123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451 |
- // SPDX-License-Identifier: GPL-2.0-only
- /*
- * ALi M7101 PMU Computer Watchdog Timer driver
- *
- * Based on w83877f_wdt.c by Scott Jennings <linuxdrivers@oro.net>
- * and the Cobalt kernel WDT timer driver by Tim Hockin
- * <thockin@cobaltnet.com>
- *
- * (c)2002 Steve Hill <steve@navaho.co.uk>
- *
- * This WDT driver is different from most other Linux WDT
- * drivers in that the driver will ping the watchdog by itself,
- * because this particular WDT has a very short timeout (1.6
- * seconds) and it would be insane to count on any userspace
- * daemon always getting scheduled within that time frame.
- *
- * Additions:
- * Aug 23, 2004 - Added use_gpio module parameter for use on revision a1d PMUs
- * found on very old cobalt hardware.
- * -- Mike Waychison <michael.waychison@sun.com>
- */
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- #include <linux/module.h>
- #include <linux/moduleparam.h>
- #include <linux/types.h>
- #include <linux/timer.h>
- #include <linux/miscdevice.h>
- #include <linux/watchdog.h>
- #include <linux/ioport.h>
- #include <linux/notifier.h>
- #include <linux/reboot.h>
- #include <linux/init.h>
- #include <linux/fs.h>
- #include <linux/pci.h>
- #include <linux/io.h>
- #include <linux/uaccess.h>
- #define WDT_ENABLE 0x9C
- #define WDT_DISABLE 0x8C
- #define ALI_7101_WDT 0x92
- #define ALI_7101_GPIO 0x7D
- #define ALI_7101_GPIO_O 0x7E
- #define ALI_WDT_ARM 0x01
- /*
- * We're going to use a 1 second timeout.
- * If we reset the watchdog every ~250ms we should be safe. */
- #define WDT_INTERVAL (HZ/4+1)
- /*
- * We must not require too good response from the userspace daemon.
- * Here we require the userspace daemon to send us a heartbeat
- * char to /dev/watchdog every 30 seconds.
- */
- #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */
- /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
- static int timeout = WATCHDOG_TIMEOUT;
- module_param(timeout, int, 0);
- MODULE_PARM_DESC(timeout,
- "Watchdog timeout in seconds. (1<=timeout<=3600, default="
- __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
- static int use_gpio; /* Use the pic (for a1d revision alim7101) */
- module_param(use_gpio, int, 0);
- MODULE_PARM_DESC(use_gpio,
- "Use the gpio watchdog (required by old cobalt boards).");
- static void wdt_timer_ping(struct timer_list *);
- static DEFINE_TIMER(timer, wdt_timer_ping);
- static unsigned long next_heartbeat;
- static unsigned long wdt_is_open;
- static char wdt_expect_close;
- static struct pci_dev *alim7101_pmu;
- static bool nowayout = WATCHDOG_NOWAYOUT;
- module_param(nowayout, bool, 0);
- MODULE_PARM_DESC(nowayout,
- "Watchdog cannot be stopped once started (default="
- __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
- /*
- * Whack the dog
- */
- static void wdt_timer_ping(struct timer_list *unused)
- {
- /* If we got a heartbeat pulse within the WDT_US_INTERVAL
- * we agree to ping the WDT
- */
- char tmp;
- if (time_before(jiffies, next_heartbeat)) {
- /* Ping the WDT (this is actually a disarm/arm sequence) */
- pci_read_config_byte(alim7101_pmu, 0x92, &tmp);
- pci_write_config_byte(alim7101_pmu,
- ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
- pci_write_config_byte(alim7101_pmu,
- ALI_7101_WDT, (tmp | ALI_WDT_ARM));
- if (use_gpio) {
- pci_read_config_byte(alim7101_pmu,
- ALI_7101_GPIO_O, &tmp);
- pci_write_config_byte(alim7101_pmu,
- ALI_7101_GPIO_O, tmp | 0x20);
- pci_write_config_byte(alim7101_pmu,
- ALI_7101_GPIO_O, tmp & ~0x20);
- }
- } else {
- pr_warn("Heartbeat lost! Will not ping the watchdog\n");
- }
- /* Re-set the timer interval */
- mod_timer(&timer, jiffies + WDT_INTERVAL);
- }
- /*
- * Utility routines
- */
- static void wdt_change(int writeval)
- {
- char tmp;
- pci_read_config_byte(alim7101_pmu, ALI_7101_WDT, &tmp);
- if (writeval == WDT_ENABLE) {
