP, and much more."
- msgstr ""
- #: gnu/packages/photo.scm:330
- msgid "Program and Perl library to manipulate EXIF and other metadata"
- msgstr ""
- #: gnu/packages/photo.scm:331
- msgid ""
- "This package provides the @code{exiftool} command and the\n"
- "@code{Image::ExifTool} Perl library to manipulate EXIF tags of digital images\n"
- "and a wide variety of other metadata."
- msgstr ""
- #: gnu/packages/photo.scm:355
- msgid "Library for panoramic images"
- msgstr ""
- #: gnu/packages/photo.scm:357
- msgid ""
- "The libpano13 package contains the backend library written by the\n"
- "Panorama Tools project for building panoramic images from a set of\n"
- "overlapping images, as well as some command line tools."
- msgstr ""
- #: gnu/packages/photo.scm:410
- msgid "Tools for combining and blending images"
- msgstr ""
- #: gnu/packages/photo.scm:412
- msgid ""
- "Enblend blends away the seams in a panoramic image mosaic using a\n"
- "multi-resolution spline. Enfuse merges different exposures of the same\n"
- "scene to produce an image that looks much like a tone-mapped image."
- msgstr ""
- #: gnu/packages/photo.scm:444
- msgid "Library to correct optical lens defects with a lens database"
- msgstr ""
- #: gnu/packages/photo.scm:445
- msgid ""
- "Digital photographs are not ideal. Of course, the better is\n"
- "your camera, the better the results will be, but in any case if you look\n"
- "carefully at shots taken even by the most expensive cameras equipped with the\n"
- "most expensive lenses you will see various artifacts. It is very hard to make\n"
- "ideal cameras, because there are a lot of factors that affect the final image\n"
- "quality, and at some point camera and lens designers have to trade one factor\n"
- "for another to achieve the optimal image quality, within the given design\n"
- "restrictions and budget. But we all want ideal shots, don't we? So that's\n"
- "what's Lensfun is all about: rectifying the defects introduced by your\n"
- "photographic equipment."
- msgstr ""
- #: gnu/packages/photo.scm:571
- msgid "Virtual lighttable and darkroom for photographers"
- msgstr ""
- #: gnu/packages/photo.scm:572
- msgid ""
- "Darktable is a photography workflow application and RAW\n"
- "developer. It manages your digital negatives in a database, lets you view\n"
- "them through a zoomable lighttable and enables you to develop raw images\n"
- "and enhance them."
- msgstr ""
- #: gnu/packages/photo.scm:615
- msgid "Quick, simple but powerful image editor"
- msgstr ""
- #: gnu/packages/photo.scm:616
- msgid ""
- "Photoflare is a cross-platform image editor with an aim\n"
- "to balance between powerful features and a very friendly graphical user\n"
- "interface. It suits a wide variety of different tasks and users who value a\n"
- "more nimble workflow. Features include basic image editing capabilities,\n"
- "paint brushes, image filters, colour adjustments and more advanced features\n"
- "such as Batch image processing."
- msgstr ""
- #: gnu/packages/photo.scm:681
- msgid "Camera control and capture"
- msgstr ""
- #: gnu/packages/photo.scm:683
- msgid ""
- "Entangle is an application which uses GTK and libgphoto2 to provide a\n"
- "graphical interface for tethered photography with digital cameras. It\n"
- "includes control over camera shooting and configuration settings and 'hands\n"
- "off' shooting directly from the controlling computer."
- msgstr ""
- #: gnu/packages/photo.scm:750
- msgid "Panorama photo stitcher"
- msgstr ""
- #: gnu/packages/photo.scm:752
- msgid ""
- "Hugin is an easy to use panoramic imaging toolchain with a graphical\n"
- "user interface. It can be used to assemble a mosaic of photographs into\n"
- "a complete panorama and stitch any series of overlapping pictures."
- msgstr ""
- #: gnu/packages/photo.scm:806
- msgid "Raw image developing and processing"
- msgstr ""
- #: gnu/packages/photo.scm:807
- msgid ""
- "RawTherapee is a raw image processing suite. It comprises a\n"
- "subset of image editing operations specifically aimed at non-destructive raw\n"
- "photo post-production and is primarily focused on improving a photographer's\n"
- "workflow by facilitating the handling of large numbers of images. Most raw\n"
- "formats are supported, including Pentax Pixel Shift, Canon Dual-Pixel, and those\n"
- "from Foveon and X-Trans sensors."
- msgstr ""
- #: gnu/packages/photo.scm:833
- msgid "Highly optimized library for processing RAW images"
- msgstr ""
- #: gnu/packages/photo.scm:835
- msgid "This package provides RawTherapee's highly optimized RAW processing routines."
- msgstr "이와 같은 꾸러미는 RawTherapee의 고도로 최적화된 단순 처리 일상을 제공합니다."
- #: gnu/packages/ratpoison.scm:93
- msgid "Simple mouse-free tiling window manager"
- msgstr ""
- #: gnu/packages/ratpoison.scm:95
- msgid ""
- "Ratpoison is a simple window manager with no fat library\n"
- "dependencies, no fancy graphics, no window decorations, and no\n"
- "rodent dependence. It is largely modelled after GNU Screen which\n"
- "has done wonders in the virtual terminal market.\n"
- "\n"
- "The screen can be split into non-overlapping frames. All windows\n"
- "are kept maximized inside their frames to take full advantage of\n"
- "your precious screen real estate.\n"
- "\n"
- "All interaction with the window manager is done through keystrokes.\n"
- "Ratpoison has a prefix map to minimize the key clobbering that\n"
- "cripples Emacs and other quality pieces of software."
- msgstr ""
- #: gnu/packages/readline.scm:103
- msgid "Edit command lines while typing, with history support"
- msgstr ""
- #: gnu/packages/readline.scm:105
- msgid ""
- "The GNU readline library allows users to edit command lines as they\n"
- "are typed in. It can maintain a searchable history of previously entered\n"
- "commands, letting you easily recall, edit and re-enter past commands. It\n"
- "features both Emacs-like and vi-like keybindings, making its usage\n"
- "comfortable for anyone."
- msgstr ""
- #: gnu/packages/readline.scm:161
- msgid "Wrapper to allow the editing of keyboard commands"
- msgstr ""
- #: gnu/packages/readline.scm:163
- msgid ""
- "Rlwrap is a 'readline wrapper', a small utility that uses the GNU\n"
- "readline library to allow the editing of keyboard input for any command. You\n"
- "should consider rlwrap especially when you need user-defined completion (by way\n"
- "of completion word lists) and persistent history, or if you want to program\n"
- "`special effects' using the filter mechanism."
- msgstr ""
- #: gnu/packages/scanner.scm:84
- msgid "SANE backend for eSCL (AirScan) and WSD document scanners"
- msgstr ""
- #: gnu/packages/scanner.scm:86
- msgid ""
- "This SANE backend lets you scan documents and images from scanners and\n"
- "multi-function printers that speak eSCL (marketed as ``AirScan'') or\n"
- "@acronym{WSD, Web Services for Devices} (or ``WS-Scan'').\n"
- "\n"
- "Both are vendor-neutral protocols that allow ``driverless'' scanning over IPv4\n"
- "and IPv6 networks without the vendor-specific drivers that make up most of the\n"
- "sane-backends collection. This is similar to how most contemporary printers\n"
- "speak the universal @acronym{IPP, Internet Printing Protocol}.\n"
- "\n"
- "Only scanners that support eSCL will also work over USB. This requires a\n"
- "suitable IPP-over-USB daemon like ipp-usb to be installed and configured.\n"
- "\n"
- "Any eSCL or WSD-capable scanner should just work. sane-airscan automatically\n"
- "discovers and configures devices, including which protocol to use. It was\n"
- "successfully tested with many devices from Brother, Canon, Dell, Kyocera,\n"
- "Lexmark, Epson, HP, OKI, Panasonic, Pantum, Ricoh, Samsung, and Xerox, with both\n"
- "WSD and eSCL."
- msgstr ""
- #: gnu/packages/scanner.scm:202
- msgid "Raster image scanner library and drivers, without scanner support"
- msgstr ""
- #: gnu/packages/scanner.scm:203
- msgid ""
- "SANE stands for \"Scanner Access Now Easy\" and is an API\n"
- "proving access to any raster image scanner hardware (flatbed scanner,\n"
- "hand-held scanner, video- and still-cameras, frame-grabbers, etc.). The\n"
- "package contains the library, but no drivers."
- msgstr ""
- #: gnu/packages/scanner.scm:250
- msgid "Raster image scanner library and drivers, with scanner support"
- msgstr ""
- #: gnu/packages/scanner.scm:251
- msgid ""
- "SANE stands for \"Scanner Access Now Easy\" and is an API\n"
- "proving access to any raster image scanner hardware (flatbed scanner,\n"
- "hand-held scanner, video- and still-cameras, frame-grabbers, etc.). The\n"
- "package contains the library and drivers."
- msgstr ""
- #: gnu/packages/scanner.scm:306
- msgid "Image scanning software for EPSON devices"
- msgstr ""
- #: gnu/packages/scanner.scm:308
- msgid ""
- "Utsushi is a set of applications for image scanning with\n"
- "support for a number of EPSON scanners, including a compatibility driver to\n"
- "interface with software built around the @acronym{SANE, Scanner Access Now Easy}\n"
- "standard."
- msgstr ""
- #: gnu/packages/scanner.scm:359
- msgid "Configurable scanner button monitor"
- msgstr ""
- #: gnu/packages/scanner.scm:360
- msgid ""
- "Scanbd stands for scanner button daemon. It regularly polls\n"
- "scanners for pressed buttons, function knob changes, or other events such\n"
- "as (un)plugging the scanner or inserting and removing paper. Then it performs\n"
- "the desired action(s) such as saving, copying, or e-mailing the image.\n"
- "\n"
- "Actions can be fully customized through scripts, based on any combination of\n"
- "switch or knob settings. Events are also signaled over D-Bus and scans can\n"
- "even be triggered over D-Bus from foreign applications.\n"
- "\n"
- "Scanbd talks to scanners through the @acronym{SANE, Scanner Access Now Easy}\n"
- "back-end library. This means that it supports almost all existing scanners,\n"
- "provided the driver also exposes the buttons."
- msgstr ""
- #: gnu/packages/scanner.scm:446
- msgid "Featureful graphical interface for document and image scanners"
- msgstr ""
- #: gnu/packages/scanner.scm:448
- msgid ""
- "XSane is a graphical interface for controlling a scanner and acquiring\n"
- "images from it. You can photocopy multi-page documents and save, fax, print,\n"
- "or e-mail your scanned images. It is highly configurable and exposes all\n"
- "device settings, letting you fine-tune the final result. It can also be used\n"
- "as a GIMP plugin to acquire images directly from a scanner.\n"
- "\n"
- "XSane talks to scanners through the @acronym{SANE, Scanner Access Now Easy}\n"
- "back-end library, which supports almost all existing scanners."
- msgstr ""
- #: gnu/packages/scheme.scm:230
- msgid "Scheme implementation with integrated editor and debugger"
- msgstr ""
- #: gnu/packages/scheme.scm:232
- msgid ""
- "GNU/MIT Scheme is an implementation of the Scheme programming\n"
- "language. It provides an interpreter, a compiler and a debugger. It also\n"
- "features an integrated Emacs-like editor and a large runtime library."
- msgstr ""
- #: gnu/packages/scheme.scm:329
- msgid "Efficient Scheme compiler"
- msgstr ""
- #: gnu/packages/scheme.scm:331
- msgid ""
- "Bigloo is a Scheme implementation devoted to one goal: enabling Scheme\n"
- "based programming style where C(++) is usually required. Bigloo attempts to\n"
- "make Scheme practical by offering features usually presented by traditional\n"
- "programming languages but not offered by Scheme and functional programming.\n"
- "Bigloo compiles Scheme modules. It delivers small and fast stand alone binary\n"
- "executables. Bigloo enables full connections between Scheme and C programs\n"
- "and between Scheme and Java programs."
- msgstr ""
- #: gnu/packages/scheme.scm:382
- msgid "Multi-tier programming language for the Web 2.0"
- msgstr ""
- #: gnu/packages/scheme.scm:384
- msgid ""
- "HOP is a multi-tier programming language for the Web 2.0 and the\n"
- "so-called diffuse Web. It is designed for programming interactive web\n"
- "applications in many fields such as multimedia (web galleries, music players,\n"
- "...), ubiquitous and house automation (SmartPhones, personal appliance),\n"
- "mashups, office (web agendas, mail clients, ...), etc."
- msgstr ""
- #: gnu/packages/scheme.scm:405
- msgid "Scheme implementation using a bytecode interpreter"
- msgstr ""
- #: gnu/packages/scheme.scm:407
- msgid ""
- "Scheme 48 is an implementation of Scheme based on a byte-code\n"
- "interpreter and is designed to be used as a testbed for experiments in\n"
- "implementation techniques and as an expository tool."
- msgstr ""
- #: gnu/packages/scheme.scm:537
- msgid "Pre-Scheme compiler from Scheme 48"
- msgstr ""
- #: gnu/packages/scheme.scm:539
- msgid ""
- "Pre-Scheme is a statically compilable dialect of Scheme, used to implement the\n"
- "Scheme 48 virtual machine. Scheme 48 ships with a Pre-Scheme to C compiler written\n"
- "in Scheme, and a runtime library which allows Pre-Scheme code to run as Scheme."
- msgstr ""
- #: gnu/packages/scheme.scm:565
- msgid "Efficient Scheme interpreter and compiler"
- msgstr ""
- #: gnu/packages/scheme.scm:567
- msgid ""
- "Gambit consists of two main programs: gsi, the Gambit Scheme\n"
- "interpreter, and gsc, the Gambit Scheme compiler. The interpreter contains\n"
- "the complete execution and debugging environment. The compiler is the\n"
- "interpreter extended with the capability of generating executable files. The\n"
- "compiler can produce standalone executables or compiled modules which can be\n"
- "loaded at run time. Interpreted code and compiled code can be freely\n"
- "mixed."
- msgstr ""
- #: gnu/packages/scheme.scm:599
- msgid "Small embeddable Scheme implementation"
- msgstr ""
- #: gnu/packages/scheme.scm:601
- msgid ""
- "Chibi-Scheme is a very small library with no external dependencies\n"
- "intended for use as an extension and scripting language in C programs. In\n"
- "addition to support for lightweight VM-based threads, each VM itself runs in\n"
- "an isolated heap allowing multiple VMs to run simultaneously in different OS\n"
- "threads."
- msgstr ""
- #: gnu/packages/scheme.scm:648
- msgid "Structure and Interpretation of Computer Programs"
- msgstr ""
- #: gnu/packages/scheme.scm:649
- msgid ""
- "Structure and Interpretation of Computer Programs (SICP) is\n"
- "a textbook aiming to teach the principles of computer programming.\n"
- "\n"
- "Using Scheme, a dialect of the Lisp programming language, the book explains\n"
- "core computer science concepts such as abstraction in programming,\n"
- "metalinguistic abstraction, recursion, interpreters, and modular programming."
- msgstr ""
- #: gnu/packages/scheme.scm:691
- msgid "SRE String pattern-matching library for scheme48"
- msgstr ""
- #: gnu/packages/scheme.scm:693
- msgid ""
- "String pattern-matching library for scheme48 based on the SRE\n"
- "regular-expression notation."
- msgstr ""
- #: gnu/packages/scheme.scm:725
- msgid "Compatibility and utility library for Scheme"
- msgstr ""
- #: gnu/packages/scheme.scm:726
- msgid ""
- "SLIB is a portable Scheme library providing compatibility and\n"
- "utility functions for all standard Scheme implementations."
- msgstr ""
- #: gnu/packages/scheme.scm:779
- msgid "Scheme implementation conforming to R5RS and IEEE P1178"
- msgstr ""
- #: gnu/packages/scheme.scm:780
- msgid ""
- "GNU SCM is an implementation of Scheme. This\n"
- "implementation includes Hobbit, a Scheme-to-C compiler, which can\n"
- "generate C files whose binaries can be dynamically or statically\n"
- "linked with a SCM executable."
- msgstr ""
- #: gnu/packages/scheme.scm:837
- msgid "Light-weight interpreter for the Scheme programming language"
- msgstr ""
- #: gnu/packages/scheme.scm:839
- msgid ""
- "TinyScheme is a light-weight Scheme interpreter that implements as large a\n"
- "subset of R5RS as was possible without getting very large and complicated.\n"
- "\n"
- "It's meant to be used as an embedded scripting interpreter for other programs.\n"
- "As such, it does not offer an Integrated Development Environment (@dfn{IDE}) or\n"
- "extensive toolkits, although it does sport a small (and optional) top-level\n"
- "loop.\n"
- "\n"
- "As an embedded interpreter, it allows multiple interpreter states to coexist in\n"
- "the same program, without any interference between them. Foreign functions in C\n"
- "can be added and values can be defined in the Scheme environment. Being quite a\n"
- "small program, it is easy to comprehend, get to grips with, and use."
- msgstr ""
- #: gnu/packages/scheme.scm:918
- msgid "Brutally efficient Scheme compiler"
- msgstr ""
- #: gnu/packages/scheme.scm:920
- msgid ""
- "Stalin is an aggressively optimizing whole-program compiler\n"
- "for Scheme that does polyvariant interprocedural flow analysis,\n"
- "flow-directed interprocedural escape analysis, flow-directed\n"
- "lightweight CPS conversion, flow-directed lightweight closure\n"
- "conversion, flow-directed interprocedural lifetime analysis, automatic\n"
- "in-lining, unboxing, and flow-directed program-specific and\n"
- "program-point-specific low-level representation selection and code\n"
- "generation."
- msgstr ""
- #: gnu/packages/scheme.scm:954
- msgid "Interpreter for R4RS Scheme"
- msgstr ""
- #: gnu/packages/scheme.scm:956
- msgid ""
- "Scheme 9 from Empty Space (S9fES) is a mature, portable, and\n"
- "comprehensible public-domain interpreter for R4RS Scheme offering:\n"
- "@itemize\n"
- "@item bignum arithmetics\n"
- "@item decimal-based real number arithmetics\n"
- "@item support for low-level Unix programming\n"
- "@item cursor addressing with Curses\n"
- "@item basic networking procedures\n"
- "@item an integrated online help system\n"
- "@item loads of useful library functions\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/scheme.scm:1012
- msgid "Scheme-like lisp implementation"
- msgstr ""
- #: gnu/packages/scheme.scm:1014
- msgid ""
- "@code{femtolisp} is a scheme-like lisp implementation with a\n"
- "simple, elegant Scheme dialect. It is a lisp-1 with lexical scope.\n"
- "The core is 12 builtin special forms and 33 builtin functions."
- msgstr ""
- #: gnu/packages/scheme.scm:1072
- msgid "Scheme scripting engine"
- msgstr ""
- #: gnu/packages/scheme.scm:1073
- msgid ""
- "Gauche is a R7RS Scheme scripting engine aiming at being a\n"
- "handy tool that helps programmers and system administrators to write small to\n"
- "large scripts quickly. Quick startup, built-in system interface, native\n"
- "multilingual support are some of the goals. Gauche comes with a package\n"
- "manager/installer @code{gauche-package} which can download, compile, install\n"
- "and list gauche extension packages."
- msgstr ""
- #: gnu/packages/scheme.scm:1103
- msgid "R7RS Scheme implementation in Common Lisp"
- msgstr ""
- #: gnu/packages/scheme.scm:1105
- msgid ""
- "This is a R7RS Scheme implementation designed to run within\n"
- "a Common Lisp environment."
- msgstr ""
- #: gnu/packages/scheme.scm:1202
- msgid "Meta-dialect of Scheme with post-modern features"
- msgstr ""
- #: gnu/packages/scheme.scm:1203
- msgid ""
- "Gerbil is an opinionated dialect of Scheme designed for Systems\n"
- "Programming, with a state of the art macro and module system on top of the Gambit\n"
- "runtime. The macro system is based on quote-syntax, and provides the full meta-syntactic\n"
- "tower with a native implementation of syntax-case. It also provides a full-blown module\n"
- "system, similar to PLT Scheme's (sorry, Racket) modules. The main difference from Racket\n"
- "is that Gerbil modules are single instantiation, supporting high performance ahead of\n"
- "time compilation and compiled macros."
- msgstr ""
- #: gnu/packages/search.scm:105
- msgid "Search Engine Library"
- msgstr ""
- #: gnu/packages/search.scm:107
- msgid ""
- "Xapian is a highly adaptable toolkit which allows developers to easily\n"
- "add advanced indexing and search facilities to their own applications. It\n"
- "supports the Probabilistic Information Retrieval model and also supports a\n"
- "rich set of boolean query operators."
- msgstr ""
- #: gnu/packages/search.scm:130
- msgid "Search engine built on Xapian"
- msgstr ""
- #: gnu/packages/search.scm:132
- msgid ""
- "Omega is a search application built on Xapian. It provides indexers and\n"
- "a CGI web search frontend."
- msgstr ""
- #: gnu/packages/search.scm:167
- msgid "Python bindings for the Xapian search engine library"
- msgstr ""
- #: gnu/packages/search.scm:187
- msgid "Perl XS frontend to the Xapian C++ search library"
- msgstr ""
- #: gnu/packages/search.scm:189
- msgid ""
- "Search::Xapian wraps most methods of most Xapian classes. The missing\n"
- "classes and methods should be added in the future. It also provides a\n"
- "simplified, more 'perlish' interface to some common operations."
- msgstr ""
- #: gnu/packages/search.scm:230
- msgid "Tool for Obsessive Compulsive Classifiers"
- msgstr ""
- #: gnu/packages/search.scm:232
- msgid ""
- "libtocc is the engine of the Tocc project, a tag-based file management\n"
- "system. The goal of Tocc is to provide a better system for classifying files\n"
- "that is more flexible than classic file systems that are based on a tree of\n"
- "files and directories."
- msgstr ""
- #: gnu/packages/search.scm:253
- msgid "Command-line interface to libtocc"
- msgstr ""
- #: gnu/packages/search.scm:255
- msgid ""
- "Tocc is a tag-based file management system. This package contains the\n"
- "command line tool for interacting with libtocc."
- msgstr ""
- #: gnu/packages/search.scm:302
- msgid "Privacy-respecting metasearch engine"
- msgstr ""
- #: gnu/packages/search.scm:303
- msgid "Searx is a privacy-respecting, hackable metasearch engine."
- msgstr ""
- #: gnu/packages/search.scm:320
- msgid "Finding text and HTML files that match boolean expressions"
- msgstr ""
- #: gnu/packages/search.scm:322
- msgid ""
- "GNU Bool is a utility to perform text searches on files using Boolean\n"
- "expressions. For example, a search for \"hello AND world\" would return a\n"
- "file containing the phrase \"Hello, world!\". It supports both AND and OR\n"
- "statements, as well as the NEAR statement to search for the occurrence of\n"
- "words in close proximity to each other. It handles context gracefully,\n"
- "accounting for new lines and paragraph changes. It also has robust support\n"
- "for parsing HTML files."
- msgstr ""
- #: gnu/packages/search.scm:356
- msgid "Fast file search utility"
- msgstr ""
- #: gnu/packages/search.scm:358
- msgid ""
- "FSearch is a fast file search utility, inspired by Everything\n"
- "Search Engine. It is written in C and based on GTK3."
- msgstr ""
- #: gnu/packages/search.scm:451
- msgid "Find documents based on their contents or file names"
- msgstr ""
- #: gnu/packages/search.scm:452
- msgid ""
- "Recoll finds documents based on their contents as well as\n"
- "their file names. It can search most document formats, but you may need\n"
- "external applications for text extraction. It can reach any storage place:\n"
- "files, archive members, email attachments, transparently handling\n"
- "decompression."
- msgstr ""
- #: gnu/packages/search.scm:479
- msgid "Full-text search system"
- msgstr ""
- #: gnu/packages/search.scm:480
- msgid ""
- "Hyper Estraier can be used to integrate full-text\n"
- "search into applications, using either the provided command line and CGI\n"
- "interfaces, or a C API."
- msgstr ""
- #: gnu/packages/search.scm:498
- msgid "Locate files on the file system"
- msgstr ""
- #: gnu/packages/search.scm:500
- msgid ""
- "mlocate is a locate/updatedb implementation. The @code{m} stands for\n"
- "\"merging\": @code{updatedb} reuses the existing database to avoid rereading\n"
- "most of the file system, which makes it faster and does not trash the system\n"
- "caches as much. The locate(1) utility is intended to be completely compatible\n"
- "with slocate, and attempts to be compatible to GNU locate when it does not\n"
- "conflict with slocate compatibility."
- msgstr ""
- #: gnu/packages/search.scm:540
- msgid "Faster locate"
- msgstr ""
- #: gnu/packages/search.scm:541
- msgid ""
- "Plocate is a @code{locate} based on posting lists,\n"
- "completely replacing @command{mlocate} with a faster and smaller index. It is\n"
- "suitable as a default locate on your system."
- msgstr ""
- #: gnu/packages/search.scm:600
- msgid "Web indexing system"
- msgstr ""
- #: gnu/packages/search.scm:602
- msgid ""
- "Swish-e is Simple Web Indexing System for Humans - Enhanced. Swish-e\n"
- "can quickly and easily index directories of files or remote web sites and\n"
- "search the generated indexes."
- msgstr ""
- #: gnu/packages/search.scm:666
- msgid "Personal document indexing system"
- msgstr ""
- #: gnu/packages/search.scm:668
- msgid ""
- "Xapers is a personal document indexing system,\n"
- "geared towards academic journal articles build on the Xapian search engine.\n"
- "Think of it as your own personal document search engine, or a local cache of\n"
- "online libraries. It provides fast search of document text and\n"
- "bibliographic data and simple document and bibtex retrieval."
- msgstr ""
- #: gnu/packages/search.scm:717
- msgid "Faster grep with an interactive query UI"
- msgstr ""
- #: gnu/packages/search.scm:718
- msgid ""
- "Ugrep is a ultra fast searcher of file systems, text\n"
- "and binary files, source code, archives, compressed files, documents, and\n"
- "more.\n"
- "\n"
- "While still being compatible with the standard GNU/BSD grep command-line\n"
- "options, ugrep supports fuzzy search as well as structured and (adjustable)\n"
- "colored output, piped through \"less\" for pagination. An interactive query\n"
- "UI allows refinement and has a built-in help (press F1). Ugrep implements\n"
- "multi-threaded and other techniques to speed up search, pattern-matching and\n"
- "decompression. Many pre-defined regexps ease searching e.g. C typdefs or XML\n"
- "attributes. Results can be output in several structured or self-defined\n"
- "formats."
- msgstr ""
- #: gnu/packages/serveez.scm:57
- msgid "Framework for implementing IP-based servers"
- msgstr ""
- #: gnu/packages/serveez.scm:59
- msgid ""
- "GNU Serveez is a server framework providing the routines necessary to\n"
- "easily implement IP-based servers in your application. It\n"
- "demonstrates aspects of network programming in a portable manner,\n"
- "making it convenient for both simplifying the process of adding a\n"
- "server to your application or for learning about how network services\n"
- "work. Several example servers are provided already, such as an HTTP\n"
- "server and an IRC server."
- msgstr ""
- #: gnu/packages/shells.scm:109
- msgid "POSIX-compliant shell optimised for size"
- msgstr ""
- #: gnu/packages/shells.scm:111
- msgid ""
- "Dash is a POSIX-compliant @command{/bin/sh} implementation that aims to be\n"
- "as small as possible, often without sacrificing speed. It is faster than the\n"
- "GNU Bourne-Again Shell (@command{bash}) at most scripted tasks. Dash is a\n"
- "direct descendant of NetBSD's Almquist Shell (@command{ash})."
- msgstr ""
- #: gnu/packages/shells.scm:258
- msgid "The friendly interactive shell"
- msgstr ""
- #: gnu/packages/shells.scm:260
- msgid ""
- "Fish (friendly interactive shell) is a shell focused on interactive use,\n"
- "discoverability, and friendliness. Fish has very user-friendly and powerful\n"
- "tab-completion, including descriptions of every completion, completion of\n"
- "strings with wildcards, and many completions for specific commands. It also\n"
- "has extensive and discoverable help. A special @command{help} command gives\n"
- "access to all the fish documentation in your web browser. Other features\n"
- "include smart terminal handling based on terminfo, an easy to search history,\n"
- "and syntax highlighting."
- msgstr ""
- #: gnu/packages/shells.scm:312
- msgid "Foreign environment interface for fish shell"
- msgstr ""
- #: gnu/packages/shells.scm:313
- msgid ""
- "@code{fish-foreign-env} wraps bash script execution in a way\n"
- "that environment variables that are exported or modified get imported back\n"
- "into fish."
- msgstr ""
- #: gnu/packages/shells.scm:347
- msgid "Alternative implementation of the rc shell by Byron Rakitzis"
- msgstr ""
- #: gnu/packages/shells.scm:349
- msgid ""
- "This is a reimplementation by Byron Rakitzis of the Plan 9 shell. It\n"
- "has a small feature set similar to a traditional Bourne shell."
- msgstr ""
- #: gnu/packages/shells.scm:373
- msgid "Extensible shell with higher-order functions"
- msgstr ""
- #: gnu/packages/shells.scm:375
- msgid ""
- "Es is an extensible shell. The language was derived from the Plan 9\n"
- "shell, rc, and was influenced by functional programming languages, such as\n"
- "Scheme, and the Tcl embeddable programming language. This implementation is\n"
- "derived from Byron Rakitzis's public domain implementation of rc, and was\n"
- "written by Paul Haahr and Byron Rakitzis."
- msgstr ""
- #: gnu/packages/shells.scm:451
- msgid "Unix shell based on csh"
- msgstr ""
- #: gnu/packages/shells.scm:453
- msgid ""
- "Tcsh is an enhanced, but completely compatible version of the Berkeley\n"
- "UNIX C shell (csh). It is a command language interpreter usable both as an\n"
- "interactive login shell and a shell script command processor. It includes a\n"
- "command-line editor, programmable word completion, spelling correction, a\n"
- "history mechanism, job control and a C-like syntax."
- msgstr ""
- #: gnu/packages/shells.scm:522
- msgid "Powerful shell for interactive use and scripting"
- msgstr ""
- #: gnu/packages/shells.scm:523
- msgid ""
- "The Z shell (zsh) is a Unix shell that can be used\n"
- "as an interactive login shell and as a powerful command interpreter\n"
- "for shell scripting. Zsh can be thought of as an extended Bourne shell\n"
- "with a large number of improvements, including some features of bash,\n"
- "ksh, and tcsh."
- msgstr ""
- #: gnu/packages/shells.scm:586
- msgid "Python-ish shell"
- msgstr ""
- #: gnu/packages/shells.scm:588
- msgid ""
- "Xonsh is a Python-ish, BASHwards-looking shell language and command\n"
- "prompt. The language is a superset of Python 3.4+ with additional shell\n"
- "primitives that you are used to from Bash and IPython. It works on all major\n"
- "systems including Linux, Mac OSX, and Windows. Xonsh is meant for the daily\n"
- "use of experts and novices alike."
- msgstr ""
- #: gnu/packages/shells.scm:636
- msgid "Unix shell embedded in Scheme"
- msgstr ""
- #: gnu/packages/shells.scm:638
- msgid ""
- "Scsh is a Unix shell embedded in Scheme. Scsh has two main\n"
- "components: a process notation for running programs and setting up pipelines\n"
- "and redirections, and a complete syscall library for low-level access to the\n"
- "operating system."
- msgstr ""
- #: gnu/packages/shells.scm:678
- msgid "Minimal zero-config readline replacement"
- msgstr ""
- #: gnu/packages/shells.scm:680
- msgid ""
- "Linenoise is a minimal, zero-config, readline replacement.\n"
- "Its features include:\n"
- "\n"
- "@enumerate\n"
- "@item Single and multi line editing mode with the usual key bindings\n"
- "@item History handling\n"
- "@item Completion\n"
- "@item Hints (suggestions at the right of the prompt as you type)\n"
- "@item A subset of VT100 escapes, ANSI.SYS compatible\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/shells.scm:742
- msgid "Extremely minimal shell with the simplest syntax possible"
- msgstr ""
- #: gnu/packages/shells.scm:744
- msgid ""
- "S is a new shell that aims to be extremely simple. It does not\n"
- "implement the POSIX shell standard.\n"
- "\n"
- "There are no globs or \"splatting\" where a variable $FOO turns into multiple\n"
- "command line arguments. One token stays one token forever.\n"
- "This is a \"no surprises\" straightforward approach.\n"
- "\n"
- "There are no redirection operators > in the shell language, they are added as\n"
- "extra programs. > is just another unix command, < is essentially cat(1).\n"
- "A @code{andglob} program is also provided along with s."
- msgstr ""
- #: gnu/packages/shells.scm:773
- msgid "Port of OpenBSD Korn Shell"
- msgstr ""
- #: gnu/packages/shells.scm:775
- msgid ""
- "Oksh is a port of the OpenBSD Korn Shell.\n"
- "The OpenBSD Korn Shell is a cleaned up and enhanced ksh."
- msgstr ""
- #: gnu/packages/shells.scm:803
- msgid "Korn Shell from OpenBSD"
- msgstr ""
- #: gnu/packages/shells.scm:805
- msgid ""
- "loksh is a Linux port of OpenBSD's @command{ksh}. It is a small,\n"
- "interactive POSIX shell targeted at resource-constrained systems."
- msgstr ""
- #: gnu/packages/shells.scm:842
- msgid "Korn Shell from MirBSD"
- msgstr ""
- #: gnu/packages/shells.scm:843
- msgid ""
- "mksh is an actively developed free implementation of the\n"
- "Korn Shell programming language and a successor to the Public Domain Korn\n"
- "Shell (pdksh)."
- msgstr ""
- #: gnu/packages/shells.scm:890
- msgid "Programming language and Bash-compatible Unix shell"
- msgstr ""
- #: gnu/packages/shells.scm:891
- msgid ""
- "Oil is a programming language with automatic translation for\n"
- "Bash. It includes osh, a Unix/POSIX shell that runs unmodified Bash\n"
- "scripts."
- msgstr ""
- #: gnu/packages/shells.scm:924
- msgid "POSIX-compatible shell written in Guile Scheme"
- msgstr ""
- #: gnu/packages/shells.scm:925
- msgid ""
- "Gash is a POSIX-compatible shell written in Guile\n"
- "Scheme. It provides both the shell interface, as well as a Guile\n"
- "library for parsing shell scripts. Gash is designed to bootstrap Bash\n"
- "as part of the Guix bootstrap process."
- msgstr ""
- #: gnu/packages/shells.scm:957
- msgid "Core POSIX utilities written in Guile Scheme"
- msgstr ""
- #: gnu/packages/shells.scm:958
- msgid ""
- "Gash-Utils provides Scheme implementations of many\n"
- "common POSIX utilities (there are about 40 of them, ranging in\n"
- "complexity from @command{false} to @command{awk}). The utilities are\n"
- "designed to be capable of bootstrapping their standard GNU counterparts.\n"
- "Underpinning these utilities are many Scheme interfaces for manipulating\n"
- "files and text."
- msgstr ""
- #: gnu/packages/shells.scm:1030
- msgid "Shell with a structured approach to the command line"
- msgstr ""
- #: gnu/packages/shells.scm:1032
- msgid ""
- "Nu draws inspiration from projects like PowerShell, functional\n"
- "programming languages, and modern CLI tools. Rather than thinking of files\n"
- "and services as raw streams of text, Nu looks at each input as something with\n"
- "structure. For example, when you list the contents of a directory, what you\n"
- "get back is a table of rows, where each row represents an item in that\n"
- "directory. These values can be piped through a series of steps, in a series\n"
- "of commands called a ``pipeline''."
- msgstr ""
- #: gnu/packages/shells.scm:1061
- msgid "Library for ANSI terminal colors and styles (bold, underline)"
- msgstr ""
- #: gnu/packages/shells.scm:1063
- msgid ""
- "This package is a library for ANSI terminal colors and styles (bold,\n"
- "underline)."
- msgstr ""
- #: gnu/packages/shells.scm:1105 gnu/packages/shells.scm:1106
- #: gnu/packages/shells.scm:1204 gnu/packages/shells.scm:1205
- #: gnu/packages/shells.scm:1279 gnu/packages/shells.scm:1280
- msgid "CLI for nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1235 gnu/packages/shells.scm:1236
- msgid "Completions for nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1337 gnu/packages/shells.scm:1338
- msgid "Core commands for nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1370 gnu/packages/shells.scm:1371
- msgid "Core error subsystem for Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1395
- msgid "Fork of @code{serde-hjson}"
- msgstr ""
- #: gnu/packages/shells.scm:1396
- msgid "This package is a fork of @code{serde-hjson}."
- msgstr ""
- #: gnu/packages/shells.scm:1428 gnu/packages/shells.scm:1429
- #: gnu/packages/shells.scm:1449 gnu/packages/shells.scm:1450
- msgid "Nushell parser"
- msgstr ""
- #: gnu/packages/shells.scm:1478 gnu/packages/shells.scm:1479
- msgid "Nushell Plugin"
- msgstr ""
- #: gnu/packages/shells.scm:1508
- msgid "Binary viewer plugin for Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1510
- msgid "This package provides a binary viewer plugin for Nushell."
- msgstr ""
- #: gnu/packages/shells.scm:1537
- msgid "Plugin to display charts"
- msgstr ""
- #: gnu/packages/shells.scm:1539
- msgid "This package provides a plugin to display charts in Nushell."
- msgstr ""
- #: gnu/packages/shells.scm:1564 gnu/packages/shells.scm:1593
- #: gnu/packages/shells.scm:1813 gnu/packages/shells.scm:1842
- msgid "Converter plugin to the bson format for Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1566 gnu/packages/shells.scm:1595
- #: gnu/packages/shells.scm:1815 gnu/packages/shells.scm:1844
- msgid ""
- "This package provides a converter plugin to the bson format for\n"
- "Nushell."
- msgstr ""
- #: gnu/packages/shells.scm:1622
- msgid "Version incrementer plugin for Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1624
- msgid ""
- "This package provides a version incrementer plugin for\n"
- "Nushell."
- msgstr ""
- #: gnu/packages/shells.scm:1648
- msgid "Regex match plugin for Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1650
- msgid "This package provides a regex match plugin for Nushell."
- msgstr ""
- #: gnu/packages/shells.scm:1674
- msgid "Query JSON files with Gjson"
- msgstr ""
- #: gnu/packages/shells.scm:1675
- msgid "query json files with gjson"
- msgstr ""
- #: gnu/packages/shells.scm:1700
- msgid "S3 plugin for Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1701
- msgid "This package is an S3 plugin for Nushell."
- msgstr ""
- #: gnu/packages/shells.scm:1725
- msgid "Web scraping using CSS selector"
- msgstr ""
- #: gnu/packages/shells.scm:1727
- msgid "This package provides web scraping using CSS selector."
- msgstr ""
- #: gnu/packages/shells.scm:1756
- msgid "Plugin to open files/URLs directly from Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1758
- msgid ""
- "This package provides a plugin to open files/URLs directly from\n"
- "Nushell."
- msgstr ""
- #: gnu/packages/shells.scm:1786
- msgid "Text viewer plugin for Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1787
- msgid ""
- "This package provides a text viewer plugin for\n"
- "Nushell."
- msgstr ""
- #: gnu/packages/shells.scm:1869
- msgid "Tree viewer plugin for Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1870
- msgid ""
- "This package provides a tree viewer plugin for\n"
- "Nushell."
- msgstr ""
- #: gnu/packages/shells.scm:1898 gnu/packages/shells.scm:1899
- msgid "Traverses XML"
- msgstr ""
- #: gnu/packages/shells.scm:1921
- msgid "Pretty hex dump of bytes slice in the common style"
- msgstr ""
- #: gnu/packages/shells.scm:1923
- msgid ""
- "This crate provides pretty hex dump of bytes slice in the common\n"
- "style."
- msgstr ""
- #: gnu/packages/shells.scm:1959 gnu/packages/shells.scm:1960
- msgid "Core values and protocols for Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:1985
- msgid "Turn any value into a @code{nu-protocol::Value} with Serde"
- msgstr ""
- #: gnu/packages/shells.scm:1987
- msgid ""
- "This crate turns any value into a @code{nu-protocol::Value} with\n"
- "Serde."
- msgstr ""
- #: gnu/packages/shells.scm:2012
- msgid "Source string characterizer for Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:2014
- msgid ""
- "This package provides a source string characterizer for\n"
- "Nushell."
- msgstr ""
- #: gnu/packages/shells.scm:2037
- msgid "Nushell stream"
- msgstr ""
- #: gnu/packages/shells.scm:2038
- msgid "This package provides Nushell stream."
- msgstr ""
- #: gnu/packages/shells.scm:2062 gnu/packages/shells.scm:2063
- msgid "Nushell table printing"
- msgstr ""
- #: gnu/packages/shells.scm:2094
- msgid "Support for writing Nushell tests"
- msgstr ""
- #: gnu/packages/shells.scm:2095
- msgid ""
- "This package provides support for writing Nushell\n"
- "tests."
- msgstr ""
- #: gnu/packages/shells.scm:2122
- msgid "@code{Extension} traits for values in Nushell"
- msgstr ""
- #: gnu/packages/shells.scm:2124
- msgid ""
- "This package provides @code{Extension} traits for values in\n"
- "Nushell."
- msgstr ""
- #: gnu/packages/telephony.scm:130
- msgid "Phone Simulator for modem testing"
- msgstr ""
- #: gnu/packages/telephony.scm:132
- msgid ""
- "Phonesim is a modem emulator that oFono uses for development and\n"
- "testing. This allows oFono to be used by any host without requiring special\n"
- "GSM (or other) hardware."
- msgstr ""
- #: gnu/packages/telephony.scm:160
- msgid "Libre iLBC codec"
- msgstr ""
- #: gnu/packages/telephony.scm:161
- msgid ""
- "LibiLBC is a packaging friendly copy of the iLBC codec from\n"
- "the WebRTC project. It provides a base for distribution packages and can be\n"
- "used as drop-in replacement for the non-free code from RFC 3591."
- msgstr ""
- #: gnu/packages/telephony.scm:248
- msgid "DSP library for telephony"
- msgstr ""
- #: gnu/packages/telephony.scm:249
- msgid ""
- "SpanDSP is a library of DSP functions for telephony, in the\n"
- "8000 sample per second world of E1s, T1s, and higher order PCM channels. It\n"
- "contains low level functions, such as basic filters. It also contains higher\n"
- "level functions, such as cadenced supervisory tone detection, and a complete\n"
- "software FAX machine."
- msgstr ""
- #: gnu/packages/telephony.scm:278
- msgid "(u)Common C++ framework for threaded applications"
- msgstr ""
- #: gnu/packages/telephony.scm:279
- msgid ""
- "GNU Common C++ is an portable, optimized class framework for\n"
- "threaded applications, supporting concurrent synchronization, inter-process\n"
- "communications via sockets, and various methods for data handling, such as\n"
- "serialization and XML parsing. It includes the uCommon C++ library, a smaller\n"
- "reimplementation."
- msgstr ""
- #: gnu/packages/telephony.scm:301
- msgid "Common C++ framework for threaded applications"
- msgstr ""
- #: gnu/packages/telephony.scm:302
- msgid ""
- "GNU uCommon C++ is meant as a very light-weight C++ library\n"
- "to facilitate using C++ design patterns even for very deeply embedded\n"
- "applications, such as for systems using uclibc along with posix threading\n"
- "support."
- msgstr ""
- #: gnu/packages/telephony.scm:323
- msgid "Implementation of RTP (real-time transport protocol)"
- msgstr ""
- #: gnu/packages/telephony.scm:324
- msgid ""
- "GNU ccRTP is an implementation of RTP, the real-time transport\n"
- "protocol from the IETF. It is suitable both for high capacity servers and\n"
- "personal client applications. It is flexible in its design, allowing it to\n"
- "function as a framework for the framework, rather than just being a\n"
- "packet-manipulation library."
- msgstr ""
- #: gnu/packages/telephony.scm:356
- msgid "C++ Implementation of ZRTP protocol"
- msgstr ""
- #: gnu/packages/telephony.scm:357
- msgid ""
- "GNU ZRTP C++ provides a library that adds ZRTP support to the\n"
- "GNU ccRTP stack and serves as library for other RTP stacks\n"
- "(PJSIP, GStreamer)."
- msgstr ""
- #: gnu/packages/telephony.scm:376
- msgid "Library implementing SIP (RFC-3261)"
- msgstr ""
- #: gnu/packages/telephony.scm:377
- msgid ""
- "GNU oSIP is an implementation of the SIP protocol. It is\n"
- "used to provide multimedia and telecom software developers with an interface\n"
- "to initiate and control SIP sessions."
- msgstr ""
- #: gnu/packages/telephony.scm:398
- msgid "Sip abstraction library"
- msgstr ""
- #: gnu/packages/telephony.scm:399
- msgid ""
- "EXosip is a library that hides the complexity of using the\n"
- "SIP protocol for multimedia session establishment. This protocol is mainly to\n"
- "be used by VoIP telephony applications (endpoints or conference server) but\n"
- "might be also useful for any application that wish to establish sessions like\n"
- "multiplayer games."
- msgstr ""
- #: gnu/packages/telephony.scm:440
- msgid "Secure peer-to-peer VoIP server for the SIP protocol"
- msgstr ""
- #: gnu/packages/telephony.scm:441
- msgid ""
- "GNU SIP Witch is a peer-to-peer Voice-over-IP server that\n"
- "uses the SIP protocol. Calls can be made from behind NAT firewalls and\n"
- "without the need for a service provider. Its peer-to-peer design ensures that\n"
- "there is no central point for media intercept or capture and thus it can be\n"
- "used to construct a secure telephone system that operates over the public\n"
- "internet."
- msgstr ""
- #: gnu/packages/telephony.scm:481
- msgid "Secure RTP (SRTP) Reference Implementation"
- msgstr ""
- #: gnu/packages/telephony.scm:483
- msgid ""
- "This package provides an implementation of the Secure Real-time Transport\n"
- "Protocol (@dfn{SRTP}), the Universal Security Transform (@dfn{UST}), and a\n"
- "supporting cryptographic kernel."
- msgstr ""
- #: gnu/packages/telephony.scm:509
- msgid "Inter-Asterisk-Protocol library"
- msgstr ""
- #: gnu/packages/telephony.scm:510
- msgid ""
- "LibIAX2 implements the Inter-Asterisk-Protocol for relaying\n"
- "Voice-over-IP (VoIP) communications."
- msgstr ""
- #: gnu/packages/telephony.scm:537
- msgid "Simple VoIP program to create conferences from the terminal"
- msgstr ""
- #: gnu/packages/telephony.scm:539
- msgid ""
- "Seren is a simple VoIP program based on the Opus codec that allows you\n"
- "to create a voice conference from the terminal, with up to 10 participants,\n"
- "without having to register accounts, exchange emails, or add people to contact\n"
- "lists. All you need to join an existing conference is the host name or IP\n"
- "address of one of the participants."
- msgstr ""
- #: gnu/packages/telephony.scm:663
- msgid "Low-latency, high quality voice chat software"
- msgstr ""
- #: gnu/packages/telephony.scm:665
- msgid ""
- "Mumble is an low-latency, high quality voice chat\n"
- "software primarily intended for use while gaming.\n"
- "Mumble consists of two applications for separate usage:\n"
- "@code{mumble} for the client, and @code{murmur} for the server."
- msgstr ""
- #: gnu/packages/telephony.scm:721
- msgid "Softphone for voice over IP and instant messaging"
- msgstr ""
- #: gnu/packages/telephony.scm:722
- msgid ""
- "Twinkle is a softphone for your voice over IP and instant\n"
- "messaging communcations using the SIP protocol. You can use it for direct\n"
- "IP phone to IP phone communication or in a network using a SIP proxy to route\n"
- "your calls and messages."
- msgstr ""
- #: gnu/packages/telephony.scm:856
- msgid "Session Initiation Protocol (SIP) stack"
- msgstr ""
- #: gnu/packages/telephony.scm:857
- msgid ""
- "PJProject provides an implementation of the Session\n"
- "Initiation Protocol (SIP) and a multimedia framework."
- msgstr ""
- #: gnu/packages/telephony.scm:898
- msgid "VoIP library for Telegram clients"
- msgstr ""
- #: gnu/packages/telephony.scm:899
- msgid ""
- "A collection of libraries and header files for implementing\n"
- "telephony functionality into custom Telegram clients."
- msgstr ""
- #: gnu/packages/telephony.scm:925
- msgid "Implementation of a TURN and STUN server for VoIP"
- msgstr ""
- #: gnu/packages/telephony.scm:927
- msgid ""
- "This package provides a VoIP media traffic NAT traversal server and\n"
- "gateway. It implements the STUN (Session Traversal Utilities for NAT) and\n"
- "TURN (Traversal Using Relays around NAT) server protocols."
- msgstr ""
- #: gnu/packages/telephony.scm:967
- msgid "Libraries for sharing common code between osmocom projects"
- msgstr ""
- #: gnu/packages/telephony.scm:969
- msgid ""
- "Libosmocore includes several libraries:\n"
- "@itemize\n"
- "@item libosmocore: general-purpose functions\n"
- "@item libosmovty: interactive VTY command-line interface\n"
- "@item libosmogsm: definitions and helper code related to GSM protocols\n"
- "@item libosmoctrl: shared implementation of the Osmocom control interface\n"
- "@item libosmogb: implementation of the Gb interface with its NS/BSSGP protocols\n"
- "@item libosmocodec: implementation of GSM voice codecs\n"
- "@item libosmocoding: implementation of GSM 05.03 burst transcoding functions\n"
- "@item libosmosim: infrastructure to interface with SIM/UICC/USIM cards\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/telephony.scm:1016
- msgid "Displays cellular network protocol traces in Wireshark"
- msgstr ""
- #: gnu/packages/telephony.scm:1018
- msgid ""
- "xgoldmon is an utility that converts the USB logging mode\n"
- "messages that various Intel/Infineon XGold modems send to the USB port to\n"
- "gsmtap. It then then sends them to a given IP address to enable users\n"
- "to view cellular network protocol traces in Wireshark.\n"
- "\n"
- "It supports the following smartphones:\n"
- "@itemize\n"
- "@item Samsung Galaxy S4, GT-I9500 variant\n"
- "@item Samsung Galaxy SIII, GT-I9300 variant\n"
- "@item Samsung Galaxy Nexus, GT-I9250 variant\n"
- "@item Samsung Galaxy SII, GT-I9100 variant\n"
- "@item Samsung Galaxy Note II, GT-N7100 variant\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/tex.scm:560 gnu/packages/tex.scm:8030 gnu/packages/tex.scm:8093
- msgid "TeX Live, a package of the TeX typesetting system"
- msgstr ""
- #: gnu/packages/tex.scm:562
- msgid ""
- "TeX Live provides a comprehensive TeX document production system.\n"
- "It includes all the major TeX-related programs, macro packages, and fonts\n"
- "that are free software, including support for many languages around the\n"
- "world.\n"
- "\n"
- "This package contains the binaries."
