calamares/lang/calamares_nl.ts

<?xml version="1.0" ?><!DOCTYPE TS><TS language="nl" version="2.1">
<context>
    <name>BootInfoWidget</name>
    <message>
        <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="69"/>
        <source>The &lt;strong&gt;boot environment&lt;/strong&gt; of this system.&lt;br&gt;&lt;br&gt;Older x86 systems only support &lt;strong&gt;BIOS&lt;/strong&gt;.&lt;br&gt;Modern systems usually use &lt;strong&gt;EFI&lt;/strong&gt;, but may also show up as BIOS if started in compatibility mode.</source>
        <translation>De &lt;strong&gt;opstartomgeving&lt;/strong&gt; van dit systeem.&lt;br&gt;&lt;br&gt;Oudere x86-systemen ondersteunen enkel &lt;strong&gt;BIOS&lt;/strong&gt;.&lt;br&gt;Moderne systemen gebruiken meestal &lt;strong&gt;EFI&lt;/strong&gt;, maar kunnen ook als BIOS verschijnen als in compatibiliteitsmodus opgestart werd.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="79"/>
        <source>This system was started with an &lt;strong&gt;EFI&lt;/strong&gt; boot environment.&lt;br&gt;&lt;br&gt;To configure startup from an EFI environment, this installer must deploy a boot loader application, like &lt;strong&gt;GRUB&lt;/strong&gt; or &lt;strong&gt;systemd-boot&lt;/strong&gt; on an &lt;strong&gt;EFI System Partition&lt;/strong&gt;. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own.</source>
        <translation>Dit systeem werd opgestart met een &lt;strong&gt;EFI&lt;/strong&gt;-opstartomgeving.&lt;br&gt;&lt;br&gt;Om het opstarten vanaf een EFI-omgeving te configureren moet dit installatieprogramma een bootloader instellen, zoals &lt;strong&gt;GRUB&lt;/strong&gt; of &lt;strong&gt;systemd-boot&lt;/strong&gt; op een &lt;strong&gt;EFI-systeempartitie&lt;/strong&gt;. Dit gebeurt automatisch, tenzij je voor manueel partitioneren kiest, waar je het moet aanvinken of het zelf aanmaken.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="91"/>
        <source>This system was started with a &lt;strong&gt;BIOS&lt;/strong&gt; boot environment.&lt;br&gt;&lt;br&gt;To configure startup from a BIOS environment, this installer must install a boot loader, like &lt;strong&gt;GRUB&lt;/strong&gt;, either at the beginning of a partition or on the &lt;strong&gt;Master Boot Record&lt;/strong&gt; near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own.</source>
        <translation>Dit systeem werd opgestart met een &lt;strong&gt;BIOS&lt;/strong&gt;-opstartomgeving.&lt;br&gt;&lt;br&gt;Om het opstarten vanaf een BIOS-omgeving te configureren moet dit installatieprogramma een bootloader installeren, zoals &lt;strong&gt;GRUB&lt;/strong&gt;, ofwel op het begin van een partitie ofwel op de  &lt;strong&gt;Master Boot Record&lt;/strong&gt; bij het begin van de partitietabel (bij voorkeur). Dit gebeurt automatisch, tenzij je voor manueel partitioneren kiest, waar je het zelf moet aanmaken.</translation>
    </message>
</context>
<context>
    <name>BootLoaderModel</name>
    <message>
        <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="59"/>
        <source>Master Boot Record of %1</source>
        <translation>Master Boot Record van %1</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="76"/>
        <source>Boot Partition</source>
        <translation>Bootpartitie</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="81"/>
        <source>System Partition</source>
        <translation>Systeempartitie</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="111"/>
        <source>Do not install a boot loader</source>
        <translation>Geen bootloader installeren</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="125"/>
        <source>%1 (%2)</source>
        <translation>%1 (%2)</translation>
    </message>
</context>
<context>
    <name>Calamares::DebugWindow</name>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="24"/>
        <source>GlobalStorage</source>
        <translation>Globale Opslag</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="34"/>
        <source>JobQueue</source>
        <translation>Wachtrij</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="44"/>
        <source>Modules</source>
        <translation>Modules</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="57"/>
        <source>Type:</source>
        <translation>Type:</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="64"/>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="78"/>
        <source>none</source>
        <translation>geen</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="71"/>
        <source>Interface:</source>
        <translation>Interface:</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="93"/>
        <source>Tools</source>
        <translation>Hulpmiddelen</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.cpp" line="182"/>
        <source>Debug information</source>
        <translation>Debug informatie</translation>
    </message>
</context>
<context>
    <name>Calamares::ExecutionViewStep</name>
    <message>
        <location filename="../src/libcalamaresui/ExecutionViewStep.cpp" line="78"/>
        <source>Install</source>
        <translation>Installeer</translation>
    </message>
</context>
<context>
    <name>Calamares::JobThread</name>
    <message>
        <location filename="../src/libcalamares/JobQueue.cpp" line="86"/>
        <source>Done</source>
        <translation>Gereed</translation>
    </message>
</context>
<context>
    <name>Calamares::ProcessJob</name>
    <message>
        <location filename="../src/libcalamares/ProcessJob.cpp" line="51"/>
        <source>Run command %1 %2</source>
        <translation>Voer opdracht %1 %2 uit</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/ProcessJob.cpp" line="60"/>
        <source>Running command %1 %2</source>
        <translation>Uitvoeren van opdracht %1 %2</translation>
    </message>
</context>
<context>
    <name>Calamares::PythonJob</name>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="272"/>
        <source>Running %1 operation.</source>
        <translation>Bewerking %1 uitvoeren.</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="287"/>
        <source>Bad working directory path</source>
        <translation>Ongeldig pad voor huidige map </translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="288"/>
        <source>Working directory %1 for python job %2 is not readable.</source>
        <translation>Werkmap %1 voor python taak %2 onleesbaar.</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="298"/>
        <source>Bad main script file</source>
        <translation>Onjuist hoofdscriptbestand</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="299"/>
        <source>Main script file %1 for python job %2 is not readable.</source>
        <translation>Hoofdscriptbestand %1 voor python taak %2 onleesbaar.</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="375"/>
        <source>Boost.Python error in job &quot;%1&quot;.</source>
        <translation>Boost.Python fout in taak &quot;%1&quot;.</translation>
    </message>
</context>
<context>
    <name>Calamares::ViewManager</name>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="73"/>
        <source>&amp;Back</source>
        <translation>&amp;Terug</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="74"/>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="257"/>
        <source>&amp;Next</source>
        <translation>&amp;Volgende</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="75"/>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="266"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Afbreken</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="76"/>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="267"/>
        <source>Cancel installation without changing the system.</source>
        <translation>Installatie afbreken zonder aanpassingen aan het systeem.</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="255"/>
        <source>&amp;Install</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="303"/>
        <source>Cancel installation?</source>
        <translation>Installatie afbreken?</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="304"/>
        <source>Do you really want to cancel the current install process?
The installer will quit and all changes will be lost.</source>
        <translation>Wil je het huidige installatieproces echt afbreken?
