usb.h 4.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166
  1. /******************************************************************************
  2. *
  3. * Copyright(c) 2009-2012 Realtek Corporation. All rights reserved.
  4. *
  5. * This program is free software; you can redistribute it and/or modify it
  6. * under the terms of version 2 of the GNU General Public License as
  7. * published by the Free Software Foundation.
  8. *
  9. * This program is distributed in the hope that it will be useful, but WITHOUT
  10. * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11. * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
  12. * more details.
  13. *
  14. * The full GNU General Public License is included in this distribution in the
  15. * file called LICENSE.
  16. *
  17. * Contact Information:
  18. * wlanfae <wlanfae@realtek.com>
  19. * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
  20. * Hsinchu 300, Taiwan.
  21. *
  22. *****************************************************************************/
  23. #ifndef __RTL_USB_H__
  24. #define __RTL_USB_H__
  25. #include <linux/skbuff.h>
  26. #define RTL_RX_DESC_SIZE 24
  27. #define RTL_USB_DEVICE(vend, prod, cfg) \
  28. .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
  29. .idVendor = (vend), \
  30. .idProduct = (prod), \
  31. .driver_info = (kernel_ulong_t)&(cfg)
  32. #define USB_HIGH_SPEED_BULK_SIZE 512
  33. #define USB_FULL_SPEED_BULK_SIZE 64
  34. #define RTL_USB_MAX_TXQ_NUM 4 /* max tx queue */
  35. #define RTL_USB_MAX_EP_NUM 6 /* max ep number */
  36. #define RTL_USB_MAX_TX_URBS_NUM 8
  37. enum rtl_txq {
  38. /* These definitions shall be consistent with value
  39. * returned by skb_get_queue_mapping
  40. *------------------------------------*/
  41. RTL_TXQ_BK,
  42. RTL_TXQ_BE,
  43. RTL_TXQ_VI,
  44. RTL_TXQ_VO,
  45. /*------------------------------------*/
  46. RTL_TXQ_BCN,
  47. RTL_TXQ_MGT,
  48. RTL_TXQ_HI,
  49. /* Must be last */
  50. __RTL_TXQ_NUM,
  51. };
  52. struct rtl_ep_map {
  53. u32 ep_mapping[__RTL_TXQ_NUM];
  54. };
  55. struct _trx_info {
  56. struct rtl_usb *rtlusb;
  57. u32 ep_num;
  58. };
  59. static inline void _rtl_install_trx_info(struct rtl_usb *rtlusb,
  60. struct sk_buff *skb,
  61. u32 ep_num)
  62. {
  63. struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
  64. info->rate_driver_data[0] = rtlusb;
  65. info->rate_driver_data[1] = (void *)(__kernel_size_t)ep_num;
  66. }
  67. /* Add suspend/resume later */
  68. enum rtl_usb_state {
  69. USB_STATE_STOP = 0,
  70. USB_STATE_START = 1,
  71. };
  72. #define IS_USB_STOP(rtlusb_ptr) (USB_STATE_STOP == (rtlusb_ptr)->state)
  73. #define IS_USB_START(rtlusb_ptr) (USB_STATE_START == (rtlusb_ptr)->state)
  74. #define SET_USB_STOP(rtlusb_ptr) \
  75. do { \
  76. (rtlusb_ptr)->state = USB_STATE_STOP; \
  77. } while (0)
  78. #define SET_USB_START(rtlusb_ptr) \
  79. do { \
  80. (rtlusb_ptr)->state = USB_STATE_START; \
  81. } while (0)
  82. struct rtl_usb {
  83. struct usb_device *udev;
  84. struct usb_interface *intf;
  85. enum rtl_usb_state state;
  86. /* Bcn control register setting */
  87. u32 reg_bcn_ctrl_val;
  88. /* for 88/92cu card disable */
  89. u8 disableHWSM;
  90. /*QOS & EDCA */
  91. enum acm_method acm_method;
  92. /* irq . HIMR,HIMR_EX */
  93. u32 irq_mask[2];
  94. bool irq_enabled;
  95. u16 (*usb_mq_to_hwq)(__le16 fc, u16 mac80211_queue_index);
  96. /* Tx */
  97. u8 out_ep_nums ;
  98. u8 out_queue_sel;
  99. struct rtl_ep_map ep_map;
  100. u32 max_bulk_out_size;
  101. u32 tx_submitted_urbs;
  102. struct sk_buff_head tx_skb_queue[RTL_USB_MAX_EP_NUM];
  103. struct usb_anchor tx_pending[RTL_USB_MAX_EP_NUM];
  104. struct usb_anchor tx_submitted;
  105. struct sk_buff *(*usb_tx_aggregate_hdl)(struct ieee80211_hw *,
  106. struct sk_buff_head *);
  107. int (*usb_tx_post_hdl)(struct ieee80211_hw *,
  108. struct urb *, struct sk_buff *);
  109. void (*usb_tx_cleanup)(struct ieee80211_hw *, struct sk_buff *);
  110. /* Rx */
  111. u8 in_ep_nums;
  112. u32 in_ep; /* Bulk IN endpoint number */
  113. u32 rx_max_size; /* Bulk IN max buffer size */
  114. u32 rx_urb_num; /* How many Bulk INs are submitted to host. */
  115. struct usb_anchor rx_submitted;
  116. struct usb_anchor rx_cleanup_urbs;
  117. struct tasklet_struct rx_work_tasklet;
  118. struct sk_buff_head rx_queue;
  119. void (*usb_rx_segregate_hdl)(struct ieee80211_hw *, struct sk_buff *,
  120. struct sk_buff_head *);
  121. void (*usb_rx_hdl)(struct ieee80211_hw *, struct sk_buff *);
  122. };
  123. struct rtl_usb_priv {
  124. struct bt_coexist_info bt_coexist;
  125. struct rtl_usb dev;
  126. };
  127. #define rtl_usbpriv(hw) (((struct rtl_usb_priv *)(rtl_priv(hw))->priv))
  128. #define rtl_usbdev(usbpriv) (&((usbpriv)->dev))
  129. int rtl_usb_probe(struct usb_interface *intf,
  130. const struct usb_device_id *id,
  131. struct rtl_hal_cfg *rtl92cu_hal_cfg);
  132. void rtl_usb_disconnect(struct usb_interface *intf);
  133. int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message);
  134. int rtl_usb_resume(struct usb_interface *pusb_intf);
  135. #endif