123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802 |
- /*
- * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T]
- *
- * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
- *
- * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
- * by Dany Salman <salmandany@yahoo.fr>
- * Copyright (c) 2004 TDF
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
- #include <linux/i2c.h>
- #include <linux/i2c-algo-bit.h>
- #include <linux/init.h>
- #include <linux/interrupt.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/pci.h>
- #include <linux/dma-mapping.h>
- #include <linux/slab.h>
- #include "demux.h"
- #include "dmxdev.h"
- #include "dvb_demux.h"
- #include "dvb_frontend.h"
- #include "dvb_net.h"
- #include "dvbdev.h"
- #include "tda1004x.h"
- DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
- #define DRIVER_NAME "pluto2"
- #define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */
- #define REG_PCAR 0x0020 /* PC address register */
- #define REG_TSCR 0x0024 /* TS ctrl & status */
- #define REG_MISC 0x0028 /* miscellaneous */
- #define REG_MMAC 0x002c /* MSB MAC address */
- #define REG_IMAC 0x0030 /* ISB MAC address */
- #define REG_LMAC 0x0034 /* LSB MAC address */
- #define REG_SPID 0x0038 /* SPI data */
- #define REG_SLCS 0x003c /* serial links ctrl/status */
- #define PID0_NOFIL (0x0001 << 16)
- #define PIDn_ENP (0x0001 << 15)
- #define PID0_END (0x0001 << 14)
- #define PID0_AFIL (0x0001 << 13)
- #define PIDn_PID (0x1fff << 0)
- #define TSCR_NBPACKETS (0x00ff << 24)
- #define TSCR_DEM (0x0001 << 17)
- #define TSCR_DE (0x0001 << 16)
- #define TSCR_RSTN (0x0001 << 15)
- #define TSCR_MSKO (0x0001 << 14)
- #define TSCR_MSKA (0x0001 << 13)
- #define TSCR_MSKL (0x0001 << 12)
- #define TSCR_OVR (0x0001 << 11)
- #define TSCR_AFUL (0x0001 << 10)
- #define TSCR_LOCK (0x0001 << 9)
- #define TSCR_IACK (0x0001 << 8)
- #define TSCR_ADEF (0x007f << 0)
- #define MISC_DVR (0x0fff << 4)
- #define MISC_ALED (0x0001 << 3)
- #define MISC_FRST (0x0001 << 2)
- #define MISC_LED1 (0x0001 << 1)
- #define MISC_LED0 (0x0001 << 0)
- #define SPID_SPIDR (0x00ff << 0)
- #define SLCS_SCL (0x0001 << 7)
- #define SLCS_SDA (0x0001 << 6)
- #define SLCS_CSN (0x0001 << 2)
- #define SLCS_OVR (0x0001 << 1)
- #define SLCS_SWC (0x0001 << 0)
- #define TS_DMA_PACKETS (8)
- #define TS_DMA_BYTES (188 * TS_DMA_PACKETS)
- #define I2C_ADDR_TDA10046 0x10
- #define I2C_ADDR_TUA6034 0xc2
- #define NHWFILTERS 8
- struct pluto {
- /* pci */
- struct pci_dev *pdev;
- u8 __iomem *io_mem;
- /* dvb */
- struct dmx_frontend hw_frontend;
- struct dmx_frontend mem_frontend;
- struct dmxdev dmxdev;
- struct dvb_adapter dvb_adapter;
- struct dvb_demux demux;
- struct dvb_frontend *fe;
- struct dvb_net dvbnet;
- unsigned int full_ts_users;
- unsigned int users;
- /* i2c */
- struct i2c_algo_bit_data i2c_bit;
- struct i2c_adapter i2c_adap;
- unsigned int i2cbug;
- /* irq */
- unsigned int overflow;
- unsigned int dead;
- /* dma */
- dma_addr_t dma_addr;
- u8 dma_buf[TS_DMA_BYTES];
- u8 dummy[4096];
- };
- static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed)
- {
- return container_of(feed->demux, struct pluto, demux);
- }
- static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe)
- {
- return container_of(fe->dvb, struct pluto, dvb_adapter);
- }
- static inline u32 pluto_readreg(struct pluto *pluto, u32 reg)
- {
- return readl(&pluto->io_mem[reg]);
- }
- static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val)
- {
- writel(val, &pluto->io_mem[reg]);
- }
- static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits)
- {
- u32 val = readl(&pluto->io_mem[reg]);
- val &= ~mask;
- val |= bits;
- writel(val, &pluto->io_mem[reg]);
- }
