calamares/lang/calamares_es_MX.ts

<?xml version="1.0" ?><!DOCTYPE TS><TS language="es_MX" version="2.1">
<context>
    <name>BootInfoWidget</name>
    <message>
        <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="69"/>
        <source>The &lt;strong&gt;boot environment&lt;/strong&gt; of this system.&lt;br&gt;&lt;br&gt;Older x86 systems only support &lt;strong&gt;BIOS&lt;/strong&gt;.&lt;br&gt;Modern systems usually use &lt;strong&gt;EFI&lt;/strong&gt;, but may also show up as BIOS if started in compatibility mode.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="79"/>
        <source>This system was started with an &lt;strong&gt;EFI&lt;/strong&gt; boot environment.&lt;br&gt;&lt;br&gt;To configure startup from an EFI environment, this installer must deploy a boot loader application, like &lt;strong&gt;GRUB&lt;/strong&gt; or &lt;strong&gt;systemd-boot&lt;/strong&gt; on an &lt;strong&gt;EFI System Partition&lt;/strong&gt;. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="91"/>
        <source>This system was started with a &lt;strong&gt;BIOS&lt;/strong&gt; boot environment.&lt;br&gt;&lt;br&gt;To configure startup from a BIOS environment, this installer must install a boot loader, like &lt;strong&gt;GRUB&lt;/strong&gt;, either at the beginning of a partition or on the &lt;strong&gt;Master Boot Record&lt;/strong&gt; near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>BootLoaderModel</name>
    <message>
        <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="59"/>
        <source>Master Boot Record of %1</source>
        <translation>Master Boot Record de %1</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="76"/>
        <source>Boot Partition</source>
        <translation>Partición de arranque</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="81"/>
        <source>System Partition</source>
        <translation>Partición del Sistema</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="111"/>
        <source>Do not install a boot loader</source>
        <translation> No instalar el gestor de arranque</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="125"/>
        <source>%1 (%2)</source>
        <translation>%1 (%2)</translation>
    </message>
</context>
<context>
    <name>Calamares::DebugWindow</name>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="14"/>
        <source>Form</source>
        <translation>Formulario</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="24"/>
        <source>GlobalStorage</source>
        <translation>Almacenamiento Global</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="34"/>
        <source>JobQueue</source>
        <translation>Cola de trabajo</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="44"/>
        <source>Modules</source>
        <translation>Módulos</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="57"/>
        <source>Type:</source>
        <translation>Tipo:</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="64"/>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="78"/>
        <source>none</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="71"/>
        <source>Interface:</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="93"/>
        <source>Tools</source>
        <translation>Herramientas</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/utils/DebugWindow.cpp" line="182"/>
        <source>Debug information</source>
        <translation>Información de depuración</translation>
    </message>
</context>
<context>
    <name>Calamares::ExecutionViewStep</name>
    <message>
        <location filename="../src/libcalamaresui/ExecutionViewStep.cpp" line="78"/>
        <source>Install</source>
        <translation>Instalar</translation>
    </message>
</context>
<context>
    <name>Calamares::JobThread</name>
    <message>
        <location filename="../src/libcalamares/JobQueue.cpp" line="86"/>
        <source>Done</source>
        <translation>Hecho</translation>
    </message>
</context>
<context>
    <name>Calamares::ProcessJob</name>
    <message>
        <location filename="../src/libcalamares/ProcessJob.cpp" line="51"/>
        <source>Run command %1 %2</source>
        <translation>Ejecutar comando %1 %2</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/ProcessJob.cpp" line="60"/>
        <source>Running command %1 %2</source>
        <translation> Ejecutando comando %1 %2</translation>
    </message>
</context>
<context>
    <name>Calamares::PythonJob</name>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="272"/>
        <source>Running %1 operation.</source>
        <translation>Ejecutando operación %1.</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="287"/>
        <source>Bad working directory path</source>
        <translation>Ruta a la carpeta de trabajo errónea</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="288"/>
        <source>Working directory %1 for python job %2 is not readable.</source>
        <translation>La carpeta de trabajo %1 para la tarea de python %2 no se pudo leer.</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="298"/>
        <source>Bad main script file</source>
        <translation>Script principal erróneo</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="299"/>
        <source>Main script file %1 for python job %2 is not readable.</source>
        <translation>El script principal %1 del proceso python %2 no es accesible.</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonJob.cpp" line="375"/>
        <source>Boost.Python error in job &quot;%1&quot;.</source>
        <translation>Error Boost.Python en el proceso &quot;%1&quot;.</translation>
    </message>
</context>
<context>
    <name>Calamares::ViewManager</name>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="73"/>
        <source>&amp;Back</source>
        <translation>&amp;Atrás </translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="74"/>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="257"/>
        <source>&amp;Next</source>
        <translation>&amp;Siguiente</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="75"/>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="266"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="76"/>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="267"/>
        <source>Cancel installation without changing the system.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="255"/>
        <source>&amp;Install</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="303"/>
        <source>Cancel installation?</source>
        <translation>Cancelar la instalación?</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="304"/>
        <source>Do you really want to cancel the current install process?
The installer will quit and all changes will be lost.</source>
        <translation>Realmente desea cancelar el proceso de instalación actual?
El instalador terminará y se perderán todos los cambios.</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="309"/>
        <source>&amp;Yes</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="310"/>
        <source>&amp;No</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="162"/>
        <source>&amp;Close</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="215"/>
        <source>Continue with setup?</source>
        <translation>Continuar con la instalación?</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="216"/>
        <source>The %1 installer is about to make changes to your disk in order to install %2.&lt;br/&gt;&lt;strong&gt;You will not be able to undo these changes.&lt;/strong&gt;</source>
        <translation> El instalador %1 va a realizar cambios en su disco para instalar %2.&lt;br/&gt;&lt;strong&gt;No podrá deshacer estos cambios.&lt;/strong&gt;</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="221"/>
        <source>&amp;Install now</source>
        <translation>&amp;Instalar ahora</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="222"/>
        <source>Go &amp;back</source>
        <translation>&amp;Regresar</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="261"/>
        <source>&amp;Done</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="262"/>
        <source>The installation is complete. Close the installer.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="159"/>
        <source>Error</source>
        <translation>Error</translation>
    </message>
    <message>
        <location filename="../src/libcalamaresui/ViewManager.cpp" line="160"/>
        <source>Installation Failed</source>
        <translation>Instalación Fallida</translation>
    </message>
</context>
<context>
    <name>CalamaresPython::Helper</name>
    <message>
        <location filename="../src/libcalamares/PythonHelper.cpp" line="270"/>
        <source>Unknown exception type</source>
        <translation>Excepción desconocida</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonHelper.cpp" line="284"/>
        <source>unparseable Python error</source>
        <translation>error no analizable Python</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonHelper.cpp" line="324"/>
        <source>unparseable Python traceback</source>
        <translation>rastreo de Python no analizable</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/PythonHelper.cpp" line="329"/>
        <source>Unfetchable Python error.</source>
        <translation>Error de Python Unfetchable.</translation>
    </message>
</context>
<context>
    <name>CalamaresWindow</name>
    <message>
        <location filename="../src/calamares/CalamaresWindow.cpp" line="44"/>
        <source>%1 Installer</source>
        <translation>%1 Instalador</translation>
    </message>
    <message>
        <location filename="../src/calamares/CalamaresWindow.cpp" line="111"/>
        <source>Show debug information</source>
        <translation>Mostrar información de depuración</translation>
    </message>
</context>
<context>
    <name>CheckerWidget</name>
    <message>
        <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="96"/>
        <source>This computer does not satisfy the minimum requirements for installing %1.&lt;br/&gt;Installation cannot continue. &lt;a href=&quot;#details&quot;&gt;Details...&lt;/a&gt;</source>
        <translation> Este equipo no cumple los requisitos mínimos para la instalación. %1.&lt;br/&gt;La instalación no puede continuar. &lt;a href=&quot;#details&quot;&gt;Detalles...&lt;/a&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="113"/>
        <source>This computer does not satisfy some of the recommended requirements for installing %1.&lt;br/&gt;Installation can continue, but some features might be disabled.</source>
        <translation> Este equipo no cumple alguno de los requisitos recomendados para la instalación %1.&lt;br/&gt;La instalación puede continuar, pero algunas funcionalidades podrían ser deshabilitadas.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="151"/>
        <source>This program will ask you some questions and set up %2 on your computer.</source>
        <translation> El programa le hará algunas preguntas y configurará %2 en su ordenador.
