123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536 |
- // SPDX-License-Identifier: GPL-2.0-only
- /*
- * Sharp VA3A5JZ921 One Seg Broadcast Module driver
- * This device is labeled as just S. 921 at the top of the frontend can
- *
- * Copyright (C) 2009-2010 Mauro Carvalho Chehab
- * Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com>
- *
- * Developed for Leadership SBTVD 1seg device sold in Brazil
- *
- * Frontend module based on cx24123 driver, getting some info from
- * the old s921 driver.
- *
- * FIXME: Need to port to DVB v5.2 API
- */
- #include <linux/kernel.h>
- #include <asm/div64.h>
- #include <media/dvb_frontend.h>
- #include "s921.h"
- static int debug = 1;
- module_param(debug, int, 0644);
- MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
- #define rc(args...) do { \
- printk(KERN_ERR "s921: " args); \
- } while (0)
- #define dprintk(args...) \
- do { \
- if (debug) { \
- printk(KERN_DEBUG "s921: %s: ", __func__); \
- printk(args); \
- } \
- } while (0)
- struct s921_state {
- struct i2c_adapter *i2c;
- const struct s921_config *config;
- struct dvb_frontend frontend;
- /* The Demod can't easily provide these, we cache them */
- u32 currentfreq;
- };
- /*
- * Various tuner defaults need to be established for a given frequency kHz.
- * fixme: The bounds on the bands do not match the doc in real life.
- * fixme: Some of them have been moved, other might need adjustment.
- */
- static struct s921_bandselect_val {
- u32 freq_low;
- u8 band_reg;
- } s921_bandselect[] = {
- { 0, 0x7b },
- { 485140000, 0x5b },
- { 515140000, 0x3b },
- { 545140000, 0x1b },
- { 599140000, 0xfb },
- { 623140000, 0xdb },
- { 659140000, 0xbb },
- { 713140000, 0x9b },
- };
- struct regdata {
- u8 reg;
- u8 data;
- };
- static struct regdata s921_init[] = {
- { 0x01, 0x80 }, /* Probably, a reset sequence */
- { 0x01, 0x40 },
- { 0x01, 0x80 },
- { 0x01, 0x40 },
- { 0x02, 0x00 },
- { 0x03, 0x40 },
- { 0x04, 0x01 },
- { 0x05, 0x00 },
- { 0x06, 0x00 },
- { 0x07, 0x00 },
- { 0x08, 0x00 },
- { 0x09, 0x00 },
- { 0x0a, 0x00 },
- { 0x0b, 0x5a },
- { 0x0c, 0x00 },
- { 0x0d, 0x00 },
- { 0x0f, 0x00 },
- { 0x13, 0x1b },
- { 0x14, 0x80 },
- { 0x15, 0x40 },
- { 0x17, 0x70 },
- { 0x18, 0x01 },
- { 0x19, 0x12 },
- { 0x1a, 0x01 },
- { 0x1b, 0x12 },
- { 0x1c, 0xa0 },
- { 0x1d, 0x00 },
- { 0x1e, 0x0a },
- { 0x1f, 0x08 },
- { 0x20, 0x40 },
- { 0x21, 0xff },
- { 0x22, 0x4c },
- { 0x23, 0x4e },
- { 0x24, 0x4c },
- { 0x25, 0x00 },
- { 0x26, 0x00 },
- { 0x27, 0xf4 },
- { 0x28, 0x60 },
- { 0x29, 0x88 },
- { 0x2a, 0x40 },
- { 0x2b, 0x40 },
- { 0x2c, 0xff },
- { 0x2d, 0x00 },
- { 0x2e, 0xff },
- { 0x2f, 0x00 },
- { 0x30, 0x20 },
- { 0x31, 0x06 },
- { 0x32, 0x0c },
- { 0x34, 0x0f },
- { 0x37, 0xfe },
- { 0x38, 0x00 },
- { 0x39, 0x63 },
- { 0x3a, 0x10 },
- { 0x3b, 0x10 },
- { 0x47, 0x00 },
- { 0x49, 0xe5 },
- { 0x4b, 0x00 },
- { 0x50, 0xc0 },
- { 0x52, 0x20 },
- { 0x54, 0x5a },
- { 0x55, 0x5b },