- static void pluto_write_tscr(struct pluto *pluto, u32 val)
- {
- /* set the number of packets */
- val &= ~TSCR_ADEF;
- val |= TS_DMA_PACKETS / 2;
- pluto_writereg(pluto, REG_TSCR, val);
- }
- static void pluto_setsda(void *data, int state)
- {
- struct pluto *pluto = data;
- if (state)
- pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA);
- else
- pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0);
- }
- static void pluto_setscl(void *data, int state)
- {
- struct pluto *pluto = data;
- if (state)
- pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL);
- else
- pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0);
- /* try to detect i2c_inb() to workaround hardware bug:
- * reset SDA to high after SCL has been set to low */
- if ((state) && (pluto->i2cbug == 0)) {
- pluto->i2cbug = 1;
- } else {
- if ((!state) && (pluto->i2cbug == 1))
- pluto_setsda(pluto, 1);
- pluto->i2cbug = 0;
- }
- }
- static int pluto_getsda(void *data)
- {
- struct pluto *pluto = data;
- return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA;
- }
- static int pluto_getscl(void *data)
- {
- struct pluto *pluto = data;
- return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL;
- }
- static void pluto_reset_frontend(struct pluto *pluto, int reenable)
- {
- u32 val = pluto_readreg(pluto, REG_MISC);
- if (val & MISC_FRST) {
- val &= ~MISC_FRST;
- pluto_writereg(pluto, REG_MISC, val);
- }
- if (reenable) {
- val |= MISC_FRST;
- pluto_writereg(pluto, REG_MISC, val);
- }
- }
- static void pluto_reset_ts(struct pluto *pluto, int reenable)
- {
- u32 val = pluto_readreg(pluto, REG_TSCR);
- if (val & TSCR_RSTN) {
- val &= ~TSCR_RSTN;
- pluto_write_tscr(pluto, val);
- }
- if (reenable) {
- val |= TSCR_RSTN;
- pluto_write_tscr(pluto, val);
- }
- }
- static void pluto_set_dma_addr(struct pluto *pluto)
- {
- pluto_writereg(pluto, REG_PCAR, pluto->dma_addr);
- }
- static int pluto_dma_map(struct pluto *pluto)
- {
- pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
- TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
- return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr);
- }
- static void pluto_dma_unmap(struct pluto *pluto)
- {
- pci_unmap_single(pluto->pdev, pluto->dma_addr,
- TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
- }
- static int pluto_start_feed(struct dvb_demux_feed *f)
- {
- struct pluto *pluto = feed_to_pluto(f);
- /* enable PID filtering */
- if (pluto->users++ == 0)
- pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0);
- if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
- pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid);
- else if (pluto->full_ts_users++ == 0)
- pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL);
- return 0;
- }
- static int pluto_stop_feed(struct dvb_demux_feed *f)
- {
- struct pluto *pluto = feed_to_pluto(f);
- /* disable PID filtering */
- if (--pluto->users == 0)
- pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL);
- if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
- pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff);
- else if (--pluto->full_ts_users == 0)
- pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0);
- return 0;
- }
- static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
- {
- /* synchronize the DMA transfer with the CPU
- * first so that we see updated contents. */
- pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr,
- TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
- /* Workaround for broken hardware:
- * [1] On startup NBPACKETS seems to contain an uninitialized value,
- * but no packets have been transferred.
- * [2] Sometimes (actually very often) NBPACKETS stays at zero
- * although one packet has been transferred.
