12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561256225632564256525662567256825692570257125722573257425752576257725782579258025812582258325842585258625872588258925902591259225932594259525962597259825992600260126022603260426052606260726082609261026112612261326142615261626172618261926202621262226232624262526262627262826292630263126322633263426352636263726382639264026412642264326442645264626472648264926502651265226532654265526562657265826592660266126622663266426652666266726682669267026712672267326742675267626772678267926802681268226832684268526862687268826892690269126922693269426952696269726982699270027012702270327042705270627072708270927102711271227132714271527162717271827192720272127222723272427252726272727282729273027312732273327342735273627372738273927402741274227432744274527462747274827492750275127522753275427552756275727582759276027612762276327642765276627672768276927702771277227732774277527762777277827792780278127822783278427852786278727882789279027912792279327942795279627972798279928002801280228032804280528062807280828092810281128122813281428152816281728182819282028212822282328242825282628272828282928302831283228332834283528362837283828392840284128422843284428452846284728482849285028512852285328542855285628572858285928602861286228632864286528662867286828692870287128722873287428752876287728782879288028812882288328842885288628872888288928902891289228932894289528962897289828992900290129022903290429052906290729082909291029112912291329142915291629172918291929202921292229232924292529262927292829292930293129322933293429352936293729382939294029412942294329442945294629472948294929502951295229532954295529562957295829592960296129622963296429652966296729682969297029712972297329742975297629772978297929802981298229832984298529862987298829892990299129922993299429952996299729982999300030013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050305130523053305430553056305730583059306030613062306330643065306630673068306930703071307230733074307530763077307830793080308130823083308430853086308730883089309030913092309330943095309630973098309931003101310231033104310531063107310831093110311131123113311431153116311731183119312031213122312331243125312631273128312931303131313231333134313531363137313831393140314131423143314431453146314731483149315031513152315331543155315631573158315931603161316231633164316531663167316831693170317131723173317431753176317731783179318031813182318331843185318631873188318931903191319231933194319531963197319831993200320132023203320432053206320732083209321032113212321332143215321632173218321932203221322232233224322532263227322832293230323132323233323432353236323732383239324032413242324332443245324632473248324932503251325232533254325532563257325832593260326132623263326432653266326732683269327032713272327332743275327632773278327932803281328232833284328532863287328832893290329132923293329432953296329732983299330033013302330333043305330633073308330933103311331233133314331533163317331833193320332133223323332433253326332733283329333033313332333333343335333633373338333933403341334233433344334533463347334833493350335133523353335433553356335733583359336033613362336333643365336633673368336933703371337233733374337533763377337833793380338133823383338433853386338733883389339033913392339333943395339633973398339934003401340234033404340534063407340834093410341134123413341434153416341734183419342034213422342334243425342634273428342934303431343234333434343534363437343834393440344134423443344434453446344734483449345034513452345334543455345634573458345934603461346234633464346534663467346834693470347134723473347434753476347734783479348034813482348334843485348634873488348934903491349234933494349534963497349834993500350135023503350435053506350735083509351035113512351335143515351635173518351935203521352235233524352535263527352835293530353135323533353435353536353735383539354035413542354335443545354635473548354935503551355235533554355535563557355835593560356135623563356435653566356735683569357035713572357335743575357635773578357935803581358235833584358535863587358835893590359135923593359435953596359735983599360036013602360336043605360636073608360936103611361236133614361536163617361836193620362136223623362436253626362736283629363036313632363336343635363636373638363936403641364236433644364536463647364836493650365136523653365436553656365736583659366036613662366336643665366636673668366936703671367236733674367536763677367836793680368136823683368436853686368736883689369036913692369336943695369636973698369937003701370237033704370537063707370837093710371137123713371437153716371737183719372037213722372337243725372637273728372937303731373237333734373537363737373837393740374137423743374437453746374737483749375037513752375337543755375637573758375937603761376237633764376537663767376837693770377137723773377437753776377737783779378037813782378337843785378637873788378937903791379237933794379537963797379837993800380138023803380438053806380738083809381038113812381338143815381638173818381938203821382238233824382538263827382838293830383138323833383438353836383738383839384038413842384338443845384638473848384938503851385238533854385538563857385838593860386138623863386438653866386738683869387038713872387338743875387638773878387938803881388238833884388538863887388838893890389138923893389438953896389738983899390039013902390339043905390639073908390939103911391239133914391539163917391839193920392139223923392439253926392739283929393039313932393339343935393639373938393939403941394239433944394539463947394839493950395139523953395439553956395739583959396039613962396339643965396639673968396939703971397239733974397539763977397839793980398139823983398439853986398739883989399039913992399339943995399639973998399940004001400240034004400540064007400840094010401140124013401440154016401740184019402040214022402340244025402640274028402940304031403240334034403540364037403840394040404140424043404440454046404740484049405040514052405340544055405640574058405940604061406240634064406540664067406840694070407140724073407440754076407740784079408040814082408340844085408640874088408940904091409240934094409540964097409840994100410141024103410441054106410741084109411041114112411341144115411641174118411941204121412241234124412541264127412841294130413141324133413441354136413741384139414041414142414341444145414641474148414941504151415241534154415541564157415841594160416141624163416441654166416741684169417041714172417341744175417641774178417941804181418241834184418541864187418841894190419141924193419441954196419741984199420042014202420342044205420642074208420942104211421242134214421542164217421842194220422142224223422442254226422742284229423042314232423342344235423642374238423942404241424242434244424542464247424842494250425142524253425442554256425742584259426042614262426342644265426642674268426942704271427242734274427542764277427842794280428142824283428442854286428742884289429042914292429342944295429642974298429943004301430243034304430543064307430843094310431143124313431443154316431743184319432043214322432343244325432643274328432943304331433243334334433543364337433843394340434143424343434443454346434743484349435043514352435343544355435643574358435943604361436243634364436543664367436843694370437143724373437443754376437743784379438043814382438343844385438643874388438943904391439243934394439543964397439843994400440144024403440444054406440744084409441044114412441344144415441644174418441944204421442244234424442544264427442844294430443144324433443444354436443744384439444044414442444344444445444644474448444944504451445244534454445544564457445844594460446144624463446444654466446744684469447044714472447344744475447644774478447944804481448244834484448544864487448844894490449144924493449444954496449744984499450045014502450345044505450645074508450945104511451245134514451545164517451845194520452145224523452445254526452745284529453045314532453345344535453645374538453945404541454245434544454545464547454845494550455145524553455445554556455745584559456045614562456345644565456645674568456945704571457245734574457545764577457845794580458145824583458445854586458745884589459045914592459345944595459645974598459946004601460246034604460546064607460846094610461146124613461446154616461746184619462046214622462346244625462646274628462946304631463246334634463546364637463846394640464146424643464446454646464746484649465046514652465346544655465646574658465946604661466246634664466546664667466846694670 |
- /*
- *
- * Linux MegaRAID device driver
- *
- * Copyright (c) 2002 LSI Logic Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Copyright (c) 2002 Red Hat, Inc. All rights reserved.
- * - fixes
- * - speed-ups (list handling fixes, issued_list, optimizations.)
- * - lots of cleanups.
- *
- * Copyright (c) 2003 Christoph Hellwig <hch@lst.de>
- * - new-style, hotplug-aware pci probing and scsi registration
- *
- * Version : v2.00.4 Mon Nov 14 14:02:43 EST 2005 - Seokmann Ju
- * <Seokmann.Ju@lsil.com>
- *
- * Description: Linux device driver for LSI Logic MegaRAID controller
- *
- * Supported controllers: MegaRAID 418, 428, 438, 466, 762, 467, 471, 490, 493
- * 518, 520, 531, 532
- *
- * This driver is supported by LSI Logic, with assistance from Red Hat, Dell,
- * and others. Please send updates to the mailing list
- * linux-scsi@vger.kernel.org .
- *
- */
- #include <linux/mm.h>
- #include <linux/fs.h>
- #include <linux/blkdev.h>
- #include <linux/uaccess.h>
- #include <asm/io.h>
- #include <linux/completion.h>
- #include <linux/delay.h>
- #include <linux/proc_fs.h>
- #include <linux/seq_file.h>
- #include <linux/reboot.h>
- #include <linux/module.h>
- #include <linux/list.h>
- #include <linux/interrupt.h>
- #include <linux/pci.h>
- #include <linux/init.h>
- #include <linux/dma-mapping.h>
- #include <linux/mutex.h>
- #include <linux/slab.h>
- #include <scsi/scsicam.h>
- #include "scsi.h"
- #include <scsi/scsi_host.h>
- #include "megaraid.h"
- #define MEGARAID_MODULE_VERSION "2.00.4"
- MODULE_AUTHOR ("sju@lsil.com");
- MODULE_DESCRIPTION ("LSI Logic MegaRAID legacy driver");
- MODULE_LICENSE ("GPL");
- MODULE_VERSION(MEGARAID_MODULE_VERSION);
- static DEFINE_MUTEX(megadev_mutex);
- static unsigned int max_cmd_per_lun = DEF_CMD_PER_LUN;
- module_param(max_cmd_per_lun, uint, 0);
- MODULE_PARM_DESC(max_cmd_per_lun, "Maximum number of commands which can be issued to a single LUN (default=DEF_CMD_PER_LUN=63)");
- static unsigned short int max_sectors_per_io = MAX_SECTORS_PER_IO;
- module_param(max_sectors_per_io, ushort, 0);
- MODULE_PARM_DESC(max_sectors_per_io, "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
- static unsigned short int max_mbox_busy_wait = MBOX_BUSY_WAIT;
- module_param(max_mbox_busy_wait, ushort, 0);
- MODULE_PARM_DESC(max_mbox_busy_wait, "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
- #define RDINDOOR(adapter) readl((adapter)->mmio_base + 0x20)
- #define RDOUTDOOR(adapter) readl((adapter)->mmio_base + 0x2C)
- #define WRINDOOR(adapter,value) writel(value, (adapter)->mmio_base + 0x20)
- #define WROUTDOOR(adapter,value) writel(value, (adapter)->mmio_base + 0x2C)
- /*
- * Global variables
- */
- static int hba_count;
- static adapter_t *hba_soft_state[MAX_CONTROLLERS];
- static struct proc_dir_entry *mega_proc_dir_entry;
- /* For controller re-ordering */
- static struct mega_hbas mega_hbas[MAX_CONTROLLERS];
- static long
- megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
- /*
- * The File Operations structure for the serial/ioctl interface of the driver
- */
- static const struct file_operations megadev_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = megadev_unlocked_ioctl,
- .open = megadev_open,
- .llseek = noop_llseek,
- };
- /*
- * Array to structures for storing the information about the controllers. This
- * information is sent to the user level applications, when they do an ioctl
- * for this information.
- */
- static struct mcontroller mcontroller[MAX_CONTROLLERS];
- /* The current driver version */
- static u32 driver_ver = 0x02000000;
- /* major number used by the device for character interface */
- static int major;
- #define IS_RAID_CH(hba, ch) (((hba)->mega_ch_class >> (ch)) & 0x01)
- /*
- * Debug variable to print some diagnostic messages
- */
- static int trace_level;
- /**
- * mega_setup_mailbox()
- * @adapter - pointer to our soft state
- *
- * Allocates a 8 byte aligned memory for the handshake mailbox.
- */
- static int
- mega_setup_mailbox(adapter_t *adapter)
- {
- unsigned long align;
- adapter->una_mbox64 = pci_alloc_consistent(adapter->dev,
- sizeof(mbox64_t), &adapter->una_mbox64_dma);
- if( !adapter->una_mbox64 ) return -1;
-
- adapter->mbox = &adapter->una_mbox64->mbox;
- adapter->mbox = (mbox_t *)((((unsigned long) adapter->mbox) + 15) &
- (~0UL ^ 0xFUL));
- adapter->mbox64 = (mbox64_t *)(((unsigned long)adapter->mbox) - 8);
- align = ((void *)adapter->mbox) - ((void *)&adapter->una_mbox64->mbox);
- adapter->mbox_dma = adapter->una_mbox64_dma + 8 + align;
- /*
- * Register the mailbox if the controller is an io-mapped controller
- */
- if( adapter->flag & BOARD_IOMAP ) {
- outb(adapter->mbox_dma & 0xFF,
- adapter->host->io_port + MBOX_PORT0);
- outb((adapter->mbox_dma >> 8) & 0xFF,
- adapter->host->io_port + MBOX_PORT1);
- outb((adapter->mbox_dma >> 16) & 0xFF,
- adapter->host->io_port + MBOX_PORT2);
- outb((adapter->mbox_dma >> 24) & 0xFF,
- adapter->host->io_port + MBOX_PORT3);
- outb(ENABLE_MBOX_BYTE,
- adapter->host->io_port + ENABLE_MBOX_REGION);
- irq_ack(adapter);
- irq_enable(adapter);
- }
- return 0;
- }
- /*
- * mega_query_adapter()
- * @adapter - pointer to our soft state
- *
- * Issue the adapter inquiry commands to the controller and find out
- * information and parameter about the devices attached
- */
- static int
- mega_query_adapter(adapter_t *adapter)
- {
- dma_addr_t prod_info_dma_handle;
- mega_inquiry3 *inquiry3;
- u8 raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- int retval;
- /* Initialize adapter inquiry mailbox */
- mbox = (mbox_t *)raw_mbox;
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
- /*
- * Try to issue Inquiry3 command
- * if not succeeded, then issue MEGA_MBOXCMD_ADAPTERINQ command and
- * update enquiry3 structure
- */
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
- inquiry3 = (mega_inquiry3 *)adapter->mega_buffer;
- raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */
- raw_mbox[2] = NC_SUBOP_ENQUIRY3; /* i.e. 0x0F */
- raw_mbox[3] = ENQ3_GET_SOLICITED_FULL; /* i.e. 0x02 */
- /* Issue a blocking command to the card */
- if ((retval = issue_scb_block(adapter, raw_mbox))) {
- /* the adapter does not support 40ld */
- mraid_ext_inquiry *ext_inq;
- mraid_inquiry *inq;
- dma_addr_t dma_handle;
- ext_inq = pci_alloc_consistent(adapter->dev,
- sizeof(mraid_ext_inquiry), &dma_handle);
- if( ext_inq == NULL ) return -1;
- inq = &ext_inq->raid_inq;
- mbox->m_out.xferaddr = (u32)dma_handle;
- /*issue old 0x04 command to adapter */
- mbox->m_out.cmd = MEGA_MBOXCMD_ADPEXTINQ;
- issue_scb_block(adapter, raw_mbox);
- /*
- * update Enquiry3 and ProductInfo structures with
- * mraid_inquiry structure
- */
- mega_8_to_40ld(inq, inquiry3,
- (mega_product_info *)&adapter->product_info);
- pci_free_consistent(adapter->dev, sizeof(mraid_ext_inquiry),
- ext_inq, dma_handle);
- } else { /*adapter supports 40ld */
- adapter->flag |= BOARD_40LD;
- /*
- * get product_info, which is static information and will be
- * unchanged
- */
- prod_info_dma_handle = pci_map_single(adapter->dev, (void *)
- &adapter->product_info,
- sizeof(mega_product_info), PCI_DMA_FROMDEVICE);
- mbox->m_out.xferaddr = prod_info_dma_handle;
- raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */
- raw_mbox[2] = NC_SUBOP_PRODUCT_INFO; /* i.e. 0x0E */
- if ((retval = issue_scb_block(adapter, raw_mbox)))
- dev_warn(&adapter->dev->dev,
- "Product_info cmd failed with error: %d\n",
- retval);
- pci_unmap_single(adapter->dev, prod_info_dma_handle,
- sizeof(mega_product_info), PCI_DMA_FROMDEVICE);
- }
- /*
- * kernel scans the channels from 0 to <= max_channel
- */
- adapter->host->max_channel =
- adapter->product_info.nchannels + NVIRT_CHAN -1;
- adapter->host->max_id = 16; /* max targets per channel */
- adapter->host->max_lun = 7; /* Up to 7 luns for non disk devices */
- adapter->host->cmd_per_lun = max_cmd_per_lun;
- adapter->numldrv = inquiry3->num_ldrv;
- adapter->max_cmds = adapter->product_info.max_commands;
- if(adapter->max_cmds > MAX_COMMANDS)
- adapter->max_cmds = MAX_COMMANDS;
- adapter->host->can_queue = adapter->max_cmds - 1;
- /*
- * Get the maximum number of scatter-gather elements supported by this
- * firmware
- */
- mega_get_max_sgl(adapter);
- adapter->host->sg_tablesize = adapter->sglen;
- /* use HP firmware and bios version encoding
- Note: fw_version[0|1] and bios_version[0|1] were originally shifted
- right 8 bits making them zero. This 0 value was hardcoded to fix
- sparse warnings. */
- if (adapter->product_info.subsysvid == PCI_VENDOR_ID_HP) {
- snprintf(adapter->fw_version, sizeof(adapter->fw_version),
- "%c%d%d.%d%d",
- adapter->product_info.fw_version[2],
- 0,
- adapter->product_info.fw_version[1] & 0x0f,
- 0,
- adapter->product_info.fw_version[0] & 0x0f);
- snprintf(adapter->bios_version, sizeof(adapter->fw_version),
- "%c%d%d.%d%d",
- adapter->product_info.bios_version[2],
- 0,
- adapter->product_info.bios_version[1] & 0x0f,
- 0,
- adapter->product_info.bios_version[0] & 0x0f);
- } else {
- memcpy(adapter->fw_version,
- (char *)adapter->product_info.fw_version, 4);
- adapter->fw_version[4] = 0;
- memcpy(adapter->bios_version,
- (char *)adapter->product_info.bios_version, 4);
- adapter->bios_version[4] = 0;
- }
- dev_notice(&adapter->dev->dev, "[%s:%s] detected %d logical drives\n",
- adapter->fw_version, adapter->bios_version, adapter->numldrv);
- /*
- * Do we support extended (>10 bytes) cdbs
- */
- adapter->support_ext_cdb = mega_support_ext_cdb(adapter);
- if (adapter->support_ext_cdb)
- dev_notice(&adapter->dev->dev, "supports extended CDBs\n");
- return 0;
- }
- /**
- * mega_runpendq()
- * @adapter - pointer to our soft state
- *
- * Runs through the list of pending requests.
