pluto2.c 19 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802
  1. /*
  2. * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T]
  3. *
  4. * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
  5. *
  6. * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
  7. * by Dany Salman <salmandany@yahoo.fr>
  8. * Copyright (c) 2004 TDF
  9. *
  10. * This program is free software; you can redistribute it and/or modify
  11. * it under the terms of the GNU General Public License as published by
  12. * the Free Software Foundation; either version 2 of the License, or
  13. * (at your option) any later version.
  14. *
  15. * This program is distributed in the hope that it will be useful,
  16. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  18. * GNU General Public License for more details.
  19. *
  20. * You should have received a copy of the GNU General Public License
  21. * along with this program; if not, write to the Free Software
  22. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23. *
  24. */
  25. #include <linux/i2c.h>
  26. #include <linux/i2c-algo-bit.h>
  27. #include <linux/init.h>
  28. #include <linux/interrupt.h>
  29. #include <linux/kernel.h>
  30. #include <linux/module.h>
  31. #include <linux/pci.h>
  32. #include <linux/dma-mapping.h>
  33. #include <linux/slab.h>
  34. #include "demux.h"
  35. #include "dmxdev.h"
  36. #include "dvb_demux.h"
  37. #include "dvb_frontend.h"
  38. #include "dvb_net.h"
  39. #include "dvbdev.h"
  40. #include "tda1004x.h"
  41. DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  42. #define DRIVER_NAME "pluto2"
  43. #define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */
  44. #define REG_PCAR 0x0020 /* PC address register */
  45. #define REG_TSCR 0x0024 /* TS ctrl & status */
  46. #define REG_MISC 0x0028 /* miscellaneous */
  47. #define REG_MMAC 0x002c /* MSB MAC address */
  48. #define REG_IMAC 0x0030 /* ISB MAC address */
  49. #define REG_LMAC 0x0034 /* LSB MAC address */
  50. #define REG_SPID 0x0038 /* SPI data */
  51. #define REG_SLCS 0x003c /* serial links ctrl/status */
  52. #define PID0_NOFIL (0x0001 << 16)
  53. #define PIDn_ENP (0x0001 << 15)
  54. #define PID0_END (0x0001 << 14)
  55. #define PID0_AFIL (0x0001 << 13)
  56. #define PIDn_PID (0x1fff << 0)
  57. #define TSCR_NBPACKETS (0x00ff << 24)
  58. #define TSCR_DEM (0x0001 << 17)
  59. #define TSCR_DE (0x0001 << 16)
  60. #define TSCR_RSTN (0x0001 << 15)
  61. #define TSCR_MSKO (0x0001 << 14)
  62. #define TSCR_MSKA (0x0001 << 13)
  63. #define TSCR_MSKL (0x0001 << 12)
  64. #define TSCR_OVR (0x0001 << 11)
  65. #define TSCR_AFUL (0x0001 << 10)
  66. #define TSCR_LOCK (0x0001 << 9)
  67. #define TSCR_IACK (0x0001 << 8)
  68. #define TSCR_ADEF (0x007f << 0)
  69. #define MISC_DVR (0x0fff << 4)
  70. #define MISC_ALED (0x0001 << 3)
  71. #define MISC_FRST (0x0001 << 2)
  72. #define MISC_LED1 (0x0001 << 1)
  73. #define MISC_LED0 (0x0001 << 0)
  74. #define SPID_SPIDR (0x00ff << 0)
  75. #define SLCS_SCL (0x0001 << 7)
  76. #define SLCS_SDA (0x0001 << 6)
  77. #define SLCS_CSN (0x0001 << 2)
  78. #define SLCS_OVR (0x0001 << 1)
  79. #define SLCS_SWC (0x0001 << 0)
  80. #define TS_DMA_PACKETS (8)
  81. #define TS_DMA_BYTES (188 * TS_DMA_PACKETS)
  82. #define I2C_ADDR_TDA10046 0x10
  83. #define I2C_ADDR_TUA6034 0xc2
