reduce-historical/r37/lisp/csl/util/Makefile.vc

###########################################################################
#                                                                         #
# makefile for REDUCE 3.7 using CSL                                       #
#                                                                         #
###########################################################################


###########################################################################
#                                                                         #
# This "makefile" is for Win32 (using Visual C++ from Visual Studio .NET) #
# It has been tested on Visual C++ version 5 too.                         #
#                                                                         #
###########################################################################

# I support use of some (possible) extra variables, passed down
# as     "nmake var=val target"
#
# COMMAND_LINE    generate command line version not windowed one
# DEMO_MODE       demo mode version only
# DEMO_BUILD      version used for building the demo system

!ifdef DEMO_BUILD
CSLEXE    = csl
EXENAME   = demor37b
O         = obj-db
!else
!ifdef COMMAND_LINE
CSLEXE    = cslc
!ifdef DEMO_MODE
EXENAME   = demor37c
O         = obj-dc
!else
EXENAME   = r37c
O         = obj-c
!endif
!else
CSLEXE    = csl
!ifdef DEMO_MODE
EXENAME   = demor37
O         = obj-d
!else
EXENAME   = r37
O         = obj
!endif
!endif
!endif
MAKE      = nmake
CC	  = cl
!ifdef DEMO_MODE
OPTFLAGS  = -Ox2 -G5r -D -MT
!else
OPTFLAGS  = -Ox2 -G5r -MT
!endif
MPIFLAGS  =
!ifdef COMMAND_LINE
CFLAGS 	  = $(OPTFLAGS) -c -W3 -DWINDOWS_NT=1 -I$(CSLBASE) -DCOMMAND_LINE_VERSION=1 $(MPIFLAGS)
!else
CFLAGS	  = $(OPTFLAGS) -c -W3 -DWINDOWS_NT=1 -I$(CSLBASE) -DCWIN=1 $(MPIFLAGS)
!endif
CPP       = cl
CPPFLAGS  = $(CFLAGS)
LINK      = cl
LFLAGS    =
!ifdef COMMAND_LINE
LIBS      = wsock32.lib
TAIL      = -link -subsystem:console
!else
LIBS      = nafxcw.lib wsock32.lib
TAIL      = -link -subsystem:windows
!endif
CSLRES    = csl.res
R37RES    = r37.res
DEMORES   = demored.res
FRONTRES  = r37front.res
OUT       = -o
OUTOBJ    = -Fo
ASM       = $(CC)
ASMFLAGS  = $(CFLAGS)
ASMSRC    = imulvc.c
ASMOBJ    = $(O)\imulvc.obj
ASMOBJDEP = imulvc
!ifdef COMMAND_LINE
SYS       = sysdos
!else
SYS       = syscwin
!endif
WX        =
RM        = del
MKDIR     = mkdir
COPY      = copy
STRIP     = -echo

# The following lines indicates the place on your disc where the "cslbase"
# directory exists. This is the  place where the C sources files for CSL
# live. There are two versions here, the first should use Unix-like
# file name conventions (in particular "/" as a directory separator) while
# the second will (in some cases) be a host-specific translation.

