123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227 |
- /* SPDX-License-Identifier: GPL-2.0 */
- /*
- * Copyright (C) 2004-2013 Synopsys, Inc. (www.synopsys.com)
- *
- * Registers and bits definitions of ARC EMAC
- */
- #ifndef ARC_EMAC_H
- #define ARC_EMAC_H
- #include <linux/device.h>
- #include <linux/dma-mapping.h>
- #include <linux/netdevice.h>
- #include <linux/phy.h>
- #include <linux/clk.h>
- /* STATUS and ENABLE Register bit masks */
- #define TXINT_MASK (1 << 0) /* Transmit interrupt */
- #define RXINT_MASK (1 << 1) /* Receive interrupt */
- #define ERR_MASK (1 << 2) /* Error interrupt */
- #define TXCH_MASK (1 << 3) /* Transmit chaining error interrupt */
- #define MSER_MASK (1 << 4) /* Missed packet counter error */
- #define RXCR_MASK (1 << 8) /* RXCRCERR counter rolled over */
- #define RXFR_MASK (1 << 9) /* RXFRAMEERR counter rolled over */
- #define RXFL_MASK (1 << 10) /* RXOFLOWERR counter rolled over */
- #define MDIO_MASK (1 << 12) /* MDIO complete interrupt */
- #define TXPL_MASK (1 << 31) /* Force polling of BD by EMAC */
- /* CONTROL Register bit masks */
- #define EN_MASK (1 << 0) /* VMAC enable */
- #define TXRN_MASK (1 << 3) /* TX enable */
- #define RXRN_MASK (1 << 4) /* RX enable */
- #define DSBC_MASK (1 << 8) /* Disable receive broadcast */
- #define ENFL_MASK (1 << 10) /* Enable Full-duplex */
- #define PROM_MASK (1 << 11) /* Promiscuous mode */
- /* Buffer descriptor INFO bit masks */
- #define OWN_MASK (1 << 31) /* 0-CPU or 1-EMAC owns buffer */
- #define FIRST_MASK (1 << 16) /* First buffer in chain */
- #define LAST_MASK (1 << 17) /* Last buffer in chain */
- #define LEN_MASK 0x000007FF /* last 11 bits */
- #define CRLS (1 << 21)
- #define DEFR (1 << 22)
- #define DROP (1 << 23)
- #define RTRY (1 << 24)
- #define LTCL (1 << 28)
- #define UFLO (1 << 29)
- #define FOR_EMAC OWN_MASK
- #define FOR_CPU 0
- /* ARC EMAC register set combines entries for MAC and MDIO */
- enum {
- R_ID = 0,
- R_STATUS,
- R_ENABLE,
- R_CTRL,
- R_POLLRATE,
- R_RXERR,
- R_MISS,
- R_TX_RING,
- R_RX_RING,
- R_ADDRL,
- R_ADDRH,
- R_LAFL,
- R_LAFH,
- R_MDIO,
- };
- #define TX_TIMEOUT (400 * HZ / 1000) /* Transmission timeout */
- #define ARC_EMAC_NAPI_WEIGHT 40 /* Workload for NAPI */
- #define EMAC_BUFFER_SIZE 1536 /* EMAC buffer size */
- /**
- * struct arc_emac_bd - EMAC buffer descriptor (BD).
- *
- * @info: Contains status information on the buffer itself.
- * @data: 32-bit byte addressable pointer to the packet data.
- */
- struct arc_emac_bd {
- __le32 info;
- dma_addr_t data;
- };
- /* Number of Rx/Tx BD's */
- #define RX_BD_NUM 128
- #define TX_BD_NUM 128
- #define RX_RING_SZ (RX_BD_NUM * sizeof(struct arc_emac_bd))
- #define TX_RING_SZ (TX_BD_NUM * sizeof(struct arc_emac_bd))
- /**
- * struct buffer_state - Stores Rx/Tx buffer state.
- * @sk_buff: Pointer to socket buffer.
- * @addr: Start address of DMA-mapped memory region.
- * @len: Length of DMA-mapped memory region.
- */
- struct buffer_state {
- struct sk_buff *skb;
- DEFINE_DMA_UNMAP_ADDR(addr);
- DEFINE_DMA_UNMAP_LEN(len);
- };
- struct arc_emac_mdio_bus_data {
- struct gpio_desc *reset_gpio;
- int msec;
- };
- /**
- * struct arc_emac_priv - Storage of EMAC's private information.
