Jagan Teki 98b68d08fa board: Add Tinker RK3288 board support 6 years ago
..
extlinux.conf 98b68d08fa board: Add Tinker RK3288 board support 6 years ago
genimage.cfg 98b68d08fa board: Add Tinker RK3288 board support 6 years ago
post-build.sh 98b68d08fa board: Add Tinker RK3288 board support 6 years ago
readme.txt 98b68d08fa board: Add Tinker RK3288 board support 6 years ago

readme.txt

Tinker RK3288
=============

Tinker Board is a Single Board Computer (SBC) in an ultra-small form
factor that offers class-leading performance while leveraging outstanding
mechanical compatibility.

Tinker link:
https://www.asus.com/in/Single-Board-Computer/Tinker-Board/

Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288

How to build it
===============

$ make asus_tinker_rk3288_defconfig

Then you can edit the build options using

$ make menuconfig

Compile all and build rootfs image:

$ make

Prepare your SDCard
===================

Buildroot generates a ready-to-use SD card image that you can flash directly to
the card. The image will be in output/images/sdcard.img.
You can write this image directly to an SD card device (i.e. /dev/xxx):

$ sudo dd if=output/images/sdcard.img of=/dev/xxx
$ sudo sync

Finally, you can insert the SD card to the Tinker RK3288 board and boot it.