UCSLBASE  = ../cslbase
CSLBASE   = ..\cslbase

###########################################################################
###########################################################################
#                                                                         #
# This is the main bulk of the "makefile" for building Reduce 3.7 and CSL #
# on MSDOS, Windows and Unix.  This part of the file expects a number of  #
# symbols to have been defined:                                           #
#                                                                         #
# CSLBASE   = file-path for CSLBASE directory                             #
# MAKE      = name of "make" utility                                      #
# CC        = The C compiler to use                                       #
# CFLAGS    = Flags for C compiler when compiling CSL                     #
# LINK      = Linker to use                                               #
# LFLAGS    = Flags for linker                                            #
# LIBS      = Libraries to quote to linker                                #
# OUT       = "-o" or "-out:"   See link commands                         #
# OUTOBJ    = "-o" often : where to put object code from C compilation    #
# O         = location to put object files                                #
# ASM       = The assembler to use                                        #
# ASMFLAGS  = Flags for the assembler                                     #
# ASMSRC    = Assembly code source file to use                            #
# ASMOBJ    = Object file for above (or NULL if no assembly used)         #
# ASMOBJDEP = Ditto, but may not be NULL                                  #
# SYS       = name of system-specific file (sysdos or sysnt etc)          #
# RM        = del for DOS, = rm for Unix                                  #
# MKDIR     = mkdir                                                       #
# COPY      = copy for DOS, = cp for Unix                                 #
# STRIP     = echo for DOS, = strip for Unix                              #
# SYMBOLIC  = .SYMBOLIC is using Watcom's "make" utility                  #
# WX        = wx for Windows 3.1, null in all other cases                 #
#                                                                         #
# The master version of this file is called "makebase" and is used to     #
# create both DOS and Unix makefiles.  Use the Codemist "makemake"        #
# program to perform the conversion - eg                                  #
#     makemake -f makebase -o makemake.386 watcom dos                     #
#     makemake -f makebase -o Makefile.sgi sgi                            #
# Just "makemake -f makebase" gives list of systems supported             #
###########################################################################
###########################################################################



###########################################################################
###########################################################################
#
# The main final target is r37.img, the image file for full REDUCE.
# If you want to rebuild stage-by-stage (eg while testing), try the
# sequence
#    make slowr37.exe            compiles and links C coded kernel
#    make slowr37.img            makes bootstrap REDUCE
#                                 (roughly twice as slow as final one)
#                                 only used for system recompilation.
#    make profile                 runs tests, collects profile information.
#                                 This takes a long time!
#    make prof-inst               installs profile data
#    make c-code                  Create files u*.c and u*.lsp
#                                 out of hot-spot parts of REDUCE.
###########################################################################
# Note that only the steps from here downwards are usually needed
#
#    make r37.exe                final compilation of most of REDUCE
#    make r37.img                build final image file
#    make testall                 runs test files, output to log directory
#    make checkall                creates log\checkall.log
#
# (for Windows 95/98/NT only)
#    make r37c.exe                command-line version
#
###########################################################################
###########################################################################


#
# C is another name for CSLBASE, the directory that CSL source files live
# in. I introduce it here mainly because $(C) is so much more compact
# then $(CSLBASE).
#

C =     $(CSLBASE)

#
# DOBJS is a list of all the object files that are common to all variants
# on the system built here
#

DOBJS =		$(O)\arith01.obj $(O)\arith02.obj $(O)\arith03.obj $(O)\arith04.obj \
		$(O)\arith05.obj $(O)\arith06.obj $(O)\arith07.obj $(O)\arith08.obj \
		$(O)\arith09.obj $(O)\arith10.obj $(O)\arith11.obj $(O)\arith12.obj \
		$(O)\char.obj $(O)\csl.obj $(O)\cslmpi.obj $(O)\eval1.obj $(O)\eval2.obj \
		$(O)\eval3.obj $(O)\eval4.obj $(O)\fns1.obj $(O)\fns2.obj $(O)\fns3.obj \
		$(O)\print.obj $(O)\read.obj $(O)\restart.obj $(ASMOBJ) \
!ifdef COMMAND_LINE
                $(O)\$(SYS).obj
!else
		$(O)\$(SYS).obj $(O)\c_applic.obj $(O)\c_text.obj \
		$(O)\c_graph.obj $(O)\c_render.obj $(O)\c_viewpt.obj
!endif

CDOBJS =	$(O)\arith01.obj,$(O)\arith02.obj,$(O)\arith03.obj,$(O)\arith04.obj,\
		$(O)\arith05.obj,$(O)\arith06.obj,$(O)\arith07.obj,$(O)\arith08.obj,\
		$(O)\arith09.obj,$(O)\arith10.obj,$(O)\arith11.obj,$(O)\arith12.obj,\
		$(O)\char.obj,$(O)\csl.obj,$(O)\cslmpi.obj,$(O)\eval1.obj,$(O)\eval2.obj,\
		$(O)\eval3.obj,$(O)\eval4.obj,$(O)\fns1.obj,$(O)\fns2.obj,$(O)\fns3.obj,\
		$(O)\print.obj,$(O)\read.obj,$(O)\restart.obj,$(ASMOBJ),\
!ifdef COMMAND_LINE
		$(O)\$(SYS).obj
!else
		$(O)\$(SYS).obj,$(O)\c_applic.obj,$(O)\c_text.obj,\
		$(O)\c_graph.obj,$(O)\c_render.obj,$(O)\c_viewpt.obj
!endif