  84. #define NHWFILTERS 8
  85. struct pluto {
  86. /* pci */
  87. struct pci_dev *pdev;
  88. u8 __iomem *io_mem;
  89. /* dvb */
  90. struct dmx_frontend hw_frontend;
  91. struct dmx_frontend mem_frontend;
  92. struct dmxdev dmxdev;
  93. struct dvb_adapter dvb_adapter;
  94. struct dvb_demux demux;
  95. struct dvb_frontend *fe;
  96. struct dvb_net dvbnet;
  97. unsigned int full_ts_users;
  98. unsigned int users;
  99. /* i2c */
  100. struct i2c_algo_bit_data i2c_bit;
  101. struct i2c_adapter i2c_adap;
  102. unsigned int i2cbug;
  103. /* irq */
  104. unsigned int overflow;
  105. unsigned int dead;
  106. /* dma */
  107. dma_addr_t dma_addr;
  108. u8 dma_buf[TS_DMA_BYTES];
  109. u8 dummy[4096];
  110. };
  111. static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed)
  112. {
  113. return container_of(feed->demux, struct pluto, demux);
  114. }
  115. static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe)
  116. {
  117. return container_of(fe->dvb, struct pluto, dvb_adapter);
  118. }
  119. static inline u32 pluto_readreg(struct pluto *pluto, u32 reg)
  120. {
  121. return readl(&pluto->io_mem[reg]);
  122. }
  123. static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val)
  124. {
  125. writel(val, &pluto->io_mem[reg]);
  126. }
  127. static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits)
  128. {
  129. u32 val = readl(&pluto->io_mem[reg]);
  130. val &= ~mask;
  131. val |= bits;
  132. writel(val, &pluto->io_mem[reg]);
  133. }
  134. static void pluto_write_tscr(struct pluto *pluto, u32 val)
  135. {
  136. /* set the number of packets */
  137. val &= ~TSCR_ADEF;
  138. val |= TS_DMA_PACKETS / 2;
  139. pluto_writereg(pluto, REG_TSCR, val);
  140. }
  141. static void pluto_setsda(void *data, int state)
  142. {
  143. struct pluto *pluto = data;
  144. if (state)
  145. pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA);
  146. else
  147. pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0);
  148. }
  149. static void pluto_setscl(void *data, int state)
  150. {
  151. struct pluto *pluto = data;
  152. if (state)
  153. pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL);
  154. else
  155. pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0);
  156. /* try to detect i2c_inb() to workaround hardware bug:
  157. * reset SDA to high after SCL has been set to low */
  158. if ((state) && (pluto->i2cbug == 0)) {
  159. pluto->i2cbug = 1;
  160. } else {
  161. if ((!state) && (pluto->i2cbug == 1))
  162. pluto_setsda(pluto, 1);
  163. pluto->i2cbug = 0;
  164. }
  165. }
  166. static int pluto_getsda(void *data)
  167. {
  168. struct pluto *pluto = data;
  169. return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA;
  170. }
  171. static int pluto_getscl(void *data)
  172. {
  173. struct pluto *pluto = data;
  174. return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL;
  175. }
  176. static void pluto_reset_frontend(struct pluto *pluto, int reenable)
  177. {
  178. u32 val = pluto_readreg(pluto, REG_MISC);
  179. if (val & MISC_FRST) {
  180. val &= ~MISC_FRST;
  181. pluto_writereg(pluto, REG_MISC, val);
  182. }
  183. if (reenable) {
  184. val |= MISC_FRST;
  185. pluto_writereg(pluto, REG_MISC, val);
  186. }
  187. }
  188. static void pluto_reset_ts(struct pluto *pluto, int reenable)
