123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116 |
- // SPDX-License-Identifier: GPL-2.0+
- // Copyright (C) 2008-2009 The GameCube Linux Team
- // Copyright (C) 2008,2009 Albert Herranz
- // Copyright (C) 2017-2018 Jonathan Neuschäfer
- //
- // Nintendo Wii (Hollywood) GPIO driver
- #include <linux/gpio/driver.h>
- #include <linux/io.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/of_platform.h>
- #include <linux/slab.h>
- /*
- * Register names and offsets courtesy of WiiBrew:
- * https://wiibrew.org/wiki/Hardware/Hollywood_GPIOs
- *
- * Note that for most registers, there are two versions:
- * - HW_GPIOB_* Is always accessible by the Broadway PowerPC core, but does
- * always give access to all GPIO lines
- * - HW_GPIO_* Is only accessible by the Broadway PowerPC code if the memory
- * firewall (AHBPROT) in the Hollywood chipset has been configured to allow
- * such access.
- *
- * The ownership of each GPIO line can be configured in the HW_GPIO_OWNER
- * register: A one bit configures the line for access via the HW_GPIOB_*
- * registers, a zero bit indicates access via HW_GPIO_*. This driver uses
- * HW_GPIOB_*.
- */
- #define HW_GPIOB_OUT 0x00
- #define HW_GPIOB_DIR 0x04
- #define HW_GPIOB_IN 0x08
- #define HW_GPIOB_INTLVL 0x0c
- #define HW_GPIOB_INTFLAG 0x10
- #define HW_GPIOB_INTMASK 0x14
- #define HW_GPIOB_INMIR 0x18
- #define HW_GPIO_ENABLE 0x1c
- #define HW_GPIO_OUT 0x20
- #define HW_GPIO_DIR 0x24
- #define HW_GPIO_IN 0x28
- #define HW_GPIO_INTLVL 0x2c
- #define HW_GPIO_INTFLAG 0x30
- #define HW_GPIO_INTMASK 0x34
- #define HW_GPIO_INMIR 0x38
- #define HW_GPIO_OWNER 0x3c
- struct hlwd_gpio {
- struct gpio_chip gpioc;
- void __iomem *regs;
- };
- static int hlwd_gpio_probe(struct platform_device *pdev)
- {
- struct hlwd_gpio *hlwd;
- struct resource *regs_resource;
- u32 ngpios;
- int res;
- hlwd = devm_kzalloc(&pdev->dev, sizeof(*hlwd), GFP_KERNEL);
- if (!hlwd)
- return -ENOMEM;
- regs_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hlwd->regs = devm_ioremap_resource(&pdev->dev, regs_resource);
- if (IS_ERR(hlwd->regs))
- return PTR_ERR(hlwd->regs);
- /*
- * Claim all GPIOs using the OWNER register. This will not work on
- * systems where the AHBPROT memory firewall hasn't been configured to
- * permit PPC access to HW_GPIO_*.
- *
- * Note that this has to happen before bgpio_init reads the
- * HW_GPIOB_OUT and HW_GPIOB_DIR, because otherwise it reads the wrong
- * values.
- */
- iowrite32be(0xffffffff, hlwd->regs + HW_GPIO_OWNER);
- res = bgpio_init(&hlwd->gpioc, &pdev->dev, 4,
- hlwd->regs + HW_GPIOB_IN, hlwd->regs + HW_GPIOB_OUT,
- NULL, hlwd->regs + HW_GPIOB_DIR, NULL,
- BGPIOF_BIG_ENDIAN_BYTE_ORDER);
- if (res < 0) {
- dev_warn(&pdev->dev, "bgpio_init failed: %d\n", res);
- return res;
- }
- res = of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpios);
- if (res)
- ngpios = 32;
- hlwd->gpioc.ngpio = ngpios;
- return devm_gpiochip_add_data(&pdev->dev, &hlwd->gpioc, hlwd);
- }
- static const struct of_device_id hlwd_gpio_match[] = {
- { .compatible = "nintendo,hollywood-gpio", },
- {},
- };
- MODULE_DEVICE_TABLE(of, hlwd_gpio_match);
- static struct platform_driver hlwd_gpio_driver = {
- .driver = {
- .name = "gpio-hlwd",
- .of_match_table = hlwd_gpio_match,
- },
- .probe = hlwd_gpio_probe,
- };
- module_platform_driver(hlwd_gpio_driver);
- MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
- MODULE_DESCRIPTION("Nintendo Wii GPIO driver");
- MODULE_LICENSE("GPL");
|