linux-phytium/drivers/gpu/drm/i915/intel_guc_fwif.h

/*
 * Copyright © 2014 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 */
#ifndef _INTEL_GUC_FWIF_H
#define _INTEL_GUC_FWIF_H

#define GUC_CLIENT_PRIORITY_KMD_HIGH	0
#define GUC_CLIENT_PRIORITY_HIGH	1
#define GUC_CLIENT_PRIORITY_KMD_NORMAL	2
#define GUC_CLIENT_PRIORITY_NORMAL	3
#define GUC_CLIENT_PRIORITY_NUM		4

#define GUC_MAX_STAGE_DESCRIPTORS	1024
#define	GUC_INVALID_STAGE_ID		GUC_MAX_STAGE_DESCRIPTORS

#define GUC_RENDER_ENGINE		0
#define GUC_VIDEO_ENGINE		1
#define GUC_BLITTER_ENGINE		2
#define GUC_VIDEOENHANCE_ENGINE		3
#define GUC_VIDEO_ENGINE2		4
#define GUC_MAX_ENGINES_NUM		(GUC_VIDEO_ENGINE2 + 1)

/* Work queue item header definitions */
#define WQ_STATUS_ACTIVE		1
#define WQ_STATUS_SUSPENDED		2
#define WQ_STATUS_CMD_ERROR		3
#define WQ_STATUS_ENGINE_ID_NOT_USED	4
#define WQ_STATUS_SUSPENDED_FROM_RESET	5
#define WQ_TYPE_SHIFT			0
#define   WQ_TYPE_BATCH_BUF		(0x1 << WQ_TYPE_SHIFT)
#define   WQ_TYPE_PSEUDO		(0x2 << WQ_TYPE_SHIFT)
#define   WQ_TYPE_INORDER		(0x3 << WQ_TYPE_SHIFT)
#define WQ_TARGET_SHIFT			10
#define WQ_LEN_SHIFT			16
#define WQ_NO_WCFLUSH_WAIT		(1 << 27)
#define WQ_PRESENT_WORKLOAD		(1 << 28)

#define WQ_RING_TAIL_SHIFT		20
#define WQ_RING_TAIL_MAX		0x7FF	/* 2^11 QWords */
#define WQ_RING_TAIL_MASK		(WQ_RING_TAIL_MAX << WQ_RING_TAIL_SHIFT)

#define GUC_DOORBELL_ENABLED		1
#define GUC_DOORBELL_DISABLED		0

#define GUC_STAGE_DESC_ATTR_ACTIVE	BIT(0)
#define GUC_STAGE_DESC_ATTR_PENDING_DB	BIT(1)
#define GUC_STAGE_DESC_ATTR_KERNEL	BIT(2)
#define GUC_STAGE_DESC_ATTR_PREEMPT	BIT(3)
#define GUC_STAGE_DESC_ATTR_RESET	BIT(4)
#define GUC_STAGE_DESC_ATTR_WQLOCKED	BIT(5)
#define GUC_STAGE_DESC_ATTR_PCH		BIT(6)
#define GUC_STAGE_DESC_ATTR_TERMINATED	BIT(7)

/* The guc control data is 10 DWORDs */
#define GUC_CTL_CTXINFO			0
#define   GUC_CTL_CTXNUM_IN16_SHIFT	0
#define   GUC_CTL_BASE_ADDR_SHIFT	12

#define GUC_CTL_ARAT_HIGH		1
#define GUC_CTL_ARAT_LOW		2

#define GUC_CTL_DEVICE_INFO		3

#define GUC_CTL_LOG_PARAMS		4
#define   GUC_LOG_VALID			(1 << 0)
#define   GUC_LOG_NOTIFY_ON_HALF_FULL	(1 << 1)
#define   GUC_LOG_ALLOC_IN_MEGABYTE	(1 << 3)
#define   GUC_LOG_CRASH_SHIFT		4
#define   GUC_LOG_CRASH_MASK		(0x1 << GUC_LOG_CRASH_SHIFT)
#define   GUC_LOG_DPC_SHIFT		6
#define   GUC_LOG_DPC_MASK	        (0x7 << GUC_LOG_DPC_SHIFT)
#define   GUC_LOG_ISR_SHIFT		9
#define   GUC_LOG_ISR_MASK	        (0x7 << GUC_LOG_ISR_SHIFT)
#define   GUC_LOG_BUF_ADDR_SHIFT	12

