123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281 |
- // SPDX-License-Identifier: GPL-2.0+
- /*
- * c67x00.h: Cypress C67X00 USB register and field definitions
- *
- * Copyright (C) 2006-2008 Barco N.V.
- * Derived from the Cypress cy7c67200/300 ezusb linux driver and
- * based on multiple host controller drivers inside the linux kernel.
- */
- #ifndef _USB_C67X00_H
- #define _USB_C67X00_H
- #include <linux/spinlock.h>
- #include <linux/platform_device.h>
- #include <linux/completion.h>
- #include <linux/mutex.h>
- /* ---------------------------------------------------------------------
- * Cypress C67x00 register definitions
- */
- /* Hardware Revision Register */
- #define HW_REV_REG 0xC004
- /* General USB registers */
- /* ===================== */
- /* USB Control Register */
- #define USB_CTL_REG(x) ((x) ? 0xC0AA : 0xC08A)
- #define LOW_SPEED_PORT(x) ((x) ? 0x0800 : 0x0400)
- #define HOST_MODE 0x0200
- #define PORT_RES_EN(x) ((x) ? 0x0100 : 0x0080)
- #define SOF_EOP_EN(x) ((x) ? 0x0002 : 0x0001)
- /* USB status register - Notice it has different content in hcd/udc mode */
- #define USB_STAT_REG(x) ((x) ? 0xC0B0 : 0xC090)
- #define EP0_IRQ_FLG 0x0001
- #define EP1_IRQ_FLG 0x0002
- #define EP2_IRQ_FLG 0x0004
- #define EP3_IRQ_FLG 0x0008
- #define EP4_IRQ_FLG 0x0010
- #define EP5_IRQ_FLG 0x0020
- #define EP6_IRQ_FLG 0x0040
- #define EP7_IRQ_FLG 0x0080
- #define RESET_IRQ_FLG 0x0100
- #define SOF_EOP_IRQ_FLG 0x0200
- #define ID_IRQ_FLG 0x4000
- #define VBUS_IRQ_FLG 0x8000
- /* USB Host only registers */
- /* ======================= */
- /* Host n Control Register */
- #define HOST_CTL_REG(x) ((x) ? 0xC0A0 : 0xC080)
- #define PREAMBLE_EN 0x0080 /* Preamble enable */
- #define SEQ_SEL 0x0040 /* Data Toggle Sequence Bit Select */
- #define ISO_EN 0x0010 /* Isochronous enable */
- #define ARM_EN 0x0001 /* Arm operation */
- /* Host n Interrupt Enable Register */
- #define HOST_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
- #define SOF_EOP_IRQ_EN 0x0200 /* SOF/EOP Interrupt Enable */
- #define SOF_EOP_TMOUT_IRQ_EN 0x0800 /* SOF/EOP Timeout Interrupt Enable */
- #define ID_IRQ_EN 0x4000 /* ID interrupt enable */
- #define VBUS_IRQ_EN 0x8000 /* VBUS interrupt enable */
- #define DONE_IRQ_EN 0x0001 /* Done Interrupt Enable */
- /* USB status register */
- #define HOST_STAT_MASK 0x02FD
- #define PORT_CONNECT_CHANGE(x) ((x) ? 0x0020 : 0x0010)
- #define PORT_SE0_STATUS(x) ((x) ? 0x0008 : 0x0004)
- /* Host Frame Register */
- #define HOST_FRAME_REG(x) ((x) ? 0xC0B6 : 0xC096)
- #define HOST_FRAME_MASK 0x07FF
- /* USB Peripheral only registers */
- /* ============================= */
- /* Device n Port Sel reg */
- #define DEVICE_N_PORT_SEL(x) ((x) ? 0xC0A4 : 0xC084)
- /* Device n Interrupt Enable Register */
- #define DEVICE_N_IRQ_EN_REG(x) ((x) ? 0xC0AC : 0xC08C)
- #define DEVICE_N_ENDPOINT_N_CTL_REG(dev, ep) ((dev) \
- ? (0x0280 + (ep << 4)) \
- : (0x0200 + (ep << 4)))
- #define DEVICE_N_ENDPOINT_N_STAT_REG(dev, ep) ((dev) \