Het installatieprogramma zal afsluiten en alle wijzigingen zullen verloren gaan.</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="309"/>
        <source>&amp;Yes</source>
        <translation>&amp;ja</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="310"/>
        <source>&amp;No</source>
        <translation>&amp;Nee</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="162"/>
        <source>&amp;Close</source>
        <translation>&amp;Sluiten</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="215"/>
        <source>Continue with setup?</source>
        <translation>Doorgaan met installatie?</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="216"/>
        <source>The %1 installer is about to make changes to your disk in order to install %2.&lt;br/&gt;&lt;strong&gt;You will not be able to undo these changes.&lt;/strong&gt;</source>
        <translation>Het %1 installatieprogramma zal nu aanpassingen maken aan je schijf om %2 te installeren.&lt;br/&gt;&lt;strong&gt;Deze veranderingen kunnen niet ongedaan gemaakt worden.&lt;/strong&gt;</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="221"/>
        <source>&amp;Install now</source>
        <translation>Nu &amp;installeren</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="222"/>
        <source>Go &amp;back</source>
        <translation>Ga &amp;terug</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="261"/>
        <source>&amp;Done</source>
        <translation>Voltooi&amp;d</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="262"/>
        <source>The installation is complete. Close the installer.</source>
        <translation>De installatie is voltooid. Sluit het installatie-programma.</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="159"/>
        <source>Error</source>
        <translation>Fout</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="160"/>
        <source>Installation Failed</source>
        <translation>Installatie Mislukt</translation>
    </message>
</context>
<context>
    <name>CalamaresPython::Helper</name>
    <message>
        <location filename="../src/libcalamares/PythonHelper.cpp" line="270"/>
        <source>Unknown exception type</source>
        <translation>Onbekend uitzonderingstype</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonHelper.cpp" line="284"/>
        <source>unparseable Python error</source>
        <translation>onuitvoerbare Python fout</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonHelper.cpp" line="324"/>
        <source>unparseable Python traceback</source>
        <translation>onuitvoerbare Python traceback</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonHelper.cpp" line="329"/>
        <source>Unfetchable Python error.</source>
        <translation>Onbekende Python fout.</translation>
    </message>
</context>
<context>
    <name>CalamaresWindow</name>
    <message>
        <location filename="../src/calamares/CalamaresWindow.cpp" line="44"/>
        <source>%1 Installer</source>
        <translation>%1 Installatieprogramma</translation>
    </message>
    <message>
        <location filename="../src/calamares/CalamaresWindow.cpp" line="111"/>
        <source>Show debug information</source>
        <translation>Toon debug informatie</translation>
    </message>
</context>
<context>
    <name>CheckerWidget</name>
    <message>
        <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="96"/>
        <source>This computer does not satisfy the minimum requirements for installing %1.&lt;br/&gt;Installation cannot continue. &lt;a href=&quot;#details&quot;&gt;Details...&lt;/a&gt;</source>
        <translation>Deze computer voldoet niet aan de minimumvereisten om %1 te installeren.&lt;br/&gt;De installatie kan niet doorgaan. &lt;a href=&quot;#details&quot;&gt;Details...&lt;/a&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="113"/>
        <source>This computer does not satisfy some of the recommended requirements for installing %1.&lt;br/&gt;Installation can continue, but some features might be disabled.</source>
        <translation>Deze computer voldoet niet aan enkele van de aanbevolen specificaties om %1 te installeren.&lt;br/&gt;De installatie kan doorgaan, maar sommige functies kunnen uitgeschakeld zijn.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="151"/>
        <source>This program will ask you some questions and set up %2 on your computer.</source>
        <translation>Dit programma stelt je enkele vragen en installeert %2 op jouw computer.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="174"/>
        <source>For best results, please ensure that this computer:</source>
        <translation>Voor de beste resultaten is het aangeraden dat deze computer:</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="202"/>
        <source>System requirements</source>
        <translation>Systeemvereisten</translation>
    </message>
</context>
<context>
    <name>ChoicePage</name>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="128"/>
        <source>After:</source>
        <translation>Na:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="235"/>
        <source>&lt;strong&gt;Manual partitioning&lt;/strong&gt;&lt;br/&gt;You can create or resize partitions yourself.</source>
        <translation>&lt;strong&gt;Handmatig partitioneren&lt;/strong&gt;&lt;br/&gt;Je maakt of wijzigt zelf de partities.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="998"/>
        <source>Boot loader location:</source>
        <translation>Bootloader locatie:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="942"/>
        <source>%1 will be shrunk to %2MB and a new %3MB partition will be created for %4.</source>
        <translation>%1 zal verkleind worden tot %2MB en een nieuwe %3MB partitie zal worden aangemaakt voor %4.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="126"/>
        <source>Select storage de&amp;vice:</source>
        <translation>Selecteer &amp;opslagmedium:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="127"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="924"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="970"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1049"/>
        <source>Current:</source>
        <translation>Huidig:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="795"/>
        <source>Reuse %1 as home partition for %2.</source>
        <translation>Hergebruik %1 als home-partitie voor %2</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="925"/>
        <source>&lt;strong&gt;Select a partition to shrink, then drag the bottom bar to resize&lt;/strong&gt;</source>
        <translation>&lt;strong&gt;Selecteer een partitie om te verkleinen, en sleep vervolgens de onderste balk om het formaat te wijzigen&lt;/strong&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1040"/>
        <source>&lt;strong&gt;Select a partition to install on&lt;/strong&gt;</source>
        <translation>&lt;strong&gt;Selecteer een partitie om op te installeren&lt;/strong&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1096"/>
        <source>An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source>
        <translation>Er werd geen EFI systeempartitie gevonden op dit systeem. Gelieve terug te gaan en manueel te partitioneren om %1 in te stellen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1105"/>
        <source>The EFI system partition at %1 will be used for starting %2.</source>
        <translation>De EFI systeempartitie op %1 zal gebruikt worden om %2 te starten.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1113"/>
        <source>EFI system partition:</source>
        <translation>EFI systeempartitie:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1200"/>
        <source>This storage device does not seem to have an operating system on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
        <translation>Dit opslagmedium lijkt geen besturingssysteem te bevatten. Wat wil je doen?&lt;br/&gt;Je zal jouw keuzes kunnen nazien en bevestigen voordat er iets aan het opslagmedium wordt veranderd.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1205"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1242"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1264"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1288"/>
        <source>&lt;strong&gt;Erase disk&lt;/strong&gt;&lt;br/&gt;This will &lt;font color=&quot;red&quot;&gt;delete&lt;/font&gt; all data currently present on the selected storage device.</source>
        <translation>&lt;strong&gt;Wis schijf&lt;/strong&gt;&lt;br/&gt;Dit zal alle huidige gegevens op de geselecteerd opslagmedium &lt;font color=&quot;red&quot;&gt;verwijderen&lt;/font&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1232"/>
        <source>This storage device has %1 on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
        <translation>Dit opslagmedium bevat %1. Wat wil je doen?&lt;br/&gt;Je zal jouw keuzes kunnen nazien en bevestigen voordat er iets aan het opslagmedium wordt veranderd.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1209"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1238"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1260"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1284"/>
        <source>&lt;strong&gt;Install alongside&lt;/strong&gt;&lt;br/&gt;The installer will shrink a partition to make room for %1.</source>
        <translation>&lt;strong&gt;Installeer ernaast&lt;/strong&gt;&lt;br/&gt;Het installatieprogramma zal een partitie verkleinen om plaats te maken voor %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1213"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1247"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1268"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1292"/>
        <source>&lt;strong&gt;Replace a partition&lt;/strong&gt;&lt;br/&gt;Replaces a partition with %1.</source>
        <translation>&lt;strong&gt;Vervang een partitie&lt;/strong&gt;&lt;br/&gt;Vervangt een partitie met %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1255"/>
        <source>This storage device already has an operating system on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
        <translation>Dit opslagmedium bevat reeds een besturingssysteem. Wat wil je doen?&lt;br/&gt;Je zal jouw keuzes kunnen nazien en bevestigen voordat er iets aan het opslagmedium wordt veranderd.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1279"/>
        <source>This storage device has multiple operating systems on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
        <translation>Dit opslagmedium bevat meerdere besturingssystemen. Wat wil je doen?&lt;br/&gt;Je zal jouw keuzes kunnen nazien en bevestigen voordat er iets aan het opslagmedium wordt veranderd.</translation>
    </message>
</context>
<context>
    <name>ClearMountsJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="45"/>
        <source>Clear mounts for partitioning operations on %1</source>
        <translation>Geef aankoppelpunten vrij voor partitiebewerkingen op %1</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="53"/>
        <source>Clearing mounts for partitioning operations on %1.</source>
        <translation>Aankoppelpunten vrijgeven voor partitiebewerkingen op %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="190"/>
        <source>Cleared all mounts for %1</source>
        <translation>Alle aankoppelpunten voor %1 zijn vrijgegeven</translation>
    </message>
</context>
<context>
    <name>ClearTempMountsJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="42"/>
        <source>Clear all temporary mounts.</source>
        <translation>Geef alle tijdelijke aankoppelpunten vrij.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="49"/>
        <source>Clearing all temporary mounts.</source>
        <translation>Alle tijdelijke aankoppelpunten vrijgeven.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="60"/>
        <source>Cannot get list of temporary mounts.</source>
        <translation>Kan geen lijst van tijdelijke aankoppelpunten verkrijgen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="99"/>
        <source>Cleared all temporary mounts.</source>
        <translation>Alle tijdelijke aankoppelpunten zijn vrijgegeven.</translation>
    </message>
</context>
<context>
    <name>CommandList</name>
    <message>
        <location filename="../src/libcalamares/utils/CommandList.cpp" line="124"/>
        <source>Could not run command.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CommandList.cpp" line="125"/>
        <source>The command runs in the host environment and needs to know the root path, but no rootMountPoint is defined.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>ContextualProcessJob</name>
    <message>
        <location filename="../src/modules/contextualprocess/ContextualProcessJob.cpp" line="117"/>
        <source>Contextual Processes Job</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>CreatePartitionDialog</name>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="14"/>
        <source>Create a Partition</source>
        <translation>Maak partitie</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="48"/>
        <source> MiB</source>