#define GUC_CTL_PAGE_FAULT_CONTROL	5

#define GUC_CTL_WA			6
#define   GUC_CTL_WA_UK_BY_DRIVER	(1 << 3)

#define GUC_CTL_FEATURE			7
#define   GUC_CTL_VCS2_ENABLED		(1 << 0)
#define   GUC_CTL_KERNEL_SUBMISSIONS	(1 << 1)
#define   GUC_CTL_FEATURE2		(1 << 2)
#define   GUC_CTL_POWER_GATING		(1 << 3)
#define   GUC_CTL_DISABLE_SCHEDULER	(1 << 4)
#define   GUC_CTL_PREEMPTION_LOG	(1 << 5)
#define   GUC_CTL_ENABLE_SLPC		(1 << 7)
#define   GUC_CTL_RESET_ON_PREMPT_FAILURE	(1 << 8)

#define GUC_CTL_DEBUG			8
#define   GUC_LOG_VERBOSITY_SHIFT	0
#define   GUC_LOG_VERBOSITY_LOW		(0 << GUC_LOG_VERBOSITY_SHIFT)
#define   GUC_LOG_VERBOSITY_MED		(1 << GUC_LOG_VERBOSITY_SHIFT)
#define   GUC_LOG_VERBOSITY_HIGH	(2 << GUC_LOG_VERBOSITY_SHIFT)
#define   GUC_LOG_VERBOSITY_ULTRA	(3 << GUC_LOG_VERBOSITY_SHIFT)
/* Verbosity range-check limits, without the shift */
#define	  GUC_LOG_VERBOSITY_MIN		0
#define	  GUC_LOG_VERBOSITY_MAX		3
#define	  GUC_LOG_VERBOSITY_MASK	0x0000000f
#define	  GUC_LOG_DESTINATION_MASK	(3 << 4)
#define   GUC_LOG_DISABLED		(1 << 6)
#define   GUC_PROFILE_ENABLED		(1 << 7)
#define   GUC_WQ_TRACK_ENABLED		(1 << 8)
#define   GUC_ADS_ENABLED		(1 << 9)
#define   GUC_LOG_DEFAULT_DISABLED	(1 << 10)
#define   GUC_ADS_ADDR_SHIFT		11
#define   GUC_ADS_ADDR_MASK		0xfffff800

#define GUC_CTL_RSRVD			9

#define GUC_CTL_MAX_DWORDS		(SOFT_SCRATCH_COUNT - 2) /* [1..14] */

/**
 * DOC: GuC Firmware Layout
 *
 * The GuC firmware layout looks like this:
 *
 *     +-------------------------------+
 *     |         uc_css_header         |
 *     |                               |
 *     | contains major/minor version  |
 *     +-------------------------------+
 *     |             uCode             |
 *     +-------------------------------+
 *     |         RSA signature         |
 *     +-------------------------------+
 *     |          modulus key          |
 *     +-------------------------------+
 *     |          exponent val         |
 *     +-------------------------------+
 *
 * The firmware may or may not have modulus key and exponent data. The header,
 * uCode and RSA signature are must-have components that will be used by driver.
 * Length of each components, which is all in dwords, can be found in header.
 * In the case that modulus and exponent are not present in fw, a.k.a truncated
 * image, the length value still appears in header.
 *
 * Driver will do some basic fw size validation based on the following rules:
 *
 * 1. Header, uCode and RSA are must-have components.
 * 2. All firmware components, if they present, are in the sequence illustrated
 *    in the layout table above.
 * 3. Length info of each component can be found in header, in dwords.
 * 4. Modulus and exponent key are not required by driver. They may not appear
 *    in fw. So driver will load a truncated firmware in this case.
 *
 * HuC firmware layout is same as GuC firmware.
 *
 * HuC firmware css header is different. However, the only difference is where
 * the version information is saved. The uc_css_header is unified to support
 * both. Driver should get HuC version from uc_css_header.huc_sw_version, while
 * uc_css_header.guc_sw_version for GuC.
 */

