123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119 |
- // SPDX-License-Identifier: GPL-2.0-or-later
- /*
- * omap-ocp2scp.c - transform ocp interface protocol to scp protocol
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
- * Author: Kishon Vijay Abraham I <kishon@ti.com>
- */
- #include <linux/io.h>
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/err.h>
- #include <linux/pm_runtime.h>
- #include <linux/of.h>
- #include <linux/of_platform.h>
- #define OCP2SCP_TIMING 0x18
- #define SYNC2_MASK 0xf
- static int ocp2scp_remove_devices(struct device *dev, void *c)
- {
- struct platform_device *pdev = to_platform_device(dev);
- platform_device_unregister(pdev);
- return 0;
- }
- static int omap_ocp2scp_probe(struct platform_device *pdev)
- {
- int ret;
- u32 reg;
- void __iomem *regs;
- struct resource *res;
- struct device_node *np = pdev->dev.of_node;
- if (np) {
- ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
- if (ret) {
- dev_err(&pdev->dev,
- "failed to add resources for ocp2scp child\n");
- goto err0;
- }
- }
- pm_runtime_enable(&pdev->dev);
- /*
- * As per AM572x TRM: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf
- * under section 26.3.2.2, table 26-26 OCP2SCP TIMING Caution;
- * As per OMAP4430 TRM: http://www.ti.com/lit/ug/swpu231ap/swpu231ap.pdf
- * under section 23.12.6.2.2 , Table 23-1213 OCP2SCP TIMING Caution;
- * As per OMAP4460 TRM: http://www.ti.com/lit/ug/swpu235ab/swpu235ab.pdf
- * under section 23.12.6.2.2, Table 23-1213 OCP2SCP TIMING Caution;
- * As per OMAP543x TRM http://www.ti.com/lit/pdf/swpu249
- * under section 27.3.2.2, Table 27-27 OCP2SCP TIMING Caution;
- *
- * Read path of OCP2SCP is not working properly due to low reset value
- * of SYNC2 parameter in OCP2SCP. Suggested reset value is 0x6 or more.
- */
- if (!of_device_is_compatible(np, "ti,am437x-ocp2scp")) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(regs)) {
- ret = PTR_ERR(regs);
- goto err1;
- }
- pm_runtime_get_sync(&pdev->dev);
- reg = readl_relaxed(regs + OCP2SCP_TIMING);
- reg &= ~(SYNC2_MASK);
- reg |= 0x6;
- writel_relaxed(reg, regs + OCP2SCP_TIMING);
- pm_runtime_put_sync(&pdev->dev);
- }
- return 0;
- err1:
- pm_runtime_disable(&pdev->dev);
- err0:
- device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
- return ret;
- }
- static int omap_ocp2scp_remove(struct platform_device *pdev)
- {
- pm_runtime_disable(&pdev->dev);
- device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
- return 0;
- }
- #ifdef CONFIG_OF
- static const struct of_device_id omap_ocp2scp_id_table[] = {
- { .compatible = "ti,omap-ocp2scp" },
- { .compatible = "ti,am437x-ocp2scp" },
- {}
- };
- MODULE_DEVICE_TABLE(of, omap_ocp2scp_id_table);
- #endif
- static struct platform_driver omap_ocp2scp_driver = {
- .probe = omap_ocp2scp_probe,
- .remove = omap_ocp2scp_remove,
- .driver = {
- .name = "omap-ocp2scp",
- .of_match_table = of_match_ptr(omap_ocp2scp_id_table),
- },
- };
- module_platform_driver(omap_ocp2scp_driver);
- MODULE_ALIAS("platform:omap-ocp2scp");
- MODULE_AUTHOR("Texas Instruments Inc.");
- MODULE_DESCRIPTION("OMAP OCP2SCP driver");
- MODULE_LICENSE("GPL v2");
|