- */
- static inline void
- mega_runpendq(adapter_t *adapter)
- {
- if(!list_empty(&adapter->pending_list))
- __mega_runpendq(adapter);
- }
- /*
- * megaraid_queue()
- * @scmd - Issue this scsi command
- * @done - the callback hook into the scsi mid-layer
- *
- * The command queuing entry point for the mid-layer.
- */
- static int
- megaraid_queue_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
- {
- adapter_t *adapter;
- scb_t *scb;
- int busy=0;
- unsigned long flags;
- adapter = (adapter_t *)scmd->device->host->hostdata;
- scmd->scsi_done = done;
- /*
- * Allocate and build a SCB request
- * busy flag will be set if mega_build_cmd() command could not
- * allocate scb. We will return non-zero status in that case.
- * NOTE: scb can be null even though certain commands completed
- * successfully, e.g., MODE_SENSE and TEST_UNIT_READY, we would
- * return 0 in that case.
- */
- spin_lock_irqsave(&adapter->lock, flags);
- scb = mega_build_cmd(adapter, scmd, &busy);
- if (!scb)
- goto out;
- scb->state |= SCB_PENDQ;
- list_add_tail(&scb->list, &adapter->pending_list);
- /*
- * Check if the HBA is in quiescent state, e.g., during a
- * delete logical drive opertion. If it is, don't run
- * the pending_list.
- */
- if (atomic_read(&adapter->quiescent) == 0)
- mega_runpendq(adapter);
- busy = 0;
- out:
- spin_unlock_irqrestore(&adapter->lock, flags);
- return busy;
- }
- static DEF_SCSI_QCMD(megaraid_queue)
- /**
- * mega_allocate_scb()
- * @adapter - pointer to our soft state
- * @cmd - scsi command from the mid-layer
- *
- * Allocate a SCB structure. This is the central structure for controller
- * commands.
- */
- static inline scb_t *
- mega_allocate_scb(adapter_t *adapter, struct scsi_cmnd *cmd)
- {
- struct list_head *head = &adapter->free_list;
- scb_t *scb;
- /* Unlink command from Free List */
- if( !list_empty(head) ) {
- scb = list_entry(head->next, scb_t, list);
- list_del_init(head->next);
- scb->state = SCB_ACTIVE;
- scb->cmd = cmd;
- scb->dma_type = MEGA_DMA_TYPE_NONE;
- return scb;
- }
- return NULL;
- }
- /**
- * mega_get_ldrv_num()
- * @adapter - pointer to our soft state
- * @cmd - scsi mid layer command
- * @channel - channel on the controller
- *
- * Calculate the logical drive number based on the information in scsi command
- * and the channel number.
- */
- static inline int
- mega_get_ldrv_num(adapter_t *adapter, struct scsi_cmnd *cmd, int channel)
- {
- int tgt;
- int ldrv_num;
- tgt = cmd->device->id;
-
- if ( tgt > adapter->this_id )
- tgt--; /* we do not get inquires for initiator id */
- ldrv_num = (channel * 15) + tgt;
- /*
- * If we have a logical drive with boot enabled, project it first
- */
- if( adapter->boot_ldrv_enabled ) {
- if( ldrv_num == 0 ) {
- ldrv_num = adapter->boot_ldrv;
- }
- else {
- if( ldrv_num <= adapter->boot_ldrv ) {
- ldrv_num--;
- }
- }
- }
- /*
- * If "delete logical drive" feature is enabled on this controller.
- * Do only if at least one delete logical drive operation was done.
- *
- * Also, after logical drive deletion, instead of logical drive number,
- * the value returned should be 0x80+logical drive id.
- *
- * These is valid only for IO commands.
- */
- if (adapter->support_random_del && adapter->read_ldidmap )
- switch (cmd->cmnd[0]) {
- case READ_6: /* fall through */
- case WRITE_6: /* fall through */
- case READ_10: /* fall through */
- case WRITE_10:
- ldrv_num += 0x80;
- }
- return ldrv_num;
- }
- /**
- * mega_build_cmd()
- * @adapter - pointer to our soft state
- * @cmd - Prepare using this scsi command
- * @busy - busy flag if no resources
- *
- * Prepares a command and scatter gather list for the controller. This routine
- * also finds out if the commands is intended for a logical drive or a
- * physical device and prepares the controller command accordingly.
- *
- * We also re-order the logical drives and physical devices based on their
- * boot settings.
- */
- static scb_t *
- mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
- {
- mega_ext_passthru *epthru;
- mega_passthru *pthru;
- scb_t *scb;
- mbox_t *mbox;
- u32 seg;
- char islogical;
- int max_ldrv_num;
- int channel = 0;
- int target = 0;
- int ldrv_num = 0; /* logical drive number */
- /*
- * We know what channels our logical drives are on - mega_find_card()
- */
- islogical = adapter->logdrv_chan[cmd->device->channel];
- /*
- * The theory: If physical drive is chosen for boot, all the physical
- * devices are exported before the logical drives, otherwise physical
- * devices are pushed after logical drives, in which case - Kernel sees
- * the physical devices on virtual channel which is obviously converted
- * to actual channel on the HBA.
- */
- if( adapter->boot_pdrv_enabled ) {
- if( islogical ) {
- /* logical channel */
- channel = cmd->device->channel -
- adapter->product_info.nchannels;
- }
- else {
- /* this is physical channel */
- channel = cmd->device->channel;
- target = cmd->device->id;
- /*
- * boot from a physical disk, that disk needs to be
- * exposed first IF both the channels are SCSI, then
- * booting from the second channel is not allowed.
- */
- if( target == 0 ) {
- target = adapter->boot_pdrv_tgt;
- }
- else if( target == adapter->boot_pdrv_tgt ) {
- target = 0;
- }
- }
- }
- else {
- if( islogical ) {
- /* this is the logical channel */
- channel = cmd->device->channel;
- }
- else {
- /* physical channel */
- channel = cmd->device->channel - NVIRT_CHAN;
- target = cmd->device->id;
- }
- }
- if(islogical) {
- /* have just LUN 0 for each target on virtual channels */
- if (cmd->device->lun) {
- cmd->result = (DID_BAD_TARGET << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
- ldrv_num = mega_get_ldrv_num(adapter, cmd, channel);
- max_ldrv_num = (adapter->flag & BOARD_40LD) ?
- MAX_LOGICAL_DRIVES_40LD : MAX_LOGICAL_DRIVES_8LD;
- /*
- * max_ldrv_num increases by 0x80 if some logical drive was
- * deleted.
- */
- if(adapter->read_ldidmap)
- max_ldrv_num += 0x80;
- if(ldrv_num > max_ldrv_num ) {
- cmd->result = (DID_BAD_TARGET << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
- }
- else {
- if( cmd->device->lun > 7) {
- /*
- * Do not support lun >7 for physically accessed
- * devices
- */
- cmd->result = (DID_BAD_TARGET << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
- }
- /*
- *
- * Logical drive commands
- *
- */
- if(islogical) {
- switch (cmd->cmnd[0]) {
- case TEST_UNIT_READY:
- #if MEGA_HAVE_CLUSTERING
- /*
- * Do we support clustering and is the support enabled
- * If no, return success always
- */
- if( !adapter->has_cluster ) {
- cmd->result = (DID_OK << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
- *busy = 1;
- return NULL;
- }
- scb->raw_mbox[0] = MEGA_CLUSTER_CMD;
- scb->raw_mbox[2] = MEGA_RESERVATION_STATUS;
- scb->raw_mbox[3] = ldrv_num;
- scb->dma_direction = PCI_DMA_NONE;
- return scb;
- #else
- cmd->result = (DID_OK << 16);
- cmd->scsi_done(cmd);
- return NULL;
- #endif
- case MODE_SENSE: {
- char *buf;
- struct scatterlist *sg;
- sg = scsi_sglist(cmd);
- buf = kmap_atomic(sg_page(sg)) + sg->offset;
- memset(buf, 0, cmd->cmnd[4]);
- kunmap_atomic(buf - sg->offset);
- cmd->result = (DID_OK << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
- case READ_CAPACITY:
- case INQUIRY:
- if(!(adapter->flag & (1L << cmd->device->channel))) {
- dev_notice(&adapter->dev->dev,
- "scsi%d: scanning scsi channel %d "
- "for logical drives\n",
- adapter->host->host_no,
- cmd->device->channel);
- adapter->flag |= (1L << cmd->device->channel);
- }
- /* Allocate a SCB and initialize passthru */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
- *busy = 1;
- return NULL;
- }
- pthru = scb->pthru;
- mbox = (mbox_t *)scb->raw_mbox;
- memset(mbox, 0, sizeof(scb->raw_mbox));
- memset(pthru, 0, sizeof(mega_passthru));
- pthru->timeout = 0;
- pthru->ars = 1;
- pthru->reqsenselen = 14;
- pthru->islogical = 1;
- pthru->logdrv = ldrv_num;
- pthru->cdblen = cmd->cmd_len;
- memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len);
- if( adapter->has_64bit_addr ) {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
- }
- else {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
- }
- scb->dma_direction = PCI_DMA_FROMDEVICE;
- pthru->numsgelements = mega_build_sglist(adapter, scb,
- &pthru->dataxferaddr, &pthru->dataxferlen);
- mbox->m_out.xferaddr = scb->pthru_dma_addr;
- return scb;
- case READ_6:
- case WRITE_6:
- case READ_10:
- case WRITE_10:
- case READ_12:
- case WRITE_12:
- /* Allocate a SCB and initialize mailbox */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
- *busy = 1;
- return NULL;
- }
- mbox = (mbox_t *)scb->raw_mbox;
- memset(mbox, 0, sizeof(scb->raw_mbox));
- mbox->m_out.logdrv = ldrv_num;
- /*
- * A little hack: 2nd bit is zero for all scsi read
- * commands and is set for all scsi write commands
- */
- if( adapter->has_64bit_addr ) {
- mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
- MEGA_MBOXCMD_LWRITE64:
- MEGA_MBOXCMD_LREAD64 ;
- }
- else {
- mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
- MEGA_MBOXCMD_LWRITE:
- MEGA_MBOXCMD_LREAD ;
- }
- /*
- * 6-byte READ(0x08) or WRITE(0x0A) cdb
- */
- if( cmd->cmd_len == 6 ) {
- mbox->m_out.numsectors = (u32) cmd->cmnd[4];
- mbox->m_out.lba =
- ((u32)cmd->cmnd[1] << 16) |
- ((u32)cmd->cmnd[2] << 8) |
- (u32)cmd->cmnd[3];
- mbox->m_out.lba &= 0x1FFFFF;
- #if MEGA_HAVE_STATS
- /*
- * Take modulo 0x80, since the logical drive
- * number increases by 0x80 when a logical
- * drive was deleted
- */
- if (*cmd->cmnd == READ_6) {
- adapter->nreads[ldrv_num%0x80]++;
- adapter->nreadblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- } else {
- adapter->nwrites[ldrv_num%0x80]++;
- adapter->nwriteblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- }
- #endif
- }
- /*
- * 10-byte READ(0x28) or WRITE(0x2A) cdb
- */
- if( cmd->cmd_len == 10 ) {
- mbox->m_out.numsectors =
- (u32)cmd->cmnd[8] |
- ((u32)cmd->cmnd[7] << 8);
- mbox->m_out.lba =
- ((u32)cmd->cmnd[2] << 24) |
- ((u32)cmd->cmnd[3] << 16) |
- ((u32)cmd->cmnd[4] << 8) |
- (u32)cmd->cmnd[5];
- #if MEGA_HAVE_STATS
- if (*cmd->cmnd == READ_10) {
- adapter->nreads[ldrv_num%0x80]++;
- adapter->nreadblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- } else {
- adapter->nwrites[ldrv_num%0x80]++;
- adapter->nwriteblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- }
- #endif
- }
- /*
- * 12-byte READ(0xA8) or WRITE(0xAA) cdb
- */
- if( cmd->cmd_len == 12 ) {
- mbox->m_out.lba =
- ((u32)cmd->cmnd[2] << 24) |
- ((u32)cmd->cmnd[3] << 16) |
- ((u32)cmd->cmnd[4] << 8) |
- (u32)cmd->cmnd[5];
- mbox->m_out.numsectors =
- ((u32)cmd->cmnd[6] << 24) |
- ((u32)cmd->cmnd[7] << 16) |
- ((u32)cmd->cmnd[8] << 8) |
- (u32)cmd->cmnd[9];
- #if MEGA_HAVE_STATS
- if (*cmd->cmnd == READ_12) {
- adapter->nreads[ldrv_num%0x80]++;
- adapter->nreadblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- } else {
- adapter->nwrites[ldrv_num%0x80]++;
- adapter->nwriteblocks[ldrv_num%0x80] +=
- mbox->m_out.numsectors;
- }
- #endif
- }
- /*
- * If it is a read command
- */
- if( (*cmd->cmnd & 0x0F) == 0x08 ) {
- scb->dma_direction = PCI_DMA_FROMDEVICE;
- }
- else {
- scb->dma_direction = PCI_DMA_TODEVICE;
- }
- /* Calculate Scatter-Gather info */
- mbox->m_out.numsgelements = mega_build_sglist(adapter, scb,
- (u32 *)&mbox->m_out.xferaddr, &seg);
- return scb;
- #if MEGA_HAVE_CLUSTERING
- case RESERVE: /* Fall through */
- case RELEASE:
- /*
- * Do we support clustering and is the support enabled
- */
- if( ! adapter->has_cluster ) {
- cmd->result = (DID_BAD_TARGET << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
- /* Allocate a SCB and initialize mailbox */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
- *busy = 1;
- return NULL;
- }
- scb->raw_mbox[0] = MEGA_CLUSTER_CMD;
- scb->raw_mbox[2] = ( *cmd->cmnd == RESERVE ) ?
- MEGA_RESERVE_LD : MEGA_RELEASE_LD;
- scb->raw_mbox[3] = ldrv_num;
- scb->dma_direction = PCI_DMA_NONE;
- return scb;
- #endif
- default:
- cmd->result = (DID_BAD_TARGET << 16);
- cmd->scsi_done(cmd);
- return NULL;
- }
- }
- /*
- * Passthru drive commands
- */
- else {
- /* Allocate a SCB and initialize passthru */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
- *busy = 1;
- return NULL;
- }
- mbox = (mbox_t *)scb->raw_mbox;
- memset(mbox, 0, sizeof(scb->raw_mbox));
- if( adapter->support_ext_cdb ) {
- epthru = mega_prepare_extpassthru(adapter, scb, cmd,
- channel, target);
- mbox->m_out.cmd = MEGA_MBOXCMD_EXTPTHRU;
- mbox->m_out.xferaddr = scb->epthru_dma_addr;
- }
- else {
- pthru = mega_prepare_passthru(adapter, scb, cmd,
- channel, target);
- /* Initialize mailbox */
- if( adapter->has_64bit_addr ) {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
- }
- else {
- mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
- }
- mbox->m_out.xferaddr = scb->pthru_dma_addr;
- }
- return scb;
- }
- return NULL;
- }
- /**
- * mega_prepare_passthru()
- * @adapter - pointer to our soft state
- * @scb - our scsi control block
- * @cmd - scsi command from the mid-layer
- * @channel - actual channel on the controller
- * @target - actual id on the controller.
- *
- * prepare a command for the scsi physical devices.