struct uc_css_header {
	u32 module_type;
	/* header_size includes all non-uCode bits, including css_header, rsa
	 * key, modulus key and exponent data. */
	u32 header_size_dw;
	u32 header_version;
	u32 module_id;
	u32 module_vendor;
	union {
		struct {
			u8 day;
			u8 month;
			u16 year;
		};
		u32 date;
	};
	u32 size_dw; /* uCode plus header_size_dw */
	u32 key_size_dw;
	u32 modulus_size_dw;
	u32 exponent_size_dw;
	union {
		struct {
			u8 hour;
			u8 min;
			u16 sec;
		};
		u32 time;
	};

	char username[8];
	char buildnumber[12];
	union {
		struct {
			u32 branch_client_version;
			u32 sw_version;
	} guc;
		struct {
			u32 sw_version;
			u32 reserved;
	} huc;
	};
	u32 prod_preprod_fw;
	u32 reserved[12];
	u32 header_info;
} __packed;

struct guc_doorbell_info {
	u32 db_status;
	u32 cookie;
	u32 reserved[14];
} __packed;

union guc_doorbell_qw {
	struct {
		u32 db_status;
		u32 cookie;
	};
	u64 value_qw;
} __packed;

#define GUC_NUM_DOORBELLS	256
#define GUC_DOORBELL_INVALID	(GUC_NUM_DOORBELLS)

#define GUC_DB_SIZE			(PAGE_SIZE)
#define GUC_WQ_SIZE			(PAGE_SIZE * 2)

/* Work item for submitting workloads into work queue of GuC. */
struct guc_wq_item {
	u32 header;
	u32 context_desc;
	u32 submit_element_info;
	u32 fence_id;
} __packed;

struct guc_process_desc {
	u32 stage_id;
	u64 db_base_addr;
	u32 head;
	u32 tail;
	u32 error_offset;
	u64 wq_base_addr;
	u32 wq_size_bytes;
	u32 wq_status;
	u32 engine_presence;
	u32 priority;
	u32 reserved[30];
} __packed;

/* engine id and context id is packed into guc_execlist_context.context_id*/
#define GUC_ELC_CTXID_OFFSET		0
#define GUC_ELC_ENGINE_OFFSET		29

/* The execlist context including software and HW information */
struct guc_execlist_context {
	u32 context_desc;
	u32 context_id;
	u32 ring_status;
	u32 ring_lrca;
	u32 ring_begin;
	u32 ring_end;
	u32 ring_next_free_location;
	u32 ring_current_tail_pointer_value;
	u8 engine_state_submit_value;
	u8 engine_state_wait_value;
	u16 pagefault_count;
	u16 engine_submit_queue_count;
} __packed;

/*
 * This structure describes a stage set arranged for a particular communication
 * between uKernel (GuC) and Driver (KMD). Technically, this is known as a
 * "GuC Context descriptor" in the specs, but we use the term "stage descriptor"
 * to avoid confusion with all the other things already named "context" in the
 * driver. A static pool of these descriptors are stored inside a GEM object
 * (stage_desc_pool) which is held for the entire lifetime of our interaction
 * with the GuC, being allocated before the GuC is loaded with its firmware.
 */
struct guc_stage_desc {
	u32 sched_common_area;
	u32 stage_id;
	u32 pas_id;
	u8 engines_used;
	u64 db_trigger_cpu;
	u32 db_trigger_uk;
	u64 db_trigger_phy;
	u16 db_id;

	struct guc_execlist_context lrc[GUC_MAX_ENGINES_NUM];

	u8 attribute;

	u32 priority;

	u32 wq_sampled_tail_offset;
	u32 wq_total_submit_enqueues;

	u32 process_desc;
	u32 wq_addr;
	u32 wq_size;

	u32 engine_presence;

	u8 engine_suspended;

	u8 reserved0[3];
	u64 reserved1[1];

	u64 desc_private;
} __packed;

