123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103 |
- /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
- /*
- * ipmi_smi.h
- *
- * MontaVista IPMI system management interface
- *
- * Author: MontaVista Software, Inc.
- * Corey Minyard <minyard@mvista.com>
- * source@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- */
- #ifndef __LINUX_IPMI_MSGDEFS_H
- #define __LINUX_IPMI_MSGDEFS_H
- /* Various definitions for IPMI messages used by almost everything in
- the IPMI stack. */
- /* NetFNs and commands used inside the IPMI stack. */
- #define IPMI_NETFN_SENSOR_EVENT_REQUEST 0x04
- #define IPMI_NETFN_SENSOR_EVENT_RESPONSE 0x05
- #define IPMI_GET_EVENT_RECEIVER_CMD 0x01
- #define IPMI_NETFN_APP_REQUEST 0x06
- #define IPMI_NETFN_APP_RESPONSE 0x07
- #define IPMI_GET_DEVICE_ID_CMD 0x01
- #define IPMI_COLD_RESET_CMD 0x02
- #define IPMI_WARM_RESET_CMD 0x03
- #define IPMI_CLEAR_MSG_FLAGS_CMD 0x30
- #define IPMI_GET_DEVICE_GUID_CMD 0x08
- #define IPMI_GET_MSG_FLAGS_CMD 0x31
- #define IPMI_SEND_MSG_CMD 0x34
- #define IPMI_GET_MSG_CMD 0x33
- #define IPMI_SET_BMC_GLOBAL_ENABLES_CMD 0x2e
- #define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f
- #define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35
- #define IPMI_GET_CHANNEL_INFO_CMD 0x42
- /* Bit for BMC global enables. */
- #define IPMI_BMC_RCV_MSG_INTR 0x01
- #define IPMI_BMC_EVT_MSG_INTR 0x02
- #define IPMI_BMC_EVT_MSG_BUFF 0x04
- #define IPMI_BMC_SYS_LOG 0x08
- #define IPMI_NETFN_STORAGE_REQUEST 0x0a
- #define IPMI_NETFN_STORAGE_RESPONSE 0x0b
- #define IPMI_ADD_SEL_ENTRY_CMD 0x44
- #define IPMI_NETFN_FIRMWARE_REQUEST 0x08
- #define IPMI_NETFN_FIRMWARE_RESPONSE 0x09
- /* The default slave address */
- #define IPMI_BMC_SLAVE_ADDR 0x20
- /* The BT interface on high-end HP systems supports up to 255 bytes in
- * one transfer. Its "virtual" BMC supports some commands that are longer
- * than 128 bytes. Use the full 256, plus NetFn/LUN, Cmd, cCode, plus
- * some overhead; it's not worth the effort to dynamically size this based
- * on the results of the "Get BT Capabilities" command. */
- #define IPMI_MAX_MSG_LENGTH 272 /* multiple of 16 */
- #define IPMI_CC_NO_ERROR 0x00
- #define IPMI_NODE_BUSY_ERR 0xc0
- #define IPMI_INVALID_COMMAND_ERR 0xc1
- #define IPMI_TIMEOUT_ERR 0xc3
- #define IPMI_ERR_MSG_TRUNCATED 0xc6
- #define IPMI_REQ_LEN_INVALID_ERR 0xc7
- #define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8
- #define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */
- #define IPMI_LOST_ARBITRATION_ERR 0x81
- #define IPMI_BUS_ERR 0x82
- #define IPMI_NAK_ON_WRITE_ERR 0x83
- #define IPMI_ERR_UNSPECIFIED 0xff
- #define IPMI_CHANNEL_PROTOCOL_IPMB 1
- #define IPMI_CHANNEL_PROTOCOL_ICMB 2
- #define IPMI_CHANNEL_PROTOCOL_SMBUS 4
- #define IPMI_CHANNEL_PROTOCOL_KCS 5
- #define IPMI_CHANNEL_PROTOCOL_SMIC 6
- #define IPMI_CHANNEL_PROTOCOL_BT10 7
- #define IPMI_CHANNEL_PROTOCOL_BT15 8
- #define IPMI_CHANNEL_PROTOCOL_TMODE 9
- #define IPMI_CHANNEL_MEDIUM_IPMB 1
- #define IPMI_CHANNEL_MEDIUM_ICMB10 2
- #define IPMI_CHANNEL_MEDIUM_ICMB09 3
- #define IPMI_CHANNEL_MEDIUM_8023LAN 4
- #define IPMI_CHANNEL_MEDIUM_ASYNC 5
- #define IPMI_CHANNEL_MEDIUM_OTHER_LAN 6
- #define IPMI_CHANNEL_MEDIUM_PCI_SMBUS 7
- #define IPMI_CHANNEL_MEDIUM_SMBUS1 8
- #define IPMI_CHANNEL_MEDIUM_SMBUS2 9
- #define IPMI_CHANNEL_MEDIUM_USB1 10
- #define IPMI_CHANNEL_MEDIUM_USB2 11
- #define IPMI_CHANNEL_MEDIUM_SYSINTF 12
- #define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60
- #define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f
- #endif /* __LINUX_IPMI_MSGDEFS_H */
|