123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409 |
- // SPDX-License-Identifier: GPL-2.0
- /*
- * coh901327_wdt.c
- *
- * Copyright (C) 2008-2009 ST-Ericsson AB
- * Watchdog driver for the ST-Ericsson AB COH 901 327 IP core
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
- #include <linux/moduleparam.h>
- #include <linux/mod_devicetable.h>
- #include <linux/types.h>
- #include <linux/watchdog.h>
- #include <linux/interrupt.h>
- #include <linux/pm.h>
- #include <linux/platform_device.h>
- #include <linux/io.h>
- #include <linux/bitops.h>
- #include <linux/clk.h>
- #include <linux/delay.h>
- #include <linux/err.h>
- #define DRV_NAME "WDOG COH 901 327"
- /*
- * COH 901 327 register definitions
- */
- /* WDOG_FEED Register 32bit (-/W) */
- #define U300_WDOG_FR 0x00
- #define U300_WDOG_FR_FEED_RESTART_TIMER 0xFEEDU
- /* WDOG_TIMEOUT Register 32bit (R/W) */
- #define U300_WDOG_TR 0x04
- #define U300_WDOG_TR_TIMEOUT_MASK 0x7FFFU
- /* WDOG_DISABLE1 Register 32bit (-/W) */
- #define U300_WDOG_D1R 0x08
- #define U300_WDOG_D1R_DISABLE1_DISABLE_TIMER 0x2BADU
- /* WDOG_DISABLE2 Register 32bit (R/W) */
- #define U300_WDOG_D2R 0x0C
- #define U300_WDOG_D2R_DISABLE2_DISABLE_TIMER 0xCAFEU
- #define U300_WDOG_D2R_DISABLE_STATUS_DISABLED 0xDABEU
- #define U300_WDOG_D2R_DISABLE_STATUS_ENABLED 0x0000U
- /* WDOG_STATUS Register 32bit (R/W) */
- #define U300_WDOG_SR 0x10
- #define U300_WDOG_SR_STATUS_TIMED_OUT 0xCFE8U
- #define U300_WDOG_SR_STATUS_NORMAL 0x0000U
- #define U300_WDOG_SR_RESET_STATUS_RESET 0xE8B4U
- /* WDOG_COUNT Register 32bit (R/-) */
- #define U300_WDOG_CR 0x14
- #define U300_WDOG_CR_VALID_IND 0x8000U
- #define U300_WDOG_CR_VALID_STABLE 0x0000U
- #define U300_WDOG_CR_COUNT_VALUE_MASK 0x7FFFU
- /* WDOG_JTAGOVR Register 32bit (R/W) */
- #define U300_WDOG_JOR 0x18
- #define U300_WDOG_JOR_JTAG_MODE_IND 0x0002U
- #define U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE 0x0001U
- /* WDOG_RESTART Register 32bit (-/W) */
- #define U300_WDOG_RR 0x1C
- #define U300_WDOG_RR_RESTART_VALUE_RESUME 0xACEDU
- /* WDOG_IRQ_EVENT Register 32bit (R/W) */
- #define U300_WDOG_IER 0x20
- #define U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND 0x0001U
- #define U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE 0x0001U
- /* WDOG_IRQ_MASK Register 32bit (R/W) */
- #define U300_WDOG_IMR 0x24
- #define U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE 0x0001U
- /* WDOG_IRQ_FORCE Register 32bit (R/W) */
- #define U300_WDOG_IFR 0x28
- #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE 0x0001U
- /* Default timeout in seconds = 1 minute */
- #define U300_WDOG_DEFAULT_TIMEOUT 60
- static unsigned int margin;
- static int irq;
- static void __iomem *virtbase;
- static struct device *parent;
- static struct clk *clk;
- /*
- * Enabling and disabling functions.
- */
- static void coh901327_enable(u16 timeout)
- {
- u16 val;
- unsigned long freq;
- unsigned long delay_ns;
- /* Restart timer if it is disabled */
- val = readw(virtbase + U300_WDOG_D2R);
- if (val == U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
- writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
- virtbase + U300_WDOG_RR);
- /* Acknowledge any pending interrupt so it doesn't just fire off */
- writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
- virtbase + U300_WDOG_IER);
- /*
- * The interrupt is cleared in the 32 kHz clock domain.
- * Wait 3 32 kHz cycles for it to take effect
- */
- freq = clk_get_rate(clk);
- delay_ns = DIV_ROUND_UP(1000000000, freq); /* Freq to ns and round up */
- delay_ns = 3 * delay_ns; /* Wait 3 cycles */
- ndelay(delay_ns);
- /* Enable the watchdog interrupt */
- writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
- /* Activate the watchdog timer */
- writew(timeout, virtbase + U300_WDOG_TR);
- /* Start the watchdog timer */
- writew(U300_WDOG_FR_FEED_RESTART_TIMER, virtbase + U300_WDOG_FR);
- /*
- * Extra read so that this change propagate in the watchdog.