- { 0x56, 0x40 },
- { 0x57, 0x70 },
- { 0x5c, 0x50 },
- { 0x5d, 0x00 },
- { 0x62, 0x17 },
- { 0x63, 0x2f },
- { 0x64, 0x6f },
- { 0x68, 0x00 },
- { 0x69, 0x89 },
- { 0x6a, 0x00 },
- { 0x6b, 0x00 },
- { 0x6c, 0x00 },
- { 0x6d, 0x00 },
- { 0x6e, 0x00 },
- { 0x70, 0x10 },
- { 0x71, 0x00 },
- { 0x75, 0x00 },
- { 0x76, 0x30 },
- { 0x77, 0x01 },
- { 0xaf, 0x00 },
- { 0xb0, 0xa0 },
- { 0xb2, 0x3d },
- { 0xb3, 0x25 },
- { 0xb4, 0x8b },
- { 0xb5, 0x4b },
- { 0xb6, 0x3f },
- { 0xb7, 0xff },
- { 0xb8, 0xff },
- { 0xb9, 0xfc },
- { 0xba, 0x00 },
- { 0xbb, 0x00 },
- { 0xbc, 0x00 },
- { 0xd0, 0x30 },
- { 0xe4, 0x84 },
- { 0xf0, 0x48 },
- { 0xf1, 0x19 },
- { 0xf2, 0x5a },
- { 0xf3, 0x8e },
- { 0xf4, 0x2d },
- { 0xf5, 0x07 },
- { 0xf6, 0x5a },
- { 0xf7, 0xba },
- { 0xf8, 0xd7 },
- };
- static struct regdata s921_prefreq[] = {
- { 0x47, 0x60 },
- { 0x68, 0x00 },
- { 0x69, 0x89 },
- { 0xf0, 0x48 },
- { 0xf1, 0x19 },
- };
- static struct regdata s921_postfreq[] = {
- { 0xf5, 0xae },
- { 0xf6, 0xb7 },
- { 0xf7, 0xba },
- { 0xf8, 0xd7 },
- { 0x68, 0x0a },
- { 0x69, 0x09 },
- };
- static int s921_i2c_writereg(struct s921_state *state,
- u8 i2c_addr, int reg, int data)
- {
- u8 buf[] = { reg, data };
- struct i2c_msg msg = {
- .addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
- };
- int rc;
- rc = i2c_transfer(state->i2c, &msg, 1);
- if (rc != 1) {
- printk("%s: writereg rcor(rc == %i, reg == 0x%02x, data == 0x%02x)\n",
- __func__, rc, reg, data);
- return rc;
- }
- return 0;
- }
- static int s921_i2c_writeregdata(struct s921_state *state, u8 i2c_addr,
- struct regdata *rd, int size)
- {
- int i, rc;
- for (i = 0; i < size; i++) {
- rc = s921_i2c_writereg(state, i2c_addr, rd[i].reg, rd[i].data);
- if (rc < 0)
- return rc;
- }
- return 0;
- }
- static int s921_i2c_readreg(struct s921_state *state, u8 i2c_addr, u8 reg)
- {
- u8 val;
- int rc;
- struct i2c_msg msg[] = {
- { .addr = i2c_addr, .flags = 0, .buf = ®, .len = 1 },
- { .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
- };
- rc = i2c_transfer(state->i2c, msg, 2);
- if (rc != 2) {
- rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc);
- return rc;
- }
- return val;
- }
- #define s921_readreg(state, reg) \
- s921_i2c_readreg(state, state->config->demod_address, reg)
- #define s921_writereg(state, reg, val) \
- s921_i2c_writereg(state, state->config->demod_address, reg, val)
- #define s921_writeregdata(state, regdata) \
- s921_i2c_writeregdata(state, state->config->demod_address, \
- regdata, ARRAY_SIZE(regdata))
- static int s921_pll_tune(struct dvb_frontend *fe)
- {
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
- struct s921_state *state = fe->demodulator_priv;
- int band, rc, i;
- unsigned long f_offset;
- u8 f_switch;
- u64 offset;
- dprintk("frequency=%i\n", p->frequency);
- for (band = 0; band < ARRAY_SIZE(s921_bandselect); band++)
- if (p->frequency < s921_bandselect[band].freq_low)
- break;
- band--;