/**
 * DOC: CTB based communication
 *
 * The CTB (command transport buffer) communication between Host and GuC
 * is based on u32 data stream written to the shared buffer. One buffer can
 * be used to transmit data only in one direction (one-directional channel).
 *
 * Current status of the each buffer is stored in the buffer descriptor.
 * Buffer descriptor holds tail and head fields that represents active data
 * stream. The tail field is updated by the data producer (sender), and head
 * field is updated by the data consumer (receiver)::
 *
 *      +------------+
 *      | DESCRIPTOR |          +=================+============+========+
 *      +============+          |                 | MESSAGE(s) |        |
 *      | address    |--------->+=================+============+========+
 *      +------------+
 *      | head       |          ^-----head--------^
 *      +------------+
 *      | tail       |          ^---------tail-----------------^
 *      +------------+
 *      | size       |          ^---------------size--------------------^
 *      +------------+
 *
 * Each message in data stream starts with the single u32 treated as a header,
 * followed by optional set of u32 data that makes message specific payload::
 *
 *      +------------+---------+---------+---------+
 *      |         MESSAGE                          |
 *      +------------+---------+---------+---------+
 *      |   msg[0]   |   [1]   |   ...   |  [n-1]  |
 *      +------------+---------+---------+---------+
 *      |   MESSAGE  |       MESSAGE PAYLOAD       |
 *      +   HEADER   +---------+---------+---------+
 *      |            |    0    |   ...   |    n    |
 *      +======+=====+=========+=========+=========+
 *      | 31:16| code|         |         |         |
 *      +------+-----+         |         |         |
 *      |  15:5|flags|         |         |         |
 *      +------+-----+         |         |         |
 *      |   4:0|  len|         |         |         |
 *      +------+-----+---------+---------+---------+
 *
 *                   ^-------------len-------------^
 *
 * The message header consists of:
 *
 * - **len**, indicates length of the message payload (in u32)
 * - **code**, indicates message code
 * - **flags**, holds various bits to control message handling
 */

/*
 * Describes single command transport buffer.
 * Used by both guc-master and clients.
 */
struct guc_ct_buffer_desc {
	u32 addr;		/* gfx address */
	u64 host_private;	/* host private data */
	u32 size;		/* size in bytes */
	u32 head;		/* offset updated by GuC*/
	u32 tail;		/* offset updated by owner */
	u32 is_in_error;	/* error indicator */
	u32 fence;		/* fence updated by GuC */
	u32 status;		/* status updated by GuC */
	u32 owner;		/* id of the channel owner */
	u32 owner_sub_id;	/* owner-defined field for extra tracking */
	u32 reserved[5];
} __packed;

/* Type of command transport buffer */
#define INTEL_GUC_CT_BUFFER_TYPE_SEND	0x0u
#define INTEL_GUC_CT_BUFFER_TYPE_RECV	0x1u

/*
 * Definition of the command transport message header (DW0)
 *
 * bit[4..0]	message len (in dwords)
 * bit[7..5]	reserved
 * bit[8]	write fence to desc
 * bit[9]	write status to H2G buff
 * bit[10]	send status (via G2H)
 * bit[15..11]	reserved
 * bit[31..16]	action code
 */
#define GUC_CT_MSG_LEN_SHIFT			0
#define GUC_CT_MSG_LEN_MASK			0x1F
#define GUC_CT_MSG_WRITE_FENCE_TO_DESC		(1 << 8)
#define GUC_CT_MSG_WRITE_STATUS_TO_BUFF		(1 << 9)
#define GUC_CT_MSG_SEND_STATUS			(1 << 10)
#define GUC_CT_MSG_ACTION_SHIFT			16
#define GUC_CT_MSG_ACTION_MASK			0xFFFF

#define GUC_FORCEWAKE_RENDER	(1 << 0)
#define GUC_FORCEWAKE_MEDIA	(1 << 1)

#define GUC_POWER_UNSPECIFIED	0
#define GUC_POWER_D0		1
#define GUC_POWER_D1		2
#define GUC_POWER_D2		3
#define GUC_POWER_D3		4

/* Scheduling policy settings */

/* Reset engine upon preempt failure */
#define POLICY_RESET_ENGINE		(1<<0)
/* Preempt to idle on quantum expiry */
#define POLICY_PREEMPT_TO_IDLE		(1<<1)

