123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102 |
- #!/bin/bash
- #
- # build script: builds the ROM images with GRUB payloads and puts them in ./bin/
- #
- # Copyright (C) 2014, 2015 Francis Rowe <info@gluglug.org.uk>
- #
- # This program is free software: you can redistribute it and/or modify
- # it under the terms of the GNU General Public License as published by
- # the Free Software Foundation, either version 3 of the License, or
- # (at your option) any later version.
- #
- # This program is distributed in the hope that it will be useful,
- # but WITHOUT ANY WARRANTY; without even the implied warranty of
- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- # GNU General Public License for more details.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program. If not, see <http://www.gnu.org/licenses/>.
- #
- set -u -e -v
- # Build the ROM's
- # MAKE SURE THAT YOU RAN "buildall" OR "builddeps" *AT LEAST ONCE*
- # BEFORE RUNNING THIS!
- # Put GRUB payloads and config files
- # in the coreboot directory, ready for next step
- cd coreboot/
- for romtype in txtmode vesafb
- do
- cd ../resources/utilities/grub-assemble
- ./gen.sh "$romtype"
- rm -f ../../../coreboot/grub_"$romtype".elf
- mv grub_"$romtype".elf ../../../coreboot/
- cd ../../../coreboot
- # GRUB configuration files
- for keymap in $(ls ../resources/utilities/grub-assemble/keymap/original)
- do
- cat ../resources/grub/config/extra/common.cfg > grub_"$keymap"_"$romtype".cfg
- cat ../resources/grub/config/extra/"$romtype".cfg >> grub_"$keymap"_"$romtype".cfg
- echo "keymap $keymap" >> grub_"$keymap"_"$romtype".cfg
- cat ../resources/grub/config/menuentries/common.cfg >> grub_"$keymap"_"$romtype".cfg
- cat ../resources/grub/config/menuentries/"$romtype".cfg >> grub_"$keymap"_"$romtype".cfg
- # grubtest.cfg should be able to switch back to grub.cfg
- sed 's/grubtest.cfg/grub.cfg/' < grub_"$keymap"_"$romtype".cfg > grub_"$keymap"_"$romtype"_test.cfg
- done
- done
- cd ../
- # Build ROM images for supported boards
- for board in $(ls resources/libreboot/config/)
- do
- ./buildrom-withgrub $board
- done
- # Needed on i945 systems for the bucts/dd trick (documented)
- # This enables the ROM to be flashed over the lenovo bios firmware
- for i945board in x60 t60
- do
- cd bin/"$i945board"/
- for i945rom in $(ls)
- do
- dd if="$i945rom" of=top64k.bin bs=1 skip=$[$(stat -c %s "$i945rom") - 0x10000] count=64k
- dd if=top64k.bin of="$i945rom" bs=1 seek=$[$(stat -c %s "$i945rom") - 0x20000] count=64k conv=notrunc
- rm -f top64k.bin
- done
- cd ../../
- done
- # Build the deblobbed descriptor+gbe regions for GM45/ICH9M targets.
- # Then put them in the ROM images.
- cd bin/
- ../resources/utilities/ich9deblob/ich9gen
- for board in "x200"
- do
- for romsize in "4m" "8m"
- do
- cd "$board"_"$romsize"b/
- for rom in $(ls)
- do
- dd if=../ich9fdgbe_"$romsize".bin of="$rom" bs=1 count=12k conv=notrunc
- done
- cd ../
- done
- done
- rm -f ich9fdgbe_4m.bin
- rm -f ich9fdgbe_8m.bin
- cd ../
- # The GRUB payloads are no longer needed
- rm -f coreboot/grub_vesafb.elf
- rm -f coreboot/grub_txtmode.elf
- # The GRUB configs are no longer needed
- rm -f coreboot/grub*cfg
- # ------------------- DONE ----------------------
|