  189. {
  190. u32 val = pluto_readreg(pluto, REG_TSCR);
  191. if (val & TSCR_RSTN) {
  192. val &= ~TSCR_RSTN;
  193. pluto_write_tscr(pluto, val);
  194. }
  195. if (reenable) {
  196. val |= TSCR_RSTN;
  197. pluto_write_tscr(pluto, val);
  198. }
  199. }
  200. static void pluto_set_dma_addr(struct pluto *pluto)
  201. {
  202. pluto_writereg(pluto, REG_PCAR, pluto->dma_addr);
  203. }
  204. static int pluto_dma_map(struct pluto *pluto)
  205. {
  206. pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf,
  207. TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
  208. return pci_dma_mapping_error(pluto->pdev, pluto->dma_addr);
  209. }
  210. static void pluto_dma_unmap(struct pluto *pluto)
  211. {
  212. pci_unmap_single(pluto->pdev, pluto->dma_addr,
  213. TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
  214. }
  215. static int pluto_start_feed(struct dvb_demux_feed *f)
  216. {
  217. struct pluto *pluto = feed_to_pluto(f);
  218. /* enable PID filtering */
  219. if (pluto->users++ == 0)
  220. pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0);
  221. if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
  222. pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid);
  223. else if (pluto->full_ts_users++ == 0)
  224. pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL);
  225. return 0;
  226. }
  227. static int pluto_stop_feed(struct dvb_demux_feed *f)
  228. {
  229. struct pluto *pluto = feed_to_pluto(f);
  230. /* disable PID filtering */
  231. if (--pluto->users == 0)
  232. pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL);
  233. if ((f->pid < 0x2000) && (f->index < NHWFILTERS))
  234. pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff);
  235. else if (--pluto->full_ts_users == 0)
  236. pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0);
  237. return 0;
  238. }
  239. static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
  240. {
  241. /* synchronize the DMA transfer with the CPU
  242. * first so that we see updated contents. */
  243. pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr,
  244. TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
  245. /* Workaround for broken hardware:
  246. * [1] On startup NBPACKETS seems to contain an uninitialized value,
  247. * but no packets have been transferred.
  248. * [2] Sometimes (actually very often) NBPACKETS stays at zero
  249. * although one packet has been transferred.
  250. * [3] Sometimes (actually rarely), the card gets into an erroneous
  251. * mode where it continuously generates interrupts, claiming it
  252. * has received nbpackets>TS_DMA_PACKETS packets, but no packet
  253. * has been transferred. Only a reset seems to solve this
  254. */
  255. if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
  256. unsigned int i = 0;
  257. while (pluto->dma_buf[i] == 0x47)
  258. i += 188;
  259. nbpackets = i / 188;
  260. if (i == 0) {
  261. pluto_reset_ts(pluto, 1);
  262. dev_printk(KERN_DEBUG, &pluto->pdev->dev, "resetting TS because of invalid packet counter\n");
  263. }
  264. }
  265. dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets);
  266. /* clear the dma buffer. this is needed to be able to identify
  267. * new valid ts packets above */
  268. memset(pluto->dma_buf, 0, nbpackets * 188);