        <translation>MiB</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="55"/>
        <source>Partition &amp;Type:</source>
        <translation>Partitie&amp;type:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="67"/>
        <source>&amp;Primary</source>
        <translation>&amp;Primair</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="77"/>
        <source>E&amp;xtended</source>
        <translation>&amp;Uitgebreid</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="119"/>
        <source>Fi&amp;le System:</source>
        <translation>&amp;Bestandssysteem</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="151"/>
        <source>LVM LV name</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="188"/>
        <source>Flags:</source>
        <translation>Vlaggen:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="161"/>
        <source>&amp;Mount Point:</source>
        <translation>Aan&amp;koppelpunt</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="38"/>
        <source>Si&amp;ze:</source>
        <translation>&amp;Grootte:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="69"/>
        <source>En&amp;crypt</source>
        <translation>&amp;Versleutelen</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="148"/>
        <source>Logical</source>
        <translation>Logisch</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="153"/>
        <source>Primary</source>
        <translation>Primair</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="170"/>
        <source>GPT</source>
        <translation>GPT</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="259"/>
        <source>Mountpoint already in use. Please select another one.</source>
        <translation>Aankoppelpunt reeds in gebruik. Gelieve een andere te kiezen.</translation>
    </message>
</context>
<context>
    <name>CreatePartitionJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="44"/>
        <source>Create new %2MB partition on %4 (%3) with file system %1.</source>
        <translation>Maak nieuwe %2MB partitie aan op %4 (%3) met bestandsysteem %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="55"/>
        <source>Create new &lt;strong&gt;%2MB&lt;/strong&gt; partition on &lt;strong&gt;%4&lt;/strong&gt; (%3) with file system &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Maak een nieuwe &lt;strong&gt;%2MB&lt;/strong&gt; partitie aan op &lt;strong&gt;%4&lt;/strong&gt; (%3) met bestandsysteem &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="67"/>
        <source>Creating new %1 partition on %2.</source>
        <translation>Nieuwe %1 partitie aanmaken op %2.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="79"/>
        <source>The installer failed to create partition on disk &apos;%1&apos;.</source>
        <translation>Het installatieprogramma kon geen partitie aanmaken op schijf &apos;%1&apos;.</translation>
    </message>
</context>
<context>
    <name>CreatePartitionTableDialog</name>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="20"/>
        <source>Create Partition Table</source>
        <translation>Maak Partitietabel</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="39"/>
        <source>Creating a new partition table will delete all existing data on the disk.</source>
        <translation>Een nieuwe partitietabel aanmaken zal alle bestaande gegevens op de schijf wissen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="65"/>
        <source>What kind of partition table do you want to create?</source>
        <translation>Welk type partitietabel wens je aan te maken?</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="72"/>
        <source>Master Boot Record (MBR)</source>
        <translation>Master Boot Record (MBR)</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="82"/>
        <source>GUID Partition Table (GPT)</source>
        <translation>GUID Partitietabel (GPT)</translation>
    </message>
</context>
<context>
    <name>CreatePartitionTableJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="45"/>
        <source>Create new %1 partition table on %2.</source>
        <translation>Maak een nieuwe %1 partitietabel aan op %2.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="52"/>
        <source>Create new &lt;strong&gt;%1&lt;/strong&gt; partition table on &lt;strong&gt;%2&lt;/strong&gt; (%3).</source>
        <translation>Maak een nieuwe &lt;strong&gt;%1&lt;/strong&gt; partitietabel aan op &lt;strong&gt;%2&lt;/strong&gt; (%3).</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="62"/>
        <source>Creating new %1 partition table on %2.</source>
        <translation>Nieuwe %1 partitietabel aanmaken op %2.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="72"/>
        <source>The installer failed to create a partition table on %1.</source>
        <translation>Het installatieprogramma kon geen partitietabel aanmaken op %1.</translation>
    </message>
</context>
<context>
    <name>CreateUserJob</name>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="50"/>
        <source>Create user %1</source>
        <translation>Maak gebruiker %1</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="57"/>
        <source>Create user &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Maak gebruiker &lt;strong&gt;%1&lt;/strong&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="64"/>
        <source>Creating user %1.</source>
        <translation>Gebruiker %1 aanmaken.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="80"/>
        <source>Sudoers dir is not writable.</source>
        <translation>Sudoers map is niet schrijfbaar.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="84"/>
        <source>Cannot create sudoers file for writing.</source>
        <translation>Kan het bestand sudoers niet aanmaken.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="92"/>
        <source>Cannot chmod sudoers file.</source>
        <translation>chmod sudoers gefaald.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="98"/>
        <source>Cannot open groups file for reading.</source>
        <translation>Kan het bestand groups niet lezen.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="159"/>
        <source>Cannot create user %1.</source>
        <translation>Kan gebruiker %1 niet aanmaken.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="161"/>
        <source>useradd terminated with error code %1.</source>
        <translation>useradd is gestopt met foutcode %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="170"/>
        <source>Cannot add user %1 to groups: %2.</source>
        <translation>Kan gebruiker %1 niet toevoegen aan groepen: %2.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="173"/>
        <source>usermod terminated with error code %1.</source>
        <translation>usermod is gestopt met foutcode %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="183"/>
        <source>Cannot set home directory ownership for user %1.</source>
        <translation>Kan eigendomsrecht gebruikersmap niet instellen voor gebruiker %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="185"/>
        <source>chown terminated with error code %1.</source>
        <translation>chown is gestopt met foutcode %1.</translation>
    </message>
</context>
<context>
    <name>DeletePartitionJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="40"/>
        <source>Delete partition %1.</source>
        <translation>Verwijder partitie %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="48"/>
        <source>Delete partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Verwijder partitie &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="56"/>
        <source>Deleting partition %1.</source>
        <translation>Partitie %1 verwijderen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="68"/>
        <source>The installer failed to delete partition %1.</source>
        <translation>Het installatieprogramma kon partitie %1 niet verwijderen.</translation>
    </message>
</context>
<context>
    <name>DeviceInfoWidget</name>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="150"/>
        <source>The type of &lt;strong&gt;partition table&lt;/strong&gt; on the selected storage device.&lt;br&gt;&lt;br&gt;The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device.&lt;br&gt;This installer will keep the current partition table unless you explicitly choose otherwise.&lt;br&gt;If unsure, on modern systems GPT is preferred.</source>
        <translation>Het type van &lt;strong&gt;partitietabel&lt;/strong&gt; op het geselecteerde opslagmedium.&lt;br&gt;&lt;br&gt;Om het type partitietabel te wijzigen, dien je deze te verwijderen en opnieuw aan te maken, wat alle gegevens op het opslagmedium vernietigt.&lt;br&gt;Het installatieprogramma zal de huidige partitietabel behouden tenzij je expliciet anders verkiest.&lt;br&gt;Bij twijfel wordt aangeraden GPT te gebruiken op moderne systemen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="107"/>
        <source>This device has a &lt;strong&gt;%1&lt;/strong&gt; partition table.</source>
        <translation>Dit apparaat heeft een &lt;strong&gt;%1&lt;/strong&gt; partitietabel.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="114"/>
        <source>This is a &lt;strong&gt;loop&lt;/strong&gt; device.&lt;br&gt;&lt;br&gt;It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem.</source>
        <translation>Dit is een &lt;strong&gt;loop&lt;/strong&gt; apparaat.&lt;br&gt;&lt;br&gt;Dit is een pseudo-apparaat zonder partitietabel en maakt een bestand beschikbaar als blokapparaat. Dergelijke configuratie bevat gewoonlijk slechts een enkel bestandssysteem.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="121"/>
        <source>This installer &lt;strong&gt;cannot detect a partition table&lt;/strong&gt; on the selected storage device.&lt;br&gt;&lt;br&gt;The device either has no partition table, or the partition table is corrupted or of an unknown type.&lt;br&gt;This installer can create a new partition table for you, either automatically, or through the manual partitioning page.</source>
        <translation>Het installatieprogramma &lt;strong&gt;kon geen partitietabel vinden&lt;/strong&gt; op het geselecteerde opslagmedium.&lt;br&gt;&lt;br&gt;Dit apparaat heeft ofwel geen partitietabel, ofwel is deze ongeldig of van een onbekend type.&lt;br&gt;Het installatieprogramma kan een nieuwe partitietabel aanmaken, ofwel automatisch, ofwel via de manuele partitioneringspagina.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="131"/>
        <source>&lt;br&gt;&lt;br&gt;This is the recommended partition table type for modern systems which start from an &lt;strong&gt;EFI&lt;/strong&gt; boot environment.</source>
        <translation>&lt;br&gt;&lt;br&gt;Dit is de aanbevolen partitietabel voor moderne systemen die starten vanaf een &lt;strong&gt;EFI&lt;/strong&gt; opstartomgeving.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="137"/>
        <source>&lt;br&gt;&lt;br&gt;This partition table type is only advisable on older systems which start from a &lt;strong&gt;BIOS&lt;/strong&gt; boot environment. GPT is recommended in most other cases.&lt;br&gt;&lt;br&gt;&lt;strong&gt;Warning:&lt;/strong&gt; the MBR partition table is an obsolete MS-DOS era standard.&lt;br&gt;Only 4 &lt;em&gt;primary&lt;/em&gt; partitions may be created, and of those 4, one can be an &lt;em&gt;extended&lt;/em&gt; partition, which may in turn contain many &lt;em&gt;logical&lt;/em&gt; partitions.</source>
        <translation>&lt;br&gt;&lt;br&gt;Dit type partitietabel is enkel aan te raden op oudere systemen die opstarten vanaf een &lt;strong&gt;BIOS&lt;/strong&gt;-opstartomgeving. GPT is aan te raden in de meeste andere gevallen.&lt;br&gt;&lt;br&gt;&lt;strong&gt;Opgelet:&lt;/strong&gt; De MBR-partitietabel is een verouderde standaard uit de tijd van MS-DOS.&lt;br&gt;Slechts 4 &lt;em&gt;primaire&lt;/em&gt; partities kunnen aangemaakt worden, en van deze 4 kan één een &lt;em&gt;uitgebreide&lt;/em&gt; partitie zijn, die op zijn beurt meerdere &lt;em&gt;logische&lt;/em&gt; partities kan bevatten.</translation>
    </message>
</context>
<context>
    <name>DeviceModel</name>
    <message>
        <location filename="../src/modules/partition/core/DeviceModel.cpp" line="80"/>
        <source>%1 - %2 (%3)</source>
        <translation>%1 - %2 (%3)</translation>
    </message>
</context>
<context>
    <name>DracutLuksCfgJob</name>
    <message>
        <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="131"/>
        <source>Write LUKS configuration for Dracut to %1</source>
        <translation>Schrijf LUKS configuratie voor Dracut op %1</translation>
    </message>
    <message>
        <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="133"/>
        <source>Skip writing LUKS configuration for Dracut: &quot;/&quot; partition is not encrypted</source>
        <translation>Schrijven van LUKS configuratie voor Dracut overgeslaan: &quot;/&quot; partitie is niet versleuteld</translation>
    </message>
    <message>
        <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="149"/>
        <source>Failed to open %1</source>
        <translation>Openen van %1 mislukt</translation>
    </message>
</context>
<context>
    <name>DummyCppJob</name>
