123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353 |
- /* linux/drivers/char/pc8736x_gpio.c
- National Semiconductor PC8736x GPIO driver. Allows a user space
- process to play with the GPIO pins.
- Copyright (c) 2005,2006 Jim Cromie <jim.cromie@gmail.com>
- adapted from linux/drivers/char/scx200_gpio.c
- Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>,
- */
- #include <linux/fs.h>
- #include <linux/module.h>
- #include <linux/errno.h>
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/cdev.h>
- #include <linux/io.h>
- #include <linux/ioport.h>
- #include <linux/mutex.h>
- #include <linux/nsc_gpio.h>
- #include <linux/platform_device.h>
- #include <linux/uaccess.h>
- #define DEVNAME "pc8736x_gpio"
- MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
- MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver");
- MODULE_LICENSE("GPL");
- static int major; /* default to dynamic major */
- module_param(major, int, 0);
- MODULE_PARM_DESC(major, "Major device number");
- static DEFINE_MUTEX(pc8736x_gpio_config_lock);
- static unsigned pc8736x_gpio_base;
- static u8 pc8736x_gpio_shadow[4];
- #define SIO_BASE1 0x2E /* 1st command-reg to check */
- #define SIO_BASE2 0x4E /* alt command-reg to check */
- #define SIO_SID 0x20 /* SuperI/O ID Register */
- #define SIO_SID_PC87365 0xe5 /* Expected value in ID Register for PC87365 */
- #define SIO_SID_PC87366 0xe9 /* Expected value in ID Register for PC87366 */
- #define SIO_CF1 0x21 /* chip config, bit0 is chip enable */
- #define PC8736X_GPIO_RANGE 16 /* ioaddr range */
- #define PC8736X_GPIO_CT 32 /* minors matching 4 8 bit ports */
- #define SIO_UNIT_SEL 0x7 /* unit select reg */
- #define SIO_UNIT_ACT 0x30 /* unit enable */
- #define SIO_GPIO_UNIT 0x7 /* unit number of GPIO */
- #define SIO_VLM_UNIT 0x0D
- #define SIO_TMS_UNIT 0x0E
- /* config-space addrs to read/write each unit's runtime addr */
- #define SIO_BASE_HADDR 0x60
- #define SIO_BASE_LADDR 0x61
- /* GPIO config-space pin-control addresses */
- #define SIO_GPIO_PIN_SELECT 0xF0
- #define SIO_GPIO_PIN_CONFIG 0xF1
- #define SIO_GPIO_PIN_EVENT 0xF2
- static unsigned char superio_cmd = 0;
- static unsigned char selected_device = 0xFF; /* bogus start val */
- /* GPIO port runtime access, functionality */
- static int port_offset[] = { 0, 4, 8, 10 }; /* non-uniform offsets ! */
- /* static int event_capable[] = { 1, 1, 0, 0 }; ports 2,3 are hobbled */
- #define PORT_OUT 0
- #define PORT_IN 1
- #define PORT_EVT_EN 2
- #define PORT_EVT_STST 3
- static struct platform_device *pdev; /* use in dev_*() */
- static inline void superio_outb(int addr, int val)
- {
- outb_p(addr, superio_cmd);
- outb_p(val, superio_cmd + 1);
- }
- static inline int superio_inb(int addr)
- {
- outb_p(addr, superio_cmd);
- return inb_p(superio_cmd + 1);
- }
- static int pc8736x_superio_present(void)
- {
- int id;
- /* try the 2 possible values, read a hardware reg to verify */
- superio_cmd = SIO_BASE1;
- id = superio_inb(SIO_SID);
- if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366)
- return superio_cmd;
- superio_cmd = SIO_BASE2;
- id = superio_inb(SIO_SID);
- if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366)
- return superio_cmd;
- return 0;
- }
- static void device_select(unsigned devldn)
- {
- superio_outb(SIO_UNIT_SEL, devldn);
- selected_device = devldn;
- }
- static void select_pin(unsigned iminor)
- {
- /* select GPIO port/pin from device minor number */
- device_select(SIO_GPIO_UNIT);
- superio_outb(SIO_GPIO_PIN_SELECT,
- ((iminor << 1) & 0xF0) | (iminor & 0x7));
- }
- static inline u32 pc8736x_gpio_configure_fn(unsigned index, u32 mask, u32 bits,
- u32 func_slct)
- {
- u32 config, new_config;
- mutex_lock(&pc8736x_gpio_config_lock);
- device_select(SIO_GPIO_UNIT);
- select_pin(index);
- /* read current config value */
- config = superio_inb(func_slct);
- /* set new config */
- new_config = (config & mask) | bits;
- superio_outb(func_slct, new_config);
- mutex_unlock(&pc8736x_gpio_config_lock);
- return config;
- }
- static u32 pc8736x_gpio_configure(unsigned index, u32 mask, u32 bits)
- {
- return pc8736x_gpio_configure_fn(index, mask, bits,
- SIO_GPIO_PIN_CONFIG);
- }
- static int pc8736x_gpio_get(unsigned minor)
- {
- int port, bit, val;
- port = minor >> 3;
- bit = minor & 7;
- val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
- val >>= bit;
- val &= 1;
- dev_dbg(&pdev->dev, "_gpio_get(%d from %x bit %d) == val %d\n",
- minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit,
- val);
- return val;
- }
- static void pc8736x_gpio_set(unsigned minor, int val)
- {
- int port, bit, curval;
