123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452 |
- // SPDX-License-Identifier: GPL-2.0-or-later
- /*
- * MachZ ZF-Logic Watchdog Timer driver for Linux
- *
- * The author does NOT admit liability nor provide warranty for
- * any of this software. This material is provided "AS-IS" in
- * the hope that it may be useful for others.
- *
- * Author: Fernando Fuganti <fuganti@conectiva.com.br>
- *
- * Based on sbc60xxwdt.c by Jakob Oestergaard
- *
- * We have two timers (wd#1, wd#2) driven by a 32 KHz clock with the
- * following periods:
- * wd#1 - 2 seconds;
- * wd#2 - 7.2 ms;
- * After the expiration of wd#1, it can generate a NMI, SCI, SMI, or
- * a system RESET and it starts wd#2 that unconditionally will RESET
- * the system when the counter reaches zero.
- *
- * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
- * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
- */
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- #include <linux/module.h>
- #include <linux/moduleparam.h>
- #include <linux/types.h>
- #include <linux/timer.h>
- #include <linux/jiffies.h>
- #include <linux/miscdevice.h>
- #include <linux/watchdog.h>
- #include <linux/fs.h>
- #include <linux/ioport.h>
- #include <linux/notifier.h>
- #include <linux/reboot.h>
- #include <linux/init.h>
- #include <linux/io.h>
- #include <linux/uaccess.h>
- /* ports */
- #define ZF_IOBASE 0x218
- #define INDEX 0x218
- #define DATA_B 0x219
- #define DATA_W 0x21A
- #define DATA_D 0x21A
- /* indexes */ /* size */
- #define ZFL_VERSION 0x02 /* 16 */
- #define CONTROL 0x10 /* 16 */
- #define STATUS 0x12 /* 8 */
- #define COUNTER_1 0x0C /* 16 */
- #define COUNTER_2 0x0E /* 8 */
- #define PULSE_LEN 0x0F /* 8 */
- /* controls */
- #define ENABLE_WD1 0x0001
- #define ENABLE_WD2 0x0002
- #define RESET_WD1 0x0010
- #define RESET_WD2 0x0020
- #define GEN_SCI 0x0100
- #define GEN_NMI 0x0200
- #define GEN_SMI 0x0400
- #define GEN_RESET 0x0800
- /* utilities */
- #define WD1 0
- #define WD2 1
- #define zf_writew(port, data) { outb(port, INDEX); outw(data, DATA_W); }
- #define zf_writeb(port, data) { outb(port, INDEX); outb(data, DATA_B); }
- #define zf_get_ZFL_version() zf_readw(ZFL_VERSION)
- static unsigned short zf_readw(unsigned char port)
- {
- outb(port, INDEX);
- return inw(DATA_W);
- }
- MODULE_AUTHOR("Fernando Fuganti <fuganti@conectiva.com.br>");
- MODULE_DESCRIPTION("MachZ ZF-Logic Watchdog driver");
- MODULE_LICENSE("GPL");
- static bool nowayout = WATCHDOG_NOWAYOUT;
- module_param(nowayout, bool, 0);
- MODULE_PARM_DESC(nowayout,
- "Watchdog cannot be stopped once started (default="
- __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
- #define PFX "machzwd"
- static const struct watchdog_info zf_info = {
- .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
- .firmware_version = 1,
- .identity = "ZF-Logic watchdog",
- };
- /*
- * action refers to action taken when watchdog resets
- * 0 = GEN_RESET
- * 1 = GEN_SMI
- * 2 = GEN_NMI
- * 3 = GEN_SCI
- * defaults to GEN_RESET (0)
- */
- static int action;
- module_param(action, int, 0);
- MODULE_PARM_DESC(action, "after watchdog resets, generate: "
- "0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI");
- static void zf_ping(struct timer_list *unused);
- static int zf_action = GEN_RESET;
- static unsigned long zf_is_open;
- static char zf_expect_close;
- static DEFINE_SPINLOCK(zf_port_lock);
- static DEFINE_TIMER(zf_timer, zf_ping);
- static unsigned long next_heartbeat;
- /* timeout for user land heart beat (10 seconds) */
- #define ZF_USER_TIMEO (HZ*10)
- /* timeout for hardware watchdog (~500ms) */
- #define ZF_HW_TIMEO (HZ/2)
- /* number of ticks on WD#1 (driven by a 32KHz clock, 2s) */
- #define ZF_CTIMEOUT 0xffff
- #ifndef ZF_DEBUG
- #define dprintk(format, args...)
