12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561256225632564256525662567256825692570257125722573257425752576257725782579258025812582258325842585258625872588258925902591259225932594259525962597259825992600260126022603260426052606260726082609261026112612261326142615261626172618261926202621262226232624262526262627262826292630263126322633263426352636263726382639264026412642264326442645264626472648264926502651265226532654265526562657265826592660266126622663266426652666266726682669267026712672267326742675267626772678267926802681268226832684268526862687268826892690269126922693269426952696269726982699270027012702270327042705270627072708270927102711271227132714271527162717271827192720272127222723272427252726272727282729273027312732273327342735273627372738273927402741274227432744274527462747274827492750275127522753275427552756275727582759276027612762276327642765276627672768276927702771277227732774277527762777277827792780278127822783278427852786278727882789279027912792279327942795279627972798279928002801280228032804280528062807280828092810281128122813281428152816281728182819282028212822282328242825282628272828282928302831283228332834283528362837283828392840284128422843284428452846284728482849285028512852285328542855285628572858285928602861286228632864286528662867286828692870287128722873287428752876287728782879288028812882288328842885288628872888288928902891289228932894289528962897289828992900290129022903290429052906290729082909291029112912291329142915291629172918291929202921292229232924292529262927292829292930293129322933293429352936293729382939294029412942294329442945294629472948294929502951295229532954295529562957295829592960296129622963296429652966296729682969297029712972297329742975297629772978297929802981298229832984298529862987298829892990299129922993299429952996299729982999300030013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050305130523053305430553056305730583059306030613062306330643065306630673068306930703071307230733074307530763077307830793080308130823083308430853086308730883089309030913092309330943095309630973098309931003101310231033104310531063107310831093110311131123113311431153116311731183119312031213122312331243125312631273128312931303131313231333134313531363137313831393140314131423143314431453146314731483149315031513152315331543155315631573158315931603161316231633164316531663167316831693170317131723173317431753176317731783179318031813182318331843185318631873188318931903191319231933194319531963197319831993200320132023203320432053206320732083209321032113212321332143215321632173218321932203221322232233224322532263227322832293230323132323233323432353236323732383239324032413242324332443245324632473248324932503251325232533254325532563257325832593260326132623263326432653266326732683269327032713272327332743275327632773278327932803281328232833284328532863287328832893290329132923293329432953296329732983299330033013302330333043305330633073308330933103311331233133314331533163317331833193320332133223323332433253326332733283329333033313332333333343335333633373338333933403341334233433344334533463347334833493350335133523353335433553356335733583359336033613362336333643365336633673368336933703371337233733374337533763377337833793380338133823383338433853386338733883389339033913392339333943395339633973398339934003401340234033404340534063407340834093410341134123413341434153416341734183419342034213422342334243425342634273428342934303431343234333434343534363437343834393440344134423443344434453446344734483449345034513452345334543455345634573458345934603461346234633464346534663467346834693470347134723473347434753476347734783479348034813482348334843485348634873488348934903491349234933494349534963497349834993500350135023503350435053506350735083509351035113512351335143515351635173518351935203521352235233524352535263527352835293530353135323533353435353536353735383539354035413542354335443545354635473548354935503551355235533554355535563557355835593560356135623563356435653566356735683569357035713572357335743575357635773578357935803581358235833584358535863587358835893590359135923593359435953596359735983599360036013602360336043605360636073608360936103611361236133614361536163617361836193620362136223623362436253626362736283629363036313632363336343635363636373638363936403641364236433644364536463647364836493650365136523653365436553656365736583659366036613662366336643665366636673668366936703671367236733674367536763677367836793680368136823683368436853686368736883689369036913692369336943695369636973698369937003701370237033704370537063707370837093710371137123713371437153716371737183719372037213722372337243725372637273728372937303731373237333734373537363737373837393740374137423743374437453746374737483749375037513752375337543755375637573758375937603761376237633764376537663767376837693770377137723773377437753776377737783779378037813782378337843785378637873788378937903791379237933794379537963797379837993800380138023803380438053806380738083809381038113812381338143815381638173818381938203821382238233824382538263827382838293830383138323833383438353836383738383839384038413842384338443845384638473848384938503851385238533854385538563857385838593860386138623863386438653866386738683869387038713872387338743875387638773878387938803881388238833884388538863887388838893890389138923893389438953896389738983899390039013902390339043905390639073908390939103911391239133914391539163917391839193920392139223923392439253926392739283929393039313932393339343935393639373938393939403941394239433944394539463947394839493950395139523953395439553956395739583959396039613962396339643965396639673968396939703971397239733974397539763977397839793980398139823983398439853986398739883989399039913992399339943995399639973998399940004001400240034004400540064007400840094010401140124013401440154016401740184019402040214022402340244025402640274028402940304031403240334034403540364037403840394040404140424043404440454046404740484049405040514052405340544055405640574058405940604061406240634064406540664067406840694070407140724073407440754076407740784079408040814082408340844085408640874088408940904091409240934094409540964097409840994100410141024103410441054106410741084109411041114112411341144115411641174118411941204121412241234124412541264127412841294130413141324133413441354136413741384139414041414142414341444145414641474148414941504151415241534154415541564157415841594160416141624163416441654166416741684169417041714172417341744175417641774178417941804181418241834184418541864187418841894190419141924193419441954196419741984199420042014202420342044205420642074208420942104211421242134214421542164217421842194220422142224223422442254226422742284229423042314232423342344235423642374238423942404241424242434244424542464247424842494250425142524253425442554256425742584259426042614262426342644265426642674268426942704271427242734274427542764277427842794280428142824283428442854286428742884289429042914292429342944295429642974298429943004301430243034304430543064307430843094310431143124313431443154316431743184319432043214322432343244325432643274328432943304331433243334334433543364337433843394340434143424343434443454346434743484349435043514352435343544355435643574358435943604361436243634364436543664367436843694370437143724373437443754376437743784379438043814382438343844385438643874388438943904391439243934394439543964397439843994400440144024403440444054406440744084409441044114412441344144415441644174418441944204421442244234424442544264427442844294430443144324433443444354436443744384439444044414442444344444445444644474448444944504451445244534454445544564457445844594460446144624463446444654466446744684469447044714472447344744475447644774478447944804481448244834484448544864487448844894490449144924493449444954496449744984499450045014502450345044505450645074508450945104511451245134514451545164517451845194520452145224523452445254526452745284529453045314532453345344535453645374538453945404541454245434544454545464547454845494550455145524553455445554556455745584559456045614562456345644565456645674568456945704571457245734574457545764577457845794580458145824583458445854586458745884589459045914592459345944595459645974598459946004601460246034604460546064607460846094610461146124613461446154616461746184619462046214622462346244625462646274628462946304631463246334634463546364637463846394640464146424643464446454646464746484649465046514652465346544655465646574658465946604661466246634664466546664667466846694670467146724673467446754676467746784679468046814682468346844685468646874688468946904691469246934694469546964697469846994700470147024703470447054706470747084709471047114712471347144715471647174718471947204721472247234724472547264727472847294730473147324733473447354736473747384739474047414742474347444745474647474748474947504751475247534754475547564757475847594760476147624763476447654766476747684769477047714772477347744775477647774778477947804781478247834784478547864787478847894790479147924793479447954796479747984799480048014802480348044805480648074808480948104811481248134814481548164817481848194820482148224823482448254826482748284829483048314832483348344835483648374838483948404841484248434844484548464847484848494850485148524853485448554856485748584859486048614862486348644865486648674868486948704871487248734874487548764877487848794880488148824883488448854886488748884889489048914892489348944895489648974898489949004901490249034904490549064907490849094910491149124913491449154916491749184919492049214922492349244925492649274928492949304931493249334934493549364937493849394940494149424943494449454946494749484949495049514952495349544955495649574958495949604961496249634964496549664967496849694970497149724973497449754976497749784979498049814982498349844985498649874988498949904991499249934994499549964997499849995000500150025003500450055006500750085009501050115012501350145015501650175018501950205021502250235024502550265027502850295030503150325033503450355036503750385039504050415042504350445045504650475048504950505051505250535054505550565057505850595060506150625063506450655066506750685069507050715072507350745075507650775078507950805081508250835084508550865087508850895090509150925093509450955096509750985099510051015102510351045105510651075108510951105111511251135114511551165117511851195120512151225123512451255126512751285129513051315132513351345135513651375138513951405141514251435144514551465147514851495150515151525153515451555156515751585159516051615162516351645165516651675168516951705171517251735174517551765177517851795180518151825183518451855186518751885189519051915192519351945195519651975198519952005201520252035204520552065207520852095210521152125213521452155216521752185219522052215222522352245225522652275228522952305231523252335234523552365237523852395240524152425243524452455246524752485249525052515252525352545255525652575258525952605261526252635264526552665267526852695270527152725273527452755276527752785279528052815282528352845285528652875288528952905291529252935294529552965297529852995300530153025303530453055306530753085309531053115312531353145315531653175318531953205321532253235324532553265327532853295330533153325333533453355336533753385339534053415342534353445345534653475348534953505351535253535354535553565357535853595360536153625363536453655366536753685369537053715372537353745375537653775378537953805381538253835384538553865387538853895390539153925393539453955396539753985399540054015402540354045405540654075408540954105411541254135414541554165417541854195420542154225423542454255426542754285429543054315432543354345435543654375438543954405441544254435444544554465447544854495450545154525453545454555456545754585459546054615462546354645465546654675468546954705471547254735474547554765477547854795480548154825483548454855486548754885489549054915492549354945495549654975498549955005501550255035504550555065507550855095510551155125513551455155516551755185519552055215522552355245525552655275528552955305531553255335534553555365537553855395540554155425543554455455546554755485549555055515552555355545555555655575558555955605561556255635564556555665567556855695570557155725573557455755576557755785579558055815582558355845585558655875588558955905591559255935594559555965597559855995600560156025603560456055606560756085609561056115612561356145615561656175618561956205621562256235624562556265627562856295630563156325633563456355636563756385639564056415642564356445645564656475648564956505651565256535654565556565657565856595660566156625663566456655666566756685669567056715672567356745675567656775678567956805681568256835684568556865687568856895690569156925693569456955696569756985699570057015702570357045705570657075708570957105711571257135714571557165717571857195720572157225723572457255726572757285729573057315732573357345735573657375738573957405741574257435744574557465747574857495750575157525753575457555756575757585759576057615762576357645765576657675768576957705771577257735774577557765777577857795780578157825783578457855786578757885789579057915792579357945795579657975798579958005801580258035804580558065807580858095810581158125813581458155816581758185819582058215822582358245825582658275828582958305831583258335834583558365837583858395840584158425843584458455846584758485849585058515852585358545855585658575858585958605861586258635864586558665867586858695870587158725873587458755876587758785879588058815882588358845885588658875888588958905891589258935894589558965897589858995900590159025903590459055906590759085909591059115912591359145915591659175918591959205921592259235924592559265927592859295930593159325933593459355936593759385939594059415942594359445945594659475948594959505951595259535954595559565957595859595960596159625963596459655966596759685969597059715972597359745975597659775978597959805981598259835984598559865987598859895990599159925993599459955996599759985999600060016002600360046005600660076008600960106011601260136014601560166017601860196020602160226023602460256026602760286029603060316032603360346035603660376038603960406041604260436044604560466047604860496050605160526053605460556056605760586059606060616062606360646065606660676068606960706071607260736074607560766077607860796080608160826083608460856086608760886089609060916092609360946095609660976098609961006101610261036104610561066107610861096110611161126113611461156116611761186119612061216122612361246125612661276128612961306131613261336134613561366137613861396140614161426143614461456146614761486149615061516152615361546155615661576158615961606161616261636164616561666167616861696170617161726173617461756176617761786179618061816182618361846185618661876188618961906191619261936194619561966197619861996200620162026203620462056206620762086209621062116212621362146215621662176218621962206221622262236224622562266227622862296230623162326233623462356236623762386239624062416242624362446245624662476248624962506251625262536254625562566257625862596260626162626263626462656266626762686269627062716272627362746275627662776278627962806281628262836284628562866287628862896290629162926293629462956296629762986299630063016302630363046305630663076308630963106311631263136314631563166317631863196320632163226323632463256326632763286329633063316332633363346335633663376338633963406341634263436344634563466347634863496350635163526353635463556356635763586359636063616362636363646365636663676368636963706371637263736374637563766377637863796380638163826383638463856386638763886389639063916392639363946395639663976398639964006401640264036404640564066407640864096410641164126413641464156416641764186419642064216422642364246425642664276428642964306431643264336434643564366437643864396440644164426443644464456446644764486449645064516452645364546455645664576458645964606461646264636464646564666467646864696470647164726473647464756476647764786479648064816482648364846485648664876488648964906491649264936494649564966497649864996500650165026503650465056506650765086509651065116512651365146515651665176518651965206521652265236524652565266527652865296530653165326533653465356536653765386539654065416542654365446545654665476548654965506551655265536554655565566557655865596560656165626563656465656566656765686569657065716572657365746575657665776578657965806581658265836584658565866587658865896590659165926593659465956596659765986599660066016602660366046605660666076608660966106611661266136614661566166617661866196620662166226623662466256626662766286629663066316632663366346635663666376638663966406641664266436644664566466647664866496650665166526653665466556656665766586659666066616662666366646665666666676668666966706671667266736674667566766677667866796680668166826683668466856686668766886689669066916692669366946695669666976698669967006701670267036704670567066707670867096710671167126713671467156716671767186719672067216722672367246725672667276728672967306731673267336734673567366737673867396740674167426743674467456746674767486749675067516752675367546755675667576758675967606761676267636764676567666767676867696770677167726773677467756776677767786779678067816782678367846785678667876788678967906791679267936794679567966797679867996800680168026803680468056806680768086809681068116812681368146815681668176818681968206821682268236824682568266827682868296830683168326833683468356836683768386839684068416842684368446845684668476848684968506851685268536854685568566857685868596860686168626863686468656866686768686869687068716872687368746875687668776878687968806881688268836884688568866887688868896890689168926893689468956896689768986899690069016902690369046905690669076908690969106911691269136914691569166917691869196920692169226923692469256926692769286929693069316932693369346935693669376938693969406941694269436944694569466947694869496950695169526953695469556956695769586959696069616962696369646965696669676968696969706971697269736974697569766977697869796980698169826983698469856986698769886989699069916992699369946995699669976998699970007001700270037004700570067007700870097010701170127013701470157016701770187019702070217022702370247025702670277028702970307031703270337034703570367037703870397040704170427043704470457046704770487049705070517052705370547055705670577058705970607061706270637064706570667067706870697070707170727073707470757076707770787079708070817082708370847085708670877088708970907091709270937094709570967097709870997100710171027103710471057106710771087109711071117112711371147115711671177118711971207121712271237124712571267127712871297130713171327133713471357136713771387139714071417142714371447145714671477148714971507151715271537154715571567157715871597160716171627163716471657166716771687169717071717172717371747175717671777178717971807181718271837184718571867187718871897190719171927193719471957196719771987199720072017202720372047205720672077208720972107211721272137214721572167217721872197220722172227223722472257226722772287229723072317232723372347235723672377238723972407241724272437244724572467247724872497250725172527253725472557256725772587259726072617262726372647265726672677268726972707271727272737274727572767277727872797280728172827283728472857286728772887289729072917292729372947295729672977298729973007301730273037304730573067307730873097310731173127313731473157316731773187319732073217322732373247325732673277328732973307331733273337334733573367337733873397340734173427343734473457346734773487349735073517352735373547355735673577358735973607361736273637364736573667367736873697370737173727373737473757376737773787379738073817382738373847385738673877388738973907391739273937394739573967397739873997400740174027403740474057406740774087409741074117412741374147415741674177418741974207421742274237424742574267427742874297430743174327433743474357436743774387439744074417442744374447445744674477448744974507451745274537454745574567457745874597460746174627463746474657466746774687469747074717472747374747475747674777478747974807481748274837484748574867487748874897490749174927493749474957496749774987499750075017502750375047505750675077508750975107511751275137514751575167517751875197520752175227523752475257526752775287529753075317532753375347535753675377538753975407541754275437544754575467547754875497550755175527553755475557556755775587559756075617562756375647565756675677568756975707571757275737574757575767577757875797580758175827583758475857586758775887589759075917592759375947595759675977598759976007601760276037604760576067607760876097610761176127613761476157616761776187619762076217622762376247625762676277628762976307631763276337634763576367637763876397640764176427643764476457646764776487649765076517652765376547655765676577658765976607661766276637664766576667667766876697670767176727673767476757676767776787679768076817682768376847685768676877688768976907691769276937694769576967697769876997700770177027703770477057706770777087709771077117712771377147715771677177718771977207721772277237724772577267727772877297730773177327733773477357736773777387739774077417742774377447745774677477748774977507751775277537754775577567757775877597760776177627763776477657766776777687769777077717772777377747775777677777778777977807781778277837784778577867787778877897790779177927793779477957796779777987799780078017802780378047805780678077808780978107811781278137814781578167817781878197820782178227823782478257826782778287829783078317832783378347835783678377838783978407841784278437844784578467847784878497850785178527853785478557856785778587859786078617862786378647865786678677868786978707871787278737874787578767877787878797880788178827883788478857886788778887889789078917892789378947895789678977898789979007901790279037904790579067907790879097910791179127913791479157916791779187919792079217922792379247925792679277928792979307931793279337934793579367937793879397940794179427943794479457946794779487949795079517952795379547955795679577958795979607961796279637964796579667967796879697970797179727973797479757976797779787979798079817982798379847985798679877988798979907991799279937994799579967997799879998000800180028003800480058006800780088009801080118012801380148015801680178018801980208021802280238024802580268027802880298030803180328033803480358036803780388039804080418042804380448045804680478048804980508051805280538054805580568057805880598060806180628063806480658066806780688069807080718072807380748075807680778078807980808081808280838084808580868087808880898090809180928093809480958096809780988099810081018102810381048105810681078108810981108111811281138114811581168117811881198120812181228123812481258126812781288129813081318132813381348135813681378138813981408141814281438144814581468147814881498150815181528153815481558156815781588159816081618162816381648165816681678168816981708171817281738174817581768177817881798180818181828183818481858186818781888189819081918192819381948195819681978198819982008201820282038204820582068207820882098210821182128213821482158216821782188219822082218222822382248225822682278228822982308231823282338234823582368237823882398240824182428243824482458246824782488249825082518252825382548255825682578258825982608261826282638264826582668267826882698270827182728273827482758276827782788279828082818282828382848285828682878288828982908291829282938294829582968297829882998300830183028303830483058306830783088309831083118312831383148315831683178318831983208321832283238324832583268327832883298330833183328333833483358336833783388339834083418342834383448345834683478348834983508351835283538354835583568357835883598360836183628363836483658366836783688369837083718372837383748375837683778378837983808381838283838384838583868387838883898390839183928393839483958396839783988399840084018402840384048405840684078408840984108411841284138414841584168417841884198420842184228423842484258426842784288429843084318432843384348435843684378438843984408441844284438444844584468447844884498450845184528453845484558456845784588459846084618462846384648465846684678468846984708471847284738474847584768477847884798480848184828483848484858486848784888489849084918492849384948495849684978498849985008501850285038504850585068507850885098510851185128513851485158516851785188519852085218522852385248525852685278528852985308531853285338534853585368537853885398540854185428543854485458546854785488549855085518552855385548555855685578558855985608561856285638564856585668567856885698570857185728573857485758576857785788579858085818582858385848585858685878588858985908591859285938594859585968597859885998600860186028603860486058606860786088609861086118612861386148615861686178618861986208621862286238624862586268627862886298630863186328633863486358636863786388639864086418642864386448645864686478648864986508651865286538654865586568657865886598660866186628663866486658666866786688669867086718672867386748675867686778678867986808681868286838684868586868687868886898690869186928693869486958696869786988699870087018702870387048705870687078708870987108711871287138714871587168717871887198720872187228723872487258726872787288729873087318732873387348735873687378738873987408741874287438744 |
- # makefile / Makefile / ckuker.mak / CKUKER.MAK
- #
- # Sat Sep 19 11:01:20 2020
- BUILDID=20200918
- CKVER= "9.0.305" # Alpha.02
- #
- # -- Makefile to build C-Kermit for UNIX and UNIX-like platforms --
- #
- # Copyright (C) 1985, 2020,
- # Trustees of Columbia University in the City of New York.
- # All rights reserved. See the C-Kermit COPYING.TXT file or the
- # copyright text in the ckcmai.c module for disclaimer and permissions.
- # In case you can't find the COPYING.TXT file, it contains the
- # Simplified 3-Clause BSD License, which is an Open Source license.
- #
- # Author: Frank da Cruz (principal author)
- # Email: fdc@kermitproject.org
- # Web: http://www.kermitproject.org
- # FTP: ftp://ftp.kermitproject.org
- #
- # Note: Author is no longer at Columbia University or at the 115th Street
- # address effective 1 July 2011. Even so, C-Kermit remains Copyright
- # Columbia U because that is where it was first written in 1985 and further
- # developed through mid-2011.
- #
- # Contributions from many others. Special thanks to Jeff Altman for the
- # secure-build targets, Peter Eichhorn, assyst GmbH, for the consolidated
- # HP-UX targets and the "uninstall" target, to Robert Lipe for the updated
- # and consolidated SCO UNIX / ODT / OSR5 targets, to Ric Anderson for the
- # IRIX 6.x targets, to Seth Theriault for major improvements to the
- # Mac OS X targets, and to Alexey Dokuchaev for FreeBSD 9.0.
- #
- # C-Kermit is written and produced by hand without any external automated
- # procedures such as autoconf / automake / configure, although some of the
- # targets below (especially the linux target) inspect the environment and make
- # some decisions in the most portable way possible. The automated tools are
- # not used because (a) C-Kermit predates them, and (b) they are not portable
- # to all the platforms where C-Kermit must be (or once was) built, and (c) to
- # keep C-Kermit as independent as possible from external tools over which we
- # have no control.
- #
- # Most entries use the "xermit" target, which uses the select()-based CONNECT
- # module, ckucns.c. The "wermit" target uses the original fork()-based CONNECT
- # module, ckucon.c, which has some drawbacks but was portable to every Unix
- # variant whether it had TCP/IP or not (select() is part of the TCP/IP
- # library, which was not standard on older Unixes). If your target still uses
- # the "wermit" target, please try substituting the "xermit" one and if it
- # works, let us know (mailto:kermit-support@columbia.edu). When changing a
- # target over from wermit to xermit, also remove -DNOLOEARN.
- #
- # CAREFUL: Don't put the lowercase word "if", "define", or "end" as the first
- # word after the "#" comment introducer in the makefile, even if it is
- # separated by whitespace. Some versions of "make" understand these as
- # directives. Uppercase letters remove the danger, e.g. "# If you have..."
- #
- # WARNING: This is a huge makefile. Although this is less likely since the
- # turn of the century, some "make" programs might run out of memory. If this
- # happens to you, edit away the parts that do not apply to your platform and
- # try again.
- #
- # WARNING 2: In many cases this file invokes itself recursively, sometimes
- # several levels deep (as in the Linux targets); i.e. some targets are used
- # as 'subroutines' of other targets, with parameters passed by setting
- # environment variables. For that reason, don't use 'make -e'.
- #
- # Certain UNIX variations have their own separate makefiles:
- # . For Android, use android.mk.
- # . For 2.10 or 2.11 BSD on the DEC PDP-11, use ckubs2.mak.
- # . For Plan 9, use ckpker.mk.
- #
- # Separate build procedures are provided non-UNIX platforms: VMS, VOS,
- # AOS/VS, etc. See the ckaaaa.txt file or the Kermit website for details.
- #
- #
- # DIRECTIONS FOR UNIX
- #
- # Rename this file to "makefile" or "Makefile" if necessary. Pick out the
- # entry most appropriate for your UNIX version from the list below and then
- # give the appropriate "make" command, for example "make aix", "make macosx",
- # "make linux". If you experience any difficulties with the build procedure,
- # then please also read any comments that accompany the make entry itself
- # (search for the make entry name on the left margin).
- #
- # Other targets:
- # 'make install' is an installation script (read accompanying comments!).
- # 'make uninstall' undoes 'make install' (read accompanying comments!).
- # 'make clean' removes intermediate and object files.
- # 'make show' tells the default include and lib paths for secure builds.
- #
- # IMPORTANT:
- # For more detailed installation instructions, read the files ckuins.txt
- # and ckccfg.txt, also available at the Kermit website in HTML form:
- # http://www.columbia.edu/kermit/ckuins.html
- # http://www.columbia.edu/kermit/ckccfg.html
- #
- # For descriptions of known problems and limitations,
- # read the files ckcbwr.txt and ckubwr.txt (the "beware files") or:
- # http://www.columbia.edu/kermit/ckcbwr.html
- # http://www.columbia.edu/kermit/ckubwr.html
- #
- # Most targets build C-Kermit with its symbol table included. To reduce the
- # size of the executable program, add "LNKFLAGS=-s" to the end of your 'make'
- # command or to the makefile entry, or 'strip' the executable after
- # building. To further reduce the size after building, use 'mcs -d' if your
- # Unix version has such a command. For further details on size reduction, read
- # ckccfg.txt to find out how to remove features that you don't need.
- #
- # TCP/IP networking support: If your C-Kermit version does not include TCP/IP
- # networking, but your UNIX system does, try adding -DTCPSOCKET to the CFLAGS
- # of your makefile entry. If that doesn't work, look at some of the other
- # targets that include this flag for ideas about what libraries might need to
- # be included (typically -lsocket and/or -lBSD and/or -lnsl and/or -linet).
- # NOTE: In some cases (old versions of SCO or HP-UX), you might need not only
- # a C compiler, but also a "TCP/IP developers kit" for the required object
- # libraries and header files.
- #
- # Please report modifications, failures (preferably with fixes) or successes
- # to the author, fdc@columbia.edu.
- #
- # TARGETS FOR DIFFERENT UNIX PLATFORMS AND VERSIONS:
- #
- # + Marks those that have been built successfully for C-Kermit 9.0 or later.
- # - Those that once built OK but no longer do (e.g. too big).
- # ? Those that worked in a previous version but have not been tested recently.
- # --------------------------
- # Some commonly used targets:
- #
- # + "make -f android.mk" (separate makefile) for Android.
- # + "make linux" should work for any version of Linux on any hardware.
- # Note: new "make linux" (2016) not yet widely tested.
- # Use "make linux-2015" (the old "make linux")
- # if "make linux" causes problems.
- # + "make linux+ssl" ditto, with OpenSSL security added.
- # + "make linux+krb5" ditto, with Kerberos 5 security added.
- # + "make linux+krb5+ssl" Linux with OpenSSL and Kerberos 5.
- # Note: the Linux targets work for Raspberry Pi with Debian 7.0 (Raspbian)
- # + "make netbsd", NetBSD, any version.
- # + "make netbsd+ssl", NetBSD with OpenSSL 0.9.7 or later.
- # + "make netbsd+krb5", NetBSD with Kerberos 5.
- # + "make netbsd+krb5+ssl", NetBSD with Kerberos 5 and OpenSSL 0.9.7 or later.
- # ? "make freebsd1" for FreeBSD 1.x
- # ? "make freebsd2" for FreeBSD 2.x
- # + "make freebsd3" for FreeBSD 3.x
- # ? "make freebsd4" for FreeBSD 4.0
- # + "make freebsd", FreeBSD 4.1 or later.
- # + "make freebsd+ssl", FreeBSD 5.0 or later with OpenSSL 0.9.7 or later.
- # + "make openbsd", OpenBSD 2.3 or later.
- # + "make openbsd+ssl", OpenBSD 2.3 or later with OpenSSL 0.9.7 or later.
- # + "make mirbsd", MirBSD.
- # + "make mirbsd+ssl", MirBSD with OpenSSL 0.9.7 or later.
- # + "make macosx" should work for any Mac OS X version 10.3.9 or later.
- # + "make macosx+krb5+openssl" Mac OS X 10.3.9 or later + Kerberos V + OpenSSL.
- # + "make aix" should work for any version of AIX 4.2 or later.
- # + "make aixg" should work for any version of AIX 4.2 or later, using gcc.
- # + "make aix+ssl" ditto, with OpenSSL (specifying SSLLIB and SSLINC)
- # + "make aix+ibmssl" ditto, with IBM OpenSSL
- # + "make solaris9", "make solaris10" for Solaris 9 or 10 with Sun cc.
- # + "make solaris9g", "make solaris10g" for Solaris 9 or 10 with gcc.
- # + "make solaris11" for Solaris 11 with Sun CC
- # + "make solaris11g" for Solaris 11 with gcc
- # + "make sco_osr600" for SCO OpenServer 6.0.0.
- #
- # For other current OSs such as Solaris, HP-UX, and SCO there are separate
- # targets for different combinations of OS version and compiler; see the
- # complete list. For older OS's see the complete list. If an old target
- # doesn't work in this release of C-Kermit you can get a previous release from
- # the Kermit FTP site: ftp://kermit.columbia.edu/kermit/
- #
- # SECURE TARGETS (versions that support authentication and encryption)
- # are described after the following list. Search for ******* below.
- #
- # --------------------------
- # Complete list (alphabetical):
- # ? for 386BSD (Jolix) 0.0, 0.1, "make 386bsd" (see comments in entry),
- # or (preferably, if it works) "make bsd44" or "make bsd44c".
- # ? for Acorn RISCiX, "make riscix" or "make riscix-gcc"
- # ? for Alliant FX/8 with Concentrix 4.1 or later, "make bsdlck"
- # ? for Altos 486, 586, 986 with Xenix 3.0, "make altos"
- # ? for Altos ACS68000, 8Mhz 68000, UNIX System 3 Rel 2, 512K, "make altos3"
- # ? for Amdahl UTS 2.4 on IBM 370 series & compatible mainframes, "make uts24"
- # ? for Amdahl UTSV IBM 370 series & compatible mainframes, "make utsv"
- # ? for Amdahl UTSV IBM 370 series mainframes with TCP/IP, "make utsvtcp"
- # ? for Amdahl mainframes with UNIX System V R 5.2.6b 580, "make sys3"
- # ? for Apollo Aegis 9.x, DOMAIN/IX 9.x, "make aegis"
- # (Last tested in C-Kermit 5A(189))
- # ? for Apollo DOMAIN/IX, if the above fails, try "make apollobsd"
- # ? for Apollo with SR10.0 or later, BSD environment, "make sr10-bsd"
- # ? for Apollo with SR10.0 or later, System V environment, "make sr10-s5r3"
- # ? for Apple Macintosh II with A/UX pre-3.0, "make aux", "auxgcc" or "auxufs"
- # ? for Apple Macintosh with A/UX 3.0 and gcc, "make aux3gcc" or aux3gccc
- # ? for Apple PowerMac with MkLinux, "make mklinux" (read Linux entry first)
- # ? for Apple PowerMac with LinuxPPC, "make linuxppc"
- # ? for Apple Macintosh with Minix 1.5.10, "make minix68k" or "make minixc68"
- # ? for Apple Macintosh with Mac OS X 1.0 (Rhapsody), "make macosx10"
- # (no curses), "make macosx10c" (curses), or "make macosx10nc" (ncurses).
- # Or "make macosx10ncx" (ncurses but "make macosx10nc" doesn't work).
- # ? for Apple Macintosh with Mac OS X 10.2, "make macosx102nc" (ncurses).
- # ? for Apple Macintosh with Mac OS X 10.3, "make macosx103"
- # ? for Apple Macintosh with Mac OS X 10.3.9 or later, "make macosx"
- # ? for Arix System 90 with AT&T SVR3, "make sys5r3na"
- # - for AT&T 6300 with IN/ix, "make sys5"
- # - for AT&T 6300 PLUS, "make att6300" or (with no debugging) "make att6300nd"
- # ? for AT&T 6386 WGS UNIX PC, "make sys5r3"
- # ? for AT&T 3B2, 3B20 systems, "make att3b2".
- # for AT&T 3B1, 7300 UNIX PC (see notes with the entries):
- # In C-Kermit 7.0, only the gcc entries work:
- # ? "make sys3upcg", "make sys3upcgc", "make att351gm"
- # The others fail with "too many defines" (usually in ckuusr.h):
- # - "make sys3upc", "make sys3upcold", "make sys3upcc", "make sys3upcx",
- # "make sys3upcm", "make att351m"
- # ? for AT&T System III/System V R2 or earlier, "make sys3" or "make sys3nid"
- # ? for AT&T System III/System V with Honey DanBer UUCP, "make sys3hdb"
- # ? for AT&T System V on DEC VAX, "make sys3" or "make sys5r3"
- # ? for AT&T System V R3, use "make sys5r3" or "make sys5r3c"
- # ? for AT&T System V/386 R3.2 built on Interactive 4.1.1, "make sys5r32is".
- # ? for AT&T System V/386 R320.0 Versyss Systems, use "make sys5r3"
- # or "make sys5r3c".
- # ? for AT&T System V R4, "make sys5r4", "make sys5r4sx", or "make sys5r4nx",
- # or if the ANSI C function prototyping makes trouble, add -DNOANSI,
- # as in "sys5r4sxna" entry
- # ? for AT&T (USL) System V R4.2 use the sys5r4* entries.
- # ? for Atari Falcon with MiNT, "make posix"
- # ? for Atari ST with Minix ST 1.5.10.3, "make minix68k" or "make minixc68"
- # ? for BBN C/70 with IOS 2.0, "make c70"
- # ? for BeBox with Be OS 1.x DR7, "make beboxdr7"
- # Compiles OK but doesn't link with default linker which is limited to 64K.
- # Links OK with "Code Warrior Gold". Many hacks in the source code need
- # to be removed when DR8 and later come out.
- # (Last tested in C-Kermit 6.0)
- # - for BeBox with Be OS 1.x DR8, "make bebox"
- # (Needed functions missing from operating system and/or not working.)
- # - for Bell Labs UNIX Version 6 (6th Edition), there is no makefile entry.
- # ? for Bell Labs UNIX Version 7 (7th Edition), "make v7" (but see notes below)
- # (last built successfully in C-Kermit 5A188)
- # ? for Bell Labs Research UNIX Version 10, "make bellv10"
- # (last built successfully in C-Kermit 6.0)
- # ? for Bell Labs / Lucent Plan 9, use separate makefile ckpker.mk:
- # can be built for Intel, MIPS, 680x0, and PowerPC (last built C-Kermit 7.0)
- # ? for BSDI BSD/386 1.x, "make bsdi"
- # ? for BSDI BSD/OS 2.x, "make bsdi2"
- # ? for BSDI BSD/OS 3.0 or 3.1, "make bsdi3"
- # ? for BSDI BSD/OS 4.x, "make bsdi4"
- # ? for BSDI BSD/OS 4.x, to build a binary that also works on FreeBSD,
- # "make bsdix".
- # ? for Berkeley Unix 2.4, "make v7" (but read v7 material below)
- # ? for Berkeley Unix 2.9 (DEC PDP-11 or Pro-3xx), "make bsd29"
- # - for Berkeley Unix 2.10, use ckubs2.mak (a separate makefile)
- # - for Berkeley Unix 2.11, use ckubs2.mak (a separate makefile)
- # This makefile is too big. Read the instructions in ckubs2.mak.
- # "make -f ckubs2.mak bsd210" or "make -f ckubs2.mak bsd211".
- # (last built successfully in C-Kermit 6.0 - later versions too big)
- # ? for Berkeley Unix 2.11 "make -f ckubs2.mak bsd210noicp" (no command parser)
- # ? for Berkeley Unix 4.1, "make bsd41"
- # ? for Berkeley Unix 4.2 on VAX, "make bsd42" or "make bsd42c"
- # ? for Berkeley Unix 4.2 or 4.3 with HoneyDanBer UUCP, "make bsdhdb"
- # ? for Berkeley Unix 4.3 on VAX, "make bsd43", "make bsd43nc".
- # ? for Berkeley Unix 4.3 on VAX, no networking "make bsd43nonet.
- # ? for Berkeley Unix 4.3 without acucntrl program, "make bsd42" or "bsd42c"
- # NOTE: all the C-Kermit 7.0 full builds for old BSDs fail with
- # "too many defines" in CPP, even on big architectures like VAX. This
- # can be worked around with a clever ruse. See comments at target.
- # ? for Berkeley Unix 4.3, command-line only, "make bsdm".
- # ? for Berkeley Unix 4.3-Tahoe, same as 4.3 BSD
- # ? for Berkeley Unix 4.3-Reno, "make bsd43" or "make bsd44" or "make bsd44c"
- # ? for Berkeley Unix 4.3-Carson City, "make bsd44" or "make bsd44c"
- # ? for Berkeley Unix 4.4-Networking/2 or -Alpha, "make bsd44" or "make bsd44c"
- # ? for Berkeley Unix 4.4, "make bsd44" or "make bsd44c"
- # ? for Berkeley Unix 4.4-Lite, "make bsd44" or "make bsd44c"
- # ? for Bull DPX/2 with BOS/X, "make bulldpx2"
- # ? for Cadmus, "make sys3"
- # for Caldera, see SCO, Linux.
- # ? for Callan Unistar, "make sys3"
- # ? for CDC VX/VE 5.2.1 System V emulation, "make vxve"
- # ? for Charles River Data Systems Universe 680x0 with UNOS 9.2, maybe
- # also other UNOS versions, "make crds"
- # ? for CIE Systems 680/20 with Regulus, "make cie"
- # ? for Commodore Amiga 3000UX Sys V R4, "make sys5r4sx"
- # ? for Commodore Amiga 3000UX Sys V R4 and TCP/IP, "make svr4amiganet"
- # ? for Commodore Amiga with Minix 1.5.10, "make minix68k" of "make minixc68"
- # ? for Concurrent/Masscomp with RTU 4.0 or later, BSD environment, "make
- # rtubsd", "make rtubsd2", "make rtubsd3" (depending on where ndir.h
- # is stored, see entries below).
- # ? for Concurrent/Masscomp with RTU 4.0 or later, System V R2, "make rtus5"
- # ? for Concurrent (Perkin-Elmer) 3200 series, "make sys5".
- # ? for Concurrent (Perkin-Elmer) 3200 series with <dirent.h>, "make ccop1"
- # ? for Concurrent PowerMAX OS SVR4, "make powermax"
- # ? for Consensys UNIX SV/386 R4V3, "make sys5r4sxtcpc" or "make sys5r4sx"
- # ? for Convergent with CTIX Sys V R2, "make sys5"
- # ? for Convergent with CTIX 6.4.1, "make ctix"
- # ? for Convex C1, "make convex"
- # ? for Convex C210 with Convex/OS 8, "make convex8"
- # ? for Convex C2 with Convex/OS 9.1, "make convex9"
- # ? for Convex C2 with Convex/OS 10.1 and gcc 2.x, "make convex10gcc"
- # ? for Cray Research X/MP or YMP or C90 with UNICOS 6.x (System V R3),
- # "make cray"
- # ? for Cray Research X/MP or YMP or C90 with UNICOS 7.x (System V R4),
- # "make cray"
- # ? for Cray Research X/MP or YMP or C90 with UNICOS 8.0 Alpha, "make cray8"
- # ? for Cray Research X/MP or Y-MP or C90 with UNICOS 9.0, "make cray9"
- # ? for Cray Computer Cray-2 or Cray3 with CSOS, "make craycsos"
- # ? for Cyber 910 (Silicon-Graphics Iris) with Irix 3.3, "irix33"
- # ? for Data General AViiON with DG/UX 5.4 before R3.00, "make dgux540"
- # or "make dgux540c" (compile ckwart separately if necessary)
- # ? for DG/UX 5.4 on AViiON Intel models, "make dgux540i" or dgux540ic.
- # ? for DG/UX 5.4R4.11 on AViiON, all models, "make dgux54411"
- # ? for DG/UX 5.4R4.20 on AViiON, all models, "make dgux54420"
- # ? for Data General AViiON with DG/UX 4.3x using Sys V-isms, "make dgux430"
- # ? for Data General AViiON with DG/UX 4.3x using BSD-isms, "make dgux430bsd"
- # ? for Data General AViiON, earlier UNIX versions,
- # "make sys5r3" (maybe compile ckwart separately, or "touch ckcpro.c")
- # ? for Data General MV systems with DG/UX, ???
- # ? for Data General MV systems with MV/UX, use AOS/VS C-Kermit (CKDKER.MAK)
- # ? for Data General MV systems with AOS/VS, use CKDKER.MAK (last = C-K 7.0)
- # ? for DEC PDP-11 with Berkeley UNIX 2.x, see Berkeley UNIX 2.x.
- # ? for DEC PDP-11 with Mini-UNIX (Bell 6th Edition for PDP-11 with no MMU),
- # probably no way to fit C-Kermit without I&D space.
- # ? for DEC PDP-11 with Ultrix-11 3.x, ??? (probably needs overlays)
- # ? for DEC VAX with Ultrix 1.x "make bsd"
- # ? for DEC VAX with Ultrix 2.x "make ultrix2x"
- # ? for DEC VAX or DECstation with Ultrix 3.0, 3.1, "make ultrix3x"
- # ? for DECstation or VAX with Ultrix 4.0 or 4.1, "make ultrix40"
- # ? for DECstation or VAX with Ultrix 4.2, "make ultrix42" or "make ultrix42c"
- # ? for DECstation or VAX with Ultrix 4.x, POSIX world, "make posix"
- # ? for DECstation or VAX with Ultrix 4.3, "make ultrix43".
- # ? for DECstation or VAX with Ultrix 4.4, "make ultrix44".
- # ? for DECstation 5000/50, /150 or /260 (R4x00 MIPS CPU), Ultrix 4.3A or later
- # "make ultrix43-mips3" or "make ultrix43c-mips3"
- # ? for DECstation (MIPS) with Berkeley Sprite, "make bsd44"?
- # ? for DECstation (MIPS) with OSF/1 V1.0 to 1.3, "make dec-osf"
- # ? for DEC Alpha with OSF/1 1.0 to 1.3, "make dec-osf"
- # ? for DEC PC 486 with OSF/1, "make dec-osf"
- # ? for DEC Alpha with OSF/1 2.x, "make dec-osf20"
- # ? for DEC Alpha with OSF/1 3.0, "make dec-osf30"
- # ? for DEC Alpha with Digital UNIX 3.2, "make du32"
- # ? for DEC Alpha with Digital UNIX 4.0-4.0D, "make du40" or "make du40gcc"
- # ? for DEC Alpha with Digital UNIX 4.0E or higher, see Tru64.
- # + for DEC Alpha with any version of DU or OSF/1, "make dec-osf1"
- # - for DEC Pro-350 with Pro/Venix V1.x, "make provx1" (version 5A is too big)
- # ? for DEC Pro-380 with Pro/Venix V2.0 (Sys V), "make sys3" or "make sys3nid"
- # ? for DEC Pro-380 with 2.9, 2.10, or 2.11 BSD, "make bsd29" or "make bsd210"
- # for DEC PDP-11 with 2.xBSD (use separate makefile ckubs2.mak)
- # ? for Dell UNIX Issue 2.x (= USL Sys V/386 R4.x + fixes), "make dellsys5r4"
- # or "make dellsys5r4c" (last tested in C-Kermit 5A).
- # ? for DIAB DS90 with DNIX (any version) create an empty <sys/file.h> if
- # this file does not already exist (or add -DNOFILEH to the make entry).
- # ? for DIAB DS90 with DNIX 5.2 (Sys V.2) or earlier, "make dnix",
- # "make dnixnd", or (to add curses and TCP/IP) "make dnixnetc",
- # ? for DIAB DS90 with DNIX 5.3 (Sys V.3), "make dnix5r3"
- # ? for DIAB DS90 with DNIX 5.3 (Sys V.3) and TCP/IP, "make dnix5r3net"
- # ? for DIAB DS90 with DNIX 5.3 2.2 (Sys V.3), ANSI C, "make dnix5r3ansi"
- # or, to include TCP/IP, "make dnix5r3ansinet",
- # but you have to fix a bug in /usr/include/stdlib.h first:
- # change "extern void free(char *str);" to "extern void free(void *str);"
- # ? for Dolphin Server Technology Triton 88/17 with SV/88 R3.2, "make sv88r32"
- # ? for Encore Multimax 310, 510 with Umax 4.2, "make umax42"
- # ? for Encore Multimax 310, 510 with Umax 4.3, "make umax43"
- # ? for Encore Multimax 310, 510 with Umax V 2.2, use Berkeley cc, "make bsd"
- # ? for Encore 88K with Umax V 5.2, "make encore88k"
- # ? for ESIX System V R4.0.3 or 4.04 with TCP/IP support, "make esixr4"
- # NOTE: You can also build on Unixware 2.x with "make esixr4", and run
- # on ESIX, but there you must first:
- # ln /usr/lib/libsocket.so /usr/lib/libsocket.so.1
- # ln /usr/lib/libnsl.so /usr/lib/libnsl.so.1
- # (This worked for C-Kermit 6.0 but does not work for 7.0)
- # (But you can probably still build a non-networking version this way)
- # ? for Everex STEP 386/25 Rev G with ESIX Sys V R3.2D, "make sys5r3"
- # ? for Fortune 32:16, For:Pro 1.8, "make ft18"
- # ? for Fortune 32:16, For:Pro 2.1, "make ft21"
- # ? for FPS 500 with FPX 4.1, "made bsd"
- # ? for FreeBSD 1.0, "make freebsd1"
- # ? for FreeBSD 2.x, "make freebsd2" (ncurses) or "make freebsd2c" (curses)
- # ? for FreeBSD 3.x, "make freebsd3" (ncurses) or "make freebsd3c" (curses)
- # ? for FreeBSD 4.0, "make freebsd40"
- # ? for FreeBSD 4.1 or later, "make freebsd"
- # + NOTE: Just use "make freebsd" for any reasonably recent FreeBSD version.
- # ? for Harris HCX-2900, "make sys5r3"
- # ? for Harris Night Hawk 88K or 68K with CX/UX pre-6.1, "make sys5r3"
- # ? for Harris Night Hawk 88K or 68K with CX/UX 6.1 or later, "make cx_ux"
- # ? for Heurikon, "make sys3"
- # ? for HP-3000, MPE/ix, "make posix"?
- # ? for HP-9000 Series 300 with 4.4BSD, "make bsd44"
- # NOTE: Most of the HP-UX targets were tested successfully in 2010.
- # Verification needed for C-Kermit 9.0 Beta.01...
- # ? for HP-9000 Series 500, HP-UX 5.21 and no networking "make hpux0500"
- # ? for HP-9000 Series 500, HP-UX 5.21 with WIN/TCP 1.2 "make hpux0500wintcp"
- # ? for HP-9000 Series, HP-UX 6.5, without long filenames,
- # "make hpux0650", "make hpux0650c" or "make hpux0650tcpc"
- # ? for HP-9000 Series, HP-UX 7.0 or later no long filenames, "make hpux0700sf"
- # or (to include tcp/ip, curses, etc) "make hpux0700sftcpc"
- # ? for HP-9000 Series with HP-UX 7.0, TCP/IP,long filenames,"make hpux0700lfn"
- # ? for HP-9000 300/400 Series (680x0) with HP-UX 8.0, TCP/IP, "make hpux0800"
- # or "make hpux0800c"
- # ? for HP-9000 700/800 Series (PA-RISC), HP-UX 8.0, TCP/IP, "make hpux0800pa"
- # or "make hpux0800pac"
- # ? for HP-9000 Series with HP-UX 8.0, no TCP/IP, long filenames,
- # "make hpux0800notcp"
- # ? for HP-9000 Series, HP-UX 9.0 - 9.10, TCP/IP, curses, restricted compiler
- # (no optimization, no ANSI), all models, "make hpux0900". Read the
- # hpux0900 entry below for more info.
- # ? for HP-9000 700 and 800 Series, HP-UX 9.x, TCP/IP, curses,
- # HP optimizing ANSI C compiler, "make hpux0900o700".
- # ? for HP-9000 with Motorola CPUs, HP-UX 9.x, TCP/IP, curses,
- # HP optimizing ANSI C compiler, "make hpux0900mot".
- # ? for HP-9000 on other CPUs, HP-UX 9.x, TCP/IP, curses,
- # HP optimizing ANSI C compiler, "make hpux0900o".
- # ? for HP-9000 series, HP-UX 9.x, TCP/IP, curses, gcc, all models,
- # "make hpux0900gcc"
- # ? for HP-9000 700/800 Series, HP-UX 10.00,10.01,10.10,10.20,10.30, TCP/IP,
- # curses, restricted compiler (no optimization, no ANSI) "make hpux1000".
- # ? for HP-9000 700/800 Series, HP-UX 10.00,10.01,10.10,10.20,10.30, TCP/IP,
- # curses, HP ANSI/optimizing compiler "make hpux1000o" or "make hpux1000o+"
- # ? for HP-9000 HP-UX 10.00 or later with gcc, "make hpux1000gcc"
- # ? for Trusted HP-UX 10.xx "make hpux1000t", "make hpux1000to",
- # or make hpux1000to+"
- # ? for HP-9000 700/800 Series, HP-UX 11.00,TCP/IP,curses, restricted compiler
- # (no optimization, no ANSI) "make hpux1100".
- # ? for HP-9000 700/800 Series, HP-UX 11.00,TCP/IP,curses, restricted compiler
- # HP ANSI/optimizing compiler "make hpux1100o" or "make hpux1100o+"
- # ? for Trusted HP-UX 11.xx "make hpux1100t", "make hpux1100to",
- # make hpux1100to+"
- # ? for HP-9000 PA-RISC models with NeXTSTEP 3.3, "make nextquadfat".
- # ? for HP-9000 PA-RISC models with OPENSTEP/Mach 4.1, "make nextquadfat".
- # ? for IBM 370 Series with IX/370, "make ix370"
- # ? for IBM 370 Series with AIX/370 1.2, "make aix370"
- # ? for IBM 370 Series with AIX/370 3.0, "make aix370"
- # ? for IBM 370 Series with AIX/ESA 2.1, "make aixesa"
- # - for IBM PC/AT 286 & compatibles with Mark Williams Coherent OS,
- # command-line-only version, "make coherent" (version 5A & later too big)
- # ? for IBM PC 386 & compatibles with Mark Williams Coherent OS,
- # minimum interactive version, "make coherentmi"
- # ? for IBM PC 386 & compatibles with Mark Williams Coherent OS,
- # full interactive version, prior to v4.2, "make coherentmax"
- # ? for IBM PC 386 & compatibles with Mark Williams Coherent OS 4.2,
- # "make coherent42"
- # ? for IBM PC 386 & compatibles with LynxOS 2.0 or 2.1, "make lynx21"
- # ? for IBM PC 386 & compatibles with LynxOS 2.2, "make lynx"
- # - for IBM PC/AT & compatibles with original MINIX, "make minix" (too big)
- # ? for IBM PC family, 386-based, with MINIX/386 1.5, "make minix386"
- # or if you have GNU CC, "make minix386gcc"
- # ? for IBM PC family, 386-based, with MINIX 2.0, "make minix20"
- # ? for IBM PC family, 386-based, with MINIX 3.0, "make minix3"
- # + for IBM PC family, 386-based, with MINIX 3.0, "make minix315"
- # ? for IBM PS/2 with PS/2 AIX 1.0, 1.1, or 1.2, "make ps2aix" or ps2aixnetc.
- # ? for IBM PS/2 with PS/2 AIX 1.3, "make ps2aix3"
- # ? for IBM RISC System/6000 with AIX 3.0, "make aix30"
- # ? for IBM RISC System/6000 with AIX 3.1.x, "make aix31"
- # ? for IBM RISC System/6000 with AIX 3.2.0 thru 3.2.5, "make aix32"
- # ? for IBM RS/6000 or Power Series with AIX 4.1.x, "make aix41"
- # ? for IBM RS/6000 or Power Series with AIX 4.1.x with gcc, "make aix41g"
- # ? for IBM RS/6000 or Power Series with AIX 4.1 with X.25, "make aix41x25"
- # ? for IBM RS/6000 or Power Series with AIX 4.2 or later: "make aix"
- # (the following "make aixnn" targets are no longer necessary except for gcc)
- # ? for IBM RS/6000 or Power Series with AIX 4.2, "make aix42"
- # ? for IBM RS/6000 or Power Series with AIX 4.3, "make aix43" (or aix43gcc)
- # ? for IBM RS/6000 or Power Series with AIX 4.4, "make aix44" (or aix44gcc)
- # ? for IBM RS/6000 or Power Series with AIX 4.5, "make aix45" (or aix45gcc)
- # ? for IBM RS/6000 or Power Series with AIX 5.0, "make aix50" (or aix50gcc)
- # ? for IBM RS/6000 or Power Series with AIX 5.1, "make aix51" (or aix51gcc)
- # ? for IBM RS/6000 or Power Series with AIX 5.2, "make aix52" (or aix52gcc)
- # ? for IBM RS/6000 or Power Series with AIX 5.3, "make aix53" (or aix53gcc)
- # ? for IBM RS/6000 or Power Series with AIX 6.1, "make aix61" (or aix53gcc)
- # ? for IBM RT PC with AIX 2.1, "make sys3"
- # ? for IBM RT PC with AIX 2.2.1, "make rtaix" or "make rtaixc"
- # ? for IBM RT PC with ACIS 4.2, "make bsd"
- # ? for IBM RT PC with ACIS 4.3, "make rtacis" or "make bsd KFLAGS=-DNOANSI"
- # ? for IBM RT PC with 4.3BSD/Reno, "make bsd44" or "make bsd44c"
- # ? for ICL DRS400 or 400E, "make iclsys5r3"
- # ? for ICL DRS3000 (80486) with DRS/NX, "make iclsys5r4_486"
- # ? for ICL DRS6000 (SPARC) with DRS/NX, "make iclsys5r4"
- # ? for ICL DRS6000 (SPARC) with DRS/NX 4.2MP 7MPlus, "make iclsys5r4m+"
- # ? Ditto but with IKSD support included, "make iclsys5r4m+iksd"
- # ? for Integrated Solutions Inc V8S VME 68020, "make isi"
- # ? for Intel 302 with Bell Tech Sys V/386 R3.2, "make sys5r3"
- # ? for Intel Xenix/286, "make sco286"
- # ? for Interactive System III (PC/IX), "make pcix" or "make is3"
- # ? for Interactive System III (PC/IX) with gcc, "make is3gcc"
- # ? for Interactive 386/ix 1.0.6 with TCP/IP networking, "make is5r3net2"
- # ? for Interactive 386/ix 2.0.x, "make is5r3" or (POSIX) "make is5r3p"
- # ? for Interactive 386/ix 2.0.x with TCP/IP networking, "make is5r3net"
- # or "make is5r3net2"
- # ? for Interactive 386/ix 2.2.1, job control, curses, no net, gcc,
- # "make is5r3gcc"
- # ? for Interactive UNIX Sys V R3.2 V2.2 - 4.0 without TCP/IP, "make is5r3jc"
- # ? for Interactive UNIX Sys V R3.2 V2.2 - 4.0 with TCP/IP, "make is5r3netjc"
- # ? for Intergraph Clipper, "make clix" or "make clixnet"
- # ? for Jolix (see 386BSD)
- # + for Linux 1.2 and later, "make linux". Uses ncurses. This version
- # handles serial speeds up to 460800 bps, Linux FSSTD 1.2, TCP/IP, and
- # should work on both libc and glibc systems. For static linking, use
- # "make linux LNKFLAGS=-static". Please read the comments that accompany
- # the linux entry. As of 8.0.212 Dev.10, this also includes Large File
- # Support (LFS).
