123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475 |
- /*
- * arch/arm/mach-ep93xx/simone.c
- * Simplemachines Sim.One support.
- *
- * Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com>
- *
- * Based on the 2.6.24.7 support:
- * Copyright (C) 2009 Simplemachines
- * MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- */
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/gpio.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- #include <mach/hardware.h>
- #include <mach/fb.h>
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
- static struct ep93xx_eth_data __initdata simone_eth_data = {
- .phy_id = 1,
- };
- static struct ep93xxfb_mach_info __initdata simone_fb_info = {
- .num_modes = EP93XXFB_USE_MODEDB,
- .bpp = 16,
- .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
- };
- static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
- .sda_pin = EP93XX_GPIO_LINE_EEDAT,
- .sda_is_open_drain = 0,
- .scl_pin = EP93XX_GPIO_LINE_EECLK,
- .scl_is_open_drain = 0,
- .udelay = 0,
- .timeout = 0,
- };
- static struct i2c_board_info __initdata simone_i2c_board_info[] = {
- {
- I2C_BOARD_INFO("ds1337", 0x68),
- },
- };
- static void __init simone_init_machine(void)
- {
- ep93xx_init_devices();
- ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
- ep93xx_register_eth(&simone_eth_data, 1);
- ep93xx_register_fb(&simone_fb_info);
- ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
- ARRAY_SIZE(simone_i2c_board_info));
- ep93xx_register_ac97();
- }
- MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
- /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = simone_init_machine,
- MACHINE_END
|