#define POLICY_MAX_NUM_WI 15
#define POLICY_DEFAULT_DPC_PROMOTE_TIME_US 500000
#define POLICY_DEFAULT_EXECUTION_QUANTUM_US 1000000
#define POLICY_DEFAULT_PREEMPTION_TIME_US 500000
#define POLICY_DEFAULT_FAULT_TIME_US 250000

struct guc_policy {
	/* Time for one workload to execute. (in micro seconds) */
	u32 execution_quantum;
	u32 reserved1;

	/* Time to wait for a preemption request to completed before issuing a
	 * reset. (in micro seconds). */
	u32 preemption_time;

	/* How much time to allow to run after the first fault is observed.
	 * Then preempt afterwards. (in micro seconds) */
	u32 fault_time;

	u32 policy_flags;
	u32 reserved[2];
} __packed;

struct guc_policies {
	struct guc_policy policy[GUC_CLIENT_PRIORITY_NUM][GUC_MAX_ENGINES_NUM];

	/* In micro seconds. How much time to allow before DPC processing is
	 * called back via interrupt (to prevent DPC queue drain starving).
	 * Typically 1000s of micro seconds (example only, not granularity). */
	u32 dpc_promote_time;

	/* Must be set to take these new values. */
	u32 is_valid;

	/* Max number of WIs to process per call. A large value may keep CS
	 * idle. */
	u32 max_num_work_items;

	u32 reserved[19];
} __packed;

/* GuC MMIO reg state struct */

#define GUC_REGSET_FLAGS_NONE		0x0
#define GUC_REGSET_POWERCYCLE		0x1
#define GUC_REGSET_MASKED		0x2
#define GUC_REGSET_ENGINERESET		0x4
#define GUC_REGSET_SAVE_DEFAULT_VALUE	0x8
#define GUC_REGSET_SAVE_CURRENT_VALUE	0x10

#define GUC_REGSET_MAX_REGISTERS	25
#define GUC_MMIO_WHITE_LIST_START	0x24d0
#define GUC_MMIO_WHITE_LIST_MAX		12
#define GUC_S3_SAVE_SPACE_PAGES		10

struct guc_mmio_regset {
	struct __packed {
		u32 offset;
		u32 value;
		u32 flags;
	} registers[GUC_REGSET_MAX_REGISTERS];

	u32 values_valid;
	u32 number_of_registers;
} __packed;

/* MMIO registers that are set as non privileged */
struct mmio_white_list {
	u32 mmio_start;
	u32 offsets[GUC_MMIO_WHITE_LIST_MAX];
	u32 count;
} __packed;

struct guc_mmio_reg_state {
	struct guc_mmio_regset global_reg;
	struct guc_mmio_regset engine_reg[GUC_MAX_ENGINES_NUM];
	struct mmio_white_list white_list[GUC_MAX_ENGINES_NUM];
} __packed;

/* GuC Additional Data Struct */

struct guc_ads {
	u32 reg_state_addr;
	u32 reg_state_buffer;
	u32 golden_context_lrca;
	u32 scheduler_policies;
	u32 reserved0[3];
	u32 eng_state_size[GUC_MAX_ENGINES_NUM];
	u32 reserved2[4];
} __packed;

/* GuC logging structures */

enum guc_log_buffer_type {
	GUC_ISR_LOG_BUFFER,
	GUC_DPC_LOG_BUFFER,
	GUC_CRASH_DUMP_LOG_BUFFER,
	GUC_MAX_LOG_BUFFER
};

/**
 * Below state structure is used for coordination of retrieval of GuC firmware
 * logs. Separate state is maintained for each log buffer type.
 * read_ptr points to the location where i915 read last in log buffer and
 * is read only for GuC firmware. write_ptr is incremented by GuC with number
 * of bytes written for each log entry and is read only for i915.
 * When any type of log buffer becomes half full, GuC sends a flush interrupt.
 * GuC firmware expects that while it is writing to 2nd half of the buffer,
 * first half would get consumed by Host and then get a flush completed
 * acknowledgment from Host, so that it does not end up doing any overwrite
 * causing loss of logs. So when buffer gets half filled & i915 has requested
 * for interrupt, GuC will set flush_to_file field, set the sampled_write_ptr
 * to the value of write_ptr and raise the interrupt.
 * On receiving the interrupt i915 should read the buffer, clear flush_to_file
 * field and also update read_ptr with the value of sample_write_ptr, before
 * sending an acknowledgment to GuC. marker & version fields are for internal
 * usage of GuC and opaque to i915. buffer_full_cnt field is incremented every
 * time GuC detects the log buffer overflow.
 */
struct guc_log_buffer_state {
	u32 marker[2];
	u32 read_ptr;
	u32 write_ptr;
	u32 size;
	u32 sampled_write_ptr;
	union {
		struct {
			u32 flush_to_file:1;
			u32 buffer_full_cnt:4;
			u32 reserved:27;
		};
		u32 flags;
	};
	u32 version;
} __packed;