- #else
- #define dprintk(format, args...) \
- pr_debug(":%s:%d: " format, __func__, __LINE__ , ## args)
- #endif
- static inline void zf_set_status(unsigned char new)
- {
- zf_writeb(STATUS, new);
- }
- /* CONTROL register functions */
- static inline unsigned short zf_get_control(void)
- {
- return zf_readw(CONTROL);
- }
- static inline void zf_set_control(unsigned short new)
- {
- zf_writew(CONTROL, new);
- }
- /* WD#? counter functions */
- /*
- * Just set counter value
- */
- static inline void zf_set_timer(unsigned short new, unsigned char n)
- {
- switch (n) {
- case WD1:
- zf_writew(COUNTER_1, new);
- /* fall through */
- case WD2:
- zf_writeb(COUNTER_2, new > 0xff ? 0xff : new);
- default:
- return;
- }
- }
- /*
- * stop hardware timer
- */
- static void zf_timer_off(void)
- {
- unsigned int ctrl_reg = 0;
- unsigned long flags;
- /* stop internal ping */
- del_timer_sync(&zf_timer);
- spin_lock_irqsave(&zf_port_lock, flags);
- /* stop watchdog timer */
- ctrl_reg = zf_get_control();
- ctrl_reg |= (ENABLE_WD1|ENABLE_WD2); /* disable wd1 and wd2 */
- ctrl_reg &= ~(ENABLE_WD1|ENABLE_WD2);
- zf_set_control(ctrl_reg);
- spin_unlock_irqrestore(&zf_port_lock, flags);
- pr_info("Watchdog timer is now disabled\n");
- }
- /*
- * start hardware timer
- */
- static void zf_timer_on(void)
- {
- unsigned int ctrl_reg = 0;
- unsigned long flags;
- spin_lock_irqsave(&zf_port_lock, flags);
- zf_writeb(PULSE_LEN, 0xff);
- zf_set_timer(ZF_CTIMEOUT, WD1);
- /* user land ping */
- next_heartbeat = jiffies + ZF_USER_TIMEO;
- /* start the timer for internal ping */
- mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO);
- /* start watchdog timer */
- ctrl_reg = zf_get_control();
- ctrl_reg |= (ENABLE_WD1|zf_action);
- zf_set_control(ctrl_reg);
- spin_unlock_irqrestore(&zf_port_lock, flags);
- pr_info("Watchdog timer is now enabled\n");
- }
- static void zf_ping(struct timer_list *unused)
- {
- unsigned int ctrl_reg = 0;
- unsigned long flags;
- zf_writeb(COUNTER_2, 0xff);
- if (time_before(jiffies, next_heartbeat)) {
- dprintk("time_before: %ld\n", next_heartbeat - jiffies);
- /*
- * reset event is activated by transition from 0 to 1 on
- * RESET_WD1 bit and we assume that it is already zero...
- */
- spin_lock_irqsave(&zf_port_lock, flags);
- ctrl_reg = zf_get_control();
- ctrl_reg |= RESET_WD1;
- zf_set_control(ctrl_reg);
- /* ...and nothing changes until here */
- ctrl_reg &= ~(RESET_WD1);
- zf_set_control(ctrl_reg);
- spin_unlock_irqrestore(&zf_port_lock, flags);
- mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO);
- } else
- pr_crit("I will reset your machine\n");
- }
- static ssize_t zf_write(struct file *file, const char __user *buf, size_t count,
- loff_t *ppos)
- {
- /* See if we got the magic character */
- if (count) {
- /*
- * no need to check for close confirmation
- * no way to disable watchdog ;)
- */
- if (!nowayout) {
- size_t ofs;
- /*
- * note: just in case someone wrote the magic character
- * five months ago...