    <message>
        <location filename="../src/modules/dummycpp/DummyCppJob.cpp" line="46"/>
        <source>Dummy C++ Job</source>
        <translation>C++ schijnopdracht</translation>
    </message>
</context>
<context>
    <name>EditExistingPartitionDialog</name>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="20"/>
        <source>Edit Existing Partition</source>
        <translation>Bestaande Partitie Aanpassen</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="50"/>
        <source>Content:</source>
        <translation>Inhoud:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="60"/>
        <source>&amp;Keep</source>
        <translation>&amp;Behouden</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="70"/>
        <source>Format</source>
        <translation>Formatteren</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="89"/>
        <source>Warning: Formatting the partition will erase all existing data.</source>
        <translation>Opgelet: Een partitie formatteren zal alle bestaande gegevens wissen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="99"/>
        <source>&amp;Mount Point:</source>
        <translation>Aan&amp;koppelpunt:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="119"/>
        <source>Si&amp;ze:</source>
        <translation>&amp;Grootte:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="129"/>
        <source> MiB</source>
        <translation>MiB</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="136"/>
        <source>Fi&amp;le System:</source>
        <translation>Bestands&amp;systeem</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="149"/>
        <source>Flags:</source>
        <translation>Vlaggen:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.cpp" line="268"/>
        <source>Mountpoint already in use. Please select another one.</source>
        <translation>Aankoppelpunt reeds in gebruik. Gelieve een andere te kiezen.</translation>
    </message>
</context>
<context>
    <name>EncryptWidget</name>
    <message>
        <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="32"/>
        <source>En&amp;crypt system</source>
        <translation>En&amp;crypteer systeem</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="42"/>
        <source>Passphrase</source>
        <translation>Wachtwoordzin</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="52"/>
        <source>Confirm passphrase</source>
        <translation>Bevestig wachtwoordzin</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EncryptWidget.cpp" line="151"/>
        <source>Please enter the same passphrase in both boxes.</source>
        <translation>Gelieve in beide velden dezelfde wachtwoordzin in te vullen.</translation>
    </message>
</context>
<context>
    <name>FillGlobalStorageJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="123"/>
        <source>Set partition information</source>
        <translation>Instellen partitie-informatie</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="147"/>
        <source>Install %1 on &lt;strong&gt;new&lt;/strong&gt; %2 system partition.</source>
        <translation>Installeer %1 op &lt;strong&gt;nieuwe&lt;/strong&gt; %2 systeempartitie.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="151"/>
        <source>Set up &lt;strong&gt;new&lt;/strong&gt; %2 partition with mount point &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Maak &lt;strong&gt;nieuwe&lt;/strong&gt; %2 partitie met aankoppelpunt &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="159"/>
        <source>Install %2 on %3 system partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Installeer %2 op %3 systeempartitie &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="164"/>
        <source>Set up %3 partition &lt;strong&gt;%1&lt;/strong&gt; with mount point &lt;strong&gt;%2&lt;/strong&gt;.</source>
        <translation>Stel %3 partitie &lt;strong&gt;%1&lt;/strong&gt; in met aankoppelpunt &lt;strong&gt;%2&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="176"/>
        <source>Install boot loader on &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Installeer bootloader op &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="186"/>
        <source>Setting up mount points.</source>
        <translation>Aankoppelpunten instellen.</translation>
    </message>
</context>
<context>
    <name>FinishedPage</name>
    <message>
        <location filename="../src/modules/finished/FinishedPage.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedPage.ui" line="95"/>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;When this box is checked, your system will restart immediately when you click on &lt;span style=&quot; font-style:italic;&quot;&gt;Done&lt;/span&gt; or close the installer.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedPage.ui" line="98"/>
        <source>&amp;Restart now</source>
        <translation>&amp;Nu herstarten</translation>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedPage.cpp" line="51"/>
        <source>&lt;h1&gt;All done.&lt;/h1&gt;&lt;br/&gt;%1 has been installed on your computer.&lt;br/&gt;You may now restart into your new system, or continue using the %2 Live environment.</source>
        <translation>&lt;h1&gt;Klaar.&lt;/h1&gt;&lt;br/&gt;%1 is op je computer geïnstalleerd.&lt;br/&gt;Je mag je nieuwe systeem nu herstarten of de %2 Live omgeving blijven gebruiken.</translation>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedPage.cpp" line="109"/>
        <source>&lt;h1&gt;Installation Failed&lt;/h1&gt;&lt;br/&gt;%1 has not been installed on your computer.&lt;br/&gt;The error message was: %2.</source>
        <translation>&lt;h1&gt;Installatie Mislukt&lt;/h1&gt;&lt;br/&gt;%1 werd niet op de computer geïnstalleerd. &lt;br/&gt;De foutboodschap was: %2</translation>
    </message>
</context>
<context>
    <name>FinishedViewStep</name>
    <message>
        <location filename="../src/modules/finished/FinishedViewStep.cpp" line="59"/>
        <source>Finish</source>
        <translation>Beëindigen</translation>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedViewStep.cpp" line="124"/>
        <source>Installation Complete</source>
        <translation>Installatie Afgerond.</translation>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedViewStep.cpp" line="125"/>
        <source>The installation of %1 is complete.</source>
        <translation>De installatie van %1 is afgerond.</translation>
    </message>
</context>
<context>
    <name>FormatPartitionJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="41"/>
        <source>Format partition %1 (file system: %2, size: %3 MB) on %4.</source>
        <translation>Formateer partitie %1 (bestandssysteem: %2, grootte: %3 MB) op %4.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="52"/>
        <source>Format &lt;strong&gt;%3MB&lt;/strong&gt; partition &lt;strong&gt;%1&lt;/strong&gt; with file system &lt;strong&gt;%2&lt;/strong&gt;.</source>
        <translation>Formatteer &lt;strong&gt;%3MB&lt;/strong&gt; partitie &lt;strong&gt;%1&lt;/strong&gt; met bestandsysteem &lt;strong&gt;%2&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="63"/>
        <source>Formatting partition %1 with file system %2.</source>
        <translation>Partitie %1 formatteren met bestandssysteem %2.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="77"/>
        <source>The installer failed to format partition %1 on disk &apos;%2&apos;.</source>
        <translation>Installatieprogramma heeft gefaald om partitie %1 op schijf %2 te formateren.</translation>
    </message>
</context>
<context>
    <name>InteractiveTerminalPage</name>
    <message>
        <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="53"/>
        <source>Konsole not installed</source>
        <translation>Konsole is niet geïnstalleerd</translation>
    </message>
    <message>
        <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="54"/>
        <source>Please install KDE Konsole and try again!</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="116"/>
        <source>Executing script: &amp;nbsp;&lt;code&gt;%1&lt;/code&gt;</source>
        <translation>Script uitvoeren: &amp;nbsp;&lt;code&gt;%1&lt;/code&gt;</translation>
    </message>
</context>
<context>
    <name>InteractiveTerminalViewStep</name>
    <message>
        <location filename="../src/modules/interactiveterminal/InteractiveTerminalViewStep.cpp" line="45"/>
        <source>Script</source>
        <translation>Script</translation>
    </message>
</context>
<context>
    <name>KeyboardPage</name>
    <message>
        <location filename="../src/modules/keyboard/KeyboardPage.cpp" line="220"/>
        <source>Set keyboard model to %1.&lt;br/&gt;</source>
        <translation>Instellen toetsenbord model naar %1.&lt;br/&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/KeyboardPage.cpp" line="222"/>
        <source>Set keyboard layout to %1/%2.</source>
        <translation>Instellen toetsenbord lay-out naar %1/%2.</translation>
    </message>
</context>
<context>
    <name>KeyboardViewStep</name>
    <message>
        <location filename="../src/modules/keyboard/KeyboardViewStep.cpp" line="50"/>
        <source>Keyboard</source>
        <translation>Toetsenbord</translation>
    </message>
</context>
<context>
    <name>LCLocaleDialog</name>
    <message>
        <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="34"/>
        <source>System locale setting</source>
        <translation>Landinstellingen</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="41"/>
        <source>The system locale setting affects the language and character set for some command line user interface elements.&lt;br/&gt;The current setting is &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>De landinstellingen bepalen de taal en het tekenset voor sommige opdrachtregelelementen.&lt;br/&gt;De huidige instelling is &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="66"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Afbreken</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="67"/>
        <source>&amp;OK</source>
        <translation>&amp;OK</translation>
    </message>
</context>
<context>
    <name>LicensePage</name>
    <message>
        <location filename="../src/modules/license/LicensePage.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="88"/>
        <source>I accept the terms and conditions above.</source>
        <translation>Ik aanvaard de bovenstaande algemene voorwaarden.</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="115"/>
        <source>&lt;h1&gt;License Agreement&lt;/h1&gt;This setup procedure will install proprietary software that is subject to licensing terms.</source>
        <translation>&lt;h1&gt;Licentieovereenkomst&lt;/h1&gt;Deze installatieprocedure zal propriëtaire software installeren die onderworpen is aan licentievoorwaarden.</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="118"/>
        <source>Please review the End User License Agreements (EULAs) above.&lt;br/&gt;If you do not agree with the terms, the setup procedure cannot continue.</source>
        <translation>Gelieve bovenstaande licentieovereenkomsten voor eindgebruikers (EULA&apos;s) na te kijken.&lt;br/&gt;Indien je de voorwaarden niet aanvaardt, kan de installatie niet doorgaan.</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="124"/>
        <source>&lt;h1&gt;License Agreement&lt;/h1&gt;This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience.</source>
        <translation>&lt;h1&gt;Licentieovereenkomst&lt;/h1&gt;Deze installatieprocedure kan mogelijk propriëtaire software, onderworpen aan licentievoorwaarden, installeren om bijkomende functies aan te bieden of de gebruikservaring te verbeteren.</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="129"/>
        <source>Please review the End User License Agreements (EULAs) above.&lt;br/&gt;If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead.</source>
        <translation>Gelieve bovenstaande licentieovereenkomsten voor eindgebruikers (EULA&apos;s) na te kijken.&lt;br/&gt;Indien je de voorwaarden niet aanvaardt zal de propriëtaire software vervangen worden door openbron alternatieven.</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="159"/>
        <source>&lt;strong&gt;%1 driver&lt;/strong&gt;&lt;br/&gt;by %2</source>
        <extracomment>%1 is an untranslatable product name, example: Creative Audigy driver</extracomment>
        <translation>&lt;strong&gt;%1 stuurprogramma&lt;/strong&gt;&lt;br/&gt;door %2</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="166"/>
        <source>&lt;strong&gt;%1 graphics driver&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
        <extracomment>%1 is usually a vendor name, example: Nvidia graphics driver</extracomment>
        <translation>&lt;strong&gt;%1 grafisch stuurprogramma&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;door %2&lt;/font&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="172"/>
        <source>&lt;strong&gt;%1 browser plugin&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
        <translation>&lt;strong&gt;%1 browser plugin&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;door %2&lt;/font&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="178"/>