struct guc_ctx_report {
	u32 report_return_status;
	u32 reserved1[64];
	u32 affected_count;
	u32 reserved2[2];
} __packed;

/* GuC Shared Context Data Struct */
struct guc_shared_ctx_data {
	u32 addr_of_last_preempted_data_low;
	u32 addr_of_last_preempted_data_high;
	u32 addr_of_last_preempted_data_high_tmp;
	u32 padding;
	u32 is_mapped_to_proxy;
	u32 proxy_ctx_id;
	u32 engine_reset_ctx_id;
	u32 media_reset_count;
	u32 reserved1[8];
	u32 uk_last_ctx_switch_reason;
	u32 was_reset;
	u32 lrca_gpu_addr;
	u64 execlist_ctx;
	u32 reserved2[66];
	struct guc_ctx_report preempt_ctx_report[GUC_MAX_ENGINES_NUM];
} __packed;

/**
 * DOC: MMIO based communication
 *
 * The MMIO based communication between Host and GuC uses software scratch
 * registers, where first register holds data treated as message header,
 * and other registers are used to hold message payload.
 *
 * For Gen9+, GuC uses software scratch registers 0xC180-0xC1B8
 *
 *      +-----------+---------+---------+---------+
 *      |  MMIO[0]  | MMIO[1] |   ...   | MMIO[n] |
 *      +-----------+---------+---------+---------+
 *      | header    |      optional payload       |
 *      +======+====+=========+=========+=========+
 *      | 31:28|type|         |         |         |
 *      +------+----+         |         |         |
 *      | 27:16|data|         |         |         |
 *      +------+----+         |         |         |
 *      |  15:0|code|         |         |         |
 *      +------+----+---------+---------+---------+
 *
 * The message header consists of:
 *
 * - **type**, indicates message type
 * - **code**, indicates message code, is specific for **type**
 * - **data**, indicates message data, optional, depends on **code**
 *
 * The following message **types** are supported:
 *
 * - **REQUEST**, indicates Host-to-GuC request, requested GuC action code
 *   must be priovided in **code** field. Optional action specific parameters
 *   can be provided in remaining payload registers or **data** field.
 *
 * - **RESPONSE**, indicates GuC-to-Host response from earlier GuC request,
 *   action response status will be provided in **code** field. Optional
 *   response data can be returned in remaining payload registers or **data**
 *   field.
 */

#define INTEL_GUC_MSG_TYPE_SHIFT	28
#define INTEL_GUC_MSG_TYPE_MASK		(0xF << INTEL_GUC_MSG_TYPE_SHIFT)
#define INTEL_GUC_MSG_DATA_SHIFT	16
#define INTEL_GUC_MSG_DATA_MASK		(0xFFF << INTEL_GUC_MSG_DATA_SHIFT)
#define INTEL_GUC_MSG_CODE_SHIFT	0
#define INTEL_GUC_MSG_CODE_MASK		(0xFFFF << INTEL_GUC_MSG_CODE_SHIFT)

#define __INTEL_GUC_MSG_GET(T, m) \
	(((m) & INTEL_GUC_MSG_ ## T ## _MASK) >> INTEL_GUC_MSG_ ## T ## _SHIFT)
#define INTEL_GUC_MSG_TO_TYPE(m)	__INTEL_GUC_MSG_GET(TYPE, m)
#define INTEL_GUC_MSG_TO_DATA(m)	__INTEL_GUC_MSG_GET(DATA, m)
#define INTEL_GUC_MSG_TO_CODE(m)	__INTEL_GUC_MSG_GET(CODE, m)

enum intel_guc_msg_type {
	INTEL_GUC_MSG_TYPE_REQUEST = 0x0,
	INTEL_GUC_MSG_TYPE_RESPONSE = 0xF,
};

