123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617 |
- // SPDX-License-Identifier: GPL-2.0-only
- /*
- * Device handling thread implementation for mac80211 ST-Ericsson CW1200 drivers
- *
- * Copyright (c) 2010, ST-Ericsson
- * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
- *
- * Based on:
- * ST-Ericsson UMAC CW1200 driver, which is
- * Copyright (c) 2010, ST-Ericsson
- * Author: Ajitpal Singh <ajitpal.singh@stericsson.com>
- */
- #include <linux/module.h>
- #include <net/mac80211.h>
- #include <linux/kthread.h>
- #include <linux/timer.h>
- #include "cw1200.h"
- #include "bh.h"
- #include "hwio.h"
- #include "wsm.h"
- #include "hwbus.h"
- #include "debug.h"
- #include "fwio.h"
- static int cw1200_bh(void *arg);
- #define DOWNLOAD_BLOCK_SIZE_WR (0x1000 - 4)
- /* an SPI message cannot be bigger than (2"12-1)*2 bytes
- * "*2" to cvt to bytes
- */
- #define MAX_SZ_RD_WR_BUFFERS (DOWNLOAD_BLOCK_SIZE_WR*2)
- #define PIGGYBACK_CTRL_REG (2)
- #define EFFECTIVE_BUF_SIZE (MAX_SZ_RD_WR_BUFFERS - PIGGYBACK_CTRL_REG)
- /* Suspend state privates */
- enum cw1200_bh_pm_state {
- CW1200_BH_RESUMED = 0,
- CW1200_BH_SUSPEND,
- CW1200_BH_SUSPENDED,
- CW1200_BH_RESUME,
- };
- typedef int (*cw1200_wsm_handler)(struct cw1200_common *priv,
- u8 *data, size_t size);
- static void cw1200_bh_work(struct work_struct *work)
- {
- struct cw1200_common *priv =
- container_of(work, struct cw1200_common, bh_work);
- cw1200_bh(priv);
- }
- int cw1200_register_bh(struct cw1200_common *priv)
- {
- int err = 0;
- /* Realtime workqueue */
- priv->bh_workqueue = alloc_workqueue("cw1200_bh",
- WQ_MEM_RECLAIM | WQ_HIGHPRI
- | WQ_CPU_INTENSIVE, 1);
- if (!priv->bh_workqueue)
- return -ENOMEM;
- INIT_WORK(&priv->bh_work, cw1200_bh_work);
- pr_debug("[BH] register.\n");
- atomic_set(&priv->bh_rx, 0);
- atomic_set(&priv->bh_tx, 0);
- atomic_set(&priv->bh_term, 0);
- atomic_set(&priv->bh_suspend, CW1200_BH_RESUMED);
- priv->bh_error = 0;
- priv->hw_bufs_used = 0;
- priv->buf_id_tx = 0;
- priv->buf_id_rx = 0;
- init_waitqueue_head(&priv->bh_wq);
- init_waitqueue_head(&priv->bh_evt_wq);
- err = !queue_work(priv->bh_workqueue, &priv->bh_work);
- WARN_ON(err);
- return err;
- }
- void cw1200_unregister_bh(struct cw1200_common *priv)
- {
- atomic_add(1, &priv->bh_term);
- wake_up(&priv->bh_wq);
- flush_workqueue(priv->bh_workqueue);
- destroy_workqueue(priv->bh_workqueue);
- priv->bh_workqueue = NULL;
- pr_debug("[BH] unregistered.\n");
- }
- void cw1200_irq_handler(struct cw1200_common *priv)
- {
- pr_debug("[BH] irq.\n");
- /* Disable Interrupts! */
- /* NOTE: hwbus_ops->lock already held */
- __cw1200_irq_enable(priv, 0);
- if (/* WARN_ON */(priv->bh_error))