</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="174"/>
        <source>For best results, please ensure that this computer:</source>
        <translation>Para mejores resultados, por favor verifique que esta computadora:</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="202"/>
        <source>System requirements</source>
        <translation>Requisitos de sistema</translation>
    </message>
</context>
<context>
    <name>ChoicePage</name>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.ui" line="14"/>
        <source>Form</source>
        <translation>Formulario</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="128"/>
        <source>After:</source>
        <translation>Después:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="235"/>
        <source>&lt;strong&gt;Manual partitioning&lt;/strong&gt;&lt;br/&gt;You can create or resize partitions yourself.</source>
        <translation>&lt;strong&gt;Particionado manual &lt;/strong&gt;&lt;br/&gt; Puede crear o cambiar el tamaño de las particiones usted mismo.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="998"/>
        <source>Boot loader location:</source>
        <translation>Ubicación del cargador de arranque:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="942"/>
        <source>%1 will be shrunk to %2MB and a new %3MB partition will be created for %4.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="126"/>
        <source>Select storage de&amp;vice:</source>
        <translation>Seleccionar dispositivo de almacenamiento:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="127"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="924"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="970"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1049"/>
        <source>Current:</source>
        <translation>Actual:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="795"/>
        <source>Reuse %1 as home partition for %2.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="925"/>
        <source>&lt;strong&gt;Select a partition to shrink, then drag the bottom bar to resize&lt;/strong&gt;</source>
        <translation> &lt;strong&gt;Seleccione una partición para reducir el tamaño, a continuación, arrastre la barra inferior para redimencinar&lt;/strong&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1040"/>
        <source>&lt;strong&gt;Select a partition to install on&lt;/strong&gt;</source>
        <translation> &lt;strong&gt;Seleccione una partición para instalar&lt;/strong&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1096"/>
        <source>An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source>
        <translation>No se puede encontrar en el sistema una partición EFI. Por favor vuelva atrás y use el particionamiento manual para configurar %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1105"/>
        <source>The EFI system partition at %1 will be used for starting %2.</source>
        <translation>La partición EFI en %1 será usada para iniciar %2.
</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1113"/>
        <source>EFI system partition:</source>
        <translation>Partición de sistema EFI:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1200"/>
        <source>This storage device does not seem to have an operating system on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1205"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1242"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1264"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1288"/>
        <source>&lt;strong&gt;Erase disk&lt;/strong&gt;&lt;br/&gt;This will &lt;font color=&quot;red&quot;&gt;delete&lt;/font&gt; all data currently present on the selected storage device.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1232"/>
        <source>This storage device has %1 on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1209"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1238"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1260"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1284"/>
        <source>&lt;strong&gt;Install alongside&lt;/strong&gt;&lt;br/&gt;The installer will shrink a partition to make room for %1.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1213"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1247"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1268"/>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1292"/>
        <source>&lt;strong&gt;Replace a partition&lt;/strong&gt;&lt;br/&gt;Replaces a partition with %1.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1255"/>
        <source>This storage device already has an operating system on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1279"/>
        <source>This storage device has multiple operating systems on it. What would you like to do?&lt;br/&gt;You will be able to review and confirm your choices before any change is made to the storage device.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>ClearMountsJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="45"/>
        <source>Clear mounts for partitioning operations on %1</source>
        <translation>&lt;b&gt;Instalar %1 en una partición existente&lt;/b&gt;&lt;br/&gt;Podrás elegir que partición borrar.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="53"/>
        <source>Clearing mounts for partitioning operations on %1.</source>
        <translation> Limpiar puntos de montaje para operaciones de particionamiento en %1</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="190"/>
        <source>Cleared all mounts for %1</source>
        <translation>Todas las unidades desmontadas en %1
</translation>
    </message>
</context>
<context>
    <name>ClearTempMountsJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="42"/>
        <source>Clear all temporary mounts.</source>
        <translation>Quitar todos los puntos de montaje temporales.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="49"/>
        <source>Clearing all temporary mounts.</source>
        <translation> Limpiando todos los puntos de montaje temporales.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="60"/>
        <source>Cannot get list of temporary mounts.</source>
        <translation>No se puede obtener la lista de puntos de montaje temporales.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="99"/>
        <source>Cleared all temporary mounts.</source>
        <translation>Se han quitado todos los puntos de montaje temporales.</translation>
    </message>
</context>
<context>
    <name>CommandList</name>
    <message>
        <location filename="../src/libcalamares/utils/CommandList.cpp" line="124"/>
        <source>Could not run command.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CommandList.cpp" line="125"/>
        <source>The command runs in the host environment and needs to know the root path, but no rootMountPoint is defined.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>ContextualProcessJob</name>
    <message>
        <location filename="../src/modules/contextualprocess/ContextualProcessJob.cpp" line="117"/>
        <source>Contextual Processes Job</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>CreatePartitionDialog</name>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="14"/>
        <source>Create a Partition</source>
        <translation>Crear partición</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="48"/>
        <source> MiB</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="55"/>
        <source>Partition &amp;Type:</source>
        <translation>&amp;Tipo de partición:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="67"/>
        <source>&amp;Primary</source>
        <translation>&amp;Primaria</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="77"/>
        <source>E&amp;xtended</source>
        <translation>E&amp;xtendida</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="119"/>
        <source>Fi&amp;le System:</source>
        <translation>Sis&amp;tema de Archivos:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="151"/>
        <source>LVM LV name</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="188"/>
        <source>Flags:</source>
        <translation>Banderas:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="161"/>
        <source>&amp;Mount Point:</source>
        <translation>Punto de &amp;montaje:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="38"/>
        <source>Si&amp;ze:</source>
        <translation>&amp;Tamaño:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="69"/>
        <source>En&amp;crypt</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="148"/>
        <source>Logical</source>
        <translation>Lógica</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="153"/>
        <source>Primary</source>
        <translation>Primaria</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="170"/>
        <source>GPT</source>
        <translation>GPT</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="259"/>
        <source>Mountpoint already in use. Please select another one.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>CreatePartitionJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="44"/>
        <source>Create new %2MB partition on %4 (%3) with file system %1.</source>
        <translation> Crear nueva partición %2MB en %4 (%3) con el sistema de archivos %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="55"/>
        <source>Create new &lt;strong&gt;%2MB&lt;/strong&gt; partition on &lt;strong&gt;%4&lt;/strong&gt; (%3) with file system &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation> Crear nueva partición &lt;strong&gt;%2MB&lt;/strong&gt; en &lt;strong&gt;%4&lt;/strong&gt; (%3) con el sistema de archivos &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="67"/>
        <source>Creating new %1 partition on %2.</source>
        <translation> Creando nueva partición %1 en %2</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="79"/>
        <source>The installer failed to create partition on disk &apos;%1&apos;.</source>
        <translation>El instalador falló en crear la partición en el disco &apos;%1&apos;.</translation>
    </message>
</context>
<context>
    <name>CreatePartitionTableDialog</name>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="20"/>
        <source>Create Partition Table</source>
        <translation>Crear Tabla de Particiones</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="39"/>
        <source>Creating a new partition table will delete all existing data on the disk.</source>
        <translation>Crear una nueva tabla de particiones borrara todos los datos existentes en el disco.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="65"/>
        <source>What kind of partition table do you want to create?</source>
        <translation>¿Qué tipo de tabla de particiones desea crear?</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="72"/>
        <source>Master Boot Record (MBR)</source>
        <translation>Master Boot Record (MBR)</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="82"/>
        <source>GUID Partition Table (GPT)</source>
        <translation>Tabla de Particiones GUID (GPT)</translation>
    </message>
</context>
<context>
    <name>CreatePartitionTableJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="45"/>
        <source>Create new %1 partition table on %2.</source>
        <translation> Crear nueva tabla de particiones %1 en %2</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="52"/>
        <source>Create new &lt;strong&gt;%1&lt;/strong&gt; partition table on &lt;strong&gt;%2&lt;/strong&gt; (%3).</source>
        <translation> Crear nueva tabla de particiones &lt;strong&gt;%1&lt;/strong&gt; en &lt;strong&gt;%2&lt;/strong&gt; (%3).</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="62"/>
        <source>Creating new %1 partition table on %2.</source>
        <translation> Creando nueva tabla de particiones %1 en %2.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="72"/>