        <source>&lt;strong&gt;%1 codec&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
        <translation>&lt;strong&gt;%1 codec&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;door %2&lt;/font&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="184"/>
        <source>&lt;strong&gt;%1 package&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
        <translation>&lt;strong&gt;%1 pakket&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;door %2&lt;/font&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="190"/>
        <source>&lt;strong&gt;%1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
        <translation>&lt;strong&gt;%1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;door %2&lt;/font&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="202"/>
        <source>&lt;a href=&quot;%1&quot;&gt;view license agreement&lt;/a&gt;</source>
        <translation>&lt;a href=&quot;%1&quot;&gt;toon de licentieovereenkomst&lt;/a&gt;</translation>
    </message>
</context>
<context>
    <name>LicenseViewStep</name>
    <message>
        <location filename="../src/modules/license/LicenseViewStep.cpp" line="51"/>
        <source>License</source>
        <translation>Licentie</translation>
    </message>
</context>
<context>
    <name>LocalePage</name>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="387"/>
        <source>The system language will be set to %1.</source>
        <translation>De taal van het systeem zal worden ingesteld op %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="389"/>
        <source>The numbers and dates locale will be set to %1.</source>
        <translation>De getal- en datumnotatie worden ingesteld op %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="215"/>
        <source>Region:</source>
        <translation>Regio:</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="216"/>
        <source>Zone:</source>
        <translation>Zone:</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="220"/>
        <location filename="../src/modules/locale/LocalePage.cpp" line="221"/>
        <source>&amp;Change...</source>
        <translation>&amp;Aanpassen</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="398"/>
        <source>Set timezone to %1/%2.&lt;br/&gt;</source>
        <translation>Instellen tijdzone naar %1/%2.&lt;br/&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="480"/>
        <source>%1 (%2)</source>
        <extracomment>Language (Country)</extracomment>
        <translation>%1 (%2)</translation>
    </message>
</context>
<context>
    <name>LocaleViewStep</name>
    <message>
        <location filename="../src/modules/locale/LocaleViewStep.cpp" line="60"/>
        <source>Loading location data...</source>
        <translation>Laden van locatiegegevens...</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocaleViewStep.cpp" line="175"/>
        <source>Location</source>
        <translation>Locatie</translation>
    </message>
</context>
<context>
    <name>NetInstallPage</name>
    <message>
        <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="72"/>
        <source>Name</source>
        <translation>Naam</translation>
    </message>
    <message>
        <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="73"/>
        <source>Description</source>
        <translation>Beschrijving</translation>
    </message>
    <message>
        <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="94"/>
        <source>Network Installation. (Disabled: Unable to fetch package lists, check your network connection)</source>
        <translation>Netwerkinstallatie. (Uitgeschakeld: kon de pakketlijsten niet binnenhalen, controleer de netwerkconnectie)</translation>
    </message>
    <message>
        <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="104"/>
        <source>Network Installation. (Disabled: Received invalid groups data)</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>NetInstallViewStep</name>
    <message>
        <location filename="../src/modules/netinstall/NetInstallViewStep.cpp" line="52"/>
        <source>Package selection</source>
        <translation>Pakketkeuze</translation>
    </message>
</context>
<context>
    <name>PWQ</name>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="63"/>
        <source>Password is too short</source>
        <translation>Het wachtwoord is te kort</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="85"/>
        <source>Password is too long</source>
        <translation>Het wachtwoord is te lang</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="151"/>
        <source>Password is too weak</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="158"/>
        <source>Memory allocation error when setting &apos;%1&apos;</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="162"/>
        <source>Memory allocation error</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="164"/>
        <source>The password is the same as the old one</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="166"/>
        <source>The password is a palindrome</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="168"/>
        <source>The password differs with case changes only</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="170"/>
        <source>The password is too similar to the old one</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="172"/>
        <source>The password contains the user name in some form</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="174"/>
        <source>The password contains words from the real name of the user in some form</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="176"/>
        <source>The password contains forbidden words in some form</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="179"/>
        <source>The password contains less than %1 digits</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="180"/>
        <source>The password contains too few digits</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="183"/>
        <source>The password contains less than %1 uppercase letters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="184"/>
        <source>The password contains too few uppercase letters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="187"/>
        <source>The password contains less than %1 lowercase letters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="188"/>
        <source>The password contains too few lowercase letters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="191"/>
        <source>The password contains less than %1 non-alphanumeric characters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="192"/>
        <source>The password contains too few non-alphanumeric characters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="195"/>
        <source>The password is shorter than %1 characters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="196"/>
        <source>The password is too short</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="198"/>
        <source>The password is just rotated old one</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="201"/>
        <source>The password contains less than %1 character classes</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="202"/>
        <source>The password does not contain enough character classes</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="205"/>
        <source>The password contains more than %1 same characters consecutively</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="206"/>
        <source>The password contains too many same characters consecutively</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="209"/>
        <source>The password contains more than %1 characters of the same class consecutively</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="210"/>
        <source>The password contains too many characters of the same class consecutively</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="213"/>
        <source>The password contains monotonic sequence longer than %1 characters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="214"/>
        <source>The password contains too long of a monotonic character sequence</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="216"/>
        <source>No password supplied</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="218"/>
        <source>Cannot obtain random numbers from the RNG device</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="220"/>
        <source>Password generation failed - required entropy too low for settings</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="225"/>
        <source>The password fails the dictionary check - %1</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="227"/>
        <source>The password fails the dictionary check</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="231"/>
        <source>Unknown setting - %1</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="235"/>
        <source>Unknown setting</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="239"/>
        <source>Bad integer value of setting - %1</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="243"/>
        <source>Bad integer value</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="247"/>
        <source>Setting %1 is not of integer type</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="251"/>
        <source>Setting is not of integer type</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="255"/>
        <source>Setting %1 is not of string type</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="259"/>
        <source>Setting is not of string type</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="261"/>
        <source>Opening the configuration file failed</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="263"/>
        <source>The configuration file is malformed</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="265"/>
        <source>Fatal failure</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="267"/>
        <source>Unknown error</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>Page_Keyboard</name>
    <message>
        <location filename="../src/modules/keyboard/KeyboardPage.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/KeyboardPage.ui" line="70"/>
        <source>Keyboard Model:</source>
        <translation>Toetsenbord model:</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/KeyboardPage.ui" line="131"/>
        <source>Type here to test your keyboard</source>
        <translation>Typ hier om uw toetsenbord te testen</translation>
    </message>
</context>
<context>
    <name>Page_UserSetup</name>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="36"/>
        <source>What is your name?</source>
        <translation>Wat is je naam?</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="117"/>
        <source>What name do you want to use to log in?</source>
        <translation>Welke naam wil je gebruiken om in te loggen?</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="306"/>
        <location filename="../src/modules/users/page_usersetup.ui" line="437"/>
        <location filename="../src/modules/users/page_usersetup.ui" line="582"/>
        <source>font-weight: normal</source>
        <translation>afronding lettertype: normaal</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="200"/>
        <source>&lt;small&gt;If more than one person will use this computer, you can set up multiple accounts after installation.&lt;/small&gt;</source>
        <translation>&lt;small&gt;Indien meer dan één persoon deze computer gebruikt, kunt u meerdere accounts instellen na de installatie.&lt;/ small&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="335"/>
        <source>Choose a password to keep your account safe.</source>
        <translation>Kies een wachtwoord om uw account veilig te houden.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="440"/>
        <source>&lt;small&gt;Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals.&lt;/small&gt;</source>
        <translation>&lt;small&gt;Voer hetzelfde wachtwoord twee keer in, zodat het gecontroleerd kan worden op typefouten. Een goed wachtwoord bevat een combinatie van letters, cijfers en leestekens, is ten minste acht tekens lang en moet regelmatig worden gewijzigd.&lt;/ small&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="226"/>
        <source>What is the name of this computer?</source>
        <translation>Wat is de naam van deze computer?</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="309"/>
        <source>&lt;small&gt;This name will be used if you make the computer visible to others on a network.&lt;/small&gt;</source>
        <translation>&lt;small&gt;Deze naam zal worden gebruikt als u de computer zichtbaar maakt voor anderen op een netwerk.&lt;/ small&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="450"/>
        <source>Log in automatically without asking for the password.</source>
        <translation>Automatisch aanmelden zonder wachtwoord te vragen.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="457"/>
        <source>Use the same password for the administrator account.</source>