- msgstr ""
- #: gnu/packages/tex.scm:611
- msgid "Bidirectional typesetting in plain TeX and LaTeX using XeTeX"
- msgstr ""
- #: gnu/packages/tex.scm:612
- msgid ""
- "The @code{bidi} package provides a convenient interface for\n"
- "typesetting bidirectional texts with plain TeX and LaTeX. The package\n"
- "includes adaptations for use with many other commonly-used packages."
- msgstr ""
- #: gnu/packages/tex.scm:646
- msgid "Path searching library"
- msgstr ""
- #: gnu/packages/tex.scm:647
- msgid ""
- "kpathsea is a library, whose purpose is to return a filename\n"
- "from a list of user-specified directories similar to how shells look up\n"
- "executables. It is maintained as a part of TeX Live."
- msgstr ""
- #: gnu/packages/tex.scm:666
- msgid "Utility to strip documentation from TeX files"
- msgstr ""
- #: gnu/packages/tex.scm:667
- msgid ""
- "This package provides the docstrip utility to strip\n"
- "documentation from TeX files. It is part of the LaTeX base."
- msgstr ""
- #: gnu/packages/tex.scm:681
- msgid "Control the behaviour of @samp{_} in text"
- msgstr ""
- #: gnu/packages/tex.scm:682
- msgid ""
- "This package causes @code{\\_} in text mode (i.e.,\n"
- "@code{\\textunderscore}) to print an underscore so that hyphenation of words\n"
- "either side of it is not affected; a package option controls whether an actual\n"
- "hyphenation point appears after the underscore, or merely a break point. The\n"
- "package also arranges that, while in text, @samp{_} itself behaves as\n"
- "@code{\\textunderscore} (the behaviour of @samp{_} in maths mode is not\n"
- "affected)."
- msgstr ""
- #: gnu/packages/tex.scm:701
- msgid "Unicode data and loaders for TeX"
- msgstr ""
- #: gnu/packages/tex.scm:702
- msgid ""
- "This bundle provides generic access to Unicode Consortium\n"
- "data for TeX use. It contains a set of text files provided by the Unicode\n"
- "Consortium which are currently all from Unicode 8.0.0, with the exception of\n"
- "@code{MathClass.txt} which is not currently part of the Unicode Character\n"
- "Database. Accompanying these source data are generic TeX loader files\n"
- "allowing this data to be used as part of TeX runs, in particular in building\n"
- "format files. Currently there are two loader files: one for general character\n"
- "set up and one for initializing XeTeX character classes as has been carried\n"
- "out to date by @code{unicode-letters.tex}."
- msgstr ""
- #: gnu/packages/tex.scm:733
- msgid "Core hyphenation support files"
- msgstr ""
- #: gnu/packages/tex.scm:734
- msgid ""
- "This package includes Knuth's original @file{hyphen.tex},\n"
- "@file{zerohyph.tex} to disable hyphenation, @file{language.us} which starts\n"
- "the autogenerated files @file{language.dat} and @file{language.def} (and\n"
- "default versions of those), etc."
- msgstr ""
- #: gnu/packages/tex.scm:754
- msgid "DVI to PostScript drivers"
- msgstr ""
- #: gnu/packages/tex.scm:755
- msgid ""
- "This package provides files needed for converting DVI files\n"
- "to PostScript."
- msgstr ""
- #: gnu/packages/tex.scm:768
- msgid "Files for creating TeX formats"
- msgstr ""
- #: gnu/packages/tex.scm:769
- msgid ""
- "This bundle provides a collection of model \".ini\" files\n"
- "for creating TeX formats. These files are commonly used to introduced\n"
- "distribution-dependent variations in formats. They are also used to\n"
- "allow existing format source files to be used with newer engines, for example\n"
- "to adapt the plain e-TeX source file to work with XeTeX and LuaTeX."
- msgstr ""
- #: gnu/packages/tex.scm:831
- msgid "Metafont base files"
- msgstr ""
- #: gnu/packages/tex.scm:832
- msgid ""
- "This package provides the Metafont base files needed to\n"
- "build fonts using the Metafont system."
- msgstr ""
- #: gnu/packages/tex.scm:916
- msgid "Tools for converting and installing fonts for TeX and LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:917
- msgid ""
- "This package provides TeX macros for converting Adobe Font\n"
- "Metric files to TeX metric and virtual font format. Fontinst helps mainly\n"
- "with the number crunching and shovelling parts of font installation. This\n"
- "means in practice that it creates a number of files which give the TeX\n"
- "metrics (and related information) for a font family that TeX needs to do any\n"
- "typesetting in these fonts."
- msgstr ""
- #: gnu/packages/tex.scm:937
- msgid "Scheme for naming fonts in TeX"
- msgstr ""
- #: gnu/packages/tex.scm:938
- msgid ""
- "This is Fontname, a naming scheme for (the base part of)\n"
- "external TeX font filenames. This makes at most eight-character names\n"
- "from (almost) arbitrarily complex font names, thus helping portability of TeX\n"
- "documents."
- msgstr ""
- #: gnu/packages/tex.scm:955
- msgid "Complete set of Greek fonts"
- msgstr ""
- #: gnu/packages/tex.scm:956
- msgid ""
- "This bundle presents the whole of Beccari's original Greek\n"
- "font set, which use the @i{Lispiakos} font shape derived from the shape of the\n"
- "fonts used in printers' shops in Lispia. The fonts are available both as\n"
- "Metafont source and in Adobe Type 1 format, and at the same wide set of design\n"
- "sizes as are such font sets as the EC fonts."
- msgstr ""
- #: gnu/packages/tex.scm:973
- msgid "LaTeX font description files for the CB Greek fonts"
- msgstr ""
- #: gnu/packages/tex.scm:974
- msgid ""
- "The package provides font description files for all the many\n"
- "shapes available from the cbfonts collection. The files provide the means\n"
- "whereby the @acronym{NFSS, New Font Selection Scheme} knows which fonts a\n"
- "LaTeX user is requesting.\n"
- "\n"
- "Tip: installing @code{texlive-cbfonts} will automatically propagate this one."
- msgstr ""
- #: gnu/packages/tex.scm:992
- msgid "Improved citation handling in LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:994
- msgid ""
- "The package supports compressed, sorted lists of numerical citations,\n"
- "and also deals with various punctuation and other issues of representation,\n"
- "including comprehensive management of break points. The package is compatible\n"
- "with both hyperref and backref. The package is (unsurprisingly) part of the\n"
- "cite bundle of the author's citation-related packages."
- msgstr ""
- #: gnu/packages/tex.scm:1068
- msgid "Computer Modern fonts for TeX"
- msgstr ""
- #: gnu/packages/tex.scm:1069
- msgid ""
- "This package provides the Computer Modern fonts by Donald\n"
- "Knuth. The Computer Modern font family is a large collection of text,\n"
- "display, and mathematical fonts in a range of styles, based on Monotype Modern\n"
- "8A."
- msgstr ""
- #: gnu/packages/tex.scm:1090
- msgid "Type 1 CM-based fonts for Latin, Greek and Cyrillic"
- msgstr ""
- #: gnu/packages/tex.scm:1091
- msgid ""
- "The fonts are converted from Metafont sources of the\n"
- "Computer Modern font families, using @command{textrace}. Supported encodings\n"
- "are: T1 (Latin), T2A (Cyrillic), LGR (Greek) and TS1. The package also\n"
- "includes Unicode virtual fonts for use with Omega. The font set is not a\n"
- "replacement for any of the other Computer Modern-based font sets (for example,\n"
- "cm-super for Latin and Cyrillic, or cbgreek for Greek), since it is available\n"
- "at a single size only; it offers a compact set for @i{general} working. The\n"
- "fonts themselves are encoded to external standards, and virtual fonts are\n"
- "provided for use with TeX."
- msgstr ""
- #: gnu/packages/tex.scm:1124
- msgid "Computer Modern Super family of fonts"
- msgstr ""
- #: gnu/packages/tex.scm:1125
- msgid ""
- "The CM-Super family provides Adobe Type 1 fonts that replace\n"
- "the T1/TS1-encoded Computer Modern (EC/TC), T1/TS1-encoded Concrete,\n"
- "T1/TS1-encoded CM bright and LH Cyrillic fonts (thus supporting all European\n"
- "languages except Greek), and bringing many ameliorations in typesetting\n"
- "quality. The fonts exhibit the same metrics as the METAFONT-encoded\n"
- "originals."
- msgstr ""
- #: gnu/packages/tex.scm:1157 gnu/packages/tex.scm:1663
- #: gnu/packages/tex.scm:6592 gnu/packages/tex.scm:6620
- #: gnu/packages/tex.scm:6645 gnu/packages/tex.scm:10132
- msgid "URW Base 35 font pack for LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:1158
- msgid ""
- "This package provides a drop-in replacements for the Courier\n"
- "font from Adobe's basic set."
- msgstr ""
- #: gnu/packages/tex.scm:1179
- msgid "TeX fonts extending URW fonts"
- msgstr ""
- #: gnu/packages/tex.scm:1181
- msgid ""
- "The TeX-GYRE bundle consist of multiple font families:\n"
- "@itemize @bullet\n"
- "@item Adventor, based on the URW Gothic L family of fonts;\n"
- "@item Bonum, based on the URW Bookman L family;\n"
- "@item Chorus, based on URW Chancery L Medium Italic;\n"
- "@item Cursor, based on URW Nimbus Mono L;\n"
- "@item Heros, based on URW Nimbus Sans L;\n"
- "@item Pagella, based on URW Palladio L;\n"
- "@item Schola, based on the URW Century Schoolbook L family;\n"
- "@item Termes, based on the URW Nimbus Roman No9 L family of fonts.\n"
- "@end itemize\n"
- "\n"
- "The constituent standard faces of each family have been greatly extended\n"
- "(though Chorus omits Greek support and has no small-caps family). Each\n"
- "family is available in Adobe Type 1 and Open Type formats, and LaTeX\n"
- "support (for use with a variety of encodings) is provided."
- msgstr ""
- #: gnu/packages/tex.scm:1219
- msgid "Latin Modern family of fonts"
- msgstr ""
- #: gnu/packages/tex.scm:1220
- msgid ""
- "The Latin Modern fonts are derived from the famous Computer\n"
- "Modern fonts designed by Donald E. Knuth and described in Volume E of his\n"
- "Computers & Typesetting series."
- msgstr ""
- #: gnu/packages/tex.scm:1240
- msgid "OpenType maths fonts for Latin Modern"
- msgstr ""
- #: gnu/packages/tex.scm:1241
- msgid ""
- "Latin Modern Math is a maths companion for the Latin Modern\n"
- "family of fonts, in OpenType format. For use with LuaLaTeX or XeLaTeX,\n"
- "support is available from the @code{unicode-math} package."
- msgstr ""
- #: gnu/packages/tex.scm:1300
- msgid "Small library of METAFONT sources"
- msgstr ""
- #: gnu/packages/tex.scm:1301
- msgid ""
- "This is a collection of core TeX and METAFONT macro files\n"
- "from Donald Knuth, including the plain format, plain base, and the MF logo\n"
- "fonts."
- msgstr ""
- #: gnu/packages/tex.scm:1375
- msgid "Collection of fonts used in LaTeX distributions"
- msgstr ""
- #: gnu/packages/tex.scm:1376
- msgid ""
- "This is a collection of fonts for use with standard LaTeX\n"
- "packages and classes. It includes invisible fonts (for use with the slides\n"
- "class), line and circle fonts (for use in the picture environment) and LaTeX\n"
- "symbol fonts."
- msgstr ""
- #: gnu/packages/tex.scm:1446
- msgid "LaTeX support for Metafont logo fonts"
- msgstr ""
- #: gnu/packages/tex.scm:1448
- msgid ""
- "This package provides LaTeX and font definition files to access the\n"
- "Knuthian mflogo fonts described in The Metafontbook and to typeset Metafont\n"
- "logos in LaTeX documents."
- msgstr ""
- #: gnu/packages/tex.scm:1467
- msgid "Metafont logo font"
- msgstr ""
- #: gnu/packages/tex.scm:1469
- msgid ""
- "These fonts were created in METAFONT by Knuth, for his own publications.\n"
- "At some stage, the letters P and S were added, so that the METAPOST logo could\n"
- "also be expressed. The fonts were originally issued (of course) as METAFONT\n"
- "source; they have since been autotraced and reissued in Adobe Type 1 format by\n"
- "Taco Hoekwater."
- msgstr ""
- #: gnu/packages/tex.scm:1511
- msgid "TeX fonts from the American Mathematical Society"
- msgstr ""
- #: gnu/packages/tex.scm:1513
- msgid ""
- "This package provides an extended set of fonts for use in mathematics,\n"
- "including: extra mathematical symbols; blackboard bold letters (uppercase\n"
- "only); fraktur letters; subscript sizes of bold math italic and bold Greek\n"
- "letters; subscript sizes of large symbols such as sum and product; added sizes\n"
- "of the Computer Modern small caps font; cyrillic fonts (from the University of\n"
- "Washington); Euler mathematical fonts. All fonts are provided as Adobe Type 1\n"
- "files, and all except the Euler fonts are provided as Metafont source. The\n"
- "distribution also includes the canonical Type 1 versions of the Computer\n"
- "Modern family of fonts. The Euler fonts are supported by separate packages;\n"
- "details can be found in the documentation."
- msgstr ""
- #: gnu/packages/tex.scm:1542
- msgid "Utility for making hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:1543
- msgid ""
- "Mkpattern is a general purpose program for the generation of\n"
- "hyphenation patterns, with definition of letter sets and template-like\n"
- "constructions. It also provides an easy way to handle different input and\n"
- "output encodings, and features generation of clean UTF-8 patterns."
- msgstr ""
- #: gnu/packages/tex.scm:1598
- msgid "Extended version of TeX"
- msgstr ""
- #: gnu/packages/tex.scm:1600
- msgid ""
- "This package provides an extended version of TeX (which is capable of\n"
- "running as if it were TeX unmodified). E-TeX has been specified by the LaTeX\n"
- "team as the engine for the development of LaTeX2e; as a result, LaTeX\n"
- "programmers may assume e-TeX functionality. The pdftex engine directly\n"
- "incorporates the e-TeX extensions."
- msgstr ""
- #: gnu/packages/tex.scm:1616
- msgid "Plain TeX format and supporting files"
- msgstr ""
- #: gnu/packages/tex.scm:1618
- msgid ""
- "This package contains files used to build the Plain TeX format, as\n"
- "described in the TeXbook, together with various supporting files (some also\n"
- "discussed in the book)."
- msgstr ""
- #: gnu/packages/tex.scm:1634
- msgid "Hard wrap text to a certain character length"
- msgstr ""
- #: gnu/packages/tex.scm:1636
- msgid ""
- "The package facilitates wrapping text to a specific character width, breaking\n"
- "lines by words rather than, as done by TeX, by characters. The primary use for\n"
- "these facilities is to aid the generation of messages sent to the log file or\n"
- "console output to display messages to the user. Package authors may also find\n"
- "this useful when writing out arbitrary text to an external file."
- msgstr ""
- #: gnu/packages/tex.scm:1664
- msgid ""
- "This package provides a drop-in replacements for the Helvetica\n"
- "font from Adobe's basic set."
- msgstr ""
- #: gnu/packages/tex.scm:1676
- msgid "Hyphenation patterns for Afrikaans"
- msgstr ""
- #: gnu/packages/tex.scm:1677
- msgid ""
- "The package provides hyphenation patterns for the Afrikaans\n"
- "language."
- msgstr ""
- #: gnu/packages/tex.scm:1690
- msgid "Hyphenation patterns for ancient Greek"
- msgstr ""
- #: gnu/packages/tex.scm:1691
- msgid ""
- "The package provides hyphenation patterns for ancient\n"
- "Greek."
- msgstr ""
- #: gnu/packages/tex.scm:1703
- msgid "Hyphenation patterns for Armenian"
- msgstr "아르메니아인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:1704
- msgid ""
- "The package provides hyphenation patterns for the Armenian\n"
- "language."
- msgstr ""
- #: gnu/packages/tex.scm:1717
- msgid "Hyphenation patterns for Basque"
- msgstr ""
- #: gnu/packages/tex.scm:1718
- msgid ""
- "The package provides hyphenation patterns for the Basque\n"
- "language."
- msgstr ""
- #: gnu/packages/tex.scm:1731
- msgid "Hyphenation patterns for Belarusian"
- msgstr "벨라루스인을 위해 하이픈 유형"
- #: gnu/packages/tex.scm:1732
- msgid ""
- "The package provides hyphenation patterns for the Belarusian\n"
- "language."
- msgstr ""
- #: gnu/packages/tex.scm:1743
- msgid "Hyphenation patterns for Bulgarian"
- msgstr "불가리아인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:1744
- msgid ""
- "The package provides hyphenation patterns for the Bulgarian\n"
- "language in T2A and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1757
- msgid "Hyphenation patterns for Catalan"
- msgstr "카탈로니아인를 위한 하이픈 유형"
- #: gnu/packages/tex.scm:1758
- msgid ""
- "The package provides hyphenation patterns for Catalan in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1770
- msgid "Hyphenation patterns for unaccented Chinese pinyin"
- msgstr ""
- #: gnu/packages/tex.scm:1771
- msgid ""
- "The package provides hyphenation patterns for unaccented\n"
- "Chinese pinyin T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1782
- msgid "Hyphenation patterns for Church Slavonic"
- msgstr ""
- #: gnu/packages/tex.scm:1783
- msgid ""
- "The package provides hyphenation patterns for Church\n"
- "Slavonic in UTF-8 encoding."
- msgstr ""
- #: gnu/packages/tex.scm:1795
- msgid "Hyphenation patterns for Coptic"
- msgstr ""
- #: gnu/packages/tex.scm:1796
- msgid ""
- "The package provides hyphenation patterns for Coptic in\n"
- "UTF-8 encoding as well as in ASCII-based encoding for 8-bit engines."
- msgstr ""
- #: gnu/packages/tex.scm:1808
- msgid "Hyphenation patterns for Croatian"
- msgstr "크로아티아인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:1809
- msgid ""
- "The package provides hyphenation patterns for Croatian in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1820
- msgid "Hyphenation patterns for Czech"
- msgstr ""
- #: gnu/packages/tex.scm:1821
- msgid ""
- "The package provides hyphenation patterns for Czech in T1/EC\n"
- "and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1832
- msgid "Hyphenation patterns for Danish"
- msgstr "덴마크인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:1833
- msgid ""
- "The package provides hyphenation patterns for Danish in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1845
- msgid "Hyphenation patterns for Dutch"
- msgstr ""
- #: gnu/packages/tex.scm:1846
- msgid ""
- "The package provides hyphenation patterns for Dutch in T1/EC\n"
- "and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1858
- msgid "Hyphenation patterns for American and British English"
- msgstr ""
- #: gnu/packages/tex.scm:1859
- msgid ""
- "The package provides additional hyphenation patterns for\n"
- "American and British English in ASCII encoding."
- msgstr ""
- #: gnu/packages/tex.scm:1872
- msgid "Hyphenation patterns for Esperanto"
- msgstr ""
- #: gnu/packages/tex.scm:1873
- msgid ""
- "The package provides hyphenation patterns for Esperanto ISO\n"
- "Latin 3 and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1884
- msgid "Hyphenation patterns for Estonian"
- msgstr "에스토니아인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:1885
- msgid ""
- "The package provides hyphenation patterns for Estonian in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1898
- msgid "Hyphenation patterns for Ethiopic scripts"
- msgstr ""
- #: gnu/packages/tex.scm:1899
- msgid ""
- "The package provides hyphenation patterns for languages\n"
- "written using the Ethiopic script for Unicode engines. They are not supposed\n"
- "to be linguistically relevant in all cases and should, for proper typography,\n"
- "be replaced by files tailored to individual languages."
- msgstr ""
- #: gnu/packages/tex.scm:1912
- msgid "Hyphenation patterns for Finnish"
- msgstr ""
- #: gnu/packages/tex.scm:1913
- msgid ""
- "The package provides hyphenation patterns for Finnish in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1924
- msgid "Hyphenation patterns for Finnish for school"
- msgstr ""
- #: gnu/packages/tex.scm:1925
- msgid ""
- "The package provides hyphenation patterns for Finnish for\n"
- "school in T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1936
- msgid "Hyphenation patterns for French"
- msgstr ""
- #: gnu/packages/tex.scm:1937
- msgid ""
- "The package provides hyphenation patterns for French in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1948
- msgid "Hyphenation patterns for Friulan"
- msgstr "프리울리인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:1949
- msgid ""
- "The package provides hyphenation patterns for Friulan in\n"
- "ASCII encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1961
- msgid "Hyphenation patterns for Galician"
- msgstr "갈리시아인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:1962
- msgid ""
- "The package provides hyphenation patterns for Galician in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1973
- msgid "Hyphenation patterns for Georgian"
- msgstr "조지아인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:1974
- msgid ""
- "The package provides hyphenation patterns for Georgian in\n"
- "T8M, T8K, and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:1991 gnu/packages/tex.scm:2651
- msgid "Hyphenation patterns for German"
- msgstr "독일인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:1992
- msgid ""
- "This package provides hyphenation patterns for German in\n"
- "T1/EC and UTF-8 encodings, for traditional and reformed spelling, including\n"
- "Swiss German."
- msgstr ""
- #: gnu/packages/tex.scm:2010
- msgid "Hyphenation patterns for Greek"
- msgstr ""
- #: gnu/packages/tex.scm:2011
- msgid ""
- "This package provides hyphenation patterns for Modern Greek\n"
- "in monotonic and polytonic spelling in LGR and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2024
- msgid "Hyphenation patterns for Hungarian"
- msgstr "헝가리인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:2025
- msgid ""
- "This package provides hyphenation patterns for Hungarian in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2037
- msgid "Hyphenation patterns for Icelandic"
- msgstr "아이슬란드인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:2038
- msgid ""
- "This package provides hyphenation patterns for Icelandic in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2060
- msgid "Indic hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2061
- msgid ""
- "This package provides hyphenation patterns for Assamese,\n"
- "Bengali, Gujarati, Hindi, Kannada, Malayalam, Marathi, Oriya, Panjabi, Tamil\n"
- "and Telugu for Unicode engines."
- msgstr ""
- #: gnu/packages/tex.scm:2073
- msgid "Indonesian hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2074
- msgid ""
- "This package provides hyphenation patterns for\n"
- "Indonesian (Bahasa Indonesia) in ASCII encoding. They are probably also\n"
- "usable for Malay (Bahasa Melayu)."
- msgstr ""
- #: gnu/packages/tex.scm:2086
- msgid "Interlingua hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2087
- msgid ""
- "This package provides hyphenation patterns for Interlingua\n"
- "in ASCII encoding."
- msgstr ""
- #: gnu/packages/tex.scm:2098
- msgid "Irish hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2099
- msgid ""
- "This package provides hyphenation patterns for\n"
- "Irish (Gaeilge) in T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2111
- msgid "Italian hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2112
- msgid ""
- "This package provides hyphenation patterns for Italian in\n"
- "ASCII encoding. Compliant with the Recommendation UNI 6461 on hyphenation\n"
- "issued by the Italian Standards Institution (Ente Nazionale di Unificazione\n"
- "UNI)."
- msgstr ""
- #: gnu/packages/tex.scm:2125
- msgid "Kurmanji hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2126
- msgid ""
- "This package provides hyphenation patterns for\n"
- "Kurmanji (Northern Kurdish) as spoken in Turkey and by the Kurdish diaspora in\n"
- "Europe, in T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2141
- msgid "Liturgical Latin hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2142
- msgid ""
- "This package provides hyphenation patterns for Latin in\n"
- "T1/EC and UTF-8 encodings, mainly in modern spelling (u when u is needed and v\n"
- "when v is needed), medieval spelling with the ligatures @code{\\ae} and\n"
- "@code{\\oe} and the (uncial) lowercase 'v' written as a 'u' is also supported.\n"
- "Apparently there is no conflict between the patterns of modern Latin and those\n"
- "of medieval Latin. It also includes hyphenation patterns for the Classical\n"
- "Latin in T1/EC and UTF-8 encodings. Classical Latin hyphenation patterns are\n"
- "different from those of 'plain' Latin, the latter being more adapted to modern\n"
- "Latin. It also provides hyphenation patterns for the Liturgical Latin in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2162
- msgid "Latvian hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2163
- msgid ""
- "This package provides hyphenation patterns for Latvian in\n"
- "L7X and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2175
- msgid "Lithuanian hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2176
- msgid ""
- "This package provides hyphenation patterns for Lithuanian in\n"
- "L7X and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2190
- msgid "Macedonian hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2191
- msgid "This package provides hyphenation patterns for Macedonian."
- msgstr "이 꾸러미는 마케도니아인를 위해 하이픈 유형을 제공합니다."
- #: gnu/packages/tex.scm:2203
- msgid "Mongolian hyphenation patterns in Cyrillic script"
- msgstr ""
- #: gnu/packages/tex.scm:2204
- msgid ""
- "This package provides hyphenation patterns for Mongolian in\n"
- "T2A, LMC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2218
- msgid "Norwegian Bokmal and Nynorsk hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2219
- msgid ""
- "This package provides hyphenation patterns for Norwegian\n"
- "Bokmal and Nynorsk in T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2232
- msgid "Occitan hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2233
- msgid ""
- "This package provides hyphenation patterns for Occitan in\n"
- "T1/EC and UTF-8 encodings. They are supposed to be valid for all the Occitan\n"
- "variants spoken and written in the wide area called 'Occitanie' by the French.\n"
- "It ranges from the Val d'Aran within Catalunya, to the South Western Italian\n"
- "Alps encompassing the southern half of the French pentagon."
- msgstr ""
- #: gnu/packages/tex.scm:2247
- msgid "Panjabi hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2248
- msgid ""
- "This package provides hyphenation patterns for Panjabi in\n"
- "T1/EC encoding."
- msgstr ""
- #: gnu/packages/tex.scm:2260
- msgid "Piedmontese hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2261
- msgid ""
- "This package provides hyphenation patterns for Piedmontese\n"
- "in ASCII encoding. Compliant with 'Gramatica dla lengua piemonteisa' by\n"
- "Camillo Brero."
- msgstr ""
- #: gnu/packages/tex.scm:2273
- msgid "Polish hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2274
- msgid ""
- "This package provides hyphenation patterns for Polish in QX\n"
- "and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2286
- msgid "Portuguese hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2287
- msgid ""
- "This package provides hyphenation patterns for Portuguese in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2298
- msgid "Romanian hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2299
- msgid ""
- "This package provides hyphenation patterns for Romanian in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2311
- msgid "Romansh hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2312
- msgid ""
- "This package provides hyphenation patterns for Romansh in\n"
- "ASCII encodings. They are supposed to comply with the rules indicated by the\n"
- "Lia Rumantscha (Romansh language society)."
- msgstr ""
- #: gnu/packages/tex.scm:2324
- msgid "Russian hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2325
- msgid ""
- "This package provides hyphenation patterns for Russian in\n"
- "T2A and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2337
- msgid "Sanskrit hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2338
- msgid ""
- "This package provides hyphenation patterns for Sanskrit and\n"
- "Prakrit in longdesc transliteration, and in Devanagari, Bengali, Kannada,\n"
- "Malayalam longdesc and Telugu scripts for Unicode engines."
- msgstr ""
- #: gnu/packages/tex.scm:2354
- msgid "Serbian hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2355
- msgid ""
- "This package provides hyphenation patterns for Serbian in\n"
- "T1/EC, T2A and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2367
- msgid "Slovak hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2368
- msgid ""
- "This package provides hyphenation patterns for Slovak in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2379
- msgid "Slovenian hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2380
- msgid ""
- "This package provides hyphenation patterns for Slovenian in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2395
- msgid "Hyphenation patterns for Spanish"
- msgstr "스페인 사람을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:2396
- msgid ""
- "The package provides hyphenation patterns for Spanish in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2407
- msgid "Swedish hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2408
- msgid ""
- "This package provides hyphenation patterns for Swedish in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2419
- msgid "Thai hyphenation patterns"
- msgstr "태국 하이픈 유형"
- #: gnu/packages/tex.scm:2420
- msgid ""
- "This package provides hyphenation patterns for Thai in LTH\n"
- "and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2432
- msgid "Hyphenation patterns for Turkish"
- msgstr ""
- #: gnu/packages/tex.scm:2433
- msgid ""
- "The package provides hyphenation patterns for Turkish in\n"
- "T1/EC and UTF-8 encodings. The patterns for Turkish were first produced for\n"
- "the Ottoman Texts Project in 1987 and were suitable for both Modern Turkish\n"
- "and Ottoman Turkish in Latin script, however the required character set didn't\n"
- "fit into EC encoding, so support for Ottoman Turkish had to be dropped to keep\n"
- "compatibility with 8-bit engines."
- msgstr ""
- #: gnu/packages/tex.scm:2449
- msgid "Hyphenation patterns for Turkmen"
- msgstr ""
- #: gnu/packages/tex.scm:2450
- msgid ""
- "The package provides hyphenation patterns for Turkmen in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2461
- msgid "Ukrainian hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2462
- msgid ""
- "This package provides hyphenation patterns for Ukrainian in\n"
- "T2A and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2474
- msgid "Upper Sorbian hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2475
- msgid ""
- "This package provides hyphenation patterns for Upper Sorbian\n"
- "in T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2486
- msgid "Welsh hyphenation patterns"
- msgstr ""
- #: gnu/packages/tex.scm:2487
- msgid ""
- "This package provides hyphenation patterns for Welsh in\n"
- "T1/EC and UTF-8 encodings."
- msgstr ""
- #: gnu/packages/tex.scm:2607
- msgid "Hyphenation patterns expressed in UTF-8"
- msgstr ""
- #: gnu/packages/tex.scm:2608
- msgid ""
- "Modern native UTF-8 engines such as XeTeX and LuaTeX need\n"
- "hyphenation patterns in UTF-8 format, whereas older systems require\n"
- "hyphenation patterns in the 8-bit encoding of the font in use (such encodings\n"
- "are codified in the LaTeX scheme with names like OT1, T2A, TS1, OML, LY1,\n"
- "etc). The present package offers a collection of conversions of existing\n"
- "patterns to UTF-8 format, together with converters for use with 8-bit fonts in\n"
- "older systems. Since hyphenation patterns for Knuthian-style TeX systems are\n"
- "only read at iniTeX time, it is hoped that the UTF-8 patterns, with their\n"
- "converters, will completely supplant the older patterns."
- msgstr ""
- #: gnu/packages/tex.scm:2652
- msgid ""
- "The package provides experimental hyphenation patterns for\n"
- "the German language, covering both traditional and reformed orthography. The\n"
- "patterns can be used with packages Babel and hyphsubst from the Oberdiek\n"
- "bundle."
- msgstr ""
- #: gnu/packages/tex.scm:2672
- msgid "Hyphenation patterns for Ukrainian"
- msgstr "우크라이나인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:2673
- msgid ""
- "The package provides a range of hyphenation patterns for\n"
- "Ukrainian, depending on the encoding of the output font including the standard\n"
- "T2A."
- msgstr ""
- #: gnu/packages/tex.scm:2707
- msgid "Hyphenation patterns for Russian"
- msgstr "러시아인을 위한 하이픈 유형"
- #: gnu/packages/tex.scm:2708
- msgid ""
- "The package provides a collection of Russian hyphenation\n"
- "patterns supporting a number of Cyrillic font encodings, including T2,\n"
- "UCY (Omega Unicode Cyrillic), LCY, LWN (OT2), and koi8-r."
- msgstr ""
- #: gnu/packages/tex.scm:2724
- msgid "Enhanced input encoding handling"
- msgstr ""
- #: gnu/packages/tex.scm:2726
- msgid ""
- "This package deals with input encodings. It provides a wider range of input\n"
- "encodings using standard mappings, than does inputenc. It also covers nearly all\n"
- "slots. In this way, it serves as more up to date replacement for the inputenc\n"
- "package."
- msgstr ""
- #: gnu/packages/tex.scm:2786
- msgid "Files related to the path searching library for TeX"
- msgstr ""
- #: gnu/packages/tex.scm:2787
- msgid ""
- "Kpathsea is a library and utility programs which provide\n"
- "path searching facilities for TeX file types, including the self-locating\n"
- "feature required for movable installations, layered on top of a general search\n"
- "mechanism. This package provides supporting files."
- msgstr ""
- #: gnu/packages/tex.scm:2808
- msgid "Complete set of fonts for text and mathematics"
- msgstr ""
- #: gnu/packages/tex.scm:2810
- msgid ""
- "The family contains text fonts in roman, sans-serif and monospaced\n"
- "shapes, with true small caps and old-style numbers; the package offers full\n"
- "support of the textcomp package. The mathematics fonts include all the AMS\n"
- "fonts, in both normal and bold weights. Each of the font types is available\n"
- "in two main versions: default and light. Each version is available in four\n"
- "variants: default; oldstyle numbers; oldstyle numbers with old ligatures such\n"
- "as ct and st, and long-tailed capital Q; and veryoldstyle with long s. Other\n"
- "variants include small caps as default or large small caps, and for\n"
- "mathematics both upright and slanted shapes for Greek letters, as well as\n"
- "default and narrow versions of multiple integrals."
- msgstr ""
- #: gnu/packages/tex.scm:2831
- msgid "Configuration files for LaTeX-related formats"
- msgstr ""
- #: gnu/packages/tex.scm:2832
- msgid ""
- "The package provides configuration files for LaTeX-related\n"
- "formats."
- msgstr ""
- #: gnu/packages/tex.scm:3059
- msgid "Base sources of LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:3061
- msgid ""
- "This bundle comprises the source of LaTeX itself, together with several\n"
- "packages which are considered \"part of the kernel\". This bundle, together\n"
- "with the required packages, constitutes what every LaTeX distribution should\n"
- "contain."
- msgstr ""
- #: gnu/packages/tex.scm:3077
- msgid "Hooks at the very end of a document"
- msgstr ""
- #: gnu/packages/tex.scm:3079
- msgid ""
- "This LaTeX package provides two hooks for @code{\\end@{document@}}\n"
- "that are executed after the hook of @code{\\AtEndDocument}:\n"
- "@code{\\AfterLastShipout} can be used for code that is to be executed right\n"
- "after the last @code{\\clearpage} before the @file{.aux} file is closed.\n"
- "@code{\\AtVeryEndDocument} is used for code after closing and final reading\n"
- "of the @file{.aux} file."
- msgstr ""
- #: gnu/packages/tex.scm:3097
- msgid "Hooks for auxiliary files"
- msgstr ""
- #: gnu/packages/tex.scm:3099
- msgid ""
- "This package provides hooks for adding code at the beginning of\n"
- "@file{.aux} files."
- msgstr ""
- #: gnu/packages/tex.scm:3113
- msgid "Call @command{epstopdf} \"on the fly\""
- msgstr ""
- #: gnu/packages/tex.scm:3115
- msgid ""
- "The package adds support for EPS files in the @code{graphicx} package\n"
- "when running under pdfTeX. If an EPS graphic is detected, the package\n"
- "spawns a process to convert the EPS to PDF, using the script\n"
- "@command{epstopdf}."
- msgstr ""
- #: gnu/packages/tex.scm:3135
- msgid "Extended filecontents and filecontents* environments"
- msgstr ""
- #: gnu/packages/tex.scm:3137
- msgid ""
- "LaTeX2e's @code{filecontents} and @code{filecontents*} environments\n"
- "enable a LaTeX source file to generate external files as it runs through\n"
- "LaTeX. However, there are two limitations of these environments: they refuse\n"
- "to overwrite existing files, and they can only be used in the preamble of a\n"
- "document. The filecontents package removes these limitations, letting you\n"
- "overwrite existing files and letting you use @code{filecontents} /\n"
- "@code{filecontents*} anywhere."
- msgstr ""
- #: gnu/packages/tex.scm:3156
- msgid "Simple macros for EPS inclusion"
- msgstr ""
- #: gnu/packages/tex.scm:3158
- msgid ""
- "This package provides the original (and now obsolescent) graphics\n"
- "inclusion macros for use with dvips, still widely used by Plain TeX users (in\n"
- "particular). For LaTeX users, the package is nowadays (rather strongly)\n"
- "deprecated in favour of the more sophisticated standard LaTeX latex-graphics\n"
- "bundle of packages. (The latex-graphics bundle is also available to Plain TeX\n"
- "users, via its Plain TeX version.)"
- msgstr ""
- #: gnu/packages/tex.scm:3179 gnu/packages/tex.scm:3202
- msgid "Sophisticated verbatim text"
- msgstr ""
- #: gnu/packages/tex.scm:3181
- msgid ""
- "This package provides tools for the flexible handling of verbatim text\n"
- "including: verbatim commands in footnotes; a variety of verbatim environments\n"
- "with many parameters; ability to define new customized verbatim environments;\n"
- "save and restore verbatim text and environments; write and read files in\n"
- "verbatim mode; build @code{example} environments (showing both result and\n"
- "verbatim source)."
- msgstr ""
- #: gnu/packages/tex.scm:3204
- msgid ""
- "This package provides tools for the flexible handling of verbatim text\n"
- "including: verbatim commands in footnotes; a variety of verbatim environments\n"
- "with many parameters; ability to define new customized verbatim environments;\n"
- "save and restore verbatim text and environments; write and read files in\n"
- "verbatim mode; build \"example\" environments (showing both result and\n"
- "verbatim source)."
- msgstr ""
- #: gnu/packages/tex.scm:3224
- msgid "Color and graphics option files"
- msgstr ""
- #: gnu/packages/tex.scm:3226
- msgid ""
- "This bundle is a combined distribution consisting of @file{dvips.def},\n"
- "@file{pdftex.def}, @file{luatex.def}, @file{xetex.def}, @file{dvipdfmx.def},\n"
- "and @file{dvisvgm.def} driver option files for the LaTeX graphics and color\n"
- "packages."
- msgstr ""
- #: gnu/packages/tex.scm:3242
- msgid "Sample configuration files for LaTeX color and graphics"
- msgstr ""
- #: gnu/packages/tex.scm:3244
- msgid ""
- "This bundle includes @file{color.cfg} and @file{graphics.cfg} files that\n"
- "set default \"driver\" options for the color and graphics packages."
- msgstr ""
- #: gnu/packages/tex.scm:3259
- msgid "LICR macros and encoding definition files for Greek"
- msgstr ""
- #: gnu/packages/tex.scm:3261
- msgid ""
- "The package provides Greek LICR macro definitions and encoding definition files\n"
- "for Greek text font encodings for use with fontenc."
- msgstr ""
- #: gnu/packages/tex.scm:3281
- msgid "LaTeX standard graphics bundle"
- msgstr ""
- #: gnu/packages/tex.scm:3283
- msgid ""
- "This is a collection of LaTeX packages for producing color, including\n"
- "graphics (e.g. PostScript) files, and rotation and scaling of text in LaTeX\n"
- "documents. It comprises the packages color, graphics, graphicx, trig, epsfig,\n"
- "keyval, and lscape."
- msgstr ""
- #: gnu/packages/tex.scm:3299
- msgid "Color for hyperref and bookmark"
- msgstr ""
- #: gnu/packages/tex.scm:3301
- msgid ""
- "This package provides the code for the @code{color} option that is\n"
- "used by @code{hyperref} and @code{bookmark}."
- msgstr ""
- #: gnu/packages/tex.scm:3334
- msgid "Driver-independent color extensions for LaTeX and pdfLaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:3336
- msgid ""
- "The package starts from the basic facilities of the colorcolor package,\n"
- "and provides easy driver-independent access to several kinds of color tints,\n"
- "shades, tones, and mixes of arbitrary colors. It allows a user to select a\n"
- "document-wide target color model and offers complete tools for conversion\n"
- "between eight color models. Additionally, there is a command for alternating\n"
- "row colors plus repeated non-aligned material (like horizontal lines) in\n"
- "tables."
- msgstr ""
- #: gnu/packages/tex.scm:3408
- msgid "Support for parsing XML documents"
- msgstr ""
- #: gnu/packages/tex.scm:3409
- msgid ""
- "The package provides an implementation of a parser for\n"
- "documents matching the XML 1.0 and XML Namespace Recommendations. Element and\n"
- "attribute names, as well as character data, may use any characters allowed in\n"
- "XML, using UTF-8 or a suitable 8-bit encoding."
- msgstr ""
- #: gnu/packages/tex.scm:3462
- msgid "Extensive support for hypertext in LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:3464
- msgid ""
- "The @code{hyperref} package is used to handle cross-referencing commands\n"
- "in LaTeX to produce hypertext links in the document. The package provides\n"
- "backends for the @code{\\special} set defined for HyperTeX DVI processors; for\n"
- "embedded @code{pdfmark} commands for processing by Acrobat\n"
- "Distiller (@code{dvips} and Y&Y's @code{dvipsone}); for Y&Y's @code{dviwindo};\n"
- "for PDF control within pdfTeX and @code{dvipdfm}; for TeX4ht; and for VTeX's\n"
- "pdf and HTML backends. The package is distributed with the @code{backref} and\n"
- "@code{nameref} packages, which make use of the facilities of @code{hyperref}."
- msgstr ""
- #: gnu/packages/tex.scm:3502
- msgid "Bundle of packages submitted by Heiko Oberdiek"
- msgstr ""
- #: gnu/packages/tex.scm:3504
- msgid ""
- "The bundle comprises various LaTeX packages, providing among others:\n"
- "better accessibility support for PDF files; extensible chemists reaction\n"
- "arrows; record information about document class(es) used; and many more."
- msgstr ""
- #: gnu/packages/tex.scm:3525
- msgid "Checksum based rerun checks on auxiliary files"
- msgstr ""
- #: gnu/packages/tex.scm:3527
- msgid ""
- "This package provides additional rerun warnings if some auxiliary\n"
- "files have changed. It is based on MD5 checksum, provided by pdfTeX."
- msgstr ""
- #: gnu/packages/tex.scm:3559 gnu/packages/tex.scm:9695
- msgid "LaTeX standard tools bundle"
- msgstr ""
- #: gnu/packages/tex.scm:3561
- msgid ""
- "This package is a collection of (variously) simple tools provided as\n"
- "part of the LaTeX required tools distribution, comprising the following\n"
- "packages: afterpage, array, bm, calc, dcolumn, delarray, enumerate, fileerr,\n"
- "fontsmpl, ftnright, hhline, indentfirst, layout, longtable, multicol,\n"
- "rawfonts, showkeys, somedefs, tabularx, theorem, trace, varioref, verbatim,\n"
- "xr, and xspace."
- msgstr ""
- #: gnu/packages/tex.scm:3579
- msgid "Verbatim with URL-sensitive line breaks"
- msgstr ""
- #: gnu/packages/tex.scm:3580
- msgid ""
- "The command @code{\\url} is a form of verbatim command that\n"
- "allows linebreaks at certain characters or combinations of characters, accepts\n"
- "reconfiguration, and can usually be used in the argument to another command.\n"
- "The command is intended for email addresses, hypertext links,\n"
- "directories/paths, etc., which normally have no spaces, so by default the\n"
- "package ignores spaces in its argument. However, a package option allows\n"
- "spaces, which is useful for operating systems where spaces are a common part\n"
- "of file names."
- msgstr ""
- #: gnu/packages/tex.scm:3605
- msgid "Font maps originally from teTeX"
- msgstr ""
- #: gnu/packages/tex.scm:3606
- msgid ""
- "This package provides font maps that were originally part of\n"
- "the now obsolete teTeX distributions but are still used at the core of the TeX\n"
- "Live distribution."
- msgstr ""
- #: gnu/packages/tex.scm:3631
- msgid "LaTeX3 programmers’ interface"
- msgstr ""
- #: gnu/packages/tex.scm:3633
- msgid ""
- "The l3kernel bundle provides an implementation of the LaTeX3\n"
- "programmers’ interface, as a set of packages that run under LaTeX 2e. The\n"
- "interface provides the foundation on which the LaTeX3 kernel and other future\n"
- "code are built: it is an API for TeX programmers. The packages are set up so\n"
- "that the LaTeX3 conventions can be used with regular LaTeX 2e packages."
- msgstr ""
- #: gnu/packages/tex.scm:3660
- msgid "LaTeX3 backend drivers"
- msgstr ""
- #: gnu/packages/tex.scm:3662
- msgid ""
- "This package forms parts of expl3, and contains the code used to\n"
- "interface with backends (drivers) across the expl3 codebase. The functions\n"
- "here are defined differently depending on the engine in use. As such, these\n"
- "are distributed separately from l3kernel to allow this code to be updated on\n"
- "an independent schedule."
- msgstr ""
- #: gnu/packages/tex.scm:3724
- msgid "High-level LaTeX3 concepts"
- msgstr ""
- #: gnu/packages/tex.scm:3726
- msgid ""
- "This bundle holds prototype implementations of concepts for a LaTeX\n"
- "designer interface, to be used with the experimental LaTeX kernel as\n"
- "programming tools and kernel support. Packages provided in this release are:\n"
- "\n"
- "@enumerate\n"
- "@item l3keys2e, which makes the facilities of the kernel module l3keys\n"
- " available for use by LaTeX 2e packages;\n"
- "@item xfrac, which provides flexible splitlevel fractions;\n"
- "@item xparse, which provides a high-level interface for declaring document\n"
- " commands; and\n"
- "@item xtemplate, which provides a means of defining generic functions using a\n"
- " key-value syntax.\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/tex.scm:3751
- msgid "LaTeX3 backend drivers for dvips"
- msgstr ""
- #: gnu/packages/tex.scm:3753
- msgid ""
- "This package forms parts of expl3, and contains the code used to\n"
- "interface with backends (drivers) across the expl3 codebase. The functions\n"
- "here are defined for the dvips engine only."
- msgstr ""
- #: gnu/packages/tex.scm:3779
- msgid "Advanced font selection in XeLaTeX and LuaLaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:3781
- msgid ""
- "Fontspec is a package for XeLaTeX and LuaLaTeX. It provides an\n"
- "automatic and unified interface to feature-rich AAT and OpenType fonts through\n"
- "the NFSS in LaTeX running on XeTeX or LuaTeX engines. The package requires\n"
- "the l3kernel and xparse bundles from the LaTeX 3 development team."
- msgstr ""
- #: gnu/packages/tex.scm:3809
- msgid "Extended file name support for graphics (legacy package)"
- msgstr ""
- #: gnu/packages/tex.scm:3811
- msgid ""
- "The original grffile package extended the file name processing of the\n"
- "@code{graphics} package to support a larger range of file names. The base\n"
- "LaTeX code now supports multiple dots and spaces, and this package by default\n"
- "is a stub that just loads @code{graphicx}."
- msgstr ""
- #: gnu/packages/tex.scm:3850
- msgid "Converting a string between different encodings"
- msgstr ""
- #: gnu/packages/tex.scm:3852
- msgid ""
- "This package provides @code{\\StringEncodingConvert} for converting a\n"
- "string between different encodings. Both LaTeX and plain-TeX are supported."
- msgstr ""
- #: gnu/packages/tex.scm:3893
- msgid "Testing and building system for LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:3895
- msgid ""
- "The l3build module is designed to support the development of\n"
- "high-quality LaTeX code by providing: a unit testing system, automated\n"
- "typesetting of code sources, and a reliable packaging system for CTAN\n"
- "releases. The bundle consists of a Lua script to run the tasks and a\n"
- "@code{.tex} file which provides the testing environment."
- msgstr ""
- #: gnu/packages/tex.scm:3916
- msgid "Additional Lua functions for LuaTeX macro programmers"
- msgstr ""
- #: gnu/packages/tex.scm:3918
- msgid ""
- "Lualibs is a collection of Lua modules useful for general programming.\n"
- "The bundle is based on Lua modules shipped with ConTeXt, and made available in\n"
- "this bundle for use independent of ConTeXt."
- msgstr ""
- #: gnu/packages/tex.scm:3935
- msgid "Process application arguments the same way as getopt_long"
- msgstr ""
- #: gnu/packages/tex.scm:3937
- msgid ""
- "This package provides a Lua module for processing application arguments\n"
- "in the same way as BSD/GNU @code{getopt_long(3)} functions do."
- msgstr ""
- #: gnu/packages/tex.scm:3962
- msgid "OpenType font loader for LuaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:3964
- msgid ""
- "Luaotfload is an adaptation of the ConTeXt font loading system for the\n"
- "Plain and LaTeX formats. It allows OpenType fonts to be loaded with font\n"
- "features accessible using an extended font request syntax while providing\n"
- "compatibilitywith XeTeX. By indexing metadata in a database it facilitates\n"
- "loading fonts by their proper names instead of file names."
- msgstr ""
- #: gnu/packages/tex.scm:4004
- msgid "AMS mathematical facilities for LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:4006
- msgid ""
- "This is the principal package in the AMS-LaTeX distribution. It adapts\n"
- "for use in LaTeX most of the mathematical features found in AMS-TeX; it is\n"
- "highly recommended as an adjunct to serious mathematical typesetting in LaTeX.\n"
- "When amsmath is loaded, AMS-LaTeX packages @code{amsbsyamsbsy} (for bold\n"
- "symbols), @code{amsopnamsopn} (for operator names) and\n"
- "@code{amstextamstext} (for text embedded in mathematics) are also loaded.\n"
- "This package is part of the LaTeX required distribution; however, several\n"
- "contributed packages add still further to its appeal; examples are\n"
- "@code{empheqempheq}, which provides functions for decorating and highlighting\n"
- "mathematics, and @code{ntheoremntheorem}, for specifying theorem (and similar)\n"
- "definitions."
- msgstr ""
- #: gnu/packages/tex.scm:4053
- msgid "Commands to produce dots in math that respect font size"
- msgstr ""
- #: gnu/packages/tex.scm:4055
- msgid ""
- "Mathdots redefines @code{\\ddots} and @code{\\vdots}, and defines\n"
- "@code{\\iddots}. The dots produced by @code{\\iddots} slant in the opposite\n"
- "direction to @code{\\ddots}. All the commands are designed to change size\n"
- "appropriately in scripts, as well as in response to LaTeX size changing\n"
- "commands. The commands may also be used in plain TeX."
- msgstr ""
- #: gnu/packages/tex.scm:4081
- msgid "AMS document classes for LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:4083
- msgid ""
- "This bundle contains three AMS classes: @code{amsartamsart} (for writing\n"
- "articles for the AMS), @code{amsbookamsbook} (for books) and\n"
- "@code{amsprocamsproc} (for proceedings), together with some supporting\n"
- "material. The material is made available as part of the AMS-LaTeX\n"
- "distribution."
