| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125 |
- # SPDX-License-Identifier: GPL-2.0-only
- menuconfig FUSION
- bool "Fusion MPT device support"
- depends on PCI
- ---help---
- Say Y here to get to see options for Fusion Message
- Passing Technology (MPT) drivers.
- This option alone does not add any kernel code.
- If you say N, all options in this submenu will be skipped and disabled.
- if FUSION
- config FUSION_SPI
- tristate "Fusion MPT ScsiHost drivers for SPI"
- depends on PCI && SCSI
- select SCSI_SPI_ATTRS
- ---help---
- SCSI HOST support for a parallel SCSI host adapters.
- List of supported controllers:
- LSI53C1020
- LSI53C1020A
- LSI53C1030
- LSI53C1035
- ATTO UL4D
- config FUSION_FC
- tristate "Fusion MPT ScsiHost drivers for FC"
- depends on PCI && SCSI
- depends on SCSI_FC_ATTRS
- ---help---
- SCSI HOST support for a Fiber Channel host adapters.
- List of supported controllers:
- LSIFC909
- LSIFC919
- LSIFC919X
- LSIFC929
- LSIFC929X
- LSIFC929XL
- LSIFC949X
- LSIFC949E
- Brocade FC 410/420
- config FUSION_SAS
- tristate "Fusion MPT ScsiHost drivers for SAS"
- depends on PCI && SCSI
- select SCSI_SAS_ATTRS
- ---help---
- SCSI HOST support for a SAS host adapters.
- List of supported controllers:
- LSISAS1064
- LSISAS1068
- LSISAS1064E
- LSISAS1068E
- LSISAS1078
- config FUSION_MAX_SGE
- int "Maximum number of scatter gather entries (16 - 128)"
- default "128"
- range 16 128
- help
- This option allows you to specify the maximum number of scatter-
- gather entries per I/O. The driver default is 128, which matches
- SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16.
- Decreasing this parameter will reduce memory requirements
- on a per controller instance.
- config FUSION_CTL
- tristate "Fusion MPT misc device (ioctl) driver"
- depends on FUSION_SPI || FUSION_FC || FUSION_SAS
- ---help---
- The Fusion MPT misc device driver provides specialized control
- of MPT adapters via system ioctl calls. Use of ioctl calls to
- the MPT driver requires that you create and use a misc device
- node ala:
- mknod /dev/mptctl c 10 240
- One use of this ioctl interface is to perform an upgrade (reflash)
- of the MPT adapter firmware. Refer to readme file(s) distributed
- with the Fusion MPT linux driver for additional details.
- If enabled by saying M to this, a driver named: mptctl
- will be compiled.
- If unsure whether you really want or need this, say N.
- config FUSION_LAN
- tristate "Fusion MPT LAN driver"
- depends on FUSION_FC && NET_FC
- ---help---
- This module supports LAN IP traffic over Fibre Channel port(s)
- on Fusion MPT compatible hardware (LSIFC9xx chips).
- The physical interface used is defined in RFC 2625.
- Please refer to that document for details.
- Installing this driver requires the knowledge to configure and
- activate a new network interface, "fc0", using standard Linux tools.
- If enabled by saying M to this, a driver named: mptlan
- will be compiled.
- If unsure whether you really want or need this, say N.
- config FUSION_LOGGING
- bool "Fusion MPT logging facility"
- ---help---
- This turns on a logging facility that can be used to debug a number
- of Fusion MPT related problems.
- The debug level can be programmed on the fly via SysFS (hex values)
- echo [level] > /sys/class/scsi_host/host#/debug_level
- There are various debug levels that can be found in the source:
- file:drivers/message/fusion/mptdebug.h
- endif # FUSION
|
