123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262 |
- /*
- * ST SPEAr1310-miphy driver
- *
- * Copyright (C) 2014 ST Microelectronics
- * Pratyush Anand <pratyush.anand@gmail.com>
- * Mohit Kumar <mohit.kumar.dhaka@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
- #include <linux/bitops.h>
- #include <linux/delay.h>
- #include <linux/dma-mapping.h>
- #include <linux/kernel.h>
- #include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/of_device.h>
- #include <linux/phy/phy.h>
- #include <linux/regmap.h>
- /* SPEAr1310 Registers */
- #define SPEAR1310_PCIE_SATA_CFG 0x3A4
- #define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31)
- #define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30)
- #define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29)
- #define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31)
- #define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30)
- #define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29)
- #define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27)
- #define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26)
- #define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25)
- #define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24)
- #define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23)
- #define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22)
- #define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21)
- #define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20)
- #define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19)
- #define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18)
- #define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17)
- #define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16)
- #define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11)
- #define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10)
- #define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9)
- #define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8)
- #define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7)
- #define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6)
- #define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5)
- #define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4)
- #define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3)
- #define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2)
- #define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1)
- #define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0)
- #define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29)))
- #define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \
- BIT((x + 29)))
- #define SPEAR1310_PCIE_CFG_VAL(x) \
- (SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \
- SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \
- SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \
- SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \
- SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT)
- #define SPEAR1310_SATA_CFG_VAL(x) \
- (SPEAR1310_PCIE_SATA##x##_SEL_SATA | \
- SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \
- SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \
- SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \
- SPEAR1310_SATA##x##_CFG_TX_CLK_EN)
- #define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8
- #define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31)
- #define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28)
- #define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16)
- #define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15)
- #define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12)
- #define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0)
- #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF)
- #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16)
- #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \
- (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
- SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \
- SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \
- SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
- SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \
- SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60))
- #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
- (SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120))
- #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \
- (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \
- SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \
- SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \
- SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25))
- #define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC
- enum spear1310_miphy_mode {
- SATA,
- PCIE,
- };
- struct spear1310_miphy_priv {
- /* instance id of this phy */
- u32 id;
- /* phy mode: 0 for SATA 1 for PCIe */
- enum spear1310_miphy_mode mode;
- /* regmap for any soc specific misc registers */
- struct regmap *misc;
- /* phy struct pointer */
- struct phy *phy;
- };
- static int spear1310_miphy_pcie_init(struct spear1310_miphy_priv *priv)
- {
- u32 val;
- regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
- SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK,
- SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE);
- switch (priv->id) {
- case 0:
- val = SPEAR1310_PCIE_CFG_VAL(0);
- break;
- case 1:
- val = SPEAR1310_PCIE_CFG_VAL(1);
- break;
- case 2:
- val = SPEAR1310_PCIE_CFG_VAL(2);
- break;
- default:
- return -EINVAL;
- }
- regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
- SPEAR1310_PCIE_CFG_MASK(priv->id), val);
- return 0;
- }
- static int spear1310_miphy_pcie_exit(struct spear1310_miphy_priv *priv)
- {
- regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG,
- SPEAR1310_PCIE_CFG_MASK(priv->id), 0);
- regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1,
- SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, 0);
- return 0;
- }
- static int spear1310_miphy_init(struct phy *phy)
- {
- struct spear1310_miphy_priv *priv = phy_get_drvdata(phy);
- int ret = 0;
- if (priv->mode == PCIE)
- ret = spear1310_miphy_pcie_init(priv);
- return ret;
- }
- static int spear1310_miphy_exit(struct phy *phy)
- {
- struct spear1310_miphy_priv *priv = phy_get_drvdata(phy);
- int ret = 0;
- if (priv->mode == PCIE)
- ret = spear1310_miphy_pcie_exit(priv);
- return ret;
- }
- static const struct of_device_id spear1310_miphy_of_match[] = {
- { .compatible = "st,spear1310-miphy" },
- { },
- };
- MODULE_DEVICE_TABLE(of, spear1310_miphy_of_match);
- static const struct phy_ops spear1310_miphy_ops = {
- .init = spear1310_miphy_init,
- .exit = spear1310_miphy_exit,
- .owner = THIS_MODULE,
- };
- static struct phy *spear1310_miphy_xlate(struct device *dev,
- struct of_phandle_args *args)
- {
- struct spear1310_miphy_priv *priv = dev_get_drvdata(dev);
- if (args->args_count < 1) {
- dev_err(dev, "DT did not pass correct no of args\n");
- return ERR_PTR(-ENODEV);
- }
- priv->mode = args->args[0];
- if (priv->mode != SATA && priv->mode != PCIE) {
- dev_err(dev, "DT did not pass correct phy mode\n");
- return ERR_PTR(-ENODEV);
- }
- return priv->phy;
- }
- static int spear1310_miphy_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
- struct spear1310_miphy_priv *priv;
- struct phy_provider *phy_provider;
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
- priv->misc =
- syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
- if (IS_ERR(priv->misc)) {
- dev_err(dev, "failed to find misc regmap\n");
- return PTR_ERR(priv->misc);
- }
- if (of_property_read_u32(dev->of_node, "phy-id", &priv->id)) {
- dev_err(dev, "failed to find phy id\n");
- return -EINVAL;
- }
- priv->phy = devm_phy_create(dev, NULL, &spear1310_miphy_ops);
- if (IS_ERR(priv->phy)) {
- dev_err(dev, "failed to create SATA PCIe PHY\n");
- return PTR_ERR(priv->phy);
- }
- dev_set_drvdata(dev, priv);
- phy_set_drvdata(priv->phy, priv);
- phy_provider =
- devm_of_phy_provider_register(dev, spear1310_miphy_xlate);
- if (IS_ERR(phy_provider)) {
- dev_err(dev, "failed to register phy provider\n");
- return PTR_ERR(phy_provider);
- }
- return 0;
- }
- static struct platform_driver spear1310_miphy_driver = {
- .probe = spear1310_miphy_probe,
- .driver = {
- .name = "spear1310-miphy",
- .of_match_table = of_match_ptr(spear1310_miphy_of_match),
- },
- };
- module_platform_driver(spear1310_miphy_driver);
- MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver");
- MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>");
- MODULE_LICENSE("GPL v2");
|