        <translation>Gebruik hetzelfde wachtwoord voor het administratoraccount.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="480"/>
        <source>Choose a password for the administrator account.</source>
        <translation>Kies een wachtwoord voor het administrator account.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="585"/>
        <source>&lt;small&gt;Enter the same password twice, so that it can be checked for typing errors.&lt;/small&gt;</source>
        <translation>&lt;small&gt;Voer hetzelfde wachtwoord twee keer in, zodat het gecontroleerd kan worden op typefouten.&lt;/ small&gt;</translation>
    </message>
</context>
<context>
    <name>PartitionLabelsView</name>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="193"/>
        <source>Root</source>
        <translation>Root</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="196"/>
        <source>Home</source>
        <translation>Home</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="198"/>
        <source>Boot</source>
        <translation>Boot</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="201"/>
        <source>EFI system</source>
        <translation>EFI systeem</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="203"/>
        <source>Swap</source>
        <translation>Wisselgeheugen</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="205"/>
        <source>New partition for %1</source>
        <translation>Nieuwe partitie voor %1</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="207"/>
        <source>New partition</source>
        <translation>Nieuwe partitie</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="224"/>
        <source>%1  %2</source>
        <translation>%1 %2</translation>
    </message>
</context>
<context>
    <name>PartitionModel</name>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="137"/>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="169"/>
        <source>Free Space</source>
        <translation>Vrije ruimte</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="141"/>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="173"/>
        <source>New partition</source>
        <translation>Nieuwe partitie</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="257"/>
        <source>Name</source>
        <translation>Naam</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="259"/>
        <source>File System</source>
        <translation>Bestandssysteem</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="261"/>
        <source>Mount Point</source>
        <translation>Aankoppelpunt</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="263"/>
        <source>Size</source>
        <translation>Grootte</translation>
    </message>
</context>
<context>
    <name>PartitionPage</name>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="22"/>
        <source>Storage de&amp;vice:</source>
        <translation>&amp;Opslagmedium:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="51"/>
        <source>&amp;Revert All Changes</source>
        <translation>Alle wijzigingen &amp;ongedaan maken</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="87"/>
        <source>New Partition &amp;Table</source>
        <translation>Nieuwe Partitie &amp; Tabel</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="107"/>
        <source>&amp;Create</source>
        <translation>&amp;Maak</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="114"/>
        <source>&amp;Edit</source>
        <translation>&amp;Bewerken</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="121"/>
        <source>&amp;Delete</source>
        <translation>&amp;Verwijderen</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="148"/>
        <source>Install boot &amp;loader on:</source>
        <translation>Installeer boot&amp;loader op:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.cpp" line="169"/>
        <source>Are you sure you want to create a new partition table on %1?</source>
        <translation>Weet u zeker dat u een nieuwe partitie tabel wil maken op %1?</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.cpp" line="193"/>
        <source>Can not create new partition</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.cpp" line="194"/>
        <source>The partition table on %1 already has %2 primary partitions, and no more can be added. Please remove one primary partition and add an extended partition, instead.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>PartitionViewStep</name>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="70"/>
        <source>Gathering system information...</source>
        <translation>Systeeminformatie verzamelen...</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="121"/>
        <source>Partitions</source>
        <translation>Partities</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="158"/>
        <source>Install %1 &lt;strong&gt;alongside&lt;/strong&gt; another operating system.</source>
        <translation>Installeer %1 &lt;strong&gt;naast&lt;/strong&gt; een ander besturingssysteem.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="162"/>
        <source>&lt;strong&gt;Erase&lt;/strong&gt; disk and install %1.</source>
        <translation>&lt;strong&gt;Wis&lt;/strong&gt; schijf en installeer %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="166"/>
        <source>&lt;strong&gt;Replace&lt;/strong&gt; a partition with %1.</source>
        <translation>&lt;strong&gt;Vervang&lt;/strong&gt; een partitie met %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="171"/>
        <source>&lt;strong&gt;Manual&lt;/strong&gt; partitioning.</source>
        <translation>&lt;strong&gt;Handmatig&lt;/strong&gt; partitioneren.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="184"/>
        <source>Install %1 &lt;strong&gt;alongside&lt;/strong&gt; another operating system on disk &lt;strong&gt;%2&lt;/strong&gt; (%3).</source>
        <translation>Installeer %1 &lt;strong&gt;naast&lt;/strong&gt; een ander besturingssysteem op schijf &lt;strong&gt;%2&lt;/strong&gt; (%3).</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="190"/>
        <source>&lt;strong&gt;Erase&lt;/strong&gt; disk &lt;strong&gt;%2&lt;/strong&gt; (%3) and install %1.</source>
        <translation>&lt;strong&gt;Wis&lt;/strong&gt; schijf &lt;strong&gt;%2&lt;/strong&gt; (%3) en installeer %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="196"/>
        <source>&lt;strong&gt;Replace&lt;/strong&gt; a partition on disk &lt;strong&gt;%2&lt;/strong&gt; (%3) with %1.</source>
        <translation>&lt;strong&gt;Vervang&lt;/strong&gt; een partitie op schijf &lt;strong&gt;%2&lt;/strong&gt; (%3) met %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="203"/>
        <source>&lt;strong&gt;Manual&lt;/strong&gt; partitioning on disk &lt;strong&gt;%1&lt;/strong&gt; (%2).</source>
        <translation>&lt;strong&gt;Handmatig&lt;/strong&gt; partitioneren van schijf &lt;strong&gt;%1&lt;/strong&gt; (%2).</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="211"/>
        <source>Disk &lt;strong&gt;%1&lt;/strong&gt; (%2)</source>
        <translation>Schijf &lt;strong&gt;%1&lt;/strong&gt; (%2)</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="239"/>
        <source>Current:</source>
        <translation>Huidig:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="256"/>
        <source>After:</source>
        <translation>Na:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="399"/>
        <source>No EFI system partition configured</source>
        <translation>Geen EFI systeempartitie geconfigureerd</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="400"/>
        <source>An EFI system partition is necessary to start %1.&lt;br/&gt;&lt;br/&gt;To configure an EFI system partition, go back and select or create a FAT32 filesystem with the &lt;strong&gt;esp&lt;/strong&gt; flag enabled and mount point &lt;strong&gt;%2&lt;/strong&gt;.&lt;br/&gt;&lt;br/&gt;You can continue without setting up an EFI system partition but your system may fail to start.</source>
        <translation>Een EFI systeempartitie is vereist om %1 te starten.&lt;br/&gt;&lt;br/&gt;Om een EFI systeempartitie in te stellen, ga terug en selecteer of maak een FAT32 bestandssysteem met de &lt;strong&gt;esp&lt;/strong&gt;-vlag aangevinkt en aankoppelpunt &lt;strong&gt;%2&lt;/strong&gt;.&lt;br/&gt;&lt;br/&gt;Je kan verdergaan zonder een EFI systeempartitie, maar mogelijk start je systeem dan niet op.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="413"/>
        <source>EFI system partition flag not set</source>
        <translation>EFI-systeem partitievlag niet ingesteld.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="414"/>
        <source>An EFI system partition is necessary to start %1.&lt;br/&gt;&lt;br/&gt;A partition was configured with mount point &lt;strong&gt;%2&lt;/strong&gt; but its &lt;strong&gt;esp&lt;/strong&gt; flag is not set.&lt;br/&gt;To set the flag, go back and edit the partition.&lt;br/&gt;&lt;br/&gt;You can continue without setting the flag but your system may fail to start.</source>
        <translation>Een EFI systeempartitie is vereist om %1 op te starten.&lt;br/&gt;&lt;br/&gt;Een partitie is ingesteld met aankoppelpunt &lt;strong&gt;%2&lt;/strong&gt;, maar de de &lt;strong&gt;esp&lt;/strong&gt;-vlag is niet aangevinkt.&lt;br/&gt;Om deze vlag aan te vinken, ga terug en pas de partitie aan.&lt;br/&gt;&lt;br/&gt;Je kan verdergaan zonder deze vlag, maar mogelijk start je systeem dan niet op.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="449"/>
        <source>Boot partition not encrypted</source>
        <translation>Bootpartitie niet versleuteld</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="450"/>
        <source>A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted.&lt;br/&gt;&lt;br/&gt;There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition.&lt;br/&gt;You may continue if you wish, but filesystem unlocking will happen later during system startup.&lt;br/&gt;To encrypt the boot partition, go back and recreate it, selecting &lt;strong&gt;Encrypt&lt;/strong&gt; in the partition creation window.</source>
        <translation>Een aparte bootpartitie was ingesteld samen met een versleutelde rootpartitie, maar de bootpartitie zelf is niet versleuteld.&lt;br/&gt;&lt;br/&gt;Dit is niet volledig veilig, aangezien belangrijke systeembestanden bewaard worden op een niet-versleutelde partitie.&lt;br/&gt;Je kan doorgaan als je wil, maar het ontgrendelen van bestandssystemen zal tijdens het opstarten later plaatsvinden.&lt;br/&gt;Om de bootpartitie toch te versleutelen: keer terug en maak de bootpartitie opnieuw, waarbij je &lt;strong&gt;Versleutelen&lt;/strong&gt; aanvinkt in het venster partitie aanmaken. </translation>
    </message>
</context>
<context>
    <name>PlasmaLnfJob</name>
    <message>
        <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="41"/>
        <source>Plasma Look-and-Feel Job</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="73"/>
        <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="74"/>
        <source>Could not select KDE Plasma Look-and-Feel package</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>PlasmaLnfPage</name>
    <message>
        <location filename="../src/modules/plasmalnf/page_plasmalnf.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/modules/plasmalnf/page_plasmalnf.ui" line="20"/>
        <source>Placeholder</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/plasmalnf/PlasmaLnfPage.cpp" line="67"/>
        <source>Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is installed. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>PlasmaLnfViewStep</name>
    <message>
        <location filename="../src/modules/plasmalnf/PlasmaLnfViewStep.cpp" line="68"/>
        <source>Look-and-Feel</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>ProcessResult</name>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="271"/>
        <source>
There was no output from the command.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="272"/>
        <source>
Output:
</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="275"/>
        <source>External command crashed.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="276"/>
        <source>Command &lt;i&gt;%1&lt;/i&gt; crashed.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="281"/>
        <source>External command failed to start.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="282"/>
        <source>Command &lt;i&gt;%1&lt;/i&gt; failed to start.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="286"/>
        <source>Internal error when starting command.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="287"/>
        <source>Bad parameters for process job call.</source>
        <translation>Onjuiste parameters voor procestaak</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="290"/>
        <source>External command failed to finish.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="291"/>
        <source>Command &lt;i&gt;%1&lt;/i&gt; failed to finish in %2 seconds.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="297"/>
        <source>External command finished with errors.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="298"/>
