debug.c 6.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176
  1. // SPDX-License-Identifier: GPL-2.0+
  2. /*
  3. * Driver for USB Mass Storage compliant devices
  4. * Debugging Functions Source Code File
  5. *
  6. * Current development and maintenance by:
  7. * (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
  8. *
  9. * Developed with the assistance of:
  10. * (c) 2002 Alan Stern <stern@rowland.org>
  11. *
  12. * Initial work by:
  13. * (c) 1999 Michael Gee (michael@linuxspecific.com)
  14. *
  15. * This driver is based on the 'USB Mass Storage Class' document. This
  16. * describes in detail the protocol used to communicate with such
  17. * devices. Clearly, the designers had SCSI and ATAPI commands in
  18. * mind when they created this document. The commands are all very
  19. * similar to commands in the SCSI-II and ATAPI specifications.
  20. *
  21. * It is important to note that in a number of cases this class
  22. * exhibits class-specific exemptions from the USB specification.
  23. * Notably the usage of NAK, STALL and ACK differs from the norm, in
  24. * that they are used to communicate wait, failed and OK on commands.
  25. *
  26. * Also, for certain devices, the interrupt endpoint is used to convey
  27. * status of a command.
  28. */
  29. #include <linux/device.h>
  30. #include <linux/cdrom.h>
  31. #include <linux/export.h>
  32. #include <scsi/scsi.h>
  33. #include <scsi/scsi_cmnd.h>
  34. #include <scsi/scsi_dbg.h>
  35. #include "usb.h"
  36. #include "debug.h"
  37. #include "scsi.h"
  38. void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb)
  39. {
  40. char *what = NULL;
  41. switch (srb->cmnd[0]) {
  42. case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break;
  43. case REZERO_UNIT: what = "REZERO_UNIT"; break;
  44. case REQUEST_SENSE: what = "REQUEST_SENSE"; break;
  45. case FORMAT_UNIT: what = "FORMAT_UNIT"; break;
  46. case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break;
  47. case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break;
  48. case READ_6: what = "READ_6"; break;
  49. case WRITE_6: what = "WRITE_6"; break;
  50. case SEEK_6: what = "SEEK_6"; break;
  51. case READ_REVERSE: what = "READ_REVERSE"; break;
  52. case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break;
  53. case SPACE: what = "SPACE"; break;
  54. case INQUIRY: what = "INQUIRY"; break;
  55. case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break;
  56. case MODE_SELECT: what = "MODE_SELECT"; break;
  57. case RESERVE: what = "RESERVE"; break;
  58. case RELEASE: what = "RELEASE"; break;
  59. case COPY: what = "COPY"; break;
  60. case ERASE: what = "ERASE"; break;
  61. case MODE_SENSE: what = "MODE_SENSE"; break;
  62. case START_STOP: what = "START_STOP"; break;
  63. case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break;
  64. case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break;
  65. case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break;
  66. case SET_WINDOW: what = "SET_WINDOW"; break;
  67. case READ_CAPACITY: what = "READ_CAPACITY"; break;
  68. case READ_10: what = "READ_10"; break;
  69. case WRITE_10: what = "WRITE_10"; break;
  70. case SEEK_10: what = "SEEK_10"; break;
  71. case WRITE_VERIFY: what = "WRITE_VERIFY"; break;
  72. case VERIFY: what = "VERIFY"; break;
  73. case SEARCH_HIGH: what = "SEARCH_HIGH"; break;
  74. case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break;
  75. case SEARCH_LOW: what = "SEARCH_LOW"; break;
  76. case SET_LIMITS: what = "SET_LIMITS"; break;
  77. case READ_POSITION: what = "READ_POSITION"; break;
  78. case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break;
  79. case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break;
  80. case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break;
  81. case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break;
  82. case COMPARE: what = "COMPARE"; break;
