buttox/arch/powerpc/boot/dts/fsl/b4860qds.dts

/*
 * B4860DS Device Tree Source
 *
 * Copyright 2012 - 2015 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/include/ "b4860si-pre.dtsi"
/include/ "b4qds.dtsi"

/ {
	model = "fsl,B4860QDS";
	compatible = "fsl,B4860QDS";

	aliases {
		phy_sgmii_1e = &phy_sgmii_1e;
		phy_sgmii_1f = &phy_sgmii_1f;
		phy_xaui_slot1 = &phy_xaui_slot1;
		phy_xaui_slot2 = &phy_xaui_slot2;
	};

	ifc: localbus@ffe124000 {
		board-control@3,0 {
			compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis";
		};
	};

	soc@ffe000000 {
		fman@400000 {
			ethernet@e8000 {
				phy-handle = <&phy_sgmii_1e>;
				phy-connection-type = "sgmii";
			};

			ethernet@ea000 {
				phy-handle = <&phy_sgmii_1f>;
				phy-connection-type = "sgmii";
			};

			ethernet@f0000 {
				phy-handle = <&phy_xaui_slot1>;
				phy-connection-type = "xgmii";
			};

			ethernet@f2000 {
				phy-handle = <&phy_xaui_slot2>;
				phy-connection-type = "xgmii";
			};

			mdio@fc000 {
				phy_sgmii_1e: ethernet-phy@1e {
					reg = <0x1e>;
					status = "disabled";
				};

				phy_sgmii_1f: ethernet-phy@1f {
					reg = <0x1f>;
					status = "disabled";
				};
			};

			mdio@fd000 {
				phy_xaui_slot1: xaui-phy@slot1 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x7>;
					status = "disabled";
				};

				phy_xaui_slot2: xaui-phy@slot2 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x6>;
					status = "disabled";
				};
			};
		};
	};

	rio: rapidio@ffe0c0000 {
		reg = <0xf 0xfe0c0000 0 0x11000>;

		port1 {
			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
		};
		port2 {
			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
		};
	};
};

/include/ "b4860si-post.dtsi"