#define __INTEL_GUC_MSG_TYPE_IS(T, m) \
	(INTEL_GUC_MSG_TO_TYPE(m) == INTEL_GUC_MSG_TYPE_ ## T)
#define INTEL_GUC_MSG_IS_REQUEST(m)	__INTEL_GUC_MSG_TYPE_IS(REQUEST, m)
#define INTEL_GUC_MSG_IS_RESPONSE(m)	__INTEL_GUC_MSG_TYPE_IS(RESPONSE, m)

enum intel_guc_action {
	INTEL_GUC_ACTION_DEFAULT = 0x0,
	INTEL_GUC_ACTION_REQUEST_PREEMPTION = 0x2,
	INTEL_GUC_ACTION_REQUEST_ENGINE_RESET = 0x3,
	INTEL_GUC_ACTION_SAMPLE_FORCEWAKE = 0x6,
	INTEL_GUC_ACTION_ALLOCATE_DOORBELL = 0x10,
	INTEL_GUC_ACTION_DEALLOCATE_DOORBELL = 0x20,
	INTEL_GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30,
	INTEL_GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302,
	INTEL_GUC_ACTION_ENTER_S_STATE = 0x501,
	INTEL_GUC_ACTION_EXIT_S_STATE = 0x502,
	INTEL_GUC_ACTION_SLPC_REQUEST = 0x3003,
	INTEL_GUC_ACTION_AUTHENTICATE_HUC = 0x4000,
	INTEL_GUC_ACTION_REGISTER_COMMAND_TRANSPORT_BUFFER = 0x4505,
	INTEL_GUC_ACTION_DEREGISTER_COMMAND_TRANSPORT_BUFFER = 0x4506,
	INTEL_GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x0E000,
	INTEL_GUC_ACTION_LIMIT
};

enum intel_guc_preempt_options {
	INTEL_GUC_PREEMPT_OPTION_DROP_WORK_Q = 0x4,
	INTEL_GUC_PREEMPT_OPTION_DROP_SUBMIT_Q = 0x8,
};

enum intel_guc_report_status {
	INTEL_GUC_REPORT_STATUS_UNKNOWN = 0x0,
	INTEL_GUC_REPORT_STATUS_ACKED = 0x1,
	INTEL_GUC_REPORT_STATUS_ERROR = 0x2,
	INTEL_GUC_REPORT_STATUS_COMPLETE = 0x4,
};

#define GUC_LOG_CONTROL_LOGGING_ENABLED	(1 << 0)
#define GUC_LOG_CONTROL_VERBOSITY_SHIFT	4
#define GUC_LOG_CONTROL_VERBOSITY_MASK	(0xF << GUC_LOG_CONTROL_VERBOSITY_SHIFT)
#define GUC_LOG_CONTROL_DEFAULT_LOGGING	(1 << 8)

enum intel_guc_response_status {
	INTEL_GUC_RESPONSE_STATUS_SUCCESS = 0x0,
	INTEL_GUC_RESPONSE_STATUS_GENERIC_FAIL = 0xF000,
};

#define INTEL_GUC_MSG_IS_RESPONSE_SUCCESS(m) \
	 (typecheck(u32, (m)) && \
	  ((m) & (INTEL_GUC_MSG_TYPE_MASK | INTEL_GUC_MSG_CODE_MASK)) == \
	  ((INTEL_GUC_MSG_TYPE_RESPONSE << INTEL_GUC_MSG_TYPE_SHIFT) | \
	   (INTEL_GUC_RESPONSE_STATUS_SUCCESS << INTEL_GUC_MSG_CODE_SHIFT)))

/* This action will be programmed in C1BC - SOFT_SCRATCH_15_REG */
enum intel_guc_recv_message {
	INTEL_GUC_RECV_MSG_CRASH_DUMP_POSTED = BIT(1),
	INTEL_GUC_RECV_MSG_FLUSH_LOG_BUFFER = BIT(3)
};

#endif