- return;
- if (atomic_add_return(1, &priv->bh_rx) == 1)
- wake_up(&priv->bh_wq);
- }
- EXPORT_SYMBOL_GPL(cw1200_irq_handler);
- void cw1200_bh_wakeup(struct cw1200_common *priv)
- {
- pr_debug("[BH] wakeup.\n");
- if (priv->bh_error) {
- pr_err("[BH] wakeup failed (BH error)\n");
- return;
- }
- if (atomic_add_return(1, &priv->bh_tx) == 1)
- wake_up(&priv->bh_wq);
- }
- int cw1200_bh_suspend(struct cw1200_common *priv)
- {
- pr_debug("[BH] suspend.\n");
- if (priv->bh_error) {
- wiphy_warn(priv->hw->wiphy, "BH error -- can't suspend\n");
- return -EINVAL;
- }
- atomic_set(&priv->bh_suspend, CW1200_BH_SUSPEND);
- wake_up(&priv->bh_wq);
- return wait_event_timeout(priv->bh_evt_wq, priv->bh_error ||
- (CW1200_BH_SUSPENDED == atomic_read(&priv->bh_suspend)),
- 1 * HZ) ? 0 : -ETIMEDOUT;
- }
- int cw1200_bh_resume(struct cw1200_common *priv)
- {
- pr_debug("[BH] resume.\n");
- if (priv->bh_error) {
- wiphy_warn(priv->hw->wiphy, "BH error -- can't resume\n");
- return -EINVAL;
- }
- atomic_set(&priv->bh_suspend, CW1200_BH_RESUME);
- wake_up(&priv->bh_wq);
- return wait_event_timeout(priv->bh_evt_wq, priv->bh_error ||
- (CW1200_BH_RESUMED == atomic_read(&priv->bh_suspend)),
- 1 * HZ) ? 0 : -ETIMEDOUT;
- }
- static inline void wsm_alloc_tx_buffer(struct cw1200_common *priv)
- {
- ++priv->hw_bufs_used;
- }
- int wsm_release_tx_buffer(struct cw1200_common *priv, int count)
- {
- int ret = 0;
- int hw_bufs_used = priv->hw_bufs_used;
- priv->hw_bufs_used -= count;
- if (WARN_ON(priv->hw_bufs_used < 0))
- ret = -1;
- else if (hw_bufs_used >= priv->wsm_caps.input_buffers)
- ret = 1;
- if (!priv->hw_bufs_used)
- wake_up(&priv->bh_evt_wq);
- return ret;
- }
- static int cw1200_bh_read_ctrl_reg(struct cw1200_common *priv,
- u16 *ctrl_reg)
- {
- int ret;
- ret = cw1200_reg_read_16(priv,
- ST90TDS_CONTROL_REG_ID, ctrl_reg);
- if (ret) {
- ret = cw1200_reg_read_16(priv,
- ST90TDS_CONTROL_REG_ID, ctrl_reg);
- if (ret)
- pr_err("[BH] Failed to read control register.\n");
- }
- return ret;
- }
- static int cw1200_device_wakeup(struct cw1200_common *priv)
- {
- u16 ctrl_reg;
- int ret;
- pr_debug("[BH] Device wakeup.\n");
- /* First, set the dpll register */
- ret = cw1200_reg_write_32(priv, ST90TDS_TSET_GEN_R_W_REG_ID,
- cw1200_dpll_from_clk(priv->hw_refclk));
- if (WARN_ON(ret))
- return ret;
- /* To force the device to be always-on, the host sets WLAN_UP to 1 */
- ret = cw1200_reg_write_16(priv, ST90TDS_CONTROL_REG_ID,
- ST90TDS_CONT_WUP_BIT);
- if (WARN_ON(ret))
- return ret;
- ret = cw1200_bh_read_ctrl_reg(priv, &ctrl_reg);
- if (WARN_ON(ret))
- return ret;
- /* If the device returns WLAN_RDY as 1, the device is active and will
- * remain active.