  269. /* reset the dma address */
  270. pluto_set_dma_addr(pluto);
  271. /* sync the buffer and give it back to the card */
  272. pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr,
  273. TS_DMA_BYTES, PCI_DMA_FROMDEVICE);
  274. }
  275. static irqreturn_t pluto_irq(int irq, void *dev_id)
  276. {
  277. struct pluto *pluto = dev_id;
  278. u32 tscr;
  279. /* check whether an interrupt occurred on this device */
  280. tscr = pluto_readreg(pluto, REG_TSCR);
  281. if (!(tscr & (TSCR_DE | TSCR_OVR)))
  282. return IRQ_NONE;
  283. if (tscr == 0xffffffff) {
  284. if (pluto->dead == 0)
  285. dev_err(&pluto->pdev->dev, "card has hung or been ejected.\n");
  286. /* It's dead Jim */
  287. pluto->dead = 1;
  288. return IRQ_HANDLED;
  289. }
  290. /* dma end interrupt */
  291. if (tscr & TSCR_DE) {
  292. pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24);
  293. /* overflow interrupt */
  294. if (tscr & TSCR_OVR)
  295. pluto->overflow++;
  296. if (pluto->overflow) {
  297. dev_err(&pluto->pdev->dev, "overflow irq (%d)\n",
  298. pluto->overflow);
  299. pluto_reset_ts(pluto, 1);
  300. pluto->overflow = 0;
  301. }
  302. } else if (tscr & TSCR_OVR) {
  303. pluto->overflow++;
  304. }
  305. /* ACK the interrupt */
  306. pluto_write_tscr(pluto, tscr | TSCR_IACK);
  307. return IRQ_HANDLED;
  308. }
  309. static void pluto_enable_irqs(struct pluto *pluto)
  310. {
  311. u32 val = pluto_readreg(pluto, REG_TSCR);
  312. /* disable AFUL and LOCK interrupts */
  313. val |= (TSCR_MSKA | TSCR_MSKL);
  314. /* enable DMA and OVERFLOW interrupts */
  315. val &= ~(TSCR_DEM | TSCR_MSKO);
  316. /* clear pending interrupts */
  317. val |= TSCR_IACK;
  318. pluto_write_tscr(pluto, val);
  319. }
  320. static void pluto_disable_irqs(struct pluto *pluto)
  321. {
  322. u32 val = pluto_readreg(pluto, REG_TSCR);
  323. /* disable all interrupts */
  324. val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL);
  325. /* clear pending interrupts */
  326. val |= TSCR_IACK;
  327. pluto_write_tscr(pluto, val);
  328. }
  329. static int pluto_hw_init(struct pluto *pluto)
  330. {
  331. pluto_reset_frontend(pluto, 1);
  332. /* set automatic LED control by FPGA */
  333. pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED);
  334. /* set data endianness */
  335. #ifdef __LITTLE_ENDIAN
  336. pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END);
  337. #else
  338. pluto_rw(pluto, REG_PIDn(0), PID0_END, 0);
  339. #endif
  340. /* map DMA and set address */
  341. pluto_dma_map(pluto);
  342. pluto_set_dma_addr(pluto);
  343. /* enable interrupts */
  344. pluto_enable_irqs(pluto);
  345. /* reset TS logic */
  346. pluto_reset_ts(pluto, 1);
  347. return 0;
  348. }
  349. static void pluto_hw_exit(struct pluto *pluto)
  350. {
  351. /* disable interrupts */
  352. pluto_disable_irqs(pluto);
  353. pluto_reset_ts(pluto, 0);
  354. /* LED: disable automatic control, enable yellow, disable green */
  355. pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1);
  356. /* unmap DMA */
  357. pluto_dma_unmap(pluto);
  358. pluto_reset_frontend(pluto, 0);
  359. }
  360. static inline u32 divide(u32 numerator, u32 denominator)
  361. {
  362. if (denominator == 0)
  363. return ~0;
  364. return DIV_ROUND_CLOSEST(numerator, denominator);
  365. }
