| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273 |
- ; Global settings for redshift
- [redshift]
- ; Set the day and night screen temperatures
- temp-day=6500
- temp-night=5700
- ; temp-day=5700
- ; temp-night=3500
- ; Disable the smooth fade between temperatures when Redshift starts and stops.
- ; 0 will cause an immediate change between screen temperatures.
- ; 1 will gradually apply the new screen temperature over a couple of seconds.
- fade=1
- ; Solar elevation thresholds.
- ; By default, Redshift will use the current elevation of the sun to determine
- ; whether it is daytime, night or in transition (dawn/dusk). When the sun is
- ; above the degrees specified with elevation-high it is considered daytime and
- ; below elevation-low it is considered night.
- ;elevation-high=3
- ;elevation-low=-6
- ; Custom dawn/dusk intervals.
- ; Instead of using the solar elevation, the time intervals of dawn and dusk
- ; can be specified manually. The times must be specified as HH:MM in 24-hour
- ; format.
- ;dawn-time=6:00-7:45
- ;dusk-time=18:35-20:15
- ; Set the screen brightness. Default is 1.0.
- ;brightness=0.9
- ; It is also possible to use different settings for day and night
- ; since version 1.8.
- ;brightness-day=0.7
- ;brightness-night=0.4
- ; Set the screen gamma (for all colors, or each color channel
- ; individually)
- gamma=0.8
- ;gamma=0.8:0.7:0.8
- ; This can also be set individually for day and night since
- ; version 1.10.
- ;gamma-day=0.8:0.7:0.8
- ;gamma-night=0.6
- ; Set the location-provider: 'geoclue2', 'manual'
- ; type 'redshift -l list' to see possible values.
- ; The location provider settings are in a different section.
- location-provider=manual
- ; Set the adjustment-method: 'randr', 'vidmode'
- ; type 'redshift -m list' to see all possible values.
- ; 'randr' is the preferred method, 'vidmode' is an older API.
- ; but works in some cases when 'randr' does not.
- ; The adjustment method settings are in a different section.
- adjustment-method=randr
- ; Configuration of the location-provider:
- ; type 'redshift -l PROVIDER:help' to see the settings.
- ; ex: 'redshift -l manual:help'
- ; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
- ; are negative numbers.
- [manual]
- lat=52.4345
- lon=30.9754
- ; Configuration of the adjustment-method
- ; type 'redshift -m METHOD:help' to see the settings.
- ; ex: 'redshift -m randr:help'
- ; In this example, randr is configured to adjust only screen 0.
- ; Note that the numbering starts from 0, so this is actually the first screen.
- ; If this option is not specified, Redshift will try to adjust _all_ screens.
- [randr]
- screen=0
|
