linux-libre/drivers/net/ethernet/intel/igb/e1000_i210.h

/* Intel(R) Gigabit Ethernet Linux driver
 * Copyright(c) 2007-2014 Intel Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, see <http://www.gnu.org/licenses/>.
 *
 * The full GNU General Public License is included in this distribution in
 * the file called "COPYING".
 *
 * Contact Information:
 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 */

#ifndef _E1000_I210_H_
#define _E1000_I210_H_

s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
s32 igb_valid_led_default_i210(struct e1000_hw *hw, u16 *data);
s32 igb_read_invm_version(struct e1000_hw *hw,
			  struct e1000_fw_version *invm_ver);
s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data);
s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data);
s32 igb_init_nvm_params_i210(struct e1000_hw *hw);
bool igb_get_flash_presence_i210(struct e1000_hw *hw);
s32 igb_pll_workaround_i210(struct e1000_hw *hw);
s32 igb_get_cfg_done_i210(struct e1000_hw *hw);

#define E1000_STM_OPCODE		0xDB00
#define E1000_EEPROM_FLASH_SIZE_WORD	0x11

#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \
	(u8)((invm_dword) & 0x7)
#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \
	(u8)(((invm_dword) & 0x0000FE00) >> 9)
#define INVM_DWORD_TO_WORD_DATA(invm_dword) \
	(u16)(((invm_dword) & 0xFFFF0000) >> 16)

enum E1000_INVM_STRUCTURE_TYPE {
	E1000_INVM_UNINITIALIZED_STRUCTURE		= 0x00,
	E1000_INVM_WORD_AUTOLOAD_STRUCTURE		= 0x01,
	E1000_INVM_CSR_AUTOLOAD_STRUCTURE		= 0x02,
	E1000_INVM_PHY_REGISTER_AUTOLOAD_STRUCTURE	= 0x03,
	E1000_INVM_RSA_KEY_SHA256_STRUCTURE		= 0x04,
	E1000_INVM_INVALIDATED_STRUCTURE		= 0x0F,
};

#define E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS	8
#define E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS	1
#define E1000_INVM_ULT_BYTES_SIZE			8
#define E1000_INVM_RECORD_SIZE_IN_BYTES			4
#define E1000_INVM_VER_FIELD_ONE			0x1FF8
#define E1000_INVM_VER_FIELD_TWO			0x7FE000
#define E1000_INVM_IMGTYPE_FIELD			0x1F800000

#define E1000_INVM_MAJOR_MASK		0x3F0
#define E1000_INVM_MINOR_MASK		0xF
#define E1000_INVM_MAJOR_SHIFT		4

#define ID_LED_DEFAULT_I210		((ID_LED_OFF1_ON2  << 8) | \
					 (ID_LED_DEF1_DEF2 <<  4) | \
					 (ID_LED_OFF1_OFF2))
#define ID_LED_DEFAULT_I210_SERDES	((ID_LED_DEF1_DEF2 << 8) | \
					 (ID_LED_DEF1_DEF2 <<  4) | \
					 (ID_LED_OFF1_ON2))

/* NVM offset defaults for i211 device */
#define NVM_INIT_CTRL_2_DEFAULT_I211	0X7243
#define NVM_INIT_CTRL_4_DEFAULT_I211	0x00C1
#define NVM_LED_1_CFG_DEFAULT_I211	0x0184
#define NVM_LED_0_2_CFG_DEFAULT_I211	0x200C

/* PLL Defines */
#define E1000_PCI_PMCSR			0x44
#define E1000_PCI_PMCSR_D3		0x03
#define E1000_MAX_PLL_TRIES		5
#define E1000_PHY_PLL_UNCONF		0xFF
#define E1000_PHY_PLL_FREQ_PAGE		0xFC
#define E1000_PHY_PLL_FREQ_REG		0x000E
#define E1000_INVM_DEFAULT_AL		0x202F
#define E1000_INVM_AUTOLOAD		0x0A
#define E1000_INVM_PLL_WO_VAL		0x0010

#endif