- pci_write_config_byte(alim7101_pmu,
- ALI_7101_WDT, (tmp | ALI_WDT_ARM));
- if (use_gpio) {
- pci_read_config_byte(alim7101_pmu,
- ALI_7101_GPIO_O, &tmp);
- pci_write_config_byte(alim7101_pmu,
- ALI_7101_GPIO_O, tmp & ~0x20);
- }
- } else {
- pci_write_config_byte(alim7101_pmu,
- ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
- if (use_gpio) {
- pci_read_config_byte(alim7101_pmu,
- ALI_7101_GPIO_O, &tmp);
- pci_write_config_byte(alim7101_pmu,
- ALI_7101_GPIO_O, tmp | 0x20);
- }
- }
- }
- static void wdt_startup(void)
- {
- next_heartbeat = jiffies + (timeout * HZ);
- /* We must enable before we kick off the timer in case the timer
- occurs as we ping it */
- wdt_change(WDT_ENABLE);
- /* Start the timer */
- mod_timer(&timer, jiffies + WDT_INTERVAL);
- pr_info("Watchdog timer is now enabled\n");
- }
- static void wdt_turnoff(void)
- {
- /* Stop the timer */
- del_timer_sync(&timer);
- wdt_change(WDT_DISABLE);
- pr_info("Watchdog timer is now disabled...\n");
- }
- static void wdt_keepalive(void)
- {
- /* user land ping */
- next_heartbeat = jiffies + (timeout * HZ);
- }
- /*
- * /dev/watchdog handling
- */
- static ssize_t fop_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
- {
- /* See if we got the magic character 'V' and reload the timer */
- if (count) {
- if (!nowayout) {
- size_t ofs;
- /* note: just in case someone wrote the magic character
- * five months ago... */
- wdt_expect_close = 0;
- /* now scan */
- for (ofs = 0; ofs != count; ofs++) {
- char c;
- if (get_user(c, buf + ofs))
- return -EFAULT;
- if (c == 'V')
- wdt_expect_close = 42;
- }
- }
- /* someone wrote to us, we should restart timer */
- wdt_keepalive();
- }
- return count;
- }
- static int fop_open(struct inode *inode, struct file *file)
- {
- /* Just in case we're already talking to someone... */
- if (test_and_set_bit(0, &wdt_is_open))
- return -EBUSY;
- /* Good, fire up the show */
- wdt_startup();
- return stream_open(inode, file);
- }
- static int fop_close(struct inode *inode, struct file *file)
- {
- if (wdt_expect_close == 42)
- wdt_turnoff();
- else {
- /* wim: shouldn't there be a: del_timer(&timer); */
- pr_crit("device file closed unexpectedly. Will not stop the WDT!\n");
- }
- clear_bit(0, &wdt_is_open);
- wdt_expect_close = 0;
- return 0;
- }
- static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
- {
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
- static const struct watchdog_info ident = {
- .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
- | WDIOF_MAGICCLOSE,
- .firmware_version = 1,
- .identity = "ALiM7101",
- };
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user(0, p);
- case WDIOC_SETOPTIONS:
- {
- int new_options, retval = -EINVAL;
- if (get_user(new_options, p))
- return -EFAULT;
- if (new_options & WDIOS_DISABLECARD) {
- wdt_turnoff();
- retval = 0;
- }
- if (new_options & WDIOS_ENABLECARD) {
- wdt_startup();
- retval = 0;
- }
- return retval;
- }
- case WDIOC_KEEPALIVE:
- wdt_keepalive();
- return 0;
- case WDIOC_SETTIMEOUT:
- {
- int new_timeout;
- if (get_user(new_timeout, p))
- return -EFAULT;
- /* arbitrary upper limit */
- if (new_timeout < 1 || new_timeout > 3600)
- return -EINVAL;
- timeout = new_timeout;
- wdt_keepalive();
- }
- /* Fall through */
- case WDIOC_GETTIMEOUT:
- return put_user(timeout, p);
- default:
- return -ENOTTY;
- }
- }
- static const struct file_operations wdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = fop_write,
- .open = fop_open,
- .release = fop_close,
- .unlocked_ioctl = fop_ioctl,
- };
- static struct miscdevice wdt_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &wdt_fops,
- };
- static int wdt_restart_handle(struct notifier_block *this, unsigned long mode,
- void *cmd)
- {
- /*
- * Cobalt devices have no way of rebooting themselves other
- * than getting the watchdog to pull reset, so we restart the
- * watchdog on reboot with no heartbeat.