- # + for Linux builds that fail with "sys/select.h: No such file or directory",
- # "make linuxns"
- # + for Linux 1.2 and later but with curses.h and libcurses (rather than
- # ncurses.h and libncurses), use "make linuxc".
- # + for Linux 1.2 and later with no curses support at all, "make linuxnc".
- # + for Linux with no TCP/IP, "make linuxnotcp"
- # (The following Linux targets are historic and might not work...)
- # ? for Red Hat Linux 7.1 through RH9, fully configured (krb5, SSL, etc):
- # "make redhat71", "make redhat72", "make redhat73", "make redhat80"
- # "make redhat9"
- # NOTE: You must use this target for Red Hat 7.1 since it
- # also includes a workaround for its broken curses library.
- # WARNING: These targets create binaries that include code for
- # strong encryption and are therefore not exportable. DO NOT PUT
- # THESE BINARIES ON US OR CANADIAN WEB OR FTP SITES.
- # ? for Linux on PowerMac (Mklinux DR3), "make mklinux".
- # ? for Linux 1.2 and later, to build with egcs, "make linuxegcs".
- # ? for Linux with lcc compiler, no TCP/IP, "make linuxnotcp-lcc"
- # ? for Linux 1.0 or earlier, "make linux10".
- # (End old linux targets)
- # ? for Mach 2.6 on (anything, e.g. DECstation), "make bsd42" or "make bsd43".
- # ? for MachTen (Tenon) 2.1.1.D on (e.g.) Apple Powerbook, "make machten".
- # ? for Masscomp RTU AT&T System III, "make rtu"
- # for other Masscomp, see Concurrent.
- # ? for Microport SV/AT (System V R2), "make mpsysv" (last edit tested: 144)
- # ? for Microport SVR4 2.2, 3.1, or 4.1 "make sys5r4sx"
- # ? for Microsoft,IBM Xenix (/286, PC/AT, etc), "make xenix" or "make sco286"
- # ? for MIPS System with RISC/os (UMIPS) 4.52 = AT&T SVR3, "make mips"
- # or "make mipstcpc"
- # ? for MkLinux on Power Macintosh, "make mklinux"
- # ? for Modcomp 9730, Real/IX, "make sys5r3" (or modify to use gcc = GLS cc)
- # ? for Modcomp Realstar 1000 with REAL/IX D.1, "make sv88r32"
- # ? for Motorola Four Phase, "make sys3" or "make sys3nid"
- # ? for Motorola Delta System V/68 R3, "make sv68r3"
- # ? for Motorola Delta System V/68 R3V5, "make sv68r3v5"
- # ? for Motorola Delta System V/68 R3V5.1, "make sv68r3v51"
- # ? for Motorola Delta System V/68 R3V6 with NSE TCP/IP, "make sv68r3v6"
- # ? for Motorola Delta System V/88 R32, "make sv88r32"
- # ? for Motorola Delta System V/88 R40, "make sv88r40"
- # ? for Mt Xinu Mach386 on 386/486-based PCs, "make bsd43"
- # ? for NCR Tower 1632, OS 1.02, "make tower1"
- # ? for NCR Tower 1632 or Minitower with System V R2, "make sys3"
- # or "make sys3nv"
- # ? for NCR Tower 32, OS Release 1.xx.xx, "make tower32-1"
- # ? for NCR Tower 32, OS Release 2.xx.xx, "make tower32-2"
- # ? for NCR Tower 32, OS Releases based on Sys V R3, "make tower32"
- # ? for NCR Tower 32, OS Releases based on Sys V R3 with gcc "make tower32g"
- # ? for NCR System 3000, AT&T UNIX System V R4 2.0, "make sys5r4sxna"
- # ? for NCR System 3000, AT&T UNIX System V R4 2.0 with Wollongong TCP/IP,
- # "make sys5r4net2" or "make sys5r4net2c".
- # Some header files might be misplaced; try this:
- # ln /usr/include/netinet/in.h /usr/include/sys/in.h
- # ln /usr/include/arpa/inet.h /usr/include/sys/inet.h
- # ln /usr/include/sys/termiox.h /usr/include/termiox.h
- # ? for NCR System 3000, NCR UNIX 02.02.01, same as above.
- # ? for NCR MP-RAS System V R4 V2.03 or 3.02, "make mpras" or "make mprastcpc"
- # + for NetBSD any version on any architecture, "make netbsd"
- # + for NetBSD with OpenSSL, "make netbsd+ssl"
- # ? for NetBSD with ncurses specified instead of curses, "make netbsdn"
- # ? for NetBSD with all curses support omitted, "make netbsdnc"
- # ? for NeXT with NeXTSTEP 1.0 through 3.2, "make next" (on a NeXT)
- # ? for NeXT with NeXTSTEP 3.3, "make next33"
- # ? for NeXT with OPENSTEP/Mach 4.1, "make nextquadfat".
- # ? for NeXT with OPENSTEP/Mach 4.2, "make openstep42".
- # ? for NeXTSTEP/486, "make next" (on a PC)
- # ? for NeXTSTEP portable binary (runs on Intel or Motorola), "make nextfat"
- # ? for NeXTSTEP portable binary (Intel, Motorola, HP PA-RISC, or SPARC),
- # "make nextquadfat"
- # ? for Nixdorf Targon/31, "make t31tos40x"
- # ? for Norsk Data Uniline 88/17 with SV/88 R3.2, "make sv88r32"
- # for Novell UnixWare - see UnixWare
- # ? for OSF/1 (vanilla, from OS/F), "make posix"
- # ? for OkiStation 7300 Series, "make sys5r4sxtcp"
- # ? for Olivetti LSX-3020 with X/OS R.2.3, "make xos23" or "make xos23c"
- # + for OpenBSD, "make openbsd" (also see secure targets listed below).
- # ? for OPENSTEP/Mach 4.1, "make nextquadfat" (NeXT, Intel, PA-RISC, SPARC)
- # ? for OPENSTEP/Mach 4.2, "make openstep42" (tested on NeXT)
- # ? for Perkin-Elmer (Concurrent) 3200 series, "make sys5".
- # ? for Perkin-Elmer (Concurrent) 3200 series with <dirent.h>, "make ccop1"
- # ? for Perkin-Elmer/Concurrent 3200 with Xelos R02, "make ccop1"
- # ? for PFU Compact A Series SX/A TISP V10/E50 (Japan), "make sxae50"
- # ? for Plexus, "make sys3"
- # ? for Pyramid 9XXX (e.g. 9845) or MIServer T series, OSx 4.4b thru 5.1,
- # "ucb make pyramid" or for HDB UUCP, "ucb make pyramid-hdb" or:
- # ? for Pyramid MIServer S or ES Series, DataCenter/OSx, "make pyrdcosx"
- # ? for Pyramid MIS-S MIPS R3000, DataCenter OSx System V R4, "make pyrdcosx"
- # ? for POSIX on anything, "make posix" (but adjustments might be necessary).
- # NOTE: this target is not very useful - many features are missing.
- # ? for Prime 8000 MIPS, SVR3, "make mips" or "make mipstcpc"
- # - for QNX 2.x (sorry we don't have a version of C-Kermit for QNX 2.x)
- # ? for QNX 4.0 or 4.1, 16-bit, on 286 PC, Watcom C 8.5, "make qnx16_41"
- # ? for QNX 4.21 - 4.22A (286+), and 4.23 (386+), or higher, 16-bit,
- # Watcom C 9.5x or higher, "make qnx16"
- # + for QNX 4.21-4.25, 32-bit, 386 or above, Watcom C 10.6, "make qnx32"
- # NOTE: ("make qnx" == "make qnx32")
- # ? for QNX Neutrino 2+, "make qnx_nto2+" (crosscompiled on QNX4 with Watcom C)
- # ? for QNX 6 = Neutrino 2.xx, "make qnx6"
- # ? for Ridge 32 (ROS3.2), "make ridge32"
- # ? for Samsung MagicStation, "make sys5r4"
- # ? for SCO Xenix 2.2.1 with development system 2.2 on 8086/8 "make sco86"
- # ? for SCO Xenix/286 2.2.1 with development system 2.2 on 80286, "make sco286"
- # NOTE: reportedly this makefile is too long for SCO Xenix/286 make, but it
- # works with "makeL", or if some of the other make entries are edited out.
- # ? for SCO Xenix/386 2.2.2, "make sco386"
- # ? for SCO Xenix/386 2.3.x, "make sco3r2"
- # ? for SCO Xenix/386 SCO 2.3.3 or 2.3.4 with gcc 1.37 or later,
- # "make sco386gcc" or (to add curses) "make sco386gccc".
- # ? for SCO Xenix/386 or UNIX/386 with Excelan TCP/IP, "make sco3r2net"
- # or (to add curses support) "make sco3r2netc" or "sco386netc"
- # + for SCO XENIX 2.3.4, "make sco234" or "make sco234c" to add curses.
- # ? for SCO XENIX 2.3.4 with SCO TCP/IP & curses, "make sco234netc".
- # ? for SCO Xenix 2.3.x with Racal-InterLan TCP/IP, "make sco3r2netri"
- # for other UNIX varieties with Racal Interlan TCP/IP, read sco3r2netri entry
- # ? for SCO Xenix 2.3.x with SCO (Lachman) TCP/IP, "make sco3r2lai"
- # or (to add curses) "make sco3r2laic"
- # for SCO UNIX... ALSO READ COMMENTS in the SCO UNIX entries for more info!
- # ? for SCO UNIX/386 3.2.0 or 3.2.1, "make sco3r2" or "make sco3r2x"
- # ? for SCO UNIX/386 3.2.2, "make sco3r22" or "make sco3r22gcc"
- # or "make sco3r22c"
- # ? for SCO UNIX/386 3.2.2 with SCO TCP/IP, "make sco3r22net"
- # or "make sco3r22netc" (curses)
- # ? for SCO ODT 1.1, "make sco3r22net" or "make sco3r22netc" (curses)
- # ? for SCO UNIX/386 3.2 V4.x, no network support, "make sco32v4"
- # ? or "make sco32v4ns" (this one uses no select() or sockets library)
- # ? for SCO UNIX/386 3.2 V4.x with TCP/IP, "make sco32v4net"
- # (also sco32v4gcc, sco32v4netgcc)
- # ? for SCO UNIX/386 3.2 V5.0 - see SCO OpenServer.
- # ? for SCO UNIX 3.2v4.x with TCP/IP, <dirent.h> for Extended Acer File
- # System (EAFS), curses, ANSI C compilation, "make sco32v4net"
- # ? or (to use select()-based CONNECT module) "make sco32v4netx".
- # ? for SCO UNIX 3.2v4.2, "make sco-odt30" (includes TCP/IP).
- # ? for SCO MPX 3.0 - The SCO UNIX binary runs on the corresponding MPX system.
- #
- # NOTE: Also see below for other entries that are variations on these.
- # Also be sure to read the comments accompanying each SCO entry.
- # Also see Unixware section.
- #
- # ? for SCO ODT 2.0, "make sco32v4net"
- # ? for SCO ODT 3.0, "make sco-odt30"
- # ? for SCO OpenServer 5.0 (OSR5), "make sco32v500"
- # ? for SCO OpenServer 5.0 (OSR5) with networking, "make sco32v500net"
- # ? for SCO OpenServer 5.0 (OSR5), gcc, "make sco32v500gcc"
- # ? for SCO OpenServer 5.0 (OSR5), gcc, with networking, "make sco32v500netgcc"
- # ? for SCO OpenServer 5.0 (OSR5), as above, ELF, "make sco32v500netgccelf"
- # ? for SCO OpenServer 5.0.2, use "make sco32v502xxx" entries as above.
- # ? for SCO OpenServer 5.0.4, use "make sco32v504xxx" entries as above.
- # ? for SCO OpenServer 5.0.5, use "make sco32v505xxx" entries as above.
- # Use the sco32v505udkxxx entries if you have the UDK rather than /bin/cc.
- # ? for SCO OpenServer 5.0.6, use "make sco32v506xxx" entries as above.
- # ? for SCO OpenServer 5.0.6a,use "make sco32v506axxx" entries as above.
- # ? for SCO OpenServer 5.0.7, use "make sco32v507", "make sco32v507net"
- # ? for SCO (Univel) UnixWare 1.x, "make unixware" or "make unixwarenetc".
- # If there are problems with this in C-K 7+ see notes at unixware entry.
- # + for SCO OpenServer 6.0.0, "make sco_osr600"
- # ? for SCO UnixWare 2.0.x, "make uw20"
- # ? for SCO UnixWare 2.1.0, "make uw21"
- # ? for SCO UnixWare 2.1.3, "make uw213"
- # + for SCO UnixWare 7, "make uw7" (includes large file support)
- # ? for SCO UnixWare 7 with IKSD support, "make uw7iksd" or "make uw7iksdudk"
- # ? for SCO UnixWare 7 with OpenSSL, "make uw7ssl"
- # ? for SCO (Caldera) Open UNIX 8, "make ou8"
- # ? for Sharp Zaurus SL5500 PDA, "make zsl5500".
- # ? for Sequent with DYNIX/ptx 1.2.1, "make dynixptx12"
- # ? for Sequent with DYNIX/ptx 1.3 or 1.4 with TCP/IP, "make dynixptx13"
- # ? for Sequent with DYNIX/ptx 2.0 or 2.1 with TCP/IP, "make dynixptx20"
- # or "dynixptx20c"
- # ? for Sequent with DYNIX/ptx 2.1.6 on i486, "dynixptx216c"
- # ? for Sequent with DYNIX/ptx V4.1.3 with TCP/IP, "make dynixptx41c"
- # ? for Sequent with DYNIX/ptx V4.4.2 with TCP/IP, "make dynixptx44"
- # ? for Sequent Balance 8000 or B8 with DYNIX 3.0.xx, "make dynix3"
- # or "make dynix3noacu"
- # ? for Sequent Symmetry S81 with DYNIX 3.0.xx, "make dynix3"
- # ? for Sequent DYNIX 3.1.xx, "make dynix31" or "make dynix31c"
- # ? for Siemens/Nixdorf SINIX-L Intel V5.41, "make sinix541i"
- # + for Siemens/Nixdorf SINIX-N MIPS V5.42, "make sinix542"
- # ? for Siemens/Nixdorf SINIX-P MIPS V5.42 with gcc, "make sinix542g"
- # ? for Siemens/Nixdorf SINIX-Z Intel V5.42, "make sinix542i"
- # ? for Siemens/Nixdorf Reliant UNIX V5.43, "make sni543"
- # ? for Siemens/Nixdorf Reliant UNIX V5.44, "make sni544"
- # ? for Silicon Graphics Iris System V IRIX 3.2 or earlier, "make iris"
- # ? for Silicon Graphics Sys V R3 with IRIX 3.3 or later, "make sys5r3"
- # ? for Silicon Graphics Iris Indigo with IRIX 4.0 or 5.0, "make irix40" or
- # (to include Yellow Pages and Curses) "make irix40ypc"
- # ? for Silicon Graphics Iris Indigo or Elan with IRIX 4.0.x with microcode
- # optimization and -O4, "make irix40u" or "irix40uc" (and read notes
- # accompanying these entries).
- # ? for Silicon Graphics IRIX 5.1, "make irix51" or "irix51x" (no optimize)
- # ? for Silicon Graphics IRIX 5.2, "make irix52"
- # ? for Silicon Graphics IRIX 5.3, "make irix53" or "irix53x" (no optimize)
- # ? for Silicon Graphics IRIX 6.0, "make irix60".
- # ? for Silicon Graphics IRIX 6.2, "make irix62".
- # ? for Silicon Graphics IRIX 6.3, "make irix63".
- # ? for Silicon Graphics IRIX 6.4, "make irix64" or "make irix64gcc".
- # + for Silicon Graphics (SGI) IRIX 6.5, "make irix65"
- # + or "make irix65mips2" to force MIPS2, or "make irix65gcc" for GCC.
- # + for Silicon Graphics (SGI) IRIX 6.5, "make irix65" or "make irix65mips2"
- # ? for SGI IRIX 6.5 with SSL/TLS, SRP, and ZLIB "make irix65+ssl+srp+zlib"
- # ? for Solaris 2.0-2.3 on SPARC or Intel, SunPro CC, "make solaris2x",
- # ? or to add SunLink X.25 8.0x support, "make solaris2x25".
- # ? for Solaris 2.4 built with gcc, "make solaris24g".
- # ? for Solaris 2.0-2.3 on SPARC or Intel, GNU CC, "make solaris2xg".
- # ? for Solaris 2.4 with X.25, "make solaris24x25".
- # ? for Solaris 2.5 on SPARC or Intel, SunPro CC, "make solaris25".
- # ? or to add SunLink X.25 8.0x support, "make solaris25x25".
- # ? for Solaris 2.5 on SPARC or Intel, GNU CC, "make solaris25g".
- # ? for Solaris 2.6 on SPARC or Intel, "make solaris26".
- # ? for Solaris 7 on SPARC or Intel, SunPro CC, "make solaris7".
- # ? for Solaris 7 on SPARC or Intel, GNU CC, "make solaris7g".
- # ? for Solaris 8 on SPARC or Intel, SunPro CC, "make solaris8".
- # ? for Solaris 8 on SPARC or Intel, GNU CC, "make solaris8g".
- # + for Solaris 9 on SPARC (or Intel?), 32-bit, SunPro CC, "make solaris9".
- # + for Solaris 9 on SPARC (or Intel?), 32-bit, GNU CC, "make solaris9g".
- # ? for Solaris 9 on SPARC (or Intel?), 64-bit, GNU CC, "make solaris9g64".
- # + for Solaris 10 on SPARC (or Intel?), 32-bit, SunPro CC, "make solaris10".
- # + for Solaris 10 on SPARC 64-bit, SunPro CC, "make solaris10_64".
- # + for Solaris 10 on SPARC (or Intel?), 32-bit, GNU CC, "make solaris10g".
- # ? for Solaris 10 on SPARC (or Intel?), 64-bit, GNU CC, "make solaris10g64".
- # ? for Solbourne 4/500 with OS/MP 4 "make sunos4"
- # ? for Solbourne 4/500 with OS/MP 4.1 "make sunos41" or "make sunos41c"
- # ? for SONY NEWS with NEWS-OS 4.0.1C, "make sonynews"
- # ? for SONY NEWS with NEWS-OS 4.1.2C, "make sonynews"
- # ? for Sperry/UNISYS 5000/20, UTS V 5.2 3R1, "make sys5"
- # ? for Sperry/UNISYS 5000/30/35/50/55, UTS V 5.2 2.01, "make unisys5r2"
- # ? for Sperry/UNISYS 5000/80 with System V R3, "make sys5r3"
- # ? for Sperry/UNISYS 5000/95 with System V R3, "make sys5r3"
- # For UNISYS SVR3 it might be necessary to "make sys5r3 KFLAGS=-UDYNAMIC"
- # ? for Stardent 1520, "make sys5r3"
- # ? for Stratus FTX 2.x, try "make ftx" or else "make sys5r4" or "sys5r4sx"
- # ? for Stratus FTX 3.x, PA-RISC 1.0 or 2.0, "make ftx" or "make ftxtcp"
- # ? for Sun with Sun UNIX 3.5 and gcc, "make sunos3gcc"
- # ? for Sun with pre-4.0 SunOS versions, "make bsd" (or appropriate variant)
- # ? for Sun with SunOS 4.0, BSD environment, "make sunos4"
- # ? for Sun with SunOS 4.0, BSD, with SunLink X.25, make sunos4x25
- # ? for Sun with SunOS 4.1 or 4.1.1, BSD environment, "make sunos41"
- # or "make sunos41c" (curses) or "make sunos41gcc" (compile with gcc)
- # ? for Sun with SunOS 4.1.x, BSD, with SunLink X.25 7.00 or earlier,
- # "make sunos41x25" or "make sunos41x25c" (curses)
- # ? for Sun with SunOS 4.1, 4.1.1, AT&T Sys V R3 environment, "make sunos41s5"
- # ? for Sun with SunOS 4.1.2, "make sunos41" or any of its variations.
- # NOTE: All SunOS 4.x systems -- Shared libraries are used by default.
- # If this causes problems, add -Bstatic to CFLAGS.
- # NOTE2: When building C-Kermit under SunOS for the BSD universe,
- # but /usr/5bin/cc is ahead of /usr/ucb/cc in your PATH, add
- # "CC=/usr/ucb/cc CC2=/usr/ucb/cc" to the make entry.
- # NOTE3: If an executable built on one type of Sun hardware does not work
- # on another type, rebuild the program from source on the target machine.
- # for Sun with Solaris 1.x use SunOS 4.1 entries.
- # for Sun with Solaris 2.0 and higher use Solaris entries.
- # + for Sun SPARC with Linux, "make linux"
- # ? for Sun SPARC with OPENSTEP/Mach 4.1, "make nextquadfat"
- # ? for Sun SPARC with OPENSTEP/Mach 4.2, "make openstep42"
- # - for Tandy 16/6000 with Xenix 3.0, "make trs16" (C-Kermit 7.0 is too big)
- # ? for Tektronix 6130/4132/43xx (e.g.4301) with UTek OS, "make utek"
- # or (for models without hardware flow control), "make uteknohwfc"
- # ? for Tektronix XD88 series with UTekV OS, "make utekvr3"
- # ? for Tri Star Flash Cache with Esix SVR3.2, "make sys5r3"
- # NOTE: The Tru64 builds have been failing since 2010, but "make dec-osf" is OK
- # ? for Tru64 UNIX 4.0E, "make tru64-40e"
- # ? for Tru64 UNIX 4.0F, "make tru64-40f"
- # ? for Tru64 UNIX 4.0G, "make tru64-40g"
- # ? for Tru64 UNIX 5.0A, "make tru64-50a"
- # ? for Tru64 UNIX 5.1A, "make tru64-51a"
- # ? for Tru64 UNIX 5.1B, "make tru64-51b"
- # ? for Unistar, "make sys5"
- # ? for Unisys S/4040 68040 CTIX SVR3.2 6.4.1, "make ctix" or "make sys5r3"
- # ? for Unisys U5000 UNIX SVR3 6.x, "make sys5r3" or "make sys5r3c"
- # ? for Unisys U6000 UNIX SVR4 1.x, "make sys5r4nx" or "make sys5r4nxnetc"
- # for Unisys ... (also see Sperry)
- # for Univel - see UnixWare
- # for Unixware - see SCO
- # ? for Valid Scaldstar, "make valid"
- # ? for Whitechapel MG01 Genix 1.3, "make white"
- # ? for Zilog ZEUS 3.21, "make zilog"
- #
- # The result should be a runnable program called "wermit" in the current
- # directory. After satisfactory testing, you can rename wermit to "kermit"
- # and put it in some directory that's in everybody's PATH, such as
- # /usr/local or /opt/local.
- #
- # To remove intermediate and object files, "make clean".
- # If your C compiler produces files with an extension other than "o",
- # then "make clean EXT=u", "make clean EXT=s", or whatever.
- #
- # To run lint on the source files, "make lintsun", "make lintbsd",
- # "make lints5", as appropriate.
- #
- # ******************************
- # SECURE TARGETS
- #
- # Beginning with C-Kermit 7.0, secure targets are included, as are the
- # source modules (ckuat*.[ch], ck_*.[ch]) needed to build them. Secure
- # target names are like the regular names, but with security features
- # indicated by plus (+) signs. The features are:
- #
- # krb4 MIT Kerberos IV
- # krb5 MIT Kerberos V
- # openssl OpenSSL (SSL/TLS)
- # zlib ZLIB compression for SSL/TLS
- # srp Stanford Secure Remote Password
- # pam PAM (pluggable authentication module)
- # shadow Shadow Password File
- #
- # You can build these targets if you have the Kermit source files and the
- # required libraries (Kerberos, OpenSSL, SRP, etc) and header files. See:
- # http://www.columbia.edu/kermit/security.html
- # for specific details regarding supported versions.
- #
- # NOTE: OpenSSL 0.9.6 and earlier are not compatible with 0.9.7 and later.
- # C-Kermit code was originally designed for 0.9.6. To build with 0.9.7 you
- # must add -DOPENSSL_097 to avoid missing symbols in the DES library and to
- # use the entry points that were renamed to avoid conflict with Kerberos 4.
- # If you have OpenSSL 0.9.8, add -DOPENSSL_098, which is a synonym for
- # -DOPENSSL_097. If you have 1.0.0 or later, add -DOPENSSL_100, which is
- # another synonym.
- # In OpenSSL builds add -ldl if you get unresolved references for
- # dlopen, dlclose, dlsym, and/or dlerror.
- #
- # In order to build a secure version of Kermit, you need to know the location
- # of the header (include) files and libraries for the desired form of
- # security. Unless you specify a location, this makefile looks in /usr/local
- # and if the required files are not found, the build fails.
- #
- # If the secure headers and libraries are not on your computer, you have
- # to download and install them, for example from http://www.openssl.org .
- #
- # The following symbols are used to specify library and header file locations:
- #
- prefix = /usr/local
- srproot = $(prefix)
- sslroot = $(prefix)
- manroot = $(prefix)
- K4LIB=-L/usr/kerberos/lib
- K4INC=-I/usr/kerberos/include
- K5LIB=-L/usr/kerberos/lib
- K5INC=-I/usr/kerberos/include
- SRPLIB=-L$(srproot)/lib
- SRPINC=-I$(srproot)/include
- SSLLIB=-L$(sslroot)/ssl/lib
- SSLINC=-I$(sslroot)/ssl/include
- # To override these assignments; for example, if your OpenSSL files are
- # not in /usr/local/ssl, invoke the desired target like this:
- #
- # make solaris9+openssl "SSLINC=-I/opt/openssl-0.9.8k/include" \
- # "SSLLIB=-L/opt/openssl-0.9.8k/lib"
- #
- # (don't set the variables and then do "make -e" because that breaks
- # chaining of makefile targets.)
- #
- # Here are some up-to-date secure targets as of Sep 2009:
- #
- # aix+openssl: IBM AIX 4.2 or later with OpenSSL
- # freebsd44+srp+openssl FreeBSD 4.4 with SRP and OpenSSL
- # freebsd50+openssl FreeBSD 5.0 with OpenSSL
- # hpux1100o+openssl: HP-UX 11.xx with OpenSSL
- # hpux1000gcc+openssl: HP-UX 10.xx with OpenSSL (build with gcc)
- # hpux1100gcc+openssl: HP-UX 11.xx with OpenSSL (build with gcc)
- # irix6x+krb5: IRIX 6.x with Kerberos V
- # irix65+krb5: etc etc...
- # solaris9+openssl Solaris 9,10, or 11 with Openssl (Sun cc)
- # solaris9g+openssl Solaris 9,10, or 11 with Openssl (gcc)
- # linux+ssl OpenSSL only
- # linux+krb5+ssl Linux with Kerberos 5 and OpenSSL
- # linux+krb5: Kerberos 5 only
- #
- # The following secure Linux targets have not been updated or tested recently.
- # linux+krb5+krb4:
- # linux+srp:
- # linux+srp+pam:
- # linux+srp+gmp:
- # linux+srp+gmp+no-des:
- # linux+srp+gmp-export:
- # linux+srp+gmp+pam:
- # linux+shadow+pam:
- # linux+openssl:
- # linux+openssl+shadow:
- # linux+openssl+zlib+shadow+pam:
- # linux+srp+openssl:
- # linux+krb5+krb4+srp:
- # linux+krb5+krb4+srp+openssl:
- # linux+krb5+krb4+openssl:
- # linux+krb5+krb4+openssl+shadow:
- # linux+krb5+krb4+openssl+zlib+shadow:
- # linux+krb5+krb4+srp-export:
- # linux+krb5+krb4+srp+pam:
- # linux+krb5+krb4+srp+openssl+pam-debug:
- # linux+krb5+krb4+srp+openssl+pam:
- # linux+krb5+krb4+srp+openssl+zlib+pam:
- # linux+krb5+krb4+openssl+shadow+pam:
- # linux+krb5+openssl+zlib+shadow+pam:
- #
- # The following have not been tested recently either and might
- # need adjustment.
- #
- # macosx+krb5+ssl: Mac OS X 10.3.9 or later + OpenSSL and Kerberos 5
- # macosx103+secure: This one is probably redundant
- # netbsd+openssl: NetBSD with OpenSSL
- # openbsd30+ssl: OpenBSD 3.0 with OpenSSL
- # redhat71,redhat72,redhat73,redhat80,redhat9 (Krb5,OpenSSL,Showdow,PAM,Zlib)
- # sco32v500net+ssl:
- # sco32v505net+ssl:
- # solaris2x+krb4:
- # solaris2xg+krb4:
- # solaris2xg+openssl+pam+shadow:
- # solaris2xg+openssl+zlib+pam+shadow:
- # solaris2xg+krb5+krb4+openssl+shadow:
- # solaris25+krb4:
- # solaris25g+krb4:
- # solaris26g+openssl:
- # solaris8g+openssl+zlib+pam+shadow:
- # solaris8g+krb4:
- # solaris9g+openssl+zlib+pam+shadow:
- # solaris9g+openssl+shadow+pam+zlib
- # sunos41gcc+krb4: SunOS 4.1 built with gcc with Kerberos IV
- # sunos41gcc+openssl: SunOS 4.1 built with gcc with OpenSSL
- # sunos41gcc+krb4+openssl: ...with Kerberos IV and OpenSSL
- # sunos41gcc+krb4+openssl+zlib: ditto, plus ZLIB compression
- # sunos41gcc+krb4+srp+openssl+zlib: ditto, plus SRP
- # sunos41gcc+srp+openssl+zlib:
- # tru64-51b-openssl: Tru64 (Digital) Unix 5.1B with OpenSSL
- # uw7ssl Unixware 7 with SSL
- #
- ###########################################################################
- #
- # Compile and Link variables:
- #
- # EXT is the extension (file type) for object files, normally o.
- # See MINIX entry for what to do if another filetype must be used.
- #
- EXT=o
- #LNKFLAGS=
- SHAREDLIB=
- CC= cc
- CC2= cc
- MAKE= make
- SHELL=/bin/sh
- ###########################################################################
- # (Ancient) UNIX V7-specific variables.
- # These are set up for Perkin-Elmer 3230 V7 Unix:
- #
- PROC=proc
- DIRECT=
- NPROC=nproc
- NPTYPE=int
- BOOTFILE=/edition7
- #
- # ( For old Tandy TRS-80 Model 16A or 6000 V7-based Xenix, use PROC=_proc,
- # DIRECT=-DDIRECT, NPROC=_Nproc, NPTYPE=short, BOOTFILE=/xenix )
- #
- ###########################################################################
- # SAMPLE INSTALLATION SCRIPT
- #
- # Modify to suit your own computer's file organization and permissions. If
- # you don't have write access to the destination directories, "make install"
- # fails. In most cases, a real installation also requires you to chown /
- # chgrp the Kermit binary for the UUCP lockfile and/or tty devices, and
- # perhaps also to chmod +s the corresponding permission fields.
- #
- # Default binary, man, and doc directories are supplied below. You can
- # override them in your 'make' command. Examples:
- #
- # make install # Accept defaults.
- # make "INFODIR=/usr/share/lib/kermit" install # Override INFODIR default.
- #
- # You can also build and install in one step, e.g.:
- #
- # make linux install
- #
- # If you use the 'install' target to install C-Kermit, it creates an
- # UNINSTALL script that can be used to uninstall it.
- #
- WERMIT = makewhat
- BINARY = wermit
- DESTDIR =
- BINDIR = $(prefix)/bin
- MANDIR = $(manroot)/man/man1
- MANEXT = 1
- SRCDIR =
- INFODIR =
- CERTDIR =
- TEXTFILES = COPYING.TXT ckcbwr.txt ckubwr.txt ckuins.txt ckccfg.txt \
- ckcplm.txt ckermit.ini ckermod.ini ckermit70.txt ckermit80.txt
- ALL = $(WERMIT)
- all: $(ALL)
- .c.o:
- $(CC) $(CFLAGS) -DKTARGET=\"$(KTARGET)\" -c $<
- #Clean up intermediate and object files
- clean:
- @echo 'Removing object files...'
- -rm -f ckcmai.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckcpro.$(EXT) ckcfns.$(EXT) \
- ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) ckucon.$(EXT) ckutio.$(EXT) \
- ckufio.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) ckwart.$(EXT) ckuusx.$(EXT) \
- ckuusy.$(EXT) ckcnet.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) ckusig.$(EXT) \
- ckucns.$(EXT) ckcmdb.$(EXT) ckuath.$(EXT) ckctel.$(EXT) ckclib.$(EXT) \
- ckcuni.$(EXT) ck_crp.$(EXT) ck_ssl.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \
- ckcpro.c wart wermit xermit kermit a.out
- show:
- @echo prefix=$(prefix)
- @echo srproot=$(srproot)
- @echo sslroot=$(sslroot)
- @echo manroot=$(manroot)
- @echo K4LIB=$(K4LIB)
- @echo K4INC=$(K4INC)
- @echo K5LIB=$(K5LIB)
- @echo K5INC=$(K5INC)
- @echo SRPLIB=$(SRPLIB)
- @echo SRPINC=$(SRPINC)
- @echo SSLLIB=$(SSLLIB)
- @echo SSLINC=$(SSLINC)
- @exit
- # Install C-Kermit after building -- IMPORTANT: Read the instructions above
- # (SAMPLE INSTALLATION SCRIPT). For SSL/TLS versions, ca_certs.pem file
- # should be installed in the appropriate place for your OpenSSL library, e.g.:
- #
- # cp ca_certs.pem /usr/local/ssl/
- # cp ca_certs.pem /usr/share/ssl/
- #
- # To make sure 'man' notices the new source file and doesn't keep
- # showing the old formatted version, remove the old formatted version,
- # something like this:
- # rm -f $(MANDIR)/../cat$(MANEXT)/kermit.$(MANEXT)
- # or this (which requires CATDIR to be defined):
- # rm -f $(CATDIR)/kermit.$(MANEXT)
- #
- # As of C-Kermit 8.0.205 this target also builds an UNINSTALL script, and
- # so it might be too long for some old Bourne shells, in which case you can
- # use a different shell:
- #
- # make SHELL=ksh install
- # make SHELL=/bin/posix/sh install
- #
- install:
- @echo Installing C-Kermit version $(CKVER)...;\
- rm -f UNINSTALL;\
- exec 3>./UNINSTALL;\
- echo "# C-Kermit UNINSTALL script" >&3;\
- echo "# `date`\n" >&3;\
- echo "CKVER=$(CKVER)" >&3;\
- echo "PrN Uninstalling C-Kermit version $(CKVER)..." >&3;\
- echo DESTDIR=$(DESTDIR);\
- if test -n "$(DESTDIR)"; then\
- if test -d $(DESTDIR); then\
- echo "$(DESTDIR) exists...\n";\
- else\
- echo "Creating $(DESTDIR)...";\
- DESTDIR=`echo $(DESTDIR) | sed 's!/*$$!!'`;\
- mkdir $$DESTDIR || exit 1;\
- fi;\
- chmod 755 $(DESTDIR) || exit 1;\
- fi;\
- echo BINARY=$(BINARY);\
- if test -f $(BINARY); then\
- ls -l $(BINARY);\
- else\
- echo "?$(BINARY) not found";\
- exit 1;\
- fi;\
- if test -z "$(DESTDIR)$(BINDIR)"; then\
- echo "Binary directory not specified";\
- exit 1;\
- fi;\
- if test -d $(DESTDIR)$(BINDIR); then\
- echo "$(DESTDIR)$(BINDIR) exists...";\
- else\
- echo "Creating $(DESTDIR)$(BINDIR)/...";\
- mkdir $(DESTDIR)$(BINDIR) || exit 1;\
- chmod 755 $(DESTDIR)$(BINDIR);\
- fi;\
- rm -f $(DESTDIR)$(BINDIR)/kermit;\
- cp $(BINARY) $(DESTDIR)$(BINDIR)/kermit || exit 1;\
- chmod 755 $(DESTDIR)$(BINDIR)/kermit || exit 1;\
- rm -f $(DESTDIR)$(BINDIR)/kermit-sshsub;\
- ln -s $(DESTDIR)$(BINDIR)/kermit\
- $(DESTDIR)$(BINDIR)/kermit-sshsub || exit 1;\
- echo 'set flag=f\nPrC Removing binaries' >&3;\
- echo "RmF $(DESTDIR)$(BINDIR)/kermit-sshsub" >&3;\
- echo "RmF $(DESTDIR)$(BINDIR)/kermit" >&3;\
- if test -f ckermit.ini; then\
- echo "#!$(BINDIR)/kermit" >\
- $(DESTDIR)$(BINDIR)/_tmp.ini;\
- cat ckermit.ini >> $(DESTDIR)$(BINDIR)/_tmp.ini;\
- mv $(DESTDIR)$(BINDIR)/_tmp.ini\
- $(DESTDIR)$(BINDIR)/ckermit.ini;\
- chmod 755 $(DESTDIR)$(BINDIR)/ckermit.ini;\
- echo "RmF $(DESTDIR)$(BINDIR)/ckermit.ini" >&3;\
- fi;\
- echo;\
- echo 'EfM' >&3;\
- echo "Kermit binary installed:";\
- ls -l $(DESTDIR)$(BINDIR)/kermit\
- $(DESTDIR)$(BINDIR)/kermit-sshsub\
- $(DESTDIR)$(BINDIR)/ckermit.ini;\
- echo;\
- echo " WARNING: If C-Kermit is to be used for dialing out,";\
- echo " you must change its owner and group and permissions";\
- echo " to match the 'cu' program. See the ckuins.txt file";\
- echo " for details.";\
- echo;\
- echo MANDIR=$(MANDIR);\
- if test -n "$(DESTDIR)$(MANDIR)"; then\
- if test -d $(DESTDIR)$(MANDIR); then\
- echo "$(DESTDIR)$(MANDIR) exists...";\
- else\
- echo "Creating $(MANDIR)...";\
- mkdir $(MANDIR) || exit 1;\
- chmod 755 $(MANDIR) || exit 1;\
- fi;\
- rm -f $(DESTDIR)$(MANDIR)/kermit.$(MANEXT);\
- cp ckuker.nr $(DESTDIR)$(MANDIR)/kermit.$(MANEXT) || exit 1;\
- chmod 644 $(DESTDIR)$(MANDIR)/kermit.$(MANEXT) || exit 1;\
- echo 'set flag=f\nPrC Removing man pages' >&3;\
- echo "RmF $(DESTDIR)$(MANDIR)/kermit.$(MANEXT)" >&3;\
- echo 'EfM' >&3;\
- echo;\
- else\
- echo "Not installing man page!\n";\
- fi;\
- echo CERTDIR=$(CERTDIR);\
- if test -n "$(CERTDIR)"; then\
- if test -f ca_certs.pem; then\
- if test -d $(CERTDIR); then\
- echo "$(CERTDIR) exists...";\
- else\
- echo "Creating $(CERTDIR)...";\
- mkdir $(CERTDIR) || exit 1;\
- chmod 755 $(CERTDIR) || exit 1;\
- fi;\
- echo "Installing certificates file...";\
- cp ca_certs.pem $(CERTDIR) || exit 1;\
- echo 'set flag=f' >&3;\
- echo 'PrC Removing certificates file' >&3;\
- echo "RmF $(CERTDIR)/ca_certs.pem" >&3;\
- echo 'EfM' >&3;\
- echo;\
- fi;\
- else\
- echo "Not installing certificates file!\n";\
- fi;\
- echo SRCDIR=$(DESTDIR)$(SRCDIR);\
- if test -n "$(SRCDIR)"; then\
- echo "Installing source files...";\
- if test -d $(DESTDIR)$(SRCDIR); then\
- echo "$(DESTDIR)$(SRCDIR) exists...";\
- else\
- echo "Creating $(DESTDIR)$(SRCDIR)/...";\
- mkdir $(DESTDIR)$(SRCDIR) || exit 1;\
- chmod 755 $(DESTDIR)$(SRCDIR);\
- fi;\
- echo "Copying source files to $(DESTDIR)$(SRCDIR)...";\
- echo 'set flag=f\nPrC Removing source files' >&3;\
- for TextFile in COPYING.TXT ck[cuw_]*.[cwh] makefile; do\
- cp $$TextFile $(DESTDIR)$(SRCDIR)/ && echo ".\c";\
- echo "RmF $(DESTDIR)$(SRCDIR)/$$TextFile" >&3;\
- done; echo;\
- echo 'EfM' >&3;\
- ( cd $(DESTDIR)$(SRCDIR)/ &&\
- ls -l COPYING.TXT ck[cuw_]*.[cwh] makefile );echo;\
- else\
- echo "Not installing source code!\n";\
- fi;\
- echo INFODIR=$(DESTDIR)$(INFODIR);\
- if test -n "$(INFODIR)"; then\
- echo "Installing info files...";\
- if test -d $(DESTDIR)$(INFODIR); then\
- echo "$(DESTDIR)$(INFODIR) exists...";\
- else\
- echo "Creating $(DESTDIR)$(INFODIR)/...";\
- mkdir $(DESTDIR)$(INFODIR) || exit 1;\
- chmod 755 $(DESTDIR)$(INFODIR);\
- fi;\
- echo "Copying text files to $(DESTDIR)$(INFODIR)...";\
- echo 'set flag=f\nPrC Removing text files' >&3;\
- FileCopyList='';\
- for TextFile in $(TEXTFILES); do\
- test -f $$TextFile || continue;\
- cp $$TextFile $(DESTDIR)$(INFODIR) && echo ".\c" &&\
- FileCopyList="$$FileCopyList $$TextFile";\
- echo "RmF $(DESTDIR)$(INFODIR)/$$TextFile" >&3;\
- done; echo;\
- echo 'EfM' >&3;\
- ( cd $(DESTDIR)$(INFODIR)/ && chmod 644 $$FileCopyList );\
- ( cd $(DESTDIR)$(INFODIR)/ && pwd && ls -l $$FileCopyList );\
- else\
- echo "Not installing text files!\n";\
- fi;\
- echo "set flag=d\nPrN Removing empty dirs..." >&3;\
- echo "RmD $(DESTDIR)$(BINDIR)" >&3;\
- echo "RmD $(DESTDIR)$(SRCDIR)" >&3;\
- echo "RmD $(DESTDIR)$(INFODIR)" >&3;\
- echo "RmD $(CERTDIR)" >&3;\
- echo "RmD $(MANDIR)" >&3;\
- echo "RmD $(DESTDIR)" >&3;\
- echo "EfM" >&3;\
- echo "PrN C-Kermit version $(CKVER) is uninstalled!" >&3;\
- echo C-Kermit version $(CKVER) installed!
- # UN-Install C-Kermit after building
- # Please to not remove the extra blanks before and after '{}' within the
- # functions. You would get syntax errors for some older Bourne shells! Best is
- # you don't change or remove anything.
- #
- uninstall:
- @if test ! -f UNINSTALL; then\
- echo "?C-Kermit UNINSTALL data file not found!";\
- exit 1;\
- fi; \
- X=`grep '^CKVER='$(CKVER)'$$' ./UNINSTALL || :`;\
- if test -z "$$X"; then\
- echo "?UNINSTALL file is not for C-Kermit version $(CKVER)";\
- exit 2;\
- fi;\
- PrN () { echo "$$*"; };\
- PrC () { echo "$$* \c"; };\
- RmF () { test -f "$$1" && rm -f "$$1" && echo ".\c" && flag=F ; };\
- RmD () { \
- dir=$$1;\
- while test -d "$$dir"; do\
- rmdir "$$dir" 2>&- || return && echo "$$dir" && flag=D;\
- dir=`echo "$$dir" | sed 's!/[^/]*/*$$!!'`;\
- done; \
- };\
- EfM () { \
- case "$$flag" in\
- f) echo "- Nothing to remove!";;\
- d) echo "Nothing to remove!";;\
- F) echo " done";;\
- D) echo "done";;\
- esac; \
- };\
- while read Act Args; do\
- case $$Act in\
- EfM) EfM;;\
- RmD) RmD $$Args;;\
- RmF) RmF $$Args;;\
- PrN) PrN $$Args;;\
- PrC) PrC $$Args;;\
- set) eval $$Args;;\
- esac;\
- done < ./UNINSTALL
- makewhat:
- @echo 'make what? You must tell which platform to make C-Kermit for.'
- @echo Examples: make linux, make aix, make solaris10, make hpux1100.
- @echo Please read the comments at the beginning of the makefile.
- ###########################################################################
- #
- # Dependencies Section:
- wermit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucon.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT)
- $(CC2) $(LNKFLAGS) -o wermit \
- ckcmai.$(EXT) ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckcpro.$(EXT) ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) \
- ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) \
- ckuusx.$(EXT) ckuusy.$(EXT) ckuusr.$(EXT) ckucon.$(EXT) \
- ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \
- ckusig.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \
- $(LIBS)
- # Preferred configuration with select()-based CONNECT
- xermit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) ckuath.$(EXT) \
- ck_crp.$(EXT) ck_ssl.$(EXT)
- $(CC2) $(LNKFLAGS) -o wermit \
- ckcmai.$(EXT) ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckcpro.$(EXT) ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) \
- ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) \
- ckuusx.$(EXT) ckuusy.$(EXT) ckuusr.$(EXT) ckucns.$(EXT) \
- ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckusig.$(EXT) \
- ckctel.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \
- ckuath.$(EXT) ck_crp.$(EXT) ck_ssl.$(EXT) $(LIBS)
- # Malloc Debugging version
- mermit: ckcmdb.$(EXT) ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckcpro.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) \
- ckuxla.$(EXT) ckucon.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
- ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \
- ckusig.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT)
- $(CC2) $(LNKFLAGS) -o mermit ckcmdb.$(EXT) ckclib.$(EXT) ckcmai.$(EXT)\
- ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
- ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckuusr.$(EXT) ckucon.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
- ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckcuni.$(EXT) \
- ckupty.$(EXT) ckcftp.$(EXT) $(LIBS)
- # Kerberized Version - Subject to USA export restrictions.
- # NOTE: We don't use this any more -- As of 15 Feb 2003, the "xermit"
- # target is used for both secure and regular version.
- krbmit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \
- ckcftp.$(EXT) ck_ssl.$(EXT)
- $(CC2) $(LNKFLAGS) -o krbmit ckcmai.$(EXT) ckclib.$(EXT) \
- ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
- ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
- ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
- ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) \
- ck_ssl.$(EXT) $(LIBS)
- krbmit-debug: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckcpro.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) \
- ckuxla.$(EXT) ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
- ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \
- ckusig.$(EXT) ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) \
- ckupty.$(EXT) ck_ssl.$(EXT) ckcmdb.$(EXT) ckcftp.$(EXT)
- $(CC2) $(LNKFLAGS) -o krbmit ckcmdb.$(EXT) ckcmai.$(EXT) \
- ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) \
- ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) \
- ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) \
- ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) \
- ckuusy.$(EXT) ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \
- ckcftp.$(EXT) ck_ssl.$(EXT) $(LIBS)
- # SRP(TM) Version - Subject to USA export restrictions.
- srpmit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \
- ckcftp.$(EXT) ck_ssl.$(EXT)
- $(CC2) $(LNKFLAGS) -o srpmit ckcmai.$(EXT) ckclib.$(EXT) \
- ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
- ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
- ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
- ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ck_ssl.$(EXT) \
- ckcftp.$(EXT) $(LIBS)
- # Kerberized Version - Not subject to USA export restrictions.
- krbmit-export: ckcmai.$(EXT) \
- ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckuath.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT)
- $(CC2) $(LNKFLAGS) -o krbmit-export ckcmai.$(EXT) ckclib.$(EXT) \
- ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
- ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
- ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
- ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) $(LIBS)
- # SRP(TM) Version - Not subject to USA export restrictions.
- srpmit-export: ckcmai.$(EXT) \
- ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
- ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
- ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
- ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
- ckuath.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT)
- $(CC2) $(LNKFLAGS) -o srpmit-export ckcmai.$(EXT) ckclib.$(EXT) \
- ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
- ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
- ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
- ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
- ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
- ckcuni.$(EXT) ckupty.$(EXT) ckcftp.$(EXT) $(LIBS)
- ###########################################################################
- # man page...
- #
- ckuker.nr:
- @echo This target is obsolete.
- @echo The ckuker.nr file no longer needs any preprocessing.
- ###########################################################################
- # Dependencies for each module...
- #
- ckcmai.$(EXT): ckcmai.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcnet.h ckcsig.h \
- ckuusr.h ckctel.h ckclib.h
- ckclib.$(EXT): ckclib.c ckclib.h ckcdeb.h ckcasc.h ckcsym.h
- ckcpro.$(EXT): ckcpro.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckclib.h
- ckcpro.c: ckcpro.w wart ckcdeb.h ckcsym.h ckcasc.h ckcker.h ckcnet.h ckctel.h \
- ckclib.h
- ./wart ckcpro.w ckcpro.c
- ckcfns.$(EXT): ckcfns.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h ckcuni.h \
- ckuxla.h ckclib.h ckcnet.h
- ckcfn2.$(EXT): ckcfn2.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h \
- ckuxla.h ckctel.h ckclib.h ckcnet.h ckcuni.h
- ckcfn3.$(EXT): ckcfn3.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h \
- ckuxla.h ckclib.h ckcuni.h
- ckuxla.$(EXT): ckuxla.c ckcker.h ckcsym.h ckcdeb.h ckcxla.h ckuxla.h ckclib.h \
- ckcuni.h
- ckcuni.$(EXT): ckcuni.c ckcdeb.h ckcker.h ckucmd.h ckcuni.h ckcxla.h ckuxla.h
- ckuusr.$(EXT): ckuusr.c ckucmd.h ckcker.h ckuusr.h ckcsym.h ckcdeb.h ckcxla.h \
- ckuxla.h ckcasc.h ckcnet.h ckctel.h ckclib.h ckcuni.h
- ckuus2.$(EXT): ckuus2.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
- ckcasc.h ckcnet.h ckcsym.h ckctel.h ckclib.h ckcuni.h
- ckuus3.$(EXT): ckuus3.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
- ckcasc.h ckcnet.h ckcsym.h ckctel.h ckclib.h ckcuni.h
- ckuus4.$(EXT): ckuus4.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
- ckcasc.h ckcnet.h ckuver.h ckcsym.h ckctel.h ckclib.h ckcuni.h
- ckuus5.$(EXT): ckuus5.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcnet.h \
- ckcsym.h ckctel.h ckclib.h ckcxla.h ckuxla.h ckcuni.h
- ckuus6.$(EXT): ckuus6.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcnet.h \
- ckcsym.h ckctel.h ckclib.h
- ckuus7.$(EXT): ckuus7.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
- ckcasc.h ckcnet.h ckcsym.h ckctel.h ckclib.h ckcuni.h
- ckuusx.$(EXT): ckuusx.c ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcsym.h \
- ckcsig.h ckcnet.h ckctel.h ckclib.h ckcxla.h ckuxla.h ckcuni.h
- ckuusy.$(EXT): ckuusy.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \
- ckclib.h
- ckucmd.$(EXT): ckucmd.c ckcasc.h ckucmd.h ckcdeb.h ckcsym.h ckctel.h ckclib.h
- ckufio.$(EXT): ckufio.c ckcdeb.h ckuver.h ckcsym.h ckclib.h \
- ckcxla.h ckuxla.h ckcuni.h
- ckutio.$(EXT): ckutio.c ckcdeb.h ckcnet.h ckuver.h ckcsym.h ckctel.h ckclib.h
- ckucon.$(EXT): ckucon.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \
- ckclib.h
- ckucns.$(EXT): ckucns.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \
- ckclib.h ckcxla.h ckuxla.h ckcuni.h
- ckcnet.$(EXT): ckcnet.c ckcdeb.h ckcker.h ckcnet.h ckcsym.h ckcsig.h ckctel.h \
- ckclib.h
- ckctel.$(EXT): ckcsym.h ckcdeb.h ckcker.h ckcnet.h ckctel.h ckclib.h
- # ck_off_t: ck_off_t.$(EXT)
- # $(CC) -o ck_off_t ck_off_t.$(EXT)
- wart: ckwart.$(EXT)
- $(CC) $(LNKFLAGS) -o wart ckwart.$(EXT) $(LIBS)
- ckcmdb.$(EXT): ckcmdb.c ckcdeb.h ckcsym.h ckclib.h
- ckwart.$(EXT): ckwart.c
- ckudia.$(EXT): ckudia.c ckcker.h ckcdeb.h ckucmd.h ckcasc.h ckcsym.h ckcsig.h \
- ckcnet.h ckctel.h ckclib.h
- ckuscr.$(EXT): ckuscr.c ckcker.h ckcdeb.h ckcasc.h ckcsym.h ckcsig.h \
- ckcnet.h ckctel.h ckclib.h
- ckusig.$(EXT): ckusig.c ckcasc.h ckcdeb.h ckcker.h ckcnet.h ckuusr.h \
- ckcsig.h ckctel.h ckclib.h
- ckcftp.$(EXT): ckcftp.c ckcdeb.h ckcasc.h ckcker.h ckucmd.h ckuusr.h \
- ckcnet.h ckctel.h ckcxla.h ckuxla.h ckcuni.h
- ckupty.$(EXT): ckupty.c ckupty.h ckcdeb.h
- ckuath.$(EXT): ckuath.c ckcdeb.h ckucmd.h ckuath.h ckuat2.h ckctel.h \
- ckclib.h ckcnet.h
- ck_crp.$(EXT): ck_crp.c ckcdeb.h ckcnet.h ckuath.h ckclib.h
- ck_ssl.$(EXT): ck_ssl.c ckcdeb.h ckucmd.h ckuath.h ckuat2.h ckctel.h \
- ckclib.h ck_ssl.h
- ###########################################################################
- #
- # Entries to make C-Kermit for specific systems.
- #
- # Put the ones that need short makefiles first.
- #Apollo Aegis 9.x. Includes TCP/IP support.
- #You can also add processor-dependent optimization switches like -M570.
- aegis:
- @echo Making C-Kermit $(CKVER) for Apollo Aegis 9.x...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DNOCSETS -DCK_CURSES -O $(KFLAGS)" \
- "LIBS = -lcurses -ltermcap"
- #Apple Mac II, A/UX pre-3.0
- #Warning, if "send *" doesn't work, try the auxufs makefile entry below.
- aux:
- @echo Making C-Kermit $(CKVER) for Macintosh A/UX...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DAUX -DTCPSOCKET $(KFLAGS) -i -O" "LNKFLAGS = -i"
- #Apple Mac II, A/UX pre-3.0, compiled with gcc
- auxgcc:
- @echo Making C-Kermit $(CKVER) for Macintosh A/UX...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DAUX -DTCPSOCKET -traditional $(KFLAGS) -i -O" \
- "LNKFLAGS = " "CC = gcc" "CC2 = gcc"
- #Apple Mac II, A/UX, pre-3.0, but with ufs file volumes, uses <dirent.h>.
- auxufs:
- @echo Making C-Kermit $(CKVER) for Macintosh A/UX...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DAUX -DTCPSOCKET -DDIRENT $(KFLAGS) -i -O" "LNKFLAGS = -i"
- #Apple Mac II, A/UX 3.0, compiled with gcc
- aux3gcc:
- @echo Making C-Kermit $(CKVER) for Macintosh A/UX 3.0...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DAUX -DHDBUUCP -DLFDEVNO -DTCPSOCKET -DDIRENT $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = $(LIBS)" \
- "CC=gcc -pipe -traditional" "CC2=gcc -pipe -traditional"
- #Apple Mac II, A/UX 3.0, compiled with gcc, uses curses
- aux3cgcc:
- @echo Making C-Kermit $(CKVER) for Macintosh A/UX 3.0...