- */
- static mega_passthru *
- mega_prepare_passthru(adapter_t *adapter, scb_t *scb, struct scsi_cmnd *cmd,
- int channel, int target)
- {
- mega_passthru *pthru;
- pthru = scb->pthru;
- memset(pthru, 0, sizeof (mega_passthru));
- /* 0=6sec/1=60sec/2=10min/3=3hrs */
- pthru->timeout = 2;
- pthru->ars = 1;
- pthru->reqsenselen = 14;
- pthru->islogical = 0;
- pthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel;
- pthru->target = (adapter->flag & BOARD_40LD) ?
- (channel << 4) | target : target;
- pthru->cdblen = cmd->cmd_len;
- pthru->logdrv = cmd->device->lun;
- memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len);
- /* Not sure about the direction */
- scb->dma_direction = PCI_DMA_BIDIRECTIONAL;
- /* Special Code for Handling READ_CAPA/ INQ using bounce buffers */
- switch (cmd->cmnd[0]) {
- case INQUIRY:
- case READ_CAPACITY:
- if(!(adapter->flag & (1L << cmd->device->channel))) {
- dev_notice(&adapter->dev->dev,
- "scsi%d: scanning scsi channel %d [P%d] "
- "for physical devices\n",
- adapter->host->host_no,
- cmd->device->channel, channel);
- adapter->flag |= (1L << cmd->device->channel);
- }
- /* Fall through */
- default:
- pthru->numsgelements = mega_build_sglist(adapter, scb,
- &pthru->dataxferaddr, &pthru->dataxferlen);
- break;
- }
- return pthru;
- }
- /**
- * mega_prepare_extpassthru()
- * @adapter - pointer to our soft state
- * @scb - our scsi control block
- * @cmd - scsi command from the mid-layer
- * @channel - actual channel on the controller
- * @target - actual id on the controller.
- *
- * prepare a command for the scsi physical devices. This rountine prepares
- * commands for devices which can take extended CDBs (>10 bytes)
- */
- static mega_ext_passthru *
- mega_prepare_extpassthru(adapter_t *adapter, scb_t *scb,
- struct scsi_cmnd *cmd,
- int channel, int target)
- {
- mega_ext_passthru *epthru;
- epthru = scb->epthru;
- memset(epthru, 0, sizeof(mega_ext_passthru));
- /* 0=6sec/1=60sec/2=10min/3=3hrs */
- epthru->timeout = 2;
- epthru->ars = 1;
- epthru->reqsenselen = 14;
- epthru->islogical = 0;
- epthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel;
- epthru->target = (adapter->flag & BOARD_40LD) ?
- (channel << 4) | target : target;
- epthru->cdblen = cmd->cmd_len;
- epthru->logdrv = cmd->device->lun;
- memcpy(epthru->cdb, cmd->cmnd, cmd->cmd_len);
- /* Not sure about the direction */
- scb->dma_direction = PCI_DMA_BIDIRECTIONAL;
- switch(cmd->cmnd[0]) {
- case INQUIRY:
- case READ_CAPACITY:
- if(!(adapter->flag & (1L << cmd->device->channel))) {
- dev_notice(&adapter->dev->dev,
- "scsi%d: scanning scsi channel %d [P%d] "
- "for physical devices\n",
- adapter->host->host_no,
- cmd->device->channel, channel);
- adapter->flag |= (1L << cmd->device->channel);
- }
- /* Fall through */
- default:
- epthru->numsgelements = mega_build_sglist(adapter, scb,
- &epthru->dataxferaddr, &epthru->dataxferlen);
- break;
- }
- return epthru;
- }
- static void
- __mega_runpendq(adapter_t *adapter)
- {
- scb_t *scb;
- struct list_head *pos, *next;
- /* Issue any pending commands to the card */
- list_for_each_safe(pos, next, &adapter->pending_list) {
- scb = list_entry(pos, scb_t, list);
- if( !(scb->state & SCB_ISSUED) ) {
- if( issue_scb(adapter, scb) != 0 )
- return;
- }
- }
- return;
- }
- /**
- * issue_scb()
- * @adapter - pointer to our soft state
- * @scb - scsi control block
- *
- * Post a command to the card if the mailbox is available, otherwise return
- * busy. We also take the scb from the pending list if the mailbox is
- * available.
- */
- static int
- issue_scb(adapter_t *adapter, scb_t *scb)
- {
- volatile mbox64_t *mbox64 = adapter->mbox64;
- volatile mbox_t *mbox = adapter->mbox;
- unsigned int i = 0;
- if(unlikely(mbox->m_in.busy)) {
- do {
- udelay(1);
- i++;
- } while( mbox->m_in.busy && (i < max_mbox_busy_wait) );
- if(mbox->m_in.busy) return -1;
- }
- /* Copy mailbox data into host structure */
- memcpy((char *)&mbox->m_out, (char *)scb->raw_mbox,
- sizeof(struct mbox_out));
- mbox->m_out.cmdid = scb->idx; /* Set cmdid */
- mbox->m_in.busy = 1; /* Set busy */
- /*
- * Increment the pending queue counter
- */
- atomic_inc(&adapter->pend_cmds);
- switch (mbox->m_out.cmd) {
- case MEGA_MBOXCMD_LREAD64:
- case MEGA_MBOXCMD_LWRITE64:
- case MEGA_MBOXCMD_PASSTHRU64:
- case MEGA_MBOXCMD_EXTPTHRU:
- mbox64->xfer_segment_lo = mbox->m_out.xferaddr;
- mbox64->xfer_segment_hi = 0;
- mbox->m_out.xferaddr = 0xFFFFFFFF;
- break;
- default:
- mbox64->xfer_segment_lo = 0;
- mbox64->xfer_segment_hi = 0;
- }
- /*
- * post the command
- */
- scb->state |= SCB_ISSUED;
- if( likely(adapter->flag & BOARD_MEMMAP) ) {
- mbox->m_in.poll = 0;
- mbox->m_in.ack = 0;
- WRINDOOR(adapter, adapter->mbox_dma | 0x1);
- }
- else {
- irq_enable(adapter);
- issue_command(adapter);
- }
- return 0;
- }
- /*
- * Wait until the controller's mailbox is available
- */
- static inline int
- mega_busywait_mbox (adapter_t *adapter)
- {
- if (adapter->mbox->m_in.busy)
- return __mega_busywait_mbox(adapter);
- return 0;
- }
- /**
- * issue_scb_block()
- * @adapter - pointer to our soft state
- * @raw_mbox - the mailbox
- *
- * Issue a scb in synchronous and non-interrupt mode
- */
- static int
- issue_scb_block(adapter_t *adapter, u_char *raw_mbox)
- {
- volatile mbox64_t *mbox64 = adapter->mbox64;
- volatile mbox_t *mbox = adapter->mbox;
- u8 byte;
- /* Wait until mailbox is free */
- if(mega_busywait_mbox (adapter))
- goto bug_blocked_mailbox;
- /* Copy mailbox data into host structure */
- memcpy((char *) mbox, raw_mbox, sizeof(struct mbox_out));
- mbox->m_out.cmdid = 0xFE;
- mbox->m_in.busy = 1;
- switch (raw_mbox[0]) {
- case MEGA_MBOXCMD_LREAD64:
- case MEGA_MBOXCMD_LWRITE64:
- case MEGA_MBOXCMD_PASSTHRU64:
- case MEGA_MBOXCMD_EXTPTHRU:
- mbox64->xfer_segment_lo = mbox->m_out.xferaddr;
- mbox64->xfer_segment_hi = 0;
- mbox->m_out.xferaddr = 0xFFFFFFFF;
- break;
- default:
- mbox64->xfer_segment_lo = 0;
- mbox64->xfer_segment_hi = 0;
- }
- if( likely(adapter->flag & BOARD_MEMMAP) ) {
- mbox->m_in.poll = 0;
- mbox->m_in.ack = 0;
- mbox->m_in.numstatus = 0xFF;
- mbox->m_in.status = 0xFF;
- WRINDOOR(adapter, adapter->mbox_dma | 0x1);
- while((volatile u8)mbox->m_in.numstatus == 0xFF)
- cpu_relax();
- mbox->m_in.numstatus = 0xFF;
- while( (volatile u8)mbox->m_in.poll != 0x77 )
- cpu_relax();
- mbox->m_in.poll = 0;
- mbox->m_in.ack = 0x77;
- WRINDOOR(adapter, adapter->mbox_dma | 0x2);
- while(RDINDOOR(adapter) & 0x2)
- cpu_relax();
- }
- else {
- irq_disable(adapter);
- issue_command(adapter);
- while (!((byte = irq_state(adapter)) & INTR_VALID))
- cpu_relax();
- set_irq_state(adapter, byte);
- irq_enable(adapter);
- irq_ack(adapter);
- }
- return mbox->m_in.status;
- bug_blocked_mailbox:
- dev_warn(&adapter->dev->dev, "Blocked mailbox......!!\n");
- udelay (1000);
- return -1;
- }
- /**
- * megaraid_isr_iomapped()
- * @irq - irq
- * @devp - pointer to our soft state
- *
- * Interrupt service routine for io-mapped controllers.
- * Find out if our device is interrupting. If yes, acknowledge the interrupt
- * and service the completed commands.
- */
- static irqreturn_t
- megaraid_isr_iomapped(int irq, void *devp)
- {
- adapter_t *adapter = devp;
- unsigned long flags;
- u8 status;
- u8 nstatus;
- u8 completed[MAX_FIRMWARE_STATUS];
- u8 byte;
- int handled = 0;
- /*
- * loop till F/W has more commands for us to complete.
- */
- spin_lock_irqsave(&adapter->lock, flags);
- do {
- /* Check if a valid interrupt is pending */
- byte = irq_state(adapter);
- if( (byte & VALID_INTR_BYTE) == 0 ) {
- /*
- * No more pending commands
- */
- goto out_unlock;
- }
- set_irq_state(adapter, byte);
- while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus)
- == 0xFF)
- cpu_relax();
- adapter->mbox->m_in.numstatus = 0xFF;
- status = adapter->mbox->m_in.status;
- /*
- * decrement the pending queue counter
- */
- atomic_sub(nstatus, &adapter->pend_cmds);
- memcpy(completed, (void *)adapter->mbox->m_in.completed,
- nstatus);
- /* Acknowledge interrupt */
- irq_ack(adapter);
- mega_cmd_done(adapter, completed, nstatus, status);
- mega_rundoneq(adapter);
- handled = 1;
- /* Loop through any pending requests */
- if(atomic_read(&adapter->quiescent) == 0) {
- mega_runpendq(adapter);
- }
- } while(1);
- out_unlock:
- spin_unlock_irqrestore(&adapter->lock, flags);
- return IRQ_RETVAL(handled);
- }
- /**
- * megaraid_isr_memmapped()
- * @irq - irq
- * @devp - pointer to our soft state
- *
- * Interrupt service routine for memory-mapped controllers.
- * Find out if our device is interrupting. If yes, acknowledge the interrupt
- * and service the completed commands.
- */
- static irqreturn_t
- megaraid_isr_memmapped(int irq, void *devp)
- {
- adapter_t *adapter = devp;
- unsigned long flags;
- u8 status;
- u32 dword = 0;
- u8 nstatus;
- u8 completed[MAX_FIRMWARE_STATUS];
- int handled = 0;
- /*
- * loop till F/W has more commands for us to complete.
- */
- spin_lock_irqsave(&adapter->lock, flags);
- do {
- /* Check if a valid interrupt is pending */
- dword = RDOUTDOOR(adapter);
- if(dword != 0x10001234) {
- /*
- * No more pending commands
- */
- goto out_unlock;
- }
- WROUTDOOR(adapter, 0x10001234);
- while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus)
- == 0xFF) {
- cpu_relax();
- }
- adapter->mbox->m_in.numstatus = 0xFF;
- status = adapter->mbox->m_in.status;
- /*
- * decrement the pending queue counter
- */
- atomic_sub(nstatus, &adapter->pend_cmds);
- memcpy(completed, (void *)adapter->mbox->m_in.completed,
- nstatus);
- /* Acknowledge interrupt */
- WRINDOOR(adapter, 0x2);
- handled = 1;
- while( RDINDOOR(adapter) & 0x02 )
- cpu_relax();
- mega_cmd_done(adapter, completed, nstatus, status);
- mega_rundoneq(adapter);
- /* Loop through any pending requests */
- if(atomic_read(&adapter->quiescent) == 0) {
- mega_runpendq(adapter);
- }
- } while(1);
- out_unlock:
- spin_unlock_irqrestore(&adapter->lock, flags);
- return IRQ_RETVAL(handled);
- }
- /**
- * mega_cmd_done()
- * @adapter - pointer to our soft state
- * @completed - array of ids of completed commands
- * @nstatus - number of completed commands
- * @status - status of the last command completed
- *
- * Complete the commands and call the scsi mid-layer callback hooks.
- */
- static void
- mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
- {
- mega_ext_passthru *epthru = NULL;
- struct scatterlist *sgl;
- struct scsi_cmnd *cmd = NULL;
- mega_passthru *pthru = NULL;
- mbox_t *mbox = NULL;
- u8 c;
- scb_t *scb;
- int islogical;
- int cmdid;
- int i;
- /*
- * for all the commands completed, call the mid-layer callback routine
- * and free the scb.
- */
- for( i = 0; i < nstatus; i++ ) {
- cmdid = completed[i];
- /*
- * Only free SCBs for the commands coming down from the
- * mid-layer, not for which were issued internally
- *
- * For internal command, restore the status returned by the
- * firmware so that user can interpret it.
- */
- if (cmdid == CMDID_INT_CMDS) {
- scb = &adapter->int_scb;
- list_del_init(&scb->list);
- scb->state = SCB_FREE;
- adapter->int_status = status;
- complete(&adapter->int_waitq);
- } else {
- scb = &adapter->scb_list[cmdid];
- /*
- * Make sure f/w has completed a valid command
- */
- if( !(scb->state & SCB_ISSUED) || scb->cmd == NULL ) {
- dev_crit(&adapter->dev->dev, "invalid command "
- "Id %d, scb->state:%x, scsi cmd:%p\n",
- cmdid, scb->state, scb->cmd);
- continue;
- }
- /*
- * Was a abort issued for this command
- */
- if( scb->state & SCB_ABORT ) {
- dev_warn(&adapter->dev->dev,
- "aborted cmd [%x] complete\n",
- scb->idx);
- scb->cmd->result = (DID_ABORT << 16);
- list_add_tail(SCSI_LIST(scb->cmd),
- &adapter->completed_list);
- mega_free_scb(adapter, scb);
- continue;
- }
- /*
- * Was a reset issued for this command
- */
- if( scb->state & SCB_RESET ) {
- dev_warn(&adapter->dev->dev,
- "reset cmd [%x] complete\n",
- scb->idx);
- scb->cmd->result = (DID_RESET << 16);
- list_add_tail(SCSI_LIST(scb->cmd),
- &adapter->completed_list);
- mega_free_scb (adapter, scb);
- continue;
- }
- cmd = scb->cmd;
- pthru = scb->pthru;
- epthru = scb->epthru;
- mbox = (mbox_t *)scb->raw_mbox;
- #if MEGA_HAVE_STATS
- {
- int logdrv = mbox->m_out.logdrv;
- islogical = adapter->logdrv_chan[cmd->channel];
- /*
- * Maintain an error counter for the logical drive.
- * Some application like SNMP agent need such
- * statistics
- */
- if( status && islogical && (cmd->cmnd[0] == READ_6 ||
- cmd->cmnd[0] == READ_10 ||
- cmd->cmnd[0] == READ_12)) {
- /*
- * Logical drive number increases by 0x80 when
- * a logical drive is deleted
- */
- adapter->rd_errors[logdrv%0x80]++;
- }
- if( status && islogical && (cmd->cmnd[0] == WRITE_6 ||
- cmd->cmnd[0] == WRITE_10 ||
- cmd->cmnd[0] == WRITE_12)) {
- /*
- * Logical drive number increases by 0x80 when
- * a logical drive is deleted
- */
- adapter->wr_errors[logdrv%0x80]++;
- }
- }
- #endif
- }
- /*
- * Do not return the presence of hard disk on the channel so,
- * inquiry sent, and returned data==hard disk or removable
- * hard disk and not logical, request should return failure! -
- * PJ
- */
- islogical = adapter->logdrv_chan[cmd->device->channel];
- if( cmd->cmnd[0] == INQUIRY && !islogical ) {
- sgl = scsi_sglist(cmd);
- if( sg_page(sgl) ) {
- c = *(unsigned char *) sg_virt(&sgl[0]);
- } else {
- dev_warn(&adapter->dev->dev, "invalid sg\n");
- c = 0;
- }
- if(IS_RAID_CH(adapter, cmd->device->channel) &&
- ((c & 0x1F ) == TYPE_DISK)) {
- status = 0xF0;
- }
- }
- /* clear result; otherwise, success returns corrupt value */
- cmd->result = 0;
- /* Convert MegaRAID status to Linux error code */
- switch (status) {
- case 0x00: /* SUCCESS , i.e. SCSI_STATUS_GOOD */
- cmd->result |= (DID_OK << 16);
- break;
- case 0x02: /* ERROR_ABORTED, i.e.