        <source>The installer failed to create a partition table on %1.</source>
        <translation>El instalador falló al crear una tabla de partición en %1.</translation>
    </message>
</context>
<context>
    <name>CreateUserJob</name>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="50"/>
        <source>Create user %1</source>
        <translation>Crear usuario %1</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="57"/>
        <source>Create user &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation> Crear usuario &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="64"/>
        <source>Creating user %1.</source>
        <translation>Creando cuenta de susuario %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="80"/>
        <source>Sudoers dir is not writable.</source>
        <translation>El directorio &quot;Sudoers&quot; no es editable. </translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="84"/>
        <source>Cannot create sudoers file for writing.</source>
        <translation>No se puede crear el archivo sudoers para editarlo. </translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="92"/>
        <source>Cannot chmod sudoers file.</source>
        <translation>No se puede aplicar chmod al archivo sudoers.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="98"/>
        <source>Cannot open groups file for reading.</source>
        <translation>No se puede abrir el archivo groups para lectura.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="159"/>
        <source>Cannot create user %1.</source>
        <translation>No se puede crear el usuario %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="161"/>
        <source>useradd terminated with error code %1.</source>
        <translation>useradd ha finalizado con elcódigo de error %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="170"/>
        <source>Cannot add user %1 to groups: %2.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="173"/>
        <source>usermod terminated with error code %1.</source>
        <translation>usermod ha terminado con el código de error %1</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="183"/>
        <source>Cannot set home directory ownership for user %1.</source>
        <translation>No se pueden aplicar permisos de propiedad a la carpeta home para el usuario %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/CreateUserJob.cpp" line="185"/>
        <source>chown terminated with error code %1.</source>
        <translation>chown ha finalizado con elcódigo de error %1.</translation>
    </message>
</context>
<context>
    <name>DeletePartitionJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="40"/>
        <source>Delete partition %1.</source>
        <translation>Eliminar la partición %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="48"/>
        <source>Delete partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Eliminar la partición &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="56"/>
        <source>Deleting partition %1.</source>
        <translation>Eliminando partición %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="68"/>
        <source>The installer failed to delete partition %1.</source>
        <translation>El instalador no pudo borrar la partición %1.</translation>
    </message>
</context>
<context>
    <name>DeviceInfoWidget</name>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="150"/>
        <source>The type of &lt;strong&gt;partition table&lt;/strong&gt; on the selected storage device.&lt;br&gt;&lt;br&gt;The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device.&lt;br&gt;This installer will keep the current partition table unless you explicitly choose otherwise.&lt;br&gt;If unsure, on modern systems GPT is preferred.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="107"/>
        <source>This device has a &lt;strong&gt;%1&lt;/strong&gt; partition table.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="114"/>
        <source>This is a &lt;strong&gt;loop&lt;/strong&gt; device.&lt;br&gt;&lt;br&gt;It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="121"/>
        <source>This installer &lt;strong&gt;cannot detect a partition table&lt;/strong&gt; on the selected storage device.&lt;br&gt;&lt;br&gt;The device either has no partition table, or the partition table is corrupted or of an unknown type.&lt;br&gt;This installer can create a new partition table for you, either automatically, or through the manual partitioning page.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="131"/>
        <source>&lt;br&gt;&lt;br&gt;This is the recommended partition table type for modern systems which start from an &lt;strong&gt;EFI&lt;/strong&gt; boot environment.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="137"/>
        <source>&lt;br&gt;&lt;br&gt;This partition table type is only advisable on older systems which start from a &lt;strong&gt;BIOS&lt;/strong&gt; boot environment. GPT is recommended in most other cases.&lt;br&gt;&lt;br&gt;&lt;strong&gt;Warning:&lt;/strong&gt; the MBR partition table is an obsolete MS-DOS era standard.&lt;br&gt;Only 4 &lt;em&gt;primary&lt;/em&gt; partitions may be created, and of those 4, one can be an &lt;em&gt;extended&lt;/em&gt; partition, which may in turn contain many &lt;em&gt;logical&lt;/em&gt; partitions.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>DeviceModel</name>
    <message>
        <location filename="../src/modules/partition/core/DeviceModel.cpp" line="80"/>
        <source>%1 - %2 (%3)</source>
        <translation>%1 - %2 (%3)</translation>
    </message>
</context>
<context>
    <name>DracutLuksCfgJob</name>
    <message>
        <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="131"/>
        <source>Write LUKS configuration for Dracut to %1</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="133"/>
        <source>Skip writing LUKS configuration for Dracut: &quot;/&quot; partition is not encrypted</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="149"/>
        <source>Failed to open %1</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>DummyCppJob</name>
    <message>
        <location filename="../src/modules/dummycpp/DummyCppJob.cpp" line="46"/>
        <source>Dummy C++ Job</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>EditExistingPartitionDialog</name>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="20"/>
        <source>Edit Existing Partition</source>
        <translation>Editar Partición Existente</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="50"/>
        <source>Content:</source>
        <translation>Contenido:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="60"/>
        <source>&amp;Keep</source>
        <translation>&amp;Conservar</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="70"/>
        <source>Format</source>
        <translation>Formato</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="89"/>
        <source>Warning: Formatting the partition will erase all existing data.</source>
        <translation>Advertencia: Formatear la partición borrara todos los datos existentes.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="99"/>
        <source>&amp;Mount Point:</source>
        <translation>Punto de &amp;Montaje</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="119"/>
        <source>Si&amp;ze:</source>
        <translation>Tam&amp;año:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="129"/>
        <source> MiB</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="136"/>
        <source>Fi&amp;le System:</source>
        <translation>Sis&amp;tema de Archivos:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="149"/>
        <source>Flags:</source>
        <translation>Banderas:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.cpp" line="268"/>
        <source>Mountpoint already in use. Please select another one.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>EncryptWidget</name>
    <message>
        <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="14"/>
        <source>Form</source>
        <translation>Formulario</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="32"/>
        <source>En&amp;crypt system</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="42"/>
        <source>Passphrase</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="52"/>
        <source>Confirm passphrase</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/EncryptWidget.cpp" line="151"/>
        <source>Please enter the same passphrase in both boxes.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>FillGlobalStorageJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="123"/>
        <source>Set partition information</source>
        <translation>Fijar información de la partición. </translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="147"/>
        <source>Install %1 on &lt;strong&gt;new&lt;/strong&gt; %2 system partition.</source>
        <translation>Instalar %1 en &lt;strong&gt;nueva&lt;/strong&gt; partición de sistema %2.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="151"/>
        <source>Set up &lt;strong&gt;new&lt;/strong&gt; %2 partition with mount point &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Configurar &lt;strong&gt;nueva&lt;/strong&gt; %2 partición con punto de montaje &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="159"/>
        <source>Install %2 on %3 system partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Instalar %2 en %3 partición del sistema &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="164"/>
        <source>Set up %3 partition &lt;strong&gt;%1&lt;/strong&gt; with mount point &lt;strong&gt;%2&lt;/strong&gt;.</source>
        <translation>Configurar %3 partición &lt;strong&gt;%1&lt;/strong&gt; con punto de montaje &lt;strong&gt;%2&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="176"/>
        <source>Install boot loader on &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Instalar el cargador de arranque en &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="186"/>
        <source>Setting up mount points.</source>
        <translation>Configurando puntos de montaje.</translation>
    </message>
</context>
<context>
    <name>FinishedPage</name>
    <message>
        <location filename="../src/modules/finished/FinishedPage.ui" line="14"/>
        <source>Form</source>
        <translation>Forma</translation>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedPage.ui" line="95"/>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;When this box is checked, your system will restart immediately when you click on &lt;span style=&quot; font-style:italic;&quot;&gt;Done&lt;/span&gt; or close the installer.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedPage.ui" line="98"/>
        <source>&amp;Restart now</source>
        <translation>&amp;Reiniciar ahora</translation>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedPage.cpp" line="51"/>
        <source>&lt;h1&gt;All done.&lt;/h1&gt;&lt;br/&gt;%1 has been installed on your computer.&lt;br/&gt;You may now restart into your new system, or continue using the %2 Live environment.</source>
        <translation>&lt;h1&gt;Listo.&lt;/h1&gt;&lt;br/&gt;%1 ha sido instalado en su computadora.&lt;br/&gt;Ahora puede reiniciar su nuevo sistema, o continuar usando el entorno Live %2.</translation>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedPage.cpp" line="109"/>
        <source>&lt;h1&gt;Installation Failed&lt;/h1&gt;&lt;br/&gt;%1 has not been installed on your computer.&lt;br/&gt;The error message was: %2.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>FinishedViewStep</name>
    <message>
        <location filename="../src/modules/finished/FinishedViewStep.cpp" line="59"/>
        <source>Finish</source>
        <translation>Terminado</translation>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedViewStep.cpp" line="124"/>
        <source>Installation Complete</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/finished/FinishedViewStep.cpp" line="125"/>
