123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247 |
- // SPDX-License-Identifier: GPL-2.0
- /* (C) 2015 Pengutronix, Alexander Aring <aar@pengutronix.de>
- *
- * Authors:
- * Alexander Aring <aar@pengutronix.de>
- * Eric Anholt <eric@anholt.net>
- */
- #include <linux/module.h>
- #include <linux/of_platform.h>
- #include <linux/platform_device.h>
- #include <linux/pm_domain.h>
- #include <dt-bindings/power/raspberrypi-power.h>
- #include <soc/bcm2835/raspberrypi-firmware.h>
- /*
- * Firmware indices for the old power domains interface. Only a few
- * of them were actually implemented.
- */
- #define RPI_OLD_POWER_DOMAIN_USB 3
- #define RPI_OLD_POWER_DOMAIN_V3D 10
- struct rpi_power_domain {
- u32 domain;
- bool enabled;
- bool old_interface;
- struct generic_pm_domain base;
- struct rpi_firmware *fw;
- };
- struct rpi_power_domains {
- bool has_new_interface;
- struct genpd_onecell_data xlate;
- struct rpi_firmware *fw;
- struct rpi_power_domain domains[RPI_POWER_DOMAIN_COUNT];
- };
- /*
- * Packet definition used by RPI_FIRMWARE_SET_POWER_STATE and
- * RPI_FIRMWARE_SET_DOMAIN_STATE
- */
- struct rpi_power_domain_packet {
- u32 domain;
- u32 on;
- };
- /*
- * Asks the firmware to enable or disable power on a specific power
- * domain.
- */
- static int rpi_firmware_set_power(struct rpi_power_domain *rpi_domain, bool on)
- {
- struct rpi_power_domain_packet packet;
- packet.domain = rpi_domain->domain;
- packet.on = on;
- return rpi_firmware_property(rpi_domain->fw,
- rpi_domain->old_interface ?
- RPI_FIRMWARE_SET_POWER_STATE :
- RPI_FIRMWARE_SET_DOMAIN_STATE,
- &packet, sizeof(packet));
- }
- static int rpi_domain_off(struct generic_pm_domain *domain)
- {
- struct rpi_power_domain *rpi_domain =
- container_of(domain, struct rpi_power_domain, base);
- return rpi_firmware_set_power(rpi_domain, false);
- }
- static int rpi_domain_on(struct generic_pm_domain *domain)
- {
- struct rpi_power_domain *rpi_domain =
- container_of(domain, struct rpi_power_domain, base);
- return rpi_firmware_set_power(rpi_domain, true);
- }
- static void rpi_common_init_power_domain(struct rpi_power_domains *rpi_domains,
- int xlate_index, const char *name)
- {
- struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
- dom->fw = rpi_domains->fw;
- dom->base.name = name;
- dom->base.power_on = rpi_domain_on;
- dom->base.power_off = rpi_domain_off;
- /*
- * Treat all power domains as off at boot.
- *
- * The firmware itself may be keeping some domains on, but
- * from Linux's perspective all we control is the refcounts
- * that we give to the firmware, and we can't ask the firmware
- * to turn off something that we haven't ourselves turned on.
- */
- pm_genpd_init(&dom->base, NULL, true);
- rpi_domains->xlate.domains[xlate_index] = &dom->base;
- }
- static void rpi_init_power_domain(struct rpi_power_domains *rpi_domains,
- int xlate_index, const char *name)
- {
- struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
- if (!rpi_domains->has_new_interface)
- return;
- /* The DT binding index is the firmware's domain index minus one. */
- dom->domain = xlate_index + 1;
- rpi_common_init_power_domain(rpi_domains, xlate_index, name);
- }
- static void rpi_init_old_power_domain(struct rpi_power_domains *rpi_domains,
- int xlate_index, int domain,
- const char *name)
- {
- struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
- dom->old_interface = true;
- dom->domain = domain;
- rpi_common_init_power_domain(rpi_domains, xlate_index, name);
- }
- /*
- * Detects whether the firmware supports the new power domains interface.
- *
- * The firmware doesn't actually return an error on an unknown tag,
- * and just skips over it, so we do the detection by putting an
- * unexpected value in the return field and checking if it was
- * unchanged.
- */
- static bool
- rpi_has_new_domain_support(struct rpi_power_domains *rpi_domains)
- {
- struct rpi_power_domain_packet packet;
- int ret;
- packet.domain = RPI_POWER_DOMAIN_ARM;
- packet.on = ~0;
- ret = rpi_firmware_property(rpi_domains->fw,
- RPI_FIRMWARE_GET_DOMAIN_STATE,
- &packet, sizeof(packet));
- return ret == 0 && packet.on != ~0;
- }
- static int rpi_power_probe(struct platform_device *pdev)
- {
- struct device_node *fw_np;
- struct device *dev = &pdev->dev;
- struct rpi_power_domains *rpi_domains;
- rpi_domains = devm_kzalloc(dev, sizeof(*rpi_domains), GFP_KERNEL);
- if (!rpi_domains)
- return -ENOMEM;
- rpi_domains->xlate.domains =
- devm_kcalloc(dev,
- RPI_POWER_DOMAIN_COUNT,
- sizeof(*rpi_domains->xlate.domains),
- GFP_KERNEL);
- if (!rpi_domains->xlate.domains)
- return -ENOMEM;
- rpi_domains->xlate.num_domains = RPI_POWER_DOMAIN_COUNT;
- fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0);
- if (!fw_np) {
- dev_err(&pdev->dev, "no firmware node\n");
- return -ENODEV;
- }
- rpi_domains->fw = rpi_firmware_get(fw_np);
- of_node_put(fw_np);
- if (!rpi_domains->fw)
- return -EPROBE_DEFER;
- rpi_domains->has_new_interface =
- rpi_has_new_domain_support(rpi_domains);
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C0, "I2C0");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C1, "I2C1");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C2, "I2C2");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VIDEO_SCALER,
- "VIDEO_SCALER");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VPU1, "VPU1");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_HDMI, "HDMI");
- /*
- * Use the old firmware interface for USB power, so that we
- * can turn it on even if the firmware hasn't been updated.
- */
- rpi_init_old_power_domain(rpi_domains, RPI_POWER_DOMAIN_USB,
- RPI_OLD_POWER_DOMAIN_USB, "USB");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VEC, "VEC");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_JPEG, "JPEG");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_H264, "H264");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_V3D, "V3D");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ISP, "ISP");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM0, "UNICAM0");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM1, "UNICAM1");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2RX, "CCP2RX");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CSI2, "CSI2");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CPI, "CPI");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI0, "DSI0");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI1, "DSI1");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_TRANSPOSER,
- "TRANSPOSER");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2TX, "CCP2TX");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CDP, "CDP");
- rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ARM, "ARM");
- of_genpd_add_provider_onecell(dev->of_node, &rpi_domains->xlate);
- platform_set_drvdata(pdev, rpi_domains);
- return 0;
- }
- static const struct of_device_id rpi_power_of_match[] = {
- { .compatible = "raspberrypi,bcm2835-power", },
- {},
- };
- MODULE_DEVICE_TABLE(of, rpi_power_of_match);
- static struct platform_driver rpi_power_driver = {
- .driver = {
- .name = "raspberrypi-power",
- .of_match_table = rpi_power_of_match,
- },
- .probe = rpi_power_probe,
- };
- builtin_platform_driver(rpi_power_driver);
- MODULE_AUTHOR("Alexander Aring <aar@pengutronix.de>");
- MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
- MODULE_DESCRIPTION("Raspberry Pi power domain driver");
- MODULE_LICENSE("GPL v2");
|