- * [3] Sometimes (actually rarely), the card gets into an erroneous
- * mode where it continuously generates interrupts, claiming it
- * has received nbpackets>TS_DMA_PACKETS packets, but no packet
- * has been transferred. Only a reset seems to solve this
- */
- if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
- unsigned int i = 0;
- while (pluto->dma_buf[i] == 0x47)
- i += 188;
- nbpackets = i / 188;
- if (i == 0) {
- pluto_reset_ts(pluto, 1);
- dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n");
- }
- }
- dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
- /* clear the dma buffer. this is needed to be able to identify
- * new valid ts packets above */
- memset(pluto->dma_buf, 0, nbpackets * 188);
- /* reset the dma address */
- pluto_set_dma_addr(pluto);
- /* sync the buffer and give it back to the card */
- pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr,
- TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
- }
- static irqreturn_t pluto_irq(int irq, void *dev_id)
- {
- struct pluto *pluto = dev_id;
- u32 tscr;
- /* check whether an interrupt occurred on this device */
- tscr = pluto_readreg(pluto, REG_TSCR);
- if (!(tscr & (TSCR_DE | TSCR_OVR)))
- return IRQ_NONE;
- if (tscr == 0xffffffff) {
- if (pluto->dead == 0)
- dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n");
- /* It's dead Jim */
- pluto->dead = 1;
- return IRQ_HANDLED;
- }
- /* dma end interrupt */
- if (tscr & TSCR_DE) {
- pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24);
- /* overflow interrupt */
- if (tscr & TSCR_OVR)
- pluto->overflow++;
- if (pluto->overflow) {
- dev_err(&pluto->pdev->dev, "overflow irq (%d)\n",
- pluto->overflow);
- pluto_reset_ts(pluto, 1);
- pluto->overflow = 0;
- }
- } else if (tscr & TSCR_OVR) {
- pluto->overflow++;
- }
- /* ACK the interrupt */
- pluto_write_tscr(pluto, tscr | TSCR_IACK);
- return IRQ_HANDLED;
- }
- static void pluto_enable_irqs(struct pluto *pluto)
- {
- u32 val = pluto_readreg(pluto, REG_TSCR);
- /* disable AFUL and LOCK interrupts */
- val |= (TSCR_MSKA | TSCR_MSKL);
- /* enable DMA and OVERFLOW interrupts */
- val &= ~(TSCR_DEM | TSCR_MSKO);
- /* clear pending interrupts */
- val |= TSCR_IACK;
- pluto_write_tscr(pluto, val);
- }
- static void pluto_disable_irqs(struct pluto *pluto)
- {
- u32 val = pluto_readreg(pluto, REG_TSCR);
- /* disable all interrupts */
- val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL);
- /* clear pending interrupts */
- val |= TSCR_IACK;
- pluto_write_tscr(pluto, val);
- }
- static int pluto_hw_init(struct pluto *pluto)
- {
- pluto_reset_frontend(pluto, 1);
- /* set automatic LED control by FPGA */
- pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
- /* set data endianness */
- #ifdef __LITTLE_ENDIAN
- pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
- #else
- pluto_rw(pluto, REG_PIDn(0), PID0_END, 0);
- #endif
- /* map DMA and set address */
- pluto_dma_map(pluto);
- pluto_set_dma_addr(pluto);
- /* enable interrupts */
- pluto_enable_irqs(pluto);
- /* reset TS logic */
- pluto_reset_ts(pluto, 1);
- return 0;
- }
- static void pluto_hw_exit(struct pluto *pluto)
- {
- /* disable interrupts */
- pluto_disable_irqs(pluto);
- pluto_reset_ts(pluto, 0);
- /* LED: disable automatic control, enable yellow, disable green */
- pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1);
- /* unmap DMA */
- pluto_dma_unmap(pluto);
- pluto_reset_frontend(pluto, 0);
- }
- static inline u32 divide(u32 numerator, u32 denominator)
- {
- if (denominator == 0)
- return ~0;
- return DIV_ROUND_CLOSEST(numerator, denominator);
- }
- /* LG Innotek TDTE-E001P (Infineon TUA6034) */
- static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe)
- {
- struct dtv_frontend_properties *p = &fe->dtv_property_cache;
- struct pluto *pluto = frontend_to_pluto(fe);
- struct i2c_msg msg;
- int ret;
- u8 buf[4];
- u32 div;
- // Fref = 166.667 Hz
- // Fref * 3 = 500.000 Hz
- // IF = 36166667
- // IF / Fref = 217
- //div = divide(p->frequency + 36166667, 166667);
- div = divide(p->frequency * 3, 500000) + 217;