- ? (0x0286 + (ep << 4)) \
- : (0x0206 + (ep << 4)))
- #define DEVICE_N_ADDRESS(dev) ((dev) ? (0xC0AE) : (0xC08E))
- /* HPI registers */
- /* ============= */
- /* HPI Status register */
- #define SOFEOP_FLG(x) (1 << ((x) ? 12 : 10))
- #define SIEMSG_FLG(x) (1 << (4 + (x)))
- #define RESET_FLG(x) ((x) ? 0x0200 : 0x0002)
- #define DONE_FLG(x) (1 << (2 + (x)))
- #define RESUME_FLG(x) (1 << (6 + (x)))
- #define MBX_OUT_FLG 0x0001 /* Message out available */
- #define MBX_IN_FLG 0x0100
- #define ID_FLG 0x4000
- #define VBUS_FLG 0x8000
- /* Interrupt routing register */
- #define HPI_IRQ_ROUTING_REG 0x0142
- #define HPI_SWAP_ENABLE(x) ((x) ? 0x0100 : 0x0001)
- #define RESET_TO_HPI_ENABLE(x) ((x) ? 0x0200 : 0x0002)
- #define DONE_TO_HPI_ENABLE(x) ((x) ? 0x0008 : 0x0004)
- #define RESUME_TO_HPI_ENABLE(x) ((x) ? 0x0080 : 0x0040)
- #define SOFEOP_TO_HPI_EN(x) ((x) ? 0x2000 : 0x0800)
- #define SOFEOP_TO_CPU_EN(x) ((x) ? 0x1000 : 0x0400)
- #define ID_TO_HPI_ENABLE 0x4000
- #define VBUS_TO_HPI_ENABLE 0x8000
- /* SIE msg registers */
- #define SIEMSG_REG(x) ((x) ? 0x0148 : 0x0144)
- #define HUSB_TDListDone 0x1000
- #define SUSB_EP0_MSG 0x0001
- #define SUSB_EP1_MSG 0x0002
- #define SUSB_EP2_MSG 0x0004
- #define SUSB_EP3_MSG 0x0008
- #define SUSB_EP4_MSG 0x0010
- #define SUSB_EP5_MSG 0x0020
- #define SUSB_EP6_MSG 0x0040
- #define SUSB_EP7_MSG 0x0080
- #define SUSB_RST_MSG 0x0100
- #define SUSB_SOF_MSG 0x0200
- #define SUSB_CFG_MSG 0x0400
- #define SUSB_SUS_MSG 0x0800
- #define SUSB_ID_MSG 0x4000
- #define SUSB_VBUS_MSG 0x8000
- /* BIOS interrupt routines */
- #define SUSBx_RECEIVE_INT(x) ((x) ? 97 : 81)
- #define SUSBx_SEND_INT(x) ((x) ? 96 : 80)
- #define SUSBx_DEV_DESC_VEC(x) ((x) ? 0x00D4 : 0x00B4)
- #define SUSBx_CONF_DESC_VEC(x) ((x) ? 0x00D6 : 0x00B6)
- #define SUSBx_STRING_DESC_VEC(x) ((x) ? 0x00D8 : 0x00B8)
- #define CY_HCD_BUF_ADDR 0x500 /* Base address for host */
- #define SIE_TD_SIZE 0x200 /* size of the td list */
- #define SIE_TD_BUF_SIZE 0x400 /* size of the data buffer */
- #define SIE_TD_OFFSET(host) ((host) ? (SIE_TD_SIZE+SIE_TD_BUF_SIZE) : 0)
- #define SIE_BUF_OFFSET(host) (SIE_TD_OFFSET(host) + SIE_TD_SIZE)
- /* Base address of HCD + 2 x TD_SIZE + 2 x TD_BUF_SIZE */
- #define CY_UDC_REQ_HEADER_BASE 0x1100
- /* 8- byte request headers for IN/OUT transfers */
- #define CY_UDC_REQ_HEADER_SIZE 8
- #define CY_UDC_REQ_HEADER_ADDR(ep_num) (CY_UDC_REQ_HEADER_BASE + \
- ((ep_num) * CY_UDC_REQ_HEADER_SIZE))
- #define CY_UDC_DESC_BASE_ADDRESS (CY_UDC_REQ_HEADER_ADDR(8))
- #define CY_UDC_BIOS_REPLACE_BASE 0x1800
- #define CY_UDC_REQ_BUFFER_BASE 0x2000
- #define CY_UDC_REQ_BUFFER_SIZE 0x0400
- #define CY_UDC_REQ_BUFFER_ADDR(ep_num) (CY_UDC_REQ_BUFFER_BASE + \
- ((ep_num) * CY_UDC_REQ_BUFFER_SIZE))
- /* ---------------------------------------------------------------------
- * Driver data structures
- */
- struct c67x00_device;
- /**
- * struct c67x00_sie - Common data associated with a SIE
- * @lock: lock to protect this struct and the associated chip registers
