123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220 |
- /*
- * GPIO controller in LSI ZEVIO SoCs.
- *
- * Author: Fabian Vogt <fabian@ritter-vogt.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/spinlock.h>
- #include <linux/errno.h>
- #include <linux/init.h>
- #include <linux/bitops.h>
- #include <linux/io.h>
- #include <linux/of_device.h>
- #include <linux/of_gpio.h>
- #include <linux/slab.h>
- #include <linux/gpio.h>
- /*
- * Memory layout:
- * This chip has four gpio sections, each controls 8 GPIOs.
- * Bit 0 in section 0 is GPIO 0, bit 2 in section 1 is GPIO 10.
- * Disclaimer: Reverse engineered!
- * For more information refer to:
- * http://hackspire.unsads.com/wiki/index.php/Memory-mapped_I/O_ports#90000000_-_General_Purpose_I.2FO_.28GPIO.29
- *
- * 0x00-0x3F: Section 0
- * +0x00: Masked interrupt status (read-only)
- * +0x04: R: Interrupt status W: Reset interrupt status
- * +0x08: R: Interrupt mask W: Mask interrupt
- * +0x0C: W: Unmask interrupt (write-only)
- * +0x10: Direction: I/O=1/0
- * +0x14: Output
- * +0x18: Input (read-only)
- * +0x20: R: Level interrupt W: Set as level interrupt
- * 0x40-0x7F: Section 1
- * 0x80-0xBF: Section 2
- * 0xC0-0xFF: Section 3
- */
- #define ZEVIO_GPIO_SECTION_SIZE 0x40
- /* Offsets to various registers */
- #define ZEVIO_GPIO_INT_MASKED_STATUS 0x00
- #define ZEVIO_GPIO_INT_STATUS 0x04
- #define ZEVIO_GPIO_INT_UNMASK 0x08
- #define ZEVIO_GPIO_INT_MASK 0x0C
- #define ZEVIO_GPIO_DIRECTION 0x10
- #define ZEVIO_GPIO_OUTPUT 0x14
- #define ZEVIO_GPIO_INPUT 0x18
- #define ZEVIO_GPIO_INT_STICKY 0x20
- /* Bit number of GPIO in its section */
- #define ZEVIO_GPIO_BIT(gpio) (gpio&7)
- struct zevio_gpio {
- spinlock_t lock;
- struct of_mm_gpio_chip chip;
- };
- static inline u32 zevio_gpio_port_get(struct zevio_gpio *c, unsigned pin,
- unsigned port_offset)
- {
- unsigned section_offset = ((pin >> 3) & 3)*ZEVIO_GPIO_SECTION_SIZE;
- return readl(IOMEM(c->chip.regs + section_offset + port_offset));
- }
- static inline void zevio_gpio_port_set(struct zevio_gpio *c, unsigned pin,
- unsigned port_offset, u32 val)
- {
- unsigned section_offset = ((pin >> 3) & 3)*ZEVIO_GPIO_SECTION_SIZE;
- writel(val, IOMEM(c->chip.regs + section_offset + port_offset));
- }
- /* Functions for struct gpio_chip */
- static int zevio_gpio_get(struct gpio_chip *chip, unsigned pin)
- {
- struct zevio_gpio *controller = gpiochip_get_data(chip);
- u32 val, dir;
- spin_lock(&controller->lock);
- dir = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION);
- if (dir & BIT(ZEVIO_GPIO_BIT(pin)))
- val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_INPUT);
- else
- val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT);
- spin_unlock(&controller->lock);
- return (val >> ZEVIO_GPIO_BIT(pin)) & 0x1;
- }
- static void zevio_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
- {
- struct zevio_gpio *controller = gpiochip_get_data(chip);
- u32 val;
- spin_lock(&controller->lock);
- val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT);
- if (value)
- val |= BIT(ZEVIO_GPIO_BIT(pin));
- else
- val &= ~BIT(ZEVIO_GPIO_BIT(pin));
- zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_OUTPUT, val);
- spin_unlock(&controller->lock);
- }
- static int zevio_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
- {
- struct zevio_gpio *controller = gpiochip_get_data(chip);
- u32 val;
- spin_lock(&controller->lock);
- val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION);
- val |= BIT(ZEVIO_GPIO_BIT(pin));
- zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_DIRECTION, val);
- spin_unlock(&controller->lock);
- return 0;
- }
- static int zevio_gpio_direction_output(struct gpio_chip *chip,
- unsigned pin, int value)
- {
- struct zevio_gpio *controller = gpiochip_get_data(chip);
- u32 val;
- spin_lock(&controller->lock);
- val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT);
- if (value)
- val |= BIT(ZEVIO_GPIO_BIT(pin));
- else
- val &= ~BIT(ZEVIO_GPIO_BIT(pin));
- zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_OUTPUT, val);
- val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION);
- val &= ~BIT(ZEVIO_GPIO_BIT(pin));
- zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_DIRECTION, val);
- spin_unlock(&controller->lock);
- return 0;
- }
- static int zevio_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
- {
- /*
- * TODO: Implement IRQs.
- * Not implemented yet due to weird lockups
- */
- return -ENXIO;
- }
- static const struct gpio_chip zevio_gpio_chip = {
- .direction_input = zevio_gpio_direction_input,
- .direction_output = zevio_gpio_direction_output,
- .set = zevio_gpio_set,
- .get = zevio_gpio_get,
- .to_irq = zevio_gpio_to_irq,
- .base = 0,
- .owner = THIS_MODULE,
- .ngpio = 32,
- .of_gpio_n_cells = 2,
- };
- /* Initialization */
- static int zevio_gpio_probe(struct platform_device *pdev)
- {
- struct zevio_gpio *controller;
- int status, i;
- controller = devm_kzalloc(&pdev->dev, sizeof(*controller), GFP_KERNEL);
- if (!controller)
- return -ENOMEM;
- platform_set_drvdata(pdev, controller);
- /* Copy our reference */
- controller->chip.gc = zevio_gpio_chip;
- controller->chip.gc.parent = &pdev->dev;
- status = of_mm_gpiochip_add_data(pdev->dev.of_node,
- &(controller->chip),
- controller);
- if (status) {
- dev_err(&pdev->dev, "failed to add gpiochip: %d\n", status);
- return status;
- }
- spin_lock_init(&controller->lock);
- /* Disable interrupts, they only cause errors */
- for (i = 0; i < controller->chip.gc.ngpio; i += 8)
- zevio_gpio_port_set(controller, i, ZEVIO_GPIO_INT_MASK, 0xFF);
- dev_dbg(controller->chip.gc.parent, "ZEVIO GPIO controller set up!\n");
- return 0;
- }
- static const struct of_device_id zevio_gpio_of_match[] = {
- { .compatible = "lsi,zevio-gpio", },
- { },
- };
- static struct platform_driver zevio_gpio_driver = {
- .driver = {
- .name = "gpio-zevio",
- .of_match_table = zevio_gpio_of_match,
- .suppress_bind_attrs = true,
- },
- .probe = zevio_gpio_probe,
- };
- builtin_platform_driver(zevio_gpio_driver);
|