- buf[0] = (div >> 8) & 0x7f;
- buf[1] = (div >> 0) & 0xff;
- if (p->frequency < 611000000)
- buf[2] = 0xb4;
- else if (p->frequency < 811000000)
- buf[2] = 0xbc;
- else
- buf[2] = 0xf4;
- // VHF: 174-230 MHz
- // center: 350 MHz
- // UHF: 470-862 MHz
- if (p->frequency < 350000000)
- buf[3] = 0x02;
- else
- buf[3] = 0x04;
- if (p->bandwidth_hz == 8000000)
- buf[3] |= 0x08;
- msg.addr = I2C_ADDR_TUA6034 >> 1;
- msg.flags = 0;
- msg.buf = buf;
- msg.len = sizeof(buf);
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- ret = i2c_transfer(&pluto->i2c_adap, &msg, 1);
- if (ret < 0)
- return ret;
- else if (ret == 0)
- return -EREMOTEIO;
- return 0;
- }
- static int pluto2_request_firmware(struct dvb_frontend *fe,
- const struct firmware **fw, char *name)
- {
- struct pluto *pluto = frontend_to_pluto(fe);
- return reject_firmware(fw, name, &pluto->pdev->dev);
- }
- static struct tda1004x_config pluto2_fe_config = {
- .demod_address = I2C_ADDR_TDA10046 >> 1,
- .invert = 1,
- .invert_oclk = 0,
- .xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_DEFAULT,
- .if_freq = TDA10046_FREQ_3617,
- .request_firmware = pluto2_request_firmware,
- };
- static int frontend_init(struct pluto *pluto)
- {
- int ret;
- pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap);
- if (!pluto->fe) {
- dev_err(&pluto->pdev->dev, "could not attach frontend\n");
- return -ENODEV;
- }
- pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params;
- ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe);
- if (ret < 0) {
- if (pluto->fe->ops.release)
- pluto->fe->ops.release(pluto->fe);
- return ret;
- }
- return 0;
- }
- static void pluto_read_rev(struct pluto *pluto)
- {
- u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
- dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
- (val >> 12) & 0x0f, (val >> 4) & 0xff);
- }
- static void pluto_read_mac(struct pluto *pluto, u8 *mac)
- {
- u32 val = pluto_readreg(pluto, REG_MMAC);
- mac[0] = (val >> 8) & 0xff;
- mac[1] = (val >> 0) & 0xff;
- val = pluto_readreg(pluto, REG_IMAC);
- mac[2] = (val >> 8) & 0xff;
- mac[3] = (val >> 0) & 0xff;
- val = pluto_readreg(pluto, REG_LMAC);
- mac[4] = (val >> 8) & 0xff;
- mac[5] = (val >> 0) & 0xff;
- dev_info(&pluto->pdev->dev, "MAC %pM\n", mac);
- }
- static int pluto_read_serial(struct pluto *pluto)
- {
- struct pci_dev *pdev = pluto->pdev;
- unsigned int i, j;
- u8 __iomem *cis;
- cis = pci_iomap(pdev, 1, 0);
- if (!cis)
- return -EIO;
- dev_info(&pdev->dev, "S/N ");
- for (i = 0xe0; i < 0x100; i += 4) {
- u32 val = readl(&cis[i]);
- for (j = 0; j < 32; j += 8) {
- if ((val & 0xff) == 0xff)
- goto out;
- printk("%c", val & 0xff);
- val >>= 8;
- }
- }
- out:
- printk("\n");
- pci_iounmap(pdev, cis);
- return 0;
- }
- static int pluto2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
- {
- struct pluto *pluto;
- struct dvb_adapter *dvb_adapter;
- struct dvb_demux *dvbdemux;
- struct dmx_demux *dmx;
- int ret = -ENOMEM;
- pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL);
- if (!pluto)
- goto out;
- pluto->pdev = pdev;
- ret = pci_enable_device(pdev);
- if (ret < 0)
- goto err_kfree;
- /* enable interrupts */
- pci_write_config_dword(pdev, 0x6c, 0x8000);
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (ret < 0)
- goto err_pci_disable_device;
- pci_set_master(pdev);
- ret = pci_request_regions(pdev, DRIVER_NAME);
- if (ret < 0)
- goto err_pci_disable_device;
- pluto->io_mem = pci_iomap(pdev, 0, 0x40);
- if (!pluto->io_mem) {
- ret = -EIO;
- goto err_pci_release_regions;
- }
- pci_set_drvdata(pdev, pluto);
- ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto);
- if (ret < 0)
- goto err_pci_iounmap;
- ret = pluto_hw_init(pluto);
- if (ret < 0)
- goto err_free_irq;
- /* i2c */
- i2c_set_adapdata(&pluto->i2c_adap, pluto);
- strcpy(pluto->i2c_adap.name, DRIVER_NAME);
- pluto->i2c_adap.owner = THIS_MODULE;
- pluto->i2c_adap.dev.parent = &pdev->dev;
- pluto->i2c_adap.algo_data = &pluto->i2c_bit;
- pluto->i2c_bit.data = pluto;
- pluto->i2c_bit.setsda = pluto_setsda;