        <source>The installation of %1 is complete.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>FormatPartitionJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="41"/>
        <source>Format partition %1 (file system: %2, size: %3 MB) on %4.</source>
        <translation>Formatear la partición %1 (sistema de archivos: %2, tamaño: %3 MB) en %4</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="52"/>
        <source>Format &lt;strong&gt;%3MB&lt;/strong&gt; partition &lt;strong&gt;%1&lt;/strong&gt; with file system &lt;strong&gt;%2&lt;/strong&gt;.</source>
        <translation>Formatear &lt;strong&gt;%3MB&lt;/strong&gt; partición &lt;strong&gt;%1&lt;/strong&gt; con sistema de archivos &lt;strong&gt;%2&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="63"/>
        <source>Formatting partition %1 with file system %2.</source>
        <translation>Formateando partición %1 con sistema de archivos %2.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="77"/>
        <source>The installer failed to format partition %1 on disk &apos;%2&apos;.</source>
        <translation>El instalador no ha podido formatear la partición %1 en el disco &apos;%2&apos;</translation>
    </message>
</context>
<context>
    <name>InteractiveTerminalPage</name>
    <message>
        <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="53"/>
        <source>Konsole not installed</source>
        <translation>Konsole no instalado</translation>
    </message>
    <message>
        <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="54"/>
        <source>Please install KDE Konsole and try again!</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="116"/>
        <source>Executing script: &amp;nbsp;&lt;code&gt;%1&lt;/code&gt;</source>
        <translation>Ejecutando script: &amp;nbsp;&lt;code&gt;%1&lt;/code&gt;</translation>
    </message>
</context>
<context>
    <name>InteractiveTerminalViewStep</name>
    <message>
        <location filename="../src/modules/interactiveterminal/InteractiveTerminalViewStep.cpp" line="45"/>
        <source>Script</source>
        <translation>Script</translation>
    </message>
</context>
<context>
    <name>KeyboardPage</name>
    <message>
        <location filename="../src/modules/keyboard/KeyboardPage.cpp" line="220"/>
        <source>Set keyboard model to %1.&lt;br/&gt;</source>
        <translation>Ajustar el modelo de teclado a %1.&lt;br/&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/KeyboardPage.cpp" line="222"/>
        <source>Set keyboard layout to %1/%2.</source>
        <translation>Ajustar teclado a %1/%2.</translation>
    </message>
</context>
<context>
    <name>KeyboardViewStep</name>
    <message>
        <location filename="../src/modules/keyboard/KeyboardViewStep.cpp" line="50"/>
        <source>Keyboard</source>
        <translation>Teclado</translation>
    </message>
</context>
<context>
    <name>LCLocaleDialog</name>
    <message>
        <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="34"/>
        <source>System locale setting</source>
        <translation>Configuración de localización del sistema</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="41"/>
        <source>The system locale setting affects the language and character set for some command line user interface elements.&lt;br/&gt;The current setting is &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>La configuración regional del sistema afecta al idioma y a al conjunto de caracteres para algunos elementos de interfaz de la linea de comandos.&lt;br/&gt;La configuración actual es &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="66"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Cancelar</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="67"/>
        <source>&amp;OK</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>LicensePage</name>
    <message>
        <location filename="../src/modules/license/LicensePage.ui" line="14"/>
        <source>Form</source>
        <translation>Formulario</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="88"/>
        <source>I accept the terms and conditions above.</source>
        <translation>Acepto los terminos y condiciones anteriores.</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="115"/>
        <source>&lt;h1&gt;License Agreement&lt;/h1&gt;This setup procedure will install proprietary software that is subject to licensing terms.</source>
        <translation>&lt;h1&gt;Acuerdo de Licencia&lt;/h1&gt;Este procediemiento de configuración instalará software que está sujeto a terminos de la licencia.</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="118"/>
        <source>Please review the End User License Agreements (EULAs) above.&lt;br/&gt;If you do not agree with the terms, the setup procedure cannot continue.</source>
        <translation>Por favor, revise el acuerdo de licencia de usuario final (EULAs) anterior. &lt;br/&gt;Si usted no está de acuerdo con los términos, el procedimiento de configuración no podrá continuar.</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="124"/>
        <source>&lt;h1&gt;License Agreement&lt;/h1&gt;This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience.</source>
        <translation>&lt;h1&gt;Acuerdo de licencia&lt;/ h1&gt; Este procedimiento de configuración se puede instalar software privativo que está sujeto a condiciones de licencia con el fin de proporcionar características adicionales y mejorar la experiencia del usuario.</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="129"/>
        <source>Please review the End User License Agreements (EULAs) above.&lt;br/&gt;If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead.</source>
        <translation>Por favor revise los acuerdos de licencia de usuario final (EULAs) anterior.&lt;br/&gt;Si usted no está de acuerdo con los términos, el software privativo no se instalará, y las alternativas de código abierto se utilizarán en su lugar.</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="159"/>
        <source>&lt;strong&gt;%1 driver&lt;/strong&gt;&lt;br/&gt;by %2</source>
        <extracomment>%1 is an untranslatable product name, example: Creative Audigy driver</extracomment>
        <translation>&lt;strong&gt;controlador %1&lt;/strong&gt;&lt;br/&gt;por %2</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="166"/>
        <source>&lt;strong&gt;%1 graphics driver&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
        <extracomment>%1 is usually a vendor name, example: Nvidia graphics driver</extracomment>
        <translation> &lt;strong&gt;controladores gráficos de %1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;por %2&lt;/font&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="172"/>
        <source>&lt;strong&gt;%1 browser plugin&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
        <translation> &lt;strong&gt;plugin del navegador %1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;por %2&lt;/font&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="178"/>
        <source>&lt;strong&gt;%1 codec&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
        <translation>&lt;strong&gt;codec %1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;por %2&lt;/font&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="184"/>
        <source>&lt;strong&gt;%1 package&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
        <translation>&lt;strong&gt;paquete %1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;por %2&lt;/font&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="190"/>
        <source>&lt;strong&gt;%1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;by %2&lt;/font&gt;</source>
        <translation>&lt;strong&gt;%1&lt;/strong&gt;&lt;br/&gt;&lt;font color=&quot;Grey&quot;&gt;por %2&lt;/font&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/license/LicensePage.cpp" line="202"/>
        <source>&lt;a href=&quot;%1&quot;&gt;view license agreement&lt;/a&gt;</source>
        <translation>&lt;a href=&quot;%1&quot;&gt;ver acuerdo de licencia&lt;/a&gt;</translation>
    </message>
</context>
<context>
    <name>LicenseViewStep</name>
    <message>
        <location filename="../src/modules/license/LicenseViewStep.cpp" line="51"/>
        <source>License</source>
        <translation>Licencia</translation>
    </message>
</context>
<context>
    <name>LocalePage</name>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="387"/>
        <source>The system language will be set to %1.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="389"/>
        <source>The numbers and dates locale will be set to %1.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="215"/>
        <source>Region:</source>
        <translation>Región:</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="216"/>
        <source>Zone:</source>
        <translation>Zona:</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="220"/>
        <location filename="../src/modules/locale/LocalePage.cpp" line="221"/>
        <source>&amp;Change...</source>
        <translation>&amp;Cambiar...</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="398"/>
        <source>Set timezone to %1/%2.&lt;br/&gt;</source>
        <translation>Definir la zona horaria como %1/%2.&lt;br/&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocalePage.cpp" line="480"/>
        <source>%1 (%2)</source>
        <extracomment>Language (Country)</extracomment>
        <translation>%1 (%2)</translation>
    </message>
</context>
<context>
    <name>LocaleViewStep</name>
    <message>
        <location filename="../src/modules/locale/LocaleViewStep.cpp" line="60"/>
        <source>Loading location data...</source>
        <translation>Cargando datos de ubicación...</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/LocaleViewStep.cpp" line="175"/>
        <source>Location</source>
        <translation>Ubicación</translation>
    </message>
</context>
<context>
    <name>NetInstallPage</name>
    <message>
        <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="72"/>
        <source>Name</source>
        <translation>Nombre</translation>
    </message>
    <message>
        <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="73"/>
        <source>Description</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="94"/>
        <source>Network Installation. (Disabled: Unable to fetch package lists, check your network connection)</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="104"/>
        <source>Network Installation. (Disabled: Received invalid groups data)</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>NetInstallViewStep</name>
    <message>
        <location filename="../src/modules/netinstall/NetInstallViewStep.cpp" line="52"/>
        <source>Package selection</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>PWQ</name>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="63"/>
        <source>Password is too short</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="85"/>
        <source>Password is too long</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="151"/>
        <source>Password is too weak</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="158"/>
        <source>Memory allocation error when setting &apos;%1&apos;</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="162"/>
        <source>Memory allocation error</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="164"/>
        <source>The password is the same as the old one</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="166"/>
        <source>The password is a palindrome</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="168"/>
        <source>The password differs with case changes only</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="170"/>
        <source>The password is too similar to the old one</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="172"/>
        <source>The password contains the user name in some form</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="174"/>
