en_selftest.c 5.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205
  1. /*
  2. * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
  3. *
  4. * This software is available to you under a choice of one of two
  5. * licenses. You may choose to be licensed under the terms of the GNU
  6. * General Public License (GPL) Version 2, available from the file
  7. * COPYING in the main directory of this source tree, or the
  8. * OpenIB.org BSD license below:
  9. *
  10. * Redistribution and use in source and binary forms, with or
  11. * without modification, are permitted provided that the following
  12. * conditions are met:
  13. *
  14. * - Redistributions of source code must retain the above
  15. * copyright notice, this list of conditions and the following
  16. * disclaimer.
  17. *
  18. * - Redistributions in binary form must reproduce the above
  19. * copyright notice, this list of conditions and the following
  20. * disclaimer in the documentation and/or other materials
  21. * provided with the distribution.
  22. *
  23. * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  24. * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  25. * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  26. * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  27. * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  28. * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  29. * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  30. * SOFTWARE.
  31. *
  32. */
  33. #include <linux/kernel.h>
  34. #include <linux/ethtool.h>
  35. #include <linux/netdevice.h>
  36. #include <linux/delay.h>
  37. #include <linux/mlx4/driver.h>
  38. #include "mlx4_en.h"
  39. static int mlx4_en_test_registers(struct mlx4_en_priv *priv)
  40. {
  41. return mlx4_cmd(priv->mdev->dev, 0, 0, 0, MLX4_CMD_HW_HEALTH_CHECK,
  42. MLX4_CMD_TIME_CLASS_A, MLX4_CMD_WRAPPED);
  43. }
  44. static int mlx4_en_test_loopback_xmit(struct mlx4_en_priv *priv)
  45. {
  46. struct sk_buff *skb;
  47. struct ethhdr *ethh;
  48. unsigned char *packet;
  49. unsigned int packet_size = MLX4_LOOPBACK_TEST_PAYLOAD;
  50. unsigned int i;
  51. int err;
  52. /* build the pkt before xmit */
  53. skb = netdev_alloc_skb(priv->dev, MLX4_LOOPBACK_TEST_PAYLOAD + ETH_HLEN + NET_IP_ALIGN);
  54. if (!skb)
  55. return -ENOMEM;
  56. skb_reserve(skb, NET_IP_ALIGN);
  57. ethh = skb_put(skb, sizeof(struct ethhdr));
  58. packet = skb_put(skb, packet_size);
  59. memcpy(ethh->h_dest, priv->dev->dev_addr, ETH_ALEN);
  60. eth_zero_addr(ethh->h_source);
  61. ethh->h_proto = htons(ETH_P_ARP);
  62. skb_reset_mac_header(skb);
  63. for (i = 0; i < packet_size; ++i) /* fill our packet */
  64. packet[i] = (unsigned char)(i & 0xff);
  65. /* xmit the pkt */
  66. err = mlx4_en_xmit(skb, priv->dev);
  67. return err;
  68. }
  69. static int mlx4_en_test_loopback(struct mlx4_en_priv *priv)
  70. {
  71. u32 loopback_ok = 0;
  72. int i;
  73. priv->loopback_ok = 0;
  74. priv->validate_loopback = 1;
  75. mlx4_en_update_loopback_state(priv->dev, priv->dev->features);
  76. /* xmit */
  77. if (mlx4_en_test_loopback_xmit(priv)) {
  78. en_err(priv, "Transmitting loopback packet failed\n");
  79. goto mlx4_en_test_loopback_exit;
  80. }
  81. /* polling for result */
  82. for (i = 0; i < MLX4_EN_LOOPBACK_RETRIES; ++i) {
  83. msleep(MLX4_EN_LOOPBACK_TIMEOUT);
  84. if (priv->loopback_ok) {
  85. loopback_ok = 1;
  86. break;
  87. }
  88. }
  89. if (!loopback_ok)
  90. en_err(priv, "Loopback packet didn't arrive\n");
  91. mlx4_en_test_loopback_exit:
  92. priv->validate_loopback = 0;
  93. mlx4_en_update_loopback_state(priv->dev, priv->dev->features);
  94. return !loopback_ok;
  95. }
  96. static int mlx4_en_test_interrupts(struct mlx4_en_priv *priv)
  97. {
  98. struct mlx4_en_dev *mdev = priv->mdev;
  99. int err = 0;
  100. int i = 0;
  101. err = mlx4_test_async(mdev->dev);
  102. /* When not in MSI_X or slave, test only async */
  103. if (!(mdev->dev->flags & MLX4_FLAG_MSI_X) || mlx4_is_slave(mdev->dev))
  104. return err;
  105. /* A loop over all completion vectors of current port,
  106. * for each vector check whether it works by mapping command
  107. * completions to that vector and performing a NOP command
  108. */
  109. for (i = 0; i < priv->rx_ring_num; i++) {
  110. err = mlx4_test_interrupt(mdev->dev, priv->rx_cq[i]->vector);
  111. if (err)
  112. break;
  113. }
  114. return err;
  115. }
  116. static int mlx4_en_test_link(struct mlx4_en_priv *priv)
  117. {
  118. if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
  119. return -ENOMEM;
  120. if (priv->port_state.link_state == 1)
  121. return 0;
  122. else
  123. return 1;
  124. }
  125. static int mlx4_en_test_speed(struct mlx4_en_priv *priv)
  126. {
  127. if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
  128. return -ENOMEM;
  129. /* The device supports 100M, 1G, 10G, 20G, 40G and 56G speed */
  130. if (priv->port_state.link_speed != SPEED_100 &&
  131. priv->port_state.link_speed != SPEED_1000 &&
  132. priv->port_state.link_speed != SPEED_10000 &&
  133. priv->port_state.link_speed != SPEED_20000 &&
  134. priv->port_state.link_speed != SPEED_40000 &&
  135. priv->port_state.link_speed != SPEED_56000)
  136. return priv->port_state.link_speed;
  137. return 0;
  138. }
  139. void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf)
  140. {
  141. struct mlx4_en_priv *priv = netdev_priv(dev);
  142. int i, carrier_ok;
  143. memset(buf, 0, sizeof(u64) * MLX4_EN_NUM_SELF_TEST);
  144. if (*flags & ETH_TEST_FL_OFFLINE) {
  145. /* disable the interface */
  146. carrier_ok = netif_carrier_ok(dev);
  147. netif_carrier_off(dev);
  148. /* Wait until all tx queues are empty.
  149. * there should not be any additional incoming traffic
  150. * since we turned the carrier off */
  151. msleep(200);
  152. if (priv->mdev->dev->caps.flags &
  153. MLX4_DEV_CAP_FLAG_UC_LOOPBACK) {
  154. buf[3] = mlx4_en_test_registers(priv);
  155. if (priv->port_up && dev->mtu >= MLX4_SELFTEST_LB_MIN_MTU)
  156. buf[4] = mlx4_en_test_loopback(priv);
  157. }
  158. if (carrier_ok)
  159. netif_carrier_on(dev);
  160. }
  161. buf[0] = mlx4_en_test_interrupts(priv);
  162. buf[1] = mlx4_en_test_link(priv);
  163. buf[2] = mlx4_en_test_speed(priv);
  164. for (i = 0; i < MLX4_EN_NUM_SELF_TEST; i++) {
  165. if (buf[i])
  166. *flags |= ETH_TEST_FL_FAILED;
  167. }
  168. }