  366. /* LG Innotek TDTE-E001P (Infineon TUA6034) */
  367. static int lg_tdtpe001p_tuner_set_params(struct dvb_frontend *fe)
  368. {
  369. struct dtv_frontend_properties *p = &fe->dtv_property_cache;
  370. struct pluto *pluto = frontend_to_pluto(fe);
  371. struct i2c_msg msg;
  372. int ret;
  373. u8 buf[4];
  374. u32 div;
  375. // Fref = 166.667 Hz
  376. // Fref * 3 = 500.000 Hz
  377. // IF = 36166667
  378. // IF / Fref = 217
  379. //div = divide(p->frequency + 36166667, 166667);
  380. div = divide(p->frequency * 3, 500000) + 217;
  381. buf[0] = (div >> 8) & 0x7f;
  382. buf[1] = (div >> 0) & 0xff;
  383. if (p->frequency < 611000000)
  384. buf[2] = 0xb4;
  385. else if (p->frequency < 811000000)
  386. buf[2] = 0xbc;
  387. else
  388. buf[2] = 0xf4;
  389. // VHF: 174-230 MHz
  390. // center: 350 MHz
  391. // UHF: 470-862 MHz
  392. if (p->frequency < 350000000)
  393. buf[3] = 0x02;
  394. else
  395. buf[3] = 0x04;
  396. if (p->bandwidth_hz == 8000000)
  397. buf[3] |= 0x08;
  398. msg.addr = I2C_ADDR_TUA6034 >> 1;
  399. msg.flags = 0;
  400. msg.buf = buf;
  401. msg.len = sizeof(buf);
  402. if (fe->ops.i2c_gate_ctrl)
  403. fe->ops.i2c_gate_ctrl(fe, 1);
  404. ret = i2c_transfer(&pluto->i2c_adap, &msg, 1);
  405. if (ret < 0)
  406. return ret;
  407. else if (ret == 0)
  408. return -EREMOTEIO;
  409. return 0;
  410. }
  411. static int pluto2_request_firmware(struct dvb_frontend *fe,
  412. const struct firmware **fw, char *name)
  413. {
  414. struct pluto *pluto = frontend_to_pluto(fe);
  415. return reject_firmware(fw, name, &pluto->pdev->dev);
  416. }
  417. static struct tda1004x_config pluto2_fe_config = {
  418. .demod_address = I2C_ADDR_TDA10046 >> 1,
  419. .invert = 1,
  420. .invert_oclk = 0,
  421. .xtal_freq = TDA10046_XTAL_16M,
  422. .agc_config = TDA10046_AGC_DEFAULT,
  423. .if_freq = TDA10046_FREQ_3617,
  424. .request_firmware = pluto2_request_firmware,
  425. };
  426. static int frontend_init(struct pluto *pluto)
  427. {
  428. int ret;
  429. pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap);
  430. if (!pluto->fe) {
  431. dev_err(&pluto->pdev->dev, "could not attach frontend\n");
  432. return -ENODEV;
  433. }
  434. pluto->fe->ops.tuner_ops.set_params = lg_tdtpe001p_tuner_set_params;
  435. ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe);
  436. if (ret < 0) {
  437. if (pluto->fe->ops.release)
  438. pluto->fe->ops.release(pluto->fe);
  439. return ret;
  440. }
  441. return 0;
  442. }
  443. static void pluto_read_rev(struct pluto *pluto)
  444. {
  445. u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR;
  446. dev_info(&pluto->pdev->dev, "board revision %d.%d\n",
  447. (val >> 12) & 0x0f, (val >> 4) & 0xff);
  448. }
  449. static void pluto_read_mac(struct pluto *pluto, u8 *mac)
  450. {
  451. u32 val = pluto_readreg(pluto, REG_MMAC);
  452. mac[0] = (val >> 8) & 0xff;
  453. mac[1] = (val >> 0) & 0xff;
  454. val = pluto_readreg(pluto, REG_IMAC);
  455. mac[2] = (val >> 8) & 0xff;
  456. mac[3] = (val >> 0) & 0xff;
  457. val = pluto_readreg(pluto, REG_LMAC);
  458. mac[4] = (val >> 8) & 0xff;
  459. mac[5] = (val >> 0) & 0xff;
  460. dev_info(&pluto->pdev->dev, "MAC %pM\n", mac);
  461. }
  462. static int pluto_read_serial(struct pluto *pluto)
  463. {
  464. struct pci_dev *pdev = pluto->pdev;
  465. unsigned int i, j;