#
# OBJS adds in the files used when I am not building a demonstration-mode CSL
#

OBJS =		$(DOBJS) $(O)\fasl.obj $(O)\gc.obj $(O)\preserve.obj

COBJS =		$(CDOBJS),$(O)\fasl.obj,$(O)\gc.obj,$(O)\preserve.obj

#
# UOBJS come from that code that is compiled from Lisp into C
#

UOBJS =		$(O)\u01.obj $(O)\u02.obj $(O)\u03.obj $(O)\u04.obj $(O)\u05.obj \
		$(O)\u06.obj $(O)\u07.obj $(O)\u08.obj $(O)\u09.obj $(O)\u10.obj \
		$(O)\u11.obj $(O)\u12.obj

CUOBJS =	$(O)\u01.obj,$(O)\u02.obj,$(O)\u03.obj,$(O)\u04.obj,$(O)\u05.obj,\
		$(O)\u06.obj,$(O)\u07.obj,$(O)\u08.obj,$(O)\u09.obj,$(O)\u10.obj,\
		$(O)\u11.obj,$(O)\u12.obj


###########################################################################
###########################################################################

# This default target may be a dangerous one to use
# since it supposes that all the C code is up to date already.

default:	$(SYMBOLIC) \
		r37c.exe \
		r37.exe r37.img



###########################################################################
###########################################################################

$(O):
	-$(MKDIR) $(O)

r37.img:	r37.exe
	..\util\full37

$(EXENAME).exe:	$(O)\bytes.obj $(OBJS) \
		$(R37RES) \
		$(UOBJS)
	$(LINK) $(LFLAGS) $(O)\bytes.obj $(OBJS) $(UOBJS) $(R37RES) $(LIBS) $(OUT)$(EXENAME).exe $(TAIL)
	$(STRIP) $(EXENAME).exe
	-$(MKDIR) log

csl.res:	..\util\csl.rc $(C)\cwin.rc
	rc -i..\cslsrc -i$(C) -focsl.res ..\util\csl.rc

r37.res:	..\util\r37.rc $(C)\cwin.rc
	rc -i..\cslsrc -i$(C) -for37.res ..\util\r37.rc

#demored.res:	..\util\demored.rc $(C)\cwin.rc
#	rc -i..\cslsrc -i$(C) -fodemored.res ..\util\demored.rc


# The next few targets are a bit dodgy, but are to help with building
# command-line and demo versions.

!ifndef COMMAND_LINE
r37c.exe:	$(SYMBOLIC)
	$(MAKE) "COMMAND_LINE=YES" r37c.exe

cslc.exe:	$(SYMBOLIC)
	$(MAKE) "COMMAND_LINE=YES" cslc.exe
!endif

!ifndef DEMO_MODE
demor37.exe:	$(SYMBOLIC)
	$(MAKE) "DEMO_MODE=YES" demor37.exe

demor37c.exe:	$(SYMBOLIC)
	$(MAKE) "DEMO_MODE=YES" "COMMAND_LINE=YES" demor37c.exe
!endif

!ifndef DEMO_BUILD
demor37b.exe:	$(SYMBOLIC)
	$(MAKE) "DEMO_BUILD=YES" demor37b.exe

demor37.img:	$(SYMBOLIC)
	REM This is much like the command in ..\util\full37
	start /wait .\demor37b -o demor37.img -z -Dno_init_file ../util/build37.lsp -- log/demor37.log

!endif


#
# A few targets here may help me tidy up my filespace from time to time
#


clean: $(SYMBOLIC)
	-$(RM) slowr37.exe
	-$(RM) slowr37.img
	-$(RM) r37.exe
	-$(RM) r37.img
	-$(RM) csl.exe
	-$(RM) csl.img
	-$(RM) slowr37c.exe
	-$(RM) r37c.exe
	-$(RM) cslc.exe
	-$(RM) *.obj
	-$(MKDIR) log
	-$(RM) log\*.log