- if (band < 0) {
- rc("%s: frequency out of range\n", __func__);
- return -EINVAL;
- }
- f_switch = s921_bandselect[band].band_reg;
- offset = ((u64)p->frequency) * 258;
- do_div(offset, 6000000);
- f_offset = ((unsigned long)offset) + 2321;
- rc = s921_writeregdata(state, s921_prefreq);
- if (rc < 0)
- return rc;
- rc = s921_writereg(state, 0xf2, (f_offset >> 8) & 0xff);
- if (rc < 0)
- return rc;
- rc = s921_writereg(state, 0xf3, f_offset & 0xff);
- if (rc < 0)
- return rc;
- rc = s921_writereg(state, 0xf4, f_switch);
- if (rc < 0)
- return rc;
- rc = s921_writeregdata(state, s921_postfreq);
- if (rc < 0)
- return rc;
- for (i = 0 ; i < 6; i++) {
- rc = s921_readreg(state, 0x80);
- dprintk("status 0x80: %02x\n", rc);
- }
- rc = s921_writereg(state, 0x01, 0x40);
- if (rc < 0)
- return rc;
- rc = s921_readreg(state, 0x01);
- dprintk("status 0x01: %02x\n", rc);
- rc = s921_readreg(state, 0x80);
- dprintk("status 0x80: %02x\n", rc);
- rc = s921_readreg(state, 0x80);
- dprintk("status 0x80: %02x\n", rc);
- rc = s921_readreg(state, 0x32);
- dprintk("status 0x32: %02x\n", rc);
- dprintk("pll tune band=%d, pll=%d\n", f_switch, (int)f_offset);
- return 0;
- }
- static int s921_initfe(struct dvb_frontend *fe)
- {
- struct s921_state *state = fe->demodulator_priv;
- int rc;
- dprintk("\n");
- rc = s921_writeregdata(state, s921_init);
- if (rc < 0)
- return rc;
- return 0;
- }
- static int s921_read_status(struct dvb_frontend *fe, enum fe_status *status)
- {
- struct s921_state *state = fe->demodulator_priv;
- int regstatus, rc;
- *status = 0;
- rc = s921_readreg(state, 0x81);
- if (rc < 0)
- return rc;
- regstatus = rc << 8;
- rc = s921_readreg(state, 0x82);
- if (rc < 0)
- return rc;
- regstatus |= rc;
- dprintk("status = %04x\n", regstatus);
- /* Full Sync - We don't know what each bit means on regs 0x81/0x82 */
- if ((regstatus & 0xff) == 0x40) {
- *status = FE_HAS_SIGNAL |
- FE_HAS_CARRIER |
- FE_HAS_VITERBI |
- FE_HAS_SYNC |
- FE_HAS_LOCK;
- } else if (regstatus & 0x40) {
- /* This is close to Full Sync, but not enough to get useful info */
- *status = FE_HAS_SIGNAL |
- FE_HAS_CARRIER |
- FE_HAS_VITERBI |
- FE_HAS_SYNC;
- }
- return 0;
- }
- static int s921_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
- {
- enum fe_status status;
- struct s921_state *state = fe->demodulator_priv;
- int rc;
- /* FIXME: Use the proper register for it... 0x80? */
- rc = s921_read_status(fe, &status);
- if (rc < 0)
- return rc;
- *strength = (status & FE_HAS_LOCK) ? 0xffff : 0;
- dprintk("strength = 0x%04x\n", *strength);
- rc = s921_readreg(state, 0x01);
- dprintk("status 0x01: %02x\n", rc);
- rc = s921_readreg(state, 0x80);
- dprintk("status 0x80: %02x\n", rc);
- rc = s921_readreg(state, 0x32);
- dprintk("status 0x32: %02x\n", rc);
- return 0;
- }
- static int s921_set_frontend(struct dvb_frontend *fe)
- {
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
- struct s921_state *state = fe->demodulator_priv;