- SCSI_STATUS_CHECK_CONDITION */
- /* set sense_buffer and result fields */
- if( mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU ||
- mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU64 ) {
- memcpy(cmd->sense_buffer, pthru->reqsensearea,
- 14);
- cmd->result = (DRIVER_SENSE << 24) |
- (DID_OK << 16) |
- (CHECK_CONDITION << 1);
- }
- else {
- if (mbox->m_out.cmd == MEGA_MBOXCMD_EXTPTHRU) {
- memcpy(cmd->sense_buffer,
- epthru->reqsensearea, 14);
- cmd->result = (DRIVER_SENSE << 24) |
- (DID_OK << 16) |
- (CHECK_CONDITION << 1);
- } else {
- cmd->sense_buffer[0] = 0x70;
- cmd->sense_buffer[2] = ABORTED_COMMAND;
- cmd->result |= (CHECK_CONDITION << 1);
- }
- }
- break;
- case 0x08: /* ERR_DEST_DRIVE_FAILED, i.e.
- SCSI_STATUS_BUSY */
- cmd->result |= (DID_BUS_BUSY << 16) | status;
- break;
- default:
- #if MEGA_HAVE_CLUSTERING
- /*
- * If TEST_UNIT_READY fails, we know
- * MEGA_RESERVATION_STATUS failed
- */
- if( cmd->cmnd[0] == TEST_UNIT_READY ) {
- cmd->result |= (DID_ERROR << 16) |
- (RESERVATION_CONFLICT << 1);
- }
- else
- /*
- * Error code returned is 1 if Reserve or Release
- * failed or the input parameter is invalid
- */
- if( status == 1 &&
- (cmd->cmnd[0] == RESERVE ||
- cmd->cmnd[0] == RELEASE) ) {
- cmd->result |= (DID_ERROR << 16) |
- (RESERVATION_CONFLICT << 1);
- }
- else
- #endif
- cmd->result |= (DID_BAD_TARGET << 16)|status;
- }
- mega_free_scb(adapter, scb);
- /* Add Scsi_Command to end of completed queue */
- list_add_tail(SCSI_LIST(cmd), &adapter->completed_list);
- }
- }
- /*
- * mega_runpendq()
- *
- * Run through the list of completed requests and finish it
- */
- static void
- mega_rundoneq (adapter_t *adapter)
- {
- struct scsi_cmnd *cmd;
- struct list_head *pos;
- list_for_each(pos, &adapter->completed_list) {
- struct scsi_pointer* spos = (struct scsi_pointer *)pos;
- cmd = list_entry(spos, struct scsi_cmnd, SCp);
- cmd->scsi_done(cmd);
- }
- INIT_LIST_HEAD(&adapter->completed_list);
- }
- /*
- * Free a SCB structure
- * Note: We assume the scsi commands associated with this scb is not free yet.
- */
- static void
- mega_free_scb(adapter_t *adapter, scb_t *scb)
- {
- switch( scb->dma_type ) {
- case MEGA_DMA_TYPE_NONE:
- break;
- case MEGA_SGLIST:
- scsi_dma_unmap(scb->cmd);
- break;
- default:
- break;
- }
- /*
- * Remove from the pending list
- */
- list_del_init(&scb->list);
- /* Link the scb back into free list */
- scb->state = SCB_FREE;
- scb->cmd = NULL;
- list_add(&scb->list, &adapter->free_list);
- }
- static int
- __mega_busywait_mbox (adapter_t *adapter)
- {
- volatile mbox_t *mbox = adapter->mbox;
- long counter;
- for (counter = 0; counter < 10000; counter++) {
- if (!mbox->m_in.busy)
- return 0;
- udelay(100);
- cond_resched();
- }
- return -1; /* give up after 1 second */
- }
- /*
- * Copies data to SGLIST
- * Note: For 64 bit cards, we need a minimum of one SG element for read/write
- */
- static int
- mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len)
- {
- struct scatterlist *sg;
- struct scsi_cmnd *cmd;
- int sgcnt;
- int idx;
- cmd = scb->cmd;
- /*
- * Copy Scatter-Gather list info into controller structure.
- *
- * The number of sg elements returned must not exceed our limit
- */
- sgcnt = scsi_dma_map(cmd);
- scb->dma_type = MEGA_SGLIST;
- BUG_ON(sgcnt > adapter->sglen || sgcnt < 0);
- *len = 0;
- if (scsi_sg_count(cmd) == 1 && !adapter->has_64bit_addr) {
- sg = scsi_sglist(cmd);
- scb->dma_h_bulkdata = sg_dma_address(sg);
- *buf = (u32)scb->dma_h_bulkdata;
- *len = sg_dma_len(sg);
- return 0;
- }
- scsi_for_each_sg(cmd, sg, sgcnt, idx) {
- if (adapter->has_64bit_addr) {
- scb->sgl64[idx].address = sg_dma_address(sg);
- *len += scb->sgl64[idx].length = sg_dma_len(sg);
- } else {
- scb->sgl[idx].address = sg_dma_address(sg);
- *len += scb->sgl[idx].length = sg_dma_len(sg);
- }
- }
- /* Reset pointer and length fields */
- *buf = scb->sgl_dma_addr;
- /* Return count of SG requests */
- return sgcnt;
- }
- /*
- * mega_8_to_40ld()
- *
- * takes all info in AdapterInquiry structure and puts it into ProductInfo and
- * Enquiry3 structures for later use
- */
- static void
- mega_8_to_40ld(mraid_inquiry *inquiry, mega_inquiry3 *enquiry3,
- mega_product_info *product_info)
- {
- int i;
- product_info->max_commands = inquiry->adapter_info.max_commands;
- enquiry3->rebuild_rate = inquiry->adapter_info.rebuild_rate;
- product_info->nchannels = inquiry->adapter_info.nchannels;
- for (i = 0; i < 4; i++) {
- product_info->fw_version[i] =
- inquiry->adapter_info.fw_version[i];
- product_info->bios_version[i] =
- inquiry->adapter_info.bios_version[i];
- }
- enquiry3->cache_flush_interval =
- inquiry->adapter_info.cache_flush_interval;
- product_info->dram_size = inquiry->adapter_info.dram_size;
- enquiry3->num_ldrv = inquiry->logdrv_info.num_ldrv;
- for (i = 0; i < MAX_LOGICAL_DRIVES_8LD; i++) {
- enquiry3->ldrv_size[i] = inquiry->logdrv_info.ldrv_size[i];
- enquiry3->ldrv_prop[i] = inquiry->logdrv_info.ldrv_prop[i];
- enquiry3->ldrv_state[i] = inquiry->logdrv_info.ldrv_state[i];
- }
- for (i = 0; i < (MAX_PHYSICAL_DRIVES); i++)
- enquiry3->pdrv_state[i] = inquiry->pdrv_info.pdrv_state[i];
- }
- static inline void
- mega_free_sgl(adapter_t *adapter)
- {
- scb_t *scb;
- int i;
- for(i = 0; i < adapter->max_cmds; i++) {
- scb = &adapter->scb_list[i];
- if( scb->sgl64 ) {
- pci_free_consistent(adapter->dev,
- sizeof(mega_sgl64) * adapter->sglen,
- scb->sgl64,
- scb->sgl_dma_addr);
- scb->sgl64 = NULL;
- }
- if( scb->pthru ) {
- pci_free_consistent(adapter->dev, sizeof(mega_passthru),
- scb->pthru, scb->pthru_dma_addr);
- scb->pthru = NULL;
- }
- if( scb->epthru ) {
- pci_free_consistent(adapter->dev,
- sizeof(mega_ext_passthru),
- scb->epthru, scb->epthru_dma_addr);
- scb->epthru = NULL;
- }
- }
- }
- /*
- * Get information about the card/driver
- */
- const char *
- megaraid_info(struct Scsi_Host *host)
- {
- static char buffer[512];
- adapter_t *adapter;
- adapter = (adapter_t *)host->hostdata;
- sprintf (buffer,
- "LSI Logic MegaRAID %s %d commands %d targs %d chans %d luns",
- adapter->fw_version, adapter->product_info.max_commands,
- adapter->host->max_id, adapter->host->max_channel,
- (u32)adapter->host->max_lun);
- return buffer;
- }
- /*
- * Abort a previous SCSI request. Only commands on the pending list can be
- * aborted. All the commands issued to the F/W must complete.
- */
- static int
- megaraid_abort(struct scsi_cmnd *cmd)
- {
- adapter_t *adapter;
- int rval;
- adapter = (adapter_t *)cmd->device->host->hostdata;
- rval = megaraid_abort_and_reset(adapter, cmd, SCB_ABORT);
- /*
- * This is required here to complete any completed requests
- * to be communicated over to the mid layer.
- */
- mega_rundoneq(adapter);
- return rval;
- }
- static int
- megaraid_reset(struct scsi_cmnd *cmd)
- {
- adapter_t *adapter;
- megacmd_t mc;
- int rval;
- adapter = (adapter_t *)cmd->device->host->hostdata;
- #if MEGA_HAVE_CLUSTERING
- mc.cmd = MEGA_CLUSTER_CMD;
- mc.opcode = MEGA_RESET_RESERVATIONS;
- if( mega_internal_command(adapter, &mc, NULL) != 0 ) {
- dev_warn(&adapter->dev->dev, "reservation reset failed\n");
- }
- else {
- dev_info(&adapter->dev->dev, "reservation reset\n");
- }
- #endif
- spin_lock_irq(&adapter->lock);
- rval = megaraid_abort_and_reset(adapter, cmd, SCB_RESET);
- /*
- * This is required here to complete any completed requests
- * to be communicated over to the mid layer.
- */
- mega_rundoneq(adapter);
- spin_unlock_irq(&adapter->lock);
- return rval;
- }
- /**
- * megaraid_abort_and_reset()
- * @adapter - megaraid soft state
- * @cmd - scsi command to be aborted or reset
- * @aor - abort or reset flag
- *
- * Try to locate the scsi command in the pending queue. If found and is not
- * issued to the controller, abort/reset it. Otherwise return failure
- */
- static int
- megaraid_abort_and_reset(adapter_t *adapter, struct scsi_cmnd *cmd, int aor)
- {
- struct list_head *pos, *next;
- scb_t *scb;
- dev_warn(&adapter->dev->dev, "%s cmd=%x <c=%d t=%d l=%d>\n",
- (aor == SCB_ABORT)? "ABORTING":"RESET",
- cmd->cmnd[0], cmd->device->channel,
- cmd->device->id, (u32)cmd->device->lun);
- if(list_empty(&adapter->pending_list))
- return FAILED;
- list_for_each_safe(pos, next, &adapter->pending_list) {
- scb = list_entry(pos, scb_t, list);
- if (scb->cmd == cmd) { /* Found command */
- scb->state |= aor;
- /*
- * Check if this command has firmware ownership. If
- * yes, we cannot reset this command. Whenever f/w
- * completes this command, we will return appropriate
- * status from ISR.
- */
- if( scb->state & SCB_ISSUED ) {
- dev_warn(&adapter->dev->dev,
- "%s[%x], fw owner\n",
- (aor==SCB_ABORT) ? "ABORTING":"RESET",
- scb->idx);
- return FAILED;
- }
- else {
- /*
- * Not yet issued! Remove from the pending
- * list
- */
- dev_warn(&adapter->dev->dev,
- "%s-[%x], driver owner\n",
- (aor==SCB_ABORT) ? "ABORTING":"RESET",
- scb->idx);
- mega_free_scb(adapter, scb);
- if( aor == SCB_ABORT ) {
- cmd->result = (DID_ABORT << 16);
- }
- else {
- cmd->result = (DID_RESET << 16);
- }
- list_add_tail(SCSI_LIST(cmd),
- &adapter->completed_list);
- return SUCCESS;
- }
- }
- }
- return FAILED;
- }
- static inline int
- make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
- {
- *pdev = pci_alloc_dev(NULL);
- if( *pdev == NULL ) return -1;
- memcpy(*pdev, adapter->dev, sizeof(struct pci_dev));
- if( pci_set_dma_mask(*pdev, DMA_BIT_MASK(32)) != 0 ) {
- kfree(*pdev);
- return -1;
- }
- return 0;
- }
- static inline void
- free_local_pdev(struct pci_dev *pdev)
- {
- kfree(pdev);
- }
- /**
- * mega_allocate_inquiry()
- * @dma_handle - handle returned for dma address
- * @pdev - handle to pci device
- *
- * allocates memory for inquiry structure
- */
- static inline void *
- mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev)
- {
- return pci_alloc_consistent(pdev, sizeof(mega_inquiry3), dma_handle);
- }
- static inline void
- mega_free_inquiry(void *inquiry, dma_addr_t dma_handle, struct pci_dev *pdev)
- {
- pci_free_consistent(pdev, sizeof(mega_inquiry3), inquiry, dma_handle);
- }
- #ifdef CONFIG_PROC_FS
- /* Following code handles /proc fs */
- /**
- * proc_show_config()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display configuration information about the controller.
- */
- static int
- proc_show_config(struct seq_file *m, void *v)
- {
- adapter_t *adapter = m->private;
- seq_puts(m, MEGARAID_VERSION);
- if(adapter->product_info.product_name[0])
- seq_printf(m, "%s\n", adapter->product_info.product_name);
- seq_puts(m, "Controller Type: ");
- if( adapter->flag & BOARD_MEMMAP )
- seq_puts(m, "438/466/467/471/493/518/520/531/532\n");
- else
- seq_puts(m, "418/428/434\n");
- if(adapter->flag & BOARD_40LD)
- seq_puts(m, "Controller Supports 40 Logical Drives\n");
- if(adapter->flag & BOARD_64BIT)
- seq_puts(m, "Controller capable of 64-bit memory addressing\n");
- if( adapter->has_64bit_addr )
- seq_puts(m, "Controller using 64-bit memory addressing\n");
- else
- seq_puts(m, "Controller is not using 64-bit memory addressing\n");
- seq_printf(m, "Base = %08lx, Irq = %d, ",
- adapter->base, adapter->host->irq);
- seq_printf(m, "Logical Drives = %d, Channels = %d\n",
- adapter->numldrv, adapter->product_info.nchannels);
- seq_printf(m, "Version =%s:%s, DRAM = %dMb\n",
- adapter->fw_version, adapter->bios_version,
- adapter->product_info.dram_size);
- seq_printf(m, "Controller Queue Depth = %d, Driver Queue Depth = %d\n",
- adapter->product_info.max_commands, adapter->max_cmds);
- seq_printf(m, "support_ext_cdb = %d\n", adapter->support_ext_cdb);
- seq_printf(m, "support_random_del = %d\n", adapter->support_random_del);
- seq_printf(m, "boot_ldrv_enabled = %d\n", adapter->boot_ldrv_enabled);
- seq_printf(m, "boot_ldrv = %d\n", adapter->boot_ldrv);
- seq_printf(m, "boot_pdrv_enabled = %d\n", adapter->boot_pdrv_enabled);
- seq_printf(m, "boot_pdrv_ch = %d\n", adapter->boot_pdrv_ch);
- seq_printf(m, "boot_pdrv_tgt = %d\n", adapter->boot_pdrv_tgt);
- seq_printf(m, "quiescent = %d\n",
- atomic_read(&adapter->quiescent));
- seq_printf(m, "has_cluster = %d\n", adapter->has_cluster);
- seq_puts(m, "\nModule Parameters:\n");
- seq_printf(m, "max_cmd_per_lun = %d\n", max_cmd_per_lun);
- seq_printf(m, "max_sectors_per_io = %d\n", max_sectors_per_io);
- return 0;
- }
- /**
- * proc_show_stat()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display statistical information about the I/O activity.
- */
- static int
- proc_show_stat(struct seq_file *m, void *v)
- {
- adapter_t *adapter = m->private;
- #if MEGA_HAVE_STATS
- int i;
- #endif
- seq_puts(m, "Statistical Information for this controller\n");
- seq_printf(m, "pend_cmds = %d\n", atomic_read(&adapter->pend_cmds));
- #if MEGA_HAVE_STATS
- for(i = 0; i < adapter->numldrv; i++) {
- seq_printf(m, "Logical Drive %d:\n", i);
- seq_printf(m, "\tReads Issued = %lu, Writes Issued = %lu\n",
- adapter->nreads[i], adapter->nwrites[i]);
- seq_printf(m, "\tSectors Read = %lu, Sectors Written = %lu\n",
- adapter->nreadblocks[i], adapter->nwriteblocks[i]);
- seq_printf(m, "\tRead errors = %lu, Write errors = %lu\n\n",
- adapter->rd_errors[i], adapter->wr_errors[i]);
- }
- #else
- seq_puts(m, "IO and error counters not compiled in driver.\n");
- #endif
- return 0;
- }
- /**
- * proc_show_mbox()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display mailbox information for the last command issued. This information
- * is good for debugging.