- */
- zf_expect_close = 0;
- /* now scan */
- for (ofs = 0; ofs != count; ofs++) {
- char c;
- if (get_user(c, buf + ofs))
- return -EFAULT;
- if (c == 'V') {
- zf_expect_close = 42;
- dprintk("zf_expect_close = 42\n");
- }
- }
- }
- /*
- * Well, anyhow someone wrote to us,
- * we should return that favour
- */
- next_heartbeat = jiffies + ZF_USER_TIMEO;
- dprintk("user ping at %ld\n", jiffies);
- }
- return count;
- }
- static long zf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
- {
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- if (copy_to_user(argp, &zf_info, sizeof(zf_info)))
- return -EFAULT;
- break;
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user(0, p);
- case WDIOC_KEEPALIVE:
- zf_ping(NULL);
- break;
- default:
- return -ENOTTY;
- }
- return 0;
- }
- static int zf_open(struct inode *inode, struct file *file)
- {
- if (test_and_set_bit(0, &zf_is_open))
- return -EBUSY;
- if (nowayout)
- __module_get(THIS_MODULE);
- zf_timer_on();
- return stream_open(inode, file);
- }
- static int zf_close(struct inode *inode, struct file *file)
- {
- if (zf_expect_close == 42)
- zf_timer_off();
- else {
- del_timer(&zf_timer);
- pr_err("device file closed unexpectedly. Will not stop the WDT!\n");
- }
- clear_bit(0, &zf_is_open);
- zf_expect_close = 0;
- return 0;
- }
- /*
- * Notifier for system down
- */
- static int zf_notify_sys(struct notifier_block *this, unsigned long code,
- void *unused)
- {
- if (code == SYS_DOWN || code == SYS_HALT)
- zf_timer_off();
- return NOTIFY_DONE;
- }
- static const struct file_operations zf_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = zf_write,
- .unlocked_ioctl = zf_ioctl,
- .open = zf_open,
- .release = zf_close,
- };
- static struct miscdevice zf_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &zf_fops,
- };
- /*
- * The device needs to learn about soft shutdowns in order to
- * turn the timebomb registers off.
- */
- static struct notifier_block zf_notifier = {
- .notifier_call = zf_notify_sys,
- };
- static void __init zf_show_action(int act)
- {
- static const char * const str[] = { "RESET", "SMI", "NMI", "SCI" };
- pr_info("Watchdog using action = %s\n", str[act]);
- }
- static int __init zf_init(void)
- {
- int ret;
- pr_info("MachZ ZF-Logic Watchdog driver initializing\n");
- ret = zf_get_ZFL_version();
- if (!ret || ret == 0xffff) {
- pr_warn("no ZF-Logic found\n");
- return -ENODEV;
- }
- if (action <= 3 && action >= 0)
- zf_action = zf_action >> action;
- else
- action = 0;
- zf_show_action(action);
- if (!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")) {
- pr_err("cannot reserve I/O ports at %d\n", ZF_IOBASE);
- ret = -EBUSY;
- goto no_region;
- }
- ret = register_reboot_notifier(&zf_notifier);
- if (ret) {
- pr_err("can't register reboot notifier (err=%d)\n", ret);
- goto no_reboot;
- }
- ret = misc_register(&zf_miscdev);
- if (ret) {
- pr_err("can't misc_register on minor=%d\n", WATCHDOG_MINOR);
- goto no_misc;
- }
- zf_set_status(0);
- zf_set_control(0);
- return 0;
- no_misc:
- unregister_reboot_notifier(&zf_notifier);
- no_reboot:
- release_region(ZF_IOBASE, 3);
- no_region:
- return ret;
- }
- static void __exit zf_exit(void)
- {
- zf_timer_off();
- misc_deregister(&zf_miscdev);
- unregister_reboot_notifier(&zf_notifier);
- release_region(ZF_IOBASE, 3);
- }
- module_init(zf_init);
- module_exit(zf_exit);
|