123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104 |
- // SPDX-License-Identifier: GPL-2.0+
- /*
- * Driver for the Renesas PHY uPD60620.
- *
- * Copyright (C) 2015 Softing Industrial Automation GmbH
- */
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/phy.h>
- #define UPD60620_PHY_ID 0xb8242824
- /* Extended Registers and values */
- /* PHY Special Control/Status */
- #define PHY_PHYSCR 0x1F /* PHY.31 */
- #define PHY_PHYSCR_10MB 0x0004 /* PHY speed = 10mb */
- #define PHY_PHYSCR_100MB 0x0008 /* PHY speed = 100mb */
- #define PHY_PHYSCR_DUPLEX 0x0010 /* PHY Duplex */
- /* PHY Special Modes */
- #define PHY_SPM 0x12 /* PHY.18 */
- /* Init PHY */
- static int upd60620_config_init(struct phy_device *phydev)
- {
- /* Enable support for passive HUBs (could be a strap option) */
- /* PHYMODE: All speeds, HD in parallel detect */
- return phy_write(phydev, PHY_SPM, 0x0180 | phydev->mdio.addr);
- }
- /* Get PHY status from common registers */
- static int upd60620_read_status(struct phy_device *phydev)
- {
- int phy_state;
- /* Read negotiated state */
- phy_state = phy_read(phydev, MII_BMSR);
- if (phy_state < 0)
- return phy_state;
- phydev->link = 0;
- linkmode_zero(phydev->lp_advertising);
- phydev->pause = 0;
- phydev->asym_pause = 0;
- if (phy_state & (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) {
- phy_state = phy_read(phydev, PHY_PHYSCR);
- if (phy_state < 0)
- return phy_state;
- if (phy_state & (PHY_PHYSCR_10MB | PHY_PHYSCR_100MB)) {
- phydev->link = 1;
- phydev->speed = SPEED_10;
- phydev->duplex = DUPLEX_HALF;
- if (phy_state & PHY_PHYSCR_100MB)
- phydev->speed = SPEED_100;
- if (phy_state & PHY_PHYSCR_DUPLEX)
- phydev->duplex = DUPLEX_FULL;
- phy_state = phy_read(phydev, MII_LPA);
- if (phy_state < 0)
- return phy_state;
- mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising,
- phy_state);
- if (phydev->duplex == DUPLEX_FULL) {
- if (phy_state & LPA_PAUSE_CAP)
- phydev->pause = 1;
- if (phy_state & LPA_PAUSE_ASYM)
- phydev->asym_pause = 1;
- }
- }
- }
- return 0;
- }
- MODULE_DESCRIPTION("Renesas uPD60620 PHY driver");
- MODULE_AUTHOR("Bernd Edlinger <bernd.edlinger@hotmail.de>");
- MODULE_LICENSE("GPL");
- static struct phy_driver upd60620_driver[1] = { {
- .phy_id = UPD60620_PHY_ID,
- .phy_id_mask = 0xfffffffe,
- .name = "Renesas uPD60620",
- /* PHY_BASIC_FEATURES */
- .flags = 0,
- .config_init = upd60620_config_init,
- .read_status = upd60620_read_status,
- } };
- module_phy_driver(upd60620_driver);
- static struct mdio_device_id __maybe_unused upd60620_tbl[] = {
- { UPD60620_PHY_ID, 0xfffffffe },
- { }
- };
- MODULE_DEVICE_TABLE(mdio, upd60620_tbl);
|