###########################################################################


$(CSLEXE).exe:	$(O)\bytes.obj $(OBJS) \
		$(CSLRES) \
		$(O)\stubs.obj
	$(LINK) $(LFLAGS) $(O)\bytes.obj $(OBJS) $(O)\stubs.obj $(CSLRES) $(LIBS) $(OUT)$(CSLEXE).exe $(TAIL)
	$(STRIP) $(CSLEXE).exe

slowr37.exe:	$(O)\bytes1.obj $(OBJS) \
		$(CSLRES) \
		$(O)\stubs.obj
	$(LINK) $(LFLAGS) $(O)\bytes1.obj $(OBJS) $(O)\stubs.obj $(CSLRES) $(LIBS) $(OUT)slowr37.exe $(TAIL)
	$(STRIP) slowr37.exe
	-$(MKDIR) log


slowr37.img:	slowr37.exe
	..\util\boot37

profile:	slowr37.img $(SYMBOLIC)
	..\util\profile

prof-inst:	profile.dat $(SYMBOLIC)
	$(COPY) profile.dat ..\csl-c
	-$(RM) profile.dat

c-code:	slowr37.img $(SYMBOLIC)
	..\util\c-code37

testslow:	slowr37.img $(SYMBOLIC)
	..\util\testslow

testall:	r37.img $(SYMBOLIC)
	..\util\testrest

checkall:	r37.img $(SYMBOLIC)
	..\util\checkall

patchup:	r37.img $(SYMBOLIC)
	..\util\patchup

cleanlog:	$(SYMBOLIC)
	-$(RM) ../../../log/*.rlg



csl.img:	csl.exe $(C)\compat.lsp $(C)\compiler.lsp \
			$(C)\ccomp.lsp $(C)\extras.lsp
	-$(RM) csl.img
	$(WX) csl -v -z $(C)\build0.lsp \
		-D@cslbase="$(C)" -- log\cslimg.log

#
# "make lispfile"
#           recreates compiler.lsp, extras.lsp and ccomp.lsp from
#           the corresponding master sources which are held in RLISP
#           form.  Temporarily builds an RLISP parser on the way.
#       NB: only for system maintainance use.

lispfile:	csl.exe csl.img $(C)\lispfile.lsp $(SYMBOLIC)
	$(WX) csl -v -z $(C)\lispfile.lsp \
		-D@cslbase="$(C)" -- log\lispfile.log

signature:	$(C)\version.hhh register.key $(SYMBOLIC)
	filesign -u $(C)\version.hhh $(C)\version.h Developer or tester


############################################################################
# Now rules for re-compiling the main collection of CSL source files. I
# write each case out individually since that makes the makefile less
# delicate than one that relies on setting up general rules - and I want this
# file to work on several different systems.
#

$(O)\$(ASMOBJDEP).obj:	$(C)\$(ASMSRC) $(O)
	$(ASM) $(ASMFLAGS) $(OUTOBJ)$(ASMOBJ) $(C)\$(ASMSRC)

$(O)\arith01.obj:	$(C)\arith01.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith01.obj $(C)\arith01.c

$(O)\arith02.obj:	$(C)\arith02.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith02.obj $(C)\arith02.c

$(O)\arith03.obj:	$(C)\arith03.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith03.obj $(C)\arith03.c

$(O)\arith04.obj:	$(C)\arith04.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith04.obj $(C)\arith04.c

$(O)\arith05.obj:	$(C)\arith05.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(C)\stream.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith05.obj $(C)\arith05.c

$(O)\arith06.obj:	$(C)\arith06.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith06.obj $(C)\arith06.c

$(O)\arith07.obj:	$(C)\arith07.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith07.obj $(C)\arith07.c

$(O)\arith08.obj:	$(C)\arith08.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith08.obj $(C)\arith08.c

$(O)\arith09.obj:	$(C)\arith09.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith09.obj $(C)\arith09.c