        <source>Command &lt;i&gt;%1&lt;/i&gt; finished with exit code %2.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="82"/>
        <source>Default Keyboard Model</source>
        <translation>Standaard Toetsenbord Model</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="127"/>
        <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="163"/>
        <source>Default</source>
        <translation>Standaard</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="206"/>
        <source>unknown</source>
        <translation>onbekend</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="208"/>
        <source>extended</source>
        <translation>uitgebreid</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="210"/>
        <source>unformatted</source>
        <translation>niet-geformateerd</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="212"/>
        <source>swap</source>
        <translation>wisselgeheugen</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="49"/>
        <source>Unpartitioned space or unknown partition table</source>
        <translation>Niet-gepartitioneerde ruimte of onbekende partitietabel</translation>
    </message>
</context>
<context>
    <name>ReplaceWidget</name>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="134"/>
        <source>Select where to install %1.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Warning: &lt;/font&gt;this will delete all files on the selected partition.</source>
        <translation>Kies waar %1 te installeren. &lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Opgelet: &lt;/font&gt;dit zal alle bestanden op de geselecteerde partitie wissen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="160"/>
        <source>The selected item does not appear to be a valid partition.</source>
        <translation>Het geselecteerde item is geen geldige partitie.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="168"/>
        <source>%1 cannot be installed on empty space. Please select an existing partition.</source>
        <translation>%1 kan niet worden geïnstalleerd op lege ruimte. Kies een bestaande partitie.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="178"/>
        <source>%1 cannot be installed on an extended partition. Please select an existing primary or logical partition.</source>
        <translation>%1 kan niet op een uitgebreide partitie geïnstalleerd worden. Kies een bestaande primaire of logische partitie.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="188"/>
        <source>%1 cannot be installed on this partition.</source>
        <translation>%1 kan niet op deze partitie geïnstalleerd worden.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="194"/>
        <source>Data partition (%1)</source>
        <translation>Gegevenspartitie (%1)</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="211"/>
        <source>Unknown system partition (%1)</source>
        <translation>Onbekende systeempartitie (%1)</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="216"/>
        <source>%1 system partition (%2)</source>
        <translation>%1 systeempartitie (%2)</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="227"/>
        <source>&lt;strong&gt;%4&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;The partition %1 is too small for %2. Please select a partition with capacity at least %3 GiB.</source>
        <translation>&lt;strong&gt;%4&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;Partitie %1 is te klein voor %2. Gelieve een partitie te selecteren met een capaciteit van minstens %3 GiB.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="250"/>
        <source>&lt;strong&gt;%2&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source>
        <translation>&lt;strong&gt;%2&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;Er werd geen EFI systeempartite gevonden op dit systeem. Gelieve terug te keren en manueel te partitioneren om %1 in te stellen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="261"/>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="278"/>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="302"/>
        <source>&lt;strong&gt;%3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;%1 will be installed on %2.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Warning: &lt;/font&gt;all data on partition %2 will be lost.</source>
        <translation>&lt;strong&gt;%3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;%1 zal geïnstalleerd worden op %2.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Opgelet: &lt;/font&gt;alle gegevens op partitie %2 zullen verloren gaan.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="270"/>
        <source>The EFI system partition at %1 will be used for starting %2.</source>
        <translation>De EFI systeempartitie op %1 zal gebruikt worden om %2 te starten.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="286"/>
        <source>EFI system partition:</source>
        <translation>EFI systeempartitie:</translation>
    </message>
</context>
<context>
    <name>RequirementsChecker</name>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="68"/>
        <source>Gathering system information...</source>
        <translation>Systeeminformatie verzamelen...</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="118"/>
        <source>has at least %1 GB available drive space</source>
        <translation>tenminste %1 GB vrije schijfruimte heeft</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="120"/>
        <source>There is not enough drive space. At least %1 GB is required.</source>
        <translation>Er is onvoldoende vrije schijfruimte. Tenminste %1 GB is vereist.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="128"/>
        <source>has at least %1 GB working memory</source>
        <translation>tenminste %1 GB werkgeheugen heeft</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="130"/>
        <source>The system does not have enough working memory. At least %1 GB is required.</source>
        <translation>Dit systeem heeft onvoldoende werkgeheugen. Tenminste %1 GB is vereist.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="138"/>
        <source>is plugged in to a power source</source>
        <translation>aangesloten is op netstroom</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="139"/>
        <source>The system is not plugged in to a power source.</source>
        <translation>Dit systeem is niet aangesloten op netstroom. </translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="146"/>
        <source>is connected to the Internet</source>
        <translation>verbonden is met het Internet</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="147"/>
        <source>The system is not connected to the Internet.</source>
        <translation>Dit systeem is niet verbonden met het Internet.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="155"/>
        <source>The installer is not running with administrator rights.</source>
        <translation>Het installatieprogramma draait zonder administratorrechten.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="163"/>
        <source>The screen is too small to display the installer.</source>
        <translation>Het schem is te klein on het installatieprogramma te vertonen.</translation>
    </message>
</context>
<context>
    <name>ResizePartitionJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="48"/>
        <source>Resize partition %1.</source>
        <translation>Pas de grootte van partitie %1 aan.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="55"/>
        <source>Resize &lt;strong&gt;%2MB&lt;/strong&gt; partition &lt;strong&gt;%1&lt;/strong&gt; to &lt;strong&gt;%3MB&lt;/strong&gt;.</source>
        <translation>Herschaal de &lt;strong&gt;%2MB&lt;/strong&gt; partitie &lt;strong&gt;%1&lt;/strong&gt; naar &lt;strong&gt;%3MB&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="66"/>
        <source>Resizing %2MB partition %1 to %3MB.</source>
        <translation>Pas de %2MB partitie %1 aan naar %3MB.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="85"/>
        <source>The installer failed to resize partition %1 on disk &apos;%2&apos;.</source>
        <translation>Installatieprogramma is er niet in geslaagd om de grootte van partitie %1 op schrijf %2 aan te passen.</translation>
    </message>
</context>
<context>
    <name>ScanningDialog</name>
    <message>
        <location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="84"/>
        <source>Scanning storage devices...</source>
        <translation>Opslagmedia inlezen...</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="85"/>
        <source>Partitioning</source>
        <translation>Partitionering</translation>
    </message>
</context>
<context>
    <name>SetHostNameJob</name>
    <message>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="37"/>
        <source>Set hostname %1</source>
        <translation>Instellen hostnaam %1</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="44"/>
        <source>Set hostname &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Instellen hostnaam &lt;strong&gt;%1&lt;/strong&gt; </translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="51"/>
        <source>Setting hostname %1.</source>
        <translation>Hostnaam %1 instellen.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="61"/>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="68"/>
        <source>Internal Error</source>
        <translation>Interne Fout</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="75"/>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="86"/>
        <source>Cannot write hostname to target system</source>
        <translation>Kan de hostnaam niet naar doelsysteem schrijven</translation>
    </message>
</context>
<context>
    <name>SetKeyboardLayoutJob</name>
    <message>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="59"/>
        <source>Set keyboard model to %1, layout to %2-%3</source>
        <translation>Stel toetsenbordmodel in op %1 ,indeling  op %2-%3</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="318"/>
        <source>Failed to write keyboard configuration for the virtual console.</source>
        <translation>Kon de toetsenbordconfiguratie voor de virtuele console niet opslaan.</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="319"/>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="323"/>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="329"/>
        <source>Failed to write to %1</source>
        <translation>Schrijven naar %1 mislukt</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="322"/>
        <source>Failed to write keyboard configuration for X11.</source>
        <translation>Schrijven toetsenbord configuratie voor X11 mislukt.</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="328"/>
        <source>Failed to write keyboard configuration to existing /etc/default directory.</source>
        <translation>Kon de toetsenbordconfiguratie niet wegschrijven naar de bestaande /etc/default map.</translation>
    </message>
</context>
<context>
    <name>SetPartFlagsJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="49"/>
        <source>Set flags on partition %1.</source>
        <translation>Stel vlaggen in op partitie %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="52"/>
        <source>Set flags on %1MB %2 partition.</source>
        <translation>Stel vlaggen in op %1MB %2 partitie.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="56"/>
        <source>Set flags on new partition.</source>
        <translation>Stel vlaggen in op nieuwe partitie.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="67"/>
        <source>Clear flags on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Wis vlaggen op partitie &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="71"/>
        <source>Clear flags on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
        <translation>Wis vlaggen op %1MB &lt;strong&gt;%2&lt;/strong&gt; partitie.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="75"/>
        <source>Clear flags on new partition.</source>
        <translation>Wis vlaggen op nieuwe partitie.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="79"/>
        <source>Flag partition &lt;strong&gt;%1&lt;/strong&gt; as &lt;strong&gt;%2&lt;/strong&gt;.</source>
        <translation>Partitie &lt;strong&gt;%1&lt;/strong&gt; als &lt;strong&gt;%2&lt;/strong&gt; vlaggen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="85"/>
        <source>Flag %1MB &lt;strong&gt;%2&lt;/strong&gt; partition as &lt;strong&gt;%3&lt;/strong&gt;.</source>
        <translation>Vlag %1MB &lt;strong&gt;%2&lt;/strong&gt; partitie als &lt;strong&gt;%3&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="91"/>
        <source>Flag new partition as &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Vlag nieuwe partitie als &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="103"/>
        <source>Clearing flags on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Vlaggen op partitie &lt;strong&gt;%1&lt;/strong&gt; wissen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="107"/>
        <source>Clearing flags on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