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) aux3gcc \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DCK_CURSES" "LIBS = -lcurses $(LIBS)"
- # Tenon MachTen, tested on Apple Powerbook with MachTen 2.1.1.D.
- # NOTE: This doesn't do anything about UUCP. It only works if /usr/spool/uucp
- # has permission of 777, and dialout device is world read/writeable.
- machten:
- @echo Making C-Kermit $(CKVER) for MachTen...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD43 -DTCPSOCKET -DSIG_V -DNDGPWNAM -DCK_CURSES -O \
- $(KFLAGS)" "LIBS=-lcurses -ltermcap"
- #Bell Labs Research UNIX V10
- #Can't add TCP/IP because there is no sockets library. It would have to
- #be done using streams, but there is no code in C-Kermit for that.
- #Remove -DNOJC if desired (if your system has csh, ksh, or bash).
- bellv10:
- @echo Making C-Kermit $(CKVER) for Bell Labs Research UNIX V10...
- $(MAKE) wermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBELLV10 -DBSD4 -DNDIR -DNOJC -DNOSYSIOCTLH -DNOSETREU \
- -DNOCSETS -MINIDIAL $(KFLAGS)"
- # WARNING: The early BSD entries do not build in version 7.0 with the stock
- # BSD compiler: "Too many defines". Unless you can rebuild cpp to have more
- # space for defines, these builds must be accomplished by:
- # copying the /usr/include tree to someplace else, preprocessing there with cc
- # -E -I./include or whatever (plus all the same -D's, adding any necessary
- # -U/-D to override the architecture)), renaming the the resulting files back
- # to their original names, bringing them back to the original BSD system, and
- # running the make target there. This technique was used for 4.2 and 4.3 BSD
- # on a VAX in C-Kermit 7.0 (later, cpp on that machine was rebuilt to allow
- # more symbols, so the C-Kermit 8.0 build proceeds normally).
- #Berkeley Unix 4.1
- bsd41:
- @echo Making C-Kermit $(CKVER) for 4.1BSD...
- $(MAKE) wermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD41" "LIBS = -ljobs"
- #Berkeley 4.2, 4.3, also Ultrix-32 1.x, 2.x, 3.x, many others
- # Add -O, -s, etc, if they work.
- # If you have a version of BSD but signal() is void rather than int,
- # "make bsd KFLAGS=-DSIG_V".
- bsd42:
- @echo Making C-Kermit $(CKVER) for 4.2BSD...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DNOREALPATH -DNOTIMEH -DNOIKSD \
- -DCK_CURSES -DSYSTIMEBH -DNOPUTENV -DNOANSI -DBIGBUFOK -DBSD42HACK \
- $(KFLAGS)" "LIBS=-lcurses -ltermcap $(LIBS)"
- bsd:
- $(MAKE) CC=$(CC) CC2=$(CC2) bsd42 KTARGET=$${KTARGET-$(@)}
- #Berkeley Unix 4.2 or 4.3 with HoneyDanBer UUCP
- bsdhdb:
- @echo Making C-Kermit $(CKVER) for 4.2BSD with HDB UUCP...
- $(MAKE) CC=$(CC) CC2=$(CC2) bsd KTARGET=$${KTARGET-$(@)} \
- "KFLAGS= -DHDBUUCP $(KFLAGS)"
- #Berkeley Unix 4.3 with acucntrl program, curses, TCP/IP included.
- bsd43:
- @echo Making C-Kermit $(CKVER) for 4.3BSD...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DBSD43 -DTCPSOCKET -DNOREALPATH -DNOTIMEH -DNOIKSD \
- -DCK_CURSES -DACUCNTRL -DSYSTIMEBH -DNOPUTENV -DNOANSI -DBIGBUFOK \
- -DBSD42HACK $(KFLAGS)" "LIBS=-lcurses -ltermcap $(LIBS)"
- #4.3BSD, curses excluded
- bsd43nc:
- @echo Making C-Kermit $(CKVER) for 4.3BSD...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DBSD43 -DTCPSOCKET -DNOREALPATH -DNOTIMEH \
- -DACUCNTRL -DSYSTIMEBH -DNOIKSD -DNOPUTENV -DNOANSI -DBIGBUFOK \
- -DBSD42HACK $(KFLAGS)" "LIBS=$(LIBS)"
- #4.3BSD, TCP/IP excluded.
- bsd43nonet:
- @echo Making C-Kermit $(CKVER) for 4.3BSD + curses...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DBSD43 -DTCPSOCKET -DNOREALPATH -DNOTIMEH -DNOIKSD \
- -DCK_CURSES -DACUCNTRL -DSYSTIMEBH -DNOPUTENV -DNOANSI -DBIGBUFOK \
- -DBSD42HACK -DNONET $(KFLAGS)" "LIBS=-lcurses -ltermcap $(LIBS)"
- #Berkeley Unix 4.2 or 4.3 with lock directory /usr/spool/uucp/LCK/LCK..ttyxx,
- #but without acucntrl program
- bsdlck:
- @echo Making C-Kermit $(CKVER) for 4.2BSD, /usr/spool/uucp/LCK/...
- $(MAKE) CC=$(CC) CC2=$(CC2) bsd KTARGET=$${KTARGET-$(@)} \
- "KFLAGS= -DLCKDIR $(KFLAGS)"
- #Berkeley UNIX 4.4-Lite, 4.4-Encumbered, Net/2, etc (Post-Reno),
- #with TCP/IP networking. This was the basis for FreeBSD, NetBSD, OpenBSD,
- #BSDI, BSD/OS, and Mac OS X (each of which has its own set of targets that
- #are newer than this one).
- #
- #NOTE: This is not a pure POSIX configuration. Using -DPOSIX instead of
- # -DBSD44 prevents any kind of directory-reading (for wildcard expansion),
- #and disallows use of ENOTCONN symbol for detecting broken network
- #connections, and disallows RTS/CTS flow control, and would also require
- #definition of the appropriate UUCP lockfile convention.
- #Do not add -DCK_POSIX_SIG without reading <signal.h> first! For example,
- #sigsetjmp(), etc, tend to be defined but not implemented.
- #
- #NOTE: originally crypt was in libc - later it was unbundled.
- #Remove the LIBS clause to build on an early 4.4BSD platform.
- #
- bsd44:
- @echo Making C-Kermit $(CKVER) for 4.4BSD...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DTCPSOCKET $(KFLAGS) -O" "LIBS=-lcrypt"
- #Berkeley UNIX 4.4, as above, but with curses for fullscreen display
- #Please read notes for bsd44 entry just above.
- # NOTE: This one dumped core on the real 4.4BSD development system at
- # UC Berkeley (an HP-9000/300), so the no-curses version was used
- # for that one, which was unplugged years ago.
- bsd44c:
- @echo Making C-Kermit $(CKVER) for 4.4BSD with curses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET $(KFLAGS) -O" \
- "LIBS= -lcurses -ltermcap -lcrypt $(LIBS)"
- #For FreeBSD 1.x.
- freebsd1:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -funsigned-char \
- -DFNFLOAT -DNOHTERMCAP -DNOREALPATH -DNOSYSCONF $(KFLAGS) -O -pipe" \
- "LIBS= -lcurses -ltermcap -lm $(LIBS)"
- #FreeBSD 2.x with ncurses
- freebsd2:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 2.x with ncurses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DTCPSOCKET -DNOCOTFMC -DUSE_STRERROR \
- -DTPUTSARGTYPE=int -DTPUTSARG1CONST -DFREEBSD2 -funsigned-char \
- -DFNFLOAT $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -ltermlib -lcrypt -lm $(LIBS)"
- #For FreeBSD 2.x -- Uses curses rather than ncurses
- freebsd2c:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 2.x with curses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -DUSE_STRERROR \
- -DTPUTSARGTYPE=int -DTPUTSARG1CONST -DFREEBSD2 -DFNFLOAT \
- -funsigned-char $(KFLAGS) -O -pipe" \
- "LIBS= -lcurses -ltermlib -lcrypt -lm $(LIBS)"
- #FreeBSD 3.x with ncurses and uu_lock()
- #(Note: uu_lock() goes back to 2.2.2, but not necessarily 2.0)
- #OK 2011/08/20 FreeBSD 3.3
- freebsd3:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 3.x with ncurses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DTCPSOCKET -DNOCOTFMC -funsigned-char \
- -DTPUTSARGTYPE=int -DUSE_STRERROR -DFREEBSD3 -DUSE_UU_LOCK -DFNFLOAT \
- $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
- #As above but with curses rather than ncurses.
- freebsd3c:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 3.x with curses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -DUSE_UU_LOCK \
- -DTPUTSARGTYPE=int -DUSE_STRERROR -DFREEBSD3 $(KFLAGS) -DFNFLOAT \
- -funsigned-char -pipe -O" \
- "LIBS= -lcurses -lcrypt -lutil -lm $(LIBS)"
- #FreeBSD 4.0 with ncurses and uu_lock(). Note - there is no curses in 4.0.
- #ncurses 5.0 is broken requiring us to work around with setbuf().
- freebsd40:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.x with ncurses...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DTCPSOCKET -DNOCOTFMC -DFNFLOAT \
- -funsigned-char -DTPUTSARGTYPE=int -DUSE_STRERROR -DFREEBSD4 \
- -DNONOSETBUF -DUSE_UU_LOCK $(KFLAGS) -O -pipe" \
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
- #FreeBSD 4.1 and above
- #Like FreeBSD 4.0 but without the NONOSETBUF hack and with CK_NEWTERM.
- #NOTE: This target definitely does not work for FreeBSD 3.3 in 9.0.302.
- #and it has not been tested on 4 or 5.
- #OK 2011/06/xx FreeBSD 3.3, 4,4, 4.7, and 8.2
- #OK 2011/08/21 FreeBSD 3.3, 4.4, 6.4, 9.0
- freebsd freebsd41 freebsd72 freebsd5 freebsd6 freebsd7 freebsd8 freebsd9:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD 4.1 or later...'
- @if test `uname -r | cut -d . -f 1` -ge 8; then \
- HAVE_FBSD8='-DFREEBSD8'; \
- else HAVE_FBSD8=''; fi; \
- if test `uname -r | cut -d . -f 1` -ge 9; then \
- HAVE_FBSD9='-DFREEBSD9'; \
- else HAVE_FBSD9=''; fi; \
- if test -f /usr/include/utmpx.h ; \
- then HAVE_UTMPX='-DHAVEUTMPX' ; \
- else HAVE_UTMPX='' ; fi; \
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_NCURSES -DCK_NEWTERM -DTCPSOCKET -DNOCOTFMC \
- -DFREEBSD4 $$HAVE_FBSD8 $$HAVE_FBSD9 -DUSE_UU_LOCK -DFNFLOAT \
- $$HAVE_UTMPX -DHERALD=\"\\\" `uname -rs`\\\"\" \
- -funsigned-char -DTPUTSARGTYPE=int -DUSE_STRERROR $(KFLAGS) \
- -O2 -pipe"\
- "LIBS= -lncurses -lcrypt -lutil -lm $(LIBS)"
- #FreeBSD 5.0 or later with OpenSSL.
- #OK 2011/06/15 FreeBSD 4.7 and 8.2
- #OK 2011/08/20 FreeBSD 9.0-CURRENT
- freebsd+ssl freebsd+openssl freebsd50+openssl:
- @echo 'Making C-Kermit $(CKVER) for FreeBSD with Kerberos 5...'
- @case `openssl version` in \
- *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
- *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \
- *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \
- *) OPENSSLOPTION="" ;; \
- esac; \
- HAVE_DES=''; \
- DES_LIB=''; \
- if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \
- ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \
- DES_LIB='-ldes'; \
- HAVE_DES='-DCK_DES -DLIBDES'; \
- echo "HAVE DES"; \
- else echo "NO DES"; \
- fi; \
- $(MAKE) freebsd KTARGET=$${KTARGET:-$(@)} "CC = $(CC)" "CC2 = $(CC2)" \
- KFLAGS="-DCK_AUTHENTICATION -DCK_SSL $(SSLINC) -DZLIB $$OPENSSLOPTION \
- $$HAVE_DES $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS= -lncurses -lcrypt -lssl -lcrypto -lutil -lm \
- $(SSLLIB) $$DES_LIB $(LIBS)"; \
- if [ ! -f ./wermit ] || [ ./ckcmai.o -nt ./wermit ] ; then \
- echo ""; \
- echo "If build failed try:"; \
- echo ""; \
- echo " make clean ; make $${KTARGET:-$(@)} KFLAGS=-UCK_DES"; \
- echo ""; \
- fi
- #NetBSD 1.4.1 or later with vanity banner automated with uname
- #and automatic inclusion of large file support if it is available.
- #This target tested successfully on NetBSD 1.4.1, 1.5.2, and 2.0.3 (Jan 2006).
- #Fails on NetBSD 2.0 on Sun/3 mc68030 with gcc 3.3.3 unless optimization is
- #disabled on ckcfn2.c ("KFLAGS=-O0") (Letter O Digit Zero).
- #(This could be automated by testing `uname -m` for "sun3".)
- #OK: 2011/06/15 on NetBSD 1.5.2 and 5.1.
- #NetBSD 4.1: have to include <time.h>.
- #OK: 2011/08/21 on 5.1.
- #OK: (many more up through NetBSD 7.2.1)
- #OK: NetBSD 8.x
- #OK: 2020/08/24 NetBSD 9.0
- # `uname -r | grep "[6789].[0-9]" > /dev/null && echo '-DTIMEH'`
- netbsd netbsd2 netbsd15 netbsd16 old-netbsd:
- @echo Making C-Kermit $(CKVER) for NetBSD `uname -r` with curses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS=`grep fseeko /usr/include/stdio.h > /dev/null && \
- echo '-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'` \
- -DTIMEH -DBSD44 -DCK_CURSES -DTCPSOCKET -DUSE_STRERROR \
- -funsigned-char -DHERALD=\"\\\" `uname -s -r`\\\"\" \
- -DCK_DTRCD -DCK_DTRCTS -DTPUTSARGTYPE=int -DFNFLOAT $(KFLAGS) -O" \
- "LIBS= -lcurses -lcrypt -lm -lutil $(LIBS)"
- #NetBSD 1.4.1 or later with OpenSSL
- #OK: 2011/06/15 on NetBSD 5.1 (but not 1.5.2 with OpenSSL 0.9.5a)
- #OK: 2011/08/21 on 5.1.
- netbsd+ssl netbsd+openssl:
- @echo 'Making C-Kermit $(CKVER) for NetBSD+OpenSSL SSLLIB=$(SSLLIB)'
- @case `openssl version` in \
- *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
- *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \
- *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \
- *) OPENSSLOPTION="" ;; \
- esac; \
- HAVE_DES=''; \
- DES_LIB=''; \
- if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \
- ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \
- DES_LIB='-ldes'; \
- HAVE_DES='-DCK_DES -DLIBDES'; \
- echo "HAVE DES"; \
- else echo "NO DES"; \
- fi; \
- $(MAKE) netbsd KTARGET=$${KTARGET:-$(@)} "CC = $(CC)" "CC2 = $(CC2)" \
- "KFLAGS= -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_CAST $$HAVE_DES \
- -DCK_SSL -DCK_PAM -DZLIB -DNO_DCL_INET_ATON $$OPENSSLOPTION \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS= -L/usr/pkg/lib -R/usr/pkg/lib -lssl $$DES_LIB -lcurses \
- -lcrypto -lcrypt -lz -lm -lpam -lutil $(LIBS)"
- #NetBSD with MIT Kerberos 5:
- # OK 2011/06/15 (once K5INC and K5LIB were set right).
- # NOT OK for Heimdal - Heimdal Kerberos support in C-Kermit needs work.
- # OK: 2011/08/21 on 5.1.
- netbsd+krb5:
- @echo 'Making C-Kermit $(CKVER) for NetBSD with Kerberos 5...'
- @case `openssl version` in \
- *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
- *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \
- *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \
- *) OPENSSLOPTION="" ;; \
- esac; \
- HAVE_DES=''; \
- DES_LIB=''; \
- if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \
- ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \
- DES_LIB='-ldes'; \
- HAVE_DES='-DCK_DES -DLIBDES'; \
- echo "HAVE DES"; \
- else echo "NO DES"; \
- fi; \
- $(MAKE) netbsd KTARGET=$${KTARGET:-$(@)} "CC = $(CC)" "CC2 = $(CC2)" \
- "KFLAGS= -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_KERBEROS -DKRB5 \
- -DCK_CAST $$HAVE_DES -DNOFTP_GSSAPI $(K5INC) $(K5INC)/krb5 \
- $(KFLAGS)" \
- "LIBS= $(K5LIB) -L/usr/pkg/lib -R/usr/pkg/lib -lcurses $$DES_LIB \
- -lcrypto -lgssapi -lkrb5 -lm -lutil $(LIBS)"
- # NetBSD - With Kerberos 5 and SSL and Zlib.
- # OK: 2011/08/21 on 5.1 with MIT Kerberos.
- netbsd+krb5+ssl netbsd+krb5+openssl+zlib:
- @echo 'Making C-Kermit $(CKVER) for NetBSD+OpenSSL+Kerberos5...'
- @case `openssl version` in \
- *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
- *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \
- *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \
- *) OPENSSLOPTION="" ;; \
- esac; \
- HAVE_DES=''; \
- DES_LIB=''; \
- if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \
- ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \
- DES_LIB='-ldes'; \
- HAVE_DES='-DCK_DES -DLIBDES'; \
- echo "HAVE DES"; \
- else echo "NO DES"; \
- fi; \
- $(MAKE) netbsd KTARGET=$${KTARGET:-$(@)} "CC = $(CC)" "CC2 = $(CC2)" \
- "KFLAGS= -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_CAST $$HAVE_DES \
- -DCK_KERBEROS -DKRB5 -DNOFTP_GSSAPI $(K5INC) $(K5INC)/krb5 \
- -DCK_SSL -DCK_PAM -DZLIB -DNO_DCL_INET_ATON $$OPENSSLOPTION \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS= $(K5LIB) -L/usr/pkg/lib -R/usr/pkg/lib -lssl $$DES_LIB \
- -lcrypto -lcrypt -lgssapi -lkrb5 -lz -lm -lpam -lutil -lcurses $(LIBS)"
- #Special Security Enhanced NetBSD target with SRP, SSL, and zlib support.
- #To build this, you need to BUILD the pkgsrc srp_client package. After
- #you build it, you must go into work/srp-x.y.z/libkrypto and "bmake install"
- #then go to work/srp-x.y.z/libsrp and "bmake install". As of 2005Q3, the
- #pkgsrc install only installed the statically linked client applications. You
- #need to manually install the libraries to build your own applications.
- #NOT TESTED RECENTLY - probably needs work.
- netbsd+ssl+srp+zlib:
- @echo Making C-Kermit $(CKVER) for NetBSD with curses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DUSE_STRERROR -DNETBSD15 \
- -DCK_DTRCD -DCK_DTRCTS -DTPUTSARGTYPE=int \
- -I/usr/include/openssl -I/usr/pkg/include \
- -DCK_AUTHENTICATION -DCK_SRP -DPRE_SRP_1_4_5 -DCK_ENCRYPTION \
- -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DZLIB -DFNFLOAT $(KFLAGS) -O" \
- "LIBS= -L/usr/pkg/lib -R/usr/pkg/lib -lcurses -lsrp -lgmp -ldes \
- -lssl -lkrypto -lcrypto -lcrypt -lz -lm -lutil $(LIBS)"
- #NetBSD with curses left out (e.g. for use as IKSD).
- netbsdnc:
- @echo Making C-Kermit $(CKVER) for NetBSD with no curses...
- $(MAKE) CC=$(CC) CC2=$(CC2) netbsd KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOCURSES"
- #NetBSD with ncurses requested explicitly rather than curses-which-is-ncurses
- netbsdn:
- @echo Making C-Kermit $(CKVER) for NetBSD with curses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS=`grep fseeko /usr/include/stdio.h > /dev/null && \
- echo '-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'` \
- -DBSD44 -DCK_CURSES -DTCPSOCKET -DUSE_STRERROR \
- -DHERALD=\"\\\" NetBSD `uname -r`\\\"\" \
- -DCK_DTRCD -DCK_DTRCTS -DTPUTSARGTYPE=int -DFNFLOAT $(KFLAGS) -O" \
- "LIBS= -L/usr/pkg/lib -lncurses -lcrypt -lm -lutil $(LIBS)"
- #OpenBSD before 2.3.
- #Uses ncurses as its curses so use -ltermlib, not -ltermcap
- #But it doesn't use uu_lock() which was introduced in OpenBSD 2.3.
- #For that use the next entry.
- #Add -DMAINTYPE=int if you get complaints about main: return type is not int.
- openbsdold:
- @echo Making C-Kermit $(CKVER) for OpenBSD...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \
- -DFNFLOAT -DNDSYSERRLIST $(KFLAGS) -O" "LIBS= -lcurses -ltermlib -lm"
- #OpenBSD 2.3 or later
- #Add -DMAINTYPE=int if you get complaints about main: return type is not int.
- #For C-Kermit 8.0 (Christian Weisgerber):
- # -ltermlib removed (presumably because -lcurses==ncurses already includes it)
- # -DUSE_UU_LOCK and -lutil added for uu_lock()
- # -DNDSYSERRLIST changed to -DUSE_STRERROR
- #If this gives you trouble use the previous entry.
- #NOTE: The openbsd and openbsd+ssl should be reworked to be like the
- #corresponding FreeBSD and NetBSD targets. The mirbsd targets should
- openbsd:
- @echo Making C-Kermit $(CKVER) for OpenBSD 2.3 or later...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \
- -DHERALD=\"\\\" OpenBSD `uname -r`\\\"\" \
- -DUSE_UU_LOCK -DFNFLOAT -DUSE_STRERROR $(KFLAGS) -O" \
- "LIBS= -lcurses -lutil -lm"
- #Better to chain to the openbsd target but...
- mirbsd:
- @echo Making C-Kermit $(CKVER) for OpenBSD 2.3 or later...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \
- -DHERALD=\"\\\" MirBSD `uname -r`\\\"\" \
- -DUSE_UU_LOCK -DFNFLOAT -DUSE_STRERROR $(KFLAGS) -O" \
- "LIBS= -lcurses -lutil -lm"
- #OpenBSD 3.0 or later includes OpenSSL
- #Add -DMAINTYPE=int if you get complaints about main: return type is not int.
- #For C-Kermit 8.0 (Christian Weisgerber):
- # -ltermlib removed (presumably because -lcurses==ncurses already includes it)
- # -DUSE_UU_LOCK and -lutil added for uu_lock()
- # -DNDSYSERRLIST changed to -DUSE_STRERROR
- #If this gives you trouble use the previous entry.
- openbsd+ssl:
- @echo Making C-Kermit $(CKVER) for OpenBSD 3.0 or later...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \
- -DHERALD=\"\\\" OpenBSD `uname -r`\\\"\" \
- -DUSE_UU_LOCK -DFNFLOAT -DUSE_STRERROR -DCK_AUTHENTICATION \
- -DCK_SSL $(KFLAGS) -O" \
- "LIBS= -lcurses -lutil -lm -lssl -lcrypto"
- mirbsd+ssl:
- @echo Making C-Kermit $(CKVER) for OpenBSD 3.0 or later...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \
- -DHERALD=\"\\\" MirBSD `uname -r`\\\"\" \
- -DUSE_UU_LOCK -DFNFLOAT -DUSE_STRERROR -DCK_AUTHENTICATION \
- -DCK_SSL -DNO_DCL_INET_ATON $(KFLAGS) -O" \
- "LIBS= -lcurses -lutil -lm -lssl -lcrypto"
- # make 386bsd 0.0new, posix
- # for 386bsd 0.1.24, change /usr/include/termios.h to #define NCCS if
- # _POSIX_SOURCE is #defined. (source: lewine, posix prgmrs guide, o`reilly)
- #NOTE: Lock directory is /var/spool/lock. Formerly, it was /var/spool/uucp,
- #but reportedly <wjones@halcyon.com> that was due to a typo in 'man tip'.
- 386bsd:
- @echo 'Making C-Kermit $(CKVER) for jolix 386BSD 0.0new and 0.1.24...'
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DSETREUID -DPIDSTRING -DUSLEEP \
- -D_386BSD -DCK_CURSES -DTCPSOCKET \
- -DLOCK_DIR=\\\"/var/spool/lock\\\" \
- $(KFLAGS) -O" "LNKFLAGS = -s" "LIBS = -lcurses -ltermcap"
- # Mac OS X 10 early versions.
- # For 10.3.9 and later, use the macosx target below.
- #Mac OS X 1.0 (Rhapsody, Darwin) -- TCP/IP but no curses.
- oldmacosx10:
- @echo Making C-Kermit $(CKVER) for `uname -s`...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DTCPSOCKET -DUSE_STRERROR -O $(KFLAGS)"
- #Mac OS X 1.0 (Rhapsody, Darwin) -- TCP/IP and curses.
- #Note: curses must be obtained separately. See next entry for ncurses.
- #Add "LIBS = -lcurses -ltermcap" if necessary (but reportedly it is not).
- oldmacosx10c:
- @echo Making C-Kermit $(CKVER) for `uname -s` + curses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DCK_CURSES -DTPUTSFNTYPE=void -DTPUTSISVOID \
- -DTCPSOCKET -DUSE_STRERROR -O $(KFLAGS)"
- #Mac OS X 1.0 (Rhapsody, Darwin) -- TCP/IP and ncurses.
- #Note: ncurses must be obtained separately.
- #In the event of trouble with this one try the next one.
- oldmacosx10nc:
- @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DCK_NCURSES -DTCPSOCKET -DUSE_STRERROR -O \
- $(KFLAGS)" "LIBS= -lncurses $(LIBS)"
- #Mac OS X 10.2 (Jaguar) ncurses.
- oldmacosx102nc:
- @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DCK_NCURSES -DTCPSOCKET -DUSE_STRERROR -O \
- $(KFLAGS) " "LIBS= -lncurses $(LIBS)"
- #The problem here is that if curses.h also exists, it conflicts with
- #ncurses.h and and we have fatal errors. If this happens to you, then
- #try this target.
- oldmacosx10ncx:
- @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses...
- @rm -f ./curses.h; touch ./curses.h
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DCK_NCURSES -DTCPSOCKET -DUSE_STRERROR \
- -I. -O $(KFLAGS) " \
- "LIBS= -lncurses $(LIBS)"
- @rm -f ./curses.h
- #Mac OS X 10.3 (Panther) - Assumes ncurses is installed.
- oldmacosx103:
- @echo Making C-Kermit $(CKVER) for `uname -s` + ncurses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DMACOSX103 -DCK_NCURSES -DTCPSOCKET -DCKHTTP \
- -DUSE_STRERROR -DUSE_NAMESER_COMPAT -O \
- $(KFLAGS) " "LIBS= -lncurses -lresolv $(LIBS)"
- #Mac OS X 10.3 (Panther) with Kerberos 5 and SSL, assumes ncurses is installed.
- oldmacosx103+secure:
- @echo Making Secure C-Kermit $(CKVER) for `uname -s` + ncurses...
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DMACOSX103 -DCK_NCURSES -DTCPSOCKET \
- -DUSE_STRERROR -DUSE_NAMESER_COMPAT -O -DCK_PAM \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DZLIB \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \
- $(KFLAGS) " "LIBS= -lssl -lcrypto -lkrb5 -lcom_err \
- -lk5crypto -lgssapi_krb5 -lpam -lncurses -lresolv $(LIBS)"
- # THIS IS THE MAIN MAC OS X TARGET (the next one is for Kerberos/SSL builds).
- # Use this target for 10.3.9 (or maybe earlier) through 10.6 (maybe later)
- # on both Power and Intel architectures. This one uses utmp.h on 10.4 and
- # earlier and utmpx.h on 10.5 onwards.
- # Note: Mac OS X 10.5 and earlier are 32-bit; 10.6 and later 64-bit.
- # Note 2: As of C-Kermit 9.0 -DNOUUCP is included by default because
- # Mac OS X doesn't support UUCP. To undo this, use KFLAGS=-UNOUUCP.
- #OK: 2011/06/14 (for 10.4.11, 10.5.8, 10.6.7)
- macosx macosx10 macosx10.3.9 macosx10.4 macosx10.5 macosx10.6:
- @MACOSNAME=`/usr/bin/sw_vers -productName`; \
- MACOSV=`/usr/bin/sw_vers -productVersion`; \
- echo Making C-Kermit $(CKVER) for $$MACOSNAME $$MACOSV... ; \
- MACCPU=$$HOSTTYPE; \
- if test `uname -r | cut -d . -f 1` -gt 8; \
- then if test -f /usr/include/utmpx.h ; \
- then HAVE_UTMPX='-DHAVEUTMPX -D_UTMPX_COMPAT' ; \
- else HAVE_UTMPX='' ; fi ; fi; \
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 -DMACOSX103 -DCK_NCURSES -DTCPSOCKET -DCKHTTP \
- -DUSE_STRERROR -DUSE_NAMESER_COMPAT -DNOCHECKOVERFLOW -DFNFLOAT \
- -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $$HAVE_UTMPX \
- -funsigned-char -DNODCLINITGROUPS \
- -DNOUUCP -O -DHERALD=\"\\\" $${MACOSNAME} $${MACOSV}\\\"\" \
- -DCKCPU=\"\\\"$${MACCPU}\\\"\" \
- $(KFLAGS)" "LIBS= -lncurses -lresolv $(LIBS)"
- # Mac OS X 10.3.9 or later with Kerberos 5 and OpenSSL...
- # NOTE: Apple has removed all support for DES in OpenSSL and Kerberos
- # in Mac OS X 10.6 and later. The DES flags are included or left out
- # automatically based on the Mac OS X version number.
- # See note about UUCP in previous target.
- #OK: 2009/11/16 (for 10.3.9, 10.4.11, 10.5.8, 10.6.1)
- #OK: 2011/06/14 (for 10.4.11, 10.5.8, 10.6.7)
- macosx+krb5+ssl macosx10.5+krb5+ssl macosx10.6+krb5+ssl \
- macosx+krb5+openssl macosx10.5+krb5+openssl macosx10.6+krb5+openssl:
- @MACOSNAME=`/usr/bin/sw_vers -productName`; \
- MACOSV=`/usr/bin/sw_vers -productVersion`; \
- echo Making C-Kermit $(CKVER) for $$MACOSNAME $$MACOSV... ; \
- MACCPU=$$HOSTTYPE; \
- if test `uname -r | cut -d . -f 1` -gt 8; \
- then if test -f /usr/include/utmpx.h ; \
- then HAVE_UTMPX='-DHAVEUTMPX -D_UTMPX_COMPAT' ; \
- else HAVE_UTMPX='' ; fi ; fi; \
- if test `uname -r | cut -d . -f 1` -eq 7; \
- then IS_MACOSX103='-DMACOSX103' ; \
- else IS_MACOSX103='' ; fi; \
- case $$MACOSV in \
- 10.[012345].*) HAVE_DES='-DCK_DES -DLIBDES' ;; \
- *.*) HAVE_DES='' ;; \
- esac ; \
- if test -x /usr/bin/krb5-config ; \
- then HAVE_KRB5CONFIG=`/usr/bin/krb5-config --libs krb5 gssapi` ; \
- else HAVE_KRB5CONFIG='-lgssapi_krb5 -lkrb5 -lk5crypto \
- -lcom_err -lresolv' ; fi; \
- $(MAKE) CC=$(CC) CC2=$(CC2) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMACOSX10 $$IS_MACOSX103 -DCK_NCURSES -DTCPSOCKET \
- -DUSE_STRERROR -DUSE_NAMESER_COMPAT -DNOCHECKOVERFLOW -DFNFLOAT \
- -DCKHTTP -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $$HAVE_UTMPX \
- -DNODCLINITGROUPS -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DZLIB \
- -DCK_ENCRYPTION -DCK_CAST -DCK_SSL -DOPENSSL_098 $$HAVE_DES \
- -DNOUUCP -DHERALD=\"\\\" $${MACOSNAME} $${MACOSV}\\\"\" \
- -DCKCPU=\"\\\"$${MACCPU}\\\"\" \
- -funsigned-char -O $(KFLAGS)" \
- "LIBS= $$HAVE_KRB5CONFIG -lssl -lcrypto -lpam -lncurses $(LIBS)"
- # End of Mac OS X Section
- #Acorn RISCiX, based on ...
- #Berkeley Unix 4.2 or 4.3 with lock directory /usr/spool/uucp/LCK/LCK..ttyxx,
- #but without acucntrl program
- riscix:
- @echo Making C-Kermit $(CKVER) for RISCiX, /usr/spool/uucp/LCK..ttyxx
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD42 -DBSD4 -DRISCIX -DNOCSETS \
- -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DDIRENT -DCK_CURSES \
- -DMAXSP=9024 -DMAXRD=9024 -DSBSIZ=9050 -DRBSIZ=9050 \
- -DDFTTY=\\\"/dev/serial\\\" -DNOCSETS -DNOCYRIL \
- -DNOANSI -w -O2 -fomit-frame-pointer" \
- "LIBS= -lcurses -ltermcap " \
- "CC= /usr/ucb/cc" \
- "CC2= /usr/ucb/cc"
- #Acorn RISCiX, as above, but using gcc
- riscix-gcc:
- @echo Making C-Kermit $(CKVER) for RISCiX, /usr/spool/uucp/LCK..ttyxx
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD42 -DBSD4 -DRISCIX -DNOCSETS \
- -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DDIRENT -DCK_CURSES \
- -DMAXSP=9024 -DMAXRD=9024 -DSBSIZ=9050 -DRBSIZ=9050 \
- -DDFTTY=\\\"/dev/serial\\\" -DNOCSETS -DNOCYRIL \
- -DNOANSI -w -O2 -fomit-frame-pointer" \
- "LIBS= -lcurses -ltermcap " \
- "CC= gcc -mbsd" \
- "CC2= gcc -mbsd"
- #Convergent CTIX 6.4.1
- ctix:
- @echo 'Making C-Kermit $(CKVER) for Convergent CTIX 6.4.1'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DTCPSOCKET -DHDBUUCP -DCK_CURSES \
- -DNONAWS -DNOLEARN -DNOLONGLONG $(KFLAGS) -XO" \
- "LNKFLAGS=-s" "LIBS=-lsocket -lcurses -lc_s"
- mcs -d wermit
- # The following makefile entry should work for any Harris Night Hawk system
- # (either 88k or 68k based) running release 6.1 or later of the CX/UX
- # operating system. This is a POSIX and ANSI-C compliant system which also
- # supports BSD networking. (Earlier CX/UX releases will probably work with
- # sys5r3, but this has not been verified).
- #
- cx_ux:
- @echo Making C-Kermit $(CKVER) for Harris Night Hawk CX/UX 6.1 or later
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS=-DPOSIX -DTCPSOCKET -DHDBUUCP -DPID_T=pid_t -DWAIT_T=int \
- -Dd_ino=d_fileno -DUID_T=uid_t -DGID_T=gid_t -DNOLONGLONG \
- $(KFLAGS) -Xa -O3 -g" "LNKFLAGS=-O3"
- #Intergraph Clipper, CLIX, job control, HDB UUCP.
- clix:
- @echo 'Making C-Kermit $(CKVER) for Intergraph CLIX...'
- $(MAKE) wermit "CC=acc" "CC2=acc" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -w -DSVR3 -DCLIX -DDIRENT -DHDBUUCP -DNOSYSLOG -DUSE_MEMCPY \
- -DNOGETUSERSHELL -DNOREALPATH -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS=" "LIBS= -lbsd"
- #As above + TCP/IP...
- clixnet:
- @echo 'Making networked C-Kermit $(CKVER) for Intergraph CLIX...'
- $(MAKE) wermit "CC=acc" "CC2=acc" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -w -DSVR3 -DCLIX -DDIRENT -DHDBUUCP -DNOSYSLOG -DUSE_MEMCPY \
- -DTCPSOCKET -DNOGETUSERSHELL -DNOLEARN -DNOREALPATH $(KFLAGS) -O" \
- "LNKFLAGS=" "LIBS= -lbsd"
- #Mark Williams Coherent 286 or 386 on IBM PC family.
- #There is a 64K limit on program size, so this is a command-line only version.
- coherent:
- $(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DNOICP -DNOSETKEY -DNOLEARN \
- -DNOCSETS -DNOHELP -DNODIAL -DNOSCRIPT -DNODEBUG -DNOTLOG -DNOXMIT \
- -DNOMSEND -DNOFRILLS -DNOSYSIOCTLH -DSELECT_H $(KFLAGS) -VSUVAR" \
- -DNOFLOAT KTARGET=$${KTARGET:-$(@)} wermit
- #Mark Williams Coherent 386 on IBM PC family.
- #This will make a "minimum interactive" version - no scripts,
- #no character sets, no help, no dial, no debug/transaction logging, no
- #transmit, msend, mail, type, etc.
- coherentmi:
- $(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DNOSETKEY -DNOLEARN \
- -DNOSHOW -DNOCSETS -DNOHELP -DNODIAL -DNOSCRIPT -DNODEBUG -DNOTLOG \
- -DNOXMIT -DNOMSEND -DNOFRILLS -DNOSYSIOCTLH -DNOSERVER -DNOUUCP \
- -DNOSPL -DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ -DNOFLOAT \
- -DNOCMDL $(KFLAGS) -VSUVAR -DSELECT_H" KTARGET=$${KTARGET:-$(@)} \
- wermit
- #Mark Williams Coherent 386 on IBM PC/AT family.
- coherentmax:
- $(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DSELECT_H -DNOLEARN \
- -DNOFLOAT -DNOSYSIOCTLH $(KFLAGS) -VSUVAR" "LNKFLAGS = -O -s" \
- KTARGET=$${KTARGET:-$(@)} wermit
- #Mark Williams Coherent 386 4.2. Includes curses but not TCP/IP.
- #Requires updates to the 4.2.10 compiler; the regular compiler fails to
- #to handle "complex expressions". NOFLOAT is so it can work on old PCs
- #without floating-point hardware.
- coherent42:
- $(MAKE) "CFLAGS = -T500000 -DNOFLOAT -DCOHERENT -DNOANSI -DSELECT \
- -DNOSYSLOG -DDIRENT -DCK_CURSES -DCK_NEWTERM -DCK_WREFRESH -VSUVAR \
- -DDCLGETCWD -DNOSYSIOCTLH -DNOINITGROUPS -DNOSYMLINK -DSELECT_H \
- -DDCLGETCWD -O $(KFLAGS)" \
- "LNKFLAGS = -O -s" KTARGET=$${KTARGET:-$(@)} \
- "LIBS = -lsocket -lcurses" wermit
- #DEC Ultrix 2.x
- # Add -O, -DDYNAMIC, -s, etc, if they work.
- ultrix2x:
- @echo Making C-Kermit $(CKVER) for Ultrix 2.x ...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DDU2 -DNOGETUSERSHELL $(KFLAGS)"
- du2:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix2x
- #DEC Ultrix 3.0 and 3.1
- ultrix30:
- @echo Making C-Kermit $(CKVER) for Ultrix 3.0...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DDIRENT -DSIG_V -DNOGETUSERSHELL \
- -DULTRIX3 -DCK_CURSES $(KFLAGS) -O" "LIBS= -lcurses -ltermcap"
- du3:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix30
- ultrix3x:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix30
- #DEC Ultrix 4.0 or 4.1 on DECstation, VAXstation, VAX, etc.
- ultrix40:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.0 or 4.1...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DDU4 -DNOGETUSERSHELL \
- $(KFLAGS) -Olimit 1450" "LNKFLAGS = -s"
- #DEC Ultrix 4.2-4.5 on DECstation, DECsystem, VAXstation, VAX, etc.
- #Like ultrix40, except now C compiler supports -O2 optimization.
- ultrix42:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.2 or later...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL $(KFLAGS) \
- -O2 -Olimit 1750" "LNKFLAGS = -s"
- du42:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix42
- #DEC Ultrix 4.2-4.5 on DECstation, DECsystem, VAXstation, VAX, etc.
- #Like du42, but with curses support added and a couple features.
- ultrix42c:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.2 or later...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \
- -DCK_CURSES -DNOIKSD $(KFLAGS)-G6 -O2 -Olimit 3000 " \
- "LNKFLAGS = -s" "LIBS= -lcurses -ltermcap"
- ultrix43:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- "KFLAGS=-DULTRIX43 $(KFLAGS)" KTARGET=$${KTARGET-$(@)} ultrix42c
- ultrix43notcp:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- "KFLAGS=-DULTRIX43 -DNONET $(KFLAGS)" \
- KTARGET=$${KTARGET-$(@)} ultrix42c
- # NOTE: need -DNODEBUG on MIPS to avoid relocation errors at link time.
- # Actually now (8.0) that we have discovered the -G option maybe debugging
- # can be put back.
- ultrix44:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- "KFLAGS=-DULTRIX44 -G7 -DNODEBUG -DNETPTY -DNO_DEVTTY $(KFLAGS)" \
- KTARGET=$${KTARGET-$(@)} ultrix42c
- ultrix45:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- "KFLAGS=-DULTRIX45 $(KFLAGS)-DNETPTY -DNO_DEVTTY $(KFLAGS)" \
- KTARGET=$${KTARGET-$(@)} ultrix42c
- du42c:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- KTARGET=$${KTARGET-$(@)} ultrix42c
- #DEC Ultrix 4.3A or later on DECsystem and DECstation 5000/50, /150 or /260
- #with MIPS R4x00 processor. The "-mips3" switch generates R4000-specific
- #code, which is faster and more compact, but *won't* run on earlier
- #DECsystems and DECstations.
- ultrix43-mips3:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.3A or later, R4000 cpu...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \
- $(KFLAGS) -O2 -Olimit 1750 -mips3" "LNKFLAGS = -s -mips3"
- du43-mips3:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) ultrix43-mips3
- #DEC Ultrix 4.3A or later on MIPS R4x000 based systems.
- #Like ultrix43-mips3 but with curses support added
- ultrix43c-mips3:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.3A or later, R4000 cpu...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL -DCK_CURSES \
- $(KFLAGS) -O2 -Olimit 3000 -mips3" "LNKFLAGS = -s -mips3" \
- "LIBS= -lcurses -ltermcap"
- du43c-mips3:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- KTARGET=$${KTARGET-$(@)} ultrix43c-mips3
- #DEC Ultrix 4.4 on DECstation 5000/50 or /150 with R4000 MIPS processor,
- #or 5000/260 with R4400. The "-mips3" switch generates R4000-specific code,
- #which is faster and more compact but *won't* run on earlier DECstations.
- ultrix44-mips3:
- @echo Making C-Kermit $(CKVER) for Ultrix 4.4, R4000 cpu ...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \
- $(KFLAGS) -O2 -Olimit 1450 -mips3" "LNKFLAGS = -s -mips3"
- du44-mips3:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- KTARGET=$${KTARGET-$(@)} ultrix44c-mips3
- #DEC Ultrix 4.2 on DECstation, VAXstation, VAX, etc, System V R4 environment
- ultrix42s5r4:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4 on Ultrix...'
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS = -O2 -Olimit 1500 -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s"
- #OSF/1
- osf osf1:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
- -DCK_CURSES -DCK_RTSCTS -DFNFLOAT $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = $(LIBS) -lbsd -lcurses -ltermcap -lm"
- #DEC OSF/1 V1.0-1.3 on DECstation, VAX, Alpha, or PC.
- dec-osf dec-osf1:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD4 -DOSF -DOSF13 -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
- -DNOREALPATH -DNOIKSD -DCK_CURSES -DCK_RTSCTS -DFNFLOAT -DNODEBUG \
- -DNOUNICODE $(KFLAGS)" \
- "LNKFLAGS = -non_shared" "LIBS = -lbsd -lcurses -ltermcap -lm"
- # This one causes "relocation out-of-range" errors in the linker.
- old-dec-osf:
- @echo Making C-Kermit $(CKVER) for DEC OSF/1 V1.x...
- @echo If you are building for DEC OSF/1 2.0, please use dec-osf20.
- @echo Remove or adjust -O2 and/or -Olimit if they cause trouble.
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -O2 -Olimit 2400 $(KFLAGS)"
- #DEC OSF/1 2.0 on Alpha and probably nowhere else.
- #The only difference from OSF/1 is that optimization is omitted.
- #The optimized version gets strange runtime errors, like the PAUSE command
- #not working. Add "-unsigned" to make all chars unsigned.
- dec-osf20:
- @echo Making C-Kermit $(CKVER) for DEC OSF/1 V2.0...
- @echo Optimization omitted because it causes runtime errors.
- @echo See comments in makefile.
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF20 $(KFLAGS)"
- dec-osf30:
- @echo Making C-Kermit $(CKVER) for DEC OSF/1 V3.0...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF30 -O2 -Olimit 2400 $(KFLAGS)"
- #Digital UNIX 3.2
- # Must compile ckuus[6x].c separately without optimization otherwise
- # the optimizer dumps core - keep CFLAGS here in sync with those from osf.
- du32:
- @echo Making C-Kermit $(CKVER) for Digital UNIX 3.2...
- $(MAKE) CC=$(CC) CC2=$(CC2) ckuus6.$(EXT) \
- "CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
- -DCK_CURSES -DCK_RTSCTS -DFNFLOAT -DOSF32 -DHDBUUCP $(KFLAGS)"
- $(MAKE) CC=$(CC) CC2=$(CC2) ckuusx.$(EXT) \
- "CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
- -DCK_CURSES -DCK_RTSCTS -DFNFLOAT -DOSF32 -DHDBUUCP $(KFLAGS)"
- $(MAKE) CC=$(CC) CC2=$(CC2) osf \
- "KFLAGS= -DOSF32 -DHDBUUCP -O2 -Olimit 3200 $(KFLAGS)"
- dec-osf32:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) du32 \
- KTARGET=$${KTARGET:-$(@)}
- #Digital UNIX 4.0 through 4.0D (use tru64 targets for 4.0E and above)...
- du40:
- @echo Making C-Kermit $(CKVER) for Digital UNIX 4.0...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DHDBUUCP -DFNFLOAT \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
- du40gcc:
- @echo Making C-Kermit $(CKVER) for Digital UNIX 4.0 with gcc ...
- $(MAKE) osf CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DHDBUUCP $(KFLAGS)"
- #Tru64 Unix 4.0E
- tru64-40e:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0E...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DOSF40E -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
- tru64-40f:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0F...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DOSF40F -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
- tru64-40g:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0G...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DOSF40G -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
- tru64-50a:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.0A...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DTRU64 -DOSF50 -DHDBUUCP \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)"
- tru64-51a:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.1A...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DTRU64 -DOSF50 -DOSF51A -DHDBUUCP \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)"
- tru64-51b:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.1B...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DTRU64 -DOSF50 -DOSF51A -DOSF51B -DHDBUUCP \
- -unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)"
- # Added 5.1b version with OpenSSL - CDW 6-13-2005...
- tru64-51b+openssl:
- @echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.1b
- @echo including OpenSSL...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DTRU64 -DOSF50 -DOSF51A -DOSF51B -DHDBUUCP \
- -unsigned -std1 -O3 -Olimit 2400 \
- -DCK_AUTHENTICATION -DCK_SSL $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -rpath $(sslroot)/ssl/lib -lssl -lcrypto"
- du50:
- $(MAKE) CC=$(CC) CC2=$(CC2) tru64-50a KTARGET=$${KTARGET:-$(@)}
- du40-ridiculous-checking:
- @echo Making C-Kermit $(CKVER) for Digital UNIX 4.0.
- @echo Checking everything - assumes DECC...
- $(MAKE) CC=$(CC) CC2=$(CC2) osf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= -DOSF40 -DHDBUUCP -w0 -warnprotos -check -portable \
- -unsigned -std1 -O3 -Olimit 1760 $(KFLAGS)"
- #Sequent DYNIX/ptx 1.2.1
- dynixptx12:
- @echo Making C-Kermit $(CKVER) for Sequent DYNIX/ptx 1.2.1...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DPTX -DNOGETUSERSHELL -DNOLEARN \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
- #Sequent DYNIX/ptx 1.3 or 1.4
- dynixptx13:
- @echo Making C-Kermit $(CKVER) for Sequent DYNIX/ptx 1.3 TCP/IP...
- $(MAKE) xermit "CFLAGS= -O KTARGET=$${KTARGET:-$(@)} \
- -DSVR3 -DDIRENT -DHDBUUCP -DPTX -DCK_POLL -DNOGETUSERSHELL \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DTCPSOCKET $(KFLAGS) -i" \
- "LNKFLAGS = -i" "LIBS = -lsocket -linet -lnsl"
- #Sequent DYNIX/ptx 2.0, ANSI C compilation
- #Should work on any hardware platform when DYNIX/ptx runs, including
- #386, 486, Pentium.
- dynixptx20:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET \
- -DWAIT_T=int -DPTX -DNOGETUSERSHELL $(KFLAGS) -O" \
- "LIBS = -lsocket -linet -lnsl"
- #Sequent DYNIX/ptx 2.0, ANSI C compilation, with curses
- dynixptx20c:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET -DWAIT_T=int -DPTX -DCK_CURSES \
- -DCK_NEWTERM -DNOGETUSERSHELL $(KFLAGS) -O" \
- "LIBS = -lsocket -linet -lnsl -lcurses -ltermcap"
- #Sequent DYNIX/ptx 2.1.6, 80486, ANSI C compilation, with curses:
- # -Xa -- use ANSI compiler.
- # -Wc,-pw -- suppress portability warnings.
- # -Wc,-i386 -- 80386 cpu.
- # -Wc,-i486 -- 80486 cpu.
- # -Wc,-P5 -- Pentium (default).
- # -Wc,-O3 -- highest optimization.
- # -Wa,-N17061 -- increase symbol table from default of 15013 for ckcuni.c.
- # Early versions of DYNIX/ptx 2.1.x may need -DCK_POLL instead of -DSELECT.
- # Add "$&" after the colon in the "xermit" target for parallel makes.
- dynixptx216c:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.1.6'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DHDBUUCP -DDYNAMIC -DTCPSOCKET \
- -DSELECT -DCK_REDIR -DCK_NAWS -DCK_WREFRESH -DSW_ACC_ID \
- -DTCP_NODELAY=1 -DTRMBUFL=2048 -DBIGBUFOK -DHADDRLIST \
- -DPTX -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL -DNOREALPATH \
- $(KFLAGS) -Xa -Wc,-pw -Wc,-i486 -Wc,-O3 -Wa,-N17061" \
- "LIBS = -lXbsd -lseq -lsocket -linet -lnsl -lmalloc -lm -lcurses" \
- "LNKFLAGS = -s"
- #Sequent DYNIX/ptx 2.1.6, gcc 2.7.2.2, with curses:
- dynixptx216cgcc:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.1.6 gcc'
- $(MAKE) xermit "CC = gcc" "CC2 = gcc" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DHDBUUCP -DDYNAMIC -DTCPSOCKET \
- -DSELECT -DCK_REDIR -DCK_NAWS -DCK_WREFRESH -DSW_ACC_ID \
- -DTCP_NODELAY=1 -DTRMBUFL=2048 -DBIGBUFOK -DHADDRLIST \
- -DPTX -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL -DNOREALPATH \
- $(KFLAGS) -O3 -pipe -funsigned-char" \
- "LIBS = -lXbsd -lseq -lsocket -linet -lnsl -lmalloc -lm -lcurses" \
- "LNKFLAGS = -s"
- #Sequent DYNIX/ptx 4.0, ANSI C compilation, with curses
- dynixptx41c:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 4.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET \
- -DWAIT_T=int -DPTX -DPTX4 -DCK_CURSES -DCK_NEWTERM \
- -DNOGETUSERSHELL $(KFLAGS) -O" \
- "LIBS = -lsocket -lnsl -lcurses -ltermcap"
- #Sequent DYNIX/ptx 4.4, ANSI C compilation, with curses
- dynixptx44:
- @echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 4.4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPTX -DPTX4 -DPOSIX -DHDBUUCP -DTCPSOCKET -DWAIT_T=int \
- -DCK_CURSES -DCK_NEWTERM -DBIGBUFOK -DSELECT -DNOGETUSERSHELL \
- $(KFLAGS) -O" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
- #Sequent DYNIX 3.0.x
- dynix3:
- @echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.0.x...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD43 -DACUCNTRL -DTCPSOCKET -O \
- -DPWUID_T=int -DGID_T=int $(KFLAGS)"
- #Sequent DYNIX 3.0.x, no ACUCNTRL
- dynix3noacu:
- @echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.0.x...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD43 -DLCKDIR -DTCPSOCKET -O \
- -DUID_T=int -DGID_T=int $(KFLAGS)"
- #Sequent DYNIX 3.1.x
- dynix31:
- @echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.1.x...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DDCLPOPEN -DLCKDIR -DBSD4 -DTCPSOCKET $(KFLAGS)"
- #Sequent DYNIX 3.1.2, as above but with curses, to be compiled by gcc 2.3.3.
- dynix31c:
- @echo 'Making C-Kermit $(CKVER) for Sequent DYNIX 3.1.2, curses...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O2 -DDCLPOPEN -DACUCNTRL \
- -DBSD43 -DTCPSOCKET -DCK_CURSES -DUID_T=int \
- $(KFLAGS)" "LIBS= -lcurses -ltermcap"
- #Convex C1 with Berkeley Unix
- convex:
- @echo Making C-Kermit $(CKVER) for Convex C1 / BSD...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD4 -DNOLEARN $(KFLAGS) -Dmsleep=mnap"
- #Convex C210 with Convex/OS 8
- convex8:
- @echo Making C-Kermit $(CKVER) for Convex C210 with OS 8
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DNODEBUG -DDIRENT -DNOFILEH \
- $(KFLAGS) -DSIG_V -Dmsleep=mnap"
- #Convex C2 with Convex OS 9.1 (should also work with 8.1 or later)
- #with ANSI C compiler, uses BSD 4.3 uucp lockfile convention.
- convex9:
- @echo Making C-Kermit $(CKVER) for Convex C210 with OS 9.1
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DCONVEX9 -DNOIEXTEN -DDIRENT -DNOFILEH -DTCPSOCKET \
- -D__STDC__ -DLCKDIR -Dmsleep=mnap -O -ext -tm c1 $(KFLAGS)" \
- "LNKFLAGS = -ext"
- #Convex C2 with Convex OS 10.1 or later
- #with gcc 2.x C compiler
- convex10gcc:
- @echo Making C-Kermit $(CKVER) for Convex C2 with OS 10.1 using gcc
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DCONVEX9 -DNOIEXTEN -DDIRENT -DNOFILEH -DTCPSOCKET \
- -D__STDC__ -Dmsleep=mnap -O2 $(KFLAGS)" CC=gcc CC2=gcc
- #Cray X-MP or Y-MP UNICOS 6.x or 7.x.
- #NOTE: NPROC tells how many parallel makes to run. If your Cray has multiple
- #processors, you can set NPROC up to the number of CPUs, e.g. NPROC=16.
- cray:
- @echo 'Making C-Kermit $(CKVER) for Cray X/Y-MP UNICOS 6.x or 7.0...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS) -O1"
- #Cray X-MP or Y-MP UNICOS 8.0 Alpha.
- cray8:
- @echo 'Making C-Kermit $(CKVER) for Cray X/Y-MP UNICOS 8.0 Alpha...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \
- "CFLAGS= -DSVR4 -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS) -O1"
- #Cray X-MP or Y-MP UNICOS 9.0.