$(O)\arith10.obj:	$(C)\arith10.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith10.obj $(C)\arith10.c

$(O)\arith11.obj:	$(C)\arith11.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith11.obj $(C)\arith11.c

$(O)\arith12.obj:	$(C)\arith12.c $(C)\arith.h $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\arith12.obj $(C)\arith12.c

$(O)\bytes.obj:	$(C)\bytes1.c $(C)\bytes.c $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h \
		$(C)\bytes.h $(C)\arith.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\bytes.obj $(C)\bytes.c

$(O)\bytes1.obj:	$(C)\bytes1.c $(C)\bytes.c $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h \
		$(C)\bytes.h $(C)\arith.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\bytes1.obj $(C)\bytes1.c

#
# The target "bytes1a.o" recompiles bytes1.c, but with the flag set that
# arranges that the number of GET operations performed and the associated
# indicators will be recorded, so that (bytecounts) will display statistics
# about it. This slows things down considerably, but can help when you are in
# the process of deciding which indicators are specified as "fast" ones.
#

$(O)\bytes1a.obj:	$(C)\bytes1.c $(C)\bytes.c $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h \
		$(C)\bytes.h $(C)\arith.h $(O)
	$(CC) $(CFLAGS) -DRECORD_GET=1 $(OUTOBJ)$(O)\bytes1.obj $(C)\bytes1.c

$(O)\char.obj:	$(C)\char.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\char.obj $(C)\char.c

$(O)\csl.obj:	$(C)\csl.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\version.h $(C)\sys.h $(C)\cslerror.h \
		$(C)\entries.h $(C)\stream.h $(C)\sockhdr.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\csl.obj $(C)\csl.c

$(O)\r37front.obj:	$(C)\r37front.c $(C)\tags.h $(C)\machine.h \
		$(C)\externs.h $(C)\version.h $(C)\sys.h \
		$(C)\cslerror.h $(C)\entries.h $(C)\stream.h \
		$(C)\sockhdr.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\r37front.obj $(C)\r37front.c


!ifndef COMMAND_LINE
# the cwin window manager package is for use with Watcom C or
# Microsoft VC++ only

$(O)\c_applic.obj:	$(C)\c_applic.cpp $(C)\cwin.h $(C)\cwin.hpp \
		$(C)\cwinres.h
	$(CPP) $(CPPFLAGS) $(OUTOBJ)$(O)\c_applic.obj $(C)\c_applic.cpp

$(O)\c_applic1.obj:	$(C)\c_applic.cpp $(C)\cwin.h $(C)\cwin.hpp $(C)\cwinres.h
	$(CPP) $(CPPFLAGS) -DDEMOVERSION=1 \
		$(OUTOBJ)$(O)\c_applic1.obj $(C)\c_applic.cpp

$(O)\c_text.obj:	$(C)\c_text.cpp $(C)\cwin.h $(C)\cwin.hpp $(C)\cwinres.h
	$(CPP) $(CPPFLAGS) $(OUTOBJ)$(O)\c_text.obj $(C)\c_text.cpp

$(O)\c_graph.obj:	$(C)\c_graph.cpp $(C)\cwin.h $(C)\cwin.hpp $(C)\cwinres.h
	$(CPP) $(CPPFLAGS) $(OUTOBJ)$(O)\c_graph.obj \
		$(C)\c_graph.cpp

$(O)\c_render.obj:	$(C)\c_render.cpp $(C)\cwin.h $(C)\cwin.hpp $(C)\cwinres.h
	$(CPP) $(CPPFLAGS) $(OUTOBJ)$(O)\c_render.obj $(C)\c_render.cpp

$(O)\c_viewpt.obj:	$(C)\c_viewpt.cpp $(C)\cwin.h $(C)\cwin.hpp $(C)\cwinres.h
	$(CPP) $(CPPFLAGS) $(OUTOBJ)$(O)\c_viewpt.obj \
		$(C)\c_viewpt.cpp

!endif

$(O)\eval1.obj:	$(C)\eval1.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\arith.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\eval1.obj $(C)\eval1.c

$(O)\eval2.obj:	$(C)\eval2.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\arith.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\eval2.obj $(C)\eval2.c