- */
- static int
- proc_show_mbox(struct seq_file *m, void *v)
- {
- adapter_t *adapter = m->private;
- volatile mbox_t *mbox = adapter->mbox;
- seq_puts(m, "Contents of Mail Box Structure\n");
- seq_printf(m, " Fw Command = 0x%02x\n", mbox->m_out.cmd);
- seq_printf(m, " Cmd Sequence = 0x%02x\n", mbox->m_out.cmdid);
- seq_printf(m, " No of Sectors= %04d\n", mbox->m_out.numsectors);
- seq_printf(m, " LBA = 0x%02x\n", mbox->m_out.lba);
- seq_printf(m, " DTA = 0x%08x\n", mbox->m_out.xferaddr);
- seq_printf(m, " Logical Drive= 0x%02x\n", mbox->m_out.logdrv);
- seq_printf(m, " No of SG Elmt= 0x%02x\n", mbox->m_out.numsgelements);
- seq_printf(m, " Busy = %01x\n", mbox->m_in.busy);
- seq_printf(m, " Status = 0x%02x\n", mbox->m_in.status);
- return 0;
- }
- /**
- * proc_show_rebuild_rate()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display current rebuild rate
- */
- static int
- proc_show_rebuild_rate(struct seq_file *m, void *v)
- {
- adapter_t *adapter = m->private;
- dma_addr_t dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
- if( make_local_pdev(adapter, &pdev) != 0 )
- return 0;
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
- goto free_pdev;
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
- seq_puts(m, "Adapter inquiry failed.\n");
- dev_warn(&adapter->dev->dev, "inquiry failed\n");
- goto free_inquiry;
- }
- if( adapter->flag & BOARD_40LD )
- seq_printf(m, "Rebuild Rate: [%d%%]\n",
- ((mega_inquiry3 *)inquiry)->rebuild_rate);
- else
- seq_printf(m, "Rebuild Rate: [%d%%]\n",
- ((mraid_ext_inquiry *)
- inquiry)->raid_inq.adapter_info.rebuild_rate);
- free_inquiry:
- mega_free_inquiry(inquiry, dma_handle, pdev);
- free_pdev:
- free_local_pdev(pdev);
- return 0;
- }
- /**
- * proc_show_battery()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the battery module on the controller.
- */
- static int
- proc_show_battery(struct seq_file *m, void *v)
- {
- adapter_t *adapter = m->private;
- dma_addr_t dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
- u8 battery_status;
- if( make_local_pdev(adapter, &pdev) != 0 )
- return 0;
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
- goto free_pdev;
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
- seq_puts(m, "Adapter inquiry failed.\n");
- dev_warn(&adapter->dev->dev, "inquiry failed\n");
- goto free_inquiry;
- }
- if( adapter->flag & BOARD_40LD ) {
- battery_status = ((mega_inquiry3 *)inquiry)->battery_status;
- }
- else {
- battery_status = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.adapter_info.battery_status;
- }
- /*
- * Decode the battery status
- */
- seq_printf(m, "Battery Status:[%d]", battery_status);
- if(battery_status == MEGA_BATT_CHARGE_DONE)
- seq_puts(m, " Charge Done");
- if(battery_status & MEGA_BATT_MODULE_MISSING)
- seq_puts(m, " Module Missing");
-
- if(battery_status & MEGA_BATT_LOW_VOLTAGE)
- seq_puts(m, " Low Voltage");
-
- if(battery_status & MEGA_BATT_TEMP_HIGH)
- seq_puts(m, " Temperature High");
-
- if(battery_status & MEGA_BATT_PACK_MISSING)
- seq_puts(m, " Pack Missing");
-
- if(battery_status & MEGA_BATT_CHARGE_INPROG)
- seq_puts(m, " Charge In-progress");
-
- if(battery_status & MEGA_BATT_CHARGE_FAIL)
- seq_puts(m, " Charge Fail");
-
- if(battery_status & MEGA_BATT_CYCLES_EXCEEDED)
- seq_puts(m, " Cycles Exceeded");
- seq_putc(m, '\n');
- free_inquiry:
- mega_free_inquiry(inquiry, dma_handle, pdev);
- free_pdev:
- free_local_pdev(pdev);
- return 0;
- }
- /*
- * Display scsi inquiry
- */
- static void
- mega_print_inquiry(struct seq_file *m, char *scsi_inq)
- {
- int i;
- seq_puts(m, " Vendor: ");
- seq_write(m, scsi_inq + 8, 8);
- seq_puts(m, " Model: ");
- seq_write(m, scsi_inq + 16, 16);
- seq_puts(m, " Rev: ");
- seq_write(m, scsi_inq + 32, 4);
- seq_putc(m, '\n');
- i = scsi_inq[0] & 0x1f;
- seq_printf(m, " Type: %s ", scsi_device_type(i));
- seq_printf(m, " ANSI SCSI revision: %02x",
- scsi_inq[2] & 0x07);
- if( (scsi_inq[2] & 0x07) == 1 && (scsi_inq[3] & 0x0f) == 1 )
- seq_puts(m, " CCS\n");
- else
- seq_putc(m, '\n');
- }
- /**
- * proc_show_pdrv()
- * @m - Synthetic file construction data
- * @page - buffer to write the data in
- * @adapter - pointer to our soft state
- *
- * Display information about the physical drives.
- */
- static int
- proc_show_pdrv(struct seq_file *m, adapter_t *adapter, int channel)
- {
- dma_addr_t dma_handle;
- char *scsi_inq;
- dma_addr_t scsi_inq_dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
- u8 *pdrv_state;
- u8 state;
- int tgt;
- int max_channels;
- int i;
- if( make_local_pdev(adapter, &pdev) != 0 )
- return 0;
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
- goto free_pdev;
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
- seq_puts(m, "Adapter inquiry failed.\n");
- dev_warn(&adapter->dev->dev, "inquiry failed\n");
- goto free_inquiry;
- }
- scsi_inq = pci_alloc_consistent(pdev, 256, &scsi_inq_dma_handle);
- if( scsi_inq == NULL ) {
- seq_puts(m, "memory not available for scsi inq.\n");
- goto free_inquiry;
- }
- if( adapter->flag & BOARD_40LD ) {
- pdrv_state = ((mega_inquiry3 *)inquiry)->pdrv_state;
- }
- else {
- pdrv_state = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.pdrv_info.pdrv_state;
- }
- max_channels = adapter->product_info.nchannels;
- if( channel >= max_channels ) {
- goto free_pci;
- }
- for( tgt = 0; tgt <= MAX_TARGET; tgt++ ) {
- i = channel*16 + tgt;
- state = *(pdrv_state + i);
- switch( state & 0x0F ) {
- case PDRV_ONLINE:
- seq_printf(m, "Channel:%2d Id:%2d State: Online",
- channel, tgt);
- break;
- case PDRV_FAILED:
- seq_printf(m, "Channel:%2d Id:%2d State: Failed",
- channel, tgt);
- break;
- case PDRV_RBLD:
- seq_printf(m, "Channel:%2d Id:%2d State: Rebuild",
- channel, tgt);
- break;
- case PDRV_HOTSPARE:
- seq_printf(m, "Channel:%2d Id:%2d State: Hot spare",
- channel, tgt);
- break;
- default:
- seq_printf(m, "Channel:%2d Id:%2d State: Un-configured",
- channel, tgt);
- break;
- }
- /*
- * This interface displays inquiries for disk drives
- * only. Inquries for logical drives and non-disk
- * devices are available through /proc/scsi/scsi
- */
- memset(scsi_inq, 0, 256);
- if( mega_internal_dev_inquiry(adapter, channel, tgt,
- scsi_inq_dma_handle) ||
- (scsi_inq[0] & 0x1F) != TYPE_DISK ) {
- continue;
- }
- /*
- * Check for overflow. We print less than 240
- * characters for inquiry
- */
- seq_puts(m, ".\n");
- mega_print_inquiry(m, scsi_inq);
- }
- free_pci:
- pci_free_consistent(pdev, 256, scsi_inq, scsi_inq_dma_handle);
- free_inquiry:
- mega_free_inquiry(inquiry, dma_handle, pdev);
- free_pdev:
- free_local_pdev(pdev);
- return 0;
- }
- /**
- * proc_show_pdrv_ch0()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 0.
- */
- static int
- proc_show_pdrv_ch0(struct seq_file *m, void *v)
- {
- return proc_show_pdrv(m, m->private, 0);
- }
- /**
- * proc_show_pdrv_ch1()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 1.
- */
- static int
- proc_show_pdrv_ch1(struct seq_file *m, void *v)
- {
- return proc_show_pdrv(m, m->private, 1);
- }
- /**
- * proc_show_pdrv_ch2()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 2.
- */
- static int
- proc_show_pdrv_ch2(struct seq_file *m, void *v)
- {
- return proc_show_pdrv(m, m->private, 2);
- }
- /**
- * proc_show_pdrv_ch3()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 3.
- */
- static int
- proc_show_pdrv_ch3(struct seq_file *m, void *v)
- {
- return proc_show_pdrv(m, m->private, 3);
- }
- /**
- * proc_show_rdrv()
- * @m - Synthetic file construction data
- * @adapter - pointer to our soft state
- * @start - starting logical drive to display
- * @end - ending logical drive to display
- *
- * We do not print the inquiry information since its already available through
- * /proc/scsi/scsi interface
- */
- static int
- proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end )
- {
- dma_addr_t dma_handle;
- logdrv_param *lparam;
- megacmd_t mc;
- char *disk_array;
- dma_addr_t disk_array_dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
- u8 *rdrv_state;
- int num_ldrv;
- u32 array_sz;
- int i;
- if( make_local_pdev(adapter, &pdev) != 0 )
- return 0;
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
- goto free_pdev;
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
- seq_puts(m, "Adapter inquiry failed.\n");
- dev_warn(&adapter->dev->dev, "inquiry failed\n");
- goto free_inquiry;
- }
- memset(&mc, 0, sizeof(megacmd_t));
- if( adapter->flag & BOARD_40LD ) {
- array_sz = sizeof(disk_array_40ld);
- rdrv_state = ((mega_inquiry3 *)inquiry)->ldrv_state;
- num_ldrv = ((mega_inquiry3 *)inquiry)->num_ldrv;
- }
- else {
- array_sz = sizeof(disk_array_8ld);
- rdrv_state = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.logdrv_info.ldrv_state;
- num_ldrv = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.logdrv_info.num_ldrv;
- }
- disk_array = pci_alloc_consistent(pdev, array_sz,
- &disk_array_dma_handle);
- if( disk_array == NULL ) {
- seq_puts(m, "memory not available.\n");
- goto free_inquiry;
- }
- mc.xferaddr = (u32)disk_array_dma_handle;
- if( adapter->flag & BOARD_40LD ) {
- mc.cmd = FC_NEW_CONFIG;
- mc.opcode = OP_DCMD_READ_CONFIG;
- if( mega_internal_command(adapter, &mc, NULL) ) {
- seq_puts(m, "40LD read config failed.\n");
- goto free_pci;
- }
- }
- else {
- mc.cmd = NEW_READ_CONFIG_8LD;
- if( mega_internal_command(adapter, &mc, NULL) ) {
- mc.cmd = READ_CONFIG_8LD;
- if( mega_internal_command(adapter, &mc, NULL) ) {
- seq_puts(m, "8LD read config failed.\n");
- goto free_pci;
- }
- }
- }
- for( i = start; i < ( (end+1 < num_ldrv) ? end+1 : num_ldrv ); i++ ) {
- if( adapter->flag & BOARD_40LD ) {
- lparam =
- &((disk_array_40ld *)disk_array)->ldrv[i].lparam;
- }
- else {
- lparam =
- &((disk_array_8ld *)disk_array)->ldrv[i].lparam;
- }
- /*
- * Check for overflow. We print less than 240 characters for
- * information about each logical drive.
- */
- seq_printf(m, "Logical drive:%2d:, ", i);
- switch( rdrv_state[i] & 0x0F ) {
- case RDRV_OFFLINE:
- seq_puts(m, "state: offline");
- break;
- case RDRV_DEGRADED:
- seq_puts(m, "state: degraded");
- break;
- case RDRV_OPTIMAL:
- seq_puts(m, "state: optimal");
- break;
- case RDRV_DELETED:
- seq_puts(m, "state: deleted");
- break;
- default:
- seq_puts(m, "state: unknown");
- break;
- }
- /*
- * Check if check consistency or initialization is going on
- * for this logical drive.
- */
- if( (rdrv_state[i] & 0xF0) == 0x20 )
- seq_puts(m, ", check-consistency in progress");
- else if( (rdrv_state[i] & 0xF0) == 0x10 )
- seq_puts(m, ", initialization in progress");
-
- seq_putc(m, '\n');
- seq_printf(m, "Span depth:%3d, ", lparam->span_depth);
- seq_printf(m, "RAID level:%3d, ", lparam->level);
- seq_printf(m, "Stripe size:%3d, ",
- lparam->stripe_sz ? lparam->stripe_sz/2: 128);
- seq_printf(m, "Row size:%3d\n", lparam->row_size);
- seq_puts(m, "Read Policy: ");
- switch(lparam->read_ahead) {
- case NO_READ_AHEAD:
- seq_puts(m, "No read ahead, ");
- break;
- case READ_AHEAD:
- seq_puts(m, "Read ahead, ");
- break;
- case ADAP_READ_AHEAD:
- seq_puts(m, "Adaptive, ");
- break;
- }
- seq_puts(m, "Write Policy: ");
- switch(lparam->write_mode) {
- case WRMODE_WRITE_THRU:
- seq_puts(m, "Write thru, ");
- break;
- case WRMODE_WRITE_BACK:
- seq_puts(m, "Write back, ");
- break;
- }
- seq_puts(m, "Cache Policy: ");
- switch(lparam->direct_io) {
- case CACHED_IO:
- seq_puts(m, "Cached IO\n\n");
- break;
- case DIRECT_IO:
- seq_puts(m, "Direct IO\n\n");
- break;
- }
- }
- free_pci:
- pci_free_consistent(pdev, array_sz, disk_array,
- disk_array_dma_handle);
- free_inquiry:
- mega_free_inquiry(inquiry, dma_handle, pdev);
- free_pdev:
- free_local_pdev(pdev);
- return 0;
- }
- /**
- * proc_show_rdrv_10()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
- static int
- proc_show_rdrv_10(struct seq_file *m, void *v)
- {
- return proc_show_rdrv(m, m->private, 0, 9);
- }
- /**
- * proc_show_rdrv_20()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
- static int
- proc_show_rdrv_20(struct seq_file *m, void *v)
- {
- return proc_show_rdrv(m, m->private, 10, 19);
- }
- /**
- * proc_show_rdrv_30()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
- static int
- proc_show_rdrv_30(struct seq_file *m, void *v)
- {
- return proc_show_rdrv(m, m->private, 20, 29);
- }
- /**
- * proc_show_rdrv_40()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
- static int
- proc_show_rdrv_40(struct seq_file *m, void *v)
- {
- return proc_show_rdrv(m, m->private, 30, 39);
- }
- /**
- * mega_create_proc_entry()
- * @index - index in soft state array
- * @parent - parent node for this /proc entry
- *
- * Creates /proc entries for our controllers.