- msgstr ""
- #: gnu/packages/tex.scm:4141
- msgid "Multilingual support for Plain TeX or LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:4143
- msgid ""
- "The package manages culturally-determined typographical (and other)\n"
- "rules, and hyphenation patterns for a wide range of languages. A document may\n"
- "select a single language to be supported, or it may select several, in which\n"
- "case the document may switch from one language to another in a variety of\n"
- "ways. Babel uses contributed configuration files that provide the detail of\n"
- "what has to be done for each language. Users of XeTeX are advised to use the\n"
- "polyglossia package rather than Babel."
- msgstr ""
- #: gnu/packages/tex.scm:4179
- msgid "Czech/Slovak-tuned Computer Modern fonts"
- msgstr ""
- #: gnu/packages/tex.scm:4180
- msgid ""
- "This package provides Czech/Slovak-tuned Computer Modern\n"
- "fonts in the Metafont format; Type 1 format versions (csfonts-t1) are also\n"
- "available."
- msgstr ""
- #: gnu/packages/tex.scm:4195
- msgid "Plain TeX multilanguage support"
- msgstr ""
- #: gnu/packages/tex.scm:4196
- msgid ""
- "CSplain is a small extension of basic Plain TeX macros from\n"
- "which the formats @code{csplain} and @code{pdfcsplain} can be generated. It\n"
- "supports: hyphenation of words for 50+ languages, simple and powerful font\n"
- "loading system (various sizes of fonts), TeX, pdfTeX, XeTeX and LuaTeX\n"
- "engines, math fonts simply loaded with full amstex-like features, three\n"
- "internal encodings (IL2 for Czech/Slovak languages, T1 for many languages with\n"
- "latin alphabet and Unicode in new TeX engines), natural UTF-8 input in pdfTeX\n"
- "using encTeX without any active characters, Czech and Slovak special\n"
- "typesetting features. An important part of the package is OPmac, which\n"
- "implements most of LaTeX's features (sectioning, font selection, color, hyper\n"
- "reference and URLs, bibliography, index, table of contents, tables, etc.) by\n"
- "Plain TeX macros. The OPmac macros can generate a bibliography without any\n"
- "external program."
- msgstr ""
- #: gnu/packages/tex.scm:4227
- msgid "Babel support for English"
- msgstr ""
- #: gnu/packages/tex.scm:4229
- msgid ""
- "This package provides the language definition file for support of\n"
- "English in @code{babel}. Care is taken to select British hyphenation patterns\n"
- "for British English and Australian text, and default (\"american\") patterns\n"
- "for Canadian and USA text."
- msgstr ""
- #: gnu/packages/tex.scm:4267
- msgid "Babel contributed support for French"
- msgstr ""
- #: gnu/packages/tex.scm:4269
- msgid ""
- "The package, formerly known as frenchb, establishes French conventions\n"
- "in a document (or a subset of the conventions, if French is not the main\n"
- "language of the document)."
- msgstr ""
- #: gnu/packages/tex.scm:4290
- msgid "Babel support for German"
- msgstr ""
- #: gnu/packages/tex.scm:4292
- msgid ""
- "This package provides the language definition file for support of German\n"
- "in @code{babel}. It provides all the necessary macros, definitions and\n"
- "settings to typeset German documents. The bundle includes support for the\n"
- "traditional and reformed German orthography as well as for the Austrian and\n"
- "Swiss varieties of German."
- msgstr ""
- #: gnu/packages/tex.scm:4318
- msgid "Babel support for Swedish"
- msgstr ""
- #: gnu/packages/tex.scm:4319
- msgid ""
- "This package provides the language definition file for\n"
- "support of Swedish in @code{babel}. It provides all the necessary macros,\n"
- "definitions and settings to typeset Swedish documents."
- msgstr ""
- #: gnu/packages/tex.scm:4339
- msgid "Support for Cyrillic fonts in LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:4341
- msgid ""
- "This bundle of macros files provides macro support (including font\n"
- "encoding macros) for the use of Cyrillic characters in fonts encoded under the\n"
- "T2* and X2 encodings. These encodings cover (between them) pretty much every\n"
- "language that is written in a Cyrillic alphabet."
- msgstr ""
- #: gnu/packages/tex.scm:4465
- msgid "Font support for common PostScript fonts"
- msgstr ""
- #: gnu/packages/tex.scm:4467
- msgid ""
- "The PSNFSS collection includes a set of files that provide a complete\n"
- "working setup of the LaTeX font selection scheme (NFSS2) for use with common\n"
- "PostScript fonts. The base set of text fonts covered by PSNFSS includes the\n"
- "AvantGarde, Bookman, Courier, Helvetica, New Century Schoolbook, Palatino,\n"
- "Symbol, Times Roman and Zapf Dingbats fonts. In addition, the fonts Bitstream\n"
- "Charter and Adobe Utopia are covered. Separate packages are provided to load\n"
- "each font for use as the main text font. The package @code{helvet} allows\n"
- "Helvetica to be loaded with its size scaled to something more appropriate for\n"
- "use as a Sans-Serif font to match Times, while @code{pifont} provides the\n"
- "means to select single glyphs from symbol fonts. The bundle as a whole is\n"
- "part of the LaTeX required set of packages."
- msgstr ""
- #: gnu/packages/tex.scm:4517
- msgid "TeX Live base packages"
- msgstr ""
- #: gnu/packages/tex.scm:4518 gnu/packages/tex.scm:4622
- msgid ""
- "This is a very limited subset of the TeX Live distribution.\n"
- "It includes little more than the required set of LaTeX packages."
- msgstr ""
- #: gnu/packages/tex.scm:4600
- msgid "TeX Live fonts map configuration"
- msgstr ""
- #: gnu/packages/tex.scm:4601
- msgid ""
- "This package contains the fonts map configuration file\n"
- "generated for the base TeX Live packages as well as, optionally, user-provided\n"
- "ones."
- msgstr ""
- #: gnu/packages/tex.scm:4640
- msgid "Fonts and macros for IPA phonetics characters"
- msgstr ""
- #: gnu/packages/tex.scm:4641
- msgid ""
- "These fonts are considered the \"ultimate answer\" to IPA\n"
- "typesetting. The encoding of these 8-bit fonts has been registered as LaTeX\n"
- "standard encoding T3, and the set of addendum symbols as encoding\n"
- "TS3. \"Times-like\" Adobe Type 1 versions are provided for both the T3 and the\n"
- "TS3 fonts."
- msgstr ""
- #: gnu/packages/tex.scm:4662
- msgid "LaTeX-based replacement for BibTeX"
- msgstr ""
- #: gnu/packages/tex.scm:4664
- msgid ""
- "Amsrefs is a LaTeX package for bibliographies that provides an archival\n"
- "data format similar to the format of BibTeX database files, but adapted to\n"
- "make direct processing by LaTeX easier. The package can be used either in\n"
- "conjunction with BibTeX or as a replacement for BibTeX."
- msgstr ""
- #: gnu/packages/tex.scm:4691
- msgid "Footnotes for critical editions"
- msgstr ""
- #: gnu/packages/tex.scm:4693
- msgid ""
- "This package aims to provide a one-stop solution to requirements for\n"
- "footnotes. It offers: Multiple footnote apparatus superior to that of\n"
- "@code{manyfoot}. Footnotes can be formatted in separate paragraphs, or be run\n"
- "into a single paragraph (this choice may be selected per footnote series);\n"
- "Things you might have expected (such as @code{\\verb}-like material in\n"
- "footnotes, and color selections over page breaks) now work. Note that the\n"
- "majority of the bigfoot package's interface is identical to that of\n"
- "@code{manyfoot}; users should seek information from that package's\n"
- "documentation. The bigfoot bundle also provides the @code{perpage} and\n"
- "@code{suffix} packages."
- msgstr ""
- #: gnu/packages/tex.scm:4719
- msgid "Producing 'blind' text for testing"
- msgstr ""
- #: gnu/packages/tex.scm:4721
- msgid ""
- "The package provides the commands @code{\\blindtext} and\n"
- "@code{\\Blindtext} for creating \"blind\" text useful in testing new classes\n"
- "and packages, and @code{\\blinddocument}, @code{\\Blinddocument} for creating\n"
- "an entire random document with sections, lists, mathematics, etc. The package\n"
- "supports three languages, @code{english}, @code{(n)german} and @code{latin};\n"
- "the @code{latin} option provides a short \"lorem ipsum\" (for a fuller \"lorem\n"
- "ipsum\" text, see the @code{lipsum} package)."
- msgstr ""
- #: gnu/packages/tex.scm:4758
- msgid "German letter DIN style"
- msgstr ""
- #: gnu/packages/tex.scm:4760
- msgid ""
- "This package implements a document layout for writing letters according\n"
- "to the rules of DIN (Deutsches Institut für Normung, German standardisation\n"
- "institute). A style file for LaTeX 2.09 (with limited support of the\n"
- "features) is part of the package. Since the letter layout is based on a\n"
- "German standard, the user guide is written in German, but most macros have\n"
- "English names from which the user can recognize what they are used for. In\n"
- "addition there are example files showing how letters may be created with the\n"
- "package."
- msgstr ""
- #: gnu/packages/tex.scm:4784
- msgid "Put a grey textual watermark on document pages"
- msgstr ""
- #: gnu/packages/tex.scm:4786
- msgid ""
- "This package provides a means to add a textual, light grey watermark on\n"
- "every page or on the first page of a document. Typical usage may consist in\n"
- "writing words such as DRAFT or CONFIDENTIAL across document pages. The\n"
- "package performs a similar function to that of @code{draftcopy}, but its\n"
- "implementation is output device independent, and made very simple by relying\n"
- "on everypage."
- msgstr ""
- #: gnu/packages/tex.scm:4808
- msgid "New interface for environments in LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:4810
- msgid ""
- "This package provides the @code{\\collect@@body} command (as in\n"
- "@code{amsmath}), as well as a @code{\\long} version @code{\\Collect@@Body},\n"
- "for collecting the body text of an environment. These commands are used to\n"
- "define a new author interface to creating new environments."
- msgstr ""
- #: gnu/packages/tex.scm:4830
- msgid "Create equal-widthed parboxes"
- msgstr ""
- #: gnu/packages/tex.scm:4832
- msgid ""
- "LaTeX users sometimes need to ensure that two or more blocks of text\n"
- "occupy the same amount of horizontal space on the page. To that end, the\n"
- "@code{eqparbox} package defines a new command, @code{\\eqparbox}, which works\n"
- "just like @code{\\parbox}, except that instead of specifying a width, one\n"
- "specifies a tag. All @code{eqparbox}es with the same tag---regardless of\n"
- "where they are in the document---will stretch to fit the widest\n"
- "@code{eqparbox} with that tag. This simple, equal-width mechanism can be used\n"
- "for a variety of alignment purposes, as is evidenced by the examples in\n"
- "@code{eqparbox}'s documentation. Various derivatives of @code{\\eqparbox} are\n"
- "also provided."
- msgstr ""
- #: gnu/packages/tex.scm:4855
- msgid "Completely customisable TOCs"
- msgstr ""
- #: gnu/packages/tex.scm:4857
- msgid ""
- "This package gives the user complete control of how the entries of\n"
- "the table of contents should be constituted from the name, number, and page\n"
- "number of each sectioning unit. The layout is controlled by the definition\n"
- "of ‘line styles’ for each sectioning level used in the document.\n"
- "\n"
- "The package provides its own custom line styles (which may be used as\n"
- "examples), and continues to support the standard formatting inherited from\n"
- "the LaTeX document classes, but the package can also allow the user to\n"
- "delegate the details to packages dealing with list making environments (such\n"
- "as enumitem). The package’s default global style typesets tables of contents\n"
- "in a multi-column format, with either a standard heading, or a ruled title\n"
- "(optionally with a frame around the table).\n"
- "\n"
- "The @code{\\tableofcontents} command may be used arbitrarily many times in\n"
- "the same document, while @code{\\localtableofcontents} provides a ‘local’\n"
- "table of contents."
- msgstr ""
- #: gnu/packages/tex.scm:4897
- msgid "Expanded description environments"
- msgstr ""
- #: gnu/packages/tex.scm:4899
- msgid ""
- "The package provides additional features for the LaTeX\n"
- "@code{description} environment, including adjustable left margin. The package\n"
- "also allows the user to \"break\" a list (for example, to interpose a comment)\n"
- "without affecting the structure of the list (this works for @code{itemize} and\n"
- "@code{enumerate} lists, and numbered lists remain in sequence)."
- msgstr ""
- #: gnu/packages/tex.scm:4917
- msgid "Provide file modification times, and compare them"
- msgstr ""
- #: gnu/packages/tex.scm:4919
- msgid ""
- "This package provides macros to read and compare the modification dates\n"
- "of files. The files may be @code{.tex} files, images or other files (as long\n"
- "as they can be found by LaTeX). It uses the @code{\\pdffilemoddate} primitive\n"
- "of pdfLaTeX to find the file modification date as PDF date string, parses the\n"
- "string and returns the value to the user. The package will also work for DVI\n"
- "output with recent versions of the LaTeX compiler which uses pdfLaTeX in DVI\n"
- "mode. The functionality is provided by purely expandable macros or by faster\n"
- "but non-expandable ones."
- msgstr ""
- #: gnu/packages/tex.scm:4940
- msgid "Typeset hanging paragraphs"
- msgstr ""
- #: gnu/packages/tex.scm:4942
- msgid ""
- "The @code{hanging} package facilitates the typesetting of hanging\n"
- "paragraphs. The package also enables typesetting with hanging punctuation,\n"
- "by making punctuation characters active."
- msgstr ""
- #: gnu/packages/tex.scm:4963
- msgid "Fira fonts with LaTeX support"
- msgstr ""
- #: gnu/packages/tex.scm:4965
- msgid ""
- "This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for\n"
- "the Fira Sans family of fonts designed by Erik Spiekermann and Ralph du\n"
- "Carrois of Carrois Type Design. Fira Sans is available in eleven weights with\n"
- "corresponding italics: light, regular, medium, bold, ..."
- msgstr ""
- #: gnu/packages/tex.scm:4987
- msgid "Conditionals to test which platform is being used"
- msgstr ""
- #: gnu/packages/tex.scm:4989
- msgid ""
- "This package uses the (La)TeX extension @code{-shell-escape} to\n"
- "establish whether the document is being processed on a Windows or on a\n"
- "Unix-like system, or on Cygwin (Unix environment over a Windows system).\n"
- "Booleans provided are: @code{\\ifwindows}, @code{\\iflinux}, @code{\\ifmacosx}\n"
- "and @code{\\ifcygwin}. The package also preserves the output of @code{uname}\n"
- "on a Unix-like system, which may be used to distinguish between various\n"
- "classes of systems."
- msgstr ""
- #: gnu/packages/tex.scm:5012
- msgid "Flexible bibliography support"
- msgstr ""
- #: gnu/packages/tex.scm:5014
- msgid ""
- "This bundle provides a package that implements both author-year and\n"
- "numbered references, as well as much detailed of support for other\n"
- "bibliography use. Also provided are versions of the standard BibTeX styles\n"
- "that are compatible with @code{natbib}: @code{plainnat}, @code{unsrtnat},\n"
- "@code{abbrnat}. The bibliography styles produced by @code{custom-bib} are\n"
- "designed from the start to be compatible with @code{natbib}."
- msgstr ""
- #: gnu/packages/tex.scm:5032
- msgid "Define new floating environments"
- msgstr ""
- #: gnu/packages/tex.scm:5034
- msgid ""
- "This package offers the command @code{\\DeclareFloatingEnvironment},\n"
- "which the user may use to define new floating environments which behave like\n"
- "the LaTeX standard foating environments @code{figure} and @code{table}."
- msgstr ""
- #: gnu/packages/tex.scm:5048
- msgid "Definitions of the meaning of Unicode characters"
- msgstr ""
- #: gnu/packages/tex.scm:5050
- msgid ""
- "This package provides a friendly interface for defining the meaning of\n"
- "Unicode characters. The document should be processed by (pdf)LaTeX with the\n"
- "Unicode option of @code{inputenc} or @code{inputenx}, or by XeLaTeX/LuaLaTeX."
- msgstr ""
- #: gnu/packages/tex.scm:5068
- msgid "LuaTeX support for pdfTeX utility functions"
- msgstr ""
- #: gnu/packages/tex.scm:5070
- msgid ""
- "This package makes a number of utility functions from pdfTeX\n"
- "available for luaTeX by reimplementing them using Lua."
- msgstr ""
- #: gnu/packages/tex.scm:5088
- msgid "Replace strings in encapsulated PostScript figures"
- msgstr ""
- #: gnu/packages/tex.scm:5090
- msgid ""
- "This package allows LaTeX constructions (equations, picture\n"
- "environments, etc.) to be precisely superimposed over Encapsulated PostScript\n"
- "figures, using your own favorite drawing tool to create an EPS figure and\n"
- "placing simple text \"tags\" where each replacement is to be placed, with\n"
- "PSfrag automatically removing these tags from the figure and replacing them\n"
- "with a user specified LaTeX construction, properly aligned, scaled, and/or\n"
- "rotated."
- msgstr ""
- #: gnu/packages/tex.scm:5120
- msgid "Process PostScript graphics within pdfLaTeX documents"
- msgstr ""
- #: gnu/packages/tex.scm:5122
- msgid ""
- "This is a package for processing PostScript graphics with @code{psfrag}\n"
- "labels within pdfLaTeX documents. Every graphic is compiled individually,\n"
- "drastically speeding up compilation time when only a single figure needs\n"
- "re-processing."
- msgstr ""
- #: gnu/packages/tex.scm:5140
- msgid "Counter operations with label references"
- msgstr ""
- #: gnu/packages/tex.scm:5142
- msgid ""
- "This package provides the @code{\\setcounterref} and\n"
- "@code{\\addtocounterref} commands which use the section (or other) number\n"
- "from the reference as the value to put into the counter. It also provides\n"
- "@code{\\setcounterpageref} and @code{\\addtocounterpageref} that do the\n"
- "corresponding thing with the page reference of the label."
- msgstr ""
- #: gnu/packages/tex.scm:5159
- msgid "Make overhead slides"
- msgstr ""
- #: gnu/packages/tex.scm:5162
- msgid ""
- "This package provides a class that produces overhead\n"
- "slides (transparencies), with many facilities. Seminar is not nowadays\n"
- "reckoned a good basis for a presentation — users are advised to use more\n"
- "recent classes such as powerdot or beamer, both of which are tuned to\n"
- "21st-century presentation styles."
- msgstr ""
- #: gnu/packages/tex.scm:5181
- msgid "Split long sequences of characters in a neutral way"
- msgstr ""
- #: gnu/packages/tex.scm:5183
- msgid ""
- "@code{seqsplit} provides a command @code{\\seqsplit}, which makes its\n"
- "argument splittable anywhere, and then leaves the TeX paragraph-maker to do the\n"
- "splitting. The package is suitable for situations when one needs to type long\n"
- "sequences of letters or of numbers in which there is no obvious break points to\n"
- "be found, such as in base-sequences in genes or calculations of transcendental\n"
- "numbers. While the package may obviously be used to typeset DNA sequences, the\n"
- "user may consider the @code{dnaseq} as a rather more powerful alternative."
- msgstr ""
- #: gnu/packages/tex.scm:5202
- msgid "Customised stacking of objects"
- msgstr ""
- #: gnu/packages/tex.scm:5204
- msgid ""
- "The package provides a versatile way to stack objects vertically in a\n"
- "variety of customizable ways. A number of useful macros are provided, all\n"
- "of which make use of the @code{stackengine} core."
- msgstr ""
- #: gnu/packages/tex.scm:5218
- msgid "Control table of contents"
- msgstr ""
- #: gnu/packages/tex.scm:5220
- msgid ""
- "This package provides control over the typography of the\n"
- "@dfn{Table of Contents}, @dfn{List of Figures} and @dfn{List of Tables},\n"
- "and the ability to create new ‘List of ...’. The ToC @code{\\parskip} may\n"
- "be changed."
- msgstr ""
- #: gnu/packages/tex.scm:5252
- msgid "Trim spaces around an argument or within a macro"
- msgstr ""
- #: gnu/packages/tex.scm:5254
- msgid ""
- "This very short package allows you to expandably remove spaces around a\n"
- "token list (commands are provided to remove spaces before, spaces after, or\n"
- "both); or to remove surrounding spaces within a macro definition, or to define\n"
- "space-stripped macros."
- msgstr ""
- #: gnu/packages/tex.scm:5269
- msgid "Copperplate calligraphic letters in LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:5270
- msgid "This package provides a math interface to the Rsfs fonts."
- msgstr "이 꾸러미는 Rsfs 글꼴에 math 연결장치를 제공합니다."
- #: gnu/packages/tex.scm:5305
- msgid "Captions on more than floats"
- msgstr ""
- #: gnu/packages/tex.scm:5307
- msgid ""
- "This package defines a command @code{\\captionof} for putting a caption\n"
- "to something that's not a float."
- msgstr ""
- #: gnu/packages/tex.scm:5323
- msgid "David Carlisle's small packages"
- msgstr ""
- #: gnu/packages/tex.scm:5325
- msgid ""
- "Many of David Carlisle's more substantial packages stand on their own,\n"
- "or as part of the LaTeX latex-tools set; this set contains: making dotless\n"
- "@emph{j} characters for fonts that don't have them; a method for combining the\n"
- "capabilities of longtable and tabularx; an environment for including plain TeX\n"
- "in LaTeX documents; a jiffy to create slashed characters for physicists."
- msgstr ""
- #: gnu/packages/tex.scm:5347
- msgid "Catch an external file into a macro"
- msgstr ""
- #: gnu/packages/tex.scm:5349
- msgid "Catchfile catches the contents of a file and puts it in a macro."
- msgstr ""
- #: gnu/packages/tex.scm:5362
- msgid "Create correct hyperlinks for DOI numbers"
- msgstr ""
- #: gnu/packages/tex.scm:5364
- msgid ""
- "You can hyperlink DOI numbers to doi.org. However, some publishers have\n"
- "elected to use nasty characters in their DOI numbering scheme (@code{<},\n"
- "@code{>}, @code{_} and @code{;} have all been spotted). This will either\n"
- "upset LaTeX, or your PDF reader. This package contains a single user-level\n"
- "command @code{\\doi{}}, which takes a DOI number, and creates a correct\n"
- "hyperlink to the target of the DOI."
- msgstr ""
- #: gnu/packages/tex.scm:5385
- msgid "e-TeX tools for LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:5387
- msgid ""
- "This package is a toolbox of programming facilities geared primarily\n"
- "towards LaTeX class and package authors. It provides LaTeX frontends to some\n"
- "of the new primitives provided by e-TeX as well as some generic tools which\n"
- "are not strictly related to e-TeX but match the profile of this package. The\n"
- "package provides functions that seem to offer alternative ways of implementing\n"
- "some LaTeX kernel commands; nevertheless, the package will not modify any part\n"
- "of the LaTeX kernel."
- msgstr ""
- #: gnu/packages/tex.scm:5425
- msgid "Seven predefined chapter heading styles"
- msgstr ""
- #: gnu/packages/tex.scm:5427
- msgid ""
- "This package provides seven predefined chapter heading styles. Each\n"
- "style can be modified using a set of simple commands. Optionally one can\n"
- "modify the formatting routines in order to create additional chapter\n"
- "headings."
- msgstr ""
- #: gnu/packages/tex.scm:5460
- msgid "Framed or shaded regions that can break across pages"
- msgstr ""
- #: gnu/packages/tex.scm:5462
- msgid ""
- "The package creates three environments: @code{framed}, which puts an\n"
- "ordinary frame box around the region, @code{shaded}, which shades the region,\n"
- "and @code{leftbar}, which places a line at the left side. The environments\n"
- "allow a break at their start (the @code{\\FrameCommand} enables creation of a\n"
- "title that is “attached” to the environment); breaks are also allowed in the\n"
- "course of the framed/shaded matter. There is also a command\n"
- "@code{\\MakeFramed} to make your own framed-style environments."
- msgstr ""
- #: gnu/packages/tex.scm:5494
- msgid "Letter document class"
- msgstr ""
- #: gnu/packages/tex.scm:5496
- msgid ""
- "This package is designed for formatting formless letters in German; it\n"
- "can also be used for English (by those who can read the documentation). There\n"
- "are LaTeX 2.09 @code{documentstyle} and LaTeX 2e class files for both an\n"
- "\"old\" and a \"new\" version of g-brief."
- msgstr ""
- #: gnu/packages/tex.scm:5516
- msgid "Typeset Galois connections"
- msgstr ""
- #: gnu/packages/tex.scm:5518
- msgid ""
- "The package deals with connections in two-dimensional style, optionally\n"
- "in colour."
- msgstr ""
- #: gnu/packages/tex.scm:5536
- msgid "Citations in a reader-friendly style"
- msgstr ""
- #: gnu/packages/tex.scm:5538
- msgid ""
- "The package allows citations in the German style, which is considered by\n"
- "many to be particularly reader-friendly. The citation provides a small amount\n"
- "of bibliographic information in a footnote on the page where each citation is\n"
- "made. It combines a desire to eliminate unnecessary page-turning with the\n"
- "look-up efficiency afforded by numeric citations. The package makes use of\n"
- "BibLaTeX, and is considered experimental."
- msgstr ""
- #: gnu/packages/tex.scm:5563
- msgid "Flexible and complete interface to document dimensions"
- msgstr ""
- #: gnu/packages/tex.scm:5565
- msgid ""
- "This package provides an easy and flexible user interface to customize\n"
- "page layout, implementing auto-centering and auto-balancing mechanisms so that\n"
- "the users have only to give the least description for the page layout. The\n"
- "package knows about all the standard paper sizes, so that the user need not\n"
- "know what the nominal \"real\" dimensions of the paper are, just its standard\n"
- "name (such as a4, letter, etc.). An important feature is the package's\n"
- "ability to communicate the paper size it's set up to the output."
- msgstr ""
- #: gnu/packages/tex.scm:5588
- msgid "Miscellaneous tools by Mark Wooding"
- msgstr ""
- #: gnu/packages/tex.scm:5590
- msgid ""
- "This collection of tools includes: @code{atsupport} for short commands\n"
- "starting with @code{@@}, macros to sanitize the OT1 encoding of the\n"
- "@code{cmtt} fonts; a @code{doafter} command; improved @code{footnote} support;\n"
- "@code{mathenv} for various alignment in maths; list handling; @code{mdwmath}\n"
- "which adds some minor changes to LaTeX maths; a rewrite of LaTeX's tabular and\n"
- "array environments; verbatim handling; and syntax diagrams."
- msgstr ""
- #: gnu/packages/tex.scm:5635
- msgid "TeX macro to define or redefine a command"
- msgstr ""
- #: gnu/packages/tex.scm:5636
- msgid ""
- "The package provides a @code{\\makecommand} command, which\n"
- "is like @code{\\newcommand} or @code{\\renewcommand} except it\n"
- "always (re)defines a command. There is also @code{\\makeenvironment} and\n"
- "@code{\\provideenvironment} for environments."
- msgstr ""
- #: gnu/packages/tex.scm:5652
- msgid "Patch \\marginpar to avoid overfull margins"
- msgstr ""
- #: gnu/packages/tex.scm:5654
- msgid ""
- "Authors using LaTeX to typeset books with significant margin material\n"
- "often run into the problem of long notes running off the bottom of the page.\n"
- "This package implements a solution to make marginpars ``just work'' by keeping\n"
- "a list of floating inserts and arranging them intelligently in the output\n"
- "routine."
- msgstr ""
- #: gnu/packages/tex.scm:5735
- msgid "Extended TeX logo macros"
- msgstr ""
- #: gnu/packages/tex.scm:5736
- msgid ""
- "This package exposes spacing parameters for various TeX\n"
- "logos to the end user, to optimise the logos for different fonts. It is\n"
- "written especially for XeLaTeX users."
- msgstr ""
- #: gnu/packages/tex.scm:5779
- msgid "Enumerate and itemize within paragraphs"
- msgstr ""
- #: gnu/packages/tex.scm:5780
- msgid ""
- "The @code{paralist} package provides enumerate and itemize\n"
- "environments that can be used within paragraphs to format the items either as\n"
- "running text or as separate paragraphs with a preceding number or symbol. It\n"
- "also provides compacted versions of enumerate and itemize."
- msgstr ""
- #: gnu/packages/tex.scm:5884
- msgid "Alternative to Babel for XeLaTeX and LuaLaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:5885
- msgid ""
- "This package provides a complete Babel replacement for users\n"
- "of LuaLaTeX and XeLaTeX. It includes support for over 70 different languages,\n"
- "some of which in different regional or national varieties, or using a\n"
- "different writing system. It enables:\n"
- "@itemize\n"
- "@item\n"
- "Loading the appropriate hyphenation patterns.\n"
- "@item\n"
- "Setting the script and language tags of the current font (if possible and\n"
- "available), using the package fontspec.\n"
- "@item\n"
- "Switching to a font assigned by the user to a particular script or language.\n"
- "@item\n"
- "Adjusting some typographical conventions in function of the current language\n"
- "(such as afterindent, frenchindent, spaces before or after punctuation marks,\n"
- "etc.)\n"
- "@item\n"
- "Redefining the document strings (like @samp{chapter}, @samp{figure},\n"
- "@samp{bibliography}). Adapting the formatting of dates (for non-gregorian\n"
- "calendars via external packages bundled with polyglossia: currently the\n"
- "Hebrew, Islamic and Farsi calendars are supported).\n"
- "@item\n"
- "For languages that have their own numeration system, modifying the formatting\n"
- "of numbers appropriately.\n"
- "@item\n"
- "Ensuring the proper directionality if the document contains languages\n"
- "written from right to left (via the packages bidi and luabidi, available\n"
- "separately).\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/tex.scm:5932
- msgid "Multi-page tables package"
- msgstr ""
- #: gnu/packages/tex.scm:5934
- msgid ""
- "This package was a predecessor of @code{longtable}; the newer\n"
- "package (designed on quite different principles) is easier to use and more\n"
- "flexible, in many cases, but supertabular retains its usefulness in a few\n"
- "situations where longtable has problems."
- msgstr ""
- #: gnu/packages/tex.scm:5967
- msgid "TeX macros to handle Texinfo files"
- msgstr ""
- #: gnu/packages/tex.scm:5969
- msgid ""
- "Texinfo is the preferred format for documentation in the GNU project;\n"
- "the format may be used to produce online or printed output from a single\n"
- "source. The Texinfo macros may be used to produce printable output using TeX;\n"
- "other programs in the distribution offer online interactive use (with\n"
- "hypertext linkages in some cases)."
- msgstr ""
- #: gnu/packages/tex.scm:5987
- msgid "Case conversion ignoring mathematics, etc"
- msgstr ""
- #: gnu/packages/tex.scm:5989
- msgid ""
- "The textcase package offers commands @code{\\MakeTextUppercase} and\n"
- "@code{\\MakeTextLowercase} are similar to the standard @code{\\MakeUppercase}\n"
- "and @code{\\MakeLowercase}, but they do not change the case of any sections of\n"
- "mathematics, or the arguments of @code{\\cite}, @code{\\label} and\n"
- "@code{\\ref} commands within the argument. A further command\n"
- "@code{\\NoCaseChange} does nothing but suppress case change within its\n"
- "argument, so to force uppercase of a section including an environment, one\n"
- "might say:\n"
- "\n"
- "@example\n"
- "\\MakeTextUppercase{...\\NoCaseChange{\\begin{foo}} ...\\NoCaseChange{\\end{foo}}...}\n"
- "@end example\n"
- msgstr ""
- #: gnu/packages/tex.scm:6017
- msgid "Show \"realistic\" quotes in verbatim"
- msgstr ""
- #: gnu/packages/tex.scm:6019
- msgid ""
- "Typewriter-style fonts are best for program listings, but Computer\n"
- "Modern Typewriter prints @code{`} and @code{'} as bent opening and closing\n"
- "single quotes. Other fonts, and most programming languages, print @code{`} as\n"
- "a grave accent and @code{'} upright; @code{'} is used both to open and to\n"
- "close quoted strings. The package switches the typewriter font to Computer\n"
- "Modern Typewriter in OT1 encoding, and modifies the behaviour of\n"
- "@code{verbatim}, @code{verbatim*}, @code{\\verb}, and @code{\\verb*} to print\n"
- "in the expected way. It does this regardless of other fonts or encodings in\n"
- "use, so long as the package is loaded after the other fonts were. The package\n"
- "does not affect @code{\\tt}, @code{\\texttt}, etc."
- msgstr ""
- #: gnu/packages/tex.scm:6058
- msgid "Simple package to set up document margins"
- msgstr ""
- #: gnu/packages/tex.scm:6060
- msgid ""
- "This is a simple package to set up document margins. This package is\n"
- "considered obsolete; alternatives are the @code{typearea} package from the\n"
- "@code{koma-script} bundle, or the @code{geometry} package."
- msgstr ""
- #: gnu/packages/tex.scm:6079
- msgid "Extra control of appendices"
- msgstr ""
- #: gnu/packages/tex.scm:6081
- msgid ""
- "The appendix package provides various ways of formatting the titles of\n"
- "appendices. Also (sub)appendices environments are provided that can be used,\n"
- "for example, for per chapter/section appendices. An @code{appendices}\n"
- "environment is provided which can be used instead of the @code{\\appendix}\n"
- "command."
- msgstr ""
- #: gnu/packages/tex.scm:6098
- msgid "Bookmark (outline) organization for hyperref"
- msgstr ""
- #: gnu/packages/tex.scm:6100
- msgid ""
- "This package implements a new bookmark (outline) organization for the\n"
- "@code{hyperref} package. Bookmark properties such as style and color. Other\n"
- "action types are available (URI, GoToR, Named)."
- msgstr ""
- #: gnu/packages/tex.scm:6119
- msgid "Generate changebars in LaTeX documents"
- msgstr ""
- #: gnu/packages/tex.scm:6121
- msgid ""
- "Identify areas of text to be marked with changebars with the\n"
- "@code{\\cbstart} and @code{\\cbend} commands; the bars may be coloured. The\n"
- "package uses @code{drivers} to place the bars; the available drivers can work\n"
- "with @code{dvitoln03}, @code{dvitops}, @code{dvips}, the emTeX and TeXtures DVI\n"
- "drivers, and VTeX and pdfTeX."
- msgstr ""
- #: gnu/packages/tex.scm:6156
- msgid "CMap support for PDF files"
- msgstr ""
- #: gnu/packages/tex.scm:6158
- msgid ""
- "This package embeds CMap tables into PDF files to make search and\n"
- "copy-and-paste functions work properly."
- msgstr ""
- #: gnu/packages/tex.scm:6176
- msgid "Add colour to LaTeX tables"
- msgstr ""
- #: gnu/packages/tex.scm:6178
- msgid ""
- "This package allows rows, columns, and even individual cells in LaTeX\n"
- "tables to be coloured."
- msgstr ""
- #: gnu/packages/tex.scm:6209
- msgid "Variants of \\fbox and other games with boxes"
- msgstr ""
- #: gnu/packages/tex.scm:6211
- msgid ""
- "This package provides variants of @code{\\fbox}: @code{\\shadowbox},\n"
- "@code{\\doublebox}, @code{\\ovalbox}, @code{\\Ovalbox}, with helpful tools for\n"
- "using box macros and flexible verbatim macros. You can box mathematics,\n"
- "floats, center, flushleft, and flushright, lists, and pages."
- msgstr ""
- #: gnu/packages/tex.scm:6244
- msgid "Extensive control of page headers and footers in LaTeX2e"
- msgstr ""
- #: gnu/packages/tex.scm:6246
- msgid ""
- "The package provides extensive facilities, both for constructing headers\n"
- "and footers, and for controlling their use (for example, at times when LaTeX\n"
- "would automatically change the heading style in use)."
- msgstr ""
- #: gnu/packages/tex.scm:6265
- msgid "Improved interface for floating objects"
- msgstr ""
- #: gnu/packages/tex.scm:6267
- msgid ""
- "This package improves the interface for defining floating objects such\n"
- "as figures and tables. It introduces the boxed float, the ruled float and the\n"
- "plaintop float. You can define your own floats and improve the behaviour of\n"
- "the old ones. The package also provides the @code{H} float modifier option of\n"
- "the obsolete @code{here} package. You can select this as automatic default\n"
- "with @code{\\floatplacement{figure}{H}}."
- msgstr ""
- #: gnu/packages/tex.scm:6289
- msgid "Range of footnote options"
- msgstr ""
- #: gnu/packages/tex.scm:6291
- msgid ""
- "This is a collection of ways to change the typesetting of footnotes.\n"
- "The package provides means of changing the layout of the footnotes themselves,\n"
- "a way to number footnotes per page, to make footnotes disappear in a\n"
- "\"moving\" argument, and to deal with multiple references to footnotes from\n"
- "the same place. The package also has a range of techniques for labelling\n"
- "footnotes with symbols rather than numbers."
- msgstr ""
- #: gnu/packages/tex.scm:6325
- msgid "Collection of unrelated LaTeX packages"
- msgstr ""
- #: gnu/packages/tex.scm:6327
- msgid ""
- "Frankenstein is a bundle of LaTeX packages serving various purposes and a\n"
- "BibTeX bibliography style. The individual packages are: @code{abbrevs},\n"
- "@code{achicago}, @code{achicago} bibstyle, @code{attrib}, @code{blkcntrl},\n"
- "@code{compsci}, @code{dialogue}, @code{lips}, @code{moredefs}, @code{newclude},\n"
- "@code{slemph} and @code{titles}. Note: The installation follows the suboptimal\n"
- "``Quick and dirty'' recipe, rendering some features unavailable."
- msgstr ""
- #: gnu/packages/tex.scm:6348
- msgid "Let assignment for macros"
- msgstr ""
- #: gnu/packages/tex.scm:6350
- msgid ""
- "TeX’s @code{\\let} assignment does not work for LaTeX macros with\n"
- "optional arguments, or for macros that are defined as robust macros by\n"
- "@code{\\DeclareRobustCommand}. This package defines @code{\\LetLtxMacro}\n"
- "that also takes care of the involved internal macros."
- msgstr ""
- #: gnu/packages/tex.scm:6374
- msgid "Typeset source code listings using LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:6376
- msgid ""
- "The package enables the user to typeset programs (programming code)\n"
- "within LaTeX; the source code is read directly by TeX---no front-end processor\n"
- "is needed. Keywords, comments and strings can be typeset using different\n"
- "styles. Support for @code{hyperref} is provided."
- msgstr ""
- #: gnu/packages/tex.scm:6412
- msgid "Miscellaneous packages by Joerg Knappen"
- msgstr ""
- #: gnu/packages/tex.scm:6414
- msgid ""
- "This package provides miscellaneous macros by Joerg Knappen, including:\n"
- "represent counters in greek; Maxwell's non-commutative division;\n"
- "@code{latin1jk}, @code{latin2jk} and @code{latin3jk}, which are\n"
- "@code{inputenc} definition files that allow verbatim input in the respective\n"
- "ISO Latin codes; blackboard bold fonts in maths; use of RSFS fonts in maths;\n"
- "extra alignments for @code{\\parboxes}; swap Roman and Sans fonts;\n"
- "transliterate semitic languages; patches to make (La)TeX formulae embeddable\n"
- "in SGML; use maths minus in text as appropriate; simple Young tableaux."
- msgstr ""
- #: gnu/packages/tex.scm:6436
- msgid "Key/value format for package options"
- msgstr ""
- #: gnu/packages/tex.scm:6438
- msgid ""
- "This package provides facilities for using key-value format in\n"
- "package options."
- msgstr ""
- #: gnu/packages/tex.scm:6505
- msgid "Computer modern fonts in T1 and TS1 encodings"
- msgstr ""
- #: gnu/packages/tex.scm:6507
- msgid ""
- "The EC fonts are European Computer Modern Fonts, supporting the complete\n"
- "LaTeX T1 encoding defined at the 1990 TUG conference hold at Cork/Ireland.\n"
- "These fonts are intended to be stable with no changes being made to the tfm\n"
- "files. The set also contains a Text Companion Symbol font, called @code{tc},\n"
- "featuring many useful characters needed in text typesetting, for example\n"
- "oldstyle digits, currency symbols (including the newly created Euro symbol),\n"
- "the permille sign, copyright, trade mark and servicemark as well as a copyleft\n"
- "sign, and many others. Recent releases of LaTeX2e support the EC fonts. The\n"
- "EC fonts supersede the preliminary version released as the DC fonts. The\n"
- "fonts are available in (traced) Adobe Type 1 format, as part of the\n"
- "@code{cm-super} bundle. The other Computer Modern-style T1-encoded Type 1\n"
- "set, Latin Modern, is not actually a direct development of the EC set, and\n"
- "differs from the EC in a number of particulars."
- msgstr ""
- #: gnu/packages/tex.scm:6538
- msgid "Virtual fonts for T1 encoded CMR-fonts"
- msgstr ""
- #: gnu/packages/tex.scm:6540
- msgid ""
- "This package provides a set of virtual fonts which emulates T1 coded\n"
- "fonts using the standard CM fonts. The package name, AE fonts, supposedly\n"
- "stands for \"Almost European\". The main use of the package was to produce\n"
- "PDF files using Adobe Type 1 versions of the CM fonts instead of bitmapped EC\n"
- "fonts. Note that direct substitutes for the bitmapped EC fonts are available,\n"
- "via the CM-super, Latin Modern and (in a restricted way) CM-LGC font sets."
- msgstr ""
- #: gnu/packages/tex.scm:6563
- msgid "Monospaced font with support files for use with TeX"
- msgstr ""
- #: gnu/packages/tex.scm:6565
- msgid ""
- "Inconsolata is a monospaced font designed by Raph Levien. This package\n"
- "contains the font (in both Adobe Type 1 and OpenType formats) in regular and\n"
- "bold weights, with additional glyphs and options to control slashed zero,\n"
- "upright quotes and a shapelier lower-case L, plus metric files for use with\n"
- "TeX, and LaTeX font definition and other relevant files."
- msgstr ""
- #: gnu/packages/tex.scm:6594
- msgid ""
- "This package provides a drop-in replacements for the Times font from\n"
- "Adobe's basic set."
- msgstr ""
- #: gnu/packages/tex.scm:6622
- msgid ""
- "This package provides a drop-in replacements for the Palatino font from\n"
- "Adobe's basic set."
- msgstr ""
- #: gnu/packages/tex.scm:6647
- msgid ""
- "This package provides a drop-in replacements for the Zapfding font from\n"
- "Adobe's basic set."
- msgstr ""
- #: gnu/packages/tex.scm:6664
- msgid "Spacing for mixed CJK-English documents in XeTeX"
- msgstr ""
- #: gnu/packages/tex.scm:6666
- msgid ""
- "The package manages spacing in a CJK document; between consecutive Chinese\n"
- "letters, spaces are ignored, but a consistent space is inserted between Chinese\n"
- "text and English (or mathematics). The package may be used by any document\n"
- "format under XeTeX."
- msgstr ""
- #: gnu/packages/tex.scm:6705
- msgid "Reference scheme for LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:6706
- msgid ""
- "This package offers a means to remove the limitation, of\n"
- "only two properties, that is inherent in the way LaTeX's reference system\n"
- "works. The package implements an extensible referencing system, where\n"
- "properties may be defined and used in the course of a document. It provides\n"
- "an interface for macro programmers to access the new reference scheme and some\n"
- "modules that use it. Modules available are:\n"
- "@table @code\n"
- "@item zref-user\n"
- "use zref for traditional labels and references;\n"
- "@item zref-abspage\n"
- "retrieve absolute page numbers (physical pages, as opposed to the logical page\n"
- "number that is normally typeset when a page number is requested;\n"
- "@item zref-lastpage\n"
- "provide a zref-label for the last page of the document;\n"
- "@item zref-nextpage\n"
- "provide the page number of the next page of the document;\n"
- "@item zref-totpages\n"
- "provide the total number of pages in the document;\n"
- "@item zref-pagelayout\n"
- "provide the page layout parameters of a each page (which may then be printed\n"
- "at the end of the document);\n"
- "@item zref-perpage\n"
- "make a counter reset for each new page;\n"
- "@item zref-titleref\n"
- "make section title or caption text available through the reference system;\n"
- "@item zref-savepos\n"
- "make positions on a page available;\n"
- "@item zref-dotfill\n"
- "controlled dot-filling\n"
- "@item zref-env\n"
- "record the latest environment's name and the line it started on;\n"
- "@item zref-xr\n"
- "provide the facilities of the xr and xr-hyper packages.\n"
- "@end table"
- msgstr ""
- #: gnu/packages/tex.scm:6807
- msgid "Ralph Smith's Formal Script font"
- msgstr ""
- #: gnu/packages/tex.scm:6809
- msgid ""
- "The fonts provide uppercase formal script letters for use as symbols in\n"
- "scientific and mathematical typesetting (in contrast to the informal script\n"
- "fonts such as that used for the calligraphic symbols in the TeX maths symbol\n"
- "font). The fonts are provided as Metafont source, and as derived Adobe Type 1\n"
- "format. LaTeX support, for using these fonts in mathematics, is available via\n"
- "one of the packages @code{calrsfs} and @code{mathrsfs}."
- msgstr ""
- #: gnu/packages/tex.scm:6831
- msgid "Add picture commands (or backgrounds) to every page"
- msgstr ""
- #: gnu/packages/tex.scm:6833
- msgid ""
- "The package adds one or more user commands to LaTeX's @code{shipout}\n"
- "routine, which may be used to place the output at fixed positions. The\n"
- "@code{grid} option may be used to find the correct places."
- msgstr ""
- #: gnu/packages/tex.scm:6865
- msgid "Extensions to epic and the LaTeX drawing tools"
- msgstr ""
- #: gnu/packages/tex.scm:6867
- msgid ""
- "Extensions to @code{epic} and the LaTeX picture drawing environment,\n"
- "include the drawing of lines at any slope, the drawing of circles in any\n"
- "radii, and the drawing of dotted and dashed lines much faster with much less\n"
- "TeX memory, and providing several new commands for drawing ellipses, arcs,\n"
- "splines, and filled circles and ellipses. The package uses @code{tpic}\n"
- "@code{\\special} commands."
- msgstr ""
- #: gnu/packages/tex.scm:6885
- msgid "Support for end-notes"
- msgstr ""
- #: gnu/packages/tex.scm:6887
- msgid ""
- "This package allows nested endnotes, supports @code{hyperref} and\n"
- "provides means for easy customization of the list of notes."
- msgstr ""
- #: gnu/packages/tex.scm:6901
- msgid "Deal with endnotesings in strings"
- msgstr ""
- #: gnu/packages/tex.scm:6903
- msgid ""
- "Accumulates notes (using the @code{\\endnote} command, which can be used\n"
- "as a replacement for @code{\\footnote}), and places them at the end of\n"
- "the section, chapter or document."
- msgstr ""
- #: gnu/packages/tex.scm:6917
- msgid "Customize basic list environments"
- msgstr ""
- #: gnu/packages/tex.scm:6919
- msgid ""
- "This package is intended to ease customizing the three basic list\n"
- "environments: @code{enumerate}, @code{itemize} and @code{description}. It\n"
- "extends their syntax to allow an optional argument where a set of parameters\n"
- "in the form @code{key=value} are available, for example:\n"
- "@code{\\begin{itemize}[itemsep=1ex,leftmargin=1cm]}."
- msgstr ""
- #: gnu/packages/tex.scm:6942
- msgid "Create tabular cells spanning multiple rows"
- msgstr ""
- #: gnu/packages/tex.scm:6944
- msgid ""
- "The package provides tools for creating tabular cells spanning multiple\n"
- "rows. It has a lot of flexibility, including an option for specifying an\n"
- "entry at the \"natural\" width of its text."
- msgstr ""
- #: gnu/packages/tex.scm:6976
- msgid "Combine LaTeX commands over included graphics"
- msgstr ""
- #: gnu/packages/tex.scm:6978
- msgid ""
- "The @code{overpic} environment is a cross between the LaTeX\n"
- "@code{picture} environment and the @code{\\includegraphics} command of\n"
- "@code{graphicx}. The resulting picture environment has the same dimensions as\n"
- "the included graphic. LaTeX commands can be placed on the graphic at defined\n"
- "positions; a grid for orientation is available."
- msgstr ""
- #: gnu/packages/tex.scm:7012
- msgid "Layout with zero \\parindent, non-zero \\parskip"
- msgstr ""
- #: gnu/packages/tex.scm:7014
- msgid ""
- "Simply changing @code{\\parskip} and @code{\\parindent} leaves a layout\n"
- "that is untidy; this package (though it is no substitute for a properly\n"
- "designed class) helps alleviate this untidiness."
- msgstr ""
- #: gnu/packages/tex.scm:7029
- msgid "\\parbox with a variable width"
- msgstr ""
- #: gnu/packages/tex.scm:7031
- msgid ""
- "@code{pbox} defines a \\pbox{<max width>}{<text>} command which adjusts\n"
- "the box width to that of the enclosed text, up to the maximum width given. The\n"
- "package also defines some associated length commands."
- msgstr ""
- #: gnu/packages/tex.scm:7050
- msgid "Include PDF documents in LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:7052
- msgid ""
- "This package simplifies the inclusion of external multi-page PDF\n"
- "documents in LaTeX documents. Pages may be freely selected and it is possible\n"
- "to put several logical pages onto each sheet of paper. Furthermore a lot of\n"
- "hypertext features like hyperlinks and article threads are provided. The\n"
- "package supports pdfTeX (pdfLaTeX) and VTeX. With VTeX it is even possible to\n"
- "use this package to insert PostScript files, in addition to PDF files."
- msgstr ""
- #: gnu/packages/tex.scm:7087
- msgid "OpenType Unicode text and maths fonts"
- msgstr ""
- #: gnu/packages/tex.scm:7088
- msgid ""
- "The Scientific and Technical Information eXchange (STIX)\n"
- "fonts are intended to satisfy the demanding needs of authors, publishers,\n"
- "printers, and others working in the scientific, medical, and technical fields.\n"
- "They combine a comprehensive Unicode-based collection of mathematical symbols\n"
- "and alphabets with a set of text faces suitable for professional publishing."
- msgstr ""
- #: gnu/packages/tex.scm:7105
- msgid "Typeset captions sideways"
- msgstr ""
- #: gnu/packages/tex.scm:7107
- msgid ""
- "@code{sidecap} defines environments called @code{SCfigure} and\n"
- "@code{SCtable} (analogous to @code{figure} and @code{table}) to typeset\n"
- "captions sideways. Options include @code{outercaption}, @code{innercaption},\n"
- "@code{leftcaption} and @code{rightcaption}."
- msgstr ""
- #: gnu/packages/tex.scm:7152
- msgid "St Mary Road symbols for theoretical computer science"
- msgstr ""
- #: gnu/packages/tex.scm:7154
- msgid ""
- "The fonts were originally distributed as Metafont sources only, but\n"
- "Adobe Type 1 versions are also now available. Macro support is provided for\n"
- "use under LaTeX; the package supports the @code{only} option (provided by the\n"
- "@code{somedefs} package) to restrict what is loaded, for those who don't need\n"
- "the whole font."
