123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175 |
- /*
- * Copyright 2016 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation (the "GPL").
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License version 2 (GPLv2) for more details.
- *
- * You should have received a copy of the GNU General Public License
- * version 2 (GPLv2) along with this source code.
- */
- /*
- * This file contains SPU message definitions specific to SPU-M.
- */
- #ifndef _SPUM_H_
- #define _SPUM_H_
- #define SPU_CRYPTO_OPERATION_GENERIC 0x1
- /* Length of STATUS field in tx and rx packets */
- #define SPU_TX_STATUS_LEN 4
- /* SPU-M error codes */
- #define SPU_STATUS_MASK 0x0000FF00
- #define SPU_STATUS_SUCCESS 0x00000000
- #define SPU_STATUS_INVALID_ICV 0x00000100
- #define SPU_STATUS_ERROR_FLAG 0x00020000
- /* Request message. MH + EMH + BDESC + BD header */
- #define SPU_REQ_FIXED_LEN 24
- /*
- * Max length of a SPU message header. Used to allocate a buffer where
- * the SPU message header is constructed. Can be used for either a SPU-M
- * header or a SPU2 header.
- * For SPU-M, sum of the following:
- * MH - 4 bytes
- * EMH - 4
- * SCTX - 3 +
- * max auth key len - 64
- * max cipher key len - 264 (RC4)
- * max IV len - 16
- * BDESC - 12
- * BD header - 4
- * Total: 371
- *
- * For SPU2, FMD_SIZE (32) plus lengths of hash and cipher keys,
- * hash and cipher IVs. If SPU2 does not support RC4, then
- */
- #define SPU_HEADER_ALLOC_LEN (SPU_REQ_FIXED_LEN + MAX_KEY_SIZE + \
- MAX_KEY_SIZE + MAX_IV_SIZE)
- /*
- * Response message header length. Normally MH, EMH, BD header, but when
- * BD_SUPPRESS is used for hash requests, there is no BD header.
- */
- #define SPU_RESP_HDR_LEN 12
- #define SPU_HASH_RESP_HDR_LEN 8
- /*
- * Max value that can be represented in the Payload Length field of the BD
- * header. This is a 16-bit field.
- */
- #define SPUM_NS2_MAX_PAYLOAD (BIT(16) - 1)
- /*
- * NSP SPU is limited to ~9KB because of FA2 FIFO size limitations;
- * Set MAX_PAYLOAD to 8k to allow for addition of header, digest, etc.
- * and stay within limitation.
- */
- #define SPUM_NSP_MAX_PAYLOAD 8192
- /* Buffer Descriptor Header [BDESC]. SPU in big-endian mode. */
- struct BDESC_HEADER {
- u16 offset_mac; /* word 0 [31-16] */
- u16 length_mac; /* word 0 [15-0] */
- u16 offset_crypto; /* word 1 [31-16] */
- u16 length_crypto; /* word 1 [15-0] */
- u16 offset_icv; /* word 2 [31-16] */
- u16 offset_iv; /* word 2 [15-0] */
- };
- /* Buffer Data Header [BD]. SPU in big-endian mode. */
- struct BD_HEADER {
- u16 size;
- u16 prev_length;
- };
- /* Command Context Header. SPU-M in big endian mode. */
- struct MHEADER {
- u8 flags; /* [31:24] */
- u8 op_code; /* [23:16] */
- u16 reserved; /* [15:0] */
- };
- /* MH header flags bits */
- #define MH_SUPDT_PRES BIT(0)
- #define MH_HASH_PRES BIT(2)
- #define MH_BD_PRES BIT(3)
- #define MH_MFM_PRES BIT(4)
- #define MH_BDESC_PRES BIT(5)
- #define MH_SCTX_PRES BIT(7)
- /* SCTX word 0 bit offsets and fields masks */
- #define SCTX_SIZE 0x000000FF
- /* SCTX word 1 bit shifts and field masks */
- #define UPDT_OFST 0x000000FF /* offset of SCTX updateable fld */
- #define HASH_TYPE 0x00000300 /* hash alg operation type */
- #define HASH_TYPE_SHIFT 8
- #define HASH_MODE 0x00001C00 /* one of spu2_hash_mode */
- #define HASH_MODE_SHIFT 10
- #define HASH_ALG 0x0000E000 /* hash algorithm */
- #define HASH_ALG_SHIFT 13
- #define CIPHER_TYPE 0x00030000 /* encryption operation type */
- #define CIPHER_TYPE_SHIFT 16
- #define CIPHER_MODE 0x001C0000 /* encryption mode */
- #define CIPHER_MODE_SHIFT 18
- #define CIPHER_ALG 0x00E00000 /* encryption algo */
- #define CIPHER_ALG_SHIFT 21
- #define ICV_IS_512 BIT(27)
- #define ICV_IS_512_SHIFT 27
- #define CIPHER_ORDER BIT(30)
- #define CIPHER_ORDER_SHIFT 30
- #define CIPHER_INBOUND BIT(31)
- #define CIPHER_INBOUND_SHIFT 31
- /* SCTX word 2 bit shifts and field masks */
- #define EXP_IV_SIZE 0x7
- #define IV_OFFSET BIT(3)
- #define IV_OFFSET_SHIFT 3
- #define GEN_IV BIT(5)
- #define GEN_IV_SHIFT 5
- #define EXPLICIT_IV BIT(6)
- #define EXPLICIT_IV_SHIFT 6
- #define SCTX_IV BIT(7)
- #define SCTX_IV_SHIFT 7
- #define ICV_SIZE 0x0F00
- #define ICV_SIZE_SHIFT 8
- #define CHECK_ICV BIT(12)
- #define CHECK_ICV_SHIFT 12
- #define INSERT_ICV BIT(13)
- #define INSERT_ICV_SHIFT 13
- #define BD_SUPPRESS BIT(19)
- #define BD_SUPPRESS_SHIFT 19
- /* Generic Mode Security Context Structure [SCTX] */
- struct SCTX {
- /* word 0: protocol flags */
- u32 proto_flags;
- /* word 1: cipher flags */
- u32 cipher_flags;
- /* word 2: Extended cipher flags */
- u32 ecf;
- };
- struct SPUHEADER {
- struct MHEADER mh;
- u32 emh;
- struct SCTX sa;
- };
- #endif /* _SPUM_H_ */
|