- */
- static void
- mega_create_proc_entry(int index, struct proc_dir_entry *parent)
- {
- adapter_t *adapter = hba_soft_state[index];
- struct proc_dir_entry *dir;
- u8 string[16];
- sprintf(string, "hba%d", adapter->host->host_no);
- dir = proc_mkdir_data(string, 0, parent, adapter);
- if (!dir) {
- dev_warn(&adapter->dev->dev, "proc_mkdir failed\n");
- return;
- }
- proc_create_single_data("config", S_IRUSR, dir,
- proc_show_config, adapter);
- proc_create_single_data("stat", S_IRUSR, dir,
- proc_show_stat, adapter);
- proc_create_single_data("mailbox", S_IRUSR, dir,
- proc_show_mbox, adapter);
- #if MEGA_HAVE_ENH_PROC
- proc_create_single_data("rebuild-rate", S_IRUSR, dir,
- proc_show_rebuild_rate, adapter);
- proc_create_single_data("battery-status", S_IRUSR, dir,
- proc_show_battery, adapter);
- proc_create_single_data("diskdrives-ch0", S_IRUSR, dir,
- proc_show_pdrv_ch0, adapter);
- proc_create_single_data("diskdrives-ch1", S_IRUSR, dir,
- proc_show_pdrv_ch1, adapter);
- proc_create_single_data("diskdrives-ch2", S_IRUSR, dir,
- proc_show_pdrv_ch2, adapter);
- proc_create_single_data("diskdrives-ch3", S_IRUSR, dir,
- proc_show_pdrv_ch3, adapter);
- proc_create_single_data("raiddrives-0-9", S_IRUSR, dir,
- proc_show_rdrv_10, adapter);
- proc_create_single_data("raiddrives-10-19", S_IRUSR, dir,
- proc_show_rdrv_20, adapter);
- proc_create_single_data("raiddrives-20-29", S_IRUSR, dir,
- proc_show_rdrv_30, adapter);
- proc_create_single_data("raiddrives-30-39", S_IRUSR, dir,
- proc_show_rdrv_40, adapter);
- #endif
- }
- #else
- static inline void mega_create_proc_entry(int index, struct proc_dir_entry *parent)
- {
- }
- #endif
- /**
- * megaraid_biosparam()
- *
- * Return the disk geometry for a particular disk
- */
- static int
- megaraid_biosparam(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int geom[])
- {
- adapter_t *adapter;
- unsigned char *bh;
- int heads;
- int sectors;
- int cylinders;
- int rval;
- /* Get pointer to host config structure */
- adapter = (adapter_t *)sdev->host->hostdata;
- if (IS_RAID_CH(adapter, sdev->channel)) {
- /* Default heads (64) & sectors (32) */
- heads = 64;
- sectors = 32;
- cylinders = (ulong)capacity / (heads * sectors);
- /*
- * Handle extended translation size for logical drives
- * > 1Gb
- */
- if ((ulong)capacity >= 0x200000) {
- heads = 255;
- sectors = 63;
- cylinders = (ulong)capacity / (heads * sectors);
- }
- /* return result */
- geom[0] = heads;
- geom[1] = sectors;
- geom[2] = cylinders;
- }
- else {
- bh = scsi_bios_ptable(bdev);
- if( bh ) {
- rval = scsi_partsize(bh, capacity,
- &geom[2], &geom[0], &geom[1]);
- kfree(bh);
- if( rval != -1 )
- return rval;
- }
- dev_info(&adapter->dev->dev,
- "invalid partition on this disk on channel %d\n",
- sdev->channel);
- /* Default heads (64) & sectors (32) */
- heads = 64;
- sectors = 32;
- cylinders = (ulong)capacity / (heads * sectors);
- /* Handle extended translation size for logical drives > 1Gb */
- if ((ulong)capacity >= 0x200000) {
- heads = 255;
- sectors = 63;
- cylinders = (ulong)capacity / (heads * sectors);
- }
- /* return result */
- geom[0] = heads;
- geom[1] = sectors;
- geom[2] = cylinders;
- }
- return 0;
- }
- /**
- * mega_init_scb()
- * @adapter - pointer to our soft state
- *
- * Allocate memory for the various pointers in the scb structures:
- * scatter-gather list pointer, passthru and extended passthru structure
- * pointers.
- */
- static int
- mega_init_scb(adapter_t *adapter)
- {
- scb_t *scb;
- int i;
- for( i = 0; i < adapter->max_cmds; i++ ) {
- scb = &adapter->scb_list[i];
- scb->sgl64 = NULL;
- scb->sgl = NULL;
- scb->pthru = NULL;
- scb->epthru = NULL;
- }
- for( i = 0; i < adapter->max_cmds; i++ ) {
- scb = &adapter->scb_list[i];
- scb->idx = i;
- scb->sgl64 = pci_alloc_consistent(adapter->dev,
- sizeof(mega_sgl64) * adapter->sglen,
- &scb->sgl_dma_addr);
- scb->sgl = (mega_sglist *)scb->sgl64;
- if( !scb->sgl ) {
- dev_warn(&adapter->dev->dev, "RAID: Can't allocate sglist\n");
- mega_free_sgl(adapter);
- return -1;
- }
- scb->pthru = pci_alloc_consistent(adapter->dev,
- sizeof(mega_passthru),
- &scb->pthru_dma_addr);
- if( !scb->pthru ) {
- dev_warn(&adapter->dev->dev, "RAID: Can't allocate passthru\n");
- mega_free_sgl(adapter);
- return -1;
- }
- scb->epthru = pci_alloc_consistent(adapter->dev,
- sizeof(mega_ext_passthru),
- &scb->epthru_dma_addr);
- if( !scb->epthru ) {
- dev_warn(&adapter->dev->dev,
- "Can't allocate extended passthru\n");
- mega_free_sgl(adapter);
- return -1;
- }
- scb->dma_type = MEGA_DMA_TYPE_NONE;
- /*
- * Link to free list
- * lock not required since we are loading the driver, so no
- * commands possible right now.
- */
- scb->state = SCB_FREE;
- scb->cmd = NULL;
- list_add(&scb->list, &adapter->free_list);
- }
- return 0;
- }
- /**
- * megadev_open()
- * @inode - unused
- * @filep - unused
- *
- * Routines for the character/ioctl interface to the driver. Find out if this
- * is a valid open.
- */
- static int
- megadev_open (struct inode *inode, struct file *filep)
- {
- /*
- * Only allow superuser to access private ioctl interface
- */
- if( !capable(CAP_SYS_ADMIN) ) return -EACCES;
- return 0;
- }
- /**
- * megadev_ioctl()
- * @inode - Our device inode
- * @filep - unused
- * @cmd - ioctl command
- * @arg - user buffer
- *
- * ioctl entry point for our private ioctl interface. We move the data in from
- * the user space, prepare the command (if necessary, convert the old MIMD
- * ioctl to new ioctl command), and issue a synchronous command to the
- * controller.
- */
- static int
- megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
- {
- adapter_t *adapter;
- nitioctl_t uioc;
- int adapno;
- int rval;
- mega_passthru __user *upthru; /* user address for passthru */
- mega_passthru *pthru; /* copy user passthru here */
- dma_addr_t pthru_dma_hndl;
- void *data = NULL; /* data to be transferred */
- dma_addr_t data_dma_hndl; /* dma handle for data xfer area */
- megacmd_t mc;
- megastat_t __user *ustats;
- int num_ldrv;
- u32 uxferaddr = 0;
- struct pci_dev *pdev;
- ustats = NULL; /* avoid compilation warnings */
- num_ldrv = 0;
- /*
- * Make sure only USCSICMD are issued through this interface.
- * MIMD application would still fire different command.
- */
- if( (_IOC_TYPE(cmd) != MEGAIOC_MAGIC) && (cmd != USCSICMD) ) {
- return -EINVAL;
- }
- /*
- * Check and convert a possible MIMD command to NIT command.
- * mega_m_to_n() copies the data from the user space, so we do not
- * have to do it here.
- * NOTE: We will need some user address to copyout the data, therefore
- * the inteface layer will also provide us with the required user
- * addresses.
- */
- memset(&uioc, 0, sizeof(nitioctl_t));
- if( (rval = mega_m_to_n( (void __user *)arg, &uioc)) != 0 )
- return rval;
- switch( uioc.opcode ) {
- case GET_DRIVER_VER:
- if( put_user(driver_ver, (u32 __user *)uioc.uioc_uaddr) )
- return (-EFAULT);
- break;
- case GET_N_ADAP:
- if( put_user(hba_count, (u32 __user *)uioc.uioc_uaddr) )
- return (-EFAULT);
- /*
- * Shucks. MIMD interface returns a positive value for number
- * of adapters. TODO: Change it to return 0 when there is no
- * applicatio using mimd interface.
- */
- return hba_count;
- case GET_ADAP_INFO:
- /*
- * Which adapter
- */
- if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
- return (-ENODEV);
- if( copy_to_user(uioc.uioc_uaddr, mcontroller+adapno,
- sizeof(struct mcontroller)) )
- return (-EFAULT);
- break;
- #if MEGA_HAVE_STATS
- case GET_STATS:
- /*
- * Which adapter
- */
- if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
- return (-ENODEV);
- adapter = hba_soft_state[adapno];
- ustats = uioc.uioc_uaddr;
- if( copy_from_user(&num_ldrv, &ustats->num_ldrv, sizeof(int)) )
- return (-EFAULT);
- /*
- * Check for the validity of the logical drive number
- */
- if( num_ldrv >= MAX_LOGICAL_DRIVES_40LD ) return -EINVAL;
- if( copy_to_user(ustats->nreads, adapter->nreads,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
- if( copy_to_user(ustats->nreadblocks, adapter->nreadblocks,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
- if( copy_to_user(ustats->nwrites, adapter->nwrites,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
- if( copy_to_user(ustats->nwriteblocks, adapter->nwriteblocks,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
- if( copy_to_user(ustats->rd_errors, adapter->rd_errors,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
- if( copy_to_user(ustats->wr_errors, adapter->wr_errors,
- num_ldrv*sizeof(u32)) )
- return -EFAULT;
- return 0;
- #endif
- case MBOX_CMD:
- /*
- * Which adapter
- */
- if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
- return (-ENODEV);
- adapter = hba_soft_state[adapno];
- /*
- * Deletion of logical drive is a special case. The adapter
- * should be quiescent before this command is issued.
- */
- if( uioc.uioc_rmbox[0] == FC_DEL_LOGDRV &&
- uioc.uioc_rmbox[2] == OP_DEL_LOGDRV ) {
- /*
- * Do we support this feature
- */
- if( !adapter->support_random_del ) {
- dev_warn(&adapter->dev->dev, "logdrv "
- "delete on non-supporting F/W\n");
- return (-EINVAL);
- }
- rval = mega_del_logdrv( adapter, uioc.uioc_rmbox[3] );
- if( rval == 0 ) {
- memset(&mc, 0, sizeof(megacmd_t));
- mc.status = rval;
- rval = mega_n_to_m((void __user *)arg, &mc);
- }
- return rval;
- }
- /*
- * This interface only support the regular passthru commands.
- * Reject extended passthru and 64-bit passthru
- */
- if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU64 ||
- uioc.uioc_rmbox[0] == MEGA_MBOXCMD_EXTPTHRU ) {
- dev_warn(&adapter->dev->dev, "rejected passthru\n");
- return (-EINVAL);
- }
- /*
- * For all internal commands, the buffer must be allocated in
- * <4GB address range
- */
- if( make_local_pdev(adapter, &pdev) != 0 )
- return -EIO;
- /* Is it a passthru command or a DCMD */
- if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU ) {
- /* Passthru commands */
- pthru = pci_alloc_consistent(pdev,
- sizeof(mega_passthru),
- &pthru_dma_hndl);
- if( pthru == NULL ) {
- free_local_pdev(pdev);
- return (-ENOMEM);
- }
- /*
- * The user passthru structure
- */
- upthru = (mega_passthru __user *)(unsigned long)MBOX(uioc)->xferaddr;
- /*
- * Copy in the user passthru here.
- */
- if( copy_from_user(pthru, upthru,
- sizeof(mega_passthru)) ) {
- pci_free_consistent(pdev,
- sizeof(mega_passthru), pthru,
- pthru_dma_hndl);
- free_local_pdev(pdev);
- return (-EFAULT);
- }
- /*
- * Is there a data transfer
- */
- if( pthru->dataxferlen ) {
- data = pci_alloc_consistent(pdev,
- pthru->dataxferlen,
- &data_dma_hndl);
- if( data == NULL ) {
- pci_free_consistent(pdev,
- sizeof(mega_passthru),
- pthru,
- pthru_dma_hndl);
- free_local_pdev(pdev);
- return (-ENOMEM);
- }
- /*
- * Save the user address and point the kernel
- * address at just allocated memory
- */
- uxferaddr = pthru->dataxferaddr;
- pthru->dataxferaddr = data_dma_hndl;
- }
- /*
- * Is data coming down-stream
- */
- if( pthru->dataxferlen && (uioc.flags & UIOC_WR) ) {
- /*
- * Get the user data
- */
- if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr,
- pthru->dataxferlen) ) {
- rval = (-EFAULT);
- goto freemem_and_return;
- }
- }
- memset(&mc, 0, sizeof(megacmd_t));
- mc.cmd = MEGA_MBOXCMD_PASSTHRU;
- mc.xferaddr = (u32)pthru_dma_hndl;
- /*
- * Issue the command
- */
- mega_internal_command(adapter, &mc, pthru);
- rval = mega_n_to_m((void __user *)arg, &mc);
- if( rval ) goto freemem_and_return;
- /*
- * Is data going up-stream
- */
- if( pthru->dataxferlen && (uioc.flags & UIOC_RD) ) {
- if( copy_to_user((char __user *)(unsigned long) uxferaddr, data,
- pthru->dataxferlen) ) {
- rval = (-EFAULT);
- }
- }
- /*
- * Send the request sense data also, irrespective of
- * whether the user has asked for it or not.
- */
- if (copy_to_user(upthru->reqsensearea,
- pthru->reqsensearea, 14))
- rval = -EFAULT;
- freemem_and_return:
- if( pthru->dataxferlen ) {
- pci_free_consistent(pdev,
- pthru->dataxferlen, data,
- data_dma_hndl);
- }
- pci_free_consistent(pdev, sizeof(mega_passthru),
- pthru, pthru_dma_hndl);
- free_local_pdev(pdev);
- return rval;
- }
- else {
- /* DCMD commands */
- /*
- * Is there a data transfer
- */
- if( uioc.xferlen ) {
- data = pci_alloc_consistent(pdev,
- uioc.xferlen, &data_dma_hndl);
- if( data == NULL ) {
- free_local_pdev(pdev);
- return (-ENOMEM);
- }
- uxferaddr = MBOX(uioc)->xferaddr;
- }
- /*
- * Is data coming down-stream
- */
- if( uioc.xferlen && (uioc.flags & UIOC_WR) ) {
- /*
- * Get the user data
- */
- if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr,
- uioc.xferlen) ) {
- pci_free_consistent(pdev,
- uioc.xferlen,
- data, data_dma_hndl);
- free_local_pdev(pdev);
- return (-EFAULT);
- }
- }
- memcpy(&mc, MBOX(uioc), sizeof(megacmd_t));
- mc.xferaddr = (u32)data_dma_hndl;
- /*
- * Issue the command
- */
- mega_internal_command(adapter, &mc, NULL);
- rval = mega_n_to_m((void __user *)arg, &mc);
- if( rval ) {
- if( uioc.xferlen ) {
- pci_free_consistent(pdev,
- uioc.xferlen, data,
- data_dma_hndl);
- }
- free_local_pdev(pdev);
- return rval;
- }
- /*
- * Is data going up-stream
- */
- if( uioc.xferlen && (uioc.flags & UIOC_RD) ) {
- if( copy_to_user((char __user *)(unsigned long) uxferaddr, data,
- uioc.xferlen) ) {
- rval = (-EFAULT);
- }
- }
- if( uioc.xferlen ) {
- pci_free_consistent(pdev,
- uioc.xferlen, data,
- data_dma_hndl);
- }
- free_local_pdev(pdev);
- return rval;
- }
- default:
- return (-EINVAL);
- }
- return 0;
- }
- static long
- megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
- {
- int ret;
- mutex_lock(&megadev_mutex);
- ret = megadev_ioctl(filep, cmd, arg);
- mutex_unlock(&megadev_mutex);
- return ret;
- }
- /**
- * mega_m_to_n()
- * @arg - user address
- * @uioc - new ioctl structure
- *
- * A thin layer to convert older mimd interface ioctl structure to NIT ioctl
- * structure
- *
- * Converts the older mimd ioctl structure to newer NIT structure
- */
- static int
- mega_m_to_n(void __user *arg, nitioctl_t *uioc)
- {
- struct uioctl_t uioc_mimd;
- char signature[8] = {0};
- u8 opcode;
- u8 subopcode;
- /*
- * check is the application conforms to NIT. We do not have to do much
- * in that case.
- * We exploit the fact that the signature is stored in the very
- * beginning of the structure.
- */
- if( copy_from_user(signature, arg, 7) )
- return (-EFAULT);
- if( memcmp(signature, "MEGANIT", 7) == 0 ) {
- /*
- * NOTE NOTE: The nit ioctl is still under flux because of
- * change of mailbox definition, in HPE. No applications yet
- * use this interface and let's not have applications use this
- * interface till the new specifitions are in place.