- */
- (void) readw(virtbase + U300_WDOG_CR);
- val = readw(virtbase + U300_WDOG_D2R);
- if (val != U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
- dev_err(parent,
- "%s(): watchdog not enabled! D2R value %04x\n",
- __func__, val);
- }
- static void coh901327_disable(void)
- {
- u16 val;
- /* Disable the watchdog interrupt if it is active */
- writew(0x0000U, virtbase + U300_WDOG_IMR);
- /* If the watchdog is currently enabled, attempt to disable it */
- val = readw(virtbase + U300_WDOG_D2R);
- if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED) {
- writew(U300_WDOG_D1R_DISABLE1_DISABLE_TIMER,
- virtbase + U300_WDOG_D1R);
- writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
- virtbase + U300_WDOG_D2R);
- /* Write this twice (else problems occur) */
- writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
- virtbase + U300_WDOG_D2R);
- }
- val = readw(virtbase + U300_WDOG_D2R);
- if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
- dev_err(parent,
- "%s(): watchdog not disabled! D2R value %04x\n",
- __func__, val);
- }
- static int coh901327_start(struct watchdog_device *wdt_dev)
- {
- coh901327_enable(wdt_dev->timeout * 100);
- return 0;
- }
- static int coh901327_stop(struct watchdog_device *wdt_dev)
- {
- coh901327_disable();
- return 0;
- }
- static int coh901327_ping(struct watchdog_device *wdd)
- {
- /* Feed the watchdog */
- writew(U300_WDOG_FR_FEED_RESTART_TIMER,
- virtbase + U300_WDOG_FR);
- return 0;
- }
- static int coh901327_settimeout(struct watchdog_device *wdt_dev,
- unsigned int time)
- {
- wdt_dev->timeout = time;
- /* Set new timeout value */
- writew(time * 100, virtbase + U300_WDOG_TR);
- /* Feed the dog */
- writew(U300_WDOG_FR_FEED_RESTART_TIMER,
- virtbase + U300_WDOG_FR);
- return 0;
- }
- static unsigned int coh901327_gettimeleft(struct watchdog_device *wdt_dev)
- {
- u16 val;
- /* Read repeatedly until the value is stable! */
- val = readw(virtbase + U300_WDOG_CR);
- while (val & U300_WDOG_CR_VALID_IND)
- val = readw(virtbase + U300_WDOG_CR);
- val &= U300_WDOG_CR_COUNT_VALUE_MASK;
- if (val != 0)
- val /= 100;
- return val;
- }
- /*
- * This interrupt occurs 10 ms before the watchdog WILL bark.
- */
- static irqreturn_t coh901327_interrupt(int irq, void *data)
- {
- u16 val;
- /*
- * Ack IRQ? If this occurs we're FUBAR anyway, so
- * just acknowledge, disable the interrupt and await the imminent end.
- * If you at some point need a host of callbacks to be called
- * when the system is about to watchdog-reset, add them here!
- *
- * NOTE: on future versions of this IP-block, it will be possible
- * to prevent a watchdog reset by feeding the watchdog at this
- * point.
- */
- val = readw(virtbase + U300_WDOG_IER);
- if (val == U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND)
- writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
- virtbase + U300_WDOG_IER);
- writew(0x0000U, virtbase + U300_WDOG_IMR);
- dev_crit(parent, "watchdog is barking!\n");
- return IRQ_HANDLED;
- }
- static const struct watchdog_info coh901327_ident = {
- .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
- .identity = DRV_NAME,
- };
- static const struct watchdog_ops coh901327_ops = {
- .owner = THIS_MODULE,
- .start = coh901327_start,
- .stop = coh901327_stop,
- .ping = coh901327_ping,
- .set_timeout = coh901327_settimeout,
- .get_timeleft = coh901327_gettimeleft,
- };
- static struct watchdog_device coh901327_wdt = {
- .info = &coh901327_ident,
- .ops = &coh901327_ops,
- /*
- * Max timeout is 327 since the 10ms
- * timeout register is max
- * 0x7FFF = 327670ms ~= 327s.