        <source>The password contains words from the real name of the user in some form</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="176"/>
        <source>The password contains forbidden words in some form</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="179"/>
        <source>The password contains less than %1 digits</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="180"/>
        <source>The password contains too few digits</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="183"/>
        <source>The password contains less than %1 uppercase letters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="184"/>
        <source>The password contains too few uppercase letters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="187"/>
        <source>The password contains less than %1 lowercase letters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="188"/>
        <source>The password contains too few lowercase letters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="191"/>
        <source>The password contains less than %1 non-alphanumeric characters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="192"/>
        <source>The password contains too few non-alphanumeric characters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="195"/>
        <source>The password is shorter than %1 characters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="196"/>
        <source>The password is too short</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="198"/>
        <source>The password is just rotated old one</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="201"/>
        <source>The password contains less than %1 character classes</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="202"/>
        <source>The password does not contain enough character classes</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="205"/>
        <source>The password contains more than %1 same characters consecutively</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="206"/>
        <source>The password contains too many same characters consecutively</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="209"/>
        <source>The password contains more than %1 characters of the same class consecutively</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="210"/>
        <source>The password contains too many characters of the same class consecutively</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="213"/>
        <source>The password contains monotonic sequence longer than %1 characters</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="214"/>
        <source>The password contains too long of a monotonic character sequence</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="216"/>
        <source>No password supplied</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="218"/>
        <source>Cannot obtain random numbers from the RNG device</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="220"/>
        <source>Password generation failed - required entropy too low for settings</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="225"/>
        <source>The password fails the dictionary check - %1</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="227"/>
        <source>The password fails the dictionary check</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="231"/>
        <source>Unknown setting - %1</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="235"/>
        <source>Unknown setting</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="239"/>
        <source>Bad integer value of setting - %1</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="243"/>
        <source>Bad integer value</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="247"/>
        <source>Setting %1 is not of integer type</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="251"/>
        <source>Setting is not of integer type</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="255"/>
        <source>Setting %1 is not of string type</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="259"/>
        <source>Setting is not of string type</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="261"/>
        <source>Opening the configuration file failed</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="263"/>
        <source>The configuration file is malformed</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="265"/>
        <source>Fatal failure</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/CheckPWQuality.cpp" line="267"/>
        <source>Unknown error</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>Page_Keyboard</name>
    <message>
        <location filename="../src/modules/keyboard/KeyboardPage.ui" line="14"/>
        <source>Form</source>
        <translation>Formulario</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/KeyboardPage.ui" line="70"/>
        <source>Keyboard Model:</source>
        <translation>Modelo de teclado:</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/KeyboardPage.ui" line="131"/>
        <source>Type here to test your keyboard</source>
        <translation>Teclee aquí para probar su teclado</translation>
    </message>
</context>
<context>
    <name>Page_UserSetup</name>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="14"/>
        <source>Form</source>
        <translation>Formulario</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="36"/>
        <source>What is your name?</source>
        <translation>¿Cuál es su nombre?</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="117"/>
        <source>What name do you want to use to log in?</source>
        <translation>¿Qué nombre desea usar para acceder al sistema?</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="306"/>
        <location filename="../src/modules/users/page_usersetup.ui" line="437"/>
        <location filename="../src/modules/users/page_usersetup.ui" line="582"/>
        <source>font-weight: normal</source>
        <translation>Tamaño de fuente: normal</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="200"/>
        <source>&lt;small&gt;If more than one person will use this computer, you can set up multiple accounts after installation.&lt;/small&gt;</source>
        <translation>&lt;small&gt;Si este equipo es usado por varios usuarios, podrá configurar varias cuentas tras finalizar la instalación.&lt;/small&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="335"/>
        <source>Choose a password to keep your account safe.</source>
        <translation>Seleccione una contraseña para mantener segura su cuenta.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="440"/>
        <source>&lt;small&gt;Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals.&lt;/small&gt;</source>
        <translation>&lt;small&gt;Escribe dos veces la misma contraseña para que se pueda comprobar si tiene errores. Una buena contraseña está formada por letras, números y signos de puntuación, tiene por lo menos ocho caracteres y hay que cambiarla cada cierto tiempo.&lt;/small&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="226"/>
        <source>What is the name of this computer?</source>
        <translation>¿Cuál es el nombre de esta computadora?</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="309"/>
        <source>&lt;small&gt;This name will be used if you make the computer visible to others on a network.&lt;/small&gt;</source>
        <translation>&lt;small&gt;Este nombre sera usado si hace esta computadora visible para otros en una red.&lt;/small&gt;</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="450"/>
        <source>Log in automatically without asking for the password.</source>
        <translation>Iniciar sesión automáticamente sin preguntar por la contraseña.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="457"/>
        <source>Use the same password for the administrator account.</source>
        <translation>Usar la misma contraseña para la cuenta de administrador.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="480"/>
        <source>Choose a password for the administrator account.</source>
        <translation>Elegir una contraseña para la cuenta de administrador.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/page_usersetup.ui" line="585"/>
        <source>&lt;small&gt;Enter the same password twice, so that it can be checked for typing errors.&lt;/small&gt;</source>
        <translation>&lt;small&gt;Escribe dos veces la contraseña para comprobar si tiene errores&lt;/small&gt;</translation>
    </message>
</context>
<context>
    <name>PartitionLabelsView</name>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="193"/>
        <source>Root</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="196"/>
        <source>Home</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="198"/>
        <source>Boot</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="201"/>
        <source>EFI system</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="203"/>
        <source>Swap</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="205"/>
        <source>New partition for %1</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="207"/>
        <source>New partition</source>
        <translation>Partición nueva</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="224"/>
        <source>%1  %2</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>PartitionModel</name>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="137"/>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="169"/>
        <source>Free Space</source>
        <translation>Espacio libre</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="141"/>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="173"/>
        <source>New partition</source>
        <translation>Partición nueva</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="257"/>
        <source>Name</source>
        <translation>Nombre</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="259"/>
        <source>File System</source>
        <translation>Sistema de archivos</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="261"/>
        <source>Mount Point</source>
        <translation>Punto de montaje</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/PartitionModel.cpp" line="263"/>
        <source>Size</source>
        <translation>Tamaño</translation>
    </message>
</context>
<context>
    <name>PartitionPage</name>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="14"/>
        <source>Form</source>
        <translation>Formulario</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="22"/>
        <source>Storage de&amp;vice:</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="51"/>
        <source>&amp;Revert All Changes</source>
        <translation>&amp;Deshacer todos los cambios</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="87"/>
        <source>New Partition &amp;Table</source>
        <translation>Nueva &amp;tabla de particiones</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="107"/>
        <source>&amp;Create</source>
        <translation>&amp;Crear</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="114"/>
        <source>&amp;Edit</source>
        <translation>&amp;Editar</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="121"/>
        <source>&amp;Delete</source>
        <translation>&amp;Borrar</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.ui" line="148"/>
        <source>Install boot &amp;loader on:</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.cpp" line="169"/>
        <source>Are you sure you want to create a new partition table on %1?</source>
        <translation>¿Está seguro de querer crear una nueva tabla de particiones en %1?</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.cpp" line="193"/>
        <source>Can not create new partition</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionPage.cpp" line="194"/>