- #This one was executed successfully for C-Kermit 8.0.209.
- #Earlier versions of Unicos will probably need the same flags.
- cray9:
- @echo 'Making C-Kermit $(CKVER) for Cray X/Y-MP UNICOS 9.0...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \
- "CFLAGS= -DSVR4 -DDIRENT -DHDBUUCP -DNOLFDEVNO \
- -DTCPSOCKET $(KFLAGS) -O1"
- #Cray-2 or Cray 3-CSOS
- #NOTE: NPROC tells how many parallel makes to run. If your Cray has multiple
- #processors, you can set NPROC up to the number of CPUs, e.g. NPROC=16.
- craycsos:
- @echo 'Making C-Kermit $(CKVER) for Cray-2/3 CSOS
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET \
- $(KFLAGS) -DCK_ANSIC -DCK_CURSES" "LIBS=-lnet"
- #NeXTSTEP 1.0 through 3.2.
- #Includes fullscreen file transfer display (curses) and TCP/IP support.
- #Uses shared library to make executable program about 80K smaller.
- #Remove "LIBS = -lsys_s" if this causes trouble.
- next:
- @echo Making C-Kermit $(CKVER) for NeXTSTEP...
- @echo 'If you get errors in ckutio.c about w_S, w_T, etc,'
- @echo 'add KFGLAGS=-DNOREDIRECT to your make command.'
- $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
- -pipe -DCK_CURSES $(KFLAGS) -O -w" "LIBS = -lsys_s -lcurses -ltermcap"
- nextc:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \
- KTARGET=$${KTARGET:-$(@)}
- nextg:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \
- KFLAGS=-Wall KTARGET=$${KTARGET:-$(@)}
- nextgc:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \
- KFLAGS=-Wall KTARGET=$${KTARGET:-$(@)}
- #NeXTSTEP 3.3.
- #Includes fullscreen file transfer display and TCP/IP.
- # You might have to add 1 line to 1 NeXT header file <ip.h>
- # to declare n_long as u_long by adding #include <bsd/netinet/in_systm.h>
- next33:
- @echo Making C-Kermit $(CKVER) for NeXTSTEP 3.3...
- $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
- -pipe -DCK_CURSES $(KFLAGS) -O -w" "LIBS = -lsys_s -lcurses -ltermcap"
- #OPENSTEP 4.2 for Sparc, m680x0, HP PA-RISC, and Intel.
- #Includes fullscreen file transfer display and TCP/IP.
- #ckcpro.c compiled without optimization because it crashes the compiler.
- openstep42:
- @echo Making C-Kermit $(CKVER) for OPENSTEP 4.2...
- $(MAKE) ckcpro.$(EXT) \
- "CFLAGS= -DOPENSTEP42 -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV \
- -DFNFLOAT -pipe -DCK_CURSES $(KFLAGS) -w"
- $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DOPENSTEP42 -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV \
- -DFNFLOAT -pipe -DCK_CURSES $(KFLAGS) -O -w" \
- "LIBS = -lsys_s -lcurses -ltermcap"
- #NeXT with malloc debugger
- nextmd:
- @echo Making C-Kermit $(CKVER) for NeXT with malloc debugging...
- $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
- -DCK_CURSES $(KFLAGS) -O -w -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG" \
- "LIBS = -lsys_s -lcurses -ltermcap"
- #Build for NeXTSTEP with "fat" binaries (MABs) that run on both Motorola
- #and Intel platforms.
- nextfat:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) \
- next KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-Wall -arch m68k -arch i386" "LNKFLAGS = -arch m68k -arch i386"
- #NeXTSTEP on Intel Platforms.
- next486:
- @echo Making C-Kermit $(CKVER) for NeXTSTEP on Intel Platforms...
- @echo 'If you get errors in ckutio.c about w_S, w_T, etc,'
- @echo 'add KFGLAGS=D-DNOREDIRECT to your make command.'
- $(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
- -DNODEBUG -O3 -fno-omit-frame-pointer -fschedule-insns2 -pipe \
- -DCK_CURSES $(KFLAGS) -w" "LIBS = -lsys_s -lcurses -ltermcap"
- #Single binary that runs on NeXT 68030 and 68040, Intel, HP, and Sparc,
- #as well as on OpenStep/Mach.
- nextquadfat:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) next \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-Wall -arch m68k -arch i386 -arch hppa -arch sparc" \
- "LNKFLAGS = -arch m68k -arch i386 -arch hppa -arch sparc"
- #BeBox
- beboxdr7:
- @echo 'Making C-Kermit $(CKVER) for the BeBox...'
- @echo 'Link step will fail with default Metroworks linker 64K limit.'
- @echo 'Code Warrior Gold required to link big programs.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CC=/boot/develop/tools/mwcc" "CC2=/boot/develop/tools/mwld" \
- "CFLAGS= -DBEBOX -DBE_DR_7 -DPOSIX -DNOUUCP -DNOLEARN $(KFLAGS) -O"
- #BeBox BeOS DR7 only
- bebox:
- @echo 'Making C-Kermit $(CKVER) for BeBox...'
- @echo 'Link step will fail with default Metroworks linker 64K limit.'
- @echo 'Code Warrior Pro 3.0 for BeBox required to link big programs.'
- $(MAKE) wermit "CC=mwcc" "CC2=mwld" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBEBOX -DPOSIX -DNOLEARN -DNOUUCP $(KFLAGS) -O"
- #BeOS 4.5
- #We have to use the wermit target because 'fd_set' is unknown.
- beos45:
- $(MAKE) wermit "CC=$(CC)" "CC2=$(CC2)" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBEOS -DBEOS45 -DPOSIX -DNOIKSD -DNOREALPATH -DSYSTIMEH \
- -DNOCOTFMC -DNOUUCP -DNOLEARN $(KFLAGS) -O" \
- "LIBS = $(LIBS)"
- #BeOS 4.5
- beos45net:
- $(MAKE) CC=$(CC) CC2=$(CC2) beos45 \
- "KFLAGS=-DTCPSOCKET -DNO_DNS_SRV $(KFLAGS)" "LIBS=-lnet -lnetapi"
- #Plan 9 from Bell Labs
- plan9:
- @echo 'C-Kermit for Plan 9 from Bell Labs - calling ckpker.mk...'
- make -f ckpker.mk
- #POSIX
- posix:
- @echo 'Making C-Kermit $(CKVER) for pure POSIX...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DNOUUCP -DNOLEARN $(KFLAGS) -O"
- # PowerMAX OS (SVR4) from Concurrent (tested on PowerMAX 5.1)
- powermax:
- @echo 'Making C-Kermit $(CKVER) for Concurrent PowerMAX OS...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DPOWERMAX \
- -DNETPTY -DHAVE_STREAMS -DHAVE_GRANTPT -DHAVE_PTSNAME -DPUSH_PTEM \
- -DPUSH_LDTERM -DPUSH_TTCOMPAT \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lresolv -lcurses -lgen -lc -lucbc"
- #Berkeley Software Design Inc. BSDI
- # Substitute "LIBS= -lnewcurses -ltermcap" if desired.
- bsdi:
- @echo 'Making C-Kermit $(CKVER) for BSDI ...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD44 -DSETREUID -DSW_ACC_ID -DBIGBUFOK -DFIXCRTSCTS \
- -DTCPSOCKET -DCK_CURSES -DFNFLOAT $(KFLAGS) -O" \
- "LIBS= -lcurses -ltermcap -lm"
- #Berkeley Software Design Inc. BSDI - has higher serial speeds than 1.x.
- bsdi2:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DBSDI2 $(KFLAGS)"
- bsdi3:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DBSDI2 -DBSDI3 $(KFLAGS)"
- bsdi4:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DBSDI2 -DBSDI3 -DBSDI4 -DTPUTSFNTYPE=void -DTPUTSISVOID \
- -DCKHTTP -m486 $(KFLAGS)"
- # (old name for the above)
- bsdiposix:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi
- #Build a BSDI 4.x binary that also runs under FreeBSD (Terry Kennedy).
- #But watch out for details like serial-port locking.
- bsdix:
- $(MAKE) "MAKE=$(MAKE)" CC=$(CC) CC2=$(CC2) bsdi \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DBSDI2 -DBSDI3 -DBSDI4 -DTPUTSFNTYPE=void -DTPUTSISVOID \
- -m486 $(KFLAGS)" "LNKFLAGS=-static -Wl,-m,i386bsdi -Wl,-e,_start"
- #Pyramid 9XXX (e.g. 9845) or MIServer T series, OSx 4.4b thru 5.1
- pyramid:
- @echo Making C-Kermit $(CKVER) for Pyramid Dual Port OSx
- ucb $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD43 -DTCPSOCKET -DPYRAMID -O $(KFLAGS)" "LNKFLAGS = -s"
- #Pyramid Dual Port OSx using HoneyDanBer UUCP, curses and TCP
- pyramid-hdb:
- @echo Making C-Kermit $(CKVER) for Pyramid Dual Port OSx
- ucb $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DBSD43 -DTCPSOCKET -DHBDUUCP -DCK_CURSES -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lcurses -ltermcap"
- #Pyramid DC/OSx (UNIX System V R4).
- #Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
- #are not misplaced in sys (rather than netinet and arpa, respectively).
- #Uses ANSI C.
- #NOTE: Remove -O and Olimit:2500 from CFLAGS if TELNET connections do not work.
- pyrdcosx:
- @echo 'Making C-Kermit $(CKVER) for Pyramid DC/OSx...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -Xa -O -DSVR4 -DDIRENT -DHDBUUCP -DSELECT -DNOGETUSERSHELL \
- -DCK_CURSES -DSTERMIOX -DTCPSOCKET -DPYRAMID -K Olimit:3100 \
- -DNO_DNS_SRV $(KFLAGS)" "LIBS= -lcurses -lsocket -lnsl" "LNKFLAGS = -s"
- #IBM's AIX 3.0 on IBM 370 mainframe, tested on AIX F44 thru F50.
- aix370:
- @echo Making C-Kermit $(CKVER) for IBM System/370 AIX 3.0...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIX370 -DTCPSOCKET -DLCKDIR -DDIRENT $(KFLAGS)" \
- "LIBS = -lbsd"
- #IBM's AIX/ESA 2.1 (OSF/1) on IBM mainframe
- aixesa:
- @echo Making C-Kermit $(CKVER) for IBM AIX/ESA...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXESA -DTCPSOCKET $(KFLAGS) -O"
- #IBM PS/2 with AIX 1.0 thru 1.3.
- # Reports indicate that -O switch must be omitted.
- # It is also possible that "make bsd" will work (reports welcome).
- # One report said "make LIBS=-lbsd bsd" did the trick.
- # NOTLOG is to get around a 'tlog' symbol defined in one of the headers.
- ps2aix:
- @echo 'Making C-Kermit $(CKVER) for IBM AIX 1.x PS/2...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOREALPATH -DPS2AIX10 -DSIG_V \
- -DNOUNICODE -DNOTLOG -DNOLEARN $(KFLAGS) -i" \
- "LNKFLAGS = -i"
- ps2aixnetc:
- @echo 'Making C-Kermit $(CKVER) for IBM AIX 1.x PS/2...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOREALPATH -DPS2AIX10 -DTCPSOCKET -DCK_CURSES \
- -DSIG_V -DNOUNICODE -DNOTLOG -DNOLEARN $(KFLAGS) -i" \
- "LIBS = -lcurses" "LNKFLAGS = -i"
- ps2aix3:
- $(MAKE) ps2aix KTARGET=$${KTARGET:-$(@)}
- #IBM RT PC with AIX 2.2.1, valid as of C-Kermit 8.0.
- #NOTLOG because of a conflict in <sys/termio.h>.
- #This one has unique and strange lockfiles.
- # -O removed on purpose (8.0).
- # In case of "compiler error: symbol table full", increase the -Nn number.
- # In case of "compiler error: Constant pool too big", boost the -Np number.
- # Add -DNOPUTENV if putenv() causes trouble.
- # Put -DNOIKSD back if IKSD-related problems occur.
- rtaix:
- @echo 'Making C-Kermit $(CKVER) for IBM RT PC, AIX 2.2.1...'
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS = -DATTSV -DRTAIX -DHDBUUCP -DDIRENT -DNOTLOG -DTCPSOCKET \
- -DNOGETUSERSHELL -DCLSOPN -DNOREALPATH -DNOUNICODE -DBSD_INCLUDES \
- -DUSE_LSTAT -DFNFLOAT -Nn2500 -Np1000 -Wq,-SJ2 -a -w $(KFLAGS)" \
- "LIBS = -lm $(LIBS)" "LNKFLAGS = -s"
- #### IBM RT PC - these targets were last verified in C-Kermit 8.0.211.
- #IBM RT PC with AIX 2.2.1 + curses
- rtaixc:
- $(MAKE) rtaix CC=$(CC) CC2=$(CC2) "KFLAGS=-DCK_CURSES" "LIBS=-lcurses"
- #IBM RT PC with AIX (ACIS) 2.2.1 (BSD 4.3)
- # Add -O, -DDYNAMIC, -s, etc, if they work.
- rtacis:
- @echo Making C-Kermit $(CKVER) for RT PC with ACIS 2.2.1 = BSD 4.3...
- $(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DNOREALPATH -DNOIKSD -DNOPUTENV \
- $(KFLAGS) -U__STDC__" "LNKFLAGS = -s"
- #### IBM AIX. The first two targets should work for any version of AIX
- #### from 4.2 onwards. The ones after that are for older versions or
- #### specific configurations, and/or with gcc.
- # This one should work for any AIX 4.2 or later: "make aix".
- # Other tags are for compatibility with old makefile targets.
- #OK: 2011/06/11
- aix aix42 aix43 aix44 aix45 aix50 aix51 aix52 aix53 aix54 aix61:
- @echo Making C-Kermit $(CKVER) for IBM AIX...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DAIX42 -DSVR4 -DSTERMIOX -DTCPSOCKET \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DFNFLOAT \
- -DSELECT -DSELECT_H -DNOGETUSERSHELL -qmaxmem=16000 -O \
- -DCKCPU=\\\"`uname -p`\\\" \
- -DHERALD=\"\\\" IBM AIX `uname -v`.`uname -r`\\\"\" \
- -D_LARGE_FILES $(KFLAGS)" "LNKFLAGS = -s" "LIBS=-lcurses -lm"
- # Same but using gcc instead of cc
- # This works but we get "gcc: unrecognized option '-qmaxmem-..'" each module.
- aixg:
- @echo "Using gcc..."
- $(MAKE) aix KTARGET=$${KTARGET:-$(@)} \
- CC=gcc CC2=gcc "KFLAGS=-pipe -funsigned-char"
- # AIX 4.2 or later with OpenSSL 0.9.7 or later: "make aix+ssl"
- # For earlier OpenSSL remove -DOPENSSL_097 or add "KFLAGS=-UOPENSSL_097".
- # Synonym target names added to cover old redundant targets that were removed.
- # If SSL is not installed in the /usr/local tree (see SSLINC and SSLLIB
- # definitions near the top), you can specify the locations in your make
- # command as in this example:
- #
- # SSLINC=-I/opt/ssl/include SSLLIB=-L/opt/ssl/lib make -e aix+ssl
- #
- # To build with gcc use "make aix CC=gcc CC2=gcc", or "make aixg"
- #
- #OK: 2011/06/15
- aix+ssl aix51+openssl aix52+openssl aix53+openssl:
- @echo "Making C-Kermit $(CKVER) for IBM AIX with OpenSSL..."
- @echo "SSLINC=$(SSLINC) SSLLIB=$(SSLLIB)"
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- CC=$(CC) CC2=$(CC2) \
- "CFLAGS=-DAIXRS -DAIX41 -DAIX42 -DSVR4 -DSTERMIOX -DTCPSOCKET \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DFNFLOAT \
- -D_LARGE_FILES -DSELECT -DSELECT_H -DNOGETUSERSHELL \
- -DCKCPU=\\\"`uname -p`\\\" \
- -DHERALD=\"\\\" IBM AIX `uname -v`.`uname -r`\\\"\" \
- -DCK_AUTHENTICATION -DCK_SSL -DOPENSSL_097 $(SSLINC) $(KFLAGS)" \
- "LNKFLAGS=-s" "LIBS=$(SSLLIB) -lssl -lcrypto -lcurses -lm -lcrypt"
- # AIX 5.3 or 6.1 or later with IBM OpenSSL, which is always in the directories
- # shown below so you don't have to set SSLINC and SSLLIB. If for some reason
- # the SSL include files and libraries are not in the places assumed, then use
- # "make aix+ssl" (just above) and set SSLINC and SSLLIB to indicate where the
- # SSL files are. To build with gcc use "make aix+ibmssl CC=gcc CC2=gcc".
- aix+ibmssl:
- @echo "Making C-Kermit $(CKVER) for IBM AIX 6.1 with OpenSSL..."
- @echo "If this fails use 'make aix+ss' and specify SSLINC and SSLLIB"
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- CC=$(CC) CC2=$(CC2) \
- "CFLAGS=-DAIXRS -DAIX41 -DAIX42 -DSVR4 -DSTERMIOX -DTCPSOCKET \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DFNFLOAT \
- -D_LARGE_FILES -DSELECT -DSELECT_H -DNOGETUSERSHELL \
- -DCKCPU=\\\"`uname -p`\\\" \
- -DHERALD=\"\\\" IBM AIX `uname -v`.`uname -r`\\\"\" \
- -DCK_AUTHENTICATION -DCK_SSL -DOPENSSL_098 \
- -I/usr/include/openssl $(KFLAGS)" \
- "LNKFLAGS=-s" \
- "LIBS=-L/usr/lib/openssl -lssl -lcrypto -lcurses -lm -lcrypt"
- # Old AIX versions...
- #IBM AIX 3.0, 3.1, or 3.2 for RISC System/6000.
- rs6000:
- @echo Making C-Kermit $(CKVER) for IBM AIX 3.0 or 3.1, RS/6000...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR3 -DDIRENT -DCK_ANSIC \
- -DCK_POLL -DCLSOPN -DSELECT_H -DNOTTYLOCK -O $(KFLAGS)" \
- "LNKFLAGS = -s"
- #IBM AIX 3.0, 3.1, or 3.2 for RISC System/6000, with curses.
- rs6000c:
- @echo Making C-Kermit $(CKVER) for IBM AIX 3.0 or 3.1, RS/6000...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR3 -DDIRENT -DCK_ANSIC \
- -DCK_POLL -DCLSOPN -DCK_CURSES -DSELECT_H -DNOTTYLOCK -DNOREALPATH \
- -O $(KFLAGS)" "LIBS= -lcurses -ltermcap" "LNKFLAGS = -s"
- aix30:
- $(MAKE) rs6000 CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)}
- aix31:
- $(MAKE) rs6000 CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)}
- #IBM AIX 3.2 for RISC System/6000.
- #In case of "subprogram too complex" warnings, add "-qmaxmem=16000" to CFLAGS.
- rs6aix32:
- @echo Making C-Kermit $(CKVER) for IBM AIX 3.2, RS/6000...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR4 -DDIRENT -DCK_ANSIC -DNOREALPATH \
- -DSELECT_H -DCLSOPN -DNOTTYLOCK -O $(KFLAGS)" "LNKFLAGS = -s"
- #IBM AIX 3.2 for RISC System/6000.
- rs6aix32c:
- @echo Making C-Kermit $(CKVER) for IBM AIX 3.2, RS/6000, TCP+curses...
- @echo In case of Subprogram Too Complex warnings,
- @echo add -qmaxmem=16000 to CFLAGS.
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DTCPSOCKET -DSVR4 -DDIRENT -DCK_ANSIC -DNOREALPATH \
- -DCLSOPN -DCK_CURSES -DSELECT_H -DNOTTYLOCK -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS=-lcurses"
- aix32:
- $(MAKE) rs6aix32c KTARGET=$${KTARGET:-$(@)}
- #IBM AIX 4.1, 4.1.x on RISC System/6000 or Power Series.
- #Generates common binary for all platforms if using xlc (IBM C compiler).
- #When using gcc, add -mcpu=common to generate common binary.
- #Note that this one needs CK_NEWTERM.
- # Add -bbigtoc in case ld fails with TOC overflow.
- aix41:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
- -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -qmaxmem=16000 -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS=-lcurses"
- #Ditto but with gcc.
- #Remove "CC=gcc CC2=gcc" if you have gcc installed as cc.
- aix41g:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC=gcc" "CC2=gcc" \
- "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
- -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -O $(KFLAGS)" \
- "LNKFLAGS = -s -Xlinker -bbigtoc" "LIBS=-lcurses"
- # Add -bbigtoc in case ld fails with TOC overflow.
- aix41+krb5+krb4:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
- -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_DES $(K5INC) $(K5INC)/krb5 \
- -DNOGETUSERSHELL -qmaxmem=16000 -O $(KFLAGS)" \
- "LNKFLAGS = -s" \
- "LIBS = $(K5LIB) -lcurses -lkrb4 -ldes425 -lkrb5 \
- -lcom_err -lk5crypto -lgssapi_krb5"
- #Old name for "aix41".
- rs6aix41c:
- $(MAKE) aix41 KTARGET=$${KTARGET:-$(@)}
- #IBM AIX 4.1, 4.1.x, or 4.2 on RISC System/6000 or Power Series,
- # with X.25 support
- #Generates common binary for all platforms if using xlc (IBM C compiler).
- #When using gcc, add -mcpu=common to generate common binary.
- # Add -bbigtoc in case ld fails with TOC overflow.
- aix41x25:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
- -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DIBMX25 -DDEBUG -DNOGETUSERSHELL -qmaxmem=16000 -g $(KFLAGS)" \
- "LNKFLAGS = -g -bI:/lib/pse.exp" "LIBS=-lcurses -lodm -lcfg"
- -@echo "]0;kermit done\c"
- #As above but without -g in LNKFLAGS.
- # Add -bbigtoc in case ld fails with TOC overflow.
- aix41x25o:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
- -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DIBMX25 -DNODEBUG -DNOGETUSERSHELL -qmaxmem=16000 $(KFLAGS)" \
- "LNKFLAGS = -bI:/lib/pse.exp" "LIBS=-lcurses -lodm -lcfg"
- -@echo "]0;kermit done\c"
- #AIX 4.2 -- Use this target if the regular "make aix" doesn't work.
- # Must have CK_NEWTERM or echoing is lost after curses.
- # Add -bbigtoc in case ld fails with TOC overflow. As of C-Kermit 8.0.212,
- # all AIX builds 4.2 and later include large file support.
- oldaix42:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.2 or higher...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DAIX42 -DSVR4 -DSTERMIOX -DTCPSOCKET \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DFNFLOAT \
- -DSELECT -DSELECT_H -DNOGETUSERSHELL -qmaxmem=16000 -O \
- -DCKCPU=\\\"`uname -p`\\\" \
- -DHERALD=\\\"\ IBM\ AIX\ `uname -v`.`uname -r`\\\" \
- -D_LARGE_FILES $(KFLAGS)" "LNKFLAGS = -s" "LIBS=-lcurses -lm"
- #AIX 4.3 - Use this target if the regular "make aix" doesn't work.
- # Must NOT have CK_NEWTERM or else C-Kermit hangs after curses.
- # -bbigtoc needed on some systems but not others to avoid TOC overflow.
- # "man ld" says -bbigtoc makes program run slower.
- oldaix43:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DAIX43 -DSVR4 -DSTERMIOX -DTCPSOCKET \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DFNFLOAT -DNOGETUSERSHELL -qmaxmem=16000 -bbigtoc -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS=-lcurses -lm"
- #AIX 4.3 with IBM X.25.
- aix43x25:
- @echo "Making C-Kermit $(CKVER) for IBM AIX 4.3 with X.25..."
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DAIXRS -DAIX41 -DAIX43 -DSVR4 -DSTERMIOX -DTCPSOCKET \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DFNFLOAT -DNOGETUSERSHELL -DIBMX25 \
- -qmaxmem=16000 -bbigtoc -O $(KFLAGS)" \
- "LNKFLAGS = -bI:/lib/pse.exp" "LIBS=-lcurses -lodm -lcfg -lm"
- #AIX 4.3 -- Must NOT have CK_NEWTERM or else C-Kermit hangs after curses.
- # -mminimal-toc needed on some systems but not others to avoid TOC overflow.
- # "man ld" says -bbigtoc makes program run slower.
- aix43g:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS=-lcurses -lm"
- aix43gcc:
- $(MAKE) aix43g
- # None of the following aix43gcc attempts work on a gcc-only AIX 4.3.3 box.
- # It just plain can't find the math routines (fmod, pow, exp, sqrt, log10,...)
- # Which is odd because nm /usr/lib/libC.a finds them...
- #in case aix43gcc can't find its math library...
- aix43gccx:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS= -L/usr/local/lib/gcc-lib/powerpc-ibm-aix4.3.1.0/2.95.2 \
- -lcurses -bloadmap -bnoquiet"
- #in case aix43gccx can't find its math library...
- aix43gccy:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS= -lcurses -bloadmap -bnoquiet"
- #in case aix43gccx can't find its math library...
- aix43gccz:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 gcc...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS= -L. -lcurses -bloadmap -bnoquiet"
- #AIX 4.3 with MIT Kerberos 5 and Kerberos 4 compatibility mode
- # Must NOT have CK_NEWTERM or else C-Kermit hangs after curses.
- # -mminimal-toc needed on some systems but not others to avoid TOC overflow.
- # "man ld" says -bbigtoc makes program run slower.
- aix43gcc+krb5+krb4:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher w/Kerberos...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_DES -funsigned-char $(K5INC) $(K5INC)/krb5 \
- $(KFLAGS)" \
- "LIBS=$(K5LIB) -lcurses -lm -lkrb4 -ldes425 -lkrb5 \
- -lcom_err -lk5crypto -lcrypt -lgssapi_krb5"
- #AIX 4.3 with MIT Kerberos 5, Kerberos 4 compatibility mode and OpenSSL
- # Must NOT have CK_NEWTERM or else C-Kermit hangs after curses.
- # -mminimal-toc needed on some systems but not others to avoid TOC overflow.
- # "man ld" says -bbigtoc makes program run slower.
- aix43gcc+krb5+krb4+openssl:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher w/Kerberos...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_DES -DCK_CAST -DLIBDES -DCK_SSL \
- -funsigned-char $(K5INC) $(K5INC)/krb5 $(SSLINC) $(KFLAGS)" \
- "LIBS=$(K5LIB) $(SSLLIB) -lssl -lcrypto \
- -lcurses -lm -lkrb4 -ldes425 -lkrb5 -lcom_err -lk5crypto -lcrypt \
- -lgssapi_krb5"
- aix43gcc+openssl:
- @echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher w/OpenSSL...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS= -mminimal-toc -g -O -DAIXRS -DAIX41 -DAIX43 -DSVR4 \
- -DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
- -DSTERMIOX -DTCPSOCKET -DFNFLOAT -DNOGETUSERSHELL \
- -DCK_AUTHENTICATION -DCK_SSL -funsigned-char $(SSLINC) $(KFLAGS)" \
- "LIBS=$(SSLLIB) -lssl -lcrypto -lcurses -lm -lcrypt"
- aix44gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX44 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
- aix45gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX45 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
- aix50gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX50 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
- aix51gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX51 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
- aix52gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX52 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
- aix53gcc:
- $(MAKE) aix43g "KFLAGS=-DAIX53 $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)}
- #Bull DPX/2 with BOS/X, like AIX/RS6000
- bulldpx2:
- @echo Making C-Kermit $(CKVER) for Bull DPX/2 with BOS/X...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DCK_ANSIC -DCKTYP_H=<sys/types.h> \
- -DCK_POLL -DNOGETUSERSHELL -DCLSOPN -DNOLEARN -O $(KFLAGS)" \
- "LNKFLAGS = -s"
- #Sun UNIX 3.5 with gcc 2.3.3.
- sunos3gcc:
- @echo Making C-Kermit $(CKVER) for Sun UNIX 3.5 and gcc...
- $(MAKE) xermit CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \
- CFLAGS="-g -O -DBSD4 -DTCPSOCKET $(KFLAGS)"
- #SunOS version 4.0, BSD environment, has saved original euid feature.
- # Add "CC=/usr/ucb/cc CC2=/usr/ucb/cc" if necessary.
- # Note: Including Unicode crashes the assembler in ckcuni.c.
- sunos4:
- @echo Making C-Kermit $(CKVER) for SunOS 4.0, BSD environment...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS4 -DFNFLOAT -DNOUNICODE $(KFLAGS)" \
- "LIBS=-lm"
- #As above, but with SunLink X.25 support
- sunos4x25:
- @echo SunLink X.25 support
- $(MAKE) "MAKE=$(MAKE)" sunos4 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DFNFLOAT -DSUNX25" \
- "LIBS=-lm"
- #SUN OS version 4.1 - 4.1.3, BSD environment, has saved original euid feature.
- #Uses Honey DanBer UUCP. Requires presence of /usr/spool/locks directory.
- # /var/spool/ should be a symbolic link to /usr/spool/.
- # ... or 'make xermit "CC= /usr/ucb/cc " \'
- # Note: "xermit" means use the select() version of the CONNECT module.
- # Note for C-Kermit 9.0: Reportedly 'you need to modify the sys/ioctl.h
- # include file, i.e. comment out the "struct winsize" and "struct
- # ttysize". Otherwise there will be a conflict with sys/ttycom.h (included by
- # termios.h) which also declares these structs. But you need both includes.'
- sunos41:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 / BSD...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE $(KFLAGS)" \
- "LIBS= $(LIBS) -lresolv -lm"
- #As above, but compiled with gcc. Gives 24-32K size reduction
- #with gcc 2.1 or 2.2.2. CAUTION: make sure "fixincludes" has been run on
- #the include files, so gcc's are in sync with the regular Sun ones.
- #This includes the curses library for fullscreen file transfer display.
- #NDGPWNAM needed for GCC 2.5.6, not needed for 2.4.0, but it's uncertain
- #whether it will do any harm for 2.4.0 compilation -- if so, remove it.
- sunos41gcc:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -funsigned-char $(KFLAGS)" "LIBS= -lcurses -ltermcap -lresolv -lm"
- # As above, but without -funsigned-char so I can see the warnings that
- # everybody else will get when they use ANSI compilers that don't have this
- # option (gsc = gcc signed char).
- sunos41gsc:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- $(KFLAGS)" "LIBS= -lcurses -ltermcap -lresolv -lm"
- #As above but with ckucon.c rather than ckucns.c (for testing only)
- sunos41gccfork:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DNOLEARN -funsigned-char $(KFLAGS)" \
- "LIBS= -lcurses -ltermcap -lresolv -lm"
- #as above but configured for Kerberos IV
- sunos41gcc+krb4:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, krb4...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DTCPSOCKET -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 \
- -DCK_ENCRYPTION -DCK_DES -DCK_CAST -DBIGBUFOK -funsigned-char \
- $(K4INC) $(KFLAGS)" \
- "LIBS= $(K4LIB) -lcurses -ltermcap -lresolv -lm -lkrb -ldes"
- #as above but configured for SSL/TLS
- sunos41gcc+openssl:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, ssl...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DCK_AUTHENTICATION -funsigned-char \
- -DCK_SSL -DTCPSOCKET -DBIGBUFOK $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -lcurses -ltermcap -lresolv -lm -lssl -lcrypto"
- #as above but configured for Kerberos IV and SSL/TLS
- sunos41gcc+krb4+openssl:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, krb4...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION -DCK_DES \
- -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \
- $(K4INC) $(SSLINC) $(KFLAGS)" \
- "LIBS= $(K4LIB) $(SSLLIB) \
- -lcurses -ltermcap -lresolv -lm -lkrb -lssl -lcrypto"
- #as above but configured for Kerberos IV and ZLIB enabled SSL/TLS
- sunos41gcc+krb4+openssl+zlib:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, krb4...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION -DCK_DES \
- -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \
- -DZLIB $(K4INC) $(SSLINC) \
- $(KFLAGS)" \
- "LIBS= $(K4LIB) $(SSLLIB) \
- -lcurses -ltermcap -lresolv -lm -lkrb -lssl -lcrypto -lz"
- #as above but configured for Kerberos IV and SRP and ZLIB enabled SSL/TLS
- sunos41gcc+krb4+srp+openssl+zlib:
- @echo "C-Kermit $(CKVER) SunOS 4.1: gcc,curses,krb4,srp,ssl,zlib..."
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION -DCK_DES \
- -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \
- -DZLIB -DCK_SRP $(K4INC) $(SRPINC) $(SSLINC) $(KFLAGS)" \
- "LIBS= $(K4LIB) $(SRPLIB) $(SSLLIB) \
- -lcurses -ltermcap -lresolv -lm -lkrb -lkrypto \
- -lsrp -lssl -lcrypto -lz"
- #as above but configured for Kerberos IV and SRP and ZLIB enabled SSL/TLS
- sunos41gcc+srp+openssl+zlib:
- @echo "C-Kermit $(CKVER) SunOS 4.1: gcc,curses,srp,ssl,zlib..."
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
- -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_DES \
- -DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \
- -DZLIB -DCK_SRP $(SRPINC) $(SSLINC) \
- $(KFLAGS)" \
- "LIBS= $(SRPLIB) $(SSLLIB) \
- -lcurses -ltermcap -lresolv -lm -lkrypto -lsrp -lssl -lcrypto -lz "
- #SUNOS 4.1 as sunos41 above, but also with curses support
- sunos41c:
- @echo Curses support
- $(MAKE) "MAKE=$(MAKE)" sunos41 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DCK_CURSES -DFNFLOAT " \
- "LIBS= -lcurses -ltermcap"
- #As SunOS 4.1.x, gcc, configured as Internet Kermit Server.
- # . NOLOCAL removes capability to make connections
- # . TNCODE allows server-side Telnet negotiation.
- # . used to include -lpwent, why?
- # . used to include -L/usr/local/lib -lm, why?
- sunos41giks:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc for IKS...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
- "CFLAGS= -O -DSUNOS41 -DNDGPWNAM -DFNFLOAT \
- -DNOLOCAL -DTCPSOCKET -DTNCODE -DNOPUSH $(KFLAGS)" \
- "LIBS= -lm -lresolv"
- #SUNOS 4.1 with SunLink X.25 support
- sunos41x25:
- @echo SunLink X.25 support
- $(MAKE) "MAKE=$(MAKE)" wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE -DFNFLOAT -DSUNX25 \
- -DNOLEARN $(KFLAGS)" "LIBS= $(LIBS) -lresolv -lm"
- #SUNOS 4.1 with SunLink X.25 support and curses
- sunos41x25c:
- @echo SunLink X.25 support + curses
- $(MAKE) "MAKE=$(MAKE)" wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE -DFNFLOAT -DSUNX25 \
- -DCK_CURSES -DNOLEARN $(KFLAGS)" \
- "LIBS= $(LIBS) -lcurses -ltermcap -lresolv -lm"
- #SUN with Solaris 2.0 = SunOS 5.0.
- #Mostly the same as System V R4. Don't use this with later Solaris versions.
- solaris20:
- @echo 'Making C-Kermit $(CKVER) for Sun with Solaris 2.0 and curses...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DTCPSOCKET -DCK_CURSES -DFNFLOAT -DCK_POLL $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermlib -lm" "LNKFLAGS = -s"
- #SUN with Solaris 2.0.
- #As above, but built with the gcc compiler from the Cygnus CD-ROM.
- solaris20g:
- @echo 'Making C-Kermit $(CKVER) for Sun Solaris 2.0, gcc, and curses..'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DTCPSOCKET -DCK_CURSES -DCK_POLL -DFNFLOAT $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermlib -lm" "LNKFLAGS = -s" \
- CC=/opt/cygnus-sol2-1.1/bin/gcc CC2=/opt/cygnus-sol2-1.1/bin/gcc
- #SunOS 5.1 = Solaris 2.1.
- #NOTE: A C compiler is no longer bundled with SunOS 5.1, so to compile C
- #programs, you might have to change your PATH to include the directory
- #/usr/ccs/bin AFTER the directory containing the compiler. SunPRO C is
- #installed by default in /opt/SUNWspro/bin. So a sample PATH might be:
- #
- # /usr/local/bin:/usr/bin:/opt/SUNWspro/bin:/usr/ccs/bin:\
- # /usr/ucb:/usr/sbin:/sbin:.
- #
- # or:
- #
- # /usr/openwin/bin:/export/home/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin.
- #
- #NOTE 2: Compilation with the Apogee C compiler (apcc) might not work,
- #because it refuses to allow "-Usun". Reportedly, newer releases of apcc
- #(such as 1.2.17) work OK, use: "make -e sunos51 CC=apcc CC2=apcc".
- solaris21:
- @echo 'Making C-Kermit $(CKVER) for SunOS 5.x....'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -Usun -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DFNFLOAT \
- -DSELECT -DNODEBUG -DSTERMIOX $(KFLAGS)" "LIBS = -lm" "LNKFLAGS = -s"
- #Solaris 2.0 - 2.4, SunPro compiler, includes curses and TCP/IP.
- #When using SUNWspro CC 2.0.1 under Solaris 2.3, be sure all cc patches
- #are applied, otherwise corrupt or truncated object files can result.
- #To build, set your PATH as follows:
- # /usr/local/bin:/usr/bin:/opt/SUNWspro/bin:/usr/ccs/bin:\
- # /usr/ucb:/usr/sbin:/sbin:.
- # or (depending on where the compiler has been installed):
- # /usr/openwin/bin:/export/home/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin.
- #For additional optimization try using "-fast -xO4 -xdepend".
- solaris2x:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with SunPro cc...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -Usun -i -DSVR4 -DDIRENT -DSOLARIS -DHDBUUCP -DFNFLOAT \
- -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv"
- #as above but configured for Kerberos IV
- solaris2x+krb4:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x, SunPro cc, krb4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -Usun -i -DSVR4 -DDIRENT -DSOLARIS -DHDBUUCP -DFNFLOAT \
- -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 \
- -DCK_ENCRYPTION -DCK_DES -DCK_CAST $(K4INC) $(KFLAGS)" \
- "LNKFLAGS = -s" \
- "LIBS= $(K4LIB) -ltermlib -lsocket -lnsl -lm -lresolv -lkrb -ldes"
- #C-Kermit for Solaris 2.0-2.4 compiled with gcc, includes curses and TCP/IP.
- #Change -O2 to -O if -O2 gives trouble.
- #Remove -Usun if it causes trouble.
- #Your PATH should start with something like:
- # /usr/local/gnu/bin:/usr/ccs/bin:
- #Produces a huge executable -- strip with /usr/ccs/bin/strip (not Gnu strip).
- #Also don't add "LNKFLAGS = -s" -- strip manually instead.
- #Also note: this can NOT be linked statically - Sun makes it impossible.
- #And for Solaris 2.4, you might have to replace:
- # /usr/local/lib/gcc-lib/i486-sun-solaris2/2.4.5/include/sys/stat.h
- #with /usr/include/sys/stat.h.
- solaris2xg:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with GNU cc...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv $(LIBS)"
- #ditto but no curses.
- solaris2xgnc:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with GNU cc...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lm -lresolv $(LIBS)"
- #and with Kerberos IV
- solaris2xg+krb4:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with GNU cc, krb4...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION \
- -DCK_DES -DCK_CAST -DBIGBUFOK $(K4INC) $(KFLAGS)" \
- "LIBS= $(K4LIB) -ltermlib -lsocket -lnsl -lm -lresolv -lkrb -ldes \
- $(LIBS)"
- #and with OpenSSL,ZLIB,PAM,SHADOW
- solaris2xg+openssl+zlib+pam+shadow:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DCK_SHADOW -DZLIB \
- -DBIGBUFOK $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -ltermlib \
- -lsocket -lnsl -lm -lresolv -lssl -lcrypto -lpam -lz"
- #Ditto but with GCC 3.1 in which you have to specify 32-bit with -m32.
- #In Solaris 9 (and maybe 8) you'll also need specifiy the Library path.
- #Reportedly this can be done here, but only with:
- # crle -l /usr/lib:/usr/local/ssl/lib
- #prior to building. Note: 64-bit not tested with SSL.
- #For no-crypto 64-bit builds see the solaris9g64 target.
- solaris2xg32+openssl+zlib+pam+shadow:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC="gcc -m32" CC2="gcc -m32" \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DCK_SHADOW -DZLIB \
- -DBIGBUFOK $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -ltermlib \
- -lsocket -lnsl -lm -lresolv -lssl -lcrypto -lpam -lz"
- #and with Krb5,Krb4,OpenSSL,SHADOW
- solaris2xg+krb5+krb4+openssl+shadow:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc,k5,k4,ssl...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_SSL -DCK_DES -DCK_CAST -DBIGBUFOK \
- $(K5INC) $(K5INC)/krb5 $(SSLINC) $(KFLAGS)" \
- "LIBS= $(K5LIB) $(SSLLIB) -ltermlib -lsocket -lnsl -lm -lresolv \
- -lkrb4 -lssl -lcrypto -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto \
- -ldes $(LIBS)"
- #and with OpenSSL
- solaris2xg+openssl+pam+shadow:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DCK_SHADOW \
- -DBIGBUFOK $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -ltermlib \
- -lsocket -lnsl -lm -lresolv -lssl -lcrypto -lpam"
- solaris2xg+openssl+zlib+srp+pam+shadow:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with gcc, OpenSSL...'
- @echo 'Please read the comments that accompany the solaris2xg target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET -DBIGBUFOK \
- -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_DES -DLIBDES -DCK_CAST \
- -DCK_SSL -DCK_PAM -DCK_SHADOW -DZLIB -DCK_SRP $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -ltermlib -lsocket -lnsl -lm -lresolv -lsrp -lssl \
- -ldes -lkrypto -lcrypto -lpam -lz"
- solaris22g:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DPOSIX_CRTSCTS $(KFLAGS)" solaris2xg \
- KTARGET=$${KTARGET:-$(@)}
- solaris23g:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DPOSIX_CRTSCTS $(KFLAGS)" solaris2xg \
- KTARGET=$${KTARGET:-$(@)}
- #Solaris 2.4 built with gcc
- solaris24g:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} \
- solaris2xg "KFLAGS=-DSOLARIS24 -DPOSIX_CRTSCTS $(KFLAGS)"
- #Solaris 2.0-2.3, SunPro compiler, with SunLink X.25 support.
- #This will only run if user has /opt/SUNWconn/lib/libsockx25.so.1
- #exists and can be dynamically linked.
- #NOTE: Do not change target to xermit -- it doesn't support X.25.
- solaris2x25:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x+X.25 with SunPro cc...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS -DDIRENT \
- -DSUNX25 -DTCPSOCKET -DHDBUUCP -DFNFLOAT -DNOLEARN \
- -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX $(KFLAGS)" \
- "LNKFLAGS = -s" \
- "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
- -lsockx25 -lsocket -lnsl -lm -lresolv"
- #Solaris 2.0-2.4, gcc, SunLink X.25 added.
- #NOTE: Can't use xermit target with X.25.
- solaris2xgx25:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x + X.25 with GNU cc...'
- @echo 'Please read the comments that accompany the solaris2xg entry.'
- $(MAKE) wermit CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DSUNX25 \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET -DFNFLOAT \
- -DNOLEARN $(KFLAGS)" \
- "LIBS= -ltermlib -lm -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
- -lsockx25 -lsocket -lnsl"
- #Solaris 2.4, SunPro compiler, with SunLink X.25 support.
- #This will only run if user has /opt/SUNWconn/lib/libsockx25.so.1
- #exists and can be dynamically linked.
- solaris24x25:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.4+X.25 with SunPro cc...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS -DSOLARIS24 -DDIRENT -DNOLEARN \
- -DSUNX25 -DTCPSOCKET -DHDBUUCP -DFNFLOAT -DPOSIX_CRTSCTS \
- -DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX $(KFLAGS)" \
- "LNKFLAGS = -s" \
- "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
- -lsockx25 -lsocket -lnsl -lm -lresolv"
- #Solaris 2.5, SunPro compiler, with SunLink X.25 support.
- solaris25x25:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.5+X.25 with SunPro cc...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS25 -DDIRENT -DSUNX25 \
- -DTCPSOCKET -DHDBUUCP -DSELECT -DCK_CURSES \
- -DCK_NEWTERM -DSTERMIOX -DFNFLOAT -DPOSIX_CRTSCTS -DNOLEARN \
- -I/opt/SUNWconn/include $(KFLAGS)" \
- "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
- -lsockx25 -lsocket -lnsl -lm -lresolv"
- solaris23:
- $(MAKE) "MAKE=$(MAKE)" solaris2x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS)"
- solaris24:
- $(MAKE) "MAKE=$(MAKE)" solaris2x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS24 -DPOSIX_CRTSCTS $(KFLAGS)"
- # template for Solaris 2.5 and above.
- solaris25x:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.x with SunPro cc...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DFNFLOAT -O -Usun -i $(KFLAGS)" \
- "LNKFLAGS = -s" \
- "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv $(LIBS)"
- #Solaris 2.5, SunPro compiler, curses, TCP/IP
- solaris25:
- $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS25 $(KFLAGS)"
- #Solaris 2.5, SunPro compiler, curses, TCP/IP, Kerberos IV
- solaris25+krb4:
- $(MAKE) "MAKE=$(MAKE)" solaris25x+krb4 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS25 $(KFLAGS)"
- #Solaris 2.5 built with gcc
- solaris25g:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-funsigned-char -DSOLARIS25 $(KFLAGS)"
- #Solaris 2.5 built with gcc and Kerberos IV
- solaris25g+krb4:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb4 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-funsigned-char -DSOLARIS25 $(KFLAGS)"
- #Solaris 2.5 built with gcc and Kerberos V/IV, SSL, ...
- solaris25g+krb5+krb4+openssl+shadow:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb5+krb4+openssl+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-funsigned-char -DSOLARIS25 $(KFLAGS)"
- #Solaris 2.5, gcc, SunLink X.25 added.
- solaris25gx25:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xgx25 \
- "KFLAGS=-DSOLARIS25 $(KFLAGS)"
- #Solaris 2.6, gcc, SunLink X.25 added.
- solaris26gx25:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xgx25 \
- "KFLAGS=-DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
- #Solaris 2.6, SunPro compiler, curses, TCP/IP
- solaris26:
- $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
- #Solaris 2.6 with gcc
- solaris26g:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xg \
- "KFLAGS= -DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS = -lpam"
- #Solaris 2.6 with gcc and SSL
- solaris26g+openssl:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS= -DSOLARIS26 $(KFLAGS)"
- #Solaris 2.6 with gcc, no curses (e.g. because libtermlib is missing).
- solaris26gnc:
- $(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xgnc \
- "KFLAGS= -DSOLARIS26 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
- #Solaris 2.6, SunPro compiler, with SunLink X.25 support.
- solaris26x25:
- @echo 'Making C-Kermit $(CKVER) for Solaris 2.6+X.25 with SunPro cc...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS26 -DDIRENT -DSUNX25 \
- -DTCPSOCKET -DHDBUUCP -DSELECT -DCK_CURSES -DCK_PAM -DCK_SHADOW \
- -DCK_NEWTERM -DSTERMIOX -DFNFLOAT -DPOSIX_CRTSCTS -DNOLEARN \
- -I/opt/SUNWconn/include $(KFLAGS)" \
- "LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
- -lsockx25 -lsocket -lnsl -lm -lresolv -lpam"
- #Solaris 7 (2.7) with Sun CC
- solaris7:
- $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
- #Solaris 7 with gcc (32-bit)
- solaris7g:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
- #Solaris 7 with gcc + Kerberos IV (32-bit)
- solaris7g+krb4:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb4 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
- solaris7g+openssl+zlib+pam+shadow:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)"
- #Solaris 7 with gcc + OpenSSL (32-bit)
- solaris7g+openssl+zlib+srp+pam+shadow:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+srp+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS7 -DCK_PAM -DCK_SHADOW $(KFLAGS)"
- #Solaris 8
- solaris8:
- $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS8 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
- #Solaris 8 with gcc (32-bit)
- solaris8g:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS8 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
- # In OpenSSL builds add -ldl if you get unresolved references for
- # dlclose, dlsym, dlopen, dlerror.
- #Solaris 8 with gcc + OpenSSL (32-bit)
- solaris8g+openssl+zlib+pam+shadow:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DSOLARIS8 $(KFLAGS)"
- #Solaris 8 with gcc + Kerberos IV (32-bit)
- solaris8g+krb4:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb4 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS8 -DCK_PAM -DCK_SHADOW $(KFLAGS)" \
- "LIBS= -lpam"
- solaris9nolfs:
- $(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS9 -DCK_PAM -DCK_SHADOW -DUSE_STRERROR $(KFLAGS)" \
- "LIBS= -lpam"
- #Solaris 9 with malloc debugging
- solaris9md:
- $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DFNFLOAT -O -Usun -i -D_FILE_OFFSET_BITS=64 \
- -DSOLARIS9 -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG \
- -DCK_PAM -DCK_SHADOW -DUSE_STRERROR $(KFLAGS)" \
- "LIBS= -lpam -ltermlib -lsocket -lnsl -lm -lresolv"
- #Solaris 9 with gcc + OpenSSL + Shadow (32-bit)
- #Add -DOPENSSL_097 for OpenSSL 0.9.7 or later.
- solaris9g+openssl+shadow+pam+zlib:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+openssl+zlib+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS9 -DHDBUUCP -DDIRENT -D_FILE_OFFSET_BITS=64 \
- -DNO_DCL_INET_ATON -DZLIB -DCK_PAM -DCK_SHADOW -DLIBDES $(KFLAGS)" \
- "LIBS= -lpam -ldes425 -lz $(LIBS)"
- #Solaris 9 with gcc + OpenSSL + Kerberos 5 + Krb4 + Shadow (32-bit)
- #Add -DOPENSSL_097 for OpenSSL 0.9.7 or later.
- solaris9g+krb5+krb4+openssl+shadow+pam+zlib:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg+krb5+krb4+openssl+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS9 -DHDBUUCP -DDIRENT -D_FILE_OFFSET_BITS=64 \
- -DNO_DCL_INET_ATON -DZLIB -DCK_PAM -DCK_SHADOW -DLIBDES $(KFLAGS)" \
- "LIBS= -lpam -ldes -lz $(LIBS)"
- #Solaris 9 with gcc + Kerberos 4 and 5:
- solaris9g+krb5+krb4:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -O -Usun -DSVR4 -DSOLARIS9 -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -D_FILE_OFFSET_BITS=64 \
- -DCK_ENCRYPTION -DCK_DES -DCK_CAST -DBIGBUFOK \
- $(K5INC) $(K5INC)/krb5 $(KFLAGS)" \
- "LIBS= $(K5LIB) -ltermlib -lsocket -lnsl -lm -lresolv \
- -lkrb4 -lcrypto -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto \
- -ldes $(LIBS)"
- #Solaris 9, 10, or 11 with gcc...
- #Uses streams PTYs rather than BSD ptys as in C-Kermit 8.0 and earlier.
- #This target is chained to be the secure solaris9g+xxx targets below.
- solaris9g solaris10g solaris11g:
- @echo 'Making C-Kermit $(CKVER) for Solaris 9 or later with gcc'
- @case `uname -r` in \
- 5.9) SOLARISVERSION="-DSOLARIS9" ;; \
- 5.10) SOLARISVERSION="-DSOLARIS10" ;; \
- 5.11) SOLARISVERSION="-DSOLARIS11" ;; \
- *) SOLARISVERSION="-DSOLARIS" ;; \
- esac ; \
- $(MAKE) "MAKE=$(MAKE)" CC="gcc -m32" CC2="gcc -m32" xermit \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -g -O -Usun -DSVR4 $$SOLARISVERSION -DUSE_STRERROR \
- -DSTERMIOX -DSELECT -DFNFLOAT -DCK_PAM -DCK_SHADOW -funsigned-char \
- -DHAVE_STREAMS -DHAVE_GRANTPT -DHAVE_PTSNAME -DPUSH_PTEM \
- -DPUSH_LDTERM -DPUSH_TTCOMPAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -D_FILE_OFFSET_BITS=64 $(KFLAGS)" \
- "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv -lpam $(LIBS)"
- #Solaris 9, 10, or 11 with gcc + Kerberos 5 + OpenSSL.
- #OK C-Kermit 9.0.301.
- solaris9g+krb5+ssl solaris10g+krb5+ssl solaris11g+krb5+ssl:
- @case `openssl version` in \
- *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
- *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \
- *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \
- *) OPENSSLOPTION="" ;; \
- esac ; \
- HAVE_DES=''; \
- DES_LIB=''; \
- if ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \
- DES_LIB='-ldes425'; \
- HAVE_DES='-DCK_DES -DLIBDES'; \
- echo "HAVE DES"; \
- else echo "NO DES"; \
- fi; \
- GSSAPILIB=''; \
- K5DIR=`echo $(K5LIB) | sed 's|-L||'`; \
- echo K5DIR=$$K5DIR; \
- if ls $$K5DIR/libgssapi_krb5* > /dev/null 2> /dev/null; then \
- GSSAPILIB='-lgssapi_krb5'; \
- else GSSAPILIB='-lgssapi'; \
- fi; \
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -O -Usun -DSVR4 -DSOLARIS9 -DSTERMIOX -DSELECT -DFNFLOAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET -DBIGBUFOK \
- -DCK_AUTHENTICATION -DCK_SSL -DZLIB -DCK_KERBEROS -DKRB5 \
- -DCK_ENCRYPTION -DCK_CAST $$OPENSSLOPTION \
- $$HAVE_DES $(SSLINC) $(K5INC) $(K5INC)/krb5 $(KFLAGS)" \
- "LIBS= $(SSLLIB) $(K5LIB) -lz -lssl -ltermlib -lsocket -lnsl -lm \
- -lresolv -lcrypto \
- $$GSSAPILIB -lkrb5 -lcom_err -lk5crypto $$DES_LIB $(LIBS)"
- #Solaris 9, 10, or 11 with gcc, 64 bit build.
- #Peeking inside FILE struct not allowed in 64-bit world.
- #DON'T USE THIS ONE ON PC ARCHITECTURE - It compiles and links but won't run.
- #OK: 2009/09/25 (but not tested on Solaris 11)
- solaris9g64 solaris10g64 solaris11g64:
- @echo 'Making C-Kermit $(CKVER) for Solaris 9++ with gcc 64-bit'
- @case `uname -r` in \
- 5.9) SOLARISVERSION="-DSOLARIS9" ;; \
- 5.10) SOLARISVERSION="-DSOLARIS10" ;; \
- 5.11) SOLARISVERSION="-DSOLARIS11" ;; \
- *) SOLARISVERSION="-DSOLARIS" ;; \
- esac ; \
- $(MAKE) "MAKE=$(MAKE)" CC="gcc -m64" CC2="gcc -m64" xermit \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -g -O -Usun -funsigned-char \
- -DSVR4 $$SOLARISVERSION -DNOARROWKEYS \
- -DSTERMIOX -DSELECT -DFNFLOAT -DUSE_STRERROR -DCK_PAM -DCK_SHADOW \
- -DHAVE_STREAMS -DHAVE_GRANTPT -DHAVE_PTSNAME -DPUSH_PTEM \
- -DPUSH_LDTERM -DPUSH_TTCOMPAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv -lpam $(LIBS)"
- #Solaris 9, 10, or 11 with SunPro CC
- #Uses streams PTYs rather than BSD ptys as in C-Kermit 8.0 and earlier.
- #This target is chained to by the secure targets below.