- msgstr ""
- #: gnu/packages/tex.scm:7177
- msgid "Figures divided into subfigures"
- msgstr ""
- #: gnu/packages/tex.scm:7179
- msgid ""
- "This (deprecated) package provides support for the manipulation and\n"
- "reference of small or \"sub\" figures and tables within a single figure or\n"
- "table environment. It is convenient to use this package when your subfigures\n"
- "are to be separately captioned, referenced, or are to be included in the\n"
- "List-of-Figures. A new @code{\\subfigure} command is introduced which can be\n"
- "used inside a figure environment for each subfigure. An optional first\n"
- "argument is used as the caption for that subfigure. The package is now\n"
- "considered obsolete: it was superseded by @code{subfig}, but users may find\n"
- "the more recent @code{subcaption} package more satisfactory."
- msgstr ""
- #: gnu/packages/tex.scm:7204
- msgid "Tabular with variable width columns balanced"
- msgstr ""
- #: gnu/packages/tex.scm:7206
- msgid ""
- "The package defines a @code{tabular*}-like environment, @code{tabulary},\n"
- "taking a \"total width\" argument as well as the column specifications. The\n"
- "environment uses column types @code{L}, @code{C}, @code{R} and @code{J} for\n"
- "variable width columns (@code{\\raggedright}, @code{\\centering},\n"
- "@code{\\raggedleft}, and normally justified). In contrast to\n"
- "@code{tabularx}'s @code{X} columns, the width of each column is weighted\n"
- "according to the natural width of the widest cell in the column."
- msgstr ""
- #: gnu/packages/tex.scm:7242
- msgid "Tables with captions and notes all the same width"
- msgstr ""
- #: gnu/packages/tex.scm:7244
- msgid ""
- "This package facilitates tables with titles (captions) and notes. The\n"
- "title and notes are given a width equal to the body of the table (a\n"
- "@code{tabular} environment). By itself, a @code{threeparttable} does not\n"
- "float, but you can put it in a @code{table} or a @code{table*} or some other\n"
- "environment."
- msgstr ""
- #: gnu/packages/tex.scm:7269
- msgid "Times-like fonts in support of mathematics"
- msgstr ""
- #: gnu/packages/tex.scm:7271
- msgid ""
- "Txfonts supplies virtual text roman fonts using Adobe Times (or URW\n"
- "NimbusRomNo9L) with some modified and additional text symbols in the OT1, T1,\n"
- "and TS1 encodings; maths alphabets using Times/URW Nimbus; maths fonts\n"
- "providing all the symbols of the Computer Modern and AMS fonts, including all\n"
- "the Greek capital letters from CMR; and additional maths fonts of various\n"
- "other symbols.\n"
- "\n"
- "The set is complemented by a sans-serif set of text fonts, based on\n"
- "Helvetica/NimbusSanL, and a monospace set.\n"
- "\n"
- "All the fonts are in Type 1 format (AFM and PFB files), and are supported by\n"
- "TeX metrics (VF and TFM files) and macros for use with LaTeX."
- msgstr ""
- #: gnu/packages/tex.scm:7319
- msgid "Sans-serif typeface for TeX"
- msgstr ""
- #: gnu/packages/tex.scm:7320
- msgid ""
- "Iwona is a two-element sans-serif typeface. It was created\n"
- "as an alternative version of the Kurier typeface, which was designed in 1975\n"
- "for a diploma in typeface design at the Warsaw Academy of Fine Arts under the\n"
- "supervision of Roman Tomaszewski. Kurier was designed for linotype\n"
- "typesetting of newspapers and similar periodicals. The Iwona fonts are an\n"
- "alternative version of the Kurier fonts. The difference lies in the absence\n"
- "of ink traps which typify the Kurier font."
- msgstr ""
- #: gnu/packages/tex.scm:7341
- msgid "Miscellaneous packages by Jörg Knappen"
- msgstr ""
- #: gnu/packages/tex.scm:7343
- msgid ""
- "This package contains a collection of macros by Jörg Knappen:\n"
- "@table @code\n"
- "@item greekctr\n"
- "New counterstyles @code{\\greek} and @code{\\Greek}.\n"
- "@item holtpolt\n"
- "Non-commutative fractions\n"
- "@item latin1jk\n"
- "@itemx latin2jk\n"
- "@itemx latin3jk\n"
- "Inputenc definition files that allow verbatim input in the respective ISO\n"
- "Latin codes.\n"
- "@item mathbol\n"
- "Blackboard bold fonts for use in maths.\n"
- "@item mathrsfs\n"
- "Mathematical script letters, as traditionally used in physics for Lagrangian,\n"
- "Hamiltonian, path integral measures, etc.\n"
- "@item parboxx\n"
- "New alignment options for parboxen at top and bottom of the box.\n"
- "@item sans\n"
- "Interchanges the roles of sans serif and roman fonts throughout the document.\n"
- "@item semtrans\n"
- "Support for special latin letters and diacritics used in transliteration of\n"
- "semitic languages\n"
- "@item smartmn\n"
- "Intelligent hyphen/minus, which guesses whether to render as hyphen or minus.\n"
- "@item sgmlcmpt\n"
- "Commands replacing the characters <, >, and &.\n"
- "@item tccompat\n"
- "A compatibility package for users of the older versions of the textcomp package.\n"
- "@item young\n"
- "Simple Young tableaux.\n"
- "@end table"
- msgstr ""
- #: gnu/packages/tex.scm:7449
- msgid "TeX macros to produce TeX output using OpenJade"
- msgstr ""
- #: gnu/packages/tex.scm:7450
- msgid ""
- "JadeTeX is a companion package to the OpenJade DSSSL\n"
- "processor. OpenJade applies a DSSSL stylesheet to an SGML or XML document.\n"
- "The output of this process can be in a number of forms, including a set of\n"
- "high level LaTeX macros. It is the task of the JadeTeX package to transform\n"
- "these macros into DVI/PostScript (using the @command{jadetex} command) or\n"
- "Portable Document Format (PDF) form (using the @command{pdfjadetex}\n"
- "command)."
- msgstr ""
- #: gnu/packages/tex.scm:7478
- msgid "Use Linux Libertine and Biolinum fonts with LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:7480
- msgid ""
- "The package provides the Libertine and Biolinum fonts in both Type 1 and\n"
- "OTF styles, together with support macros for their use. Monospaced and\n"
- "display fonts, and the \"keyboard\" set are also included, in OTF style, only.\n"
- "The @code{mweights} package is used to manage the selection of font weights.\n"
- "The package supersedes both the @code{libertineotf} and the\n"
- "@code{libertine-legacy} packages."
- msgstr ""
- #: gnu/packages/tex.scm:7510
- msgid "LaTeX support for the DejaVu fonts"
- msgstr ""
- #: gnu/packages/tex.scm:7512
- msgid ""
- "The package contains LaTeX support for the DejaVu fonts, which are\n"
- "derived from the Vera fonts but contain more characters and styles. The fonts\n"
- "are included in the original TrueType format, and in converted Type 1 format.\n"
- "The (currently) supported encodings are: OT1, T1, IL2, TS1, T2*, X2, QX, and\n"
- "LGR. The package doesn't (currently) support mathematics."
- msgstr ""
- #: gnu/packages/tex.scm:7546
- msgid "Select alternative section titles"
- msgstr ""
- #: gnu/packages/tex.scm:7548
- msgid ""
- "This package provides an interface to sectioning commands for selection\n"
- "from various title styles, e.g. for marginal titles and to change the font of\n"
- "all headings with a single command, also providing simple one-step page\n"
- "styles. It also includes a package to change the page styles when there are\n"
- "floats in a page. You may assign headers/footers to individual floats, too."
- msgstr ""
- #: gnu/packages/tex.scm:7569
- msgid "Arbitrary size font selection in LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:7571
- msgid ""
- "LaTeX, by default, restricts the sizes at which you can use its default\n"
- "computer modern fonts, to a fixed set of discrete sizes (effectively, a set\n"
- "specified by Knuth). The @code{type1cm} package removes this restriction;\n"
- "this is particularly useful when using scalable versions of the CM\n"
- "fonts (Bakoma, or the versions from BSR/Y&Y, or True Type versions from Kinch,\n"
- "PCTeX, etc.). In fact, since modern distributions will automatically generate\n"
- "any bitmap font you might need, @code{type1cm} has wider application than just\n"
- "those using scalable versions of the fonts. Note that the LaTeX distribution\n"
- "now contains a package @code{fix-cm},f which performs the task of\n"
- "@code{type1cm}, as well as doing the same job for T1- and TS1-encoded\n"
- "@code{ec} fonts."
- msgstr ""
- #: gnu/packages/tex.scm:7623
- msgid "Cyrillic fonts that support LaTeX standard encodings"
- msgstr ""
- #: gnu/packages/tex.scm:7625
- msgid ""
- "The LH fonts address the problem of the wide variety of alphabets that\n"
- "are written with Cyrillic-style characters. The fonts are the original basis\n"
- "of the set of T2* and X2 encodings that are now used when LaTeX users need to\n"
- "write in Cyrillic languages. Macro support in standard LaTeX encodings is\n"
- "offered through the latex-cyrillic and t2 bundles, and the package itself\n"
- "offers support for other (more traditional) encodings. The fonts, in the\n"
- "standard T2* and X2 encodings are available in Adobe Type 1 format, in the\n"
- "CM-Super family of fonts. The package also offers its own LaTeX support for\n"
- "OT2 encoded fonts, CM bright shaped fonts and Concrete shaped fonts."
- msgstr ""
- #: gnu/packages/tex.scm:7654
- msgid "Martin Vogel's Symbols (marvosym) font"
- msgstr ""
- #: gnu/packages/tex.scm:7655
- msgid ""
- "The Martin Vogel’s Symbols fonts (marvosym) contains the\n"
- "Euro currency symbol as defined by the European commission, along with symbols\n"
- "for structural engineering, symbols for steel cross-sections, astronomy\n"
- "signs (sun, moon, planets), the 12 signs of the zodiac, scissor symbols, CE\n"
- "sign and others. This package contains both the original TrueType font and\n"
- "the derived Type 1 font, together with support files for TeX (LaTeX)."
- msgstr ""
- #: gnu/packages/tex.scm:7691
- msgid "Create scalable illustrations"
- msgstr ""
- #: gnu/packages/tex.scm:7693
- msgid ""
- "MetaPost uses a language based on that of Metafont to produce precise\n"
- "technical illustrations. Its output is scalable PostScript or SVG, rather\n"
- "than the bitmaps Metafont creates."
- msgstr ""
- #: gnu/packages/tex.scm:7712
- msgid "Class for typesetting publications of ACM"
- msgstr ""
- #: gnu/packages/tex.scm:7714
- msgid ""
- "This package provides a class for typesetting publications of the\n"
- "Association for Computing Machinery (ACM)."
- msgstr ""
- #: gnu/packages/tex.scm:7745
- msgid "Variable-width minipage"
- msgstr ""
- #: gnu/packages/tex.scm:7747
- msgid ""
- "The @code{varwidth} environment is superficially similar to\n"
- "@code{minipage}, but the specified width is just a maximum value — the box may\n"
- "get a narrower “natural” width."
- msgstr ""
- #: gnu/packages/tex.scm:7760
- msgid "Variable-width minipage LaTeX environment"
- msgstr ""
- #: gnu/packages/tex.scm:7762
- msgid ""
- "The varwidth environment is superficially similar to minipage, but the\n"
- "specified width is just a maximum value --- the box may get a narrower natural\n"
- "width."
- msgstr ""
- #: gnu/packages/tex.scm:7779
- msgid "Waldi symbol fonts"
- msgstr ""
- #: gnu/packages/tex.scm:7780
- msgid ""
- "This package provides the @code{wasy} (Waldi symbol) fonts,\n"
- "in the Metafont and Adobe Type 1 formats. Support under LaTeX is provided by\n"
- "the @code{wasysym} package."
- msgstr ""
- #: gnu/packages/tex.scm:7799
- msgid "LaTeX support file to use the @code{wasy} fonts"
- msgstr ""
- #: gnu/packages/tex.scm:7801
- msgid ""
- "The @code{wasy} (Waldi Symbol) font by Roland Waldi provides many glyphs like\n"
- "male and female symbols and astronomical symbols, as well as the complete\n"
- "@code{lasy} font set and other odds and ends. The @code{wasysym} package\n"
- "implements an easy to use interface for these symbols."
- msgstr ""
- #: gnu/packages/tex.scm:7818
- msgid "Produces figures which text can flow around"
- msgstr ""
- #: gnu/packages/tex.scm:7820
- msgid ""
- "This package allows figures or tables to have text wrapped around them.\n"
- "It does not work in combination with list environments, but can be used in a\n"
- "@code{parbox} or @code{minipage}, and in two-column format."
- msgstr ""
- #: gnu/packages/tex.scm:7854
- msgid "Extended UTF-8 input encoding support for LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:7856
- msgid ""
- "The bundle provides the @code{ucs} package, and @code{utf8x.def},\n"
- "together with a large number of support files. The @code{utf8x.def}\n"
- "definition file for use with @code{inputenc} covers a wider range of Unicode\n"
- "characters than does @code{utf8.def} in the LaTeX distribution. The package\n"
- "provides facilities for efficient use of its large sets of Unicode characters.\n"
- "Glyph production may be controlled by various options, which permits use of\n"
- "non-ASCII characters when coding mathematical formulae. Note that the bundle\n"
- "previously had an alias “unicode”; that alias has now been withdrawn, and no\n"
- "package of that name now exists."
- msgstr ""
- #: gnu/packages/tex.scm:7888
- msgid "Extract bits of a LaTeX source for output"
- msgstr ""
- #: gnu/packages/tex.scm:7890
- msgid ""
- "The main purpose of the preview package is the extraction of selected\n"
- "elements from a LaTeX source, like formulas or graphics, into separate\n"
- "pages of a DVI file. A flexible and convenient interface allows it to\n"
- "specify what commands and constructs should be extracted. This works\n"
- "with DVI files postprocessed by either Dvips and Ghostscript or\n"
- "dvipng, but it also works when you are using PDFTeX for generating PDF\n"
- "files."
- msgstr ""
- #: gnu/packages/tex.scm:7913
- msgid "Expand acronyms at least once"
- msgstr ""
- #: gnu/packages/tex.scm:7915
- msgid ""
- "This package ensures that all acronyms used in the text are spelled out\n"
- "in full at least once. It also provides an environment to build a list of\n"
- "acronyms used. The package is compatible with PDF bookmarks. The package\n"
- "requires the suffix package, which in turn requires that it runs under\n"
- "e-TeX."
- msgstr ""
- #: gnu/packages/tex.scm:7950
- msgid "TeX extension for direct creation of PDF"
- msgstr ""
- #: gnu/packages/tex.scm:7952
- msgid ""
- "This package provides an extension of TeX which can be configured to\n"
- "directly generate PDF documents instead of DVI."
- msgstr ""
- #: gnu/packages/tex.scm:8032
- msgid ""
- "TeX Live provides a comprehensive TeX document production system.\n"
- "It includes all the major TeX-related programs, macro packages, and fonts\n"
- "that are free software, including support for many languages around the\n"
- "world.\n"
- "\n"
- "This package contains the complete tree of texmf-dist data."
- msgstr ""
- #: gnu/packages/tex.scm:8095
- msgid ""
- "TeX Live provides a comprehensive TeX document production system.\n"
- "It includes all the major TeX-related programs, macro packages, and fonts\n"
- "that are free software, including support for many languages around the\n"
- "world.\n"
- "\n"
- "This package contains the complete TeX Live distribution."
- msgstr ""
- #: gnu/packages/tex.scm:8136
- msgid "Interface to read and parse BibTeX files"
- msgstr ""
- #: gnu/packages/tex.scm:8137
- msgid ""
- "@code{Text::BibTeX} is a Perl library for reading, parsing,\n"
- "and processing BibTeX files. @code{Text::BibTeX} gives you access to the data\n"
- "at many different levels: you may work with BibTeX entries as simple field to\n"
- "string mappings, or get at the original form of the data as a list of simple\n"
- "values (strings, macros, or numbers) pasted together."
- msgstr ""
- #: gnu/packages/tex.scm:8222
- msgid "Backend for the BibLaTeX citation management tool"
- msgstr ""
- #: gnu/packages/tex.scm:8223
- msgid ""
- "Biber is a BibTeX replacement for users of biblatex. Among\n"
- "other things it comes with full Unicode support."
- msgstr ""
- #: gnu/packages/tex.scm:8255
- msgid "Wrapper for LaTeX and friends"
- msgstr ""
- #: gnu/packages/tex.scm:8257
- msgid ""
- "Rubber is a program whose purpose is to handle all tasks related to the\n"
- "compilation of LaTeX documents. This includes compiling the document itself,\n"
- "of course, enough times so that all references are defined, and running BibTeX\n"
- "to manage bibliographic references. Automatic execution of dvips to produce\n"
- "PostScript documents is also included, as well as usage of pdfLaTeX to produce\n"
- "PDF documents."
- msgstr ""
- #: gnu/packages/tex.scm:8295
- msgid "LaTeX editor"
- msgstr ""
- #: gnu/packages/tex.scm:8296
- msgid ""
- "Texmaker is a program that integrates many tools needed to\n"
- "develop documents with LaTeX, in a single application."
- msgstr ""
- #: gnu/packages/tex.scm:8353
- msgid "Book on TeX, plain TeX and Eplain"
- msgstr ""
- #: gnu/packages/tex.scm:8355
- msgid ""
- "@i{TeX for the Impatient} is a ~350 page book on TeX,\n"
- "plain TeX, and Eplain, originally written by Paul Abrahams, Kathryn Hargreaves,\n"
- "and Karl Berry."
- msgstr ""
- #: gnu/packages/tex.scm:8422
- msgid "Document preparation system with GUI"
- msgstr ""
- #: gnu/packages/tex.scm:8423
- msgid ""
- "LyX is a document preparation system. It excels at letting\n"
- "you create complex technical and scientific articles with mathematics,\n"
- "cross-references, bibliographies, indexes, etc. It is very good for working\n"
- "with documents of any length in which the usual processing abilities are\n"
- "required: automatic sectioning and pagination, spell checking and so forth."
- msgstr ""
- #: gnu/packages/tex.scm:8457
- msgid "Multimedia inclusion package with Adobe Reader-9/X compatibility"
- msgstr ""
- #: gnu/packages/tex.scm:8459
- msgid ""
- "The package provides an interface to embed interactive Flash (SWF) and 3D\n"
- "objects (Adobe U3D & PRC), as well as video and sound files or streams in the\n"
- "popular MP4, FLV and MP3 formats into PDF documents with Acrobat-9/X\n"
- "compatibility. Playback of multimedia files uses the built-in Flash Player of\n"
- "Adobe Reader and does, therefore, not depend on external plug-ins. Flash Player\n"
- "supports the efficient H.264 codec for video compression.\n"
- "\n"
- "The package is based on the RichMedia Annotation, an Adobe addition to the PDF\n"
- "specification. It replaces the now obsolete @code{movie15} package."
- msgstr ""
- #: gnu/packages/tex.scm:8497
- msgid "Provide OCG (Optional Content Groups) support within a PDF document"
- msgstr ""
- #: gnu/packages/tex.scm:8499
- msgid ""
- "This package provides OCG (Optional Content Groups) support within a PDF\n"
- "document.\n"
- "\n"
- "It re-implements the functionality of the @code{ocg}, @code{ocgx}, and\n"
- "@code{ocg-p} packages and adds support for all known engines and back-ends\n"
- "including:\n"
- "\n"
- "@itemize\n"
- "@item LaTeX → dvips → @code{ps2pdf}/Distiller\n"
- "@item (Xe)LaTeX(x) → @code{dvipdfmx}\n"
- "@item pdfLaTeX and LuaLaTeX .\n"
- "@end itemize\n"
- "\n"
- "It also ensures compatibility with the @code{media9} and @code{animate} packages."
- msgstr ""
- #: gnu/packages/tex.scm:8531
- msgid "Various LATEX packages by Martin Schröder"
- msgstr ""
- #: gnu/packages/tex.scm:8533
- msgid ""
- "A bundle of LATEX packages by Martin Schröder; the collection comprises:\n"
- "\n"
- "@itemize\n"
- "@item @command{count1to}, make use of fixed TEX counters;\n"
- "@item @command{everysel}, set commands to execute every time a font is selected;\n"
- "@item @command{everyshi}, set commands to execute whenever a page is shipped out;\n"
- "@item @command{multitoc}, typeset the table of contents in multiple columns;\n"
- "@item @command{prelim2e}, mark typeset pages as preliminary; and\n"
- "@item @command{ragged2e}, typeset ragged text and allow hyphenation.\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/tex.scm:8577
- msgid "Print numbers with separators and exponent if necessary"
- msgstr ""
- #: gnu/packages/tex.scm:8579
- msgid ""
- "The package numprint prints numbers with a separator every three\n"
- "digits and converts numbers given as 12345.6e789 to 12\\,345,6\\cdot\n"
- "10^{789}. Numbers are printed in the current mode (text or math) in\n"
- "order to use the correct font.\n"
- "\n"
- "Many things, including the decimal sign, the thousand separator, as\n"
- "well as the product sign can be changed by the user, e.g., to reach\n"
- "12,345.6\\times 10^{789}.\n"
- "\n"
- "If an optional argument is given it is printed upright as unit.\n"
- "Numbers can be rounded to a given number of digits. The package\n"
- "supports an automatic, language-dependent change of the number format.\n"
- "\n"
- "Tabular alignment using the tabular, array, tabularx, and longtable\n"
- "environments (similar to the dcolumn and rccol packages) is supported\n"
- "using all features of numprint. Additional text can be added before\n"
- "and after the formatted number."
- msgstr ""
- #: gnu/packages/tex.scm:8618
- msgid "Insert pagebreak if not enough space"
- msgstr ""
- #: gnu/packages/tex.scm:8620
- msgid ""
- "Provides commands to disable pagebreaking within a given vertical\n"
- "space. If there is not enough space between the command and the bottom of the\n"
- "page, a new page will be started."
- msgstr ""
- #: gnu/packages/tex.scm:8644
- msgid "Margin adjustment and detection of odd/even pages"
- msgstr ""
- #: gnu/packages/tex.scm:8646
- msgid ""
- "The package provides commands to change the page layout in the middle of\n"
- "a document, and to robustly check for typesetting on odd or even pages.\n"
- "Instructions for use are at the end of the file. The package is an extraction\n"
- "of code from the @code{memoir} class, whose user interface it shares."
- msgstr ""
- #: gnu/packages/tex.scm:8680
- msgid "UK format dates, with weekday"
- msgstr ""
- #: gnu/packages/tex.scm:8682
- msgid ""
- "The package is used to change the format of @code{\\today}’s date,\n"
- "including the weekday, e.g., \"Saturday, 26 June 2008\", the 'UK format', which\n"
- "is preferred in many parts of the world, as distinct from that which is used in\n"
- "@code{\\maketitle} of the article class, \"June 26, 2008\", the 'US format'."
- msgstr ""
- #: gnu/packages/tex.scm:8696
- msgid "Underline text in TeX"
- msgstr ""
- #: gnu/packages/tex.scm:8698
- msgid ""
- "The package provides an @code{\\ul} (underline) command which will break\n"
- "over line ends; this technique may be used to replace @code{\\em} (both in that\n"
- "form and as the @code{\\emph} command), so as to make output look as if it comes\n"
- "from a typewriter. The package also offers double and wavy underlining, and\n"
- "striking out (line through words) and crossing out (/// over words)."
- msgstr ""
- #: gnu/packages/tex.scm:8754
- msgid "Create PostScript and PDF graphics in TeX"
- msgstr ""
- #: gnu/packages/tex.scm:8756
- msgid ""
- "PGF is a macro package for creating graphics. It is platform- and\n"
- "format-independent and works together with the most important TeX backend\n"
- "drivers, including pdfTeX and dvips. It comes with a user-friendly syntax layer\n"
- "called TikZ.\n"
- "\n"
- "Its usage is similar to pstricks and the standard picture environment. PGF\n"
- "works with plain (pdf-)TeX, (pdf-)LaTeX, and ConTeXt. Unlike pstricks, it can\n"
- "produce either PostScript or PDF output."
- msgstr ""
- #: gnu/packages/tex.scm:8803
- msgid "Bundle of versatile classes and packages"
- msgstr ""
- #: gnu/packages/tex.scm:8805
- msgid ""
- "The KOMA-Script bundle provides replacements for the article, report, and\n"
- "book classes with emphasis on typography and versatility. There is also a\n"
- "letter class.\n"
- "\n"
- "The bundle also offers:\n"
- "\n"
- "@itemize\n"
- "@item a package for calculating type areas in the way laid down by the\n"
- "typographer Jan Tschichold,\n"
- "@item packages for easily changing and defining page styles,\n"
- "@item a package scrdate for getting not only the current date but also the name\n"
- "of the day, and\n"
- "@item a package scrtime for getting the current time.\n"
- "@end itemize\n"
- "\n"
- "All these packages may be used not only with KOMA-Script classes but also with\n"
- "the standard classes.\n"
- "\n"
- "Since every package has its own version number, the version number quoted only\n"
- "refers to the version of scrbook, scrreprt, scrartcl, scrlttr2 and\n"
- "typearea (which are the main parts of the bundle)."
- msgstr ""
- #: gnu/packages/tex.scm:8838
- msgid "Execute commands at @code{\\shipout} time"
- msgstr ""
- #: gnu/packages/tex.scm:8840
- msgid ""
- "This package is a modern reimplementation of package @code{everyshi},\n"
- "providing various commands to be executed before a @code{\\shipout} command.\n"
- "It makes use of e-TeX’s facilities if they are available. The package may\n"
- "be used either with LaTeX or with plain TeX."
- msgstr ""
- #: gnu/packages/tex.scm:8858
- msgid "Integer calculations on very large numbers"
- msgstr ""
- #: gnu/packages/tex.scm:8860
- msgid ""
- "This package provides expandable arithmetic operations with big\n"
- "integers that can exceed TeX's number limits."
- msgstr ""
- #: gnu/packages/tex.scm:8877
- msgid "Handle bit-vector datatype"
- msgstr ""
- #: gnu/packages/tex.scm:8879
- msgid ""
- "This package defines and implements the data type bit set, a vector\n"
- "of bits. The size of the vector may grow dynamically. Individual bits\n"
- "can be manipulated."
- msgstr ""
- #: gnu/packages/tex.scm:8896
- msgid "Avoid name clashes with e-TeX commands"
- msgstr ""
- #: gnu/packages/tex.scm:8898
- msgid ""
- "New primitive commands are introduced in e-TeX; sometimes the names\n"
- "collide with existing macros. This package solves the name clashes by\n"
- "adding a prefix to e-TeX’s commands. For example, ε-TeX’s\n"
- "@code{\\unexpanded} is provided as @code{\\etex@@unexpanded}."
- msgstr ""
- #: gnu/packages/tex.scm:8914
- msgid "Clean up title references"
- msgstr ""
- #: gnu/packages/tex.scm:8916
- msgid ""
- "This package provides commands for cleaning up the title string\n"
- "(such as removing @code{\\label} commands) for packages that typeset such\n"
- "strings."
- msgstr ""
- #: gnu/packages/tex.scm:8930
- msgid "Information/warning/error macros"
- msgstr ""
- #: gnu/packages/tex.scm:8932
- msgid ""
- "This package provides a complete set of macros for information,\n"
- "warning and error messages. Under LaTeX, the commands are wrappers for\n"
- "the corresponding LaTeX commands; under Plain TeX they are available as\n"
- "complete implementations."
- msgstr ""
- #: gnu/packages/tex.scm:8947
- msgid "Expandable arithmetic operations with integers"
- msgstr ""
- #: gnu/packages/tex.scm:8949
- msgid ""
- "This package provides expandable arithmetic operations with integers,\n"
- "using the e-TeX extension @code{\\numexpr} if it is available."
- msgstr ""
- #: gnu/packages/tex.scm:8962
- msgid "Define keys for use in the @code{kvsetkeys} package"
- msgstr ""
- #: gnu/packages/tex.scm:8964
- msgid ""
- "This package provides the @code{\\kv@@define@@key} (analogous to\n"
- "keyval’s @code{\\define@@key}, to define keys for use by @code{kvsetkeys}."
- msgstr ""
- #: gnu/packages/tex.scm:8977
- msgid "Key value parser with default handler support"
- msgstr ""
- #: gnu/packages/tex.scm:8979
- msgid ""
- "This package provides @code{\\kvsetkeys}, a variant of @code{\\setkeys}\n"
- "from the @code{keyval} package. Users can specify a handler that deals with\n"
- "unknown options. Active commas and equal signs may be used, and only one\n"
- "level of curly braces are removed from the values."
- msgstr ""
- #: gnu/packages/tex.scm:9012
- msgid "Grab items in lists using user-specified separation character"
- msgstr ""
- #: gnu/packages/tex.scm:9014
- msgid ""
- "This package allows one to capture all the items of a list, for which\n"
- "the parsing character has been selected by the user, and to access any of\n"
- "these items with a simple syntax."
- msgstr ""
- #: gnu/packages/tex.scm:9028
- msgid "LaTeX kernel commands extracted for general use"
- msgstr ""
- #: gnu/packages/tex.scm:9030
- msgid ""
- "This package exports some utility macros from the LaTeX kernel into\n"
- "a separate namespace and also makes them available for other formats such\n"
- "as plain TeX."
- msgstr ""
- #: gnu/packages/tex.scm:9044
- msgid "Use escape features from pdfTeX with plain TeX"
- msgstr ""
- #: gnu/packages/tex.scm:9046
- msgid ""
- "This package implements pdfTeX's escape features (@code{\\pdfescapehex},\n"
- "@code{\\pdfunescapehex}, @code{\\pdfescapename}, @code{\\pdfescapestring})\n"
- "using TeX or e-TeX."
- msgstr ""
- #: gnu/packages/tex.scm:9063
- msgid "Unlimited unique counter"
- msgstr ""
- #: gnu/packages/tex.scm:9065
- msgid ""
- "This package provides a kind of counter that provides unique number\n"
- "values. Several counters can be created with different names. The numeric\n"
- "values are not limited."
- msgstr ""
- #: gnu/packages/tex.scm:9099
- msgid "Read, store and recall array-formatted data"
- msgstr ""
- #: gnu/packages/tex.scm:9101
- msgid ""
- "This package allows the user to input formatted data into elements of a\n"
- "2-D or 3-D array and to recall that data at will by individual cell number.\n"
- "The data can be but need not be numerical in nature. It can be, for example,\n"
- "formatted text."
- msgstr ""
- #: gnu/packages/tex.scm:9136
- msgid "Deposit verbatim text in a box"
- msgstr ""
- #: gnu/packages/tex.scm:9138
- msgid ""
- "The package provides a @code{verbbox} environment to place its contents\n"
- "into a globally available box, or into a box specified by the user. The\n"
- "global box may then be used in a variety of situations (for example, providing\n"
- "a replica of the @code{boxedverbatim} environment itself). A valuable use is\n"
- "in places where the standard @code{verbatim} environment (which is based on a\n"
- "@code{trivlist}) may not appear."
- msgstr ""
- #: gnu/packages/tex.scm:9173
- msgid "Verbatim phrases and listings in LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:9175
- msgid ""
- "Examplep provides sophisticated features for typesetting verbatim source\n"
- "code listings, including the display of the source code and its compiled LaTeX\n"
- "or METAPOST output side-by-side, with automatic width detection and enabled\n"
- "page breaks (in the source), without the need for specifying the source twice.\n"
- "Special care is taken that section, page and footnote numbers do not interfere\n"
- "with the main document. For typesetting short verbatim phrases, a replacement\n"
- "for the @code{\\verb} command is also provided in the package, which can be\n"
- "used inside tables and moving arguments such as footnotes and section\n"
- "titles."
- msgstr ""
- #: gnu/packages/tex.scm:9198
- msgid "Generate Unicode characters from accented glyphs"
- msgstr ""
- #: gnu/packages/tex.scm:9200
- msgid ""
- "The package supports XeTeX's (and other putative future similar engines')\n"
- "need for Unicode characters, in a similar way to what the fontenc does for\n"
- "8-bit (and the like) fonts: convert accent-glyph sequence to a single Unicode\n"
- "character for output. The package also covers glyphs specified by\n"
- "packages (such as @code{tipa}) which define many commands for single text\n"
- "glyphs."
- msgstr ""
- #: gnu/packages/tex.scm:9232
- msgid "Flexible diagramming macros"
- msgstr ""
- #: gnu/packages/tex.scm:9233
- msgid ""
- "This is a package for typesetting a variety of graphs and\n"
- "diagrams with TeX. Xy-pic works with most formats (including LaTeX,\n"
- "AMS-LaTeX, AMS-TeX, and plain TeX). The distribution includes Michael Barr's\n"
- "@code{diag} package, which was previously distributed stand-alone."
- msgstr ""
- #: gnu/packages/tex.scm:9271
- msgid "Process bibliographies for LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:9273
- msgid ""
- "BibTeX allows the user to store his citation data in generic form, while\n"
- "printing citations in a document in the form specified by a BibTeX style, to\n"
- "be specified in the document itself (one often needs a LaTeX citation-style\n"
- "package, such as @command{natbib} as well)."
- msgstr ""
- #: gnu/packages/tex.scm:9295
- msgid "Charter fonts for TeX"
- msgstr ""
- #: gnu/packages/tex.scm:9296
- msgid ""
- "This package provides a copy of the Charter Type-1 fonts\n"
- "which Bitstream contributed to the X consortium, renamed for use with TeX.\n"
- "Support for use with LaTeX is available in @code{freenfss}, part of\n"
- "@command{psnfss}."
- msgstr ""
- #: gnu/packages/tex.scm:9391
- msgid "Full featured, parameter driven macro package for TeX"
- msgstr ""
- #: gnu/packages/tex.scm:9392
- msgid ""
- "ConTeXt is a full featured, parameter driven macro package,\n"
- "which fully supports advanced interactive documents. See the ConTeXt garden\n"
- "for a wealth of support information."
- msgstr ""
- #: gnu/packages/tex.scm:9416
- msgid "LaTeX class for producing presentations and slides"
- msgstr ""
- #: gnu/packages/tex.scm:9417
- msgid ""
- "The beamer LaTeX class can be used for producing slides.\n"
- "The class works in both PostScript and direct PDF output modes, using the\n"
- "@code{pgf} graphics system for visual effects. Content is created in the\n"
- "@code{frame} environment, and each frame can be made up of a number of slides\n"
- "using a simple notation for specifying material to appear on each slide within\n"
- "a frame. Short versions of title, authors, institute can also be specified as\n"
- "optional parameters. Whole frame graphics are supported by plain frames. The\n"
- "class supports @code{figure} and @code{table} environments, transparency\n"
- "effects, varying slide transitions and animations."
- msgstr ""
- #: gnu/packages/tex.scm:9447
- msgid "Include eXtensible Metadata Platform data in pdfLaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:9449
- msgid ""
- "The XMP (eXtensible Metadata platform) is a framework to add metadata to\n"
- "digital material to enhance the workflow in publication. The essence is that\n"
- "the metadata is stored in an XML file, and this XML stream is then embedded in\n"
- "the file to which it applies."
- msgstr ""
- #: gnu/packages/tex.scm:9486
- msgid "PDF/X and PDF/A support for pdfTeX, LuaTeX and XeTeX"
- msgstr ""
- #: gnu/packages/tex.scm:9488
- msgid ""
- "This package helps LaTeX users to create PDF/X, PDF/A and other\n"
- "standards-compliant PDF documents with pdfTeX, LuaTeX and XeTeX."
- msgstr ""
- #: gnu/packages/tex.scm:9522
- msgid "Macros for documentation of LaTeX classes and packages"
- msgstr ""
- #: gnu/packages/tex.scm:9523
- msgid ""
- "The package provides macros and environments to document\n"
- "LaTeX packages and classes. It is an (as yet unfinished) alternative to the\n"
- "@code{ltxdoc} class and the @code{doc} or @code{xdoc} packages. The aim is to\n"
- "provide a different layout and more modern styles (using the @code{xcolor},\n"
- "@code{hyperref} packages, etc.) This is an alpha release, and should probably\n"
- "not (yet) be used with other packages, since the implementation might\n"
- "change."
- msgstr ""
- #: gnu/packages/tex.scm:9550
- msgid "PostScript macros for TeX"
- msgstr ""
- #: gnu/packages/tex.scm:9551
- msgid ""
- "PSTricks offers an extensive collection of macros for\n"
- "generating PostScript that is usable with most TeX macro formats, including\n"
- "Plain TeX, LaTeX, AMS-TeX, and AMS-LaTeX. Included are macros for colour,\n"
- "graphics, pie charts, rotation, trees and overlays. It has many special\n"
- "features, including a wide variety of graphics (picture drawing) macros, with\n"
- "a flexible interface and with colour support. There are macros for colouring\n"
- "or shading the cells of tables."
- msgstr ""
- #: gnu/packages/tex.scm:9575
- msgid "Text and character manipulation in PSTricks"
- msgstr ""
- #: gnu/packages/tex.scm:9576
- msgid ""
- "Pst-text is a PSTricks based package for plotting text along\n"
- "a different path and manipulating characters. It includes the functionality\n"
- "of the old package @code{pst-char}."
- msgstr ""
- #: gnu/packages/tex.scm:9600
- msgid "Notes in the margin"
- msgstr ""
- #: gnu/packages/tex.scm:9601
- msgid ""
- "This package provides the command @code{\\marginnote} that\n"
- "may be used instead of @code{\\marginpar} at almost every place where\n"
- "@code{\\marginpar} cannot be used, e.g., inside floats, footnotes, or in\n"
- "frames made with the @code{framed} package."
- msgstr ""
- #: gnu/packages/tex.scm:9618
- msgid "Determine the currently used TeX engine"
- msgstr ""
- #: gnu/packages/tex.scm:9619
- msgid ""
- "This package, which works both for Plain TeX and for\n"
- "LaTeX, defines the @code{\\ifPDFTeX}, @code{\\ifXeTeX}, and @code{\\ifLuaTeX}\n"
- "conditionals for testing which engine is being used for typesetting. The\n"
- "package also provides the @code{\\RequirePDFTeX}, @code{\\RequireXeTeX}, and\n"
- "@code{\\RequireLuaTeX} commands which throw an error if pdfTeX, XeTeX or\n"
- "LuaTeX (respectively) is not the engine in use."
- msgstr ""
- #: gnu/packages/tex.scm:9663
- msgid "Flexible LaTeX tabulars"
- msgstr ""
- #: gnu/packages/tex.scm:9665
- msgid ""
- "The package provides an environment, tabu, which will make any sort of\n"
- "tabular, and an environment longtabu which provides the facilities of tabu in\n"
- "a modified longtable environment. The package requires array, xcolor for\n"
- "coloured rules in tables, and colortbl for coloured cells. The longtabu\n"
- "environment further requires that longtable be loaded. The package itself\n"
- "does not load any of these packages for the user. The tabu environment may be\n"
- "used in place of @code{tabular}, @code{tabular*} and @code{tabularx}\n"
- "environments, as well as the @code{array} environment in maths mode."
- msgstr ""
- #: gnu/packages/tex.scm:9696
- msgid ""
- "This package provides a collection of simple tools that\n"
- "are part of the LaTeX required tools distribution, comprising the packages:\n"
- "@code{afterpage}, @code{array}, @code{bm}, @code{calc}, @code{dcolumn},\n"
- "@code{delarray}, @code{enumerate}, @code{fileerr}, @code{fontsmpl},\n"
- "@code{ftnright}, @code{hhline}, @code{indentfirst}, @code{layout},\n"
- "@code{longtable}, @code{multicol}, @code{rawfonts}, @code{showkeys},\n"
- "@code{somedefs}, @code{tabularx}, @code{theorem}, @code{trace},\n"
- "@code{varioref}, @code{verbatim}, @code{xr}, and @code{xspace}."
- msgstr ""
- #: gnu/packages/tex.scm:9780
- msgid "Extension of the keyval package"
- msgstr ""
- #: gnu/packages/tex.scm:9782
- msgid ""
- "This package is an extension of the keyval package and offers additional\n"
- "macros for setting keys and declaring and setting class or package options.\n"
- "The package allows the programmer to specify a prefix to the name of the\n"
- "macros it defines for keys, and to define families of key definitions; these\n"
- "all help use in documents where several packages define their own sets of\n"
- "keys."
- msgstr ""
- #: gnu/packages/tex.scm:9809
- msgid "Compile TeX pictures stand-alone or as part of a document"
- msgstr ""
- #: gnu/packages/tex.scm:9810
- msgid ""
- "A class and package is provided which allows TeX pictures or\n"
- "other TeX code to be compiled standalone or as part of a main document.\n"
- "Special support for pictures with beamer overlays is also provided. The\n"
- "package is used in the main document and skips extra preambles in sub-files.\n"
- "The class may be used to simplify the preamble in sub-files. By default the\n"
- "@code{preview} package is used to display the typeset code without margins.\n"
- "The behaviour in standalone mode may adjusted using a configuration file\n"
- "@code{standalone.cfg} to redefine the standalone environment."
- msgstr ""
- #: gnu/packages/tex.scm:9841
- msgid "Comprehensive SI units package"
- msgstr ""
- #: gnu/packages/tex.scm:9843
- msgid ""
- "Typesetting values with units requires care to ensure that the combined\n"
- "mathematical meaning of the value plus unit combination is clear. In\n"
- "particular, the SI units system lays down a consistent set of units with rules\n"
- "on how they are to be used. However, different countries and publishers have\n"
- "differing conventions on the exact appearance of numbers (and units). A\n"
- "number of LaTeX packages have been developed to provide consistent application\n"
- "of the various rules. The @code{siunitx} package takes the best from the\n"
- "existing packages, and adds new features and a consistent interface. A number\n"
- "of new ideas have been incorporated, to fill gaps in the existing provision.\n"
- "The package also provides backward-compatibility with @code{SIunits},\n"
- "@code{sistyle}, @code{unitsdef} and @code{units}. The aim is to have one\n"
- "package to handle all of the possible unit-related needs of LaTeX users."
- msgstr ""
- #: gnu/packages/tex.scm:9872
- msgid "Publication quality tables in LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:9874
- msgid ""
- "This package enhances the quality of tables in LaTeX, providing extra\n"
- "commands as well as behind-the-scenes optimisation. Guidelines are given as\n"
- "to what constitutes a good table in this context. The package offers\n"
- "@code{longtable} compatibility."
- msgstr ""
- #: gnu/packages/tex.scm:9893
- msgid "Context sensitive quotation facilities"
- msgstr ""
- #: gnu/packages/tex.scm:9894
- msgid ""
- "This package provides advanced facilities for inline and\n"
- "display quotations. It is designed for a wide range of tasks ranging from the\n"
- "most simple applications to the more complex demands of formal quotations.\n"
- "The facilities include commands, environments, and user-definable 'smart\n"
- "quotes' which dynamically adjust to their context. Quotation marks are\n"
- "switched automatically if quotations are nested and they can be adjusted to\n"
- "the current language if the babel package is available. There are additional\n"
- "facilities designed to cope with the more specific demands of academic\n"
- "writing, especially in the humanities and the social sciences. All quote\n"
- "styles as well as the optional active quotes are freely configurable."
- msgstr ""
- #: gnu/packages/tex.scm:9919
- msgid "Support for automation of the LaTeX workflow"
- msgstr ""
- #: gnu/packages/tex.scm:9920
- msgid ""
- "The package helps to automate a typical LaTeX\n"
- "workflow that involves running LaTeX several times and running tools\n"
- "such as BibTeX or makeindex. It will log requests like \"please rerun\n"
- "LaTeX\" or \"please run BibTeX on file X\" to an external file in a\n"
- "machine-readable format. Compiler scripts and integrated LaTeX\n"
- "editing environments may parse this file to determine the next steps\n"
- "in the workflow. In sum, the package will do two things:\n"
- "\n"
- "@enumerate\n"
- "@item\n"
- "enable package authors to use LaTeX commands to issue requests, and\n"
- "\n"
- "@item\n"
- "collect all requests from all packages and write them to an external\n"
- "XML file.\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/tex.scm:9951
- msgid "Sophisticated bibliographies in LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:9952
- msgid ""
- "BibLaTeX is a complete reimplementation of the\n"
- "bibliographic facilities provided by LaTeX. Formatting of the\n"
- "bibliography is entirely controlled by LaTeX macros, facilitating the\n"
- "design of new bibliography and citation styles. BibLaTeX uses its own\n"
- "data backend program \"biber\" to read and process the bibliographic\n"
- "data. With biber, the range of features provided by biblatex\n"
- "includes:\n"
- "\n"
- "@enumerate\n"
- "@item\n"
- "full unicode support,\n"
- "\n"
- "@item\n"
- "customisable bibliography labels,\n"
- "\n"
- "@item\n"
- "multiple bibliographies in the same document, and\n"
- "\n"
- "@item\n"
- "subdivided bibliographies, such as bibliographies per chapter or\n"
- "section.\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/tex.scm:9990
- msgid "BibLaTeX citation and reference style for APA"
- msgstr ""
- #: gnu/packages/tex.scm:9992
- msgid ""
- "This is a fairly complete BibLaTeX style (citations and references) for\n"
- "@acronym{APA, American Psychological Association} publications. It implements\n"
- "and automates most of the guidelines in the APA 7th edition style guide for\n"
- "citations and references."
- msgstr ""
- #: gnu/packages/tex.scm:10011
- msgid "Marking things to do in a LaTeX document"
- msgstr ""
- #: gnu/packages/tex.scm:10012
- msgid ""
- "The @code{todonotes} package lets the user mark\n"
- "things to do later, in a simple and visually appealing way. The\n"
- "package takes several options to enable customization and finetuning\n"
- "of the visual appearance."
- msgstr ""
- #: gnu/packages/tex.scm:10029
- msgid "Typeset physical units and fractions"
- msgstr ""
- #: gnu/packages/tex.scm:10030
- msgid ""
- "@code{units} is a package for typesetting physical\n"
- "units in a standard-looking way. The package is based upon\n"
- "@code{nicefrac}, a package for typing fractions. @code{nicefrac} is\n"
- "included in the @code{units} bundle."
- msgstr ""
- #: gnu/packages/tex.scm:10047
- msgid "Subliminal refinements towards typographical perfection"
- msgstr ""
- #: gnu/packages/tex.scm:10048
- msgid ""
- "@code{microtype} provides a LaTeX interface to the\n"
- "micro-typographic extensions that were introduced by pdfTeX and have\n"
- "since propagated to XeTeX and LuaTeX: most prominently character\n"
- "protrusion and font expansion, the adjustment of kerning and interword\n"
- "spacing, hyphenatable letterspacing and the possibility to disable all\n"
- "or selected ligatures. These features may be applied to customisable\n"
- "sets of fonts. All micro-typographic aspects of the fonts can be\n"
- "configured in a straight-forward and flexible way. Settings for\n"
- "various fonts are provided. An alternative package\n"
- "@code{letterspace}, which also works with plain TeX, is included in\n"
- "the bundle."
- msgstr ""
- #: gnu/packages/tex.scm:10086
- msgid "Highlight source code in LaTeX documents"
- msgstr ""
- #: gnu/packages/tex.scm:10087
- msgid ""
- "This package facilitates expressive syntax highlighting in\n"
- "LaTeX using the Pygments library. This package also provides options to\n"
- "customize the highlighted source code output using fancyvrb and fvextra."
- msgstr ""
- #: gnu/packages/tex.scm:10103
- msgid "Customising captions in floating environments"
- msgstr ""
- #: gnu/packages/tex.scm:10104
- msgid ""
- "The @code{caption} package provides many ways to\n"
- "customise the captions in floating environments like figure and table.\n"
- "Facilities include rotating captions, sideways captions and continued\n"
- "captions (for tables or figures that come in several parts). A list\n"
- "of compatibility notes, for other packages, is provided in the\n"
- "documentation. The package also provides the \"caption outside\n"
- "float\" facility, in the same way that simpler packages like\n"
- "@code{capt-ofcapt-of} do. The package supersedes @code{caption2}.\n"
- "Packages @code{bicaption}, @code{ltcaption} and @code{subcaption} are\n"
- "included in the bundle."
- msgstr ""
- #: gnu/packages/tex.scm:10133
- msgid ""
- "This package provides a drop-in replacement for the\n"
- "Symbol font from Adobe's basic set."
- msgstr ""
- #: gnu/packages/tex.scm:10150
- msgid "Fonts to typeset mathematics to match Palatino"
- msgstr ""
- #: gnu/packages/tex.scm:10151
- msgid ""
- "The Pazo Math fonts are a family of PostScript fonts\n"
- "suitable for typesetting mathematics in combination with the Palatino\n"
- "family of text fonts. The Pazo Math family is made up of five fonts\n"
- "provided in Adobe Type 1 format. These contain glyphs that are\n"
- "usually not available in Palatino and for which Computer Modern looks\n"
- "odd when combined with Palatino. These glyphs include the uppercase\n"
- "Greek alphabet in upright and slanted shapes, the lowercase Greek\n"
- "alphabet in slanted shape, several mathematical glyphs and the\n"
- "uppercase letters commonly used to represent various number sets.\n"
- "LaTeX macro support is provided in package @code{psnfss}."
- msgstr ""
- #: gnu/packages/tex.scm:10175
- msgid "SC and OsF fonts for URW Palladio L"
- msgstr ""
- #: gnu/packages/tex.scm:10176
- msgid ""
- "The FPL Fonts provide a set of SC/OsF fonts for URW\n"
- "Palladio L which are compatible with the Palatino SC/OsF fonts from\n"
- "Adobe. LaTeX use is enabled by the mathpazo package, which is part of\n"
- "the @code{psnfss} distribution."
- msgstr ""
- #: gnu/packages/tex.scm:10199
- msgid "Fonts and LaTeX support files for Arev Sans"
- msgstr ""
- #: gnu/packages/tex.scm:10200
- msgid ""
- "The @code{arev} package provides type 1 fonts,\n"
- "virtual fonts and LaTeX packages for using Arev Sans in both text and\n"
- "mathematics. Arev Sans is a derivative of Bitstream Vera Sans, adding\n"
- "support for Greek and Cyrillic characters and a few variant letters\n"
- "appropriate for mathematics. The font is primarily used in LaTeX for\n"
- "presentations, particularly when using a computer projector. Arev\n"
- "Sans has large x-height, \"open letters\", wide spacing and thick\n"
- "stems. The style is very similar to the SliTeX font lcmss but\n"
- "heavier. Arev is one of a very small number of sans-font mathematics\n"
- "support packages. Others are cmbright, hvmath and kerkis."