        <translation>Vlaggen op %1MB &lt;strong&gt;%2&lt;/strong&gt; partitie wissen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="111"/>
        <source>Clearing flags on new partition.</source>
        <translation>Vlaggen op nieuwe partitie wissen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="115"/>
        <source>Setting flags &lt;strong&gt;%2&lt;/strong&gt; on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Vlaggen &lt;strong&gt;%2&lt;/strong&gt; op partitie &lt;strong&gt;%1&lt;/strong&gt; instellen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="121"/>
        <source>Setting flags &lt;strong&gt;%3&lt;/strong&gt; on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
        <translation>Vlaggen &lt;strong&gt;%3&lt;/strong&gt; op %1MB &lt;strong&gt;%2&lt;/strong&gt; partitie instellen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="127"/>
        <source>Setting flags &lt;strong&gt;%1&lt;/strong&gt; on new partition.</source>
        <translation>Vlaggen &lt;strong&gt;%1&lt;/strong&gt; op nieuwe partitie instellen.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="140"/>
        <source>The installer failed to set flags on partition %1.</source>
        <translation>Het installatieprogramma kon geen vlaggen instellen op partitie %1.</translation>
    </message>
</context>
<context>
    <name>SetPasswordJob</name>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="48"/>
        <source>Set password for user %1</source>
        <translation>Instellen wachtwoord voor gebruiker %1</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="55"/>
        <source>Setting password for user %1.</source>
        <translation>Wachtwoord instellen voor gebruiker %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="112"/>
        <source>Bad destination system path.</source>
        <translation>Onjuiste bestemming systeempad.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="113"/>
        <source>rootMountPoint is %1</source>
        <translation>rootMountPoint is %1</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="123"/>
        <source>Cannot disable root account.</source>
        <translation>Kan root account niet uitschakelen.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="124"/>
        <source>passwd terminated with error code %1.</source>
        <translation>passwd is afgesloten met foutcode %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="139"/>
        <source>Cannot set password for user %1.</source>
        <translation>Kan het wachtwoord niet instellen voor gebruiker %1 </translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="141"/>
        <source>usermod terminated with error code %1.</source>
        <translation>usermod beëindigd met foutcode %1.</translation>
    </message>
</context>
<context>
    <name>SetTimezoneJob</name>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="43"/>
        <source>Set timezone to %1/%2</source>
        <translation>Instellen tijdzone naar %1/%2</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="71"/>
        <source>Cannot access selected timezone path.</source>
        <translation>Kan geen toegang krijgen tot het geselecteerde tijdzone pad.</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="72"/>
        <source>Bad path: %1</source>
        <translation>Onjuist pad: %1</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="86"/>
        <source>Cannot set timezone.</source>
        <translation>Kan tijdzone niet instellen.</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="87"/>
        <source>Link creation failed, target: %1; link name: %2</source>
        <translation>Link maken mislukt, doel: %1; koppeling naam: %2</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="96"/>
        <source>Cannot set timezone,</source>
        <translation>Kan de tijdzone niet instellen,</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="97"/>
        <source>Cannot open /etc/timezone for writing</source>
        <translation>Kan niet schrijven naar /etc/timezone</translation>
    </message>
</context>
<context>
    <name>ShellProcessJob</name>
    <message>
        <location filename="../src/modules/shellprocess/ShellProcessJob.cpp" line="51"/>
        <source>Shell Processes Job</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>SlideCounter</name>
    <message>
        <location filename="../src/qml/calamares/slideshow/SlideCounter.qml" line="36"/>
        <source>%L1 / %L2</source>
        <extracomment>slide counter, %1 of %2 (numeric)</extracomment>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>SummaryPage</name>
    <message>
        <location filename="../src/modules/summary/SummaryPage.cpp" line="49"/>
        <source>This is an overview of what will happen once you start the install procedure.</source>
        <translation>Dit is een overzicht van wat zal gebeuren wanneer je de installatieprocedure start.</translation>
    </message>
</context>
<context>
    <name>SummaryViewStep</name>
    <message>
        <location filename="../src/modules/summary/SummaryViewStep.cpp" line="43"/>
        <source>Summary</source>
        <translation>Samenvatting</translation>
    </message>
</context>
<context>
    <name>TrackingInstallJob</name>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="43"/>
        <source>Installation feedback</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="53"/>
        <source>Sending installation feedback.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="88"/>
        <source>Internal error in install-tracking.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="89"/>
        <source>HTTP request timed out.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>TrackingMachineNeonJob</name>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="104"/>
        <source>Machine feedback</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="114"/>
        <source>Configuring machine feedback.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="133"/>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="136"/>
        <source>Error in machine feedback configuration.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="134"/>
        <source>Could not configure machine feedback correctly, script error %1.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="137"/>
        <source>Could not configure machine feedback correctly, Calamares error %1.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>TrackingPage</name>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="24"/>
        <source>Placeholder</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="72"/>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;By selecting this, you will send &lt;span style=&quot; font-weight:600;&quot;&gt;no information at all&lt;/span&gt; about your installation.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="123"/>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="185"/>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="247"/>
        <source>TextLabel</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="133"/>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="195"/>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="257"/>
        <source>...</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="271"/>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;a href=&quot;placeholder&quot;&gt;&lt;span style=&quot; text-decoration: underline; color:#2980b9;&quot;&gt;Click here for more information about user feedback&lt;/span&gt;&lt;/a&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingPage.cpp" line="44"/>
        <source>Install tracking helps %1 to see how many users they have, what hardware they install %1 to and (with the last two options below), get continuous information about preferred applications. To see what will be sent, please click the help icon next to each area.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingPage.cpp" line="45"/>
        <source>By selecting this you will send information about your installation and hardware. This information will &lt;b&gt;only be sent once&lt;/b&gt; after the installation finishes.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingPage.cpp" line="46"/>
        <source>By selecting this you will &lt;b&gt;periodically&lt;/b&gt; send information about your installation, hardware and applications, to %1.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingPage.cpp" line="47"/>
        <source>By selecting this you will &lt;b&gt;regularly&lt;/b&gt; send information about your installation, hardware, applications and usage patterns, to %1.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>TrackingViewStep</name>
    <message>
        <location filename="../src/modules/tracking/TrackingViewStep.cpp" line="59"/>
        <source>Feedback</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>UsersPage</name>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="289"/>
        <source>Your username is too long.</source>
        <translation>De gebruikersnaam is te lang.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="295"/>
        <source>Your username contains invalid characters. Only lowercase letters and numbers are allowed.</source>
        <translation>De gebruikersnaam bevat ongeldige tekens.  Enkel kleine letters en nummers zijn toegelaten.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="333"/>
        <source>Your hostname is too short.</source>
        <translation>De hostnaam is te kort.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="339"/>
        <source>Your hostname is too long.</source>
        <translation>De hostnaam is te lang.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="345"/>
        <source>Your hostname contains invalid characters. Only letters, numbers and dashes are allowed.</source>
        <translation>De hostnaam bevat ongeldige tekens.  Enkel letters, cijfers en liggende streepjes zijn toegelaten.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="373"/>
        <location filename="../src/modules/users/UsersPage.cpp" line="417"/>
        <source>Your passwords do not match!</source>
        <translation>Je wachtwoorden komen niet overeen!</translation>
    </message>
</context>
<context>
    <name>UsersViewStep</name>
    <message>
        <location filename="../src/modules/users/UsersViewStep.cpp" line="51"/>
        <source>Users</source>
        <translation>Gebruikers</translation>
    </message>
</context>
<context>
    <name>WelcomePage</name>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="14"/>
        <source>Form</source>
        <translation>Formulier</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="75"/>
        <source>&amp;Language:</source>
        <translation>Taa&amp;l:</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="176"/>
        <source>&amp;Release notes</source>
        <translation>Uitgaveopme&amp;rkingen</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="166"/>
        <source>&amp;Known issues</source>
        <translation>Ge&amp;kende problemen</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="156"/>
        <source>&amp;Support</source>
        <translation>Onder&amp;steuning</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="146"/>
        <source>&amp;About</source>
        <translation>&amp;Over</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.cpp" line="60"/>
        <source>&lt;h1&gt;Welcome to the %1 installer.&lt;/h1&gt;</source>
        <translation>&lt;h1&gt;Welkom in het %1 installatieprogramma.&lt;/h1&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.cpp" line="60"/>
        <source>&lt;h1&gt;Welcome to the Calamares installer for %1.&lt;/h1&gt;</source>
        <translation>&lt;h1&gt;Welkom in het Calamares installatieprogramma voor %1.&lt;/h1&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.cpp" line="73"/>
        <source>About %1 installer</source>
        <translation>Over het %1 installatieprogramma</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.cpp" line="75"/>
        <source>&lt;h1&gt;%1&lt;/h1&gt;&lt;br/&gt;&lt;strong&gt;%2&lt;br/&gt;for %3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;Copyright 2014-2017 Teo Mrnjavac &amp;lt;teo@kde.org&amp;gt;&lt;br/&gt;Copyright 2017 Adriaan de Groot &amp;lt;groot@kde.org&amp;gt;&lt;br/&gt;Thanks to: Anke Boersma, Aurélien Gâteau, Kevin Kofler, Lisa Vitolo, Philip Müller, Pier Luigi Fiorini, Rohan Garg and the &lt;a href=&quot;https://www.transifex.com/calamares/calamares/&quot;&gt;Calamares translators team&lt;/a&gt;.&lt;br/&gt;&lt;br/&gt;&lt;a href=&quot;https://calamares.io/&quot;&gt;Calamares&lt;/a&gt; development is sponsored by &lt;br/&gt;&lt;a href=&quot;http://www.blue-systems.com/&quot;&gt;Blue Systems&lt;/a&gt; - Liberating Software.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.cpp" line="290"/>
        <source>%1 support</source>
        <translation>%1 ondersteuning</translation>
    </message>
</context>
<context>
    <name>WelcomeViewStep</name>
    <message>
        <location filename="../src/modules/welcome/WelcomeViewStep.cpp" line="51"/>
        <source>Welcome</source>
        <translation>Welkom</translation>
    </message>
</context>
</TS>