        <source>The partition table on %1 already has %2 primary partitions, and no more can be added. Please remove one primary partition and add an extended partition, instead.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>PartitionViewStep</name>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="70"/>
        <source>Gathering system information...</source>
        <translation>Obteniendo información del sistema...</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="121"/>
        <source>Partitions</source>
        <translation>Particiones</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="158"/>
        <source>Install %1 &lt;strong&gt;alongside&lt;/strong&gt; another operating system.</source>
        <translation> Instalar %1 &lt;strong&gt;junto con&lt;/strong&gt; otro sistema operativo.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="162"/>
        <source>&lt;strong&gt;Erase&lt;/strong&gt; disk and install %1.</source>
        <translation> &lt;strong&gt;Borrar&lt;/strong&gt; el disco e instalar %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="166"/>
        <source>&lt;strong&gt;Replace&lt;/strong&gt; a partition with %1.</source>
        <translation> &lt;strong&gt;Reemplazar&lt;/strong&gt; una parición con %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="171"/>
        <source>&lt;strong&gt;Manual&lt;/strong&gt; partitioning.</source>
        <translation> Particionamiento &lt;strong&gt;manual&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="184"/>
        <source>Install %1 &lt;strong&gt;alongside&lt;/strong&gt; another operating system on disk &lt;strong&gt;%2&lt;/strong&gt; (%3).</source>
        <translation> Instalar %1 &lt;strong&gt;junto con&lt;/strong&gt; otro sistema operativo en el disco &lt;strong&gt;%2&lt;/strong&gt;(%3).</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="190"/>
        <source>&lt;strong&gt;Erase&lt;/strong&gt; disk &lt;strong&gt;%2&lt;/strong&gt; (%3) and install %1.</source>
        <translation> &lt;strong&gt;Borrar&lt;/strong&gt; el disco &lt;strong&gt;%2&lt;strong&gt; (%3) e instalar %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="196"/>
        <source>&lt;strong&gt;Replace&lt;/strong&gt; a partition on disk &lt;strong&gt;%2&lt;/strong&gt; (%3) with %1.</source>
        <translation> &lt;strong&gt;Reemplazar&lt;/strong&gt; una parición en el disco &lt;strong&gt;%2&lt;/strong&gt; (%3) con %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="203"/>
        <source>&lt;strong&gt;Manual&lt;/strong&gt; partitioning on disk &lt;strong&gt;%1&lt;/strong&gt; (%2).</source>
        <translation> Particionar &lt;strong&gt;manualmente&lt;/strong&gt; el disco &lt;strong&gt;%1&lt;/strong&gt; (%2).</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="211"/>
        <source>Disk &lt;strong&gt;%1&lt;/strong&gt; (%2)</source>
        <translation>Disco &lt;strong&gt;%1&lt;/strong&gt; (%2)</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="239"/>
        <source>Current:</source>
        <translation>Actual:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="256"/>
        <source>After:</source>
        <translation>Después:</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="399"/>
        <source>No EFI system partition configured</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="400"/>
        <source>An EFI system partition is necessary to start %1.&lt;br/&gt;&lt;br/&gt;To configure an EFI system partition, go back and select or create a FAT32 filesystem with the &lt;strong&gt;esp&lt;/strong&gt; flag enabled and mount point &lt;strong&gt;%2&lt;/strong&gt;.&lt;br/&gt;&lt;br/&gt;You can continue without setting up an EFI system partition but your system may fail to start.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="413"/>
        <source>EFI system partition flag not set</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="414"/>
        <source>An EFI system partition is necessary to start %1.&lt;br/&gt;&lt;br/&gt;A partition was configured with mount point &lt;strong&gt;%2&lt;/strong&gt; but its &lt;strong&gt;esp&lt;/strong&gt; flag is not set.&lt;br/&gt;To set the flag, go back and edit the partition.&lt;br/&gt;&lt;br/&gt;You can continue without setting the flag but your system may fail to start.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="449"/>
        <source>Boot partition not encrypted</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="450"/>
        <source>A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted.&lt;br/&gt;&lt;br/&gt;There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition.&lt;br/&gt;You may continue if you wish, but filesystem unlocking will happen later during system startup.&lt;br/&gt;To encrypt the boot partition, go back and recreate it, selecting &lt;strong&gt;Encrypt&lt;/strong&gt; in the partition creation window.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>PlasmaLnfJob</name>
    <message>
        <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="41"/>
        <source>Plasma Look-and-Feel Job</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="73"/>
        <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="74"/>
        <source>Could not select KDE Plasma Look-and-Feel package</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>PlasmaLnfPage</name>
    <message>
        <location filename="../src/modules/plasmalnf/page_plasmalnf.ui" line="14"/>
        <source>Form</source>
        <translation>Formulario</translation>
    </message>
    <message>
        <location filename="../src/modules/plasmalnf/page_plasmalnf.ui" line="20"/>
        <source>Placeholder</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/plasmalnf/PlasmaLnfPage.cpp" line="67"/>
        <source>Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is installed. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>PlasmaLnfViewStep</name>
    <message>
        <location filename="../src/modules/plasmalnf/PlasmaLnfViewStep.cpp" line="68"/>
        <source>Look-and-Feel</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>ProcessResult</name>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="271"/>
        <source>
There was no output from the command.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="272"/>
        <source>
Output:
</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="275"/>
        <source>External command crashed.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="276"/>
        <source>Command &lt;i&gt;%1&lt;/i&gt; crashed.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="281"/>
        <source>External command failed to start.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="282"/>
        <source>Command &lt;i&gt;%1&lt;/i&gt; failed to start.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="286"/>
        <source>Internal error when starting command.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="287"/>
        <source>Bad parameters for process job call.</source>
        <translation>Parámetros erróneos en la llamada al proceso.</translation>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="290"/>
        <source>External command failed to finish.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="291"/>
        <source>Command &lt;i&gt;%1&lt;/i&gt; failed to finish in %2 seconds.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="297"/>
        <source>External command finished with errors.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="298"/>
        <source>Command &lt;i&gt;%1&lt;/i&gt; finished with exit code %2.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="82"/>
        <source>Default Keyboard Model</source>
        <translation>Modelo de teclado por defecto</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="127"/>
        <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="163"/>
        <source>Default</source>
        <translation>Por defecto</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="206"/>
        <source>unknown</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="208"/>
        <source>extended</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="210"/>
        <source>unformatted</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="212"/>
        <source>swap</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="49"/>
        <source>Unpartitioned space or unknown partition table</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>ReplaceWidget</name>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.ui" line="14"/>
        <source>Form</source>
        <translation>Formulario</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="134"/>
        <source>Select where to install %1.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Warning: &lt;/font&gt;this will delete all files on the selected partition.</source>
        <translation>Selecciona donde instalar %1.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Aviso: &lt;/font&gt;Se borrarán todos los archivos de la partición seleccionada.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="160"/>
        <source>The selected item does not appear to be a valid partition.</source>
        <translation>El elemento seleccionado no parece ser una partición válida.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="168"/>
        <source>%1 cannot be installed on empty space. Please select an existing partition.</source>
        <translation>%1 no se puede instalar en un espacio vacío. Selecciona una partición existente.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="178"/>
        <source>%1 cannot be installed on an extended partition. Please select an existing primary or logical partition.</source>
        <translation>%1 no se puede instalar en una partición extendida. Selecciona una partición primaria o lógica.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="188"/>
        <source>%1 cannot be installed on this partition.</source>
        <translation>No se puede instalar %1 en esta partición.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="194"/>
        <source>Data partition (%1)</source>
        <translation>Partición de datos (%1)</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="211"/>
        <source>Unknown system partition (%1)</source>
        <translation>Partición de sistema desconocida (%1)</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="216"/>
        <source>%1 system partition (%2)</source>
        <translation>%1 partición de sistema (%2)</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="227"/>
        <source>&lt;strong&gt;%4&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;The partition %1 is too small for %2. Please select a partition with capacity at least %3 GiB.</source>
        <translation> &lt;strong&gt;%4&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;La partición %1 es muy pequeña para %2. Selecciona otra partición que tenga al menos %3 GiB.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="250"/>
        <source>&lt;strong&gt;%2&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source>
        <translation>&lt;strong&gt;%2&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;No se puede encontrar una partición EFI en este sistema. Por favor vuelva atrás y use el particionamiento manual para configurar %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="261"/>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="278"/>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="302"/>
        <source>&lt;strong&gt;%3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;%1 will be installed on %2.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Warning: &lt;/font&gt;all data on partition %2 will be lost.</source>
        <translation>&lt;strong&gt;%3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;%1 sera instalado en %2.&lt;br/&gt;&lt;font color=&quot;red&quot;&gt;Advertencia: &lt;/font&gt;toda la información en la partición %2 se perdera.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="270"/>
        <source>The EFI system partition at %1 will be used for starting %2.</source>
        <translation>La partición EFI en %1 será usada para iniciar %2.