- */
- .min_timeout = 1,
- .max_timeout = 327,
- .timeout = U300_WDOG_DEFAULT_TIMEOUT,
- };
- static int __init coh901327_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
- int ret;
- u16 val;
- parent = dev;
- virtbase = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(virtbase))
- return PTR_ERR(virtbase);
- clk = clk_get(dev, NULL);
- if (IS_ERR(clk)) {
- ret = PTR_ERR(clk);
- dev_err(dev, "could not get clock\n");
- return ret;
- }
- ret = clk_prepare_enable(clk);
- if (ret) {
- dev_err(dev, "could not prepare and enable clock\n");
- goto out_no_clk_enable;
- }
- val = readw(virtbase + U300_WDOG_SR);
- switch (val) {
- case U300_WDOG_SR_STATUS_TIMED_OUT:
- dev_info(dev, "watchdog timed out since last chip reset!\n");
- coh901327_wdt.bootstatus |= WDIOF_CARDRESET;
- /* Status will be cleared below */
- break;
- case U300_WDOG_SR_STATUS_NORMAL:
- dev_info(dev, "in normal status, no timeouts have occurred.\n");
- break;
- default:
- dev_info(dev, "contains an illegal status code (%08x)\n", val);
- break;
- }
- val = readw(virtbase + U300_WDOG_D2R);
- switch (val) {
- case U300_WDOG_D2R_DISABLE_STATUS_DISABLED:
- dev_info(dev, "currently disabled.\n");
- break;
- case U300_WDOG_D2R_DISABLE_STATUS_ENABLED:
- dev_info(dev, "currently enabled! (disabling it now)\n");
- coh901327_disable();
- break;
- default:
- dev_err(dev, "contains an illegal enable/disable code (%08x)\n",
- val);
- break;
- }
- /* Reset the watchdog */
- writew(U300_WDOG_SR_RESET_STATUS_RESET, virtbase + U300_WDOG_SR);
- irq = platform_get_irq(pdev, 0);
- if (request_irq(irq, coh901327_interrupt, 0,
- DRV_NAME " Bark", pdev)) {
- ret = -EIO;
- goto out_no_irq;
- }
- watchdog_init_timeout(&coh901327_wdt, margin, dev);
- coh901327_wdt.parent = dev;
- ret = watchdog_register_device(&coh901327_wdt);
- if (ret)
- goto out_no_wdog;
- dev_info(dev, "initialized. (timeout=%d sec)\n",
- coh901327_wdt.timeout);
- return 0;
- out_no_wdog:
- free_irq(irq, pdev);
- out_no_irq:
- clk_disable_unprepare(clk);
- out_no_clk_enable:
- clk_put(clk);
- return ret;
- }
- #ifdef CONFIG_PM
- static u16 wdogenablestore;
- static u16 irqmaskstore;
- static int coh901327_suspend(struct platform_device *pdev, pm_message_t state)
- {
- irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U;
- wdogenablestore = readw(virtbase + U300_WDOG_D2R);
- /* If watchdog is on, disable it here and now */
- if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
- coh901327_disable();
- return 0;
- }
- static int coh901327_resume(struct platform_device *pdev)
- {
- /* Restore the watchdog interrupt */
- writew(irqmaskstore, virtbase + U300_WDOG_IMR);
- if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED) {
- /* Restart the watchdog timer */
- writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
- virtbase + U300_WDOG_RR);
- writew(U300_WDOG_FR_FEED_RESTART_TIMER,
- virtbase + U300_WDOG_FR);
- }
- return 0;
- }
- #else
- #define coh901327_suspend NULL
- #define coh901327_resume NULL
- #endif
- /*
- * Mistreating the watchdog is the only way to perform a software reset of the
- * system on EMP platforms. So we implement this and export a symbol for it.
- */
- void coh901327_watchdog_reset(void)
- {
- /* Enable even if on JTAG too */
- writew(U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE,
- virtbase + U300_WDOG_JOR);
- /*
- * Timeout = 5s, we have to wait for the watchdog reset to
- * actually take place: the watchdog will be reloaded with the
- * default value immediately, so we HAVE to reboot and get back
- * into the kernel in 30s, or the device will reboot again!
- * The boot loader will typically deactivate the watchdog, so we
- * need time enough for the boot loader to get to the point of
- * deactivating the watchdog before it is shut down by it.
- *
- * NOTE: on future versions of the watchdog, this restriction is
- * gone: the watchdog will be reloaded with a default value (1 min)
- * instead of last value, and you can conveniently set the watchdog
- * timeout to 10ms (value = 1) without any problems.
- */
- coh901327_enable(500);
- /* Return and await doom */
- }
- static const struct of_device_id coh901327_dt_match[] = {
- { .compatible = "stericsson,coh901327" },
- {},
- };
- static struct platform_driver coh901327_driver = {
- .driver = {
- .name = "coh901327_wdog",
- .of_match_table = coh901327_dt_match,
- .suppress_bind_attrs = true,
- },
- .suspend = coh901327_suspend,
- .resume = coh901327_resume,
- };
- builtin_platform_driver_probe(coh901327_driver, coh901327_probe);
- /* not really modular, but ... */
- module_param(margin, uint, 0);
- MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
|