abslibre/libre-testing/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install

extlinux_warning() {
  echo "==> WARNING: Remember to set up your kernels in /boot/extlinux/extlinux.conf"
}

flash_uboot() {
  echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0."
  echo "Do this now? [y|N]"
  read -r shouldwe
  if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then
    dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k
    dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k
  else
    echo "You can do this later by running:"
    echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k"
    echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k"
  fi
  extlinux_warning
}

post_install() {
  flash_uboot
}

post_upgrade() {
  flash_uboot
}