- */
- if (ctrl_reg & ST90TDS_CONT_RDY_BIT) {
- pr_debug("[BH] Device awake.\n");
- return 1;
- }
- return 0;
- }
- /* Must be called from BH thraed. */
- void cw1200_enable_powersave(struct cw1200_common *priv,
- bool enable)
- {
- pr_debug("[BH] Powerave is %s.\n",
- enable ? "enabled" : "disabled");
- priv->powersave_enabled = enable;
- }
- static int cw1200_bh_rx_helper(struct cw1200_common *priv,
- uint16_t *ctrl_reg,
- int *tx)
- {
- size_t read_len = 0;
- struct sk_buff *skb_rx = NULL;
- struct wsm_hdr *wsm;
- size_t wsm_len;
- u16 wsm_id;
- u8 wsm_seq;
- int rx_resync = 1;
- size_t alloc_len;
- u8 *data;
- read_len = (*ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) * 2;
- if (!read_len)
- return 0; /* No more work */
- if (WARN_ON((read_len < sizeof(struct wsm_hdr)) ||
- (read_len > EFFECTIVE_BUF_SIZE))) {
- pr_debug("Invalid read len: %zu (%04x)",
- read_len, *ctrl_reg);
- goto err;
- }
- /* Add SIZE of PIGGYBACK reg (CONTROL Reg)
- * to the NEXT Message length + 2 Bytes for SKB
- */
- read_len = read_len + 2;
- alloc_len = priv->hwbus_ops->align_size(
- priv->hwbus_priv, read_len);
- /* Check if not exceeding CW1200 capabilities */
- if (WARN_ON_ONCE(alloc_len > EFFECTIVE_BUF_SIZE)) {
- pr_debug("Read aligned len: %zu\n",
- alloc_len);
- }
- skb_rx = dev_alloc_skb(alloc_len);
- if (WARN_ON(!skb_rx))
- goto err;
- skb_trim(skb_rx, 0);
- skb_put(skb_rx, read_len);
- data = skb_rx->data;
- if (WARN_ON(!data))
- goto err;
- if (WARN_ON(cw1200_data_read(priv, data, alloc_len))) {
- pr_err("rx blew up, len %zu\n", alloc_len);
- goto err;
- }
- /* Piggyback */
- *ctrl_reg = __le16_to_cpu(
- ((__le16 *)data)[alloc_len / 2 - 1]);
- wsm = (struct wsm_hdr *)data;
- wsm_len = __le16_to_cpu(wsm->len);
- if (WARN_ON(wsm_len > read_len))
- goto err;
- if (priv->wsm_enable_wsm_dumps)
- print_hex_dump_bytes("<-- ",
- DUMP_PREFIX_NONE,
- data, wsm_len);
- wsm_id = __le16_to_cpu(wsm->id) & 0xFFF;
- wsm_seq = (__le16_to_cpu(wsm->id) >> 13) & 7;
- skb_trim(skb_rx, wsm_len);
- if (wsm_id == 0x0800) {
- wsm_handle_exception(priv,
- &data[sizeof(*wsm)],
- wsm_len - sizeof(*wsm));
- goto err;
- } else if (!rx_resync) {
- if (WARN_ON(wsm_seq != priv->wsm_rx_seq))
- goto err;
- }
- priv->wsm_rx_seq = (wsm_seq + 1) & 7;
- rx_resync = 0;
- if (wsm_id & 0x0400) {
- int rc = wsm_release_tx_buffer(priv, 1);
- if (WARN_ON(rc < 0))
- return rc;
- else if (rc > 0)
- *tx = 1;
- }
- /* cw1200_wsm_rx takes care on SKB livetime */
- if (WARN_ON(wsm_handle_rx(priv, wsm_id, wsm, &skb_rx)))
- goto err;
- if (skb_rx) {
- dev_kfree_skb(skb_rx);
- skb_rx = NULL;
- }
- return 0;
- err:
- if (skb_rx) {
- dev_kfree_skb(skb_rx);
- skb_rx = NULL;
- }
- return -1;
- }
- static int cw1200_bh_tx_helper(struct cw1200_common *priv,
- int *pending_tx,
- int *tx_burst)
- {
- size_t tx_len;
- u8 *data;
- int ret;
- struct wsm_hdr *wsm;
- if (priv->device_can_sleep) {
- ret = cw1200_device_wakeup(priv);
- if (WARN_ON(ret < 0)) { /* Error in wakeup */
- *pending_tx = 1;
- return 0;
- } else if (ret) { /* Woke up */
- priv->device_can_sleep = false;
- } else { /* Did not awake */
- *pending_tx = 1;
- return 0;
- }
- }
- wsm_alloc_tx_buffer(priv);