  466. u8 __iomem *cis;
  467. cis = pci_iomap(pdev, 1, 0);
  468. if (!cis)
  469. return -EIO;
  470. dev_info(&pdev->dev, "S/N ");
  471. for (i = 0xe0; i < 0x100; i += 4) {
  472. u32 val = readl(&cis[i]);
  473. for (j = 0; j < 32; j += 8) {
  474. if ((val & 0xff) == 0xff)
  475. goto out;
  476. printk("%c", val & 0xff);
  477. val >>= 8;
  478. }
  479. }
  480. out:
  481. printk("\n");
  482. pci_iounmap(pdev, cis);
  483. return 0;
  484. }
  485. static int pluto2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
  486. {
  487. struct pluto *pluto;
  488. struct dvb_adapter *dvb_adapter;
  489. struct dvb_demux *dvbdemux;
  490. struct dmx_demux *dmx;
  491. int ret = -ENOMEM;
  492. pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL);
  493. if (!pluto)
  494. goto out;
  495. pluto->pdev = pdev;
  496. ret = pci_enable_device(pdev);
  497. if (ret < 0)
  498. goto err_kfree;
  499. /* enable interrupts */
  500. pci_write_config_dword(pdev, 0x6c, 0x8000);
  501. ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
  502. if (ret < 0)
  503. goto err_pci_disable_device;
  504. pci_set_master(pdev);
  505. ret = pci_request_regions(pdev, DRIVER_NAME);
  506. if (ret < 0)
  507. goto err_pci_disable_device;
  508. pluto->io_mem = pci_iomap(pdev, 0, 0x40);
  509. if (!pluto->io_mem) {
  510. ret = -EIO;
  511. goto err_pci_release_regions;
  512. }
  513. pci_set_drvdata(pdev, pluto);
  514. ret = request_irq(pdev->irq, pluto_irq, IRQF_SHARED, DRIVER_NAME, pluto);
  515. if (ret < 0)
  516. goto err_pci_iounmap;
  517. ret = pluto_hw_init(pluto);
  518. if (ret < 0)
  519. goto err_free_irq;
  520. /* i2c */
  521. i2c_set_adapdata(&pluto->i2c_adap, pluto);
  522. strcpy(pluto->i2c_adap.name, DRIVER_NAME);
  523. pluto->i2c_adap.owner = THIS_MODULE;
  524. pluto->i2c_adap.dev.parent = &pdev->dev;
  525. pluto->i2c_adap.algo_data = &pluto->i2c_bit;
  526. pluto->i2c_bit.data = pluto;
  527. pluto->i2c_bit.setsda = pluto_setsda;
  528. pluto->i2c_bit.setscl = pluto_setscl;
  529. pluto->i2c_bit.getsda = pluto_getsda;
  530. pluto->i2c_bit.getscl = pluto_getscl;
  531. pluto->i2c_bit.udelay = 10;
  532. pluto->i2c_bit.timeout = 10;
  533. /* Raise SCL and SDA */
  534. pluto_setsda(pluto, 1);
  535. pluto_setscl(pluto, 1);
  536. ret = i2c_bit_add_bus(&pluto->i2c_adap);
  537. if (ret < 0)
  538. goto err_pluto_hw_exit;
  539. /* dvb */
  540. ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME,
  541. THIS_MODULE, &pdev->dev, adapter_nr);
  542. if (ret < 0)
  543. goto err_i2c_del_adapter;
  544. dvb_adapter = &pluto->dvb_adapter;
  545. pluto_read_rev(pluto);
  546. pluto_read_serial(pluto);
  547. pluto_read_mac(pluto, dvb_adapter->proposed_mac);
  548. dvbdemux = &pluto->demux;
  549. dvbdemux->filternum = 256;
  550. dvbdemux->feednum = 256;
  551. dvbdemux->start_feed = pluto_start_feed;
  552. dvbdemux->stop_feed = pluto_stop_feed;
  553. dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
  554. DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING);
  555. ret = dvb_dmx_init(dvbdemux);
  556. if (ret < 0)
  557. goto err_dvb_unregister_adapter;
  558. dmx = &dvbdemux->dmx;
  559. pluto->hw_frontend.source = DMX_FRONTEND_0;
  560. pluto->mem_frontend.source = DMX_MEMORY_FE;
  561. pluto->dmxdev.filternum = NHWFILTERS;
  562. pluto->dmxdev.demux = dmx;
