123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151 |
- /*
- * Copyright (c) 2012 Intel Corporation. All rights reserved.
- * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
- /*
- * This file is conditionally built on x86_64 only. Otherwise weak symbol
- * versions of the functions exported from here are used.
- */
- #include <linux/pci.h>
- #include <asm/mtrr.h>
- #include <asm/processor.h>
- #include "qib.h"
- /**
- * qib_enable_wc - enable write combining for MMIO writes to the device
- * @dd: qlogic_ib device
- *
- * This routine is x86_64-specific; it twiddles the CPU's MTRRs to enable
- * write combining.
- */
- int qib_enable_wc(struct qib_devdata *dd)
- {
- int ret = 0;
- u64 pioaddr, piolen;
- unsigned bits;
- const unsigned long addr = pci_resource_start(dd->pcidev, 0);
- const size_t len = pci_resource_len(dd->pcidev, 0);
- /*
- * Set the PIO buffers to be WCCOMB, so we get HT bursts to the
- * chip. Linux (possibly the hardware) requires it to be on a power
- * of 2 address matching the length (which has to be a power of 2).
- * For rev1, that means the base address, for rev2, it will be just
- * the PIO buffers themselves.
- * For chips with two sets of buffers, the calculations are
- * somewhat more complicated; we need to sum, and the piobufbase
- * register has both offsets, 2K in low 32 bits, 4K in high 32 bits.
- * The buffers are still packed, so a single range covers both.
- */
- if (dd->piobcnt2k && dd->piobcnt4k) {
- /* 2 sizes for chip */
- unsigned long pio2kbase, pio4kbase;
- pio2kbase = dd->piobufbase & 0xffffffffUL;
- pio4kbase = (dd->piobufbase >> 32) & 0xffffffffUL;
- if (pio2kbase < pio4kbase) {
- /* all current chips */
- pioaddr = addr + pio2kbase;
- piolen = pio4kbase - pio2kbase +
- dd->piobcnt4k * dd->align4k;
- } else {
- pioaddr = addr + pio4kbase;
- piolen = pio2kbase - pio4kbase +
- dd->piobcnt2k * dd->palign;
- }
- } else { /* single buffer size (2K, currently) */
- pioaddr = addr + dd->piobufbase;
- piolen = dd->piobcnt2k * dd->palign +
- dd->piobcnt4k * dd->align4k;
- }
- for (bits = 0; !(piolen & (1ULL << bits)); bits++)
- ; /* do nothing */
- if (piolen != (1ULL << bits)) {
- piolen >>= bits;
- while (piolen >>= 1)
- bits++;
- piolen = 1ULL << (bits + 1);
- }
- if (pioaddr & (piolen - 1)) {
- u64 atmp = pioaddr & ~(piolen - 1);
- if (atmp < addr || (atmp + piolen) > (addr + len)) {
- qib_dev_err(dd,
- "No way to align address/size (%llx/%llx), no WC mtrr\n",
- (unsigned long long) atmp,
- (unsigned long long) piolen << 1);
- ret = -ENODEV;
- } else {
- pioaddr = atmp;
- piolen <<= 1;
- }
- }
- if (!ret) {
- dd->wc_cookie = arch_phys_wc_add(pioaddr, piolen);
- if (dd->wc_cookie < 0)
- /* use error from routine */
- ret = dd->wc_cookie;
- }
- return ret;
- }
- /**
- * qib_disable_wc - disable write combining for MMIO writes to the device
- * @dd: qlogic_ib device
- */
- void qib_disable_wc(struct qib_devdata *dd)
- {
- arch_phys_wc_del(dd->wc_cookie);
- }
- /**
- * qib_unordered_wc - indicate whether write combining is ordered
- *
- * Because our performance depends on our ability to do write combining mmio
- * writes in the most efficient way, we need to know if we are on an Intel
- * or AMD x86_64 processor. AMD x86_64 processors flush WC buffers out in
- * the order completed, and so no special flushing is required to get
- * correct ordering. Intel processors, however, will flush write buffers
- * out in "random" orders, and so explicit ordering is needed at times.
- */
- int qib_unordered_wc(void)
- {
- return boot_cpu_data.x86_vendor != X86_VENDOR_AMD;
- }
|