- msgstr ""
- #: gnu/packages/tex.scm:10230
- msgid "Mathematical fonts to fit with particular text fonts"
- msgstr ""
- #: gnu/packages/tex.scm:10231
- msgid ""
- "The Math Design project offers free mathematical\n"
- "fonts that match with existing text fonts. To date, three free font\n"
- "families are available: Adobe Utopia, URW Garamond and Bitstream\n"
- "Charter. Mathdesign covers the whole LaTeX glyph set including AMS\n"
- "symbols. Both roman and bold versions of these symbols can be used.\n"
- "Moreover, there is a choice between three greek fonts (two of them\n"
- "created by the Greek Font Society)."
- msgstr ""
- #: gnu/packages/tex.scm:10255
- msgid "Bera fonts"
- msgstr ""
- #: gnu/packages/tex.scm:10256
- msgid ""
- "The @code{bera} package contains the Bera Type 1\n"
- "fonts and files to use the fonts with LaTeX. Bera is a set of three\n"
- "font families: Bera Serif (a slab-serif Roman), Bera Sans (a Frutiger\n"
- "descendant) and Bera Mono (monospaced/typewriter). The Bera family is\n"
- "a repackaging, for use with TeX, of the Bitstream Vera family."
- msgstr ""
- #: gnu/packages/tex.scm:10278
- msgid "Utopia fonts for LaTeX documents"
- msgstr ""
- #: gnu/packages/tex.scm:10279
- msgid ""
- "Fourier-GUTenberg is a LaTeX typesetting system\n"
- "which uses Adobe Utopia as its standard base font. Fourier-GUTenberg\n"
- "provides all complementary typefaces needed to allow Utopia based TeX\n"
- "typesetting including an extensive mathematics set and several other\n"
- "symbols. The system is absolutely stand-alone; apart from Utopia and\n"
- "Fourier no other typefaces are required. Utopia is a registered\n"
- "trademark of Adobe Systems Incorporated."
- msgstr ""
- #: gnu/packages/tex.scm:10301
- msgid "Adobe Utopia fonts"
- msgstr ""
- #: gnu/packages/tex.scm:10302
- msgid ""
- "The Adobe Standard Encoding set of the Utopia font\n"
- "family, as contributed to the X Consortium. The set comprises upright\n"
- "and italic shapes in medium and bold weights. Macro support and\n"
- "matching maths fonts are provided by the @code{fourier} and\n"
- "@code{mathdesign} font packages."
- msgstr ""
- #: gnu/packages/tex.scm:10325
- msgid "Additional font axes for LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:10326
- msgid ""
- "The @code{fontaxes} package adds several new font\n"
- "axes on top of LaTeX's New Font Selection Scheme (NFSS). In\n"
- "particular, it splits the shape axis into a primary and a secondary\n"
- "shape axis and it adds three new axes to deal with the different\n"
- "figure versions offered by many professional fonts."
- msgstr ""
- #: gnu/packages/tex.scm:10348
- msgid "Bundle of modules for preprints"
- msgstr ""
- #: gnu/packages/tex.scm:10349
- msgid ""
- "The bundle comprises: @code{authblk}, which permits\n"
- "footnote style author/affiliation input in the @command{\\author} command,\n"
- "@code{balance}, to balance the end of @command{\\twocolumn} pages,\n"
- "@code{figcaps}, to send figure captions, etc., to end document,\n"
- "@code{fullpage}, to set narrow page margins and set a fixed page style, and\n"
- "@code{sublabel}, which permits counters to be subnumbered."
- msgstr ""
- #: gnu/packages/tex.scm:10367
- msgid "Support for multiple-weight font packages"
- msgstr ""
- #: gnu/packages/tex.scm:10368
- msgid ""
- "Many font families available for use with LaTeX are\n"
- "available at multiple weights. Many Type 1-oriented support packages\n"
- "for such fonts re-define the standard @code{\\mddefault} or\n"
- "@code{\\bfdefault} macros. This can create difficulties if the weight\n"
- "desired for one font family is not available for another font family,\n"
- "or if it differs from the weight desired for another font family. The\n"
- "@code{mweights} package provides a solution to these difficulties."
- msgstr ""
- #: gnu/packages/tex.scm:10393
- msgid "Humanist Sans Serif font with LaTeX support"
- msgstr ""
- #: gnu/packages/tex.scm:10394
- msgid ""
- "Cabin is a humanist sans with four weights, true\n"
- "italics and small capitals. According to its designer, Pablo\n"
- "Impallari, Cabin was inspired by the typefaces of Edward Johnston and\n"
- "Eric Gill. Cabin incorporates modern proportions, optical adjustments\n"
- "and some elements of the geometric sans. @code{cabin.sty} supports\n"
- "use of the font under LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX. It uses\n"
- "the @code{mweights} package to manage the user's view of all those\n"
- "font weights. An @code{sfdefault} option is provided to enable Cabin\n"
- "as the default text font. The @code{fontaxes} package is required for\n"
- "use with [pdf]LaTeX."
- msgstr ""
- #: gnu/packages/tex.scm:10424
- msgid "Repackaging of the TX fonts with improved metrics"
- msgstr ""
- #: gnu/packages/tex.scm:10425
- msgid ""
- "The @code{newtx} bundle splits\n"
- "@code{txfonts.sty} (from the TX fonts distribution) into two\n"
- "independent packages, @code{newtxtext.sty} and @code{newtxmath.sty},\n"
- "each with fixes and enhancements. @code{newtxmath}'s metrics have\n"
- "been re-evaluated to provide a less tight appearance and to provide a\n"
- "@code{libertine} option that substitutes Libertine italic and Greek\n"
- "letters for the existing math italic and Greek glyphs, making a\n"
- "mathematics package that matches Libertine text quite well."
- msgstr ""
- #: gnu/packages/tex.scm:10452
- msgid "Extension of the Bitstream Charter fonts"
- msgstr ""
- #: gnu/packages/tex.scm:10453
- msgid ""
- "@code{xcharter} repackages Bitstream Charter with an\n"
- "extended set of features. The extension provides small caps, oldstyle\n"
- "figures and superior figures in all four styles, accompanied by LaTeX\n"
- "font support files. The fonts themselves are provided in both Adobe\n"
- "Type 1 and OTF formats, with supporting files as necessary."
- msgstr ""
- #: gnu/packages/tex.scm:10476
- msgid "Support for LY1 LaTeX encoding"
- msgstr ""
- #: gnu/packages/tex.scm:10477
- msgid ""
- "The legacy @emph{texnansi} (TeX and ANSI) encoding\n"
- "is known in the LaTeX scheme of things as @emph{LY1} encoding. The\n"
- "@code{ly1} bundle includes metrics and LaTeX macros to use the three\n"
- "basic Adobe Type 1 fonts (Times, Helvetica and Courier) in LaTeX using\n"
- "LY1 encoding."
- msgstr ""
- #: gnu/packages/tex.scm:10505
- msgid "Control sectional headers"
- msgstr ""
- #: gnu/packages/tex.scm:10506
- msgid ""
- "This is a LaTeX2ε package to help change the style of any or\n"
- "all of LaTeX's sectional headers in the article, book, or report classes.\n"
- "Examples include the addition of rules above or below a section title."
- msgstr ""
- #: gnu/packages/tex.scm:10531
- msgid "Increase the number of simultaneous LaTeX floats"
- msgstr ""
- #: gnu/packages/tex.scm:10532
- msgid ""
- "LaTeX can, by default, only cope with 18 outstanding floats;\n"
- "any more, and you get the error “too many unprocessed floats”. This package\n"
- "releases the limit; TeX itself imposes limits (which are independent of the\n"
- "help offered by e-TeX).\n"
- "\n"
- "However, if your floats can’t be placed anywhere, extending the number of\n"
- "floats merely delays the arrival of the inevitable error message."
- msgstr ""
- #: gnu/packages/tex.scm:10564
- msgid "If-then-else command for processing potentially empty arguments"
- msgstr ""
- #: gnu/packages/tex.scm:10565
- msgid ""
- "This package provides a command for the LaTeX programmer for\n"
- "testing whether an argument is empty."
- msgstr ""
- #: gnu/packages/tex.scm:10591
- msgid "Notes at end of document"
- msgstr ""
- #: gnu/packages/tex.scm:10592
- msgid ""
- "The pagenote package provides tagged notes on a separate\n"
- "page (also known as ‘end notes’)."
- msgstr ""
- #: gnu/packages/tex.scm:10619
- msgid "Control typesetting of the \\maketitle command"
- msgstr ""
- #: gnu/packages/tex.scm:10620
- msgid ""
- "The @code{titling} package provides control over the\n"
- "typesetting of the @code{\\maketitle} command and @code{\\thanks} commands,\n"
- "and makes the \title, @code{\\author} and @code{\\date} information\n"
- "permanently available. Multiple titles are allowed in a single document. New\n"
- "titling elements can be added and a @code{titlepage} title can be centered on\n"
- "a physical page."
- msgstr ""
- #: gnu/packages/tex.scm:10649
- msgid "Determine if the current page is odd or even"
- msgstr ""
- #: gnu/packages/tex.scm:10650
- msgid ""
- "This package provides an @code{\\ifoddpage} conditional to\n"
- "determine if the current page is odd or even. The macro @code{\\checkoddpage}\n"
- "must be used directly before to check the page number using a label. Two\n"
- "compiler runs are therefore required to achieve correct results. In addition,\n"
- "the conditional @code{\\ifoddpageoronside} is provided which is also true in\n"
- "@code{oneside} mode where all pages use the odd page layout."
- msgstr ""
- #: gnu/packages/tex.scm:10679
- msgid "Storing information for reuse"
- msgstr ""
- #: gnu/packages/tex.scm:10680
- msgid ""
- "The package provides \"store boxes\" whose user interface\n"
- "matches that of normal LaTeX \"save boxes\", except that the content of a\n"
- "store box appears at most once in the output PDF file, however often it is\n"
- "used. The present version of the package supports pdfLaTeX and LuaLaTeX; when\n"
- "DVI is output, store boxes behave the same as save boxes."
- msgstr ""
- #: gnu/packages/tex.scm:10708
- msgid "Collect and process macro arguments as boxes"
- msgstr ""
- #: gnu/packages/tex.scm:10709
- msgid ""
- "The package provides macros to collect and process a macro\n"
- "argument (i.e., something which looks like a macro argument) as a horizontal\n"
- "box rather than as a real macro argument. The \"arguments\" are stored as if\n"
- "they had been saved by @code{\\savebox} or by the @code{lrbox} environment.\n"
- "Grouping tokens @code{\\bgroup} and @code{\\egroup} may be used, which allows\n"
- "the user to have the beginning and end of a group in different macro\n"
- "invocations, or to place them in the begin and end code of an environment.\n"
- "Arguments may contain verbatim material or other special use of characters.\n"
- "The macros were designed for use within other macros."
- msgstr ""
- #: gnu/packages/tex.scm:10740
- msgid "Manipulate the graphics package's list of extensions"
- msgstr ""
- #: gnu/packages/tex.scm:10741
- msgid ""
- "This package provides macros for adding to, and reordering\n"
- "the list of graphics file extensions recognised by package graphics."
- msgstr ""
- #: gnu/packages/tex.scm:10774
- msgid "Graphics package-alike macros for “general” boxes"
- msgstr ""
- #: gnu/packages/tex.scm:10775
- msgid ""
- "The package provides several macros to adjust boxed\n"
- "content. One purpose is to supplement the standard @code{graphics} package,\n"
- "which defines the macros @code{\\resizebox}, @code{\\scalebox} and\n"
- "@code{\\rotatebox} , with the macros @code{\\trimbox} and @code{\\clipbox}.\n"
- "The main feature is the general @code{\\adjustbox} macro which extends the\n"
- "@code{key=value} interface of @code{\\includegraphics} from the\n"
- "@code{graphics} package and applies it to general text content. Additional\n"
- "provided box macros are @code{\\lapbox}, @code{\\marginbox},\n"
- "@code{\\minsizebox}, @code{\\maxsizebox} and @code{\\phantombox}."
- msgstr ""
- #: gnu/packages/tex.scm:10832
- msgid "QR codes without external tools"
- msgstr ""
- #: gnu/packages/tex.scm:10833
- msgid ""
- "This package creates @acronym{QR,Quick Response} codes for\n"
- "LaTeX documents without depending on external graphics packages. It supports\n"
- "generating codes of different sizes and with different error correction\n"
- "levels. All functionality is provided by the single @code{\\qrcode} command."
- msgstr ""
- #: gnu/packages/tex.scm:10853
- msgid "Colored boxes, for LaTeX examples and theorems, etc"
- msgstr ""
- #: gnu/packages/tex.scm:10854
- msgid ""
- "This package provides an environment for colored and\n"
- "framed text boxes with a heading line. Optionally, such a box may be split in\n"
- "an upper and a lower part; thus the package may be used for the setting of\n"
- "LaTeX examples where one part of the box displays the source code and the\n"
- "other part shows the output. Another common use case is the setting of\n"
- "theorems. The package supports saving and reuse of source code and text\n"
- "parts."
- msgstr ""
- #: gnu/packages/tex.scm:10883 gnu/packages/tex.scm:10912
- msgid "Formal proofs in the style of sequent calculus"
- msgstr ""
- #: gnu/packages/tex.scm:10885
- msgid ""
- "This package provides commands to typeset proof trees in the style of\n"
- "sequent calculus and related systems. The commands allow for writing\n"
- "inferences with any number of premises and alignment of successive formulas on\n"
- "an arbitrary point. Various options allow complete control over spacing,\n"
- "styles of inference rules, placement of labels, etc."
- msgstr ""
- #: gnu/packages/tex.scm:10914
- msgid ""
- "This package provides commands to typeset proof trees in the style of\n"
- "sequent calculus and related systems."
- msgstr ""
- #: gnu/packages/tex.scm:10933
- msgid "METAFONT and macros for Euro sign"
- msgstr ""
- #: gnu/packages/tex.scm:10934
- msgid ""
- "This package provides the European currency symbol for the\n"
- "Euro implemented in METAFONT, using the official European Commission\n"
- "dimensions, and providing several shapes (normal, slanted, bold, outline).\n"
- "The package also includes a LaTeX package which defines the macro,\n"
- "pre-compiled font files, and documentation."
- msgstr ""
- #: gnu/packages/tex.scm:10963
- msgid "Convert numbers into binary, octal and hexadecimal"
- msgstr ""
- #: gnu/packages/tex.scm:10964
- msgid ""
- "The @code{kastrup} package provides the\n"
- "@emph{binhex.tex} file. This file provides expandable macros for both\n"
- "fixed-width and minimum-width numbers to bases 2, 4, 8 and 16. All\n"
- "constructs TeX accepts as arguments to its @code{\\number} primitive\n"
- "are valid as arguments for the macros. The package may be used under\n"
- "LaTeX and plain TeX."
- msgstr ""
- #: gnu/packages/tex.scm:10982
- msgid "Internationalisation of LaTeX2e packages"
- msgstr ""
- #: gnu/packages/tex.scm:10986
- msgid ""
- "This package (once part of the @code{exsheets} package), provides a\n"
- "framework for providing multilingual features to a LaTeX package. The package\n"
- "has its own basic dictionaries for English, Brazilian, Catalan, Dutch, French,\n"
- "German, Polish and Spanish. It aims to use translation material for English,\n"
- "Dutch, French, German, Italian, Spanish, Catalan, Turkish, Croatian, Hungarian,\n"
- "Danish and Portuguese from babel or polyglossia if either is in use in the\n"
- "document."
- msgstr ""
- #: gnu/packages/tex.scm:11005
- msgid "Easy translation of strings in LaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:11007
- msgid ""
- "This LaTeX package provides a flexible mechanism for translating\n"
- "individual words into different languages. For example, it can be used to\n"
- "translate a word like \"figure\" into, say, the German word \"Abbildung\".\n"
- "Such a translation mechanism is useful when the author of some package would\n"
- "like to localize the package such that texts are correctly translated into the\n"
- "language preferred by the user. This package is not intended to be used to\n"
- "automatically translate more than a few words."
- msgstr ""
- #: gnu/packages/tex.scm:11026
- msgid "Absolute positioning of text on the LaTeX page"
- msgstr ""
- #: gnu/packages/tex.scm:11028
- msgid ""
- "This package facilitates placing boxes at absolute positions on the\n"
- "LaTeX page. There are several reasons why this might be useful, but the main\n"
- "one (or at least my motivating one) is to help produce a large-format\n"
- "conference poster.\n"
- "\n"
- "This package provides a single environment, plus a starred variant, which\n"
- "contains the text (or graphics, or table, or whatever) which is to be placed\n"
- "on the page, and which specifies where it is to be placed. The environment is\n"
- "accompanied by various configuration commands."
- msgstr ""
- #: gnu/packages/tex.scm:11071
- msgid "Unicode mathematics support for XeTeX and LuaTeX"
- msgstr ""
- #: gnu/packages/tex.scm:11072
- msgid ""
- "This package will provide a complete implementation of\n"
- "Unicode maths for XeLaTeX and LuaLaTeX. Unicode maths is currently supported\n"
- "by the following fonts:\n"
- "@itemize\n"
- "@item Latin Modern Math\n"
- "@item TeX Gyre Bonum Math\n"
- "@item TeX Gyre Pagella Math\n"
- "@item TeX Gyre Schola Math\n"
- "@item TeX Gyre Termes Math\n"
- "@item DejaVu Math TeX Gyre\n"
- "@item Asana-Math\n"
- "@item STIX\n"
- "@item XITS Math\n"
- "@item Libertinus Math\n"
- "@item Fira Math\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/tex.scm:11101
- msgid "Extended conditional commands"
- msgstr ""
- #: gnu/packages/tex.scm:11103
- msgid ""
- "This package extends the @code{ifthen} package by implementing new\n"
- "commands to go within the first argument of @code{\\\\ifthenelse}: to test\n"
- "whether a string is void or not, if a command is defined or equivalent to\n"
- "another. The package also enables use of complex expressions as introduced by\n"
- "the package @code{calc}, together with the ability of defining new commands to\n"
- "handle complex tests."
- msgstr ""
- #: gnu/packages/tex.scm:11151
- msgid "General-purpose index processor"
- msgstr ""
- #: gnu/packages/tex.scm:11152
- msgid ""
- "Xindy was developed after an impasse had been encountered in\n"
- "the attempt to complete internationalisation of @command{makeindex}. Xindy\n"
- "can be used to process indexes for documents marked up using (La)TeX, Nroff\n"
- "family and SGML-based languages. Xindy is highly configurable, both in markup\n"
- "terms and in terms of the collating order of the text being processed."
- msgstr ""
- #: gnu/packages/tex.scm:11171
- msgid "Display the value of a LaTeX counter in a variety of formats"
- msgstr ""
- #: gnu/packages/tex.scm:11173
- msgid ""
- "The package provides commands that display the value of a LaTeX counter in a\n"
- "variety of formats (ordinal, text, hexadecimal, decimal, octal, binary etc).\n"
- "The package offers some multilingual support; configurations for use in English\n"
- "(both British and American usage), French (including Belgian and Swiss\n"
- "variants), German, Italian, Portuguese and Spanish documents are provided. This\n"
- "package was originally provided as part of the author's datetime package, but is\n"
- "now distributed separately."
- msgstr ""
- #: gnu/packages/tex.scm:11200
- msgid "Inria fonts with LaTeX support"
- msgstr ""
- #: gnu/packages/tex.scm:11202
- msgid ""
- "Inria is a free font designed by Black[Foundry] for Inria, a French research\n"
- "institute. It comes as Serif and Sans Serif, each with three weights and\n"
- "matching italics. Using these fonts with XeLaTeX and LuaLaTeX is easy using\n"
- "the fontspec package; we refer to the documentation of fontspec for more\n"
- "information. The present package provides a way of using them with LaTeX and\n"
- "pdfLaTeX: it provides two style files, @file{InriaSerif.sty} and\n"
- "@file{InriaSans.sty}, together with the PostScript version of the fonts and\n"
- "their associated files. These were created using autoinst."
- msgstr ""
- #: gnu/packages/tex.scm:11223
- msgid "Wrap text around floats"
- msgstr ""
- #: gnu/packages/tex.scm:11225
- msgid ""
- "The package can float text around figures and tables which do not\n"
- "span the full width of a page; it improves upon floatfig, and allows\n"
- "tables and figures to be set left/right or alternating on even/odd pages."
- msgstr ""
- #: gnu/packages/tex.scm:11245
- msgid "Extensions and patches for fancyvrb"
- msgstr ""
- #: gnu/packages/tex.scm:11247
- msgid ""
- "This package provides several extensions to fancyvrb, including\n"
- "automatic line breaking and improved math mode. It also patches some fancyvrb\n"
- "internals."
- msgstr ""
- #: gnu/packages/tex.scm:11275
- msgid "Tool for manipulating BibTeX databases"
- msgstr ""
- #: gnu/packages/tex.scm:11277
- msgid ""
- "BibTool manipulates BibTeX files. The possibilities of BibTool include\n"
- "sorting and merging of BibTeX databases, generation of uniform reference keys,\n"
- "and selecting references used in a publication."
- msgstr ""
- #: gnu/packages/tex.scm:11307
- msgid "Format documents in APA style (6th edition)"
- msgstr ""
- #: gnu/packages/tex.scm:11308
- msgid ""
- "The class formats documents in APA style (6th\n"
- "Edition). It provides a full set of facilities in three different\n"
- "output modes (journal-like appearance, double-spaced manuscript,\n"
- "LaTeX-like document), in contrast to the earlier apa6e, which only formats\n"
- "double-spaced manuscripts in APA style. The class can mask author identity\n"
- "for copies for use in masked peer review.\n"
- "\n"
- "The class is a development of the apa class (which is no longer\n"
- "maintained)."
- msgstr ""
- #: gnu/packages/tex.scm:11330
- msgid "Citation style following the rules of the APA"
- msgstr ""
- #: gnu/packages/tex.scm:11331
- msgid ""
- "Apacite provides a BibTeX style and a LaTeX package which\n"
- "are designed to match the requirements of the American Psychological\n"
- "Association’s style for citations. The package follows the 6th edition\n"
- "of the APA manual, and is designed to work with the apa6 class. A test\n"
- "document is provided. The package is compatible with chapterbib and\n"
- "(to some extent) with hyperref (for limits of compatibility, see the\n"
- "documentation). The package also includes a means of generating an author\n"
- "index for a document."
- msgstr ""
- #: gnu/packages/tex.scm:11352
- msgid "Move floats to the end, leaving markers where they belong"
- msgstr ""
- #: gnu/packages/tex.scm:11353
- msgid ""
- "Place all floats on pages by themselves at the end of\n"
- "the document, optionally leaving markers like “[Figure 3 about here]”\n"
- "in the text near to where the figure (or table) would normally have\n"
- "occurred. Float types figure and table are recognised by the package,\n"
- "unmodified. Since several packages define other types of float, it is\n"
- "possible to register these float types with endfloat."
- msgstr ""
- #: gnu/packages/tex.scm:11372
- msgid "Collection of small packages by Walter Schmidt"
- msgstr ""
- #: gnu/packages/tex.scm:11373
- msgid ""
- "A bundle of packages that arise in the author’s area of interest:\n"
- "\n"
- "@itemize\n"
- "@item compliance of maths typesetting with ISO standards;\n"
- "@item symbols that work in both maths and text modes\n"
- "@item commas for both decimal separator and maths; and\n"
- "@item upright Greek letters in maths\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/tex.scm:11394
- msgid "Extending etoolbox patching commands"
- msgstr ""
- #: gnu/packages/tex.scm:11395
- msgid ""
- "The package generalises the macro patching commands\n"
- "provided by Philipp Lehmann’s etoolbox."
- msgstr ""
- #: gnu/packages/tex.scm:11409
- msgid "Notes in longtables"
- msgstr ""
- #: gnu/packages/tex.scm:11410
- msgid ""
- "The package provides the functionality of the\n"
- "threeparttable package to tables created using the longtable package."
- msgstr ""
- #: gnu/packages/tex.scm:11425
- msgid "Line numbers on paragraphs"
- msgstr ""
- #: gnu/packages/tex.scm:11426
- msgid ""
- "Adds line numbers to selected paragraphs with reference\n"
- "possible through the LaTeX @code{\\ref} and @code{\\pageref} cross reference\n"
- "mechanism. Line numbering may be extended to footnote lines, using the\n"
- "fnlineno package."
- msgstr ""
- #: gnu/packages/tex.scm:11452
- msgid "Babel support for Czech"
- msgstr ""
- #: gnu/packages/tex.scm:11454
- msgid ""
- "This package provides the language definition file for support of\n"
- "Czech in @code{babel}. Some shortcuts are defined, as well as translations to\n"
- "Czech of standard ``LaTeX names''."
- msgstr ""
- #: gnu/packages/tex.scm:11478
- msgid "Babel support for Dutch"
- msgstr ""
- #: gnu/packages/tex.scm:11480
- msgid ""
- "This package provides the language definition file for support of Dutch\n"
- "in @code{babel}. It provides all the necessary macros, definitions and\n"
- "settings to typeset Dutch documents."
- msgstr ""
- #: gnu/packages/tex.scm:11505
- msgid "Babel support for Finnish"
- msgstr ""
- #: gnu/packages/tex.scm:11507
- msgid ""
- "This package provides the language definition file for support of\n"
- "Finnish in @code{babel}. It provides all the necessary macros, definitions and\n"
- "settings to typeset Finnish documents."
- msgstr ""
- #: gnu/packages/tex.scm:11526
- msgid "Babel support for Norwegian"
- msgstr ""
- #: gnu/packages/tex.scm:11528
- msgid ""
- "The package provides the language definition file for support of\n"
- "Norwegian in @code{babel}. Some shortcuts are defined, as well as translations\n"
- "to Norsk of standard “LaTeX names”."
- msgstr ""
- #: gnu/packages/tex.scm:11553
- msgid "Babel support for Danish"
- msgstr ""
- #: gnu/packages/tex.scm:11555
- msgid ""
- "This package provides the language definition file for support of\n"
- "Danish in @code{babel}. It provides all the necessary macros, definitions and\n"
- "settings to typeset Danish documents."
- msgstr ""
- #: gnu/packages/tex.scm:11580
- msgid "Babel support for Polish"
- msgstr ""
- #: gnu/packages/tex.scm:11582
- msgid ""
- "This package provides the language definition file for support of\n"
- "Polish in @code{babel}. Some shortcuts are defined, as well as translations to\n"
- "Polish of standard ``LaTeX names''."
- msgstr ""
- #: gnu/packages/tex.scm:11601
- msgid "Framed environments that can split at page boundaries"
- msgstr ""
- #: gnu/packages/tex.scm:11603
- msgid ""
- "The @code{mdframed} package develops the facilities of @code{framed} in\n"
- "providing breakable framed and coloured boxes. The user may instruct the\n"
- "package to perform its operations using default LaTeX commands, PStricks or\n"
- "TikZ."
- msgstr ""
- #: gnu/packages/tex.scm:11618
- msgid "Set space between lines"
- msgstr ""
- #: gnu/packages/tex.scm:11620
- msgid ""
- "The @code{setspace} package provides support for setting the spacing between\n"
- "lines in a document. Package options include @code{singlespacing},\n"
- "@code{onehalfspacing}, and @code{doublespacing}. Alternatively the spacing\n"
- "can be changed as required with the @code{\\singlespacing},\n"
- "@code{\\onehalfspacing}, and @code{\\doublespacing} commands. Other size\n"
- "spacings also available."
- msgstr ""
- #: gnu/packages/tex.scm:11641
- msgid "Draw Gantt charts with TikZ"
- msgstr ""
- #: gnu/packages/tex.scm:11643
- msgid ""
- "The @code{pgfgantt} package provides an environment for drawing Gantt charts\n"
- "that contain various elements (titles, bars, milestones, groups and links).\n"
- "Several keys customize the appearance of the chart elements."
- msgstr ""
- #: gnu/packages/tex.scm:11659
- msgid "Make landscape pages display as landscape"
- msgstr ""
- #: gnu/packages/tex.scm:11661
- msgid ""
- "The @code{pdflscape} package adds PDF support to the @code{landscape}\n"
- "environment of package @code{lscape}, by setting the PDF @code{/Rotate} page\n"
- "attribute. Pages with this attribute will be displayed in landscape\n"
- "orientation by conforming PDF viewers."
- msgstr ""
- #: gnu/packages/tex.scm:11678
- msgid "Formats for dates, times and time zones"
- msgstr ""
- #: gnu/packages/tex.scm:11680
- msgid ""
- "The @code{datetime2} package provides commands for formatting dates, times\n"
- "and time zones and redefines @code{\\today} to use the same formatting style.\n"
- "In addition to @code{\\today}, you can also use\n"
- "@code{\\DTMcurrenttime} (current time) or @code{\\DTMnow} (current date and\n"
- "time). Dates and times can be saved for later use. The accompanying\n"
- "@code{datetime2-calc} package can be used to convert date-times to UTC+00:00.\n"
- "Language and regional support is provided by independently maintained and\n"
- "installed modules. The @code{datetime2-calc} package uses the\n"
- "@code{pgfcalendar} package (part of the PGF/TikZ bundle). This package\n"
- "replaces @code{datetime.sty} which is now obsolete."
- msgstr ""
- #: gnu/packages/tex.scm:11704
- msgid "Language and dialect tracker"
- msgstr ""
- #: gnu/packages/tex.scm:11706
- msgid ""
- "The @code{tracklang} package is provided for package developers who want a\n"
- "simple interface to find out which languages the user has requested through\n"
- "packages such as @code{babel} or @code{polyglossia}. This package does not\n"
- "provide any translations! Its purpose is simply to track which languages have\n"
- "been requested by the user. Generic TeX code is in @code{tracklang.tex} for\n"
- "non-LaTeX users."
- msgstr ""
- #: gnu/packages/tex.scm:11723
- msgid "Table package extensions"
- msgstr ""
- #: gnu/packages/tex.scm:11725
- msgid ""
- "The @code{ltablex} package modifies the @code{tabularx} environment to\n"
- "combine the features of the @code{tabularx} package (auto-sized columns in a\n"
- "fixed-width table) with those of the @code{longtable} package (multi-page\n"
- "tables)."
- msgstr ""
- #: gnu/packages/tex.scm:11742
- msgid "Alternative versions of \"ragged\"-type commands"
- msgstr ""
- #: gnu/packages/tex.scm:11744
- msgid ""
- "The @code{ragged2e} package defines new commands @code{\\Centering}, @code{\\RaggedLeft},\n"
- "and @code{\\RaggedRight} and new environments @code{Center}, @code{FlushLeft},\n"
- "and @code{FlushRight}, which set ragged text and are easily configurable to\n"
- "allow hyphenation (the corresponding commands in LaTeX, all of whose names are\n"
- "lower-case, prevent hyphenation altogether)."
- msgstr ""
- #: gnu/packages/tex.scm:11762
- msgid "Provides hooks into @code{\\selectfont}"
- msgstr ""
- #: gnu/packages/tex.scm:11764
- msgid ""
- "The @code{everysel} package provided hooks whose arguments are executed just\n"
- "after LaTeX has loaded a new font by means of @code{\\selectfont}. It has\n"
- "become obsolete with LaTeX versions 2021/01/05 or newer, since LaTeX now\n"
- "provides its own hooks to fulfill this task. For newer versions of LaTeX\n"
- "@code{everysel} only provides macros using LaTeX's hook management due to\n"
- "compatibility reasons. See @code{lthooks-doc.pdf} for instructions how to use\n"
- "@code{lthooks} instead of @code{everysel}."
- msgstr ""
- #: gnu/packages/tex.scm:11784
- msgid "Take action at every @code{\\shipout}"
- msgstr ""
- #: gnu/packages/tex.scm:11786
- msgid ""
- "The @code{everyshi} package provides hooks into @code{\\sshipout} called\n"
- "@code{\\EveryShipout} and @code{\\AtNextShipout} analogous to\n"
- "@code{\\AtBeginDocument}. With the introduction of the LaTeX hook management\n"
- "this package became obsolete in 2020 and is only provided for backwards\n"
- "compatibility. For current versions of LaTeX it is only mapping the hooks to\n"
- "the original @code{everyshi} macros. In case you use an older LaTeX format,\n"
- "@code{everyshi} will automatically fall back to its old implementation by\n"
- "loading @code{everyshi-2001-05-15}."
- msgstr ""
- #: gnu/packages/tex.scm:11827
- msgid "Control the typesetting of the abstract environment"
- msgstr ""
- #: gnu/packages/tex.scm:11828
- msgid ""
- "The abstract package gives you control over the typesetting\n"
- "of the abstract environment, and in particular provides for a one column\n"
- "abstract in a two column paper."
- msgstr ""
- #: gnu/packages/tex.scm:11863
- msgid "Automatic line breaking of displayed equations"
- msgstr ""
- #: gnu/packages/tex.scm:11864
- msgid ""
- "This package provides solutions to a number of common\n"
- "difficulties in writing displayed equations and getting high-quality output.\n"
- "The single most ambitious goal of the package is to support automatic\n"
- "linebreaking of displayed equations. Such linebreaking cannot be done without\n"
- "substantial changes under the hood in the way formulae are processed; the code\n"
- "must be watched carefully, keeping an eye on possible glitches. The bundle\n"
- "also contains the @code{flexisym} and @code{mathstyle} packages, which are\n"
- "both designated as support for @code{breqn}."
- msgstr ""
- #: gnu/packages/tex.scm:11884
- msgid "Selectively include/exclude portions of text"
- msgstr ""
- #: gnu/packages/tex.scm:11885
- msgid ""
- "This package provides environments for selectively including\n"
- "or excluding pieces of text, allowing the user to define new, separately\n"
- "controlled comment versions."
- msgstr ""
- #: gnu/packages/tex.scm:11921
- msgid "Tools to load and manipulate data"
- msgstr ""
- #: gnu/packages/tex.scm:11922
- msgid ""
- "This package provides tools to create databases using LaTeX\n"
- "commands or by importing external files. Databases may be sorted, filtered,\n"
- "and visualized using several kinds of configurable plots. Particular support\n"
- "is provided for mail merging, indexing, creating glossaries, manipulating\n"
- "bibliographies, and displaying personal pronouns."
- msgstr ""
- #: gnu/packages/tex.scm:11939
- msgid "Macros supporting the Mathematics of Physics"
- msgstr ""
- #: gnu/packages/tex.scm:11940
- msgid ""
- "The package defines simple and flexible macros for\n"
- "typesetting equations in the languages of vector calculus and linear\n"
- "algebra, using Dirac notation."
- msgstr ""
- #: gnu/packages/tex.scm:11967
- msgid "Use Source Sans Pro with TeX(-alike) systems"
- msgstr ""
- #: gnu/packages/tex.scm:11968
- msgid ""
- "This package provides the Source Sans Pro font family from\n"
- "Adobe in both Adobe Type 1 and OpenType formats, plus macros supporting the\n"
- "use of the fonts in LaTeX (Type 1) and XeLaTeX/LuaLaTeX (OTF)."
- msgstr ""
- #: gnu/packages/tex.scm:11990
- msgid "Use Source Serif Pro with TeX(-alike) systems"
- msgstr ""
- #: gnu/packages/tex.scm:11991
- msgid ""
- "This package provides the Source Serif Pro font family from\n"
- "Adobe in both Adobe Type 1 and OpenType formats, plus macros supporting the\n"
- "use of the fonts in LaTeX (Type 1) and XeLaTeX/LuaLaTeX (OTF)."
- msgstr ""
- #: gnu/packages/tex.scm:12013
- msgid "Use Source Code Pro with TeX(-alike) systems"
- msgstr ""
- #: gnu/packages/tex.scm:12014
- msgid ""
- "This package provides the Source Code Pro font family from\n"
- "Adobe in both Adobe Type 1 and OpenType formats, plus macros supporting the\n"
- "use of the fonts in LaTeX (Type 1) and XeLaTeX/LuaLaTeX (OTF)."
- msgstr ""
- #: gnu/packages/tex.scm:12029
- msgid "Disable/enable hyphenation"
- msgstr ""
- #: gnu/packages/tex.scm:12031
- msgid ""
- "This package can disable all hyphenation or enable hyphenation of\n"
- "non-alphabetics or monospaced fonts. The package can also enable hyphenation\n"
- "within ‘words’ that contain non-alphabetic characters (e.g., that include\n"
- "underscores), and hyphenation of text typeset in monospaced (e.g., cmtt)\n"
- "fonts."
- msgstr ""
- #: gnu/packages/tex.scm:12048
- msgid "Reference last page for Page N of M type footers"
- msgstr ""
- #: gnu/packages/tex.scm:12050
- msgid ""
- "This package enables referencing the number of pages in a LaTeX document\n"
- "through the introduction of a new label which can be referenced like\n"
- "@code{\\pageref{LastPage}} to give a reference to the last page of a document.\n"
- "It is particularly useful in the page footer that says: Page N of M."
- msgstr ""
- #: gnu/packages/tex.scm:12082
- msgid "``Tab'' to a measured position in the line"
- msgstr ""
- #: gnu/packages/tex.scm:12084
- msgid ""
- "This package provides @code{\\tabto{<length>}}, which moves the\n"
- "typesetting position to @code{<length>} from the left margin of the paragraph.\n"
- "If the typesetting position is already further along, @code{\\tabto} starts a\n"
- "new line; the command @code{\\tabto*} will move position backwards if\n"
- "necessary, so that previous text may be overwritten. In addition, the command\n"
- "@code{\\TabPositions} may be used to define a set of tabbing positions, after\n"
- "which the command @code{\\tab} advances typesetting position to the next\n"
- "defined ``tab stop''."
- msgstr ""
- #: gnu/packages/tex.scm:12123
- msgid "Hyphenation for letterspacing, underlining, and more"
- msgstr ""
- #: gnu/packages/tex.scm:12125
- msgid ""
- "@code{soul} enables hyphenatable spacing out (letterspacing),\n"
- "underlining, striking out, etc., using the TeX hyphenation algorithm to find\n"
- "the proper hyphens automatically. The package also provides a mechanism that\n"
- "can be used to implement similar tasks, that have to treat text syllable by\n"
- "syllable. The package itself does not support UTF-8 input in ordinary\n"
- "(PDF)LaTeX; some UTF-8 support is offered by package @code{soulutf8}."
- msgstr ""
- #: gnu/packages/tex.scm:12146
- msgid "String manipulation for (La)TeX"
- msgstr ""
- #: gnu/packages/tex.scm:12148
- msgid ""
- "@code{xstring} package provides macros for manipulating strings --\n"
- "testing a string's contents, extracting substrings, substitution of substrings\n"
- "and providing numbers such as string length, position of, or number of\n"
- "recurrences of, a substring. The package works equally in Plain TeX and LaTeX\n"
- "(though e-TeX is always required). The strings to be processed may contain\n"
- "(expandable) macros."
- msgstr ""
- #: gnu/packages/tex.scm:12168
- msgid "Deal with substrings in strings"
- msgstr ""
- #: gnu/packages/tex.scm:12170
- msgid ""
- "The package provides commands to deal with substrings of strings. Macros\n"
- "are provided to:\n"
- "\n"
- "@itemize\n"
- "@item determine if one string is a substring of another,\n"
- "@item return the parts of a string before or after a substring, and\n"
- "@item count the number of occurrences of a substring.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/tex.scm:12190
- msgid "Find the last value of a counter"
- msgstr ""
- #: gnu/packages/tex.scm:12192
- msgid ""
- "This package records the value that was last set, for any counter of\n"
- "interest. Since most such counters are simply incremented when they are\n"
- "changed, the recorded value will usually be the maximum value."
- msgstr ""
- #: gnu/packages/texinfo.scm:94
- msgid "The GNU documentation format"
- msgstr ""
- #: gnu/packages/texinfo.scm:96
- msgid ""
- "Texinfo is the official documentation format of the GNU project. It\n"
- "uses a single source file using explicit commands to produce a final document\n"
- "in any of several supported output formats, such as HTML or PDF. This\n"
- "package includes both the tools necessary to produce Info documents from\n"
- "their source and the command-line Info reader. The emphasis of the language\n"
- "is on expressing the content semantically, avoiding physical markup commands."
- msgstr ""
- #: gnu/packages/texinfo.scm:234
- msgid "Standalone Info documentation reader"
- msgstr ""
- #: gnu/packages/texinfo.scm:268
- msgid "Convert Texinfo to HTML"
- msgstr ""
- #: gnu/packages/texinfo.scm:270
- msgid ""
- "Texi2HTML is a Perl script which converts Texinfo source files to HTML\n"
- "output. It now supports many advanced features, such as internationalization\n"
- "and extremely configurable output formats.\n"
- "\n"
- "Development of Texi2HTML moved to the GNU Texinfo repository in 2010, since it\n"
- "was meant to replace the makeinfo implementation in GNU Texinfo. The route\n"
- "forward for authors is, in most cases, to alter manuals and build processes as\n"
- "necessary to use the new features of the makeinfo/texi2any implementation of\n"
- "GNU Texinfo. The Texi2HTML maintainers (one of whom is the principal author\n"
- "of the GNU Texinfo implementation) do not intend to make further releases of\n"
- "Texi2HTML."
- msgstr ""
- #: gnu/packages/texinfo.scm:328
- msgid "Lynx-style Info file and man page reader"
- msgstr ""
- #: gnu/packages/texinfo.scm:330
- msgid ""
- "Pinfo is an Info file viewer. Pinfo is similar in use to the Lynx web\n"
- "browser. You just move across info nodes, and select links, follow them, etc.\n"
- "It supports many colors. Pinfo also supports viewing of manual pages -- they\n"
- "are colorized like in the midnight commander's viewer, and additionally they\n"
- "are hypertextualized."
- msgstr ""
- #: gnu/packages/textutils.scm:101
- msgid "DOS/Mac to Unix and vice versa text file format converter"
- msgstr ""
- #: gnu/packages/textutils.scm:103
- msgid ""
- "dos2unix is a tool to convert line breaks in a text file from Unix format\n"
- "to DOS format and vice versa."
- msgstr ""
- #: gnu/packages/textutils.scm:122
- msgid "Text encoding converter"
- msgstr ""
- #: gnu/packages/textutils.scm:123
- msgid ""
- "The Recode library converts files between character sets and\n"
- "usages. It recognises or produces over 200 different character sets (or about\n"
- "300 if combined with an iconv library) and transliterates files between almost\n"
- "any pair. When exact transliteration are not possible, it gets rid of\n"
- "offending characters or falls back on approximations. The recode program is a\n"
- "handy front-end to the library."
- msgstr ""
- #: gnu/packages/textutils.scm:148
- msgid "Text encoding detection tool"
- msgstr ""
- #: gnu/packages/textutils.scm:149
- msgid ""
- "Enca (Extremely Naive Charset Analyser) consists of libenca,\n"
- "an encoding detection library, and enca, a command line frontend, integrating\n"
- "libenca and several charset conversion libraries and tools."
- msgstr ""
- #: gnu/packages/textutils.scm:206
- msgid "C library for processing UTF-8 Unicode data"
- msgstr ""
- #: gnu/packages/textutils.scm:207
- msgid ""
- "utf8proc is a small C library that provides Unicode\n"
- "normalization, case-folding, and other operations for data in the UTF-8\n"
- "encoding, supporting Unicode version 9.0.0."
- msgstr ""
- #: gnu/packages/textutils.scm:268 gnu/packages/textutils.scm:797
- msgid "Configuration file parser library"
- msgstr ""
- #: gnu/packages/textutils.scm:269
- msgid ""
- "libconfuse is a configuration file parser library. It\n"
- "supports sections and (lists of) values (strings, integers, floats, booleans\n"
- "or other sections), as well as some other features (such as\n"
- "single/double-quoted strings, environment variable expansion, functions and\n"
- "nested include statements)."
- msgstr ""
- #: gnu/packages/textutils.scm:311
- msgid "Gordon's text utils library"
- msgstr ""
- #: gnu/packages/textutils.scm:313
- msgid ""
- "libgtextutils is a text utilities library used by the fastx toolkit from\n"
- "the Hannon Lab."
- msgstr ""
- #: gnu/packages/textutils.scm:345
- msgid "C++ hash functions for strings"
- msgstr ""
- #: gnu/packages/textutils.scm:347
- msgid ""
- "CityHash provides hash functions for strings. The functions mix the\n"
- "input bits thoroughly but are not suitable for cryptography."
- msgstr ""
- #: gnu/packages/textutils.scm:402
- msgid "String library with very low memory overhead"
- msgstr ""
- #: gnu/packages/textutils.scm:404
- msgid "Ustr is a string library for C with very low memory overhead."
- msgstr ""
- #: gnu/packages/textutils.scm:427
- msgid "Convert between ASCII, hexadecimal and binary representations"
- msgstr ""
- #: gnu/packages/textutils.scm:428
- msgid ""
- "The two programs are useful for generating test data, for\n"
- "inspecting binary files, and for interfacing programs that generate textual\n"
- "output to programs that require binary input and conversely. They can also be\n"
- "useful when it is desired to reformat numbers.\n"
- "\n"
- "@itemize\n"
- "\n"
- "@item @command{ascii2binary} reads input consisting of ascii or hexadecimal\n"
- " representation numbers separated by whitespace and produces as output\n"
- " the binary equivalents. The type and precision of the binary output\n"
- " is selected using command line flags.\n"
- "\n"
- "@item @command{binary2ascii} reads input consisting of binary numbers\n"
- " and converts them to their ascii or hexadecimal representation.\n"
- " Command line flags specify the type and size of the binary numbers\n"
- " and provide control over the format of the output.\n"
- " Unsigned integers may be written out in binary, octal, decimal,\n"
- " or hexadecimal.\n"
- "\n"
- " Signed integers may be written out only in binary or decimal. Floating\n"
- " point numbers may be written out only decimal, either in standard or\n"
- " scientific notation. (If you want to examine the binary representation\n"
- " of floating point numbers, just treat the input as a sequence of unsigned\n"
- " characters.)\n"
- "\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/textutils.scm:485
- msgid "Find out what is in a Unicode file"
- msgstr ""
- #: gnu/packages/textutils.scm:486
- msgid ""
- "Useful tools when working with Unicode files when one\n"
- "doesn't know the writing system, doesn't have the necessary font, needs to\n"
- "inspect invisible characters, needs to find out whether characters have been\n"
- "combined or in what order they occur, or needs statistics on which characters\n"
- "occur.\n"
- "\n"
- "@itemize\n"
- "\n"
- "@item @command{uniname} defaults to printing the character offset of each\n"
- "character, its byte offset, its hex code value, its encoding, the glyph\n"
- "itself, and its name. It may also be used to validate UTF-8 input.\n"
- "\n"
- "@item @command{unidesc} reports the character ranges to which different\n"
- "portions of the text belong. It can also be used to identify Unicode encodings\n"
- "(e.g. UTF-16be) flagged by magic numbers.\n"
- "\n"
- "@item @command{unihist} generates a histogram of the characters in its input.\n"
- "\n"
- "@item @command{ExplicateUTF8} is intended for debugging or for learning about\n"
- "Unicode. It determines and explains the validity of a sequence of bytes as a\n"
- "UTF8 encoding.\n"
- "\n"
- "@item @command{utf8lookup} provides a handy way to look up Unicode characters\n"
- "from the command line.\n"
- "\n"
- "@item @command{unireverse} reverse each line of UTF-8 input\n"
- "character-by-character.\n"
- "\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/textutils.scm:530
- msgid "C/C++ configuration file library"
- msgstr ""
- #: gnu/packages/textutils.scm:532
- msgid ""
- "Libconfig is a simple library for manipulating structured configuration\n"
- "files. This file format is more compact and more readable than XML. And\n"
- "unlike XML, it is type-aware, so it is not necessary to do string parsing in\n"
- "application code."
- msgstr ""
- #: gnu/packages/textutils.scm:553
- msgid "Probabilistic fast file fingerprinting tool"
- msgstr ""
- #: gnu/packages/textutils.scm:555
- msgid ""
- "pfff is a tool for calculating a compact digital fingerprint of a file\n"
- "by sampling randomly from the file instead of reading it in full.\n"
- "Consequently, the computation has a flat performance characteristic,\n"
- "correlated with data variation rather than file size. pfff can be as reliable\n"
- "as existing hashing techniques, with provably negligible risk of collisions."
- msgstr ""
- #: gnu/packages/textutils.scm:581
- msgid "Regular expression library"
- msgstr ""
- #: gnu/packages/textutils.scm:582
- msgid ""
- "Oniguruma is a regular expressions library. The special\n"
- "characteristic of this library is that different character encoding for every\n"
- "regular expression object can be specified."
- msgstr ""
- #: gnu/packages/textutils.scm:622
- msgid "Microsoft Word document reader"
- msgstr ""
- #: gnu/packages/textutils.scm:623
- msgid ""
- "Antiword is an application for displaying Microsoft Word\n"
- "documents. It can also convert the document to PostScript or XML. Only\n"
- "documents made by MS Word version 2 and version 6 or later are supported. The\n"
- "name comes from: \"The antidote against people who send Microsoft Word files\n"
- "to everybody, because they believe that everybody runs Windows and therefore\n"
- "runs Word\"."
- msgstr ""
- #: gnu/packages/textutils.scm:656
- msgid "MS-Word to TeX or plain text converter"
- msgstr ""
- #: gnu/packages/textutils.scm:657
- msgid ""
- "@command{catdoc} extracts text from MS-Word files, trying to\n"
- "preserve as many special printable characters as possible. It supports\n"
- "everything up to Word-97. Also supported are MS Write documents and RTF files.\n"
- "\n"
- "@command{catdoc} does not preserve complex word formatting, but it can\n"
- "translate some non-ASCII characters into TeX escape codes. It's goal is to\n"
- "extract plain text and allow you to read it and, probably, reformat with TeX,\n"
- "according to TeXnical rules.\n"
- "\n"
- "This package also provides @command{xls2csv}, which extracts data from Excel\n"
- "spreadsheets and outputs it in comma-separated-value format, and\n"
- "@command{catppt}, which extracts data from PowerPoint presentations."
- msgstr ""
- #: gnu/packages/textutils.scm:698
- msgid "Portable C++ library for handling UTF-8"
- msgstr ""
- #: gnu/packages/textutils.scm:699
- msgid ""
- "UTF8-CPP is a C++ library for handling UTF-8 encoded text\n"
- "in a portable way."
- msgstr ""
- #: gnu/packages/textutils.scm:761
- msgid "Bayesian text and email classifier"
- msgstr ""
- #: gnu/packages/textutils.scm:763
- msgid ""
- "dbacl is a fast Bayesian text and email classifier. It builds a variety\n"
- "of language models using maximum entropy (minimum divergence) principles, and\n"
- "these can then be used to categorize input data automatically among multiple\n"
- "categories."
- msgstr ""
- #: gnu/packages/textutils.scm:799
- msgid "C library for creating and parsing configuration files."