- ret = wsm_get_tx(priv, &data, &tx_len, tx_burst);
- if (ret <= 0) {
- wsm_release_tx_buffer(priv, 1);
- if (WARN_ON(ret < 0))
- return ret; /* Error */
- return 0; /* No work */
- }
- wsm = (struct wsm_hdr *)data;
- BUG_ON(tx_len < sizeof(*wsm));
- BUG_ON(__le16_to_cpu(wsm->len) != tx_len);
- atomic_add(1, &priv->bh_tx);
- tx_len = priv->hwbus_ops->align_size(
- priv->hwbus_priv, tx_len);
- /* Check if not exceeding CW1200 capabilities */
- if (WARN_ON_ONCE(tx_len > EFFECTIVE_BUF_SIZE))
- pr_debug("Write aligned len: %zu\n", tx_len);
- wsm->id &= __cpu_to_le16(0xffff ^ WSM_TX_SEQ(WSM_TX_SEQ_MAX));
- wsm->id |= __cpu_to_le16(WSM_TX_SEQ(priv->wsm_tx_seq));
- if (WARN_ON(cw1200_data_write(priv, data, tx_len))) {
- pr_err("tx blew up, len %zu\n", tx_len);
- wsm_release_tx_buffer(priv, 1);
- return -1; /* Error */
- }
- if (priv->wsm_enable_wsm_dumps)
- print_hex_dump_bytes("--> ",
- DUMP_PREFIX_NONE,
- data,
- __le16_to_cpu(wsm->len));
- wsm_txed(priv, data);
- priv->wsm_tx_seq = (priv->wsm_tx_seq + 1) & WSM_TX_SEQ_MAX;
- if (*tx_burst > 1) {
- cw1200_debug_tx_burst(priv);
- return 1; /* Work remains */
- }
- return 0;
- }
- static int cw1200_bh(void *arg)
- {
- struct cw1200_common *priv = arg;
- int rx, tx, term, suspend;
- u16 ctrl_reg = 0;
- int tx_allowed;
- int pending_tx = 0;
- int tx_burst;
- long status;
- u32 dummy;
- int ret;
- for (;;) {
- if (!priv->hw_bufs_used &&
- priv->powersave_enabled &&
- !priv->device_can_sleep &&
- !atomic_read(&priv->recent_scan)) {
- status = 1 * HZ;
- pr_debug("[BH] Device wakedown. No data.\n");
- cw1200_reg_write_16(priv, ST90TDS_CONTROL_REG_ID, 0);
- priv->device_can_sleep = true;
- } else if (priv->hw_bufs_used) {
- /* Interrupt loss detection */
- status = 1 * HZ;
- } else {
- status = MAX_SCHEDULE_TIMEOUT;
- }
- /* Dummy Read for SDIO retry mechanism*/
- if ((priv->hw_type != -1) &&
- (atomic_read(&priv->bh_rx) == 0) &&
- (atomic_read(&priv->bh_tx) == 0))
- cw1200_reg_read(priv, ST90TDS_CONFIG_REG_ID,
- &dummy, sizeof(dummy));
- pr_debug("[BH] waiting ...\n");
- status = wait_event_interruptible_timeout(priv->bh_wq, ({
- rx = atomic_xchg(&priv->bh_rx, 0);
- tx = atomic_xchg(&priv->bh_tx, 0);
- term = atomic_xchg(&priv->bh_term, 0);
- suspend = pending_tx ?
- 0 : atomic_read(&priv->bh_suspend);
- (rx || tx || term || suspend || priv->bh_error);
- }), status);
- pr_debug("[BH] - rx: %d, tx: %d, term: %d, bh_err: %d, suspend: %d, status: %ld\n",
- rx, tx, term, suspend, priv->bh_error, status);
- /* Did an error occur? */
- if ((status < 0 && status != -ERESTARTSYS) ||
- term || priv->bh_error) {
- break;
- }
- if (!status) { /* wait_event timed out */
- unsigned long timestamp = jiffies;
- long timeout;
- int pending = 0;
- int i;
- /* Check to see if we have any outstanding frames */
- if (priv->hw_bufs_used && (!rx || !tx)) {
- wiphy_warn(priv->hw->wiphy,
- "Missed interrupt? (%d frames outstanding)\n",
- priv->hw_bufs_used);
- rx = 1;
- /* Get a timestamp of "oldest" frame */
- for (i = 0; i < 4; ++i)
- pending += cw1200_queue_get_xmit_timestamp(
- &priv->tx_queue[i],
- ×tamp,
- priv->pending_frame_id);
- /* Check if frame transmission is timed out.