</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="286"/>
        <source>EFI system partition:</source>
        <translation>Partición de sistema EFI:</translation>
    </message>
</context>
<context>
    <name>RequirementsChecker</name>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="68"/>
        <source>Gathering system information...</source>
        <translation>Obteniendo información del sistema...</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="118"/>
        <source>has at least %1 GB available drive space</source>
        <translation>tiene al menos %1 GB de espacio en disco disponible</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="120"/>
        <source>There is not enough drive space. At least %1 GB is required.</source>
        <translation>No hay suficiente espacio disponible en disco. Se requiere al menos %1 GB.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="128"/>
        <source>has at least %1 GB working memory</source>
        <translation>tiene al menos %1 GB de memoria para trabajar</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="130"/>
        <source>The system does not have enough working memory. At least %1 GB is required.</source>
        <translation>No hay suficiente espacio disponible en disco. Se requiere al menos %1 GB.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="138"/>
        <source>is plugged in to a power source</source>
        <translation>está conectado a una fuente de energía</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="139"/>
        <source>The system is not plugged in to a power source.</source>
        <translation>El sistema no está conectado a una fuente de energía.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="146"/>
        <source>is connected to the Internet</source>
        <translation>está conectado a Internet</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="147"/>
        <source>The system is not connected to the Internet.</source>
        <translation>El sistema no está conectado a Internet.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="155"/>
        <source>The installer is not running with administrator rights.</source>
        <translation>El instalador no se está ejecutando con privilegios de administrador.</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="163"/>
        <source>The screen is too small to display the installer.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>ResizePartitionJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="48"/>
        <source>Resize partition %1.</source>
        <translation>Redimensionar partición %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="55"/>
        <source>Resize &lt;strong&gt;%2MB&lt;/strong&gt; partition &lt;strong&gt;%1&lt;/strong&gt; to &lt;strong&gt;%3MB&lt;/strong&gt;.</source>
        <translation> Redimensionar la partición &lt;strong&gt;%1&lt;/strong&gt; de &lt;strong&gt;%2MB&lt;/strong&gt; a &lt;strong&gt;%3MB&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="66"/>
        <source>Resizing %2MB partition %1 to %3MB.</source>
        <translation>Redimensionando partición %1 de %2MB a %3MB.</translation>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="85"/>
        <source>The installer failed to resize partition %1 on disk &apos;%2&apos;.</source>
        <translation>El instalador ha fallado al reducir la partición %1 en el disco &apos;%2&apos;.</translation>
    </message>
</context>
<context>
    <name>ScanningDialog</name>
    <message>
        <location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="84"/>
        <source>Scanning storage devices...</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="85"/>
        <source>Partitioning</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>SetHostNameJob</name>
    <message>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="37"/>
        <source>Set hostname %1</source>
        <translation>Hostname: %1</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="44"/>
        <source>Set hostname &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation>Establecer nombre del equipo &lt;strong&gt;%1&lt;/strong&gt;.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="51"/>
        <source>Setting hostname %1.</source>
        <translation>Configurando nombre de host %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="61"/>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="68"/>
        <source>Internal Error</source>
        <translation>Error interno</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="75"/>
        <location filename="../src/modules/users/SetHostNameJob.cpp" line="86"/>
        <source>Cannot write hostname to target system</source>
        <translation>No es posible escribir el hostname en el sistema de destino</translation>
    </message>
</context>
<context>
    <name>SetKeyboardLayoutJob</name>
    <message>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="59"/>
        <source>Set keyboard model to %1, layout to %2-%3</source>
        <translation>Establecer el modelo de teclado %1, a una disposición %2-%3</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="318"/>
        <source>Failed to write keyboard configuration for the virtual console.</source>
        <translation>No se ha podido guardar la configuración de teclado para la consola virtual.</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="319"/>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="323"/>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="329"/>
        <source>Failed to write to %1</source>
        <translation>No se ha podido escribir en %1</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="322"/>
        <source>Failed to write keyboard configuration for X11.</source>
        <translation>No se ha podido guardar la configuración del teclado de X11.</translation>
    </message>
    <message>
        <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="328"/>
        <source>Failed to write keyboard configuration to existing /etc/default directory.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>SetPartFlagsJob</name>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="49"/>
        <source>Set flags on partition %1.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="52"/>
        <source>Set flags on %1MB %2 partition.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="56"/>
        <source>Set flags on new partition.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="67"/>
        <source>Clear flags on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="71"/>
        <source>Clear flags on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="75"/>
        <source>Clear flags on new partition.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="79"/>
        <source>Flag partition &lt;strong&gt;%1&lt;/strong&gt; as &lt;strong&gt;%2&lt;/strong&gt;.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="85"/>
        <source>Flag %1MB &lt;strong&gt;%2&lt;/strong&gt; partition as &lt;strong&gt;%3&lt;/strong&gt;.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="91"/>
        <source>Flag new partition as &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="103"/>
        <source>Clearing flags on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="107"/>
        <source>Clearing flags on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="111"/>
        <source>Clearing flags on new partition.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="115"/>
        <source>Setting flags &lt;strong&gt;%2&lt;/strong&gt; on partition &lt;strong&gt;%1&lt;/strong&gt;.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="121"/>
        <source>Setting flags &lt;strong&gt;%3&lt;/strong&gt; on %1MB &lt;strong&gt;%2&lt;/strong&gt; partition.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="127"/>
        <source>Setting flags &lt;strong&gt;%1&lt;/strong&gt; on new partition.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="140"/>
        <source>The installer failed to set flags on partition %1.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>SetPasswordJob</name>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="48"/>
        <source>Set password for user %1</source>
        <translation>Definir contraseña para el usuario %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="55"/>
        <source>Setting password for user %1.</source>
        <translation>Configurando contraseña para el usuario %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="112"/>
        <source>Bad destination system path.</source>
        <translation>Destino erróneo del sistema.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="113"/>
        <source>rootMountPoint is %1</source>
        <translation>El punto de montaje de root es %1</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="123"/>
        <source>Cannot disable root account.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="124"/>
        <source>passwd terminated with error code %1.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="139"/>
        <source>Cannot set password for user %1.</source>
        <translation>No se puede definir contraseña para el usuario %1.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/SetPasswordJob.cpp" line="141"/>
        <source>usermod terminated with error code %1.</source>
        <translation>usermod ha terminado con el código de error %1</translation>
    </message>
</context>
<context>
    <name>SetTimezoneJob</name>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="43"/>
        <source>Set timezone to %1/%2</source>
        <translation>Configurar zona horaria a %1/%2</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="71"/>
        <source>Cannot access selected timezone path.</source>
        <translation>No se puede acceder a la ruta de la zona horaria.</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="72"/>
        <source>Bad path: %1</source>
        <translation>Ruta errónea: %1</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="86"/>
        <source>Cannot set timezone.</source>