- msgstr ""
- #: gnu/packages/textutils.scm:855
- msgid "Utilities to manipulate text and binary files"
- msgstr ""
- #: gnu/packages/textutils.scm:856
- msgid ""
- "The drm_tools package contains the following commands:\n"
- "@table @command\n"
- "@item accudate\n"
- "An extended version of the \"date\" program that has sub-second accuracy.\n"
- "@item binformat\n"
- "Format complex binary data into text.\n"
- "@item binload\n"
- "Load data into a binary file using simple commands from the input.\n"
- "@item binorder\n"
- "Sort, merge, search, retrieve or generate test data consisting of fixed size\n"
- "binary records.\n"
- "@item binreplace\n"
- "Find or find/replace in binary files.\n"
- "@item binsplit\n"
- "Split test data consisting of fixed size binary records into one or more\n"
- "output streams.\n"
- "@item chardiff\n"
- "Find changes between two files at the character level. Unlike \"diff\", it\n"
- "lists just the characters that differ, so if the 40,000th character is\n"
- "different only that one character will be shown, not the entire line.\n"
- "@item columnadd\n"
- "Add columns of integers, decimals, and/or times.\n"
- "@item datasniffer\n"
- "A utility for formatting binary data dumps.\n"
- "@item dmath\n"
- "Double precision interactive command line math calculator.\n"
- "@item extract\n"
- "Extract and emit data from text files based on character or token position.\n"
- "@item execinput\n"
- "A utility that reads from STDIN and executes each line as a command in a\n"
- "sub-process.\n"
- "@item indexed_text\n"
- "A utility for rapid retrieval of text by line numbers, in any order, from a\n"
- "text file.\n"
- "@item mdump\n"
- "Format binary data.\n"
- "@item msgqueue\n"
- "Create message queues and send/receive messages.\n"
- "@item mbin\n"
- "@itemx mbout\n"
- "Multiple buffer in and out. Used for buffering a lot of data between a slow\n"
- "device and a fast device. Mostly for buffering streaming tape drives for use\n"
- "with slower network connections, so that streaming is maintained as much as\n"
- "possible to minimize wear on the tape device.\n"
- "@item pockmark\n"
- "Corrupt data streams - useful for testing error correction and data recovery.\n"
- "@item tarsieve\n"
- "Filter, list, or split a tar file.\n"
- "@end table"
- msgstr ""
- #: gnu/packages/textutils.scm:930
- msgid "Syntax highlighting text component for Java Swing"
- msgstr ""
- #: gnu/packages/textutils.scm:931
- msgid ""
- "RSyntaxTextArea is a syntax highlighting, code folding text\n"
- "component for Java Swing. It extends @code{JTextComponent} so it integrates\n"
- "completely with the standard @code{javax.swing.text} package. It is fast and\n"
- "efficient, and can be used in any application that needs to edit or view\n"
- "source code."
- msgstr ""
- #: gnu/packages/textutils.scm:969
- msgid "Fast implementation of the edit distance (Levenshtein distance)"
- msgstr ""
- #: gnu/packages/textutils.scm:971
- msgid ""
- "This library simply implements Levenshtein distance algorithm with C++\n"
- "and Cython."
- msgstr ""
- #: gnu/packages/textutils.scm:988
- msgid "Convert between markup languages"
- msgstr ""
- #: gnu/packages/textutils.scm:990
- msgid ""
- "txt2tags is a document generator. It reads a text file with minimal\n"
- "markup and converts it to multiple formats."
- msgstr ""
- #: gnu/packages/textutils.scm:1014
- msgid "@code{runewidth} provides Go functions to work with string widths"
- msgstr ""
- #: gnu/packages/textutils.scm:1016
- msgid ""
- "The @code{runewidth} library provides Go functions for padding,\n"
- "measuring and checking the width of strings, with support for East Asian\n"
- "text."
- msgstr ""
- #: gnu/packages/textutils.scm:1067
- msgid "Recover text from @file{.docx} files, with good formatting"
- msgstr ""
- #: gnu/packages/textutils.scm:1069
- msgid ""
- "@command{docx2txt} is a Perl based command line utility to convert\n"
- "Microsoft Office @file{.docx} documents to equivalent text documents. Latest\n"
- "version supports following features during text extraction.\n"
- "\n"
- "@itemize\n"
- "@item Character conversions; currency characters are converted to respective\n"
- "names like Euro.\n"
- "@item Capitalisation of text blocks.\n"
- "@item Center and right justification of text fitting in a line of\n"
- "(configurable) 80 columns.\n"
- "@item Horizontal ruler, line breaks, paragraphs separation, tabs.\n"
- "@item Indicating hyperlinked text along with the hyperlink (configurable).\n"
- "@item Handling (bullet, decimal, letter, roman) lists along with (attempt at)\n"
- "indentation.\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/textutils.scm:1117
- msgid "HTML to plain text converter"
- msgstr ""
- #: gnu/packages/textutils.scm:1119
- msgid ""
- "@code{html2text} is a command line utility that converts HTML\n"
- "documents into plain text."
- msgstr ""
- #: gnu/packages/textutils.scm:1150
- msgid "Converter from OpenDocument Text to plain text"
- msgstr ""
- #: gnu/packages/textutils.scm:1151
- msgid ""
- "odt2txt is a command-line tool which extracts the text out\n"
- "of OpenDocument Texts, as produced by OpenOffice.org, KOffice, StarOffice and\n"
- "others.\n"
- "\n"
- "odt2txt can also extract text from some file formats similar to OpenDocument\n"
- "Text, such as OpenOffice.org XML (*.sxw), which was used by OpenOffice.org\n"
- "version 1.x and older StarOffice versions. To a lesser extent, odt2txt may be\n"
- "useful to extract content from OpenDocument spreadsheets (*.ods) and\n"
- "OpenDocument presentations (*.odp)."
- msgstr ""
- #: gnu/packages/textutils.scm:1191
- msgid "Convert between various bibliography formats"
- msgstr ""
- #: gnu/packages/textutils.scm:1192
- msgid ""
- "This package provides converters for various bibliography\n"
- "formats (e.g. Bibtex, RIS, ...) using a common XML intermediate."
- msgstr ""
- #: gnu/packages/textutils.scm:1273
- msgid "Convert between Traditional Chinese and Simplified Chinese"
- msgstr ""
- #: gnu/packages/textutils.scm:1274
- msgid ""
- "Open Chinese Convert (OpenCC) converts between Traditional\n"
- "Chinese and Simplified Chinese, supporting character-level conversion,\n"
- "phrase-level conversion, variant conversion, and regional idioms among\n"
- "Mainland China, Taiwan, and Hong-Kong."
- msgstr ""
- #: gnu/packages/textutils.scm:1308
- msgid "Network Kanji Filter"
- msgstr ""
- #: gnu/packages/textutils.scm:1309
- msgid ""
- "Nkf is yet another kanji code converter among networks,\n"
- "hosts and terminals. It converts input kanji code to designated kanji code\n"
- "such as ISO-2022-JP, Shift_JIS, EUC-JP, UTF-8, UTF-16 or UTF-32."
- msgstr ""
- #: gnu/packages/textutils.scm:1326
- msgid "Python module for writing Pandoc filters"
- msgstr ""
- #: gnu/packages/textutils.scm:1327
- msgid ""
- "Pandoc is a powerful utility to transform various\n"
- "input formats into a wide range of output formats. To alter the\n"
- "exported output document, Pandoc allows the usage of filters, which\n"
- "are pipes that read a JSON serialization of the Pandoc AST from stdin,\n"
- "transform it in some way, and write it to stdout. It allows therefore\n"
- "to alter the processing of Pandoc's supported input formats, for\n"
- "instance one can add new syntax elements to markdown, etc.\n"
- "\n"
- "This package provides Python bindings."
- msgstr ""
- #: gnu/packages/textutils.scm:1361
- msgid "Converts terminal escape sequences to HTML"
- msgstr ""
- #: gnu/packages/textutils.scm:1362
- msgid ""
- "@command{aha} (Ansi Html Adapter) converts ANSI escape sequences\n"
- "of a Unix terminal to HTML code."
- msgstr ""
- #: gnu/packages/textutils.scm:1389
- msgid "Fully customizable syntax-aware linter that focuses on your style"
- msgstr ""
- #: gnu/packages/textutils.scm:1391
- msgid ""
- "Vale is a fully extensible linter that focuses on your own writing style\n"
- "by making use of rules in individual YAML files. It is syntax-aware on markup\n"
- "languages such as HTML, Markdown, Asciidoc, and reStructuredText. The community\n"
- "around it also has a list of style guides implemented with Vale in\n"
- "@url{https://github.com/errata-ai/styles, their styles repo}."
- msgstr ""
- #: gnu/packages/textutils.scm:1425
- msgid "Line ending detection library"
- msgstr ""
- #: gnu/packages/textutils.scm:1427
- msgid ""
- "@code{utf-8-lineseparator} provides a tool to efficiently check text\n"
- "files for valid UTF-8 use and to report which line endings they use."
- msgstr ""
- #: gnu/packages/textutils.scm:1459
- msgid "Fast diff tool for comparing CSV files"
- msgstr ""
- #: gnu/packages/textutils.scm:1460
- msgid ""
- "@code{csvdiff} is a diff tool to compute changes between two\n"
- "CSV files. It can compare CSV files with a million records in under 2\n"
- "seconds. It is specifically suited for comparing CSV files dumped from\n"
- "database tables. GNU Diff is orders of magnitude faster for comparing line by\n"
- "line. @code{csvdiff} supports\n"
- "\n"
- "@itemize\n"
- "@item Selective comparison of fields in a row\n"
- "@item Specifying group of columns as primary-key to uniquely identify a row\n"
- "@item Ignoring columns\n"
- "@item Several output formats including colored git style output or\n"
- "JSON for post-processing\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/textutils.scm:1518
- msgid "Code-searching tool for programmers with large source trees"
- msgstr ""
- #: gnu/packages/textutils.scm:1519
- msgid ""
- "ack is a tool for finding text inside files. It is designed for\n"
- "hackers and programmers by being fast, ignoring VCS directories, letting a user\n"
- "easily specify file types, match highlighting, Perl-Compatible Regular\n"
- "Expressions, and being faster to type than grep."
- msgstr ""
- #: gnu/packages/version-control.scm:207
- msgid "Decentralized revision control system"
- msgstr ""
- #: gnu/packages/version-control.scm:209
- msgid ""
- "Breezy (@command{brz}) is a decentralized revision control system. By\n"
- "default, Breezy provides support for both the\n"
- "@uref{https://bazaar.canonical.com/, Bazaar} and @uref{https://www.git-scm.com,\n"
- "Git} file formats. Breezy is backwabrds compatible with Bazaar's disk format\n"
- "and protocols. One of the key differences with Bazaar is that Breezy runs on\n"
- "Python 3.3 and later, rather than on Python 2."
- msgstr ""
- #: gnu/packages/version-control.scm:587
- msgid "Distributed version control system"
- msgstr ""
- #: gnu/packages/version-control.scm:589
- msgid ""
- "Git is a free distributed version control system designed to handle\n"
- "everything from small to very large projects with speed and efficiency."
- msgstr ""
- #: gnu/packages/version-control.scm:710
- msgid "Convert Git logs to GNU ChangeLog format"
- msgstr ""
- #: gnu/packages/version-control.scm:711
- msgid ""
- "@code{git2cl} is a command line tool for converting Git\n"
- "logs to GNU ChangeLog format."
- msgstr ""
- #: gnu/packages/version-control.scm:770
- msgid "Simple version control system built on top of Git"
- msgstr ""
- #: gnu/packages/version-control.scm:772
- msgid ""
- "Gitless is a Git-compatible version control system that aims to be easy to\n"
- "learn and use. It simplifies the common workflow by committing changes to\n"
- "tracked files by default and saving any uncommitted changes as part of a branch.\n"
- "\n"
- "The friendly @command{gl} command-line interface gives feedback and helps you\n"
- "figure out what to do next.\n"
- "\n"
- "Gitless is implemented on top of Git and its commits and repositories are\n"
- "indistinguishable from Git's. You (or other contributors) can always fall back\n"
- "on @command{git}, and use any regular Git hosting service."
- msgstr ""
- #: gnu/packages/version-control.scm:799
- msgid "GitHub like contributions calendar for terminal"
- msgstr ""
- #: gnu/packages/version-control.scm:800
- msgid ""
- "@code{git-cal} is a script to view commits calendar similar\n"
- "to GitHub contributions calendar."
- msgstr ""
- #: gnu/packages/version-control.scm:856
- msgid "Library providing Git core methods"
- msgstr ""
- #: gnu/packages/version-control.scm:858
- msgid ""
- "Libgit2 is a portable, pure C implementation of the Git core methods\n"
- "provided as a re-entrant linkable library with a solid API, allowing you to\n"
- "write native speed custom Git applications in any language with bindings."
- msgstr ""
- #: gnu/packages/version-control.scm:947
- msgid "Transparent encryption of files in a git repository"
- msgstr ""
- #: gnu/packages/version-control.scm:948
- msgid ""
- "git-crypt enables transparent encryption and decryption of\n"
- "files in a git repository. Files which you choose to protect are encrypted when\n"
- "committed, and decrypted when checked out. git-crypt lets you freely share a\n"
- "repository containing a mix of public and private content. git-crypt gracefully\n"
- "degrades, so developers without the secret key can still clone and commit to a\n"
- "repository with encrypted files. This lets you store your secret material (such\n"
- "as keys or passwords) in the same repository as your code, without requiring you\n"
- "to lock down your entire repository."
- msgstr ""
- #: gnu/packages/version-control.scm:982
- msgid "Whole remote repository encryption"
- msgstr ""
- #: gnu/packages/version-control.scm:983
- msgid ""
- "git-remote-gcrypt is a Git remote helper to push and pull from\n"
- "repositories encrypted with GnuPG. It works with the standard Git transports,\n"
- "including repository hosting services like GitLab.\n"
- "\n"
- "Remote helper programs are invoked by Git to handle network transport. This\n"
- "helper handles @code{gcrypt:} URLs that access a remote repository encrypted\n"
- "with GPG, using our custom format.\n"
- "\n"
- "Supported locations are local, @code{rsync://} and @code{sftp://}, where the\n"
- "repository is stored as a set of files, or instead any Git URL where gcrypt\n"
- "will store the same representation in a Git repository, bridged over arbitrary\n"
- "Git transport.\n"
- "\n"
- "The aim is to provide confidential, authenticated Git storage and\n"
- "collaboration using typical untrusted file hosts or services."
- msgstr ""
- #: gnu/packages/version-control.scm:1100
- msgid "Web frontend for git repositories"
- msgstr ""
- #: gnu/packages/version-control.scm:1102
- msgid ""
- "CGit is an attempt to create a fast web interface for the Git SCM, using\n"
- "a built-in cache to decrease server I/O pressure."
- msgstr ""
- #: gnu/packages/version-control.scm:1137
- msgid "Send notification emails for Git pushes"
- msgstr ""
- #: gnu/packages/version-control.scm:1139
- msgid ""
- "This hook sends emails describing changes introduced by pushes to a Git\n"
- "repository. For each reference that was changed, it emits one ReferenceChange\n"
- "email summarizing how the reference was changed, followed by one Revision\n"
- "email for each new commit that was introduced by the reference change.\n"
- "\n"
- "This script is designed to be used as a post-receive hook in a Git\n"
- "repository"
- msgstr ""
- #: gnu/packages/version-control.scm:1173
- msgid "Copy directory to the gh-pages branch"
- msgstr ""
- #: gnu/packages/version-control.scm:1174
- msgid ""
- "Script that copies a directory to the gh-pages branch (by\n"
- "default) of the repository."
- msgstr ""
- #: gnu/packages/version-control.scm:1227
- msgid "Python implementation of the Git object database"
- msgstr ""
- #: gnu/packages/version-control.scm:1229
- msgid ""
- "GitDB allows you to access @dfn{bare} Git repositories for reading and\n"
- "writing. It aims at allowing full access to loose objects as well as packs\n"
- "with performance and scalability in mind. It operates exclusively on streams,\n"
- "allowing to handle large objects with a small memory footprint."
- msgstr ""
- #: gnu/packages/version-control.scm:1263
- msgid "Python library for interacting with Git repositories"
- msgstr ""
- #: gnu/packages/version-control.scm:1265
- msgid ""
- "GitPython is a python library used to interact with Git repositories,\n"
- "high-level like git-porcelain, or low-level like git-plumbing.\n"
- "\n"
- "It provides abstractions of Git objects for easy access of repository data,\n"
- "and additionally allows you to access the Git repository more directly using\n"
- "either a pure Python implementation, or the faster, but more resource intensive\n"
- "@command{git} command implementation."
- msgstr ""
- #: gnu/packages/version-control.scm:1301
- msgid "Command-line flags library for shell scripts"
- msgstr ""
- #: gnu/packages/version-control.scm:1303
- msgid ""
- "Shell Flags (shFlags) is a library written to greatly simplify the\n"
- "handling of command-line flags in Bourne based Unix shell scripts (bash, dash,\n"
- "ksh, sh, zsh). Most shell scripts use getopt for flags processing, but the\n"
- "different versions of getopt on various OSes make writing portable shell\n"
- "scripts difficult. shFlags instead provides an API that doesn't change across\n"
- "shell and OS versions so the script writer can be confident that the script\n"
- "will work."
- msgstr ""
- #: gnu/packages/version-control.scm:1347
- msgid "Git extensions for Vincent Driessen's branching model"
- msgstr ""
- #: gnu/packages/version-control.scm:1349
- msgid ""
- "Vincent Driessen's branching model is a git branching and release\n"
- "management strategy that helps developers keep track of features, hotfixes,\n"
- "and releases in bigger software projects. The git-flow library of git\n"
- "subcommands helps automate some parts of the flow to make working with it a\n"
- "lot easier."
- msgstr ""
- #: gnu/packages/version-control.scm:1399
- msgid "Stacked Git"
- msgstr ""
- #: gnu/packages/version-control.scm:1401
- msgid ""
- "StGit is a command-line application that provides functionality similar\n"
- "to Quilt (i.e., pushing/popping patches to/from a stack), but using Git\n"
- "instead of @command{diff} and @command{patch}. StGit stores its patches in a\n"
- "Git repository as normal Git commits, and provides a number of commands to\n"
- "manipulate them in various ways."
- msgstr ""
- #: gnu/packages/version-control.scm:1448
- msgid "Version control system for @code{$HOME}"
- msgstr ""
- #: gnu/packages/version-control.scm:1450
- msgid ""
- "vcsh version-controls configuration files in several Git repositories,\n"
- "all in one single directory. They all maintain their working trees without\n"
- "clobbering each other or interfering otherwise. By default, all Git\n"
- "repositories maintained via vcsh store the actual files in @code{$HOME},\n"
- "though this can be overridden."
- msgstr ""
- #: gnu/packages/version-control.scm:1486
- msgid "Run a command over a sequence of commits"
- msgstr ""
- #: gnu/packages/version-control.scm:1488
- msgid ""
- "git-test-sequence is similar to an automated git bisect except it’s\n"
- "linear. It will test every change between two points in the DAG. It will\n"
- "also walk each side of a merge and test those changes individually."
- msgstr ""
- #: gnu/packages/version-control.scm:1594
- msgid "Git access control layer"
- msgstr ""
- #: gnu/packages/version-control.scm:1596
- msgid ""
- "Gitolite is an access control layer on top of Git, providing fine access\n"
- "control to Git repositories."
- msgstr ""
- #: gnu/packages/version-control.scm:1663
- msgid "Simple Git forge written in Guile"
- msgstr ""
- #: gnu/packages/version-control.scm:1664
- msgid ""
- "Gitile is a Git forge written in Guile that lets you\n"
- "visualize your public Git repositories on a web interface."
- msgstr ""
- #: gnu/packages/version-control.scm:1739
- msgid "Framework for managing and maintaining pre-commit hooks"
- msgstr ""
- #: gnu/packages/version-control.scm:1741
- msgid ""
- "Pre-commit is a multi-language package manager for pre-commit hooks. You\n"
- "specify a list of hooks you want and pre-commit manages the installation and\n"
- "execution of any hook written in any language before every commit."
- msgstr ""
- #: gnu/packages/version-control.scm:1850
- msgid "Decentralized version control system"
- msgstr ""
- #: gnu/packages/version-control.scm:1852
- msgid ""
- "Mercurial is a free, distributed source control management tool. It\n"
- "efficiently handles projects of any size and offers an easy and intuitive\n"
- "interface."
- msgstr ""
- #: gnu/packages/version-control.scm:1878
- msgid "Flexible evolution of Mercurial history"
- msgstr ""
- #: gnu/packages/version-control.scm:1879
- msgid ""
- "Evolve is a Mercurial extension for faster and safer mutable\n"
- "history. It implements the changeset evolution concept for Mercurial."
- msgstr ""
- #: gnu/packages/version-control.scm:1934
- msgid "Automatic signing of changeset hashes"
- msgstr ""
- #: gnu/packages/version-control.scm:1935
- msgid ""
- "This package provides a Mercurial extension for signing\n"
- "the changeset hash of commits. The signure is embedded directly in the\n"
- "changeset itself; there won't be any extra commits. Either GnuPG or OpenSSL\n"
- "can be used for signing."
- msgstr ""
- #: gnu/packages/version-control.scm:1968
- msgid "HTTP and WebDAV client library"
- msgstr ""
- #: gnu/packages/version-control.scm:1970
- msgid ""
- "Neon is an HTTP and WebDAV client library, with a C interface and the\n"
- "following features:\n"
- "@enumerate\n"
- "@item High-level wrappers for common HTTP and WebDAV operations (GET, MOVE,\n"
- " DELETE, etc.);\n"
- "@item low-level interface to the HTTP request/response engine, allowing the use\n"
- " of arbitrary HTTP methods, headers, etc.;\n"
- "@item authentication support including Basic and Digest support, along with\n"
- " GSSAPI-based Negotiate on Unix, and SSPI-based Negotiate/NTLM on Win32;\n"
- "@item SSL/TLS support using OpenSSL or GnuTLS, exposing an abstraction layer for\n"
- " verifying server certificates, handling client certificates, and examining\n"
- " certificate properties, smartcard-based client certificates are also\n"
- " supported via a PKCS#11 wrapper interface;\n"
- "@item abstract interface to parsing XML using libxml2 or expat, and wrappers for\n"
- " simplifying handling XML HTTP response bodies;\n"
- "@item WebDAV metadata support, wrappers for PROPFIND and PROPPATCH to simplify\n"
- " property manipulation.\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/version-control.scm:2064
- msgid "Revision control system"
- msgstr ""
- #: gnu/packages/version-control.scm:2066
- msgid ""
- "@dfn{Subversion} (svn) exists to be recognized and adopted as a\n"
- "centralized version control system characterized by its\n"
- "reliability as a safe haven for valuable data; the simplicity of its model and\n"
- "usage; and its ability to support the needs of a wide variety of users and\n"
- "projects, from individuals to large-scale enterprise operations."
- msgstr ""
- #: gnu/packages/version-control.scm:2097
- msgid "Per-file local revision control system"
- msgstr ""
- #: gnu/packages/version-control.scm:2099
- msgid ""
- "RCS is the original Revision Control System. It works on a\n"
- "file-by-file basis, in contrast to subsequent version control systems such as\n"
- "CVS, Subversion, and Git. This can make it suitable for system\n"
- "administration files, for example, which are often inherently local to one\n"
- "machine."
- msgstr ""
- #: gnu/packages/version-control.scm:2120
- msgid "Display the last modification for each line in an RCS file"
- msgstr ""
- #: gnu/packages/version-control.scm:2122
- msgid ""
- "@code{blame} outputs an annotated revision from each RCS file. An\n"
- "annotated RCS file describes the revision and date in which each line was\n"
- "added to the file, and the author of each line."
- msgstr ""
- #: gnu/packages/version-control.scm:2141
- msgid "Display RCS change history"
- msgstr ""
- #: gnu/packages/version-control.scm:2143
- msgid ""
- "The @code{rcshist} utility displays the complete revision history of a\n"
- "set of RCS files including log messages and patches. It can also display the\n"
- "patch associated with a particular revision of an RCS file."
- msgstr ""
- #: gnu/packages/version-control.scm:2169
- msgid "Historical centralized version control system"
- msgstr ""
- #: gnu/packages/version-control.scm:2171
- msgid ""
- "CVS is a version control system, an important component of Source\n"
- "Configuration Management (SCM). Using it, you can record the history of\n"
- "sources files, and documents. It fills a similar role to the free software\n"
- "RCS, PRCS, and Aegis packages."
- msgstr ""
- #: gnu/packages/version-control.scm:2204
- msgid "Export an RCS or CVS history as a fast-import stream"
- msgstr ""
- #: gnu/packages/version-control.scm:2205
- msgid ""
- "This program analyzes a collection of RCS files in a CVS\n"
- "repository (or outside of one) and, when possible, emits an equivalent history\n"
- "in the form of a fast-import stream. Not all possible histories can be\n"
- "rendered this way; the program tries to emit useful warnings when it can't.\n"
- "\n"
- "The program can also produce a visualization of the resulting commit directed\n"
- "acyclic graph (DAG) in the input format of @uref{http://www.graphviz.org,\n"
- "Graphviz}. The package also includes @command{cvssync}, a tool for mirroring\n"
- "masters from remote CVS hosts."
- msgstr ""
- #: gnu/packages/version-control.scm:2233
- msgid "Version-control-agnostic ChangeLog diff and commit tool"
- msgstr ""
- #: gnu/packages/version-control.scm:2235
- msgid ""
- "The vc-dwim package contains two tools, \"vc-dwim\" and \"vc-chlog\".\n"
- "vc-dwim is a tool that simplifies the task of maintaining a ChangeLog and\n"
- "using version control at the same time, for example by printing a reminder\n"
- "when a file change has been described in the ChangeLog but the file has not\n"
- "been added to the VC. vc-chlog scans changed files and generates\n"
- "standards-compliant ChangeLog entries based on the changes that it detects."
- msgstr ""
- #: gnu/packages/version-control.scm:2260
- msgid "Make histograms from the output of @command{diff}"
- msgstr ""
- #: gnu/packages/version-control.scm:2262
- msgid ""
- "Diffstat reads the output of @command{diff} and displays a histogram of\n"
- "the insertions, deletions, and modifications per file. It is useful for\n"
- "reviewing large, complex patch files."
- msgstr ""
- #: gnu/packages/version-control.scm:2300
- msgid "File-based version control like SCCS"
- msgstr ""
- #: gnu/packages/version-control.scm:2301
- msgid ""
- "GNU CSSC provides a replacement for the legacy Unix source\n"
- "code control system SCCS. This allows old code still under that system to be\n"
- "accessed and migrated on modern systems."
- msgstr ""
- #: gnu/packages/version-control.scm:2392
- msgid "Project change supervisor"
- msgstr ""
- #: gnu/packages/version-control.scm:2393
- msgid ""
- "Aegis is a project change supervisor, and performs some of\n"
- "the Software Configuration Management needed in a CASE environment. Aegis\n"
- "provides a framework within which a team of developers may work on many\n"
- "changes to a program independently, and Aegis coordinates integrating these\n"
- "changes back into the master source of the program, with as little disruption\n"
- "as possible. Resolution of contention for source files, a major headache for\n"
- "any project with more than one developer, is one of Aegis's major functions."
- msgstr ""
- #: gnu/packages/version-control.scm:2443
- msgid "Ncurses-based text user interface for Git"
- msgstr ""
- #: gnu/packages/version-control.scm:2445
- msgid ""
- "Tig is an ncurses text user interface for Git, primarily intended as\n"
- "a history browser. It can also stage hunks for commit, or colorize the\n"
- "output of the @code{git} command."
- msgstr ""
- #: gnu/packages/version-control.scm:2466
- msgid "Print the modification time of the latest file"
- msgstr ""
- #: gnu/packages/version-control.scm:2468
- msgid ""
- "Recursively find the newest file in a file tree and print its\n"
- "modification time."
- msgstr ""
- #: gnu/packages/version-control.scm:2513
- msgid "Multiple repository management tool"
- msgstr ""
- #: gnu/packages/version-control.scm:2515
- msgid ""
- "Myrepos provides the @code{mr} command, which maps an operation (e.g.,\n"
- "fetching updates) over a collection of version control repositories. It\n"
- "supports a large number of version control systems: Git, Subversion,\n"
- "Mercurial, Bazaar, Darcs, CVS, Fossil, and Veracity."
- msgstr ""
- #: gnu/packages/version-control.scm:2551
- msgid "Framework to smartly mirror git repositories"
- msgstr ""
- #: gnu/packages/version-control.scm:2552
- msgid ""
- "Grokmirror enables replicating large git repository\n"
- "collections efficiently. Mirrors decide to clone and update repositories\n"
- "based on a manifest file published by servers."
- msgstr ""
- #: gnu/packages/version-control.scm:2572
- msgid "Tool for cryptographic patch attestation"
- msgstr ""
- #: gnu/packages/version-control.scm:2573
- msgid ""
- "This utility provides end-to-end cryptographic attestation\n"
- "of patches sent via mail. It does so by adapting the DKIM email signature\n"
- "standard to include cryptographic signatures via the X-Developer-Signature\n"
- "email header."
- msgstr ""
- #: gnu/packages/version-control.scm:2603
- msgid "Tool for working with patches in public-inbox archives"
- msgstr ""
- #: gnu/packages/version-control.scm:2605
- msgid ""
- "The @code{b4} command is designed to make it easier to participate in\n"
- "patch-based workflows for projects that have public-inbox archives.\n"
- "\n"
- "Features include:\n"
- "@itemize\n"
- "@item downloading a thread's mbox given a message ID\n"
- "@item processing an mbox so that is ready to be fed to @code{git-am}\n"
- "@item creating templated replies for processed patches and pull requests\n"
- "@item submitting cryptographic attestation for patches.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/version-control.scm:2651
- msgid "Use rclone-supported cloud storage providers with git-annex"
- msgstr ""
- #: gnu/packages/version-control.scm:2652
- msgid ""
- "This wrapper around rclone makes any destination supported\n"
- "by rclone usable with git-annex."
- msgstr ""
- #: gnu/packages/version-control.scm:2704
- msgid "Software configuration management system"
- msgstr ""
- #: gnu/packages/version-control.scm:2706
- msgid ""
- "Fossil is a distributed source control management system which supports\n"
- "access and administration over HTTP CGI or via a built-in HTTP server. It has\n"
- "a built-in wiki, built-in file browsing, built-in tickets system, etc."
- msgstr ""
- #: gnu/packages/version-control.scm:2739
- msgid "Static git page generator"
- msgstr ""
- #: gnu/packages/version-control.scm:2740
- msgid ""
- "Stagit creates static pages for git repositories, the results can\n"
- "be served with a HTTP file server of your choice."
- msgstr ""
- #: gnu/packages/version-control.scm:2775
- msgid "3D visualisation tool for source control repositories"
- msgstr ""
- #: gnu/packages/version-control.scm:2776
- msgid ""
- "@code{gource} provides a software version control\n"
- "visualization. The repository is displayed as a tree where the root of the\n"
- "repository is the centre, directories are branches and files are leaves.\n"
- "Contributors to the source code appear and disappear as they contribute to\n"
- "specific files and directories."
- msgstr ""
- #: gnu/packages/version-control.scm:2822
- msgid "Simple revision control"
- msgstr ""
- #: gnu/packages/version-control.scm:2825
- #, scheme-format
- msgid ""
- "SRC (or src) is simple revision control, a version-control system for\n"
- "single-file projects by solo developers and authors. It modernizes the\n"
- "venerable RCS, hence the anagrammatic acronym. The design is tuned for use\n"
- "cases like all those little scripts in your @file{~/bin} directory, or a\n"
- "directory full of HOWTOs."
- msgstr ""
- #: gnu/packages/version-control.scm:2876
- msgid "Determine when a commit was merged into a Git branch"
- msgstr ""
- #: gnu/packages/version-control.scm:2877
- msgid ""
- "This Git extension defines a subcommand,\n"
- "@code{when-merged}, whose core operation is to find the merge that brought a\n"
- "given commit into the specified ref(s). It has various options that control\n"
- "how information about the merge is displayed."
- msgstr ""
- #: gnu/packages/version-control.scm:2920
- msgid "Incremental merge for Git"
- msgstr ""
- #: gnu/packages/version-control.scm:2921
- msgid ""
- "This Git extension defines a subcommand, @code{imerge},\n"
- "which performs an incremental merge between two branches. Its two primary\n"
- "design goals are to reduce the pain of resolving merge conflicts by finding\n"
- "the smallest possible conflicts and to allow a merge to be saved, tested,\n"
- "interrupted, published, and collaborated on while in progress."
- msgstr ""
- #: gnu/packages/version-control.scm:2970
- msgid "Git extension for versioning large files"
- msgstr ""
- #: gnu/packages/version-control.scm:2972
- msgid ""
- "Git Large File Storage (LFS) replaces large files such as audio samples,\n"
- "videos, datasets, and graphics with text pointers inside Git, while storing the\n"
- "file contents on a remote server."
- msgstr ""
- #: gnu/packages/version-control.scm:3005
- msgid "Open a Git repository's homepage from the command-line"
- msgstr ""
- #: gnu/packages/version-control.scm:3007
- msgid ""
- "@code{git open} opens the repository's website from the command-line,\n"
- "guessing the URL pattern from the @code{origin} remote."
- msgstr ""
- #: gnu/packages/version-control.scm:3059
- msgid "Historical distributed version-control system"
- msgstr ""
- #: gnu/packages/version-control.scm:3061
- msgid ""
- "GNU Arch, aka. @code{tla}, was one of the first free distributed\n"
- "version-control systems (DVCS). It saw its last release in 2006. This\n"
- "package is provided for users who need to recover @code{tla} repositories and\n"
- "for historians."
- msgstr ""
- #: gnu/packages/version-control.scm:3105
- msgid "Makes diffs more human friendly and readable"
- msgstr ""
- #: gnu/packages/version-control.scm:3107
- msgid ""
- "@code{diff-so-fancy} strives to make your diffs human readable instead\n"
- "of machine readable. This helps improve code quality and helps you spot\n"
- "defects faster."
- msgstr ""
- #: gnu/packages/version-control.scm:3162
- msgid "Git implementation library"
- msgstr ""
- #: gnu/packages/version-control.scm:3163
- msgid "This package provides a Git implementation library."
- msgstr ""
- #: gnu/packages/version-control.scm:3212
- msgid "Command-line tool to manage multiple Git repos"
- msgstr ""
- #: gnu/packages/version-control.scm:3213
- msgid ""
- "This package provides a command-line tool to manage\n"
- "multiple Git repos.\n"
- "\n"
- "This tool does two things:\n"
- "@itemize\n"
- "@item display the status of multiple Git repos such as branch, modification,\n"
- "commit message side by side\n"
- "@item (batch) delegate Git commands/aliases from any working directory\n"
- "@end itemize\n"
- "\n"
- "If several repos are related, it helps to see their status together."
- msgstr ""
- #: gnu/packages/version-control.scm:3269
- msgid "Manage remote repository clones"
- msgstr ""
- #: gnu/packages/version-control.scm:3271
- #, scheme-format
- msgid ""
- "@code{ghq} provides a way to organize remote repository clones, like\n"
- "@code{go get} does. When you clone a remote repository by @code{ghq get}, ghq\n"
- "makes a directory under a specific root directory (by default @file{~/ghq})\n"
- "using the remote repository URL's host and path."
- msgstr ""
- #: gnu/packages/version-control.scm:3314
- msgid "Graphical interface to CVS, Subversion, Git, and RCS"
- msgstr ""
- #: gnu/packages/version-control.scm:3316
- msgid ""
- "TkRev (formerly TkCVS) is a Tcl/Tk-based graphical interface to the CVS,\n"
- "Subversion and Git configuration management systems. It will also help with\n"
- "RCS. It shows the status of the files in the current working directory, and\n"
- "has tools for tagging, merging, checking in/out, and other user operations.\n"
- "TkDiff is included for browsing and merging your changes."
- msgstr ""
- #: gnu/packages/version-control.scm:3347
- msgid "Quickly rewrite Git repository history"
- msgstr ""
- #: gnu/packages/version-control.scm:3349
- msgid ""
- "@command{git filter-repo} is a versatile tool for rewriting history,\n"
- "which roughly falls into the same space of tool like git filter-branch but\n"
- "with more capabilities. @command{git filter-repo} is now recommended by the\n"
- "Git project instead of @command{git filter-branch}."
- msgstr ""
- #: gnu/packages/version-control.scm:3387
- msgid "Linting Git commit messages"
- msgstr ""
- #: gnu/packages/version-control.scm:3389
- msgid ""
- "Gitlint is a Git commit message linter written in Python: it checks your\n"
- "commit messages for style."
- msgstr ""
- #: gnu/packages/version-control.scm:3433
- msgid "CLI tool for sr.ht"
- msgstr ""
- #: gnu/packages/version-control.scm:3434
- #, scheme-format
- msgid ""
- "@command{hut} is a CLI tool for\n"
- "@uref{https://sr.ht/~sircmpwn/sourcehut/, sr.ht}. It helps you interact with\n"
- "sr.ht's public services:\n"
- "@table @asis\n"
- "@item builds\n"
- "submit and manage build jobs\n"
- "@item git\n"
- "create, and manage git repositories and artifacts\n"
- "@item hg\n"
- "list Mercurial repositories\n"
- "@item lists\n"
- "manage mailing lists and patches\n"
- "@item meta\n"
- "manage PGP, and SSH keys\n"
- "@item pages\n"
- "publish and manage hosted websites\n"
- "@item paste\n"
- "create and manage pastes\n"
- "@item todo\n"
- "create and manage trackers, tickets\n"
- "@item graphql\n"
- "interact with GraphQL APIs directly\n"
- "@end table"
- msgstr ""
- #: gnu/packages/virtualization.scm:489
- msgid "Machine emulator and virtualizer"
- msgstr ""
- #: gnu/packages/virtualization.scm:491
- msgid ""
- "QEMU is a generic machine emulator and virtualizer.\n"
- "\n"
- "When used as a machine emulator, QEMU can run OSes and programs made for one\n"
- "machine (e.g. an ARM board) on a different machine---e.g., your own PC. By\n"
- "using dynamic translation, it achieves very good performance.\n"
- "\n"
- "When used as a virtualizer, QEMU achieves near native performances by\n"
- "executing the guest code directly on the host CPU. QEMU supports\n"
- "virtualization when executing under the Xen hypervisor or using\n"
- "the KVM kernel module in Linux. When using KVM, QEMU can virtualize x86,\n"
- "server and embedded PowerPC, and S390 guests."
- msgstr ""
- #: gnu/packages/virtualization.scm:517
- msgid "Machine emulator and virtualizer (without GUI) for the host architecture"
- msgstr ""
- #: gnu/packages/virtualization.scm:646
- msgid "Library for x86 emulation"
- msgstr ""
- #: gnu/packages/virtualization.scm:647
- msgid ""
- "Libx86emu is a small library to emulate x86 instructions. The\n"
- "focus here is not a complete emulation but to cover enough for typical\n"
- "firmware blobs. You can\n"
- "@enumerate\n"
- "@item intercept any memory access or directly map real memory ranges\n"
- "@item intercept any i/o access, map real i/o ports, or block any real i/o\n"
- "@item intercept any interrupt\n"
- "@item add a hook to run after each instruction\n"
- "@item recognize a special x86 instruction that can trigger logging\n"
- "@item use integrated logging\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/virtualization.scm:987
- msgid "Cluster-based virtual machine management system"
- msgstr ""
- #: gnu/packages/virtualization.scm:989
- msgid ""
- "Ganeti is a virtual machine management tool built on top of existing\n"
- "virtualization technologies such as Xen or KVM. Ganeti controls:\n"
- "\n"
- "@itemize @bullet\n"
- "@item Disk creation management;\n"
- "@item Operating system installation for instances (in co-operation with\n"
- "OS-specific install scripts); and\n"
- "@item Startup, shutdown, and failover between physical systems.\n"
- "@end itemize\n"
- "\n"
- "Ganeti is designed to facilitate cluster management of virtual servers and\n"
- "to provide fast and simple recovery after physical failures, using\n"
- "commodity hardware."
- msgstr ""
- #: gnu/packages/virtualization.scm:1031
- msgid "Guix OS integration for Ganeti"
- msgstr ""
- #: gnu/packages/virtualization.scm:1033
- msgid ""
- "This package provides a guest OS definition for Ganeti that uses\n"
- "Guix to build virtual machines."
- msgstr ""
- #: gnu/packages/virtualization.scm:1125
- msgid "Debian OS integration for Ganeti"
- msgstr ""
- #: gnu/packages/virtualization.scm:1127
- msgid ""
- "This package provides a guest OS definition for Ganeti. It installs\n"
- "Debian or a derivative using @command{debootstrap}."
- msgstr ""
- #: gnu/packages/virtualization.scm:1159
- msgid "RISC-V ISA Simulator"
- msgstr ""
- #: gnu/packages/virtualization.scm:1160
- msgid ""
- "Spike, the RISC-V ISA Simulator, implements a functional model\n"
- "of one or more RISC-V harts."
- msgstr ""
- #: gnu/packages/virtualization.scm:1206
- msgid "Operating system information database"
- msgstr ""
- #: gnu/packages/virtualization.scm:1207
- msgid ""
- "libosinfo is a GObject based library API for managing\n"
- "information about operating systems, hypervisors and the (virtual) hardware\n"
- "devices they can support. It includes a database containing device metadata\n"
- "and provides APIs to match/identify optimal devices for deploying an operating\n"
- "system on a hypervisor. Via GObject Introspection, the API is available in\n"
- "all common programming languages. Vala bindings are also provided."
- msgstr ""
- #: gnu/packages/virtualization.scm:1252
- msgid "Linux container tools"
- msgstr ""
- #: gnu/packages/virtualization.scm:1255
- msgid ""
- "LXC is a userspace interface for the Linux kernel containment features.\n"
- "Through a powerful API and simple tools, it lets Linux users easily create and\n"
- "manage system or application containers."
- msgstr ""
- #: gnu/packages/virtualization.scm:1280
- msgid "FUSE-based file system for LXC"
- msgstr ""
- #: gnu/packages/virtualization.scm:1281
- msgid ""
- "LXCFS is a small FUSE file system written with the intention\n"
- "of making Linux containers feel more like a virtual machine.\n"
- "It started as a side project of LXC but can be used by any run-time."
- msgstr ""
- #: gnu/packages/virtualization.scm:1384
- msgid "Daemon based on liblxc offering a REST API to manage containers"
- msgstr ""
- #: gnu/packages/virtualization.scm:1386
- msgid ""
- "LXD is a next generation system container manager. It\n"
- "offers a user experience similar to virtual machines but using Linux\n"
- "containers instead. It's image based with pre-made images available for a\n"
- "wide number of Linux distributions and is built around a very powerful, yet\n"
- "pretty simple, REST API."
- msgstr ""
- #: gnu/packages/virtualization.scm:1487
- msgid "Simple API for virtualization"
- msgstr ""
- #: gnu/packages/virtualization.scm:1488
- msgid ""
- "Libvirt is a C toolkit to interact with the virtualization\n"
- "capabilities of recent versions of Linux. The library aims at providing long\n"
- "term stable C API initially for the Xen paravirtualization but should be able\n"
- "to integrate other virtualization mechanisms if needed."
- msgstr ""
- #: gnu/packages/virtualization.scm:1516
- msgid "GLib wrapper around libvirt"
- msgstr ""
- #: gnu/packages/virtualization.scm:1517
- msgid ""
- "libvirt-glib wraps the libvirt library to provide a\n"
- "high-level object-oriented API better suited for glib-based applications, via\n"
- "three libraries:\n"
- "\n"
- "@enumerate\n"
- "@item libvirt-glib - GLib main loop integration & misc helper APIs\n"
- "@item libvirt-gconfig - GObjects for manipulating libvirt XML documents\n"
- "@item libvirt-gobject - GObjects for managing libvirt objects\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/virtualization.scm:1548
- msgid "Python bindings to libvirt"
- msgstr ""
- #: gnu/packages/virtualization.scm:1549
- msgid ""
- "This package provides Python bindings to the libvirt\n"
- "virtualization library."
- msgstr ""
- #: gnu/packages/virtualization.scm:1662
- msgid "Manage virtual machines"
- msgstr ""
- #: gnu/packages/virtualization.scm:1664
- msgid ""
- "The virt-manager application is a desktop user interface for managing\n"
- "virtual machines through libvirt. It primarily targets KVM VMs, but also\n"
- "manages Xen and LXC (Linux containers). It presents a summary view of running\n"
- "domains, their live performance and resource utilization statistics."
- msgstr ""
- #: gnu/packages/virtualization.scm:1771
- msgid "Checkpoint and restore in user space"
- msgstr ""
- #: gnu/packages/virtualization.scm:1772
- msgid ""
- "Using this tool, you can freeze a running application (or\n"
- "part of it) and checkpoint it to a hard drive as a collection of files. You\n"
- "can then use the files to restore and run the application from the point it\n"
- "was frozen at. The distinctive feature of the CRIU project is that it is\n"
- "mainly implemented in user space."
- msgstr ""
- #: gnu/packages/virtualization.scm:1816
- msgid "QEMU Monitor Protocol Python library"
- msgstr ""
- #: gnu/packages/virtualization.scm:1817
- msgid ""
- "@code{emu.qmp} is a\n"
- "@url{https://gitlab.com/qemu-project/qemu/-/blob/master/docs/interop/qmp-intro.txt,\n"
- "QEMU Monitor Protocol (QMP)} library written in Python. It is used to send\n"
- "QMP messages to running QEMU emulators. It can be used to communicate with\n"
- "QEMU emulators, the QEMU Guest Agent (QGA), the QEMU Storage Daemon (QSD), or\n"
- "any other utility or application that speaks QMP."
- msgstr ""
- #: gnu/packages/virtualization.scm:1843
- msgid "Backup and restore QEMU machines"
- msgstr ""
- #: gnu/packages/virtualization.scm:1844
- msgid ""
- "@command{qmpbackup} is designed to create and restore full\n"
- "and incremental backups of running QEMU virtual machines via QMP, the QEMU\n"
- "Machine Protocol."
- msgstr ""
- #: gnu/packages/virtualization.scm:1927
- msgid "KVM Frame Relay (KVMFR) implementation"
- msgstr ""
- #: gnu/packages/virtualization.scm:1928
- msgid ""
- "Looking Glass allows the use of a KVM (Kernel-based Virtual\n"
- "Machine) configured for VGA PCI Pass-through without an attached physical\n"
- "monitor, keyboard or mouse. It displays the VM's rendered contents on your\n"
- "main monitor/GPU."
- msgstr ""
- #: gnu/packages/virtualization.scm:1976
- msgid "Open container initiative runtime"
- msgstr ""
- #: gnu/packages/virtualization.scm:1979
- msgid ""
- "@command{runc} is a command line client for running applications\n"
- "packaged according to the\n"
- "@uref{https://github.com/opencontainers/runtime-spec/blob/master/spec.md, Open\n"
- "Container Initiative (OCI) format} and is a compliant implementation of the\n"
- "Open Container Initiative specification."
- msgstr ""
- #: gnu/packages/virtualization.scm:2026
- msgid "Tool for modifying Open Container images"
- msgstr ""
- #: gnu/packages/virtualization.scm:2028
- msgid ""
- "@command{umoci} is a tool that allows for high-level modification of an\n"
- "Open Container Initiative (OCI) image layout and its tagged images."
- msgstr ""
- #: gnu/packages/virtualization.scm:2080
- msgid "Interact with container images and container image registries"
- msgstr ""
- #: gnu/packages/virtualization.scm:2082
- msgid ""
- "@command{skopeo} is a command line utility providing various operations\n"
- "with container images and container image registries. It can:\n"
- "@enumerate\n"
- "\n"
- "@item Copy container images between various containers image stores,\n"
- "converting them as necessary.\n"
- "\n"
- "@item Convert a Docker schema 2 or schema 1 container image to an OCI image.\n"
- "\n"
- "@item Inspect a repository on a container registry without needlessly pulling\n"
- "the image.\n"
- "\n"
- "@item Sign and verify container images.\n"
- "\n"
- "@item Delete container images from a remote container registry.\n"
- "\n"
- "@end enumerate"
- msgstr ""
- #: gnu/packages/virtualization.scm:2116
- msgid "Python bindings for Vagrant"
- msgstr ""
- #: gnu/packages/virtualization.scm:2118
- msgid ""
- "Python-vagrant is a Python module that provides a thin wrapper around the\n"
- "@code{vagrant} command line executable, allowing programmatic control of Vagrant\n"
- "virtual machines."
- msgstr ""
- #: gnu/packages/virtualization.scm:2178
- msgid "Unprivileged sandboxing tool"
- msgstr ""
- #: gnu/packages/virtualization.scm:2179
- msgid ""
- "Bubblewrap is aimed at running applications in a sandbox,\n"
- "restricting their access to parts of the operating system or user data such as\n"
- "the home directory. Bubblewrap always creates a new mount namespace, and the\n"
- "user can specify exactly what parts of the file system should be made visible\n"
- "in the sandbox. These directories are mounted with the @code{nodev} option\n"
- "by default and can be made read-only."
- msgstr ""
- #: gnu/packages/virtualization.scm:2204
- msgid "Emulator for x86 PC"
- msgstr ""
- #: gnu/packages/virtualization.scm:2206
- msgid ""
- "Bochs is an emulator which can emulate Intel x86 CPU, common I/O\n"
- "devices, and a custom BIOS. It can also be compiled to emulate many different\n"
- "x86 CPUs, from early 386 to the most recent x86-64 Intel and AMD processors.\n"
- "Bochs can run most Operating Systems inside the emulation including Linux,\n"
- "DOS or Microsoft Windows."
- msgstr ""
- #: gnu/packages/virtualization.scm:2416
- msgid "Xen Virtual Machine Monitor"
- msgstr ""
- #: gnu/packages/virtualization.scm:2417
- msgid ""
- "This package provides the Xen Virtual Machine Monitor\n"
- "which is a hypervisor."
- msgstr ""
- #: gnu/packages/virtualization.scm:2448
- msgid "Tools for managing the osinfo database"
- msgstr ""
- #: gnu/packages/virtualization.scm:2449
- msgid ""
- "This package contains a set of tools to assist\n"
- "administrators and developers in managing the database."
- msgstr ""
- #: gnu/packages/virtualization.scm:2481
- msgid "Database of information about operating systems"
- msgstr ""
- #: gnu/packages/virtualization.scm:2482
- msgid ""
- "Osinfo-db provides the database files for use with the\n"
- "libosinfo library. It provides information about guest operating systems for\n"
- "use with virtualization provisioning tools"
- msgstr ""
- #: gnu/packages/virtualization.scm:2522
- msgid "QEMU Wrapper written in Python"
- msgstr ""
- #: gnu/packages/virtualization.scm:2524
- msgid ""
- "@code{transient} is a wrapper for QEMU allowing the creation of virtual\n"
- "machines with shared folder, ssh, and disk creation support."