- minor &= 0x1f;
- port = minor >> 3;
- bit = minor & 7;
- curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
- dev_dbg(&pdev->dev, "addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n",
- pc8736x_gpio_base + port_offset[port] + PORT_OUT,
- curval, bit, (curval & ~(1 << bit)), val, (val << bit));
- val = (curval & ~(1 << bit)) | (val << bit);
- dev_dbg(&pdev->dev, "gpio_set(minor:%d port:%d bit:%d)"
- " %2x -> %2x\n", minor, port, bit, curval, val);
- outb_p(val, pc8736x_gpio_base + port_offset[port] + PORT_OUT);
- curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
- val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
- dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val);
- pc8736x_gpio_shadow[port] = val;
- }
- static int pc8736x_gpio_current(unsigned minor)
- {
- int port, bit;
- minor &= 0x1f;
- port = minor >> 3;
- bit = minor & 7;
- return ((pc8736x_gpio_shadow[port] >> bit) & 0x01);
- }
- static void pc8736x_gpio_change(unsigned index)
- {
- pc8736x_gpio_set(index, !pc8736x_gpio_current(index));
- }
- static struct nsc_gpio_ops pc8736x_gpio_ops = {
- .owner = THIS_MODULE,
- .gpio_config = pc8736x_gpio_configure,
- .gpio_dump = nsc_gpio_dump,
- .gpio_get = pc8736x_gpio_get,
- .gpio_set = pc8736x_gpio_set,
- .gpio_change = pc8736x_gpio_change,
- .gpio_current = pc8736x_gpio_current
- };
- static int pc8736x_gpio_open(struct inode *inode, struct file *file)
- {
- unsigned m = iminor(inode);
- file->private_data = &pc8736x_gpio_ops;
- dev_dbg(&pdev->dev, "open %d\n", m);
- if (m >= PC8736X_GPIO_CT)
- return -EINVAL;
- return nonseekable_open(inode, file);
- }
- static const struct file_operations pc8736x_gpio_fileops = {
- .owner = THIS_MODULE,
- .open = pc8736x_gpio_open,
- .write = nsc_gpio_write,
- .read = nsc_gpio_read,
- .llseek = no_llseek,
- };
- static void __init pc8736x_init_shadow(void)
- {
- int port;
- /* read the current values driven on the GPIO signals */
- for (port = 0; port < 4; ++port)
- pc8736x_gpio_shadow[port]
- = inb_p(pc8736x_gpio_base + port_offset[port]
- + PORT_OUT);
- }
- static struct cdev pc8736x_gpio_cdev;
- static int __init pc8736x_gpio_init(void)
- {
- int rc;
- dev_t devid;
- pdev = platform_device_alloc(DEVNAME, 0);
- if (!pdev)
- return -ENOMEM;
- rc = platform_device_add(pdev);
- if (rc) {
- rc = -ENODEV;
- goto undo_platform_dev_alloc;
- }
- dev_info(&pdev->dev, "NatSemi pc8736x GPIO Driver Initializing\n");
- if (!pc8736x_superio_present()) {
- rc = -ENODEV;
- dev_err(&pdev->dev, "no device found\n");
- goto undo_platform_dev_add;
- }
- pc8736x_gpio_ops.dev = &pdev->dev;
- /* Verify that chip and it's GPIO unit are both enabled.
- My BIOS does this, so I take minimum action here
- */
- rc = superio_inb(SIO_CF1);
- if (!(rc & 0x01)) {
- rc = -ENODEV;
- dev_err(&pdev->dev, "device not enabled\n");
- goto undo_platform_dev_add;
- }
- device_select(SIO_GPIO_UNIT);
- if (!superio_inb(SIO_UNIT_ACT)) {
- rc = -ENODEV;
- dev_err(&pdev->dev, "GPIO unit not enabled\n");
- goto undo_platform_dev_add;
- }
- /* read the GPIO unit base addr that chip responds to */
- pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8
- | superio_inb(SIO_BASE_LADDR));
- if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) {
- rc = -ENODEV;
- dev_err(&pdev->dev, "GPIO ioport %x busy\n",
- pc8736x_gpio_base);
- goto undo_platform_dev_add;
- }
- dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base);
- if (major) {
- devid = MKDEV(major, 0);
- rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME);
- } else {
- rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME);
- major = MAJOR(devid);
- }
- if (rc < 0) {
- dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc);
- goto undo_request_region;
- }
- if (!major) {
- major = rc;
- dev_dbg(&pdev->dev, "got dynamic major %d\n", major);
- }
- pc8736x_init_shadow();
- /* ignore minor errs, and succeed */
- cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops);
- cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT);
- return 0;
- undo_request_region:
- release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
- undo_platform_dev_add:
- platform_device_del(pdev);
- undo_platform_dev_alloc:
- platform_device_put(pdev);
- return rc;
- }
- static void __exit pc8736x_gpio_cleanup(void)
- {
- dev_dbg(&pdev->dev, "cleanup\n");
- cdev_del(&pc8736x_gpio_cdev);
- unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT);
- release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
- platform_device_unregister(pdev);
- }
- module_init(pc8736x_gpio_init);
- module_exit(pc8736x_gpio_cleanup);
|