  563. ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter);
  564. if (ret < 0)
  565. goto err_dvb_dmx_release;
  566. ret = dmx->add_frontend(dmx, &pluto->hw_frontend);
  567. if (ret < 0)
  568. goto err_dvb_dmxdev_release;
  569. ret = dmx->add_frontend(dmx, &pluto->mem_frontend);
  570. if (ret < 0)
  571. goto err_remove_hw_frontend;
  572. ret = dmx->connect_frontend(dmx, &pluto->hw_frontend);
  573. if (ret < 0)
  574. goto err_remove_mem_frontend;
  575. ret = frontend_init(pluto);
  576. if (ret < 0)
  577. goto err_disconnect_frontend;
  578. dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx);
  579. out:
  580. return ret;
  581. err_disconnect_frontend:
  582. dmx->disconnect_frontend(dmx);
  583. err_remove_mem_frontend:
  584. dmx->remove_frontend(dmx, &pluto->mem_frontend);
  585. err_remove_hw_frontend:
  586. dmx->remove_frontend(dmx, &pluto->hw_frontend);
  587. err_dvb_dmxdev_release:
  588. dvb_dmxdev_release(&pluto->dmxdev);
  589. err_dvb_dmx_release:
  590. dvb_dmx_release(dvbdemux);
  591. err_dvb_unregister_adapter:
  592. dvb_unregister_adapter(dvb_adapter);
  593. err_i2c_del_adapter:
  594. i2c_del_adapter(&pluto->i2c_adap);
  595. err_pluto_hw_exit:
  596. pluto_hw_exit(pluto);
  597. err_free_irq:
  598. free_irq(pdev->irq, pluto);
  599. err_pci_iounmap:
  600. pci_iounmap(pdev, pluto->io_mem);
  601. err_pci_release_regions:
  602. pci_release_regions(pdev);
  603. err_pci_disable_device:
  604. pci_disable_device(pdev);
  605. err_kfree:
  606. kfree(pluto);
  607. goto out;
  608. }
  609. static void pluto2_remove(struct pci_dev *pdev)
  610. {
  611. struct pluto *pluto = pci_get_drvdata(pdev);
  612. struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter;
  613. struct dvb_demux *dvbdemux = &pluto->demux;
  614. struct dmx_demux *dmx = &dvbdemux->dmx;
  615. dmx->close(dmx);
  616. dvb_net_release(&pluto->dvbnet);
  617. if (pluto->fe)
  618. dvb_unregister_frontend(pluto->fe);
  619. dmx->disconnect_frontend(dmx);
  620. dmx->remove_frontend(dmx, &pluto->mem_frontend);
  621. dmx->remove_frontend(dmx, &pluto->hw_frontend);
  622. dvb_dmxdev_release(&pluto->dmxdev);
  623. dvb_dmx_release(dvbdemux);
  624. dvb_unregister_adapter(dvb_adapter);
  625. i2c_del_adapter(&pluto->i2c_adap);
  626. pluto_hw_exit(pluto);
  627. free_irq(pdev->irq, pluto);
  628. pci_iounmap(pdev, pluto->io_mem);
  629. pci_release_regions(pdev);
  630. pci_disable_device(pdev);
  631. kfree(pluto);
  632. }
  633. #ifndef PCI_VENDOR_ID_SCM
  634. #define PCI_VENDOR_ID_SCM 0x0432
  635. #endif
  636. #ifndef PCI_DEVICE_ID_PLUTO2
  637. #define PCI_DEVICE_ID_PLUTO2 0x0001
  638. #endif
  639. static struct pci_device_id pluto2_id_table[] = {
  640. {
  641. .vendor = PCI_VENDOR_ID_SCM,
  642. .device = PCI_DEVICE_ID_PLUTO2,
  643. .subvendor = PCI_ANY_ID,
  644. .subdevice = PCI_ANY_ID,
  645. }, {
  646. /* empty */
  647. },
  648. };
  649. MODULE_DEVICE_TABLE(pci, pluto2_id_table);
  650. static struct pci_driver pluto2_driver = {
  651. .name = DRIVER_NAME,
  652. .id_table = pluto2_id_table,
  653. .probe = pluto2_probe,
  654. .remove = pluto2_remove,
  655. };
  656. module_pci_driver(pluto2_driver);
  657. MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
  658. MODULE_DESCRIPTION("Pluto2 driver");
  659. MODULE_LICENSE("GPL");