| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178 |
- config ARCH_HAS_RESET_CONTROLLER
- bool
- menuconfig RESET_CONTROLLER
- bool "Reset Controller Support"
- default y if ARCH_HAS_RESET_CONTROLLER
- help
- Generic Reset Controller support.
- This framework is designed to abstract reset handling of devices
- via GPIOs or SoC-internal reset controller modules.
- If unsure, say no.
- if RESET_CONTROLLER
- config RESET_A10SR
- tristate "Altera Arria10 System Resource Reset"
- depends on MFD_ALTERA_A10SR
- help
- This option enables support for the external reset functions for
- peripheral PHYs on the Altera Arria10 System Resource Chip.
- config RESET_ATH79
- bool "AR71xx Reset Driver" if COMPILE_TEST
- default ATH79
- help
- This enables the ATH79 reset controller driver that supports the
- AR71xx SoC reset controller.
- config RESET_AXS10X
- bool "AXS10x Reset Driver" if COMPILE_TEST
- default ARC_PLAT_AXS10X
- help
- This enables the reset controller driver for AXS10x.
- config RESET_BERLIN
- bool "Berlin Reset Driver" if COMPILE_TEST
- default ARCH_BERLIN
- help
- This enables the reset controller driver for Marvell Berlin SoCs.
- config RESET_HSDK
- bool "Synopsys HSDK Reset Driver"
- depends on HAS_IOMEM
- depends on ARC_SOC_HSDK || COMPILE_TEST
- help
- This enables the reset controller driver for HSDK board.
- config RESET_IMX7
- bool "i.MX7 Reset Driver" if COMPILE_TEST
- depends on HAS_IOMEM
- default SOC_IMX7D
- select MFD_SYSCON
- help
- This enables the reset controller driver for i.MX7 SoCs.
- config RESET_LANTIQ
- bool "Lantiq XWAY Reset Driver" if COMPILE_TEST
- default SOC_TYPE_XWAY
- help
- This enables the reset controller driver for Lantiq / Intel XWAY SoCs.
- config RESET_LPC18XX
- bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
- default ARCH_LPC18XX
- help
- This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
- config RESET_MESON
- bool "Meson Reset Driver" if COMPILE_TEST
- default ARCH_MESON
- help
- This enables the reset driver for Amlogic Meson SoCs.
- config RESET_MESON_AUDIO_ARB
- tristate "Meson Audio Memory Arbiter Reset Driver"
- depends on ARCH_MESON || COMPILE_TEST
- help
- This enables the reset driver for Audio Memory Arbiter of
- Amlogic's A113 based SoCs
- config RESET_OXNAS
- bool
- config RESET_PISTACHIO
- bool "Pistachio Reset Driver" if COMPILE_TEST
- default MACH_PISTACHIO
- help
- This enables the reset driver for ImgTec Pistachio SoCs.
- config RESET_QCOM_AOSS
- bool "Qcom AOSS Reset Driver"
- depends on ARCH_QCOM || COMPILE_TEST
- help
- This enables the AOSS (always on subsystem) reset driver
- for Qualcomm SDM845 SoCs. Say Y if you want to control
- reset signals provided by AOSS for Modem, Venus, ADSP,
- GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
- config RESET_SIMPLE
- bool "Simple Reset Controller Driver" if COMPILE_TEST
- default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
- help
- This enables a simple reset controller driver for reset lines that
- that can be asserted and deasserted by toggling bits in a contiguous,
- exclusive register space.
- Currently this driver supports:
- - Altera SoCFPGAs
- - ASPEED BMC SoCs
- - RCC reset controller in STM32 MCUs
- - Allwinner SoCs
- - ZTE's zx2967 family
- config RESET_STM32MP157
- bool "STM32MP157 Reset Driver" if COMPILE_TEST
- default MACH_STM32MP157
- help
- This enables the RCC reset controller driver for STM32 MPUs.
- config RESET_SUNXI
- bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
- default ARCH_SUNXI
- select RESET_SIMPLE
- help
- This enables the reset driver for Allwinner SoCs.
- config RESET_TI_SCI
- tristate "TI System Control Interface (TI-SCI) reset driver"
- depends on TI_SCI_PROTOCOL
- help
- This enables the reset driver support over TI System Control Interface
- available on some new TI's SoCs. If you wish to use reset resources
- managed by the TI System Controller, say Y here. Otherwise, say N.
- config RESET_TI_SYSCON
- tristate "TI SYSCON Reset Driver"
- depends on HAS_IOMEM
- select MFD_SYSCON
- help
- This enables the reset driver support for TI devices with
- memory-mapped reset registers as part of a syscon device node. If
- you wish to use the reset framework for such memory-mapped devices,
- say Y here. Otherwise, say N.
- config RESET_UNIPHIER
- tristate "Reset controller driver for UniPhier SoCs"
- depends on ARCH_UNIPHIER || COMPILE_TEST
- depends on OF && MFD_SYSCON
- default ARCH_UNIPHIER
- help
- Support for reset controllers on UniPhier SoCs.
- Say Y if you want to control reset signals provided by System Control
- block, Media I/O block, Peripheral Block.
- config RESET_UNIPHIER_USB3
- tristate "USB3 reset driver for UniPhier SoCs"
- depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
- default ARCH_UNIPHIER
- select RESET_SIMPLE
- help
- Support for the USB3 core reset on UniPhier SoCs.
- Say Y if you want to control reset signals provided by
- USB3 glue layer.
- config RESET_ZYNQ
- bool "ZYNQ Reset Driver" if COMPILE_TEST
- default ARCH_ZYNQ
- help
- This enables the reset controller driver for Xilinx Zynq SoCs.
- source "drivers/reset/sti/Kconfig"
- source "drivers/reset/hisilicon/Kconfig"
- source "drivers/reset/tegra/Kconfig"
- endif
|