- #OK C-Kermit 9.0
- solaris9 solaris10 solaris11:
- @echo 'Making C-Kermit $(CKVER) for Solaris 9 or later with Sun CC'
- @case `uname -r` in \
- 5.9) SOLARISVERSION="-DSOLARIS9" ;; \
- 5.10) SOLARISVERSION="-DSOLARIS10" ;; \
- 5.11) SOLARISVERSION="-DSOLARIS11" ;; \
- *) SOLARISVERSION="-DSOLARIS" ;; \
- esac ; \
- $(MAKE) "MAKE=$(MAKE)" xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -Usun -DSVR4 $$SOLARISVERSION -DUSE_STRERROR \
- -DSTERMIOX -DSELECT -DFNFLOAT -DCK_PAM -DCK_SHADOW \
- -DHAVE_STREAMS -DHAVE_GRANTPT -DHAVE_PTSNAME -DPUSH_PTEM \
- -DPUSH_LDTERM -DPUSH_TTCOMPAT \
- -DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -D_FILE_OFFSET_BITS=64 $(KFLAGS)" \
- "LIBS= $(LIBS) -ltermlib -lsocket -lnsl -lm -lresolv -lpam"
- # Solaris 9, 10, or 11 with OpenSSL built with Sun CC.
- # Here's an example of how to invoke this target in case your OpenSSL
- # headers and libraries are not in /usr/local:
- #
- # make solaris9+openssl "SSLINC=" "SSLLIB=" \
- # "KFLAGS= -I/opt/openssl-0.9.8k/include -L/opt/openssl-0.9.8k/lib"
- #
- # Don't use 'make -e' because that inhibits passing of KFLAGS to
- # the base (solaris9) target.
- #
- #OK C-Kermit 9.0
- solaris9+ssl solaris10+ssl solaris11+ssl \
- solaris9+openssl solaris10+openssl solaris11+openssl:
- @echo 'Making C-Kermit $(CKVER) for Solaris 9/10/11 with OpenSSL: cc'
- @case `openssl version` in \
- *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
- *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \
- *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \
- *) OPENSSLOPTION="" ;; \
- esac ; \
- HAVE_DES=''; \
- DES_LIB=''; \
- if ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \
- DES_LIB='-ldes425'; \
- HAVE_DES='-DCK_DES -DLIBDES'; \
- echo "HAVE DES"; \
- else echo "NO DES"; \
- fi; \
- $(MAKE) "MAKE=$(MAKE)" solaris9 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DCK_AUTHENTICATION -DCK_SSL -DZLIB $$HAVE_DES \
- -DNO_DCL_INET_ATON $$OPENSSLOPTION $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -lz -lssl $$DES_LIB -lcrypto $(LIBS)"
- # Solaris 9 or later with OpenSSL, built with gcc.
- # Remove -DNO_DCL_INET_ATON if inet_aton comes up missing. This target nicely
- # chains to the solaris{9,10,11}g target but for some reason it doesn't work if
- # you add the -DFORWARD_X option, thus the solaris9g+openssl+forward_x target.
- #
- #OK: 2011/06/14
- solaris9g+ssl solaris10g+ssl solaris11g+ssl \
- solaris9g+openssl solaris10g+openssl solaris11g+openssl:
- @echo 'Making C-Kermit $(CKVER) for Solaris 9/10/11 with OpenSSL: gcc'
- @case `openssl version` in \
- *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
- *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \
- *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \
- *) OPENSSLOPTION="" ;; \
- esac ; \
- HAVE_DES=''; \
- DES_LIB=''; \
- if ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \
- DES_LIB='-ldes425'; \
- HAVE_DES='-DCK_DES -DLIBDES'; \
- echo "HAVE DES"; \
- else echo "NO DES"; \
- fi; \
- $(MAKE) "MAKE=$(MAKE)" solaris9g KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DCK_AUTHENTICATION -DCK_SSL -DZLIB $$HAVE_DES \
- -DNO_DCL_INET_ATON $$OPENSSLOPTION $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -lz -lssl $$DES_LIB -lcrypto $(LIBS)"
- # Solaris 9 or later with gcc + OpenSSL + Shadow (32-bit).
- # Remove -DNO_DCL_INET_ATON if inet_aton comes up missing.
- # Includes long file support - not sure if this was available before Solaris 9.
- # Detects Solaris version automatically.
- #
- solaris9g+openssl+forward_x:
- @echo 'Making C-Kermit $(CKVER) for Solaris 9 or later with OpenSSL...'
- @case `openssl version` in \
- *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
- *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \
- *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \
- *) OPENSSLOPTION="" ;; \
- esac ; case `uname -r` in \
- 5.9) SOLARISVERSION="-DSOLARIS9" ;; \
- 5.10) SOLARISVERSION="-DSOLARIS10" ;; \
- 5.11) SOLARISVERSION="-DSOLARIS11" ;; \
- *) SOLARISVERSION="-DSOLARIS" ;; \
- esac ; \
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "CFLAGS = -g -O -Usun -DSVR4 $$SOLARISVERSION \
- -DHAVE_STREAMS -DHAVE_GRANTPT -DHAVE_PTSNAME -DPUSH_PTEM \
- -DPUSH_LDTERM -DPUSH_TTCOMPAT \
- -DSTERMIOX -DSELECT -DFNFLOAT -DBIGBUFOK -D_FILE_OFFSET_BITS=64 \
- -DCK_AUTHENTICATION -DCK_SSL -DCK_PAM -DCK_SHADOW -DZLIB -DLIBDES \
- -DFORWARD_X $$OPENSSLOPTION $(SSLINC) $(KFLAGS)" \
- "LIBS= $(SSLLIB) -lpam -ldes425 -lz -ltermlib \
- -lsocket -lnsl -lm -lresolv -lssl -lcrypto -lpam -lz $(LIBS)"
- # These two should be folded in with the ones just above.
- #Solaris 9 with gcc 3.1 + OpenSSL (32-bit)
- solaris9g+openssl+zlib+pam+shadow:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg32+openssl+zlib+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS9 -DUSE_STRERROR $(KFLAGS)"
- #Solaris 10 with gcc 3.1 + OpenSSL (32-bit)
- solaris10g+openssl+zlib+pam+shadow:
- $(MAKE) "MAKE=$(MAKE)" solaris2xg32+openssl+zlib+pam+shadow \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSOLARIS10 -DUSE_STRERROR $(KFLAGS)"
- #The following (old, old) sunosxxx entries are for debugging and testing only.
- sunos41x:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS41 -DDIRENT -DNOTLOG -DNOMSEND \
- -DNOUUCP -DNOSIGWINCH -DNOREDIRECT -DNOPUSH -DNOCCTRAP \
- -DNOICP -DNOLOCAL $(KFLAGS)"
- #SunOS 4.1.x, debugging with Pure Software, Inc., Purify 2 (commercial runtime
- #error-detection software for catching wild array references, etc).
- #Before running the resulting wermit, you'll also need to define and export
- #the following environment variables (as in this example):
- #PURIFYHOME=/usr/local/purify ; export PURIFYHOME
- #PURIFYCACHEDIR=/tmp ; export PURIFYCACHEDIR
- sunos41cp:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 / BSD / Curses / Purify...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CC2= purify -cache_dir=/usr/tmp cc" \
- "CFLAGS= -g -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \
- -DSAVEDUID -DCK_CURSES $(KFLAGS)" \
- "LIBS= -lcurses -ltermcap"
- #SunOS 4.1 with malloc debugger
- sunos41md:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 malloc debug...
- $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \
- -DSAVEDUID $(KFLAGS) -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG"
- sunos41gmd:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
- $(MAKE) mermit KTARGET=$${KTARGET:-$(@)} "CC= gcc " "CC2= gcc" \
- "CFLAGS= -g -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \
- -DNDGPWNAM -DSAVEDUID -DCK_CURSES -DRLOGCODE \
- $(KFLAGS) -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG" \
- "LIBS= -lcurses -ltermcap"
- #SunOS version 4.1, gcc, profiling with gprof, no debugging.
- #To get profile, "make sunos41p" (on Sun), then "./wermit". After running
- #wermit, "gprof ./wermit | lpr" (or whatever) to get execution profile.
- sunos41p:
- @echo Making C-Kermit $(CKVER) for SunOS 4.x with profiling...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc " "CC2= gcc" \
- "CFLAGS= -DSUNOS41 -DNODEBUG -DSAVEDUID -DDIRENT -DTCPSOCKET \
- -DNDGPWNAM $(KFLAGS) -pg" "LNKFLAGS = -pg"
- #SunOS version 4.1 or later, BSD environment, minimum features.
- sunos41min:
- @echo Minimum interactive
- $(MAKE) "MAKE=$(MAKE)" sunos41 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOSPL -DNOXMIT -DNOMSEND -DNOFRILLS -DNORETRY \
- -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS \
- -DNOSHOW -DNOSETKEY -DNOUUCP -DNORECALL -DNOREDIRECT \
- -DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ \
- -DNONET -DCK_SMALL -DNOCKSPEED -DNOCKTIMERS -DNOLOGIN \
- -DNOCKXYZ -DNOKERBEROS -DNOMKDIR -DNOPATTERNS -DNOPERMS -DNOPIPESEND \
- -DNORECURSIVE -DNORENAME -DNORESEND -DNOSETKEY \
- -DNOTRIGGER -DNOTUNING $(KFLAGS)" "LNKFLAGS = -s"
- #SunOS version 4.1, BSD environment, min size, command-line only...
- sunos41m:
- @echo Minimum size
- $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOICP $(KFLAGS)"
- #SunOS version 4.1, BSD environment, min size, cmd-line only, remote only...
- #
- sunos41mr:
- @echo Minimum size
- $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOICP -DNOLOCAL $(KFLAGS)"
- #SunOS version 4.1, BSD environment, min size, interactive...
- sunos41mi:
- @echo Minimum size
- $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOCMDL $(KFLAGS)"
- #SunOS version 4.1, BSD environment, min size, interactive, remote only...
- sunos41mir:
- @echo Minimum size
- $(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOCMDL -DNOLOCAL $(KFLAGS)"
- #SunOS 4.1, System V R3 environment (-i option omitted).
- sunos41s5:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3...
- @echo For testing purposes only - NOT for production use.
- @echo For a useable version, make sunos41 instead.
- $(MAKE) wermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP -DNOLEARN -DCK_POLL $(KFLAGS) -O"
- #As above, but with curses support
- sunos41s5c:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3...
- @echo Curses included.
- @echo For testing purposes only - NOT for production use.
- @echo For a useable version, make sunos41 instead.
- $(MAKE) wermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP -DNOLEARN \
- -DCK_POLL -DCK_CURSES -DCK_NEWTERM $(KFLAGS) -O" "LIBS= -lcurses"
- #As above, but with curses support AND net support
- sunos41s5tcpc:
- @echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3...
- @echo TCP/IP and curses included. No debug log.
- @echo For testing purposes only - NOT for production use.
- @echo For a useable version, make sunos41 instead.
- $(MAKE) xermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP -DCK_POLL \
- -DNODEBUG -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET $(KFLAGS) -O" \
- "LIBS= -lcurses -lresolv"
- # (End of SunOS test entries...)
- #Apollo with Domain SR10.0 or later, BSD environment
- #Reportedly, it might also help to add '-A,systype=bsd4.3' to CFLAGS.
- #Reportedly, there is also a problem with getc & putc macros that can
- #be handled by using '#ifdef apollo' somewhere to redefine them???
- #On the other hand, other reports indicate that it works fine as-is.
- #NOTE: This entry was previously like this:
- # $(MAKE) wermit "CFLAGS= -DNOFILEH -DBSD4 $(KFLAGS) -Uaegis \
- # -DTCPSOCKET -U__STDC__"
- #Reports (Dec 91) indicate SR10 has an ANSI-compliant C compiler,
- #in addition to an older one that claimed to be ANSI-compliant but wasn't.
- #The following make entry (plus checks that are made in ckcdeb.h) detect
- #which compiler is used and define the CK_ANSIC or NOANSI flags accordingly.
- sr10-bsd:
- @echo Making C-Kermit $(CKVER) for Apollo SR10.0 / BSD ...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DAPOLLOSR10 -DBSD43 -DTCPSOCKET -DCK_CURSES -DNOLEARN \
- -Uaegis $(KFLAGS)" "LIBS= -lcurses -ltermcap"
- #Apollo with Domain SR10.0 or later, System V R3 environment.
- #Don't use the optimizer (-O), it causes problems at runtime.
- sr10-s5r3:
- @echo Making C-Kermit $(CKVER) for Apollo SR10.0 / Sys V R3 ...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNOFILEH -DSVR3 -DAPOLLOSR10 -DNOLEARN $(KFLAGS) \
- -Uaegis -U__STDC__"
- #Apollo Domain/IX (untested, try this if sr10-bsd doesn't work)
- # -DTCPSOCKET can probably be added here.
- apollobsd:
- @echo Making C-Kermit $(CKVER) for Apollo Domain/IX...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CC= /bin/cc " "CC2= /bin/cc " \
- "CFLAGS= -DNOFILEH -DBSD4 -DAPOLLOBSD -DNOLEARN $(KFLAGS) -Uaegis"
- #Version 7 Unix (see comments near top of makefile)
- v7:
- @echo Making C-Kermit $(CKVER) for UNIX Version 7.
- @echo Read the makefile if you have trouble with this...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS=-DV7 -DPROCNAME=\\\"$(PROC)\\\" \
- -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
- -DNPTYPE=$(NPTYPE) $(DIRECT) -DO_RDWR=2 -DO_NDELAY=0 -DO_SCCS_ID \
- -DNOLEARN $(KFLAGS)"
- #AT&T UNIX System V R3, signal() is void rather than int.
- #Uses dirent.h and Honey DanBer UUCP.
- #Add the -i link option if necessary.
- #If you get errors like "ws_row undefined" in ckutio.c, add -DNONAWS.
- sys5r3:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS="
- #As above, plus curses.
- sys5r3c:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3 + curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DCK_CURSES -DNONAWS -DNOLEARN \
- $(KFLAGS) -O" "LNKFLAGS=" "LIBS = -ltermlib"
- #System V R3.2 for PCs built on Interactive UNIX SV/386 R4.x
- #but with all calls to dup2() disabled because generic SVR3 does not have dup2.
- # (The -linet library might not need to be in this one.)
- sys5r32is:
- @echo 'Making C-Kermit $(CKVER) for System V/386 R32
- $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \
- -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES -DNONAWS \
- -DPOSIX_JC -DCK_REDIR -DCK_POLL -DDCLGETCWD -DNOFDZERO -DNOREDIRECT \
- -DNOZEXEC -DNOLEARN $(KFLAGS)" "LIBS=-lcurses -lc_s -linet"
- #System V R3.2 for PCs built on Interactive UNIX SV/386 R4.x
- #but with all calls to dup2() disabled because generic SVR3 does not have dup2.
- #With TCP/IP added.
- sys5r32isnet:
- @echo 'Making C-Kermit $(CKVER) for System V/386 R32 + TCP/IP
- $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \
- -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES -DNONAWS \
- -DPOSIX_JC -DCK_REDIR -DCK_POLL -DDCLGETCWD -DNOFDZERO -DNOREDIRECT \
- -DNOLEARN -DNOZEXEC -DTCPSOCKET $(KFLAGS)" "LIBS=-lcurses -lc_s -linet"
- iclsys5r3:
- make sys5r3 KTARGET=$${KTARGET:-$(@)} KFLAGS=-DICLSVR3
- #AT&T UNIX System V R3. As above, but no ANSI prototyping.
- sys5r3na:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DNOANSI -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS="
- #AT&T UNIX System V R3, for 3B computers with Wollongong TCP/IP.
- sys5r3net3b:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX SVR3/3B/Wollongong...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DWOLLONGONG -DNOLEARN $(KFLAGS) \
- -O" "LIBS= -lnet -lnsl_s" "LNKFLAGS ="
- #AT&T UNIX System V R3, signal() is void rather than int.
- #Uses dirent.h and Honey DanBer uucp, has <termiox.h>.
- #Has <termiox.h> for RTS/CTS flow control.
- sys5r3tx:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTERMIOX -DNOLEARN \
- $(KFLAGS) -i -O" "LNKFLAGS ="
- #AT&T UNIX System V R3, signal() is void rather than int.
- #Uses dirent.h and Honey DanBer uucp, has <termiox.h>.
- #Has <sys/termiox.h> for RTS/CTS flow control.
- sys5r3sx:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DSTERMIOX -DNOLEARN \
- $(KFLAGS) -i -O" "LNKFLAGS ="
- #AT&T UNIX System V R4.
- #Has <termiox.h>.
- sys5r4:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DTERMIOX -DNOLEARN $(KFLAGS)" \
- "LNKFLAGS = -s"
- #AT&T UNIX System V R4 with Wollongong TCP/IP.
- #Has <termiox.h>.
- sys5r4net:
- @echo 'Making C-Kermit $(CKVER) for System V R4 + Wollongong TCP/IP...'
- @echo ' If sockets-library routines are missing at link time, then'
- @echo ' try the sys5r4net2 entry.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOLEARN \
- -DTERMIOX -DWOLLONGONG $(KFLAGS)" "LNKFLAGS = -s"
- #As above, but needs libs included.
- sys5r4net2:
- @echo ' PLEASE READ ckuins.txt IF YOU GET MISSING HEADER FILES.'
- @echo ' (Search for WOLLONGONG...)'
- $(MAKE) sys5r4net KTARGET=$${KTARGET:-$(@)} "LIBS= -lsocket -lnsl"
- #As above plus curses.
- sys5r4net2c:
- echo 'Making C-Kermit $(CKVER) for System V R4 + Wollongong TCP/IP...'
- @echo ' PLEASE READ ckuins.txt IF YOU GET MISSING HEADER FILES.'
- @echo ' (Search for WOLLONGONG...)'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOLEARN \
- -DTERMIOX -DWOLLONGONG -DCK_CURSES $(KFLAGS)" "LNKFLAGS = -s" \
- "LIBS= -lsocket -lnsl -lcurses"
- #DELL UNIX System V R4.
- #Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
- #are not misplaced in sys (rather than netinet and arpa, respectively).
- #Uses ANSI C constructs, advisory file locking on devices, etc.
- #Warning: -DSTERMIOX enables hardware flow control (RTS/CTS), but reportedly
- #this does not work with the normal drivers. However, it might still work
- #on non-Dell systems, or even Dell systems with different drivers installed.
- dellsys5r4:
- @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT -DHDBUUCP \
- -DTCPSOCKET -DSTERMIOX -DCK_POLL $(KFLAGS)" \
- "LIBS= -lsocket -lnsl" "LNKFLAGS = -s"
- #As above, curses support added...
- dellsys5r4c:
- @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT -DHDBUUCP \
- -DTCPSOCKET -DSTERMIOX -DCK_CURSES -DCK_POLL \
- $(KFLAGS)" "LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s"
- #Minimum interactive: As above, but with every conceivable option removed.
- dellsys5r4mi:
- @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
- @echo 'Minimum-size interactive'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT \
- -UTCPSOCKET -DNOCMDL -DNOSPL -DNOXMIT -DCK_POLL \
- -DNOMSEND -DNOFRILLS -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
- -DNOSCRIPT -DNOCSETS -DNOSHOW -DNOSETKEY -DNOSERVER -DNOUUCP \
- -DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ \
- $(KFLAGS)" "LNKFLAGS = -s"
- #Command-line only version.
- dellsys5r4m:
- @echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
- @echo 'Command-line only'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT \
- -UTCPSOCKET -DNOICP -DNOFRILLS -DNODIAL -DNODEBUG -DNOTLOG -DNOCSETS \
- -DNOSETKEY -DNOESCSEQ -DNOJC -DNOFDZERO -DCK_POLL \
- $(KFLAGS)" "LNKFLAGS = -s"
- #AT&T UNIX System V R4.
- #Has <sys/termiox.h>.
- sys5r4sx:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DSTERMIOX -DNOLEARN \
- $(KFLAGS)" "LNKFLAGS = -s" "LIBS=$(LIBS)"
- #AT&T UNIX System V R4.
- #Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
- #are not misplaced in sys (rather than netinet and arpa, respectively).
- #Uses ANSI C constructs, <sys/termiox.h>, etc etc.
- sys5r4sxtcp:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl $(LIBS)" "LNKFLAGS= -s"
- #AT&T UNIX System V R4.
- #As above + curses.
- sys5r4sxtcpc:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DCK_CURSES -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap $(LIBS)" "LNKFLAGS = -s"
- #AT&T UNIX System V R4. CONSENSYS SVR4.2-1.
- #Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
- #are not misplaced in sys (rather than netinet and arpa, respectively).
- #Uses ANSI C constructs, <sys/termiox.h>, etc.
- # Fullscreen -DCK_CURSES added (with curses & termcap libs)
- # Submission by Robert Weiner/Programming Plus, rweiner@watsun.cc.columbia.edu
- sys5r4sxtcpf:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -L/usr/ccs/lib -lcurses -ltermcap" \
- "LIBS=$(LIBS)" "LNKFLAGS = -s"
- #Smallest possible version for System V R4
- s5r4m:
- @echo Minimum size
- $(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
- -DNOSCRIPT -DNOCSETS -DNOICP -DNOMSEND -UTCPSOCKET" "LNKFLAGS = -s"
- #Smallest possible interactive version of above
- s5r4mi:
- @echo Minimum interactive
- $(MAKE) "MAKE=$(MAKE)" sys5r4sx \
- "KFLAGS=-DNOSPL -DNOXMIT -DNOMSEND -DNOFRILLS -DNOSHOW \
- -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS -DNOSETKEY \
- -UTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s"
- #AT&T UNIX System V R4, has <sys/termiox.h>
- #ANSI C function prototyping disabled.
- sys5r4sxna:
- @echo No ANSI C prototyping...
- $(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DNOANSI"
- #Stratus FTX.
- ftx:
- @echo 'Making C-Kermit $(CKVER) for Stratus FTX 3.x...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DFTX -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DNOGETUSERSHELL -DNOLEARN +DA1.1 $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS=$(LIBS)"
- #Stratus FTX + TCP/IP.
- ftxtcp:
- @echo 'Making C-Kermit $(CKVER) for Stratus FTX 3.x...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DFTX -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DSTERMIOX -DTCPSOCKET -DNO_DNS_SRV +DA1.1 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl $(LIBS)" "LNKFLAGS= -s"
- #NCR MP-RAS 2.03 or 3.02
- mpras:
- @echo 'Making C-Kermit $(CKVER) for NCR MP-RAS...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DNCRMPRAS -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DNOGETUSERSHELL -DUSE_FILE__CNT -DNOLEARN -DNO_DNS_SRV $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS=$(LIBS)"
- #NCR MP-RAS 2.03 or 3.02 with TCP/IP and curses
- mprastcpc:
- @echo 'Making C-Kermit $(CKVER) for NCR MP-RAS + TCP/IP + curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CFLAGS=-DTCPSOCKET \
- -DCK_CURSES -DSVR4 -DNCRMPRAS -DDIRENT -DHDBUUCP -DSTERMIOX -DNOLEARN \
- -DNOGETUSERSHELL -DNO_DNS_SRV DUSE_FILE__CNT -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS= -lsocket -lnsl -lcurses -ltermcap $(LIBS)"
- #SINIX-L V5.41 - includes curses, tcp/ip - Use this one for i386.
- #This version of SINIX doesn't like fdopen() or popen().
- sinix541:
- @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf SINIX V5.41/i386'
- $(MAKE) ckcpro.$(EXT) "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DNO_DNS_SRV \
- -DSNI541 -DNOGETUSERSHELL -DNONETCMD -DNOPOPEN -kansi -W0 $(KFLAGS)"
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DNO_DNS_SRV -DNOPOPEN \
- -DFNFLOAT -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC \
- -DSNI541 -DNOGETUSERSHELL -DNONETCMD -kansi -W0 -O $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" "LNKFLAGS = -s"
- sinix541i:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sinix541
- #SINIX V5.42 - includes curses, tcp/ip, everything - Use this one for MIPS.
- # As of C-Kermit 7.1, optimization removed -- takes (literally) forever.
- sinix542:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DNO_DNS_SRV \
- -DFNFLOAT -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC \
- -DSNI542 -DNOGETUSERSHELL -kansi -W0 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" "LNKFLAGS = -s"
- #SINIX V5.42 gcc - includes curses, tcp/ip, everything.
- #This one was used to build the Pyramid-architecture RM600 version
- #on SINIX-P 5.42 A10 with gcc but should work for SINIX 5.42 on any other
- #architecture with gcc.
- sinix542g:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC=gcc" "CC2=gcc" \
- "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DNO_DNS_SRV \
- -DFNFLOAT -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC \
- -DSNI542 -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" \
- "LNKFLAGS = -s"
- #SINIX V5.42 - includes curses, tcp/ip, everything - Use this one for Intel.
- # (Note: SNI discontinued Intel support after 5.42.)
- sinix542i:
- @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf SINIX-Z V5.42...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DFNFLOAT -DSTERMIOX \
- -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DNO_DNS_SRV -kansi \
- -DSNI542 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" \
- "LNKFLAGS = -s"
- #Siemens Nixdorf Reliant UNIX V5.43 - includes curses, tcp/ip, everything:
- # . gettimeofday() suddenly has only one arg instead of two (GTODONEARG).
- # . The syntax of the Olimit specifier changed.
- # . The name was changed from SINIX to Reliant UNIX in version 5.43C.
- sni543:
- @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf Reliant UNIX V5.43'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSINIX -DSNI543 -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DGTODONEARG \
- -DNO_DNS_SRV -kansi -W0 -O -F Olimit,3100 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s"
- #Siemens Nixdorf Reliant UNIX V5.44 - Like 5.43 but with different banner.
- sni544:
- @echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf Reliant UNIX V5.44'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSINIX -DSNI544 -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DGTODONEARG \
- -DNO_DNS_SRV -kansi -W0 -O -K Olimit,3100 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s"
- #Commodore Amiga with AT&T UNIX System V R4 and TCP/IP support.
- #Has <sys/termiox.h>.
- svr4amiganet:
- @echo 'Making C-Kermit $(CKVER) for Amiga SVR4 + TCP/IP...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC=gcc" "CC2=gcc" \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DTCPSOCKET -DCK_CURSES $(KFLAGS)" "LNKFLAGS = -s" \
- "LIBS = -lsocket -lnsl -ltermlib"
- #SCO (Novell (Univel)) UnixWare 1.x or 2.0, no TCP/IP.
- #This assumes the Novell SDK 1.0, which has <sys/termiox.h>.
- #UnixWare users with the "Prime Time Freeware" CD-ROM SDK will probably have
- #to use the sys5r4 entry (no termiox.h file, so no hardware flow control).
- #Change -DSELECT to -DCK_POLL if -DSELECT causes problems.
- # NOTE: Unixware 1.x builds have not been tried in C-Kermit 7.0.
- unixware:
- $(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DOLD_UNIXWARE -DCK_NEWTERM -DSELECT -DNOGETUSERSHELL \
- -DNOSYSLOG $(KFLAGS)" "LIBS=-lcrypt"
- #UnixWare 1.x or 2.0 with TCP/IP and curses.
- #fork()-based CONNECT - no high serial speeds.
- unixwarenetc:
- $(MAKE) "MAKE=$(MAKE)" sys5r4sxtcpc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DOLD_UNIXWARE -DCK_NEWTERM -DSELECT -DNOGETUSERSHELL \
- -DNOSYSLOG $(KFLAGS)" "LIBS=-lcrypt -lresolv"
- uw10:
- $(MAKE) unixwarenetc KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
- #This is for Unixware 2.0.x only - use unixware21 for UW 2.1.x.
- #Has special library search and enables special kludge around library
- #foulup regarding vfork() (which Kermit doesn't use). Forces POSIX-style
- #hangup.
- unixware20:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 2.0.x...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DOLD_UNIXWARE -DUNIXWARE2 -DSELECT -DSVR4 -DDIRENT \
- -DHDBUUCP -DBIGBUFOK -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES \
- -DTCPSOCKET -DUW200 -DFNFLOAT -DCK_NEWTERM -DNOSYSLOG $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lcrypt -lgen -lm -lresolv" \
- "LNKFLAGS = -s"
- uw20:
- $(MAKE) unixware20 KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
- #Adds big buffers ("large memory model") - otherwise the same as UnixWare 1.x.
- unixware21:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 2.1.x...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DNOSYSLOG -DSTERMIOX -DCK_CURSES -DTCPSOCKET \
- -DCK_NEWTERM -DFNFLOAT -DUNIXWARE2 $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv \
- $(LIBS)" "LNKFLAGS = -s"
- #Unixware 2.1.0
- uw21:
- $(MAKE) unixware21 KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
- #Unixware 2.1.3
- uw213:
- $(MAKE) unixware21 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DUSE_FILE__CNT $(KFLAGS)"
- #Unixware 2.1 with IKSD support
- uw21iksd:
- $(MAKE) unixware21 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DCK_SHADOW $(KFLAGS)" "LIBS= -lgen"
- #UnixWare 7 with tc[gs]etspeed() high serial speeds & select()-based CONNECT
- #and as of C-Kermit 8.0.212, large file support (LFS).
- #NOTE: This is the one we use.
- unixware7t:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 7 with POSIX i/o...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DFNFLOAT -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \
- -DUW7 -DUSETCSETSPEED -DCK_NEWTERM -DNOLSTAT -DDCLTIMEVAL \
- -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DNEEDMDMDEFS $(KFLAGS)" \
- "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
- "LNKFLAGS = -s"
- #UnixWare 7 - select()-based CONNECT - no POSIX i/o - no high serial speeds.
- #In other words, just like the UnixWare 1 and 2 builds.
- unixware7x:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 7...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DNOLSTAT \
- -DFNFLOAT -DCK_NEWTERM $(KFLAGS)" \
- "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
- "LNKFLAGS = -s"
- #UnixWare 7 with POSIX cfset[oi]speed() to allow high serial speeds.
- #(but the high speeds don't work)
- unixware7p:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 7 with POSIX i/o...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \
- -DFNFLOAT -DCK_NEWTERM -DNOLSTAT $(KFLAGS)" \
- "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
- "LNKFLAGS = -s"
- # UnixWare 7 built with gcc - This does not work at all...
- # Reportedly gcc 2.8.1 is broken on Unixware 7. Try egcs?
- unixware7g:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 7 with gcc...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s -shlib"
- "CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DNOLSTAT \
- -DFNFLOAT -DCK_NEWTERM $(KFLAGS)" \
- "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
- "LNKFLAGS = -s"
- unixware7:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" unixware7t \
- KTARGET=$${KTARGET:-$(@)}
- uw7:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" unixware7t \
- KTARGET=$${KTARGET:-$(@)}
- #SCO OpenUNIX 8.0
- ou8:
- @echo 'Making C-Kermit $(CKVER) for Open UNIX 8...'
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DOU8 $(KFLAGS)" unixware7t \
- KTARGET=$${KTARGET:-$(@)}
- #UnixWare 7 with OpenSSL
- uw7ssl uw7+ssl:
- @echo 'Making C-Kermit $(CKVER) for UnixWare 7 and OpenSSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DCK_AUTHENTICATION -DCK_SSL -DCK_SHADOW \
- -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
- -DFNFLOAT -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \
- -DUW7 -DUSETCSETSPEED -DCK_NEWTERM -DNOLSTAT -DDCLTIMEVAL \
- $(SSLINC) $(KFLAGS)" \
- "LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv \
- -lgen -lcudk70 $(SSLLIB) -lssl -lcrypto $(LIBS)" \
- "LNKFLAGS = -s"
- #As above but includes Shadow password support needed for IKSD.
- uw7iksd:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DCK_SHADOW $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)} "LIBS= -lgen" unixware7t
- #As above but links with static API for realpath() so a binary built
- #with this target on UW7.1 will also work on 7.0. Requires SCO UDK
- #rather than the stock compiler.
- uw7iksdudk:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DCK_SHADOW $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)} "LIBS= -lgen -lcudk70" unixware7t
- #ESIX SVR4.0.3 or 4.04 with TCP/IP support.
- #Has <sys/termiox.h>, ANSI C function prototyping disabled.
- #Add -m486 to CFLAGS if desired.
- esixr4:
- @echo 'Making C-Kermit $(CKVER) for ESIX SVR4 + TCP/IP...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOANSI \
- -DSTERMIOX -DTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s" \
- "LIBS = -lsocket -lnsl"
- #AT&T UNIX System V R4.
- #Has <sys/termiox.h>, Wollongong WIN/TCP TCP/IP.
- sys5r4sxnet:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
- -DSTERMIOX -DWOLLONGONG $(KFLAGS)" "LNKFLAGS = -s"
- #AT&T UNIX System V R4, no <termio.x> or <sys/termio.x>.
- sys5r4nx:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOLEARN $(KFLAGS)" \
- "LNKFLAGS = -s"
- #AT&T UNIX System V R4, no <termio.x> or <sys/termio.x>, curses, TCP/IP.
- sys5r4nxnetc:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
- -DCK_CURSES -DTCPSOCKET $(KFLAGS)" \
- "LIBS = -lcurses -lsocket -lnsl -ltcpip" \
- "LNKFLAGS = -s"
- #AT&T UNIX System V R4, no <termio.x> or <sys/termio.x>, Wollongong TCP/IP.
- sys5r4nxtwg:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DWOLLONGONG $(KFLAGS)"
- "LNKFLAGS = -s"
- #ICL UNIX System V R4.(DRS N/X) version :-
- #UNIX System V Release 4.0 ICL DRS 6000 (SPARC)
- #DRS/NX 6000 SVR4 Version 5 Level 1 Increment 4
- #Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
- #are not misplaced in sys (rather than netinet and arpa, respectively).
- #Uses ANSI C constructs, advisory file locking on devices, etc.
- #Remove -lnsl if it causes trouble.
- iclsys5r4:
- @echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 (DRS N/X)'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lresolv " "LNKFLAGS = -s"
- #As above but for DRS/NX 4.2MP 7MPlus.
- iclsys5r4m+:
- @echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 DRS/NX 4.2MP+'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOIKSD \
- -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lm -lc -g -lgen " "LNKFLAGS = -s"
- #As above but for DRS/NX 4.2MP 7MPlus with IKSD support.
- iclsys5r4m+iksd:
- @echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 DRS/NX 4.2MP+'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lm -lc -g -lgen -lresolv " "LNKFLAGS = -s"
- iclsys5r4_486:
- $(MAKE) "MAKE=$(MAKE)" iclsys5r4 KTARGET=$${KTARGET:-$(@)}
- #Data General DG/UX 4.30 (System V R3) for DG AViiON, with TCP/IP support.
- dgux430:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 4.30...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX430 -DSVR3 -DDIRENT -DTCPSOCKET \
- -DNOINADDRX -DNOGETUSERSHELL $(KFLAGS)"
- #Data General DG/UX 4.30 for DG AViiON, with TCP/IP support with BSDisms.
- dgux430bsd:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 4.30...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX430 -D_BSD_SOURCE -DBSD4 \
- -DNOINADDRX -DTCPSOCKET -DNOGETUSERSHELL $(KFLAGS)"
- #Data General DG/UX 5.4 (System V R4) for DG AViiON, with TCP/IP support.
- #Add -lsocket -lnsl if inet_addr comes up missing...
- #Hmmm - I really think CK_POLL can be removed from this one in which case
- #there is no difference between dgux540 and dgux540i.
- dgux540:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
- -DSTERMIOX -DTCPSOCKET -DCK_POLL -DNOGETUSERSHELL $(KFLAGS)"
- #Data General DG/UX 5.40 (System V R4) for Intel AViiON, with TCP/IP support.
- dgux540i:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
- -DSTERMIOX -DTCPSOCKET -DNOGETUSERSHELL $(KFLAGS)" \
- "LIBS = -lsocket -lnsl"
- dgux54:
- make dgux540 KTARGET=$${KTARGET:-$(@)}
- #Data General DG/UX 5.4 (= System V R4) for DG AViiON, with TCP/IP support.
- # And curses.
- dgux540c:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.4...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- $(KFLAGS)" "LIBS= -lcurses8 -ltermcap" "LNKFLAGS = -s"
- #As above but for Intel - only difference is name library names.
- dgux540ic:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- $(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
- dgux54c:
- make dgux540c KTARGET=$${KTARGET:-$(@)}
- #DG/UX 5.4R3.10
- dgux54310:
- @echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.4R3...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DDGUX540 -DDGUX54310 -DDIRENT -DHDBUUCP -DSELECT \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- -DNOINADDRX $(KFLAGS)" "LIBS= -lcurses8 -ltermcap" "LNKFLAGS = -s"
- #DG/UX 5.4R4.10 - Includes everything.
- dgux54410:
- @echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.10...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDGUX54410 -DDIRENT -DHDBUUCP -DSELECT \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- -DNOINADDRX $(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
- #DG/UX 5.4R4.11 - Includes everything.
- dgux54411:
- @echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.11...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDGUX54411 -DDIRENT -DHDBUUCP -DSELECT \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- -DNOINADDRX $(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
- #DG/UX 5.4R4.20 - Includes everything.
- dgux54420:
- @echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.20...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DDGUX540 -DDGUX54420 -DDIRENT -DHDBUUCP -DSELECT \
- -DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
- -DNOINADDRX $(KFLAGS)" \
- "LIBS = -lsocket -lresolv -lnsl -lcurses -ltermcap"
- #Silicon Graphics System V R3 with BSD file system (IRIS)
- iris:
- @echo Making C-Kermit $(CKVER) for Silicon Graphics IRIX pre-3.3...
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR3 -DLONGFN -DNOLEARN $(KFLAGS) -I/usr/include/bsd" \
- "LIBS = -lbsd"
- #Silicon Graphics IRIS System V R3
- irix33:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 3.3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS = -s"
- #Silicon Graphics Iris Indigo with IRIX 4.0.0 or 5.0...
- #Strict ANSI C compilation, TCP/IP support included
- irix40:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \
- -DCK_ANSIC -DTCPSOCKET $(KFLAGS) -O -Olimit 1600 -I/usr/include/bsd" \
- "LNKFLAGS = -s"
- #As above, but with fullscreen display (curses) and Sun Yellow Pages support.
- #NOTE: IRIX versions prior to 5 run COFF binaries.
- irix40ypc:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0.'
- @echo 'Includes fullscreen file display and Sun Yellow Pages...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DCK_CURSES \
- -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET $(KFLAGS) \
- -O -Olimit 1600 -I/usr/include/bsd" \
- "LIBS = -lcurses -lsun" "LNKFLAGS = -s"
- # Silicon Graphics Iris Series 4D/*, IRIX 4.0.x, -O4 ucode optimized.
- # Huge temporary file space needed for ucode optimizer. If you get an error
- # like "ugen: internal error writing to /tmp/ctmca08777: Error 0", define the
- # the TMPDIR environment variable to point to a file system that has more
- # space available, e.g. "setenv TMPDIR /usr/tmp".
- irix40u:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \
- -DCK_ANSIC -DTCPSOCKET $(KFLAGS) -O4 -Olimit 1600" \
- "LNKFLAGS=-O4 -Olimit 1600 -s" "EXT=u"
- # As above, with Curses Support added
- irix40uc:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \
- -DCK_ANSIC -DCK_CURSES -DTCPSOCKET $(KFLAGS) -O4 -Olimit 1600" \
- "LNKFLAGS=-O4 -Olimit 1600 -s" "EXT=u" "LIBS= -lcurses -ltermcap"
- #Silicon Graphics IRIX 5.x.
- #Yellow Pages and Curses support included.
- #IRIX version 5.x can run COFF or ELF binaries.
- irix51:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 5.x'
- @echo 'Includes fullscreen file display and Yellow Pages...'
- @echo 'Add -mips<n> to CFLAGS specify a particular hardware target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX51 -DSVR4 -DDIRENT -DHDBUUCP -DCK_CURSES -DCK_NEWTERM \
- -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET -DSELECT -DNOGETUSERSHELL \
- -DSYSTIMEH -DDCLPOPEN -DDCLFDOPEN $(KFLAGS) -ansi -O -Olimit 3000" \
- "LIBS = -lcurses" "LNKFLAGS = -s"
- #Use this one if irix51 blows up due to lack of swap space or whatever.
- irix51x:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 5.x'
- @echo 'Includes fullscreen file display and Yellow Pages...'
- @echo 'Add -mips<n> to CFLAGS specify a particular hardware target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DIRIX51 -DSVR4 -DDIRENT -DHDBUUCP -DCK_CURSES -DCK_NEWTERM \
- -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET -DSELECT -DNOGETUSERSHELL \
- -DSYSTIMEH -DDCLPOPEN -DDCLFDOPEN $(KFLAGS)" \
- "LIBS = -lcurses" "LNKFLAGS = -s"
- irix51ypc:
- $(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS= $(KFLAGS)"
- #IRIX 5.2 adds RTS/CTS
- irix52:
- $(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DIRIX52 -DCK_RTSCTS $(KFLAGS)"
- irix53:
- $(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DIRIX52 -DIRIX53 -DCK_RTSCTS $(KFLAGS)"
- irix53x:
- $(MAKE) "MAKE=$(MAKE)" irix51x KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DIRIX52 -DIRIX53 -DCK_RTSCTS $(KFLAGS)"
- #Silicon Graphics IRIX 6.[024] common stuff.
- #Yellow Pages and Curses support included.
- #IRIX version 6.0 and later runs only ELF binaries.
- #Depends on code changes in ckcdeb.h that make -DIRIX6x define all
- #lower IRIX6x values and IRIX51.
- irix6x:
- @echo 'Includes fullscreen file display and Yellow Pages...'
- @echo 'Add -mips<n> to specify a particular hardware target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DCK_CURSES -DCK_NEWTERM -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET \
- -DSELECT -DCK_RTSCTS -O $(KFLAGS)" \
- "LIBS = -lcurses" "LNKFLAGS = -s $(LNKFLAGS)"
- #Silicon Graphics IRIX 6.0.
- irix60:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.0'
- @$(MAKE) "MAKE=$(MAKE)" \
- "KFLAGS=-DIRIX60 -Olimit 2138 $(KFLAGS)" \
- irix6x KTARGET=$${KTARGET:-$(@)}
- #Silicon Graphics IRIX 6.2.
- #Serial speeds > 38400 are available in IRIX 6.2 on O-class machines only.
- #Note: Olimit must be a number > 0.
- irix62:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.2'
- @$(MAKE) "MAKE=$(MAKE)" \
- LNKFLAGS="-Wl,-woff,84" \
- "KFLAGS=-DIRIX62 -Olimit 4700 $(KFLAGS)" \
- irix6x KTARGET=$${KTARGET:-$(@)}
- #Silicon Graphics IRIX 6.3.
- irix63:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.3'
- @$(MAKE) "MAKE=$(MAKE)" irix62 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DIRIX63"
- #Silicon Graphics IRIX 6.4.
- # -woff,84 to linker stops complaints about no symbols loaded from
- # curses, and -woff 1110 stops complaints about unreachable "break;"
- # statements in ckcpro.c among others.
- # tested on SGI Octane, running IRIX 6.4 up to 115200 bps.
- # -Olimit 0 means infinite.
- irix64:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.4'
- @$(MAKE) "MAKE=$(MAKE)" \
- LNKFLAGS="-Wl,-woff,84" \
- "KFLAGS=-DIRIX64 -DCK_RTSCTS -Olimit 3000 -woff 1110 $(KFLAGS)" \
- irix6x KTARGET=$${KTARGET:-$(@)}
- irix64gcc:
- @echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.4 gcc'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -DSVR4 -DIRIX64 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DSELECT -DPWID_T=uid_t -DTCPSOCKET -DNOCOTFMC \
- -DCK_ANSIC -DCK_RTSCTS -DCK_NEWTERM -DCK_CURSES \
- $(KFLAGS) -O" "LIBS= -lcurses -ltermcap -lcrypt"
- #Note the new Optimization option syntax for MIPSpro CC 7.2.1.2m.
- #See note on irix65gcc target about Large File Support (LFS).
- irix65:
- @echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5'
- @$(MAKE) "MAKE=$(MAKE)" LNKFLAGS="-Wl,-woff,84" \
- "KFLAGS=-DIRIX65 -D_LARGEFILE_SOURCE -DCK_RTSCTS -OPT:Olimit=0 \
- -woff 1110,1552,1174 $(KFLAGS)" \
- irix6x KTARGET=$${KTARGET:-$(@)}
- #Build for those that have GCC instead of MIPSpro.
- #
- # Large File Support note: use the define _LARGEFILE_SOURCE to enable support
- # for files larger than 2GB. This may work on releases of Irix prior to
- # 6.5.xx. To verify, check the man page for fstat and verify that off_t is a
- # 64 bit value for an -n32 build. Also check the manpage for fseek and ftell
- # to verify that the fseek64 and ftell64 functions are provided. If so, then
- # LFS support should work and you can try adding -D_LARGEFILE_SOURCE to CFLAGS
- # for your selected Irix target.
- #
- irix65gcc:
- @echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5 with gcc'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -DSVR4 -DIRIX65 -D_LARGEFILE_SOURCE -DDIRENT -DHDBUUCP \
- -DNOGETUSERSHELL -DSELECT -DPWID_T=uid_t -DTCPSOCKET -DNOCOTFMC \
- -DCK_ANSIC -DCK_RTSCTS -DCK_NEWTERM -DCK_CURSES \
- $(KFLAGS) -O" "LIBS= -lcurses"
- # The 64-bit IRIX target works but presumably is no longer needed given the
- # large file support in the more portable and compact 32-bit version.
- irix65_64:
- @echo 'Making C-Kermit $(CKVER) 64-bit for SGI IRIX 6.5'
- @$(MAKE) "MAKE=$(MAKE)" LNKFLAGS="-Wl,-woff,84" \
- "KFLAGS=-DIRIX65 -64 -DCK_RTSCTS -OPT:Olimit=0 -woff 1110,1552,1174 \
- -DCK_64BIT $(KFLAGS)" \
- irix6x KTARGET=$${KTARGET:-$(@)}
- #Dumb down to MIPS-2 if building on R5000 or higher...
- irix65mips2:
- @echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5 MIPS-2'
- @$(MAKE) "MAKE=$(MAKE)" LNKFLAGS="-o32 -mips2 -Wl,-woff,84" \
- "KFLAGS=-DIRIX65 -DCK_RTSCTS -OPT:Olimit=0 -o32 -mips2 \
- -woff 1110,1552,1174 $(KFLAGS)" \
- irix6x KTARGET=$${KTARGET:-$(@)}
- #Special target that adds srp, ssl, and zlib support. This requires
- #that you have pkgsrc installed instead of Irix Freeware. See
- #NetBSD.org for pkgsrc for Irix. You will need to BUILD the srp_client
- #package yourself. Install it manually using the directions found
- #in the netbsds+ssl+srp+zlib target comments.
- irix65+ssl+srp+zlib:
- @echo 'Making C-Kermit $(CKVER) for IRIX 6.5 with gcc and SSL SRP ZLIB'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -DIRIX65 -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL -DSELECT \
- -DTCPSOCKET -DNOCOTFMC -DCK_NEWTERM -DPWID_T=uid_t -DCK_ANSIC \
- -I/usr/pkg/include -DCK_AUTHENTICATION -DCK_SRP -DPRE_SRP_1_4_5 \
- -DCK_RTSCTS -DCK_NCURSES -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DCK_SSL \
- -DLIBDES -DZLIB -DFNFLOAT -I/usr/pkg/include/openssl $(KFLAGS) -O" \
- "LIBS= -L/usr/pkg/lib -rpath /usr/pkg/lib -lncurses -lsrp -lgmp -ldes \
- -lssl -lkrypto -lcrypto -lcrypt -lz -lm"
- irix6x+krb5:
- @echo 'Includes fullscreen file display and Yellow Pages...'
- @echo 'Add -mips<n> to specify a particular hardware target.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
- -DCK_CURSES -DCK_NEWTERM -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET\
- -DSELECT -DCK_RTSCTS -O \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DCK_ENCRYPTION -DCK_DES \
- $(K5INC) $(K5INC)/krb5 $(KFLAGS)" \
- "LIBS = -lcurses $(K5LIB) -ldes425 -lkrb5 \
- -lcom_err -lcrypto -lcrypt -lgssapi_krb5" \
- "LNKFLAGS = -s $(LNKFLAGS)"
- irix65+krb5:
- @echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5'
- @$(MAKE) "MAKE=$(MAKE)" \
- LNKFLAGS="-Wl,-woff,84" \
- "KFLAGS=-DIRIX65 -DCK_RTSCTS -OPT:Olimit=0 -woff 1110,1552,1174 \
- $(KFLAGS)" \
- irix6x+krb5 KTARGET=$${KTARGET:-$(@)}
- #In case they type "make sys5"...
- sys5:
- $(MAKE) "MAKE=$(MAKE)" sys3 KTARGET=$${KTARGET:-$(@)}
- #Generic ATT System III or System V (with I&D space)
- sys3:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
- @echo 'or System V R2 or earlier...'
- @echo 'add -DNOMKDIR if mkdir is an undefined symbol.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOUNICODE -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL \
- -DNOINITGROUPS -DNOFTRUNCATE -DNOREALPATH -DNOLEARN $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
- #Generic ATT System III or System V (no I&D space)
- sys3nid:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
- @echo 'or System V R2 or earlier, no I&D space...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOREALPATH -DNOUNICODE -DNOSYSLOG -DNOSYMLINK \
- -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS ="
- #Generic ATT System III or System V R2 or earlier, "no void":
- #special entry to remove "Illegal pointer combination" warnings.
- sys3nv:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
- @echo 'or System V R2 or earlier...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DATTSV -DNOREALPATH -DNOUNICODE -DNOSYSLOG -DNOGETUSERSHELL \
- -DNOSYMLINK -DNOFTRUNCATE -DNOINITGROUPS -DNOLEARN \
- -Dvoid=int $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
- # AT&T 7300 UNIX PC. As of C-Kermit 6.1, many of these entries don't work
- # any more due to "Out of memory" or "Too many defines" errors during
- # compilation, at least not on systems without lots of memory. The sys3upcgc
- # entry works (using gcc) with optimization removed, and might also work
- # with optimization enabled on machines with larger memories.
- #AT&T 7300/UNIX PC (3B1) systems, sys3 but special handling for internal modem.
- #Link with the shared library -- the conflict with openi in shared library
- #is solved with -Dopeni=xopeni. Note that the xermit target can't be used
- #for the Unix PC; there is no select().
- sys3upc:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, shared lib...'
- @echo 'If shared lib causes trouble, use make sys3upcold.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DATT7300 -DNOMKDIR -DUSE_MEMCPY -DNOREALPATH -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOREDIRECT -DNOGFTIMER -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \
- "CC2 = ld /lib/crt0s.o /lib/shlib.ifile" "LNKFLAGS = -s"
- #AT&T 7300/Unix PC systems, minimum kermit for those with smaller amounts
- #of memory.
- sys3upcm:
- @echo Minimum interactive
- $(MAKE) "MAKE=$(MAKE)" sys3upc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOSPL -DNOFRILLS -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS \
- -DNOSYSLOG -DNOSETKEY -DNOREALPATH"
- #AT&T 7300/UNIX PC (3B1) systems, with curses support.
- #Curses and the shared library don't get along, so we don't use the
- #shared library. We need to include CK_NEWTERM to avoid a conflict
- #with curses and buffering on stdout. Merged with submission by
- #Robert Weiner/Programming Plus, rweiner@watsun.cc.columbia.edu.
- #We don't need -Dopeni=xopeni since we're not using the shared library,
- #but we keep it to be consistent with the other entries.
- sys3upcc:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DATT7300 -DNOREALPATH \
- -DCK_CURSES -DCK_NEWTERM -DNOMKDIR -DNOREDIRECT -DNOGFTIMER -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DUSE_MEMCPY -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \
- "LIBS = -lcurses" "LNKFLAGS = -s"
- #Like sys3upcc but for AT&T UNIX 3.51m (released as a patch on Fix Disk 2),
- #adds hardware flow control.
- att351m:
- $(MAKE) "MAKE=$(MAKE)" sys3upcc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DCK_RTSCTS -DUNIX351M"
- #As above but with gcc.
- att351gm:
- $(MAKE) "MAKE=$(MAKE)" sys3upcgc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DCK_RTSCTS -DUNIX351M"
- #AT&T 7300 UNIX PC (3B1), as above, but no newterm().
- sys3upcx:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DATT7300 -DNOREALPATH -DNOUNICODE -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DCK_CURSES -DNOMKDIR -DNOREDIRECT -DNOGFTIMER -DUSE_MEMCPY $(KFLAGS) \
- -Dopeni=xopeni" "LIBS = -lcurses -ltermcap" "LNKFLAGS = -s"
- #AT&T 7300/UNIX PC (3B1) systems, with curses and shared library support.
- sys3upcshcc:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, shared lib...'
- @echo 'With curses. Requires shcc.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DATT7300 -DNOMKDIR -DNOREALPATH -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DCK_NEWTERM -DCK_CURSES -DNOREDIRECT -DNOGFTIMER \
- -DUSE_MEMCPY -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \
- "LNKFLAGS = -i -s" "CC = shcc" "CC2 = shcc" "LIBS = -lcurses"
- #AT&T 7300/UNIX PC (3B1) systems, as above, no curses, but use gcc.
- sys3upcg:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOUNICODE -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOGFTIMER -DNOMKDIR -DNOREALPATH $(KFLAGS) -Dopeni=xopeni" \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s -shlib"
- #AT&T 7300/UNIX PC (3B1) systems, curses and gcc.
- #Optimization omitted -- add it back in if your machine has lots of memory.
- sys3upcgc:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOGFTIMER -DNOUNICODE \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DCK_CURSES -DCK_NEWTERM -DNOMKDIR -DNOREALPATH -DNOLEARN $(KFLAGS)" \
- "CC = gcc" "CC2 = gcc" "LIBS = -lcurses" "LNKFLAGS = -s"
- #AT&T 7300/UNIX PC (3B1) systems, special handling for internal modem.
- #No FULLSCREEN file transfer display (curses).
- sys3upcold:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT7300 -DNOMKDIR -DUSE_MEMCPY -DNOUNICODE -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOGFTIMER -DNOREDIRECT -DNOREALPATH $(KFLAGS) -O" "LNKFLAGS = -i"
- #As above, but with gcc. mininum features - fits on a 400K UNIX PC floppy
- #after compression with room to spare; add -DNOSHOW or other -DNOxxxx items
- #to reduce size even further.
- sys3upcgm:
- @echo Minimum interactive
- $(MAKE) "MAKE=$(MAKE)" sys3upcg KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DNOSPL -DNOFRILLS -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS \
- -DNOSETKEY $(KFLAGS)"
- #This target is designed to create a version with the most features possible
- #that, after compression, still fits on a 400K UNIX PC floppy.
- sys3upcgfd:
- @echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC floppy...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOSPL -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOGFTIMER -DNOREALPATH -Dopeni=xopeni \
- -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS -DNOSETKEY -DNOMKDIR $(KFLAGS)" \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s"
- #AT&T 6300 PLUS (warning, -O might make it run out of space).
- #NOTE: Remove -DHDBUUCP if not using Honey DanBer UUCP.
- att6300:
- @echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT6300 -DHDBUUCP -DNOFILEH -DNOREALPATH -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOUNICODE $(KFLAGS) -O -Ml -i" "LNKFLAGS = -i -Ml"
- #As above, but with curses support. Debugging disabled to prevent thrashing.