  83. case COPY_VERIFY: what = "COPY_VERIFY"; break;
  84. case WRITE_BUFFER: what = "WRITE_BUFFER"; break;
  85. case READ_BUFFER: what = "READ_BUFFER"; break;
  86. case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break;
  87. case READ_LONG: what = "READ_LONG"; break;
  88. case WRITE_LONG: what = "WRITE_LONG"; break;
  89. case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break;
  90. case WRITE_SAME: what = "WRITE_SAME"; break;
  91. case GPCMD_READ_SUBCHANNEL: what = "READ SUBCHANNEL"; break;
  92. case READ_TOC: what = "READ_TOC"; break;
  93. case GPCMD_READ_HEADER: what = "READ HEADER"; break;
  94. case GPCMD_PLAY_AUDIO_10: what = "PLAY AUDIO (10)"; break;
  95. case GPCMD_PLAY_AUDIO_MSF: what = "PLAY AUDIO MSF"; break;
  96. case GPCMD_GET_EVENT_STATUS_NOTIFICATION:
  97. what = "GET EVENT/STATUS NOTIFICATION"; break;
  98. case GPCMD_PAUSE_RESUME: what = "PAUSE/RESUME"; break;
  99. case LOG_SELECT: what = "LOG_SELECT"; break;
  100. case LOG_SENSE: what = "LOG_SENSE"; break;
  101. case GPCMD_STOP_PLAY_SCAN: what = "STOP PLAY/SCAN"; break;
  102. case GPCMD_READ_DISC_INFO: what = "READ DISC INFORMATION"; break;
  103. case GPCMD_READ_TRACK_RZONE_INFO:
  104. what = "READ TRACK INFORMATION"; break;
  105. case GPCMD_RESERVE_RZONE_TRACK: what = "RESERVE TRACK"; break;
  106. case GPCMD_SEND_OPC: what = "SEND OPC"; break;
  107. case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
  108. case GPCMD_REPAIR_RZONE_TRACK: what = "REPAIR TRACK"; break;
  109. case 0x59: what = "READ MASTER CUE"; break;
  110. case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
  111. case GPCMD_CLOSE_TRACK: what = "CLOSE TRACK/SESSION"; break;
  112. case 0x5C: what = "READ BUFFER CAPACITY"; break;
  113. case 0x5D: what = "SEND CUE SHEET"; break;
  114. case GPCMD_BLANK: what = "BLANK"; break;
  115. case REPORT_LUNS: what = "REPORT LUNS"; break;
  116. case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break;
  117. case READ_12: what = "READ_12"; break;
  118. case WRITE_12: what = "WRITE_12"; break;
  119. case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
  120. case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
  121. case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
  122. case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
  123. case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
  124. case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
  125. case GPCMD_READ_CD_MSF: what = "READ CD MSF"; break;
  126. case GPCMD_SCAN: what = "SCAN"; break;
  127. case GPCMD_SET_SPEED: what = "SET CD SPEED"; break;
  128. case GPCMD_MECHANISM_STATUS: what = "MECHANISM STATUS"; break;
  129. case GPCMD_READ_CD: what = "READ CD"; break;
  130. case 0xE1: what = "WRITE CONTINUE"; break;
  131. case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
  132. default: what = "(unknown command)"; break;
  133. }
  134. usb_stor_dbg(us, "Command %s (%d bytes)\n", what, srb->cmd_len);
  135. usb_stor_dbg(us, "bytes: %*ph\n", min_t(int, srb->cmd_len, 16),
  136. (const unsigned char *)srb->cmnd);
  137. }
  138. void usb_stor_show_sense(const struct us_data *us,
  139. unsigned char key,
  140. unsigned char asc,
  141. unsigned char ascq)
  142. {
  143. const char *what, *keystr, *fmt;
  144. keystr = scsi_sense_key_string(key);
  145. what = scsi_extd_sense_format(asc, ascq, &fmt);
  146. if (keystr == NULL)
  147. keystr = "(Unknown Key)";
  148. if (what == NULL)
  149. what = "(unknown ASC/ASCQ)";
  150. if (fmt)
  151. usb_stor_dbg(us, "%s: %s (%s%x)\n", keystr, what, fmt, ascq);
  152. else
  153. usb_stor_dbg(us, "%s: %s\n", keystr, what);
  154. }
  155. void usb_stor_dbg(const struct us_data *us, const char *fmt, ...)
  156. {
  157. va_list args;
  158. va_start(args, fmt);
  159. dev_vprintk_emit(LOGLEVEL_DEBUG, &us->pusb_dev->dev, fmt, args);
  160. va_end(args);
  161. }
  162. EXPORT_SYMBOL_GPL(usb_stor_dbg);