        <translation>No se puede definir la zona horaria</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="87"/>
        <source>Link creation failed, target: %1; link name: %2</source>
        <translation>Fallo al crear el enlace, destino: %1; nombre del enlace: %2</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="96"/>
        <source>Cannot set timezone,</source>
        <translation>No se puede establer la zona horaria.</translation>
    </message>
    <message>
        <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="97"/>
        <source>Cannot open /etc/timezone for writing</source>
        <translation>No se puede abrir /etc/timezone para escritura</translation>
    </message>
</context>
<context>
    <name>ShellProcessJob</name>
    <message>
        <location filename="../src/modules/shellprocess/ShellProcessJob.cpp" line="51"/>
        <source>Shell Processes Job</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>SlideCounter</name>
    <message>
        <location filename="../src/qml/calamares/slideshow/SlideCounter.qml" line="36"/>
        <source>%L1 / %L2</source>
        <extracomment>slide counter, %1 of %2 (numeric)</extracomment>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>SummaryPage</name>
    <message>
        <location filename="../src/modules/summary/SummaryPage.cpp" line="49"/>
        <source>This is an overview of what will happen once you start the install procedure.</source>
        <translation>Esto es un resumen de lo que pasará una vez que inicie el procedimiento de instalación.</translation>
    </message>
</context>
<context>
    <name>SummaryViewStep</name>
    <message>
        <location filename="../src/modules/summary/SummaryViewStep.cpp" line="43"/>
        <source>Summary</source>
        <translation>Resumen</translation>
    </message>
</context>
<context>
    <name>TrackingInstallJob</name>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="43"/>
        <source>Installation feedback</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="53"/>
        <source>Sending installation feedback.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="88"/>
        <source>Internal error in install-tracking.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="89"/>
        <source>HTTP request timed out.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>TrackingMachineNeonJob</name>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="104"/>
        <source>Machine feedback</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="114"/>
        <source>Configuring machine feedback.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="133"/>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="136"/>
        <source>Error in machine feedback configuration.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="134"/>
        <source>Could not configure machine feedback correctly, script error %1.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingJobs.cpp" line="137"/>
        <source>Could not configure machine feedback correctly, Calamares error %1.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>TrackingPage</name>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="14"/>
        <source>Form</source>
        <translation>Formulario</translation>
    </message>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="24"/>
        <source>Placeholder</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="72"/>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;By selecting this, you will send &lt;span style=&quot; font-weight:600;&quot;&gt;no information at all&lt;/span&gt; about your installation.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="123"/>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="185"/>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="247"/>
        <source>TextLabel</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="133"/>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="195"/>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="257"/>
        <source>...</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/page_trackingstep.ui" line="271"/>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;a href=&quot;placeholder&quot;&gt;&lt;span style=&quot; text-decoration: underline; color:#2980b9;&quot;&gt;Click here for more information about user feedback&lt;/span&gt;&lt;/a&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingPage.cpp" line="44"/>
        <source>Install tracking helps %1 to see how many users they have, what hardware they install %1 to and (with the last two options below), get continuous information about preferred applications. To see what will be sent, please click the help icon next to each area.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingPage.cpp" line="45"/>
        <source>By selecting this you will send information about your installation and hardware. This information will &lt;b&gt;only be sent once&lt;/b&gt; after the installation finishes.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingPage.cpp" line="46"/>
        <source>By selecting this you will &lt;b&gt;periodically&lt;/b&gt; send information about your installation, hardware and applications, to %1.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/tracking/TrackingPage.cpp" line="47"/>
        <source>By selecting this you will &lt;b&gt;regularly&lt;/b&gt; send information about your installation, hardware, applications and usage patterns, to %1.</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>TrackingViewStep</name>
    <message>
        <location filename="../src/modules/tracking/TrackingViewStep.cpp" line="59"/>
        <source>Feedback</source>
        <translation type="unfinished"/>
    </message>
</context>
<context>
    <name>UsersPage</name>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="289"/>
        <source>Your username is too long.</source>
        <translation>Tu nombre de usuario es demasiado largo.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="295"/>
        <source>Your username contains invalid characters. Only lowercase letters and numbers are allowed.</source>
        <translation>Tu nombre de usuario contiene caracteres no válidos. Solo se pueden usar letras minúsculas y números.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="333"/>
        <source>Your hostname is too short.</source>
        <translation>El nombre de tu equipo es demasiado corto.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="339"/>
        <source>Your hostname is too long.</source>
        <translation>El nombre de tu equipo es demasiado largo.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="345"/>
        <source>Your hostname contains invalid characters. Only letters, numbers and dashes are allowed.</source>
        <translation>Tu nombre de equipo contiene caracteres no válidos Sólo se pueden usar letras, números y guiones.</translation>
    </message>
    <message>
        <location filename="../src/modules/users/UsersPage.cpp" line="373"/>
        <location filename="../src/modules/users/UsersPage.cpp" line="417"/>
        <source>Your passwords do not match!</source>
        <translation>Las contraseñas no coinciden!</translation>
    </message>
</context>
<context>
    <name>UsersViewStep</name>
    <message>
        <location filename="../src/modules/users/UsersViewStep.cpp" line="51"/>
        <source>Users</source>
        <translation>Usuarios</translation>
    </message>
</context>
<context>
    <name>WelcomePage</name>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="14"/>
        <source>Form</source>
        <translation>Formulario</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="75"/>
        <source>&amp;Language:</source>
        <translation>&amp;Idioma:</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="176"/>
        <source>&amp;Release notes</source>
        <translation>&amp;Notas de lanzamiento</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="166"/>
        <source>&amp;Known issues</source>
        <translation>&amp;Problemas Conocidos</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="156"/>
        <source>&amp;Support</source>
        <translation>&amp;Soporte</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.ui" line="146"/>
        <source>&amp;About</source>
        <translation>&amp;Acerca de</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.cpp" line="60"/>
        <source>&lt;h1&gt;Welcome to the %1 installer.&lt;/h1&gt;</source>
        <translation>&lt;h1&gt;Bienvenido al instalador de %1.&lt;/h1&gt; </translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.cpp" line="60"/>
        <source>&lt;h1&gt;Welcome to the Calamares installer for %1.&lt;/h1&gt;</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.cpp" line="73"/>
        <source>About %1 installer</source>
        <translation>Acerca del instalador %1</translation>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.cpp" line="75"/>
        <source>&lt;h1&gt;%1&lt;/h1&gt;&lt;br/&gt;&lt;strong&gt;%2&lt;br/&gt;for %3&lt;/strong&gt;&lt;br/&gt;&lt;br/&gt;Copyright 2014-2017 Teo Mrnjavac &amp;lt;teo@kde.org&amp;gt;&lt;br/&gt;Copyright 2017 Adriaan de Groot &amp;lt;groot@kde.org&amp;gt;&lt;br/&gt;Thanks to: Anke Boersma, Aurélien Gâteau, Kevin Kofler, Lisa Vitolo, Philip Müller, Pier Luigi Fiorini, Rohan Garg and the &lt;a href=&quot;https://www.transifex.com/calamares/calamares/&quot;&gt;Calamares translators team&lt;/a&gt;.&lt;br/&gt;&lt;br/&gt;&lt;a href=&quot;https://calamares.io/&quot;&gt;Calamares&lt;/a&gt; development is sponsored by &lt;br/&gt;&lt;a href=&quot;http://www.blue-systems.com/&quot;&gt;Blue Systems&lt;/a&gt; - Liberating Software.</source>
        <translation type="unfinished"/>
    </message>
    <message>
        <location filename="../src/modules/welcome/WelcomePage.cpp" line="290"/>
        <source>%1 support</source>
        <translation>%1 Soporte</translation>
    </message>
</context>
<context>
    <name>WelcomeViewStep</name>
    <message>
        <location filename="../src/modules/welcome/WelcomeViewStep.cpp" line="51"/>
        <source>Welcome</source>
        <translation>Bienvenido</translation>
    </message>
</context>
</TS>