- att6300c:
- @echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT6300 -DHDBUUCP -DNOFILEH -DNOCSETS -DNOREALPATH \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DCK_CURSES -DNODEBUG -DNOUNICODE -DNOLEARN $(KFLAGS) -O -Ml -i" \
- "LNKFLAGS = -i -Ml" "LIBS = -lcurses"
- #AT&T 6300 PLUS with no curses, no debugging (about 34K smaller)
- # -Optimization saves about 20K too.
- att6300nd:
- @echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS, no debugging...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATT6300 -DHDBUUCP -DNODEBUG -DNOFILEH -DNOREALPATH \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOUNICODE -DNOLEARN $(KFLAGS) -O -i -Ml" "LNKFLAGS = -i -Ml"
- #AT&T 3B2 and maybe 3B20-series computers running AT&T UNIX System V R3.
- #This one was actually used to build C-Kermit 7.0 successfully on a 3B2/300.
- att3b2:
- @echo 'Making C-Kermit $(CKVER) for AT&T 3B2'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOREDIRECT -DUSE_MEMCPY \
- -DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOGFTIMER -DNOREALPATH -Dopeni=xopeni -DNOFRILLS -DNOLEARN \
- -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS -DNOSETKEY -DNOMKDIR $(KFLAGS)" \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -s"
- # The next two are likely not to work as-is.
- #AT&T 3B2, 3B20-series computers running AT&T UNIX System V.
- #This is just generic System V with Honey DanBer UUCP, so refer to sys3hdb.
- #Remove -DNONAWS if you can get away with it.
- att3bx:
- $(MAKE) "MAKE=$(MAKE)" sys3hdb KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DNONAWS -DNOTIMEVAL"
- # 3Bx with charsets (except Unicode) but no curses.
- att3bx1:
- @echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20'
- @echo 'with Honey DanBer UUCP no curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -DNOREDIRECT \
- -DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \
- -DNOHELP -DNODEBUG -DNOGFTIMER -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOREALPATH -DNOUNICODE -i" \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -i -s"
- #AT&T 3B2, 3B20-series computers running AT&T UNIX System V,
- #with fullscreen file transfer display.
- att3bxc:
- @echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20'
- @echo 'with Honey DanBer UUCP and curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DHDBUUCP -DNONAWS -DNOTIMEVAL $(KFLAGS) \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOREALPATH -DCK_CURSES -DCK_NEWTERM -DNOUNICODE -DNOLEARN -i -O" \
- "LNKFLAGS = -i" "LIBS=-lcurses"
- #3bx with curses but no charsets
- att3bxc3:
- @echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20'
- @echo 'with Honey DanBer UUCP with curses... no CSETS'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -DNOREDIRECT \
- -DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \
- -DNOHELP -DNODEBUG -DNOGFTIMER -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOREALPATH -DNOCSETS -DCK_CURSES -DCK_NEWTERM -i" \
- "CC = gcc" "CC2 = gcc" "LNKFLAGS = -i -s" "LIBS = -lcurses"
- #Any System V R2 or earlier with Honey DanBer UUCP (same as above)
- sys3hdb:
- @echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
- @echo 'or System V R2 or earlier with Honey DanBer UUCP...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DHDBUUCP -DNOREALPATH -DNOUNICODE -DNOLEARN \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- $(KFLAGS) -i -O" "LNKFLAGS = -i"
- #Sperry/UNISYS 5000 UTS V 5.2 (System V R2), Honey DanBer UUCP
- unisys5r2:
- @echo 'Making C-Kermit $(CKVER) for Sperry/UNISYS 5000 UTS V 5.2...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DUNISYS52 -DHDBUUCP -DNOREALPATH -DNOUNICODE \
- -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
- -DNOLEARN $(KFLAGS) -i -O" "LNKFLAGS = -i"
- #In case they say "make sys5hdb" instead of "make sys3hdb"...
- sys5hdb:
- $(MAKE) "MAKE=$(MAKE)" sys3hdb
- #Create the common header line for all hpux[5-11]* entries and above. This
- #extra entry is here because our header message length may differ for each
- #C-Kermit version. Don't use 'fold -s' for HP-UX 5.x - 7.x! This option is
- #available only for HP-UX 8.0 and above!
- hpux-header:
- @HPUX=`uname -r | sed -e 's/^[^1-9]*//' -e 's/\.00$$/.0/'` ; \
- [ "$(MESSAGE0)" ] && MESSAGE1="$(MESSAGE0)" ; \
- Message0='Making C-Kermit $(CKVER) for HP9000 HP-UX' ; \
- Message1=$${MESSAGE1:='without any extra compiler optimization'} ; \
- MessageH="$$Message0 $$HPUX" ; \
- case $$HPUX in \
- [567].*) echo "$$MessageH\n$$Message1" ;; \
- *.*) echo "$$MessageH $${Message1}$(MESSAGE1A)" | fold -s ;; \
- esac | sed -e 's/^ //' -e 's/ *$$//'
- # Peter E's updated HP-UX 5.xx entries Oct 2001.
- #HP-9000 500 HP-UX 5.xx, no TCP/IP.
- # Last known successful build: C-Kermit 8.0.206 2002/20/27.
- hpux0500:
- @MESSAGE0="no TCP/IP and no compiler optimization";\
- MESSAGE0=$${MESSAGE1:-$$MESSAGE0} \
- $(MAKE) hpux-header
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUX -DHPUX5 -DHPUXPRE65 -DNOREDIRECT -DDCLGETCWD \
- -DNOGETUSERSHELL -DNOGFTIMER -DNOSYSLOG -DNOTOMACROS -DNOLSTAT \
- -DNOSYMLINK -DNOINITGROUPS -DNOUNICODE -DNOLEARN -DNOLONGLONG \
- -DVOID=int -DCKVOID=int $(KFLAGS)" "LIBS = $(LIBS)" "LNKFLAGS = "
- #HP-9000 500 HP-UX 5.21 with Wollongong WIN/TCP 1.2 TCP/IP.
- #Requires /usr/wins/usr/include and /usr/lib/libnet.a from Wollongong.
- #Optimization skipped - takes forever. Really.
- # WARNING: this doesn't work if a file called "hpux0500" is on the disk.
- # Last known successful build: C-Kermit 8.0.206 2002/20/27.
- hpux0500wintcp:
- @MESSAGE1="with WIN/TCP but without any extra compiler optimization" \
- $(MAKE) hpux0500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = -DTCPSOCKET -DHPUX5WINTCP -DINADDRX -DNO_DNS_SRV \
- -DNOMHHOST -DVOID=int -DCKVOID=int -DNOHADDRLIST -DNOLONGLONG \
- -I/usr/wins/usr/include $(KFLAGS)" "LIBS = /usr/lib/libnet.a"
- #HP-UX 6.5, short filenames, no network and no curses support.
- #ckcpro, ckuusr, ckuus3 and others are broken out because they make the
- #optimizer run away. Note that the XERMIT target does not work with HP-UX 6.5!
- #
- #If you get compiler warnings like:
- #'Switch table overflow. Try the -Wc,-Nw option.' (for ckcuni.c, or
- #other files) increase the '...' value in '-Wc,-Nw...'! The default maximum
- #switch table stack (-Nw) is 250 table entries. ckcuni.c from Oct 16 2009
- #needs 257 table entries (C-Kermit Version "9.0.299").
- #OK: 2010/03/26
- hpux0650:
- @$(MAKE) hpux-header
- @MESSAGE2=$${MESSAGE2:-'and NO network'}; \
- echo "supporting: NO long filenames $$MESSAGE2."
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
- ckuusr.$(EXT) ckuxla.$(EXT) ckcftp.$(EXT) ckcpro.$(EXT) \
- "CFLAGS = -DHPUX -DHPUX6 -DSIG_V -DNOSYSLOG -DNOSELECT -DFNFLOAT \
- -DDCLGETCWD -DNOGETUSERSHELL -DNO_DNS_SRV -DNOLEARN -DNOLONGLONG \
- $(KFLAGS)"
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUX -DHPUX6 -DSIG_V -DNOSYSLOG -DNOSELECT -DFNFLOAT \
- -DDCLGETCWD -DNOGETUSERSHELL -DNO_DNS_SRV -DNOLEARN -DNOLONGLONG \
- $(KFLAGS) -Wc,-Nw260 $(OFLAGS)" "LNKFLAGS = -s" "LIBS = -lm $(LIBS)"
- #Exactly as above, plus curses:
- #OK: 2009/10/06
- hpux0650c:
- @MESSAGE2="and NO network but with curses" \
- $(MAKE) hpux0650 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = -DCK_CURSES $(KFLAGS)" \
- "LIBS = -lcurses"
- #Exactly as above, plus curses + network:
- #OK: 2009/10/02
- hpux0650tcpc:
- @MESSAGE2="but with curses and with TCP/IP" \
- $(MAKE) hpux0650 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DCK_CURSES -DTCPSOCKET -DNOHADDRLIST \
- -DINTSELECT -DNOCKGETFQHOST $(KFLAGS)" \
- "LIBS=-lcurses"
- #Exactly as hpux0650 but with compiler optimization:
- #OK: 2009/10/06
- hpux0650o:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0650 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O"
- #Exactly as hpux0650c but with compiler optimization:
- #OK: 2009/10/06
- hpux0650oc:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0650c KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O"
- #Exactly as hpux0650tcpc but with compiler optimization:
- #OK: 2009/10/06
- hpux0650otcpc:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0650tcpc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O"
- #Take this as startup entry for all 'non-optimized' files under HP-UX 7.x!
- #Make sure we don't call it with the '-O' option because this will blow up
- #the compiler!
- #OK: 2009/09/30
- hpux0700noopt:
- @case "$(CFLAGS)" in \
- *-O*) echo "Don't use CFLAGS= -O here!" ;; \
- *) $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- ckuusr.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
- ckuus6.$(EXT) ckuus7.$(EXT) ckuxla.$(EXT) \
- ckcuni.$(EXT) ckcftp.$(EXT) ckcpro.$(EXT) \
- ;; \
- esac
- #HP-UX 7.0, no long filenames, no network support, no curses.
- #If you get compiler warnings like:
- #'Switch table overflow. Try the -Wc,-Nw option.' (for ckcuni.c, or
- #other files) increase the '...' value in '-Wc,-Nw...'! The default maximum
- #switch table stack (-Nw) is 250 table entries. ckcuni.c from Oct 16 2009
- #needs 257 table entries (C-Kermit Version "9.0.299").
- #OK: 2010/10/26
- hpux0700sf:
- @$(MAKE) hpux-header
- @echo 'supporting: NO long filenames, NO network, NO curses.'
- $(MAKE) hpux0700noopt KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUX -DHPUX7 -DSIG_V -DNOGETUSERSHELL -DFNFLOAT \
- -DNO_DNS_SRV $(KFLAGS) -Wc,-Nw260"
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUX -DHPUX7 -DSIG_V -DNOGETUSERSHELL -DFNFLOAT \
- -DNO_DNS_SRV $(KFLAGS) -Wc,-Nw260 $(OFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lm $(LIBS)"
- #Exactly as hpux0700sf but with compiler optimization:
- #OK: 2009/09/30
- hpux0700osf:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0700sf KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O"
- #HP-UX 7.0, short filenames, but with tcp/ip and curses.
- #To use this, you must have bought the ARPA Services Product from HP, and you
- #must have /usr/lib/libBSD.a.
- #
- #If you get compiler warnings like:
- #'Symbol table overflow. Try the -Wc,-Ns option.' (as for ckuus4.c or
- #other files) increase the '...' value in '-Wc,-Ns...'! The default maximum
- #symbol table size (-Ns) is 2000 table entries. ckuus4.c from Mar 12 2010
- #needs 2031 table entries (C-Kermit Version "9.0.299").
- #OK: 2010/03/24
- hpux0700sftcpc:
- @$(MAKE) hpux-header
- @echo 'supporting: NO long filenames, \c'
- @echo 'but with networking, curses, HDB uucp...'
- $(MAKE) hpux0700noopt KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V \
- -DCK_REDIR -DCK_RTSCTS -DCK_CURSES -DNOGETUSERSHELL -DFNFLOAT \
- -DNO_DNS_SRV -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \
- -DNOLONGLONG $(KFLAGS) -Wc,-Nw260,-Ns2040"
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V \
- -DCK_REDIR -DCK_RTSCTS -DCK_CURSES -DNOGETUSERSHELL -DFNFLOAT \
- -DNO_DNS_SRV -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \
- -DNOLONGLONG $(KFLAGS) -Wc,-Nw260,-Ns2040 $(OFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lm -lBSD -lcurses"
- #Exactly as above but with compiler optimization:
- #OK: 2009/09/30
- hpux0700osftcpc:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0700sftcpc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O"
- #HP 9000 series 300/800 HP-UX 7.0, long filenames, network support, HDB uucp,
- #but NO curses. See comments in hpux0700sftcpc about TCP/IP support.
- #
- #If you get compiler warnings like:
- #'Symbol table overflow. Try the -Wc,-Ns option.' (as for ckuus4.c or
- #other files) increase the '...' value in '-Wc,-Ns...'! The default maximum
- #symbol table size (-Ns) is 2000 table entries. ckuus4.c from Mar 12 2010
- #needs 2031 table entries (C-Kermit Version "9.0.299").
- #OK: 2010/03/24
- hpux0700lfn:
- @$(MAKE) hpux-header
- @echo 'supporting: long filenames, networking, HDB uucp$(MESSAGE2)...'
- $(MAKE) hpux0700noopt KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V -DFNFLOAT \
- -DNOGETUSERSHELL -DNOSETBUF -DCK_REDIR -DCK_RTSCTS -DLONGFN \
- -DNO_DNS_SRV -DDIRENT -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \
- -DNOLONGLONG $(KFLAGS) -Wc,-Nw260,-Ns2040"
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V -DFNFLOAT \
- -DNOGETUSERSHELL -DNOSETBUF -DCK_REDIR -DCK_RTSCTS -DLONGFN \
- -DNO_DNS_SRV -DDIRENT -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \
- -DNOLONGLONG $(KFLAGS) -Wc,-Nw260,-Ns2040 $(OFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lm -lBSD $(LIBS)"
- #Exactly as above + curses.
- #OK: 2009/09/30
- hpux0700lfnc:
- @MESSAGE2=', curses' \
- $(MAKE) hpux0700lfn KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = -DCK_CURSES $(KFLAGS)" \
- "LIBS = -lcurses"
- #Exactly as above hpux0700lfn but with compiler optimization:
- #OK: 2009/09/30
- hpux0700olfn:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0700lfn KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O"
- #Exactly as above hpux0700lfnc but with compiler optimization:
- #OK: 2009/09/30
- hpux0700olfnc:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0700lfnc KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O"
- #HP 9000 Series 300 or 400, HP-UX 8.0, long filenames and TCP/IP support.
- #This one should also work on 700/800, but without PA-specific optimization.
- #In case -DCK_RTSCTS and -DCK_REDIR make trouble, remove them.
- #NOTE: ckcpro.c, ckuusr.c and ckuus3.c blow up the optimizer, so don't optimize
- #them.
- #For HP-UX 8.0 on Motorola CPUs, you might have to reinstall your kernel with
- #maxdsiz >= 0x03000000. But if physical memory is small, that still will not
- #help much.
- #OK: 2009/10/01
- hpux0800:
- @$(MAKE) hpux-header
- @MESSAGE3=$${MESSAGE3:='TCP/IP'}; \
- echo "supporting: long filenames, $$MESSAGE3, HDB UUCP$(MESSAGE2)..."
- $(MAKE) -B "CC=$(CC)" "CC2=$(CC2)" KTARGET=$${KTARGET:-$(@)} \
- ckcpro.$(EXT) ckuusr.$(EXT) ckuus3.$(EXT) \
- "CFLAGS = -DCK_REDIR -DHPUXDEBUG -DHPUX -DHPUX8 -DRENAME -DSIG_V \
- -DNOSETBUF -DDIRENT -DCK_RTSCTS -DSTERMIOX -DLONGFN -DTCPSOCKET \
- -DHDBUUCP -DNO_DNS_SRV -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT \
- -DNOLONGLONG $(KFLAGS)"
- $(MAKE) -B "CC=$(CC)" "CC2=$(CC2)" xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DCK_REDIR -DHPUXDEBUG -DHPUX -DHPUX8 -DRENAME -DSIG_V \
- -DNOSETBUF -DDIRENT -DCK_RTSCTS -DSTERMIOX -DLONGFN -DTCPSOCKET \
- -DHDBUUCP -DNO_DNS_SRV -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT \
- -DNOLONGLONG -DNODCLENDUSERSHELL $(KFLAGS) $(OFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lm -lBSD $(LIBS)"
- #Exactly as above hpux0800 + curses.
- #OK: 2009/10/01
- hpux0800c:
- @MESSAGE2=', curses' \
- $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) -DCK_CURSES" "LIBS = -lcurses"
- #HP 9000 HP-UX 8.0, no TCP/IP because /usr/lib/libBSD.a can't be found,
- #or TCP/IP header files missing.
- #OK: 2009/10/01
- hpux0800notcp:
- @MESSAGE3='NO network, NO curses' \
- $(MAKE) "MAKE=$(MAKE)" hpux0800 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) -UTCPSOCKET"
- #Now the same as above hpux0800 but with compiler optimization
- #OK: 2009/10/01
- hpux0800o:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O"
- #Exactly as above hpux0800 + curses and with compiler optimization.
- #OK: 2009/10/01
- hpux0800oc:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) hpux0800c KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O" "LIBS = -lcurses"
- #Exactly as above hpux0800notcp but with compiler optimization
- #OK: 2009/10/01
- hpux0800onotcp:
- @MESSAGE1="with compiler optimization" \
- $(MAKE) "MAKE=$(MAKE)" hpux0800notcp KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -O"
- #HP 9000 Series 700 or 800, HP-UX 8.0, long filenames and TCP/IP support.
- # Like the previous entries, but with PA-RISC-specific optimization.
- #OK: 2009/10/01
- hpux0800pa:
- @MESSAGE1="with PA-RISC-specific optimization" \
- $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) +Obb1100"
- #As above, but with curses.
- #OK: 2009/10/01
- hpux0800pac:
- @MESSAGE1="with PA-RISC-specific optimization" \
- $(MAKE) hpux0800c KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) +Obb1100"
- #As above, but compiled with GCC 2.3.3.
- #OK: 2009/10/01
- hpux0800pagcc:
- @MESSAGE1='using the gcc compiler' \
- $(MAKE) hpux0800 KTARGET=$${KTARGET:-$(@)} \
- "CC=gcc" "CC2=gcc" "KFLAGS = -funsigned-char $(KFLAGS)"
- #HP-UX 9.0, 9.01, 9.03, 9.04, 9.05, 9.07, 9.10 ..., + TCP/IP + curses, fully
- #configured. Use this entry with the restricted compiler: no optimization, no
- #ANSI support. If you get unresolved sockets library references at link time,
- #then try adding -lBSD to LIBS, or else remove -DTCPSOCKET to build a version
- #without TCP/IP support.
- #
- #Please note that we have to add the compiler option +DA1.0/+DA1.1 to avoid
- #core-dumps for large arguments in IF MATCH. The man page says these options
- #are default but C-Kermit dumps core without them! Therefore keep them
- #untouched. If you want to overwrite or disable the +DA1.0/+DA1.1 option use
- #'make hpux0900 OFLAGS=...'. An other possibility would be to create a new
- #kernel with maxssiz >= 0x01185000 (default maxssiz=0x00800000).
- #OK: 2009/09/24
- hpux0900:
- @MESSAGE1A='. Read hpux0900 entry comments if you have trouble.' \
- $(MAKE) hpux-header
- @case `uname -m` in \
- */[34]*) KFLAGS='-DNOLONGLONG $(KFLAGS)' ;; \
- */7*) AFLAGS='+DA1.1' ;; \
- */8*) AFLAGS='+DA1.0' ;; \
- esac ; \
- OFLAGS=$${OFLAGS:-$$AFLAGS} ; \
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DHPUXDEBUG -DHPUX9 -DSTERMIOX -DDIRENT -DUTIMEH \
- -DNOSETBUF -DCK_CURSES -DTCPSOCKET -DRENAME -DCK_REDIR -DLONGFN \
- -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT \
- -DNODCLENDUSERSHELL $$KFLAGS $$OFLAGS" \
- "LNKFLAGS = -s" "LIBS = -lm -lcurses" "CC=$(CC)" "CC2=$(CC2)"
- #Like hpux0900, but for the "value-added" compiler on all HP 9000 models.
- #Adds optimization and ANSI compilation:
- # +O2 makes smaller executable (= -O = Level-1 and global optimization)
- # +O3 adds interprocedural global optimization, makes bigger executable.
- # Please note: To support long-long we would need compiler switch '-Ae' but
- # this one works only on Risc systems. But the equivalant compiler flags
- # '-Aa -D_HPUX_SOURCE +e' works for Motorola and Risc.
- # If optimization fails on some modules, you can add:
- # +Obb<n>, +Olimit <n>, or +Onolimit, depending on your cc version,
- # where <n> is a number, e.g. +Obb1200. In other words, if you get optimizer
- # warnings, add (for example) +Obb1200; if you still get optimizer warnings,
- # increase the number. Repeat until warnings go away. If your compiler
- # permits it, use +Onolimit. If optimizer blows up on ckcpro.c, see next entry.
- # Reportedly, on some configurations, such as HP9000/425e or /340, perhaps
- # depending on the amount of main memory, this entry might fail no matter what
- # you do ("Out of Memory", "cc: Fatal error in /lib/c.c1", etc). In that case
- # use "make hpux0900" (no "o").
- #OK: 2009/09/24
- hpux0900o:
- @MESSAGE1=$${MESSAGE1:-"with compiler optimization"} \
- $(MAKE) hpux0900 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) -Aa -DCK_ANSIC -D_HPUX_SOURCE +O2 +e"
- # For HP-UX 9.0 on Motorola CPUs, optimization of ckcpro.c tends to blow up
- # the compiler. You might have to reinstall your kernel with maxdsiz >=
- # 0x03000000. But if physical memory is small, that still will not help much.
- # In that case, use this entry to skip optimization of ckcpro.c. But for
- # C-Kermit 8.0.208 you need a kernel with maxdsiz >= 0x02000000 to compile an
- # optimized ckcftp.c.
- # Please note: To support long-long we would need compiler switch '-Ae' but
- # this one works only on Risc systems. But the equivalant compiler flags
- # '-Aa -D_HPUX_SOURCE +e' works for Motorola and Risc.
- hpux0900m68ko:
- @MESSAGE1='without compiler optimization for ckcpro.$(EXT) ...' \
- $(MAKE) hpux-header
- $(MAKE) ckuusr.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) \
- ckcftp.$(EXT) ckcpro.$(EXT) \
- "CFLAGS = -DHPUXDEBUG -DHPUX9 -DSTERMIOX -DDIRENT \
- -DNOSETBUF -DCK_CURSES -DTCPSOCKET -DRENAME -DCK_REDIR -DLONGFN \
- -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT $(KFLAGS)"
- @echo
- @MESSAGE1="with compiler optimization for the rest" \
- $(MAKE) hpux0900 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) -Aa -DCK_ANSIC -D_HPUX_SOURCE +O2 +e"
- # Old name for hpux0900m68ko.
- hpux0900mot:
- $(MAKE) hpux0900m68ko KTARGET=$${KTARGET:-$(@)} "KFLAGS = $(KFLAGS)"
- #Like hpux0900o but with additional model-700/800-specific optimizations.
- # +ESlit = consolidate strings in read-only memory.
- # +ESfsc = inline millicode calls when comparing pointers.
- hpux0900o700:
- @echo 'If you get optimizer warnings \c'
- @echo 'try "make hpux0900o700 KFLAGS=+Obb1200"'
- @MESSAGE1="with PA-RISC-specific optimizations" \
- $(MAKE) hpux0900o KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) +ESlit +ESsfc"
- #HP-UX 9.0, 9.01, 9.03, 9.04, 9.05, 9.07, 9.10 ..., + TCP/IP + curses, fully
- #configured, built with gcc, all models except 800 series.
- #You might need to add the include path for gcc headers, for example:
- # 'KFLAGS=-I/usr/gnu/lib/gcc-lib/hppa1.1-hp-hpux/2.4.5/include/'
- hpux0900gcc:
- @MESSAGE1='using the gcc compiler' \
- $(MAKE) hpux0900 KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "KFLAGS = -DCK_ANSIC $(KFLAGS)" \
- "OFLAGS = -funsigned-char -O2 $(OFLAGS)"
- #HP-9000 HP-UX 10.0 + TCP/IP + curses, fully configured.
- #Use with restricted (bundled) compiler: no optimization, no ANSI support.
- #libcurses needed for fullscreen file xfer display in HP-UX 10.00 and 10.01.
- #libHcurses (NOT libcurses!) for fullscreen display, to work around fatal bugs
- #in HP-UX 10.10 and 10.20 curses. Maybe we could use lcurses for 10.30, since
- #the 10.10 curses problem is supposedly fixed in 10.30.
- # +DA1.0 = Generate PA-RISC 1.0 code that runs on both 700 and 800 models.
- # +DA1.1 = Generate PA-RISC 1.1 code that runs on both 700 and 800 models.
- # Note that HP-UX 10.20 and upwards do not support PA-RISC 1.0 systems.
- # And that as of Dec 2001, 11.00 and 11.11 are PA-only and 11.20 is IA64-only.
- # Later 11.2x releases are expected to be for both. Architecture can be
- # determined with the model command, at least in 10.20 and later...
- #For future releases, we need to include +DA1.1 for PA builds, so that a
- #binary built on PA 2.0 will still work on PA 1.1 machines, whereas +DA1.1
- #must NOT be included for IA64 builds.
- #4 Jan 2006 - Added Large File Support (LFS). Large files (>2GB) are
- #possible in HP-UX 10.20 and later. The only change is to add:
- # -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
- #to KFLAGS. These should be harmless in 10.00 and 10.10, if any of examples
- #of those still exist, but I have no way to test this hypothesis.
- #OK: 2009/11/16
- hpux1000:
- @$(MAKE) hpux-header
- @LIBS='-lHcurses' ; \
- AFLAGS='+DA1.1' ; \
- case `uname -r` in \
- [AB].10.0*) KFLAGS='-DHPUX1000 $(KFLAGS)' ; \
- AFLAGS='+DA1.0' ; LIBS='-lcurses' ;; \
- [AB].10.1*) KFLAGS='-DHPUX1010 -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].10.2*) KFLAGS='-DHPUX1020 -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].10.3*) KFLAGS='-DHPUX1030 -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].10.?*) KFLAGS='-DHPUX10XX -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].11.0*) KFLAGS='-DHPUX1100 -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].11.1*) KFLAGS='-DHPUX1100 -D__HP_CURSES $(KFLAGS)' ; \
- ;; \
- [AB].11.?*) KFLAGS='-DHPUX1100 -D__HP_CURSES $(KFLAGS)' ; \
- AFLAGS='' ; LIBS='-lcurses' ;; \
- esac ; \
- OFLAGS=$${OFLAGS:-$$AFLAGS} ; \
- $(MAKE) "SHELL=/usr/bin/sh" xermit KTARGET=$${KTARGET:-$(@)} \
- "CC=$(CC)" "CC2=$(CC2)" \
- "CFLAGS = -DHPUX10 -DDIRENT -DSTERMIOX -DCK_DSYSINI -DHDBUUCP \
- -DCK_CURSES -DCK_WREFRESH -DTCPSOCKET -DCK_REDIR -DRENAME -DFNFLOAT \
- -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 \
- $$KFLAGS $$OFLAGS" \
- "LNKFLAGS=-s $(LNKFLAGS)" "LIBS = -lm $$LIBS $(KLIBS)"
- # This is a kludge, copying hpux0900gcc and adapting hpux1000
- # (add CC and CC2, drop the A1.[0||1])
- # Builds w/ no compiler warnings but minimally tested.
- #
- #OK: 2009/09/21
- hpux1000gcc:
- @MESSAGE1="using the gcc compiler $(MESSAGE1)" \
- $(MAKE) hpux1000 KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
- "KFLAGS = $(KFLAGS)" "OFLAGS = -DCK_ANSIC -funsigned-char -O2"
- # Trusted HP-UX 10
- # echo KFLAGS=$(KFLAGS) YTARGET YTARGET=$(YTARGET) $(XTARGET) ;
- hpux1000t:
- @case "$(KTARGET)" in \
- *+openssl | *+ssl) \
- KENTRY=hpux1000o+openssl ;; \
- *gcc) \
- KENTRY=hpux1000gcc ;; \
- *o+) KENTRY=hpux1000o+ ;; \
- *o) KENTRY=hpux1000o ;; \
- *) KENTRY=hpux1000 ;; \
- esac ; \
- MESSAGE1="and support for 'Trusted HP-UX'" \
- $(MAKE) $$KENTRY KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS = $(KFLAGS) -DHPUX10_TRUSTED" "KLIBS=-lsec"
- hpux1000to:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
- hpux1000to+:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
- hpux1000tgcc:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
- hpux1000to+ssl hpux1000to+openssl:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
- hpux1000tgcc+ssl hpux1000tgcc+openssl:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
- #HP-9000 HP-UX 10.00 and higher with ANSI prototyping and optimization.
- #PA-RISC only, no Motorola or other hardware is support in HP-UX 10.00++.
- #The unbundled optional compiler is required.
- #Your path should start with /opt/ansic/bin.
- # -Wl,-Fw = Remove stack unwind table (info used by debuggers).
- # +O2 makes a smaller executable (= -O = Level-1 and global optimization).
- # +O3 adds interprocedural global optimization, makes a bigger executable.
- # +Onolimit allows all modules to be optimized, no matter how complex. But:
- # (a) +Onolimit does not seem to always be there in HP-UX 10.00, and:
- # (b) some modules might take hours on low-memory and/or slow systems.
- # The following are PA-RISC-specific optimizations:
- # +ESlit = Consolidate strings in read-only memory.
- # +ESfsc = Inline millicode calls when comparing pointers.
- # You might need to configure your kernel for a maxdsiz of 0x0B000000 (176MB)
- # or greater to prevent the optimizer from running out of space.
- # December 2001: +ESlit +ESsfc removed because not supported on IA64.
- # Somebody who cares can use 'model' to see whether it's PA-RISC or IA64
- # and include the architecture-specific optimization flags. Also note:
- # +DA1.1 is PA-only. If this is included in in HP-UX 11.00 or later,
- # then +DS2.0 should be included too (but don't use +DS2.0 without +DA1.1,
- # or else the binary won't run on older PA hardware).
- #OK: 2009/09/21
- hpux1000o:
- @case `uname -m` in \
- ia64) ;; \
- *) MFLAGS='+ESlit +ESsfc' ;; \
- esac ; \
- MESSAGE1="with PA-RISC-specific optimizations $(MESSAGE1)" \
- $(MAKE) "SHELL=/usr/bin/sh" "PATH=/opt/ansic/bin:$$PATH" hpux1000 \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = $(KFLAGS) \
- -Ae -D_HPUX_SOURCE -DCK_ANSIC -DUTIMEH \
- +O2 -Wl,-Fw $$MFLAGS"
- #Like hpux1000o but with "+Onolimit".
- #On 700 series set kernel parameter maxdsiz >= 0x0D000000 (=208MB).
- #Takes a long time.
- hpux1000o+:
- @MESSAGE1="and +Onolimit $(MESSAGE1)" KTARGET=$${KTARGET:-$(@)} \
- $(MAKE) hpux1000o \
- "KFLAGS = $(KFLAGS) +Onolimit"
- #HP-UX 10.xx + 11.xx with optimizing ANSI compiler and OpenSSL.
- #Define SSLLIB and SSLINC appropriately for your OpenSSL installation.
- #To overwrite the default SSLLIB and SSLINC settings you can also use the
- #command-line variable KSSLLIB and KSSLINC like:
- #make hpux1000o+openssl KSSLLIB=-L/opt/openssl/lib KSSLINC=-I/...
- #Ditto for the Zlib location.
- #This entry works for C-Kermit 8.0.206 on HP-UX 10.20 + 11.11
- #with OpenSSL 0.9.6 + 0.9.7
- #NOTE: an ANSI C compiler is required for the SSL interface. If you don't
- #have the HP Optimizing ANSI compiler, see the hpux1000gcc+openssl target
- #below.
- hpux1000o+ssl hpux1000o+openssl:
- @case "$(KTARGET)" in \
- *gcc+*) \
- KENTRY=hpux1000gcc ;; \
- *) KENTRY=hpux1000o ;; \
- esac ; \
- case "$(KTARGET)" in \
- *-zlib*) \
- DZLIB= LZLIB= ;; \
- *) DZLIB=-DZLIB LZLIB='-L/opt/zlib/lib -lz' ;; \
- esac ; \
- SSLINC=$${KSSLINC:-$(SSLINC)}; \
- SSLLIB=$${KSSLLIB:-$(SSLLIB)}; \
- MESSAGE1="and with OpenSSL $(MESSAGE1)" \
- $(MAKE) $$KENTRY KTARGET=$${KTARGET:-$(@)} \
- KFLAGS="-DCK_AUTHENTICATION -DCK_SSL -DOPENSSL_097 $$DZLIB \
- $$SSLINC $(KFLAGS)" \
- KLIBS="$(KLIBS) \
- $$SSLLIB -lssl -lcrypto \
- $$LZLIB \
- "
- # Ditto but without Zlib:
- hpux1000o+ssl-zlib hpux1000o+openssl-zlib:
- @MESSAGE1="but without Zlib $(MESSAGE1)" \
- $(MAKE) hpux1000o+ssl KTARGET=$${KTARGET:-$(@)}
- #HP-UX 10.00 or higher with OpenSSL 0.9.7. Compiled with gcc.
- #From Chris Chaney, NEC America Inc. His instructions:
- # (1) Install gcc version 3.2.3 & binutils version 2.13.2
- # (used binary depot from http://hpux.cs.utah.edu/)
- # (2) Install gcc make version 3.80 from http://hpux.cs.utah.edu/
- #
- # or: gcc 2.9.2000-12-1 from "Linux to hp-ux 11.0/11i porting kit version 1.0
- # (2CD)" free from: http://www.software.hp.com
- #
- # (3) Install openSSL version 0.9.7b from http://www.software.hp.com
- # (4) Install flex version 2.5.4 from http://hpux.cs.utah.edu/
- # (5) Install gmp version 3.1.1 from http://hpux.cs.utah.edu/
- #
- #Note from Peter Eichhorn, assyst Munich. It works also without gcc make!
- hpux1000gcc+ssl hpux1000gcc+openssl:
- $(MAKE) hpux1000o+openssl KTARGET=$${KTARGET:-$(@)}
- # Ditto but without Zlib:
- hpux1000gcc+ssl-zlib hpux1000gcc+openssl-zlib:
- $(MAKE) hpux1000o+openssl-zlib KTARGET=$${KTARGET:-$(@)}
- # Same for HP-UX 11
- hpux1100o+ssl hpux1100o+openssl:
- $(MAKE) hpux1000o+openssl KTARGET=$${KTARGET:-$(@)}
- #OK: 2009/09/26
- hpux1100gcc+ssl hpux1100gcc+openssl:
- $(MAKE) hpux1000gcc+openssl KTARGET=$${KTARGET:-$(@)}
- hpux1100o+ssl-zlib hpux1100o+openssl-zlib:
- $(MAKE) hpux1000o+openssl-zlib KTARGET=$${KTARGET:-$(@)}
- hpux1100gcc+ssl-zlib hpux1100gcc+openssl-zlib:
- $(MAKE) hpux1000gcc+openssl-zlib KTARGET=$${KTARGET:-$(@)}
- # HP-UX 11
- # Note: these are 32-bit builds even on IA64.
- # Adding +DD64 to CFLAGS produces 64-bit object files,
- # but the linker fails to find the needed 64-bit libs.
- #OK: 2009/09/26
- hpux1100:
- $(MAKE) hpux1000 KTARGET=$${KTARGET:-$(@)}
- #OK: 2009/09/26
- hpux1100o:
- $(MAKE) hpux1000o KTARGET=$${KTARGET:-$(@)}
- hpux1100o+:
- $(MAKE) hpux1000o+ KTARGET=$${KTARGET:-$(@)}
- #OK: 2009/09/26
- hpux1100gcc:
- $(MAKE) hpux1000gcc KTARGET=$${KTARGET:-$(@)}
- # Trusted HP-UX 11
- hpux1100t:
- $(MAKE) hpux1000t KTARGET=$${KTARGET:-$(@)}
- hpux1100to:
- $(MAKE) hpux1000to KTARGET=$${KTARGET:-$(@)}
- hpux1100to+:
- $(MAKE) hpux1000to+ KTARGET=$${KTARGET:-$(@)}
- hpux1100tgcc:
- $(MAKE) hpux1000tgcc KTARGET=$${KTARGET:-$(@)}
- hpux1100to+ssl hpux1100to+openssl:
- $(MAKE) hpux1000to+openssl KTARGET=$${KTARGET:-$(@)}
- hpux1100tgcc+ssl hpux1100tgcc+openssl:
- $(MAKE) hpux1000tgcc+openssl KTARGET=$${KTARGET:-$(@)}
- #Regulus on CIE Systems 680/20
- cie:
- @echo 'Making C-Kermit $(CKVER) for CIE Systems 680/20 Regulus...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DATTSV -DNOFILEH -DCIE -DNOLEARN $(KFLAGS) -O" "LNKFLAGS ="
- # Android.
- android:
- @echo Please use \"make -f android.mk\" to build C-Kermit for Android.
- # Linux 1.2 or later with gcc, dynamic libraries, ncurses, TCP/IP.
- #
- # If your Linux system has curses rather than ncurses, use the linuxc
- # entry, or if that doesn't work, linuxnc.
- #
- # The Kermit "large memory model" is used by default to configure big packet
- # and script buffers, etc. For small-memory or limited-resource systems,
- # "make linux KFLAGS=-DNOBIGBUF".
- #
- # -DLINUXFSSTND (Linux File System Standard 1.2) gives UUCP lockfile /var/lock
- # with string pid. Remove this to get /usr/spool/uucp with int pid, used in
- # very early Linux versions. FSSTND 1.2 also says that the PID string in the
- # UUCP lock file has leading spaces. This is a change from FSSTND 1.0, which
- # used leading zeros. Add -DFSSTND10 to support FSSTND 1.0 instead of 1.2.
- # I hope subsequent editions of the file-system standard did not change these
- # again.
- #
- # Add -DOLINUXHISPEED (Old Linux High Speed support) to turn on an ugly kludge
- # in Linux 1.0 and earlier to support speeds of 57600 and 115200. Extremely
- # old Linux systems (pre-0.99pl15) will not support this. If OLINUXHISPEED is
- # not defined, then only the standard POSIX termios methods of setting the port
- # speed will be used, and in this case speeds can be as high as 460800 in most
- # modern Linux versions.
- #
- # -DCK_POSIX_SIG (POSIX signal handling) is good for Linux releases back to at
- # least 0.99.14; if it causes trouble for you, remove it from the CFLAGS.
- #
- # -pipe removes the need for temp files - remove it if it causes trouble.
- #
- # -funsigned-char makes all characters unsigned, as they should have been
- # in the first place.
- #
- # Add -DCK_DSYSINI if you want a shared system-wide init file.
- #
- # See http://www.columbia.edu/kermit/ckubwr.html about -DNOCOTFMC.
- # Better still, should read the entire Linux section of that document.
- #
- # The "linuxa" entry can be referenced directly on LIBC systems, but not
- # GLIBC, where -lcrypt is required. The "make linux" entry should normally
- # be used for all builds on all Linux distributions unless you have special
- # requirements, in which case keep reading. CK_NEWTERM added after 7.0b04
- # due to new complaints about ncurses changing buffering of tty.
- linuxa:
- @echo 'Making C-Kermit $(CKVER) for Linux 1.2 or later...'
- @echo 'IMPORTANT: Read the comments in the linux section of the'
- @echo 'makefile if you have trouble.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O0 -DLINUX -fcommon -pipe -funsigned-char \
- -DFNFLOAT -DCK_POSIX_SIG \
- -DCK_NEWTERM -DTCPSOCKET -DLINUXFSSTND -DNOCOTFMC -DPOSIX \
- -DUSE_STRERROR $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(LIBS) -lm -lcurses"
- # As above but with profiling
- linuxp:
- $(MAKE) linuxa KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS) -pg" \
- "LIBS=-pg -lcrypt -lresolv"
- #Linux. Completely new target: 18 January 2016.
- #No more looking in 100 different places for libraries, let ld do it,
- #since it knows what libraries it's going to use.
- #If this target fails to work somewhere, use the 'linux-2015' target just
- #below this one.
- #
- #This entry should work for any Linux distribution on any platform,
- #32-bit or 64-bit, except for extremely ancient ones. Automatically detects:
- # . curses, ncurses, or no curses
- # . Old versus new pty handling (new == glibc 2.1++)
- # . Presence or absence of libcrypt and <crypt.h>
- # . Presence or absence of libresolv
- # . Presence of various serial port locking schemes
- # . Transitional Long File API for 32-bit platforms (SUS V2 UNIX 98 LFS).
- #
- #Long file support for 32-bit builds added in 8.0.212 - if features.h contains
- #__USE_LARGEFILE64 then we set the flags that must be set before reading any
- #header files; on 32-bit platforms such as i386, this produces a 32-bit build
- #capable of accessing, sending, receiving, and managing long (> 2GB) files.
- #On 64-bit platforms, it does no harm.
- #
- linux gnu-linux:
- @echo "Making C-Kermit for Linux..."; \
- # Dummy comment \
- if test \
- `grep grantpt /usr/include/*.h /usr/include/*.h | wc -l` -gt 0; \
- then if test -c /dev/ptmx; \
- then HAVE_PTMX='-DHAVE_PTMX'; \
- else HAVE_PTMX=''; \
- fi; \
- fi ; \
- HAVE_OPENPTY=''; \
- if test `grep openpty /usr/include/*.h | wc -l` -gt 0; then \
- HAVE_OPENPTY='-DHAVE_OPENPTY'; \
- fi; \
- if test -n '$$HAVE_OPENPTY'; \
- then if ld -lutil > /dev/null 2> /dev/null; then \
- LIB_UTIL='-lutil'; \
- else \
- LIB_UTIL=''; \
- fi; \
- fi; \
- HAVE_LIBCURSES=''; \
- HAVE_CURSES=''; \
- if ld -lncurses > /dev/null 2> /dev/null; then \
- HAVE_LIBCURSES='-lncurses'; \
- if test -f /usr/include/ncurses.h; then \
- HAVE_CURSES='-DCK_NCURSES -I/usr/include/ncurses'; \
- else \
- HAVE_LIBCURSES=''; \
- fi; \
- fi; \
- if test -z '$$HAVE_LIBCURSES'; then \
- if ld -lcurses > /dev/null 2> /dev/null; then \
- HAVE_LIBCURSES='-lcurses'; \
- if test -f /usr/include/curses.h; then \
- HAVE_CURSES='-DCK_CURSES -I/usr/include/curses'; \
- else \
- HAVE_LIBCURSES=''; \
- fi; \
- fi; \
- fi; \
- HAVE_RESOLV=''; \
- if ld -lresolv > /dev/null 2> /dev/null; then \
- HAVE_RESOLV='-lresolv'; \
- fi; \
- HAVE_CRYPT=''; \
- HAVE_CRYPT_H=''; \
- if ld -lcrypt > /dev/null 2> /dev/null; then \
- if test -f /usr/include/crypt.h; then \
- HAVE_CRYPT_H='-DHAVE_CRYPT_H'; \
- HAVE_CRYPT='-lcrypt'; \
- fi; \
- fi; \
- if test -f /usr/include/baudboy.h ; \
- then HAVE_BAUDBOY='-DHAVE_BAUDBOY' ; \
- else HAVE_BAUDBOY=''; \
- fi; \
- if test -n '$$HAVE_BAUDBOY' || test -f /usr/include/ttylock.h; \
- then HAVE_LOCKDEV='-DHAVE_LOCKDEV' ; \
- else HAVE_LOCKDEV='' ; \
- fi ; \
- if test -n '$$HAVE_LOCKDEV'; then \
- if ld -llockdev > /dev/null 2> /dev/null; then \
- HAVE_LIBLOCKDEV='-llockdev'; \
- else \
- HAVE_LOCKDEV=''; \
- fi; \
- fi; \
- NEEDCURSESPROTOTYPES=''; \
- if test -f /etc/issue; then \
- if egrep "(Ubuntu|Debian)" /etc/issue > /dev/null; then \
- NEEDCURSESPROTOTYPES='-DNEEDCURSESPROTOTYPES'; \
- fi; \
- fi; \
- if grep __USE_LARGEFILE64 /usr/include/features.h > /dev/null; \
- then HAVE_LARGEFILES='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'; \
- else HAVE_LARGEFILES=''; \
- fi; \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$$HAVE_CURSES $$HAVE_PTMX $$HAVE_LOCKDEV $$HAVE_CRYPT_H \
- $$HAVE_BAUDBOY $$HAVE_OPENPTY $$HAVE_LARGEFILES $(KFLAGS) -D_IO_file_flags" \
- "LIBS=$(LIBS) $$LIB_UTIL \
- $$HAVE_LIBCURSES $$HAVE_RESOLV $$HAVE_CRYPT $$HAVE_LOCKDEV" \
- linuxa
- #PREVIOUS LINUX TARGET
- #Use this target if you have trouble with the one just above.
- #This is the previous target for Linux, retired at the end of 2015.
- #As you can see the tests for curses/ncurses and other libraries and
- #header files were getting ridiculous and were only going to get worse
- #as Linux versions proliferated.
- #
- #The HAVE_PTMX test was previously "if test -c /dev/ptmx" but this was
- #not sufficient for Debian 2.1, because although it had /dev/ptmx, it did not
- #have grantpt(), unlockpt(), or ptsname(), so has been changed to look for a
- #grantpt() prototype in the header files. Modified in 8.0.206 to allow for
- #libraries that contain .so's but no .a's, e.g. Mandrake 9.0.
- #HAVE_BAUDBOY added in 8.0.210 for Red Hat -- it's like AIX ttylock().
- #Modified 17 Aug 2005 to use openpty() if available because the other stuff
- #dumps core in 64-bit ia64 and x86_64 builds.
- #
- #Added HAVE_LOCKDEV on openSuSE >= 11.3, which uses ttylock directly instead
- #of baudboy 2010/08/23
- linux-2015:
- @if test \
- `grep grantpt /usr/include/*.h /usr/include/sys/*.h | wc -l` -gt 0; \
- then if test -c /dev/ptmx; then HAVE_PTMX='-DHAVE_PTMX'; \
- else HAVE_PTMX=''; fi; fi ; \
- if test `grep openpty /usr/include/pty.h | wc -l` -gt 0; \
- then HAVE_OPENPTY='-DHAVE_OPENPTY'; \
- else HAVE_OPENPTY=''; fi ; \
- HAVE_LIBCURSES=''; \
- if test -f /lib64/libncurses.so.5 || \
- test -f /lib64/libncurses.so || \
- test -f /lib64/libncurses.a; then \
- HAVE_LIBCURSES='-lncurses'; \
- else if test -f /usr/lib64/libncurses.so || \
- test -f /usr/lib/libncurses.a || \
- test -f /usr/lib64/libncurses.so.5 || \
- test -f /usr/lib/x86_64-linux-gnu/libncurses.so || \
- test -f /usr/lib/x86_64-linux-gnu/libncurses.a || \
- test -f /usr/lib/libncurses.so; then \
- HAVE_LIBCURSES='-lncurses'; \
- else if test -f /usr/lib/$(MULTIARCH)/libncurses.so || \
- test -f /usr/lib/$(MULTIARCH)/libncurses.a || \
- test -f /usr/lib/$(MULTIARCH)/libncurses.so; then \
- HAVE_LIBCURSES='-lncurses'; \
- else if test -f /usr/lib64/libcurses.so || \
- test -f /usr/lib/libcurses.a || \
- test -f /usr/lib/libcurses.so; then \
- HAVE_LIBCURSES='-lcurses'; fi; fi; fi; fi; \
- HAVE_CURSES=''; \
- if test -n '$$HAVE_LIBCURSES'; then \
- if test -f /usr/include/ncurses.h; then \
- HAVE_CURSES='-DCK_NCURSES -I/usr/include/ncurses'; \
- else if test -f /usr/include/curses.h; then \
- HAVE_CURSES='-DCK_CURSES'; \
- else HAVE_LIBCURSES=''; \
- fi; fi; fi; \
- if test -f /usr/include/baudboy.h || test -f /usr/include/ttylock.h; \
- then HAVE_LOCKDEV='-DHAVE_LOCKDEV' ; \
- else HAVE_LOCKDEV='' ; fi ; \
- if test -f /usr/include/baudboy.h ; \
- then HAVE_BAUDBOY='-DHAVE_BAUDBOY' ; \
- else HAVE_BAUDBOY='' ; fi ; \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$$HAVE_CURSES $$HAVE_PTMX $$HAVE_LOCKDEV \
- $$HAVE_BAUDBOY $$HAVE_OPENPTY \
- `grep __USE_LARGEFILE64 /usr/include/features.h > /dev/null && \
- echo '-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'` \
- `if test -f /usr/include/crypt.h; then echo -DHAVE_CRYPT_H; fi` \
- $(KFLAGS)" \
- "LIBS=$(LIBS) $$HAVE_LIBCURSES \
- `if test -n '$$HAVE_OPENPTY'; then echo -lutil; fi` \
- `if test -f /usr/lib64/libresolv.a || test -f /usr/lib64/libresolv.so \
- || test -f /usr/lib/libresolv.a || test -f /usr/lib/libresolv.so \
- || test -f /usr/lib/i386-linux-gnu/libresolv.a \
- || test -f /usr/lib/i386-linux-gnu/libresolv.so \
- || ls /lib/$(MULTIARCH)/libresolv.* > /dev/null 2> /dev/null \
- || ls /lib/x86_64-linux-gnu/libresolv.* > /dev/null 2> /dev/null; \
- then echo -lresolv; fi` \
- `if test -f /usr/lib64/libcrypt.a || test -f /usr/lib64/libcrypt.so \
- || test -f /usr/lib/libcrypt.a || test -f /usr/lib/libcrypt.so \
- || ls /lib/$(MULTIARCH)/libcrypt.* > /dev/null 2> /dev/null \
- || ls /lib/x86_64-linux-gnu/libcrypt.* > /dev/null 2> /dev/null; \
- then echo -lcrypt; fi` \
- `if test -f /usr/lib64/liblockdev.a \
- || test -f /usr/lib64/liblockdev.so \
- || test -f /usr/lib/liblockdev.a \
- || test -f /usr/lib/liblockdev.so \
- || ls /usr/lib/$(MULTIARCH)/liblockdev.* > /dev/null 2> /dev/null; \
- then echo -llockdev; fi`" \
- linuxa
- # Linux + Shadow passwords + PAM
- # OK 2011/06/18
- linux+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux+Shadow+PAM...'
- $(MAKE) linux KTARGET=$${KTARGET:-$(@)} \
- KFLAGS="-DCK_SHADOW -DCK_PAM $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = -lpam"
- # Linux systems that have no <sys/select.h>.
- # (not tested in recent years, perhaps no longer needed)
- linuxns:
- $(MAKE) linux KTARGET=$${KTARGET:-$(@)} KFLAGS=-DNO_SYS_SELECT_H
- # Linux-script-only:
- # A minimum-size version for Linux that does only scripting and
- # serial communication -- no networks, no file transfer, no security.
- # OK 2011/06/18
- linuxso:
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O0 -DLINUX -pipe -fcommon -funsigned-char \
- -DPOSIX -DCK_POSIX_SIG \
- -DLINUXFSSTND -DNOCOTFMC -DNOXFER -DNODEBUG -DNOCSETS -DNOHELP \
- -DNONET -DMINIDIAL -DNOSCRIPT -DNOIKSD -DNOPUSH $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" "LIBS = "
- # Secure targets for Linux. These work on RHAS4, RHEL4, and RHEL5,
- # unlike some of the older targets that follow. They hook into the main Linux
- # target so we pick up all the other new stuff - large files, baudboy.h, the
- # appropriate pty interface, etc.
- # Linux with Kerberos 5.
- # Use "make linux+krb5 KFLAGS=-DNO_KRB5_INIT_ETS" if necessary.
- #OK 2011/06/16 on Fedora 14 with:
- # make linux+krb5 "LIBS=$LIBS /lib/libk5crypto.so.3 /lib/libcom_err.so.2"
- # On RHEL5.x: make linux+krb5 -UCK_DES
- # On RHEL6.6: make linux+krb5 "K5LIB=-L /lib64"
- linux+krb5:
- @echo 'Making C-Kermit $(CKVER) for Linux with Kerberos 5...'
- @case `openssl version` in \
- *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
- *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \
- *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \
- *) OPENSSLOPTION="" ;; \
- esac; \
- HAVE_DES=''; \
- DES_LIB=''; \
- if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \
- ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \
- DES_LIB='-ldes425'; \
- HAVE_DES='-DCK_DES -DLIBDES'; \
- echo "HAVE DES"; \
- else echo "NO DES"; \
- fi; \
- K5CRYPTO=''; \
- if ls /lib/libk5crypto* > /dev/null 2> /dev/null; then \
- K5CRYPTO='-lk5crypto'; \
- else if ls /usr/lib/libk5crypto* > /dev/null 2> /dev/null; then \
- K5CRYPTO='-lk5crypto'; \
- else if ls /usr/lib64/libk5crypto* > /dev/null 2> /dev/null; then \
- K5CRYPTO='-lk5crypto'; \
- fi; fi; fi; \
- COM_ERR=''; \
- if ls /lib/libcom_err* > /dev/null 2> /dev/null; then \
- COM_ERR='-lcom_err'; \
- fi; \
- GSSAPILIB='-lgssapi'; \
- if ls /lib/libgssapi_krb5* > /dev/null 2> /dev/null; then \
- GSSAPILIB='-lgssapi_krb5'; \
- else if ls /usr/lib/libgssapi_krb5* > /dev/null 2> /dev/null; then \
- GSSAPILIB='-lgssapi_krb5'; \
- else K5DIR=`echo $(K5LIB) | sed 's|-L||'`; \
- if ls $$K5DIR/libgssapi_krb5* > /dev/null 2> /dev/null; then \
- GSSAPILIB='-lgssapi_krb5'; \
- fi; fi; fi; \
- $(MAKE) linux KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "KFLAGS= -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 $$OPENSSLOPTION \
- -DCK_ENCRYPTION $$HAVE_DES $(K5INC) $(K5INC)/krb5 \
- -I/usr/include/et $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $$DES_LIB -lcrypto $$GSSAPILIB -lkrb5 \
- $$K5CRYPTO $$COM_ERR $(LIBS)"
- # Linux with Kerberos 5 and Kerberos 4.
- # Use "make linux+krb5 KFLAGS=-DNO_KRB5_INIT_ETS" if necessary.
- # Add "KFLAGS=-UCK_DES" if failure messages look DES-related.
- # UNTESTED (because I can't find a box with Krb4 and Krb5 installed)
- linux+krb5+krb4:
- @echo 'Making C-Kermit for Linux with Kerberos 4 and Kerberos 5'
- $(MAKE) linux+krb5 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DKRB4 -DKRB524 $(KFLAGS)" "LIBS=$(LIBS) -lkrb4"
- # Linux with OpenSSL
- # In Linux, SSL libs are often in /lib or /usr/lib and so found by default.