- msgstr ""
- #: gnu/packages/virtualization.scm:2555
- msgid "RISC-V Proxy Kernel"
- msgstr ""
- #: gnu/packages/virtualization.scm:2556
- msgid ""
- "The RISC-V Proxy Kernel, @command{pk}, is a lightweight\n"
- "application execution environment that can host statically-linked RISC-V ELF\n"
- "binaries. It is designed to support tethered RISC-V implementations with\n"
- "limited I/O capability and thus handles I/O-related system calls by proxying\n"
- "them to a host computer.\n"
- "\n"
- "This package also contains the Berkeley Boot Loader, @command{bbl}, which is a\n"
- "supervisor execution environment for tethered RISC-V systems. It is designed\n"
- "to host the RISC-V Linux port."
- msgstr ""
- #: gnu/packages/webkit.scm:95
- msgid "General-purpose library for WPE"
- msgstr ""
- #: gnu/packages/webkit.scm:96
- msgid ""
- "LibWPE is general-purpose library specifically developed for\n"
- "the WPE-flavored port of WebKit."
- msgstr ""
- #: gnu/packages/webkit.scm:120
- msgid "Wayland WPE backend"
- msgstr ""
- #: gnu/packages/webkit.scm:122
- msgid ""
- "This package provides a backend implementation for the WPE WebKit\n"
- "engine that uses Wayland for graphics output."
- msgstr ""
- #: gnu/packages/webkit.scm:264
- msgid "Web content engine for GTK+"
- msgstr ""
- #: gnu/packages/webkit.scm:265
- msgid ""
- "WebKitGTK+ is a full-featured port of the WebKit rendering engine,\n"
- "suitable for projects requiring any kind of web integration, from hybrid\n"
- "HTML/CSS applications to full-fledged web browsers. WebKitGTK+ video playing\n"
- "capabilities can be extended through the use of GStreamer plugins (not\n"
- "propagated by default) such as @code{gst-plugins-good} and\n"
- "@code{gst-plugins-bad}."
- msgstr ""
- #: gnu/packages/webkit.scm:325
- msgid "WebKit port optimized for embedded devices"
- msgstr ""
- #: gnu/packages/webkit.scm:326
- msgid ""
- "WPE WebKit allows embedders to create simple and performant\n"
- "systems based on Web platform technologies. It is designed with hardware\n"
- "acceleration in mind, leveraging common 3D graphics APIs for best performance."
- msgstr ""
- #: gnu/packages/web.scm:266
- msgid "Qt-based HTTP Library"
- msgstr ""
- #: gnu/packages/web.scm:268
- msgid ""
- "Qhttp is a light-weight and asynchronous HTTP library\n"
- "(both server & client) in Qt5 and C++14."
- msgstr ""
- #: gnu/packages/web.scm:296
- msgid "Featureful HTTP server"
- msgstr ""
- #: gnu/packages/web.scm:298
- msgid ""
- "The Apache HTTP Server Project is a collaborative software development\n"
- "effort aimed at creating a robust, commercial-grade, featureful, and\n"
- "freely-available source code implementation of an HTTP (Web) server. The\n"
- "project is jointly managed by a group of volunteers located around the world,\n"
- "using the Internet and the Web to communicate, plan, and develop the server\n"
- "and its related documentation."
- msgstr ""
- #: gnu/packages/web.scm:330
- msgid "Apache HTTPD module for Python WSGI applications"
- msgstr ""
- #: gnu/packages/web.scm:332
- msgid ""
- "The mod_wsgi module for the Apache HTTPD Server adds support for running\n"
- "applications that support the Python @acronym{WSGI, Web Server Gateway\n"
- "Interface} specification."
- msgstr ""
- #: gnu/packages/web.scm:372
- msgid "Command line tool for saving web pages as a single HTML file"
- msgstr ""
- #: gnu/packages/web.scm:374
- msgid ""
- "Monolith bundles any web page into a single HTML file.\n"
- "\n"
- "Unlike conventional ``Save page as…'', Monolith not only saves the target\n"
- "document, it embeds CSS, image, and JavaScript assets all at once, producing\n"
- "a single HTML5 document.\n"
- "\n"
- "If compared to saving websites with @samp{wget -mpk}, Monolith embeds\n"
- "all assets as data URLs and therefore displays the saved page exactly\n"
- "the same, being completely separated from the Internet."
- msgstr ""
- #: gnu/packages/web.scm:475
- msgid "HTTP and reverse proxy server"
- msgstr ""
- #: gnu/packages/web.scm:477
- msgid ""
- "Nginx (\"engine X\") is a high-performance web and reverse proxy server\n"
- "created by Igor Sysoev. It can be used both as a stand-alone web server\n"
- "and as a proxy to reduce the load on back-end HTTP or mail servers."
- msgstr ""
- #: gnu/packages/web.scm:533
- msgid "Documentation for the nginx web server"
- msgstr ""
- #: gnu/packages/web.scm:535
- msgid "This package provides HTML documentation for the nginx web server."
- msgstr ""
- #: gnu/packages/web.scm:662
- msgid "Nginx module for parsing the Accept-Language HTTP header"
- msgstr ""
- #: gnu/packages/web.scm:664
- msgid ""
- "This nginx module parses the Accept-Language field in HTTP headers and\n"
- "chooses the most suitable locale for the user from the list of locales\n"
- "supported at your website."
- msgstr ""
- #: gnu/packages/web.scm:709
- msgid "XSLScript with NGinx specific modifications"
- msgstr ""
- #: gnu/packages/web.scm:711
- msgid ""
- "XSLScript is a terse notation for writing complex XSLT stylesheets.\n"
- "This is modified version, specifically intended for use with the NGinx\n"
- "documentation."
- msgstr ""
- #: gnu/packages/web.scm:783
- msgid "NGINX module for Lua programming language support"
- msgstr ""
- #: gnu/packages/web.scm:784
- msgid ""
- "This NGINX module provides a scripting support with Lua\n"
- "programming language."
- msgstr ""
- #: gnu/packages/web.scm:833
- msgid "NGINX module for audio and video streaming with RTMP"
- msgstr ""
- #: gnu/packages/web.scm:834
- msgid ""
- "This NGINX module provides streaming with the @acronym{RTMP,\n"
- "Real-Time Messaging Protocol}, @acronym{DASH, Dynamic Adaptive Streaming over HTTP},\n"
- "and @acronym{HLS, HTTP Live Streaming} protocols. It allows NGINX to accept\n"
- "incoming RTMP streams for recording or redistribution. It also supports\n"
- "on-demand streaming from a file on disk and pulling from an upstream RTMP\n"
- "stream. Remote control of the module is possible over HTTP."
- msgstr ""
- #: gnu/packages/web.scm:888
- msgid "NGINX module for monitoring virtual host traffic status"
- msgstr ""
- #: gnu/packages/web.scm:889
- msgid ""
- "This NGINX module provides access to virtual host status information,\n"
- "similar to live activity monitoring provided with NGINX plus."
- msgstr ""
- #: gnu/packages/web.scm:953
- msgid "Lightweight HTTP and reverse proxy server"
- msgstr ""
- #: gnu/packages/web.scm:955
- msgid ""
- "Lighttpd is a secure, fast, compliant, and very flexible web-server that\n"
- "has been optimized for high-performance environments. It has a very low\n"
- "memory footprint compared to other webservers. Its features include FastCGI,\n"
- "CGI, authentication, output compression, URL rewriting and many more."
- msgstr ""
- #: gnu/packages/web.scm:982
- msgid "Language-independent, high-performant extension to CGI"
- msgstr ""
- #: gnu/packages/web.scm:983
- msgid ""
- "FastCGI is a language-independent, scalable extension to CGI\n"
- "that provides high performance without the limitations of server specific\n"
- "APIs."
- msgstr ""
- #: gnu/packages/web.scm:1020
- msgid "Simple server for running CGI applications over FastCGI"
- msgstr ""
- #: gnu/packages/web.scm:1021
- msgid ""
- "Fcgiwrap is a simple server for running CGI applications\n"
- "over FastCGI. It hopes to provide clean CGI support to Nginx (and other web\n"
- "servers that may need it)."
- msgstr ""
- #: gnu/packages/web.scm:1049
- msgid "PSGI/Plack web server"
- msgstr ""
- #: gnu/packages/web.scm:1050
- msgid ""
- "Starman is a PSGI perl web server that has unique features\n"
- "such as high performance, preforking, signal support, superdaemon awareness,\n"
- "and UNIX socket support."
- msgstr ""
- #: gnu/packages/web.scm:1081
- msgid "Java Web Start"
- msgstr ""
- #: gnu/packages/web.scm:1083
- msgid ""
- "IcedTea-Web is an implementation of the @dfn{Java Network Launching\n"
- "Protocol}, also known as Java Web Start. This package provides tools and\n"
- "libraries for working with JNLP applets."
- msgstr ""
- #: gnu/packages/web.scm:1106
- msgid "JSON C library"
- msgstr ""
- #: gnu/packages/web.scm:1108
- msgid ""
- "Jansson is a C library for encoding, decoding and manipulating JSON\n"
- "data."
- msgstr ""
- #: gnu/packages/web.scm:1126
- msgid "JSON implementation in C"
- msgstr ""
- #: gnu/packages/web.scm:1128
- msgid ""
- "JSON-C implements a reference counting object model that allows you to\n"
- "easily construct JSON objects in C, output them as JSON-formatted strings and\n"
- "parse JSON-formatted strings back into the C representation of JSON objects.\n"
- "It aims to conform to RFC 7159."
- msgstr ""
- #: gnu/packages/web.scm:1203
- msgid "JSON parser written in ANSI C"
- msgstr ""
- #: gnu/packages/web.scm:1204
- msgid ""
- "This package provides a very low footprint JSON parser\n"
- "written in portable ANSI C.\n"
- "\n"
- "@itemize\n"
- "@item BSD licensed with no dependencies (i.e. just drop the C file into your\n"
- "project)\n"
- "@item Never recurses or allocates more memory than it needs\n"
- "@item Very simple API with operator sugar for C++\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/web.scm:1248
- msgid "Library that maps JSON data to QVariant objects"
- msgstr ""
- #: gnu/packages/web.scm:1249
- msgid ""
- "QJson is a Qt-based library that maps JSON data to\n"
- "@code{QVariant} objects. JSON arrays will be mapped to @code{QVariantList}\n"
- "instances, while JSON's objects will be mapped to @code{QVariantMap}."
- msgstr ""
- #: gnu/packages/web.scm:1299
- msgid "Qt-based C++ library for OAuth authorization scheme"
- msgstr ""
- #: gnu/packages/web.scm:1300
- msgid ""
- "QOAuth is an attempt to support interaction with\n"
- "OAuth-powered network services in a Qt way, i.e. simply, clearly and\n"
- "efficiently. It gives the application developer no more than 4 methods."
- msgstr ""
- #: gnu/packages/web.scm:1410
- msgid "Hierarchical data exploration with zoomable HTML5 pie charts"
- msgstr ""
- #: gnu/packages/web.scm:1412
- msgid ""
- "Krona is a flexible tool for exploring the relative proportions of\n"
- "hierarchical data, such as metagenomic classifications, using a radial,\n"
- "space-filling display. It is implemented using HTML5 and JavaScript, allowing\n"
- "charts to be explored locally or served over the Internet, requiring only a\n"
- "current version of any major web browser."
- msgstr ""
- #: gnu/packages/web.scm:1448
- msgid "JSON parser/generator for C++ with both SAX/DOM style API"
- msgstr ""
- #: gnu/packages/web.scm:1450
- msgid ""
- "RapidJSON is a fast JSON parser/generator for C++ with both SAX/DOM\n"
- "style API."
- msgstr ""
- #: gnu/packages/web.scm:1476
- msgid "C library for parsing and generating JSON"
- msgstr ""
- #: gnu/packages/web.scm:1478
- msgid ""
- "@acronym{YAJL, Yet Another JSON Library} is a small event-driven\n"
- "(SAX-style) JSON parser and validating generator written in ANSI C."
- msgstr ""
- #: gnu/packages/web.scm:1509
- msgid "WebSockets library written in C"
- msgstr ""
- #: gnu/packages/web.scm:1511
- msgid ""
- "Libwebsockets is a library that allows C programs to establish client\n"
- "and server WebSockets connections---a protocol layered above HTTP that allows\n"
- "for efficient socket-like bidirectional reliable communication channels."
- msgstr ""
- #: gnu/packages/web.scm:1537
- msgid "WebAssembly Binary Toolkit"
- msgstr ""
- #: gnu/packages/web.scm:1538
- msgid ""
- "WABT (pronounced: wabbit) is a suite of tools for\n"
- "WebAssembly, including:\n"
- "\n"
- "@enumerate\n"
- "@item @command{wat2wasm} translates from WebAssembly text format to the\n"
- "WebAssembly binary format\n"
- "@item @command{wasm2wat} is the inverse; it translates from the binary format\n"
- "back to the text format (also known as a .wat)\n"
- "@item @command{wasm-objdump} prints information about a wasm binary, similarly\n"
- "to @command{objdump}.\n"
- "@item @command{wasm-interp} decodes ands run a WebAssembly binary file using a\n"
- "stack-based interpreter\n"
- "@item @command{wat-desugar} parses .wat text form as supported by the spec\n"
- "interpreter (s-expressions, flat syntax, or mixed) and prints the canonical\n"
- "flat format\n"
- "@item @command{wasm2c} converts a WebAssembly binary file to a C source and\n"
- "header file.\n"
- "@end enumerate\n"
- "\n"
- "These tools are intended for use in (or for development of) toolchains or\n"
- "other systems that want to manipulate WebAssembly files."
- msgstr ""
- #: gnu/packages/web.scm:1604
- msgid "WebAssembly interpreter"
- msgstr ""
- #: gnu/packages/web.scm:1605
- msgid "WASM3 is a fast WebAssembly interpreter."
- msgstr ""
- #: gnu/packages/web.scm:1634
- msgid "C++ library implementing the WebSocket protocol"
- msgstr ""
- #: gnu/packages/web.scm:1635
- msgid ""
- "WebSocket++ is a C++ library that can be used to implement\n"
- "WebSocket functionality. The goals of the project are to provide a WebSocket\n"
- "implementation that is simple, portable, flexible, lightweight, low level, and\n"
- "high performance."
- msgstr ""
- #: gnu/packages/web.scm:1674
- msgid "C WebSocket library"
- msgstr ""
- #: gnu/packages/web.scm:1675
- msgid ""
- "@code{Wslay} is an event-based C library for the WebSocket\n"
- "protocol version 13, described in RFC 6455. Besides a high-level API it\n"
- "provides callbacks for sending and receiving frames directly. @code{Wslay}\n"
- "only supports the data transfer part of WebSocket protocol and does not\n"
- "perform the opening handshake in HTTP."
- msgstr ""
- #: gnu/packages/web.scm:1703
- msgid "C library for the Publix Suffix List"
- msgstr ""
- #: gnu/packages/web.scm:1705
- msgid ""
- "A \"public suffix\" is a domain name under which Internet users can\n"
- "directly register own names.\n"
- "\n"
- "Browsers and other web clients can use it to avoid privacy-leaking\n"
- "\"supercookies\", avoid privacy-leaking \"super domain\" certificates, domain\n"
- "highlighting parts of the domain in a user interface, and sorting domain lists\n"
- "by site.\n"
- "\n"
- "Libpsl has built-in PSL data for fast access, allowing to load PSL data from\n"
- "files, checks if a given domain is a public suffix, provides immediate cookie\n"
- "domain verification, finds the longest public part of a given domain, finds\n"
- "the shortest private part of a given domain, works with international\n"
- "domains (UTF-8 and IDNA2008 Punycode), is thread-safe, and handles IDNA2008\n"
- "UTS#46."
- msgstr ""
- #: gnu/packages/web.scm:1761
- msgid "Bundler and minifier tool for JavaScript and TypeScript"
- msgstr ""
- #: gnu/packages/web.scm:1763
- msgid ""
- "The esbuild tool provides a unified bundler, transpiler and\n"
- "minifier. It packages up JavaScript and TypeScript code, along with JSON\n"
- "and other data, for distribution on the web."
- msgstr ""
- #: gnu/packages/web.scm:1798
- msgid "Light-weight HTTP/HTTPS proxy daemon"
- msgstr ""
- #: gnu/packages/web.scm:1799
- msgid ""
- "Tinyproxy is a light-weight HTTP/HTTPS proxy\n"
- "daemon. Designed from the ground up to be fast and yet small, it is an ideal\n"
- "solution for use cases such as embedded deployments where a full featured HTTP\n"
- "proxy is required, but the system resources for a larger proxy are\n"
- "unavailable."
- msgstr ""
- #: gnu/packages/web.scm:1832
- msgid "Small caching web proxy"
- msgstr ""
- #: gnu/packages/web.scm:1834
- msgid ""
- "Polipo is a small caching web proxy (web cache, HTTP proxy, and proxy\n"
- "server). It was primarily designed to be used by one person or a small group\n"
- "of people."
- msgstr ""
- #: gnu/packages/web.scm:1861
- msgid "WebSockets support for any application/server"
- msgstr ""
- #: gnu/packages/web.scm:1862
- msgid ""
- "Websockify translates WebSockets traffic to normal socket\n"
- "traffic. Websockify accepts the WebSockets handshake, parses it, and then\n"
- "begins forwarding traffic between the client and the target in both\n"
- "directions."
- msgstr ""
- #: gnu/packages/web.scm:1888
- msgid "Caching web proxy optimized for intermittent internet links"
- msgstr ""
- #: gnu/packages/web.scm:1889
- msgid ""
- "WWWOFFLE is a proxy web server that is especially good for\n"
- "intermittent internet links. It can cache HTTP, HTTPS, FTP, and finger\n"
- "protocols, and supports browsing and requesting pages while offline, indexing,\n"
- "modifying pages and incoming and outgoing headers, monitoring pages for\n"
- "changes, and much more."
- msgstr ""
- #: gnu/packages/web.scm:1913
- msgid "C library implementing the OAuth API"
- msgstr ""
- #: gnu/packages/web.scm:1915
- msgid ""
- "liboauth is a collection of C functions implementing the OAuth API.\n"
- "liboauth provides functions to escape and encode strings according to OAuth\n"
- "specifications and offers high-level functionality built on top to sign\n"
- "requests or verify signatures using either NSS or OpenSSL for calculating the\n"
- "hash/signatures."
- msgstr ""
- #: gnu/packages/web.scm:1937 gnu/packages/web.scm:1971
- #: gnu/packages/web.scm:1993
- msgid "Media stream URL parser"
- msgstr ""
- #: gnu/packages/web.scm:1938
- msgid ""
- "This package contains support scripts called by libquvi to\n"
- "parse media stream properties."
- msgstr ""
- #: gnu/packages/web.scm:1972
- msgid ""
- "libquvi is a library with a C API for parsing media stream\n"
- "URLs and extracting their actual media files."
- msgstr ""
- #: gnu/packages/web.scm:1994
- msgid ""
- "quvi is a command-line-tool suite to extract media files\n"
- "from streaming URLs. It is a command-line wrapper for the libquvi library."
- msgstr ""
- #: gnu/packages/web.scm:2065
- msgid "High-performance asynchronous HTTP client library"
- msgstr ""
- #: gnu/packages/web.scm:2067
- msgid ""
- "serf is a C-based HTTP client library built upon the Apache Portable\n"
- "Runtime (APR) library. It multiplexes connections, running the read/write\n"
- "communication asynchronously. Memory copies and transformations are kept to a\n"
- "minimum to provide high performance operation."
- msgstr ""
- #: gnu/packages/web.scm:2102
- msgid "SASS Compiler, implemented as a C/C++ library"
- msgstr ""
- #: gnu/packages/web.scm:2104
- msgid ""
- "LibSass is a @acronym{SASS,Syntactically awesome style sheets} compiler\n"
- "library designed for portability and efficiency. To actually compile SASS\n"
- "stylesheets, you'll need to use another program that uses this library,\n"
- "@var{sassc} for example."
- msgstr ""
- #: gnu/packages/web.scm:2152
- msgid "CSS pre-processor"
- msgstr ""
- #: gnu/packages/web.scm:2153
- msgid ""
- "SassC is a compiler written in C for the CSS pre-processor\n"
- "language known as SASS."
- msgstr ""
- #: gnu/packages/web.scm:2197
- msgid "Compile a log format string to perl-code"
- msgstr ""
- #: gnu/packages/web.scm:2198
- msgid ""
- "This module provides methods to compile a log format string\n"
- "to perl-code, for faster generation of access_log lines."
- msgstr ""
- #: gnu/packages/web.scm:2225
- msgid "SASL authentication framework"
- msgstr ""
- #: gnu/packages/web.scm:2226
- msgid "Authen::SASL provides an SASL authentication framework."
- msgstr ""
- #: gnu/packages/web.scm:2248
- msgid "Sensible default Catalyst action"
- msgstr ""
- #: gnu/packages/web.scm:2249
- msgid ""
- "This Catalyst action implements a sensible default end\n"
- "action, which will forward to the first available view."
- msgstr ""
- #: gnu/packages/web.scm:2280
- msgid "Automated REST Method Dispatching"
- msgstr ""
- #: gnu/packages/web.scm:2281
- msgid ""
- "This Action handles doing automatic method dispatching for\n"
- "REST requests. It takes a normal Catalyst action, and changes the dispatch to\n"
- "append an underscore and method name. First it will try dispatching to an\n"
- "action with the generated name, and failing that it will try to dispatch to a\n"
- "regular method."
- msgstr ""
- #: gnu/packages/web.scm:2311
- msgid "Storage class for Catalyst authentication using DBIx::Class"
- msgstr ""
- #: gnu/packages/web.scm:2312
- msgid ""
- "The Catalyst::Authentication::Store::DBIx::Class class\n"
- "provides access to authentication information stored in a database via\n"
- "DBIx::Class."
- msgstr ""
- #: gnu/packages/web.scm:2337
- msgid "Create only one instance of Moose component per context"
- msgstr ""
- #: gnu/packages/web.scm:2338
- msgid ""
- "Catalyst::Component::InstancePerContext returns a new\n"
- "instance of a component on each request."
- msgstr ""
- #: gnu/packages/web.scm:2373
- msgid "Catalyst Development Tools"
- msgstr ""
- #: gnu/packages/web.scm:2374
- msgid ""
- "The Catalyst-Devel distribution includes a variety of\n"
- "modules useful for the development of Catalyst applications, but not required\n"
- "to run them. Catalyst-Devel includes the Catalyst::Helper system, which\n"
- "autogenerates scripts and tests; Module::Install::Catalyst, a Module::Install\n"
- "extension for Catalyst; and requirements for a variety of development-related\n"
- "modules."
- msgstr ""
- #: gnu/packages/web.scm:2401
- msgid "Regex DispatchType for Catalyst"
- msgstr ""
- #: gnu/packages/web.scm:2402
- msgid ""
- "Dispatch type managing path-matching behaviour using\n"
- "regexes. Regex dispatch types have been deprecated and removed from Catalyst\n"
- "core. It is recommend that you use Chained methods or other techniques\n"
- "instead. As part of the refactoring, the dispatch priority of Regex vs Regexp\n"
- "vs LocalRegex vs LocalRegexp may have changed. Priority is now influenced by\n"
- "when the dispatch type is first seen in your application."
- msgstr ""
- #: gnu/packages/web.scm:2448
- msgid "DBIx::Class::Schema Model Class"
- msgstr ""
- #: gnu/packages/web.scm:2449
- msgid ""
- "This is a Catalyst Model for DBIx::Class::Schema-based\n"
- "Models."
- msgstr ""
- #: gnu/packages/web.scm:2470
- msgid "Request logging from within Catalyst"
- msgstr ""
- #: gnu/packages/web.scm:2471
- msgid ""
- "This Catalyst plugin enables you to create \"access logs\"\n"
- "from within a Catalyst application instead of requiring a webserver to do it\n"
- "for you. It will work even with Catalyst debug logging turned off."
- msgstr ""
- #: gnu/packages/web.scm:2504
- msgid "Infrastructure plugin for the Catalyst authentication framework"
- msgstr ""
- #: gnu/packages/web.scm:2505
- msgid ""
- "The authentication plugin provides generic user support for\n"
- "Catalyst apps. It is the basis for both authentication (checking the user is\n"
- "who they claim to be), and authorization (allowing the user to do what the\n"
- "system authorises them to do)."
- msgstr ""
- #: gnu/packages/web.scm:2532
- msgid "Role-based authorization for Catalyst"
- msgstr ""
- #: gnu/packages/web.scm:2533
- msgid ""
- "Catalyst::Plugin::Authorization::Roles provides role-based\n"
- "authorization for Catalyst based on Catalyst::Plugin::Authentication."
- msgstr ""
- #: gnu/packages/web.scm:2554
- msgid "Captchas for Catalyst"
- msgstr ""
- #: gnu/packages/web.scm:2555
- msgid ""
- "This plugin creates and validates Captcha images for\n"
- "Catalyst."
- msgstr ""
- #: gnu/packages/web.scm:2578
- msgid "Load config files of various types"
- msgstr ""
- #: gnu/packages/web.scm:2579
- msgid ""
- "This module will attempt to load find and load configuration\n"
- "files of various types. Currently it supports YAML, JSON, XML, INI and Perl\n"
- "formats."
- msgstr ""
- #: gnu/packages/web.scm:2607
- msgid "Catalyst generic session plugin"
- msgstr ""
- #: gnu/packages/web.scm:2608
- msgid ""
- "This plugin links the two pieces required for session\n"
- "management in web applications together: the state, and the store."
- msgstr ""
- #: gnu/packages/web.scm:2633
- msgid "Maintain session IDs using cookies"
- msgstr ""
- #: gnu/packages/web.scm:2634
- msgid ""
- "In order for Catalyst::Plugin::Session to work, the session\n"
- "ID needs to be stored on the client, and the session data needs to be stored\n"
- "on the server. This plugin stores the session ID on the client using the\n"
- "cookie mechanism."
- msgstr ""
- #: gnu/packages/web.scm:2663
- msgid "FastMmap session storage backend"
- msgstr ""
- #: gnu/packages/web.scm:2664
- msgid ""
- "Catalyst::Plugin::Session::Store::FastMmap is a fast session\n"
- "storage plugin for Catalyst that uses an mmap'ed file to act as a shared\n"
- "memory interprocess cache. It is based on Cache::FastMmap."
- msgstr ""
- #: gnu/packages/web.scm:2687
- msgid "Stack trace on the Catalyst debug screen"
- msgstr ""
- #: gnu/packages/web.scm:2688
- msgid ""
- "This plugin enhances the standard Catalyst debug screen by\n"
- "including a stack trace of your application up to the point where the error\n"
- "occurred. Each stack frame is displayed along with the package name, line\n"
- "number, file name, and code context surrounding the line number."
- msgstr ""
- #: gnu/packages/web.scm:2713
- msgid "Simple serving of static pages"
- msgstr ""
- #: gnu/packages/web.scm:2714
- msgid ""
- "The Static::Simple plugin is designed to make serving static\n"
- "content in your application during development quick and easy, without\n"
- "requiring a single line of code from you. This plugin detects static files by\n"
- "looking at the file extension in the URL (such as .css or .png or .js). The\n"
- "plugin uses the lightweight MIME::Types module to map file extensions to\n"
- "IANA-registered MIME types, and will serve your static files with the correct\n"
- "MIME type directly to the browser, without being processed through Catalyst."
- msgstr ""
- #: gnu/packages/web.scm:2772
- msgid "The Catalyst Framework Runtime"
- msgstr ""
- #: gnu/packages/web.scm:2773
- msgid ""
- "Catalyst is a modern framework for making web applications.\n"
- "It is designed to make it easy to manage the various tasks you need to do to\n"
- "run an application on the web, either by doing them itself, or by letting you\n"
- "\"plug in\" existing Perl modules that do what you need."
- msgstr ""
- #: gnu/packages/web.scm:2800
- msgid "Replace request base with value passed by HTTP proxy"
- msgstr ""
- #: gnu/packages/web.scm:2801
- msgid ""
- "This module is a Moose::Role which allows you more\n"
- "flexibility in your application's deployment configurations when deployed\n"
- "behind a proxy. Using this module, the request base ($c->req->base) is\n"
- "replaced with the contents of the X-Request-Base header."
- msgstr ""
- #: gnu/packages/web.scm:2828
- msgid "Download data in many formats"
- msgstr ""
- #: gnu/packages/web.scm:2829
- msgid ""
- "The purpose of this module is to provide a method for\n"
- "downloading data into many supportable formats. For example, downloading a\n"
- "table based report in a variety of formats (CSV, HTML, etc.)."
- msgstr ""
- #: gnu/packages/web.scm:2852
- msgid "Catalyst JSON view"
- msgstr ""
- #: gnu/packages/web.scm:2853
- msgid ""
- "Catalyst::View::JSON is a Catalyst View handler that returns\n"
- "stash data in JSON format."
- msgstr ""
- #: gnu/packages/web.scm:2878
- msgid "Template View Class"
- msgstr ""
- #: gnu/packages/web.scm:2879
- msgid ""
- "This module is a Catalyst view class for the Template\n"
- "Toolkit."
- msgstr ""
- #: gnu/packages/web.scm:2906
- msgid "Trait Loading and Resolution for Catalyst Components"
- msgstr ""
- #: gnu/packages/web.scm:2907
- msgid ""
- "Adds a \"COMPONENT\" in Catalyst::Component method to your\n"
- "Catalyst component base class that reads the optional \"traits\" parameter\n"
- "from app and component config and instantiates the component subclass with\n"
- "those traits using \"new_with_traits\" in MooseX::Traits from\n"
- "MooseX::Traits::Pluggable."
- msgstr ""
- #: gnu/packages/web.scm:2930
- msgid "Apply roles to Catalyst classes"
- msgstr ""
- #: gnu/packages/web.scm:2931
- msgid ""
- "CatalystX::RoleApplicator applies roles to Catalyst\n"
- "application classes."
- msgstr ""
- #: gnu/packages/web.scm:2955
- msgid "Catalyst development server with Starman"
- msgstr ""
- #: gnu/packages/web.scm:2956
- msgid ""
- "This module provides a Catalyst extension to replace the\n"
- "development server with Starman."
- msgstr ""
- #: gnu/packages/web.scm:2977
- msgid "Handle Common Gateway Interface requests and responses"
- msgstr ""
- #: gnu/packages/web.scm:2978
- msgid ""
- "CGI.pm is a stable, complete and mature solution for\n"
- "processing and preparing HTTP requests and responses. Major features include\n"
- "processing form submissions, file uploads, reading and writing cookies, query\n"
- "string generation and manipulation, and processing and preparing HTTP\n"
- "headers."
- msgstr ""
- #: gnu/packages/web.scm:3003
- msgid "Generate and process stateful forms"
- msgstr ""
- #: gnu/packages/web.scm:3005
- msgid ""
- "@code{CGI::FormBuilder} provides an easy way to generate and process CGI\n"
- "form-based applications."
- msgstr ""
- #: gnu/packages/web.scm:3030
- msgid "Persistent session data in CGI applications"
- msgstr ""
- #: gnu/packages/web.scm:3032
- msgid ""
- "@code{CGI::Session} provides modular session management system across\n"
- "HTTP requests."
- msgstr ""
- #: gnu/packages/web.scm:3052
- msgid "CGI interface that is CGI.pm compliant"
- msgstr ""
- #: gnu/packages/web.scm:3053
- msgid ""
- "CGI::Simple provides a relatively lightweight drop in\n"
- "replacement for CGI.pm. It shares an identical OO interface to CGI.pm for\n"
- "parameter parsing, file upload, cookie handling and header generation."
- msgstr ""
- #: gnu/packages/web.scm:3074
- msgid "Build structures from CGI data"
- msgstr ""
- #: gnu/packages/web.scm:3075
- msgid ""
- "This is a module for building structured data from CGI\n"
- "inputs, in a manner reminiscent of how PHP does."
- msgstr ""
- #: gnu/packages/web.scm:3097
- msgid "Date conversion routines"
- msgstr ""
- #: gnu/packages/web.scm:3098
- msgid ""
- "This module provides functions that deal with the date\n"
- "formats used by the HTTP protocol."
- msgstr ""
- #: gnu/packages/web.scm:3118
- msgid "MD5 sums for files and urls"
- msgstr ""
- #: gnu/packages/web.scm:3119
- msgid ""
- "Digest::MD5::File is a Perl extension for getting MD5 sums\n"
- "for files and urls."
- msgstr ""
- #: gnu/packages/web.scm:3137
- msgid "Perl locale encoding determination"
- msgstr ""
- #: gnu/packages/web.scm:3139
- msgid ""
- "The POSIX locale system is used to specify both the language\n"
- "conventions requested by the user and the preferred character set to\n"
- "consume and output. The Encode::Locale module looks up the charset and\n"
- "encoding (called a CODESET in the locale jargon) and arranges for the\n"
- "Encode module to know this encoding under the name \"locale\". It means\n"
- "bytes obtained from the environment can be converted to Unicode strings\n"
- "by calling Encode::encode(locale => $bytes) and converted back again\n"
- "with Encode::decode(locale => $string)."
- msgstr ""
- #: gnu/packages/web.scm:3171
- msgid "Syndication feed auto-discovery"
- msgstr ""
- #: gnu/packages/web.scm:3172
- msgid ""
- "@code{Feed::Find} implements feed auto-discovery for finding\n"
- "syndication feeds, given a URI. It will discover the following feed formats:\n"
- "RSS 0.91, RSS 1.0, RSS 2.0, Atom."
- msgstr ""
- #: gnu/packages/web.scm:3193
- msgid "Perl directory listing parser"
- msgstr ""
- #: gnu/packages/web.scm:3195
- msgid ""
- "The File::Listing module exports a single function called parse_dir(),\n"
- "which can be used to parse directory listings."
- msgstr ""
- #: gnu/packages/web.scm:3226
- msgid "Stock and mutual fund quotes"
- msgstr ""
- #: gnu/packages/web.scm:3228
- msgid ""
- "Finance::Quote gets stock quotes from various internet sources, including\n"
- "Yahoo! Finance, Fidelity Investments, and the Australian Stock Exchange."
- msgstr ""
- #: gnu/packages/web.scm:3250
- msgid "Perl extension providing access to the GSSAPIv2 library"
- msgstr ""
- #: gnu/packages/web.scm:3251
- msgid ""
- "This is a Perl extension for using GSSAPI C bindings as\n"
- "described in RFC 2744."
- msgstr ""
- #: gnu/packages/web.scm:3271
- msgid "Manipulate tables of HTML::Element"
- msgstr ""
- #: gnu/packages/web.scm:3273
- msgid ""
- "HTML::Element::Extended is a Perl extension for manipulating a table\n"
- "composed of HTML::Element style components."
- msgstr ""
- #: gnu/packages/web.scm:3293
- msgid "Perl class representing an HTML form element"
- msgstr ""
- #: gnu/packages/web.scm:3294
- msgid ""
- "Objects of the HTML::Form class represents a single HTML\n"
- "<form> ... </form> instance."
- msgstr ""
- #: gnu/packages/web.scm:3325
- msgid "Perl extension for scrubbing/sanitizing html"
- msgstr ""
- #: gnu/packages/web.scm:3327
- msgid "@code{HTML::Scrubber} Perl extension for scrubbing/sanitizing HTML."
- msgstr ""
- #: gnu/packages/web.scm:3345
- msgid "Check for HTML errors in a string or file"
- msgstr ""
- #: gnu/packages/web.scm:3346
- msgid ""
- "HTML::Lint is a pure-Perl HTML parser and checker for\n"
- "syntactic legitmacy."
- msgstr ""
- #: gnu/packages/web.scm:3366
- msgid "Extract contents from HTML tables"
- msgstr ""
- #: gnu/packages/web.scm:3368
- msgid ""
- "HTML::TableExtract is a Perl module for extracting the content contained\n"
- "in tables within an HTML document, either as text or encoded element trees."
- msgstr ""
- #: gnu/packages/web.scm:3390
- msgid "Work with HTML in a DOM-like tree structure"
- msgstr ""
- #: gnu/packages/web.scm:3391
- msgid ""
- "This distribution contains a suite of modules for\n"
- "representing, creating, and extracting information from HTML syntax trees."
- msgstr ""
- #: gnu/packages/web.scm:3411
- msgid "Perl HTML parser class"
- msgstr ""
- #: gnu/packages/web.scm:3413
- msgid ""
- "Objects of the HTML::Parser class will recognize markup and separate\n"
- "it from plain text (alias data content) in HTML documents. As different\n"
- "kinds of markup and text are recognized, the corresponding event handlers\n"
- "are invoked."
- msgstr ""
- #: gnu/packages/web.scm:3433
- msgid "Perl data tables useful in parsing HTML"
- msgstr ""
- #: gnu/packages/web.scm:3435
- msgid ""
- "The HTML::Tagset module contains several data tables useful in various\n"
- "kinds of HTML parsing operations."
- msgstr ""
- #: gnu/packages/web.scm:3454
- msgid "HTML-like templates"
- msgstr ""
- #: gnu/packages/web.scm:3456
- msgid ""
- "This module attempts to make using HTML templates simple and natural.\n"
- "It extends standard HTML with a few new HTML-esque tags: @code{<TMPL_VAR>},\n"
- "@code{<TMPL_LOOP>}, @code{<TMPL_INCLUDE>}, @code{<TMPL_IF>},\n"
- "@code{<TMPL_ELSE>} and @code{<TMPL_UNLESS>}. The file written with HTML and\n"
- "these new tags is called a template. Using this module you fill in the values\n"
- "for the variables, loops and branches declared in the template. This allows\n"
- "you to separate design from the data."
- msgstr ""
- #: gnu/packages/web.scm:3483
- msgid "HTTP Body Parser"
- msgstr ""
- #: gnu/packages/web.scm:3484
- msgid ""
- "HTTP::Body parses chunks of HTTP POST data and supports\n"
- "application/octet-stream, application/json, application/x-www-form-urlencoded,\n"
- "and multipart/form-data."
- msgstr ""
- #: gnu/packages/web.scm:3506
- msgid "Minimalist HTTP user agent cookie jar"
- msgstr ""
- #: gnu/packages/web.scm:3507
- msgid ""
- "This module implements a minimalist HTTP user agent cookie\n"
- "jar in conformance with RFC 6265 <http://tools.ietf.org/html/rfc6265>."
- msgstr ""
- #: gnu/packages/web.scm:3527
- msgid "Perl HTTP cookie jars"
- msgstr ""
- #: gnu/packages/web.scm:3529
- msgid ""
- "The HTTP::Cookies class is for objects that represent a cookie jar,\n"
- "that is, a database of all the HTTP cookies that a given LWP::UserAgent\n"
- "object knows about."
- msgstr ""
- #: gnu/packages/web.scm:3550
- msgid "Perl simple http server class"
- msgstr ""
- #: gnu/packages/web.scm:3552
- msgid ""
- "Instances of the HTTP::Daemon class are HTTP/1.1 servers that listen\n"
- "on a socket for incoming requests. The HTTP::Daemon is a subclass of\n"
- "IO::Socket::INET, so you can perform socket operations directly on it too."
- msgstr ""
- #: gnu/packages/web.scm:3571
- msgid "Perl date conversion routines"
- msgstr ""
- #: gnu/packages/web.scm:3573
- msgid ""
- "The HTTP::Date module provides functions that deal with date formats\n"
- "used by the HTTP protocol (and then some more)."
- msgstr ""
- #: gnu/packages/web.scm:3593
- msgid "Lightweight HTTP implementation"
- msgstr ""
- #: gnu/packages/web.scm:3594
- msgid ""
- "@code{HTTP::Lite} is a stand-alone lightweight\n"
- "HTTP/1.1 implementation for perl. It is intended for use in\n"
- "situations where it is desirable to install the minimal number of\n"
- "modules to achieve HTTP support. @code{HTTP::Lite} is ideal for\n"
- "CGI (or mod_perl) programs or for bundling for redistribution with\n"
- "larger packages where only HTTP GET and POST functionality are\n"
- "necessary. @code{HTTP::Lite} is compliant with the Host header,\n"
- "necessary for name based virtual hosting, and supports proxies.\n"
- "Additionally, @code{HTTP::Lite} supports a callback to allow\n"
- "processing of request data as it arrives."
- msgstr ""
- #: gnu/packages/web.scm:3625
- msgid "Perl HTTP style message"
- msgstr ""
- #: gnu/packages/web.scm:3627
- msgid "An HTTP::Message object contains some headers and a content body."
- msgstr ""
- #: gnu/packages/web.scm:3646
- msgid "Perl http content negotiation"
- msgstr ""
- #: gnu/packages/web.scm:3648
- msgid ""
- "The HTTP::Negotiate module provides a complete implementation of the\n"
- "HTTP content negotiation algorithm specified in\n"
- "draft-ietf-http-v11-spec-00.ps chapter 12. Content negotiation allows for\n"
- "the selection of a preferred content representation based upon attributes\n"
- "of the negotiable variants and the value of the various Accept* header\n"
- "fields in the request."
- msgstr ""
- #: gnu/packages/web.scm:3672
- msgid "Parse HTTP/1.1 requests"
- msgstr ""
- #: gnu/packages/web.scm:3673
- msgid ""
- "This is an HTTP request parser. It takes chunks of text as\n"
- "received and returns a @code{hint} as to what is required, or returns the\n"
- "HTTP::Request when a complete request has been read. HTTP/1.1 chunking is\n"
- "supported."
- msgstr ""
- #: gnu/packages/web.scm:3695
- msgid "Fast HTTP request parser"
- msgstr ""
- #: gnu/packages/web.scm:3696
- msgid ""
- "HTTP::Parser::XS is a fast, primitive HTTP request/response\n"
- "parser."
- msgstr ""
- #: gnu/packages/web.scm:3716
- msgid "Set up a CGI environment from an HTTP::Request"
- msgstr ""
- #: gnu/packages/web.scm:3717
- msgid ""
- "This module provides a convenient way to set up a CGI\n"
- "environment from an HTTP::Request."
- msgstr ""
- #: gnu/packages/web.scm:3750
- msgid "Lightweight HTTP server"
- msgstr ""
- #: gnu/packages/web.scm:3751
- msgid ""
- "HTTP::Server::Simple is a simple standalone HTTP daemon with\n"
- "no non-core module dependencies. It can be used for building a standalone\n"
- "http-based UI to your existing tools."
- msgstr ""
- #: gnu/packages/web.scm:3773
- msgid "HTTP/1.1 client"
- msgstr ""
- #: gnu/packages/web.scm:3774
- msgid ""
- "This is a very simple HTTP/1.1 client, designed for doing\n"
- "simple requests without the overhead of a large framework like LWP::UserAgent.\n"
- "It supports proxies and redirection. It also correctly resumes after EINTR."
- msgstr ""
- #: gnu/packages/web.scm:3797
- msgid "@code{HTTP::Tiny} compatible HTTP client wrappers"
- msgstr ""
- #: gnu/packages/web.scm:3799
- msgid ""
- "@code{HTTP::Tinyish} is a wrapper module for @acronym{LWP,libwww-perl},\n"
- "@code{HTTP::Tiny}, curl and wget.\n"
- "\n"
- "It provides an API compatible to HTTP::Tiny."
- msgstr ""
- #: gnu/packages/web.scm:3819
- msgid "Perl module to open an HTML file with automatic charset detection"
- msgstr ""
- #: gnu/packages/web.scm:3821
- msgid ""
- "IO::HTML provides an easy way to open a file containing HTML while\n"
- "automatically determining its encoding. It uses the HTML5 encoding sniffing\n"
- "algorithm specified in section 8.2.2.1 of the draft standard."
- msgstr ""
- #: gnu/packages/web.scm:3840
- msgid "Family-neutral IP socket supporting both IPv4 and IPv6"
- msgstr ""
- #: gnu/packages/web.scm:3841
- msgid ""
- "This module provides a protocol-independent way to use IPv4\n"
- "and IPv6 sockets, intended as a replacement for IO::Socket::INET."
- msgstr ""
- #: gnu/packages/web.scm:3861
- msgid "Nearly transparent SSL encapsulation for IO::Socket::INET"
- msgstr ""
- #: gnu/packages/web.scm:3863
- msgid ""
- "IO::Socket::SSL makes using SSL/TLS much easier by wrapping the\n"
- "necessary functionality into the familiar IO::Socket interface and providing\n"
- "secure defaults whenever possible. This way existing applications can be made\n"
- "SSL-aware without much effort, at least if you do blocking I/O and don't use\n"
- "select or poll."
- msgstr ""
- #: gnu/packages/web.scm:3900
- msgid "Perl modules for the WWW"
- msgstr ""
- #: gnu/packages/web.scm:3902
- msgid ""
- "The libwww-perl collection is a set of Perl modules which provides a\n"
- "simple and consistent application programming interface to the\n"
- "World-Wide Web. The main focus of the library is to provide classes\n"
- "and functions that allow you to write WWW clients. The library also\n"
- "contains modules that are of more general use and even classes that\n"
- "help you implement simple HTTP servers."
- msgstr ""
- #: gnu/packages/web.scm:3929
- msgid "Checks whether your process has access to the web"
- msgstr ""
- #: gnu/packages/web.scm:3930
- msgid ""
- "This module attempts to answer, as accurately as it can, one\n"
- "of the nastiest technical questions there is: am I on the internet?\n"
- "\n"
- "A host of networking and security issues make this problem very difficult.\n"
- "There are firewalls, proxies (both well behaved and badly behaved). We might\n"
- "not have DNS. We might not have a network card at all!"
- msgstr ""
- #: gnu/packages/web.scm:3954
- msgid "Perl module to guess the media type for a file or a URL"
- msgstr ""
- #: gnu/packages/web.scm:3956
- #, scheme-format
- msgid ""
- "The LWP::MediaTypes module provides functions for handling media (also\n"
- "known as MIME) types and encodings. The mapping from file extensions to\n"
- "media types is defined by the media.types file. If the ~/.media.types file\n"
- "exists it is used instead."
- msgstr ""
- #: gnu/packages/web.scm:3980
- msgid "HTTPS support for LWP::UserAgent"
- msgstr ""
- #: gnu/packages/web.scm:3981
- msgid ""
- "The LWP::Protocol::https module provides support for using\n"
- "https schemed URLs with LWP."
- msgstr ""
- #: gnu/packages/web.scm:4001
- msgid "Simple caching for LWP::UserAgent"
- msgstr ""
- #: gnu/packages/web.scm:4002
- msgid ""
- "LWP::UserAgent::Cached is an LWP::UserAgent subclass with\n"
- "cache support. It returns responses from the local file system, if available,\n"
- "instead of making an HTTP request."
- msgstr ""
- #: gnu/packages/web.scm:4023
- msgid "Virtual browser that retries errors"
- msgstr ""
- #: gnu/packages/web.scm:4024
- msgid ""
- "LWP::UserAgent::Determined works just like LWP::UserAgent,\n"
- "except that when you use it to get a web page but run into a\n"
- "possibly-temporary error (like a DNS lookup timeout), it'll wait a few seconds\n"
- "and retry a few times."
- msgstr ""
- #: gnu/packages/web.scm:4050
- msgid "Security enhanced subclass of LWP::UserAgent"
- msgstr ""
- #: gnu/packages/web.scm:4051
- msgid ""
- "@code{LWPx::ParanoidAgent} is a class subclassing\n"
- "@code{LWP::UserAgent} but paranoid against attackers. Its purpose is\n"
- "to vet requests for a remote resource on behalf of a possibly\n"
- "malicious user. The class can do the same as @code{LWP::UserAgent},\n"
- "except that proxy support has been removed. Support for URI schemes\n"
- "is limited to http and https."
- msgstr ""
- #: gnu/packages/web.scm:4096
- msgid "Perl interface to Amazon S3"
- msgstr ""
- #: gnu/packages/web.scm:4097
- msgid "This module provides a Perlish interface to Amazon S3."
- msgstr ""
- #: gnu/packages/web.scm:4116
- msgid "Perl low-level HTTP connection (client)"
- msgstr ""
- #: gnu/packages/web.scm:4118
- msgid ""
- "The Net::HTTP class is a low-level HTTP client. An instance of the\n"
- "Net::HTTP class represents a connection to an HTTP server. The HTTP protocol\n"
- "is described in RFC 2616. The Net::HTTP class supports HTTP/1.0 and\n"
- "HTTP/1.1."
- msgstr ""
- #: gnu/packages/web.scm:4138
- msgid "Extensible Perl server engine"
- msgstr ""
- #: gnu/packages/web.scm:4139
- msgid ""
- "Net::Server is an extensible, generic Perl server engine.\n"
- "It attempts to be a generic server as in Net::Daemon and NetServer::Generic.\n"
- "It includes with it the ability to run as an inetd\n"
- "process (Net::Server::INET), a single connection server (Net::Server or\n"
- "Net::Server::Single), a forking server (Net::Server::Fork), a preforking\n"
- "server which maintains a constant number of preforked\n"
- "children (Net::Server::PreForkSimple), or as a managed preforking server which\n"
- "maintains the number of children based on server load (Net::Server::PreFork).\n"
- "In all but the inetd type, the server provides the ability to connect to one\n"
- "or to multiple server ports."
- msgstr ""
- #: gnu/packages/web.scm:4167
- msgid "SSL support for Net::SMTP"
- msgstr ""
- #: gnu/packages/web.scm:4168
- msgid "SSL support for Net::SMTP."
- msgstr ""
- #: gnu/packages/web.scm:4201
- msgid "Perl Superglue for Web frameworks and servers (PSGI toolkit)"
- msgstr ""
- #: gnu/packages/web.scm:4202
- msgid ""
- "Plack is a set of tools for using the PSGI stack. It\n"
- "contains middleware components, a reference server, and utilities for Web\n"
- "application frameworks. Plack is like Ruby's Rack or Python's Paste for\n"
- "WSGI."
- msgstr ""
- #: gnu/packages/web.scm:4227
- msgid "Compress response body with Gzip or Deflate"
- msgstr ""
- #: gnu/packages/web.scm:4229
- msgid ""
- "Plack::Middleware::Deflater is a middleware to encode your response body\n"
- "in gzip or deflate, based on \"Accept-Encoding\" HTTP request header. It\n"
- "would save the bandwidth a little bit but should increase the Plack server\n"
- "load, so ideally you should handle this on the frontend reverse proxy\n"
- "servers."
- msgstr ""
- #: gnu/packages/web.scm:4255
- msgid "Plack::Middleware which sets body for redirect response"
- msgstr ""
- #: gnu/packages/web.scm:4256
- msgid ""
- "This module sets the body in redirect response, if it's not\n"
- "already set."
- msgstr ""
- #: gnu/packages/web.scm:4278
- msgid "Override REST methods to Plack apps via POST"
- msgstr ""
- #: gnu/packages/web.scm:4279
- msgid ""
- "This middleware allows for POST requests that pretend to be\n"
- "something else: by adding either a header named X-HTTP-Method-Override to the\n"
- "request, or a query parameter named x-tunneled-method to the URI, the client\n"
- "can say what method it actually meant."