- */
- wdt_change(WDT_ENABLE);
- /* loop until the watchdog fires */
- while (true)
- ;
- return NOTIFY_DONE;
- }
- static struct notifier_block wdt_restart_handler = {
- .notifier_call = wdt_restart_handle,
- .priority = 128,
- };
- /*
- * Notifier for system down
- */
- static int wdt_notify_sys(struct notifier_block *this,
- unsigned long code, void *unused)
- {
- if (code == SYS_DOWN || code == SYS_HALT)
- wdt_turnoff();
- return NOTIFY_DONE;
- }
- /*
- * The WDT needs to learn about soft shutdowns in order to
- * turn the timebomb registers off.
- */
- static struct notifier_block wdt_notifier = {
- .notifier_call = wdt_notify_sys,
- };
- static void __exit alim7101_wdt_unload(void)
- {
- wdt_turnoff();
- /* Deregister */
- misc_deregister(&wdt_miscdev);
- unregister_reboot_notifier(&wdt_notifier);
- unregister_restart_handler(&wdt_restart_handler);
- pci_dev_put(alim7101_pmu);
- }
- static int __init alim7101_wdt_init(void)
- {
- int rc = -EBUSY;
- struct pci_dev *ali1543_south;
- char tmp;
- pr_info("Steve Hill <steve@navaho.co.uk>\n");
- alim7101_pmu = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,
- NULL);
- if (!alim7101_pmu) {
- pr_info("ALi M7101 PMU not present - WDT not set\n");
- return -EBUSY;
- }
- /* Set the WDT in the PMU to 1 second */
- pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, 0x02);
- ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
- NULL);
- if (!ali1543_south) {
- pr_info("ALi 1543 South-Bridge not present - WDT not set\n");
- goto err_out;
- }
- pci_read_config_byte(ali1543_south, 0x5e, &tmp);
- pci_dev_put(ali1543_south);
- if ((tmp & 0x1e) == 0x00) {
- if (!use_gpio) {
- pr_info("Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.\n");
- goto err_out;
- }
- nowayout = 1;
- } else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) {
- pr_info("ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n");
- goto err_out;
- }
- if (timeout < 1 || timeout > 3600) {
- /* arbitrary upper limit */
- timeout = WATCHDOG_TIMEOUT;
- pr_info("timeout value must be 1 <= x <= 3600, using %d\n",
- timeout);
- }
- rc = register_reboot_notifier(&wdt_notifier);
- if (rc) {
- pr_err("cannot register reboot notifier (err=%d)\n", rc);
- goto err_out;
- }
- rc = register_restart_handler(&wdt_restart_handler);
- if (rc) {
- pr_err("cannot register restart handler (err=%d)\n", rc);
- goto err_out_reboot;
- }
- rc = misc_register(&wdt_miscdev);
- if (rc) {
- pr_err("cannot register miscdev on minor=%d (err=%d)\n",
- wdt_miscdev.minor, rc);
- goto err_out_restart;
- }
- if (nowayout)
- __module_get(THIS_MODULE);
- pr_info("WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n",
- timeout, nowayout);
- return 0;
- err_out_restart:
- unregister_restart_handler(&wdt_restart_handler);
- err_out_reboot:
- unregister_reboot_notifier(&wdt_notifier);
- err_out:
- pci_dev_put(alim7101_pmu);
- return rc;
- }
- module_init(alim7101_wdt_init);
- module_exit(alim7101_wdt_unload);
- static const struct pci_device_id alim7101_pci_tbl[] __used = {
- { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533) },
- { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
- { }
- };
- MODULE_DEVICE_TABLE(pci, alim7101_pci_tbl);
- MODULE_AUTHOR("Steve Hill");
- MODULE_DESCRIPTION("ALi M7101 PMU Computer Watchdog Timer driver");
- MODULE_LICENSE("GPL");
|