- * @dev: Pointer to the current device.
- * @phy_dev: Pointer to attached PHY device.
- * @bus: Pointer to the current MII bus.
- * @regs: Base address of EMAC memory-mapped control registers.
- * @napi: Structure for NAPI.
- * @rxbd: Pointer to Rx BD ring.
- * @txbd: Pointer to Tx BD ring.
- * @rxbd_dma: DMA handle for Rx BD ring.
- * @txbd_dma: DMA handle for Tx BD ring.
- * @rx_buff: Storage for Rx buffers states.
- * @tx_buff: Storage for Tx buffers states.
- * @txbd_curr: Index of Tx BD to use on the next "ndo_start_xmit".
- * @txbd_dirty: Index of Tx BD to free on the next Tx interrupt.
- * @last_rx_bd: Index of the last Rx BD we've got from EMAC.
- * @link: PHY's last seen link state.
- * @duplex: PHY's last set duplex mode.
- * @speed: PHY's last set speed.
- */
- struct arc_emac_priv {
- const char *drv_name;
- const char *drv_version;
- void (*set_mac_speed)(void *priv, unsigned int speed);
- /* Devices */
- struct device *dev;
- struct mii_bus *bus;
- struct arc_emac_mdio_bus_data bus_data;
- void __iomem *regs;
- struct clk *clk;
- struct napi_struct napi;
- struct arc_emac_bd *rxbd;
- struct arc_emac_bd *txbd;
- dma_addr_t rxbd_dma;
- dma_addr_t txbd_dma;
- struct buffer_state rx_buff[RX_BD_NUM];
- struct buffer_state tx_buff[TX_BD_NUM];
- unsigned int txbd_curr;
- unsigned int txbd_dirty;
- unsigned int last_rx_bd;
- unsigned int link;
- unsigned int duplex;
- unsigned int speed;
- unsigned int rx_missed_errors;
- };
- /**
- * arc_reg_set - Sets EMAC register with provided value.
- * @priv: Pointer to ARC EMAC private data structure.
- * @reg: Register offset from base address.
- * @value: Value to set in register.
- */
- static inline void arc_reg_set(struct arc_emac_priv *priv, int reg, int value)
- {
- iowrite32(value, priv->regs + reg * sizeof(int));
- }
- /**
- * arc_reg_get - Gets value of specified EMAC register.
- * @priv: Pointer to ARC EMAC private data structure.
- * @reg: Register offset from base address.
- *
- * returns: Value of requested register.
- */
- static inline unsigned int arc_reg_get(struct arc_emac_priv *priv, int reg)
- {
- return ioread32(priv->regs + reg * sizeof(int));
- }
- /**
- * arc_reg_or - Applies mask to specified EMAC register - ("reg" | "mask").
- * @priv: Pointer to ARC EMAC private data structure.
- * @reg: Register offset from base address.
- * @mask: Mask to apply to specified register.
- *
- * This function reads initial register value, then applies provided mask
- * to it and then writes register back.
- */
- static inline void arc_reg_or(struct arc_emac_priv *priv, int reg, int mask)
- {
- unsigned int value = arc_reg_get(priv, reg);
- arc_reg_set(priv, reg, value | mask);
- }
- /**
- * arc_reg_clr - Applies mask to specified EMAC register - ("reg" & ~"mask").
- * @priv: Pointer to ARC EMAC private data structure.
- * @reg: Register offset from base address.
- * @mask: Mask to apply to specified register.
- *
- * This function reads initial register value, then applies provided mask
- * to it and then writes register back.
- */
- static inline void arc_reg_clr(struct arc_emac_priv *priv, int reg, int mask)
- {
- unsigned int value = arc_reg_get(priv, reg);
- arc_reg_set(priv, reg, value & ~mask);
- }
- int arc_mdio_probe(struct arc_emac_priv *priv);
- int arc_mdio_remove(struct arc_emac_priv *priv);
- int arc_emac_probe(struct net_device *ndev, int interface);
- int arc_emac_remove(struct net_device *ndev);
- #endif /* ARC_EMAC_H */
|