- # This targets takes into account the DES library might or might not
- # exist. If it does exist, however, the target will require some editing
- # if its basename is not libdes425. - fdc Tue Sep 21 14:28:00 2010
- # IMPORTANT: Some Linux platforms have DES libraries but they are missing
- # functions used by Kermit. In that case you will get fatal errors at
- # link time involving routines such as des_ecb3_encrypt, des_random_seed,
- # and des_set_odd_parity. In that case, "make linux KFLAGS=-UCK_DES"
- # There's a new warning at the end that should come out if this happens,
- # and that should not come out if it didn't.
- #
- linux+ssl linux+openssl linux+openssl+zlib+shadow+pam linux+openssl+shadow:
- @echo 'Making C-Kermit $(CKVER) for Linux+OpenSSL SSLLIB=$(SSLLIB)'
- @case `openssl version` in \
- *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
- *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \
- *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \
- *) OPENSSLOPTION="" ;; \
- esac; \
- HAVE_DES=''; \
- DES_LIB=''; \
- if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \
- ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \
- DES_LIB='-ldes425'; \
- HAVE_DES='-DCK_DES -DLIBDES'; \
- echo "HAVE DES"; \
- else echo "NO DES"; \
- fi; \
- $(MAKE) linux KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "KFLAGS= -DCK_AUTHENTICATION -DCK_ENCRYPTION -DCK_CAST $$HAVE_DES \
- -DCK_SSL -DHAVE_LOCKDEV -DCK_PAM -DZLIB \
- -DCK_SHADOW $$OPENSSLOPTION $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SSLLIB) -llockdev -lssl $$DES_LIB -lcrypto -lpam -ldl -lz $(LIBS)"
- # Linux with Kerberos 5 and OpenSSL
- # OK 2011/05/16
- # Add -UCK_DES if functions like des_ecb3_encrypt, es_random_seed,
- # come up missing at link time.
- # NOTE: MULTIARCH is defined externally, e.g. in DEB_HOST_MULTIARCH
- # On RHEL6.6: make linux+krb5+ssl "K5LIB=-L /lib64"
- linux+krb5+ssl linux+krb5+openssl:
- @echo 'Making C-Kermit $(CKVER) for Linux with Krb5 and OpenSSL...'
- @case `openssl version` in \
- *0.9.7*) OPENSSLOPTION="-DOPENSSL_097" ;; \
- *0.9.8*) OPENSSLOPTION="-DOPENSSL_098" ;; \
- *1.[0-9].[0-9]*) OPENSSLOPTION="-DOPENSSL_100" ;; \
- *) OPENSSLOPTION="" ;; \
- esac; \
- HAVE_DES=''; \
- DES_LIB=''; \
- if ls /usr/lib/libdes* > /dev/null 2> /dev/null || \
- ls $(SSLLIB)/libdes* > /dev/null 2> /dev/null; then \
- DES_LIB='-ldes425'; \
- HAVE_DES='-DCK_DES -DLIBDES'; \
- echo "HAVE DES"; \
- else echo "NO DES"; \
- fi; \
- K5CRYPTO=''; \
- if ls /lib/libk5crypto* > /dev/null 2> /dev/null; then \
- K5CRYPTO='-lk5crypto'; \
- else if ls /usr/lib/libk5crypto* > /dev/null 2> /dev/null; then \
- K5CRYPTO='-lk5crypto'; \
- else if ls /usr/lib64/libk5crypto* > /dev/null 2> /dev/null; then \
- K5CRYPTO='-lk5crypto'; \
- else if ls /usr/lib/$(MULTIARCH)/libk5crypto* > /dev/null 2> /dev/null; then \
- K5CRYPTO='-lk5crypto'; \
- fi; fi; fi; fi; \
- COM_ERR=''; \
- if ls /lib/libcom_err* > /dev/null 2> /dev/null; then \
- COM_ERR='-lcom_err'; \
- else if ls /lib/$(MULTIARCH)/libcom_err* > /dev/null 2> /dev/null; then \
- COM_ERR='-lcom_err'; \
- fi; fi; \
- GSSAPILIB='-lgssapi'; \
- if ls /lib/libgssapi_krb5* > /dev/null 2> /dev/null; then \
- GSSAPILIB='-lgssapi_krb5'; \
- else if ls /usr/lib/$(MULTIARCH)/libgssapi_krb5* > /dev/null 2> /dev/null; then \
- GSSAPILIB='-lgssapi_krb5'; \
- else K5DIR=`echo $(K5LIB) | sed 's|-L||'`; \
- if ls $$K5DIR/libgssapi_krb5* > /dev/null 2> /dev/null; then \
- GSSAPILIB='-lgssapi_krb5'; \
- fi; fi; fi; \
- $(MAKE) linux KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "KFLAGS= -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 \
- -DCK_SSL -DCK_PAM -DZLIB -DCK_SHADOW $$OPENSSLOPTION $(SSLINC) \
- -DCK_ENCRYPTION $$HAVE_DES $(K5INC) $(K5INC)/krb5 \
- -I/usr/include/et $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) -lssl $$DES_LIB -lpam -lz \
- -lcrypto $$GSSAPILIB -lkrb5 $$K5CRYPTO $$COM_ERR $(LIBS)"
- # ::BEGIN_OLD_LINUX_TARGETS::
- # The remaining Linux entries are for special or customized builds. They have
- # not been generalized ("subroutinized") like the ones above. Ideally, we
- # should allow for every combination of libc vs glibc, gcc vs egcs, curses vs
- # ncurses, Kerberos IV vs Kerberos V vs SRP (in any combination), and so on.
- # The best way to do this is to set KFLAGS and LIBS values and then chain to
- # the main "linux" target, as in the examples just above. To skip past all of
- # these old targets (and there are many) search for ::END_OLD_LINUX_TARGETS::
- # (after this line).
- #Sharp Zaurus SL-5500 - Linux based
- zsl5500:
- @echo 'Making C-Kermit $(CKVER) for Sharp Zaurus SL-5500...'
- @touch ckcpro.c
- @touch wart
- $(MAKE) linuxnc KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DZSL5500" \
- "CC = gcc" "CC2 = gcc"
- #Mklinux DR3 has horrible bug in <utmpbits.h> - see ckufio.c.
- mklinux:
- $(MAKE) KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DUTMPBUG" \
- "LIBS=-lcrypt -lresolv" linuxa
- #LinuxPPC 1999
- linuxppc:
- @echo 'Making C-Kermit $(CKVER) for LinuxPPC 1999...'
- @if test -f /usr/lib/libcrypt.a; then \
- if test -f /usr/lib/libresolv.a; then \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(NCURSES_CPP) -DHAVE_CRYPT_H \
- -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
- "LIBS=-lncurses -lresolv -lcrypt" linuxa ; \
- else \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(NCURSES_CPP) -DHAVE_CRYPT_H \
- -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
- "LIBS=-lncurses -lcrypt" linuxa ; \
- fi \
- else \
- if test -f /usr/lib/libresolv.a; then \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(NCURSES_CPP) \
- -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
- "LIBS=-lncurses -lresolv" linuxa ; \
- else \
- $(MAKE) KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(NCURSES_CPP) \
- -DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
- "LIBS=-lncurses" linuxa ; \
- fi \
- fi
- # Like "make linux" but built with egcs rather than gcc.
- # If you get "Internal compiler error xxx, output pipe has been closed",
- # try removing -pipe.
- linuxegcs:
- @echo 'Making C-Kermit $(CKVER) for Linux 1.2 or later with egcs...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = egcs" "CC2 = egcs" \
- "CFLAGS = -O0 -DLINUX -pipe -funsigned-char \
- -DPOSIX -DCK_POSIX_SIG -DCK_NCURSES -DNOCOTFMC \
- -DTCPSOCKET -DLINUXFSSTND $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lncurses -lcrypt -lresolv"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.1 (no K4 compatibility).
- linux+krb5-old:
- @echo 'Making C-Kermit $(CKVER) for Linux on Intel with Kerberos...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O0 -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 \
- -DCK_ENCRYPTION -DCK_DES -DCK_CURSES -DCK_POSIX_SIG \
- -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H $(K5INC) $(K5INC)/krb5 \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) -lncurses -ltermcap -ldes425 -lkrb5 \
- -lcom_err -lk5crypto -lgssapi_krb5 -lcrypt -lresolv"
- # Linux on Intel PC with SRP 1.7.4 using GNU MP, Krypto, and Eric Young's
- # DES library. Remove the -DCK_DES, -DLIBDES and -ldes if you do not have
- # Eric Young's# libdes.a installed.
- #
- linux+srp+gmp:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) \
- -lncurses -ltermcap -lsrp -lgmp -ldes -lkrypto -lcrypt -lresolv"
- linux+srp+gmp+no-des:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP ...'
- $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) \
- -lncurses -ltermcap -lsrp -lgmp -lkrypto -lcrypt -lresolv"
- linux+srp+gmp-export:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) srpmit-export KTARGET=$${KTARGET:-$(@)} \
- "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DFNFLOAT \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) \
- -lncurses -ltermcap -lsrp -lgmp -lkrypto -lcrypt -lm -lresolv"
- linux+srp+gmp+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_PAM -DFNFLOAT $(SRPINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) -lncurses -ltermcap -lsrp -lgmp -ldes -lkrypto \
- -lcrypt -lpam -ldl -lm -lresolv"
- #Linux on Intel PC with SRP 1.7.4 built with OpenSSL for Big Number Math
- #and Cryptographic functionality.
- #
- linux+srp:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(SRPINC) $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(SSLLIB) \
- -lncurses -ltermcap -lsrp -lkrypto -lcrypto -lcrypt -lresolv"
- linux+srp+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_PAM -DFNFLOAT $(SRPINC) $(SSLINC) $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(SSLLIB) -lncurses -ltermcap -lsrp -lkrypto \
- -lcrypto -lcrypt -lpam -ldl -lm -lresolv"
- #Linux on Intel PC with SRP and SSL/TLS.
- #
- # libsrp.a should be build with OpenSSL
- # Requires the Kerberos 1.2.2 or higher to be compiled with KRB4 compatibility.
- #Remove -ltermcap if it causes trouble e.g. in Debian 2.2.
- #If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
- linux+srp+openssl:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(SRPINC) $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(SSLLIB) \
- -lncurses -ltermcap -lsrp -lssl -lkrypto -lcrypto \
- -lcrypt -lresolv"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2 and SRP.
- #
- # libsrp.a should be build with GNU MP (libgmp.a)
- # instead of AT&T CryptoLib (libcrypt.a) due to naming conflicts with
- # standard distribution Linux libraries.
- # Requires the Kerberos 1.2.2 or higher to be compiled with KRB4 compatibility.
- linux+krb5+krb4+srp:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB54+SRP...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SRPINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SRPLIB) \
- -lncurses -ltermcap -lsrp -lgmp -lgssapi_krb5 -lkrypto \
- -ldes -lkrb4 -ldes425 -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP and SSL/TLS.
- #
- # libsrp.a should be build with OpenSSL
- # Requires the Kerberos 1.2.2 or higher to be compiled with KRB4 compatibility.
- # Requires OpenSSL 0.9.6a or higher
- #If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
- linux+krb5+krb4+srp+openssl:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SRPLIB) $(SSLLIB) \
- -lncurses -ltermcap -lsrp \
- -lkrb4 -lssl -lkrypto -lcrypto \
- -lkrb5 -lcom_err -lk5crypto -lgssapi_krb5 -lcrypt -lresolv"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SSL/TLS.
- #
- # libsrp.a should be build with OpenSSL
- # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
- #If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
- linux+krb5+krb4+openssl:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lncurses -ltermcap \
- -lkrb4 -lssl -lcrypto -lkrb5 -lcom_err \
- -lk5crypto -lgssapi_krb5 -lcrypt -lresolv"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.1, SSL/TLS.
- #
- # libsrp.a should be build with OpenSSL
- # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
- # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
- linux+krb5+krb4+openssl+shadow:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_SHADOW \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lncurses -ltermcap \
- -lkrb4 -lssl -lcrypto -lkrb5 -lcom_err \
- -lk5crypto -lgssapi_krb5 -lcrypt -lresolv"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2, SSL/TLS.
- #
- # libsrp.a should be build with OpenSSL
- # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
- # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
- linux+krb5+krb4+openssl+zlib+shadow:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 -DZLIB \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_SHADOW \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lncurses -ltermcap \
- -lkrb4 -lssl -lcrypto -lkrb5 -lcom_err \
- -lk5crypto -lgssapi_krb5 -lcrypt -lresolv -lz"
- linux+krb5+krb4+srp-export:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) xermit-export KTARGET=$${KTARGET:-$(@)} \
- "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SRPINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) \
- -lncurses -ltermcap -lsrp -lgmp -lkrb4 -ldes425 -lkrb5 -lgssapi_krb5 \
- -lcom_err -lk5crypto -lkrypto -lcrypt -lresolv"
- linux+krb5+krb4+srp+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_PAM $(K5INC) $(K5INC)/krb5 $(SRPINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) \
- -lncurses -ltermcap -lsrp -lgmp -ldes -lkrb4 -ldes425 -lkrb5 \
- -lcom_err -lk5crypto -lgssapi_krb5 -lkrypto -lcrypt -lpam -ldl \
- -lresolv"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP and SSL/TLS.
- # and PAM.
- #
- # libsrp.a should be build with OpenSSL
- # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
- # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
- linux+krb5+krb4+srp+openssl+pam-debug:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit-debug KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -w -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG $(K5INC) $(K5INC)/krb5 \
- $(SRPINC) $(SSLINC) $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \
- -lncurses -ltermcap -lsrp -lkrb4 -lssl -lkrypto -lcrypto \
- -lkrb5 -lcom_err -lk5crypto -lgssapi_krb5 -lcrypt -lresolv -lpam -ldl"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.1, SRP and SSL/TLS.
- # and PAM.
- #
- # libsrp.a should be build with OpenSSL
- # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
- # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
- linux+krb5+krb4+srp+openssl+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap -lsrp \
- -lkrb4 -lssl -lkrypto -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP, OpenSSL
- # with ZLIB and PAM
- #
- # libsrp.a should be build with OpenSSL
- # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
- # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
- linux+krb5+krb4+srp+openssl+zlib+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap -lsrp \
- -lkrb4 -lssl -lkrypto -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, SRP, OpenSSL
- # with ZLIB, Shadow Passwords, and PAM
- #
- # libsrp.a should be build with OpenSSL
- # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
- # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
- linux+krb5+krb4+srp+openssl+zlib+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_SHADOW $(K5INC) $(K5INC)/krb5 $(SRPINC) $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(SRPLIB) $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap -lsrp -lkrypto \
- -lkrb4 -lssl -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, OpenSSL
- # with Shadow Passwords, PAM
- #
- # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
- linux+krb5+krb4+openssl+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL,...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_SHADOW $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap \
- -lkrb4 -lssl -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, OpenSSL
- # with ZLIB, Shadow Passwords, PAM
- #
- # libsrp.a should be build with OpenSSL
- # Requires the Kerberos 1.2.2 be compiled with KRB4 compatibility.
- # If you have OpenSSL 0.9.7 or later, add -DOPENSSL_097 to KFLAGS.
- linux+krb5+krb4+openssl+zlib+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- -DCK_SHADOW $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap \
- -lkrb4 -lssl -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz"
- #Red Hat 9 - full install includes Kerberos 5 (4 compat), PAM, SSL.
- #Also works around bug in curses in which terminal goes dead after
- #returning from file-transfer display. Assumes OpenSSL 0.9.7 or later.
- redhat9:
- @echo "Building SECURE Kermit for Red Hat 9.0..."
- $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH90 -DOPENSSL_097 $(KFLAGS)"
- #Ditto plus SRP (which is not normally included with RH Linux).
- redhat9+srp:
- @echo "Building SECURE Kermit for Red Hat 9.0..."
- $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH90 -DOPENSSL_097 $(KFLAGS)"
- #For Red Hat AS 2.1 with OpenSSL
- redhat21+ssl:
- @echo "Building SECURE Kermit for Red Hat 2.1..."
- $(MAKE) linux+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = $(KFLAGS)"
- #Red Hat Linux 8.0 - full install includes Kerberos 5 (4 compat), PAM, SSL.
- #Also works around bug in curses in which terminal goes dead after
- #returning from file-transfer display.
- redhat80:
- @echo "Building SECURE Kermit for Red Hat 8.0..."
- $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH80 $(KFLAGS)"
- redhat80+srp:
- @echo "Building SECURE Kermit for Red Hat 8.0..."
- $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH80 $(KFLAGS)"
- #Red Hat Linux 7.3 - full install includes Kerberos 5 (4 compat), PAM, SSL.
- #Also works around bug in curses in which terminal goes dead after
- #returning from file-transfer display.
- redhat73:
- @echo "Building SECURE Kermit for Red Hat 7.3..."
- $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH73 $(KFLAGS)"
- redhat73+srp:
- @echo "Building SECURE Kermit for Red Hat 7.3..."
- $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH73 $(KFLAGS)"
- #Red Hat Linux 7.2 - full install includes Kerberos 5 (4 compat), PAM, SSL.
- #Also works around bug in curses in which terminal goes dead after
- #returning from file-transfer display.
- redhat72:
- @echo "Building SECURE Kermit for Red Hat 7.2..."
- $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH72 $(KFLAGS)"
- redhat72+srp:
- @echo "Building SECURE Kermit for Red Hat 7.2..."
- $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH72 $(KFLAGS)"
- #Red Hat Linux 7.1 - full install includes Kerberos 5 (4 compat), PAM, SSL.
- #Also works around bug in curses in which terminal goes dead after
- #returning from file-transfer display.
- redhat71:
- @echo "Building SECURE Kermit for Red Hat 7.1..."
- $(MAKE) linux+krb5+krb4+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH71 $(KFLAGS)"
- redhat71+srp:
- @echo "Building SECURE Kermit for Red Hat 7.1..."
- $(MAKE) linux+krb5+krb4+srp+openssl+zlib+shadow+pam \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DRH71 $(KFLAGS)"
- #Linux on Intel PC with Cygnus or MIT Kerberos 5 1.2.2, OpenSSL
- # with ZLIB and PAM and Shadow passwords
- linux+krb5+openssl+zlib+shadow+pam:
- @echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB5,SSL...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -g -O0 -funsigned-char -fcommon -pipe \
- -DPOSIX -DLINUX -DNOCOTFMC \
- -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DCK_SHADOW -DHAVE_PTMX \
- -DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM -DZLIB \
- -DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
- $(K5INC) $(K5INC)/krb5 $(SSLINC) \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
- "LIBS = $(K5LIB) $(SSLLIB) \
- -lm -lncurses -ltermcap -lssl -lcrypto -lgssapi_krb5 \
- -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl -lz"
- linuxnotcp:
- $(MAKE) linux KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DNONET $(KFLAGS)"
- # "make linuxnotcp" with lcc (see http://www.cs.princeton.edu/software/lcc)
- # lcc does not understand various gcc extensions:
- # "__inline__" -- can be eliminated by adding "-D__inline__="
- # "__asm__ and "long long" -- in header files, should be surrounded by
- # "#ifndef(__STRICT_ANSI__)"/"#endif"
- # however, TCP requires some __asm__ functions, so cannot be compiled
- linuxnotcp-lcc:
- @echo 'Making C-Kermit $(CKVER) for Linux with lcc ...'
- @echo 'Read comments in makefile for additional information.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = lcc" "CC2 = lcc" \
- "CFLAGS = -DLINUX -DPOSIX -DCK_CURSES -DCK_POSIX_SIG \
- -UTCPSOCKET -DLINUXFSSTND -DNOLEARN $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap"
- # Linux 0.99.14 thru 1.0 with gcc, dynamic libraries, curses, TCP/IP.
- # For Linux 1.2 or later, use "make linux" (above).
- #
- # -DLINUXFSSTND (Linux File System Standard) gives UUCP lockfile /var/lock with
- # string pid. Remove this and get /usr/spool/uucp with int pid, which was used
- # in early Linux versions.
- #
- # If you get compiler errors regarding <linux/serial.h>, add -DNOHISPEED.
- #
- # -DCK_POSIX_SIG (POSIX signal handling) is good for Linux releases back to at
- # least 0.99.14; if it causes trouble for you, just remove it.
- #
- # -DCK_CURSES: Here we link with the regular curses library. But you should
- # be using ncurses. Internally, the ckuusx.c module includes <curses.h>, but
- # this really should be <ncurses.h>. Thus if you have the new curses
- # material, you should either install it with the standard names, or else
- # create symbolic links from the standard names to the new ones. If you get
- # compile-time errors complaining about data definitions in termcap.h, it
- # means you have new kernel material mixed with older libc header files. To
- # fix, add "#include <termios.h>" to the <termcap.h> file. Or if all this is
- # too confusing, create a new makefile entry based on this one, but with
- # -DCK_CURSES removed from CFLAGS and the entire LIBS= clause removed.
- #
- # But wait, there's more. On most Linux systems, -ltermcap must be included
- # in LIBS. But on others, the linker complains that libtermcap can't be
- # found. In that case, try removing -ltermcap from LIBS=.
- #
- # But wait, there's more. The format of the PID string in the UUCP lockfile
- # changed between Linux FSSTND 1.0 and 1.2. In the earlier standard, it had
- # leading zeros; in the second, it has leading spaces. By default this entry
- # uses the newer standard. To force the older one, add -DFSSTND10.
- #
- # "The nice thing about the Linux standard is there are so many to choose from"
- #
- # NOTE: Remove -DBIGBUFOK for small-memory or limited-resource systems.
- linux10:
- @echo 'Making C-Kermit $(CKVER) for Linux 1.0 or earlier...'
- @echo 'IMPORTANT: Read the comments in the linux section of the'
- @echo 'makefile if you get compilation or link errors.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O0 -DPOSIX -DCK_CURSES -DCK_POSIX_SIG -DLINUX \
- -DTCPSOCKET -DLINUXFSSTND -DOLINUXHISPEED -DNOLEARN $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap"
- #This version was used for Linux prior to C-Kermit 6.0.192.
- #Now the "Linux File System Standard" is considered standard, ditto TCP/IP.
- linuxold:
- @echo 'Making C-Kermit $(CKVER) for Linux...'
- @echo 'For FSSTND-recommended UUCP lockfiles, use:'
- @echo ' make linux "KFLAGS=-DLINUXFSSTND".'
- @echo 'Read comments in makefile for additional options.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS = -O -DLINUX -DPOSIX -DCK_CURSES -DCK_POSIX_SIG -DNOLEARN \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap"
- # ::END_OLD_LINUX_TARGETS::
- # LynxOS 2.2 with GCC compiler, TCP/IP and fullscreen display.
- # Probably also works with Lynx 2.1, and maybe even Lynx 2.0.
- # -X means use termios serial drivers rather than BSD4.3-style sgtty drivers.
- # If you have trouble with this, try "make bsd KFLAGS=-DNOFDZERO".
- lynx:
- @echo 'Making C-Kermit $(CKVER) for LynxOS 2.2 with TCP/IP'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -O -DPOSIX -DDIRENT -DSETREUID -DCK_CURSES -DTCPSOCKET \
- -DCK_ANSIC -DLYNXOS -DNOLEARN" "LNKFLAGS = -X" "LIBS = -lcurses -lbsd"
- lynx22:
- $(MAKE) lynx KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
- # LynxOS 2.1 with GCC compiler 1.40 and TCP/IP.
- lynx21:
- @echo 'Making C-Kermit $(CKVER) for LynxOS 2.1 with TCP/IP'
- $(MAKE) kermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -O -DSETREUID -DTCPSOCKET -DCK_ANSIC -DBSD4 -DLYNXOS" \
- "LIBS = -lbsd"
- #SCO Xenix 2.2.1 for IBM PC, XT, PS2/30, or other 8088 or 8086 machine
- #Should this not work, try some of the tricks from sco286.
- #NOTE: -DRENAME is omitted for early SCO Xenix releases because it didn't
- #exist, or its semantics were different from the later POSIX-compliant
- #version of rename().
- sco86:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/86...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DNOFILEH -DNOIKSD -DNOUNICODE -DNOLEARN \
- $(KFLAGS) -Dunix -F 3000 -i -M0me" \
- "LNKFLAGS = -F 3000 -i -s -M0me" "LIBS = -lx"
- #SCO Xenix/286 2.2.1, e.g. for IBM PC/AT, PS/2 Model 50, etc.
- #Reportedly, this "make" can fail simply because of the size of this
- #makefile. If that happens, use "makeL", or edit out some of the
- #other entries. No debugging or character-set translation.
- sco286:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/286...'
- @echo 'If make fails, try using makeL.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -xenix -s -O -LARGE -DXENIX -DNOFILEH -Dunix -DRDCHK -DNAP \
- -DNOIKSD -DNODEBUG -DNOTLOG -DNOCSETS -DNOLEARN \
- $(KFLAGS) -F 3000 -i -M2let16" \
- "LIBS = -lx" "LNKFLAGS = -xenix -s -O -LARGE -F 3000 -i -M2let16"
- #SCO Xenix/286 2.2.1, e.g. for IBM PC/AT, PS/2 Model 50, etc.
- #As above, but with HDBUUCP (This one might need fixing -- see sco286).
- sco286hdb:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/286 with HDB UUCP...'
- @echo 'If make fails, try using makeL.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -s -O -LARGE -DXENIX -DNOFILEH -Dunix -DRDCHK -DNAP \
- -DHDBUUCP -DNOIKSD -DNOUNICODE -DNOLEARN \
- $(KFLAGS) -F 3000 -i -M2let32" \
- "LIBS = -lx" "LNKFLAGS = -s -O -LARGE -F 3000 -i -M2let32"
- #SCO Xenix/386 2.2.2 and 2.2.3
- sco386:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.2.2...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DNOFILEH -DNOIKSD -DNOREDIRECT -DNOLEARN \
- -Dunix -DRDCHK -DNAP -DNOUNICODE $(KFLAGS) -Otcl -M3e" \
- "LNKFLAGS = -s" "LIBS = -lx"
- #SCO XENIX/386 2.2.3 with Excelan TCP/IP + curses.
- # NOTE: This one might need some work in C-Kermit 6.0.
- # You might need to include /usr/include/sys/types.h
- # containing "typedef char *caddr_t;". Then at least it compiles.
- sco386netc:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.2.3 + Excelan TCP'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -I/usr/include/exos -DXENIX -DCK_CURSES -DNOUNICODE \
- -Dunix -DRDCHK -DNAP -DTCPSOCKET -DEXCELAN -DNOJC -DNOMKDIR -DNOFILEH \
- -DNOLEARN -DNOREDIRECT -DNOIKSD -DNO_DNS_SRV $(KFLAGS) -Otcl -M3e" \
- "LNKFLAGS = -s" "LIBS = -lc -lx -lsocket -lcurses -ltermcap"
- #SCO XENIX/386 2.3.3 with gcc 1.37 or later...
- sco386gcc:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.3.3, gcc...'
- @echo 'Add -D_NO_PROTOTYPE if you have trouble with Xenix header files'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -O -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \
- -DNOJC -DNODEBUG -DNOUNICODE -DNOLEARN $(KFLAGS) \
- -traditional -fpcc-struct-return -fstrength-reduce \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
- -DM_SYSIII -DM_SYSV -DM_WORDSWAP -DM_XENIX -DNOIKSD -DNOREDIRECT \
- -DPWID_T=int " "LNKFLAGS = -s" "LIBS = -lx"
- #As above, but with curses...
- sco386gccc:
- @echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.3.3, gcc...'
- @echo 'Add -D_NO_PROTOTYPE if you have trouble with Xenix header files'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
- "CFLAGS= -O -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \
- -DNOJC -DNODEBUG -DCK_CURSES -DNOUNICODE -DNOLEARN $(KFLAGS) \
- -traditional -fpcc-struct-return -fstrength-reduce \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DNOREDIRECT \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
- -DM_SYSIII -DM_SYSV -DM_WORDSWAP -DM_XENIX -DNOIKSD \
- -DPWID_T=int " "LNKFLAGS = -s" "LIBS = -lx -lcurses -ltermlib"
- #SCO UNIX (and ODT) entries...
- #
- #NOTE: All SCO UNIX entry LIBS should have "-lc_s -lc -lx" IN THAT ORDER (if
- #shared C library is desired), or else "-lc -lx" IN THAT ORDER. Use shared C
- #libraries to save memory, but then don't expect to run the resulting binary
- #on a different machine. When using -lc_s, you must also use -lc, because the
- #shared C library does not contain all of libc.a. And in all cases, -lc must
- #ALWAYS precede -lx.
- #
- #ANOTHER NOTE: -DRENAME is included in all SCO UNIX entries. Remove it if it
- #causes trouble. No harm is done by removing it (see ckuins.txt).
- #
- #AND ANOTHER: In theory, it should be possible to run SCO UNIX binaries on
- #SCO Xenix 2.3 and later. In practice, this might not work because of the
- #libraries, etc. Also, don't add the -link -z switch (which is supposed to
- #root out references to null pointers) because it makes UNIX binaries core
- #dump when they are run under Xenix.
- #NOTE: -Otcl removed and replaced by -O, since -Otcl produced incorrect code.
- #SCO UNIX/386 3.2.0, 3.2.1, and SCO Xenix 2.3.x
- sco3r2:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2.0 or 3.2.1 ...'
- @echo 'Warning: If make blows up, edit the makefile to join'
- @echo 'the following three continued lines into one line.'
- @echo 'Also, remove -DRENAME if _rename unresolved at link time.'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DNOLEARN \
- -DRENAME -DNOIKSD -DNOJC $(KFLAGS) -O" \
- "LNKFLAGS = -s" "LIBS = -lc -lx"
- #SCO UNIX/386 3.2.0 and SCO Xenix 2.3.x with Excelan TCP/IP support.
- #In case of compilation or runtime problems, try adding
- #"-DUID_T=int -DGID_T=int" to the CFLAGS. If that doesn't work, try
- #"-DUID_T=uid_t -DGID_T=gid_t".
- sco3r2net:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Excelan...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -I/usr/include/exos -DXENIX -DSVR3 -DNOFILEH -DNOLEARN \
- -DHDBUUCP -DRDCHK -DNAP -DRENAME -DTCPSOCKET -DEXCELAN -DNOJC \
- -DNOIKSD -DNOREDIRECT $(KFLAGS) -O" \
- "LNKFLAGS = -s" "LIBS = -lc -lx -lsocket"
- #SCO UNIX/386 3.2.0 and SCO Xenix 2.3.x with Excelan TCP/IP support.
- #As above, with curses added.
- sco3r2netc:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Excelan / curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -I/usr/include/exos -DXENIX -DSVR3 -DNOFILEH -DNOLEARN \
- -DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET -DEXCELAN -DNOJC $(KFLAGS) \
- -DRENAME -DCK_CURSES -DNOREDIRECT -DNOIKSD -O" "LNKFLAGS = -s" \
- "LIBS = -lc -lx -lsocket -lcurses -ltermcap"
- #SCO UNIX 3.2.x or SCO Xenix 2.3.x with Racal InterLan TCP/IP support
- # Extra compile flags for other version of Racal InterLan TCP/IP:
- # Xenix286/NP621-286, use -Ml -DPARAMH -DINTERLAN -Di286 -DSYSV
- # Xenix386/NP621-386, use -DPARAMH -DINTERLAN -Di386 -DSYSV
- # ISC386ix/NP622I, use -DSYSV -Di386
- # SCO Unix3.2/NP622S, use -DSYSV -Di386 -DSCO_UNIX
- # AT&T SVR3.2/NP622A, use -DSYSV -Di386 -DATT
- sco3r2netri:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Racal InterLan...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -I/usr/include/interlan -DXENIX -DNOFILEH -DHDBUUCP \
- -DSVR3 -DRDCHK -DNAP -DTCPSOCKET -DPARAMH -DINTERLAN -Di386 -DSYSV \
- -DRENAME -DNOREDIRECT -DNOIKSD -DNOJC -DNOLEARN $(KFLAGS) -Otcl -M3e" \
- "LNKFLAGS = -s" "LIBS = -lc -lx -ltcp"
- # SCO XENIX/386 2.3.3 SysV with SCO TCP/IP
- # System V STREAMS TCP developed by Lachman Associates Inc and
- # Convergent Technologies.
- # -DRENAME removed since some reports indicate it is not supported
- # (whereas others say it is.)
- sco3r2lai:
- @echo 'Making C-Kermit $(CKVER) for SCO XENIX/386 2.3.3 + TCP/IP...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DLAI_TCP -Di386 -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK \
- -DNAP -DTCPSOCKET -DPWID_T=int -DNOREDIRECT -DNOIKSD -DNOLEARN \
- $(KFLAGS) -Otcl -i -M3e" \
- "LNKFLAGS = -i -s" "LIBS = -lc -lx -lsocket"
- sco3r2laic:
- @echo 'Making C-Kermit $(CKVER) for SCO XENIX/386 2.3.3 + TCP/IP...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DLAI_TCP -Di386 -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK \
- -DNAP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES -DM_TERMINFO -DNOLEARN \
- -DPWID_T=int -DNOREDIRECT -DNOIKSD $(KFLAGS) -Otcl -i -M3e" \
- "LNKFLAGS = -i -s" "LIBS = -ltinfo -lc -lx -lsocket"
- #SCO UNIX/386 3.2v2 (POSIX job control), shared libraries.
- sco3r22:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 ...'
- make wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \
- -DNAP -DRENAME -DPID_T=pid_t -DPWID_T=int -DDIRENT -DNOIKSD \
- -DNOREDIRECT $(KFLAGS) -O" \
- "LNKFLAGS = -s" "LIBS = -lc_s -lc -lx"
- #SCO UNIX/386 3.2v2, POSIX job control, fullscreen file transfer display,
- #dynamic memory allocation, shared C library
- sco3r22c:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 ...'
- @echo 'Warning: If make blows up, edit the makefile to join'
- @echo 'the following four continued lines into one line.'
- make wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DNOLEARN \
- -DCK_CURSES -DDIRENT -DRENAME -DNOREDIRECT -DNOIKSD \
- -DPID_T=pid_t -DPWID_T=int $(KFLAGS) -O" \
- "LNKFLAGS = -s" "LIBS = -lcurses -lc_s -lc -lx"
- #SCO UNIX/386 3.2v2 with gcc 1.40 or later (POSIX job control)
- sco3r22gcc:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2, gcc'
- @echo 'Warning: If make blows up, edit the makefile to join'
- @echo 'the following seven continued lines into one line.'
- make wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" \
- "CFLAGS= -O -DPOSIX -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \
- -DNOLEARN -DRENAME -traditional -fpcc-struct-return -fstrength-reduce \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
- -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
- -DPID_T=pid_t -DPWID_T=int -DNOREDIRECT -DNOIKSD $(KFLAGS) " \
- "LNKFLAGS = -s" "LIBS = -lc_s -lc -lx"
- #SCO UNIX/386 3.2v2 (ODT 1.1) (POSIX job control) with SCO TCP/IP, shared libs
- #Requires SCO TCP/IP or ODT development system for telnet.h, etc.
- sco3r22net:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2.2 + TCP/IP...'
- @echo 'Warning: If make blows up, edit the makefile to join'
- @echo 'the following three continued lines into one line.'
- make xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET \
- -DRENAME -DPID_T=pid_t -DPWID_T=int -DDIRENT -DNOREDIRECT -DNOIKSD \
- $(KFLAGS) -O" "LNKFLAGS = -s" "LIBS = -lsocket -lc_s -lc -lx"
- #As above, but with curses for fullscreen file transfer display.
- #Requires SCO TCP/IP or ODT development system for telnet.h, etc.
- sco3r22netc:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 + TCP/IP...'
- @echo 'Warning: If make blows up, edit the makefile to join'
- @echo 'the following three continued lines into one line.'
- make xermit KTARGET=$${KTARGET:-$(@)} "CFLAGS= \
- -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET -DRENAME \
- -DCK_CURSES -DDIRENT -DNOIKSD -DNOREDIRECT \
- -DPID_T=pid_t -DPWID_T=int -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx"
- #SCO XENIX 2.3.4, no curses, no TCP/IP, no IKSD.
- #This one built and tested in C-Kermit 7.0.
- #lcfp is C library floating-point support.
- #Use -M3 to generate 32-bit i386 code instead of 16-bit segmented i286 code.
- #Use -Me to enable MS nonstandard keywords in system headers.
- #Use -W2 or W3 to increase the warning level.
- #OK: 2011/06/15
- sco234:
- @echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \
- -DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \
- -DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DSCO234 -DDCLGETCWD $(KFLAGS) \
- -Otcl" "LNKFLAGS = -s" "LIBS = -lcfp -lc -lx"
- #SCO XENIX 2.3.4, no TCP/IP, no IKSD, but with curses.
- # Built and tested in C-Kermit 7.0.
- # Note: XENIX 2.3.4 does not have newterm() so no point in adding -DCK_NEWTERM.
- sco234c:
- @echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4 + curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \
- -DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \
- -DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DCK_CURSES -DSCO234 \
- -DDCLGETCWD $(KFLAGS) -Otcl" \
- "LNKFLAGS = -s" "LIBS = -lcfp -lc -ltinfo -lx"
- #SCO XENIX 2.3.4 with SCO TCP/IP and curses, no IKSD.
- # Built and tested in C-Kermit 7.0. TCP/IP works and curses works.
- # Previous versions of this target included -lmalloc, but this caused "error:
- # " _calloc : symbol defined more than once" at link time so I removed it.
- # Results are likely to vary depending on exactly which version of the SDK
- # and TCP/IP SDK you have.
- sco234netc:
- @echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4 + TCP + curses...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK -DNOLEARN \
- -DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \
- -DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DCK_CURSES -DSCO234 \
- -DDCLGETCWD -DTCPSOCKET -DNO_DNS_SRV $(KFLAGS) -Otcl" \
- "LNKFLAGS = -s" "LIBS = -ltinfo -lsocket -lcfp -lc -lx"
- # SCO 3.2v4.x targets...
- # NOTE: Add -DDCLPOPEN and/or -DDCLFDOPEN to anySCO 3.2v4.x non-gcc entries
- # that complain about fdopen() or popen() at compile time. They compile OK
- # without these flags as of July 1999. However, the gcc entries seem to
- # need them, at least for gcc 2.7.2.2.
- # NOTE 2: To enable IKSD support, add:
- # -DCK_LOGIN -DNOGETUSERSHELL -DNOINITGROUPS
- # to CFLAGS (not tested).
- #SCO UNIX/386 3.2v4 (POSIX job control), curses, ANSI C compilation,
- #<dirent.h> (EAFS) file system. Remove -lmalloc if it causes trouble. It was
- #put there to avoid core dumps caused by regular libc.a malloc. Add -J to make
- #all chars unsigned. This version uses select() for CONNECT and also has
- #high-precision timers and so might not work on non-TCP systems, in which case
- #sco32v4ns should be used instead.
- # If you get _ftime redefinition_ complaint, try adding -DODT30 to CFLAGS.
- sco32v4:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
- make xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DCK_SCO32V4 -DNOFILEH -DHDBUUCP -DCK_CURSES -DM_TERMINFO \
- -DNOANSI -DSELECT -DNOIKSD -DDCLGETCWD -NOLSTAT \
- -DNOLINKBITS -DDCLGETCWD $(KFLAGS) -O" \
- "LNKFLAGS = -s" "LIBS = -lcurses -lmalloc -lsocket -lc_s -lc -lx"
- # As above, but with no dependence on sockets library or select().
- sco32v4ns:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
- @echo 'No select() and no sockets library.'
- make wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DCK_SCO32V4 -DNOFILEH -DHDBUUCP -DCK_CURSES -DM_TERMINFO \
- -DNOANSI -DNOIKSD -DNOGFTIMER -DCK_POLL -DNAP -DDCLGETCWD -DNOLSTAT \
- -DNOLINKBITS -DDCLGETCWD -DNOLEARN -O $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lcurses -lmalloc -lc_s -lc -lx"
- #SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation,
- #<dirent.h> (EAFS) file system. With DIRENT, -lc must come before -lx.
- #Reportedly it's OK to add -DCK_REDIR and -DCK_WREFRESH, and to remove -lc_s.
- #Requires SCO TCP/IP development system or ODT for telnet.h, etc.
- #See sco32v4 above for additional comments.
- #NOTE: No more room for -Dxxx -- 25 seems to be the limit. Move some to
- #ckcdeb.h or somewhere...
- sco32v4net:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
- @echo 'If you get _ftime redefinition_ complaint,'
- @echo 'use make sco-odt30.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNOFILEH -DHDBUUCP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES \
- -DNAP -DCK_WREFRESH -DNOLINKBITS -D_IBCS2 -DSELECT -DNOLSTAT \
- -DDCLGETCWD -DCK_SCO32V4 -DNOIKSD -O \
- $(KFLAGS)" "LNKFLAGS = $(LNKFLAGS) -s" \
- "LIBS = $(LIBS) -lcurses -lsocket -lmalloc -lsocket -lc_s -lc -lx"
- #SCO UNIX/386 3.2v4 with gcc 1.40 or later, POSIX job control.
- #Also see comments in sco32r4 entry.
- sco32v4gcc:
- make xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" \
- "CFLAGS= -O -DNOFILEH -DHDBUUCP -DNOANSI -DCK_CURSES -DM_TERMINFO \
- -traditional -fpcc-struct-return -fstrength-reduce -funsigned-char \
- -D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLINKBITS \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DSELECT -DNOLSTAT \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 -DDCLGETCWD \
- -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
- -DDCLPOPEN -DDCLFDOPEN $(KFLAGS) " \
- "LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx"
- #SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation,
- #Requires SCO TCP/IP or ODT development system for telnet.h, etc.
- #<dirent.h> (EAFS) file system. With DIRENT, -lc must come before -lx.
- #gcc 1.40 or later. Also see comments in sco32r4 entry.
- sco32v4netgcc:
- make xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2=gcc" \
- "CFLAGS= -O2 -DNOFILEH -DHDBUUCP -DSELECT -DNOLSTAT \
- -DNOANSI -DTCPSOCKET -DCK_CURSES -DM_TERMINFO \
- -D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLINKBITS \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DDCLGETCWD \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
- -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
- -DDCLPOPEN -DDCLFDOPEN $(KFLAGS)" \
- "LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx"
- #As above but with bgcc BOUNDS CHECKING (for developers only). -lcheck has
- #bounds-checking replacements for malloc, memcpy, bcopy, etc, so must come
- #before -lsocket and -lc.
- sco32v4netbgcc:
- make xermit KTARGET=$${KTARGET:-$(@)} \
- "CC = bgcc -pipe -m386" "CC2=bgcc -pipe -m386" \
- "CFLAGS= -O1 -g -DNOFILEH -DHDBUUCP -DSELECT \
- -DNOANSI -DTCPSOCKET -DCK_CURSES -DM_TERMINFO \
- -D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLSTAT \
- -DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DNOLINKBITS \
- -DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 -DDCLGETCWD \
- -DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
- -DDCLPOPEN -DDCLFDOPEN $(KFLAGS) " \
- "LNKFLAGS = -g" "LIBS = -lcurses -lcheck -lsocket -lx"
- sco32v4netnd:
- @echo sco32v4net with no debug
- $(MAKE) "MAKE=$(MAKE)" sco32v4net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DNODEBUG -DNOTLOG" "LIBS=$(LIBS)"
- sco3r2netnd:
- @echo sco32v4netnd built for SCO XENIX 2.3 under SCO UNIX...
- @echo requires copying /lib/386/Slibc.a to /lib/386/Slibc_s.a and
- @echo getting /lib/386/Slibsocket.a from a XENIX devkit.
- @echo WARNING: poll/CK_POLL supported only on XENIX 2.3.4
- echo For earlier XENIX systems, replace CK_POLL with RDCHK.
- $(MAKE) "MAKE=$(MAKE)" sco32v4netnd KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -x2.3 -DNORENAME -DNOSYMLINK" \
- "LNKFLAGS = $(LNKFLAGS) -x2.3" \
- "LIBS=-ldir -lcfp $(LIBS)"
- #SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation,
- #<dirent.h> (EAFS) file system. With DIRENT, -lc must come before -lx.
- #Reportedly it's OK to add -DCK_REDIR and -DCK_WREFRESH, and to remove -lc_s.
- #Requires SCO TCP/IP development system or ODT for telnet.h, etc.
- #See sco32v4 above for additional comments.
- # Note: "xermit" means use the select() version of the CONNECT module.
- sco32v4netx:
- @echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
- @echo 'If you get _ftime redefinition_ complaint,'
- @echo 'use make sco-odt30.'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DNOFILEH -DHDBUUCP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES -DNAP \
- -DCK_WREFRESH -DNOLINKBITS -D_IBCS2 -DSELECT -DDCLGETCWD \
- -DCK_SCO32V4 -DNOIKSD -DNOLSTAT -O $(KFLAGS)" \
- "LNKFLAGS = $(LNKFLAGS) -s" \
- "LIBS = $(LIBS) -lcurses -lsocket -lmalloc -lsocket -lc_s -lc -lx"
- sco32v4netndx:
- @echo sco32v4netx with no debug
- $(MAKE) "MAKE=$(MAKE)" sco32v4netx KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DNODEBUG -DNOTLOG" "LIBS=$(LIBS)"
- sco3r2netndx:
- @echo sco32v4netndx built for SCO XENIX 2.3 under SCO UNIX...
- @echo requires copying /lib/386/Slibc.a to /lib/386/Slibc_s.a and
- @echo getting /lib/386/Slibsocket.a from a XENIX devkit.
- @echo WARNING: poll/CK_POLL supported only on XENIX 2.3.4
- echo For earlier XENIX systems, replace CK_POLL with RDCHK.
- $(MAKE) "MAKE=$(MAKE)" sco32v4netndx KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -x2.3 -DNORENAME -DNOSYMLINK" \
- "LNKFLAGS = $(LNKFLAGS) -x2.3" \
- "LIBS=-ldir -lcfp $(LIBS)"
- sco-odt30:
- @echo SCO ODT 3.0
- $(MAKE) "MAKE=$(MAKE)" sco32v4net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=$(KFLAGS) -DODT30"
- #SCO OpenServer 5.0 (SCO UNIX 3.2v5.0) with SCO development tools, no TCP/IP.
- #SCO OSR5 is much more like standard System V than previous SCO releases.
- #The SCO development tools include TCP/IP, so this target is only for creating
- #artificially limited versions of kermit required by site policy rather than
- #the operating system. NOSYSLOG is included because syslog() requires the
- #sockets library.
- sco32v500:
- @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DNOSYSLOG \
- $(KFLAGS)" \
- "LIBS=-lcurses $(LIBS)" "LNKFLAGS=$(LNKFLAGS)"
- sco32v5:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v500
- #SCO OpenServer 5.0 with networking, SCO development tools.
- #Networking libraries are now provided with the OS.
- sco32v500net:
- @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET \
- -DNO_DNS_SRV $(KFLAGS)" \
- "LIBS=-lcurses -lsocket $(LIBS)" "LNKFLAGS=$(LNKFLAGS)"
- sco32v5net:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v500net
- #SCO OpenServer 5.0 with networking and OpenSSL, SCO development tools.
- #Networking libraries are now provided with the OS.
- sco32v500net+ssl:
- @echo Making C-Kermit $(CKVER) for SCO OSR5 with OpenSSL...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET \
- -DNO_DNS_SRV -DCK_AUTHENTICATION -DCK_SSL -DCK_TRIGGER \
- $(SSLINC) $(SSLLIB) $(KFLAGS)" \
- "LIBS=$(SSLLIB) -lcurses -lsocket -lssl -lcrypto $(LIBS)" \
- "LNKFLAGS=$(LNKFLAGS)"
- #SCO OpenServer 5.0 with gcc, no networking.
- #Note: NOSYSLOG required for non-net entries because it requires <socket.h>
- sco32v500gcc:
- @echo Using gcc...
- $(MAKE) "MAKE=$(MAKE)" sco32v500CC=gcc CC2=gcc \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS= $(KFLAGS)"
- #SCO OpenServer 5.0 with networking, gcc.
- sco32v500netgcc:
- @echo TCP/IP networking added - using gcc...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net CC=gcc CC2=gcc \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
- #SCO OpenServer 5.0 with networking, gcc, elf.
- sco32v500netgccelf:
- @echo TCP/IP networking added - using gcc, dynamic elf library
- $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=-O3 -belf" "LNKFLAGS=-belf"
- sco32v502:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR502 $(KFLAGS)"
- #SCO OpenServer 5.0.2 with networking, SCO development tools.
- sco32v502net:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-b elf -DSCO_OSR502 $(KFLAGS)"
- #SCO OpenServer 5.0.4 (SCO UNIX 3.2v5.0.4) with SCO development tools.
- #Like 5.0, but adds high serial speeds. First POSIX-based SCO version.
- #Note: the -O flag is deliberately omitted for /bin/cc (= /usr/ccs/bin/cc).
- sco32v504:
- @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5.0.4...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
- -DSCO_OSR504 -b elf -DPOSIX \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DNOSYSLOG $(KFLAGS)" \
- "LIBS=-lcurses $(LIBS)" "LNKFLAGS=$(LNKFLAGS)"
- #SCO OpenServer 5.0.4 with gcc, no networking.
- sco32v504gcc:
- @echo Using gcc...
- $(MAKE) "MAKE=$(MAKE)" sco32v504 "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS= $(KFLAGS)"
- #SCO OpenServer 5.0.4 with networking.
- #SCO development tools (/bin/cc = /usr/ccs/bin/cc).
- #Optimization deliberately suppressed.
- sco32v504net:
- @echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5.0.4...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET \
- -b elf -DSCO_OSR504 -DPOSIX -DNO_DNS_SRV $(KFLAGS)" \
- "LIBS=-lcurses -lsocket $(LIBS)" "LNKFLAGS=$(LNKFLAGS)"
- #SCO OpenServer 5.0.4 with networking, gcc.
- sco32v504netgcc:
- @echo TCP/IP networking added - using gcc...
- @echo If gcc crashes on ckwart.c then build it by hand:
- @echo " gcc -o wart -DCK_SCOV5 ckwart.c"
- $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DSCO_OSR504 -DPOSIX $(KFLAGS)"
- #SCO OpenServer 5.0.4 with networking, gcc, elf.
- sco32v504netgccelf:
- @echo TCP/IP networking added - using gcc, dynamic elf library
- $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc"
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR504 -DPOSIX -O3 -belf $(KFLAGS)" \
- LNKFLAGS="-belf"
- #SCO OpenServer 5.0.5 (SCO UNIX 3.2v5.0.5) with SCO /bin/cc.
- #Like 5.0, but adds high serial speeds. First POSIX-based SCO version.
- #You might have to add "LIBS=-ltinfo" (some do, some don't).
- sco32v505:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DNOSHADOW -b elf -DPOSIX $(KFLAGS)"
- #SCO OpenServer 5.0.5 (SCO UNIX 3.2v5.0.5) with SCO UDK.
- #This one can't see the high serial speeds and anything to do with modem
- #signals doesn't work because UKD cc has its own alternative universe of
- #header files.
- sco32v505udk:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DDCLTIMEVAL -DNOSHADOW -b elf -DPOSIX $(KFLAGS)"
- #SCO OpenServer 5.0.5 with networking, SCO /bin/cc.
- #See comments with sco32v505 targets.
- sco32v505net:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DNOSHADOW -b elf -DPOSIX $(KFLAGS)"
- #SCO OpenServer 5.0.5 with networking and OpenSSL, SCO /bin/cc.
- #See comments with sco32v505 targets.
- sco32v505net+ssl:
- @echo TCP/IP networking and OpenSSL added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net+ssl KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DNOSHADOW -b elf -DPOSIX $(KFLAGS) " \
- "LIBS=$(SSLLIB) -lcurses -lsocket -lssl -lcrypto $(LIBS)" \
- "LNKFLAGS=$(LNKFLAGS)"
- #SCO OpenServer 5.0.5 with networking, SCO UDK.
- #See comments with above sco32v505 targets.
- sco32v505udknet:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DDCLTIMEVAL -DNOSHADOW -b elf -DPOSIX $(KFLAGS)"
- #SCO OpenServer 5.0.5 with gcc, no networking.
- sco32v505gcc:
- @echo Using gcc...
- $(MAKE) "MAKE=$(MAKE)" sco32v500 "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DPOSIX -funsigned-char $(KFLAGS)"
- #SCO OpenServer 5.0.5 with gcc, no networking, no shadow passwords.
- sco32v505xgcc:
- @echo Using gcc...
- $(MAKE) "MAKE=$(MAKE)" sco32v500 "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DNOSHADOW -DPOSIX -funsigned-char $(KFLAGS)"
- #SCO OpenServer 5.0.5 with networking, gcc.
- sco32v505netgcc:
- @echo TCP/IP networking added - using gcc...
- @echo If gcc crashes on ckwart.c then build it by hand:
- @echo " gcc -o wart -DCK_SCOV5 ckwart.c"
- $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \
- KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DNOSHADOW -DPOSIX -funsigned-char $(KFLAGS)"
- #egcs is just like gcc but generates ELF by default.
- #Or you can include -melf (not -belf) to force it.
- sco32v505netegcs:
- $(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v505netgcc \
- KTARGET=$${KTARGET:-$(@)}
- #SCO OpenServer 5.0.5 with networking, gcc, elf.
- sco32v505netgccelf:
- @echo TCP/IP networking added - using gcc, dynamic elf library
- $(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \
- "KFLAGS=-DSCO_OSR505 -DPOSIX -funsigned-char -O3 -belf $(KFLAGS)" \
- KTARGET=$${KTARGET:-$(@)} LNKFLAGS="-belf"
- #SCO OpenServer 5.0.6 with SCO /bin/cc.
- # Add -DDCLTIMEVAL when building with UDK.
- #Like 5.0.5. IMPORTANT: Use sco32v506a target for 5.0.6a.
- sco32v506:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -b elf -DPOSIX $(KFLAGS)"
- #SCO OpenServer 5.0.6 with networking, SCO /bin/cc.
- # Add -DDCLTIMEVAL when building with UDK.
- # IMPORTANT: Use sco32v506a target for 5.0.6a.
- sco32v506net:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -b elf -DPOSIX $(KFLAGS)"
- #SCO OpenServer 5.0.6a, no networking, SCO development tools.
- #This one has patched sio drivers that, for the first time,
- #actually handle modem signals correctly.
- # Add -DDCLTIMEVAL when building with UDK.
- sco32v506a:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR506A -DNEEDMDMDEFS \
- -b elf -DPOSIX $(KFLAGS)"
- #SCO OpenServer 5.0.6a with networking, SCO development tools.
- # Add -DDCLTIMEVAL when building with UDK.
- sco32v506anet:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR506A -DNEEDMDMDEFS \
- -b elf -DPOSIX $(KFLAGS)"
- #SCO OpenServer 5.0.7, no networking, SCO development tools.
- #Adds flags to make PTY and SSH commands work. These have been tested
- #only in 5.0.7 but probably they can also be added to earlier OSR5 targets.
- sco32v507:
- $(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR507 -DNEEDMDMDEFS \
- -DHAVE_PTSNAME -DHAVE_PTMX -DHAVE_GRANTPT \
- -b elf -DPOSIX $(KFLAGS)"
- #SCO OpenServer 5.0.7 as above but with networking.
- sco32v507net:
- @echo TCP/IP networking added...
