1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162 |
- /*
- * wm8962.h -- WM8962 Soc Audio driver platform data
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #ifndef _WM8962_PDATA_H
- #define _WM8962_PDATA_H
- #define WM8962_MAX_GPIO 6
- /* Use to set GPIO default values to zero */
- #define WM8962_GPIO_SET 0x10000
- #define WM8962_GPIO_FN_CLKOUT 0
- #define WM8962_GPIO_FN_LOGIC 1
- #define WM8962_GPIO_FN_SDOUT 2
- #define WM8962_GPIO_FN_IRQ 3
- #define WM8962_GPIO_FN_THERMAL 4
- #define WM8962_GPIO_FN_PLL2_LOCK 6
- #define WM8962_GPIO_FN_PLL3_LOCK 7
- #define WM8962_GPIO_FN_FLL_LOCK 9
- #define WM8962_GPIO_FN_DRC_ACT 10
- #define WM8962_GPIO_FN_WSEQ_DONE 11
- #define WM8962_GPIO_FN_ALC_NG_ACT 12
- #define WM8962_GPIO_FN_ALC_PEAK_LIMIT 13
- #define WM8962_GPIO_FN_ALC_SATURATION 14
- #define WM8962_GPIO_FN_ALC_LEVEL_THR 15
- #define WM8962_GPIO_FN_ALC_LEVEL_LOCK 16
- #define WM8962_GPIO_FN_FIFO_ERR 17
- #define WM8962_GPIO_FN_OPCLK 18
- #define WM8962_GPIO_FN_DMICCLK 19
- #define WM8962_GPIO_FN_DMICDAT 20
- #define WM8962_GPIO_FN_MICD 21
- #define WM8962_GPIO_FN_MICSCD 22
- struct wm8962_pdata {
- struct clk *mclk;
- int gpio_base;
- u32 gpio_init[WM8962_MAX_GPIO];
- /* Setup for microphone detection, raw value to be written to
- * R48(0x30) - only microphone related bits will be updated.
- * Detection may be enabled here for use with signals brought
- * out on the GPIOs. */
- u32 mic_cfg;
- bool irq_active_low;
- bool spk_mono; /* Speaker outputs tied together as mono */
- /**
- * This flag should be set if one or both IN4 inputs is wired
- * in a DC measurement configuration.
- */
- bool in4_dc_measure;
- };
- #endif
|