- */
- return -EINVAL;
- #if 0
- if( copy_from_user(uioc, arg, sizeof(nitioctl_t)) )
- return (-EFAULT);
- return 0;
- #endif
- }
- /*
- * Else assume we have mimd uioctl_t as arg. Convert to nitioctl_t
- *
- * Get the user ioctl structure
- */
- if( copy_from_user(&uioc_mimd, arg, sizeof(struct uioctl_t)) )
- return (-EFAULT);
- /*
- * Get the opcode and subopcode for the commands
- */
- opcode = uioc_mimd.ui.fcs.opcode;
- subopcode = uioc_mimd.ui.fcs.subopcode;
- switch (opcode) {
- case 0x82:
- switch (subopcode) {
- case MEGAIOC_QDRVRVER: /* Query driver version */
- uioc->opcode = GET_DRIVER_VER;
- uioc->uioc_uaddr = uioc_mimd.data;
- break;
- case MEGAIOC_QNADAP: /* Get # of adapters */
- uioc->opcode = GET_N_ADAP;
- uioc->uioc_uaddr = uioc_mimd.data;
- break;
- case MEGAIOC_QADAPINFO: /* Get adapter information */
- uioc->opcode = GET_ADAP_INFO;
- uioc->adapno = uioc_mimd.ui.fcs.adapno;
- uioc->uioc_uaddr = uioc_mimd.data;
- break;
- default:
- return(-EINVAL);
- }
- break;
- case 0x81:
- uioc->opcode = MBOX_CMD;
- uioc->adapno = uioc_mimd.ui.fcs.adapno;
- memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18);
- uioc->xferlen = uioc_mimd.ui.fcs.length;
- if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
- if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
- break;
- case 0x80:
- uioc->opcode = MBOX_CMD;
- uioc->adapno = uioc_mimd.ui.fcs.adapno;
- memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18);
- /*
- * Choose the xferlen bigger of input and output data
- */
- uioc->xferlen = uioc_mimd.outlen > uioc_mimd.inlen ?
- uioc_mimd.outlen : uioc_mimd.inlen;
- if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
- if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
- break;
- default:
- return (-EINVAL);
- }
- return 0;
- }
- /*
- * mega_n_to_m()
- * @arg - user address
- * @mc - mailbox command
- *
- * Updates the status information to the application, depending on application
- * conforms to older mimd ioctl interface or newer NIT ioctl interface
- */
- static int
- mega_n_to_m(void __user *arg, megacmd_t *mc)
- {
- nitioctl_t __user *uiocp;
- megacmd_t __user *umc;
- mega_passthru __user *upthru;
- struct uioctl_t __user *uioc_mimd;
- char signature[8] = {0};
- /*
- * check is the application conforms to NIT.
- */
- if( copy_from_user(signature, arg, 7) )
- return -EFAULT;
- if( memcmp(signature, "MEGANIT", 7) == 0 ) {
- uiocp = arg;
- if( put_user(mc->status, (u8 __user *)&MBOX_P(uiocp)->status) )
- return (-EFAULT);
- if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) {
- umc = MBOX_P(uiocp);
- if (get_user(upthru, (mega_passthru __user * __user *)&umc->xferaddr))
- return -EFAULT;
- if( put_user(mc->status, (u8 __user *)&upthru->scsistatus))
- return (-EFAULT);
- }
- }
- else {
- uioc_mimd = arg;
- if( put_user(mc->status, (u8 __user *)&uioc_mimd->mbox[17]) )
- return (-EFAULT);
- if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) {
- umc = (megacmd_t __user *)uioc_mimd->mbox;
- if (get_user(upthru, (mega_passthru __user * __user *)&umc->xferaddr))
- return (-EFAULT);
- if( put_user(mc->status, (u8 __user *)&upthru->scsistatus) )
- return (-EFAULT);
- }
- }
- return 0;
- }
- /*
- * MEGARAID 'FW' commands.
- */
- /**
- * mega_is_bios_enabled()
- * @adapter - pointer to our soft state
- *
- * issue command to find out if the BIOS is enabled for this controller
- */
- static int
- mega_is_bios_enabled(adapter_t *adapter)
- {
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- int ret;
- mbox = (mbox_t *)raw_mbox;
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
- raw_mbox[0] = IS_BIOS_ENABLED;
- raw_mbox[2] = GET_BIOS;
- ret = issue_scb_block(adapter, raw_mbox);
- return *(char *)adapter->mega_buffer;
- }
- /**
- * mega_enum_raid_scsi()
- * @adapter - pointer to our soft state
- *
- * Find out what channels are RAID/SCSI. This information is used to
- * differentiate the virtual channels and physical channels and to support
- * ROMB feature and non-disk devices.
- */
- static void
- mega_enum_raid_scsi(adapter_t *adapter)
- {
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- int i;
- mbox = (mbox_t *)raw_mbox;
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
- /*
- * issue command to find out what channels are raid/scsi
- */
- raw_mbox[0] = CHNL_CLASS;
- raw_mbox[2] = GET_CHNL_CLASS;
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
- /*
- * Non-ROMB firmware fail this command, so all channels
- * must be shown RAID
- */
- adapter->mega_ch_class = 0xFF;
- if(!issue_scb_block(adapter, raw_mbox)) {
- adapter->mega_ch_class = *((char *)adapter->mega_buffer);
- }
- for( i = 0; i < adapter->product_info.nchannels; i++ ) {
- if( (adapter->mega_ch_class >> i) & 0x01 ) {
- dev_info(&adapter->dev->dev, "channel[%d] is raid\n",
- i);
- }
- else {
- dev_info(&adapter->dev->dev, "channel[%d] is scsi\n",
- i);
- }
- }
- return;
- }
- /**
- * mega_get_boot_drv()
- * @adapter - pointer to our soft state
- *
- * Find out which device is the boot device. Note, any logical drive or any
- * phyical device (e.g., a CDROM) can be designated as a boot device.
- */
- static void
- mega_get_boot_drv(adapter_t *adapter)
- {
- struct private_bios_data *prv_bios_data;
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- u16 cksum = 0;
- u8 *cksum_p;
- u8 boot_pdrv;
- int i;
- mbox = (mbox_t *)raw_mbox;
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
- raw_mbox[0] = BIOS_PVT_DATA;
- raw_mbox[2] = GET_BIOS_PVT_DATA;
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
- adapter->boot_ldrv_enabled = 0;
- adapter->boot_ldrv = 0;
- adapter->boot_pdrv_enabled = 0;
- adapter->boot_pdrv_ch = 0;
- adapter->boot_pdrv_tgt = 0;
- if(issue_scb_block(adapter, raw_mbox) == 0) {
- prv_bios_data =
- (struct private_bios_data *)adapter->mega_buffer;
- cksum = 0;
- cksum_p = (char *)prv_bios_data;
- for (i = 0; i < 14; i++ ) {
- cksum += (u16)(*cksum_p++);
- }
- if (prv_bios_data->cksum == (u16)(0-cksum) ) {
- /*
- * If MSB is set, a physical drive is set as boot
- * device
- */
- if( prv_bios_data->boot_drv & 0x80 ) {
- adapter->boot_pdrv_enabled = 1;
- boot_pdrv = prv_bios_data->boot_drv & 0x7F;
- adapter->boot_pdrv_ch = boot_pdrv / 16;
- adapter->boot_pdrv_tgt = boot_pdrv % 16;
- }
- else {
- adapter->boot_ldrv_enabled = 1;
- adapter->boot_ldrv = prv_bios_data->boot_drv;
- }
- }
- }
- }
- /**
- * mega_support_random_del()
- * @adapter - pointer to our soft state
- *
- * Find out if this controller supports random deletion and addition of
- * logical drives
- */
- static int
- mega_support_random_del(adapter_t *adapter)
- {
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- int rval;
- mbox = (mbox_t *)raw_mbox;
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
- /*
- * issue command
- */
- raw_mbox[0] = FC_DEL_LOGDRV;
- raw_mbox[2] = OP_SUP_DEL_LOGDRV;
- rval = issue_scb_block(adapter, raw_mbox);
- return !rval;
- }
- /**
- * mega_support_ext_cdb()
- * @adapter - pointer to our soft state
- *
- * Find out if this firmware support cdblen > 10
- */
- static int
- mega_support_ext_cdb(adapter_t *adapter)
- {
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- int rval;
- mbox = (mbox_t *)raw_mbox;
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
- /*
- * issue command to find out if controller supports extended CDBs.
- */
- raw_mbox[0] = 0xA4;
- raw_mbox[2] = 0x16;
- rval = issue_scb_block(adapter, raw_mbox);
- return !rval;
- }
- /**
- * mega_del_logdrv()
- * @adapter - pointer to our soft state
- * @logdrv - logical drive to be deleted
- *
- * Delete the specified logical drive. It is the responsibility of the user
- * app to let the OS know about this operation.
- */
- static int
- mega_del_logdrv(adapter_t *adapter, int logdrv)
- {
- unsigned long flags;
- scb_t *scb;
- int rval;
- /*
- * Stop sending commands to the controller, queue them internally.
- * When deletion is complete, ISR will flush the queue.
- */
- atomic_set(&adapter->quiescent, 1);
- /*
- * Wait till all the issued commands are complete and there are no
- * commands in the pending queue
- */
- while (atomic_read(&adapter->pend_cmds) > 0 ||
- !list_empty(&adapter->pending_list))
- msleep(1000); /* sleep for 1s */
- rval = mega_do_del_logdrv(adapter, logdrv);
- spin_lock_irqsave(&adapter->lock, flags);
- /*
- * If delete operation was successful, add 0x80 to the logical drive
- * ids for commands in the pending queue.
- */
- if (adapter->read_ldidmap) {
- struct list_head *pos;
- list_for_each(pos, &adapter->pending_list) {
- scb = list_entry(pos, scb_t, list);
- if (scb->pthru->logdrv < 0x80 )
- scb->pthru->logdrv += 0x80;
- }
- }
- atomic_set(&adapter->quiescent, 0);
- mega_runpendq(adapter);
- spin_unlock_irqrestore(&adapter->lock, flags);
- return rval;
- }
- static int
- mega_do_del_logdrv(adapter_t *adapter, int logdrv)
- {
- megacmd_t mc;
- int rval;
- memset( &mc, 0, sizeof(megacmd_t));
- mc.cmd = FC_DEL_LOGDRV;
- mc.opcode = OP_DEL_LOGDRV;
- mc.subopcode = logdrv;
- rval = mega_internal_command(adapter, &mc, NULL);
- /* log this event */
- if(rval) {
- dev_warn(&adapter->dev->dev, "Delete LD-%d failed", logdrv);
- return rval;
- }
- /*
- * After deleting first logical drive, the logical drives must be
- * addressed by adding 0x80 to the logical drive id.
- */
- adapter->read_ldidmap = 1;
- return rval;
- }
- /**
- * mega_get_max_sgl()
- * @adapter - pointer to our soft state
- *
- * Find out the maximum number of scatter-gather elements supported by this
- * version of the firmware
- */
- static void
- mega_get_max_sgl(adapter_t *adapter)
- {
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- mbox = (mbox_t *)raw_mbox;
- memset(mbox, 0, sizeof(raw_mbox));
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
- raw_mbox[0] = MAIN_MISC_OPCODE;
- raw_mbox[2] = GET_MAX_SG_SUPPORT;
- if( issue_scb_block(adapter, raw_mbox) ) {
- /*
- * f/w does not support this command. Choose the default value
- */
- adapter->sglen = MIN_SGLIST;
- }
- else {
- adapter->sglen = *((char *)adapter->mega_buffer);
-
- /*
- * Make sure this is not more than the resources we are
- * planning to allocate
- */
- if ( adapter->sglen > MAX_SGLIST )
- adapter->sglen = MAX_SGLIST;
- }
- return;
- }
- /**
- * mega_support_cluster()
- * @adapter - pointer to our soft state
- *
- * Find out if this firmware support cluster calls.
- */
- static int
- mega_support_cluster(adapter_t *adapter)
- {
- unsigned char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox;
- mbox = (mbox_t *)raw_mbox;
- memset(mbox, 0, sizeof(raw_mbox));
- memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
- mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
- /*
- * Try to get the initiator id. This command will succeed iff the
- * clustering is available on this HBA.
- */
- raw_mbox[0] = MEGA_GET_TARGET_ID;
- if( issue_scb_block(adapter, raw_mbox) == 0 ) {
- /*
- * Cluster support available. Get the initiator target id.
- * Tell our id to mid-layer too.
- */
- adapter->this_id = *(u32 *)adapter->mega_buffer;
- adapter->host->this_id = adapter->this_id;
- return 1;
- }
- return 0;
- }
- #ifdef CONFIG_PROC_FS
- /**
- * mega_adapinq()
- * @adapter - pointer to our soft state
- * @dma_handle - DMA address of the buffer
- *
- * Issue internal commands while interrupts are available.
- * We only issue direct mailbox commands from within the driver. ioctl()
- * interface using these routines can issue passthru commands.
- */
- static int
- mega_adapinq(adapter_t *adapter, dma_addr_t dma_handle)
- {
- megacmd_t mc;
- memset(&mc, 0, sizeof(megacmd_t));
- if( adapter->flag & BOARD_40LD ) {
- mc.cmd = FC_NEW_CONFIG;
- mc.opcode = NC_SUBOP_ENQUIRY3;
- mc.subopcode = ENQ3_GET_SOLICITED_FULL;
- }
- else {
- mc.cmd = MEGA_MBOXCMD_ADPEXTINQ;
- }
- mc.xferaddr = (u32)dma_handle;
- if ( mega_internal_command(adapter, &mc, NULL) != 0 ) {
- return -1;
- }
- return 0;
- }
- /** mega_internal_dev_inquiry()
- * @adapter - pointer to our soft state
- * @ch - channel for this device
- * @tgt - ID of this device
- * @buf_dma_handle - DMA address of the buffer
- *
- * Issue the scsi inquiry for the specified device.
- */
- static int
- mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
- dma_addr_t buf_dma_handle)
- {
- mega_passthru *pthru;
- dma_addr_t pthru_dma_handle;
- megacmd_t mc;
- int rval;
- struct pci_dev *pdev;
- /*
- * For all internal commands, the buffer must be allocated in <4GB
- * address range
- */
- if( make_local_pdev(adapter, &pdev) != 0 ) return -1;
- pthru = pci_alloc_consistent(pdev, sizeof(mega_passthru),
- &pthru_dma_handle);
- if( pthru == NULL ) {
- free_local_pdev(pdev);
- return -1;
- }
- pthru->timeout = 2;
- pthru->ars = 1;
- pthru->reqsenselen = 14;
- pthru->islogical = 0;
- pthru->channel = (adapter->flag & BOARD_40LD) ? 0 : ch;
- pthru->target = (adapter->flag & BOARD_40LD) ? (ch << 4)|tgt : tgt;
- pthru->cdblen = 6;
- pthru->cdb[0] = INQUIRY;
- pthru->cdb[1] = 0;
- pthru->cdb[2] = 0;
- pthru->cdb[3] = 0;
- pthru->cdb[4] = 255;
- pthru->cdb[5] = 0;
- pthru->dataxferaddr = (u32)buf_dma_handle;
- pthru->dataxferlen = 256;
- memset(&mc, 0, sizeof(megacmd_t));
- mc.cmd = MEGA_MBOXCMD_PASSTHRU;
- mc.xferaddr = (u32)pthru_dma_handle;
- rval = mega_internal_command(adapter, &mc, pthru);
- pci_free_consistent(pdev, sizeof(mega_passthru), pthru,
- pthru_dma_handle);
- free_local_pdev(pdev);
- return rval;
- }
- #endif
- /**
- * mega_internal_command()
- * @adapter - pointer to our soft state
- * @mc - the mailbox command
- * @pthru - Passthru structure for DCDB commands
- *
- * Issue the internal commands in interrupt mode.
- * The last argument is the address of the passthru structure if the command
- * to be fired is a passthru command
- *
- * Note: parameter 'pthru' is null for non-passthru commands.
- */
- static int
- mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
- {
- unsigned long flags;
- scb_t *scb;
- int rval;
- /*
- * The internal commands share one command id and hence are
- * serialized. This is so because we want to reserve maximum number of
- * available command ids for the I/O commands.
- */
- mutex_lock(&adapter->int_mtx);
- scb = &adapter->int_scb;
- memset(scb, 0, sizeof(scb_t));
- scb->idx = CMDID_INT_CMDS;
- scb->state |= SCB_ACTIVE | SCB_PENDQ;
- memcpy(scb->raw_mbox, mc, sizeof(megacmd_t));
- /*
- * Is it a passthru command
- */
- if (mc->cmd == MEGA_MBOXCMD_PASSTHRU)
- scb->pthru = pthru;
- spin_lock_irqsave(&adapter->lock, flags);
- list_add_tail(&scb->list, &adapter->pending_list);
- /*
- * Check if the HBA is in quiescent state, e.g., during a
- * delete logical drive opertion. If it is, don't run
- * the pending_list.
- */
- if (atomic_read(&adapter->quiescent) == 0)
- mega_runpendq(adapter);
- spin_unlock_irqrestore(&adapter->lock, flags);
- wait_for_completion(&adapter->int_waitq);
- mc->status = rval = adapter->int_status;
- /*
- * Print a debug message for all failed commands. Applications can use
- * this information.