- * @private_data: subdriver dependent data
- * @irq: subdriver dependent irq handler, set NULL when not used
- * @dev: link to common driver structure
- * @sie_num: SIE number on chip, starting from 0
- * @mode: SIE mode (host/peripheral/otg/not used)
- */
- struct c67x00_sie {
- /* Entries to be used by the subdrivers */
- spinlock_t lock; /* protect this structure */
- void *private_data;
- void (*irq) (struct c67x00_sie *sie, u16 int_status, u16 msg);
- /* Read only: */
- struct c67x00_device *dev;
- int sie_num;
- int mode;
- };
- #define sie_dev(s) (&(s)->dev->pdev->dev)
- /**
- * struct c67x00_lcp
- */
- struct c67x00_lcp {
- /* Internal use only */
- struct mutex mutex;
- struct completion msg_received;
- u16 last_msg;
- };
- /*
- * struct c67x00_hpi
- */
- struct c67x00_hpi {
- void __iomem *base;
- int regstep;
- spinlock_t lock;
- struct c67x00_lcp lcp;
- };
- #define C67X00_SIES 2
- #define C67X00_PORTS 2
- /**
- * struct c67x00_device - Common data associated with a c67x00 instance
- * @hpi: hpi addresses
- * @sie: array of sie's on this chip
- * @pdev: platform device of instance
- * @pdata: configuration provided by the platform
- */
- struct c67x00_device {
- struct c67x00_hpi hpi;
- struct c67x00_sie sie[C67X00_SIES];
- struct platform_device *pdev;
- struct c67x00_platform_data *pdata;
- };
- /* ---------------------------------------------------------------------
- * Low level interface functions
- */
- /* Host Port Interface (HPI) functions */
- u16 c67x00_ll_hpi_status(struct c67x00_device *dev);
- void c67x00_ll_hpi_reg_init(struct c67x00_device *dev);
- void c67x00_ll_hpi_enable_sofeop(struct c67x00_sie *sie);
- void c67x00_ll_hpi_disable_sofeop(struct c67x00_sie *sie);
- /* General functions */
- u16 c67x00_ll_fetch_siemsg(struct c67x00_device *dev, int sie_num);
- u16 c67x00_ll_get_usb_ctl(struct c67x00_sie *sie);
- void c67x00_ll_usb_clear_status(struct c67x00_sie *sie, u16 bits);
- u16 c67x00_ll_usb_get_status(struct c67x00_sie *sie);
- void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr,
- void *data, int len);
- void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr,
- void *data, int len);
- /* Host specific functions */
- void c67x00_ll_set_husb_eot(struct c67x00_device *dev, u16 value);
- void c67x00_ll_husb_reset(struct c67x00_sie *sie, int port);
- void c67x00_ll_husb_set_current_td(struct c67x00_sie *sie, u16 addr);
- u16 c67x00_ll_husb_get_current_td(struct c67x00_sie *sie);
- u16 c67x00_ll_husb_get_frame(struct c67x00_sie *sie);
- void c67x00_ll_husb_init_host_port(struct c67x00_sie *sie);
- void c67x00_ll_husb_reset_port(struct c67x00_sie *sie, int port);
- /* Called by c67x00_irq to handle lcp interrupts */
- void c67x00_ll_irq(struct c67x00_device *dev, u16 int_status);
- /* Setup and teardown */
- void c67x00_ll_init(struct c67x00_device *dev);
- void c67x00_ll_release(struct c67x00_device *dev);
- int c67x00_ll_reset(struct c67x00_device *dev);
- #endif /* _USB_C67X00_H */
|