- pluto->i2c_bit.setscl = pluto_setscl;
- pluto->i2c_bit.getsda = pluto_getsda;
- pluto->i2c_bit.getscl = pluto_getscl;
- pluto->i2c_bit.udelay = 10;
- pluto->i2c_bit.timeout = 10;
- /* Raise SCL and SDA */
- pluto_setsda(pluto, 1);
- pluto_setscl(pluto, 1);
- ret = i2c_bit_add_bus(&pluto->i2c_adap);
- if (ret < 0)
- goto err_pluto_hw_exit;
- /* dvb */
- ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME,
- THIS_MODULE, &pdev->dev, adapter_nr);
- if (ret < 0)
- goto err_i2c_del_adapter;
- dvb_adapter = &pluto->dvb_adapter;
- pluto_read_rev(pluto);
- pluto_read_serial(pluto);
- pluto_read_mac(pluto, dvb_adapter->proposed_mac);
- dvbdemux = &pluto->demux;
- dvbdemux->filternum = 256;
- dvbdemux->feednum = 256;
- dvbdemux->start_feed = pluto_start_feed;
- dvbdemux->stop_feed = pluto_stop_feed;
- dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
- DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
- ret = dvb_dmx_init(dvbdemux);
- if (ret < 0)
- goto err_dvb_unregister_adapter;
- dmx = &dvbdemux->dmx;
- pluto->hw_frontend.source = DMX_FRONTEND_0;
- pluto->mem_frontend.source = DMX_MEMORY_FE;
- pluto->dmxdev.filternum = NHWFILTERS;
- pluto->dmxdev.demux = dmx;
- ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter);
- if (ret < 0)
- goto err_dvb_dmx_release;
- ret = dmx->add_frontend(dmx, &pluto->hw_frontend);
- if (ret < 0)
- goto err_dvb_dmxdev_release;
- ret = dmx->add_frontend(dmx, &pluto->mem_frontend);
- if (ret < 0)
- goto err_remove_hw_frontend;
- ret = dmx->connect_frontend(dmx, &pluto->hw_frontend);
- if (ret < 0)
- goto err_remove_mem_frontend;
- ret = frontend_init(pluto);
- if (ret < 0)
- goto err_disconnect_frontend;
- dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx);
- out:
- return ret;
- err_disconnect_frontend:
- dmx->disconnect_frontend(dmx);
- err_remove_mem_frontend:
- dmx->remove_frontend(dmx, &pluto->mem_frontend);
- err_remove_hw_frontend:
- dmx->remove_frontend(dmx, &pluto->hw_frontend);
- err_dvb_dmxdev_release:
- dvb_dmxdev_release(&pluto->dmxdev);
- err_dvb_dmx_release:
- dvb_dmx_release(dvbdemux);
- err_dvb_unregister_adapter:
- dvb_unregister_adapter(dvb_adapter);
- err_i2c_del_adapter:
- i2c_del_adapter(&pluto->i2c_adap);
- err_pluto_hw_exit:
- pluto_hw_exit(pluto);
- err_free_irq:
- free_irq(pdev->irq, pluto);
- err_pci_iounmap:
- pci_iounmap(pdev, pluto->io_mem);
- err_pci_release_regions:
- pci_release_regions(pdev);
- err_pci_disable_device:
- pci_disable_device(pdev);
- err_kfree:
- kfree(pluto);
- goto out;
- }
- static void pluto2_remove(struct pci_dev *pdev)
- {
- struct pluto *pluto = pci_get_drvdata(pdev);
- struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
- struct dvb_demux *dvbdemux = &pluto->demux;
- struct dmx_demux *dmx = &dvbdemux->dmx;
- dmx->close(dmx);
- dvb_net_release(&pluto->dvbnet);
- if (pluto->fe)
- dvb_unregister_frontend(pluto->fe);
- dmx->disconnect_frontend(dmx);
- dmx->remove_frontend(dmx, &pluto->mem_frontend);
- dmx->remove_frontend(dmx, &pluto->hw_frontend);
- dvb_dmxdev_release(&pluto->dmxdev);
- dvb_dmx_release(dvbdemux);
- dvb_unregister_adapter(dvb_adapter);
- i2c_del_adapter(&pluto->i2c_adap);
- pluto_hw_exit(pluto);
- free_irq(pdev->irq, pluto);
- pci_iounmap(pdev, pluto->io_mem);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- kfree(pluto);
- }
- #ifndef PCI_VENDOR_ID_SCM
- #define PCI_VENDOR_ID_SCM 0x0432
- #endif
- #ifndef PCI_DEVICE_ID_PLUTO2
- #define PCI_DEVICE_ID_PLUTO2 0x0001
- #endif
- static struct pci_device_id pluto2_id_table[] = {
- {
- .vendor = PCI_VENDOR_ID_SCM,
- .device = PCI_DEVICE_ID_PLUTO2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- }, {
- /* empty */
- },
- };
- MODULE_DEVICE_TABLE(pci, pluto2_id_table);
- static struct pci_driver pluto2_driver = {
- .name = DRIVER_NAME,
- .id_table = pluto2_id_table,
- .probe = pluto2_probe,
- .remove = pluto2_remove,
- };
- module_pci_driver(pluto2_driver);
- MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
- MODULE_DESCRIPTION("Pluto2 driver");
- MODULE_LICENSE("GPL");
|