- $(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
- "KFLAGS=-DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR507 -DNEEDMDMDEFS \
- -DHAVE_PTSNAME -DHAVE_PTMX -DHAVE_GRANTPT \
- -b elf -DPOSIX $(KFLAGS)"
- #SCO OpenServer 6 (new target 30 Jan 2006)
- sco_osr600 sco600:
- @echo Making C-Kermit $(CKVER) for SCO OpenServer 6.0.0...
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
- -DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET \
- -DNO_DNS_SRV -DSCO_OSR505 -DSCO_OSR506 -DSCO_OSR507 -DNEEDMDMDEFS \
- -DHAVE_PTSNAME -DHAVE_PTMX -DHAVE_GRANTPT -DDCLTIMEVAL \
- -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 \
- -DSOCKOPT_T=socklen_t -DGSOCKNAME_T=size_t -DGPEERNAME_T=size_t \
- -DHERALD=\"\\\" SCO OpenServer `uname -v`\\\"\" \
- -b elf -DPOSIX $(KFLAGS)" \
- "LIBS=-lcurses -lsocket $(LIBS)" "LNKFLAGS=$(LNKFLAGS)"
- #Tandy 16/6000 with Xenix 3.0 (16 bits)
- #C-Kermit 7.0 (and later) do not build here; "too many defines".
- #Add more -DNOxxx options to remove features if program won't load.
- #Successful operation is a function of program size, physical memory,
- #available swap space, etc. The following stripped-down configuration
- #seems to work on most Tandy 6000s. NOTE: "-+" means allow long variable
- #names, needed for C-Kermit 6.0 because some identifiers are not unique
- #within the first six characters.
- trs16:
- @echo 'Making C-Kermit $(CKVER) for Tandy 16/6000, Xenix 3.0...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -+ -DATTSV -DTRS16 -DNOMKDIR -DDCLPOPEN -DCK_CURSES \
- -DNODEBUG -DNOTLOG -DNOHELP -DNOSCRIPT -DNOCSETS -DNOIKSD \
- -DNOREDIRECT -DNOSYSLOG -DNOPUTENV -DNOREALPATH -DNOLEARN \
- $(KFLAGS) -O" "LIBS= -lcurses -ltermcap" "LNKFLAGS = -+ -n -s"
- # QNX 4.21 and above, 32-bit version, Watcom C32 10.6, fully configured,
- # except no job control because QNX 4.x does not support it. New NCURSES
- # library used instead of CURSES.
- #
- # -Oatx optimizes to favor speed over size: loop optimization, inline fn's.
- # -Os favors size over speed. Saves 30-40K out of about 1.75M.
- # -3r = generate 386 code with register-based arg passing.
- # -3s = generate 386 code with stack-based arg passing.
- # -ms = separate code & data 4GB segments (32-bit builds only).
- # -mf = flat memory model code+data in one 4GB segment (ditto).
- # -zc = place literal strings in code segment.
- # -N4M = Big stack (increase the digit upon SIGSEGVs at runtime).
- # chars are unsigned by default (-j makes them signed by default).
- # -NOUUCP is included because QNX doesn't use it.
- # Add these to the end if you like but they dump core on my QNX 4.25 system:
- #
- # @wermit -h >use.qnx
- # @usemsg wermit use.qnx
- # @rm use.qnx
- #
- # If you get warnings about HEADER or C_IN add -DNO_DNS_SRV.
- # OK 2011/06/14
- qnx32:
- @echo 'Making C-Kermit $(CKVER) for QNX 4.2x, 32-bit...'
- $(MAKE) xermit \
- "LNKFLAGS = -N4M -3r" \
- "CFLAGS = -ms -3r -DQNX -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL \
- -DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS -DNOJC \
- -DNOINITGROUPS -DNOUUCP -DCK_ANSIC -DPID_T=pid_t -Oatx -zc $(KFLAGS)" \
- "LIBS= -lsocket -lncurses -ltermcap"
- # As above but no networking since some QNX systems do not have TCP/IP
- # installed, or the TCP/IP developers kit, which includes all the needed
- # header files. This entry has not been tested on a QNX system that, in
- # fact, does not have TCP/IP installed; some adjustments might be necessary,
- # in particular regarding the use of select(): is -lsocket needed, can we
- # get the needed definitions from non-TCP/IP header files (FD_SET, etc)?
- qnx32nonet:
- @echo 'Making C-Kermit $(CKVER) for QNX 4.2x, 32-bit, no net...'
- $(MAKE) xermit \
- "LNKFLAGS = -N4M -3r" \
- "CFLAGS = -3r -ms -DQNX -DNONET -DNOIKSD -DCK_CURSES \
- -DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS -DNOJC \
- -DNOUUCP -DCK_ANSIC -DPID_T=pid_t -Oatx -zc $(KFLAGS)" \
- "LIBS= -lsocket -lncurses -ltermcap"
- @wermit -h >use.qnx
- @usemsg wermit use.qnx
- @rm use.qnx
- # Synonym for qnx32.
- qnx:
- $(MAKE) qnx32 "KFLAGS=$(KFLAGS)"
- # QNX 4.21 and above, 16-bit version, Watcom C 8.5 - and higher on i286 PCs
- # and above.
- #
- # IMPORTANT: Do not use Watcom C 10.6!!!
- # If you have it installed, add "-v9.52 to CFLAGS"
- #
- # NOTE: QNX 4.23 onward does not work on 286's anyway.
- # Stacksize 26000, objects larger than 100 bytes in their own segments,
- # string constants to the codesegment, etc. Fully configured except job ctrl.
- # This entry works for building a 16-bit executable on a 32-bit system, but
- # has not been tested on a 16-bit system. Uses large memory model, links
- # explicitly with large-model sockets library. Correct-model curses library
- # is chosen automatically. See comment in qnx32 entry about -DNOUUCP.
- #
- # WARNING:
- #
- # Watcom C prior to 10.6 never had released curses library. To link against it,
- # you must obtain ported free curses source from ftp://ftp.qnx.com/usr/free,
- # then compile and build library (cursesl.lib) and place it in /usr/lib. You
- # must also copy curses.h to /usr/include. Be aware that if you have Watcom
- # 10.6 installed, you should already have curses.h, which is the new ncurses
- # library. You must back it up and use free curses.h instead, since ncurses is
- # only for 32-bit applications and some definitions in these files are
- # different (e.g., clearok()). For safety, curses is not defined in build.
- #
- # In 7.0 -DNOHELP added to keep ckuus2.c from blowing up; NOCSETS and NOSPL
- # added because ckuus4 was blowing up, and NOFLOAT just because it seemed
- # dangerous (remove -DNOFLOAT if you want to try it), The result works OK
- # except for some mysterious beeps upon termination of the top-level keyword.
- #
- # Things to try next time we get in trouble:
- # . Change -zt100 to something smaller like -zt25
- # . Change -Oatx to -Omilerat (enable stack checking)
- # . Maybe get rid of -v9.52 -- it's only there because we were warned.
- #
- qnx16:
- @echo 'Making C-Kermit $(CKVER) for QNX 4.21, 16-bit...'
- $(MAKE) xermit \
- "LNKFLAGS = -2 -ml -N 26000" \
- "CFLAGS = -2 -Oatx -zc -zt100 -ml -DQNX -DQNX16 -DNOUUCP -DNOHELP \
- -DCK_REDIR -DSELECT -DSELECT_H -DNOJC -DNOGETUSERSHELL -DNOCSETS \
- -v9.52 -DTCPSOCKET -DCK_RTSCTS -DCK_ANSIC -DNOINITGROUPS -DNOKVERBS \
- -DNORANDOM -DNOCSETS -DNOSPL -DNOFLOAT -DPID_T=pid_t $(KFLAGS)"
- # QNX 4.1, 16-bit version, with Watcom C 8.5 on i286 PCs and above.
- # stacksize 26000, objects larger than 100 bytes in their own segments,
- # string constants to the codesegment, etc. Add -DNOUUCP if desired.
- qnx16_41:
- @echo 'Making C-Kermit $(CKVER) for QNX 4.1, 16-bit...'
- $(MAKE) xermit \
- "LNKFLAGS = -mh -N 26000" "CFLAGS = -Wc,-fpc -Wc,-j -DNOGETUSERSHELL \
- -Wc,-Ols -Wc,-zdf -Wc,-zc -Wc,-zt100 -mh -DPOSIX -DQNX -DDIRENT \
- -DNOCYRIL -DNODEBUG -DNOMSEND -DMINIDIAL -DNOXMIT -DNOSCRIPT -DNOSPL \
- -DNOSETKEY -DNOINITGROUPS -DQNX16 -DPID_T=pid_t $(KFLAGS)"
- # QNX Neutrino 2 (pwaechtler@qnx.de) crosscompiled on QNX 4.25.
- # Gets lots of compiler warnings.
- qnx_nto2+:
- @echo 'Making C-Kermit $(CKVER) for QNX Neutrino 2+ '
- cc -o wart ckwart.c
- $(MAKE) xermit \
- "CC = qcc -Vgcc_ntox86" \
- "CC2 = qcc -Vgcc_ntox86" \
- "LNKFLAGS = " \
- "CFLAGS = -DNEUTRINO -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL \
- -DNOUUCP -DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS \
- -DNOJC -DNOINITGROUPS -DCK_ANSIC -DPID_T=pid_t -DUNIX -DDIRENT \
- -DMYREAD -DBSD44ORPOSIX -DSVORPOSIX -DNDGPWNAM $(KFLAGS)" \
- "LIBS= -lsocket -lncurses "
- # QNX 6 (= Neutrino 2.xx) native build (kirussel@cisco.com).
- qnx6:
- @echo 'Making C-Kermit $(CKVER) for QNX6'
- $(MAKE) xermit KTARGET=QNX6 \
- "CFLAGS = -DPOSIX -DCK_POSIX_SIG -DNETPTY -DNOARROWKEYS \
- -DUSE_TIOCSDTR -DBIGBUFOK -DCKMAXOPEN=100 -DRLOGCODE -DNOREALPATH \
- -DMAXNAMLEN=48 -DQNX6 -DUSE_TERMIO -DINIT_SPTY \
- -DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DDYNAMIC \
- -DTCPSOCKET -DNOGETUSERSHELL -DCK_REDIR -DSELECT -DSELECT_H \
- -DCK_RTSCTS -DNOJC -DSVORPOSIX -DBSD44ORPOSIX -DNOUUCP -DCK_ANSIC \
- $(KFLAGS) -O" \
- "LIBS= -lsocket -lncurses"
- #MINIX/2.0 32 Bit version for intel 386+ running the POSIX-compliant MINIX
- # version 2.0 (The definition of fatal avoids a conflict with a symbol by
- # the same name in the curses library.) It is impossible to compile with
- # network support since Minix does not support Berkeley sockets.
- # Note: use chmem liberally on the compiler passes, make, and the final
- # kermit executable. (3 megabytes of memory for each is sufficient.)
- # From Terry McConnell, Syracuse U, and Will Rose. Will says:
- # The stacks for make and some compiler passes needed to be increased
- # with chmem as follows:
- # make 1MB
- # /usr/lib/em_cemcom.ansi 3MB
- # /usr/lib/em_opt 1MB
- # /usr/lib/i386/cg 1MB
- # /usr/lib/i386/as 1MB
- # The compiler temporary directory was set to /usr/tmp via the TMPDIR
- # environment variable; more than 1MB of temporary space was needed.
- # Kermit itself needs at least 1MB of stack.
- minix20:
- @echo 'Making C-Kermit $(CKVER) for MINIX 2.0/386...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} EXT=o \
- "CFLAGS= -wo -DV7 -DMINIX2 -DMINIX -DSIG_V -D_POSIX_SOURCE \
- -DCKCPU=\\\"i-386\\\" -DNOIKSD -Dfatal=myfatal -DCK_CURSES -DNOLEARN \
- -DNOSYSLOG -DUSE_MEMCPY -DNOREALPATH $(KFLAGS)" "LIBS= -lcurses"
- #MINIX/386 (PC Minix modified by Bruce Evans in Australia for 386 addressing)
- # For MINIX 1.5+ (but < 2.0)
- minix386:
- @echo 'Making C-Kermit $(CKVER) for MINIX/386...'
- @echo 'TOTALLY UNTESTED!'
- $(MAKE) wermit EXT=s KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DV7 -DMINIX -D_POSIX_SOURCE -DNOLEARN $(KFLAGS)"
- #MINIX/386 Minix modified by Bruce Evans in Australia to use 386 addressing
- minix386gcc:
- @echo 'Making C-Kermit $(CKVER) for MINIX/386 with gcc...'
- @echo 'TOTALLY UNTESTED!'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC=gcc -g -O" "CC2=gcc -g" \
- "CFLAGS= -DV7 -DMINIX -D_POSIX_SOURCE -DNOLEARN $(KFLAGS)"
- #MINIX - 68k version with ACK compiler.
- # If you have trouble compiling or running wart, "touch wart".
- # If it still doesn't work, "touch ckcpro.c".
- # The version configured below has many features removed, including
- # the TRANSMIT, MSEND, HELP, and SCRIPT commands, international
- # character set support, and the entire script programming language.
- # But it does have an interactive command parser.
- # Make sure make(1) has (at least) 100000 chmemory!
- # If you are using the Amsterdam C compiler, you might have to add "-D__ACK__".
- minix68k:
- @echo 'Making C-Kermit $(CKVER) for MINIX 68k with ACK...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE -DNOLEARN \
- -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
- -DNOSCRIPT -DNOCSETS -DNOSPL $(KFLAGS) \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V"
- #MINIX - 68k version with c68 compiler.
- # If you have trouble compiling or running wart, "touch wart" or
- # "touch ckcpro.c". Compiling ckudia.c (no -DNODIAL!) might fail. :-(
- # Give c68 250000 bytes of stack+heap; make sure make(1) has at least
- # 100000 chmemory. On a 1MB Atari ST this means that the recursive
- # call of make fails due to memory shortage. Try "make -n minixc68 >makeit",
- # followed by ". makeit". Otherwise, as above.
- minixc68:
- @echo 'Making C-Kermit $(CKVER) for MINIX 68k with c68...'
- $(MAKE) wermit "CC= cc -c68" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE -DNOLEARN \
- -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
- -DNOSCRIPT -DNOCSETS -DNOSPL $(KFLAGS) \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V"
- #MINIX - 68k version with c68 compiler.
- #A variation on the above that was recently (Sep 95) reported to work.
- minixc68a:
- @echo 'Making C-Kermit $(CKVER) for MINIX 68k with c68...'
- $(MAKE) wermit "CC= cc -c68" KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE \
- -DCK_ANSIC -DNODEBUG -DNOTLOG -DMINIDIAL -DEXTEN -DMYCURSES \
- -DNOSCRIPT -DNOCSETS -DNOSPL -DNOJC -DDIRENT -DNOLEARN \
- -DNOSETKEY -DNOESCSEQ $(KFLAGS) \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V"
- #MIPS Computer Systems with UMIPS RISC/OS 4.52 = AT&T UNIX System V R3.0.
- #Remove -DNOJC if job control can be safely used.
- mips:
- @echo 'Making C-Kermit $(CKVER) for MIPS RISC/OS...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DMIPS -DDIRENT -DCK_POLL -DNOJC -DNOLEARN -DPID_T=int \
- -DGID_T=gid_t -DUID_T=uid_t -i -O1500 $(KFLAGS)"
- #As above, but with TCP/IP and fullscreen support.
- mipstcpc:
- @echo 'Making C-Kermit $(CKVER) for MIPS RISC/OS...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DMIPS -DDIRENT -DCK_POLL -DNOJC \
- -DTCPSOCKET -DCK_CURSES -I/usr/include/bsd \
- -DPID_T=int -DGID_T=gid_t -DUID_T=uid_t -i -O1500 $(KFLAGS)" \
- "LIBS = -lcurses -lbsd"
- #Motorola Delta System V/68 R3, signal() is void rather than int.
- #Uses dirent.h and Honey DanBer uucp. Supports TCP/IP.
- #After building, use "mcs -d" to reduce size of the executable program.
- sv68r3:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DSV68 -DDIRENT -DHDBUUCP -DNO_DNS_SRV -DTCPSOCKET \
- -DNOUNICODE -DNOLEARN -DUSE_MEMCPY $(KFLAGS) -O" "LNKFLAGS ="
- #Motorola Delta System V/68 R3V5, signal() is void rather than int.
- #Uses dirent.h and Honey DanBer UUCP. Supports TCP/IP.
- #After building, use "mcs -d" to reduce size of the executable program.
- sv68r3v5:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V5'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DSV68 -DDIRENT -DHDBUUCP -DNO_DNS_SRV -DUSE_MEMCPY \
- -DTCPSOCKET -DINADDRX -DNOUNICODE -DFNFLOAT -DNOLEARN $(KFLAGS) -O" \
- "LNKFLAGS =" "LIBS = -linet -lm"
- #Motorola MVME147 System V/68 R3 V5.1. Requires gcc 2.1 to compile.
- #After building, use "mcs -d" to reduce size of the executable program.
- sv68r3v51:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V5.1'
- $(MAKE) wermit "CC=gcc-delta" "CC2=gcc-delta" \
- KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNODEBUG -DNO_DNS_SRV -DNOLEARN \
- -DNOUNICODE -DFNFLOAT -DSV68 -DUSE_MEMCPY $(KFLAGS) \
- -O2 -v -ftraditional" \
- "LNKFLAGS = -s -v" "LIBS = -lm881 -lm"
- #Motorola MVME147 System V/68 R3V6. derived from Motorola Delta System R3V5.
- #Checked on larger Motorola System V/68 R3V6 (with NSE Network Services Ext.)
- #After building, use "strip" to reduce size of the executable program.
- # "LIBS = -lnsl" removed in C-Kermit 6.1 - put back if needed.
- # "LIBS = lm" added in 7.1/8.0 for floating-point math.
- # ckuusr.c clobbers the optimizer.
- sv68r3v6:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V6'
- $(MAKE) ckuusr.$(EXT) KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSV68R3V6 -DDIRENT -DHDBUUCP -DNOLOGIN -DNOINITGROUPS \
- -DNOSYMLINK -DNOREDIRECT -DNOGFTIMER -DTCPSOCKET -DDCLGETCWD -DSV68 \
- -DNO_DNS_SRV -DNOUNICODE -DFNFLOAT -DSELECT -DUSE_MEMCPY $(KFLAGS)"
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSV68R3V6 -DDIRENT -DHDBUUCP -DNOLOGIN -DNOINITGROUPS \
- -DNOSYMLINK -DNOREDIRECT -DNOGFTIMER -DTCPSOCKET -DDCLGETCWD -DSV68 \
- -DNO_DNS_SRV -DNOUNICODE -DFNFLOAT -DSELECT -DUSE_MEMCPY $(KFLAGS)" \
- "LNKFLAGS =" "LIBS = -lm"
- #Motorola Delta System V/88 R32, signal() is void rather than int.
- #Uses dirent.h and Honey DanBer uucp. Needs <sys/utime.h> for setting
- #file dates. Supports TCP/IP.
- #After building, use "mcs -d" to reduce size of the executable program.
- sv88r32:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/88 R32...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -DSV88R32 -DDIRENT -DHDBUUCP -DTCPSOCKET \
- -DSYSUTIMEH -DCK_CURSES -DNOGETUSERSHELL -DGTODONEARG $(KFLAGS) -O" \
- "LIBS= -lcurses -lresolv" "LNKFLAGS = -s"
- #Motorola Delta System V/88 R40. Has <sys/termiox.h>, regular Berkeley
- #sockets library, i.e. in.h and inet.h are not misplaced in sys (rather than
- #netinet and arpa, respectively). Uses ANSI C constructs, advisory file
- #locking on devices, etc. curses support added. Reportedly, the
- #/usr/include/sys/vnode.h file has a bug which must be fixed before this
- #makefile entry can work correctly. The "if DEBUG" directive at about line
- #320 must be changed to "ifdef DEBUG" (Reportedly, this was fixed in
- #in System V/88 R4.3).
- #After building, use "mcs -d" to reduce size of the executable program.
- sv88r40:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/88 R40...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DMOTSV88R4 -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL -DGTODONEARG -DFNFLOAT \
- $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -lresolv -lm" "LNKFLAGS = -s"
- #As above but without the floating-point math library.
- sv88r40nm:
- @echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/88 R40...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS = -O -DSVR4 -DMOTSV88R4 -DDIRENT -DHDBUUCP -DSTERMIOX \
- -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL -DGTODONEARG $(KFLAGS)" \
- "LIBS= -lsocket -lnsl -lcurses -lresolv" "LNKFLAGS = -s"
- #As above but with floating-point math library support \ffp...() functions
- #and S-Expressions.
- #Olivetti X/OS R2.3, 3.x.
- #NOTES:
- # . If you build the executable on 2.x X/OS, it will also run on 3.x.
- # . If you build it on 3.x X/OS, it will NOT run on 2.x.
- # . Kermit can run with no privileges unless the uucp lines are protected,
- # in which case kermit must be owned by uucp with suid bit set:
- # chown uucp kermit ; chmod 4111 kermit.
- xos23:
- @echo 'Making C-Kermit $(CKVER) for Olivetti X/OS...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- 'CFLAGS=-OLM -DOXOS -DTCPSOCKET -DHDBUUCP $(KFLAGS)' \
- "LIBS=" "LNKFLAGS="
- #As above, but with curses.
- xos23c:
- @echo 'Making C-Kermit $(CKVER) for Olivetti X/OS with curses...'
- $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
- 'CFLAGS=-OLM -DOXOS -DTCPSOCKET -DHDBUUCP -DCK_CURSES $(KFLAGS)' \
- "LIBS=-lcurses" "LNKFLAGS="
- ckuuid:
- @echo 'building C-Kermit $(CKVER) set-UID/set-GID test programs'
- $(CC) -DANYBSD -DSAVEDUID -o ckuuid1 ckuuid.c
- $(CC) -DANYBSD -o ckuuid2 ckuuid.c
- $(CC) -DANYBSD -DNOSETREU -o ckuuid3 ckuuid.c
- $(CC) -DANYBSD -DSETEUID -DNOSETREU -o ckuuid4 ckuuid.c
- $(CC) -o ckuuid5 ckuuid.c
- @echo 'Read the top of ckuuid.c for directions...for testing'
- @echo 'you must make these programs setuid and setgid'
- ############################################################################
- # A N T I Q U I T I E S
- #
- # The following are antique targets from C-Kermit 5A or earlier. They have
- # not been updated or tested in years. Most of them will need recent features
- # disabled, usually with some combination of -DNOUNICODE, -DNOIKSD, -DNOANSI,
- # -DNOCKGHNLHOST, -DNO_DNS_SRV, -DNOREDIRECT, -DNOREALPATH, -DNOCURSES, etc.
- # They are also missing the KTARGET=$${KTARGET:-$(@)} business.
- # For details see ckuins.txt and ckccfg.txt.
- #
- ############################################################################
- #Berkeley Unix 2.8, 2.9 for PDP-11s with I&D space, maybe also Ultrix-11???
- #C-Kermit(5A) is simply too large (even turning off almost every feature
- #available) to run without both I&D space plus overlays. The old comment
- #suggested running 'pcc' but that won't help. Changing 'cc' to 'ckustr.sed'
- #will cause a string extraction to be done, saving D space by moving strings
- #to a file.
- bsd29:
- @echo Making C-Kermit $(CKVER) for 2.8 or 2.9BSD.
- @echo Read the makefile if you have trouble with this...
- $(MAKE) ovwermit \
- "CFLAGS= -DBSD29 -DNODEBUG -DNOTLOG -DNOCSETS -DNOHELP \
- -DNOSCRIPT -DNOSPL -DNOXMIT -DNODIAL $(KFLAGS)" \
- "LNKFLAGS= -i -lndir" "CC= cc " "CC2= cc"
- bsd210:
- @echo Please use ckubs2.mak to build C-Kermit $(CKVER) for 2.10BSD.
- bsd211:
- @echo Please use ckubs2.mak to build C-Kermit $(CKVER) for 2.11BSD.
- #Charles River Data Systems Universe with UNOS Version 9.2
- crds:
- @echo 'Making C-Kermit $(CKVER) for Charles River Data Systems...'
- make xermit \
- "CFLAGS = -DATTSV -DNOANSI -DDIRENT -DLONGFN -DTCPSOCKET \
- -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DNOSETREU \
- -Dsuspend=ksuspend $(KFLAGS) -O" "LNKFLAGS ="
- #Microport SV/AT for IBM PC/AT 286 and clones, System V R2.
- #The -O flag may fail on some modules (like ckuus2.c), in which case you
- #should compile them by hand, omitting the -O. If you get "hash table
- #overflow", try adding -DNODEBUG.
- #Also, reportedly this compiles better with gcc than with cc.
- mpsysv:
- @echo 'Making C-Kermit $(CKVER) for Microport SV/AT 286...'
- $(MAKE) wermit \
- "CFLAGS= -DATTSV -DNOLEARN $(KFLAGS) -O -Ml" "LNKFLAGS = -Ml"
- #Microsoft "Xenix/286" e.g. for IBM PC/AT
- xenix:
- @echo 'Making C-Kermit $(CKVER) for Xenix/286'
- $(MAKE) wermit \
- "CFLAGS= -DXENIX -DNOFILEH -DNOLEARN $(KFLAGS) -Dunix -F 3000 -i" \
- "LNKFLAGS = -F 3000 -i"
- #PC/IX, Interactive Corp System III for IBM PC/XT
- pcix:
- @echo 'Making C-Kermit $(CKVER) for PC/IX...'
- $(MAKE) wermit \
- "CFLAGS= -DPCIX -DISIII -DNOLEARN $(KFLAGS) \
- -Dsdata=sdatax -O -i" "LNKFLAGS = -i"
- #Integrated Solutions Inc V8S VME 68020
- isi:
- @echo Making C-Kermit $(CKVER) for 4.2BSD on ISI...
- $(MAKE) wermit "CC = cc" \
- "CFLAGS= -DBSD4 -DTCPSOCKET -DINADDRX -DDCLPOPEN -DDEBUG -DNOSETREU \
- -DCK_CURSES -DNOLEARN $(KFLAGS)" "LIBS = -lcurses -ltermcap"
- #Interactive Corp version of AT&T System III
- #is3: (very old, probably not sufficient for 5A or later)
- # @echo 'Making C-Kermit $(CKVER) for Interactive System III...'
- # make wermit "CFLAGS = -DISIII -Ddata=datax -O -i" "LNKFLAGS = -i"
- #The following should work, use it if you don't have gcc.
- #Use is3gcc if you have gcc.
- is3:
- @echo 'Making C-Kermit $(CKVER) for Interactive System III...'
- $(MAKE) wermit \
- "CFLAGS= -DISIII $(KFLAGS) -Ddata=datax -DNAP -DHDBUUCP
- -DLOCK_DIR=\"/usr/spool/uucp\" -DSIGTYP=void -O -i" "LNKFLAGS = -i"
- #Interactive UNIX System V R3, no network support. Uses <dirent.h> and Honey
- #DanBer UUCP. If this entry does not compile correctly, try any or all of the
- #following. These suggestions also apply more or less to the other is5r3xxx
- #entries that follow this one.
- # . Remove the UID_T and GID_T definitions, or change them as required.
- # . Change -DDIRENT to -DSDIRENT.
- # . Add -DSIGTYP=void.
- # . Remove -g from LNKFLAGS.
- # . Add -DNOANSI to remove compiler complaints about ANSI C constructions
- # . Add other -DNOxxx's to save space (e.g. -DNOCSETS)
- # See the next few makefile entries for related examples.
- # Also see sys5r32is for making a portable i386 SVR3 binary.
- is5r3:
- @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix or later...'
- @echo 'If this does not work please read the makefile entry.'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -g -DNOCSETS -DNOREALPATH \
- -DUID_T=ushort -DGID_T=ushort -DI386IX $(KFLAGS)" \
- "LNKFLAGS = -g"
- #Interactive Corp System System V R3 with gcc
- is3gcc:
- @echo 'Making C-Kermit $(CKVER) for Interactive System V R3 / gcc...'
- $(MAKE) wermit CC=gcc CC2=gcc \
- 'CFLAGS = -D_SYSV3 -DISIII -Ddata=datax -DNAP -DHDBUUCP -DNOREALPATH \
- -DLOCK_DIR=\"/usr/spool/uucp\" -DSIGTYP=void -O' "LNKFLAGS ="
- #Interactive UNIX System V R3, POSIX variant. Untested.
- #Uses dirent.h and Honey DanBer uucp. Read comments in is5r3 entry.
- is5r3p:
- @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix or later...'
- $(MAKE) wermit \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -g -DNOCSETS -DNOREALPATH \
- -DI386IX -DPOSIX $(KFLAGS)" "LNKFLAGS=" "LIBS=-lcposix"
- #Interactive UNIX SVR3 2.2.1, job control, curses, no net, gcc.
- is5r3gcc:
- $(MAKE) wermit CC=gcc CC2=gcc \
- "CFLAGS=-g -posix -DSVR3 -DDIRENT -DNOREALPATH \
- -DHDBUUCP -O -DNOCSETS -DI386IX -DSVR3JC -DCK_CURSES \
- $(KFLAGS)" LNKFLAGS="-posix" LIBS="-lcurses -lc_s"
- #Interactive UNIX System V R3 with TCP/IP network support.
- #Needs -linet for net functions. signal() is void rather than int.
- #Uses dirent.h and Honey DanBer uucp. Read comments in is5r3 entry.
- #Also see is5r3net2 if you have trouble with this entry.
- is5r3net:
- @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix...'
- @echo 'If this does not work please read the makefile entry.'
- $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET -DNOREALPATH \
- -DI386IX $(KFLAGS) -O" "LIBS = -linet"
- is5r3netgcc:
- $(MAKE) is5r3net CC=gcc CC2=gcc
- #Interactive UNIX System V R3, no job control, signal() void rather than int.
- #Uses dirent.h and Honey DanBer uucp. Needs -linet for net functions.
- #Read comments in is5r3 entry. Use this entry if is5r3net fails.
- #Saves some space by stripping (-s) and using shared library (-lc_s).
- is5r3net2:
- @echo 'Making C-Kermit $(CKVER) for Interactive 386/ix...'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET -DNOJC -DNOREALPATH \
- -DSIGTYP=void -DNOANSI -DI386IX $(KFLAGS) -O" \
- "LNKFLAGS= -s" "LIBS = -linet -lc_s"
- #Interactive UNIX System V R3 (version 2.2 or later) with job control & curses.
- #Uses dirent.h and Honey DanBer UUCP.
- is5r3jc:
- @echo 'Making C-Kermit $(CKVER) for Interactive Unix 2.2 or later...'
- $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \
- -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES \
- -DPOSIX_JC -DCK_REDIR -DCK_POLL -DDCLGETCWD \
- $(KFLAGS)" "LIBS=-lcurses -lc_s -linet"
- is5r3jcgcc:
- $(MAKE) is5r3jc CC="gcc -DCK_ANSILIBS -DDCGPWNAM -O4" CC2=gcc \
- KFLAGS="$(KFLAGS)" LNKFLAGS="$(LNKFLAGS)"
- #Sunsoft/Interactive UNIX System V R3 (version 2.2 or later)
- #with job control, curses, and TCP/IP networking.
- #Uses dirent.h and Honey DanBer UUCP.
- is5r3netjc:
- @echo 'Making C-Kermit $(CKVER) for Interactive Unix 2.2 or later...'
- $(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS -DNOREALPATH \
- -DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES \
- -DPOSIX_JC -DCK_REDIR -DTCPSOCKET -DSELECT \
- $(KFLAGS)" "LIBS=-linet -lcurses -lc_s"
- is5r3netjcgcc:
- $(MAKE) is5r3netjc CC="gcc -DCK_ANSILIBS -DDCGPWNAM -O4" CC2=gcc \
- KFLAGS="$(KFLAGS)" LNKFLAGS="$(LNKFLAGS)"
- #Masscomp System III
- rtu:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU System III...'
- $(MAKE) wermit \
- "CFLAGS= -UFIONREAD -DATTSV $(KFLAGS) -O" "LNKFLAGS =" "LIBS= -ljobs"
- #Masscomp/Concurrent RTU 4.0 or later, Berkeley environment.
- #Includes <ndir.h> = /usr/include/ndir.h
- #Note "LIBS = -lndir" might not be necessary because of "ucb make".
- rtubsd:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.1A...'
- ucb make wermit \
- "CFLAGS= -DBSD4 -DRTU -DNDIR -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
- "LIBS = -lndir"
- #Masscomp/Concurrent RTU 4.0 or later, same as above,
- #Includes "usr/lib/ndir.h"
- #Note "LIBS = -lndir" might not be necessary because of "ucb make".
- rtubsd2:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.1A...'
- ucb make wermit \
- "CFLAGS= -DBSD4 -DRTU -DXNDIR -DHDBUUCP $(KFLAGS)" \
- "LIBS = -lndir"
- #Masscomp/Concurrent RTU 4.0 or later, same as above,
- #Includes <sys/ndir.h>
- #Note "LIBS = -lndir" might not be necessary because of "ucb make".
- rtubsd3:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.x BSD...'
- ucb make wermit "CFLAGS= -DBSD4 -DRTU -DHDBUUCP $(KFLAGS)" \
- "LIBS = -lndir"
- #Masscomp/Concurrent RTU 4.0 or later, System V R2, using <dirent.h>.
- #In case of problems, add back the -DRTU switch.
- #In case -DTCPSOCKET gives trouble, remove it.
- rtus5:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.x...'
- $(MAKE) wermit \
- "CFLAGS= -DATTSV -DHDBUUCP -DDIRENT -DTCPSOCKET $(KFLAGS)"
- #Masscomp/Concurrent RTU 4.x, System V R3, using <dirent.h>.
- #Use this one if rtus5 gives warnings about pointer type mismatches.
- #In case of problems, add back the -DRTU switch.
- rtus5r3:
- @echo 'Making C-Kermit $(CKVER) for Masscomp RTU Sys V R3...'
- $(MAKE) wermit "CFLAGS= -DSVR3 -DHDBUUCP -DDIRENT $(KFLAGS)"
- #DEC Pro-3xx with Pro/Venix V1.0 or V1.1
- # Requires code-mapping on non-I&D-space 11/23 processor, plus some
- # fiddling to get interrupt targets into resident code section.
- # This almost certainly doesn't work any more.
- provx1:
- @echo 'Making C-Kermit $(CKVER) for DEC Pro-3xx, Pro/Venix 1.x...'
- $(MAKE) wart "CFLAGS= -DPROVX1 $(KFLAGS)" "LNKFLAGS= "
- $(MAKE) wermit "CFLAGS = -DPROVX1 -DNOFILEH -md780" \
- "LNKFLAGS= -u _sleep -lc -md780"
- #Nixdorf Targon/31.
- #AT&T UNIX System V R3, signal() is void rather than int.
- #Uses dirent.h without Honey DanBer uucp.
- t31tos40x:
- @echo 'Making C-Kermit $(CKVER) for Targon/31 with TOS 4.0.xx...'
- $(MAKE) wermit \
- "CFLAGS= -DSVR3 -DDIRENT $(KFLAGS) -O" \
- "LNKFLAGS="
- #NCR Tower 1632, OS 1.02
- tower1:
- @echo 'Making C-Kermit $(CKVER) for NCR Tower 1632, OS 1.02...'
- $(MAKE) wermit "CFLAGS= -DTOWER1 $(KFLAGS)"
- #NCR Tower 32, OS Release 1.xx.xx
- tower32-1:
- @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 Rel 1 System V R2...'
- @echo 'Add KFLAGS=-DISDIRBUG if you get errors about S_ISREG/S_ISDIR.'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV $(KFLAGS) -O" "LNKFLAGS = -n"
- #NCR Tower 32, OS Release 2.xx.xx
- tower32-2:
- @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 Rel 2 System V R2...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -O2" \
- "LNKFLAGS = -n"
- #NCR Tower 32, OS Releases based on System V R3
- #Don't add -DNAP (doesn't work right) or -DRDCHK (not available in libc).
- tower32:
- @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 System V R3...'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNOSYSIOCTLH $(KFLAGS) \
- -DUID_T=ushort -DGID_T=ushort -O1"
- #NCR Tower 32, OS Releases based on System V R3
- tower32g:
- @echo 'Making C-Kermit $(CKVER) for NCR Tower 32 System V R3, gcc...'
- $(MAKE) wermit "CC = gcc" \
- "CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNOSYSIOCTLH $(KFLAGS) \
- DUID_T=ushort -DGID_T=ushort -O -fstrength-reduce -fomit-frame-pointer"
- #Fortune 32:16, For:Pro 1.8 (mostly like 4.1bsd)
- ft18:
- @echo 'Making C-Kermit $(CKVER) for Fortune 32:16 For:Pro 1.8...'
- $(MAKE) wermit \
- "CFLAGS= -DNODEBUG -DBSD4 -DFT18 -DNOFILEH $(KFLAGS) \
- -DPID_T=short"
- #Fortune 32:16, For:Pro 2.1 (mostly like 4.1bsd).
- #The modules that break the optimizer are compiled separately.
- ft21:
- @echo 'Making C-Kermit $(CKVER) for Fortune 32:16 For:Pro 2.1...'
- $(MAKE) ckuusx.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \
- -SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \
- "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
- $(MAKE) ckuxla.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \
- -SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \
- "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
- $(MAKE) ckudia.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \
- -SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \
- "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
- $(MAKE) wermit \
- "CFLAGS= -O -DNODEBUG -DBSD4 -DFT21 -DNOFILEH -SYM 800 \
- -DCK_CURSES $(KFLAGS) -DPID_T=short" \
- "LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
- #Valid Scaldstar
- #Berkeleyish, but need to change some variable names.
- valid:
- @echo 'Making C-Kermit $(CKVER) for Valid Scaldstar...'
- $(MAKE) wermit \
- "CFLAGS= -DBSD4 -DNODEBUG -DNOTLOG -Dcc=ccx -DFREAD=1 $(KFLAGS)"
- #IBM IX/370 on IBM 370 Series mainframes
- #Mostly like sys3, but should buffer packets.
- ix370:
- @echo 'Making C-Kermit $(CKVER) for IBM IX/370...'
- $(MAKE) wermit "CFLAGS = -DIX370 -DATTSV $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
- #Amdahl UTS 2.4 on IBM 370 series compatible mainframes.
- #Mostly like V7, but can't do initrawq() buffer peeking.
- uts24:
- @echo 'Making C-Kermit $(CKVER) for Amdahl UTS 2.4...'
- $(MAKE) wermit "CFLAGS=-DV7 -DPROCNAME=\\\"$(PROC)\\\" \
- -DUTS24 -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
- -DNPTYPE=$(NPTYPE) $(DIRECT) $(KFLAGS)"
- #Amdahl UTSV UNIX System V = System V R2 or earlier.
- utsv:
- @echo 'Making C-Kermit $(CKVER) for Amdahl UTSV...'
- $(MAKE) wermit \
- "CFLAGS = -DUTSV $(KFLAGS) -i -O" "LNKFLAGS = -i"
- #Amdahl UTSV UNIX System V = System V R2 or earlier, with TCP sockets library.
- utsvtcp:
- @echo 'Making C-Kermit $(CKVER) for Amdahl UTSV w/tcp...'
- $(MAKE) wermit "CFLAGS = \
- -DTCPSOCKET -DUTSV $(KFLAGS) -i -O" "LNKFLAGS = -i" \
- "LIBS = -lsocket"
- #BBN C/70 with IOS 2.0
- #Mostly Berkeley-like, but with some ATTisms
- c70:
- @echo 'Making C-Kermit $(CKVER) for BBN C/70 IOS 2.0...'
- $(MAKE) wermit "CFLAGS= -DBSD4 -DC70 $(KFLAGS)"
- #Zilog ZEUS 3.21
- zilog:
- @echo 'Making C-Kermit $(CKVER) for Zilog Zeus 3.21...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DZILOG -DNODEBUG $(KFLAGS) -i -O" \
- "LNKFLAGS = -i -lpw"
- #Whitechapel MG-1 Genix 1.3
- white:
- @echo 'Making C-Kermit $(CKVER) for Whitechapel MG-1 Genix 1.3...'
- @touch ckcpro.c
- $(MAKE) wermit "CFLAGS= -DBSD4 -Dzkself()=0 $(KFLAGS)"
- #Pixel 1000
- pixel:
- @echo 'Making C-Kermit $(CKVER) for Pixel 1000...'
- $(MAKE) wermit "CFLAGS= -DBSD4 -Dzkself()=0 $(KFLAGS)"
- ptx:
- $(MAKE) "MAKE=$(MAKE)" dynixptx12
- #CDC VX/VE 5.2.1
- vxve:
- @echo 'Making C-Kermit $(CKVER) for CDC VX/VE 5.2.1...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DVXVE -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
- #DIAB DS90 or LUXOR ABC-9000 with pre-5.2 DNIX. Sys V with nap() and rdchk().
- # nd = no opendir(), readdir(), closedir(), etc.
- # Some of the modules fail to compile with -O.
- dnixnd:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with very old DNIX 5.2.'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DNAP -DRDCHK -DDCLPOPEN \
- -U__STDC__ $(KFLAGS)"
- #DIAB DS90 with DNIX 5.2. Sys V with nap() and rdchk().
- # This one has opendir(), readdir(), closedir(), etc.
- # Some of the modules fail to compile with -O.
- dnix:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with old DNIX 5.2...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DNAP -DRDCHK -DDIRENT \
- -U__STDC__ $(KFLAGS)"
- #DIAB DS90 with DNIX 5.2. Sys V with nap() and rdchk().
- # As above, but with curses and TCP/IP.
- # You might get complaints about redefinition of O_RDONLY, etc, because
- # of bugs in the DNIX header files, which can be fixed by adding #ifndef...
- # around the offending definitions in the header files.
- dnixnetc:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with old DNIX 5.2...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DNAP -DRDCHK -DDIRENT \
- -DTCPSOCKET -DCK_CURSES -I/usr/include/bsd -U__STDC__ $(KFLAGS)" \
- "LIBS = -ln -lcurses"
- #DIAB DS90 with DNIX 5.3 or later, with HDB UUCP, nap() and rdchk().
- dnix5r3:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
- @echo 'with Honey DanBer UUCP'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
- -DCK_CURSES -DRENAME $(KFLAGS) -O" "LIBS= -lcurses"
- #DIAB DS90 with DNIX 5.3 or later, with HDB UUCP, nap() and rdchk() + TCP/IP
- dnix5r3net:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
- @echo 'with Honey DanBer UUCP and TCP/IP'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
- -DTCPSOCKET -DCK_CURSES -DRENAME $(KFLAGS) -O \
- -I/usr/include/bsd" "LIBS = -ln -lcurses"
- #DIAB DS90 with DNIX 5.3 2.2 or later, with HDB UUCP, nap() and rdchk(),
- #ANSI C compilation and libraries.
- #Note that for DNIX 5.3 2.2 you have to correct a bug in /usr/include/stdlib.h:
- #change "extern void free(char *str);"
- #to "extern void free(void *str);"
- #NOTE: This bug is reportedly fixed in DNIX 5.3 2.2.1.
- #Should you get fatal errors caused by harmless pointer-type mismatches,
- #like between signed and unsigned char, just remove -X7.
- dnix5r3ansi:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
- @echo 'with ANSI C Honey DanBer UUCP'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DDIAB -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
- -DCK_ANSILIBS -DCK_CURSES -DRENAME -O -X7 -X9 $(KFLAGS)" \
- "LIBS= -lcurses"
- #DIAB DS90 with DNIX 5.3 2.2 or later, with HDB UUCP, nap() and rdchk(),
- # + TCP/IP, ANSI C compilation and libraries.
- #Should you get fatal errors caused by harmless pointer-type mismatches,
- #like between signed and unsigned char, just remove -X7.
- dnix5r3ansinet:
- @echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
- @echo 'with ANSI C Honey DanBer UUCP'
- $(MAKE) wermit \
- "CFLAGS = -DSVR3 -DDIAB -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
- -DTCPSOCKET -DCK_ANSILIBS -DCK_CURSES -DRENAME -O -X7 -X9 $(KFLAGS) \
- -I/usr/include/bsd" "LIBS= -ln -lcurses"
- #Ridge 32 with ROS 3.2
- ridge32:
- @echo 'Making C-Kermit $(CKVER) Ridge 32 ROS 3.2'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DNOFILEH -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \
- "LNKFLAGS = -i"
- #Altos 486, 586, or 986 with Xenix 3.0
- altos:
- @echo 'Making C-Kermit $(CKVER) for Altos x86 with Xenix 3.0...'
- $(MAKE) wermit \
- "CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \
- "LNKFLAGS= -i"
- #Altos 986 with Xenix 3.0, as above, but command-line only, minimal size.
- #For systems with small memories. It might also be necessary to chop certain
- #modules up into smaller pieces, e.g. ckuus3-6, because of symbol table
- #overflow. If this makefile is too big or complex for the Altos, compile
- #and link by hand or write shell scripts.
- altosc:
- @echo 'Making C-Kermit $(CKVER) for Altos x86 Xenix 3.0, remote...'
- $(MAKE) wermit \
- "CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG -DNOSCRIPT -DNODIAL \
- -DNOCSETS -DNOANSI -DNOMSEND -DNOSPL -DNOICP $(KFLAGS) -Mm -O" \
- "LNKFLAGS= -Mm -s"
- #Altos 986 with Xenix 3.0, as above, but interactive only, minimal size.
- altosi:
- @echo 'Making C-Kermit $(CKVER) for Altos x86 Xenix 3.0, local...'
- $(MAKE) wermit \
- "CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG -DNOSCRIPT -DNODIAL \
- -DNOCSETS -DNOANSI -DNOMSEND -DNOSPL -DNOCMDL -DNOFRILLS -DNOHELP \
- -DNOSETKEY $(KFLAGS) -Mm -O" "LNKFLAGS= -Mm -s"
- # Altos ACS68000 68000 System, UNIX System 3 Release 2, 512k memory.
- # also needs getcwd() external function; see ckuins.txt file.
- # also, sys/types.h needed modifying:
- # #ifdef __SYS_TYPES_H__, #define ..., #endif
- # also, ckuus2.c MUST be compiled NOOPT else symbol table is destroyed!
- # Submission by Robert Weiner/Programming Plus, rweiner@progplus.com.
- #
- altos3:
- @echo 'Making C-Kermit $(CKVER) for Altos ACS68k UNIX System III'
- $(MAKE) ckuus2.$(EXT) "CFLAGS = -DATTSV -DNOCSETS -DNOSETKEY -DNOJC \
- -DNODIAL -DDCLPOPEN -DNOSCRIPT -DNOHELP $(KFLAGS) -i"
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -DNOCSETS -DNOSETKEY -DNOJC \
- -DNODIAL -DDCLPOPEN -DNOSCRIPT -DNOHELP $(KFLAGS) -i -O" \
- "LNKFLAGS = -i" "LIBS = getcwd.$(EXT)"
- #MINIX - Original PC version with 64K+64K limit.
- # Reportedly, the linker (asld) can run out of space while linking. The only
- # way around this is to make a copy of libc.a from which all modules that are
- # not used by Kermit are removed. If you have trouble compiling or running
- # wart, "touch wart". If that doesn't help, "touch ckcpro.c".
- # The version configured below has no interactive command parser.
- # If you can build this version successfully, maybe there will be room for
- # a minimal interactive command parser too; try replacing -DNOICP with
- # -DNOSPL, plus every other -DNOxxx flag there is, except for -DNOICP
- # (see ckccfg.txt).
- minix:
- @echo 'Making C-Kermit $(CKVER) for MINIX, no command parser...'
- @echo 'TOTALLY UNTESTED!'
- $(MAKE) wermit EXT=s \
- "CFLAGS= -DV7 -DMINIX -i -D_MINIX -D_POSIX_SOURCE \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V \
- -DNOXMIT -DNOMSEND -DNOFRILLS -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
- -DNOSCRIPT -DNOCSETS -DNOICP -DNOSETKEY $(KFLAGS)" \
- "LNKFLAGS= -i -T"
- #MINIX - PC version with 64K+64K limit, new (as yet unreleased) ACK 2.0 beta C
- #compiler, which outputs .o object files, rather than .s. But 'make' still
- #expects .s files, so must be patched to use .o. Tested on Minix 1.5.10.
- minix15:
- @echo 'Making C-Kermit $(CKVER) for MINIX (new ACK 2.0 compiler),'
- @echo 'no command parser... TOTALLY UNTESTED!'
- $(MAKE) wermit \
- "CFLAGS= -DV7 -DMINIX -i -D_MINIX -D_POSIX_SOURCE \
- -DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V -DNODIAL \
- -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS -DNOICP $(KFLAGS)" \
- "LNKFLAGS= -i -T"
- #MINIX3 - MINIX 3.0 (no VM) - May-Aug 2005 (not sure if this ever worked...)
- minix3:
- @echo 'Making C-Kermit $(CKVER) for MINIX3...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DPOSIX -DNOUUCP -DNOLEARN $(KFLAGS) -DMINIX2 \
- -DMINIX3 -DNO_PARAM_H -DNOSYSLOG -DNOGETUSERSHELL \
- -DNOINITGROUPS -DNOFTRUNCATE -DNOARROWKEYS -DDNOREALPATH \
- -DTCPSOCKET -DNOTIMEZONE -DNOFTP -DNO_DNS_SRV -O"
- #MINIX315 - MINIX 3 1.5 - January 2010
- minix315:
- @echo 'Making C-Kermit $(CKVER) for Minix 3 1.5...'
- $(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
- "CFLAGS= -DMINIX315 -DPOSIX -DNOUUCP -DNOJC -DNOLEARN $(KFLAGS) \
- -DHAVE_OPENPTY -DNO_PARAM_H -DNOSYSLOG -DNOGETUSERSHELL \
- -DSYSTIMEH -DNOINITGROUPS -DNOFTRUNCATE -DNOARROWKEYS -DNOREALPATH \
- -DTCPSOCKET -DNOTIMEZONE -DNO_DNS_SRV -DNOFTP -O"
- #PFU Compact A Series UNIX System V R3, SX/A TISP V10/L50 (Japan)
- #Maybe the -i link option should be removed?
- sxae50:
- @echo 'Making C-Kermit $(CKVER) for PFU SX/A V10/L50...'
- $(MAKE) xermit \
- "CFLAGS= -DSVR3 -DDIRENT -DsxaE50 -DTCPSOCKET $(KFLAGS) -i -O" \
- "LNKFLAGS= "
- #Tektronix 6130, 4319, 4301, etc, with UTek OS, /usr/spool/uucp/LCK./...
- #The models that support hardware flow control.
- utek:
- @echo 'Making C-Kermit $(CKVER) for 4.2BSD/UTek, hardware flow control'
- $(MAKE) wermit \
- "CFLAGS= -O -DLCKDIR -DBSD4 -DTCPSOCKET \
- -DUTEK -DDCLPOPEN -DLOCK_DIR=\\\"/usr/spool/uucp/LCK.\\\" \
- -DTRMBUFL=2048 -DCK_DTRCTS $(KFLAGS)"
- #Tektronix 4315, 4316, 4317 with UTek OS, /usr/spool/uucp/LCK./...
- #The models that do not fully support hardware flow control.
- uteknohwfc:
- @echo 'Making C-Kermit $(CKVER) for 4.2BSD/UTek, no h/w flow control'
- $(MAKE) wermit \
- "CFLAGS= -O -DLCKDIR -DBSD4 -DTCPSOCKET \
- -DUTEK -DDCLPOPEN -DLOCK_DIR=\\\"/usr/spool/uucp/LCK.\\\" \
- -DTRMBUFL=2048 $(KFLAGS)"
- #Tektronix XD88 with UTekV OS
- utekvr3:
- @echo 'Making C-Kermit $(CKVER) for Tektronix XD88 UTekV R3...'
- $(MAKE) wermit \
- "CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP \
- -DTCPSOCKET -DSYSUTIMEH -DCK_CURSES $(KFLAGS) -O" \
- "LIBS= -lcurses" "LNKFLAGS= -s"
- #Perkin-Elmer 3200 Xelos R02 or earlier
- ccop1:
- @echo 'Making C-Kermit $(CKVER) for Xelos & Public Domain Dirent calls'
- @echo 'or System V R2 or earlier...'
- $(MAKE) wermit \
- "CFLAGS = -DATTSV -Dvoid=int -DDIRENT -DCK_CURSES \
- $(KFLAGS) -O" "LNKFLAGS =" "LIBS= -lcurses -ltermlib"
- #Encore, UMAX 4.3 (BSD) but without acucntrl program.
- encore:
- $(MAKE) "MAKE=$(MAKE)" umax43 "KFLAGS=$(KFLAGS)"
- #Encore, as above, but with curses file transfer display included.
- encorec:
- $(MAKE) "MAKE=$(MAKE)" umax43 "KFLAGS=-DCK_CURSES $(KFLAGS)" \
- "LIBS= -lcurses -ltermcap"
- #Encore, UMAX 4.3 (BSD) but without acucntrl program.
- umax43:
- @echo Making C-Kermit $(CKVER) for Encore UMAX 4.3...
- $(MAKE) "MAKE=$(MAKE)" PARALLEL=4 xermit \
- "CFLAGS= -DBSD43 -DENCORE -DTCPSOCKET $(KFLAGS) -O"
- #Encore, UMAX 4.2 (BSD)
- umax42:
- @echo Making C-Kermit $(CKVER) for Encore UMAX 4.2...
- $(MAKE) "MAKE=$(MAKE)" PARALLEL=4 xermit \
- "CFLAGS= -DBSD4 -DENCORE -DTCPSOCKET $(KFLAGS) -O"
- #Encore 88K UMAX 5.3 with TCP/IP support
- encore88k:
- @echo 'Making C-Kermit $(CKVER) for Encore 88K UMAX V, TCP/IP...'
- $(MAKE) xermit \
- "CFLAGS = -q ext=pcc -DSVR3 -DTCPSOCKET -DDIRENT \
- -DNOGETID_PROTOS -DHDBUUCP $(KFLAGS) -O" "LNKFLAGS ="
- #Encore 88K UMAX 5.3 with TCP/IP support
- encore88kgcc:
- @echo 'Making C-Kermit $(CKVER) for Encore 88K UMAX V, TCP/IP, gcc...'
- $(MAKE) xermit CC=gcc CC2=gcc \
- "CFLAGS = -DSVR3 -DTCPSOCKET -DDIRENT \
- -DNOGETID_PROTOS -DHDBUUCP $(KFLAGS) -O" "LNKFLAGS ="
- #SONY NEWS, NEWS-OS 4.01C
- sonynews:
- @echo Making C-Kermit $(CKVER) for SONY NEWS-OS 4.01C...
- $(MAKE) xermit "CFLAGS= -DBSD43 -DACUCNTRL -DTCPSOCKET -O"
- #Run Lint on this mess for selected versions.
- #These are pretty much obsolete since ANSI C / gcc.
- lintsun:
- @echo 'Running Lint on C-Kermit $(CKVER) sources for SunOS version...'
- lint -x -DSUNOS4 -DDIRENT -DTCPSOCKET -DSAVEDUID \
- ck[cu]*.c > ckuker.lint.sun
- lintbsd:
- @echo 'Running Lint on C-Kermit $(CKVER) sources for BSD 4.2 version..'
- lint -x -DBSD4 -DTCPSOCKET ck[cu]*.c > ckuker.lint.bsd42
- lints5:
- @echo 'Running Lint on C-Kermit $(CKVER) sources for Sys V version...'
- lint -x -DATTSV ck[cu]*.c > ckuker.lint.s5
- #Who remembers TECO?
- love:
- @echo 'Not war?'
|