$(O)\eval3.obj:	$(C)\eval3.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\eval3.obj $(C)\eval3.c

$(O)\eval4.obj:	$(C)\eval4.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\arith.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\eval4.obj $(C)\eval4.c

$(O)\fasl.obj:	$(C)\fasl.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\arith.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\fasl.obj $(C)\fasl.c

$(O)\fns1.obj:	$(C)\fns1.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\fns1.obj $(C)\fns1.c

$(O)\fns2.obj:	$(C)\fns2.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\read.h $(C)\entries.h \
		$(C)\sockhdr.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\fns2.obj $(C)\fns2.c

$(O)\fns3.obj:	$(C)\fns3.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\read.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\fns3.obj $(C)\fns3.c

$(O)\gc.obj:	$(C)\gc.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\gc.obj $(C)\gc.c

#
# For each major target I have one file that is system specific - eg
# sysdos.c, sysunix.c, ...
#

$(O)\$(SYS).obj:	$(C)\$(SYS).c $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\fileops.c $(C)\scandir.c $(C)\version.h \
		$(C)\filename.c $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\$(SYS).obj $(C)\$(SYS).c

$(O)\preserve.obj:	$(C)\preserve.c $(C)\tags.h $(C)\machine.h $(C)\stream.h \
		$(C)\externs.h $(C)\sys.h $(C)\cslerror.h $(C)\read.h \
		$(C)\version.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\preserve.obj $(C)\preserve.c

$(O)\print.obj:	$(C)\print.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\read.h \
		$(C)\arith.h $(C)\entries.h $(C)\stream.h $(C)\sockhdr.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\print.obj $(C)\print.c

$(O)\read.obj:	$(C)\read.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\read.h \
		$(C)\arith.h $(C)\entries.h $(C)\stream.h $(C)\sockhdr.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\read.obj $(C)\read.c

$(O)\restart.obj:	$(C)\restart.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\sys.h $(C)\cslerror.h $(C)\read.h $(C)\version.h \
		$(C)\arith.h $(C)\entries.h $(C)\stream.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\restart.obj $(C)\restart.c

$(O)\stubs.obj:	$(C)\stubs.c $(C)\machine.h $(C)\externs.h $(C)\sys.h \
		$(C)\tags.h $(C)\cslerror.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\stubs.obj $(C)\stubs.c

$(O)\cslmpi.obj:	$(C)\cslmpi.c $(C)\machine.h $(C)\externs.h $(C)\sys.h \
		$(C)\mpipack.c $(C)\tags.h $(C)\cslerror.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\cslmpi.obj $(C)\cslmpi.c


###########################################################################

$(O)\u01.obj:	..\csl-c\u01.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u01.obj ..\csl-c\u01.c

$(O)\u02.obj:	..\csl-c\u02.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u02.obj ..\csl-c\u02.c

$(O)\u03.obj:	..\csl-c\u03.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u03.obj ..\csl-c\u03.c

$(O)\u04.obj:	..\csl-c\u04.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u04.obj ..\csl-c\u04.c

$(O)\u05.obj:	..\csl-c\u05.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u05.obj ..\csl-c\u05.c

$(O)\u06.obj:	..\csl-c\u06.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u06.obj ..\csl-c\u06.c

$(O)\u07.obj:	..\csl-c\u07.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u07.obj ..\csl-c\u07.c

$(O)\u08.obj:	..\csl-c\u08.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u08.obj ..\csl-c\u08.c

$(O)\u09.obj:	..\csl-c\u09.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u09.obj ..\csl-c\u09.c

$(O)\u10.obj:	..\csl-c\u10.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u10.obj ..\csl-c\u10.c

$(O)\u11.obj:	..\csl-c\u11.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u11.obj ..\csl-c\u11.c

$(O)\u12.obj:	..\csl-c\u12.c $(C)\tags.h $(C)\machine.h $(C)\externs.h \
		$(C)\cslerror.h $(C)\entries.h $(O)
	$(CC) $(CFLAGS) $(OUTOBJ)$(O)\u12.obj ..\csl-c\u12.c


# end of makefile