- int rc;
- dprintk("\n");
- /* FIXME: We don't know how to use non-auto mode */
- rc = s921_pll_tune(fe);
- if (rc < 0)
- return rc;
- state->currentfreq = p->frequency;
- return 0;
- }
- static int s921_get_frontend(struct dvb_frontend *fe,
- struct dtv_frontend_properties *p)
- {
- struct s921_state *state = fe->demodulator_priv;
- /* FIXME: Probably it is possible to get it from regs f1 and f2 */
- p->frequency = state->currentfreq;
- p->delivery_system = SYS_ISDBT;
- return 0;
- }
- static int s921_tune(struct dvb_frontend *fe,
- bool re_tune,
- unsigned int mode_flags,
- unsigned int *delay,
- enum fe_status *status)
- {
- int rc = 0;
- dprintk("\n");
- if (re_tune)
- rc = s921_set_frontend(fe);
- if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
- s921_read_status(fe, status);
- return rc;
- }
- static enum dvbfe_algo s921_get_algo(struct dvb_frontend *fe)
- {
- return DVBFE_ALGO_HW;
- }
- static void s921_release(struct dvb_frontend *fe)
- {
- struct s921_state *state = fe->demodulator_priv;
- dprintk("\n");
- kfree(state);
- }
- static const struct dvb_frontend_ops s921_ops;
- struct dvb_frontend *s921_attach(const struct s921_config *config,
- struct i2c_adapter *i2c)
- {
- /* allocate memory for the internal state */
- struct s921_state *state =
- kzalloc(sizeof(struct s921_state), GFP_KERNEL);
- dprintk("\n");
- if (!state) {
- rc("Unable to kzalloc\n");
- return NULL;
- }
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- /* create dvb_frontend */
- memcpy(&state->frontend.ops, &s921_ops,
- sizeof(struct dvb_frontend_ops));
- state->frontend.demodulator_priv = state;
- return &state->frontend;
- }
- EXPORT_SYMBOL(s921_attach);
- static const struct dvb_frontend_ops s921_ops = {
- .delsys = { SYS_ISDBT },
- /* Use dib8000 values per default */
- .info = {
- .name = "Sharp S921",
- .frequency_min_hz = 470 * MHz,
- /*
- * Max should be 770MHz instead, according with Sharp docs,
- * but Leadership doc says it works up to 806 MHz. This is
- * required to get channel 69, used in Brazil
- */
- .frequency_max_hz = 806 * MHz,
- .caps = FE_CAN_INVERSION_AUTO |
- FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
- FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
- FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
- FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
- FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER |
- FE_CAN_HIERARCHY_AUTO,
- },
- .release = s921_release,
- .init = s921_initfe,
- .set_frontend = s921_set_frontend,
- .get_frontend = s921_get_frontend,
- .read_status = s921_read_status,
- .read_signal_strength = s921_read_signal_strength,
- .tune = s921_tune,
- .get_frontend_algo = s921_get_algo,
- };
- MODULE_DESCRIPTION("DVB Frontend module for Sharp S921 hardware");
- MODULE_AUTHOR("Mauro Carvalho Chehab");
- MODULE_AUTHOR("Douglas Landgraf <dougsland@redhat.com>");
- MODULE_LICENSE("GPL");
|