- */
- if (rval && trace_level) {
- dev_info(&adapter->dev->dev, "cmd [%x, %x, %x] status:[%x]\n",
- mc->cmd, mc->opcode, mc->subopcode, rval);
- }
- mutex_unlock(&adapter->int_mtx);
- return rval;
- }
- static struct scsi_host_template megaraid_template = {
- .module = THIS_MODULE,
- .name = "MegaRAID",
- .proc_name = "megaraid_legacy",
- .info = megaraid_info,
- .queuecommand = megaraid_queue,
- .bios_param = megaraid_biosparam,
- .max_sectors = MAX_SECTORS_PER_IO,
- .can_queue = MAX_COMMANDS,
- .this_id = DEFAULT_INITIATOR_ID,
- .sg_tablesize = MAX_SGLIST,
- .cmd_per_lun = DEF_CMD_PER_LUN,
- .use_clustering = ENABLE_CLUSTERING,
- .eh_abort_handler = megaraid_abort,
- .eh_device_reset_handler = megaraid_reset,
- .eh_bus_reset_handler = megaraid_reset,
- .eh_host_reset_handler = megaraid_reset,
- .no_write_same = 1,
- };
- static int
- megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
- {
- struct Scsi_Host *host;
- adapter_t *adapter;
- unsigned long mega_baseport, tbase, flag = 0;
- u16 subsysid, subsysvid;
- u8 pci_bus, pci_dev_func;
- int irq, i, j;
- int error = -ENODEV;
- if (hba_count >= MAX_CONTROLLERS)
- goto out;
- if (pci_enable_device(pdev))
- goto out;
- pci_set_master(pdev);
- pci_bus = pdev->bus->number;
- pci_dev_func = pdev->devfn;
- /*
- * The megaraid3 stuff reports the ID of the Intel part which is not
- * remotely specific to the megaraid
- */
- if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
- u16 magic;
- /*
- * Don't fall over the Compaq management cards using the same
- * PCI identifier
- */
- if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ &&
- pdev->subsystem_device == 0xC000)
- goto out_disable_device;
- /* Now check the magic signature byte */
- pci_read_config_word(pdev, PCI_CONF_AMISIG, &magic);
- if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE)
- goto out_disable_device;
- /* Ok it is probably a megaraid */
- }
- /*
- * For these vendor and device ids, signature offsets are not
- * valid and 64 bit is implicit
- */
- if (id->driver_data & BOARD_64BIT)
- flag |= BOARD_64BIT;
- else {
- u32 magic64;
- pci_read_config_dword(pdev, PCI_CONF_AMISIG64, &magic64);
- if (magic64 == HBA_SIGNATURE_64BIT)
- flag |= BOARD_64BIT;
- }
- subsysvid = pdev->subsystem_vendor;
- subsysid = pdev->subsystem_device;
- dev_notice(&pdev->dev, "found 0x%4.04x:0x%4.04x\n",
- id->vendor, id->device);
- /* Read the base port and IRQ from PCI */
- mega_baseport = pci_resource_start(pdev, 0);
- irq = pdev->irq;
- tbase = mega_baseport;
- if (pci_resource_flags(pdev, 0) & IORESOURCE_MEM) {
- flag |= BOARD_MEMMAP;
- if (!request_mem_region(mega_baseport, 128, "megaraid")) {
- dev_warn(&pdev->dev, "mem region busy!\n");
- goto out_disable_device;
- }
- mega_baseport = (unsigned long)ioremap(mega_baseport, 128);
- if (!mega_baseport) {
- dev_warn(&pdev->dev, "could not map hba memory\n");
- goto out_release_region;
- }
- } else {
- flag |= BOARD_IOMAP;
- mega_baseport += 0x10;
- if (!request_region(mega_baseport, 16, "megaraid"))
- goto out_disable_device;
- }
- /* Initialize SCSI Host structure */
- host = scsi_host_alloc(&megaraid_template, sizeof(adapter_t));
- if (!host)
- goto out_iounmap;
- adapter = (adapter_t *)host->hostdata;
- memset(adapter, 0, sizeof(adapter_t));
- dev_notice(&pdev->dev,
- "scsi%d:Found MegaRAID controller at 0x%lx, IRQ:%d\n",
- host->host_no, mega_baseport, irq);
- adapter->base = mega_baseport;
- if (flag & BOARD_MEMMAP)
- adapter->mmio_base = (void __iomem *) mega_baseport;
- INIT_LIST_HEAD(&adapter->free_list);
- INIT_LIST_HEAD(&adapter->pending_list);
- INIT_LIST_HEAD(&adapter->completed_list);
- adapter->flag = flag;
- spin_lock_init(&adapter->lock);
- host->cmd_per_lun = max_cmd_per_lun;
- host->max_sectors = max_sectors_per_io;
- adapter->dev = pdev;
- adapter->host = host;
- adapter->host->irq = irq;
- if (flag & BOARD_MEMMAP)
- adapter->host->base = tbase;
- else {
- adapter->host->io_port = tbase;
- adapter->host->n_io_port = 16;
- }
- adapter->host->unique_id = (pci_bus << 8) | pci_dev_func;
- /*
- * Allocate buffer to issue internal commands.
- */
- adapter->mega_buffer = pci_alloc_consistent(adapter->dev,
- MEGA_BUFFER_SIZE, &adapter->buf_dma_handle);
- if (!adapter->mega_buffer) {
- dev_warn(&pdev->dev, "out of RAM\n");
- goto out_host_put;
- }
- adapter->scb_list = kmalloc_array(MAX_COMMANDS, sizeof(scb_t),
- GFP_KERNEL);
- if (!adapter->scb_list) {
- dev_warn(&pdev->dev, "out of RAM\n");
- goto out_free_cmd_buffer;
- }
- if (request_irq(irq, (adapter->flag & BOARD_MEMMAP) ?
- megaraid_isr_memmapped : megaraid_isr_iomapped,
- IRQF_SHARED, "megaraid", adapter)) {
- dev_warn(&pdev->dev, "Couldn't register IRQ %d!\n", irq);
- goto out_free_scb_list;
- }
- if (mega_setup_mailbox(adapter))
- goto out_free_irq;
- if (mega_query_adapter(adapter))
- goto out_free_mbox;
- /*
- * Have checks for some buggy f/w
- */
- if ((subsysid == 0x1111) && (subsysvid == 0x1111)) {
- /*
- * Which firmware
- */
- if (!strcmp(adapter->fw_version, "3.00") ||
- !strcmp(adapter->fw_version, "3.01")) {
- dev_warn(&pdev->dev,
- "Your card is a Dell PERC "
- "2/SC RAID controller with "
- "firmware\nmegaraid: 3.00 or 3.01. "
- "This driver is known to have "
- "corruption issues\nmegaraid: with "
- "those firmware versions on this "
- "specific card. In order\nmegaraid: "
- "to protect your data, please upgrade "
- "your firmware to version\nmegaraid: "
- "3.10 or later, available from the "
- "Dell Technical Support web\n"
- "megaraid: site at\nhttp://support."
- "dell.com/us/en/filelib/download/"
- "index.asp?fileid=2940\n"
- );
- }
- }
- /*
- * If we have a HP 1M(0x60E7)/2M(0x60E8) controller with
- * firmware H.01.07, H.01.08, and H.01.09 disable 64 bit
- * support, since this firmware cannot handle 64 bit
- * addressing
- */
- if ((subsysvid == PCI_VENDOR_ID_HP) &&
- ((subsysid == 0x60E7) || (subsysid == 0x60E8))) {
- /*
- * which firmware
- */
- if (!strcmp(adapter->fw_version, "H01.07") ||
- !strcmp(adapter->fw_version, "H01.08") ||
- !strcmp(adapter->fw_version, "H01.09") ) {
- dev_warn(&pdev->dev,
- "Firmware H.01.07, "
- "H.01.08, and H.01.09 on 1M/2M "
- "controllers\n"
- "do not support 64 bit "
- "addressing.\nDISABLING "
- "64 bit support.\n");
- adapter->flag &= ~BOARD_64BIT;
- }
- }
- if (mega_is_bios_enabled(adapter))
- mega_hbas[hba_count].is_bios_enabled = 1;
- mega_hbas[hba_count].hostdata_addr = adapter;
- /*
- * Find out which channel is raid and which is scsi. This is
- * for ROMB support.
- */
- mega_enum_raid_scsi(adapter);
- /*
- * Find out if a logical drive is set as the boot drive. If
- * there is one, will make that as the first logical drive.
- * ROMB: Do we have to boot from a physical drive. Then all
- * the physical drives would appear before the logical disks.
- * Else, all the physical drives would be exported to the mid
- * layer after logical drives.
- */
- mega_get_boot_drv(adapter);
- if (adapter->boot_pdrv_enabled) {
- j = adapter->product_info.nchannels;
- for( i = 0; i < j; i++ )
- adapter->logdrv_chan[i] = 0;
- for( i = j; i < NVIRT_CHAN + j; i++ )
- adapter->logdrv_chan[i] = 1;
- } else {
- for (i = 0; i < NVIRT_CHAN; i++)
- adapter->logdrv_chan[i] = 1;
- for (i = NVIRT_CHAN; i < MAX_CHANNELS+NVIRT_CHAN; i++)
- adapter->logdrv_chan[i] = 0;
- adapter->mega_ch_class <<= NVIRT_CHAN;
- }
- /*
- * Do we support random deletion and addition of logical
- * drives
- */
- adapter->read_ldidmap = 0; /* set it after first logdrv
- delete cmd */
- adapter->support_random_del = mega_support_random_del(adapter);
- /* Initialize SCBs */
- if (mega_init_scb(adapter))
- goto out_free_mbox;
- /*
- * Reset the pending commands counter
- */
- atomic_set(&adapter->pend_cmds, 0);
- /*
- * Reset the adapter quiescent flag
- */
- atomic_set(&adapter->quiescent, 0);
- hba_soft_state[hba_count] = adapter;
- /*
- * Fill in the structure which needs to be passed back to the
- * application when it does an ioctl() for controller related
- * information.
- */
- i = hba_count;
- mcontroller[i].base = mega_baseport;
- mcontroller[i].irq = irq;
- mcontroller[i].numldrv = adapter->numldrv;
- mcontroller[i].pcibus = pci_bus;
- mcontroller[i].pcidev = id->device;
- mcontroller[i].pcifun = PCI_FUNC (pci_dev_func);
- mcontroller[i].pciid = -1;
- mcontroller[i].pcivendor = id->vendor;
- mcontroller[i].pcislot = PCI_SLOT(pci_dev_func);
- mcontroller[i].uid = (pci_bus << 8) | pci_dev_func;
- /* Set the Mode of addressing to 64 bit if we can */
- if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) {
- pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
- adapter->has_64bit_addr = 1;
- } else {
- pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- adapter->has_64bit_addr = 0;
- }
-
- mutex_init(&adapter->int_mtx);
- init_completion(&adapter->int_waitq);
- adapter->this_id = DEFAULT_INITIATOR_ID;
- adapter->host->this_id = DEFAULT_INITIATOR_ID;
- #if MEGA_HAVE_CLUSTERING
- /*
- * Is cluster support enabled on this controller
- * Note: In a cluster the HBAs ( the initiators ) will have
- * different target IDs and we cannot assume it to be 7. Call
- * to mega_support_cluster() will get the target ids also if
- * the cluster support is available
- */
- adapter->has_cluster = mega_support_cluster(adapter);
- if (adapter->has_cluster) {
- dev_notice(&pdev->dev,
- "Cluster driver, initiator id:%d\n",
- adapter->this_id);
- }
- #endif
- pci_set_drvdata(pdev, host);
- mega_create_proc_entry(hba_count, mega_proc_dir_entry);
- error = scsi_add_host(host, &pdev->dev);
- if (error)
- goto out_free_mbox;
- scsi_scan_host(host);
- hba_count++;
- return 0;
- out_free_mbox:
- pci_free_consistent(adapter->dev, sizeof(mbox64_t),
- adapter->una_mbox64, adapter->una_mbox64_dma);
- out_free_irq:
- free_irq(adapter->host->irq, adapter);
- out_free_scb_list:
- kfree(adapter->scb_list);
- out_free_cmd_buffer:
- pci_free_consistent(adapter->dev, MEGA_BUFFER_SIZE,
- adapter->mega_buffer, adapter->buf_dma_handle);
- out_host_put:
- scsi_host_put(host);
- out_iounmap:
- if (flag & BOARD_MEMMAP)
- iounmap((void *)mega_baseport);
- out_release_region:
- if (flag & BOARD_MEMMAP)
- release_mem_region(tbase, 128);
- else
- release_region(mega_baseport, 16);
- out_disable_device:
- pci_disable_device(pdev);
- out:
- return error;
- }
- static void
- __megaraid_shutdown(adapter_t *adapter)
- {
- u_char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox = (mbox_t *)raw_mbox;
- int i;
- /* Flush adapter cache */
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
- raw_mbox[0] = FLUSH_ADAPTER;
- free_irq(adapter->host->irq, adapter);
- /* Issue a blocking (interrupts disabled) command to the card */
- issue_scb_block(adapter, raw_mbox);
- /* Flush disks cache */
- memset(&mbox->m_out, 0, sizeof(raw_mbox));
- raw_mbox[0] = FLUSH_SYSTEM;
- /* Issue a blocking (interrupts disabled) command to the card */
- issue_scb_block(adapter, raw_mbox);
-
- if (atomic_read(&adapter->pend_cmds) > 0)
- dev_warn(&adapter->dev->dev, "pending commands!!\n");
- /*
- * Have a delibrate delay to make sure all the caches are
- * actually flushed.
- */
- for (i = 0; i <= 10; i++)
- mdelay(1000);
- }
- static void
- megaraid_remove_one(struct pci_dev *pdev)
- {
- struct Scsi_Host *host = pci_get_drvdata(pdev);
- adapter_t *adapter = (adapter_t *)host->hostdata;
- char buf[12] = { 0 };
- scsi_remove_host(host);
- __megaraid_shutdown(adapter);
- /* Free our resources */
- if (adapter->flag & BOARD_MEMMAP) {
- iounmap((void *)adapter->base);
- release_mem_region(adapter->host->base, 128);
- } else
- release_region(adapter->base, 16);
- mega_free_sgl(adapter);
- sprintf(buf, "hba%d", adapter->host->host_no);
- remove_proc_subtree(buf, mega_proc_dir_entry);
- pci_free_consistent(adapter->dev, MEGA_BUFFER_SIZE,
- adapter->mega_buffer, adapter->buf_dma_handle);
- kfree(adapter->scb_list);
- pci_free_consistent(adapter->dev, sizeof(mbox64_t),
- adapter->una_mbox64, adapter->una_mbox64_dma);
- scsi_host_put(host);
- pci_disable_device(pdev);
- hba_count--;
- }
- static void
- megaraid_shutdown(struct pci_dev *pdev)
- {
- struct Scsi_Host *host = pci_get_drvdata(pdev);
- adapter_t *adapter = (adapter_t *)host->hostdata;
- __megaraid_shutdown(adapter);
- }
- static struct pci_device_id megaraid_pci_tbl[] = {
- {PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_AMI_MEGARAID3,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {0,}
- };
- MODULE_DEVICE_TABLE(pci, megaraid_pci_tbl);
- static struct pci_driver megaraid_pci_driver = {
- .name = "megaraid_legacy",
- .id_table = megaraid_pci_tbl,
- .probe = megaraid_probe_one,
- .remove = megaraid_remove_one,
- .shutdown = megaraid_shutdown,
- };
- static int __init megaraid_init(void)
- {
- int error;
- if ((max_cmd_per_lun <= 0) || (max_cmd_per_lun > MAX_CMD_PER_LUN))
- max_cmd_per_lun = MAX_CMD_PER_LUN;
- if (max_mbox_busy_wait > MBOX_BUSY_WAIT)
- max_mbox_busy_wait = MBOX_BUSY_WAIT;
- #ifdef CONFIG_PROC_FS
- mega_proc_dir_entry = proc_mkdir("megaraid", NULL);
- if (!mega_proc_dir_entry) {
- printk(KERN_WARNING
- "megaraid: failed to create megaraid root\n");
- }
- #endif
- error = pci_register_driver(&megaraid_pci_driver);
- if (error) {
- #ifdef CONFIG_PROC_FS
- remove_proc_entry("megaraid", NULL);
- #endif
- return error;
- }
- /*
- * Register the driver as a character device, for applications
- * to access it for ioctls.
- * First argument (major) to register_chrdev implies a dynamic
- * major number allocation.
- */
- major = register_chrdev(0, "megadev_legacy", &megadev_fops);
- if (!major) {
- printk(KERN_WARNING
- "megaraid: failed to register char device\n");
- }
- return 0;
- }
- static void __exit megaraid_exit(void)
- {
- /*
- * Unregister the character device interface to the driver.
- */
- unregister_chrdev(major, "megadev_legacy");
- pci_unregister_driver(&megaraid_pci_driver);
- #ifdef CONFIG_PROC_FS
- remove_proc_entry("megaraid", NULL);
- #endif
- }
- module_init(megaraid_init);
- module_exit(megaraid_exit);
- /* vi: set ts=8 sw=8 tw=78: */
|