- * Add an extra second with respect to possible
- * interrupt loss.
- */
- timeout = timestamp +
- WSM_CMD_LAST_CHANCE_TIMEOUT +
- 1 * HZ -
- jiffies;
- /* And terminate BH thread if the frame is "stuck" */
- if (pending && timeout < 0) {
- wiphy_warn(priv->hw->wiphy,
- "Timeout waiting for TX confirm (%d/%d pending, %ld vs %lu).\n",
- priv->hw_bufs_used, pending,
- timestamp, jiffies);
- break;
- }
- } else if (!priv->device_can_sleep &&
- !atomic_read(&priv->recent_scan)) {
- pr_debug("[BH] Device wakedown. Timeout.\n");
- cw1200_reg_write_16(priv,
- ST90TDS_CONTROL_REG_ID, 0);
- priv->device_can_sleep = true;
- }
- goto done;
- } else if (suspend) {
- pr_debug("[BH] Device suspend.\n");
- if (priv->powersave_enabled) {
- pr_debug("[BH] Device wakedown. Suspend.\n");
- cw1200_reg_write_16(priv,
- ST90TDS_CONTROL_REG_ID, 0);
- priv->device_can_sleep = true;
- }
- atomic_set(&priv->bh_suspend, CW1200_BH_SUSPENDED);
- wake_up(&priv->bh_evt_wq);
- status = wait_event_interruptible(priv->bh_wq,
- CW1200_BH_RESUME == atomic_read(&priv->bh_suspend));
- if (status < 0) {
- wiphy_err(priv->hw->wiphy,
- "Failed to wait for resume: %ld.\n",
- status);
- break;
- }
- pr_debug("[BH] Device resume.\n");
- atomic_set(&priv->bh_suspend, CW1200_BH_RESUMED);
- wake_up(&priv->bh_evt_wq);
- atomic_add(1, &priv->bh_rx);
- goto done;
- }
- rx:
- tx += pending_tx;
- pending_tx = 0;
- if (cw1200_bh_read_ctrl_reg(priv, &ctrl_reg))
- break;
- /* Don't bother trying to rx unless we have data to read */
- if (ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) {
- ret = cw1200_bh_rx_helper(priv, &ctrl_reg, &tx);
- if (ret < 0)
- break;
- /* Double up here if there's more data.. */
- if (ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK) {
- ret = cw1200_bh_rx_helper(priv, &ctrl_reg, &tx);
- if (ret < 0)
- break;
- }
- }
- tx:
- if (tx) {
- tx = 0;
- BUG_ON(priv->hw_bufs_used > priv->wsm_caps.input_buffers);
- tx_burst = priv->wsm_caps.input_buffers - priv->hw_bufs_used;
- tx_allowed = tx_burst > 0;
- if (!tx_allowed) {
- /* Buffers full. Ensure we process tx
- * after we handle rx..
- */
- pending_tx = tx;
- goto done_rx;
- }
- ret = cw1200_bh_tx_helper(priv, &pending_tx, &tx_burst);
- if (ret < 0)
- break;
- if (ret > 0) /* More to transmit */
- tx = ret;
- /* Re-read ctrl reg */
- if (cw1200_bh_read_ctrl_reg(priv, &ctrl_reg))
- break;
- }
- done_rx:
- if (priv->bh_error)
- break;
- if (ctrl_reg & ST90TDS_CONT_NEXT_LEN_MASK)
- goto rx;
- if (tx)
- goto tx;
- done:
- /* Re-enable device interrupts */
- priv->hwbus_ops->lock(priv->hwbus_priv);
- __cw1200_irq_enable(priv, 1);
- priv->hwbus_ops->unlock(priv->hwbus_priv);
- }
- /* Explicitly disable device interrupts */
- priv->hwbus_ops->lock(priv->hwbus_priv);
- __cw1200_irq_enable(priv, 0);
- priv->hwbus_ops->unlock(priv->hwbus_priv);
- if (!term) {
- pr_err("[BH] Fatal error, exiting.\n");
- priv->bh_error = 1;
- /* TODO: schedule_work(recovery) */
- }
- return 0;
- }
|