- msgstr ""
- #: gnu/packages/web.scm:4302
- msgid "Plack::Middleware which removes body for HTTP response"
- msgstr ""
- #: gnu/packages/web.scm:4303
- msgid ""
- "This module removes the body in an HTTP response if it's not\n"
- "required."
- msgstr ""
- #: gnu/packages/web.scm:4325
- msgid "Supports app to run as a reverse proxy backend"
- msgstr ""
- #: gnu/packages/web.scm:4326
- msgid ""
- "Plack::Middleware::ReverseProxy resets some HTTP headers,\n"
- "which are changed by reverse-proxy. You can specify the reverse proxy address\n"
- "and stop fake requests using @code{enable_if} directive in your app.psgi."
- msgstr ""
- #: gnu/packages/web.scm:4346
- msgid "Run HTTP tests on external live servers"
- msgstr ""
- #: gnu/packages/web.scm:4347
- msgid ""
- "This module allows your to run your Plack::Test tests\n"
- "against an external server instead of just against a local application through\n"
- "either mocked HTTP or a locally spawned server."
- msgstr ""
- #: gnu/packages/web.scm:4368
- msgid "Testing TCP programs"
- msgstr ""
- #: gnu/packages/web.scm:4369
- msgid "Test::TCP is test utilities for TCP/IP programs."
- msgstr ""
- #: gnu/packages/web.scm:4393
- msgid "Testing-specific WWW::Mechanize subclass"
- msgstr ""
- #: gnu/packages/web.scm:4394
- msgid ""
- "Test::WWW::Mechanize is a subclass of the Perl module\n"
- "WWW::Mechanize that incorporates features for web application testing."
- msgstr ""
- #: gnu/packages/web.scm:4426
- msgid "Test::WWW::Mechanize for Catalyst"
- msgstr ""
- #: gnu/packages/web.scm:4427
- msgid ""
- "The Test::WWW::Mechanize::Catalyst module meshes the\n"
- "Test::WWW:Mechanize module and the Catalyst web application framework to allow\n"
- "testing of Catalyst applications without needing to start up a web server."
- msgstr ""
- #: gnu/packages/web.scm:4450
- msgid "Test PSGI programs using WWW::Mechanize"
- msgstr ""
- #: gnu/packages/web.scm:4451
- msgid ""
- "PSGI is a specification to decouple web server environments\n"
- "from web application framework code. Test::WWW::Mechanize is a subclass of\n"
- "WWW::Mechanize that incorporates features for web application testing. The\n"
- "Test::WWW::Mechanize::PSGI module meshes the two to allow easy testing of PSGI\n"
- "applications."
- msgstr ""
- #: gnu/packages/web.scm:4474
- msgid "Perl Uniform Resource Identifiers (absolute and relative)"
- msgstr ""
- #: gnu/packages/web.scm:4476
- msgid ""
- "The URI module implements the URI class. Objects of this class\n"
- "represent \"Uniform Resource Identifier references\" as specified in RFC 2396\n"
- "and updated by RFC 2732."
- msgstr ""
- #: gnu/packages/web.scm:4498
- msgid "Smart URI fetching/caching"
- msgstr ""
- #: gnu/packages/web.scm:4499
- msgid ""
- "@code{URI::Fetch} is a smart client for fetching HTTP pages,\n"
- "notably syndication feeds (RSS, Atom, and others), in an intelligent, bandwidth-\n"
- "and time-saving way."
- msgstr ""
- #: gnu/packages/web.scm:4522
- msgid "Find URIs in arbitrary text"
- msgstr ""
- #: gnu/packages/web.scm:4523
- msgid ""
- "This module finds URIs and URLs (according to what URI.pm\n"
- "considers a URI) in plain text. It only finds URIs which include a\n"
- "scheme (http:// or the like), for something a bit less strict, consider\n"
- "URI::Find::Schemeless. For a command-line interface, urifind is provided."
- msgstr ""
- #: gnu/packages/web.scm:4545
- msgid "WebSocket support for URI package"
- msgstr ""
- #: gnu/packages/web.scm:4546
- msgid ""
- "With this module, the URI package provides the same set of\n"
- "methods for WebSocket URIs as it does for HTTP URIs."
- msgstr ""
- #: gnu/packages/web.scm:4568
- msgid "Object for handling URI templates"
- msgstr ""
- #: gnu/packages/web.scm:4569
- msgid ""
- "This perl module provides a wrapper around URI templates as described in\n"
- "RFC 6570."
- msgstr ""
- #: gnu/packages/web.scm:4601
- msgid "Perl extension interface for libcurl"
- msgstr ""
- #: gnu/packages/web.scm:4603
- msgid ""
- "This is a Perl extension interface for the libcurl file downloading\n"
- "library."
- msgstr ""
- #: gnu/packages/web.scm:4633
- msgid "Web browsing in a Perl object"
- msgstr ""
- #: gnu/packages/web.scm:4634
- msgid ""
- "WWW::Mechanize is a Perl module for stateful programmatic\n"
- "web browsing, used for automating interaction with websites."
- msgstr ""
- #: gnu/packages/web.scm:4670
- msgid "Search A9 OpenSearch compatible engines"
- msgstr ""
- #: gnu/packages/web.scm:4672
- msgid ""
- "@code{WWW::OpenSearch} is a module to search @url{A9's OpenSearch,\n"
- "http://opensearch.a9.com} compatible search engines."
- msgstr ""
- #: gnu/packages/web.scm:4692
- msgid "Perl database of robots.txt-derived permissions"
- msgstr ""
- #: gnu/packages/web.scm:4694
- msgid ""
- "The WWW::RobotRules module parses /robots.txt files as specified in\n"
- "\"A Standard for Robot Exclusion\", at\n"
- "<http://www.robotstxt.org/wc/norobots.html>. Webmasters can use the\n"
- "/robots.txt file to forbid conforming robots from accessing parts of\n"
- "their web site."
- msgstr ""
- #: gnu/packages/web.scm:4723
- msgid "Parse feeds in Python"
- msgstr ""
- #: gnu/packages/web.scm:4725
- msgid ""
- "Universal feed parser which handles RSS 0.9x, RSS 1.0, RSS 2.0,\n"
- "CDF, Atom 0.3, and Atom 1.0 feeds."
- msgstr ""
- #: gnu/packages/web.scm:4822
- msgid "Store and provide data about GNU Guix"
- msgstr ""
- #: gnu/packages/web.scm:4824
- msgid ""
- "The Guix Data Service stores data about GNU Guix, and provides this\n"
- "through a web interface. It supports listening to the guix-commits mailing\n"
- "list to find out about new revisions, then loads the data from these in to a\n"
- "PostgreSQL database."
- msgstr ""
- #: gnu/packages/web.scm:4851
- msgid "HTML5 parsing library"
- msgstr ""
- #: gnu/packages/web.scm:4853
- msgid ""
- "Gumbo is an implementation of the HTML5 parsing algorithm implemented as\n"
- "a pure C99 library."
- msgstr ""
- #: gnu/packages/web.scm:4924
- msgid "Application container server"
- msgstr ""
- #: gnu/packages/web.scm:4926
- msgid ""
- "uWSGI presents a complete stack for networked/clustered web applications,\n"
- "implementing message/object passing, caching, RPC and process management.\n"
- "It uses the uwsgi protocol for all the networking/interprocess communications."
- msgstr ""
- #: gnu/packages/web.scm:4962
- msgid "Command-line JSON processor"
- msgstr ""
- #: gnu/packages/web.scm:4963
- msgid ""
- "jq is like sed for JSON data – you can use it to slice and\n"
- "filter and map and transform structured data with the same ease that sed, awk,\n"
- "grep and friends let you play with text. It is written in portable C. jq can\n"
- "mangle the data format that you have into the one that you want with very\n"
- "little effort, and the program to do so is often shorter and simpler than\n"
- "you'd expect."
- msgstr ""
- #: gnu/packages/web.scm:4988
- msgid "Efficient time formatting library (strftime, strptime) for Golang"
- msgstr ""
- #: gnu/packages/web.scm:4990
- msgid ""
- "@code{timefmt-go} is a Go language package for formatting and parsing date\n"
- "time strings."
- msgstr ""
- #: gnu/packages/web.scm:5019
- msgid "Pure Go implementation of jq"
- msgstr ""
- #: gnu/packages/web.scm:5021
- msgid ""
- "@command{gojq} is an Go implementation and library of the jq JSON\n"
- "processor."
- msgstr ""
- #: gnu/packages/web.scm:5053
- msgid "Parse HTML at the command line"
- msgstr ""
- #: gnu/packages/web.scm:5055
- msgid ""
- "@command{pup} is a command line tool for processing HTML. It reads\n"
- "from stdin, prints to stdout, and allows the user to filter parts of the page\n"
- "using CSS selectors. Inspired by @command{jq}, @command{pup} aims to be a\n"
- "fast and flexible way of exploring HTML from the terminal."
- msgstr ""
- #: gnu/packages/web.scm:5086
- msgid "Library for mocking web service APIs which use HTTP or HTTPS"
- msgstr ""
- #: gnu/packages/web.scm:5088
- msgid ""
- "Uhttpmock is a project for mocking web service APIs which use HTTP or\n"
- "HTTPS. It provides a library, libuhttpmock, which implements recording and\n"
- "playback of HTTP request/response traces."
- msgstr ""
- #: gnu/packages/web.scm:5123
- msgid "Single file web server"
- msgstr ""
- #: gnu/packages/web.scm:5124
- msgid ""
- "Woof (Web Offer One File) is a small simple web server that\n"
- "can easily be invoked on a single file. Your partner can access the file with\n"
- "tools they trust (e.g. wget)."
- msgstr ""
- #: gnu/packages/web.scm:5150
- msgid "Build system for the Netsurf project"
- msgstr ""
- #: gnu/packages/web.scm:5152
- msgid ""
- "This package provides the shared build system for Netsurf project\n"
- "libraries."
- msgstr ""
- #: gnu/packages/web.scm:5185
- msgid "Parser building library"
- msgstr ""
- #: gnu/packages/web.scm:5187
- msgid ""
- "LibParserUtils is a library for building efficient parsers, written in\n"
- "C. It is developed as part of the NetSurf project."
- msgstr ""
- #: gnu/packages/web.scm:5215
- msgid "HTML5 compliant parsing library"
- msgstr ""
- #: gnu/packages/web.scm:5217
- msgid ""
- "Hubbub is an HTML5 compliant parsing library, written in C, which can\n"
- "parse both valid and invalid web content. It is developed as part of the\n"
- "NetSurf project."
- msgstr ""
- #: gnu/packages/web.scm:5342
- msgid "Wiki compiler, capable of generating HTML"
- msgstr ""
- #: gnu/packages/web.scm:5344
- msgid ""
- "Ikiwiki is a wiki compiler, capable of generating a static set of web\n"
- "pages, but also incorporating dynamic features like a web based editor and\n"
- "commenting."
- msgstr ""
- #: gnu/packages/web.scm:5366
- msgid "String internment library"
- msgstr ""
- #: gnu/packages/web.scm:5368
- msgid ""
- "LibWapcaplet provides a reference counted string internment system\n"
- "designed to store small strings and allow rapid comparison of them. It is\n"
- "developed as part of the Netsurf project."
- msgstr ""
- #: gnu/packages/web.scm:5398
- msgid "CSS parser and selection library"
- msgstr ""
- #: gnu/packages/web.scm:5400
- msgid ""
- "LibCSS is a CSS (Cascading Style Sheet) parser and selection engine,\n"
- "written in C. It is developed as part of the NetSurf project."
- msgstr ""
- #: gnu/packages/web.scm:5433
- msgid "Implementation of the W3C DOM"
- msgstr ""
- #: gnu/packages/web.scm:5435
- msgid ""
- "LibDOM is an implementation of the W3C DOM, written in C. It is\n"
- "developed as part of the NetSurf project."
- msgstr ""
- #: gnu/packages/web.scm:5460
- msgid "Library for parsing SVG files"
- msgstr ""
- #: gnu/packages/web.scm:5462
- msgid ""
- "Libsvgtiny takes some SVG as input and returns a list of paths and texts\n"
- "which can be rendered easily, as defined in\n"
- "@url{http://www.w3.org/TR/SVGMobile/}. It is developed as part of the NetSurf\n"
- "project."
- msgstr ""
- #: gnu/packages/web.scm:5485
- msgid "Decoding library for BMP and ICO files"
- msgstr ""
- #: gnu/packages/web.scm:5487
- msgid ""
- "Libnsbmp is a decoding library for BMP and ICO image file formats,\n"
- "written in C. It is developed as part of the NetSurf project."
- msgstr ""
- #: gnu/packages/web.scm:5508
- msgid "Decoding library for GIF files"
- msgstr ""
- #: gnu/packages/web.scm:5510
- msgid ""
- "Libnsgif is a decoding library for the GIF image file format, written in\n"
- "C. It is developed as part of the NetSurf project."
- msgstr ""
- #: gnu/packages/web.scm:5535
- msgid "Logging library"
- msgstr ""
- #: gnu/packages/web.scm:5537
- msgid ""
- "Libnslog provides a category-based logging library which supports\n"
- "complex logging filters, multiple log levels, and provides context through to\n"
- "client applications. It is developed as part of the NetSurf project."
- msgstr ""
- #: gnu/packages/web.scm:5559
- msgid "Utility library for NetSurf"
- msgstr ""
- #: gnu/packages/web.scm:5561
- msgid ""
- "Libnsutils provides a small number of useful utility routines. It is\n"
- "developed as part of the NetSurf project."
- msgstr ""
- #: gnu/packages/web.scm:5582
- msgid "Library to generate a static Public Suffix List"
- msgstr ""
- #: gnu/packages/web.scm:5584
- msgid ""
- "Libnspsl is a library to generate a static code representation of the\n"
- "Public Suffix List. It is developed as part of the NetSurf project."
- msgstr ""
- #: gnu/packages/web.scm:5608
- msgid "Generate JavaScript to DOM bindings"
- msgstr ""
- #: gnu/packages/web.scm:5610
- msgid ""
- "@code{nsgenbind} is a tool to generate JavaScript to DOM bindings from\n"
- "w3c webidl files and a binding configuration file."
- msgstr ""
- #: gnu/packages/web.scm:5737
- msgid "Web browser"
- msgstr ""
- #: gnu/packages/web.scm:5739
- msgid ""
- "NetSurf is a lightweight web browser that has its own layout and\n"
- "rendering engine entirely written from scratch. It is small and capable of\n"
- "handling many of the web standards in use today."
- msgstr ""
- #: gnu/packages/web.scm:5777
- msgid "Unix command line interface to the www"
- msgstr ""
- #: gnu/packages/web.scm:5778
- msgid ""
- "Surfraw (Shell Users' Revolutionary Front Rage Against the Web)\n"
- "provides a unix command line interface to a variety of popular www search engines\n"
- "and similar services."
- msgstr ""
- #: gnu/packages/web.scm:5810
- msgid "Simple static web server"
- msgstr ""
- #: gnu/packages/web.scm:5811
- msgid ""
- "darkhttpd is a simple static web server. It is\n"
- "standalone and does not need inetd or ucspi-tcp. It does not need any\n"
- "config files---you only have to specify the www root."
- msgstr ""
- #: gnu/packages/web.scm:5840
- msgid "Analyze Web server logs in real time"
- msgstr ""
- #: gnu/packages/web.scm:5842
- msgid ""
- "GoAccess is a real-time web log analyzer and interactive viewer that\n"
- "runs in a terminal or through your browser. It provides fast and valuable\n"
- "HTTP statistics for system administrators that require a visual server report\n"
- "on the fly."
- msgstr ""
- #: gnu/packages/web.scm:5894
- msgid "Scalable TLS proxy"
- msgstr ""
- #: gnu/packages/web.scm:5896
- msgid ""
- "Hitch is a performant TLS proxy based on @code{libev}. It terminates\n"
- "SSL/TLS connections and forwards the unencrypted traffic to a backend such\n"
- "as a web server. It is designed to handle many thousand connections on\n"
- "multicore machines."
- msgstr ""
- #: gnu/packages/web.scm:5932
- msgid "Tunnel data connections through HTTP requests"
- msgstr ""
- #: gnu/packages/web.scm:5933
- msgid ""
- "httptunnel creates a bidirectional virtual data connection\n"
- "tunnelled through HTTP (HyperText Transfer Protocol) requests. This can be\n"
- "useful for users behind restrictive firewalls. As long as Web traffic is\n"
- "allowed, even through a HTTP-only proxy, httptunnel can be combined with other\n"
- "tools like SSH (Secure Shell) to reach the outside world."
- msgstr ""
- #: gnu/packages/web.scm:5979
- msgid "TLS proxy for clients or servers"
- msgstr ""
- #: gnu/packages/web.scm:5980
- msgid ""
- "Stunnel is a proxy designed to add TLS encryption\n"
- "functionality to existing clients and servers without any changes in the\n"
- "programs' code. Its architecture is optimized for security, portability, and\n"
- "scalability (including load-balancing), making it suitable for large\n"
- "deployments."
- msgstr ""
- #: gnu/packages/web.scm:6052
- msgid "Web application accelerator"
- msgstr ""
- #: gnu/packages/web.scm:6054
- msgid ""
- "Varnish is a high-performance HTTP accelerator. It acts as a caching\n"
- "reverse proxy and load balancer. You install it in front of any server that\n"
- "speaks HTTP and configure it to cache the contents through an extensive\n"
- "configuration language."
- msgstr ""
- #: gnu/packages/web.scm:6088
- msgid "Collection of Varnish modules"
- msgstr ""
- #: gnu/packages/web.scm:6090
- msgid ""
- "This package provides a collection of modules (@dfn{vmods}) for the Varnish\n"
- "cache server, extending the @acronym{VCL, Varnish Configuration Language} with\n"
- "additional capabilities."
- msgstr ""
- #: gnu/packages/web.scm:6116
- msgid "Internet services daemon"
- msgstr ""
- #: gnu/packages/web.scm:6117
- msgid ""
- "@code{xinetd}, a more secure replacement for @code{inetd},\n"
- "listens for incoming requests over a network and launches the appropriate\n"
- "service for that request. Requests are made using port numbers as identifiers\n"
- "and xinetd usually launches another daemon to handle the request. It can be\n"
- "used to start services with both privileged and non-privileged port numbers."
- msgstr ""
- #: gnu/packages/web.scm:6162
- msgid "HTML Tidy with HTML5 support"
- msgstr ""
- #: gnu/packages/web.scm:6164
- msgid ""
- "Tidy is a console application which corrects and cleans up\n"
- "HTML and XML documents by fixing markup errors and upgrading\n"
- "legacy code to modern standards.\n"
- "\n"
- "Tidy also provides @code{libtidy}, a C static and dynamic library that\n"
- "developers can integrate into their applications to make use of the\n"
- "functions of Tidy."
- msgstr ""
- #: gnu/packages/web.scm:6227
- msgid "Webserver with focus on security"
- msgstr ""
- #: gnu/packages/web.scm:6229
- msgid ""
- "Hiawatha has been written with security in mind.\n"
- "Features include the ability to stop SQL injections, XSS and CSRF attacks and\n"
- "exploit attempts."
- msgstr ""
- #: gnu/packages/web.scm:6250
- msgid "HTTP request and response service"
- msgstr ""
- #: gnu/packages/web.scm:6251
- msgid ""
- "Testing an HTTP Library can become difficult sometimes.\n"
- "@code{RequestBin} is fantastic for testing POST requests, but doesn't let you control the\n"
- "response. This exists to cover all kinds of HTTP scenarios. All endpoint responses are\n"
- "JSON-encoded."
- msgstr ""
- #: gnu/packages/web.scm:6274
- msgid "Test your HTTP library against a local copy of httpbin"
- msgstr ""
- #: gnu/packages/web.scm:6276
- msgid ""
- "@code{Pytest-httpbin} creates a @code{pytest} fixture that is dependency-injected\n"
- "into your tests. It automatically starts up a HTTP server in a separate thread running\n"
- "@code{httpbin} and provides your test with the URL in the fixture."
- msgstr ""
- #: gnu/packages/web.scm:6342
- msgid "HTTP request/response parser for C"
- msgstr ""
- #: gnu/packages/web.scm:6343
- msgid ""
- "This is a parser for HTTP messages written in C. It\n"
- "parses both requests and responses. The parser is designed to be used in\n"
- "high-performance HTTP applications. It does not make any syscalls nor\n"
- "allocations, it does not buffer data, it can be interrupted at anytime.\n"
- "Depending on your architecture, it only requires about 40 bytes of data per\n"
- "message stream (in a web server that is per connection)."
- msgstr ""
- #: gnu/packages/web.scm:6379
- msgid "HTTP client mock for Python"
- msgstr ""
- #: gnu/packages/web.scm:6380
- msgid ""
- "@code{httpretty} is a helper for faking web requests,\n"
- "inspired by Ruby's @code{fakeweb}."
- msgstr ""
- #: gnu/packages/web.scm:6397
- msgid "Output JSON from a shell"
- msgstr ""
- #: gnu/packages/web.scm:6398
- msgid ""
- "@command{jo} is a command-line utility to create JSON objects\n"
- "or arrays. It creates a JSON string on stdout from words provided as\n"
- "command-line arguments or read from stdin."
- msgstr ""
- #: gnu/packages/web.scm:6456
- msgid "Command-line interface to archive.org"
- msgstr ""
- #: gnu/packages/web.scm:6457
- msgid ""
- "@code{ia} is a command-line tool for using\n"
- "@url{archive.org} from the command-line. It also implements the\n"
- "internetarchive python module for programmatic access to archive.org."
- msgstr ""
- #: gnu/packages/web.scm:6507
- msgid "Search code snippets on @url{https://commandlinefu.com}"
- msgstr ""
- #: gnu/packages/web.scm:6508
- msgid ""
- "@code{clf} is a command line tool for searching code\n"
- "snippets on @url{https://commandlinefu.com}."
- msgstr ""
- #: gnu/packages/web.scm:6542
- msgid "Generate Atom feeds for social networking websites"
- msgstr ""
- #: gnu/packages/web.scm:6543
- msgid ""
- "rss-bridge generates Atom feeds for social networking\n"
- "websites lacking feeds. Supported websites include Facebook, Twitter,\n"
- "Instagram and YouTube."
- msgstr ""
- #: gnu/packages/web.scm:6580
- msgid "Check websites for broken links"
- msgstr ""
- #: gnu/packages/web.scm:6581
- msgid ""
- "LinkChecker is a website validator. It checks for broken\n"
- "links in websites. It is recursive and multithreaded providing output in\n"
- "colored or normal text, HTML, SQL, CSV, XML or as a sitemap graph. It\n"
- "supports checking HTTP/1.1, HTTPS, FTP, mailto, news, nntp, telnet and local\n"
- "file links."
- msgstr ""
- #: gnu/packages/web.scm:6627
- msgid "Graphical client for plain-text protocols"
- msgstr ""
- #: gnu/packages/web.scm:6629
- msgid ""
- "Castor is a graphical client for plain-text protocols written in\n"
- "Rust with GTK. It currently supports the Gemini, Gopher and Finger\n"
- "protocols."
- msgstr ""
- #: gnu/packages/web.scm:6714
- msgid "CGI kit and HTML templating system"
- msgstr ""
- #: gnu/packages/web.scm:6716
- msgid ""
- "This package includes Clearsilver, the CGI kit and HTML templating\n"
- "system."
- msgstr ""
- #: gnu/packages/web.scm:6733
- msgid "Universal Binary JSON encoder/decoder"
- msgstr ""
- #: gnu/packages/web.scm:6735
- msgid ""
- "Py-ubjson is a Python module providing an Universal Binary JSON\n"
- "encoder/decoder based on the draft-12 specification for UBJSON."
- msgstr ""
- #: gnu/packages/web.scm:6828
- msgid ""
- "Java Servlet, JavaServer Pages, Java Expression Language and Java\n"
- "WebSocket"
- msgstr ""
- #: gnu/packages/web.scm:6830
- msgid ""
- "Apache Tomcat is a free implementation of the Java\n"
- "Servlet, JavaServer Pages, Java Expression Language and Java WebSocket\n"
- "technologies."
- msgstr ""
- #: gnu/packages/web.scm:6883
- msgid "Helper classes for jetty tests"
- msgstr ""
- #: gnu/packages/web.scm:6884
- msgid ""
- "This package contains helper classes for testing the Jetty\n"
- "Web Server."
- msgstr ""
- #: gnu/packages/web.scm:6942
- msgid "Utility classes for Jetty"
- msgstr ""
- #: gnu/packages/web.scm:6943
- msgid ""
- "The Jetty Web Server provides an HTTP server and Servlet\n"
- "container capable of serving static and dynamic content either from a standalone\n"
- "or embedded instantiation. This package provides utility classes."
- msgstr ""
- #: gnu/packages/web.scm:7020
- msgid "Jetty :: IO Utility"
- msgstr ""
- #: gnu/packages/web.scm:7021
- msgid ""
- "The Jetty Web Server provides an HTTP server and Servlet\n"
- "container capable of serving static and dynamic content either from a standalone\n"
- "or embedded instantiation. This package provides IO-related utility classes."
- msgstr ""
- #: gnu/packages/web.scm:7065
- msgid "Jetty :: Http Utility"
- msgstr ""
- #: gnu/packages/web.scm:7066
- msgid ""
- "The Jetty Web Server provides an HTTP server and Servlet\n"
- "container capable of serving static and dynamic content either from a standalone\n"
- "or embedded instantiation. This package provides HTTP-related utility classes."
- msgstr ""
- #: gnu/packages/web.scm:7099
- msgid "Jetty :: JMX Management"
- msgstr ""
- #: gnu/packages/web.scm:7100
- msgid ""
- "The Jetty Web Server provides an HTTP server and Servlet\n"
- "container capable of serving static and dynamic content either from a standalone\n"
- "or embedded instantiation. This package provides the JMX management."
- msgstr ""
- #: gnu/packages/web.scm:7185
- msgid "Core jetty server artifact"
- msgstr ""
- #: gnu/packages/web.scm:7186
- msgid ""
- "The Jetty Web Server provides an HTTP server and Servlet\n"
- "container capable of serving static and dynamic content either from a standalone\n"
- "or embedded instantiation. This package provides the core jetty server\n"
- "artifact."
- msgstr ""
- #: gnu/packages/web.scm:7228
- msgid "Jetty security infrastructure"
- msgstr ""
- #: gnu/packages/web.scm:7229
- msgid ""
- "The Jetty Web Server provides an HTTP server and Servlet\n"
- "container capable of serving static and dynamic content either from a standalone\n"
- "or embedded instantiation. This package provides the core jetty security\n"
- "infrastructure"
- msgstr ""
- #: gnu/packages/web.scm:7284
- msgid "Jetty Servlet Container"
- msgstr ""
- #: gnu/packages/web.scm:7285
- msgid ""
- "The Jetty Web Server provides an HTTP server and Servlet\n"
- "container capable of serving static and dynamic content either from a standalone\n"
- "or embedded instantiation. This package provides the core jetty servlet\n"
- "container."
- msgstr ""
- #: gnu/packages/web.scm:7448
- msgid "HTML parser"
- msgstr ""
- #: gnu/packages/web.scm:7449
- msgid ""
- "Jsoup is a Java library for working with real-world HTML. It\n"
- "provides a very convenient API for extracting and manipulating data, using the\n"
- "best of DOM, CSS, and jQuery-like methods."
- msgstr ""
- #: gnu/packages/web.scm:7477
- msgid "Lightweight client-side OAuth library for Java"
- msgstr ""
- #: gnu/packages/web.scm:7478
- msgid ""
- "Signpost is the easy and intuitive solution for signing\n"
- "HTTP messages on the Java platform in conformance with the OAuth Core 1.0a\n"
- "standard. Signpost follows a modular and flexible design, allowing you to\n"
- "combine it with different HTTP messaging layers."
- msgstr ""
- #: gnu/packages/web.scm:7500
- msgid "Validate HTML"
- msgstr ""
- #: gnu/packages/web.scm:7501
- msgid ""
- "Tidyp is a program that can validate your HTML, as well as\n"
- "modify it to be more clean and standard. tidyp does not validate HTML 5.\n"
- "\n"
- "libtidyp is the library on which the program is based. It can be used by any\n"
- "other program that can interface to it. The Perl module @code{HTML::Tidy} is\n"
- "based on this library, allowing Perl programmers to easily validate HTML."
- msgstr ""
- #: gnu/packages/web.scm:7541
- msgid "(X)HTML validation in a Perl object"
- msgstr ""
- #: gnu/packages/web.scm:7542
- msgid ""
- "@code{HTML::Tidy} is an HTML checker in a handy dandy\n"
- "object. It's meant as a replacement for @code{HTML::Lint}, which is written\n"
- "in Perl but is not nearly as capable as @code{HTML::Tidy}."
- msgstr ""
- #: gnu/packages/web.scm:7596
- msgid "Gopher protocol server"
- msgstr ""
- #: gnu/packages/web.scm:7598
- #, scheme-format
- msgid ""
- "Gophernicus is a Gopher protocol server. Its features include:\n"
- "@itemize\n"
- "@item written with security in mind;\n"
- "@item automatically generated Gopher menus;\n"
- "@item gophertags for virtually renaming directories;\n"
- "@item personal gopherspaces, located in @file{~/public_gopher/};\n"
- "@item virtual hosting;\n"
- "@item CGI support;\n"
- "@item output filtering and PHP support;\n"
- "@item charset support and conversions;\n"
- "@item selector rewriting;\n"
- "@item session tracking and statistics;\n"
- "@item TLS/SSL and proxy support.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/web.scm:7636
- msgid "Small Gopher server"
- msgstr ""
- #: gnu/packages/web.scm:7638
- msgid ""
- "Geomyidae is a server for distributed hypertext protocol Gopher. Its\n"
- "features include:\n"
- "\n"
- "@enumerate\n"
- "@item Gopher menus (see @file{index.gph} for an example);\n"
- "@item directory listings (if no @file{index.gph} was found);\n"
- "@item CGI support (@file{.cgi} files are executed);\n"
- "@item search support in CGI files;\n"
- "@item logging with multiple log levels.\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/web.scm:7685
- msgid "Random avatar generator"
- msgstr ""
- #: gnu/packages/web.scm:7686
- msgid ""
- "Cat avatar generator is a generator of cat pictures optimised\n"
- "to generate random avatars, or defined avatar from a \"seed\". This is a\n"
- "derivation by David Revoy from the original MonsterID by Andreas Gohr."
- msgstr ""
- #: gnu/packages/web.scm:7754
- msgid "HTTP/2 protocol client, proxy, server, and library"
- msgstr ""
- #: gnu/packages/web.scm:7756
- msgid ""
- "nghttp2 implements the Hypertext Transfer Protocol, version\n"
- "2 (@dfn{HTTP/2}).\n"
- "\n"
- "A reusable C library provides the HTTP/2 framing layer, with several tools built\n"
- "on top of it:\n"
- "\n"
- "@itemize\n"
- "@item @command{nghttp}, a command-line HTTP/2 client. It exposes many advanced\n"
- "and low-level aspects of the protocol and is useful for debugging.\n"
- "@item @command{nghttpd}, a fast, multi-threaded HTTP/2 static web server that\n"
- "serves files from a local directory.\n"
- "@item @command{nghttpx}, a fast, multi-threaded HTTP/2 reverse proxy that can be\n"
- "deployed in front of existing web servers that don't support HTTP/2.\n"
- "Both @command{nghttpd} and @command{nghttpx} can fall back to HTTP/1.1 for\n"
- "backwards compatibility with clients that don't speak HTTP/2.\n"
- "@item @command{h2load} for benchmarking (only!) your own HTTP/2 servers.\n"
- "@item HTTP/2 uses a header compression method called @dfn{HPACK}.\n"
- "nghttp2 provides a HPACK encoder and decoder as part of its public API.\n"
- "@item @command{deflatehd} converts JSON data or HTTP/1-style header fields to\n"
- "compressed JSON header blocks.\n"
- "@item @command{inflatehd} converts such compressed headers back to JSON pairs.\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/web.scm:7854
- msgid "Web interface for cluster deployments of Guix"
- msgstr ""
- #: gnu/packages/web.scm:7855
- msgid ""
- "Hpcguix-web provides a web interface to the list of packages\n"
- "provided by Guix. The list of packages is searchable and provides\n"
- "instructions on how to use Guix in a shared HPC environment."
- msgstr ""
- #: gnu/packages/web.scm:7899
- msgid "Easy-to-use offline browser utility"
- msgstr ""
- #: gnu/packages/web.scm:7900
- msgid ""
- "HTTrack allows you to download a World Wide Web site from\n"
- "the Internet to a local directory, building recursively all directories,\n"
- "getting HTML, images, and other files from the server to your computer.\n"
- "\n"
- "HTTrack arranges the original site's relative link-structure. Simply open\n"
- "a page of the @emph{mirrored} website in your browser, and you can browse the\n"
- "site from link to link, as if you were viewing it online. HTTrack can also\n"
- "update an existing mirrored site, and resume interrupted downloads.\n"
- "\n"
- "HTTrack is fully configurable, and has an integrated help system."
- msgstr ""
- #: gnu/packages/web.scm:7933
- msgid "Bookmark manager"
- msgstr ""
- #: gnu/packages/web.scm:7935
- msgid ""
- "buku is a powerful bookmark manager written in Python3 and SQLite3.\n"
- "@command{buku} can auto-import bookmarks from your browser and present them\n"
- "in an interactive command-line interface that lets you compose and update\n"
- "bookmarks directly. It can also present them in a web interface with\n"
- "@command{bukuserver}."
- msgstr ""
- #: gnu/packages/web.scm:7977
- msgid "rofi frontend for buku bookmarks manager"
- msgstr ""
- #: gnu/packages/web.scm:7979
- #, fuzzy
- #| msgid "This package provides a frontend to GDB, the GNU debugger."
- msgid "This package provides a rofi frontend for the buku bookmark manager."
- msgstr "이와 같은 꾸러미는 GNU 디버거 GDB에 대한 프론트엔드를 제공합니다."
- #: gnu/packages/web.scm:8007
- msgid "Anonymize IP addresses in log files"
- msgstr ""
- #: gnu/packages/web.scm:8009
- msgid ""
- "Anonip masks the last bits of IPv4 and IPv6 addresses in log files.\n"
- "That way most of the relevant information is preserved, while the IP address\n"
- "does not match a particular individuum anymore.\n"
- "\n"
- "Depending on your Web server, the log entries may be piped to Anonip directly\n"
- "or via a FIFO (named pipe). Thus the unmasked IP addresses will never be\n"
- "written to any file.\n"
- "\n"
- "It's also possible to rewrite existing log files.\n"
- "\n"
- "Anonip can also be uses as a Python module in your own Python application."
- msgstr ""
- #: gnu/packages/web.scm:8042
- msgid "Lightweight asynchronous task execution service"
- msgstr ""
- #: gnu/packages/web.scm:8043
- msgid ""
- "Poussetaches (which literally means \"push tasks\" in\n"
- "French) is a lightweight asynchronous task execution service that aims to\n"
- "replace Celery and RabbitMQ for small Python applications.\n"
- "\n"
- "The app posts base64-encoded payload to poussetaches and specifies the\n"
- "endpoint that will be used to trigger the task. Poussetaches makes HTTP\n"
- "requests with the registered payload until the right status code is\n"
- "returned."
- msgstr ""
- #: gnu/packages/web.scm:8067
- msgid "Simple non-validating CSS1 and HTML parser for C++"
- msgstr ""
- #: gnu/packages/web.scm:8068
- msgid ""
- "htmlcxx is a simple non-validating CSS1 and HTML parser for\n"
- "C++. Although there are several other HTML parsers available, htmlcxx has some\n"
- "characteristics that make it unique:\n"
- "@itemize\n"
- "@item STL like navigation of DOM tree, using excelent's tree.hh library from\n"
- "Kasper Peeters\n"
- "@item It is possible to reproduce exactly, character by character, the original\n"
- "document from the parse tree\n"
- "@item Bundled CSS parser\n"
- "@item Optional parsing of attributes\n"
- "@item C++ code that looks like C++ (not so true anymore)\n"
- "@item Offsets of tags/elements in the original document are stored in the nodes\n"
- "of the DOM tree\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/web.scm:8111
- msgid "HTML/CSS user interface library"
- msgstr ""
- #: gnu/packages/web.scm:8112
- msgid ""
- "libRocket is a C++ user interface package based on the HTML\n"
- "and CSS standards. libRocket uses the open standards XHTML1.0 and\n"
- "CSS2.0 (while borrowing features from HTML5 and CSS3), and extends them with\n"
- "features suited towards real-time applications. It is designed as a complete\n"
- "solution for any project's interface needs:\n"
- "\n"
- "@itemize\n"
- "@item Dynamic layout system.\n"
- "@item Efficient application-wide styling, with a custom-built templating engine.\n"
- "@item Fully featured control set: buttons, sliders, drop-downs, etc.\n"
- "@item Runtime visual debugging suite.\n"
- "@item Easily integrated and extensible with Python or Lua scripting.\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/web.scm:8156
- msgid "Simple and secure Gemini server"
- msgstr ""
- #: gnu/packages/web.scm:8157
- msgid ""
- "@command{gmid} is a fast Gemini server written with security\n"
- "in mind. It has features such as:\n"
- "@itemize\n"
- "@item reload the running configuration without interruption\n"
- "@item automatic redirect/error pages\n"
- "@item IRI support (RFC3987)\n"
- "@item reverse proxying\n"
- "@item CGI and FastCGI support\n"
- "@item virtual hosts\n"
- "@item location rules\n"
- "@item event-based asynchronous I/O model\n"
- "@item low memory footprint.\n"
- "@end itemize"
- msgstr ""
- #: gnu/packages/web.scm:8192
- msgid "HTTP/FTP load tester and benchmarking utility"
- msgstr ""
- #: gnu/packages/web.scm:8194
- msgid ""
- "Siege is a multi-threaded HTTP/FTP load tester and benchmarking utility. It\n"
- "can stress test a single URL with a user defined number of simulated users, or\n"
- "it can read many URLs into memory and stress them simultaneously. The program\n"
- "reports the total number of hits recorded, bytes transferred, response time,\n"
- "concurrency, and return status."
- msgstr ""
- #: gnu/packages/web.scm:8228
- msgid "Simple Gemini protocol server"
- msgstr ""
- #: gnu/packages/web.scm:8229
- msgid "gmnisrv is a simple Gemini protocol server written in C."
- msgstr ""
- #: gnu/packages/web.scm:8268
- msgid "Gemini protocol server"
- msgstr ""
- #: gnu/packages/web.scm:8269
- msgid ""
- "Vger is a Gemini protocol server that supports chroots,\n"
- "virtualhosts, CGI, default language choice, redirections and MIME-type\n"
- "detection. It delegates TLS support to an external daemon, for example\n"
- "@command{stunnel} on @command{inetd}."
- msgstr ""
- #: gnu/packages/web.scm:8302
- msgid "Reference implementation of the ZIM specification"
- msgstr ""
- #: gnu/packages/web.scm:8303
- msgid ""
- "The openZIM project proposes offline storage solutions for\n"
- "content coming from the Web. The zimlib is the standard implementation of the\n"
- "ZIM specification. It is a library which implements the read and write method\n"
- "for ZIM files."
- msgstr ""
- #: gnu/packages/web.scm:8349
- msgid "Common code base for all Kiwix ports"
- msgstr ""
- #: gnu/packages/web.scm:8350
- msgid ""
- "The Kiwix library provides the Kiwix software suite core.\n"
- "It contains the code shared by all Kiwix ports."
- msgstr ""
- #: gnu/packages/web.scm:8403
- msgid "Viewer and manager of ZIM files"
- msgstr ""
- #: gnu/packages/web.scm:8404
- msgid ""
- "Kiwix Desktop allows you to enjoy a lot of different content\n"
- "offline (such as Wikipedia), without any access to Internet."
- msgstr ""
- #: gnu/packages/web.scm:8433
- msgid "Kiwix command line tools"
- msgstr ""
- #: gnu/packages/web.scm:8434
- msgid ""
- "The Kiwix tools are a collection of Kiwix-related command line\n"
- "tools:\n"
- "@itemize\n"
- "@item kiwix-manage: Manage XML based library of ZIM files\n"
- "@item kiwix-read: Read ZIM file content\n"
- "@item kiwix-search: Fulltext search in ZIM files\n"
- "@item kiwix-serve: HTTP daemon serving ZIM files\n"
- "@end itemize\n"
- msgstr ""
- #: gnu/packages/web.scm:8458
- msgid "Strictly RFC 3986 compliant URI parsing and handling library"
- msgstr ""
- #: gnu/packages/web.scm:8459
- msgid ""
- "uriparser is a strictly RFC 3986 compliant URI parsing and\n"
- "handling library written in C89 (\"ANSI C\"). uriparser is fast and supports\n"
- "Unicode."
- msgstr ""
- #: gnu/packages/web.scm:8491
- msgid ""
- "Small and simple HTTP GET/HEAD-only web server for static\n"
- "content"
- msgstr ""
- #: gnu/packages/web.scm:8493
- msgid ""
- "Quark is an extremely small and simple HTTP GET/HEAD only\n"
- "web server for static content. TLS is not natively supported and should be\n"
- "provided by a TLS reverse proxy (e.g. tlstunnel, hitch or stunnel)."
- msgstr ""
- #: gnu/packages/web.scm:8524
- msgid "Simple webring implementation"
- msgstr ""
- #: gnu/packages/web.scm:8526
- msgid ""
- "@code{go--webring} provides a simple webring implementation as used by\n"
- "the Fediring."
- msgstr ""
- #: gnu/packages/web.scm:8559
- msgid "Self-hosted Web archiving"
- msgstr ""
- #: gnu/packages/web.scm:8560
- msgid ""
- "ArchiveBox is a powerful, self-hosted Web archiving\n"
- "solution to collect, save, and view sites you want to preserve offline.\n"
- "You can feed it URLs one at a time, or schedule regular imports. It saves\n"
- "snapshots of the URLs you feed it in several formats."
- msgstr ""
- #: gnu/packages/wordnet.scm:91
- msgid "Lexical database for the English language"
- msgstr ""
- #: gnu/packages/wordnet.scm:93
- msgid ""
- "WordNet is a large lexical database of English. Nouns, verbs,\n"
- "adjectives and adverbs are grouped into sets of cognitive synonyms (synsets),\n"
- "each expressing a distinct concept. Synsets are interlinked by means of\n"
- "conceptual-semantic and lexical relations. The resulting network of\n"
- "meaningfully related words and concepts can be navigated with the browser.\n"
- "WordNet is also freely and publicly available for download. WordNet's\n"
- "structure makes it a useful tool for computational linguistics and natural\n"
- "language processing."
- msgstr ""
- #: gnu/packages/xiph.scm:66
- msgid "Library for manipulating the ogg multimedia format"
- msgstr ""
- #: gnu/packages/xiph.scm:68
- msgid ""
- "The libogg library manipulates the ogg multimedia container\n"
- "format, which encapsulates raw compressed data and allows the interleaving of\n"
- "audio and video data. In addition to encapsulation and interleaving of\n"
- "multiple data streams, ogg provides packet framing, error detection, and\n"
- "periodic timestamps for seeking."
- msgstr ""
- #: gnu/packages/xiph.scm:93
- msgid "Library implementing the vorbis audio format"
- msgstr ""
- #: gnu/packages/xiph.scm:95
- msgid ""
- "The libvorbis library implements the ogg vorbis audio format,\n"
- "a fully open, non-proprietary, patent-and-royalty-free, general-purpose\n"
- "compressed audio format for mid to high quality (8kHz-48.0kHz, 16+ bit,\n"
- "polyphonic) audio and music at fixed and variable bitrates from 16 to\n"
- "128 kbps/channel."
- msgstr ""
- #: gnu/packages/xiph.scm:122
- msgid "Library implementing the Theora video format"
- msgstr ""
- #: gnu/packages/xiph.scm:124
- msgid ""
- "The libtheora library implements the ogg theora video format,\n"
- "a fully open, non-proprietary, patent-and-royalty-free, general-purpose\n"
- "compressed video format."
- msgstr ""
- #: gnu/packages/xiph.scm:150
- msgid "Library for patent-free audio compression format"
- msgstr ""
- #: gnu/packages/xiph.scm:152
- msgid ""
- "GNU Speex is a patent-free audio compression codec specially designed\n"
- "for speech. It is well-adapted to internet applications, such as VoIP. It\n"
- "features compression of different bands in the same bitstream, intensity\n"
- "stereo encoding, and voice activity detection."
- msgstr ""
- #: gnu/packages/xiph.scm:179
- msgid "Speex processing library"
- msgstr ""
- #: gnu/packages/xiph.scm:181
- msgid ""
- "SpeexDSP is a @dfn{DSP} (Digital Signal Processing) library based on\n"
- "work from the @code{speex} codec."
- msgstr ""
- #: gnu/packages/xiph.scm:209
- msgid "Cross platform audio library"
- msgstr ""
- #: gnu/packages/xiph.scm:211
- msgid ""
- "Libao is a cross-platform audio library that allows programs to\n"
- "output audio using a simple API on a wide variety of platforms.\n"
- "It currently supports:\n"
- "@enumerate\n"
- "@item Null output (handy for testing without a sound device),\n"
- "@item WAV files,\n"
- "@item AU files,\n"
- "@item RAW files,\n"
- "@item OSS (Open Sound System, used on Linux and FreeBSD),\n"
- "@item ALSA (Advanced Linux Sound Architecture),\n"
- "@item aRts (Analog RealTime Synth, used by KDE),\n"
- "@item PulseAudio (next generation GNOME sound server),\n"
- "@item esd (EsounD or Enlightened Sound Daemon),\n"
- "@item Mac OS X,\n"
- "@item Windows (98 and later),\n"
- "@item AIX,\n"
- "@item Sun/NetBSD/OpenBSD,\n"
- "@item IRIX,\n"
- "@item NAS (Network Audio Server),\n"
- "@item RoarAudio (Modern, multi-OS, networked Sound System),\n"
- "@item OpenBSD's sndio.\n"
- "@end enumerate\n"
- msgstr ""
- #: gnu/packages/xiph.scm:254
- msgid "Free lossless audio codec"
- msgstr ""
- #: gnu/packages/xiph.scm:256
- msgid ""
- "FLAC stands for Free Lossless Audio Codec, an audio format that is lossless,\n"
- "meaning that audio is compressed in FLAC without any loss in quality."
- msgstr ""
- #: gnu/packages/xiph.scm:277
- msgid "Karaoke and text codec for embedding in ogg"
- msgstr ""
- #: gnu/packages/xiph.scm:279
- msgid ""
- "Kate is an overlay codec, originally designed for karaoke and text,\n"
- "that can be multiplixed in Ogg. Text and images can be carried by a Kate\n"
- "stream, and animated. Most of the time, this would be multiplexed with\n"
- "audio/video to carry subtitles, song lyrics (with or without karaoke data),\n"
- "etc., but doesn't have to be.\n"
- "\n"
- "Series of curves (splines, segments, etc.) may be attached to various\n"
- "properties (text position, font size, etc.) to create animated overlays.\n"
- "This allows scrolling or fading text to be defined. This can even be used\n"
- "to draw arbitrary shapes, so hand drawing can also be represented by a\n"
- "Kate stream."
- msgstr ""
- #: gnu/packages/xiph.scm:313
- msgid "Ogg vorbis tools"
- msgstr ""
- #: gnu/packages/xiph.scm:315
- msgid ""
- "Ogg vorbis is a non-proprietary, patent-and-royalty-free,\n"
- "general-purpose compressed audio format.\n"
- "\n"
- "The package vorbis-tools contains\n"
- "ogg123, an ogg vorbis command line audio player;\n"
- "oggenc, the ogg vorbis encoder;\n"
- "oggdec, a simple, portable command line decoder (to wav and raw);\n"
- "ogginfo, to obtain information (tags, bitrate, length, etc.) about\n"
- " an ogg vorbis file."
- msgstr ""
- #: gnu/packages/xiph.scm:341 gnu/packages/xiph.scm:414
- msgid "Versatile audio codec"
- msgstr ""
- #: gnu/packages/xiph.scm:343
- msgid ""
- "Opus is a totally open, royalty-free, highly versatile audio codec. Opus\n"
- "is unmatched for interactive speech and music transmission over the Internet,\n"
- "but is also intended for storage and streaming applications. It is\n"
- "standardized by the Internet Engineering Task Force (IETF) as RFC 6716 which\n"
- "incorporated technology from Skype's SILK codec and Xiph.Org's CELT codec."
- msgstr ""
- #: gnu/packages/xiph.scm:378
- msgid "Command line utilities to encode, inspect, and decode .opus files"
- msgstr ""
- #: gnu/packages/xiph.scm:379
- msgid ""
- "Opus is a royalty-free, highly versatile audio codec.\n"
- "Opus-tools provide command line utilities for creating, inspecting and\n"
- "decoding .opus files."
- msgstr ""
- #: gnu/packages/xiph.scm:416
- msgid ""
- "The opusfile library provides seeking, decode, and playback of Opus\n"
- "streams in the Ogg container (.opus files) including over http(s) on posix and\n"
- "windows systems."
- msgstr ""
- #: gnu/packages/xiph.scm:438
- msgid "Library for encoding Opus audio files and streams"
- msgstr ""
- #: gnu/packages/xiph.scm:439
- msgid ""
- "The libopusenc libraries provide a high-level API for\n"
- "encoding Opus files and streams."
- msgstr ""
- #: gnu/packages/xiph.scm:468
- msgid "Streaming media server"
- msgstr ""
- #: gnu/packages/xiph.scm:469
- msgid ""
- "Icecast is a streaming media server which currently supports\n"
- "Ogg (Vorbis and Theora), Opus, WebM and MP3 audio streams. It can be used to\n"
- "create an Internet radio station or a privately running jukebox and many\n"
- "things in between."
- msgstr ""
- #: gnu/packages/xiph.scm:495
- msgid "Audio streaming library for icecast encoders"
- msgstr ""
- #: gnu/packages/xiph.scm:497
- msgid ""
- "Libshout is a library for communicating with and sending data to an\n"
- "icecast server. It handles the socket connection, the timing of the data,\n"
- "and prevents bad data from getting to the icecast server."
- msgstr ""
- #: gnu/packages/xiph.scm:522
- msgid "Real-time noise suppression"
- msgstr ""
- #: gnu/packages/xiph.scm:523
- msgid ""
- "RNNoise is a noise suppression library based on a recurrent\n"
- "neural network. The algorithm is described in Jean-Marc Valin's paper\n"
- "@cite{A Hybrid DSP/Deep Learning Approach to Real-Time Full-Band Speech\n"
- "Enhancement}."
- msgstr ""
- #~ msgid ""
- #~ "This package provides a dictionary for the Hunspell spell-checking\n"
- #~ "library."
- #~ msgstr ""
- #~ "이 꾸러미는 Hunspell 맞춤법 검사를 위해 라이브러리를\n"
- #~ "제공합니다."
|
